A True Global Presence: Manual Clamping

A TRUE GLOBAL PRESENCE
Through a constant commitment to the Team DE-STA-CO philosophy, we draw from our
worldwide pool of information and resources to offer the highest levels of service to each
of our customers, regardless of geographic location. Our status as a truly global company
empowers us to improve the global competitiveness of your operations. Whatever your
automation or workholding need, Team DE-STA-CO has the best possible solution.
WORKHOLDING SOLUTIONS
ABOUT DE-STA-CO DE-STA-CO LEAN INITIATIVE
DE-STA-CO, a Dover Company, was founded in 1915. The DE-STA-CO family of companies is committed to
In 1936 the company designed and manufactured the being a lean resource for its customers, providing
first manual toggle clamp. ways to eliminate waste in manufacturing processes
Innovations, quality and acquisitions have made through the use of optimal clamping and automation
DE-STA-CO the worldwide leader in the design, solutions that eliminate bottlenecks.
MANUAL CLAMPING
manufacture and support of clamping, gripping, DE-STA-CO’s wide range of products allows the
transferring and robotic tooling solutions for company to offer its customers an Automation
TECHNOLOGY
workplace and flexible automation needs. Continuum providing solutions that increase
TM
WORKHOLDING SOLUTIONS
The family of brands has enabled DE-STA-CO to profitability and efficiency, while reducing waste.
establish leading productivity improvement and cost-
reduction manufacturing solutions for our customers
using the breadth of products and value-added PRODUCT WARRANTY
services we offer. All DE-STA-CO Industrial Products are thoroughly
inspected and tested. We fully guarantee all materials
Our customer base covers a wide range of industries and workmanship to be free of defects. Any product
that is found to be defective in design, material or
requiring a global customer service network offering workmanship in the course of its normal use will be
consistent solutions and program support. With over promptly replaced.
85 years of experience, DE-STA-CO brings a quality This Warranty does not apply to any product where
philosophy unsurpassed by its counterparts. the failure is a result of misapplication or abuse, nor
is there any Warranty expressed or implied as to the
merchantability or fitness for a particular purpose of
the product and any warranty is limited to the above PNEUMATIC CLAMPING
express warranty.
This Warranty is null and void if the product is
TECHNOLOGY
repaired, modified or altered in any way.
DE-STA-CO is not liable for labor, special, direct,
incidental, or consequential damages and under no
circumstances any charges in excess of the invoice
amount of the product proven to be defective.
Fall 2008
1025 Doris Road
Auburn Hills, MI 48326 HYDRAULIC CLAMPING
Phone: 1.248.836.6750 TECHNOLOGY
1.888.DESTACO
Fax: 1.248.836.6743
Fall 2008
1.800.682.9686
P o s i t i o n i n g o u r c u s t o m e r s f o r p r o d u c t i v i t y.
Email: cs-workholding@destaco.com
© Copyright, 2010 DE-STA-CO. All rights for layout, photos and text Web: www.destaco.com
rest with the publisher DE-STA-CO. All photomechanical or other reproductions www.destaco.com
only with our express permission. All sales are based on our terms and
conditions of sale, delivery and payment. DGS11/07:WS_07:Rev07/10 15K Positioning our customers for productivity.
New Products
Manual Clamping Technology
NEW Our new 2000 Series Horizontal Hold-Down Action Clamps
provide unmatched performance and ergonomics.
So many reasons to choose DE-STA-CO.
Series 2002, 2007, 2010: Models 6015-M, 6015-MR:
Next generation vertical Compact and robust
toggle clamp Page 4.9, 4.10
Page 2.7
Bushings at Key Pivot Points Increased Hand Clearance
• Provide long life and smooth operation • Improves ergonomics and safety
Robust Design
• Offers an average of twice
Series 2013, 2017, 2027, 2037: Model 603-R:
the holding capacity of our
Next generation horizontal With additional safety lock legacy models
toggle clamp Page 4.12
• Low arm deflection under Long Handle
Page 3.5 load provides greater stiffness
• Increased operator
comfort
Optional Pre-load
• Eliminates arm play for
Models 305-UR, 307-UR, 309-UR: Models 95030, 95040, locating applications
With additional safety lock 95050, 95060:
Page 3.17 Low-profile straight-line
action clamps
Page 4.21
DE-STA-CO Toggle®
Lock Plus
Models 6001-M, 6001-MSS: • Locks handle in open

and closed positions
50% higher holding capacity
• Available standard
Page 4.4, 8.12
or as an add-on kit
Fixed Handle Pivot
Common Hole Pattern Low Pivot Point • Eliminates sticking points
• Interchangeable with • Provides perpendicular • Provides smooth action

legacy clamp models clamping force
DE-STA-CO’s new 2000 Series Horizontal Hold-Down Action

Clamps offer an average of twice the holding capacity of our
legacy models in the same envelope.
Flexibility. Safety. Performance.
www.destaco.com 1.888.DESTACO Po s i t i o n i n g o u r c u s t o m e r s f o r p r o d u c t i v i t y.
1.2 DE-STA-CO
New Products
NEW
Models 3011,3011-SS: Models 425, 435, 445 and 470:

Heavy-duty, cast latch clamp For rugged clamping applications
Page 6.5 Pages 7.7, 7.8, 7.9, 7.11
Models 353, 359: Models 603-SS, 6015-MSS:

Parting line clamp for molding New models in stainless steel
applications Pages 8.13, 8.14
Page 6.19
Pneumatic Clamping Technology

NEW
Models 8021, 8071, 8101: Series 89R:

Enclosed clamp for harsh Slim line of pneumatic
environments swing clamps
Page 11.11 Page 12.16
Model 8031: Series 82L:

Enclosed clamp for harsh Enclosed automation power clamp
environments Page 14.18
Page 11.20
DE-STA-CO 1.3
DE-STA-CO DE-STA-CO
Workholding Quality Policy
Solutions
NEW
Look for this logo throughout the DE-STA-CO provides quality
Workholding Solutions catalog to see products and services.
all our NEW clamping products.
DE-STA-CO has an effective

quality system.
DE-STA-CO works with

quality suppliers.
DE-STA-CO has a culture

of continuous improvement.
DE-STA-CO is committed
to on-time delivery.
DE-STA-CO is committed
to meeting or exceeding
customer requirements.
Po s i t i o n i n g o u r c u s t o m e r s f o r p r o d u c t i v i t y.
1.4 DE-STA-CO
Contents
Clamping Technology
Introduction 1.6
Holding capacity charts / Ordering no. index 16.1
Vertical hold-down clamps 2.1
Horizontal hold-down clamps 3.1
Straight-line action clamps 4.1
Variable stroke straight-line action clamps 5.1
Latch clamps 6.1
Plier clamps 7.1
Stainless steel clamps 8.1
Manual accessories 9.1
CARVER clamps 10.1

Standard pneumatic clamps 11.1
Pneumatic swing clamps 12.1
Pneumatic accessories 13.1
Automation power clamps 14.1

Hydraulic Clamping Technology
Actuators 15.23
Power sources 15.33
DE-STA-CO 1.5
Introduction
WORKHOLDING AND AUTOMATION
SOLUTIONS FOR EVERY
APPLICATION.
DE-STA-CO offers a comprehensive array of
workholding and automation components, as well
as customized special products and those designed
specifically for the automotive industry. Our diverse
lines of complementary products allow us to provide
ideal solutions to increase the efficiency and
profitability of your operations.
WORKHOLDING
AUTOMATION
DE-STA-CO has been the leader in workholding
DE-STA-CO produces an extensive array of
products since first inventing the toggle clamp in
modular automation components, including
1936. Since then, we have maintained the largest
grippers, end effectors, robotic tooling, slides and
selection of manual, hydraulic and pneumatic
linear and rotary actuators. Our broad selection
components on the market. Whatever the size or
of products is suited to handling anything from
scope of your application, DE-STA-CO offers the
tiny, delicate pieces to components too large to
perfect solution to your specific needs.
move manually. Additionally, our unique
DIRECTCONNECT™ technology allows for the
customization of an automation system, ensuring
OUR PRODUCTS ARE IDEAL FOR MOST INDUSTRIES
a perfect fit for your applications.
AND MANUFACTURING PROCESSES.
1.6 1.61.6 DE-STA-CO

DE-STA-CO
DE-STA-CO
Introduction
MORE THAN PRODUCTS.
COMPLETE SOLUTIONS.
EXTENSIVE CAD CAPABILITIES WWW.DESTACO.COM
Our global website is a constant
To ensure applicability to the broadest resource for our customers worldwide.
Designed to be a one-stop
possible base of manufacturers, DE-STA-CO
engineering resource center, our
supports a wide variety of CAD programs, website was developed by engineers
for engineers. Presented in multiple
ranging from Catia to Unigraphics. All CAD languages, www.destaco.com provides
detailed comprehensive product
formats are accessible through multiple information, data sheets and CAD
information twenty-four hours a day,
channels, including our cutting-edge online
seven days a week.
digital catalog, located at www.destaco.com.
This web-based 3D CAD library allows
engineers to configure individual 3D models
from DE-STA-CO’s extensive array of
workholding and automation products. The
intuitive system is part of DE-STA-CO’s
commitment to providing the exact CAD
information you need, whenever you need it. OUR GLOBAL WEBSITE
ALSO OFFERS:
• Access to • Expert
local sales application
representatives advice
and dealers • Training
• Sizing software information
• Customer • Downloadable
service access literature
TECHNICAL EXPERTISE, SERVICE AND SUPPORT

At DE-STA-CO, we maintain the highest possible standards of service
and support across all of our product offerings. Our employees possess
extensive engineering knowledge and receive comprehensive training
on all of our products. When you partner with DE-STA-CO, you work
with specialists that fully understand your operations, our products and
how the two work together to provide you with value. Our customer
service staff is available via a toll-free phone line, fax, email and our
company website, so that you can reach us through whatever medium
is most convenient.
DE-STA-CO
DE-STA-CO 1.71.7
Introduction What you should know about manual quick-action toggle clamps from DE-STA-CO
Your requirements
Workpieces need to be held in a specific position using a specific
amount of force in the shortest period of time. Once the workpiece
is clamped, the processing of it is usually carried out. This means
that the following tasks must be fulfilled using clamping products:
n Quick clamping
n Secure holding
n High clamping forces in a variety of space requirements
n Distortion-free clamping of the workpiece
n Good accessibility to the workpiece
These requirements are fulfilled successfully and reliably using

clamping products from DE-STA-CO.
Workpieces are clamped in nearly all applications of a

manufacturing environment. In the metalworking industry, reliable
clamping is a basic requirement for drilling, welding, bending,
grinding, testing, assembling, etc.
Additional applications that use DE-STA-CO clamping products:

n Automobile industry
n Electrical industry
n Woodworking industry
n Plastics industry
n Textile industry
n Chemical industry
n Food industry
We can also help you with any clamping tasks that may arise in
other applications not mentioned above.
Hydraulic Clamping Technology
1.8 DE-STA-CO
Introduction
What you should know about manual quick-action toggle clamps from DE-STA-CO
How Toggle Action Works
Toggle Action Principle
Toggle action clamps operate through a linkage system of levers and
pivots. The fixed-length levers, connected by pivot pins, supply the
action and clamping force. Toggle action has an over-center lock point
which is a fixed stop and linkage. Once in the over-center position, the
clamp cannot move or unlock unless the linkage is moved. All types of
toggle clamps have this same action, just oriented differently.
Unclamped
Toggle Action Force Factors
The maximum clamping or exerting force developed in any toggle
action clamp is attained when the three pivot points of the mechanism
are in a straight line. While this is theoretically true, it makes no
allowance for vibration and intermittent load conditions found in
industrial applications. Such conditions would soon unlock an Center position
improperly designed clamp. The proper amount of over-center travel to
produce maximum holding force and yet ensure positive locking is a
carefully calculated and controlled dimension developed by years of
experimentation and experience.
Throughout this catalog each clamp is rated with its “holding capacity.”
This is the maximum load or force the clamp will sustain in the closed Over-center, clamped position
and locked position without permanent deflection. Exerting forces
applied as the clamp closes are less than the holding capacity, and are
dependent on variables such as the position of the operator’s hand on the
handle; amount of force applied; and position of the spindle on the bar.
Toggle Action Clamps Compared With Cam Action Clamps
Cam action uses frictional force to effect a locking condition between can be manufactured from inexpensive materials, and are available in
the cam surface on the bar and the follower on the handle. Toggle stainless steel for outdoor or corrosive applications. If the material
action clamps have many advantages over cam action clamps, mainly being clamped has a variable thickness, however, a cam action clamp
because cam action clamps allow some movement while clamping. has the ability to better accommodate this application.
Toggle action clamps thus provide a more consistent clamping point,
www.destaco.com
Our homepage The CAD-Library

By visiting www.destaco.com on the Internet, you can obtain the n Please visit www.destaco.com to receive all of our free CAD files,
following information: including native files in .dwg, .dxf, .sat, .iges, .step formats
n Product overviews with custom searching options
n CAD downloads
n DE-STA-CO news and new products
n Trade show calendar
n Sales support in your immediate area
n Application examples
DE-STA-CO 1.9
Introduction Manual Clamping Technolog y DE-STA-CO: the “Original”
The details
The clever, safety link The standard handle

n Reduces pinch points during operation n Ergonomically shaped, for ease of operation
n One of the many safety features of n Oil-resistant, suitable for
DE-STA-CO clamps many different uses
n The “Red Handle” – the Original
The sturdy clamping bar

n Ensures high holding capacities due to high rigidity
n Lateral guide in the base
The long-lasting construction
n Heavy-duty rivet made of stainless steel
n Heavy-duty rivet is oiled during assembly
The bonded neoprene spindle
n Hardened knurled bushings
n Protects sensitive workpieces
n Long service life
n High degree of flexibility and
adaptation to the application
n Standard feature in all horizontal and
vertical models
What about the forces?

In the case of clamping products, a clear distinction must be made Holding Capacity
between exerting forces and holding capacities. Here are the The “holding capacity” of DE-STA-CO toggle clamps has been
essential features: determined by actual tests. It is defined as the maximum amount of
Exerting or Clamping Force force which may be applied to the work holding bar, in the closed
The “exerting force” of our air toggle clamps is well defined and can be position, without creating permanent deformation of the clamp
found on page 11.22. Manually operated clamps present a series of components. This maximum force is measured at a point closest to the
variables to determine actual exerting force. base and diminishes as the spindle approaches the end of the bar. The
ratings for holding capacity are maximum and should not be
These variables are: exceeded. These values include a safety factor.
(a) the force exerted on the handle by the operator;
(b) the point on the handle where this force is applied;
(c) the mechanical advantage in the linkage; and
Manual force
(d) the point on the work holding bar where the force will be
measured. As a general rule, the mechanical advantage available
throughout the line ranges from 2:1 to 10:1
Exerting force Holding capacity
1.10 DE-STA-CO
Introduction Manual Clamping Technolog y
How to find the most suitable clamp?
The following criteria will narrow the selection of the clamp type
n The type of fixture
n The required holding capacities
n The size conditions in and around the fixture
n Action required by clamp to perform required task
The most important models at a glance

Vertical hold-down clamp Straight line action clamp
n Handle is vertical in clamped position n Forward movement of the handle pushes the plunger into the
n Holding capacity 100 - 5,000 lbs. forward position
n Opening angle between 65° and 215° n Can be used as a push clamp and pull clamp, locking in two
positions
n Holding capacity 100 - 16,000 lbs.
Horizontal hold-down clamp Latch clamp

n Very low profile n Convenient one-hand operation due to the patented thumb
n Handle is horizontal in the clamped position control lever
n Holding capacity 60 - 1,000 lbs. n Compact models
n Opening angle between 90° and 105° n Holding capacity 200 - 7,500 lbs.
Plier clamps
n Flexible clamping and fixturing
n Also equipped with quick release lever
n Holding capacity 100 - 2,000 lbs.
DE-STA-CO 1.11
Introduction Manual Clamping Technolog y How to find the most suitable hold-down clamp?
In the case of the vertical and horizontal clamps, there are
variations in the clamping bars and clamp bases:
U-shaped clamp bar Solid clamp bar

n Allows for the adjustment of the spindle n Can be cut individually in various lengths and angles
in the horizontal position n Bolt retainer is used to attach the spindle
Flanged mounting base Straight mounting base

n For mounting on flat surfaces n For mounting on vertical surfaces or with a blade
1.12 DE-STA-CO
Introduction
Selecting The Proper DE-STA-CO Clamp
The information contained in this catalog is designed to help you select Red handle grips are provided on each model. Users should only locate
the right clamp to accomplish your job. DE-STA-CO distributor their hand in this area when operating the clamp, thus reducing the
personnel, as well as DE-STA-CO’s engineering department, are possibility of injury.
qualified and willing to offer assistance in special or unusual
applications. For most ordinary applications, however, consideration of
the following points will lead to the proper clamp selection: Safety Handle
This ergonomic handle provides
n Size and shape of the parts to be held. greater operator comfort.
n Uniformity of part size (Should you consider a spring-loaded
spindle to compensate for uneven parts?)
n Holding capacity required
n Strength and dexterity of the operator
n Operator’s position (Should you use horizontal or vertical
handle models?)
n Frequency of operation (Should you plan for a temporary or
permanent fixture?)
Safety Feature
n Time cycle of operation (Should you consider a turntable or
This safety link prevents accidental
conveyor set-up if curing time is required?) injury to an operator when opening
n Cycling time and sequence (Should you consider air-operated the clamp.
models that can be operated faster and in sequence?)
n Environment (Should you consider stainless steel, aluminum Clamp Series
or lightweight composite models?) 201, 202, 207,
210, 247, 267
Processing Applications
Remember, the same toggle action force multiplying principle can be
applied to other tasks besides holding. Certain DE-STA-CO models can
be used to position parts, power fixtures or perform mechanical
functions such as piercing sheet metal, staking rivets or locating.
OEM Applications Safety Distance
Exclusive handle design gives
DE-STA-CO clamps provide ready-made, compact devices for moving
more hand clearance between
or holding components. A little imagination will often show the product
bar and handle when clamp is
designer a way to obtain motion or locking force with no tooling costs in fully open position.
and often at less cost than custom designed components. Thousands
of DE-STA-CO clamps will be found installed as original equipment for Clamp Series
cleanout door latches, wheel locks, positioning devices, etc. 213, 217, 227, 237, 245
Safety
Our concern is not only the constant high quality of our products, but
also their fail-safe and foolproof handling. The knowledge gathered
since 1936 guarantees a developed, safe and high-quality clamping
unit.
A certain clamping force will be necessary to safely hold a part. This
force is determined by taking the following into account:
(a) the part material: such as, steel, wood, plastic or glass, etc.
Clamped
(b) the surface finish of the part: such as, polished, position
hard or soft, etc.
Open
(c) the machining or assembly operation: such as, Position
milling, welding, drilling, bonding, joining or sealing
a mold, etc.
In order to ensure clamp strength is not compromised, use all the Safety Catch
Handle or clamping arm on our DE-STA-CO®
mounting holes provided.
Toggle Lock Plus Clamps lock in the open
or closed position.
Clamp Series
207-LR, 207-UR, 210-SR, 210-UR
DE-STA-CO 1.13
Introduction Manual Clamping Technolog y Introduction
Specifications Power Clamps
Materials, finishes, treatments, etc. of DE-STA-CO products are changed Power clamps can be actuated by pneumatic pressure or hydraulic fluid.
from time-to-time to improve performance or reliability. These items are, Most of the cylinders are of tie-rod construction for maximum strength
naturally, subject to change without notice. In the interest of catalog and have hard chrome-plated or ground stainless steel piston rods. Rod
longevity they are not discussed in detail throughout the catalog pages. seals are generally a quad-seal. The small bore cylinders, through 1-1/8",
also have quad-seals for piston seals and the larger bores have U-cups.
As of the date of going to press, however, the following specifications
The standard cylinder is supplied with Buna N seals and may be operated
were in force and can be considered reasonably stable:
over a temperature range of -40° to +250° F. Also available is a high
Forgings temperature seal kit with Viton seals, which extends the temperature
Forged components (notably the squeeze action clamps) are made from range from -20° to +400° F. It also can be used in service with most of
C-1141 material and heat treated to RC 28-34 to improve resistance to the exotic fluids.
bending and create a wear surface for the pivot pins.
Miscellaneous
Castings The standard light and medium-duty clamps are made from C-1008 or
Used for bases on some of the larger clamps, castings are made of ductile C-1010 low carbon, cold-rolled steel. The work holding clamp bars and
iron, heat treated to properties of steel. They have the wear resistance of other components of our medium and heavy-duty clamps are made from
iron together with greater strength and excellent shock and impact C-1018, a cold finished, low carbon, case hardening steel.
resistance. The pivot pins in most of our clamp models are very close-tolerance,
cold-drawn, 430 stainless steel headed rivets. In the heavy-duty models,
Composite Materials
hardened and ground replaceable pins are used.
Clamp components and spindle assemblies are molded of Nylon 6/6 with
30% glass fiber reinforcement. Nylon is inert to most organic chemicals Bushings are made of low carbon steel, case hardened for wear and
such as esters, ketones, alcohols and hydrocarbons. It resists alkalis and serrated on the circumference to ensure non-rotating, long-wearing
salt solutions, but is attacked by phenols, formic acid, strong mineral bearing surface for the pivot pins.
acids and oxidizing agents. Maximum temperature is 170° F. Spindle assemblies are made from cold-drawn bar, Grade 2, and plated
with zinc. The bonded spindle tip is oil-resistant, black neoprene
Stainless Steel
with a durometer of 70-80 Shore A to provide adequate compressibility
Series 300 (normally an 18-8 type 302-304) giving increased resistance
and resiliency.
to chemical and acid attacks.
This is a heat-resisting steel, non-magnetic in the annealed state and Mounting The Clamp
slightly magnetic when cold worked. Used in the chemical, photographic, To properly secure the clamp to the mounting surface, all mounting holes
pharmaceutical, aircraft, dairy and food processing industries, marine provided must be used.
applications, and for surgical and dental equipment.
Modifications
NOTE: Rivets are 430 stainless steel. Contact the factory to determine if Making changes to our clamps may affect the performance of the
optional series 300 rivets are available. product. The life expectancy of a clamp is dependent upon many factors,
including alterations to the bar, handle or the addition of tooling. For any
Plating
modification, the maximum rated capacities should not be exceeded.
The plating on most steel toggle clamp parts is a zinc plating with a bright
finish, which conforms to government specification QQZ325C Type 1, Clamp Ratings
Class 3. Zinc plating typically has a useful service temperature of 250˚F Our clamps are rated using manual, hand power to actuate them. The use
(120˚C), but its corrosion inhibiting properties begin to degrade at 140˚F of cheater bars or hammers to impact the opening or closing of the clamp
(60˚C). Many cast and forged bases are black oxide finished. is expressly prohibited.
1.14 DE-STA-CO
Accessories
All the vertical and horizontal clamps are equipped with flanged The model number addition “-LS” also allows you to order the clamp
washers/bolt retainers and bonded neoprene spindles (large models without any spindle accessories. In this case, only flanged washers
have hex head spindles). Models with heavy-duty clamping bars are are supplied.
equipped with a bolt retainer and are supplied without a spindle.
e.g. Model 207-U e.g. Model 207-U-LS
With our wide variety of accessories, you can customize the

functionality of the clamp to suit your specific requirements.
Available accessories include:
Adjustment Spindles
n With bonded neoprene pads Bolt retainers
n With swivel foot n For attachment of the adjustment spindles to solid, heavy-duty
n With hex head clamping bars
n With pressurematic spring loaded variability
Crossarm sets
Neoprene Caps n Bridge for assembly of 2 adjustment spindles for multiple
n Hex head adjustment spindles slip on for easy replacement position clamping
n For protection of the workpiece
Flanged washers
n For attachment of the adjustment spindles to U-shaped
clamping bars
DE-STA-CO 1.15
Introduction Manual Clamping Technolog y Model number code
The model number code is used to distinguish between
the following features:
n Size
n Model
n Constructional features
2 07-U-LS
Accessories option
LS = less spindle (without pressure spindle)
Model/feature
U = U-shaped clamp bar
S = Solid clamp bar
B = Straight mounting base
R = Base flanged to the right
F = Front mounting base attachment
R = Release lever (additional safety lock)
SS = Stainless steel version
L = Base flanged to the left
L = Model with extra-long bars
SQ = Square plunger
T = “T” handle
M = Metric plunger
Design size
Model type/series
2 = Vertical hold-down clamp
2 = Horizontal hold-down clamp
3 = Compact hold-down clamp
3 = Latch clamp
4 = Plier clamp
5 = Modular or heavy-duty vertical and horizontal clamp
6 = Straight line action clamp
1.16 DE-STA-CO
Vertical Clamps
New products
NEW
The new 2000-Series: Strong and Compact
This revolutionary new DE-STA-CO toggle clamp series features high holding forces and a compact design,
greater clearance, pinch point elimination, vertical movement of the spindle, no workpiece movement, open,
long clamping arm for more flexibility and optimized stop point location for more durability.
page 2.12
DE-STA-CO Subject to technical modifications without notice 2.1

Vertical Clamps Product group – vertical clamps
Application areas
Clamping during the assembling, drilling, testing, gluing, locking of
covers and much more. The vertical clamp is the most frequently used
product whenever clamping products are to be integrated with a
manual fixture.
The essential product features
In the clamping position, the handle is vertical
Vertical clamps open at an angle between 90° and 215°
Vertical clamps are offered with U-shaped or heavy-duty solid
clamping bars
Vertical clamps have a straight or flanged base. The heavy-duty
vertical clamps possess a base that can be welded on without
a hole pattern
Model 210-U clamping a frame
2.2 Subject to technical modifications without notice DE-STA-CO

Vertical Clamps
Product group – vertical clamps
Holding Capacity Holding Capacity
Model no. max. [lbs.] Category Page Model no. max. [lbs.] Category Page
2002-S 600 NEW! Standard 2.7 202 200 Standard 2.12
2007-S 1,000 NEW! Standard 207-L 500 Standard
2010-S 1,400 NEW! Standard 207-S 500 Standard
210-S 750 Standard
247-S 1,000 Standard
267-S 1,200 Standard
2002-SB 600 NEW! Standard 2.7 202-B 200 Standard 2.13

2007-SB 1,000 NEW! Standard 207-LB 500 Standard
2010-SB 1,400 NEW! Standard 207-SB 500 Standard
210-SB 750 Standard
247-SB 1,000 Standard
2002-SBR 600 NEW! DE-STA-CO® 2.8 207-LR 500 DE-STA-CO® 2.14

2007-SBR 1,000 Toggle Lock Plus 210-SR 750 Toggle Lock Plus
2010-SBR 1,400 NEW! DE-STA-CO® DE-STA-CO®
Toggle Lock Plus Toggle Lock Plus
NEW! DE-STA-CO DE-STA-CO®
2002-SR 600 NEW! DE-STA-CO® 2.8 207-LBR 500 DE-STA-CO® 2.15

2007-SR 1,000 Toggle Lock Plus 210-SBR 750 Toggle Lock Plus
2010-SR 1,400 NEW! DE-STA-CO® DE-STA-CO®
NEW! DE-STA-CO®
Toggle Lock Plus
2002-U 600 NEW! Standard 2.9 202-T 200 Standard 2.16

2007-U 1,000 NEW! Standard 207-TS 500 Standard
2010-U 1,400 NEW! Standard 210-TS 750 Standard
2002-UB 600 NEW! Standard 2.9 202-TB 200 Standard 2.16

2007-UB 1,000 NEW! Standard
2010-UB 1,400 NEW! Standard
2002-UBR 600 NEW! DE-STA-CO® 2.10 201-TU 100 Standard 2.17

2007-UBR 1,000 Toggle Lock Plus 202-TU 200 Standard
2010-UBR 1,400 NEW! DE-STA-CO® 207-TU 375 Standard
Toggle Lock Plus 207-TUL 375 Standard
NEW! DE-STA-CO® 210-TU 600 Standard
Toggle Lock Plus
2002-UR 600 NEW! DE-STA-CO® 2.11 201-U 100 Standard 2.18

2007-UR 1,000 Toggle Lock Plus 202-U 200 Standard
202-UL 375 Standard
2010-UR 1,400 NEW! DE-STA-CO® 207-U 375 Standard
Toggle Lock Plus 207-UL 375 Standard
NEW! DE-STA-CO® 207-UO 375 Standard
210-U 600 Standard
Toggle Lock Plus 247-U 1,000 Standard
267-U 1,200 Standard

Vertical Clamps Product group – vertical clamps
201-UB 100 Standard 2.20 558 2,500 Heavy-duty 2.29
202-UB 200 Standard 568 3,300 Heavy-duty
207-UB 375 Standard
207-ULB 375 Standard
210-UB 600 Standard
247-UB 1,000 Standard
267-UB 1,200 Standard
207-UR 375 DE-STA-CO® 2.22 533-L 1,500 NEW! Heavy-duty 2.30

210-UR 600 Toggle Lock Plus 535-L 2,200 NEW! Heavy-duty
DE-STA-CO®
Toggle Lock Plus
207-UBR 375 DE-STA-CO® 2.23 533-LB 1,500 NEW! Heavy-duty 2.31

210-UBR 600 Toggle Lock Plus 535-LB 2,200 NEW! Heavy-duty
DE-STA-CO® 536-LB 2,900 NEW! Heavy-duty
Toggle Lock Plus
219 350 Standard 2.24 501-B 560 Modular 2.33

229 1,000 Standard 503-MB 1,500 Modular
503-MBLSC 1,500 Modular
505-MB 2,400 Modular
506-MB 5,000 Modular
516 750 Standard 2.25 501-LB 560 Modular 2.34

516-B 750 Standard 503-MLB 1,500 Modular
503-MLBLSC 1,500 Modular
505-MLB 2,400 Modular
506-MLB 5,000 Modular
518 500 Standard 2.26 7-101 475 Cam Action 2.36

7-58 600 Cam Action
7-59 1,000 Cam Action
528 1,000 Heavy-duty 2.27 207-SF 500 NEW! Standard 2.37

528-F 1,000 Heavy-duty
548 2,000 Heavy-duty 2.28 207-UF 375 NEW! Standard 2.38

578 4,000 Heavy-duty
588 6,200 Heavy-duty

Product group – vertical clamps
Vertical Clamps
Holding Capacity
Model no. max. [lbs.] Category Page
317-S 375 Standard 2.39
317-U 375 Standard 2.40
527 1,000 Standard 2.41
527-F 1,000 Standard 2.42
557 2,500 Standard 2.42
91090 385 Standard 2.43

91140 1,000
VH3 200 Composite 2.43

Vertical Clamps 2000-Series, vertical clamps
NEW
Strength: 2-3 times higher Holding Capacity

High holding capacity, compact design Ergonomics: extended
handle length
Compact: vertical
spindle contact on
Redesigned handle can accommodate
workpiece to
DE-STA-CO® Toggle Lock Plus
minimize part
techonology for added safety
movement
Durability: hardened, torsion

Safety: knob resistant bushings deliver
on arm extended life
Safety: greater hand clearance in

the open position for improved
safety, elimination of pinch points,
better ergonomics
Flexibility: additional mounting holes in the base
to match legacy products for easy swapping.
Main Benefits: Product features:

1. High holding capacity, compact design All pivot points are bushed yielding high lifecycles
2. Greater hand clearance, pinch point elimination Rivets made of stainless steel to reduce wear
3. Vertical movement of the spindle, no workpiece movement Improved material thickness for high durability
4. Open, long clamping bar for more flexibility Ergonomically shaped handle for operator comfort
5. Optimized handle stop location for more durability
Application areas:
Ideal for fixtures and applications with restricted space where
high holding capacity is required.
t No.
Paten ,507
6,595

Vertical Clamps
Models 2002-S, 2007-S, 2010-S
NEW
Holding
Capacity Bar
Opening Opening Handle Spindle Size
Model no. [lbs.] +10º Moves [lbs.] Bolt Retainer (Not Supplied)
2002-S 600 75° 85º 0.48 2002115-E 1/4 or M6
2007-S 1,000 80° 76º 1.20 2007115-E 5/16 or M8
2010-S 1,400 80° 83º 2.56 2010115-E 3/8 or M10
See additional adjustment spindles beginning on page 9.1
Solid clamping bar with bolt retainer

Flanged base
t No.
Paten ,507
6,595
Model no. A A1 A2 A3 B B1 C C1 C2 ØD ØD1 F1 H L L1
2002-S 0.50 1.36 0.90 0.24 1.06 1.52 0.95 0.49 0.12 0.22 0.22 0.25 5.47 3.29 1.93
2007-S 0.75 1.93 1.25 0.33 1.25 1.94 1.25 1.24 0.16 0.28 0.28 0.34 7.64 4.81 2.88
2010-S – 2.53 1.25 0.63 1.78 2.62 1.70 1.12 0.20 0.34 0.34 0.44 9.61 6.09 3.56
NEW Models 2002-SB, 2007-SB, 2010-SB

Holding
Capacity Bar
Opening Handle Spindle Size
Opening Model no. [lbs.] +10º Moves [lbs.] Bolt Retainer (Not Supplied)
2002-SB 600 75° 85º 0.48 2002115-E 1/4 or M6
2007-SB 1,000 80° 76º 1.20 2007115-E 5/16 or M8
2010-SB 1,400 80° 83º 2.56 2010115-E 3/8 or M10
Solid clamping bar with bolt retainer

Straight base
t No.
Paten ,507
6,5 9 5
Model no. A A1 A2 A3 B2 C C1 C2 ØD ØD1 F1 H L L1

2002-SB 0.50 1.36 0.90 0.24 0.24 1.27 0.49 0.12 0.22 0.22 0.25 5.47 3.29 1.93
2007-SB 0.75 1.93 1.25 0.33 0.24 1.68 1.24 0.16 0.28 0.28 0.34 7.64 4.81 2.88
2010-SB – 2.53 1.25 0.63 0.31 2.20 1.12 0.20 0.34 0.34 0.44 9.61 6.09 3.56

Vertical Clamps
Models 2002-SBR, 2007-SBR, 2010-SBR NEW
Holding
Capacity Bar
Opening Handle Spindle Size Opening
2002-SBR 600 75° 85º 0.48 2002115-E 1/4 or M6
2007-SBR 1,000 80° 76º 1.20 2007115-E 5/16 or M8
2010-SBR 1,400 80° 83º 2.56 2010115-E 3/8 or M10
See additional adjustment spindles beginning on page 9.1.

Solid bar with bolt retainer
Straight base
t No.
Paten ,507
6,595
Model no. A A1 A2 A3 B2 C C1 C2 ØD ØD1 F1 H L L1

2002-SBR 0.50 1.36 0.90 0.24 0.24 1.27 0.49 0.12 0.22 0.22 0.25 5.47 4.17 1.93
2007-SBR 0.75 1.93 1.25 0.33 0.24 1.68 1.24 0.16 0.28 0.28 0.34 7.64 5.94 2.88
2010-SBR – 2.53 1.25 0.63 0.31 2.20 1.12 0.20 0.34 0.34 0.44 9.61 7.28 3.56
Models 2002-SR, 2007-SR, 2010-SR NEW

Holding
Capacity Bar
Opening Handle Spindle Size Opening
2002-SR 600 75° 85º 0.48 2002115-E 1/4 or M6
2007-SR 1,000 80° 76º 1.20 2007115-E 5/16 or M8
2010-SR 1,400 80° 83º 2.56 2010115-E 3/8 or M10

Solid bar with bolt retainer
Flanged base
t No.
Paten ,507
6,59 5
Model no. A A1 A2 A3 B B1 C C1 C2 ØD ØD1 F1 H L L1

2002-SR 0.50 1.36 0.90 0.24 1.06 1.52 0.95 0.49 0.12 0.22 0.26 0.25 4.73 4.17 1.93
2007-SR 0.75 1.93 1.25 0.33 1.25 1.94 1.25 1.24 0.16 0.28 0.33 0.34 7.21 5.94 2.88
2010-SR – 2.53 1.25 0.63 1.78 2.62 1.70 1.12 0.20 0.34 0.45 0.44 9.00 7.28 3.56

Vertical Clamps
Models 2002-U, 2007-U, 2010-U
NEW
Holding
Capacity Bar
Opening Handle Flanged
Model no. [lbs.] +10º Moves [lbs.] Standard equipment Washers
Opening
Öffnungs-
2002-U 60 75° 85° 0.48 215208-M 215105
2002-U-LS without spindle 215105
H
M
2007-U 1,000 80° 76° 1.20 2007208-M 507107
C1
2010-U 1,400 80° 83° 2.56 240208-M 235106

C

L1
C2

L
U-bar
Flanged base
B1
B
F
A3 A øD t No.
Paten ,507
A2 6,59 5
A1
Model no. A A1 A2 A3 B B1 C C1 C2 ØD F H L L1 M
2002-U 0.50 1.36 0.90 0.24 1.06 1.52 0.95 0.49 0.12 0.22 0.25 4.73 3.29 1.93 M6
2007-U 0.75 1.93 1.25 0.33 1.25 1.94 1.25 1.24 0.16 0.28 0.34 7.21 4.81 2.88 M8
2010-U – 2.53 1.25 0.63 1.78 2.62 1.70 1.12 0.20 0.34 0.44 9.00 6.09 3.56 M10
Models 2002-UB, 2007-UB, 2010-UB

NEW
Holding
Capacity Bar
Opening
2002-UB 600 75° 85° 0.48 215208-M 215105
2002-UB-LS without spindle 215105
2007-UB 1,000 80° 76° 1.20 2007208-M 507107
2010-UB 1,400 80° 83° 2.56 240208-M 235106
U-bar
Straight base
t No.
Paten ,507
6,59 5
Model no. A A1 A2 A3 B2 C C1 C2 ØD F H L L1 M
2002-UB 0.50 1.36 0.90 0.24 0.24 1.27 0.49 0.12 0.22 0.25 5.07 3.29 1.93 M6
2007-UB 0.75 1.93 1.25 0.33 0.24 1.68 1.24 0.16 0.28 0.34 7.64 4.81 2.88 M8
2010-UB – 2.53 1.25 0.63 0.31 2.20 1.12 0.20 0.34 0.44 9.61 6.09 3.56 M10

Vertical Clamps
Models 2002-UBR, 2007-UBR, 2010-UBR NEW
Holding
Capacity Bar
Model no. [lbs.] +10º Moves [lbs.] Standard equipment Washers Opening
2002-UBR 600 75° 85º 0.48 215208-M 215105

2002-UBR-LS without spindle 215105
2007-UBR 1,000 80° 76º 1.20 2007208-M 507107
2010-UBR 1,400 80° 83º 2.56 240208-M 235106

U-bar
Straight base
t No.
Paten ,507
6,59 5
Model no. A A1 A2 A3 B2 C C1 C2 ØD F H L L1 M
2002-UBR 0.50 1.36 0.90 0.24 0.24 1.27 0.49 0.12 0.22 0.25 5.07 4.17 1.93 M6
2007-UBR 0.75 1.93 1.25 0.33 0.24 1.68 1.24 0.16 0.28 0.34 7.64 5.94 2.88 M8
2010-UBR – 2.53 1.25 0.63 0.31 2.20 1.12 0.20 0.34 0.44 9.61 7.28 3.56 M10

Vertical Clamps
Models 2002-UR, 2007-UR, 2010-UR
NEW
Holding
Capacity Bar
Opening
2002-UR 600 75° 85º 0.48 215208-M 215105

2002-UR-LS without spindle 215105
2007-UR 1,000 80° 76º 1.20 2007208-M 507107
2010-UR 1,400 80° 83º 2.56 240208-M 235106
See additional adjustment spindles beginning on page 9.1 forward

U-bar
Flanged base
t No.
Paten ,507
6,59 5
Model no. A A1 A2 A3 B B1 C C1 C2 ØD F H L L1 M
2002-UR 0.50 1.36 0.90 0.24 1.06 1.52 0.95 0.49 0.12 0.22 0.25 4.73 4.17 1.93 M6
2007-UR 0.75 1.93 1.25 0.33 1.25 1.94 1.25 1.24 0.16 0.28 0.34 7.21 5.94 2.88 M8
2010-UR - 2.53 1.25 0.63 1.78 2.62 1.70 1.12 0.20 0.34 0.44 9.00 7.28 3.56 M10

Vertical Clamps Standard vertical clamps – flanged or straight base, solid bar
Solid clamp bar Product features
Base flanged or straight Torsion-protected, hardened bushings
Application areas Rivets made of stainless steel
Ideal for all sectors in which work is performed with holding capacities Zinc plated
of up to 1,200 lbs. The heavy-duty clamping bar is highly suitable for Oil-resistant, ergonomically shaped DE-STA-CO
adaptation to fixtures where it can be individually cut in lengths at a handle grip
specific angle. Intermediate safety link
Applications include assembling, drilling, testing, gluing and other Accessories

processing operations. Suitable for use in welding fixtures and gauge Vertical clamps with solid bars are delivered with bolt retainers
manufacturing, as well as in all sectors of the woodworking industry. that can be welded to the clamping bar.
Models 202, 207-L, 207-S, 210-S, 247-S, 267-S,

Holding
Capacity Bar D
Opening Handle Bolt

Model no. [lbs.] +10º Moves [lbs.] Standard equipment Retainer B B1
202 200 104° 64° 0.33 202208-M – F1

A3
A
207-L 500 115° 62° 0.74 without spindle 207105
207-S 500 115° 62° 0.69 without spindle 207105
210-S 750 106° 58° 1.29 without spindle 210114
Opening
247-S 1,000 136° 75° 2.39 without spindle 247110
267-S 1,200 140° 70° 4.36 without spindle 110122
H
C1
ALSO AVAILABLE
C2
As Air Hydraulic Model 807-S Page 11.8
C
Model 810-S Page 11.8 A1

Model 847-S Page 11.8 L1
As DE-STA-CO® Model 207-LR Page 2.22 L
Toggle Lock Plus Model 210-SR Page 2.22

See accessories beginning on page 9.1.
See section 16 for holding capacity charts.
Model no. A A1 A3 A6 B B1 C C1 C2 ØD ØD1 F1 H L L1 Spindle Size

202 0.50 1.00 0.25 – 1.06 1.56 0.94 0.37 0.12 0.22 0.39 0.24 4.21 2.31 1.31 M6 or 1/4
207-L 0.75 1.38 0.31 0.15 1.25 1.75 1.25 0.63 0.12 0.28 0.32 0.24 6.89 5.02 3.45 M8 or 5/16
207-S 0.75 1.38 0.31 0.15 1.25 1.75 1.25 0.63 0.12 0.28 0.32 0.24 6.89 3.75 2.19 M8 or 5/16
210-S 1.25 1.91 0.31 0.42 1.78 2.53 1.67 0.79 0.12 0.33 0.53 0.31 8.15 5.53 3.63 M12 or 1/2
247-S 1.25 2.00 0.37 0.47 1.78 2.53 2.00 0.87 0.19 0.34 0.57 0.38 8.69 6.87 4.87 M12 or 1/2
267-S 2.00 3.00 0.49 – 2.75 3.75 3.08 1.26 0.19 0.48 0.65 0.37 11.88 8.88 5.88 M14 or 5/8

Vertical Clamps
Models 202-B, 207-LB, 207-SB, 210-SB, 247-SB
Holding
Capacity Bar
Opening Opening Handle Bolt
Model no. [lbs.] +10º Moves [lbs.] Standard equipment Retainer
202-B 200 104° 64° 0.33 202208-M –
207-LB 500 115° 62° 0.74 without spindle 207105
C1
H
207-SB 500 115° 62° 0.69 without spindle 207105
210-SB 750 106° 58° 1.29 without spindle 210114
C
247-SB 1,000 136° 75° 2.39 without spindle 247110

C3
D
C2
A3
B2 ALSO AVAILABLE
A
A1 As Stainless Steel Model 202-BSS Page 8.4

L1 ®
As DE-STA-CO Model 207-LBR Page 2.23
Toggle Lock Plus Model 210-SBR Page 2.23
F1
Model no. A A1 A3 A6 B2 C C1 C2 C3 ØD ØD1 F1 H L L1 Spindle Size

202-B 0.50 1.00 0.25 – 0.25 1.13 0.37 0.12 0.24 0.22 0.39 0.24 4.40 2.31 1.31 M6 or 1/4
207-LB 0.75 1.38 0.31 0.15 0.25 1.55 0.63 0.12 0.25 0.28 0.32 0.24 7.48 5.02 3.45 M8 or 5/16
207-SB 0.75 1.38 0.31 0.15 0.25 1.55 0.63 0.12 0.25 0.28 0.32 0.24 7.48 3.75 2.19 M8 or 5/16
210-SB 1.25 1.91 0.31 0.47 0.31 2.19 0.79 0.12 0.39 0.33 0.53 0.31 8.16 5.53 3.63 M12 or 1/2
247-SB 1.25 2.00 0.37 – 0.38 2.25 0.87 0.19 0.37 0.34 0.57 0.38 8.94 6.87 4.87 M12 or 1/2
Available upon request, as are a number of other modifications

Vertical Clamps Vertical clamps with DE-STA-CO Toggle Lock Plus ®
Solid clamp bar Zinc plated

Base flanged or straight Oil-resistant, ergonomically shaped DE-STA-CO
Application areas handle grip
The additional release lever holds the clamp in the opened and closed Intermediate safety link
position. Unintentional opening and closing of the clamp is therefore Accessories
impossible. Vertical clamps with solid clamp bars are only delivered with
This clamp is preferred for more difficult clamping conditions, e.g. bolt retainers that can be welded to the clamping bar.
vibrating conditions, transporting of sensitive parts and where the clamp Safety instructions
arm is set at an angle to the base. To guarantee secure locking, the clamp must be adjusted to lock in
the over-center position.
Product features
Additional locking device for secure clamping
Torsion-protected, hardened bushings
Rivets made of stainless steel
Models 207-LR, 210-SR

Holding
Capacity Bar
Opening Handle Bolt
207-LR 500 100° 62º 1.00 without spindle 207105
H
Opening
210-SR 750 103° 58º 1.60 without spindle 210114

C1
C2
C

A6
B1
B
øD1
F1
ØD
A3
A
L1 A1
Model no. A A1 A3 A6 B B1 C C1 C2 ØD ØD1 F1 H L L1 Spindle Size

207-LR 0.75 1.38 0.31 0.15 1.25 1.70 1.25 0.63 0.12 0.28 0.32 0.24 6.90 4.58 3.45 M8 or 5/16
210-SR 1.25 1.89 0.31 0.42 1.75 2.50 1.68 0.79 0.12 0.33 0.53 0.31 8.15 6.61 3.56 M12 or 1/2

Vertical Clamps
Models 207-LBR, 210-SBR
Holding
Capacity Bar
Opening Handle Bolt
207-LBR 500 100° 62º 1.00 without spindle 207105
Opening
210-SBR 750 103° 58º 1.60 without spindle 210114
C1

C

øD
C3
A3
A
A6 A1
L1
H
C2
B2
F1
øD1
Model no. A A1 A3 A6 B2 C C1 C2 C3 ØD ØD1 F1 H L L1 Spindle Size

207-LBR 0.75 1.38 0.31 0.15 0.24 1.56 0.63 0.12 0.25 0.28 0.32 0.24 7.44 4.58 3.45 M8 or 5/16
210-SBR 1.25 1.89 0.31 0.42 0.31 2.20 0.79 0.12 0.39 0.33 0.53 0.31 9.04 6.61 3.56 M12 or 1/2

Vertical Clamps
Models 202-T, 207-TS, 210-TS
Holding
Capacity Bar
Opening Handle Bolt
202-T 200 104° 64° 0.36 202208-M – C1
H
207-TS 500 115° 62° 0.74 without spindle 207105

210-TS 750 106° 58° 1.36 without spindle 235106
C

A6
C2
A1
Solid clamping bar

T-handle has shorter profile and can be
F1
operated from right or left hand side

N D1 B B1
Flanged base
A3
D
L1
A
L
Model no. A A1 A3 A6 B B1 C C1 C2 ØD F H L L1 L2 L3 N Spindle Size

202-T 0.50 1.00 0.26 – 1.06 1.56 0.94 0.38 0.12 0.22 0.25 2.81 2.73 1.73 0.51 0.98 3.56 M6 or 1/4
207-TS 0.75 1.38 0.31 0.15 1.25 1.75 1.25 0.63 0.11 0.28 0.33 4.36 3.75 2.15 0.50 1.30 3.00 M8 or 5/16
210-TS 1.25 1.91 0.31 0.42 1.78 2.53 1.67 0.79 0.11 0.33 0.40 5.38 5.53 3.63 0.94 2.40 6.02 M12 or 1/2
Available upon request
Model 202-TB
Holding
Capacity Bar
Opening Handle Bolt
C1
202-TB 200 104° 64° 0.36 202208-M 215105
H
See additional adjustment spindles beginning on page 9.1 C

D
See section 16 for holding capacity charts. A6 C2

A3 B2
C3
A
Solid clamping bar L1 A1
T-handle
Straight base
D1 F1
Model 202-TB
Model no. A A1 A3 A6 B2 C C1 C2 C3 ØD F H L L1 L2 L3 Spindle Size N
202-TB 0.50 1.00 0.26 – 0.25 1.13 0.38 0.12 0.12 0.22 0.25 3.00 2.73 1.73 0.51 0.98 M6 or 1/4 3.56

Vertical Clamps
Models 201-TU, 202-TU, 207-TU, 207-TUL, 210-TU
Holding
L
Capacity Bar
201-TU 100 110° 60° 0.17 305208-M 102111
C1
H
202-TU 200 104° 64° 0.38 202208-M 215105

207-TU 375 115° 62° 0.72 without spindle 507107
C
207-TUL 375 115° 62° 0.72 without spindle 501107

A6
C2
L1 A1 210-TU 600 106° 58° 1.36 without spindle 235106
L2
F
M B B1 N
L3 U-bar
A3 D
A
T-handle
Flanged base
Model no. A A1 A3 A6 B B1 C C1 C2 ØD F H L L1 L2 L3 M N
201-TU 0.63 1.00 0.19 – 0.94 1.31 0.63 0.31 0.08 0.17 0.21 2.25 2.02 1.02 0.13 0.73 M5 or 10-32 1.92
202-TU 0.50 1.00 0.26 – 1.06 1.56 0.94 0.38 0.12 0.22 0.25 2.81 2.73 1.73 0.51 0.98 M6 or 1/4 3.56
207-TU 0.75 1.38 0.31 0.15 1.25 1.75 1.25 0.63 0.11 0.28 0.33 4.36 3.75 2.15 0.50 1.30 M8 or 5/16 3.00
207-TUL 0.75 1.38 0.31 0.15 1.25 1.75 1.25 0.63 0.11 0.28 0.33 4.36 5.41 3.85 0.50 2.75 M8 or 5/16 3.00
210-TU 1.25 1.91 0.31 0.42 1.78 2.53 1.67 0.79 0.11 0.33 0.40 5.38 5.53 3.63 0.94 2.40 M10 or 3/8 6.02

Vertical Clamps Standard vertical clamps
U-shaped clamping bar Zinc plated
Flanged base Oil-resistant, ergonomically shaped DE-STA-CO handle grip
Intermediate safety link
Application areas
Ideal for all areas in which work is performed with holding capacities Accessories
of up to 1,200 lbs. For example, assembling, drilling, testing, gluing Vertical clamps with a U-shaped clamping bar can be ordered in
and other processing operations. Suitable for use in welding fixtures two varieties:
and in checking fixtures, as well as in all sectors of the woodworking Standard model number: The matching standard adjustment
industry. spindle is included.
Model number contains the addition “-LS”: The model is delivered
Product features
with two flange washers without an adjustment spindle.
Torsion-protected, hardened bushings in models with a holding
capacity greater than 375 lbs.
Models 201-U, 202-U, 202-UL, 207-U, 207-UL,

207-UO, 210-U, 247-U, 267-U,
Holding ALSO AVAILABLE

Capacity Bar As Air Hydraulic Model 807-U Page 11.7
Opening Handle Flanged Model 810-U Page 11.7
Model no. [lbs.] +10º Moves [lbs.] Standard equipment Washers Model 812-U Page 11.7
201-U 100 110° 60° 0.15 305208-M 102111 Model 847-U Page 11.7
As Stainless Steel Model 201-USS Page 8.3
Model 202-USS Page 8.3
202-U 200 104° 64° 0.35 202208-M 215105 Model 207-USS Page 8.3
202-U-LS without spindle 215105 Model 210-USS Page 8.3
202-UL 200 104º 64° 0.36 202208-M 215105 As DE-STA-CO® Model 207-UR Page 2.30
Toggle Lock Plus Model 210-UR Page 2.30
207-U 375 100° 62° 0.67 225208-M 507107
207-U-LS without spindle 507107 See accessories beginning on page 9.1.
207-UL 375 100° 62° 0.67 225208-M 507107 See section 16 for holding capacity charts.
207-UO 375 100° 62° 0.67 without spindle 507107

210-U 600 106° 58° 1.29 240208-M 235106
247-U 1,000 136° 75° 2.36 247208-M 247109
267-U 1,200 140° 70° 4.80 267203-M 267102

Vertical Clamps
Cont’d Models 201-U, 202-U, 202-UL, 207-U, 207-UL,
207-UO, 210-U, 247-U, 267-U,
Opening
H
C1
C2
C
A1
A6
M
B1
B
F
L2
L3 øD
A3
A
L1
L
Several Model 201-U clamps, with hex-head spindles, are used to secure
a guide in a bottle capping application.
Model no. A A1 A3 A6 B B1 C C1 C2 ØD F H L L1 L2 L3 M
201-U 0.63 1.00 0.19 – 0.94 1.31 0.63 0.31 0.08 0.17 0.21 3.03 2.02 1.02 0.13 0.73 M5 or 10-32
202-U 0.50 1.00 0.26 – 1.06 1.56 0.94 0.38 0.12 0.22 0.25 4.21 2.73 1.73 0.51 0.98 M6 or 1/4
202-UL 0.50 1.00 0.26 – 1.06 1.56 0.94 0.38 0.12 0.22 0.25 4.21 3.27 2.27 0.51 1.54 M6 or 1/4
207-U 0.75 1.38 0.31 0.15 1.25 1.75 1.25 0.63 0.11 0.28 0.33 6.89 3.68 2.15 0.50 1.30 M8 or 5/16
207-UL 0.75 1.38 0.31 0.15 1.25 1.75 1.25 0.63 0.11 0.28 0.33 6.89 5.41 3.85 0.50 2.75 M8 or 5/16
207-UO 0.75 1.38 0.31 0.15 1.25 1.75 1.25 0.63 0.11 0.28 0.33 5.63 3.75 2.15 0.50 1.30 M8 or 5/16
210-U 1.25 1.91 0.31 0.42 1.78 2.53 1.67 0.79 0.11 0.33 0.40 8.15 5.54 3.63 0.94 2.40 M10 or 3/8
247-U 1.25 2.00 0.37 0.47 1.78 2.53 2.00 0.83 0.19 0.34 0.53 8.69 6.87 4.87 1.36 3.06 M12 or 1/2
267-U 2.00 3.00 0.49 – 2.75 3.75 3.08 1.26 0.19 0.48 0.65 11.88 8.92 5.92 1.44 4.00 M16 or 5/8

Vertical Clamps Standard vertical clamps
U-shaped clamping bar Zinc plated
Straight base Oil-resistant, ergonomically shaped DE-STA-CO
Application areas handle grip
Ideal for all sectors in which work is performed with holding Intermediate safety link
capacities of up to 1,200 lbs., including assembling, drilling, testing, Accessories
gluing and other processing operations. Suitable for use in welding Vertical clamps with a U-shaped clamping bar can be ordered in two
fixtures and in checking fixtures, as well as in all sectors of the varieties:
woodworking industry. Standard model number: The matching standard adjustment
Product features spindle is included.
Torsion-protected, hardened bushings in models with a holding Model number contains the addition “-LS”: The model is delivered with
force greater than 375 lbs. two flange washers without an adjustment spindle.
Models 201-UB, 202-UB, 207-UB,

