MACH 3 WATERJET SERIES

THE WORLD’S MOST POPULAR WATERJET

 CUTTING HEAD TECHNOLOGY PRESSURE = PRODUCTIVITY

The physics are simple and the results are conclusive: the
faster your waterjet stream moves, the faster you can cut.
UNMATCHED WATERJET A faster waterjet stream also uses less abrasive.

PROVEN AT A COMPETITIVE PRICE Cut Faster | Lower Costs | Increase Production

PERFORMANCE PURE WATERJET STANDARD WATERJET

MACH 3 2513b
*See additional sizes and
Whether you are prototyping one-off parts or producing large
quantities of parts, higher pressure will get your job done
specifications on back significantly faster and at an overall lower cost.
Thousands of installations Hair-thin pure waterjet Uses garnet abrasive to cut
worldwide have earned stream cuts soft materials. virtually any hard material.
our Mach 3 the title of
“The World’s Most Popular
Waterjet.” More importantly,
reliable performance, day in SMARTSTREAM™ TECHNOLOGY
and day out is what means
Our exclusive SmartStream technology uses patented complex
the most to our customers, mathematical models that automatically adjust your cutting
DYNAMIC WATERJET ®
DYNAMIC XD stream based on the material parameters you choose. Simply
and the Mach 3 consistently
Three times faster and more The accuracy and speed of Dynamic select your material type and thickness from the library of over
delivers proven results. accurate than Standard Waterjet. Waterjet brought to the 3D world. 100 tested and pre-programmed materials. SmartStream will
calculate the correct speed and angles to provide you with a
precise part at the fastest speed possible.

DYNAMIC WATERJET®—DYNAMICALLY SUPERIOR PARTS

A PUMP FOR EVERY APPLICATION Our patented Dynamic Waterjet works unlike any other system.
Using our SmartStream technology, Dynamic Waterjet not only
counters stream lag and taper (characteristics inherent to
waterjet), but also automatically tilts and monitors the speed
of your cutting head on the fly. This ensures the part you pick up
HYPERJET® off the table is cut as quickly as possible, and to high precision.
6,500 BAR [94,000 PSI]
■■ Exacting precision:
With pressures rated at an industry +/- .0254 mm [+/- .001 in]
leading 6,500 bar [94,000 psi] and ■■ Up to 3x faster than
continuous operating pressures of standard systems
6,000 bar [87,000 psi], HyperJet
pumps provide maximum productivity.

94,000 PSI
THE WORLD’S MOST POPULAR WATERJET
6,500 BAR
INTENSIFIER
4,150 BAR [60,000 PSI] DYNAMIC WATERJET® XD—DYNAMICALLY SUPERIOR PARTS
With continuous operating pressure
at 4,150 bar [60,000 psi], this is the Dynamic XD incorporates the unique capabilities of SmartStream
60,000 PSI longest lasting, lowest maintenance technology and Dynamic Waterjet for bevel cutting. This
4,150 BAR ultrahigh-pressure pump in the industry. distinctive Flow technology can cut with 5-axis motion, even
cutting compound angles with improved speed and accuracy.
Easily cut flat stock with up to +/- 60º of motion.
55,000 PSI Test cut for safety required on all formed and 3D parts.
3,800 BAR RUGGED PREMIUM ULTIMATE PASER CUTTING COMPREHENSIVE ROLL-AROUND
MECHANICAL DESIGN MOTION SYSTEM ACCESSIBILITY SYSTEM SOFTWARE SUITES CONTROL
HYPLEX® PRIME
Heavy-duty two piece Precision ball screw with Open design with full Reliable abrasive delivery Easy to use FlowMaster® Convenient roll-around
PRESSURE = PRODUCTIVITY 4,150 BAR [60,000 PSI]
steel construction. Laser spin-the-nut technology worktable access on and cutting package that and FlowXpert™ software operating console easily
With pressures rated at 4,150 bar calibrated and ball bar and high-resolution three sides for easy precisely meters abrasive suites allow you to reaches your entire work
Flow offers the widest array of high-pressure
[60,000 psi] and continuous operating inspected. digital drives provides loading and unloading and provides perfect program a part in envelope. All diagnostics
pumps. Each is fully integrated with sensor pressures of 3,800 bar [55,000 psi], highly accurate, quick of material. stream alignment. minutes—virtually any from your integrated
driven diagnostics that are monitored by the HyPlex Prime pumps are the highest movement. material, any thickness. waterjet are displayed
Mach 3 operator station. pressure, most advanced direct drive on your PC.
pumps available today.
 UNITED STATES & CANADA
23500 64th Avenue South
Kent, Washington 98032 USA
Tel: 253-850-3500
TOLL-FREE: 800-446-3569
Fax: 253-813-3285
info@flowcorp.com

CENTRAL AMERICA, SOUTH AMERICA,

MEXICO & CARIBBEAN
Tel: +55-11-3616-2822
flowlatino@flowlatino.com

1. m
[4. 3 m– –7.3 EUROPE, MIDDLE EAST & AFRICA
3f
t–6 2 m 1.3 m –24 ft]
3 f t Tel: +49-7252-538-0
.6
ft] [4.
info-germany@flowcorp.com

TAIWAN, CHINA, KOREA, SOUTHEAST ASIA,

AUSTRALIA & NEW ZEALAND
Linear Straightness .0381 mm per 1 m 0.0015 in per 3 ft Tel: +886-3-577-2102
Accuracy sales@flowasia.com.tw

© 2011 Flow International Corporation. All Rights Reserved. Specification and depictions are correct at time of printing. Flow reserves the right to make specification and design changes. Version 0514.
Cut Speed 7.6 m/min Up to 300 ipm
JAPAN
Traverse Speed 12.7 m/min Up to 500 ipm
Tel: +81-52-701-7021
Repeatability .050 mm .002 in fjc@flowjapan.co.jp
Z Travel 178 mm 7 in
Sizes FlowWaterjet.com
1313b 1.3 m x 1.3 m 4 ft x 4 ft
2513b 2.5 m x 1.3 m 8 ft x 4 ft
3020b 3mx2m 10 ft x 6.5 ft
4020b 4mx2m 13 ft x 6.5 ft
7320b 7.3 m x 2 m 24 ft x 6.5 ft

ADDITIONAL OPTIONS &

ACCESSORIES
■■ Operator Convenience Package
■■ FlowTeach™ with Wireless Pendant
■■ HydroClean™ Abrasive Removal System
■■ UltraPierce™ Material Piercing Assist
■■ Laser Edge Finder
■■ FlowNest® Software
■■ FlowShift Vectorization Software
■■ High-Pressure Pump Option up to 6,500 bar [94,000 psi]
■■ ProXtract™ Part Removal Wand
■■ And More