207-ULB, 210-UB, 247-UB,
Holding ALSO AVAILABLE

Capacity Bar As Stainless Steel Model 202-UBSS Page 8.5
Opening Handle Flanged ®
As DE-STA-CO Model 207-UBR Page 2.31
Toggle Lock Plus Model 210-UBR Page 2.31
201-UB 100 110° 60° 0.15 305208-M 102111
202-UB 200 104° 64° 0.35 202208-M 215105
207-UB 375 100° 62° 0.67 225208-M 507107
207-ULB 375 100° 62° 0.67 240208-M 507107
210-UB 600 106° 58° 1.29 247208-M 235106
247-UB 1,000 136° 75° 2.36 247208-M 247109

Vertical Clamps
Cont’d Models 201-UB, 202-UB, 207-UB,
207-ULB, 210-UB, 247-UB,
Opening
H
C1
C
øD
C3
A3
A
C2
A6 A1
B2
L2
L1
M Model 207-UO hold-down clamps used in fixturing material

in a silk screening application.
F
L3
L
Model no. A A1 A3 A6 B2 C C1 C2 C3 ØD F H L L1 L2 L3 M
201-UB 0.63 1.00 0.19 – 0.16 0.88 0.31 0.08 0.08 0.17 0.21 3.13 2.02 1.02 0.13 0.73 M5
202-UB 0.50 1.00 0.26 – 0.24 1.13 0.38 0.12 0.12 0.22 0.25 4.40 2.73 1.73 0.51 0.98 M6
207-UB 0.75 1.38 0.31 0.15 0.25 1.55 0.63 0.11 0.11 0.28 0.33 7.48 3.68 2.15 0.50 1.30 M8
207-ULB 0.75 1.38 0.31 0.15 0.25 1.55 0.63 0.11 0.11 0.28 0.33 7.48 5.41 3.85 0.50 2.75 M8
210-UB 1.25 1.91 0.31 0.42 0.31 2.19 0.79 0.11 0.11 0.33 0.40 8.16 5.54 3.63 0.94 2.40 M10
247-UB 1.25 2.00 0.37 0.47 0.38 2.25 0.83 0.19 0.19 0.34 0.53 8.94 6.87 4.87 1.36 3.06 M12

Vertical Clamps Vertical clamps with DE-STA-CO® Toggle Lock Plus
U-shaped clamping bar Oil-resistant, ergonomically shaped DE-STA-CO
Flanged or straight base handle grip
Intermediate safety link
Application areas
The additional release lever holds the clamp in the opened and closed Accessories
position. Unintentional opening and closing of the clamp is therefore Vertical clamps with a U-shaped clamping bar can be ordered in two
impossible. varieties:
Standard model number: The matching standard adjustment
This clamp is preferred for more difficult clamping conditions, e.g.
spindle is included.
vibrating conditions, transporting of sensitive parts and where the clamp
Model number contains the addition “-LS”: The model is delivered with
bar is set at an angle to the base.
two flange washers without an adjustment spindle.
Product features
Safety instructions
Additional locking device for secure clamping
To guarantee secure locking, the clamp must be adjusted to lock in the
over-center position.
Zinc plated
Models 207-UR, 210-UR

Holding
Capacity Bar
207-UR 375 100° 62º 1.00 225208-M 507107
Opening
H
210-UR 600 100° 58º 1.60 240208-M 235106
C1
C2
C

A6
L3 L2
M
B1
B
F
øD
A3
A
L1 A1
L
Model no. A A1 A3 A6 B B1 C C1 C2 ØD F H L L1 L2 L3 M
207-UR 0.75 1.38 0.31 0.15 1.25 1.70 1.25 0.63 0.12 0.28 0.33 6.90 4.58 2.09 0.50 1.30 M8 or 5/16
210-UR 1.25 1.89 0.31 0.42 1.75 2.50 1.68 0.79 0.12 0.33 0.25 8.15 6.72 3.66 0.94 2.41 M10 or 3/8

Vertical Clamps
Models 207-UBR, 210-UBR
Holding
Capacity Bar
207-UBR 375 100° 62º 1.00 225208-M 507107
Opening 207-UBR-LS without spindle 507107
210-UBR 600 103° 58º 1.60 240208-M 235106
C1

C

øD
C3
A3
A
A6 A1
L2
L1
H
C2
B2
M
F
L3
L
Model no. A A1 A3 A6 B2 C C1 C2 C3 ØD F H L L1 L2 L3 M
207-UBR 0.75 1.38 0.31 0.15 0.24 1.56 0.63 0.12 0.25 0.28 0.33 7.44 4.58 2.09 0.50 1.30 M8 or 5/16
210-UBR 1.25 1.89 0.31 0.42 0.31 2.20 0.79 0.12 0.39 0.33 0.25 9.04 6.72 3.66 0.94 2.41 M10 or 3/8

Vertical Clamps
Models 219, 229
Applications areas Product features
Featuring a unique cam action, these clamps will hold workpieces of Torsion-protected, hardened bushings in models with a holding
inconsistent height. Ideal for castings or forgings, these models – force greater than 375 lbs.
once set for the nominal or average piece height – allow for a deviation Rivets made of stainless steel
larger or smaller than average. Zinc plated
Oil-resistant, ergonomically shaped DE-STA-CO
Model 219 has an overall clamping range of 13/64", while Model 229
handle grip
has an overall clamping range of 5/16" and accommodates any 1/2",
M10, or M12 spindle,
Holding
Capacity Bar L2 D
M
Model no. [lbs.] +10º Moves [lbs.] Standard equipment Washers B B1
219 350 115° 180° 1.75 210203 235106

F A3
229 1,000 115° 180° 2.59 229203 247109 L3 A
See additional adjustment spindles beginning page 9.1 L1 A1
C1
C C2
Model no. A A1 A3 B B1 C C1 C2 ØD F H L L1 L2 L3 M
219 0.75 1.50 0.38 1.50 2.26 1.56 0.75 0.12 0.28 0.46 7.50 5.75 4.25 1.25 3.00 M8 or 5/16
229 0.88 1.88 0.50 2.00 2.75 2.05 1.00 0.19 0.33 0.49 9.94 7.14 5.26 1.45 3.81 M12 or 1/2

Vertical Clamps
Heavy-duty vertical clamps
Solid clamping bar Product features
Flanged base Hardened, polished bushings
Straight base Parts drop forged
Applications areas Oil-resistant, ergonomically shaped DE-STA-CO
This series of models is extremely robust. Heavy-duty clamping tasks handle grip
are easily fulfilled and rough handling is not a problem for this series.
The heavy-duty vertical clamps are therefore especially suitable for
welding and milling applications, for locking foam molds and similar
sever clamping applications. The heavy-duty clamping bar can be
shortened, welded to or have holes drilled to suit the application.
Models 516, 516-B

Holding
Capacity Bar
Opening Handle
Model no. [lbs.] +10º Moves [lbs.] Standard equipment
516 750 122° 66° 1.25 none
H H
(516) (516-B)
516-B 750 122° 66° 1.69 none
C1
C
ALSO AVAILABLE
L1 A1
As Air Hydrauic Model 846 Page 11.1
C2 B1
(516) (516) (516)
L
(516)
B1
(516-B)
L
(516-B)
B
F (516-B)
A3
D
A
L1 A1
(516-B) (516-B)
Model no. A A1 A3 B B1 C C1 C2 ØD F H L L1
516 – 1.62 – – 0.51 1.24 0.63 – – 0.75 6.38 4.00 2.38

516-B 1.24 2.00 0.38 1.50 2.00 1.49 0.63 0.25 0.28 0.75 6.38 4.19 2.19

Vertical Clamps
Model 518
Applications areas
This model features a forged hold-down bar and improved ergonomic
grip with handle stop built in. The forged hold-down bar can be cut or
welded to suit the user’s fixture. One of the major features of this clamp
is the greater clearance under the bar. Due to the bar design, there is
twice the normal clearance in this size clamp.
Holding
Capacity Bar
Opening Handle
518 500 90° 75° 0.82 none H
See section 16 for holding capacity charts. C1
C C2
A
A1
A3
F B B1
L1
D
Model no. A A1 A3 B B1 C C1 C2 ØD F H L L1
518 1.00 1.50 0.25 0.88 1.38 2.49 0.56 0.12 0.27 0.56 7.24 4.46 2.63

Vertical Clamps
Models 528, 528-F
Applications areas
For tough, heavy-duty workholding. Clamps have square cold-drawn
steel hold-down bars. Pivot points have serrated, hardened bushings.
Models 527 and 528 are supplied with flanged base. Also available with
front mounting base as Model 527-F. Models 528 and 528-F are
vertical handle variations of Models 527 and 527-F. All models provided
with red handle grip. Hold-down bars can be machined to meet the
application requirements.
Holding
Capacity Bar
Opening
Opening Handle
209,5
H
528 1,000 195° 65° 2.50 None

C1
22
528-F 1,000 195° 65° 2.50 None

51,5
C2
C

L1
91,5
57
B1
19
32
B
F
øD
10,5
A1
43
L
175,5 Model 528
Model 528-F
Opening
219
Model 528
H
C1
22
45
C
L1
101 C2
8
43
A1
10,5
B
øD
32
B1
57 Model 528-F
19
F
L
175,5
Model no. A1 B B1 C C1 C2 ØD F H L L1
528 1.50 1.25 2.25 2.09 0.88 0.21 0.41 0.75 8.13 6.88 3.63
528-F 1.50 1.25 2.25 1.84 0.88 0.21 0.41 0.75 7.38 6.88 4.00

Vertical Clamps
Models 548, 578, 588
Holding
Capacity Bar
Opening Handle
548 2,500 199° 129° 5.30 None
Opening
578 4,000 199° 129° 9.12 None
C1
588 6,000 199° 129° 14.75 None
C
L1 A1
H
C2
B1
B
B2
F1
L
Model no. A1 B B1 B2 C C1 C2 F1 H L L1
548 3.25 2.01 0.75 2.00 2.25 1.00 0.31 0.75 9.20 7.50 4.25
578 4.00 1.38 0.88 2.38 2.75 1.25 0.63 0.88 10.92 8.63 4.63
588 5.00 1.38 1.00 2.75 3.25 1.50 0.63 1.00 12.70 9.75 4.75

Vertical Clamps
Models 558, 568
Applications areas
These clamps are designed for the most rugged production jobs.
Handle and links are forged alloy steel, coined and machined to close
tolerances. Have hardened pivot pins and serrated hardened bushings.
Model 557 has a variable position straight base. Model 558 is a vertical
handle variation of Model 557. All hold-down bars can be machined to
meet your needs.
Holding
Capacity Bar
Opening Handle
Opening Model no. [lbs.] +10º Moves [lbs.] Standard equipment
558 2,500 192° 64° 5.00 None

568 3,300 186° 64º 5.95 None
C1
C
ALSO AVAILABLE
L1 A1
As Air Hydraulic Model 858 Page 11.13
L See additional adjustment spindles beginning page 9.1.
B3
H
B1
B
F1
Model no. A1 B B1 B3 C C1 F1 H L L1
558 2.13 1.93 0.44 1.38 3.75 1.00 1.00 11.25 8.00 4.81
568 2.13 1.93 0.44 1.38 3.35 1.38 0.98 11.25 8.00 4.81

Vertical Clamps Heavy-duty vertical clamps
Heavy-duty clamping bar Product features
Flanged or straight bases with standard hole pattern Hardened, polished bushings
Application areas Hardened, polished bolts
This series of models is extremely robust. Heavy-duty clamping tasks Parts drop-forged
are easily fulfilled and rough handling is not a problem for this series. Adjustable bar guide
The heavy-duty vertical clamps are especially suitable for welding and Oil-resistant, ergonomically shaped DE-STA-CO
milling applications, for locking foam molds and similar severe handle grip
clamping applications. The heavy-duty clamping bar can be shortened,
welded to or have holes drilled to suit the application.
Models 533-L, 535-L NEW

Holding
Capacity Bar
Opening Bolt Retainer
Model no. [lbs.] +10º [lbs.] and Spacer
Opening
533-L 1,500 120° 2.20 533108-M
535-L 2,200 120° 4.08 535108-M
See additional adjustment spindles beginning page 9.1

C1
C6
C
A8
B
H
C2
B1
B2
B3
F1
B5
B4
D1
D3
D2
Model no. A A1 A3 A4 A8 B B1 B2 B3
A4 A A3
L1 A1
533-L 1.18 2.36 0.59 0.08 0.20 1.52 0.39 0.61 1.75
L
535-L 1.77 2.95 0.59 0.12 0.10 1.89 0.47 0.77 2.13
Model no. B4 B5 C C1 C2 C6 D1 D2 D3 F1 H L L1
533-L 1.77 2.44 1.85 0.79 0.19 2.24 0.33 0.35 0.59 0.39 8.62 4.92 2.56
535-L 2.05 2.87 2.64 0.98 0.19 3.13 0.41 0.43 0.79 0.47 10.3 6.30 3.35

Vertical Clamps
Models 533-LB, 535-LB, 536-LB
Holding
Capacity Bar
Opening Bolt retainer
Model no. [lbs.] +10º [lbs.] and Spacer
Opening
533-LB 1,500 120° 2.20 533108-M
535-LB 2,200 120° 4.08 535108-M
536-LB 2,900 120° 7.72 536108-M
C1
See additional adjustment spindles beginning page 9.1
C6
A8
C
C4
D
C3
D1
A A3
L1 A1
L
B
H
C2
B1
B2
B3
Model no. A A1 A3 A8 B B1 B2 B3 C
F1
533-LB 1.18 2.36 0.59 0.20 1.52 0.39 0.61 1.75 2.17
D3
535-LB 1.77 2.95 0.59 0.10 1.89 0.47 0.77 2.18 2.95
D2
536-LB 2.17 3.74 0.79 0.20 2.36 0.63 0.91 2.62 3.74
Model no. C1 C2 C3 C4 C6 D D1 D2 D3 F1 H L L1
533-LB 0.79 0.19 0.39 0.59 2.56 0.22 0.33 0.35 0.59 0.39 9.33 4.92 2.56
535-LB 0.98 0.19 0.59 0.79 3.44 0.30 0.41 0.43 0.79 0.47 11.28 6.30 3.35
536-LB 1.18 0.25 0.59 0.98 4.33 0.38 0.49 0.51 0.87 0.63 13.15 8.07 4.33

Vertical Clamps Vertical clamps in modular design
Weldable clamping bar Product features
Handle accessory can be welded in place Hardened, polished bushings
Base plate Hardened, polished bolts
Swivel base version or mounting plate accessory available Parts drop-forged
LSC version with locking spring for securing the open position Adjustable clamping bar opening angle on LSC versions
Application areas
Model number code
This clamp can be modified to suit the requirements of your fixture.
The clamp bar, handles and base plates are welded onto the basic 5 03-MB LSC
clamp linkage. This series of models is especially robust and precise
due to its manufacturing process. These highly flexible vertical handle Locking hold-open device
clamps are, therefore, especially suitable for welding operations in the Base option
automobile manufacturing sector, milling operations, locking foam B = swivel mounting base
molds and containers and all applications in which precision and high MB = swivel mounting base
forces are required. MLB = mounting plate
Design/size
Heavy-duty vertical clamp in modular design
Model 505-MLB in a robot-type welding fixture
open position
clamping position 2
4 5 1 2 3
4 5
Hold-open device 4. Lock the hold-open arm 1 in the leaf spring 2

1. Mount and close the clamp 5. Set the clamp in the desired opening position
2. Weld guide links 4 to the base 5 6. Maintain this position and weld the hold-open arm 1 to the side of
3. Weld the base 5 to the fixture the clamp 4

Vertical Clamps
Models 501-B, 503-MB, 503-MBLSC, 505-MB,
505-MBLSC, 506-MB, 506-MBLSC,
Holding
A øD1
Capacity Bar
Opening
Model no. [lbs.] +10º [lbs.]
R
60 501-B 560 200° 0.50
H3
° Opening
503-MB 1,500 200° 1.50

H
503-MBLSC 1,500 200° 1.50

H1
505-MB 2,400 200° 3.00

A1 A2
505-MBLSC 2,400 200° 3.00
506-MB 5,000 200° 5.70
506-MBLSC 5,000 200° 5.70
B
øD
B1
B3 Model 503-MB
LSC-version
Model 503-MBLSC
Model no. A A1 A2 B B1 B3 ØD ØD1 H H1 H3 R
501-B 28.50 14.50 19.00 28.00 6.40 28.00 4.70 12.00 28.00 20.00 56.00 9.50
503-MB 39.50 13.00 28.50 38.50 10.00 45.00 7.90 18.00 51.00 20.00 88.50 13.50
503-MBLSC 39.50 13.00 28.50 38.50 10.00 45.00 7.90 18.00 51.00 20.00 88.50 13.50
505-MB 56.50 25.00 35.00 48.00 12.30 54.00 9.50 22.00 71.50 28.00 110.00 18.00
505-MBLSC 56.50 25.00 35.00 48.00 12.30 54.00 9.50 22.00 71.50 28.00 110.00 18.00
506-MB 72.00 32.50 51.00 60.00 16.00 67.00 12.70 28.00 87.50 33.00 135.00 21.00
506-MBLSC 72.00 32.50 51.00 60.00 16.00 67.00 12.70 28.00 87.50 33.00 135.00 21.00
Note: Dimensions are shown in metric (mm).

Vertical Clamps
Models 501-LB, 503-MLB, 503-MLBLSC, 505-MLB,
505-MLBLSC, 506-MLB, 506-MLBLSC,
Holding
A øD1
Capacity Bar
Opening
R
60°
501-LB 560 200° 0.50
H3
Opening
503-MLB 1,500 200° 1.50
H
503-MLBLSC 1,500 200° 1.50
505-MLB 2,400 200° 3.00
H2
505-MLBLSC 2,400 200° 3.00
A1 A4
506-MLB 5,000 200° 5.70
A3
506-MLBL 5,000 200° 5.70
øD
B1
B2
Model 503-MLB
B3
LSC-version
Model 503-MLBLSC
Model no. A A1 A3 A4 B B1 B2 B3 ØD ØD1 H H2 H3 R
501-LB 28.50 15.00 27.00 13.50 28.00 6.40 13.00 28.00 4.70 12.00 28.00 33.50 56.00 9.50
503-MLB 39.50 14.00 44.50 19.00 38.50 10.00 19.50 45.00 7.90 18.00 51.00 50.00 88.50 13.50
503-MLBLSC 39.50 14.00 44.50 19.00 38.50 10.00 19.50 45.00 7.90 18.00 51.00 50.00 88.50 13.50
505-MLB 56.50 29.00 53.00 27.50 48.00 12.30 21.50 54.00 9.50 22.00 71.50 63.50 110.0 18.00
505-MLBLSC 56.50 29.00 53.00 27.50 48.00 12.30 21.50 54.00 9.50 22.00 71.50 63.50 110.0 18.00
506-MLB 72.00 35.50 65.50 37.00 60.00 16.00 28.50 67.00 12.70 28.00 87.50 76.00 135.5 21.00
506-MLBLSC 72.00 35.50 65.50 37.00 60.00 16.00 28.50 67.00 12.70 28.00 87.50 76.00 135.5 21.00
Note: Dimensions are shown in millimeters

Vertical Clamps
Vertical clamps in modular design/accessories
The modular design of this series of models allows you to set up the
vertical clamp according to your specific requirements.
The clamping bar, the baseplate and the handle can be adapted to
handle
suit the fixture.
H1
Important note
The forged parts must be heated up to 400° F (200° C) prior to the
welding operation. For this reason, the handle and clamping arm
øD1
should be welded together with the disassembled mating parts
of the clamp. Ideal for welding in the cold state, welding additives
must be used.
Clamp bar L3
L2
øD (4x)
F
C1
B A
B1 A1
S base plate
Completion parts Handle Clamping Bar Baseplate

(made of low carbon steel)
Model no.
Fitting the vertical clamps

Heavy version
See pages 2.25 and 2.26 ØD1 ~H1 C1 F L2 L3 A A1 B B1 ØD S
Series 501 (all models) 6x10 61 – – – – – – – – – – 501503

– – 15 15 40 10 – – – – – – 501501
Model 501-B – – – – – – 25 40 35 50 6.3 8 503502
Series 503 (all models) ø18 104.5 – – – – – – – – – – 503503

ø18 129.5 – – – – – – – – – – 503503-L
– – 25 20 50 8 – – – – – – 503501
Models 503-MB, 503-MBLSC – – – – – – 25 40 35 50 6.3 8 503502
Series 505 (all models) ø22 114 – – – – – – – – – – 505503

ø22 159 – – – – – – – – – – 505503-L
– – 30 25 60 12 – – – – – – 505501
Models 505-MB, 505-MBLSC – – – – – – 40 60 30 50 8.1 8 505502
Series 506 (all models) ø28 123 – – – – – – – – – – 506503

ø28 188 – – – – – – – – – – 506503-L
– – 35 30 75 15 – – – – – – 506501
Model 506-MB, 506-MBL – – – – – – 50 70 45 65 8.1 8 506502
Note: Dimensions are shown in millimeters

Vertical Clamps Cam action clamps for variable workpiece thickness
Ideal for variable workpiece thickness Product features
Heavy-duty clamping bar Parts casted
Flanged base Hardened bushings
Includes mounting holes
Application areas
The DE-STA-CO cam clamps have a high-to-low limit clamping range
that automatically compensates for part thickness variation and
therefore eliminates time-consuming readjustments. The cam action
resists vibrational loosening. They are built to take abuse. The clamps
are available in five sizes. Part variation thickness allowance is from
1/8" to 3/8".
Models 7-101, 7-58, 7-59,7-60, 7-61

Holding
Capacity Bar
Opening
7-101 475 80° 1.00 Position B Position A
7-58 600 95° 2.00 Opening

7-59 1,000 95° 3.00 max. tolerance at the
end of the clamping arm
7-60 1,600 80° 5.00 S max.
7-61 3,750 90° 15.00
handle position A
handle position B
Model 7-101 Model 7-60
Model no. A A1 A3 B B1 C C1 C2 C3 ØD F1 H L L1 L2 S Max.
7-101 0.75 1.25 0.25 1.25 1.75 1.44 0.50 0.31 1.00 0.22 0.49 5.00 4.62 3.12 – 0.13
7-58 1.00 1.69 0.34 1.62 2.25 1.87 0.56 0.38 1.12 0.28 0.50 7.00 6.99 2.55 – 0.13
7-59 1.38 2.06 0.39 1.88 2.50 2.19 0.63 0.44 1.25 0.34 0.63 8.50 6.00 3.50 1.24 0.19
7-60 1.62 2.44 0.44 2.12 2.88 2.50 0.88 0.50 1.44 0.41 0.75 9.50 7.40 4.38 1.97 0.25
7-61 2.00 3.00 0.50 3.50 4.50 2.86 1.25 0.62 1.68 0.53 1.13 13.93 9.76 5.93 – 0.38

Vertical Clamps
Vertical clamps with front attachment
U-shaped or solid clamping bar Accessories
Application areas Vertical handle clamps with a U-shaped clamping arm can be ordered in
Ideal for applications in the assembly industry in which workholding is two varieties:
performed with clamping forces of up to 500 lbs., including assembling, Standard model number: The matching standard adjustment
drilling, testing, positioning, milling and other processing operations. spindle is included
Model number containing “-LS”: The model is delivered with two
Product features flanged washers without an adjustment spindle.
Zinc plated
handle grip
NEW
Model 207-SF
Holding
Capacity Bar
Opening Bolt
Opening
Model no. [lbs.] +10º [lbs.] Retainer
207-SF 500 90° 0.84 207105

C1
C
A1
A
C2
B
A4
B1
L1
B1
B
øD1
F
øD
A3
A4 A
A1 A5
L
Model no. A A1 A3 A4 A5 B B1 C C1 C2 ØD ØD1 F H L L1 M
207-SF 0.63 1.38 0.12 0.43 0.45 1.00 1.50 2.68 0.63 0.12 0.26 0.33 0.24 8.15 5.04 3.21 M8

Vertical Clamps
Model 207-UF
NEW
Holding
Capacity Bar
Opening Flanged
Model no. [lbs.] +10º [lbs.] Standard equipment Washers
Opening
207-UF 375 90° 0.94 225208-M 507107
207-UF-LS without spindle 507107
C1
C
A1
A
A4
B
C2
B1
L1
L3
L2
Model no. A A1 A3 A4 A5 B B1 C C1
B1
B
F
207-UF 0.63 1.38 0.12 0.43 0.45 1.00 1.50 2.68 0.63 M øD
A3
A4
Model no. C2 ØD F H L L1 L2 L3 M A
A1 A5
207-UF 0.12 0.26 0.33 8.15 3.70 1.87 0.30 1.30 M8 L

Vertical Clamps
With very large opening angle
Application areas Accessories
Ideal for all areas of the assembly industry in which workholding is Vertical clamps with a U-shaped clamping bar can be ordered in
performed with holding capacities of up to 375 lbs. For example, two varieties:
assembling, drilling, testing, positioning, milling and other processing Standard model number: The standard adjustment spindle is
operations. included
Product features Model number containing “-LS”: The model is delivered with two
Extremely large arm opening angle (185º) flange washers without an adjustment spindle
Handle position is identical in clamped position
and open position
Zinc plated
handle grip
Model 317-S
Holding
Opening Capacity Bar
Opening Handle Bolt
Model no. [lbs.] +10º Moves [lbs.] Retainer
C1
317-S 375 185° 60° 0.75 207105

C
ALSO AVAILABLE
L1
As Air Hydraulic Model 817-S Page 11.14
Solid clamping bar

A1
A
Dual position mounting base

A3
øD
B
B1
A1
A3 A
øD
øD1
B
F
Model no. A A1 A3 B B1 C C1 ØD ØD1 F H L L1
317-S 0.63 1.38 0.44 1.00 1.50 2.69 0.63 0.27 0.33 0.25 5.54 6.57 3.20

Vertical Clamps
Model 317-U
Holding
Capacity Bar Opening
Opening Handle
C1
317-U 375 185° 60° 0.75 507208-M
317-U-LS without spindle
H
ALSO AVAILABLE
As Air Hydraulic Model 817-U Page11.15 L1

U-shaped clamping bar

Dual position mounting base
A1
A3 A
øD
B
B1
A1
A3 A
M øD
B
L
Model no. A A1 A3 B B1 C C1 ØD F H L L1 M
317-U 0.63 1.38 0.44 1.00 1.50 2.68 0.63 0.27 0.34 5.64 5.90 2.53 M8 or 5/16

Vertical Clamps
With very large opening angle
Heavy-duty clamping bar Product features
With flanged base or front mount Extremely large opening angle (195º)
Application areas Handle position is identical in the clamped position and
Ideal for all areas in which workholding is performed with holding open position
capacities of up to 2,500 lbs. Due to design, these models are Torsion-protected, hardened bushings
especially suitable for use in demanding work environments, including Rivets made of stainless steel
assembling, drilling, testing, positioning, milling and other processing Additional lever added to the link to facilitate one-handed
operations. operation for opening and closing.
The heavy-duty clamping bar can be shortened or lengthened to the

desired length, and holes can be drilled (for spindle assembly).
Model 527
Holding
Capacity Bar
Opening Opening Handle
527 1,000 195° 65° 2.50 none
C1
C2
C
Solid clamping bar

H
L1 Flanged base
B1
B
F
øD
A1
L
527 1.77 1.25 2.25 2.20 0.75 0.21 0.41 0.75 7.08 8.63 3.27

Vertical Clamps
Model 527-F
Holding
Opening
Capacity Bar
Opening Handle
C1
527-F 1,000 195° 65° 2.50 none
C
Solid clamping bar L1 C2
Front mounting base
A1
H
øD
B
B1
527-F 1.77 1.25 2.25 1.92 0.75 0.21 0.41 0.75 7.34 8.65 3.81
Model 557
Opening
Holding
Capacity Bar
C1
Opening Handle
C
557 2,500 192° 64° 5.00 none
L1 A1
Solid clamping bar
Straight base
L
H
B1
B3
B
Model no. A1 B B1 B3 C C1 F1 H L L1
557 2.13 1.93 0.44 1.38 3.75 1.00 1.00 8.13 9.31 4.81

Vertical Clamps
Models 91090, 91140
Holding
Capacity Bar
Opening Handle
Model no. [lbs.] +10º Moves [lbs.] Standard Equipment
91090 385 100° 60° 0.81 None
F 91140 1,000 100° 65° 3.10 None

L3
øD
L1 C
A A1
B B
L B1
Model no. A A1 B B1 C øD F H L L1 L3
91090 0.80 1.32 1.29 2.09 2.68 0.28 0.33 7.68 4.72 3.09 2.40
91140 1.26 2.17 1.81 2.74 5.24 0.33 0.43 11.06 7.87 5.24 4.41
Model VH3
Information Lightweight, non-conductive, chemical resistant
Vertical handle toggle clamps for workholding. Toggle action locks the Locking toggle action
workpiece securely. The arm opens 100° for loading. Reinforced Spindle assembly included
polymer spindle assembly with neoprene tip is included, and can be Constructed of reinforced polymers combining high strength
positioned on the arm using the convenient indicator. and light weight
Holding
Capacity
Bar Model no. [lbs.] [lbs.] Standard equipment

VH3 200 0.25 Rubber-tipped
composite spindle

Dia.
Model no. A B C D E F
VH3 5.63 4.75 1.89 1.10 0.28 0.47

Vertical Clamps Notes

Horizontal Clamps
New products
NEW NEW
2000 Horizontal Series: 2000 Horizontal DE-STA-CO® Toggle Lock Plus Series:
Models 2013, 2017, 2027 and 2037 Models 2013-R, 2017-R, 2027-R and 2037-R
page 3.5 page 3.7

Horizontal Clamps Product group – horizontal clamps
Application areas Basic product features
Application areas include clamping during the assembling, drilling, In the clamped position, the handle is horizontal
testing, gluing and locking of covers, and much more. The horizontal (minimum overall height)
clamp is distinguished by the low profile of the clamping arm in the Horizontal clamp opening angles range from 90° to 105°
clamped position. Due to its minimum overall height, the horizontal Horizontal clamps are offered with U-shaped and solid
clamp is especially suitable for installation in con fined spaces. clamping bars
Horizontal clamps have a straight or flanged base
Model 205-U in a drilling fixture

Horizontal Clamps
Product group – horizontal clamps
2013-U 295 NEW! Standard 3.5 225-UR 500 Standard 3.13
2017-U 560 NEW! Standard 235-UR 750 Standard
2027-U 840 NEW! Standard
2037-U 1,680 NEW! Standard
2013-UB 295 NEW! Standard 3.6 213-U 150 Standard 3.14

2017-UB 560 NEW! Standard 217-U 200 Standard
2027-UB 840 NEW! Standard 227-U 500 Standard
2037-UB 1,680 NEW! Standard 237-U 750 Standard
245-U 1,000 Standard
2013-UR 295 NEW! DE-STA-CO® 3.7 213-UB 150 Standard 3.15

2017-UR 560 Toggle Lock Plus 217-UB 200 Standard
2027-UR 840 NEW! DE-STA-CO® 227-UB 500 Standard
2037-UR 1,680 Toggle Lock Plus 237-UB 750 Standard
NEW! DE-STA-CO®
Toggle Lock Plus
NEW! DE-STA-CO®
Toggle Lock Plus
2013-UBR 295 NEW! DE-STA-CO® 3.8 305-U 150 Standard 3.16
2017-UBR 560 Toggle Lock Plus 307-U 350 Standard
2027-UBR 840 NEW! DE-STA-CO® 309-U 750 Standard
2037-UBR 1,680 Toggle Lock Plus
NEW! DE-STA-CO®
Toggle Lock Plus
NEW! DE-STA-CO®
Toggle Lock Plus
205-S 60 Standard 3.9 305-UR 150 Compact 3.17
205-SL 60 Standard 307-UR 350 Compact
205-SR 60 Standard 309-UR 750 Compact
215-S 200 Standard
205-SB 60 Standard 3.10 515 800 Standard 3.18

215-SB 200 Standard 515-B 800 Standard
205-U 60 Standard 3.11

205-UL 60 Standard
205-UR 60 Standard
215-U 200 Standard
225-U 500 Standard
235-U 750 Standard
205-UB 60 Standard 3.12

215-UB 200 Standard
225-UB 500 Standard
235-UB 750 Standard

Horizontal Clamps 2000-Series, horizontal clamps
NEW
Robust Design Long Handle

Offers an average of twice Increased operator comfort
the holding capacity of our
legacy products
Low arm deflection under load
(greater stiffness)

Locks handle in open
and closed positions
Available standard or
as an add-on kit
Common Hole Pattern

Interchangeable with
NEW PHOTO COMING Large Hand Clearance
Eliminates “knuckle busters”
legacy clamp models:
213-U
FROM DSC
217-U
227-U
237-U
Adjustable Pre-load Bushings at Key Pivot Points

Eliminates arm play for Provides long life
locating applications and smooth operation
Two positions available
(use upper hole first;
lower hole as clamp wears)
Low Pivot Point Fixed Handle Pivot

Provides perpendicular Eliminates sticking points
clamping force Provides smooth action

Horizontal Clamps
Models 2013-U, 2017-U, 2027-U, 2037-U
NEW
Holding
Capacity Bar
t
Paten Opening Flanged
d i n g
Pen Model no. [lbs.] +10º [lbs.] Standard equipment Washers
2013-U 295 71° 0.37 2013208-M 102111
2017-U 560 73° 0.97 215208-M 215105
2027-U 840 68° 1.34 2007208-M 507107
2037-U 1,680 73° .95 240208-M 410P1312
2037-U-LS without spindle 410P1312
ALSO AVAILABLE
As DE-STA-CO® Models 2013-UR, 2017-UR, Page 3.6
Toggle Lock Plus 2027-UR, 2037-UR
Flanged base
A3
L2
L3
B B1
F
B3 A2
A
A1
Opening
58°
M
C1
H
C
C2
L1
.Model no. A A1 A2 A3 B B1 B3 C C1 C2 F H L L1 L2 L3 M
2013-U 0.53 1.00 0.17 0.24 0.70 1.06 0.03 0.75 0.50 0.11 0.21 1.27 5.88 1.65 0.41 0.83 M5 or 10-32
2017-U 1.03 1.68 0.27 0.32 1.21 1.86 0.11 0.98 0.75 0.12 0.24 1.95 8.62 2.53 0.55 1.48 M6 or 1/4-20
2027-U 1.03 1.56 0.27 0.40 1.21 1.81 0.11 1.32 0.75 0.16 0.33 2.20 9.88 2.86 0.81 1.44 M8 or 5/16-18
2037-U 1.63 2.43 0.34 0.40 1.69 2.50 0.08 1.62 1.00 0.16 0.42 2.75 13.35 4.40 0.90 2.72 M10 or 3/8-16

Horizontal Clamps
Models 2013-UB, 2017-UB, 2027-UB, 2037-UB NEW
Holding
Capacity Bar
Opening Flanged
t
Model no. [lbs.] +10º [lbs.] Standard equipment Washers Paten
d i n g
2013-UB 295 70° 0.37 2013208-M 102111 Pen
2017-UB 560 73° 0.97 215208-M 215105
2027-UB 840 70° 1.34 2007208-M 507107
2037-UB 1,680 70° 2.95 240208-M 410P1312
2037-UB-LS without spindle 410P1312
ALSO AVAILABLE
As DE-STA-CO® Models 2013-UBR, Page 3.7
Toggle Lock Plus 2017-UBR, 2027-UBR, 2037-UBR
Straight base
Opening
M L2
C1
H
C
B4
B3 A2 C2
A3 A
B2
L1 A1
L3
Model no. A A1 A2 A3 B2 B3 B4 C C1 C2 F H L L1 L2 L3 M
2013-UB 0.53 1.28 0.17 0.24 0.16 0.03 0.58 1.20 0.50 0.11 0.21 1.99 5.88 1.65 0.41 0.83 M5 or 10-32
2017-UB 1.03 1.92 0.27 0.32 0.20 0.11 0.86 1.60 0.75 0.12 0.24 3.00 8.62 2.53 0.55 1.48 M6 or 1/4-20
2027-UB 1.03 1.92 0.27 0.40 0.24 0.11 0.86 2.04 0.75 0.16 0.33 3.28 9.88 2.86 0.81 1.44 M8 or 5/16-18
2037-UB 1.63 2.64 0.34 0.40 0.32 0.08 1.13 2.56 1.00 0.16 0.42 4.17 13.35 4.40 0.90 2.72 M10 or 3/8-16

Horizontal Clamps
Models 2013-UR, 2017-UR, 2027-UR, 2037-UR
NEW
Holding
Capacity Bar
t Opening Flanged
Paten Model no. [lbs.] +10º [lbs.] Standard equipment Washers
i n g
Pend
2013-UR 295 70° 0.37 2013208-M 102111
2017-UR 560 73° 0.97 215208-M 215105
2027-UR 840 70° 1.34 2007208-M 507107
2037-UR 1,680 70° 2.95 240208-M 410P1312
2037-UR-LS without spindle 410P1312
Flanged base
Opening
C1
H
C
C2
L3 L2 A2
F B B1
B3 A3
A
L1 A1
Model no. A A1 A2 A3 B B1 B3 C C1 C2 F H L L1 L2 L3 M
2013-UR 0.53 1.00 0.17 0.24 0.70 1.06 0.03 0.75 0.50 0.11 0.21 1.27 5.88 1.65 0.41 0.83 M5 or 10-32
2017-UR 1.03 1.68 0.27 0.32 1.21 1.86 0.11 0.98 0.75 0.12 0.24 1.95 8.62 2.53 0.55 1.48 M6 or 1/4-20
2027-UR 1.03 1.56 0.27 0.40 1.21 1.81 0.11 1.32 0.75 0.16 0.33 2.20 9.88 2.86 0.81 1.44 M8 or 5/16-18
2037-UR 1.63 2.43 0.34 0.40 1.69 2.50 0.08 1.62 1.00 0.16 0.42 2.75 13.35 4.40 0.90 2.72 M10 or 3/8-16

Horizontal Clamps
Models 2013-UBR, 2017-UBR, 2027-UBR, 2037-UBR NEW
Holding
Capacity Bar
Opening Flanged
t
Model no. [lbs.] +10º [lbs.] Standard equipment Washers Paten
d i n g
2013-UBR 295 70° 0.37 2013208-M 102111 Pen
2017-UBR 560 73° 0.97 215208-M 215105
2027-UBR 840 70° 1.34 2007208-M 507107
2037-UBR 1,680 70° 2.95 240208-M 410P1312
2037-UBR-LS without spindle 410P1312
Straight base
Opening
M L2
C1
H
C
A2
B4
B3 A3 C2
A B2
L1 A1
F
L3
Model no. A A1 A2 A3 B2 B3 B4 C C1 C2 F H L L1 L2 L3 M
2013-UBR 0.53 1.28 0.17 0.24 0.16 0.03 0.58 1.20 0.50 0.11 0.21 1.99 5.88 1.65 0.41 0.83 M5 or 10-32
2017-UBR 1.03 1.92 0.27 0.32 0.20 0.11 0.86 1.60 0.75 0.12 0.24 3.00 8.62 2.53 0.55 1.48 M6 or 1/4-20
2027-UBR 1.03 1.92 0.27 0.40 0.24 0.11 0.86 2.04 0.75 0.16 0.33 3.28 9.88 2.86 0.81 1.44 M8 or 5/16-18
2037-UBR 1.63 2.64 0.34 0.40 0.32 0.08 1.13 2.56 1.00 0.16 0.42 4.17 13.35 4.40 0.90 2.72 M10 or 3/8-16

Horizontal Clamps
Standard horizontal clamps
U-shaped and solid clamping bars Product features
Flanged or straight base Rivets made of stainless steel
Zinc plated
Application areas
Ideal for all areas in which clamping work is performed with holding
handle grip
capacities of up to 750 lbs.
Accessories
Applications Include assembling, drilling, testing, gluing and other
Horizontal clamps with a U-shaped clamping bar can be ordered
processing operations. Suitable for use in welding fixtures, and gauge
in two varieties:
manufacturing, as well as in the woodworking industry.
Standard model number: The standard adjustment spindle
is included.
Model number containing “-LS”: The model is delivered
with two flanged washers without an adjustment spindle.
Models 205-S, 205-SL, 205-SR, 215-S

Holding
Capacity Bar
Opening Bolt
Model no. [lbs.] +10º [lbs.] Standard equipment Retainer
205-S 60 90° 0.06 205208-M None
L
205-S-LS without spindle None
C
205-SL 60 90° 0.06 205208-M None
C
H
205-SR 60 90° 0.06 205208-M None
215-S 200 90° 0.34 202208-M 205105
C2
L1
B3
A3 ALSO AVAILABLE
F
In Stainless Steel Model 205-SSS Page 8.6
B B1
See accessories beginning on age 9.1.

M
A4
A
Solid or fixed spindle bar
A1
Flanged base
Model 215-S
Model 205-S Model 205-SL Model 205-SR
Model no. A A1 A3 A4 A5 B B1 B3 C C1 C2 F H L L1 M
205-S 0.44 0.94 0.16 0.63 0.30 0.62 0.93 0.17 0.37 0.12 0.06 0.17 0.67 2.78 0.88 M4 or #10
205-SL 0.44 0.94 0.16 0.63 0.30 – – 0.17 0.37 0.12 0.06 0.17 0.67 2.78 0.88 M4 or #10
205-SR 0.44 0.94 0.16 0.63 0.30 – – 0.17 0.37 0.12 0.06 0.17 0.67 2.78 0.88 M4 or #10
215-S 1.00 1.44 0.19 1.06 0.43 0.88 1.37 0.20 1.03 – 0.10 – 1.53 5.50 2.31 M6 or 1/4

Horizontal Clamps
Models 205-SB, 215-SB
Holding
Capacity Bar
Opening Standard Bolt
Model no. [lbs.] +10º [lbs.] equipment Retainer
A5
205-SB 60 90° 0.06 205208-M None
205-SB-LS without spindle None C1 M
215-SB 200 90° 0.34 202208-M 205105

C H

A3 A4 C2
B3
A B2
Straight bases
A1
Solid or fixed spindle bars
L
L1
Model 205-SB Model 215-SB
Model no. A A1 A3 A4 A5 B2 B3 C C1 C2 F H L L1 M
205-SB 0.44 0.94 0.16 0.63 0.30 – 0.17 0.37 0.12 0.06 0.17 0.67 2.78 0.88 M4 or #10
215-SB 1.00 1.44 0.19 1.06 0.43 0.19 0.20 1.28 0.50 0.10 0.28 1.78 5.50 2.31 M6 or #10

Horizontal Clamps
Models 205-U, 205-UL, 205-UR, 215-U, 225-U, 235-U
Holding
Capacity Bar
Opening Flanged
A5
Opening Model no. [lbs.] +10º [lbs.] Standard equipment Washers
M 205-U 60 90° 0.06 205208-M 105106

C1
205-UL 60 90° 0.06 205208-M 105106
H
C
205-UR 60 90° 0.06 205208-M 105106
C2
215-U 200 90° 0.34 202208-M 215105
L3 L2 A2
225-U 500 90° 0.55 225208-M 507107
B1
B
F
235-U 750 90° 1.47 240208-M 235106

B3
A4 A A4 235-U-LS without spindle 235106

A3
L1 A1
L ALSO AVAILABLE
In Stainless Steel Model 205-USS Page 8.6
As DE-STA-CO® Model 225-UR Page 3.12


Flanged base
Model 215-U (Shown) Model 205-UL Model 205-UR
Model no. A A1 A2 A3 A4 A5 B B1 B3 C C1 C2 F H L L1 L2 L3 M
205-U 0.44 0.94 – 0.16 0.63 0.22 0.62 0.93 0.17 0.31 0.26 0.06 0.20 0.67 2.65 0.74 0.26 0.37 M4 or #10
205-UL 0.44 0.94 – 0.16 0.63 0.22 – – 0.17 0.31 0.26 0.06 0.20 0.67 2.65 0.74 0.26 0.37 M4 or #10
205-UR 0.44 0.94 – 0.16 0.63 0.22 – – 0.17 0.31 0.26 0.06 0.20 0.67 2.65 0.74 0.26 0.37 M4 or #10
215-U 1.00 1.44 – 0.19 1.06 0.43 0.88 1.37 0.20 1.00 0.49 0.10 0.28 1.53 5.50 2.25 0.81 1.25 M6 or 1/4
225-U 1.00 1.50 0.26 0.25 – 0.49 0.88 1.38 0.30 1.32 0.49 0.12 0.31 1.84 6.70 2.72 1.08 1.39 M8 or 5/16
235-U 1.63 2.25 – 0.37 – 0.69 1.63 2.25 0.34 1.75 0.75 0.16 0.43 2.55 10.87 4.16 1.61 2.28 M10 or 3/8

Horizontal Clamps
Models 205-UB, 215-UB, 225-UB, 235-UB
Holding
Capacity Bar
Opening Standard Flanged
A5
Model no. [lbs.] +10º [lbs.] equipment Washers
Opening
Opening angle
205-UB 60 90° 0.06 205208-M 105106

M
215-UB 200 90° 0.34 202208-M 215105
C1
H
C
A2
225-UB 500 90° 0.55 225208-M 507107
B3
A4 A A4
225-UB-LS without spindle 507107 L2 A3
235-UB 750 90° 1.47 240208-M 235106 L1 A1

L
ALSO AVAILABLE
Model 205-UB
In Stainless Steel Model 225-UBSS Page 8.9
U-shaped clamping bar C2 B2

B2 C2
Straight base
F
L3
Model 215-UB (Shown)
Model no. A A1 A2 A3 A4 A5 B2 B3 C C1 C2 F H L L1 L2 L3 M
205-UB 0.44 0.94 0.27 0.16 0.63 0.22 0.06 0.17 0.53 0.26 0.12 0.20 0.84 2.65 0.74 0.26 0.37 M4 or #10
215-UB 1.00 1.44 0.20 0.19 1.06 0.43 0.20 0.20 1.28 0.49 0.10 0.28 1.78 5.50 2.25 0.81 1.25 M6 or 1/4
225-UB 1.00 1.50 0.27 0.25 – 0.49 – 0.27 1.83 0.49 0.24 0.31 2.38 6.70 2.72 1.08 1.39 M8 or 5/16
235-UB 1.63 2.25 0.33 0.37 – 0.69 0.31 0.33 2.16 0.75 0.16 0.43 2.91 10.87 4.16 1.61 2.28 M10 or 3/8

Horizontal Clamps
Horizontal clamps with DE-STA-CO® Toggle Lock Plus
Clamping arm U-shaped Product features
Flanged base Additional locking lever device for secure clamping
The additional latch holds the clamp in the closed position. Zinc plated
Oil-resistant, vinyl dipped handle grip
This clamp is preferred for more difficult clamping conditions, e.g.,
Accessories
vibrating conditions, transporting of sensitive parts, and where the
clamp bar is set at an angle to the base.
in two varieties:
is included.
flanged washers without an adjustment spindle.
Safety instructions
To guarantee secure positive locking, the clamp must be adjusted to go
into to the over-center position.
Models 225-UR, 235-UR

Holding
Capacity Bar
Opening Flanged
M
Opening
225-UR 500 90° 0.69 225208-M 507107

C1

H
C
235-UR 750 90° 1.64 240208-M 235106

C2

B1
B

B3
Flanged base
F
øD DE-STA-CO® Toggle Lock Plus

A3 A
L3 L2 A1
L1
L
Model no. A A1 A3 B B1 B3 C C1 C2 ØD F H L L1 L2 L3 M
225-UR 1.00 1.50 0.25 0.88 1.38 0.30 1.32 0.49 0.12 0.27 0.31 1.92 7.14 2.69 1.08 1.35 M8 or 5/16
235-UR 1.63 2.25 0.37 1.63 2.25 0.34 1.75 0.75 0.16 0.33 0.43 2.55 10.87 4.16 1.61 2.28 M10 or 3/8

Horizontal Clamps Standard horizontal clamps
U-shaped and solid clamping bars Rivets made of stainless steel
Flanged or straight base Zinc plated
Application areas Oil-resistant, ergonomically shaped DE-STA-CO
Ideal for applications in which clamping work is performed with holding handle grip
capacities of up to 1,000 lbs. Accessories
Applications include assembling, drilling, testing, gluing and other Horizontal clamps with a U-shaped clamping bar can be ordered
processing operations. These clamps are suitable for use in welding in two varieties:
fixtures and in gauge manufacturing as well as in the woodworking Standard model number: The standard adjustment spindle
industry. is included.
Model number containing “-LS”: The model is delivered
Product features with two flanged washers without an adjustment spindle.
U-shaped clamping bar Adjusting screw for the base bar guide is not included.
Greater hand clearance between the clamping bar and handle
Models 213-U, 217-U, 227-U, 237-U, 245-U

Holding
Capacity Bar
Opening Flanged
213-U 150 90° 0 .17 213208-M 102111

217-U 200 92° 0.40 202208-M 215105
227-U 500 92° 0.68 225208-M 507107
237-U 750 92° 1.60 240208-M 235106
245-U 1,000 105° 2.90 247208-M 247109
ALSO AVAILABLE

Flanged base
Model no. A A1 A2 A3 A5 A6 B B1 B3 C C1 C2 ØD1 F H L L1 L2 L3 M
213-U 0.53 1.00 0.17 0.23 0.22 – 0.75 1.06 0.06 0.65 0.37 0.08 – 0.21 1.40 4.06 1.40 0.38 0.85 #10
217-U 1.03 1.46 0.22 0.21 0.30 0.73 1.12 1.55 0.12 0.92 0.49 0.10 0.19 0.25 1.95 7.00 2.31 0.56 1.54 1/4
227-U 1.02 1.57 0.26 0.28 0.14 0.79 1.24 1.74 0.10 1.25 0.56 0.12 0.19 0.33 2.40 7.50 2.65 0.83 1.54 5/16
237-U 1.61 2.24 0.35 0.31 0.60 1.12 1.69 2.28 0.08 1.67 0.75 0.16 0.23 0.42 3.18 11.02 4.00 0.97 2.76 3/8
245-U 1.63 2.63 0.34 0.50 1.43 – 1.62 2.62 – 2.19 1.00 0.19 – 0.53 4.25 12.25 4.88 1.37 3.20 1/4

Horizontal Clamps
Models 213-UB, 217-UB, 227-UB, 237-UB
Holding
Capacity Bar
Opening Flanged
213-UB 150 90° 0.17 213208-M 102111

217-UB 200 92° 0.40 202208-M 215105
227-UB 500 92° 0.68 225208-M 507107
237-UB 750 92° 1.60 240208-M 235106

Straight base
Model no. A A1 A2 A3 A5 A6 B2 B3 C C1 C2 ØD1 F H L L1 L2 L3 M
213-UB 0.53 1.00 0.17 0.23 0.22 – 0.16 0.06 0.77 0.37 0.08 – 0.21 1.73 4.06 1.43 0.38 0.85 #10
217-UB 1.03 1.46 0.22 0.21 0.30 0.73 0.20 0.12 1.11 0.49 0.10 0.19 0.25 2.47 7.00 2.31 0.56 1.54 1/4
227-UB 1.02 1.57 0.26 0.28 0.14 0.79 0.24 0.10 1.45 0.56 0.12 0.19 0.33 2.96 7.50 2.65 0.83 1.54 5/16
237-UB 1.61 2.24 0.35 0.31 0.60 1.12 0.31 0.08 2.00 0.75 0.16 0.23 0.42 3.89 11.02 4.00 0.97 2.76 3/8

Horizontal Clamps Compact clamps
Flanged base Rivets made of stainless steel
Application areas Zinc plated
Oil-resistant, vinyl dipped handle grip
This clamp range is distinguished by its very compact design. It is
especially suitable for use in very confined space. Accessories
Application examples include all areas in which clamping work is
in two varieties:
performed with holding capacities of up to 750 lbs., including
gluing, soldering, clamping of materials, assembling, drilling,
is included.
testing, positioning and other processing operations.
flange washers without an adjustment spindle.
Models 305-U, 307-U, 309-U

Holding
Capacity Bar
Opening Flanged
305-U 150 92° 0.13 305208-M 102111 Opening

M
307-U 350 92° 0.54 307208-M 507107
H
C1
309-U 750 92° 1.30 309208 235106
C2
C
ALSO AVAILABLE
L3 L2
As DE-STA-CO® Model 305-UR Page 3.18
Model 309-UR Page 3.18
B1
B
F

øD
Flanged base A3 A
L1 A1
L
305-U 0.53 1.02 0.25 0.63 1.00 0.48 0.31 0.08 0.18 0.21 1.43 2.21 1.19 0.51 0.50 M5 or #10
307-U 0.91 1.72 0.40 1.14 1.80 0.89 0.50 0.12 0.28 0.33 2.36 3.61 1.89 0.86 0.75 M8 or 5/16
309-U 1.38 2.52 0.58 1.50 2.47 1.31 0.75 0.12 0.33 0.41 3.53 5.19 2.68 1.28 1.06 3/8-16

Horizontal Clamps
Compact clamps with DE-STA-CO® Toggle Lock Plus
NEW
Flanged base Rivets made of stainless steel
DE-STA-CO introduces our newest family of DE-STA-CO® Toggle Lock Oil-resistant, vinyl dipped handle grip
Plus clamps, featuring a compact locking release lever, which locks
in the clamped position only. All models provided with red vinyl
handle grip and flanged washers. Models 305-UR, 307-UR and
309-UR are supplied with neoprene-tipped spindle assemblies.
Models 305-UR, 307-UR, 309-UR

Holding
Capacity Bar
Opening Standard Flanged
Model no. [lbs.] +10º [lbs.] equipment Washers
305-UR 150 92° 0.13 305208-M 102111

307-UR 350 92° 0.54 307208-M 507107
309-UR 750 92º 1.30 309208 235106
M

Flanged base
305-UR 0.53 1.02 0.25 0.63 1.00 0.48 0.31 0.08 0.18 0.21 1.43 2.21 1.19 0.51 0.50 M5 or #10
307-UR 0.91 1.72 0.40 1.14 1.80 0.89 0.50 0.12 0.28 0.33 2.36 3.61 1.89 0.86 0.75 M8 or 5/16
309-UR 1.38 2.52 0.58 1.50 2.47 1.31 0.75 0.12 0.33 0.41 3.53 5.19 2.68 1.28 1.06 3/8-16

Horizontal Clamps
Models 515, 515-B
Holding
Capacity Bar
Opening
Model no. [lbs.] +10º [lbs.] Standard equipment
515 800 86º 1.07 None

515-B 800 86º 1.75 None D
A1
F1
Solid bar
Block mounting base
B
C1
H
C
L1 A C2
B1
A3
Model 515
Model 515-B
Model no. A A1 A3 B B1 C C1 C2 ØD F1 H L L1
515 – 1.88 – 1.23 0.75 0.87 0.50 – – 0.49 1.69 8.88 2.69
515-B 2.50 3.31 0.31 1.23 1.00 1.12 0.50 0.25 0.34 0.49 1.94 8.88 2.06

Straight-Line Action Clamps
New products
NEW NEW
Models 6001-M and 6001-MSS: Models 95030, 95040, 95050, 95060:
Model 6001 is a heavier duty version of Model 601 and Low profile plunger clamps
has 50% greater holding capacity. It has a more flexible These new low-profile plunger clamps can be used
mounting base to enable side-mounting the clamp. when over-head clearance is a problem. The large
holding capacities for these clamps are packaged in a
small compact design.
page 4.4 page 4.21
NEW NEW
Models 6015-M and 6015-MR: Compact and robust Model 603-MR: With additional safety lock
Model 6015-M is the smallest of the straight-line, The patented design locks the release lever into the
machined-cast base clamps. Its compact size allows it forged steel base to prevent accidental opening.
to be used in confined areas and on small fixtures. The 603-MR is well adapted for use in confined areas
Handles are red vinyl dipped for greater operator comfort. because of its small package size and low height.
page 4.9, 4.10 page 4.12

Straight-Line Action Clamps Product group - straight-line action clamps
Application areas The essential product features
Ideal for clamping during soldering, gluing, locking, assembling, The handle is easy to operate and moves the plunger of the clamp
drilling, testing, positioning and much more. The straight-line action in an out along its axis
clamp range are distinguished by their compact design many versions Most versions lock in the extended and retracted positions
lock in both the extended and retracted positions. They can withstand Clamps can be mounted through drilled holes in the fixture,
relatively high stresses. or using the flanged or straight mounting base
Model 604-MM in a robot-type welding fixture

6001-M 150 Standard 4.4 6015-M 580 Standard 4.9
601 100 Standard 4.5 6015-MR 560 DE-STA-CO® 4.10

601-M 100 Standard Toggle Lock Plus
601-O 100 Standard
602 200 Threaded-body 4.6 603 600 Standard 4.11

602-MM 200 Threaded-body 603-M 600 Standard
604 300 Threaded-body 608 600 Standard
604-MM 300 Threaded-body
624 700 Threaded-body
624-MM 700 Threaded-body
6004 450 Threaded-body 4.7 605 300 Standard 4.11

6004-M 450 Threaded-body 605-M 300 Standard

Product group - straight-line action clamps
603-R 600 DE-STA-CO ®
4.12 620 600 Standard 4.18
603-MR 600 Toggle Lock Plus 620-M 600 Standard
DE-STA-CO® 628 600 Standard
Toggle Lock Plus
606 450 Standard 4.13 630 2,500 Standard 4.19

606-M 450 Standard 630-M 2,500 Standard
640 2,500 Standard
640-M 2,500 Standard
607 800 Standard 4.14 630-R 2,500 DE-STA-CO® 4.19

607-M 800 Standard 630-MR 2,500 Toggle Lock Plus
607-SQ 800 Standard DE-STA-CO®
607-SQM 800 Standard Toggle Lock Plus
609 300 Standard 4.15 650 16,000 Standard 4.20

609-B 300 Standard 650-M 16,000 Standard
610 800 Standard 4.16 95030 550 Standard 4.21

610-M 800 Standard 95040 1,100 Standard
800 Standard 95050 1,650 Standard
95060 3,965 Standard
615 300 Standard 4.16 670-1MB 2,400 Heavy-duty 4.22

670-1MBPLS 2,400 Heavy-duty
675-1MB 2,400 Heavy-duty
690-MB 5,000 Heavy-duty
695-MB 5,000 Heavy-duty
614-M 1,200 Standard 4.17 SL3 150 Heavy-duty 4.24
617 2,000 Standard 4.18

Straight-Line Action Clamps Standard straight-line action clamps
NEW
Application areas Product features
Model 6001-M is a heavier duty version of Model 601 and has 50% Plunger with internal thread
greater holding capacity. It is manufactured from heavy gauge Rivets made of stainless steel
material and has a more flexible mounting base to enable side- Zinc plated and passivated
mounting the clamp. Oil-resistant, vinyl dipped handle grip
Model 6001-M
Holding
Capacity
Plunger Travel
Plunger Recommendation Plunger
Model no. [lbs.] Travel [lbs.] (not supplied) Thread (M) H
øD1
6001-M 150 0.63 0.12 205208-M M4 A6

M
L3 L4 øD2
L2
ALSO AVAILABLE
L
In Stainless Steel Model 6001-MSS Page 8.11
øD
Model locks in both the extended A4 A5
and retracted positions.

Allow handle to fall below plane level B2
to lock in retracted position. B
B1
A3 A
A1
C3
C1
C2
Model no. A A1 A3 A4 A5 A6 B B1 B2 C1 C2 C3 ØD ØD1 ØD2 H L L2 L3 L4
6001-M 0.63 1.54 0.52 0.37 0.43 0.33 0.63 1.23 0.71 0.50 0.12 0.85 0.19 0.28 0.19 1.30 2.63 1.10 0.59 0.16

Standard straight-line action clamps
NEW
Ideal for all applications in which work is performed with holding Oil-resistant, vinyl dipped handle grip
capacities of up to 100 lbs., including gluing, soldering, assembling,
Accessories
drilling, testing, positioning and other processing operations.
Straight-line action clamps are normally delivered without
Product features adjustment spindles. Recommendations are provided.
Flanged mounting base Whenever required, the spindle can be purchased as an
Plunger with internal thread accessory part.
Models 601, 601-M, 601-O

Holding
Capacity
L3
Model no. [lbs.] Travel [lbs.] (not supplied) Thread (M)
H
D3
C3
C1
601 100 0.63 0.09 105203 (supplied) 8-32
L2
D1
C2
601-M 100 0.63 0.09 205208-M M4
601-O (external thread)
601-O 100 0.63 0.13 – 1/4-20
D1
L3
A1 ALSO AVAILABLE
A
A3 As Air/Hydraulic Model 816 Page 11.18
B B1
In Stainless Steel Models 601-OSS, 601-SS, Page 8.10
D
L
Models lock in both the extended
Allow handle to fall below plane level
to lock in retracted position.
Model 601-O Model 601
Model no. A A1 A3 B B1 C1 C2 C3 ØD ØD1 ØD3 H L L2 L3
601 0.63 1.33 0.32 0.63 1.05 0.50 0.09 0.78 0.17 0.25 0.44 1.27 2.62 1.29 0.50
601-M 0.63 1.33 0.32 0.63 1.05 0.50 0.09 0.78 0.17 0.25 0.44 1.27 2.62 1.29 0.50
601-O 0.63 1.33 0.32 0.63 1.05 0.50 0.09 0.78 0.17 0.25 – 1.27 2.86 1.53 0.56

Straight-Line Action Clamps Threaded-body straight-line action clamps
Application areas Plunger with internal thread
Ideal for all applications in which work is performed with holding Rivets made of stainless steel
capacities of up to 700 lbs., including gluing, soldering, assembling, Zinc plated
drilling, testing, positioning, also locking of containers and other Oil-resistant, ergonomically shaped DE-STA-CO
processing operations. handle grip
This series is distinguished by its compact design. The single hole Accessories
threaded mount permits rotation in any direction, allowing complete This series is delivered with a mounting jam nut as standard.
flexibility in the fixture. Adjustment spindles can be ordered as an accessory part.
Product features You will find the matching mounting plate in the table on of
Threaded body for direct installation in mounting plates this page. Please specify the corresponding model number
and fixtures with your order.
Models 602, 602-MM, 604, 604-MM, 624, 624-MM

Holding
Capacity Mounting
Plunger Recommendation Plunger Mounting Plate Nut Standard
Model no. [lbs.] Travel [lbs.] (not supplied) Thread (M) Accessories Equipment
602 200 0.75 0.25 205203 1/4-20 – 602105

602-MM 200 0.75 0.25 205203-M M6 602106-M 602105-M
604 300 1.50 0.44 207203 5/16-18 604106 606104
604-MM 300 1.50 0.44 207203-M M8 604106-M 606104-M
624 700 2.63 1.63 210203 3/8-16 624108 624105
624-MM 700 2.63 1.63 210203-M M10 624106-M 624105-M
ALSO AVAILABLE
In Stainless Steel Models 602-SS, 604-SS Page 8.12
Model 624-SS Page 8.12
Models lock in both the extended L4

Plunger Travel
H
M2
øD1
M1
L3
L2
L1
L
Model no. B2 C1 ØD1 H L L1 L2 L3 L4 M1 M2 SW
602 1.03 0.88 0.37 3.13 2.62 1.31 0.97 0.63 0.25 5/8-18 0.75 0.44
602-MM 1.03 0.88 0.37 3.13 2.62 1.31 0.97 0.63 0.25 M16x1.5 0.75 24mm
SW
604 1.30 0.50 0.44 4.16 4.95 2.18 1.82 1.00 0.25 3/4-16 0.88 1.00
C1
604-MM 1.30 0.50 0.44 4.16 4.95 2.18 1.82 1.00 0.25 M20x1.5 0.88 30mm B2
624 1.81 0.75 0.62 5.60 6.68 3.62 3.24 1.25 0.25 1-14 1.25 1.50
624-MM 1.81 0.75 0.62 5.60 6.68 3.62 3.24 1.25 0.25 M27x2 1.25 41mm

Models 6004, 6004-MM
Holding
Capacity Mounting
Plunger Recommendation Plunger Mounting Plate Nut Standard
Model no. [lbs.] Travel [lbs.] (not supplied) Thread (M) Accessories Equipment
6004 450 1.50 0.81 207203 5/16-18 604106 606104

6004-MM 450 1.50 0.81 207203-M M8 604106-M 606104-M
Models locks in both the extended

L
Plunger Travel
H
L4
øD1
M
C1
L3 L6
L2 L7 L5
SW
M1
B3
B2
Model no. B2 B3 C1 ØD1 H L L2 L3 L4 L5 L6 L7 M1 SW
6004 1.00 0.88 0.44 0.50 4.18 5.78 1.59 1.00 0.25 2.81 0.13 0.75 0.75 1.00
6004-MM 1.00 0.88 0.44 0.50 4.18 5.78 1.59 1.00 0.25 2.81 0.13 0.75 0.75 30mm

Mounting plate for series
602, 604, 624, 6004
For model 602-MM For model 604-MM, 6004-MM For model 604
Order no.: 602106-M Order no.: 604106-M Order no.: 604106
øD1 øD C2
øD1
A5
A6
A5
C1
B1
B
A6
øD B1
B
øD
A1
A3
A1
C2
A3
For model 624-MM For model 624
Order no.: 624106-M Order no.: 624108
øD
øD1
A4
A5
C1
A6
B1
B
C2 øD
A1
A
A3
Order no. For Model no. A A1 A3 A4 A5 A6 B B1 C1 C2 ØD ØD1
602106-M 602-MM – 1.57 0.87 – 1.57 – 1.57 2.36 0.94 0.20 0.26 0.65
604106 604 0.75 1.60 0.57 – 2.07 0.49 1.62 2.80 1.30 0.18 0.22 0.75
604106-M 604-MM, 6004-MM 0.75 1.60 0.57 – 2.07 0.49 1.62 2.80 1.30 0.18 0.22 0.75
624108 624 0.88 1.50 – – – – 2.31 3.00 0.75 0.25 0.28 1-14
624106-M 624-MM 1.26 2.20 0.63 1.26 2.44 0.83 1.77 3.00 1.46 0.20 0.33 1.08

NEW
Model 6015-M is the smallest of the straight-line, machined-cast Plunger with internal thread
base clamps. Its compact size allows it to be used in confined areas Rivets made of stainless steel
and on small fixtures. The plunger is threaded to accept any Casted base, black-oxide finish
M6 clamping spindle. Handles are red vinyl dipped for greater Other parts zinc plated
operator comfort. Oil-resistant, vinyl dipped handle grip
Model 6015-M
Holding
Capacity
Plunger Travel
stroke = 17,8 Plunger Recommendation Plunger
6015-M 580 0.70 0.34 205203-M M6
L2
L ALSO AVAILABLE
As DE-STA-CO® Model 6015-M-R Page 4.9
Toggle Lock Plus
A1
As Stainless Steel Model 6015-M-SS Page 8.13
A3 A
Model locks in both the extended

øD1 M B B1
L3 øD
H
C2
C1
Model no. A A1 A3 B B1 C1 C2 ØD ØD1 H L L2 L3
6015-M 1.75 2.25 0.25 0.88 1.25 0.50 0.20 0.22 0.38 1.60 2.95 0.70 0.75

NEW
Model 6015-M-R is another new addition to our line of DE-STA-CO® Plunger with internal thread
Toggle Lock Plus clamps. Its compact size allows use in confined areas Rivets made of stainless steel
and on small fixtures where safety is a concern. Casted base, black-oxide finish
Other parts zinc plated
Model 6015-MR
Holding
Capacity
Plunger Recommendation Plunger stroke
Plunger=Travel
17,8
6015-MR 560 0.70 0.34 205203-M M6

L2
ALSO AVAILABLE L
DE-STA-CO® Toggle Lock Plus A1
Model locks in both the extended A3 A
and retracted positions, but the

release lever only engages in the
øD1
B1
M
B
extended position.
Allow handle to fall below plane level øD
L3
H
C2
C1
6015-MR 1.75 2.25 0.25 0.88 1.25 0.50 0.20 0.22 0.38 1.60 2.95 0.70 0.75

Models 603, 603-M, 608
Plunger Travel
Holding
Capacity
H
603 600 1.25 0.83 207203 5/16-18
603-M 600 1.25 0.83 207203-M M8
ØD1
M
L3 A5
608 850 1.63 1.25 210203 3/8-16
L2 A6
L
ALSO AVAILABLE
As Air/Hydraulic Model 803 Page 11.17
®
In DE-STA-CO Model 603-R Page 4.11
Toggle Lock Plus
In Stainless Steel Model 603-SS Page 8.12

C1

C2

B1
B

A3 øD to lock in retracted position.
A
A1
Model no. A A1 A3 A5 A6 B B1 C1 C2 ØD ØD1 H L L2 L3
603 1.44 2.00 0.28 0.58 0.94 1.31 1.88 0.97 0.19 0.27 0.44 3.43 4.73 1.22 1.00
603-M 1.44 2.01 0.28 0.62 0.88 1.31 1.89 0.96 0.18 0.26 0.44 3.43 4.80 1.30 1.00
608 1.63 2.25 0.31 0.75 1.40 1.63 2.25 1.25 0.19 0.33 0.62 4.12 6.00 1.60 1.25 Model 603 Model 608

Models 605, 605-M
Plunger Travel Holding
Capacity
H
605 300 1.25 0.69 207203 5/16-18

øD1
M
øD3
C2
L6
605-M 300 1.25 0.69 207203-M M8
L2
L See additional adjustment spindles beginning on page 9.1.

C3
C1

B1
B
L3 øD
A3 A
A1
Model no. A A1 A3 B B1 C1 C2 C3 ØD ØD1 ØD3 H L L2 L3 L6
605 1.38 3.41 0.28 1.63 2.19 0.97 0.12 1.47 0.22 0.44 0.75 3.44 5.48 1.94 1.00 0.10
605-M 1.38 3.41 0.28 1.63 2.19 0.97 0.13 1.47 0.22 0.44 0.69 3.44 5.47 1.94 1.00 0.09

NEW
Patented DE-STA-CO® Toggle Lock Plus design locks the release lever Plunger with internal thread
into the forged steel base to prevent accidental opening. The 603-R is Rivets made of stainless steel
well adapted for use in confined areas because of its small package Forged steel base, black-oxide finish
size and low height. The ergonomic handle is slanted forward to provide Other parts zinc plated and passivated
an adequate grip and yet enhance the low silhouette. Clamp locks in Oil-resistant, ergonomically shaped DE-STA-CO
both the extended and retracted positions while the release lever handle grip
secures the clamp in the extended position only.
Models 603-R, 603-MR

Holding
Capacity
Model no. [lbs.] Travel [lbs.] (not supplied) Thread (M) Plunger
Travel
603-R 600 1.25 0.83 207203 5/16-18
603-MR 600 1.25 0.83 207203-M M8
M
H
C2
C1
DE-STA-CO® Toggle Lock Plus L3
D1
A5
A6
L2
L
B1
B
A3
A
A1
603-R 1.44 2.00 0.28 0.58 0.94 1.31 1.88 0.97 0.19 0.27 0.44 3.43 4.73 1.22 1.00
603-MR 1.44 2.01 0.28 0.62 0.88 1.31 1.89 0.96 0.18 0.26 0.44 3.43 4.80 1.30 1.00

Straight-line action clamps
Ideal for all applications in which work is performed with holding Rivets made of stainless steel
capacities of up to 450 lbs., including gluing, soldering, assembling, Zinc plated
drilling, testing, positioning and other processing operations. Oil-resistant, vinyl dipped handle grip
Due to the flexible design of the plunger and the variable method of Accessories
rotating the handle position, complete flexibility in the fixture design is Straight-line action clamps are normally delivered without
possible. adjustment spindles. Recommendations are provided.
Whenever required, the spindle can be purchased as an
accessory part.
Models 606, 606-M

Holding
Capacity
Plunger Travel
øD1
606 450 1.57 0.81 207203 5/16-18

M
606-M 450 1.57 0.81 207203-M M8

L3 L7 See additional adjustment spindles beginning on page 9.1.
C2
L2
L
Handle and plunger can be rotated in radial direction
for vertical or horizontal handle action.
Models lock in only the extended position.
C3
C1
B1
B
A øD
A3 A1
Model no. A A1 A3 B B1 C1 C2 C3 ØD ØD1 H L L2 L3 L7
606 1.25 2.50 1.07 0.63 1.13 0.88 0.19 1.45 0.20 0.44 2.47 6.72 2.26 1.00 0.69
606-M 1.25 2.50 1.07 0.63 1.13 0.88 0.19 1.45 0.20 0.44 2.47 6.72 2.26 1.00 0.69

Ideal for all applications in which work is performed with holding Zinc plated linkage
capacities of up to 800 lbs., including assembling, drilling, testing, Oil-resistant, ergonomically shaped DE-STA-CO
positioning and other processing operations. handle grip
Product features Accessories
Low-profile plunger Straight-line action clamps are normally delivered without
Round or square plunger with internal thread adjustment spindles. Recommendations are provided.
Forged steel base, black-oxide finish Whenever required, the spindle can be purchased as an
accessory part.
Models 607, 607-M, 607-SQ, 607-SQM

Holding
Capacity
Plunger Recommendation Plunger Plunger Travel
607 800 1.63 1.63 207203 5/16-18
H
C2
607-M 800 1.63 1.63 207203-M M8
C1
607-SQ 800 1.63 1.63 207203 5/16-18 L2
L
607-SQM 800 1.63 1.63 207203-M M8

øD1
M
B1
B
L3 A3 A øD
Allow handle to fall below plane level A2
to lock in retracted position. A1
Model 607-SQ
Feature
Model 607
With square plunger for accurate locating
Model no. A A1 A2 A3 B B1 C1 C2 ØD ØD1 H L L2 L3
607 1.38 4.25 3.01 0.63 1.63 2.19 0.69 0.19 0.28 0.50 3.56 6.01 1.76 1.00
607-M 1.38 4.25 3.01 0.63 1.63 2.19 0.69 0.19 0.28 0.50 3.56 6.01 1.76 1.00
607-SQ 1.38 4.25 3.01 0.63 1.63 2.19 0.69 0.19 0.28 0.50 3.56 6.01 1.76 1.00
607-SQM 1.38 4.25 3.01 0.63 1.63 2.19 0.69 0.19 0.28 0.50 3.56 6.01 1.76 1.00

Application areas
Ideal for all applications in which work is performed with holding
Application areas
capacities of up to 800 lbs., including assembling, drilling, testing,
po si tioning and other processing operations. Product features
Flanged base or straight base
Product features
Rivets made of stainless steel Accessories
Zinc plated linkage
handle grip
Straight and flanged base
Accessories
Straight-line action clamps are normally delivered without
adjustment spindles. Recommendations are provided.
Whenever required, the spindle can be purchased as an
accessory part.
Models 609, 609-B

Holding
Capacity
6.4 Plunger Recommendation Plunger
.25
H Model no. [lbs.] Travel [lbs.] (not supplied) Thread (M)

H
C2
C1
C1 609 300 1.25 0.88 207203 5/16-18
D1 609-B 300 1.25 0.88 207203 5/16-18
609-B B2 609-B
A3
D
B B1
A
A1
Model 609 Model 609-B
Model no. A A1 A3 B B1 B2 C1 C2 ØD ØD1 H
609 1.38 3.58 0.28 1.62 2.19 – 0.97 0.12 0.27 0.44 3.29
609-B 1.38 3.58 0.28 0.24 – 0.93 1.82 – 0.27 0.44 4.14

Models 610, 610-M
Holding
Capacity
610 800 1.63 1.69 210203 3/8-16

610-M 800 1.63 1.69 210203-M M10 D1 L3
H
(610)
See additional adjustment spindles beginning on page 9.1. C1 (610)
M L2

and retracted positions. A6 A1

to lock in retracted position. D
B B1
A3
A
A1
Model 610
Model no. A A1 A3 A6 B B1 C1 C2 ØD ØD1 H H1 H2 L L2 L3
610 1.62 2.25 0.31 1.41 1.62 2.25 1.70 0.25 0.34 0.62 4.55 – – 6.72 2.44 1.25
610-M 1.62 2.25 0.31 1.41 1.62 2.25 1.70 0.25 0.34 0.62 4.55 – – 6.72 2.44 1.25
Model 615
Holding
Capacity
615 300 0.97 0.69 207203 5/16-18 L3
B B1
A3 D
Model locks only in the extended position. A
D1
C3
H
M
L6 C2
C1 L2 A1
Model no. A A1 A3 B B1 C1 C2 C3 ØD ØD1 H L L2 L3 L6
615 1.63 3.53 0.28 1.63 2.19 0.97 0.12 1.47 0.22 0.44 2.35 8.51 1.75 1.00 0.16

High precision, threaded-body straight-line action clamps
NEW
Application areas Front-side external threads for direct installation in
Ideal for all applications in which highly precise clamping is required sheet-metal plates and fixtures
with holding capacities of up to 1,200 lbs., including assembling, Plunger with internal thread
drilling, testing, positioning, locking of containers and other Oil-resistant, ergonomically shaped DE-STA-CO
processing operations. handle grip
This series is distinguished by its compact design. The single hole Accessories
threaded mount permits rotation in any direction, allowing complete Straight-line action clamps are normally delivered without
flexibility in the fixture. adjustment spindles. Recommendations are provided.
Product features Whenever required, the spindle can be purchased as an
Precision model accessory part.
Hardened and polished plunger
Model 614-M
Holding
Capacity Mounting
Plunger Recommendation Plunger Nut Standard
Plunger Travel SW
Model no. [lbs.] Travel [lbs.] (not supplied) Thread (M) Equipment
614-M 1,200 1.25 1.81 207203-M M8 614-1-10

H
SW1 L9
M2

C1
L6
M1
øD
L8
A3
L2 L7 L5
B
B1
L9
M
øD2
øD1
L3
L4
Model no. A3 B B1 C1 ØD ØD1 ØD2 H L2 L3 L4 L5 L6 L7 L8 L9 M1 M2 SW SW1
614-M 0.87 0.94 1.38 0.69 0.22 0.47 0.35 5.81 1.32 0.63 0.79 3.66 0.12 0.75 0.55 0.16 M24 x 1.5 0.98 36 10

Model 617
Holding
Capacity
617 2,000 1.00 0.88 461203 5/16-18
Additional adjustment spindles are listed from page 9.1 forward

L3
Model locks only in the extended positions. H
C1
L2 A1
B1 D1 B2
M
L
Model no. A1 B1 C1 ØD1 H L L3
617 1.75 0.75 1.00 0.50 2.59 7.06 0.85
Models 620, 620-M

Holding
Capacity
620 600 1.11 1.50 210203 3/8-16 D1 D3

L3
620-M 600 1.11 1.50 210203-M M10 H

C1
L2
See additional adjustment spindles beginning on page 9.1. M

A6
6.3
.25
Models lock only in the extended position.
B1 B
D
A3
A1
Model 620-M
Handle and plunger move in opposite directions.
Model no. A A1 A3 A6 B B1 B2 C1 C2 ØD ØD1 ØD3 H H1 H2 L L2 L3
620 1.63 2.25 0.31 1.33 1.63 2.25 – 1.70 0.25 0.34 0.62 1.09 2.26 – – 11.63 1.73 1.00
620-M 1.63 2.25 0.31 1.33 1.63 2.25 – 1.70 0.25 0.34 0.62 1.09 2.26 – – 11.63 1.73 1.00

Models 630, 630-M, 640, 640-M
Holding
Capacity
Plunger Travel Plunger Recommendation Plunger
630 2,500 2.00 1.90 210203 3/8-16
H
C1
630-M 2,500 2.00 1.90 210203-M M10

L2
C2
L
640 7,500 4.00 6.71 220203 1/2-13
640-M 7,500 4.00 6.71 220203-M M12
ALSO AVAILABLE
øD1
M
B1
B
In DE-STA-CO® Toggle Lock Plus Model 630-R Page 4.18
L3 A3 A øD
A2
A1
630 1.38 5.03 3.00 0.50 1.63 2.25 0.81 0.18 0.34 0.62 3.09 7.00 1.97 1.25
630-M 1.38 5.03 3.00 0.50 1.63 2.25 0.81 0.18 0.34 0.62 3.09 7.00 1.97 1.25
640 3.56 8.53 7.12 0.69 2.13 3.00 1.25 0.38 0.41 0.87 4.39 12.66 4.13 2.00
640-M 3.56 8.53 7.12 0.69 2.13 3.00 1.25 0.38 0.41 0.87 4.39 12.66 4.13 2.00
Models 630-R, 630-MR

Holding
Plunger Travel Capacity
H
630-R 2,500 2.00 1.90 210203 3/8-16

630-MR 2,500 2.00 1.90 210203-M M10
C2
C1
L2 See additional adjustment spindles beginning on page 9.1.

L
DE-STA-CO® Toggle Lock Plus version

of models 630, 630-M
Plunger with internal thread
øD
M
Cast base, black-oxide finish

B1
B

L3 A øD
A3 A2
A1
630-R 1.38 5.03 3.00 0.50 1.63 2.25 0.81 0.18 0.34 0.62 3.06 7.00 1.97 1.25
630-MR 1.38 5.03 3.00 0.50 1.63 2.25 0.81 0.18 0.34 0.62 3.06 7.00 1.97 1.25

Application areas Accessories
Ideal for all applications in which work is performed with holding Straight-line action clamps are normally delivered without
capacities of up to 16,000 lbs., including assembling, drilling, adjustment spindles. Recommendations are provided.
testing, positioning and other processing operations. Whenever required, the spindle can be purchased as an
Product features accessory part.
Flanged base
Plunger with internal thread
Forged base, black-oxide finish
Zinc plated
Models 650, 650-M

Holding
Capacity
Plunger Travel
øD1
650 16,000 3.00 5.59 250203 5/8-11
H
C1
650-M 16,000 3.00 5.59 250203-M M16
C2
A3 A
ALSO AVAILABLE
L2 A1
L

øD3
L3
M16
B1
B
øD
R
Model no. A A1 A3 B B1 C1 C2 ØD ØD1 ØD3 H L L2 L3 R
650 2.75 7.81 2.88 2.25 3.25 2.25 0.25 0.41 0.99 1.38 4.87 11.16 3.35 2.00 0.45
650-M 2.75 7.81 2.88 2.25 3.25 2.25 0.25 0.41 0.99 1.38 4.87 11.16 3.35 2.00 0.45

Standard straight-line action clamps, low profile version
NEW
These new low-profile plunger clamps can be used where over- Clamp base cast steel, black-oxide finish
head clearance is a problem. The large holding capacities for Other parts zinc plated and passivated
these clamps are packaged in a small compact design. Supplied with
a metric plunger. Compact, low profile design allows for use
in areas where overhead clearance is a problem.
Models 95030, 95040, 95050, 95060

Holding
Capacity
95030 550 0.98 0.80 205203-M M6

H
PLUNGER
TRAVEL 95040 1,100 1.50 1.60 207203-M M8
C2
C1
95050 1,650 1.97 2.10 220203-M M12
L 95060 3,965 2.36 6.40 220203-M M12

A3 A A

D1 M B B1
L3 D
A1 to lock in retracted position.
Model 95030
Model no. A A1 A3 B B1 C1 C2 ØD ØD1 H L L3
95030 0.98 3.07 0.20 0.98 1.40 0.30 0.48 0.22 0.39 2.28 4.17 0.79
95040 1.38 4.35 0.34 1.38 2.00 0.39 0.72 0.26 0.55 2.82 5.87 0.98
95050 1.77 5.59 0.39 1.77 2.56 0.55 0.94 0.33 0.75 3.21 7.52 1.57
95060 2.17 6.73 0.43 2.17 3.00 0.63 1.08 0.41 0.87 3.55 9.17 1.57

Models 670, 675, 690, 695
The unique feature of these clamps is the collet-type bushing that can be
adjusted to eliminate plunger end movement after long repeated use. The
plunger also has a flat which prevents lateral movement and allows offset
piloting and holding.
The plunger is drilled and tapped for threaded spindles or custom fixturing.
The adjustable pre-load nut (PL) can be used to lock the clamp against itself
when not under pressure and therefore prevent opening when mounted
vertically. The spring hold-open device (S) prevents the clamp from accidentally
closing.
The mounting base (B) is supplied disassembled with the four models, to
enable welding the base and the main assembly in any handle position.
Series 675 and 695 (shorter stroke) reach the over-center position only when
clamping. Series 670 and 690 (longer stroke) lock in both the extended and
56701 retracted position.
Model 670-1MB
Precision clamps for high production
For high accurate repeatability
Adjustable, collet-type bushing minimizes plunger end movement
Pre-load nut and spring hold open devices are optional
Symbols
B – Mounting Base
C – Cover Plate
W
C
M – Metric Version
PL – Pre-Load Lock
56751
M I B II PL S
S – Spring Hold-open Device
Model 675-1MB
W – Welding Range
I – Adjustable Plunger Bushing
II – Plunger Locating Screw
H1
56901
Model 690-1MB
(Handle welded at Welding range H1 Welding range
180˚ as special order) axial radial
0-8 mm 360˚
Before welding, adjust the main assembly on the

mounting base in axial and radial directions.

Models 670, 675, 690, 695
Models 670, 675 Models 690, 695
øD øD3
øD øD3
øD1
øD1
B2 B3
B2 B3
A
A1 A
A1
H
L1
L6
L1
675 L6
Handle H
Position 695
Handle
SW1 Position
C1
L9 C2
C1
L3 C2
A3 B L3
L 670 B1 A3 B
Handle B1
Position L
690
Handle
Position
Plunger
Application
Holding Plunger Plunger Longe Short Mounting Pre-load Hold-open Collet Plunger
Model no. Capacity Weight Travel Thread Stroke Stroke Base Lock Device Brushing Locating Push Pull
670-1MB 2,400 lbs. 4 lbs. 57 M12 x 1.75 Screw
670-1MBPLS 2,400 lbs. 4.2 lbs. 57 M12 x 1.75

675-1MB 2,400 lbs. 3.8 lbs. 28 M12 x 1.75
675-1MBPLS 2,400 lbs. 4 lbs. 28 M12 x 1.75
690-1MB 5,000 lbs. 8 lbs. 76 M16 x 2
690-1MBPLS 5,000 lbs. 8.2 lbs. 76 M16 x 2
695-1MB 5,000 lbs. 7 lbs. 38 M16 x 2
695-1MBPLS 5,000 lbs. 7.2 lbs. 38 M16 x 2
Model no. A A1 A3 B B1 B2 B3 C1 C2 ØD ØD1 ØD3 H L L1 L3 L6 L9 SW1
670-1MB 30 57 6.4 66 89 44.5 35 34.8 12.7 8.4 19 7.8 206 268 75.5 35 0-8 10.3 13H7
670-1MBPLS 30 57 6.4 66 89 44.5 35 34.8 12.7 8.4 19 7.8 206 268 75.5 35 0-8 10.3 13H7
675-1MB 30 57 6.4 66 89 44.5 35 34.8 12.7 8.4 19 7.8 206 195 44.4 35 0-8 10.3 13H7
675-1MBPLS 30 57 6.4 66 89 44.5 35 34.8 12.7 8.4 19 7.8 206 195 44.4 35 0-8 10.3 13H7
690-1MB 50 76.2 9.5 82 102 – 44.4 41.3 12.7 10.5 25 9.8 162 338 85.9 25 0-8 – –
690-1MBPLS 50 76.2 9.5 82 102 – 44.4 41.3 12.7 10.5 25 9.8 162 338 85.9 25 0-8 – –
695-1MB 50 76.2 9.5 82 102 – 44.4 41.3 12.7 10.5 25 9.8 162 240 47.8 25 0-8 – –
695-1MBPLS 50 76.2 9.5 82 102 – 44.4 41.3 12.7 10.5 25 9.8 162 240 47.8 25 0-8 – –

Model SL3
Straight-Line clamps for gluing and fixturing. Toggle action locks the
plunger in the extended position only. Reinforced polymer spindle
assembly with removable neoprene tip is included, or you can fit customized
ends to the threaded plunger.
Non-sparking
Useful in medical and food processing industries
Locking toggle action, push clamping
Spindle assembly included
Constructed of reinforced polymers combining
high strength and lightweight features
Electrically non-conductive
Resistant to acids, gases, chemicals and elevated temperatures
Holding
Capacity
Plunger Plunger
Dia. Model no. [lbs.] Travel [lbs.] Recommendation Thread (M)
SL3 150 2.19 0.25 Supplied 1/4-20
Thread
Handle swings
180º
57002
Model SL3
Model no. A B C D E F G (travel) H J
SL3 2.88 8.00 1.50 2.50 0.28 0.50 2.19 1/4-20 0.75

Variable Stroke Straight-Line Action Clamps
Variable stroke straight-line action
FO Series FL Series
Type of Mounting: Type of Mounting:
Foot mount Flange mount
Type of Actuation: Type of Actuation:
Hand wheel or hand lever Locking lever or hand wheel
(one-handed operation) (one-handed operation)
Locking lever and Plunger Locking lever and Plunger
(two-handed operation) (two-handed operation)
page 5.4 page 5.4
G Series
Type of Mounting:
Through hole mount
Type of Actuation:
Locking lever and Plunger
(two-handed operation)
Hand wheel or hand lever
(one-handed operation)
page 5.4

Variable Stroke Straight-Line Action Clamps Variable stroke straight-line action clamps
Holding Capacity
Part No. max. [lbs] Page Accessories Part no. Page
Flanged base FO-082/40 300 5.4 Plunger 12/100 5.5

FO-120/-- 600 12/200
FO-121/45 600 12/300
FO-122/45 600 16/100
16/200
FO-160/-- 2,000 16/300
FO-161/60 2,000 16/400
FO-162/60 2,000 16/500
FO-220/-- 4,000 22/100
FO-221/80 4,000 22/200
Front flange 22/300
FL-120/-- 600
FL-121/45 600 Swivel thrust pad K508 5.8
FL-122/45 600 K612
K816
FL-160/-- 2,000
K1222
FL-161/60 2,000
FL-162/60 2,000
Threaded mount G-082/40 300

G-120/-- 600 Holding Capacity
Part no. max. [lbs] Page
G-121/45 600
G-122/45 600 F-160 2,000 5.8
FRL-12 5.9.
FRL-16
FRL-20
FRF-12
FRF-16
FRF-2

Variable stroke straight-line action clamps
Two-hand operation One-hand operation

(the plunger and the hand lever (the plunger and handle
are operated separately) lever/hand wheel are operated
simultaneously)
rapid stroke
clamping
stroke
DE-STA-CO‘s variable stroke straight-line clamps are used in The clamping strokes S1 specified in this catalog were measured with
applications where workpiece thicknesses and workpiece tolerances no opposing forces present while measurements were taken. When
vary. These clamps are suitable for clamping between ribs and hollow clamping this product against a workpiece, the clamping stroke S1 is
spaces difficult to reach. reduced by the force-locking connection between the plunger and the
workpiece. The straight-action clamp is unlocked by turning the hand
Compact design and different types of operation allow for application of
lever or the hand wheel counter-clockwise. This method is used for
the straight-line clamps in fixtures for mass production as well as for
both the one-hand and the two-hand operation types. This counter-
single part production.
clockwise rotation makes the conical sleeve (4) and the threaded
Mounting types sleeve (8) or (9) move backward. The pressure spring (7) pushes back
Foot base (FO Series) the relieved ball bearings (5) via the pressure ring (6).
Flange mount (FL Series) The force-locking connection between the slotted clamping
Through hole mount (G Series) sleeve and the plunger can be moved freely again. Straight-line
clamps which are two-hand operated can also be applied to
Type of operation
pull actions when the plunger is inserted in the clamp s
Two hand operation
housing in the opposite direction. On the one hand operated clamp, the
The hand lever (10) and the plunger (1) are separate. The hand lever
rotation inducing the clamping stroke S1 is directly transmitted from
is connected to the clamping mechanism. The plunger can be
the plunger (2) or the hand wheel to the threaded sleeve (9) via a
removed from the clamp
groovespring connection. The clamping and unclamping
One-hand operation operations are executed in the same way as described before.
The hand lever (10) or the hand wheel (11) and the plunger (2) are
linked. The plunger is retained within the clamp. Handling
To change the position of the handle while in the clamped or the
Clamping operation unclamped position, pull the hand lever off its spline (12) and set it in
The plunger (1) or (2) which is guided within the clamp body contacts the the desired position.
workpiece. By rotating the hand lever (10) or the hand wheel (11)
clock-wise the clamping stroke, S1 is engaged and the plunger is Important
tightly gripped by the slotted clamping sleeve (3). The holding forces specified in the catalog refer to the maximum
load exerted on the clamp by counter-forces. For details
Operating principle concerning the clamping force FS exerted on the workpiece by the
The hand lever s (10) clock-wise rotation causes the threaded sleeve clamp and depending on the operation force FB (manual force),
(8) and the conical sleeve (4) to which it is connected to move in the please see the chart on the next page.
direction of the arrow shown in the drawing. The conical sleeve
The clamping force is proportional to the operation force.
produces a force-locking connection between the slotted clamping
The achieved clamping force must not exceed the maximum
sleeve (3) and the plunger by means of the ball bearings (5) located at
holding force.
the clamping sleeve s perimeter.
Due to the force-locking connection, the plunger rotates and As the straight-line clamps, with the exception of the F-160 model,
produces the clamping stroke S1. The plunger s rotation may are designed only for axial load, we recommend to use
be compensated for by means of a swivel hold-down piece. an additional radial support for the plunger in the event of side load.

Model FO-161/60 on a milling machine Model FL-160 with plunger 16/100 on a punching fixture
Different designs
FO Series FL Series G Series

Mounting type: flange base foot mount Mounting type: front flange mount Mounting type: through hole mount
Operating method: one-hand or two- Operating method: one-hand or two- Operating method: one-hand or two-
hand operation hand operation hand operation
Product list and technical data

Mounting type Operating method Model-no. Max. Clamping force FS Rapid stroke Max. Weight
holding with an operating S clamping –
capacity force FB stroke
Two-hand
2)
400 and S1
One-hand One-hand 500 mm
operation
operation operation Plunger order
1)
strokes
separately; see available on
page 5.5 request
Plunger and FB FS
Hand lever Hand wheel
hand lever [lbs.] [lbs.] [lbs.] [mm] [mm] [lbs]
Fot mount FO-082/40 300 100 40 2,5 0.72
FO-120/--1) 600 400 100, 200, 300 3 1.19
FO-121/45 600 400 45 3 1.47
FO-122/45 600 100 45 3 1.34
FO-160/--1) 2,000 500 100, 200, 300 4 2.73
FO-161/160 2,000 500 60 4 3.40
FO-162/60 2,000 150 60 4 3.15
FO-220/--1) 4,000 600 100, 200, 300 4 5.85
FO-221/80 4,000 600 80 4 7.46
Flange mount FL-120/--1) 600 20 400 100, 200, 300 3 1.07
FL-121/45 600 400 45 3 1.34
FL-122/45 600 100 45 3 1.21
FL-160/--1) 2,000 500 100, 200, 300 4 2.49
FL-161/60 2,000 500 60 4 3.15
FL-162/60 2,000 150 60 4 2.92
Through hole mount G-082/40 300 100 40 2,5 0.66
G-120/--1) 600 400 100, 200, 300 3 1.01
G-121/45 600 400 45 3 1.31
G-122/45 600 100 45 3 1.18

Two-hand operation (the plunger and the hand lever are operated separately)
Through hole mount Flange mount Foot mount
*without counter-force
effect
rapid
stroke S
clamping
stroke*
Accessories (order separately)

Part no. G-120/-- View “X” View “Y”
Plunger
Part no. For rapid Weight For
Ø length stroke S ~ [lbs.] clamps
12/100 100 0.30 FO-120

12/200 200 0.62 FL-120
12/300 300 0.82 G-120
16/100 100 0.88
FO-160
16/200 200 1.10
Part no. FL-120/-- Part no. FO-120/-- FL-160
16/300* 300 1.54
22/100 100 2.20
View “X” View “Y” 22/200 200 2.40 FO-220
22/300 300 3.06
Swivel thrust pad

Important Part no. Thread Weight ~ [lbs.]
The straight-line clamps are de K-612 M6 0.02
signed only for axial load. In case K-816 M8 0.03
of side load, we recommend an K-1222 M12 0.08
additonal radial support of the Part no. FO-160/--
plunger. Part no. FL-160/-- FO-220/-- *400 and 500 mm strokes available on request
Part no. Available rapid

without strokes S (order plunger A A1 A2 A3 A4 A8 B B1 B2 Dh8 D1 D2 D3 D4
Mounting type plunger separately) ~ ~ ~ ~
Foot mount
FO-120/-- 100, 200, 300 – 44 19 12 6,3 8,5 52 68 40 12 35 – 6,5 20
FO-160/-- 100, 200, 300 40 62 11 12 12 10 70 90 52 16 46 – 9 25

FO-220/-- 100, 200, 300 50 75 13 20 15 12 90 115 69 22 60 – 11 36
Flange mount
FL-120-- 100, 200, 300 – 44 44 12 6 8,5 52 68 – 12 30f7 40 6,5 20
FL-160-- 100, 200, 300 – 60 – 14 14 10 68 73 – 16 40f7 52 9 25
Through hole mount

G-120/-- 100, 200, 300 – 44 – 12 10 8.5 – – – 12 M30x1,5 40 – 20
Part no. ~L
without D5 D9 D10 E E1 H L with rapid strokes: L1 R S2 S3 SW SW1 T T1 T3
Mounting type plunger ~ ~
100 200 300
Foot mount
FO-120/-- M6 30 6 20 12,5 42 228 328 428 24 95 2,5 2, 5 – 11 12 – 10
FO-160/-- M8 35 8 30 14,8 58 280 380 480 33 130 3 3 13 15 1 14

–
FO-220/-- M12 40 9,5 35 19,5 71 295 395 495 35 197 3 3 17 25 1 18
Flange mount
FL-120/-- M6 30 6 – 12,5 – 228 328 428 24 95 2,5 2,5 – 11 12 – 10
FL-160/-- M8 35 8 28 14,8 – 280 380 480 33 130 3 3 – 13 15 1 14
Through hole mount

G-120/-- M6 30 6 – 12,5 – 228 328 428 24 95 2,5 2, 5 35 11 12 – 12

One-hand operation (the plunger and the hand wheel are operated simultaneously)
effect
rapid
stroke S
clamping
stroke*
Part no. G-082/40 View “X” View “Y”

G-122/45
Part no. FL-122/45 Part no. FO-082/45
View “X” View “Y”

Swivel thrust pad

Important
The straight-line clamps are de Part no. Thread Weight ~ [lbs.]
signed only for axial load. In case K-508 M5 0.01
of side load, we recommend an
K-612 M6 0.02
additonal radial support of the
plunger. Part no. FL-162/60 Part no. FO-162/60
K-816 M8 0.03
K-1222 M12 0.08
Part no.
with
A A1 A2 A3 A4 A5 B B1 B2 Dh8 D1 D2 D3 D4
Mounting type plunger ~ ~ ~ ~
Foot mount FO-082/40 – 37 15,3 10 5 6 44 56 35 8 30 – 4,5 16

FO-122/45 – 44 19 12 6,3 8,5 52 68 40 12 35 6,5 20
FO-162/60 40 62 11 12 12 10 70 90 52 16 46 – 9 25
Flange mount
FL-122/45 – 44 44 12 6 85 52 68 – 12 30f7 40 6,5 20
FL-162/60 – 60 – 14 14 10 68 73 – 16 40f7 52 9 25
Through hole mount

G-082/40 – 37 – 10 8 6 – – – 8 M24x1,5 35 – 16
G-122/45 – 44 – 12 10 8,5 – – – 12 M30x1,5 40 – 20
Part no.
with
D5 D6 D10 E E1 H L L1 S2 S3 SW SW1 T T1 T3
Ø
Foot mount FO-082/40 M5 40 5 18 9,2 36 128 26 9 2,5 – 8 8 – 8
FO-122-45 M6 75 6 20 12,5 42 153 27 15 2,5 – 11 12 – 10
FO-162/60 M8 75 8 30 14.8 58 196 35 18 3 – 13 15 1 14
Flange mount
FL-122/45 M6 52 6 – 12,5 – 153 27 15 2,5 – 11 12 – 10
FL-162/60 M8 75 8 28 14,8 – 196 35 18 3 – 13 15 1 14
Through hole mount

G-082/40 M5 40 5 – 9,2 128 26 9 2,5 30 8 12 – 8
–
G-122/45 M6 52 6 – 12,5 153 27 15 2,5 35 11 12 – 10

One-hand operation (the plunger and the hand lever are operated simultaneously)
effect
rapid
stroke S
clamping
stroke*
Part no. G-121/45 View “X” View “Y”
Part no. FL-121/45 Part no. FO-121/45
View “X” View “Y”
Important Swivel thrust pad

The straight-line clamps are de-
signed only for axial load. In case Part no. Thread Weight ~ [lbs.]
of side load, we recommend an
K-612 M6 0.02
additonal radial support of the
plunger. Part no. FL-161/60 Part no. FO-161/60 K-816 M8 0.03
FO-221/80 K-1222 M12 0.08
Part no.
with
A A1 A2 A3 A4 A5 B B1 B2 Dh8 D1 D2 D3 D4
Mounting type plunger ~ ~ ~
Foot mount
FO-121/45 – 44 19 12 6,3 8,5 52 68 40 12 35 – 6,5 20
FO-161/60 40 62 11 12 12 10 70 90 52 16 46 – 9 25
FO-221/80 50 75 13 20 15 12 90 115 69 22 60 – 11 36
Flange mount
FL-121/45 – 44 44 12 6 8,5 52 68 – 12 30f7 40 6,5 20
FL-161/60 – 60 – 14 14 10 68 73 – 16 40f7 52 9 25
Through hole mount

G-121/45 – 44 – 12 10 8,5 – – – 12 M30x1,5 40 – 20
Part no.
with
D5 D10 E E1 H L L1 R S2 S3 SW SW1 T T1 T3
Ø
Foot mount
FO-121/45 M6 6 20 12,5 42 153 27 95 15 2,5 – 11 12 – 10
FO-162/60 M8 8 30 14,8 58 196 35 130 18 3 – 13 15 1 14

FO-221/80 M12 9,5 35 19,5 71 245 40 197 20 3 – 17 25 1 18
Flange mount
FL-121/45 M6 6 – 12,5 – 153 27 95 15 2,5 – 11 12 – 10
FL-161/60 M8 8 28 14,8 – 196 35 130 18 3 – 13 15 1 14
Through hole mount

G-121/45 M6 6 – 12,5 – 153 27 95 15 2,5 35 11 12 – 10

Technical features
High holding capacity of 2,000 lbs.
High side load capacity
Plunger guide
Wiper ring avoiding contamination of clamping mechanism
Block style base provides for variable mounting
Low weight due to the aluminium housing
50 mm horizontal and vertical hole pattern
Allowable side load FS depending on the

stroke length LH
50 Plunger
40 For rapid Dh8 D5 D9 L T Weight

strokes S ~ ~ ~[lbs.]
Part no.
Side load FS [lbs.]
30 16/100 100 16 M8 35 280 15 0.90

16/200 200 16 M8 35 380 15 1.10
16/300* 300 16 M8 35 480 15 1.54
20
*400 and 500 mm strokes available upon request
10
Swivel thrust pad
5
Weight
Part no A5 D5 D10 E1 T3 SW1
~[lbs.]
K-816 10 M8 8 14,8 14 13 0.08
Stroke length LH [mm]
Clamping stroke,
max. 4mm Rapid
stroke S
Max. ~L
Model no. holding Fs* Weight
For rapid strokes:
without capacity
b1 b2 l1 l2 l3 l4 l5 l6 l7 l8 d1H7 d2h8 d3 d4 d5 R ~
plunger [lbs.] [lbs.] 100 200 300 [lbs.]
F-160/-- 2,000 100 50 68 250 350 451 80 50 18 35 20 2 50 12 10 16 40 8,3 8,5 165 3.30
*Fs = exerting force at an operating force of 20 lbs.

NEW
Models FRF-12, FRF-16, FRF-20, FRL-12, FRL-16

Application areas
Holding
These new quick-acting Ram Lock clamps are ideal for bridging of Capacity
different workpiece thicknesses and can be front or base mounted. Plunger
Each version offers high holding forces and is available in three Model no. [lbs.] Travel [lbs.]
different maximum stroke lengths. The clamp’s unique design allows FRL-12 5,500 0-3 3/8 1.00
“fine” clamping force adjustments once the locking lever FRL-16 11,000 0-5 5/16 1.50
is activated.
FRF-12 5,500 0-3 3/8 1.00
FRF-16 11,000 0-5 5/16 1.50
To operate:
1. Slide spindle bar forward to contact
the workpiece.
stroke 2. Turn the locking lever clockwise to
engage the locking mechanism.
3. Turn knob handle to “fine” to adjust
the clamping force.
4. After operation is finished, turn the
locking lever counter-clockwise to
disengage locking mechanism.
Series FRF
stroke
Series FRF
Series FRL
Series FRL
Model no. A A3 B B1 C1 C2 ØDmm ØD1 L L1
FRL-12 0.79 0.24 1.77 2.17 0.63 0.24 5.5 0.75 6.46 1.69
FRL-16 1.57 0.23 2.09 2.56 0.79 0.31 7.0 0.98 9.25 2.24
FRF-12 1.30 – 1.50 1.97 0.67 0.24 5.5 0.75 6.46 1.69
FRF-16 1.65 – 1.91 2.54 0.87 0.31 7.0 0.98 9.25 2.24

Variable Stroke Straight-Line Action Clamps Notes

Latch Clamps
New products
NEW NEW
Model 3011 Parting Line Clamps:
Models 353-35, 353-65
page 6.5 page 6.19

Latch Clamps Product group – pull action latch clamps
Application areas
Quick closure of covers and flaps on rotating or stationary containers,
drums, boxes and molds. The latch clamp is distinguished by its compact
design and with high holding capacity. The latch hooks can be adjusted
on all models.
New: convenient, patented one-hand operation made
possible by means of a thumb control lever
Compact design
High holding capacities
Model 331 used to lock down the lid of a container

301 375 Standard eyelet 6.4 323 360 Standard horizontal 6.6
311 1,200 Standard eyelet 331 700 Standard horizontal
341 2,000 Standard horizontal
3011 2,000 6.5 331-R 700 DE-STA-CO® 6.8

341-R 2,000 Toggle Lock Plus
DE-STA-CO®
Toggle Lock Plus

Latch Clamps
Product group – pull action latch clamps
375 4,000 Standard horizontal 6..9 324 500 Standard vertical 6.16
334 1,000 Standard vertical
344 2,000 Standard vertical
375-B 4,000 Standard horizontal 6.10 374 4,000 6.18
375-R 4,000 DE-STA-CO® 6.11 353-35 2,800 6.19

Toggle Lock Plus 353-65 2,100
375-BR 4,000 DE-STA-CO® 6.12 330 200 Standard hook 6.20

Toggle Lock Plus 351 375 Standard hook
371 750 Standard hook
381 1,000 Standard hook
385 7,500 Standard horizontal 6.13 351-B 375 Standard horizontal 6.22
385-L 7,500 6.13 351-R 375 DE-STA-CO® 6.23

371-R 750 Toggle Lock Plus
DE-STA-CO®
Toggle Lock Plus
385-R 7,500 DE-STA-CO® 6.14

Toggle Lock Plus
326 8 Rubber latch 6.15

336 12 Rubber latch
346 25 Rubber latch

Latch Clamps Pull action latch clamps – horizontal
These latch-type pull action clamps are equipped with red vinyl
handle for comfortable operation. A fixed stop automatically limits
handle travel at various clamping positions once the clamp is
installed, removing the need to adjust a manual stop. Model 301 has
4" drawing movement and the larger Model 311 has 3 3/8".
Models 301, 311

Holding
Capacity
Model no. [lbs.] [lbs.]
301 375 .70 L

Drawing
311 1,200 1.16 Movement - S
ALSO AVAILABLE
In Stainless Steel Model 301-SS Page 8.20 C
C2
H
L1
B4 B3 B B1
A3
A1
Model no. A A1 A3 B B1 B3 B4 C C2 ØD H L L1 S
301 0.75 1.38 0.32 1.25 1.75 0.80 1.04 1.63 0.12 0.28 1.91 8.40 2.59 4.00
311 1.25 1.91 0.33 1.78 2.53 0.80 1.05 2.06 0.12 0.33 2.50 9.51 3.01 3.38

Latch Clamps
Model 3011
NEW
Information
DE-STA-CO clamp series 3011 is the newest addition to the installation, removing the need to adjust a manual stop. The clamps
rotational mold product offering. As a direct, drop-in replacement for are available in 4130 carbon steel or 316 stainless steel. Model 3011
the legacy 311 clamp, these cast, robust clamps will withstand the is black oxided to help against corrosion. The ergonomic whale-tail
harsh environment of the rotational mold industry. A fixed stop handle provides better operator hand comfort.
automatically limits handle travel at various clamping positions after
Holding
L
Capacity
Drawing
Movement - S
Model no. [lbs.] [lbs.] Drawing Movement
H
3011 2,000 2.00 3.00
C2
C L1
ALSO AVAILABLE
D B
F1 F N
A3
B1
A
A1
Model 3011
Model no. A A1 A3 B B1 C C2 ØD F F1 H L L1 N S
3011 1.25 1.97 0.38 1.78 2.52 1.87 0.24 0.33 0.71 1.42 3.72 9.23 3.04 3.15 3.00

With latch plate and U-shaped hook Product features
Application areas Patented thumb control lever
Ideal for quick closing of covers and flaps on rotating or stationary contain Rivets made of stainless steel
ers, drums, boxes and molds. The models with optional release lever are Zinc plated
preferred where vibration of containers, transportation of boxes and Oil-resistant, ergonomically shaped DE-STA-CO
drums is required. handle grip
Safety instructions Accessories

To ensure a secure form of locking, the clamp must be adjusted into the Clamps are supplied with U-shaped hooks
corresponding over-center toggle position. and latch plate
Models 323, 331, 341

Holding
Capacity
Drawing
movement S L
Model no. [lbs.] [lbs.] Adjustment Range
323 360 0.15 0-0.49
H
323-M-25
C
323-M-50 L2 øD
A3 A
323-M-100
A1
331 700 0.56 0-0.59 L1
331-M-25
331-M-50
C2
331-M-100 B
B1
341 2,000 1.43 0-0.76
M
øD2
341-M-25
B4
341-M-50
B2
B3
341-M-100 A4
A2
A5
ALSO AVAILABLE
®
As DE-STA-CO Model 331-R Page 6.7
Toggle Lock Plus Model 341-R Page 6.7
Model 331-SS Page 8.14 Patented #6,561,556
For added convenience and functionality, every DE-STA-CO pull action clamp
Model 341-SS Page 8.14 is now equipped with a thumb control lever as a standard feature.
Locknut
Thumb
Control
ted
Paten r Control Lever
v e
b Le
Thum 6,561,556
#

Latch Clamps
Con’t Models 323, 331, 341
ted
Paten r Control
v e
b Le
Thum 6,561,556
#
Model no. A A1 A2 A3 A4 A5 B B1 B2 B3 B4 C C2 ØD ØD2 H L L1 max L2 M S

323 0.63 1.02 0.39 0.20 0.24 0.79 0.75 1.10 0.52 0.75 1.06 0.47 0.08 0.17 0.17 1.19 3.91 2.25 0.35 M4 1.81
323-M-25 0.63 1.02 0.39 0.20 0.24 0.79 0.75 1.10 0.52 0.75 1.06 0.47 0.08 0.17 0.17 1.19 4.89 3.23 0.35 M4 1.81
323-M-50 0.63 1.02 0.39 0.20 0.24 0.79 0.75 1.10 0.52 0.75 1.06 0.47 0.08 0.17 0.17 1.19 5.88 4.22 0.35 M4 1.81
323-M-100 0.63 1.02 0.39 0.20 0.24 0.79 0.75 1.10 0.52 0.75 1.06 0.47 0.08 0.17 0.17 1.19 7.85 6.19 0.35 M4 1.81
331 0.75 1.56 0.56 0.26 0.22 1.00 1.25 1.74 0.68 1.00 1.50 0.66 0.12 0.27 0.27 1.97 6.06 3.05 0.50 M5 1.75
331-M-25 0.75 1.56 0.56 0.26 0.22 1.00 1.25 1.74 0.68 1.00 1.50 0.66 0.12 0.27 0.27 1.97 7.04 4.03 0.50 M5 1.75
331-M-50 0.75 1.56 0.56 0.26 0.22 1.00 1.25 1.74 0.68 1.00 1.50 0.66 0.12 0.27 0.27 1.97 8.03 5.02 0.50 M5 1.75
331-M-100 0.75 1.56 0.56 0.26 0.22 1.00 1.25 1.74 0.68 1.00 1.50 0.66 0.12 0.27 0.27 1.97 10.00 6.99 0.50 M5 1.75
341 1.63 2.38 0.75 0.38 0.38 1.50 1.50 2.12 1.19 1.75 2.32 0.94 0.16 0.33 0.33 2.89 8.20 4.59 0.75 M8 2.50
341-M-25 1.63 2.38 0.75 0.38 0.38 1.50 1.50 2.12 1.19 1.75 2.32 0.94 0.16 0.33 0.33 2.89 9.18 5.57 0.75 M8 2.50
341-M-50 1.63 2.38 0.75 0.38 0.38 1.50 1.50 2.12 1.19 1.75 2.32 0.94 0.16 0.33 0.33 2.89 10.17 6.56 0.75 M8 2.50
341-M-100 1.63 2.38 0.75 0.38 0.38 1.50 1.50 2.12 1.19 1.75 2.32 0.94 0.16 0.33 0.33 2.89 12.14 8.53 0.75 M8 2.50

Latch Clamps
Models 331-R, 341-R
Holding
Capacity
Drawing
movement S L
331-R 700 0.56 0-0.59

331-R-M-25
H
331-R-M-50
C
331-R-M-100 L2
C2
C3
341-R 2,000 1.43 0-0.76 A5 A1
L1
341-R-M-25
341-R-M-50
ØD2
B3
M
341-R-M-100
B2
B4
B1
B
ALSO AVAILABLE A4 ØD
A3
In Stainless Steel Model 331-RSS Page 8.15
A2 A
Model 341-RSS Page 8.15
Supplied with DE-STA-CO® Toggle Lock Plus
Patented #6,561,556
is now equipped with a thumb control lever as a standard feature.
ted
Paten r Control
Locknut
v e
b Le
Thum 6,561,556 Thumb
#
Control
Lever
Model no. A A1 A2 A3 A4 A5 B B1 B2 B3 B4 C C2 C3 ØD ØD2 H L L1 max L2 M S

331-R 0.75 1.56 0.56 0.26 0.22 1.00 1.25 1.74 0.68 1.00 1.50 0.66 0.24 0.12 0.27 0.27 2.08 6.06 3.05 0.50 M5 1.75
331-R-M-25 0.75 1.56 0.56 0.26 0.22 1.00 1.25 1.74 0.68 1.00 1.50 0.66 0.24 0.12 0.27 0.27 2.08 7.04 4.03 0.50 M5 1.75
331-R-M-50 0.75 1.56 0.56 0.26 0.22 1.00 1.25 1.74 0.68 1.00 1.50 0.66 0.24 0.12 0.27 0.27 2.08 8.03 5.02 0.50 M5 1.75
331-R-M-100 0.75 1.56 0.56 0.26 0.22 1.00 1.25 1.74 0.68 1.00 1.50 0.66 0.24 0.12 0.27 0.27 2.08 10.00 6.99 0.50 M5 1.75
341-R 1.63 2.38 0.75 0.38 0.38 1.50 1.50 2.12 1.19 1.75 2.32 0.94 0.16 0.16 0.33 0.33 2.89 8.20 4.59 0.75 M8 2.50
341-R-M-25 1.63 2.38 0.75 0.38 0.38 1.50 1.50 2.12 1.19 1.75 2.32 0.94 0.16 0.16 0.33 0.33 2.89 9.18 5.57 0.75 M8 2.50
341-R-M-50 1.63 2.38 0.75 0.38 0.38 1.50 1.50 2.12 1.19 1.75 2.32 0.94 0.16 0.16 0.33 0.33 2.89 10.17 6.56 0.75 M8 2.50
341-R-M-100 1.63 2.38 0.75 0.38 0.38 1.50 1.50 2.12 1.19 1.75 2.32 0.94 0.16 0.16 0.33 0.33 2.89 12.14 8.53 0.75 M8 2.50

Latch Clamps
Model 375
Holding
Capacity

Drawing
L
Movement - S
375 4,000 2.75 0-0.69
L3
375-M-25
375-M-50
H
C3
375-M-100
C
D3 C2 ALSO AVAILABLE
®
As DE-STA-CO Model 375-R Page 6.10
D1
D
M Toggle Lock Plus

B1 B B3
A
A3
A1
ted
Paten r Control
v e
b Le
Thum 6,561,556
Patented #6,561,556 #
Locknut Model 375

Shown with optional
Thumb latch plate (385102)
Control
Lever
Model no. A A1 B B1 B3 C C2 C3 ØD ØD1 ØD3 H L L3 M S
375 2.25 3.44 2.25 3.19 1.75 1.13 0.38 0.13 0.41 0.69 0.39 4.26 10.17 7.45 M10 3.50
375-M-25 2.25 3.44 2.25 3.19 1.75 1.13 0.38 0.13 0.41 0.69 0.39 4.26 11.15 7.45 M10 3.50
375-M-50 2.25 3.44 2.25 3.19 1.75 1.13 0.38 0.13 0.41 0.69 0.39 4.26 12.14 7.45 M10 3.50
375-M-100 2.25 3.44 2.25 3.19 1.75 1.13 0.38 0.13 0.41 0.69 0.39 4.26 14.11 7.45 M10 3.50

Latch Clamps
Model 375-B
Holding
Capacity
Drawing movement 68
S L
260,5
Model no. [lbs.] [lbs.] Adjustment Range L3
192,5
375-B 4,000 2.75 0-0.69

375-B-M-25
105,5
H
375-B-M-50
28,5
C
375-B-M-100 L2
15 A6
22 M
M10
A5
35 A1
71,5
ALSO AVAILABLE
As DE-STA-CO® Model 375-BR Page 6.11
Toggle Lock Plus
44,5
B2
B3
B4
63,5
22
12,7
B1
B5
25,5
Patented #6,561,556
ted
Paten r Control Locknut
e
b Lev
Thum 6,561,556
# Thumb
Control
Lever
Model 375-B
Shown with supplied
latch plate (375509)
Model no. A1 A5 A6 B1 B2 B3 B4 B5 C H L L3 M S
375-B 2.80 1.38 0.87 0.49 0.88 1.75 2.50 1.00 1.13 4.18 10.20 7.48 M10 3.50
375-B-M-25 2.80 1.38 0.87 0.49 0.88 1.75 2.50 1.00 1.13 4.18 11.18 7.48 M10 3.50
375-B-M-50 2.80 1.38 0.87 0.49 0.88 1.75 2.50 1.00 1.13 4.18 12.17 7.48 M10 3.50
375-B-M-100 2.80 1.38 0.87 0.49 0.88 1.75 2.50 1.00 1.13 4.18 14.14 7.48 M10 3.50

Latch Clamps
Pull action latch clamps – horizontal
With latch hook Safety instruction
Application areas Tto ensure a secure form of locking, the clamp must be adjusted into
Ideal for quick closing of covers and flaps on rotating or stationary the corresponding over-center toggle position.
containers, drums, boxes and molds. These clamps offer holding Product features
capacities of up to 7,500 lbs. Patented thumb control lever
The models with release lever are recommended where vibration of Casted base, black oxided
containers, transportation of boxes and drums is present. Zinc plated
handle grip
Accessories
Clamps are supplied complete with latch hooks. Optional latch
plate available (385102).
Model 375-R
Holding
Capacity
L
Drawing
L3
Movement - S
D3 375-R 4,000 2.10 0-0.69

375-R-M-25
H
375-R-M-50
C3
C
375-R-M-100
C2
D1
M
D
B1 B B3
ted
Paten r Control
v e
b Le
A3
Thum 6,561,556
A
A1
#
Model 375-R
Patented #6,561,556
Shown with optional
is now equipped with a thumb control lever as a standard feature. latch plate (385102)
Locknut
Thumb
Control
Lever
Model no. A A1 B B1 B4 C C2 C3 ØD ØD1 ØD3 H L L3 M S
375-R 2.25 3.44 2.25 3.19 1.75 1.13 0.38 0.13 0.41 0.69 0.39 4.26 10.17 7.45 M10 3.50
375-R-M-25 2.25 3.44 2.25 3.19 1.75 1.13 0.38 0.13 0.41 0.69 0.39 4.26 11.15 7.45 M10 3.50
375-R-M-50 2.25 3.44 2.25 3.19 1.75 1.13 0.38 0.13 0.41 0.69 0.39 4.26 12.14 7.45 M10 3.50
375-R-M-100 2.25 3.44 2.25 3.19 1.75 1.13 0.38 0.13 0.41 0.69 0.39 4.26 14.11 7.45 M10 3.50

Latch Clamps
Model 375-BR
Holding
Capacity
Drawing movement67,5
S L
258,5
L3
190,5
375-BR 4,000 2.75 0-0.69
105,5
H
375-BR-M-25
375-BR-M-50 L2
15 A6
22 M
M10
28,5
C
A5
35 A1
71,5
375-BR-M-100
63,5
44,5
24,5
B3
B4
B2
12,7
25,5
B1
B5
ted
Paten r Control
e
b Lev Patented #6,561,556
Thum 6,561,556 For added convenience and functionality, every DE-STA-CO pull action clamp
#
Locknut
Thumb
Control
Model 375-BR
Lever
Shown with supplied
Model no. A1 A5 A6 B1 B2 B3 B4 B5 C H L L3 M S
375-BR 2.80 1.38 0.87 0.49 0.88 1.75 2.50 1.00 1.13 4.18 10.20 7.48 M10 3.50
375-BR-M-25 2.80 1.38 0.87 0.49 0.88 1.75 2.50 1.00 1.13 4.18 11.18 7.48 M10 3.50
375-BR-M-50 2.80 1.38 0.87 0.49 0.88 1.75 2.50 1.00 1.13 4.18 12.17 7.48 M10 3.50
375-BR-M-100 2.80 1.38 0.87 0.49 0.88 1.75 2.50 1.00 1.13 4.18 14.14 7.48 M10 3.50

Latch Clamps
Model 385
Drawing
Movement - S L Holding
L3
Capacity
H
C3
C 385 7,500 3.62 0-1.07

C2
385-M-25
D1 M
D
385-M-50
B1 B B3 385-M-100
A
A3
A1
ALSO AVAILABLE
As DE-STA-CO® Model 385-R Page 6.13

Patented #6,561,556 ted
For added convenience and functionality, every DE-STA-CO pull Paten r Control Toggle Lock Plus
v e
action clamp is now equipped with a thumb control lever as a b Le
standard feature. Thum 6,561,556 As Stainless Steel Model 385-V2A Page 8.15
Locknut #
Thumb
Control Model 385
Lever Shown with optional latch plate (385102)
Model no. A A1 A3 B B1 B3 C C2 C3 ØD ØD1 H L L3 M S
385 2.25 3.44 0.56 2.25 3.19 2.12 1.13 0.38 0.13 0.41 0.69 3.75 10.13 6.44 M12 2.19
385-M-25 2.25 3.44 0.56 2.25 3.19 2.12 1.13 0.38 0.13 0.41 0.69 3.75 11.11 6.44 M12 2.19
385-M-50 2.25 3.44 0.56 2.25 3.19 2.12 1.13 0.38 0.13 0.41 0.69 3.75 12.10 6.44 M12 2.19
385-M-100 2.25 3.44 0.56 2.25 3.19 2.12 1.13 0.38 0.13 0.41 0.69 3.75 14.07 6.44 M12 2.19
Model 385-L
Drawing
Movement - S
L Holding
L3 Capacity
H
H1
C3
C
385-L 7,500 3.62 0-1.07
C2
D D1 385-L-M-25
M
385-L-M-50
B1 B B3 385-L-M-100
Versions in stainless steel beginning on page 8.1

A3 A
ted
A1
Paten r Control
Patented #6,561,556
e v e
bL
For added convenience and functionality, every DE-STA-CO pull action Thum 6,561,556
clamp is now equipped with a thumb control lever as a standard feature. #
Locknut
Model 385-L
Thumb
Shown with optional
Control
Lever latch plate (385102)
Model no. A A1 A3 B B1 B3 C C2 C3 ØD ØD1 H H1 L L3 M S
385-L 2.25 3.44 0.56 2.25 3.19 2.12 1.13 0.38 0.13 0.41 0.69 2.75 1.84 10.13 6.95 M12 2.19
385-L-M-25 2.25 3.44 0.56 2.25 3.19 2.12 1.13 0.38 0.13 0.41 0.69 2.75 1.84 11.11 6.95 M12 2.19
385-L-M-50 2.25 3.44 0.56 2.25 3.19 2.12 1.13 0.38 0.13 0.41 0.69 2.75 1.84 12.10 6.95 M12 2.19
385-L-M-100 2.25 3.44 0.56 2.25 3.19 2.12 1.13 0.38 0.13 0.41 0.69 2.75 1.84 14.07 6.95 M12 2.19

Latch Clamps
Model 385-R
Holding
Capacity
Model no. [lbs.] [lbs.] Adjustment Range Drawing

Movement - S
L
385-R 7,500 3.39 0-1.07 L3
385-R-M-25
385-R-M-50
H
C3
385-R-M-100 C
C2
D1 M
D
B1 B B3
ted
Paten r Control
e v e
bL
Thum 6,561,556
A
A3
# A1
Patented #6,561,556
Model 385-R
Shown with optional Locknut
Thumb
Control
Lever
Model no. A A1 A3 B B1 B3 C C2 C3 ØD ØD1 H L L3 M S
385-R 2.25 3.44 0.56 2.25 3.19 2.12 1.13 0.38 0.13 0.41 0.69 2.75 10.13 6.95 M12 2.19
385-R-M-25 2.25 3.44 0.56 2.25 3.19 2.12 1.13 0.38 0.13 0.41 0.69 2.75 11.11 6.95 M12 2.19
385-R-M-50 2.25 3.44 0.56 2.25 3.19 2.12 1.13 0.38 0.13 0.41 0.69 2.75 12.10 6.95 M12 2.19
385-R-M-100 2.25 3.44 0.56 2.25 3.19 2.12 1.13 0.38 0.13 0.41 0.69 2.75 14.07 6.95 M12 2.19

Latch Clamps
Models 326, 336, 346
Information
Model 326 DE-STA-CO “T” handle rubber latches provide vibration and sound
.14 Dia dampening and compensation for severe misalignment. The latch handle is
made of an ozone resistant synthetic rubber and the base and keeper are
formed of passivated stainless steel. Operation is easy: simply pull on handle
1.88 .92
and stretch to slide bulb of rubber handle into the keeper.
Automatically compensates for misalignment
.50
Dampens vibration
3.22
.47 Dampens sound
Easy to operate
.13 Dia.
Ozone resistant synthetic rubber (EPDM)
Alignment Lug
Durometer 70 ± 5
Stainless steel (passivated) components (302-304SS)
.75
Three models
Low cost
.34 Max. temperature rating 250° F (121° C)
1.25 .63
Model 336
53260
0.20 Dia (4 Holes) Model 326
2.44 1.22
.44
3.74
1.25
LOAD DEFLECTION CHART
.50 1.50
.75 1.50 .88 336
TOTAL ELONGATION (in.)
1.25
326 346
1.00
Model 346 0.75

.20 Dia (4 Holes)
.38 Dia.
0.50
.50 0.25
1.55
0
3.13
0 10 20 30 40 50
LOAD (lbs.)
.69
.75
4.78
1.17 Holding
Model no. EDP no. Capacity Weight
.56
326 53260 8 lbs. 0.07 lbs.
.81 2.00 1.00
336 53360 12 lbs. 0.16 lbs.
346 53460 25 lbs. 0.36 lbs.

Latch Clamps Pull action latch clamps – vertical
With latch plate and U-shaped hook Product features
Ideal for quick clamping for the closure of covers and flaps on rotating Rivets made of stainless steel
or stationary containers, drums, boxes and molds. Holding capacities Zinc plated
of up to 2,000 lbs. Oil-resistant, ergonomically shaped DE-STA-CO
handle grip
Accessories
Clamps are supplied with U-shaped hooks and latch plates.
(except Model 374)
Models 324, 334, 344

Holding M
Capacity
H2
H
H1
C2
324 500 0.25 0-0.50
L1
324-M-25 F
H3
A7
324-M-50
A5
324-M-100
A6
movement S
Drawing
334 1,000 0.60 0-0.80 E
334-M-25
334-M-50
334-M-100
344 2,000 1.50 0-1.26
344-M-25
344-M-50
A4
344-M-100
øD2 A2
ALSO AVAILABLE
B2
In Stainless Steel Models 324-SS. 334-SS Page 8.16 B3
Model 344-SS Page 8.16
Accessories Page 9.1
B1
B4
øD
A3
A
ted
Paten r Control A1
e v e
bL L
Thum 6,561,556
#
Patented #6,561,556
Locknut
Thumb
Control
Lever

Latch Clamps
Con’t Models 324, 334, 344
Model no. A A1 A2 A3 A4 A5 A6 A7 B B1 Max. Mechanical Force Applied to
Model no. Advantage (M.A.) Handle at D
324 0.50 1.00 0.56 0.25 0.28 1.00 0.19 0.19 0.88 1.38
324 31:1 0.250
324-M-25 0.50 1.00 0.56 0.25 0.28 1.00 0.19 0.19 0.88 1.38
334 31:1 0.250
324-M-50 0.50 1.00 0.56 0.25 0.28 1.00 0.19 0.19 0.88 1.38
344 45:1 0.250
324-M-100 0.50 1.00 0.56 0.25 0.28 1.00 0.19 0.19 0.88 1.38
334 0.75 1.31 0.81 0.28 0.41 1.50 0.28 0.28 1.00 1.56
334-M-25 0.75 1.31 0.81 0.28 0.41 1.50 0.28 0.28 1.00 1.56 ted
Paten r Control
334-M-50 0.75 1.31 0.81 0.28 0.41 1.50 0.28 0.28 1.00 1.56 e v e
bL
Thum 6,561,556
334-M-100 0.75 1.31 0.81 0.28 0.41 1.50 0.28 0.28 1.00 1.56 #
344 1.25 1.94 1.06 0.35 0.69 2.13 0.36 0.39 1.44 2.12
344-M-25 1.25 1.94 1.06 0.35 0.69 2.13 0.36 0.39 1.44 2.12
344-M-50 1.25 1.94 1.06 0.35 0.69 2.13 0.36 0.39 1.44 2.12
344-M-100 1.25 1.94 1.06 0.35 0.69 2.13 0.36 0.39 1.44 2.12
Model no. B2 B3 B4 C2 ØD ØD2 H H2 L L1 max M S E F H3 max H1

324 0.53 0.81 1.19 0.09 0.20 0.17 1.89 1.98 3.50 2.56 M4 1.53 0.19 0.22 0.91 1.10
324-M-25 0.53 0.81 1.19 0.09 0.20 0.17 1.89 1.98 3.50 3.54 M4 1.53 0.19 0.22 1.89 1.10
324-M-50 0.53 0.81 1.19 0.09 0.20 0.17 1.89 1.98 3.50 4.53 M4 1.53 0.19 0.22 2.88 1.10
324-M-100 0.53 0.81 1.19 0.09 0.20 0.17 1.89 1.98 3.50 6.50 M4 1.53 0.19 0.22 4.85 1.10
334 0.68 1.13 1.63 0.12 0.28 0.22 2.39 2.69 4.10 3.70 M6 2.00 0.35 0.19 1.35 1.55
334-M-25 0.68 1.13 1.63 0.12 0.28 0.22 2.39 2.69 4.10 4.68 M6 2.00 0.35 0.19 2.33 1.55
334-M-50 0.68 1.13 1.63 0.12 0.28 0.22 2.39 2.69 4.10 5.67 M6 2.00 0.35 0.19 3.32 1.55
334-M-100 0.68 1.13 1.63 0.12 0.28 0.22 2.39 2.69 4.10 7.64 M6 2.00 0.35 0.19 5.29 1.55
344 1.19 1.75 2.38 0.16 0.34 0.34 3.42 3.10 5.78 5.00 M8 2.50 0.50 0.30 1.93 1.86
344-M-25 1.19 1.75 2.38 0.16 0.34 0.34 3.42 3.10 5.78 5.98 M8 2.50 0.50 0.30 1.93 1.86
344-M-50 1.19 1.75 2.38 0.16 0.34 0.34 3.42 3.10 5.78 6.97 M8 2.50 0.50 0.30 1.93 1.86
344-M-100 1.19 1.75 2.38 0.16 0.34 0.34 3.42 3.10 5.78 8.94 M8 2.50 0.50 0.30 1.93 1.86

Latch Clamps Pull action latch clamps – vertical
With U-shaped hook (latch plate sold separately) Base and latch plate cast, black oxided
Ideal for quick closing of covers and flaps on rotating or stationary Partially oil-resistant, ergonomically shaped DE-STA-CO
containers, drums, boxes and molds. These clamps offer a holding handle grip
capacity of 4,000 lbs. Accessories
Product features Latch clamps of this series are delivered complete with
Patented thumb control lever U-shaped hooks (latch plates sold separately).
Model 374
Holding M
H
Capacity
374 4,000 2.10 0-2.03

C2
L1
H3
374-M-25 F A4
374-M-50
A2
A5
374-M-100 A6
D2
B2
Drawing
ted E
Paten r Control
Movement - S
v e
b Le
Thum 6,561,556
#
A3
B4 B3 B B1
A1
Patented #6,561,556
Locknut
Thumb
Control
Optional latch Lever
plate (374107)
Model no. A A1 A2 A3 A4 A5 A6 B B1 B2 B3 B4 C2 ØD ØD2 H L L1 max M S E F H3 max H1
374 1.25 2.41 0.67 0.66 0.39 1.96 0.50 1.50 2.50 1.13 1.75 2.36 0.37 0.41 0.33 2.68 6.23 5.52 M10 1.75 0.58 0.55 2.34 1.42
374-M-25 1.25 2.41 0.67 0.66 0.39 1.96 0.50 1.50 2.50 1.13 1.75 2.36 0.37 0.41 0.33 2.68 6.23 6.50 M10 1.75 0.58 0.55 3.32 1.42
374-M-50 1.25 2.41 0.67 0.66 0.39 1.96 0.50 1.50 2.50 1.13 1.75 2.36 0.37 0.41 0.33 2.68 6.23 7.49 M10 1.75 0.58 0.55 4.31 1.42
374-M-100 1.25 2.41 0.67 0.66 0.39 1.96 0.50 1.50 2.50 1.13 1.75 2.36 0.37 0.41 0.33 2.68 6.23 9.46 M10 1.75 0.58 0.55 6.28 1.42

Latch Clamps
Models 353-35, 353-65
NEW
Information
These robust, heavy-duty cast clamps are designed to withstand the clamp to fit snugly along the radius of the parting line. The ergonomic
harshest environments of the rotational mold industry. They are ideal handle provides greater operator comfort by reducing the stress on the
for clamping directly on the parting lines of CNC machined molds and operator’s hands. Models 353-35 and 353-65 are black oxided to help
are available in carbon or stainless steel. The clamps utilize two reduce corrosion. The clamps are supplied with a tapered M10X1.5 hex
stainless steel pivot pins to help eliminate pivot point binding. The head bolt assembly and keeper plate.
curved radius on the mounting flange and keeper plate allows the
Holding
Capacity
C2 Max. Mechanical
M Model no. [lbs.] [lbs.] Adjustment (M.A.)
N
353-35 2,800 2.10 23:1

353-65 2,100 2.30 27:1
B3
L
H1
D ~H
ALSO AVAILABLE
L1
In Stainless Steel Model 359-35, 359-65 Page 8.22

K B
L3
MAX.
B1
K
MAX.
Keeper plate Tapered bolt assembly

(353004) (353908)
Model no. B B1 B3 C2 ØD ~H H1 K L L1 L3 M N
353-35 1.57 2.20 0.75 0.31 0.27 2.38 1.91 1.39 9.15 1.12 6.50 M10 3.15
353-65 1.57 2.20 0.75 0.31 0.27 2.38 1.91 2.57 10.33 1.12 6.50 M10 3.15

With hook Product features
Ideal for quick closing of covers and flaps on rotating or stationary Rivets made of stainless steel
containers, drums, boxes and molds. These clamps offer holding Zinc plated
capacities of up to 1,000 lbs. Oil-resistant, ergonomically shaped DE-STA-CO
handle grip
The models with additional release lever are recommended where
vibration of containers, transportation of boxes and drums is present.
Safety instruction
To ensure a secure form of locking, the clamp must be adjusted into
the corresponding over-center toggle position.
Models 330, 351, 371, 381

Holding
Capacity
330 200 0.24 0-0.25

L
330-M-25
øD2
330-M-50
H
H1
330-M-100
C
351 375 0.61 0-0.43 L1
C2
Drawing
351-M-25 movement S
351-M-50
351-M-100
371 750 1.53 0-0.81
B1
B
øD
371-M-25
D M
371-M-50
A3
371-M-100 A
381 1,000 2.56 0-0.93 A1
381-M-25
381-M-50
381-M-100
Patented #6,561,556
ted is now equipped with a thumb control lever as a standard feature.
Paten r Control
e v e
bL
Thum 6,561,556 Locknut
Thumb
Control
Lever

Latch Clamps
Con’t Models 330, 351, 371, 381
ALSO AVAILABLE
ted
Paten r Control
As DE-STA-CO® Models 351-R, 371-R Page 6.22 v e
b Le
Toggle Lock Plus Thum 6,561,556
#
In Stainless Steel Model 330-SS, 351-SS Page 8.17
Model 351-BSS Page 8.17
Models 371-SS, 381-SS Page 8.17
Model no. A A1 A3 B B1 C C2 ØD ØD2 H H1 L L1 max M S
330 0.50 1.00 0.25 1.22 1.69 0.56 0.12 0.22 0.32 1.43 0.89 6.04 1.76 M5 2.31
330-M-25 0.50 1.00 0.25 1.22 1.69 0.56 0.12 0.22 0.32 1.43 0.89 7.02 2.74 M5 2.31
330-M-50 0.50 1.00 0.25 1.22 1.69 0.56 0.12 0.22 0.32 1.43 0.89 8.01 3.73 M5 2.31
330-M-100 0.50 1.00 0.25 1.22 1.69 0.56 0.12 0.22 0.32 1.43 0.89 9.98 5.70 M5 2.31
351 0.75 1.50 0.50 1.37 1.93 0.75 0.12 0.22 0.38 1.85 1.35 8.86 2.18 M8 4.00
351-M-25 0.75 1.50 0.50 1.37 1.93 0.75 0.12 0.22 0.38 1.85 1.35 9.04 3.16 M8 4.00
351-M-50 0.75 1.50 0.50 1.37 1.93 0.75 0.12 0.22 0.38 1.85 1.35 10.83 4.15 M8 4.00
351-M-100 0.75 1.50 0.50 1.37 1.93 0.75 0.12 0.22 0.38 1.85 1.35 12.80 6.12 M8 4.00
371 1.25 1.94 0.34 1.94 2.63 1.42 0.16 0.34 0.50 2.38 2.25 11.86 2.81 M10 5.38
371-M-25 1.25 1.94 0.34 1.94 2.63 1.42 0.16 0.34 0.50 2.38 2.25 12.84 3.79 M10 5.38
371-M-50 1.25 1.94 0.34 1.94 2.63 1.42 0.16 0.34 0.50 2.38 2.25 13.83 4.78 M10 5.38
371-M-100 1.25 1.94 0.34 1.94 2.63 1.42 0.16 0.34 0.50 2.38 2.25 16.78 6.75 M10 5.38
381 1.13 2.13 0.50 2.37 3.38 1.81 0.19 0.41 0.62 2.90 2.71 13.45 3.13 M12 6.13
381-M-25 1.13 2.13 0.50 2.37 3.38 1.81 0.19 0.41 0.62 2.90 2.71 14.43 4.11 M12 6.13
381-M-50 1.13 2.13 0.50 2.37 3.38 1.81 0.19 0.41 0.62 2.90 2.71 15.41 5.10 M12 6.13
381-M-100 1.13 2.13 0.50 2.37 3.38 1.81 0.19 0.41 0.62 2.90 2.71 17.39 7.07 M12 6.13

Model 351-B
Latch Clamps
Holding
Capacity

231
L
351-B 375 0.61 0-0.43
351-B-M-25
58
H
38,5
H1
C22
351-B-M-50
øD2
9,5
6,5
A3 ø7
øD
B2 3
351-B-M-100 A
38
71,5 42
L1 51
A1
Drawing movement-S
ted
Paten r Control
e
b Lev
Thum 6,561,556
14,5
M8
M
B
25,5
B4
Patented #6,561,556
Locknut
Thumb
Control
Lever
351-B 1.50 2.00 0.25 0.56 0.95 0.86 0.12 0.27 0.38 1.96 1.46 8.86 1.67 M8 4.00
351-B-M-25 1.50 2.00 0.25 0.56 0.95 0.86 0.12 0.27 0.38 1.96 1.46 9.84 2.65 M8 4.00
351-B-M-50 1.50 2.00 0.25 0.56 0.95 0.86 0.12 0.27 0.38 1.96 1.46 10.83 3.64 M8 4.00
351-B-M-100 1.50 2.00 0.25 0.56 0.95 0.86 0.12 0.27 0.38 1.96 1.46 12.80 5.61 M8 4.00

Latch Clamps
Models 351-R, 371-R
Holding
Capacity
L
C
351-R 375 0.61 0-0.43
H
H1
351-R-M-25
øD2
A6
C2
Drawing movement-S
Spannweg S L1 351-R-M-50
351-R-M-100
371-R 750 1.53 0-0.81
371-R-M-25
B4
B1
B
D M 371-R-M-50
A3
371-R-M-100
A
A1
ted
Paten r Control
Patented #6,561,556
For added convenience and functionality, every DE-STA-CO pull action clamp v e
b Le
is now equipped with a thumb control lever as a standard feature. Thum 6,561,556
Locknut
Thumb
Control
Lever
Model no. A A1 A3 B B1 B4 C C2 ØD ØD2 H H1 L L1max M S
351-R 0.75 1.50 0.50 1.37 1.93 1.71 0.75 0.12 0.22 0.38 1.85 1.42 9.10 2.18 M8 4.00
351-R-M-25 0.75 1.50 0.50 1.37 1.93 1.71 0.75 0.12 0.22 0.38 1.85 1.35 10.08 3.16 M8 4.00
351-R-M-50 0.75 1.50 0.50 1.37 1.93 1.71 0.75 0.12 0.22 0.38 1.85 1.35 11.07 4.15 M8 4.00
351-R-M-100 0.75 1.50 0.50 1.37 1.93 1.71 0.75 0.12 0.22 0.38 1.85 1.35 13.04 6.12 M8 4.00
371-R 1.25 1.94 0.34 1.94 2.63 2.36 1.42 0.16 0.34 0.50 2.38 2.25 12.88 2.83 M10 5.38
371-R-M-25 1.25 1.94 0.34 1.94 2.63 2.36 1.42 0.16 0.34 0.50 2.38 2.25 13.86 3.81 M10 5.38
371-R-M-50 1.25 1.94 0.34 1.94 2.63 2.36 1.42 0.16 0.34 0.50 2.38 2.25 14.85 4.80 M10 5.38
371-R-M-100 1.25 1.94 0.34 1.94 2.63 2.36 1.42 0.16 0.34 0.50 2.38 2.25 16.82 6.77 M10 5.38
Latch clamps 351-R, and 371-R

Information concerning the assembly and function
Pressure spring Locking lever
of the clamps locking mechanism
The locking plate which is supplied with the unit must be fastened
with a screw (M6 or 1/2-20) as shown in this illustration. The screw
head should be flat.
Function
When closing the latch clamp, the locking lever engages
automatically. Actuate the locking lever to open the clamp.
Locking plate

Latch Clamps Notes

Plier Clamps
New products
NEW
Models 425, 435, 445, 470:
For rugged clamping applications
These new high strength squeeze action clamps are ideal
for rugged clamping applications. Clamp strength comes
from the high strength steel that is used. The two-way
trigger release, which is standard, allows for fast and
easy opening of the clamp.
page 7.7

Plier Clamps Product group – squeeze action plier clamps
Application areas The essential product features
In all sectors of industry and manufacturing. Due to the wide Made of drop-forged steel
range of models, DE-STA-CO plier clamps are used wherever Zinc plated
permanent, stationary clamping of workpieces is not possible. In some cases with quick release lever
DE-STA-CO plier clamps are used in all industries. Opening with Oil-resistant, DE-STA-CO vinyl dipped handle grip
the quick release lever makes it very easy to operate these
plier clamps.
Model 453 modified for use in materials testing

325 800 7.4 424 200 Standard 7.6
441 350 Standard
345 800 7.5 424-2 200 Standard 7.6

441-2 350 Standard

Product group – squeeze action plier clamps
Plier Clamps
425 500 NEW! Quick 7.7 468 700 7.11
Release
431 100 7.7 470 2,000 NEW! Quick 7.11

431-2 100 Release
435 500 NEW! Quick 7.8 474 700 7.12

Release
443 500 7.8 480 1,200 Modular 7.12

443-2 500
445 2,000 NEW! Quick 7.9 484 1,200 Quick Release 7.13
Release
462 700 Quick Release 7.9 486 1,000 Quick Release 7.13
482 1,200 Quick Release
462-2 700 7.10
463 700 Quick Release 7.10
*Depends on the clamping arm length

Plier Clamps Squeeze action plier clamps
Designed with dual mounting flexibility. The models listed below can be Rivets made of stainless steel
permantly mounted or used as portable clamps. For example, these Clamp jaw is drop forged for added strength
models are suitable for the locking of containers, flaps, etc. Oil-resistant, ergonomically shaped DE-STA-CO
handle grip
Model 325
Holding Jaw
Capacity Opens M
Jaw opening

325 800 90º 1.18 220203-M L1
K
Versions in stainless steel on page 8.1
F
øD
A3
H
A
L
Feature
Using the existing mounting holes, this model can
also be permantly mounted.
Model no. A A3 B øD F H K L L1 M
325 0.50 0.31 1.06 0.27 0.28 8.11 1.78 2.94 1.25 M12

Model 345
Plier Clamps
Application areas
Designed for welding or bolting to a fixture at any point along
the mounting bar. Can also be used as a portable clamp.
Holding
Capacity Jaw
Opens
Jaw opening
345 800 86° 2.52 468206-M
L1
H
L
B
Model 345
Model no. A B H L L1 M
345 0.75 0.69 10.88 6.56 2.69 M10

Plier Clamps Product group – squeeze action plier clamps
Application areas
These high strength squeeze action clamps are ideal for all
rugged clamping applications. Clamp strength comes from the high-
strength steel that is used.
Models 424, 441

Holding
Capacity
Model no. [lbs.] [lbs.] Standard equipment
424 200 0.31 424208-M (neoprene tipped) L1
K1
K4
K
M
441 350 0.63 441203-M (hex head)
B
L
Model 424 Model 441
Model no. B K K1 K4 L L1 M
424 0.66 1.91 1.00 2.06 4.63 1.08 M6

441 0.50 1.97 1.25 2.86 6.06 1.77 M8
Models 424-2, 441-2

Holding
Capacity
424-2 200 0.31 2x 431208-M (neoprene tipped) L1

K1
K4
441-2 350 0.63 2x 461203-M (hex head) M

B
L
Model 424-2 Model 441-2
424-2 0.66 1.91 1.00 2.06 4.63 1.08 M6

441-2 0.50 1.97 1.25 2.86 6.06 1.77 M8

Plier Clamps
Product group – squeeze action plier clamps
NEW
Model 425
Holding
Capacity
L1
425 500 0.40 205203-M (hex head)

K4 K1 K See additional adjustment spindles beginning on page 9.1
Two-way trigger release allows for fast

M and easy opening of clamp
425 0.39 1.73 1.10 2.56 5.54 1.83 M6
Models 431, 431-2

Holding
Capacity
L1
M
431 100 0.30 424208-M (neoprene tipped)

K4 K1 K
431-2 100 0.30 2x 431208-M (neoprene tipped)
Model 431 Model 431-2
431 0.66 2.12 0.75 3.06 6.90 2.93 M6

431-2 0.66 2.12 0.75 3.06 6.90 2.93 M6

Plier Clamps
Model 435
NEW
Holding
Capacity
L1
435 500 0.50 2x 205203-M K2

K
K4 K1
See additional adjustment spindles beginning on page 9.1. M
Similar to Model 425 but with wider jaw opening
Model no. B K K1 K2 K4 L L1 M
435 0.39 1.72 1.75 0.55 3.23 5.52 1.83 M6
Model 443
Holding
Capacity
Jaw M
Opens
443 500 64° 0.75 441203-M (hex head) K
K1
See additional adjustment spindles beginning page 9.1.
L1
Model 443
Model no. B K K1 L L1 M
443 0.56 2.47 1.39 6.70 1.88 M8

Model 445
Plier Clamps
NEW
L Holding
Capacity
B
L1

445 2,000 1.60 210203-M (hex head)
K4 K1 K
M
K2
K4 K1 K
K2
B
L1
445 0.63 2.00 2.09 4.41 8.27 2.76 M10
Models 462, 482

Holding
M Capacity

K2
K4 K1 K 462 700 1.13 468206-M (swivel foot)
K2
482 1,200 1.75 468206-M (swivel foot)

L1
Model 462/482
462 0.69 2.81 1.75 4.10 8.50 2.72 M10

482 0.69 2.80 1.70 4.06 9.19 2.56 M10

Plier Clamps
Model 462-2
Holding
Capacity L
B
462-2 700 1.13 2x 491203-M (hex head)

M
K2
K4 K1 K
K2
L1
462-2 0.69 2.81 1.75 0.88 4.10 8.50 2.72 M10
Model 463
Holding
Capacity
Model no. [lbs.] [lbs.] Standard equipment L1

K3
463 700 1.19 468206-M

K4
K1
pat. quick-release lever

210203-M M K
K2

B
Model no. B K K1 K2 K3 K4 L L1 M
463 0.69 2.81 3.00 0.88 2.13 4.75 8.50 2.72 M10

Plier Clamps
Model 468
Holding
M
Capacity
468 700 1.00 468206-M (swivel foot)

K4 K1 K
Same as Model 462 except without trigger release

L1
468 0.69 2.66 1.75 4.10 8.47 2.75 M10
Model 470
NEW
Holding
Capacity

K2
K 470 2,000 1.90 2x 210203-M (hex head)
K4 K1
M See additional adjustment spindles beginning on page 9.1.
L1
470 0.63 2.00 3.35 0.91 5.63 8.27 2.76 M10

Plier Clamps
Model 474
Holding
Capacity
M

K2
474 700 1.00 468206-M (swivel foot) K
K4 K1
210203-M (hex head) K3
Same as Model 463 except without trigger release

L1
474 0.69 2.81 3.00 0.86 2.13 4.75 8.50 2.72 M10
Model 480
Holding Capacity
c a. 22°
Model no. [lbs.] [lbs.]
480 1,200 with 2.56 Jaw Extension 1.31

pat. quick-release lever
90°
welding stud
K1
K
B1
B
Typical Application
Model 480
CUSTOM CLAMPING JAWS
Model no. B B1 K K1 L
480 0.63 0.23 2.61 3.75 6.19

Plier Clamps
Model 484
Holding
Capacity

L1
484 1,200 2.00 468206-M (swivel foot)

K3
K4
K1
M pat. quick-release lever 210203-M (hex head)
K
K2

B
484 0.69 2.69 3.83 0.87 2.95 6.00 9.06 2.56 M10
Model 486
Holding
Capacity

K1
486 1,000 2.31 2x 240203-M (hex head)

L1
pat. quick-r elease lever
K4
M
K1
B
486 0.69 2.88 3.00 8.00 9.22 2.56 M10

Plier Clamps Notes

Stainless Steel Clamps
New products
NEW NEW
Model 6001-MSS: 50% higher holding capacity Models 603-MSS, 603-SS in stainless steel
Very compact plunger clamp with the flexibility of The popular 603 plunger clamp is now available in
side mounting. Ideal for use in the electronics industry, stainless steel. This plunger clamp can now be
precision mechanics, food industry and much more. used in applications where the normal zinc plated
version might corrode.
page 8.12 page 8.13
NEW NEW
Model 6015-MSS: Compact clamp in stainless steel Model 3011-SS
Model 6015-MSS is the smallest of the straight-line,
machined-cast base clamps. Its compact size allows it to
be used in confined areas and on small fixtures. Handles
are red vinyl dipped for greater operator comfort.
page 8.14 page 8.21
NEW
Models 359-35, 359-65
page 8.22

Stainless Steel Clamps Product group – stainless steel clamps
Application areas Model 225-USS during service use in the chemical industry
DE-STA-CO toggle clamps made of stainless steel are resistant to
corrosion and chemicals. These clamps are recommended for use in
the chemical and food industries.
Corrosion-resistant and heat-resistant steel
Smooth surfaces without burrs

201-USS 125 Vertical 8.4 213-USS 150 Horizontal 8.9
202-USS 250 Vertical 217-USS 250 Horizontal
202-SS 250 Vertical 8.5 225-UBSS 600 Horizontal 8.10
202-UBSS 250 Vertical 8.6 305-USS 200 Compact 8.10

307-USS 350 Compact
309-USS 750 Compact
205-SSS 75 Horizontal 8.7 601-SS 100 Straight-line 8.11

205-USS 75 Horizontal 601-OSS 100 Straight-line
215-USS 250 Horizontal
206-SS 100 Horizontal 8.8 6001-MSS 150 Straight-line 8.12

206-HSS 100 Horizontal

Product group – stainless steel clamps
603-SS 840 Straight-line 8.13 351-BSS 375 Latch 8.18
603-MSS 840 Straight-line
602-SS 200 Straight-line 8.13 325-SS 800 Squeeze 8.19

604-SS 400
604-MMSS 400
624-SS 700
6015-MSS 630 Straight-line 8.14 301-SS 450 Latch 8.20
323-SS 360 Latch 8.15 3011-SS 2,000 Latch 8.21

331-SS 700 Latch
341-SS 2,000 Latch
331-RSS 700 DE-STA-CO® 8.16 359-35 1,400 Parting Line 8.22

341-RSS 2,000 Toggle Lock Plus 359-65 1,200 Clamp
Latch
DE-STA-CO®
Toggle Lock Plus
Latch
385-V2A 7,500 Latch 8.16
324-SS 500 Latch 8.17

334-SS 1,000 Latch
344-SS 2,000 Latch
330-SS 200 Latch 8.18

351-SS 450 Latch
371-SS 750 Latch
381-SS 1,000 Latch

Stainless steel: vertical clamps
U-shaped clamping bar Product features
Flanged bases Corrosion-resistant and heat-resistant steel
Application areas Smooth surfaces without burrs
DE-STA-CO toggle clamps made of stainless steel are resistant to Rivets made of stainless steel
corrosion and chemicals. These clamps are recommended for use in Oil-resistant, ergonomically shaped DE-STA-CO
the chemical and food industries. handle grip
Accessories
Vertical clamps in stainless steel versions are generally delivered with
standard adjustment spindles made of stainless steel.
Models 201-USS, 202-USS, 207-USS, 210-USS

Holding
Capacity Bar
Opening Flanged
201-USS 125 110º 0.15 201943 102911

202-USS 250 104º 0.35 202943 215905 Opening
207-USS 450 115º 0.70 509907-M 507907
H
210-USS 750 106º 1.29 237943 235906

C1
C2
C
A1
M
B1
B
F
L2
L3 øD
A3
A
L1
L
201-USS 0.63 1.00 .19 0.94 1.31 0.63 0.31 0.08 0.17 0.21 3.03 2.02 1.02 0.13 0.73 M5 or #10
202-USS 0.50 1.00 0.26 1.06 1.56 0.94 0.38 0.12 0.22 0.25 4.21 2.72 1.72 0.51 0.98 M6 or 1/4
207-USS 0.75 1.38 0.31 1.25 1.75 1.25 0.63 0.11 0.28 0.33 5.63 4.41 3.06 0.50 1.96 M8 or 5/16
210-USS 1.25 1.91 0.31 1.78 2.53 1.67 0.79 0.11 0.33 0.40 7.58 5.53 3.63 0.94 2.56 M10 or 3/8

Model 202-SS

Holding
Capacity Bar
Opening Flanged
D Model no. [lbs.] +10º [lbs.] Standard equipment Washers
202-SS 250 104º 0.33 202943 215905

B B1
F1 Additional adjustment spindles are listed from page 9.1 forward.

A3
A
Opening
H
C1
C2
C
A1
L1
Model no. A A1 A3 B B1 C C1 C2 ØD F1 H L L1 L2
202-SS 0.50 1.00 0.25 1.06 1.57 0.95 0.37 0.12 0.22 0.24 4.33 2.31 1.31 1.09

Model 202-UBSS
Holding
Capacity Bar
Opening Flanged
202-UBSS 250 104º 0.35 202943 215905 Opening
C1
C
øD
C3
A3 A
L2 A1
L1
H
C2
B2
M
F
L3
L
Model no. A A1 A3 B2 C C1 C2 C3 ØD F H L L1 L2 L3 M
202-UBSS 0.50 1.00 0.26 0.24 1.13 0.38 0.12 0.12 0.22 0.25 4.40 2.73 1.73 0.51 0.98 M6 or 1/4

Stainless steel: horizontal and compact clamps
U-shaped or fixed clamping bar Product features
Flanged bases Corrosion-resistant and heat-resistant steel
Application areas Smooth surfaces without burrs
DE-STA-CO toggle clamps made of stainless steel are resistant to Rivets made of stainless steel
corrosion and chemicals. These clamps are recommended for use in Oil-resistant, ergonomically shaped DE-STA-CO
the chemical and food industries. handle grip (except for models 205-SSS and 205-USS)
Accessories
Horizontal and compact clamps in stainless steel versions are
generally delivered with standard adjustment spindles made of
stainless steel.
Models 205-SSS, 205-USS, 215-USS, 225-USS, 235-USS

Holding
Capacity Bar
Opening Opening Flanged
205-SSS 75 90º 0.06 205943 105906

205-USS 75 90º 0.06 205943 105906
215-USS 250 90º 0.34 202943 215905
225-USS 600 90º 0.55 207943 507907
235-USS 850 90º 1.47 237943 235906
Model 205-USS Model 205-SSS
Model 215-USS
Model no. A A1 A3 A4 A5 B B1 B3 C C1 C2 F H L L1 M
205-SSS 0.44 0.94 0.16 0.63 0.30 0.62 0.93 0.17 0.37 0.12 0.06 0.17 0.67 2.78 0.88 M4 or 10-32
205-USS 0.44 0.94 0.16 0.63 0.22 0.62 0.93 0.17 0.31 0.26 0.06 0.20 0.67 2.65 0.74 M4 or 10-32
215-USS 1.00 1.44 0.19 1.06 0.43 0.88 1.37 0.20 1.00 0.49 0.10 0.28 1.53 5.50 2.25 M6 or 1/4
225-USS 1.00 1.50 0.25 – 0.49 0.88 1.38 0.30 1.32 0.49 0.12 0.31 1.84 6.70 2.72 M8 or 5/16
235-USS 1.63 2.25 0.37 – 0.69 1.63 2.25 0.34 1.75 0.75 0.16 0.43 2.55 10.87 4.16 M10 or 3/8

Models 206-SS, 206-HSS NEW
Holding
Capacity Bar
Opening Flanged
206-SS 100 90° 0.07 205943 105906 L3 A2 B3
206-HSS 100 90° 0.07 205943 105906 L2
See additional adjustment spindles beginning on page 9.1. F B B1
A4
A3
A
L1 A1
C1
H
C C2
Model 206-SS
Model 206-SS
Model 206-HSS
L2
A2
B3
L3
F
B B1
A3
A4
A
L1 A1
Model 206-HSS
M
C1
H
C
C2
Model no. A A1 A2 A3 A4 B B1 B3 C C1 C2 F H L L1 L2 L3 M
206-SS 0.44 0.94 0.27 0.16 0.53 0.63 0.94 0.17 0.44 0.31 0.05 0.22 1.06 2.75 0.95 0.45 0.35 8-32
206-HSS 0.44 0.94 0.27 0.16 0.53 0.63 0.94 0.17 0.75 0.31 0.05 0.22 1.06 2.75 0.95 0.45 0.35 8-32

Models 213-USS, 217-USS, 227-USS, 237-USS
Holding
Capacity Bar
Opening Flanged
Opening Model no. [lbs.] +10º [lbs.] Standard equipment Washers
213-USS 150 90º 0.17 201943 102911

217-USS 250 92º 0.40 202943 215905
227-USS 600 92º 0.68 207943 507907
237-USS 850 92º 1.60 237943 235906
Model 217-USS – 237-USS
Model no. A A1 A2 A3 A5 A6 B B1 B3 C C1 C2 øD1 F H L L1 L2 L3 M
213-USS 0.53 1.00 0.17 0.24 0.12 – 0.70 1.06 0.06 0.72 0.37 0.08 – 0.22 1.39 4.12 1.42 0.39 0.85 M5 or #8
217-USS 1.03 1.47 0.22 0.22 0.20 0.73 1.19 1.62 0.12 0.97 0.49 0.10 0.19 0.26 1.95 6.56 2.34 0.59 1.50 M6 or 1/4
227-USS 1.03 1.56 0.27 0.28 0.02 0.79 1.22 1.70 0.10 1.30 0.57 0.12 0.19 0.33 2.43 7.56 2.68 0.79 1.52 M8 or 5/16
237-USS 1.63 2.25 0.34 0.31 0.30 1.12 1.69 2.25 0.08 1.62 0.75 0.16 0.23 0.41 3.20 10.67 4.06 0.96 2.75 M10 or 3/8
Safety Distance
Exclusive handle design gives
more hand clearance between bar
and handle when clamp is in fully
open position.

Model 225-UBSS
Holding
Capacity Bar
A5
Opening Flanged Opening
Opening angle
Model no. [lbs.] +10º [lbs.] Standard equipment Washers M
225-UBSS 600 90º 0.55 207943 507907
C1
H
C
A2
B3
A4 A A4
L2 A3
L1 A1
L
Model 205-UB
C2 B2
B2 C2
F
L3
Model no. A A1 A3 A5 B3 C C1 C2 F H L L1 L2 L3 M
225-UBSS 1.00 1.50 0.25 0.49 0.27 1.83 0.49 0.24 0.31 2.38 6.70 2.72 1.08 1.39 M8 or 5/16
Models 305-USS, 307-USS, 309-USS

Holding
Capacity Bar
Opening Flanged
Model no. [lbs.] +10º [lbs.] Standard equipment Washers Opening
305-USS 200 92º 0.13 201943 102911 M
307-USS 350 92º 0.54 207943 507907

C1
309-USS 750 92º 1.30 237943 235906

C

C2
L3
L2
B
B1
F
øD
A3
A
L1 A1
L
305-USS 0.53 1.03 0.26 0.63 1.00 0.50 0.31 0.08 0.18 0.22 1.38 2.22 1.19 0.53 0.50 M5 or #10
307-USS 0.91 1.72 0.41 1.16 1.80 0.87 0.49 0.12 0.28 0.31 2.40 3.60 1.88 0.87 0.80 M8 or 5/16
309-USS 1.38 2.52 0.57 1.50 2.47 1.30 0.75 0.12 0.33 0.41 3.55 5.18 2.66 1.24 1.06 M10 or 3/8

Stainless steel: straight-line action clamps
DE-STA-CO toggle clamps made of stainless steel are resistant to Corrosion-resistant and heat-resistant steel
corrosion and chemicals. These clamps are recommended for use Smooth surfaces without burrs
in the chemical and food industries. Rivets made of stainless steel
plastic handle grip (except for model 601-SS, 601-0SS
and 6001-MSS)
Models 601-SS, 601-OSS

Holding
Capacity
Plunger Plunger
Model no. [lbs.] Travel [lbs.] Standard equipment Thread
L3 601-SS 100 0.63 0.09 205943 8-32
H
D3
C1
C3 601-OSS 100 0.63 0.13 None 1/4-20
L2
D1
C2
Locks in both extended and retracted positions
601-O (external thread)
Allow handle to fall below plane level to lock in retracted position
D1
L3
A1
A
A3
B B1
Model 601-SS
L
Model 601-OSS
Model no. A A1 A3 B B1 C1 C2 C3 ØD ØD1 ØD3 H L L2 L3
601-SS 0.63 1.33 0.32 0.63 1.05 0.50 0.09 0.78 0.17 0.25 0.44 1.27 2.62 1.29 0.50
601-OSS 0.63 1.33 0.32 0.63 1.05 0.50 0.09 0.78 0.17 0.25 – 1.27 2.86 1.53 0.56

Model 6001-MSS
NEW
Holding
Capacity Plunger
Plunger Thread Plunger Travel
Model no. [lbs.] Travel [lbs.] Standard equipment (M) H

øD1
6001-MSS 150 0.63 0.12 102908-M M4 A6
M
L3 L4 øD2
L2
L
øD
A4 A5
B2
B1
B
A3 A
A1
C3
C1
C2
Model no. A A1 A3 A4 A5 A6 B B1 B2 C1 C2 C3 ØD ØD1 ØD2 H L L2 L3 L4
6001-MSS 0.63 1.54 0.52 0.37 0.43 0.33 0.63 1.23 0.71 0.50 0.12 0.85 0.19 0.28 0.19 1.30 2.63 1.10 0.59 0.16

Models 603-SS, 603-MSS
NEW
Holding
Plunger Travel
Capacity Plunger
Plunger Thread
Model no. [lbs.] Travel [lbs.] Standard equipment (M)
H
603-SS 840 1.25 0.83 – 5/16-18
ØD1
M
603-MSS 840 1.25 0.83 509907-M M8

L3 A5
L2 A6
L

C1
C2
B1
B
A3 øD
A
A1
603-SS 1.44 2.00 0.28 0.58 0.94 1.31 1.88 0.97 0.19 0.27 0.47 3.43 4.73 1.22 1.00
603-MSS 1.44 2.01 0.28 0.62 0.88 1.31 1.89 0.96 0.18 0.26 0.47 3.43 4.80 1.30 1.00
Models 602-SS, 604-SS, 604-MMSS, 624-SS

Holding
Capacity Plunger Hex Jam Nut
Plunger Thread (Standard
Plunger Travel Model no. [lbs.] Travel [lbs.] Standard equipment (M) Equipment)
602-SS 200 0.75 0.25 None 1/4-20 602905

604-SS 400 1.50 0.44 None 5/16-18 606904
604-MMSS 400 1.50 0.44 509907-M M8 606904-M
624-SS 700 2.63 1.63 None 3/8-16 624905
Model no. B2 C1 ØD1 H L L1 L2 L3 L4 M1 M2 SW
602-SS 1.03 0.88 0.37 3.13 2.62 1.31 0.97 0.63 0.25 5/8-18 0.75 0.44
604-SS 1.30 0.50 0.44 4.16 4.95 2.18 1.82 1.00 0.25 3/4-16 0.88 1.00
604-MMSS 1.30 0.50 0.44 4.16 4.95 2.18 1.82 1.00 0.25 M20x1.5 0.88 1.00
624-SS 1.81 0.75 0.62 5.60 6.68 3.62 3.24 1.25 0.25 1-14 1.25 1.50

Model 6015-MSS NEW
Holding
Capacity Plunger
Plunger
stroke =Travel
Plunger Thread 17,8
Model no. [lbs.] Travel [lbs.] Standard equipment (M)
6015-MSS 630 0.70 0.34 202916-M M6

L2
See additional adjustment spindles beginning on page 9.1. L

A1
Allow handle to fall below plane level to lock in retracted position A3 A
øD1 M B B1
L3 øD
H
C2
C1
6015-MSS 1.75 2.25 0.25 0.88 1.25 0.50 0.20 0.22 0.38 1.60 2.95 0.70 0.75

Stainless steel: latch clamps
With latch hook Product features
Horizontal version New: with patented thumb control lever
Application areas Corrosion-resistant and heat-resistant steel
DE-STA-CO toggle clamps made of stainless steel are resistant Smooth surfaces without burrs
to corrosion and chemicals. These clamps are recommended for use in Rivets made of stainless steel
the chemical and food industries. Oil-resistant, ergonomically shaped DE-STA-CO
handle grip
In this series, DE-STA-CO® Toggle Lock Plus models with an
additional locking release lever are also available. Secure locking can
be achieved even under strong vibrating conditions.
Models 323-SS, 331-SS, 341-SS

Holding
Capacity
Drawing Drawing
movement S L
Model no. [lbs.] [lbs.] Adjustment Range Movement
323-SS 360 0.15 0-0.49 1.18

H
331-SS 700 0.56 0-0.59 1.75

C
L2 øD 341-SS 2,000 1.43 0-0.76 3.00

A3 A
A1
L1
ALSO AVAILABLE
As DE-STA-CO® Model 331-RSS Page 8.15
Toggle Lock Plus Model 341-RSS Page 8.15

C2
B
B1
ted
Paten r Control
M
øD2
e
b Lev
Thum 6,561,556
B4
B2
B3
#
A4
A2
A5
Patented #6,561,556
Locknut
Thumb
Control
Lever
Model no. A A1 A2 A3 A4 A5 B B1 B2 B3 B4 C C2 ØD ØD2 H L L1 max L2 M S
323-SS 0.63 1.02 0.39 0.20 0.24 0.79 0.75 1.10 0.52 0.75 1.06 0.47 0.08 0.17 0.17 1.19 3.91 2.25 0.35 M4 1.18
331-SS 0.75 1.56 0.56 0.26 0.22 1.00 1.25 1.74 0.68 1.00 1.50 0.66 0.12 0.27 0.27 1.97 6.06 3.05 0.50 M5 1.75
341-SS 1.63 2.38 0.75 0.38 0.38 1.50 1.50 2.12 1.19 1.75 2.32 0.94 0.16 0.33 0.33 2.89 8.20 4.59 0.75 M8 3.00

Models 331-RSS, 341-RSS
Holding Drawing
movement S
Capacity L
Drawing
331-RSS 700 0.56 0-0.59 1.75
H
341-RSS 2,000 1.43 0-0.76 3.00
C
L2
C2
C3
A5 A1
®
DE-STA-CO Toggle Lock Plus L1
ØD2
B3
M
B2
B4
B1
B
A4 ØD
A3
A2 A
Patented #6,561,556
Locknut
Model no. A A1 A2 A3 A4 A5 B B1 B2
331-RSS 0.75 1.56 0.56 0.26 0.22 1.00 1.25 1.74 0.68 Thumb
Control
341-RSS 1.63 2.38 0.75 0.38 0.38 1.50 1.50 2.12 1.19
Lever
Model no. B3 B4 C C2 C3 ØD ØD2 H L L1 max L2 M S
331-RSS 1.00 1.50 0.66 0.24 0.12 0.27 0.27 2.08 6.06 3.05 0.50 M5 1.75
341-RSS 1.75 2.32 0.94 0.16 0.16 0.33 0.33 2.89 8.20 4.59 0.75 M8 3.00
Model 385-V2A
NEW
Holding
Capacity
Drawing movement-S L
Model no. [lbs.] [lbs.] Adjustment Range L3
385-V2A 6,000 3.62 0-1.07

C
H
C3
C2
B1
B3
Patented #6,561,556
B
For added convenience and functionality, every DE-STA-CO pull action

clamp is now equipped with a thumb control lever as a standard feature. øD A3 A M
øD1 A1
Locknut
A4 A2
A5
Thumb
Control
Lever
Model no. A A1 A2 A3 A4 A5 B B1 B3 C C2 C3 ØD ØD1 H L L3 M S
385-V2A 2.24 3.39 1.38 0.57 0.45 2.28 2.24 3.15 2.13 1.24 0.39 0.16 0.43 0.67 3.66 10.59 7.336 M12 1.81

Models 324-SS, 334-SS, 344-SS
Holding
Capacity
M Drawing
324-SS 500 0.25 0-0.50 1.53
H2
H
H1
334-SS 1,000 0.60 0-0.80 2.00
C2
L1
F 344-SS 2,000 1.50 0-1.26 2.50
H3
A7
A5
A6
movement S
Drawing
ted
Paten r Control
e
b Lev
Thum 6,561,556
#
A4
A2
Patented #6,561,556
øD2
For added convenience and functionality, every DE-STA-CO
B2 pull action clamp is now equipped with a thumb control
B3 lever as a standard feature.
Locknut
Thumb
B1
B4
Control
øD Lever
A3
A
A1
Model no. A A1 A2 A3 A4 A5 A6 A7 B
L
324-SS 0.50 1.00 0.56 0.25 0.28 1.00 0.19 0.19 0.88
334-SS 0.75 1.31 0.81 0.28 0.41 1.50 0.28 0.28 1.00
344-SS 1.25 1.94 1.06 0.35 0.69 2.13 0.36 0.39 1.44
Model no. B1 B2 B3 B4 C2 ØD ØD2 H H2 L L1 max M S E F H3 max H1
324-SS 1.38 0.53 0.81 1.19 0.09 0.20 0.17 1.89 1.98 3.50 2.56 M4 1.53 0.19 0.22 0.91 1.10
334-SS 1.56 0.68 1.13 1.63 0.12 0.28 0.22 2.39 2.69 4.10 3.70 M6 2.00 0.35 0.19 1.35 1.55
344-SS 2.12 1.19 1.75 2.38 0.16 0.34 0.34 3.42 3.10 5.78 5.00 M8 2.50 0.50 0.30 1.93 1.86

Models 330-SS, 351-SS, 371-SS, 381-SS
Holding
Capacity
Drawing
330-SS 200 0.24 0-0.25 2.31

L
351-SS 450 0.61 0-0.43 4.00
øD2
371-SS 750 1.53 0-0.81 5.38
H
H1
381-SS 1,000 2.56 0-0.93 2.56
C
L1
C2
Drawing
movement S
Patented #6,561,556
B1
B
ted For added convenience and functionality, every DE-STA-CO pull action
Paten r Control clamp is now equipped with a thumb control lever as a standard feature.
e
b Lev D M
Thum 6,561,556 A3
# Locknut
A
A1
Thumb
Control
Lever
330-SS 0.50 1.00 0.25 1.22 1.69 0.56 0.12 0.22 0.32 1.43 0.89 6.04 1.76 M5 2.31
351-SS 0.75 1.50 0.50 1.37 1.93 0.75 0.12 0.22 0.38 1.85 1.35 8.86 2.18 M8 4.00
371-SS 1.25 1.94 0.34 1.94 2.63 1.42 0.16 0.34 0.50 2.38 2.25 11.86 2.81 M10 5.38
381-SS 1.13 2.13 0.50 2.37 3.38 1.81 0.19 0.41 0.62 2.90 2.71 13.45 3.13 M12 6.13
Model 351-BSS
Holding
Capacity
Drawing
L
øD2
351-BSS 375 0.61 0-0.43 4.00 H

H1
C
L1
C2
Drawing
movement S
ted
Paten r Control
e v e
bL
Thum 6,561,556
B1
B
Patented #6,561,556
# For added convenience and functionality, every DE-STA-CO pull
action clamp is now equipped with a thumb control lever as a
D M
standard feature.
A3
Locknut
A
A1
Thumb
Control
Lever
351-BSS 1.50 2.00 0.25 0.95 0.56 0.86 0.12 0.27 0.38 1.96 1.46 8.86 1.67 M8 4.00

Model 325-SS
Holding
M
Capacity Jaw
Jaw opening
Opens
L1 325-SS 800 90º 1.18 325943
K
See additional adjustment spindles beginning on page page 9.1.

F
øD
A3
H
A
L
Model no. A A3 B øD F H K L L1 M
325-SS 0.50 0.31 1.06 0.27 0.28 8.31 1.78 2.94 1.25 M12

Stainless Steel Clamps Stainless Steel: latch clamps
U-shaped and hook style Product features
Application areas Corrosion-resistant and heat-resistant steel
DE-STA-CO toggle clamps made of stainless steel are resistant to Smooth surfaces without burrs
corrosion and chemicals. These clamps are recommended for use in Rivets made of stainless steel
the chemical and food industries. Oil-resistant, ergonomically shaped DE-STA-CO
handle grip
Model 301-SS
Holding
Capacity
Model no. [lbs.] [lbs.] Drawing Movement
301-SS 450 0.70 4.00 L

Drawing
Movement - S
H
C
C2
L1
B4 B3 B B1
A3
A1
Model no. A A1 A3 B B1 B3 B4 C C2 ØD H L L1 S
301-SS 0.75 1.38 0.31 1.25 1.75 0.83 1.08 1.63 0.12 0.28 1.91 8.40 2.58 4.00

Model 3011-SS
Information
DE-STA-CO clamp series 3011 is the newest addition to the rotational limits handle travel at various clamping positions after installation,
mold product offering. As a direct, drop-in replacement for the legacy removing the need to adjust a manual stop. The clamps are available in
311 clamp, these cast, robust clamps will withstand the harsh 4130 carbon steel or 316 stainless steel. The vinyl dipped ergonomic
environment of the rotational mold industry. A fixed stop automatically whale-tail handle provides better operator hand comfort.
Holding
Capacity
L Model no. [lbs.] [lbs.] Drawing Movement

Drawing
Movement - S 3011-S 2,000 2.00 3.00
C2
C L1
D B
F1 F N
A3
B1
A
A1
Model no. A A1 A3 B B1 C C2 ØD F F1 H L L1 N S
3011-SS 1.25 1.97 0.38 1.78 2.52 1.87 0.24 0.33 0.71 1.42 3.72 9.23 3.04 3.15 3.00

Models 359-35, 359-65
Information
These robust, heavy-duty cast clamps are designed to withstand the radius on the mounting flange and keeper plate allows the clamp to fit
harshest environments of the rotational mold industry. They are ideal for snugly along the radius of the parting line. The ergonomic handle
clamping directly on the parting lines of CNC machined molds and are provides greater operator comfort by reducing the stress on the
available in carbon or stainless steel. The clamps utilize two operator’s hands. The clamps are supplied with a tapered M10x1.5 hex
stainless steel pivot pins to help eliminate pivot point binding. The curved head bolt assembly and keeper plate.
Holding
Capacity
Max. Mechanical
Model no. [lbs.] [lbs.] Adjustment (M.A.)
359-35 1,400 2.10 23:1 C2
359-65 1,200 2.30 27:1 N
B3
L
H1
D ~H
L1
K B
L3
MAX.
B1
K
MAX.
Keeper plate Tapered bolt assembly

(353904) (353908)
Model no. B B1 B3 C2 ØD ~H H1 K L L1 L3 M N
359-35 1.57 2.20 0.75 0.31 0.27 2.38 1.91 1.39 9.15 1.12 6.50 M10 3.15
359-65 1.57 2.20 0.75 0.31 0.27 2.38 1.91 2.57 10.33 1.12 6.50 M10 3.15

Manual Accessories
Manual clamp accessories

Manual Accessories
Accessories
Flat-tip Bonded Neoprene Cap* Part no. EDP no. L L1 D Thread (G)
201208 59816 1.38 1.00 0.56 10-32
202208 59803 1.63 1.08 0.66 1/4-20
215208 59805 2.13 1.57 0.66 1/4-20
G
L1 225208 59807 2.25 1.50 0.75 5/16-18
L
507208 59812 3.00 2.25 0.75 5/16-18
240208 59809 3.25 2.25 0.88 3/8-16
527208 59815 3.50 2.50 0.88 3/8-16
235208 59808 5.75 4.75 0.88 3/8-16
247208 59820 4.00 2.69 1.13 1/2-13
267208 59821 5.00 3.63 1.38 5/8-11
D
105208 59802 1.00 0.64 0.56 8-32
102208 59801 1.25 0.88 0.56 8-32
431208 59811 1.00 0.63 0.66 1/4-20
424208 59810 1.50 1.13 0.66 1/4-20
Flat-tip Bonded Neoprene Cap Part no. EDP no. L L1 D Thread (G) Wrench
(METRIC)**
202208-M 59825 44 1.73 30 1.18 16 0.63 M6 x 1.00 10 mm
215208-M 59827 54 2.13 40 1.57 16 0.63 M6 x 1.00 10 mm
G
225208-M 59828 53 2.09 35 1.38 21 0.83 M8 x 1.25 13 mm
L1 235208-M 59829 120 4.72 95 3.74 26 1.02 M10 x 1.50 15 mm
240208-M 59830 79 3.11 55 2.17 26 1.02 M10 x 1.50 15 mm
L
247208-M 59835 97 3.82 68 2.68 30 1.18 M12 x 1.75 15 mm
507208-M 59831 83 3.27 65 2.56 21 0.83 M8 x 1.25 13 mm
NEW 424208-M* 59832 38.1 1.50 28.7 1.13 16.8 0.66 M6 x 1.00 10 mm
NEW 431208-M* 59833 25 1.00 16 0.63 22.3 0.88 M6 x 1.00 10 mm
D 2007208-M 59840 63 2.47 45 1.77 21 0.83 M8 x 1.25 13 mm
G
Part no. EDP no. L L1 D Thread (G) Wrench
L1
NEW 201208-M 59824 32 1.26 29.2 1.15 8 0.31 M4 x 0.7 7 mm
L
NEW 205208-M 59836 22 0.87 19.2 0.76 8 0.31 M4 x 0.7 7 mm
NEW 213208-M 59837 34 1.34 29 1.14 10 0.39 M5 x 0.8 8 mm
NEW 305208-M 59838 29 1.14 24 0.94 10 0.39 M5 x 0.8 8 mm
NEW 307208-M 59839 43 1.69 34 1.34 19 0.75 M8 x 1.25 13 mm
D
Cone-tip Bonded Neoprene Cap* Part no. EDP no. L L1 D Thread (G)
305208 59817 1.50 1.00 0.56 10-32
213208 59819 2.25 1.56 0.75 1/4-20
509208 59813 3.00 2.25 0.75 5/16-18
L1
G 519208 59814 5.38 4.75 0.75 5/16-18
L 220208 59806 2.88 2.00 0.88 3/8-16
210208 59804 3.44 2.50 0.88 3/8-16
* These spindle assemblies are made from cold-drawn bar (Grade 2) and zinc plated. The spindle tip is bonded using oil resistant black neoprene with a
durometer of 70-80 Shore A, to provide adequate compressibility and resiliency. The normal operating range for these assemblies is –40º F to 220º F.
** These spindle assemblies are made from cold-drawn bar (Grade 2 minimum) and zinc plated. The spindle tip is bonded using oil resistant red neoprene
with a durometer of 80-85 Shore A. The normal operating range for these assemblies is –4º F to 212º F.
Note: Stainless steel bonded neoprene spindle assemblies are available upon request.

Manual Accessories
Accessories
Large Diameter swivel padded spindle (white neoprene pad)
Part no. EDP no. L L1 D E Thread (G) Swivel Angle
207209 59401 2.57 1.56 1.00 0.31 1/4-20 14º

L1 507209 59402 2.98 1.94 1.50 0.31 5/16-18 14º
G 210209 59403 3.63 2.44 2.00 0.31 3/8-16 14º
L
Padded swivel foot is bonded using oil resistant white neoprene

with a durometer of 70-80, to provide adequate compressibility
and resiliency. Normal operating is - 40°F to 220°F.
Swivel Foot Part no. EDP no. L L1 D Thread (G) Swivel Angle
207206 59601 2.38 1.99 0.50 1/4-20 10º

507206 59605 2.75 1.94 0.56 5/16-18 14º
G 468206* 59604 3.06 1.92 0.63 3/8-16 13º
L1 468206-AL* 59606 3.00 2.00 0.63 3/8-16 13º
L 210206 59602 3.38 2.44 0.63 3/8-16 13º
250206 59603 4.63 3.44 1.00 1/2-13 13º
NEW
468206-M 59607 3.00 2.00 0.63 M10 13º
* Knurl on end of thread
Available upon request, as are a number of other modications

D Part No.
468206
Hex-Head – fully threaded Part no. EDP no. L L1 D Thread (G)

stainless steel
205943 59321 0.86 0.75 1/4 8-32
213943 59322 1.13 1.03 1/4 8-32
201943 59323 1.13 1.03 5/16 10-32
G 202943 59324 1.50 1.38 7/16 1/4-20
207943 59326 2.50 2.31 1/2 5/16-18
L L1 237943 59327 2.77 2.25 9/16 3/8-16
245943 59328 3.00 2.75 3/4 1/2-13
207943-M 59860 2.77 2.56 13mm M8 x 1.25
237943-M 59861 3.00 2.76 17mm M10 x 1.50
D

Manual Accessories
Accessories
Hex-Head – fully threaded Aluminum Part no. EDP no. L L1 D Thread (G)
441203-AL 59341 1.75 1.50 1/2 5/16-18
G
491203-AL 59342 1.50 1.25 9/16 3/8-16
485203-AL 59344 2.75 2.50 9/16 3/8-16
L L1 486203-AL 59345 4.00 3.75 9/16 3/8-16
Available upon request, as are a number of other modications
Hex-Head – fully threaded carbon steel Part no. EDP no. L L1 D Thread (G)
105203 59301 0.86 0.75 1/4 8/32 Nylon
305203 59313 1.09 1.00 5/16 10-32
G
202203 59303 3.13 3.00 7/16 1/4-20
L1
205203 59302 1.88 1.69 7/16 1/4-20
L
461203 59314 1.00 0.84 1/2 5/16-18
441203 59312 1.94 1.75 1/2 5/16-18
207203 59304 2.75 2.50 1/2 5/16-18
D
491203 59315 1.50 1.25 9/16 3/8-16
210203 59305 3.00 2.75 9/16 3/8-16
240203 59307 4.25 4.00 9/16 3/8-16
527203 59316 5.25 5.00 9/16 3/8-16
325203 59317 2.84 2.50 3/4 1/2-13
220203 59306 3.31 3.00 3/4 1/2-13
250203 59308 4.38 4.00 15/16 5/8-11
Hex-Head – fully threaded Part no. EDP no. L L1 D Thread (G)

carbon steel (METRIC)
210203-M 59309 3.03 2.76 16 mm M10
240203-M 59310 4.25 4.00 16 mm M10
G
441203-M 59311 19.4 1.75 13 mm M8
461203-M 59318 1.00 0.81 13 mm M8
L L1 491203-M 59319 1.50 1.25 16 mm M10
205203-M 59329 1.93 1.77 10 mm M6
207203-M 59330 2.97 2.76 13 mm M8
D
267203-M 59859 5.12 4.72 24mm M16 x 2.0
Plunger-matic Assemblies Thread Max. Max.

Part no. EDP no. L L1 D S (G) Comp Pres.
G
L1
Part No. 905 59050 2.50 0.75 0.88 0.19 5/16-18 0.19" 135 lbs.
905 920 59200 3.63 1.13 0.88 0.38 3/8-16 0.38" 308 lbs.
L
For use with plunger/straight-line action clamps. The compression spring

allows the clamp to compensate for variations in material thickness.
S
Clamp capacity is only as great as the maximum spring pressure.
D

Manual Accessories
Accessories
Neoprene Caps For Spindle
Slip on the heads of hex-head spindles. Part no. EDP no. D d H Diamater
Durometer: 60-70. 215119 59102 0.63 0.25 0.44 1/4
Normal operating range: -40º F to 220º F. 225119 59103 0.75 0.31 0.50 5/16
235119 59105 0.88 0.38 0.53 3/8
Special Neoprene Caps For Spindle

Slip on threaded spindle rod. Part no. EDP no. D d H Diamater
424107 59106 0.44 0.22 0.44 7/32
d
235110 59104 0.72 0.34 0.88 11/32
Polyurethane Caps For Spindle

Flat-tip, internally threaded to screw Part no. EDP no. D D1 L1 L2 Diamater
onto spindle end. Durometer: 80. 215219 59110 0.81 0.50 0.69 0.50 1/4
Normal operating range: -90º F to 200º F. 225219 59111 0.81 0.50 0.69 0.50 5/16
235219 59112 0.81 0.63 0.88 0.63 3/8
L2
L1
D1
Polyurethane Caps Point For Spindle

Cone-tip, internally threaded Part no. EDP no. D L1 L2 Angle Diamater
to screw onto spindle end. 215319 59113 0.81 0.75 0.50 90º 1/4
225319 59114 0.81 0.75 0.50 90º 5/16
235319 59115 0.81 0.94 0.63 90º 3/8
D
L2
L1

Manual Accessories
Accessories
Bolt Retainers – Part no. EDP no. A B F1 d For Spindle
For clamps with “S” solid hold-down bars.
207105 59850 1.25 0.63 0.25 0.33 5/16, M8
210114 59851 1.50 0.75 0.31 0.53 3/8, M10
d F1 247110 59852 1.63 0.88 0.38 0.56 1/2, M12
110122 59853 1.88 1.25 0.38 0.64 5/8, M16
250121 59854 1.88 1.00 0.38 0.64 1/2, M12
2002115-E 59856 0.97 0.50 0.23 0.26 1/4, M6
B
2007115-E 59857 1.26 0.75 0.23 0.34 5/16, M8
2010115-E 59858 1.58 1.13 0.32 0.41 3/8, M10
A
Flanged Washers – Part no. EDP no. D d F2 For Spindle

For “U” bar clamps – Carbon Steel.
105106 59122 0.44 0.17 0.33 No. 8, M4
d 102111 59121 0.56 0.20 0.38 No. 10, M5
215105 59123 0.69 0.27 0.50 1/4, M6
507107 59125 0.88 0.33 0.60 5/16, M8
235106 59124 1.00 0.41 0.75 3/8, M10
247109 59126 1.25 0.53 0.91 1/2, M12
F2 267102 59127 1.44 0.66 1.03 5/8, M16
Flanged Washers – Part no. EDP no. D d F2 For Spindle

For “U” bar clamps – Stainless Steel.
105906 59131 0.44 0.17 0.33 No. 8, M4
d 102911 59132 0.56 0.20 0.38 No. 10, M5
215905 59133 0.69 0.27 0.50 1/4, M6
507907 59134 0.88 0.33 0.60 5/16, M8
235906 59135 1.00 0.41 0.75 3/8, M10
247909 59136 1.25 0.53 0.91 1/2, M12
F2

CARVER Clamps
Applications
A single Carver Carver Model

Model T500-1 T285-18 “C”
moving head, style clamp used
and two T500-2, in a drilling
fixed head Edge operation.
Grip clamps hold
a part for milling.
Two low-profile Two Carver

T500 Carver Edge Model T614-0
Grip clamps apply clamps secure
both horizontal a part fixture
and vertical during a drilling
clamping force to application.
secure parts for a
milling operation.
This double action
is beyond the
capabilities of
machine vises.
A circular part is Two versatile

held for a slot Carver Bar Style
milling operation clamps used
using Carver in a welding
Model T550-2 application.
heavy-duty Edge The clamps are
Grip clamps. The supplied with
T550-2 clamps two reversible
swivel a full 360° jaws for either
for infinite angular clamping or
alignment. spreading.
Carver heavy-duty Two Carver

Edge Grip Models Model T614-1
T550-1 and T550-2 Buttress Style
used in a milling clamps provide
application. exceptional
stability to the
workpiece in this
milling process.

CARVER Clamps
Product range
Bar-Style C-Style
Model no. max. [lbs.] Page Model no. max. [lbs.] Page
T186-24 2,500 10.4 T186-6 2,500 10.6
T186-36 2,500 T186-12
T186-60 2,500 T186-20
T186-84 2,500 T186-30
T186-96 2,500
T321-24 1,500 T321-10 1,250

T321-36 1,500
T321-60 1,500
T321-84 1,500
T321-96 1,500
T290-36 4,000 T290-9 4,000

T290-60 4,000 T290-18
T290-84 4,000 T290-40
T290-48 4,000
T285-36 2,000 T285-9 2,000

T285-60 2,000 T285-18
T285-84 2,000 T285-40
T285-48 2,000
T257-84 6,000 T257-6 6,000

T257-108 6,000 T257-12
T257-18
T257-24
T257-36
T257-54
Typical Applications
Bar Clamps “C” Clamps
No obstruction from Unaffected by weld Holds rounds to flats.

long screw. spatter. Limited movement of
Ideal for structural steel Screw is shielded and moveable jaw pad and
fabrication. out of work area. grooved face ensure
positive grip on round
objects.

CARVER Clamps
Product range
Buttress Style Edge Grip Style

Model no. max. [lbs.] Page Model no. max. [lbs.] Page
T614-0 2,875 10.8 T500 1,980 10.10
Horizontal
1,980
Vertical
T614-1 13,750 T550 9,900

Horizontal
3,960
Vertical
T614-2 17,600
T-Slot Style
Holding Capacity
Model no. max. [lbs.] Page
T400-4 5,000 10.12
Typical Applications T400-6
T400-8
Buttress Clamps
T600-4 3,500
T600-6
T600-8
T-Slot Clamps
T402-6 8,000
T402-12
Ideal for use as manual die clamps. Eliminates the need for step blocks or T402-18
riser blocks. T402-24
Edge Grip Clamps T602-6 5,500

T602-12
T602-18
T602-24
T602-30

Bar-Style
CARVER Clamps
These rugged clamps, made from high-tensile, heat-treated steel, are designed
for all types of applications requiring large holding capacities from 1,250 to
6,000 lbs. The clamps are highly versatile. For example, jaws can be reversed to
provide spreading action, or several jaws can be used on a single bar both for
fixturing and positive component location and clamping.
Available models include T321 Standard-Duty Deep Throat, T285 Medium-Duty
Deep Throat, T186 Standard-Duty, T290 Medium-Duty and T257 Heavy-Duty.
Fits 2 bars In addition, standard and medium-duty connectors are available to couple like
bars together for increased clamping reaches.
For Bar Clamps Weight
Model no. Model no. [lbs.]
T186-13 T186-.. and T321-.. 1.54

T290-13 T285-.. and T290-.. 2.87
Connector
Throat Width Opening Width Opening

Consisting of:
Depth S S1
Holding Capacity Weight
B1 Model no. 1x 2x
[lbs.] min max min max Clamping Screw Ø [lbs.]
8.50 24 2.95 26.77 T186-24 7.50 186-24-1 186-2

8.50 36 2.95 38.98 T186-36 9.50 186-36-1 186-2
2.38 8.50 60 2.95 – T186-60 M12 13.50 186-60-1 186-2
2,500 lbs.
8.50 84 2.95 – T186-84 17.50 186-84-1 186-2
8.50 96 2.95 – 19.50 186-96-1 186-2
5.50 24 3.15 27.17 T321-24 7.00 186-24-1 321-2

5.50 36 3.15 39.37 T321-36 9.00 186-36-1 321-2
4.7 5.50 60 3.15 62.99 T321-60 M12 13.00 186-60-1 321-2
1,250 lbs.
5.50 84 3.15 – T321-84 17.00 186-84-1 321-2
5.50 96 3.15 – 19.00 186-96-1 321-2
10.00 36 4.72 39.57 T290-36 20.50 290-36-1 290-2

10.00 48 4.72 – T290-48 24.50 290-48-1 290-2
3.5 M16
10.00 60 4.72 63.78 T290-60 28.50 290-60-1 290-2
4,000 lbs.
10.00 84 4.72 87.40 T290-84 36.50 290-84-1 290-2
6.00 36 4.72 42.72 T285-36 24.50 290-36-1 285-2

6.00 48 4.72 – T285-48 28.50 290-48-1 285-2
8.0 M16
6.00 60 4.72 66.93 T285-60 32.50 290-60-1 285-2
2,000 lbs.
6.00 84 4.72 90.55 T285-84 40.50 290-84-1 285-2
12.00 84 5.90 86.61 T257-84 61.00 257-84-1 257-2

4.5 12.00 108 5.90 – T257-108 M20 71.00 257-108-1 257-2
6,000 lbs.

Bar-Style
CARVER Clamps
Model no. A A1 A2 B B2 B3 B4 L
T186-24 0.98 0.47 2.99 1.26 1.73 1.18 2.99 27.75

T186-36 0.98 0.47 2.99 1.26 1.73 1.18 2.99 39.75
T186-60 0.98 0.47 2.99 1.26 1.73 1.18 2.99 63.95
T186-84 0.98 0.47 2.99 1.26 1.73 1.18 2.99 87.75
T186-96 0.98 0.47 2.99 1.26 1.73 1.18 2.99 99.75
T321-24 0.98 0.47 2.99 1.26 4.09 1.18 2.99 27.75

T321-36 0.98 0.47 2.99 1.26 4.09 1.18 2.99 39.75
T321-60 0.98 0.47 2.99 1.26 4.09 1.18 2.99 63.95
T321-84 0.98 0.47 2.99 1.26 4.09 1.18 2.99 87.75
T321-96 0.98 0.47 2.99 1.26 4.09 1.18 2.99 99.75
T290-36 1.50 0.79 5.51 2.00 2.56 1.57 4.13 39.75

T290-48 1.50 0.79 5.51 2.00 2.56 1.57 4.13 51.50
T290-60 1.50 0.79 5.51 2.00 2.56 1.57 4.13 63.38
T290-84 1.50 0.79 5.51 2.00 2.56 1.57 4.13 87.50
T285-36 1.50 0.79 5.51 2.00 7.09 1.57 4.13 39.75

T285-48 1.50 0.79 5.51 2.00 7.09 1.57 4.13 51.50
T285-60 1.50 0.79 5.51 2.00 7.09 1.57 4.13 63.38
T285-84 1.50 0.79 5.51 2.00 7.09 1.57 4.13 87.50
T257-84 2.00 0.87 7.36 2.50 3.27 2.05 5.00 90.38

T257-108 2.00 0.87 7.36 2.50 3.27 2.05 5.00 114.38

CARVER Clamps
C-Style
Operation
with the workpiece – there is no rotating to twist
Operation is very simple. The operator slides the
the work or the clamp out of position.
spring loaded moveable jaw toward the workpiece to
the nearest notch where it locks into the detent. An unusual and very useful feature of these clamps
Hand tightening the screw advances the clamp jaw. is the ability to use the clamp for spreading or
The jaw advances the tilting pad directly into contact locating as well as squeezing.
1. Loosen Screw 2. Push In Jaw Base 3. Slide Jaw Up or Down 4. Tighten Screw
Throat Width Consisting of:

Holding Capacity Depth Opening Weight
[lbs.] B1 S Model no. Clamping Screw Ø [lbs.] 1x 2x
0-6 T186-6 2.75 186-6-1 186-2

0-12 T186-12 3.75 186-12-1 186-2
2.38 M12
2,500 0-20 T186-20 5.51 186-20-1 186-2
lbs.
0-30 T186-30 7.05 186-30-1 186-2
4.75 0-10 T321-10 M12 4.00 321-10-1 321-2

1,500
lbs.
290-2
0-9 T290-9 10.00 290-9-1
290-2
3.50 0-18 T290-18 M16 13.50 290-18-1
290-2
4,000 0-40 T290-40 23.15 290-40-1
lbs. 290-2
0-9 T285-9 12.00 285-9-1 285-2

8.00 0-18 T285-18 M16 13.50 285-18-1 285-2
0-40 T285-40 25.35 285-40-1 285-2
2,000
lbs.
0-6 T257-6 20.00 257-6-1 257-2

0-12 T257-12 22.50 257-12-1 257-2
0-18 T257-18 25.00 257-18-1 257-2
4.50 M20
0-24 T257-24 27.50 257-24-1 257-2
6,000
lbs. 0-36 T257-36 32.50 257-36-1 257-2
0-54 T257-54 41.00 257-54-1 257-2

CARVER Clamps
C-Style
(Throat Depth)
Model no. A A1 A2 B B2 B3 B4 L L1
T186-6 0.98 0.51 3.00 1.25 1.69 1.30 3.00 9.63 0.88
T186-12 0.98 0.51 3.00 1.25 1.69 1.30 3.00 15.50 0.88
T186-20 0.98 0.47 3.00 1.38 1.69 1.18 3.00 27.36 3.15
T186-30 0.98 0.47 3.00 1.38 1.69 1.18 3.00 34.45 1.18
T321-10 0.98 0.51 3.00 1.25 4.02 1.32 3.00 14.25 1.00
T290-9 1.57 0.79 5.51 2.36 2.56 1.57 4.13 16.50 2.75
T290-18 1.57 0.79 5.51 2.36 2.56 1.57 4.13 25.50 2.75
T290-40 1.57 0.79 5.51 2.36 2.56 1.57 4.13 47.44 2.75
T285-9 1.57 0.79 5.51 2.36 7.09 1.57 4.13 16.50 2.75
T285-18 1.57 0.79 5.51 2.36 7.09 1.57 4.13 25.50 2.75
T285-40 1.57 0.79 5.51 2.36 7.09 1.57 4.13 47.44 2.75
T257-6 2.00 0.87 7.36 2.36 3.35 2.00 5.00 13.38 3.75
T257-12 2.00 0.87 7.36 2.36 3.35 2.00 5.00 21.50 3.75
T257-18 2.00 0.87 7.36 2.36 3.35 2.00 5.00 27.38 3.75
T257-24 2.00 0.87 7.36 2.36 3.35 2.00 5.00 33.50 3.75
T257-36 2.00 0.87 7.36 2.36 3.35 2.00 5.00 45.50 3.75
T257-54 2.00 0.87 7.36 2.36 3.35 2.00 5.00 63.50 3.75

CARVER Clamps
Buttress Style
These workholding clamps are designed for use on thin or The two-point contact offered by Models T614-0 and T614-1 also
low-profile workpieces replacing ordinary strap clamps. They provides greater stability to the workpiece. Ideally suited for
feature a self-aligning swiveling pivot which allows the tightening bolt manual die clamping. Eliminates the need for step blocks or
to always remain vertical, preventing any side forces. riser blocks.
Holding Capacity Working Height For screw Weight

[lbs.] Range diameter Model no. [lbs.]
2,875 lbs.
0-1.75" 1/2" T614-0 1.5
5/8"
13,750 lbs.
0-2.25" and T614-1 5.8
3/4"
17,600 lbs. 0-3.00" 1" T614-2 9.5

CARVER Clamps
Buttress Style
Holding capacity 2,875 lbs.

ØD Clamping height 1.75" max.
B1 Model no. T614-0
B
C2
B3
B4
A
A1

Ø D
Clamping height 2.25" max.
B1 Model no. T614-1
B
Delivery includes reducing bush with
inner diameter 0.67".
C2
Reducer bushing is standard equipment
B3
B4
A
D1
Ø
A1
D
Ø
Clamping height 3.00" max.
Model no. T614-2
B1
B4
C2
C2a
A1
Model no. A A1 B B1 B3 B4 C2 C2a ØD ØD1
T614-0 3.54 4.34 1.41 2.56 0.78 1.56 0.78 – 0.51 –

T614-1 5.28 6.31 2.38 3.94 1.13 2.69 1.81 – 0.83 0.67
T614-2 5.83 6.69 – 5.13 – 2.56 1.97 1.57 1.02 –

CARVER Clamps
Edge Grip Style
These low-profile clamps apply both horizontal and vertical clamping Because the Edge Grip clamp set consists of two separate
force against the workpiece to pull it down onto the work table as pieces – both locked to the T-Slot table – any length part (within the
well as clamp it in position. They are designed to be used with T-Slot dimensions of the table) can be clamped.
tables (or bolted to a plate) and allow maximum cutter access to the
The heavy-duty model also gives the additional advantage of
workpiece‘s surface. Edge Grip clamps are excellent for milling,
swiveling through a full 360° for infinite angular alignment and gives a
planing, grinding and general surfacing operations which are beyond the
choice of two mounting hole sizes.
capabilities of machine vises.
Model no. T500
Model no. T550
Clamping force
For screw Weight
Horizontal Vertical The total set consists diameter Model no. [lbs.]
1,980 lbs. 1,980 lbs.

1 moving head with swarf cover
(T500-1) (T500-2)
1 fixed head with swarf cover
4 T-slot nuts 14 (M12) 1/2" T500 8.38
4 button head socket screws
(M12 x 35)
2 hex keys
9,900 lbs. 3,960 lbs.
1 Moving head
(T550-1) 5/8"
and T550 52.91
1 Fixed head 3/4"
(T550-1)

CARVER Clamps
Edge Grip Style
Moving head (Model no. T500-1) Stainless steel protective cap Fixed head (Model no. T500-2)
Hold
down
movement
1.18
1.19
0.13
SW 0.75
0.31 Clamping movement
1.38 2.20 1.38

2.59
2.44
5.78 4.25
Operating instruction
1. Place clamps against workpiece and tighten cap screws on 4. Tighten down jaw screws on fixed and moving heads
fixed head 5. Apply pressure with rear-nut
2. Tighten anchor cap screws on moving head
3. Apply pressure with rear-nut slightly
Moving head (Model no. T550-1) Fixed head (Model no. T550-2)
SW 1.18
Hold
3.00 2.76 down
movement
5.94
0.28
SW 1.18
0.88 Clamping movement

8
5/
5.94 2.24 5.63

4
3/
2.09
min. 4.65
4.80
max. 5.63
9.63 7.69

CARVER Clamps
T-Slot Style
These clamps provide rapid height adjustment and positive holding. When setting up, the safety lock on the back is released and the clamp
They are designed with a single-unit clamp head and base. lifted on the base to the desired height. When the clamp screw is
The DE-STA-CO CARVER T-Slot Clamp is one single assembly – there turned, 100% of the force is transmitted to the work-piece. Backing off
are no loose parts. the clamp adjusting screw and releasing the safety lock and lifting the
clamp head makes for rapid job changeover.
Formula to Calculate Clamping Force
Torque (in. lbf.)

Force (lbf.) =
Thread Size (in.) x 0.12
Throat Depth Working Height

Holding Capacity C Max. Accessories standard Weight
[lbs.] a b min. max. Model No. Torque equipment [lbs.]
1.00 4.00 T400-4 4.00
5,000 0.55 1.30 1.00 6.00 T400-6 36 ft. lbs. 4.25

lbs.
2.50 8.00 T400-8 4.60
2 T-slot nuts with

matching 14 mm bolt
0.50 4.00 T600-4 4.80
2.24 2.87 0.50 6.00 T600-6 30 ft. lbs. 5.10
3,500
lbs. 2.00 8.00 T600-8 5.40
0 6.00 T402-6 14.00

0 12.00 T402-12 17.70
1.73 2.68 85 ft. lbs.
8,000 6.00 18.00 T402-18 19.40
lbs.
12.00 24.00 T402-24 20.00
2 T-slot nuts with

matching 18 mm bolt
0 6.00 T602-6 16.00

0 12.00 T602-12 19.80
3.90 4.84 6.00 18.00 T602-18 70 ft. lbs. 21.60
5,500
12.00 24.00 T602-24 24.30
lbs.
18.00 30.00 T602-30 28.00

CARVER Clamps
T-Slot Style
These clamps provide rapid height adjustment and positive Safety – No loose parts. Clamp and base are one unit.
holding. They are designed with a single-unit clamp head and base, Higher clamping force holds parts more securely and safely.
providing up to 8,000 lbs. of positive holding capacity for
Speed – The clamp head adjusts much faster than an operator can
workpieces up to 60” high. The design applies 100% of the screw
select proper size spacers and bolts. Benefits include:
force directly onto the workpiece far more than any strap clamp
Cuts set-up time by as much as 80%
arrangement. Additionally, there is no searching for the correct riser
Reduces machine downtime
block height. The DE-STA-CO CARVER T-Slot Clamp is one single
Offers more rapid loading and unloading
assembly – there are no loose parts.
Economy – Tool tip technology and digital control have reduced
When setting up, the safety lock on the back is released and the clamp
machining time. Why lose these advantages on long set-up times?
lifted on the base to the desired height. When the clamp screw is
T-Slot clamps can reduce set-up time by as much as 80%. Benefit:
turned, 100% of the force is transmitted to the workpiece. Backing off
Money saved.
the clamp adjusting screw and releasing the safety lock and lifting the
clamp head makes for rapid job changeover. Ease of Operation – Loosen adjusting screw and release
safety catch to adjust height instantly.
Versatility – Selection of bases gives clamping heights from 0" to 60".
Two or more heads can be used on one base to position and hold down
as well as support – ideal for fine height adjustment during set-up. Also
eliminates riser blocks.
T602
T402
Ideal for use as manual die clamps. Eliminates the need The T402 and T602 can be reversed on their bases to
for step blocks or riser blocks. give added reach.

CARVER Clamps
T-Slot Style
L
B2
B2
C1 C1
F F ØD
ØD
L1
C2
L1
C2
C
A A1 C
B1
B1
a=14 A3 A A1
a=44 A3
Model no. T400-.. Model no. T402-..
If the T402 is reversed on its base, the measurement

of the throat depth will change.
T400-.. T402-..
a 0.55 1.73
a b b 1.30 2.68
Consisting of
Clamping
Model no. A A1 A3 B1 B2 C C1 C2 ØD F L L1 1x 2x Screw Size Ø
T400-4 2.12 3.78 0.45 2.00 1.03 1-4 1.09 0.63 0.53 1.02 6.31 1.44 400-2 400-4-1 12mm
T400-6 2.12 3.78 0.45 2.00 1.03 1-6 1.09 0.63 0.53 1.02 6.31 1.44 400-2 400-6-1 12mm
T400-8 2.12 3.78 0.45 2.00 1.03 2.5-8 1.09 0.63 0.53 1.02 6.31 1.44 400-2 400-8-1 12mm
T402-6 2.81 5.50 0.61 3.00 3.11 0-6 1.69 0.75 0.66 1.50 9.63 2.56 402-2 402-6-1 20mm
T402-12 2.81 5.50 0.61 3.00 3.11 0-12 1.69 0.75 0.66 1.50 9.63 2.56 402-2 402-12-1 20mm
T402-18 2.81 5.50 0.61 3.00 3.11 6-18 1.69 0.75 0.66 1.50 9.63 2.56 402-2 402-18-1 20mm
T402-24 2.84 5.50 0.61 3.00 3.11 12-24 1.69 0.75 0.66 1.50 9.63 2.56 402-2 402-24-1 20mm

CARVER Clamps
T-Slot Style
L
L
F
F1
F1 B2 F
F1
F1 B2
ØD
C1
L1
C2
C1 ØD
C B1
L1
A A1 C2
A3
a=57
C B1
A A1
Model no. T600-..
A3
a=99
Model no. T602-..
If the T602 is reversed on its base, the measurement

of the throat depth will change.
T600-.. T602-..
a 2.24 3.90
a b b 2.87 4.84
Consisting of Clamping Screw

Model no. A A1 A3 B1 B2 C C1 C2 ØD F F1 L L1 1x 2x Size Ø
T600-4 2.12 3.78 0.45 2.00 1.91 .5-4 1.50 0.63 0.53 1.97 0.41 7.88 2.94 600-2 600-4-1 12mm
T600-6 2.12 3.78 0.45 2.00 1.91 .5-6 1.50 0.63 0.53 1.97 0.41 7.88 2.94 600-2 600-6-1 12mm
T600-8 2.12 3.78 0.45 2.00 1.91 2-8 1.50 0.63 0.53 1.97 0.41 7.88 2.94 600-2 600-8-1 12mm
T602-6 2.81 5.50 0.61 3.00 3.53 0-6 2.75 0.75 0.66 2.68 0.51 12.13 4.50 602-2 402-6-1 20mm
T602-12 2.81 5.50 0.61 3.00 3.53 0-12 2.75 0.75 0.66 2.68 0.51 12.13 4.50 602-2 402-12-1 20mm
T602-18 2.81 5.50 0.61 3.00 3.53 6-18 2.75 0.75 0.66 2.68 0.51 12.13 4.50 602-2 402-18-1 20mm
T602-24 2.81 5.50 0.61 3.00 3.53 12-24 2.75 0.75 0.66 2.68 0.51 12.13 4.50 602-2 402-24-1 20mm
T602-30 2.81 5.50 0.61 3.00 3.53 18-30 2.75 0.75 0.66 2.68 0.51 12.13 4.50 602-2 402-30-1 20mm

CARVER Clamps
Notes

Standard Pneumatic Clamps
New products
NEW
Model 8031
Model 8031 is DE-STA-CO’s newest clamp in a line of fully enclosed pneumatic clamps. Model 8031 is the
fully enclosed version of the pneumatic clamp 803. With its patented design, this clamp can be used in the
harshest environments. Cylinder is sensor ready, and the clamp can be hard piped.
page 11.20

Standard Pneumatic Clamps Product group – standard pneumatic clamps
Holding Capacity Exerting Force Holding Capacity Exerting Force
Model no. max. [lbs.] [PSI] Page Model no. max. [lbs.] [PSI] Page
Inner Outer Inner Outer 11.8 Inner Outer Inner Outer 11.14
802-U 200 110 200 160 858 4,000 2,000 1,600 9000
807-U 375 275 350 150
810-U 600 290 600 400
812-U 100 55 135 960
847-U 1,000 480 750 450
807-S 500 260 500 150 11.9 817-S 450 200 400 200 11.15
810-S 750 500 700 400 827-S 700 500 300
847-S 1,000 650 1,000 450
8007-2F 800 400 600 400 11.10 817-U 375 200 320 200 11.16
8007-2FA 800 400 600 400 827-U 600 500 300
8021 390 – 175 100 11.11 868 4,000 1,600 900 11.17
8071 450 – 302 194
8101 700 – 500 275
846 750 – 750 500 11.12 803 600 600 11.18

803-M 600 600
849 2,000 – 1,200 1,000 11.13 816 200 190 11.19

816-M 200 190

Product group – standard pneumatic clamps
Holding Capacity Exerting Force
Model no. max. [lbs.] [PSI] Page
8031 2,000 600 11.20
830 2,500 800 11.21

830-M 2,500 800
850 16,000 2,050 11.22

850-M 16,000 2,050
800 850-1500 70-150 11.24

1200 750-1600 70-150
801 11.25
870-2 2,000 170/350 11.26

871-2 2,000 170/350

Standard Pneumatic Clamps Product group – standard pneumatic clamps

Product group – standard pneumatic clamps
High safety standard The main product features
The DE-STA-CO pneumatic toggle action power clamps lock in the Ideal for the production environment
over-center position when clamped. If used correctly, these clamps Large opening angles
remain closed even if exposed to vibrations, changing loads and High exerting forces and holding capacities
air-pressure failure. Compact design
Low air consumption
End position sensing
Sensors available for detecting the open/close position of the
cylinder, making the clamp useful in automated production
applications.
Model 807-U
Model 830
Model 868

Standard Pneumatic Clamps Pneumatic clamps for single and mass production
General
In additioin to the extensive range of manual clamping devices,
DE-STA-CO also offers pneumatically operated power clamps.
Reduction of non-productive time

Reduction of non-productive time is of increasing importance in
modern manufacturing processes, even at a small and medium
production scale. Even a manually operated toggle clamp helps
reduce considerably the non-productive time of clamping and
releasing parts. This effect is multiplied by the amount of clamp ing
stations. If several or even all clamping stations can be opened and
closed simultaneously from a central point by “pressing a button,” the
non production time for clamping becomes almost negligible.
A control valve allows simultaneous operation of as many DE-STA-CO
Model 817-U is equipped with an end position sensing system on
power clamps as required.
a pneumatic clamping fixture.
Constant and high exerting forces
Constant air pressure produces constant exerting forces. In many
applications repeatable exerting forces are necessary to obtain
constant quality of the parts to be manufactured. Only power clamps
guarantee necessary repeatability of the exerting forces as well as the
possibility of regulating the exerting forces by modifying the air supply
without jeopardizing the clamp s holding capacity. High exerting forces
are achieved without overexerting the operator – he simply actuates a
control valve – hence no risk of fatigue or lack of consistency.
Quality and durability

DE-STA-CO stands for high quality clamps all over the world.
Including power clamps. This applies both to the clamps‘ mechanical
parts and to the pneumatic cylinders we use. Our cylinders are
specially designed for our clamps, have chrome finished piston rods Models 807-U on a drilling fixture
and are specially lubricated. Depending on the model, the clamps are
equipped with stainless steel rivets, hardened and ground pivot pins,
and maintenance-free high-performance bushings. This guarantees
long service life and high cycle times.
Model 817-U on a pneumatic clamping fixture

Pneumatic clamps for single and mass production
End position sensing of the pneumatic clamps for Remote control and end position sensing
automated production A particularly interesting advantage of DE-STA-CO power clamps is
the fact that they may be mounted on rather inaccessible places of
Different options clamping fixtures and they may be operated simultaneously while
being controlled by a control valve. Power clamps with an end
position sensing system allow fully automated operation with in
controlled manufacturing processes.
Safety
DE-STA-CO power clamps are based on the toggle action principle
Model 807-S with
(exceptions will be mentioned separately) and offer the same safety
2 integral groove mounted sensors
advantages as DE-STA-CO manual clamps: no risk of accidental
(order separately)
opening of the clamp arm – even in case of a sudden pressure drop.
The toggle action principle with over-center locking guarantees

safety during operation and protects the parts from damage.
(Provided that the power clamps are mounted correctly and the air
supply is reliable.)
Note: Most pneumatic products are now supplied with a magnetic

ring on the piston as a standard feature for sensing the position of
the cylinder (open/closed).
Model 871 with Seals: The standard cylinders are equipped with Buna-N seals and
2 tie-rod mounted sensors may be operated over a temperature range of -40º to +250º F. High
(order separately) temperature Viton® seals extend the temperature range from -20º to
+400º F. These can be ordered upon request.
Pneumatic diagram
Schalldämpfer
silencer Wartungseinheit
maintenance unit
air supply
Druckluft-
manual
Hand-Steuerventil Verteilerstück
3-way connector
operated valve ausgang
Standard-Kraftspanner
standard power clamp
Kunststoffschlauch
plastic hose
Schnellverschraubung
quick connector
automation
Automations-
power clamp
Kraftspanner
Fuß-Steuerventil
foot operated
Pneumatic accessories see page 13.1 forward

Models 802-U, 807-U, 810-U, 812-U, 847-U
Cylinder horizontal
Max.
Maximum Holding Exerting Force Operating
Capacity @ 80 PSI Pressure
Model n Inner Outer Inner Outer [PSI] Port Size Weight Standard equipment
802-U 200 110 200 160 40 1/8 NPT 1.60 202208-M
807-U 375 275 350 150 55 1/8 NPT 2.30 507107 (flanged washers)
810-U 600 290 600 400 70 1/8 NPT 4.07 235106 (flanged washers)
812-U 100 55 135 96 80 10-32 NF 0.46 305208-M
847-U 1,000 480 750 450 60 1/8 NPT 8.93 247109 (flanged washers)
ALSO AVAILABLE
With Viton Seals Model 802-U-HT
Model 807-U-HT
Model 810-U-HT
Model 812-U-HT Öffnungs-
Opening-
Model 847-U-HT M
H1
Switch Options Pages 13.1–13.4
C C1
See accessories beginning on pages 9.1 and 13.1.
H
L1 A1
C2
L3 G
ing
etic R
Magn ow A e
N eatur
ard F
Stand
B2
B1
B
F
L2
A3 A ØD
L
Model 807-U Model 812-U Model 847-U
Opening angle
Model no. A A1 A3 B B1 B2 C C1 C2 ØD F H H1 L L1 L2 L3 M +/-5º
802-U 0.50 1.50 0.25 1.06 2.22 1.93 1.04 0.38 0.24 0.22 0.28 2.58 3.82 7.69 1.73 0.50 0.99 M6 95º
807-U 0.75 2.00 0.63 1.24 2.26 2.06 1.38 0.63 0.25 0.28 0.34 3.02 5.98 9.05 2.51 0.26 2.23 M8 92º
810-U 1.25 4.22 0.38 1.79 3.07 2.86 1.79 0.79 0.24 0.33 0.40 3.79 7.28 12.32 3.57 0.86 2.35 M10 95º
812-U 0.63 1.00 0.18 0.94 1.54 1.50 0.68 0.31 0.13 0.18 0.22 1.53 – 5.59 1.02 0.11 0.75 M5 90º
847-U 1.25 6.22 0.38 1.78 3.62 3.56 2.25 0.88 0.44 0.34 0.53 4.40 – 15.95 4.87 1.36 3.14 M12 95º

Models 807-S, 810-S, 847-S
Cylinder horizontal
Max.
Maximum Holding Exerting Force Operating
Model no. Inner Outer Inner Outer [PSI] Port Size Weight Bolt Retainer
807-S 500 260 500 150 80 1/8 NPT 1.66 207107
810-S 750 500 700 400 80 1/8 NPT 4.07 210114
847-S 1,000 650 1,000 450 80 1/8 NPT 8.91 247110
ALSO AVAILABLE
With Viton Seals Model 807-S-HT
Model 810-S-HT
Model 847-S-HT
Opening-
ing
etic R
Magn ow A e
N eatur
ard F
Stand
Model 847-S Model 807-S
Opening angle
Model no. A A1 A3 B B1 B2 C C1 C2 ØD ØD1 F H H1 L L1 +/-5º
807-S 0.75 2.00 0.63 1.24 2.26 2.06 1.38 0.63 0.25 0.28 0.34 0.25 3.02 6.52 10.02 3.17 92º
810-S 1.25 4.22 0.38 1.79 3.07 2.86 1.81 0.75 0.24 0.33 0.53 0.31 3.79 7.99 12.22 3.47 92º
847-S 1.25 6.22 0.38 1.78 3.62 3.56 2.25 0.88 0.44 0.34 0.56 0.38 4.40 – 15.90 4.87 92º

Models 8007-2F, 8007-2FA NEW
Cylinder horizontal
Maximum Holding Exerting Force Max. Operating
Model no. Inner Outer Inner Outer [PSI] Port Size Weight Standard equipment
8007-2F 800 400 600 400 80 G 1/8 3.97 None

8007-2FA 800 400 600 400 80 G 1/8 3.97 2x SME0-1-LED
2x SMB-1
1x Assembly bar
8007-2FA is supplied with end position sensing
Model 8007-2F
Power clamp with end position sensing
Standard equipment for the model 8007-2FA:

2 sensors (SMEO-1-LED*)
2 fastening sets for sensors (SMB-1)
1 assembly bar
Model 8007-2FA
Power clamp with end position sensing at a rivet machine
Opening-
~96°
L B1
C1 L1
C
C2
L1 A1
All models available with hand lever;

optional r.h. or l.h. Add HR or HL to the part no.
F B B2
A3 A A A øD G 1/8 Model 8007-2FHL
Opening angle
Model no. A A1 A3 B B1 B2 C C1 C2 ØD F H L L1 +/-5º
8007-2F 0.94 7.52 0.31 1.81 2.76 2.60 1.40 0.71 0.31 0.25 0.39 3.07 10.16 2.68 96º

Models 8021, 8071, 8101
NEW
Enclosed version
DE-STA-CO’s newest family of pneumatic workholding hold-down profile. The non-pivoting cylinder can be hard-piped into fixtures.
clamps is ideal for dirty environments such as spot and MIG welding. Maximum intermittent temperature rating is 230º F. Clamps come with
Holding capacities exceed that of their parent clamps the 802, 807- a magnetic ring for sensing as a standard feature. Switches must be
UL and 810-U. These models also feature an enclosed, protected ordered separately.
cylinder rod and linkages, as well as a lower and narrower mounting

Model no. Inner Outer Inner Outer [PSI] Port Size Weight Flanged Washers
8021 390 – 175 100 175 1/8 NPT 2.30 8021122

8071 450 – 302 194 120 1/8 NPT 2.80 507107
8101 700 – 500 275 110 1/8 NPT 7.30 8101122
ALSO AVAILABLE
With Viton Seals Model 8021-HT

Model 8071-HT
Model 8101-HT
Opening- Switch Options Pages 13.1–13.4

Port
size ing
etic R
Magn ow A e
N eatur
ard F
Stand
Clamping bar
8021
8101
Opening angle
Model no. A A1 A3 A4 B B1 B2 C C1 C2 ØD F H H1 L L1 L2 L3 M +/-5º
8021 0.79 1.97 0.47 – 1.50 2.25 1.88 1.56 0.63 0.13 0.21 0.56 2.18 4.45 9.37 2.25 0.44 1.81 1/4 or M6 90º
8071 1.97 3.00 0.39 0.39 1.56 2.81 2.12 1.65 0.75 0.13 0.28 0.34 2.59 5.12 10.90 2.72 0.45 1.96 5/16 or M8 90º
8101 3.54 4.75 0.59 – 2.20 3.63 2.86 2.50 1.00 0.12 0.34 0.75 3.46 7.52 15.54 4.00 0.59 3.41 3/8 or M10 90º

Model 846

846 750 500 750 500 125 1/8 NPT 4.18 None
ALSO AVAILABLE Model 846 is the pneumatic version of manual clamp

With Viton Seals Model 846-HT Model 516. Its compact size is similar to that of Model
807 but with more than twice the clamping capacity.
ing
etic R
Magn ow A e
N eatur
ard F
Stand
C1
H
C2
C
F B B2 B1
A3
A1 L1
Opening angle
846 1.00 4.22 0.38 1.50 3.07 2.87 1.61 0.63 0.37 0.28 0.75 3.29 10.80 2.19 90º

Model 849

849 2,000 – 1,200 1,000 125 1/8 NPT 14.83 None
A cam mechanism in the linkage of this unique clamp will ALSO AVAILABLE
accommodate up to a 1/2" part size variation. Once set to the With Magnetic Ring Model 849-MR
nominal (or average) part size, parts up to 1/4" larger or 1/4"
smaller can be clamped without changing the setting. Bar opens
90º. Clamp bar can be machined or altered to suit the application.
H1
C1
H
A1
C2
A
A3
B B2 B1
L1
L
Opening angle
Model no. A A1 A3 B B1 B2 C C1 ØD F H H1 L L1 +/-5º
849 3.00 4.25 0.44 2.25 4.01 3.88 2.01 0.94 0.41 0.82 4.57 8.53 18.36 4.22 90º

Model 858
Cylinder horizontal
858 4,000 2,000 1,600 900 200 1/8 NPT 16.11 None
ALSO AVAILABLE
The pneumatic version of Model 568, this heavy-duty model uses forged alloy steel
With Viton Seals Model 858-HT links and steel components machined to close tolerances. Base is a 1/2" thick steel
plate. All pivot points have hardened bushings fitted with hardened steel pivot pins.
The 1 x 1-3/8" steel hold-down bar may be cut, drilled and tapped or welded to adapt
to application. Bar opens 92º.
ing
etic R
Magn ow A
N ature
n d a rd Fe
St a
Model 858
Opening-
Port
Size
B1 B2
Opening angle
858 4.25 5.60 0.63 2.75 3.88 4.00 3.84 1.38 0.50 0.41 1.00 7.12 18.19 4.81 92º

Models 817-S, 827-S
NEW
Cylinder vertical
817-S 450 200 400 200 100 1/8 NPT 2.31 207105
827-S 700 – 500 300 110 1/8 NPT 4.71 210114
Many times it is desirable to use a right angle model where space dictates. ALSO AVAILABLE
Applications such as rotary indexing tables and injection molding operations are With Viton Seals Model 817-S-HT
examples. All three models can be mounted on the side of the fixture and Models 817
and 827 can also be top mounted. Model 817 is the pneumatic version of Model 317, Switch Options Pages 13.1–13.4
and it accommodates any 5/16-18 spindle assembly (not included). Model 827 can
accept any 3/8-16 spindle accessory (not included).
Mounting Options
ing
etic R
Magn ow A e
N eatur
t a n d ard F
S
Side Mounting Top Mounting
Note: Use two bolts in the “side” mounting holes to

secure mounting bracket when “top” mounting.
Opening-
Model 817-S
A4
B3
Port
Size
Opening angle
Model no. A A2 A3 A4 B B2 B3 C C1 C2 C3 ØD ØD1 F H L L1 +/-5º
817-S 0.63 0.44 0.60 0.63 1.00 2.44 1.00 2.69 0.63 0.13 1.25 0.27 0.34 0.25 7.53 6.89 3.04 90º
827-S 1.25 0.50 0.66 1.25 1.75 2.94 1.75 3.91 0.75 0.13 2.00 0.34 0.53 0.31 9.50 8.60 3.18 88º

Models 817-U, 827-U
Cylinder vertical

817-U 375 200 320 200 80 1/8 NPT 2.31 507107
827-U 600 – 500 300 95 1/8 NPT 4.71
ALSO AVAILABLE Mounting Options

With Viton Seals Model 817-U-HT

Side Mounting Top Mounting
Note: Use two bolts in the “side” mounting holes to

secure mounting bracket when “top” mounting.
ing
etic R
Magn ow A e
N eatur
ard F
Stand
Opening--
M
C1
Model 817-U
A4
ØD
C3 C4
C
B3
C2
A2
Port
Size
B2
G
L
B
F
L3
ØD
L1 A3
A
Opening angle
Model no. A A2 A3 A4 B B2 B3 C C1 C2 C3 C4 ØD H L L1 L3 M +/-5º
817-U 0.63 0.44 0.60 0.63 1.00 2.44 1.00 3.31 0.63 0.12 1.38 1.30 0.27 7.53 6.20 2.37 1.97 M8 90º
827-U 1.25 0.38 0.66 1.25 1.75 2.94 1.75 4.72 0.79 0.13 2.00 1.76 0.34 9.50 8.69 3.27 2.35 M10 90º

Model 868
Cylinder vertical

868 4,000 – 1,600 900 200 1/8 NPT 17.00 None
ALSO AVAILABLE
Bar can be machined or welded
ing
etic R
Magn ow A e
N eatur
ard F
Stand
Model 868
Opening-
Port Size
Power clamp model 868 in an automated welding fixture for

clamping of longitudinal beams.
Opening angle
Model no. A A2 B B1 C C1 C2 C3 C4 ØD F H L L1 +/-5º
868 1.63 0.89 2.25 4.00 4.20 1.25 0.38 3.00 1.50 0.41 1.25 14.16 10.08 4.69 90º

Models 803, 803-M
Straight-line action power clamp
Maximum Max. Operating

Holding Capacity Exerting Force Pressure Plunger Recommended
Model no. [lbs.] @ 80 PSI [PSI] Travel Port Size Weight (not supplied)
803 600 600 80 0.75 1/8 NPT 1.86 225208
803-M 600 600 80 0.75 G1/8 1.86 225208-M
ALSO AVAILABLE This compact plunger action clamp is less than 10" long but provides a
With Viton Seals Model 803-HT holding capacity of up to 600 lbs. The 7/16" diameter plunger extends 3/4"
to a locked position. The end of the plunger is drilled and tapped for a 5/16-
18 spindle (not supplied).
ing
etic R
Magn ow A e
N eatur
ard F
Stand
Model 803 Model 803-M
Plunger Travel
stroke
H
C1
C2
A6 B1
A2 A1
A3 A
(unclamp)
Port size
(clamp)
M
B
L3 øD
Model no. A A1 A2 A3 A6 B B1 C1 C2 ØD H L L3 M
803 1.44 2.00 2.16 0.28 0.95 1.31 2.37 1.09 0.31 0.27 2.96 9.91 1.00 5/16-18
803-M 1.44 2.00 2.16 0.28 0.95 1.31 2.37 1.09 0.31 0.27 2.96 9.91 1.00 M8

Models 816, 816-M

Holding Capacity Exerting Force Pressure Plunger
Model no. [lbs.] @ 80 PSI [PSI] Travel Port Size Weight Standard equipment
816 200 190 60 0.44 10-32 NF 0.43 105203
816-M 200 190 60 0.44 10-32 NF 0.43 205208-M
ALSO AVAILABLE
ing
etic R
Magn ow A e
N eatur
ard F
Stand
Port Size
stroke
11
C1 C2
L3 B
A2 A1 B1
L B2
A3 A
øD1
M
øD
Model no. A A1 A2 A3 B B1 B2 C1 C2 ØD ØD1 H L L3 M
816 0.63 1.32 1.30 0.32 0.63 1.31 1.54 0.56 0.15 0.17 0.25 1.51 6.22 0.50 8-32
816-M 0.63 1.32 1.29 0.32 0.63 1.31 1.54 0.56 0.15 0.17 0.25 1.51 6.21 0.50 M4

Model 8031
NEW

8031 2,000 600 80 0.75 1/8 NPT 2.58 225208-M
ALSO AVAILABLE
Model 8031 is DE-STA-CO’s newest clamp in a line of fully
enclosed pneumatic clamps. Model 8031 is the fully enclosed
version of the pneumatic clamp 803. With its patented design,
this clamp can be used in the harshest environments. Cylinder
is sensor ready, and the clamp can be hard piped.
Light-weight compact design allows clamp to be used in
tight areas
Holding capacity up to 2000 lbs.
ing
etic R Cylinder is sensor ready
Magn ow A e
N eatur Fully enclosed design allows clamp to be used in the
t a n d ard F
S
harshest environments
Patent #6,755,406
Rod wiper keeps grease in and contaminants out
Can be hard piped – no need for hoses
L
C1
H
M
L3
C2
D1
A3 D
B1
B
A2
A1
Model no. A A1 A2 A3 B B1 C1 C2 ØD ØD1 H L L3 M
8031 2.17 3.19 1.25 0.47 2.36 2.75 0.59 0.13 0.27 0.44 2.37 7.80 0.75 M8

Models 830, 830-M

830 2,500 800 145 1.25 1/8 NPT 6.14 210203
830-M 2,500 800 145 1.25 1/8 NPT 6.14 210203-M
The 5/8" diameter plunger travels forward 1-1/4" from an open ALSO AVAILABLE
to a closed and locked position. Plunger is drilled and tapped to With Viton Seals Model 830-HT
accept a 3/8-16 spindle (not supplied) or to mount your custom
fixture.
ing
etic R
Magn ow A e
N eatur
t a n d ard F
S
Model 830
Plunger Travel
Port Size
Model no. A A1 A2 A3 B B1 C1 C2 ØD ØD1 H L L3 M
830 1.38 7.75 1.62 0.50 1.62 3.07 1.06 0.44 0.34 0.62 3.26 14.08 1.25 3/8-16
830-M 1.38 7.75 1.62 0.50 1.62 3.07 1.06 0.44 0.34 0.62 3.26 14.08 1.25 M10

Models 850, 850-M
Max.
Maximum Operating
Holding Capacity Pressure
Exerting Force Plunger Recommended
Model no. [lbs.] @ 80 PSI [PSI] Travel Port Sizt Weight (not supplied)
850 16,000 2,050 125 2.00 1/8 NPT 16.66 250203
850-M 16,000 2,050 125 2.00 1/8 NPT 16.66 250203-M
ALSO AVAILABLE
Largest of the straight-line actions, this model has a full 1" diameter plunger that extends
With Viton Seals Model 850-HT 2" and goes into a mechanical lock. A 3/8" thick steel base provides rigidity and can be
welded or bolted in position. Snap ring construction permits easy removal of the plunger
without disassembling the entire unit. End of plunger accommodates any 5/8-11 spindle
assembly (not supplied).
ing
etic R
Magn ow A e
N eatur
ard F
Stand
Model 850
Plunger Travel
Port Size
Model no. A A1 A3 B B1 C1 C2 ØD ØD1 H L L1 L3 M
850 2.75 9.05 1.69 2.25 4.00 2.63 0.38 0.41 0.99 7.15 20.94 4.54 2.00 5/8-11
850-M 2.75 9.05 1.69 2.25 4.00 2.63 0.38 0.41 0.99 7.15 20.94 4.54 2.00 M16

Specifications
Max. Mechanical Advantage Exerting Force

Maximum Inlet
(MA) at at 80 PSIG
Pressure Spindle Spindle Spindle Spindle
Model no. EDP no. Cylinder Bore Cylinder Area at Max MA Loc. A Loc. B Loc. B Loc. A
802-U 58020 1.13 0.994 sq. in. 40 PSIG 5:1 2:1 160 lbs. 200 lbs.
807-S 58071 1.13 0.994 sq. in. 80 PSIG 6:1 2:1 150 lbs. 500 lbs.
807-U 58070 1.13 0.994 sq. in. 550 PSIG 6:1 3:1 150 lbs. 350 lbs.
810-S 58101 1.50 1.767 sq. in. 80 PSIG 5:1 2.9:1 400 lbs. 700 lbs.
810-U 58100 1.50 1.767 sq. in. 70 PSIG 5:1 2.9:1 400 lbs. 600 lbs.
812-U 58120 0.75 0.441 sq. in. 80 PSIG 3.8:1 2.7:1 98 lbs. 135 lbs.
846 58460 1.50 1.767 sq. in. 125 PSIG 5.6:1 3.5:1 500 lbs. 750 lbs.
847-S 58471 2.00 3.141 sq. in. 80 PSIG 4:1 1.8:1 450 lbs. 1,000 lbs.
847-U 58470 2.00 3.141 sq. in. 60 PSIG 4:1 1.8:1 450 lbs. 750 lbs.
849 58490 2.50 4.903 sq. in. 125 PSIG 2.4:1 2.0:1 1,000 lbs. 1,200 lbs.
858 58580 2.50 4.903 sq. in. 200 PSIG 4:1 2.3:1 900 lbs. 1,600 lbs.
8021 58025 1.13 0.881 sq. in. 175 PSIG 2.2:1 1.3:1 100 lbs. 1,750 lbs.
8071 58080 1.50 1.654 sq. in. 105 PSIG 4.2:1 2.4:1 250 lbs. 450 lbs.
8101 58105 2.00 2.830 sq. in. 110 PSIG 2.0:1 1.1:1 275 lbs. 500 lbs.
Max. Mechanical Advantage

(MA) at
Maximum Inlet Spindle Spindle Exerting Force
Model no. EDP no. Cylinder Bore Cylinder Area Pressure Loc. A Loc. B at 80 PSIG
817-S 58171 1.13 0.994 sq. in. 100 PSIG 4:1 2.5:1 200/400 lbs.
817-U 58170 1.13 0.994 sq. in. 80 PSIG 4:1 2.5:1 200/320 lbs.
827-S 58271 1.50 1.767 sq. in. 110 PSIG 3.5:1 2:1 300/500 lbs.
827-U 58270 1.50 1.767 sq. in. 95 PSIG 3.5:1 2:1 300/500 lbs.
868 58680 2.50 4.903 sq. in. 200 PSIG 4:1 2.3:1 900/1,600 lbs.
Maximum Inlet Max. Mechanical Advantage Exerting Force

Model no. EDP no. Cylinder Bore Cylinder Area Pressure (MA) at at 80 PSIG
803 58030 1.13 0.994 sq. in. 80 PSIG 7.5:1 600 lbs.
816 58160 0.75 0.441 sq. in. 60 PSIG 5.5:1 190 lbs.
830 58300 1.50 1.767 sq. in. 145 PSIG 5.7:1 800 lbs.
850 58500 2.50 4.903 sq. in. 125 PSIG 5.2:1 2,050 lbs.
8031 58301 1.12 0.994 sq. in. 80 PSIG 7.5:1 600 lbs.
*All power clamps may also be used with hydraulic oil as the pressure medium, but in no case should the inlet pressure be high
enough to create an exerting force that exceeds the clamp’s maximum holding capacity.
Formula For Calculating Maximum Allowable Inlet Pressure

Maximum Line Pressure = Holding Capacity Spindle position to determine mechanical advantage.
Cylinder Area x Mechanical Advantage
Formula For Calculating Exerting Force B A

Exerting Force = Inlet Pressure x MA x Cylinder Area
Example For Model 830:

Holding Capacity = 2500 lbs.
Inlet Pressure = 80 PSIG
Cylinder Area = 1.767 in.2
MA = 5.7:1
Maximum Line Pressure = 2500 lbs.

= 248 PSIG
1.767 in.2 x 9.8
Exerting Force = 80 PSIG x 1.767 in.2 x 5.7 = 806 lbs.

Models 800, 1200
Even the smallest shop can now have rapid power clamping. The Here’s how it works:
DE-STA-CO Low Profile Pneumatic Retractor Clamp operates on ordinary 1. Clamp arm retracts fully for loading and unloading ease.
shop line air (properly filtered and lubricated). The clamp arm completely 2. Clamp arm moves straight forward
retracts from the work area, for ease in part loading and unloading. The 3. Clamp arm pivots down to hold workpiece firmly in position.
resulting increase in productivity can also reduce your labor costs. 4. Use Model 930 or 940 valve and plug one end port on each side
to operate as a three way valve.
Compact size and low profile for mounting in restricted areas.
Uniform clamping force throughout full stroke.
Variable clamping force allowed by regulating input pressure.
Requires no auxiliary power source.
Operates in any position or mounting angle.
Clamping capacities to 1,600 lbs. (at 150 PSIG).
Both models available with extended arm, as Models 800-E
and 1200-E.
Model 800
ALSO AVAILABLE
G K
P
D
L
Model 800-E
R
N H E C
Clamping Arm Configuration Q
a b c F Model E
M
0.50 0.19 0.31
B
a
K b
Input Pressure Exerting Force
R c
Model no. [PSI] Range A
800 70-150 PSI 850-1500

Arm Configuration
800-E 70-150 PSI 650-1200 (Enlarged For Detail)
1200 70-150 PSI 750-1600

1200-E 70-150 PSI 550-1200
Minimum Operating Pressure 70 PSIG
Clamping Mtg.
Model no. EDP no. Weight A B C D E F G H K L M N P Q Range R Holes
800 58000 2.50 lbs. 1.63 4.81 2.72 0.25 2.21 0.25 3.13 1.19 0.50 1/4 NPT 2.31 1.50 – 0.59 0.09 0.26
800-E 58001 2.50 lbs. 1.63 4.81 2.72 0.25 2.21 0.25 3.13 1.19 0.50 1/4 NPT 2.31 1.50 0.50 0.59 0.16 0.26
1200 51200 4.00 lbs. 2.25 6.00 3.00 0.28 2.44 0.28 4.25 1.50 1.00 1/4 NPT 3.00 1.38 – 0.63 0.25 0.26
1200-E 51201 4.00 lbs. 2.25 6.00 3.00 0.28 2.44 0.28 4.25 1.50 1.00 1/4 NPT 3.00 1.38 0.69 0.63 0.38 0.26
Note: For use with pneumatic power only. 3-way air valve required to power unit (single-acting, spring return).

Model 801
This clamp is the newest in our line of pneumatic retracting clamps. ALSO AVAILABLE
The unit is completely enclosed, making it useful in heavy machining With Magnetic Ring Model 801-MR
applications. Its low and narrow profile allows it to be fit into tight, Switch Options Pages 13.1–13.4
confined areas. The clamping arm action extends out horizontally, and
then clamps down. The double-acting cylinder has built in restriction to
help control the speed of the cylinder.
58010
Model 801
Clamping Arm Configuration

x y
Retracted 0.38 –
Model 801010 Extended 1.00 0.85
(Arm Extension Option)
Clamped 1.00 0.65
Clamp Assembly with 1.12 Dia. Cylinder

Air/ PSI Standard Arm Extended Arm
40 45 lbs. 38 lbs.
50 67 lbs. 57 lbs.
60 98 lbs. 77 lbs.
70 125 lbs. 94 lbs.
80 164 lbs. 114 lbs.
90 192 lbs. 129 lbs.
100 216 lbs. 147 lbs.
110 238 lbs. 165 lbs.
Arm Extension & Set Screw

Model no. EDP no. a b c d e f g h j Dia. j1 Dia. k m
801010 58119 1.87 0.62 1.5 0.69 0.38 0.75 0.12 0.50 3/8-24 0.501 0.12 15º
Model no. EDP no. A B C D E F G H J K L M N Port Size
801 58010 1.62 8.42 1.62 1.50 1.32 5.37 2.84 1.00 #10 5.06 3.36 0.50 1.38 1/8 NPT

Models 870-2, 871-2
Power clamps with the roller and cam principle
Max.
Operating
Maximum Holding Pressure Clamping range at
Capacity Exerting Force end of arm in fully Cylinder Mechanical Port
Model no. [lbs.] @ 80 PSI [PSI] closed position Area advantage Weight Size
870-2 2,000 170 / 350 250 0.18 1.767 sq. in. 1.2 to 2.5.1 7.00 1/4 NPT
871-2 2,000 170 / 350 250 0.14 1.767 sq. in. 1.2 to 2.5.1 7.00 1/4 NPT
ALSO AVAILABLE These models use a roller and cam principle and provide the following benefits:
Switch Options Pages 13.1–13.4 Able to clamp work of inconsistent thickness and still maintain a locked condition.
Modular units 2-1/8" square can stack together for minimum distance between
clamping points.
Four-way mounting surface for full mounting flexibility.
Built-in pre-stop eliminates need to bottom out cylinder. Gives extra travel to
automatically compensate for wear. Also permits arm to be machined accurately
relative to mounting surface.
ing Clamp arms can be altered by welding, drilling, or machining to suit the application.
etic R
Magn ow A Standard mounting plate included.
N ature
n d a rd Fe
St a Application Note: Clamping range at end of arm in fully closed position:
Model 870-2 – 0.18"
Model 871-2 – 0.14"
Roller and cam mechanism Model 870 -2

of the Models 870-2 and 871-2 (clamping arm vertical
when in clamped position)
Standard equipment: Model 871-2

1 assembly plate, part no. 870116 (clamping arm
2 flow restrictor fittings horizontal when in
clamped position)
Sensors
Order separately:
sensors for -MR versions
(2 pieces required to sense both
the open and closed positions
of the cylinder)
Power clamp models 871-2 and 803 on a pressure test fixture

for vehicle gearbox lids

Models 870-2, 871-2
Power clamps with the roller and cam principle
L4
S max.
870-2
Opening-
~112°
Opening-
~126°
B2 L5
871-2
L4a 871-2
L5a S max.
(max. tolerance
compensation at the
clamp arm s end)
L8a
L8
870-2
L9a
L9 L3
D1
B7a
B2a B7 L12
L1
L13
Assembly plate (870116)

(standard)
L10 B1
b b1
øD
a1 A1
Model no. a a1 A1 b b1 B1 B2 B2a B7 B7a øD D1 L1 L3 L4 L4a L5 L5a L8 L8a L9 L9a L10 L12 L13
870-2 1.75 2.19 2.13 1.00 1.75 2.13 4.25 – 1.75 1.75 0.25 0.28 9.58 3.38 1.00 – 0.62 – 1.50 1.00 1.00 1.00 0.78 1.00 4.50
871-2 1.75 2.19 2.13 1.00 1.75 2.13 – 3.31 1.75 1.75 0.25 0.28 9.96 3.38 – 1.00 – 0.76 1.50 1.00 1.00 1.00 0.78 1.00 4.88

Standard Pneumatic Clamps Notes

Pneumatic Swing Clamps
New products
NEW NEW
035 Series 89R Series
page 12.4 page 12.16
NEW
9500 Series
page 12.22

Pneumatic Swing Clamps Product group – pneumatic swing clamps
Model Model
Series no. Model no. Page Series no. Model no. Page
035-125-145 12.5 8000 8015 12.14
035-125-160 8016
035-125-190 8015-LA
035-125-245 8016-LA
035-125-260
035-125-290
035-125-300
035-225-145 12.5 8100 8115

035-225-160 8116
035-225-190 8115-LA
035-225-245 8116-LA
035-225-260
035-225-290
035-225-300
035-132-145 12.6 8200 8215

035-132-160 8216
035-132-190 8215-LA
035-132-245 8216-LA
035-132-260
035-132-290
035-132-300
035-232-145 12.6 8300 8315

035-232-160 8316
035-232-190 8315-LA
035-232-245 8316-LA
035-232-260
035-232-290
035-232-300
035-140-145 12.7 8400 8415

035-140-160 8416
035-140-190 8415-LA
035-140-245 8416-LA
035-140-260
035-140-290
035-140-300
035-240-145 12.7 89R 89R20-010-1 12.16

035-240-160 89R32-010-1
035-240-190 89R40-010-1
035-240-245 89R40-025-1
035-240-260 89R50-025-1
035-240-290 89R63-025-1
035-240-300
035-150-145 12.8 8JG 8MA-084-1 89R20-010-1 Blank Arm 12.18

035-150-160 8MA-085-1 89R32-010-1
035-150-190 8MA-086-1 89R40-010-1
035-150-245 8MA-087-1 89R40-025-1
035-150-260 8MA-088-1 89R50-025-1
035-150-290 8MA-089-1 89R63-025-1
035-150-300
035-250-145 12.8 8MA 8MA-092-1 89R20-010-1 Body Mount 12.18

035-250-160 8MA-094-1 89R32-010-1 Flange
035-250-190 8MA-095-1 89R40-010-1
035-250-245 8MA-095-1 89R40-025-1
035-250-260 8MA-096-1 89R50-025-1
035-250-290 8MA-097-1 89R63-025-1
035-250-300
Note: See pages 12.6 & 9.1 for accessories

Product group – pneumatic swing clamps
Model
Series no. Model no. Used on Page
8JG 8JG-215-1 89R20-010-1 Standard 12.19

8JG-217-1 89R32-010-1 Clamp Arm
8JG-218-1 89R40-010-1
8JG-218-1 89R40-025-1
8JG-219-1 89R50-025-1
8JG-220-1 89R63-025-1
8MA 8MA-061-1 89R20-010-1 End Mount 12.19

8MA-063-1 89R32-010-1 Flange
8MA-064-1 89R40-010-1
8MA-064-1 89R40-025-1
8MA-065-1 89R50-025-1
8MA-066-1 89R63-025-1
SME SME-3-LED 89R20-010-1 Magnetic 12.20

SME-3-LED 89R32-010-1 Sensors
SME-3-LED 89R40-010-1
SME-3-LED 89R40-025-1
SME-3-LED 89R50-025-1
SME-3-LED 89R63-025-1
8MA 8MA-018-1 89R20-010-1 Mounting Feet 12.20

8MA-020-1 89R32-010-1
8MA-021-1 89R40-010-1
8MA-021-1 89R40-025-1
8MA-022-1 89R50-025-1
8MA-023-1 89R63-025-1
9530 12.22
9540

StrongHold SELECT
Pneumatic Swing Clamps Pneumatic Clamps
NEW
Pneumatic Swing/Pull Clamps are for applications that require a lighter touch than the forces generated by
hydraulic powered clamps.
DE-STA-CO’s line of pneumatic swing/pull clamps are fast acting and can generate from 50 up to 430
lbs. of clamping force from shop air.
035-163-190 PSI: 14.5 29.0 58.0 87.0 116.0 145.0

20 50/63 mm – Bore 7.87"
32/40 mm – Bore 5.91"
25 mm – Bore Allowable Bending Moment

10 3.94"
8 3.15" Use the arm length and operating pressure
within this graph for allowable bending
6 2.36"
moment loaded piston rod.
4 1.57" When arm length is 8 cm (3.15"), pressure
Operating should be less than:
Range
25 mm Bore: 4.5 BAR (65 PSI)
2 .79" 32/40 mm Bore: 5.5 BAR (80 PSI)
50/63 mm Bore: 8 BAR (116 PSI)
035-125-190
4.5 5.5 8
1 2 4 6 10 See Page 12.10 –
Operating Pressure (BAR) Calculation for Moment
of Inertia
2 2.8 3.9 5.9 7.9
in/s in/s in/s in/s in/s
50/63 mm – Bore 8.85 x10-2 in.lb.sec2
Mass Moment of Inertia
10 -2 -3 2
6 53.1 x10 in.lb.sec When the arm is long and heavy, damage of
-3 2
4 35.4 x10 in.lb.sec internal parts may be caused due to inertia.
Moment of Inertia (kg•m2)
32/40 mm – Bore Use the inertia moment and cylinder speed

-3 2
2 17.7 x10 in.lb.sec
within this graph based on arm requirements.
035-250-290 10 -3
-3
8.85 x10 in.lb.sec
2
-4 2
-4 2 When arm’s inertia is 3 X 10 kg•m
6 25 mm – Bore 53.1 x10 in.lb.sec -3 2
-4 2 (2.7 X 10 in-lb•sec ) cylinder speed
4 35.4 x10 in.lb.sec
3 should be less than:
2 17.7 x10-4 in.lb.sec2
25 mm Bore: 65 mm/s (2.6 in/s)
10 -4 8.85 x10-4 in.lb.sec2 32/40 mm Bore: 150 mm/s (5.9 in/s)
Operating
53.1 x10-5 in.lb.sec2
-3
6 Range When arm’s inertia is 1 X 10 kg•m2
4 35.4 x10-5 in.lb.sec2 -3
(8.85 X 10 in-lb•sec2 ) cylinder speed
2 17.7 x10-5 in.lb.sec2 should be less than 50/63 mm Bore:
150 mm/s (5.9 in/s)
10 -5 8.85 x10-5 in.lb.sec2
035-225-190 50 (65) 100 150 200

70
Cylinder Speed (mm/s)
Swing Clamp Order Information Bore Swing Swing

035 - 125 - 190 Style Size Direction Angle
1 – Threaded Body 25 mm 1 – Right 90°
Family Style Swing 2 – Bottom Flange 32 mm 2 – Left
Bore Direction
Size
40 mm
Swing
(mm)
Angle
50 mm
63 mm

StrongHold SELECT

Pneumatic Swing/Pull Clamp – 25mm Bore
NEW
DE-STA-CO’s line of Pneumatic Swing/Pull Clamps is designed for applications not requiring
hydraulic power. The fast acting DE-STA-CO clamp can generate up to 50 lbs. of clamping
force from shop air. DE-STA-CO pneumatic clamps are ideal for a wide variety of
manufacturing and assembly operations.
Features:
Swing motion available in 90 degrees
Four (4) styles of arms
Double-locked arm design is bolted to piston shaft and around shaft
diameter for extra rigidity
Double-acting design
Dual-seal design with a wiper seal to keep contaminants out
Max. Operating Pressure: 100 PSI
2 Long clamping stroke accommodates a wide thickness of materials
Clamping Annulus Area: .522 in
Clamping force is adjustable using regulated air
Normal Operating Pressure: 40 – 80 PSI
Cylinder Operating: Double-acting Smooth swing motion for better operating performance
H
N Rod Force
Standard Arm x.6 G
L
Long Arm x.3
J 70
(31.751)
G H
Clamping Force (lbs/kg)
60
(27.215)
D
50 N
S (22.679) L
A
B 40
P
C
(18.143) J
F Q
30
(13.607)
D
20
(9.071) E
035-125-000 A S
M
10 B
(4.535)
E C
R Q
40 50 60 70 80 90 100 U
2.757 3.447 4.136 4.826 5.515 6.205 6.894
R
Operating Pressure PSI/BAR T 035-225-000
M
Imperial Dimensions (inches)
A B C D E F G J øK M N P
Total Clamping Unclamped Clamped Body Clamp Unclamp Threaded Flange H Thread Hole L Body Shaft Thread
Cat. no. Stroke Stroke Position Position Height Port Port Body Mount Flange Depth Dia. Thread Size Dia. Dia. Size Q R S
035-125-190
1.036 0.531 4.36 3.324 2.76 1.5 – – – 1.418 1 ⁄2-16 UN 2.25 0.35 4.575
1
035-125-290
10-32 UNF 10-32 UNK 0.665 1/4-20 UNC 0.551
035-225-190
1.051 0.511 4.23 3.215 2.62 – 1.22 1.577 1.75 1.377 – 2.1 0.5 4.435
035-225-290
See page 12.9 for available arms

StrongHold SELECT
Pneumatic Swing Clamps Pneumatic Swing/Pull Clamp – 32mm Bore
NEW
hydraulic power. The fast acting DE-STA-CO clamp can generate up to 90 lbs. of clamping
force from shop air. DE-STA-CO pneumatic clamps are ideal for a wide variety of
manufacturing and assembly operations.
Features:
2 Long clamping stroke accommodates
Clamping Annulus Area: .935 in
a wide thickness of materials
Cylinder Operating: Double-acting Clamping force is adjustable using
regulated air
Smooth swing motion for better H
operating performance G
N L
Rod Force
J G H
120 Standard Arm x.5
(54.431) Long Arm x.25
D
100
(45.359)
S 80
A (36.287) N L
P
B 60
F Q C (27.215) J
40
(18.143)
D
20
(9.071) E S
035-132-000 A
B
M 50 60 70 80 90 100
40 3.447 C
2.757
4.826
4.136
6.205
5.515 6.894 Q
R
U
Operating Pressure PSI/BAR
R 035-232-000
E M
Cat. no. Stroke Stroke Position Position Height Port Port Body Mount Flange Depth Dia. Thread Size Dia. Dia. Size Q R S T U
035-132-190
1.132 0.565 5.00 3.868 3.115 1.72 – – – 1.788 17⁄8-16 UN 2.625 0.45 5.165 – –
035-132-290
1/8 NPT 1/8 NPT 0.575 5/16-18 UNC 0.630
035-232-190
1.055 0.488 4.707 3.652 2.8 – 1.732 2.13 0.253 1.97 – 2.325 0.57 4.85 0.57 0.907
035-232-290

StrongHold SELECT

Pneumatic Swing/Pull Clamp – 40mm Bore
NEW
hydraulic power. The fast acting DE-STA-CO clamp can generate up to 160 lbs. of
clamping force from shop air. DE-STA-CO pneumatic clamps are ideal for a wide variety
of manufacturing and assembly operations.
Features:
2 Long clamping stroke accommodates a wide
Clamping Annulus Area: 1.636 in
thickness of materials
Cylinder Operating: Double-acting Clamping force is adjustable
using regulated air
Smooth swing motion for
better operating performance H
G
Rod Force
N L (72.574)
Long Arm x.25
G H
140
(63.502)
J
120
(54.431)
D
100 N L
(45.359)
S
P A
80 J
(36.287)
B
F Q C 60
(27.215) D
40 S
(18.143) A
035-140-000 E B
M 20 C
(5.071)
Q
E R
U
50 60 70 80 90 100
40 3.447 4.826 6.205
2.757 4.136 5.515 6.894
R
Operating Pressure PSI/BAR M
T
035-140-190
1.197 0.630 5.37 4.04 3.275 1.879 – – – 2.16 2 ⁄4-16 UN 2.8 0.625 5.39
1
– –
035-140-290
1/8 NPT 1/8 NPT 0.7 5/16-18 UNC 0.630
035-240-190
1.091 0.524 4.981 3.89 2.95 – 1.889 2.29 0.253 2.16 – 2.5 0.65 5.00 0.65 1.027
035-240-290

StrongHold SELECT
Pneumatic Swing Clamps Pneumatic Swing/Pull Clamp – 50mm Bore
NEW
hydraulic power. The fast acting DE-STA-CO clamp can generate up to 250 lbs. of
clamping force from shop air. DE-STA-CO pneumatic clamps are ideal for a wide variety
of manufacturing and assembly operations.
Features:
Max. Operating Pressure: 100 PSI Dual-seal design with a wiper seal to keep contaminants out
2
Clamping Annulus Area: 2.556 in Long clamping stroke accommodates a wide thickness of materials
Normal Operating Pressure: 40 – 80 PSI Clamping force is adjustable
Cylinder Operating: Double-acting H
using regulated air
G
Smooth swing motion for
better operating performance
N L
Rod Force
G H
Long Arm x.25
J 280
D
240
S N L
A
B 200
P
F Q C
160 J
D
120
S
M A
80 B
(36.287) E C
R Q
E 40 R
(18.143) U
M
50 60 70 80 90 100
40 3.447
035-150-000 2.757
4.826
4.136
6.205
5.515 6.894
T 035-250-000
Operating Force PSI/BAR
035-150-190
1.181 0.553 5.36 4.179 3.475 2.0 – – – 2.4 21⁄2-16 UN 2.95 0.7 5.75 – –
035-150-290
1/8 NPT 1/8 NPT 1.0 3/8-16 UNC 0.787
035-250-190
1.134 0.506 5.061 3.927 3.15 – 2.165 2.68 0.337 2.365 – 2.7 0.65 5.44 0.65 1.025
035-250-290

StrongHold SELECT

Pneumatic Swing/Pull Clamp Arms
L
Standard Arm
036-000-01
B Part no. A B C D E F G H J K L
F GØ D
036-551-01 2.380 0.750 0.313 1.016 0.551 1
⁄4-20 UNC 0.265 0.400 1.361 0.625 1
⁄4-20 UNC-2B
036-630-01 3.100 0.750 0.375 1.105 0.630 5

⁄16-18 UNC 0.344 0.500 2.000 0.750 ⁄16-18 UNC-2B
5
H K 036-787-01 4.000 1.000 0.500 1.307 0.787 3

⁄8-16 UNC 0.390 0.700 2.750 1.000 3
⁄8-16 UNC-2B
C ØE
Extended Arm
F GØ
D B 036-000-02
Part no. A B C D E F G H J K
036-551-02 3.380 0.750 0.313 1.016 0.551 1

⁄4-20 UNC 0.265 0.625 2.361 0.400
C ØE K
H
036-630-02 4.725 0.750 0.375 1.105 0.630 5
⁄16-18 UNC 0.344 0.750 3.625 0.500
036-787-02 6.360 1.000 0.500 1.307 0.787 3
⁄8-16 UNC 0.390 1.000 5.000 0.700
J J
Dual Stationary Arm
H
036-000-04
Part no. A B C D E F G H J
B
F 036-551-04 3.28 0.750 0.625 0.313 0.551 1
⁄4-20 UNC 0.265 0.400 1.36
GØ
036-630-04 4.72 0.750 0.750 0.375 0.630 5
⁄16-18 UNC 0.344 0.500 2.00
H 036-787-04 6.00 1.000 1.000 0.500 0.787 3

⁄8-16 UNC 0.390 0.700 2.75
ØE C
D

StrongHold SELECT
Pneumatic Swing Accessories Pneumatic Clamp Accessories
Flat-Tip Bonded Neoprene

Cap Spindle Pneumatic Clamp
Part no.
202208
L
1.63
L1
1.13
D
0.66
Thread (G)
1/4-20
Jam Nut
215208 2.13 1.63 0.66 1/4-20
c
225208 2.25 1.56 0.75 5/16-18
507208 3.00 2.25 0.75 5/16-18
240208 3.25 2.25 0.88 3/8-16
527208 3.50 2.50 0.88 3/8-16
235208 5.75 4.75 0.88 3/8-16
Hex-Head Fully Threaded Carbon

Steel Spindle D A
Part no. L L1 D Thread (G) B
G 202203 3.13 3.00 7/16 1/4-20
205203 1.88 1.69 7/16 1/4-20

L L1
461203 1.00 0.81 1/2 5/16-18 Clamp Dim Dim Dim Dim
Part no. Used On A B C D
441203 1.94 1.75 1/2 5/16-18
207203 2.75 2.50 1/2 5/16-18 051-150-160 035-125-XXX 2.000 0.38 0.275 1-1/2-16 UN
D 491203 1.50 1.25 9/16 3/8-16 051-187-160 035-132-XXX 2.625 0.38 0.312 1-7/8-16 UN
210203 3.00 2.75 9/16 3/8-16 051-225-160 035-140-XXX 3.000 0.50 0.312 2-1/4-16 UN
240203 4.25 4.00 9/16 3/8-16 051-250-160 035-150-XXX 3.250 0.50 0.312 2-1/2-16 UN
527203 5.25 5.00 9/16 3/8-16 051-312-160 035-163-XXX 3.875 0.50 0.375 3-1/8-16 UN
Calculation for Mass Moment of Inertia

lb-sec 2
2
I: Mass Moment of Inertia (kg • m2)(lb-in-sec ) m: Load Mass (kg)( )
in
w(lbf) w = weight
NOTE: m=
g in/sec2 g = 386 in/sec2 a1 b 4. Thin Rectangular Plate
a2 Position of rotary axis: Vertical to the plate
a1
1. Thin Bar and through the end
Position of rotary axis: Vertical to the bar 2 2 2 2
a2 and through the end I = m1 • 4a1 +b + m2 • 4a2 +b
2 2 12 12
I = m1 • a1 + m2 • a2
3 3
b 5. Thin Rectangular Plate
Position of rotary axis: Through the center
2. Thin Bar of gravity and vertical to the plate
Position of rotary axis: Vertical to the bar a
a 2 2
and through the center of gravity I = m • a +b
2
12
I=m• a
12
a2 r 6. Load at the End of
3. Thin Rectangular Plate a1
Lever Arm
a b m2
2 2
I = m1 • a1 + m2 • a2 + K
Position of rotary axis: Parallel to side b
and through center of gravity
2 m1 3
I=m• a 2
12 I = m2 • 2r
5

Model Series 8000, 8100, 8200, 8300, 8400

Quick, Clean & Economical
DE-STA-CO’s 8400 Series joins the 8000/8100 and 8200/8300 Series,
rounding out a versatile, time-saving line of swing cylinders. Ideal for
installations where hydraulic power is not suitable, these pneumatic power
clamps from DE-STA-CO have all the same quick-acting advantages and can
produce up to 160 lbs. clamping force from shop line air pressure (see chart).
These double-acting clamps are red anodized aluminum with either a Series 8000
threaded body that permits three mounting options, or a block-style
mounting body.
Intended for quick clamping in secondary manufacturing operations on
metallic or non-metallic products. These clamps offer a combination of
features that makes them uniquely adaptable to such applications, as Series 8011
welding and assembly operations. Spindles are included.
Every DE-STA-CO pneumatic swing clamp now is equipped with sensing
capabilities as a standard feature. See page 12.7 for details.
90° swing of clamping arm minimizes obstruction in the workspace and
makes loading or unloading of parts easy.
1/2" clamping stroke (vertical arm travel) for Series 8200/8300 and 3/8"
clamping stroke for Series 8000/8100 allows wide variation in part size.
The clamp adjusts automatically on every cycle.
New Series 8400, designed for mid-range applications, features 1/2" Series 8100
clamping stroke.
Improved design features additional mounting screws to more effectively
secure clamp housing.
Internal piston design features new seal technology.
Series 8200
Quick swing-and-clamp movement reduces cycle times in
your operation.
Pneumatic operation is economical and clean, and allows precise control
and monitoring of the clamping force.
Multiple mounting options allow the clamp to be adapted to the fixture for
the best use of space and to minimize installation time.
Clamping force is adjustable across a wide range: 20 lbs. to 160 lbs.
Clamp exerts just the force your operation requires without deforming
delicate parts.
Broad operating temperature range of -40° F to 250° F allows
installations in extreme environments. Series 8300
Multiple mounting and arm options allow the clamp to be adapted to the
fixture for the best use of space and to minimize installation time.
Maximum inlet pressure 130 PSIG.
Series 8400
NOTE: See pages 12.15 & 9.1 for accessories

Model Series 8000, 8100, 8200, 8300, 8400
Cylinder Specifications
Effective Effective Clamp Unclamp Application Note:
Clamping Unclamping Volume Volume When using a T-Arm, the clamping force at each
Series no. Bore [in.] Red [in.] Stroke [in.] Area [sq. in.] Area [sq. in.] [cu. in.] [cu. in.] end of the arm is equal if the arm length of each
8000 0.750 0.438 0.85 0.291 0.442 0.25 0.38 end is equal. (The clamp force at each clamping
8100 0.750 0.438 0.85 0.291 0.442 0.25 0.38 point = 1/2 rod force)
8200 1.500 0.500 1.28 1.571 1.767 2.01 2.26
8300 1.500 0.500 1.28 1.571 1.767 2.01 2.26
8400 1.188 0.500 1.28 0.911 1.108 1.17 1.42
Force Data (lbs.)

8000/8100 8000/8100 8000/8100 8400 8400 8400 8200/8300 8200/8300 8200/8300
with Long with Standard Straight Pull with Long with Standard Straight Pull with Long with Standard Straight Pull
Arm Arm Arm Arm Arm Arm
PSI (801529) (801528) (Rod Force) (821513) (841512) (Rod Force) (821513) (821512) (Rod Force)
30 4 8 9 20 25 27 24 27 47
40 5 10 12 29 32 36 34 38 63
50 7 13 15 34 41 46 44 48 79
60 8 16 17 42 47 55 55 57 94
70 10 18 20 49 55 64 65 67 110
80 12 22 23 55 62 73 75 80 126
90 13 25 26 60 68 82 83 89 141
100 15 27 29 65 76 91 93 99 157
110 17 30 32 74 82 100 105 112 173
120 18 32 35 80 91 109 114 121 189
130 20 35 38 87 98 118 124 131 204
Swing Cylinder Rotation: Frame of reference for specifying rotation is the clamp arm viewed from above during the clamping stroke.
A right-hand unit rotates clockwise and then clamps down; a left-hand unit rotates counter-clockwise, and then clamps down.
Note: Tolerance on arm swing position is ±3˚.
8000, 8200, 8400 Mounting Options 8100, 8300 Mounting Options

(8200 Only) (8200 Only)
Threaded body in a Cylinder body passes Optional mounting block

tapped hole. Position is through a clearance may be used above or
locked by a single cap hole.Three mounting below the work surface. Can be mounted to the side or front of Mounted to the top of the work surface
screw into a tapped hole screws pass through the Clamp height is easily the fixture, or mounted back to back for through the two mounting holes in the
in fixture. top flange into holes reset. multiple clamping operations. bottom of unit.
tapped in the fixture.

Model Series 8000, 8100, 8200, 8300, 8400
SERIES 8000, 8400 SERIES 8200
A
C Bore for “G” Socket
A
(Unclamped/Open Position)
Head Cap Screws –
3 holes C
B on a “H” B.C. Unclamp B
C Port
Clamp Port
T Unclamp Port
F E D Thread
Clamp
K Port
T D Thread
F E
K
SERIES 8100 SERIES 8300

A A
(Unclamped/Open Position)
B D
D B
E
E L H
J H K L Q
Q J K
F N F
G
G
M C
G M C
G
P
T
4 Mtg. Holes F 4 Mtg. Holes N P
T for “R” Socket Clamp Unclamp for “R” Socket
F Head Cap Screws Head Cap Screws
Port Port Clamp Unclamp
S Port Port
S
Dimensions
Series no. A B C D E F G H J K L M N P Q R S T Port Size

8000 4.88 2.87 0.62 1 1/8-16 1.25 – – – – 1.44 – – –– –– –– –– –– 0.31 #10-32
8100 4.88 3.50 1.25 1.25 0.53 0.47 0.47 1.00 1.12 1.00 0.25 1.00 1.57 0.35 0.20 #10 1.44 0.31 #10-32
8200 6.36 3.36 0.87 2 1/4-12 3.00 1.16 0.25 2.66 – 2.38 – – – – – – – 0.38 1/8 NPT
8300 6.36 4.27 3.00 2.00 1.00 0.72 1.22 2.25 0.53 2.37 0.44 2.25 1.16 0.65 0.40 0.33 2.38 0.38 1/8 NPT
8400 6.14 3.17 0.88 1 3/4-12 2.13 0.98 – – – 1.94 – – – – – – – 0.38 1/8 NPT

Model Series 8000, 8100, 8200, 8300, 8400
Arm Spindle Travel Dur. Vertical Maximum Weight
Model no. EDP no. Swing Supplied Supplied Rotation Clamp Stroke Arm Length [lbs]
8015 58015 RH 801528 305203 0.466 0.38 2.25 1.00
8016 58016 LH 801528 305203 0.466 0.38 2.25 1.00
8015-LA* 58017 RH OPTIONAL – 0.466 0.38 2.25 1.00
8016-LA* 58018 LH OPTIONAL – 0.466 0.38 2.25 1.00
8115 58115 RH 801528 305203 0.466 0.38 2.25 1.00
8116 58116 LH 801528 305203 0.466 0.38 2.25 1.00
8115-LA* 58117 RH OPTIONAL – 0.466 0.38 2.25 1.00
8116-LA* 58118 LH OPTIONAL – 0.466 0.38 2.25 1.00
8215 58215 RH 821512 485203-AL 0.75 0.50 3.00 2.00
8216 58216 LH 821512 485203-AL 0.75 0.50 3.00 2.00
8215-LA* 58217 RH OPTIONAL – 0.75 0.50 3.00 2.00
8216-LA* 58218 LH OPTIONAL – 0.75 0.50 3.00 2.00
8315 58315 RH 821512 485203-AL 0.75 0.50 3.00 2.00
8316 58316 LH 821512 485203-AL 0.75 0.50 3.00 2.00
8315-LA* 58317 RH OPTIONAL – 0.75 0.50 3.00 2.00
8316-LA* 58318 LH OPTIONAL – 0.75 0.50 3.00 2.00
8415 58415 RH 821512 485203-AL 0.75 0.50 3.00 1.50
8416 58416 LH 821512 485203-AL 0.75 0.50 3.00 1.50
8415-LA* 58414 RH OPTIONAL – 0.75 0.50 3.00 1.50
8416-LA* 58420 LH OPTIONAL – 0.75 0.50 3.00 1.50
*Clamp provided less arm. Customers to select arm as an option.

See page 13.2 for additional switches.
Series 8000 Series 8100 Series 8200 Series 8300 Series 8400

Pneumatic Swing Accessories
8000 Series
H Mounting Block
F Use With
Part no. EDP no. Series no. A B C D E F H
A
B E (4 Places) 801553 58033 8000 1.38 0.69 1.08 0.54 0.20 1-1/8-16 0.50
D 821553 58233 8200 2.50 1.25 2.12 1.06 0.28 2-1/4-12 0.50
C
841550 58418 8400 2.00 1.00 1.60 0.80 0.28 1-3/4-12 0.50
Arm
Use With
A Part no. EDP no. Series no. A B C D E F G
F
E
801528 58058 8000, 8100 1.75 1.12 0.39 0.27 0.62 10-32 –
B 801529 58059 8000, 8100 2.87 2.25 0.39 0.27 0.62 10-32 –
C
D 821512 58252 8200, 8300 2.75 2.00 0.75 0.37 0.75 3/8-16 –
821513 58253 8200, 8300, 8400 3.75 3.00 0.75 0.37 0.75 3/8-16 –
841512 58417 8400 2.31 1.56 0.75 0.37 0.75 3/8-16 –
T-Arm
Use With
E Part no. EDP no. Series no. A B C D E F G
F
B B 801530 58053 8000, 8100 2.88 1.12 (2) 0.39 0.27 (2) 0.62 10-32 (2) –
A
C D
801531 58051 8000, 8100 5.12 2.25 (2) 0.39 0.27 (2) 0.62 10-32 (2) –
821554 58254 8200, 8300 4.75 2.00 (2) 0.75 0.37 (2) 0.75 3/8-16 (2) –
821555 58251 8200, 8300 6.75 3.00 (2) 0.75 0.37 (2) 0.75 3/8-16 (2) –
Blank Arm
E
Use With
A F Part no. EDP no. Series no. A B C D E F G
B
D 801532 58052 8000, 8100 1.37 1.00 0.39 0.25 0.62 10-32 (2) 0.62
C
821556 58256 8200, 8300 1.50 1.06 0.75 0.37 0.75 1/4-20 (2) 0.75
G

Pneumatic Swing Clamps 89R Series – Features
NEW
Your requirements Technical data
Compact – ideal for restricted space applications Cylinder diameter:
Access to the workpiece possible from above 20 mm, 32 mm, 40 mm, 50 mm, 63 mm
High flexibility in the application – various “add on” options Clamping strokes: 10 mm, 25 mm, 50 mm
Reduced exerting forces are sufficient in order to hold the (upon request for diameters 40 mm, 50 mm and 63 mm)
workpiece securely Exerting forces: 20 lbs. to 242 lbs. at 80 PSI
The solution Operating instruction
The new pneumatic swing clamps from DE-STA-CO A PDF file of the operating instruction is available
You can also download it from our homepage on www.destaco.com
Special features
Mounting flexibility by means of body mount flange, end mount Practical tips
flange, mounting feet (accessories) Rotational movement of clamp arm should not be restricted
Easily adjustable left-hand, right-hand, straight pull actions Clamping operation should not occur during rotation of the
(20 mm diameter not adjustable) clamp arm
Double-acting cylinder Remove the clamp arm from the piston rod by tapping only from
Magnetic ring on piston with sensors available below and not from the side
Lightweight aluminum body Clamp arm assembly
Piston rod, hard-chrome plated See operating instructions
Rod seal and wiper built in
Clamp can produce several million cycles
Operation with oil-free air
Adjustment of the swivel direction
1. Unscrew the guide bolt
2. Adjust the piston rod until the required swivel groove (right, left,
straight) is lined up with the hole in the body
3. Insert guide bolt and tighten it
4. Take care that the seal ring is seated correctly

89R Series – Specifications
NEW
500
S = Total stroke
S1 = Travel during
rotation 450
S2 = Vertical clamp
ød1 S =stroke
Gesamthub
S1= Schwenkhub 400
ød2
S2= Spannhub 89R63
S1
M1
h6
h2
S
h1 350
S2
h7
300
ød3
M3
h3
h4
250
[lbs.]
89R50
M3
h8
200
h5
M2
150
l1 Schwenkbereich 90°*links
Rotation range 90°-+5° 89R40
l2 Standardeinstellung
(standard adjustment)
werkseitig
l3 100
l4 89R32
Schwenkbereich
50
Rotation range
l6
l5
90° +-rechts
90° 5°right
89R20
1.200
40 60 80 100 120 140
[PSI]
Exerting force diagram
Total stroke Travel during Vertical clamp Operating pressure Piston dia.
rotation
S S1 S2 min. max. Exerting force S1 Weight
Model no. [mm] [mm] [mm] PSI PSI at 80 PSI [mm] [lbs.]
89R20-010-1 21.0 11.0 10 20 20 0.66
89R32-010-1 28.0 18.0 10 62 32 1.32
89R40-010-1 31.5 21.5 10 94 40 2.09
30 145
89R40-025-1 46.5 21.5 25 94 40 2.43
89R50-025-1 52.0 27.0 25 154 50 3.97
89R63-025-1 58.5 33.5 25 242 63 6.17
Model no. ød1 ød2 ød3 h1 h2 h3 h4 h5 h6 h7 h8 l1 l2 l3 l4 l5 l6 M1 M2 M3

89R20-010-1 18 10 4.6 19.8 8 105.5 66.0 13.2 15 14 14 39.5 35.0 22 16.0 22 32 M5 M6 M5
89R32-010-1 22 12 5.5 23.7 11 125.0 83.0 17.5 17 16 16 60.0 54.0 36 24.0 32 45 M6 M8 G1/8
89R40-010-1 30 16 5.5 25.0 11 140.0 95.0 21.0 17 25 25 66.0 60.0 40 27.3 40 54.5 M8 M8 G1/8
89R40-025-1 30 16 5.5 25.0 11 170.0 125.0 21.0 17 25 25 66.0 60.0 40 27.3 40 54.5 M8 M8 G1/8
89R50-025-1 40 18 7.4 31.4 11 194.5 137.0 26.7 25 25 25 78.5 72.5 50 32.5 50 65 M10 M10 G1/8
89R63-025-1 45 20 9.3 33.0 15 211.5 154.5 26.5 25 25 25 95.0 88.0 62 40.0 62 80 M10 M12 G1/4

Pneumatic Swing Accessories Blank Arm
Product features
l
For attaching custom made clamp arms
l1
360° rotatable arm
l2
Made of aluminum
h2
d1
h
b1 h1
b
Order no. Use with Clamp l1 b Weight
Adaptor Model no. l +_0,2 l2 h h1 M1 +_0,2 b1 [lbs./pc]
8MA-084-1 89R20-010-1 40 28 16 27.8 7 15 5.5 – 0.03
8MA-086-1 89R32-010-1 50 35 20 35.7 9 20 5.5 – 0.08
8MA-087-1 89R40-010-1 50 38 25 40.0 12 25 5.5 14 0.11
8MA-087-1 89R40-025-1 50 38 25 40.0 12 25 5.5 14 0.11
8MA-088-1 89R50-025-1 60 45 30 48.4 15 30 7.0 15 0.19
8MA-089-1 89R63-025-1 65 48 32 53.0 18 35 9.0 18 0.28
Body Mount Flange

Product features
For use as a model recessed to the fixture L1 B1
L3 B2
Variable height adjustment
Can be used with end position sensors
Made of aluminum
H1
L4
L2
D1
(x4)
Order no.
Body Mount Use with Clamp Weight
Flange Model no. L1 L2 L3 L4 D1 B1 B2 H1 [lbs./pc]
8MA-092-1 89R20-010-1 57 55 47 24 5.5 15 – – 0.22
8MA-094-1 89R32-010-1 81 75 70 40 6.6 20 12 25 0.44
8MA-095-1 89R40-010-1 81 80 70 45 6.6 25 17 28 0.55
8MA-095-1 89R40-025-1 81 80 70 45 6.6 25 17 28 0.55
8MA-096-1 89R50-025-1 101.5 100 85.5 50 9 25 17 37 0.88
8MA-097-1 89R63-025-1 122 120 104 68 11 30 20 38 1.43

Standard Clamp Arm
Product features
l For standard use
l2 l1 360° rotatable arm
Spindle is an accessory part
h
(see manual clamp accessories section for spindle option
h1
M1 beginning page 9.1)
Made of aluminum
b
Order no. Used with Clamp Weight

Clamping Arm Model no. l l1 l2 h h1 M1 b [lbs./pc]
8JG-215-1 89R20-010-1 67 52 7 15 27.8 M6 15 0.08
8JG-217-1 89R32-010-1 80 60 10 20 35.7 M8 20 0.14
8JG-218-1 89R40-010-1 95 70 10 25 40.0 M8 25 0.28
8JG-218-1 89R40-025-1 95 70 10 25 40.0 M8 25 0.28
8JG-219-1 89R50-025-1 106 80 10 30 48.4 M8 30 0.42
8JG-220-1 89R63-025-1 120 90 12 35 53.0 M10 35 0.66
End Mount Flange

d1
Product features
d2 Can be mounted on bottom side and top side
of clamp
h
Made of aluminum
h1
l
l1
l2
b1
b
Order no.
End Mount Used with Clamp l1 b1 Weight
Flange Model no. h h1 d1 d2 l +_0,2 b +_0,2 [lbs./pc]
8MA-061-1 89R20-010-1 10 7 11 6.6 65 50 32 18 0.07
8MA-063-1 89R32-010-1 12 7 11 6.6 80 64 50 32 0.20
8MA-064-1 89R40-010-1 12 7 11 6.6 100 80 55 40 0.29
8MA-064-1 89R40-025-1 12 7 11 6.6 100 80 55 40 0.29
8MA-065-1 89R50-025-1 15 9 15 8.5 120 100 65 45 0.46
8MA-066-1 89R63-025-1 15 9 15 8.8 130 110 80 60 0.66

Pneumatic Swing Accessories Magnetic Sensors
Product features
Switch groove located on 3 sides of the cylinder
Continuously adjustable by means of dovetailed groove
Sensors for magnetic field workpiece control system

(SME-3-LED) with integrated protective
circuit and light-emitting diode (PNP output)
b1
l4
Technical Data
Medium: magnetic field and electric current
Type of design: electrical signal transmitter for contactless
position indication
Order no.
Type of attachment: clamping in longitudinal keyway
Magnetic Used with Clamp Weight
Connection: 3-core cable, 2.5 m, max. 10 W/500 Sensors Model no. b1 l4 [lbs./pc]
mA/12-27 V AC/DC
Type of protection SME-3-LED 89R20-010-1 31.0 10.5 0.09
in accordance with SME-3-LED 89R32-010-1 37.5 10.5 0.09
DIN 40050: IP 66
SME-3-LED 89R40-010-1 42.3 10.5 0.09
Temperature range: fixed cable installation
-20º to + 60° C, SME-3-LED 89R40-025-1 42.3 10.5 0.09
moveable cable installation SME-3-LED 89R50-025-1 47.5 10.5 0.09
-5º to + 60° C
SME-3-LED 89R63-025-1 55.0 10.5 0.09
Material: housing GD-Mg, cable PVC
Mounting Feet
Product features
Can be mounted on bottom side or front side
Can be mounted on 4 sides of the cylinder
Made of aluminum
l1
b d1
l
b1 h1
h
Order no. Used with Clamp Weight

Mounting Feet Model no. h h1 d1 l l1 b b1 [lbs./pc]
8MW-018-1 89R20-010-1 137.5 22 7 4 16 22 35 0.08
8MW-020-1 89R32-010-1 166.0 28 7 4 18 35 50 0.15
8MW-021-1 89R40-010-1 181.0 28 7 5 24 40 55 0.22
8MW-021-1 89R40-025-1 211.0 28 7 5 24 40 55 0.22
8MW-022-1 89R50-025-1 238.5 32 9 6 24 50 67 0.33
8MW-023-1 89R63-025-1 263.5 40 11 6 27 62 85 0.52

Notes

Pneumatic Swing Clamps 9500 Series – Features
NEW
DE-STA-CO’s newest generation swing clamp with patented swing
technology. Unique designs allows clamp arm to swing 90º on a
horizontal plane before moving downward on its clamping stroke.
t No.
Paten 80
,4
7,290
COMING SOON: 13 mm and 22 mm sizes.

LOOK FOR THESE IN OUR 2008 CATALOG
Product Features
No linear travel during rotation, Arm connection allows for two types of arms, fixed
does not move down or up (shown) or radially adjustable
during rotation
Enclosed rod for use in

Piston rod supported at harsh evironments
both the top and bottom
of the shaft
Fixed orifice porting,

Switch grooves for either Ø4mm or does not require flow
6x5 mm switches (magnet on piston) controls
No blacklash option for

precise repeatability
Mounts with standard socket

head cap screws (4x) through
either the top or bottom flange
Series no. Clamp Force (lbs.)

Straight Pull 71 88 106 124 141 159 177 194 212
W/"T" Arm 36 44 53 62 71 80 89 97 106
9540
W/2.0" Arm 46 60 76 92 105 118 131 147 161
W/3.0" Arm 34 43 52 61 70 79 87 96 105
Straight Pull 41 52 62 72 83 93 103 114 124
W/"T" Arm 21 26 31 36 42 47 52 57 62
9530
W/2.0" Arm 26 34 44 52 61 68 76 84 92
W/3.0" Arm 20 25 30 35 40 45 50 55 60
Air Pressure (PSI) 40 50 60 70 80 90 100 110 120

9500 Series – Specifications
NEW
Swing
Model no. Direction A B øC D E øF G H J K L M N
9530R RH
44.7 34 5.5 12.7 5.1 25.4 112.7 155.7 167.3 20 17.4 95.3 1/8 NPT
9530L LH
9540R RH
52 40 5.5 16 9 29 121.4 165 176.2 20 21.3 100.8 1/8 NPT
9540L LH
All dimensions shown in metric (mm)
Clamp Arm Options (Can be used with 9530 and 9540 Series)
These standard arms can be mounted in 90º increments to the piston rod.
954050 954054
954053 954055

Notes

Pneumatic Accessories
New products
NEW
Models:
810164, 810167, 810159, 810168, 810163, 810166, 810165, 810172
810171, 810174 810169, 810175 810170, 810173
BRN
BRN BRN BRN
+ LOAD
+ LOAD +
24-240VAC
-
CIRCUIT
BLK LOAD BLK
CIRCUIT
CIRCUIT
MAIN
MAIN
MAIN
POWER POWER POWER
BLU BLU LOAD
BLU BLU
- - -
-
page 13.3

Models 810159-810175
NEW
Cable: Robotic Grade, abrasion resistant
Tie Rod Mount Models
polyurethane (PUR) jacket, PVC Insulation
810165 Cord is 3 meters long
Temperature Range: 14º to 158° F (-10º to +70° C)
Enclosure Classification: IP67 (NEMA 6) 810172 Cord is 6" long with M8 Male
Model 8315 with sensor Model 807-S with sensor
Mount example Assembly
Dimensions
Model no. A B C D 1 4 3 Cord Type
810159 22 10 – – – – – 3 Meters Long (no connecter)
810163 – – 8 30 – – – 3 Meters Long (no connecter)
810165 – – – 3 Meters Long (no connecter)

See Illustration
810166 18.5 6 – – – – – 3 Meters Long (no connecter)
810167 18.5 6 – – – – – 3 Meters Long (no connecter)
810169 22 10 – – BRN(+) Not Used BLU(-) 6” Male, M8 Connector
810170 – – 8 30 BRN(+) BLK(OUT) BLU(-) 6” Male, M8 Connector
810171 – – 8 30 BRN(+) BLK(OUT) BLU(-) 6” Male, M8 Connector
810172 BRN(+) Not Used BLU(-) 6” Male, M8 Connector

See Illustration
810173 18.5 6 – – BRN(+) BLK(OUT) BLU(-) 6” Male, M8 Connector
810174 18.5 6 – – BRN(+) BLK(OUT) BLU(-) 6” Male, M8 Connector
810175 – – 13 30 BRN(+) Not Used BLU(-) 6” Male, M8 Connector

Models 810159-810175
Cont’d
Wiring diagrams
810164, 810167, 810171, 810174 810159, 810168, 810169, 810175
BRN
+ BRN
LOAD +
BLK LOAD -
CIRCUIT
MAIN
POWER
POWER
BLU
- BLU
-
-
810163, 810166, 810170, 810173 810165, 810172

BRN BRN
+ LOAD
BLK
24-240VAC
CIRCUIT
MAIN
CIRCUIT
MAIN
POWER
BLU LOAD
- BLU
Specifications
Sensor Operation Switching Power Voltage Protection
Model no. Mount Type Operation Voltage Current Rating Drop Circuit
810159 ø4mm Reed SPST 5-120V DC/AC 50mA Max. 6 Watts 3.0V Max. None
Switch Normally Open 50/60Hz
810163 6.5 x 5mm Solid PNP 10-30V DC 100mA Max. 3 Watts 2.0V Max. Reverse Polarity, Short
State Normally Open Circuit
810164 6.5 x 5mm Solid NPN 10-30V DC 100mA Max. 3 Watts 2.0V Max. Reverse Polarity, Short
810165 Tie Rod Solid TRIAC 24-240 V AC 4 AmpsMax- 30 Watts 1.5 V @ Reverse Polarity, Short
State Normally Open 50/60 Hz Only 25 AmpInrush .05 A Max. Circuit
810166 ø4mm Solid PNP 4.5-28 V DC 100mA Max. 3 Watts 0.5 V @ Rev Pol, Surge Suppression
State Normally Open 50mA Max.
810167 ø4mm Solid NPN 4.5-28 V DC 100mA Max. 3 Watts 0.5 V @ Rev Pol, Surge Suppression
810168 6.5 x 5mm Reed SPST 5-220V DC/AC 100mA Max. 10 Watts 3.0V Max. None
810169 ø4mm Reed SPST 5-120V DC/AC 50mA Max. 6 Watts 3.0V Max. None
810170 6.5 x 5mm Solid PNP 10-30V DC 100mA Max. 3 Watts 2.0V Max. Reverse Polarity, Short
810171 6.5 x 5mm Solid NPN 10-30V DC 100mA Max. 3 Watts 2.0V Max. Reverse Polarity, Short
810172 Tie Rod Solid TRIAC 24-240 V AC 4AmpsMax- 30 Watts 1.5 V @ Reverse Polarity, Short
State Normally Open 50/60 Hz Only 25AmpInrush .05 A Max. Circuit
810173 ø4mm Solid PNP 4.5-28 V DC 100mA Max. 3 Watts 0.5 V @ Rev Pol, Surge Suppression
810174 ø4mm Solid NPN 4.5-28 V DC 100mA Max. 3 Watts 0.5 V @ Rev Pol, Surge Suppression
810175 6.5 x 5mm Reed SPST 5-220V DC/AC 100mA Max. 10 Watts 3.0V Max. None

Models 810151, 810152, 810153, 810154,
810155, 810156, 810157, 810158,
Switch options are available for the following Models: 812-U, 816, 840, 841, 849, 860, 861, 863, 864, 870, 871,
890, 891, 893, 894, 1000 & 1001.
Reed Switches are available from factory stock. The switches are activated by a magnetic ring installed on the
cylinder piston. As the magnetic ring moves under the switch, it closes the contacts and sends a signal to a
programmable controller or other electronic device.
Switches have nine-foot leads as standard. Longer leads are available upon special request.
Hall Effect switches are also available on special order. Contact our Customer Service Department.
Switches have a tie-rod mounting clamp as standard. A band clamp is required for 812-U, 816
cylinders used with Switch Models 810156 and 810158. Please order the band clamp as model 810156-1.
Models 810151, 810152,

810154, 810155, 810157
Model 810156 (or 810158)

Tie rod clip included Switch shown mounted on Model 871 Model 810153* shown mounted on Model 812-U
Maximum Temperature Sensitivity

Switching Switching Switching Voltage Limit Lead and
Part no. EDP no. Type Function Voltage Current Power Drop (Ambient) Wire Orientation
810151 58150 REED, MOV, SPST 5-120V AC/DC .5A Max. 10 Watts 3.5 Volts 176º F 9' 85 Gauss
LED Normally Open 50/60 HZ .005A Min. Max. (80º C) Parallel
810153 58104 REED, MOV, Normally 24-240V AC 4A Max. 100 Watts 1 Volt 176º F 9' 85 Gauss
LED Open 50/60 HZ .005A Min. Max. (80º C) Parallel
50A in Rush
810154 58154 REED, No MOV, SPST 0-120V AC/DC .5A Max. 10 Watts 0 Volt 176º F 9' 85 Gauss
No LED Normally Open 50/60 HZ Max. (80º C) Parallel
810155 58155 Hall Effect, Normally Open 6-24V DC .5A Max. 12 Watts 1 Volt 176º F 9' 85 Gauss
LED Sourcing PNP Output 50/60 HZ Max. (80º C) Parallel
810157 58157 Hall Effect Normally Open 6-24V DC .5A Max. 12 Watts 1 Volt 176º F 9' 85 Gauss
NPN Output Max. (80º C) Parallel
810158 58158 Hall EffectNormally Open 6-24V DC .5A Max. 12 Watts 1 Volt 176º F 9' 85 Gauss
PNP Output Max. (80º C) Parallel
Note: Models 810156 and 810158 use 810156-1 band clamp to mount the switch to the wall of the cylinder. All other Models use tie-rod clip 810151-1.
Switch Dimensions (Less Mounting Clip)
B Part no. EDP no. A B C

WARRANTY ON
ELECTRICAL PRODUCTS 810151 58105 0.37 0.93 0.53
A 810152 58152 0.37 0.93 0.53
DE-STA-CO EXPRESSLY LIMITS THE 810153 58104 0.87 1.30 0.67
PRODUCT WARRANTY AS APPLIED TO ANY 810154 58154 0.37 0.93 0.53
ELECTRICAL OR ELECTRONIC COMPONENT 810155 58155 0.37 0.93 0.53
C
USED ON OR ASSOCIATED OR CONNECTED 810156 58156 0.37 0.93 0.53
WITH ANY PRODUCT TO A PERIOD OF ONE 810157 58157 0.37 0.93 0.53
(1) YEAR FROM THE DATE THE PRODUCT IS 810158 58158 0.37 0.93 0.53
DELIVERED TO THE FIRST USER.
*To be used on larger clamp models only – Series 847 and higher.

Automation Power Clamps
New products
NEW NEW
81L Series 82L Series
page 14.12 page 14.18

Automation Power Clamps Product group - automation power clamps
840 1,500 14.4 82L25 Without manual 14.18
841 1,500 82L30 handle
82L40
860 3,000 14.6

861 3,000
890 5,000
891 5,000
1000 10,000
1001 10,000
863 14.8 82L25 With manual 14.30

864 82L32 handle
893 82L40
894
991-MRM 14.10
1091-MRM
81L12 14.12
81L16
81L20
81L25

Automation power clamps
Heavy-duty power
clamp 891 and Model
624 straight-line action
clamp modified on a
welding machine.

Models 840, 841
Designed for high production applications, these toggle action pneumatic clamp centerline. The corresponding odd numbered models have a 90°
clamps offer exceptional clamping forces and holding capacities – far arm. The angular locked position of both versions is precisely controlled
greater than other clamps of similar size. And unlike most pneumatic by the hardened steel insert. Clamp arms can be machined, drilled, cut
toggle clamps, they do not require greater pressure to open than to close. off or welded to suit the application requirements.
Of special importance in the design of the Series 840 is the oval cylinder. Models 840 and 841 are tongue-mount clamps.
Because of the extremely narrow profile of these clamps, they can be
used in cramped quarters or can be ganged closer together in multiple
installations.
The even numbered models in this series feature a 180° clamping arm
which travels to an over-center locked position parallel (180°) to the
ALSO AVAILABLE
Switch Options Page 13.5
ing
etic R 58400
Magn ow A e Model 840
N eatur
ard F
Stand
58410
Model 841
Model no. Formula to Calculate Exerting Force
840 Max. Clamp Arm = 12 x Line Pressure (PSI)

841 Exerting Force (lbs.) Distance from Pivot Point to Clamping Point (in.)
Holding Torque Clamping Torque Piston

max. @ 80 PSI – Arm Weight Port Size
Model no. [in. lbf.] [in. lbf.] [in.] Position [lbs.] NPT B1 B1a B2 B2a B3 B5 B7 B7a B18
840 4,500 960 1.50 100º 3.90 3/8 1.38 1.38 – 3.69 0.38 0.19 1.00 1.88 1.37
841 4,500 960 1.50 100º 4.25 3/8 1.38 1.38 3.25 – 0.38 0.19 1.00 1.88 1.37
Model no. B24 B25 B30 øD1 øD4 L1 L2 L3 L4 L4a L5 L6 L9 L10 L14
840 2.88 0.06 2.50 0.25 0.25 10.05 4.56 3.13 – 0.88 – 0.88 1.25 0.50 1.81
841 2.88 0.06 2.50 0.25 0.25 10.05 4.56 3.13 0.88 – 0.49 0.88 1.25 0.50 1.81

Models 840, 841
Models 840, 841
Opening B24
(841) B1a
L4a
B7
B3 Opening
B5 (840)
L4
B2
B2a
D4
L6
L14
L2
B25
L5
L3
L1
L9
B7a D1
Port
Size
B30 B18
B1
L10
Spare parts
Model no. Seal kit Cylinder

840 8410400 840CYL
841 8410400 840CYL

Models 860, 861, 890, 891, 1000, 1001
Automation power clamp, heavy design Features:
Application: High holding capacities
Clamping, holding, gripping and positioning of sheet metal and other Long cycle life
parts in jigs and handling systems. Mounting flexibility on all four sides
Clamping arm in horizontal or vertical clamping position
Key areas of application: Toggle action mechanism
High production applications

ALSO AVAILABLE
Switch Options Page 13.5 860 Max. Clamp Arm = 31.25 x Line Pressure (PSI)
890 Max. Clamp Arm = 67.5 x Line Pressure (PSI)

ing
etic R 1001 Exerting Force (lbs.) Distance from Pivot Point to Clamping Point (in.)
Magn ow A e
N eatur
ard F
Stand
Model 861, 891 or 1001 Sensors Model 860, 890 or 1000

(clamping arm in horizontal (optional) (clamping arm in vertical
clamping position) clamping position)
Technical data
Holding
Torque Clamping Torque Piston
max. @ 80 PSI – Arm Weight Port Size
Model no. [in. lbf.] [in. lbf.] [in.] Position [lbs.] G B1 B1a B2 B2a B3 B5 B7 B7a B18
860 9,000 2,500 2.00 180º 8.75 3/8 2.94 1.75 – 5.44 0.41 0.25 2.31 2.19 2.50
861 9,000 2,500 2.00 90º 9.00 3/8 2.94 1.75 4.00 – 0.41 0.25 2.31 2.19 2.50
890 15,000 5,400 2.50 180º 13.00 3/8 3.56 2.00 – 6.57 0.50 0.31 2.76 2.50 3.00
891 15,000 5,400 2.50 90º 13.50 3/8 3.56 2.00 5.06 – 0.50 0.31 2.76 2.50 3.00
1000 30,000 12,000 3.25 180º 32.00 1/2 4.50 2.62 – 9.00 0.63 0.44 3.50 3.50 3.75
1001 30,000 12,000 3.25 90º 33.00 1/2 4.50 2.62 7.00 – 0.63 0.44 3.50 3.50 3.75
Model no. B24 B25 B30 øD1 øD4 L1 L2 L3 L4 L4a L5 L6 L7 L9 L10 L14
860 3.31 0.09 2.81 0.34 0.31 12.44 5.75 4.06 – 1.12 – 1.44 2.50 1.25 0.62 2.50
861 3.31 0.09 2.81 0.34 0.31 12.44 5.75 4.06 1.13 – 0.40 1.44 2.50 1.25 0.62 2.50
890 3.87 0.13 3.25 0.41 0.38 13.37 6.75 4.75 – 1.25 – 1.75 2.65 1.38 0.81 3.06
891 3.87 0.13 3.25 0.41 0.38 13.37 6.75 4.75 1.25 – 0.50 1.75 2.65 1.38 0.81 3.06
1000 5.38 0.13 4.50 0.53 0.50 17.51 9.25 6.25 – 1.75 – 2.25 3.96 2.00 1.00 3.75
1001 5.38 0.13 4.50 0.53 0.50 17.51 9.25 6.25 1.75 – 0.88 2.25 3.96 2.00 1.00 3.75

Models 860, 861, 890, 891, 1000, 1001
Models 860, 861, 890, 891, 1000, 1001
Opening
Opening
Port Size
Information for machining of clamp arm: Steel 1.0726
Spare parts
Model no. Seal kit Cylinder

860 8610100 865133
861 8610100 865132
890 8910100 895133

891 8910100 895132
1000 10010100 1005134

1001 10010100 1005133

Models 863, 864, 893, 894
These power clamps have many unique features which make them
ideal for use in hostile welding and machining environments.
Linkage is completely enclosed to keep contaminants out.
Clamp arm is offset, and it can be mounted on the left-side (L),
right-side (R) or on both sides of the clamp (D).
Over-center toggle-lock design for maximum reliability
and clamping forces.
Mounting surfaces allow blade mounting on either side of
the clamp.
58631 58640
Clamp arms are indexable and can be repositioned
Model 863-L Model 864-D
in 45° increments.
Magnetic ring sensing options available.
Clamp arm is weldable/machinable to suit any application.
Must install supplied restrictor fittings before use.
ing
etic R
Magn ow A e
N eatur
ard F
Stand
ALSO AVAILABLE
Switch Options Page 13.5
See accessories beginning pages 9.1 and 13.1

863 Max. Clamp Arm = 30 x Line Pressure (PSI) 58930 58932
864 Exerting Force (lbs.) Distance from Pivot Point to Clamping Point (in.) Model 893-D Model 893-R

Maximum Exerting Force Is

1600 lbs. @ 80psi.
863/864
1800
1600
1400
1200
1000
800
600
400
Technical data
200
0 Arm Arm
1.5 2 3 4 5 6
Model no. EDP no. Weight Style Opening
863-D 58630 13.5 lbs. 90º DUAL 130º
Maximum Exerting Force Is 863-L 58631 12.5 lbs. 90º L.H. 130º
1600 lbs. @ 80psi. 863-R 58632 12.5 lbs. 90º R.H. 130º
893/894 864-D 58640 13.5 lbs. 180º DUAL 121º
1800
1600
864-L 58641 12.5 lbs. 180º L.H. 121º
1400 864-R 58642 12.5 lbs. 180º R.H. 121º
1200 893-D 58930 20.0 lbs. 90º DUAL 118º
1000 893-L 58931 18.0 lbs. 90º L.H. 118º
800
600
893-R 58932 18.0 lbs. 90º R.H. 118º
400 894-D 58940 20.0 lbs. 180º DUAL 118º
200 894-L 58941 18.0 lbs. 180º L.H. 118º
0 894-R 58942 18.0 lbs. 180º R.H. 118º
2 3 4 5 6 7 8

Con’t Models 863, 864, 893, 894
Model 863 Model 893
L1 L1
863-D 893-D
893-R
863-R
B23
863-L
G G 893-L
Pivot Point D1
D1 B1a Pivot Point B1a
D4
D4 D1
B7a B7a B24

B24
D1 130º Arm L9 118º Arm

Opening Opening
D4 B2 B2
L10 L10
L9a L8a
L14 B1
L3 B1 L3
L4 L4
Model 864 Model 894
L1 864-D L1 894-D
864-R 894-R
B23
L10 L10
864-L 894-L
G G
Pivot Point Pivot
B1a D1 Point B1a
D1 D4
121º Arm D1 118º Arm
D9 Opening Opening
B7a B7a B24

B24
L4 P
D1 L9
D4 L9a
F B2 B1 L8a B2
B1
L3 L3
Model no. B1 B1a B2 B7a B23 B24 D1 D4 G L1 L3 L4 L8a L9a L10
863-D 1.31 2.50 5.00 1.77 – 3.64 3/8-16 (4) 0.37 (2) 3/8 NPT(2) 13.58 4.31 1.00 1.61 1.77 0.75
863-L 1.31 2.50 5.00 1.77 – 3.64 3/8-16 (4) 0.37 (2) 3/8 NPT(2) 13.58 4.31 1.00 1.61 1.77 0.75
863-R 1.31 2.50 5.00 1.77 – 3.64 3/8-16 (4) 0.37 (2) 3/8 NPT(2) 13.58 4.31 1.00 1.61 1.77 0.75
864-D 1.31 2.50 5.00 1.77 – 3.64 3/8-16 (4) 0.37 (2) 3/8 NPT(2) 13.58 4.31 1.00 1.61 1.77 0.75
864-L 1.31 2.50 5.00 1.77 – 3.64 3/8-16 (4) 0.37 (2) 3/8 NPT(2) 13.58 4.31 1.00 1.61 1.77 0.75
864-R 1.31 2.50 5.00 1.77 – 3.64 3/8-16 (4) 0.37 (2) 3/8 NPT(2) 13.58 4.31 1.00 1.61 1.77 0.75
893-D 1.50 3.48 5.00 2.50 1.01 3.22 3/8-16 (8) 0.37 (2) 3/8 NPT(2) 14.60 4.86 1.00 3.00 1.38 1.00
893-L 1.50 3.48 5.00 2.50 1.01 3.22 3/8-16 (8) 0.37 (2) 3/8 NPT(2) 14.60 4.86 1.00 3.00 1.38 1.00
893-R 1.50 3.48 5.00 2.50 1.01 3.22 3/8-16 (8) 0.37 (2) 3/8 NPT(2) 14.60 4.86 1.00 3.00 1.38 1.00
894-D 1.50 3.48 5.00 2.50 1.01 3.22 3/8-16 (8) 0.37 (2) 3/8 NPT(2) 14.60 4.86 1.00 3.00 1.38 1.00
894-L 1.50 3.48 5.00 2.50 1.01 3.22 3/8-16 (8) 0.37 (2) 3/8 NPT(2) 14.60 4.86 1.00 3.00 1.38 1.00
894-R 1.50 3.48 5.00 2.50 1.01 3.22 3/8-16 (8) 0.37 (2) 3/8 NPT(2) 14.60 4.86 1.00 3.00 1.38 1.00
Available upon request, as are a number of other modifications Note: See pages 9.1 and 13.1 for accessories

Models 991-MRM, 1091-MRM
Extreme Temperature Pneumatic Clamps
These new, fully-enclosed high temperature power clamps are
manufactured using proprietary coatings and extreme temperature
grease and seals. This makes them ideal for rotary molding
applications. With the clamps over-center toggle lock design, air lines
can be disconnected, allowing the clamps to travel in and out of high
temperature ovens while maintaining constant clamping pressure.
Features:
Roller bearing used in high-stress loading points
Over-center toggle lock mechanism
Fully-enclosed mechanism packed with no melt, extreme
temperature grease
Extreme temperature polymer seals
Models Totally enclosed clamp assembly
991-MRM
Benefits:
1091-MRM
Powerful holding and exerting forces
Clamp remains locked when air pressure is lost or removed
Specifically designed for rotary molding applications
Capable of continuous exposure to 500° F and short exposure
to 700° F ovens
Retains lubrication while keeping out quench spray and other
contaminants for reduced maintenance
Model no. Weight Arm Style* Arm Opening
991-MRM 18 lbs. 90º Dual 118º

1091-MRM 33 lbs. 90º Dual 98º
*Clamp arm can be positioned in 180° by removing the arm while the clamp
is in the closed position – then adjusting arm to the 180° position

991-MRM Max. Clamp Arm = 40 x Line Pressure (PSI)
Exerting Force (lbs.) Distance from Pivot Point to Clamping Point (in.)
1091-MRM Max. Clamp Arm = 92.5 x Line Pressure (PSI)

Exerting Force (lbs.) Distance from Pivot Point to Clamping Point (in.)

Models 991-MRM, 1091-MRM
Extreme Temperature Pneumatic Clamps
991 MRM clamps (4) used to

clamp two mold halves together.
Clamp to be lubed with extreme temperature grease once P

per month of clamp service using standard grease fitting
N
Models B
991-MRM
W
1091-MRM
I
G
Y
K SQ.
K SQ.
L O Y1
I
F
D1 V D1 V
D D E
J
J1 C
H SQ.
Model no. A B C D D1 E F G H I øJ øJ1 K
991-MRM 3/8 G Port 86 376 35 17.5 123 76.2 225 76 Sq. 150 9.5 10.0 19
1091-MRM 1/2 G Port 116 448 51 25 153 90 293 95 Sq. 195 13 13.5 22
Model no. L M N O P T U V W Y Y1
991-MRM 10 70 43 183 104 49 65 70 20 33 20

1091-MRM 10.2 94 61 232 156 68 90 90 25 37 20

Series 81L12, 81L16, 81L20, 81L25 NEW
■ Automation power clamps, miniature design ■ Low weight (aluminium body)
■ Four sizes, three cylinder-Ø
Application:
■ Two mounting areas (front and rear)
Clamping, holding, gripping and positioning of metal sheets and other ■ Toggle action mechanism
parts in jigs and handling systems. ■ The models can be quickly fitted with magnetic end position
Features: sensors.
■ Compact design ■ Model 81L20-101 interchangeable with 8820-2000000
■ Long life cycle ■ Model 81L25-101 interchangeable with 8825-1000000
■ High holding torques
81L12-10100 81L16-10100 81L20-10100 81L25-10100

Order code 81L..-2.......
Example Order no. 81L20 – 1 01 00
Models 01 = clamping arm, horizontal 00 =

(120° standard-opening angle) Standard Design
81L12-10100 81L16-10100 81L20-10100 81L25-10100
41 = clamping arm, vertikal

(90° standard-opening angle)
81L12-14100 81L16-14100 81L20-14100 81L25-14100
Base model Clamping arms Sensors
Model no. Holding torque max. Clamping torque Weight Air consumption per Max. additional weight
max. at 72 psig. ~ double stroke at 72 psig. at clamp arm mounted
[in.–lbf.] [in.–lbf.] [lbs.] [in3] in position "X" [lbs.]
81L12-101_ _ 221 39 0.4 15.3 0.11

81L12-141_ _ 177 39 0.4 15.3 0.11
81L16-101_ _ 531 53 0.6 16.5 0.18
81L16-141_ _ 354 57 0.6 15.9 0.18
81L20-101_ _ 885 159 1.1 24.4 0.20
81L20-141_ _ 708 150 1.1 21.4 0.20
81L25-101_ _ 885 159 1.2 24.4 0.22
81L25-141_ _ 708 150 1.2 21.4 0.22
All values shown are in metric

Automation power clamps, miniature design
Opening angle
Opening angle
Area of
interference
Pivot
Powered with compressed air max. 6 bar

Operation with oil-free air is permissible
Right hand: T-slot for sensor

Left hand: Round slot for sensor
Technical data
Model no. ØD1 ØD2 ØD3 B1 B2 B3 B5 B7 B8 B10 B11a B11b B12 B18 L1 L2 L4 L5a L5b L6 L7 L8 L9 L10 L11 R3 R4
H7 ±0,1 ±0,2 ±0,1 ±0,1 ±0,2 ~ ±0,1 ~ ~
81L12-101/-141 3 3,3 M4x6 24 40 2,5 1,5 15 25 9 27 31,5 9 28 104 40,5 7 2,5 17,5 4,5 15 3 9 6 23,5 41 48
81L16-101/-141 3 4,3 M5x5 30 50 2 2 20 26 15 30 39,5 15 30 119 49,5 9 2,25 20,5 5,75 20 4 12 8 35,75 51 63
81L20-101/-141 4 4,5 M6x8 35 55,5 2,5 3 20 34 20 30,5 40 20 40 151 64,5 12 3 25 9 25 5 15 7,5 34,5 57,5 70
81L25-101/-141 4 6,5 M6x8 35 65,5 2,5 3 20 34 20 40,5 50 20 40 151 64,5 12 3 25 9 25 5 15 12 44,5 67 79
All dimensions shown are in metric (mm).
Accessories Pin assignment
SME-8F-DE
Specification Order no. Comment
Position sensor SME-8F-DE Sensor, 3 wire cable, 2,5 cm open end
Position sensor SME-8F-DE-S Sensor, with cable, connector M8x1, 3-pin
SME-8F-DE-S
Adaptor 82ZB-004-1 Adaptor for mounting 81L20-1, 81L25-1 at
tube system Ø25 mm
Additional sensors can be found on

pages 13.2 and 13.3
Spare parts
BN = Brown
Specification Order no. for clamp
BK = Black
Seal-Kit 81L12-1-00 81L12-1
BU = Blue
81L16-1-00 81L16-1
R L = Load
81L20-1-00 81L20-1, 81L25-1

Automation Power Clamps Automation power clamps, lightweight design
Clamp-family 82L-1 without manual handle option
82L25-1 without manual handle 82L32-1 without manual handle 82L40-1 without manual handle
page 14.15 page 14.18 page 14.18
Accessories
page 14.29

Automation power clamps, lightweight design
Clamp-family 82L-1 with manual handle option
82L25-1 with manual handle 82L32-1 with manual handle 82L40-1 with manual handle
page 14.27 page 14.27 page 14.27
Accessories
page 14.29

Automation Power Clamps Automation power clamps, lightweight design
Modular system for lightweight automation Select the desired clamping arm
power clamps Assemble the components required to complete the assembly
(only here will the clamp be fully configured and set up).
Models: 82L25-1....0.B 82L25-1....H.B
82L32-1....0.B 82L32-1....H.B Benefits:
82L40-1....0.B 82L40-1....H.B Faster delivery because standard models are in stock
Fewer part numbers for spare parts management
Procedure:
Improved flexibility of clamp configuration
Select the base model (with or without manual handle)
Select the desired sensing option
82L... series
Base model without sensing option
and without clamping arm
Order number for series

Component Description 82L25-1 82L32-1 82L40-1
Base model
w/o clamping arm w/ manual handle 82L25-14300H0B 82L32-16300H0B 82L40-16300H0B
w/o sensing
w/o manual handle 82L25-1430000B 82L32-1630000B 82L40-1630000B
Standard opening
Angle 96º
On-center arm 8JG-075-3-0 8JG-065-2-0 8JG-067-2-01
Clamping arm Dimensions see page
14.16, 14.17 14.20, 14.24 14.20, 14.24

Offset single arm N/A 8JG-066-1-01 8JG-068-1-01
M8 x 1, fixed (C8) N/A 8EA-023-2 8EA-023-2
M12 x 1, fixed (B7) N/A 8EA-060-1 8EA-060-1
Sensing system
M12 x 1, w/lead (B8) 8EA-033-2 N/A N/A
M12 x 1, w/lead (B8) N/A 8EA-031-1 8EA-031-1
90º 8CE-216-1 8CE-096-1 8CE-196-1

75º 8CE-213-1 8CE-093-1 8CE-193-1
Opening angle stroke limiter 60º 8CE-211-1 8CE-091-1 8CE-191-1
45º 8CE-209-1 8CE-089-1 8CE-189-1
30º 8CE207-1 8CE-087-1 8CE187-1

82L25/32/40 Base models without clamping arm
Views 82L32.../82L40... View 82L25...
Dimensions of the
B1a drive shaft
Pivot point
SW
End position control
L17 sensor
B5a
L6
L8
L6
L8
B7a
L2
L8a
L18
*
D1
B30
L9
L7
L3
L3
**
L7
L9
B25
D1
B6 "Y"
L9a
L1 max.
D1
B6
L19
B27 B5
D4 H7
B30 B5
IMPORTANT!
Power clamp must only
be operated by external
pneumatic one-way flow
control valves.
G
View “Y”
B14
* Rear mount area
B24 (only 82L25...)
same as front
L9
B23 max. mount area

** End position control
sensor
B1
B7
Technical data (see page 14.30 for additional dimensions of models with manual handle)
Max. holding Clamping = Max. Port
Base torque torque at 74 PSI Piston operating Weight Connection B1 B1a B5 B5a
Model no. [in. lbf.] [in. lbf.] Diameter angle [lbs.] G -0,5
82L25-1430000B
660 216 25 96º 2.2 G 1/8 35 35 4 5
82L25-14300H0B
82L32-1630000B
1,596 492 32 96º 3.3 G 1/8 46 34 4 –
82L32-16300H0B
82L40-1630000B
3,360 1,068 40 96º 4.84 G 1/8 40 40 6,5 –
82L40-16300H0B
B6 B7 B7a B14 B23 B24 B25 B27 B30 D1 D4 L1 L2 L3 L6 L7 L8 L8a L9 L9a** L17 L18 L19 SW
Base
Model no. ±0,1 ±0,1 max. ±0,1 H7 max. max. ±0,05 ±0,1 ±0,1 ±0,1 ±0,1 ±0,1 N9 h9
82L25-1430000B
8 25 – – 53 63 – – 37 M5 – 196 95 63 17 28 5 – 18 – 8,5 – – 9
82L25-14300H0B
82L32-1630000B
7,5 20 30 107 60 87 8 3,5 – M5 6 209 115 76 25 36 8 42 20 20 16 48 8 11
82L32-16300H0B
82L40-1630000B
8,5 25 35 117 74 97 9 3,5 12 M6 6 260 128 83 30 40 10 50 20 25 12,5 58,5 8 16
82L40-16300H0B
** Tolerance for distance to dowel hole ±0,02 All dimensions shown in metric (mm).

Series 82L25-1, 82L32-1, 82L40-1, (without manual handle)
Automation power clamps, lightweight design, Features:
enclosed model, without manual handle Enclosed body
Models: 82L25-1....0.. Dirt-resistant
Compact design
Application: High holding capacities
Ideal for clamping, holding, gripping and positioning of sheet metal Long cycle life
and other parts, mainly in jigs and part handling systems. Your best Low weight (aluminium body)
choice for carefully inserting the workpiece into the fixture are clamps Mounting areas at front and back
with a manual handle option. Toggle action mechanism
Key areas of application: Manual unlocking in case of pressure drop
Application areas include automotive manufacturing, sheet metal Inductive sensing module (optional)
processing industries and robotic welding.
82L25-103B800
Horizontal clamped position
Model no. Max. Clamping

Standard holding torque at Clamping Clamping Cylinder Weight
w/o sensing w/ sensing opening torque 74 PSI Arm Position Ø ~
angle [in. lbf.] [in. lbf.] [lbs.]
82L25-1030000 82L25-103B800 105º 660 216 on-center horizontal 25mm 2.2

82L25-1430000 82L25-143B800 96º 660 216 on-center vertical 25mm 2.2
Concept guideline (with reference to axis of clamping arm rotation)
Diagram of Clamping Force for 82L25-1:

See page 14.20
Maximum tooling weight 82L25
2.20
1.76
Weight [lbs.]
1.72
0.88
0.44
0.00
50 75 100 125 150 175 200
Radius [mm]
All details apply under an air pressure of 88 PSI and opening and
closure times of 1 second each.

82L25-103...
Dimensions of the
drive shaft
Area of interference
Hold-down piece must
not protrude in the
interior area “R” due to
the area of interference.
Pivot point
End position
control sensor
IMPORTANT!
control valves.
Technical data
Standard Port
B1 B2 B3 B4 B5 B5a B6 B7 B9 B10 B11 B12
opening Clamping Connection
±0,1 ±0,1 ±0,02 +0,1 ±0,2
Model no. angle position G
82L25-103_ _00 105º horizontal G 1/8 35 93 3 45 4 5 8 25 8 20 65 20
B23 B24 B26 B30 D1 D2 D3 L1 L2 L3 L4 L6 L7 L8 L9 L10 L17 R SW

H7
Model no. max. ±0,1 Ø Ø max. ±0,1 ±0,05 +0,1 ±0,1 ±0,1 h9
82L25-103_ _00 53 63 58 37 M5 4 6,5 185 95 63 20 17 28 5 18 12 8,5 48 9
Medium: air, max. 116 PSI
Operation with oil-free air is permissible. All dimensions shown in metric (mm).

82L25-143...
Dimensions of the
drive shaft
SW
7
L1
Pivot point
not protrude in the
End position
control sensor
IMPORTANT!
control valves.
Technical data
Standard Clamping Port B1 B2 B3 B4 B5 B5a B6 B7 B9 B10 B11 B12

opening position connection
Model no. angle G ±0,1 ±0,1 ±0,02 +0,1 ±0,2
82L25-143_ _00 96º vertical G 1/8 35 93 3 45 4 5 8 25 8 20 65 20
B23 B24 B26 B30 D1 D2 D3 L1 L2 L3 L4 L6 L7 L8 L9 L10 L17 R SW

H7
Model no. max. ±0,1 Ø Ø max. ±0,1 ±0,05 ±0,1 ±0,1 ±0,1 h9
82L25-103_ _00 53 63 58 37 M5 4 6,5 185 95 63 20 17 28 5 18 12 8,5 48 9
Medium: air, max. 116 PSI
Operation with oil-free air is permissible. All dimensions shown in metric (mm).

Automation power clamps, lightweight design,
enclosed model, without manual handle
Models: 82L32-1....0..
82L40-1....0..
82L40-103B700
82L32-103B800
Model no.
w/o w/ sensing Max. Clamping
sensing Connector Connector Connector Standard holding torque Clamping Weight
opening torque at 74 PSI arm Clamping Cylinder ~
M8 x 1, fixed M12 x 1, w/lead M12 x 1, fixed angle [in. lbf.] [in. lbf.] location position Ø [lbs.]
82L32-1030000 82L32-103C800 82L32-103B800 82L32-103B700 105º on-center horizontal 32 3.3
82L32-1430000 82L32-143C800 82L32-143B800 82L32-143B700 96º on-center vertical 32 3.3
82L32-1110000 82L32-111C800 82L32-111B800 82L32-111B700 105º left horizontal 32 3.3
82L32-1120000 82L32-112C800 82L32-112B800 82L32-112B700 105º right horizontal 32 3.3
82L32-1510000 82L32-151C800 82L32-151B800 82L32-151B700 96º 1,596 492 left vertical 32 3.3
82L32-1520000 82L32-152C800 82L32-152B800 82L32-152B700 96º right vertical 32 3.3
82L32-1230000 82L32-123C800 82L32-123B800 82L32-123B700 105º dual horizontal 32 3.3
82L32-1630000 82L32-163C800 82L32-163B800 82L32-163B700 96º dual vertical 32 3.3
82L40-1030000 82L40-103C800 82L40-103B800 82L40-103B700 105º on-center horizontal 40 4.4

82L40-1430000 82L40-143C800 82L40-143B800 82L40-143B700 96º on-center vertical 40 4.4
82L40-1110000 82L40-111C800 82L40-111B800 82L40-111B700 105º left horizontal 40 4.4
82L40-1120000 82L40-112C800 82L40-112B800 82L40-112B700 105º right horizontal 40 4.4
3,360 1,068
82L40-1510000 82L40-151C800 82L40-151B800 82L40-151B700 96º left vertical 40 4.4
82L40-1520000 82L40-152C800 82L40-152B800 82L40-152B700 96º right vertical 40 4.4
82L40-1230000 82L40-123C800 82L40-123B800 82L40-123B700 105º dual horizontal 40 4.4
82L40-1630000 82L40-163C800 82L40-163B800 82L40-163B700 96º dual vertical 40 4.4
Sensing options for 82L32-1... and 82L40-1...
B8 connecting plug B7 connecting plug C8 connecting plug

M12x1 with lead M12x1 M8x1

Dimensions
Standard Clamping B1 B1a B2 B4 B5 B6 B7 B7a1

opening arm Clamping Piston Port
Model no. angle position position Ø connection -0,5 ±0,1 ±0,1
82L32-103_ _00 105º on-center horizontal 32 G 1/8 46 34 105 45 4 7,5 20 30

82L40-103_ _00 105º on-center horizontal 40 G 1/4 40 40 110 45 6,5 8,5 25 35
B9 B10 B11 B12 B14 B23 B24 B25 B26 B27 B30 D1 D2 D3 D4 L1 L2 L3 L4 L6
±0,0 ±0,0 H7 H7 ±0,0
Model no. 2 +0,1 2 max. +0,1 Ø Ø max. max. ±0,1 5
82L32-103_ _00 6 20 79 20 104 54 87 8 68,5 3,5 – M5 6 7 6 209 115 76 20 25

82L40-103_ _00 6 20 84 20 107 65 97 9 75 3,5 12 M6 6 7 6 260 128 83 22 30
L7 L8 L8a L9 L9a1 L10 L17 L18 L19 R SW
Model no. +0,1 ±0,1 ±0,1 ±0,1 ±0,1 -0,1 N9 h9
82L32-103_ _00 36 8 42 20 20 12 9,5 48 8 60 11

82L40-103_ _00 40 10 50 20 25 15 11 58,5 8 65 16
Medium: air, max.116 PSI, operation with oil-free air is permissible. All dimensions shown in metric (mm).
1) Tolerance for distance to dowel hole ±0,02
Maximum tooling weight 82L32 Maximum tooling weight 82L40

4.40 6.10
5.50
3.90
5.00
3.30 4.40
Weight [lbs.]
Weight [lbs.]
2.80 3.90
3.30
2.20
2.50
1.70 2.20
1.10 1.70
1.10
0.60
0.60
0
Radius [mm]
Radius [mm]
All details apply under an air pressure of 88 PSI and opening and closure times of 1 second each.

82L32/40-103...
Dimensions of the
drive shaft
5° Hold-down piece must
max. 10
not protrude in the
SW
7 B2
B1a L1
R
Pivot point
End position
L4
control sensor
±0,2°
L6
L8
B7a
L2
L8a
L18
D1
L3
L7
L9
B25
D1
"Y"
B6
L9a
L1 max.
L19
B27 B5
D4 H7
B30
View “Y”
IMPORTANT!
L9
control valves.
G
B7
B4 B14
B12 B24
D3
D2 H7
B23 max.
L10
B1
(B9) B10 B26

B11
Diagram of Clamping Force (at 74 PSI)
Models 82L25..., 32..., 40...
105
82L25…, L1 = 75mm Pivot
90 82L32…, L1 = 99mm
82L40…, L1 = 104mm
Torque (Ft. lbs.) at 74 PSI
75
60
45
30
15
0
0,5 1 1,5 2 2,5 3 3,5 4 4,5 5 5,5 6 6,5 7 7,5 8 8,5
Clamping arm position ”X” (mm)

Technical data
Standard Clamping arm Clamping Piston Port B1 B1a B2 B4 B5 B6 B7 B7a1

opening location position Ø connection
Model no. angle -0,5 ±0,1 ±0,1
82L32-143_ _00 96º on-center vertical 32 G 1/8 46 34 105 45 4 7,5 20 30

82L40-143_ _00 96º on-center vertical 40 G 1/4 40 40 110 45 6,5 8,5 25 35
H7 H7
Model no. ±0,02 +0,1 ±0,02 max. +0,1 Ø Ø max. max. ±0,1 ±0,05
82L32-143_ _00 6 20 79 20 107 54 87 8 68,5 3,5 – M5 6 7 6 209 115 76 20 25

82L40-143_ _00 6 20 84 20 117 65 97 9 75 3,5 12 M6 6 7 6 260 128 83 22 30
L7 L8 L8a L9 L9a1 L10 L17 L18 L19 R SW
Model no. +0,1 ±0,1 ±0,1 ±0,1 ±0,1 N9 h9
82L32-143_ _00 36 8 42 20 20 12 9,5 48 8 60 11

82L40-143_ _00 40 10 50 20 25 15 11 58,5 8 65 16
Medium: air, max. 116 PSI, operation with oil-free air is permissible. All dimensions shown in metric (mm).

4.40 6.10
3.90 5.50
5.00
3.30
4.40
Weight [lbs.]
Weight [lbs.]
2.80 3.90
3.30
2.20
2.50
1.70 2.20
1.10 1.70
1.10
0.60
0.60
0
Radius [mm] Radius [mm]

82L32/40-143...
±0,2° Area of interference

D2 H7
(B9)
L10 L4 not protrude in the
D3
B10
B4
B12
ma
x.
96
°
B1a
B2
Pivot point
R
Dimensions of the
drive shaft End position
B11
B26
control sensor
SW
7
L1
L6
L8
B7a
L2
L8a
L18
D1
L3
L7
L9
B25
D1
"Y"
B6
L9a
L1 max.
L19
B27 B5
D4 H7
B30
View “Y”
IMPORTANT!
L9

control valves.
G
B7
B14
B24 B23 max.
B1

Technical data

82L32-111_ _00 105º left horizontal 32 G 1/8 46 34 105 45 4 7,5 20 30

82L32-112_ _00 105º right horizontal 32 G 1/8 46 34 105 45 4 7,5 20 30
82L32-123_ _00 105º both horizontal 32 G 1/8 46 34 105 45 4 7,5 20 30
82L40-111_ _00 105º left horizontal 40 G 1/4 40 40 92 45 6,5 8,5 25 35
82L40-112_ _00 105º right horizontal 40 G 1/4 40 40 92 45 6,5 8,5 25 35
82L40-123_ _00 105º both horizontal 40 G 1/4 40 40 92 45 6,5 8,5 25 35
H7 H7
82L32-111_ _00 6 20 79 20 107 0,5 53 87 8 3,5 – M5 6 7 6 209 115 76 20 25

82L32-112_ _00 6 20 79 20 107 0,5 53 87 8 3,5 – M5 6 7 6 209 115 76 20 25
82L32-123_ _00 6 20 79 20 107 0,5 53 87 8 3,5 – M5 6 7 6 209 115 76 20 25
82L40-111_ _00 6 20 84 20 117 0,5 57 97 9 3,5 12 M6 6 7 6 260 128 83 22 30
82L40-112_ _00 6 20 84 20 117 0,5 57 97 9 3,5 12 M6 6 7 6 260 128 83 22 30
82L40-123_ _00 6 20 84 20 117 0,5 57 97 9 3,5 12 M6 6 7 6 260 128 83 22 30
L7 L8 L8a L9 L9a1 L10 L17 L18 L19 R SW
Model no. +0,1 ±0,1 ±0,1 ±0,1 ±0,1 -0,1 N9 h9
82L32-111_ _00 36 8 42 20 20 12 12,5 48 8 60 11

82L32-112_ _00 36 8 42 20 20 12 12,5 48 8 60 11
82L32-123_ _00 36 8 42 20 20 12 12,5 48 8 60 11
82L40-111_ _00 40 10 50 20 25 15 16 58,5 8 65 16
82L40-112_ _00 40 10 50 20 25 15 16 58,5 8 65 16
82L40-123_ _00 40 10 50 20 25 15 16 58,5 8 65 16

82L32/40-111../-112../-123..
Dimensions of the
drive shaft Area of interference
5°
max. 10 Hold-down piece must
not protrude in the
SW
B2 the area of interference.
B1a L17
R
B4
Pivot point
End position
L4
control sensor
±0,2°
L6
L8
B7a
L2
L8a
L18
B22
D1
L3
L7
L9
B25
D1
"Y"
B6
L9a
L1 max.
L19
B27 B5
D4 H7
B30
View “Y”
IMPORTANT!
pneumatic one-way flow L9
control valves.
G
B7
B14
B24
D3
B23 max.
D2 H7
B1
B12
L10
(B9) B10 B11

4.40 6.10
3.90 5.50
5.00
3.30
4.40
Weight [lbs.]
Weight [lbs.]
2.80 3.90
3.30
2.20
2.50
1.70 2.20
1.10 1.70
1.10
0.60
0.60
0

Technical data

82L32-151_ _00 96º left vertical 32 G 1/8 46 34 105 45 4 7,5 20 30

82L32-152_ _00 96º right vertical 32 G 1/8 46 34 105 45 4 7,5 20 30
82L32-163_ _00 96º both vertical 32 G 1/8 46 34 105 45 4 7,5 20 30
82L40-151_ _00 96º left vertical 40 G 1/4 40 40 92 45 6,5 8,5 25 35
82L40-152_ _00 96º right vertical 40 G 1/4 40 40 92 45 6,5 8,5 25 35
82L40-163_ _00 96º both vertical 40 G 1/4 40 40 92 45 6,5 8,5 25 35
H7 H7
82L32-151_ _00 6 20 79 20 107 0,5 53 87 8 3,5 – M5 6 7 6 209 115 76 20 25

82L32-152_ _00 6 20 79 20 107 0,5 53 87 8 3,5 – M5 6 7 6 209 115 76 20 25
82L32-163_ _00 6 20 79 20 107 0,5 53 87 8 3,5 – M5 6 7 6 209 115 76 20 25
82L40-151_ _00 6 20 84 20 117 8,5 57 97 9 3,5 12 M6 6 7 6 260 128 83 22 30
82L40-152_ _00 6 20 84 20 117 8,5 57 97 9 3,5 12 M6 6 7 6 260 128 83 22 30
82L40-163_ _00 6 20 84 20 117 8,5 57 97 9 3,5 12 M6 6 7 6 260 128 83 22 30
L7 L8 L8a L9 L9a1 L10 L17 L18 L19 R SW
Model no. +0,1 ±0,1 ±0,1 ±0,1 ±0,1 -0,1 N9 h9
82L32-151_ _00 36 8 42 20 20 12 12,5 48 8 60 11

82L32-152_ _00 36 8 42 20 20 12 12,5 48 8 60 11
82L32-163_ _00 36 8 42 20 20 12 12,5 48 8 60 11
82L40-151_ _00 40 10 50 20 25 15 16 58,5 8 65 16
82L40-152_ _00 40 10 50 20 25 15 16 58,5 8 65 16
82L40-163_ _00 40 10 50 20 25 15 16 58,5 8 65 16

82L32/40-151../-152../-163..
±0,2°
D2 H7
L4
(B9)
L10
D3
Dimensions of the Hold-down piece must
drive shaft not protrude in the
B10
max. interior area “R” due to

9
B4
6°
B12
SW
7
L1 Pivot point
B2
B1a
R
End position
B11
control sensor
L6
L8
B7a
L2
L8a
L18
B22
D1
L3
L7
L9
B25
D1
"Y"
B6
L9a
L1 max.
L19
B27 B5
D4 H7
B30
View “Y”
IMPORTANT!
L9

control valves.
G
B7
B14
B24
B23 max.
B1

4.40 6.10
3.90 5.50
5.00
3.30
4.40
Weight [lbs.]
Weight [lbs.]
2.80 3.90
3.30
2.20
2.50
1.70 2.20
1.10 1.70
1.10
0.60
0.60
0

Series 82L25-1, 82L32-1, 82L40-1, (with manual handle)
Automation power clamps, lightweight design,
enclosed model, with manual handle
Models: 82L25-1....H..
82L32-1....H..
82L40-1....H..
82L25-10300H0 82L32-103C8H0 82L40-10300H0
Model no.
w/o w/ sensing Max. Clamping
sensing Connector Connector Connector Standard holding torque Clamping Weight
opening torque at 74 PSI arm Clamping Cylinder ~
M8 x 1, fixed M12 x 1, w/lead M12 x 1, fixed angle [in. lbf.] [in. lbf.] location position Ø [lbs.]
82L25-10300H0 – 82L25-103B8H0 – 105º 660 216 on-center horizontal 25 2.6
82L25-14300H0 – 82L25-143B8H0 – 96º 660 216 on-center vertical 25 2.6
82L32-10300H0 82L32-103C8H0 82L32-103B8H0 82L32-103B7H0 105º on-center horizontal 32 3.75

82L32-14300H0 82L32-143C8H0 82L32-143B8H0 82L32-143B7H0 96º on-center vertical 32 3.75
82L32-11100H0 82L32-111C8H0 82L32-111B8H0 82L32-111B7H0 105º left horizontal 32 3.75
82L32-11200H0 82L32-112C8H0 82L32-112B8H0 82L32-112B7H0 105º right horizontal 32 3.75
1,596 492
82L32-15100H0 82L32-151C8H0 82L32-151B8H0 82L32-151B7H0 96º left vertical 32 3.75
82L32-15200H0 82L32-152C8H0 82L32-152B8H0 82L32-152B7H0 96º right vertical 32 3.75
82L32-12300H0 82L32-123C8H0 82L32-123B8H0 82L32-123B7H0 105º both horizontal 32 3.75
82L32-16300H0 82L32-163C8H0 82L32-163B8H0 82L32-163B7H0 96º both vertical 32 3.75
82L40-10300H0 82L40-103C8H0 82L40-103B8H0 82L40-103B7H0 105º on-center horizontal 40 4.84

82L40-14300H0 82L40-143C8H0 82L40-143B8H0 82L40-143B7H0 96º on-center vertical 40 4.84
82L40-11100H0 82L40-111C8H0 82L40-111B8H0 82L40-111B7H0 105º left horizontal 40 4.84
82L40-11200H0 82L40-112C8H0 82L40-112B8H0 82L40-112B7H0 105º right horizontal 40 4.84
3,360 1,068
82L40-15100H0 82L40-151C8H0 82L40-151B8H0 82L40-151B7H0 96º left vertical 40 4.84
82L40-15200H0 82L40-152C8H0 82L40-152B8H0 82L40-152B7H0 96º right vertical 40 4.84
82L40-12300H0 82L40-123C8H0 82L40-123B8H0 82L40-123B7H0 105º both horizontal 40 4.84
82L40-16300H0 82L40-163C8H0 82L40-163B8H0 82L40-163B7H0 96º both vertical 40 4.84

82L25/32/40 with manual handle, additional dimensions
Pivot point
deep
IMPORTANT!
End position
control valves.
control sensor
View shows model for u-shaped clamp arm
Technical data (additional dimensions for models with hand lever)
Cylinder Port B1 B1a B3 B5 B7 B21 B23 B24 B28 B29 B35

Ø connector
Model no. G -0,5 ±0,1 ±0,1 ~ ~
82L25-1_ _ _H_ 25 G 1/8 35 35 3 4 25 63 53 75 9 21 6,3

82L32-1_ _ _H_ 32 G 1/8 46 34 – 4 20 69 54 96 9 21 9,3
82L40-1_ _ _H_ 40 G 1/4 40 40 – 6,5 25 63 64 113 9 21 10,3
D1 L1 L2 L3 L6 L7 L8 L9 L17 L35 R1 SW a1 a2
Model no. max. ±0,05 +0,1 ±0,1 ±0,1 h9
82L25-1_ _ _H_ M5 200 11 79 17 28 5 18 8,5 31 122 9 32º 113º

82L32-1_ _ _H_ M5 229 135 99 25 36 8 20 9,5 43 122 11 33.5º 108.5º
82L40-1_ _ _H_ M6 274 142 97 30 40 10 20 11 50 122 16 27º 87º
All dimensions shown in metric (mm).

Series 82L25-1, 82L32-1, 82L40-1, (with and without manual handle)
Wiring diagram for electrical sensing system
+brown black -blue white
Sensing system immune to interference from DC arc welding and AC
1 4 3 2
arc welding.
1 4 1 4 3 2
Plug M8x1 Inductive version: C8, B7, B8
2 3
yellow
Pin assignment
2 green red
Plug M12x1 3 1
4
open closed
S 0.1 S 0.2
Model No. Code for 82L..-1.......
Example Model No.: 82L32 – 1 03 B7 H 0 B
** 105° standard opening angle 00 = 0= Opening angle = base model

** 96° standard opening angle without sensing without hand lever limitation Power clamp
cover plate without
03 = U-shaped clamp arm 0 = Standard-
** central 90° 8AB-041-1 H= clamping arm to
with hand lever opening angle be marked with
43 = U-shaped clamp arm C8 = an additional
** central 180° with sensing 3 = 90° ‚B“
8EA-023-1 opening angle
11 = lateral clamp arm P&F M8x1
** 90°, mounted
for 82L32+82L40 4 = 75°
on the left
opening angle
12 = lateral clamp arm B7 =
** 90°, mounted with sensing 5 = 60°
on the right 8EA-060-1 opening angle
P&F M12x1
51 = lateral clamp arm 6 = 45°
for 82L32+82L40
** 180°, mounted
opening angle
on the left
82L25-1****_* B8 =
82L32-1****_* 52 = lateral clamp arm with sensing 7 = 30°
** 180°, mounted 8EA-031-1 opening angle
82L40-1****_* on the right P&F M12x1
for 82L32+82L40 Clamps wih reduced
23 = lateral clamp arm opening angle upon
** 90°, mounted request
on both sides B8 =
with sensing
63 = lateral clamp arm 8EA-033-1
** 180°, mounted Turck
on both sides for 82L25
Base Models Clamp Arms Sensing System
Attention: Combination of numbers only possible according to lists in this catalog.
Major spare parts for all 82L.. models
Order no. for base model Order no. for base model Order no. for base model
Specification 82L25-1....0.. 82L25-1....H.. 82L32-1....0.. 82L32-1....H.. 82L40-1....0.. 82L40-1....H..
Cylinder 8PW-030-1 8PW-042-1 8PW-015-1 8PW-043-1 8PW-016-1 8PW-044-1

Seal kit 8PW-030-1-00 8PW-030-1-00 8PW-015-1-00 8PW-015-1-00 8PW-016-1-00 8PW-016-1-00
End position sensors
C8 connecting plug M8 x 1, fixed – – 8EA-023-2 8EA-023-2 8EA-023-2 8EA-023-2

B8 connecting plug M12 x 1, with lead 8EA-033-2 8EA-033-2 8EA-031-1 8EA-031-1 8EA-031-1 8EA-031-1
B7 connecting plug M12 x 1, fixed – – 8EA-060-1 8EA-060-1 8EA-060-1 8EA-060-1
Manual handle – 8KB-031-1 – 8KB-031-1 – 8KB-032-1

Accessories, with or without manual handle
Order no. for base model Order no. for base model Order no. for base model
Specification 82L25-1....0.. /82L25-1....H.. 82L32-1....0.. /82L32-1....H.. 82L40-1....0.. /82L40-1....H..
Opening angle limitation spacer

96º 8CE-218-1 8CE-098-1 8CE-198-1
90º 8CE-216-1 8CE-096-1 8CE-196-1
75º 8CE-213-1 8CE-093-1 8CE-193-1
60º 8CE-211-1 8CE-091-1 8CE-191-1
45º 8CE-209-1 8CE-089-1 8CE-189-1
30º 8CE-207-1 8CE-087-1 8CE-187-1
Clamping arm
On-center U-shaped 8JG-075-3-01 8JG-065-2-01 8JG-067-2-01
Single arm – 8JG-066-1-01 8JG-068-1-01
Connector cable (1 connector socket & 5m cable)

Connector socket M8x1
straight, 4-pin
– 8EL-009-1 8EL-009-1

angular, 4-pin
– 8EL-007-1 8EL-007-1

straight, 5-pin
8EL-002-1 8EL-002-1 8EL-002-1

angular, 4-pin
8EL-003-1 8EL-003-1 8EL-003-1
Adaptor M8 x 1-to-M12 x 1, 4-pin, straight – 8EL-008-1 8EL-008-1
Adaptor for Ø25 tube systems

(clamps without hand lever only) 82ZB-012-01 82ZB-005-1
82ZB-005-1
Adapter for Ø25 tube system for

82L32-1...0.., 82L40-1...0.., 82ZB-005-1, 82ZB-006-1
for
B B1 B2 B3 B7a D D1 D1 L
±0,03
Model no. ±0,1 Ø H7
82ZB-005-1 50 26,4 16 19,6 30 25 5,5 6 62

82ZB-006-1 55 26,4 16 19,6 35 25 6,6 6 62
All dimensions shown in metric (mm).
View shows model 82L32-103...

Series 82L25-1, 82L32-1, 82L40-1, (with and without manual handle)
Adapter for Ø 25 tube system for 82L25-1...0..
82ZB-012-1
View shows model 82L25-103...

StrongHold clamping system
TM
StrongHold Clamping System
StrongHold SELECT
Series
MRO
Interchange
Reduced
Maintenance
Costs
StrongHold Standard
Series
Proven
Application
Performance
Robust
Products

TM
Product group – stronghold clamping system

Model no. Page Model no. Page

70250 15.18 030-1-S-2400 15.25
70260 030-1-D-2400
090-011-113 15.19 030-1-S-4000 15.26

090-012-221 030-1-D-4000
090-012-224
090-013-332
090-013-334
090-021-111
090-021-114
090-022-222
090-022-225 031-S-475 15.27
090-023-333 031-L-475
090-023-335 031-S-1100
031-L-1100
031-S-2400
031-L-2400
031-S-4000
031-L-4000
010-011-113 15.20 052-Series 15.29

010-012-221
010-012-224
010-013-332
010-013-334
010-021-111
010-021-114
010-022-222
010-022-225 051-Series 15.29
010-023-333
010-023-335
010-210-400 15.21 70626 15.30

010-210-501
010-210-702
010-211-002
010-211-004
010-211-502
010-211-504
010-212-004
030-1-S-475 15.23 020-011-011DE 15.31

030-1-D-475 020-012-021DE
020-013-031DE
030-1-S-1100 15.24 039-101-000DE 15.33

030-1-D-1100 039-104-000DE
039-108-000DE
039-109-000DE

Product group – stronghold clamping system
TM
Model no. Page Model no. Page
70150 15.34 500173DE 15.42
500174DE
100178DE 15.35 70912 15.43

100178-230DE 70913
100186DE 15.36
100186-230DE
100179DE 15.37
100179-230DE
100888DE 15.38
100888-230DE
100279DE 15.39
100920DE 15.40
100190DE
037-100-122 15.41

TM
Building safe workholding systems

Safety means paying attention to the smallest details. A hastily Use proper tools when
assembled workholding system can result in a hazardous operator bending tubing, and maintain
environment. Hydraulic workholding is not a generic technique where proper minimum bend radii for
most anything will work, nor is there one right or best answer for all hoses and tubing. If a hose or
situations. Each application is different and can be approached in tube is ever kinked, replace it.
many different ways. Because of this versatility, there is no rule-of- Don’t risk a rupture. Fluid
thumb to follow to guarantee safety. A careful balance of knowledge, escaping under high pressure is dangerous. The resulting loss in
fixture design and common sense are key to avoiding injuries. pressure could release the workpiece from the fixture and cause
serious injury and equipment damage by being ejected from the
Plan your fixture installation with operator safety in mind. By nature,
machine or breaking tooling.
most clamping devices have pinch points. Many times the fixture can
be designed to shield the operator from a pinching hazard. Often the Tubing and hoses do flex when
placement of the clamping device in the fixture can minimize the gap pressurized. Allow for that
between the clamp and the workpiece, thus reducing or eliminating movement by supporting the
the pinch point. Perhaps the clamping control valve or switch can be fluid lines away from surfaces
located such that the operator which could abrade the surface
cannot reach the fixture and eventually cause damage.
and the control at the same Avoid straight lengths of hose and tubing. A bend will allow for this
time. Dual palm buttons on deflection without putting too much stress on the line.
electrically-actuated systems Even if proper hydraulic tubing
serve the same purpose. and fittings are specified, be
Do not require the operator sure to protect them from
to hold the workpiece in position during the clamping operation. Make abuse. Components damaged
sure that the workpiece is self-supporting and self-locating so that from abrasion or accidental
operator hands are out of danger when the hydraulic system is dropping of a workpiece will no
actuated. Often a simple spring plunger is all that is necessary. longer have the strength and
safety of the original design.
The lowest pressure rating of any
component in the clamping system Use proper mounting hardware
sets the maximum pressure rating when installing workholding
for the entire system. clamps and other components.
Always use the largest bolt
Most hydraulic workholding
available to fit in the mounting
components are rated at 5,000
hole. In many cases, the
PSI maximum. However, some components are rated at less than 5,000
recommended cap screw or thread is specified on the product page
PSI. The maximum pressure is listed on each product page of this
of this catalog. Sometimes the mounting hardware is included with
catalog. Never exceed this rating.
the component. Always use supplied hardware.
Just having a clamp that is rated
at 5,000 PSI is not enough. Every
hose, fitting, valve, adapter and
tube exposed to pressure must be
rated at or above the maximum
hydraulic system pressure. Most
“hardware store” fittings are intended only for low pressure
plumbing. Never use water pipe fittings or copper tubing and brass Safety means
fittings for hydraulic service.
paying attention
to the
smallest details.

Power workholding systems
TM
Application A
Multiple double-acting actuators can be operated
simultaneously when powered by a pump.
Application B
Two pairs of single-acting actuators are independently
operated by remote mounted control valves and
powered by one pump. Check valves prevent return
line pressure fluctuations from affecting released
clamps. Pressure port “P” check valves are built into
the control valve.
Application C
Similar to Application C, one pair of single-acting
actuators and one pair of double-acting actuators
are independently controlled by 100969DE
directional control valves. When using more than
one directional valve in one circuit, “P” port check
valves 500174DE are required to prevent loss of
clamping pressure in one circuit while actuating
another. “T” port check valves 500173DE should be
used in single-acting circuits where return line
pressure fluctuations may affect released clamps.

TM

Application D
Rotating unions are used to connect pressure and
return lines on applications where fixture rotation
does not allow fixed plumbing. Here, three single-
acting actuators are independently operated by
three remote mounted control valves. Each valve is
connected to the rotating union which, in turn, is
connected to a single pump.
Application E
Two single-acting actuators operate simultaneously,
controlled by a remote manual valve. A sequence valve
insures that the workpiece is clamped before the work
support is locked.
Application F
Similar to Application B, (on page 15.8) the three actuators
are operated by a remote mounted control valve. This type
of valve allows the pump to be located away from the
workstation. The valve can be manually operated or, as
shown, an electrically operated remote control valve is
used. This valve can be used to give the operator push-
button convenience or fully automated control by the
machine tool.
Application G
Similar to Application F (above), a double-acting
swing clamp is actuated before sequencing a
work support. When released, the work support
drains back through the sequence valve’s
internal check valve.

TM
Application H
Like Application C (on page 2), two single-acting systems
are independently operated by remote mounted control
valves. Here the pressure reducing valve allows each
system to have its own maximum pressure. The cylinder
on the left operates at the pressure of the power source.
The cylinder on the right can be set at a lower pressure by
adjusting the pressure reducing valve.
Application I
DE-STA-CO’s Manual Pallet Valve is the
simplest way to disconnect the power source
from a pressurized pallet. For use only with
single-acting actuators, it provides an
automatic, leak free shut-off. An accumulator
makes up for temperature changes and
minor leakage. Built-in filtration protects this
valve from contamination.
Application J
For pallets using double-acting actuators,
DE-STA-CO’s double-acting pallet valve
system uses a pilot-operated check valve
to maintain pressure on the pallet. The
three position directional valve mounts at
the operator’s workstation instead of the
pallet. Any of DE-STA-CO’s standard,
constant pressure pumps operate the
system. An accumulator makes up for
temperature change and minor leakage.

TM
System design information

Planning
The most important and cost effective part of the fixture design process most of these components are commonly available, conventional
is planning. All facets of the project should be considered, and all mounting will typically be the lower cost option.
questions answered before fixture design begins.
How many operations are required?
What machine will be used?
Conventional
What is the expected cycle time?
Mounting
How many parts will be run? How often?
How fast must the workpiece be changed?
The answers to questions like these will help determine the relative
cost/benefit of the clamping system chosen for the fixture.
The following information will help prove that a hydraulic power
clamping system can be a cost effective fixturing alternative.
Hydraulic Force
A basic principle of hydraulics states that pressure applied to a confined The threaded ports are usually one of two designs, NPT tapered pipe
fluid is transmitted equally in all directions. This principle allows the threads or SAE O-Ring boss.
transmission of pressure through tubes and hoses to remotely located
actuators where that pressure is converted to usable force. NPT Tapered Pipe Threads depend on the interference of the mating
thread forms. This thread form has been in use for general plumbing
The simplicity of hydraulic power clamping can be summed up in one applications for many years. Consequently there is a wide selection of
small equation: fittings available for even the most unique applications. However, the
thread form is the same whether the application is a household water
FORCE = Pressure X Area
supply or a high pressure hydraulic workholding system. It is important
FORCE = to specify only fittings that are rated for the maximum pressure to be
6,000 lbs. Piston area = seen in your application. Plastic, copper and iron pipe fittings are not
3 square inches (Sq. In.) acceptable alternatives.
Straight Thread, O-Ring Boss Ports per SAE J514 are common in both
industrial and mobile hydraulic systems. Because this system of ports
and fittings depends on a simple, replaceable O-ring for sealing instead
Pressurized fluid = of the interference of perfectly formed threads, the chance for leakage
2,000 pounds per square inch (PSI) is greatly reduced.
Systems can be disassembled and reassembled numerous times with
no additional make-up required. Fittings will always be in the exact
In the cylinder above, the fluid pressurized at 2,000 PSI is acting on the same place and elbows will always point in the right direction. There is
3 sq. in. piston. As the formula says, 2,000 PSI times 3 sq. in. yields a never the need to over or under-tighten elbows to properly align them
force of 6,000 lbs. in your system.
This same concept applies to all hydraulic actuators. Pipe sealants and teflon tapes that can contaminate your system are
not required. The torque needed to properly tighten these fittings is
Plumbing Options less, too.
The method used to route the pressure to the actuators on the fixture
All of DE-STA-CO’s newest products have the SAE ports. In addition, we
should be determined early in the planning stage. The plumbing is an
have made many of our other products available with SAE ports. Where
essential part of the fixture and should never be left as an afterthought.
available, this is noted on the product description page.
There are two basic plumbing methods: conventional and
manifold mount.
Conventionally mounted components have threaded ports which accept
fittings for tubing and hoses. Many different types of fittings are
available, giving you several options for customizing your design. Since

TM
third and then the fourth, etc. When using a home run configuration,
you begin at a manifold and run hydraulic lines all the way from the
Manifold
manifold to each clamp.
Mounting
The daisy chain method uses less tubing so it might appear that this
would minimize back pressure. However, in the daisy chain the fluid
from all of the clamps must pass through a single hydraulic line. In the
home run, while there may be longer runs, each line only has to
accommodate flow from one clamp.
The viscosity of the hydraulic fluid used will also affect back pressure.
Viscosity is affected by temperature. Contact the factory to discuss
applications running below room temperature. We recommend using
Manifold mounted components eliminate the need for external fittings, only DE-STA-CO fluids. Other fluids may have different viscosities or
tubing, and hoses because the fluid passages are machined directly other characteristics that can adversely affect system operation.
into the fixture. Securing the workholding component to the fixture
automatically makes the hydraulic connection. Single-acting vs. Double-acting
Another decision to be made early in the planning stage is whether to
Manifold Mounting: use single-acting or double-acting components.
Provides no-tool hydraulic connections
Single-acting components are typically actuated using hydraulic
Saves valuable fixture space
pressure. When released, the pressure is removed and the actuator is
Eliminates tubes, hoses or fittings that disrupt coolant
returned by a spring which forces the hydraulic fluid back into the
flow and collect chips
pump reservoir. This type of system is usually the most cost effective
Simplifies post-machining fixture cleaning
because each actuator needs only one pressure source connection for
Reduces assembly and maintenance time
operation. Single-acting actuators should be vented to clean
Improves performance
atmosphere whenever appropriate. Remember to double the plumbing
Means fewer hydraulic connections resulting in fewer
for double-acting systems. This does, however, use more valuable
potential leak points
fixture space and adds to the cost.
Results in a cleaner, more professional-looking fixture
Nevertheless, there are good reasons to use double-acting systems.
Plumbing Sizing The larger and/or more complex the circuit design, the greater the
When designing and assembling your hydraulic system, keep in mind potential for return restrictions which will slow the return of the
that your choices of size and length of plumbing lines can significantly single-acting actuators. Double-acting actuators are ideal for
change the performance of your fixture. The back-pressure created by applications which require both pushing and pulling or returning
fittings, tubing and hoses can slow the operation of your system, especially clamps with heavy, custom designed attachments. They work well for
single-acting systems. Larger diameter plumbing runs with a minimum powering linkages which require fast actuation in both directions.
number of bends and fittings will reduce this back pressure.
Double-acting clamps are often used in automated systems where
When sizing hydraulic lines, make sure you look at the inside diameter: coordinating the action of the clamp with that of the rest of the system
1⁄4" hose is not the same as 1⁄4" tubing. Hose is specified by its inside requires fast, positive, predictable cycle times. By installing pressure
diameter. Hydraulic tubing is usually specified by the outside diameter. switches in both the pressure and return lines, the status of the clamp
As example, 1⁄4" O.D., .035" wall tubing has an inside diameter of can constantly be monitored.
.180", a flow carrying capacity of only 50% of that of the hose.
Single-acting clamps can develop only a limited amount of pressure to
force hydraulic fluid out of the clamp and allow it to retract. When the
return fluid from multiple clamps must share the same hydraulic line,
back pressure can easily become excessive and slow the
clamp’s retraction.
When connecting multiple clamps, you can use either a “daisy chain”
or “home run” configuration. In a daisy chain, you use a tee at each Single-acting Double-acting
clamp and run tubing from the first clamp to the second and then to the

TM

Automation
Hydraulic power clamping provides varying degrees of automation.
During the planning stage, the method of actuating the fixture must be
considered. The simplest systems use manually operated valves where
the operator turns a handle to clamp and unclamp the fixture. In totally
automated systems, the machine tool itself can be programmed to
control the clamping and unclamping functions through the use of
electric solenoid valves.
Positioning vs. Clamping

Hydraulic actuators are typically used on a fixture to perform one of two
functions: positioning or clamping. The primary purpose of a positioning
actuator is to push the workpiece against the solid positioning stops 3-2-1 Locating Principle
built into the fixture. Clamping actuators hold the workpiece in position One of the most basic concepts of workholding is referred to as the
during machining. 3-2-1 Locating Principle. To repeatedly locate (or reference) a workpiece,
it must be oriented and positioned in three planes: X, Y and Z.
With a properly designed fixture, all the operator needs to do is to place
the workpiece into the fixture. The positioning actuators (typically Thinking of a typical fixture where the workpiece is loaded and gravity
cylinders) will move and correctly orient the workpiece against the holds it in place during clamping, start with the Z axis. Knowing that
stops, and hold it there while the clamps are sequenced, thus securing three points define a plane, it follows that any rigid object in the fixture
the part to resist machining forces. While clamps are always needed is technically being supported at only three points regardless of shape.
to hold the part, positioning actuators are sometimes optional With the part supported in this manner, the workpiece is prevented from
depending on the workpiece, fixture design, and the level of moving in the Z direction, but is still free to rotate or slide in the X and
operator involvement. Y directions. To prevent rotation and position the workpiece in the Y
direction, two stops are used. With the part contacting three stops in the
Z axis, and two stops in the Y axis, the only direction the part can move
is in the X direction. A single stop is all that is needed to prevent this
motion. Always use three locators as the primary Z locators, two
secondary Y locators and one tertiary X locator; thus, the name 3-2-1
principle. In rigid parts, these are the only solid stops required to locate
the part. Any more are a duplication and can affect repeatability from
one part to the next.
Resisting Forces – Stops vs. Clamps

When designing the solid stops for a fixture, it is usually best to locate
them so that they directly resist the machining forces.
If the cutting tool forces are resisted by solid stops, the workholding
clamps need only hold the part in position and can typically be much
smaller, saving money and valuable fixture space.

TM
Torque vs. Tension Design Stroke Length
A user’s first introduction to hydraulic power workholding is often Clamps and cylinders should never be designed into a fixture at their
the replacement of the nut on a typical strap clamp with a center rated full stroke. Always use something less than full stroke to make
hole cylinder. sure that all tolerances and variations in the workpiece, workholding
device and fixture can be accepted, insuring that the workpiece is
If the torque of the nut is known, the resulting tension on the bolt or
properly clamped.
stud can be easily approximated.
Torque (In. Lbs.) Volume Calculations

= Tension (Lbs.) The total volume required to actuate a circuit should be checked to
Nominal thd. size (In.) X .12
make sure that the power source chosen has enough usable fluid
For example, a 1⁄2-13 UNC nut is torqued to 300-in. lbs. The resulting capacity. The fluid volume required to fully actuate each clamp and
approximate tension would be: cylinder is listed in the charts on each product page throughout the
300 catalog. By totaling this value for each component, you know the
= 5,000 lbs. Tension maximum fluid volume that could possibly be used in this fixture. Even
.5 x .12
the smallest DE-STA-CO pumps have enough fluid volume for most
The most accurate way to determine that the hydraulic power clamping
applications.
system is exactly duplicating the mechanical system is to place the
center hole cylinder over the stud or bolt and replace the nut loosely Since the fixture is designed to use less than the full stroke of the
over the cylinder. Use the hydraulic system to partially extend the actuators, the actual fluid volume will be less. If it becomes necessary
cylinder until it contacts the nut. Use a torque wrench to torque the nut to get an exact figure, it can be easily calculated using the
to its original value while monitoring the system pressure gauge. When following formula:
the nut is properly torqued, the gauge will indicate the exact system
pressure setting for this application. Effective Area (sq. in.) X Stroke (in.)
= Fluid Capacity (cu. in.)
From this:
The effective area of the actuators (from product chart) multiplied by
the stroke used (not total stroke) will result in the fluid volume.
For example, if a cylinder has an effective area of 2 square inches, and
an actual stroke of 3 inches, its fluid volume will be 2 x 3 or 6 cubic
inches. (For easy reference, 231 cubic inches = 1 gallon.)
To this:
System Care and Maintenance
The single most important factor in determining the life of a properly
designed system is the effort taken to keep the fluid clean.
Operating Pressures System Flushing

Most DE-STA-CO workholding components are rated at 5,000 PSI. During assembly, make sure all fluid-carrying components are flushed
When designing, it is a good rule of thumb to choose components for with clean solvent and blown dry. Hydraulic tubing is particularly
your fixture that will give you the forces you need at a pressure of about notorious for the amount of contaminants found inside. If not removed,
3,000 PSI. This gives you plenty of latitude to adjust the system this debris will quickly damage seals and score precision-fit metal
pressure both up and down when fine tuning the fixture on the machine parts. The contamination will also clog passages in pumps and
tool. Operating at lower pressures, while sometimes necessary, does control valves.
not make the most efficient use of these components. Higher pressures
After fixture assembly, the entire system should be flushed to remove
allow the use of smaller components, saving cost and fixture space.
any contamination created during assembly. Use only hydraulic fluid for
this procedure. Solvents may become trapped in the system,
contaminating the fluid.
Once the fluid in the system is clean, be sure to keep it that way by
changing the fluid on a regular basis and making sure that extreme
care is taken whenever the system is disconnected or disassembled so
that new contaminants are not introduced.

TM

System Bleeding Milling, Turning and Boring
Air trapped in the hydraulic system is the most common cause of erratic A rough estimate of cutting tool force – if the horsepower required to
operation and slow return times. The most common way to bleed a make the cut is known – is the result of the following equation:
system is to pressurize the circuit and carefully loosen a fitting just
HP x 24,750
enough to let fluid escape. The trapped air will usually be flushed out Cutting Force (lbs.) =
Cutting Speed (SFPM)
with the fluid. With conventionally mounted components, the fittings
required for connection provide ideal bleeding locations. Since manifold For example, an operation is expected to take 5 horsepower with a cutting
mounting eliminates external fittings and lines, the fixture speed of 150 surface feet per minute.
designer/builder no longer gets bleeding points by default and must
now consciously plan for system bleeding. 5 x 24,750
= 825 lbs. Cutting Force
150
As workholding hydraulic systems become more sophisticated, compact
and automated, proper bleeding becomes increasingly important. Air Where horsepower is not yet known, a value called unit power comes
trapped in the system is most often revealed by the slow retraction of into play. Unit power is the horsepower required to remove one cubic
single-acting (spring return) components. To understand why, picture inch of material in one minute. (Refer to Table A on Page 10.)
the following example:
Single-acting actuators – return springs develop 15 PSI Milling
Flow required to clamp – 1 cu. in.
System pressure – 3,000 PSI Depth of Cut (in.)
Feed per Tooth (in.)
Return time for this application is dictated by the time it takes to force Number of Teeth
Unit Power
1 cu. in. of fluid through all of the return line restrictions at 15 PSI.
___X___X___X___ X 125,950 = _____ lbs.
Take the same example with 1 cu. in. of air (at atmospheric pressure) Cutting Force
trapped anywhere in the system:
When pressurized, this “bubble” compresses and becomes Example: a 4-flute end mill is used to machine aluminum. The cut is
200 times smaller or .005 cu. in. This means that .995 cuin, 1⁄2" deep and the feed per tooth is .002". From the table the unit power
of oil must be pumped into the system just to compress the value is 0.4. So the cutting force transferred to the workpiece is:
bubble. Now when the clamps are released, 1.995 cu. in. of .5 x .002 x 4 x .4 x 125,950 = 202 lbs.
fluid must leave the system – nearly double that of the same Cutting Force
system without air.
Note that this calculation assumes a full width cut. Applications using
Calculating Machining Forces
less than the full cut may reduce the calculated force by the percentage
To help you choose the right cylinders, clamps, and work supports, it is
of the full cut being taken.
important to know how much clamping or supporting force
is necessary.
Turning and Boring
There are numerous ways to calculate the approximate forces that the A similar calculation applies to turning and boring. Note that the cutting
cutting tool places on the workpiece. Please note that the results of force is usually perpendicular to the cutting tool but since the tool or
these calculations are estimates and must never replace experience, workpiece is rotating, the direction of the force relative to the work
common sense, and caution. In addition, these results indicate only the piece is constantly changing.
magnitude of the force, not the direction. Depending on the specific
application, the direction of the force may vary significantly from the
beginning to the end of the cut.

TM
Static Friction Coefficients
for Steel on Various Materials
Force Friction Coefficient
Material Clean Lubricated
Cutting Brass 0.35 0.19
Tool
Bronze – 0.16
Bronze, Aluminum 0.45 –
Bronze, Phosphor 0.35 –
Bronze, Sintered – 0.13
Depth of Cut (in.) Carbon, Hard 0.14 0.11-0.14
Feed per Revolution (in.) Copper-Lead Alloy 0.22 –
Unit Power
Graphite 0.10 0.10
____X____X____X 396,000 = _____ lbs. Iron, Cast 0.40 0.21
Cutting Force
Steel 0.80 0.16
Tungsten Carbide 0.4-0.6 0.1-0.2
Example: Boring a hole in alloy steel heat treated to 37 Rc (unit power
1.7), with a depth of cut of .060", a feed rate of .003" inches per The estimated clamping force is divided by the appropriate friction
revolution gives a result of: coefficient and then multiplied by a suitable safety factor to get an
estimated total clamping force required.
.060 x .003 X 1.7 x 396,000 = 121 lbs. Cutting Force
Machining Force (lbs.)
Drilling x Safety Factor = Total
Friction Coefficient
The forces involved in drilling can be separated into two distinctly Clamping
different categories: thrust and torque. With the number of drill styles Force (Lbs.)
available, the thrust varies tremendously. Torque is somewhat less Example: A steel workpiece on steel rest buttons is being machined
variable and can be estimated as shown: using coolant. The estimated machining force is 300 lbs. From the table
the friction coefficient for steel on steel (lubricated) is .16. After
Feed (IPR) x (Drill Dia.)2 x Unit Power x 49,500 =
choosing an appropriate safety factor (usually about 2), the estimated
Drilling Torque (In. Lbs.)
total clamping force would be:
For example, drilling a 3⁄4” diameter hole in magnesium (unit power .2) 300
with a feed rate of .010” per revolution gives a result of: x 2 = 3750 lbs. Total Clamping Forces
.16
3
Unit Power hp/in /min
.010 x .752 x .2 x 49,500 = 56 in. lbs. This total clamping TABLE A
Turning Drilling Milling
Friction Coefficient force may now be Hardness HSS & HSS HSS &
Now that an estimate of the amount of cutter force being transferred to divided by the Carbide Drills Carbide
Material Bhn Tools Tools
the workpiece is available, we must determine how much clamping number of clamps
STEELS 85-200 1.4 1.3 1.4
force is necessary to resist the cutter force. This depends on the holding the Plain 35-40Rc 1.7 1.7 1.9
amount of friction between the workpiece and the fixture, commonly workpiece, which Carbon 40-50Rc 1.9 2.1 2.2
Alloy Steels 50-55Rc 2.5 2.6 2.6
referred to as the friction coefficient. equals the clamping 55-58Rc 4.2 3.2 3.2
force needed for
Typically, if an object is lying on a surface, the amount of force required CAST IRONS 110-190 0.9 1.2 0.8
each clamp. Gray, Ductile 190-320 1.7 2.0 1.4
to slide it sideways will be considerably less than the weight of the & Malleable
object. It follows then that when clamping a workpiece to resist STAINLESS 135-275 1.6 1.4 1.7
STEELS 30-45Rc 1.7 1.5 1.9
machining forces, the clamping force will need to be much higher than
TITANIUM 250-375 1.5 1.4 1.4
the machining force. The following chart shows approximate
NICKEL 80-360 2.5 2.2 2.4
friction coefficients: ALLOYS
ALUMINUM 30-150 0.3 0.2 0.4
ALLOYS 500 kg
MAGNESIUM 40-90 0.2 0.2 0.2
ALLOYS 500 kg
COPPER 10-80Rb 0.8 0.6 0.8
ALLOYS 80-100Rb 1.2 1.0 1.2

TM
Design symbols
Cylinder Symbols Work Support Symbols
Cylinder, Single-acting Work Support, Spring Advance
Cylinder, Double-acting
Work Support, Air Advance
Cylinder, Single-acting or Swing/Pull

Power Source Symbols
Clamp,Double-acting
M Electric/Hydraulic Pump
Pull Cylinder, Single-acting, Spring Return Air/Hydraulic Pump, Reciprocating
Air/Hydraulic Pump,
Pull Cylinder, Single-acting Reciprocating 2-stage
Clamp Symbols
Screw Pump
Swing/Pull Clamp, Single-acting

with Flow Restrictor Valve
Intensifier
Swing/Pull Clamp, Double-acting Control Valve Symbols
Directional Control Valve, Manual 4-Way,

2-Position with Inlet Check Valve
Swing/Pull Clamp, Single-acting
2-Position with Inlet and Outlet Check Valves
Work Support Symbols
A B
3-Position Detented
P T
Directional Control Valve, Electric 4-Way,

Work Support, Fluid Advance
2-Position with Inlet and Outlet Check Valves
with Manual Override

2-Position

Design symbols
TM
Control Valve Symbols Accessory Symbols
Pressure Sequence Valve, Adjustable with Check Valve

Reverse Free-Flow Check Valve
Flow Restrictor, Fitted with Reverse

Free-Flow Check Valve with
Pressure Reducing Valve, Adjustable with Reverse Filtered Orifice
Free-Flow Check Valve w/Over-Pressure Relief Valve
Hydraulic Coupler Set, Uncoupled

Check Valve, Pilot Operated with Filters
Accumulator, Gas Charged

Flow Restrictor, Adjustable with Reverse
Free-Flow Check Valve
Filter
Flow Restrictor, Adjustable
Pressure Gauge
Pallet Coupling Symbols
Manual Pallet Valve with Gauge Rotating Union, Dual Circuit

and Male Coupler
Manual Pallet Valve with Filters, Rotating Union, Single Circuit

Gauge and Coupler
Pressure Switch, Adjustable
Accessory Symbols
A B
Hydraulic Coupler, Half-Male or Female
Check Valve Sub-Plate
P T
Hydraulic Coupler Set, Coupled
Air Bleed Valve
Ball Valve

TM
StrongHold SELECT

TM
Introducing

StrongHold SELECT
Workholding Products from
DE-STA-CO.
The new StrongHold SELECT series brings you hydraulic swing clamps, threaded body cylinders,
block cylinders and accessories.
Immediate advantages include:
MRO Interchange: Flexibility to upgrade and interchange
with other brands, or use in new/duplicate fixture designs
Long-life, decreased maintenance: Advanced seal and
wiper technology that resist contamination and leaks
Corrosion resistance: Treated metal surfaces for better wear
Reduced maintenance costs: High cycle life with less

down time, lower replacement costs
Productivity improvement: Significant set-up time reduction
as operators can clamp entire fixture from one location
Competitive pricing: Better quality components with higher ROI
Our new StrongHold SELECT series is yet another example by DE-STA-CO making the best even
better. Improving upon our existing StrongHold brand, we continue to design products and
expand our product selection that help you, our customers, achieve tangible cost reduction in
your manufacturing process.
We look forward to working with you!
DE-STA-CO is a global leader in the innovation, manufacture, and support of clamping, gripping, transfer and robotic tooling
solutions for workplace automation needs. The DE-STA-CO family of companies is committed to being a lean resource for its
customers. Our wide range of products and value-added services allows us to offer you solutions that increase profitability and
efficiency through the use of optimal clamping and automation solutions.

TM
Hydraulic Cylinder
Block Style
Hydraulic
Cylinder
A
B L
J
N
C G D
H E F K
M
Dimensions (In Inches)

Model no. A B C D E F G H J K L M N
70250
2.81 2.50 0.31 1.63 0.56 0.75 1.16 1.00 0.50 1/8 NPT 1/8 NPT 0.25 –
(Single-acting)
70260
3.13 2.88 0.50 2.00 0.25 1.25 1.50 1.25 0.63 1/8 NPT (2) 1/8 NPT (2) 0.25 5/16-18
(Double-acting)
Force at Force at Effective Effective

3,000 PSIG 3,000 PSIG Area Area Oil
Model no. Stroke Extend Retract Clamping Unclamping Displacement
70250 0.50 1,325 lbs. – 0.44 – 0.221 cu. in.
0.24
70260 1.00 1,325 lbs. 763 lbs. 0.44 Extend 0.45 cu. in.
Retract 0.25 cu. in.

StrongHold SELECT Block Cylinders
TM
DE-STA-CO’s Single-acting (spring return) and Double-acting Block Cylinders are designed for punching,
pressing, riveting and bending applications. These block cylinders require no special mounting hardware
and can be dual-position mounted (parallel or perpendicular) to piston travel on every model.
Tapped piston-ends allow the use of custom end attachments (double-acting recommended for
attachments or mechanisms), while a vent port featuring a single-acting filter gives the cylinder a
place to “breathe” and helps keep chips and other contaminants from sucking past the wipers
(double-acting unclamp port).
Adjustable force ranging from “negligible” to maximum cylinder capacity is achieved by adjusting the
input pressure. Advanced side-porting is provided for easy plumbing access.
Features:
Variety of strokes to meet specific
design needs
SAE oil ports
No special mounting
hardware required
Operating Pressure –
150 to 5,000 PSI
Single-acting Block Cylinders Double-acting Block Cylinders

Force at Effective Oil Force at Effective Oil
5,000 Area Capacity 5,000 Area Capacity
PSI (lbs.) Bore Rod (sq. in.) (cu. in.) PSI (lbs.) Bore Rod (sq. in.) (cu. in.)
ø ø Stroke ø ø Stroke
Cat no. Push (in.) (in.) (in.) Push Push Cat no. Push Pull (in.) (in.) (in.) Push Pull Push Pull
090-011-113 2,220 0.750 0.437 0.380 0.442 0.168 090-021-111 2,220 1,400 0.750 0.437 0.630 0.442 0.292 0.279 0.184
090-012-221 3,900 1.000 0.625 0.270 0.785 0.212 090-021-114 2,220 1,400 0.750 0.437 1.500 0.442 0.292 0.663 0.438
090-012-224 3,900 1.000 0.625 0.600 0.785 0.471 090-022-222 3,900 2,390 1.000 0.625 0.790 0.785 0.478 0.620 0.378
090-013-332 8,800 1.500 1.000 0.297 1.767 0.525 090-022-225 3,900 2,390 1.000 0.625 2.000 0.785 0.478 1.570 0.956
090-013-334 8,800 1.500 1.000 0.447 1.767 0.789 090-023-333 8,800 4,900 1.500 1.000 1.000 1.767 0.982 1.767 0.982
090-023-335 8,800 4,900 1.500 1.000 2.000 1.767 0.982 3.534 1.964
Dimension Chart – Single & Double-acting Block Cylinders

Cat. no. Cat. no. Double
Single Acting Acting A (S.ACT.) A (D.ACT.) B C D E F G H I J K L M O P R S T V
– 090-021-111 – 3.078 2.448 2.128 2.360 0.375 0.437 SAE#4 0 0.756 1.206 0.295 1.770 0.980 1/4-20UNC 1.570 0.785 0.900 1.180 0.280
090-011-113 090-021-114 3.698 4.818 3.318 2.998 2.360 0.375 0.437 SAE#4 2.058 0.756 1.248 0.295 1.770 0.980 1/4-20UNC 1.570 0.785 1.770 1.180 0.280
090-012-221 090-022-222 30031 3.551 2.761 2.441 2.559 0.500 0.625 SAE#4 0 0.788 1.378 0.295 1.969 1.181 5/16-24UNF 1.772 0.886 1.181 1.280 0.350
090-012-224 090-022-225 4.571 5.971 3.971 3.651 2.559 0.500 0.625 SAE#4 2.558 0.788 1.378 0.295 1.969 1.181 5/16-24UNF 1.772 0.886 2.391 1.280 0.350
090-013-332 090-023-333 3.472 4.175 3.175 2.680 3.150 0.835 1.000 SAE#4 0 0.708 1.420 0.374 2.403 1.548 1/2-13UNC 2.295 1.148 1.500 1.575 0.391
090-013-334 090-023-335 4.622 6.175 4.175 3.680 3.150 0.835 1.000 SAE#4 2.620 0.708 1.440 0.374 2.403 1.548 1/2-13UNC 2.295 1.148 2.500 1.575 0.391

StrongHold SELECT
TM
Threaded Body Cylinders

DE-STA-CO’s Single-acting (spring return) and Double-acting Threaded Cylinders are extremely
versatile and durable. They can be designed into a variety of high production applications including
workpiece positioning, holding and ejecting applications where space is at a premium.
Double-acting cylinders assure complete powered retraction for CNC controlled operations (where time
is critical) or when using heavy end effectors. Double-acting models are also suited to manufacturing
applications, such as production punching.
Single-acting cylinders should be used with small end effectors
only and where retraction speed is not critical. S
K
Features:
Variety of sizes that support precise
P
fixture designs T
Springs are designed to return the
cylinder and contact points, not
intended to pull mechanisms.
SAE fluid ports are common to all models
Operating Pressure – 150 to 5,000 PSI A
B
C
C1
D
G
G (S/A Vent Plug) L M
Single-acting Threaded Cylinders Double-acting Threaded Cylinders

Force at Effective Oil Force at Effective Oil
5,000 Area Capacity 5,000 Area Capacity
PSI (lbs.) Bore Rod (sq. in.) (cu. in.) PSI (lbs.) Bore Rod (sq. in.) (cu. in.)
ø ø ø ø
Stroke Stroke
Cat no. Push (in.) (in.) Push Push Cat no. Push Pull (in.) (in.) Push Pull Push Pull
(in.) (in.)
010-011-113 2,220 0.750 0.437 0.380 0.442 0.168 010-021-111 2,220 1,400 0.750 0.437 0.630 0.442 0.292 0.279 0.184
010-012-221 3,900 1.000 0.625 0.270 0.785 0.212 010-021-114 2,220 1,400 0.750 0.437 1.500 0.442 0.292 0.663 0.438
010-012-224 3,900 1.000 0.625 0.600 0.785 0.471 010-022-222 3,900 2,390 1.000 0.625 0.790 0.785 0.478 0.620 0.378
010-013-332 8,800 1.500 1.000 0.297 1.767 0.525 010-022-225 3,900 2,390 1.000 0.625 2.000 0.785 0.478 1.570 0.956
010-013-334 8,800 1.500 1.000 0.447 1.767 0.789 010-023-333 8,800 4,900 1.500 1.000 1.000 1.767 0.982 1.767 0.982
010-023-335 8,800 4,900 1.500 1.000 2.000 1.767 0.982 3.534 1.964
Dimension Chart – Single & Double-acting Threaded Cylinders
Cat. no. Cat. no. Dimensions (In Inches)

Single Acting Double Acting A (S.ACT.) B C C1 D D1 E F G K L M P S T
A (D.ACT.)
– 010-021-111 – 3.444 2.814 2.494 0.625 1.750-16UN 1.564 0.437 1.375 SAE#4 1/4-20UNC 0.422 0.390 0.200 0.375 0.500
010-011-113 010-021-114 4.064 5.184 3.684 3.364 0.625 1.750-16-UN 1.564 0.437 1.375 SAE#4 1/4-20UNC 0.422 0.390 0.200 0.375 0.500
010-012-221 010-022-222 3.465 3.985 3.195 2.875 0.625 1.875-16UN 1.730 0.625 1.610 SAE#4 5/16-24UNC 0.530 0.390 0.200 0.500 0.625
010-012-224 010-022-225 5.005 6.405 4.405 4.085 0.625 1.875-16UN 1.730 0.625 1.610 SAE#4 5/16-24UNC 0.530 0.390 0.200 0.500 0.625
010-013-332 010-023-333 3.917 4.620 3.620 3.125 0.690 2.500-16UN 2.375 1.000 2.250 SAE#4 1/2-13UNC 0.800 0.550 0.375 0.835 0.625
010-013-334 010-023-335 5.067 6.620 4.620 4.125 0.690 2.500-16UN 2.350 1.000 2.250 SAE#4 1/2-13UNC 0.800 0.550 0.375 0.835 0.625

Threaded Cylinders – SAE Ports
TM
Models 010-210-XXX, 010-211-XXX, 010-212-XXX
The single-action, spring-return hydraulic power cylinders are small pistons that
can be used singly or combined. They offer tremendous force in a small, easily
mounted package that can be used in any attitude and requires only a single inlet
port. They are often used grouped together by a common manifold to provide as
much force as needed for the operation. For a relatively small volume of oil, they
provide exceptional exerting force, and are generally the best choice if stroke
lengths can be kept short.
Features:
Threaded body for easy mounting
Small size permits “low profile” workholding
Accessories available for easy mounting
Available in metric or inch sizes (Metric on special request)
Hardened piston and rod
Single-acting for simple plumbing
Wide variety of sizes and strokes
Pressure capacity up to 5,000 PSIG,
provided piston does not bottom out
H (PORTING) F (THREAD)
D
E OG
B C J (FEMALE THREAD)
Model no. A B C D E F G H J
010-210-400 1.66 1.41 0.19 0.22 0.44 Hex 1/2-20 0.15 SAE #2 –
010-210-501 2.25 1.97 0.22 0.31 0.62 Hex 3/4-16 0.22 SAE #4 –
010-210-702 2.56 2.31 0.31 0.50 0.75 Hex 1-12 0.24 SAE #4 –
010-211-002 2.63 2.25 0.13 0.50 1.00 Hex 1 5/16-16 0.64 SAE #4 1/4-20
010-211-004 3.63 3.25 0.12 1.00 1.00 Hex 1 5/16-16 0.64 SAE #4 1/4-20
010-211-502 2.94 2.57 0.13 0.50 1.50 Hex 1 7/8-16 1.00 SAE #4 5/16-18
010-211-504 4.59 4.22 0.14 1.00 1.50 Hex 1 7/8-16 1.00 SAE #4 5/16-18
010-212-004 4.13 3.76 0.13 1.00 2.00 Hex 2 1/2-16 1.50 SAE #4 5/16-18

TM
Threaded Cylinders – SAE Ports

Threaded Force at Oil Effective Area

Model no. SAE Ports Body Stoke 3,000 PSIG Displacement For Clamping Jamnuts
010-210-400 #2 1/2-20 0.22 279 lbs. 0.024 cu. in. 0.110 Furnished
010-210-501 #4 3/4-16 0.31 588 lbs. 0.061 cu. in. 0.196 Furnished
010-210-702 #4 1-12 0.50 1,326 lbs. 0.221 cu. in. 0.442 Furnished
010-211-002 #4 1 5/16-16 0.50 2,355 lbs. 0.393 cu. in. 0.785 Optional
Flange Mount
Flange Mount
052-Series
ØD B C
Model no. A B C øD E
052-106-160 1 1/16-16 UN 2B 1.37 0.50 0.22 1.030

052-112-160 1 1/8-16 UN 2B 1.50 0.50 0.22 1.120
E 052-125-120 1 1/4-12 UN 2B 1.62 0.50 0.27 1.200
A 052-131-160 1 5/16-16 UN 2B 1.69 0.50 0.27 1.250
052-137-160 1 3/8-16 UN 2B 1.75 0.50 0.27 1.340
052-137-180 1 3/8-18 UN 2B 1.75 0.50 0.27 1.340
052-150-160 1 1/2-16 UN 2B 1.88 0.75 0.27 1.480
052-175-160 1 3/4-16 UN 2B 2.25 0.75 0.34 1.770
052-187-160 1 7/8-16 UN 2B 2.25 1.00 0.34 1.770
052-225-160 2 1/4-16 UN 2B 2.63 1.00 0.34 1.970
052-250-160 2 1/2-16 UN 2B 3.00 1.00 0.34 2.170
052-262-200 2 5/8-20 UN 2B 3.38 1.25 0.40 2.375
052-312-160 3 1/8-16 UN 2B 3.88 1.25 0.40 2.780
Jam Nut
Jam Nuts
051-Series
D C
Model no. A B C D E
A E
051-106-160 1 1/16-16 UN 2B 1.438 0.31 0.188 0.188
051-112-160 1 1/8-16 UN 2B 1.500 0.31 0.250 0.250
051-125-120 1 1/4-12 UN 2B 1.625 0.31 0.250 0.250
051-131-160 1 5/16-16 UN 2B 1.688 0.31 0.250 0.250
051-137-160 1 3/8-16 UN 2B 1.875 0.31 0.250 0.250
051-137-180 1 3/8-18 UN 2B 1.875 0.31 0.250 0.250
ØB
051-150-160 1 1/2-16 UN 2B 2.000 0.38 0.275 0.275
051-175-160 1 3/4-16 UN 2B 2.500 0.38 0.312 0.312
051-187-160 1 7/8-16 UN 2B 2.625 0.38 0.312 0.312
051-225-160 2 1/4-16 UN 2B 3.000 0.50 0.312 0.312
051-250-160 2 1/2-16 UN 2B 3.250 0.50 0.312 0.312
051-262-200 2 5/8-20 UN 2B 3.375 0.50 0.375 0.375
051-312-160 3 1/8-16 UN 2B 3.875 0.50 0.375 0.375
Jam Nut
Model 70975
1 5/16-18 THREAD
0.50 1.88 HEX

StrongHold SELECT Hyd. Swing/Pull Clamps – 475 lb.
TM
The DE-STA-CO StrongHold SELECT Threaded Body Swing/Pull Clamps are available in both
single-acting and double-acting versions. They incorporate the latest hydraulic swing clamp
030-1-S-475 technology. The top port design allows easy access for plumbing connections. They are available
with 90° left or right hand rotation, or with guided straight pull. The breather port on single-acting
models may be replaced with tubing for remote venting. The optional arms clamp securely to the
piston rod to reduce fatigue and deflection. Arms may be easily modified or custom arms may be
substituted.
SELECT Features Include:
Advanced seals and wipers utilize a special, highly wear-resistant construction for long cycle
life and 5,000 PSI operation
Triple track piston rod design for field adjustable swing direction
Hardened and hard chrome plated piston rod for increased strength and wear resistance
Advanced metal treated body for superior wear and corrosion resistance
MRO interchange design
T
Straight pull capacity 600 lbs. E Port
030-1-D-475 U
at 5,000 PSI max
25°
S 50°
D Port
For 475 lb. L
600 Swing/Pull Clamp Arms

see Page 15.27
500 K
Clamping Force (Lbs.)
400
300 A
B
200 N R
100 C
Q
J
0
0 1000 2000 3000 4000 5000 M P
Hydraulic Pressure (PSI)
H
Performance
G F
With 031-L-475 Arm (3.25" long)
With 0-31-S-475 Arm (1.22" long)
Straight Pull
Specifications Ordering Notes:

Left hand swing (ccw) is standard
Eff. Area Oil Cap. Max
Oil Flow – no suffix
(sq. In.) (cu. In.)
*Force in3/m Add –R suffix for right hand swing
Cat. no. Oper. Swing Direction (lbs.) Clamp Unclamp Clamp Unclamp in Add –S suffix for straight guided pull
Single- Left Hand (Counter Clockwise) We will assemble and mark them
030-1-S-475 (-X) – –
Acting
Right Hand (Clockwise) 475 12 that way.
Double- 0.12 0.08
030-1-D-475 (-X) Straight Pull ▲ 0.24 0.15
acting
▲ Additional swing directions available upon request
Specifications
A B D E
Total Clamping Clamp Unclamp
Cat. no. Stroke Stroke C Port Port F G H J K L M N P Q R S T U
030-1-S-475 0.65 0.210 0.59

SAE-2 SAE-2 1.929 2.086 3.07 4.429 0.8 M6x1 0.157 0.393 1-1/8-16UN 4.96 0.495 1.3 1.55 0.61
030-1-D-475 0.65 0.32 0.59
NOTE: *With 1.22" long arm at 5,000 PSI maximum operating pressure.
▲
Do not pressurize – single-acting only
† See page 15.35 for arms, accessories and custom arm mounting

StrongHold SELECT
TM
Hyd. Swing/Pull Clamps – 1,100 lb.

030-1-S-1100 technology. The top port design allows easy access for plumbing connections.
They are available with 90° left or right hand rotation, or with guided straight pull. The breather port
on single-acting models may be replaced with tubing for remote venting. The optional arms clamp
securely to the piston rod to reduce fatigue and deflection. Arms may be easily modified or custom
arms may be substituted.
Advanced seals and wipers utilize a special, highly wear-resistant construction for long cycle life
and 5,000 PSI operation
MRO interchange design T
E Port
030-1-D-1100 Straight pull capacity U
1,400 lbs. at 5,000 PSI max.
25°
S 50°
D Port
For 1,100 lb.
L
Swing/Pull Clamp Arms
1600 see Page 15.27
1400 K
1200
A
800 B
400 N R
C
0 Q
0 1000 2000 3000 4000 5000 J
M P
Performance
H
With 031-L-1100 Arm (5.31" long)
With 031-S-1100 Arm (1.89" long) G F
Straight Pull

(sq. in.) (cu. in.)
Cat. no. Oper. Swing Direction (lbs.) Clamp Unclamp Clamp Unclamp in
Add –S suffix for straight guided pull
030-1-S-1100 (-X) – –
Acting
Double-
030-1-D-1100 (-X) Straight Pull ▲ 0.28 0.59 0.25 0.52
acting
Specifications
A B D E
Total Clamping Clamp Unclamp
Cat. no. Stroke Stroke C Port Port F G H J K L M N P Q R S T U
030-1-S-1100
0.89 0.39 0.6 SAE-4 SAE-4 2.4 2.6 3.58 5.305 0.94 M8 x 1.25 0.196 0.629 1-3/8-18UN 5.965 0.400 1.5 1.87 0.75
030-1-D-1100
▲

StrongHold SELECT Hyd. Swing/Pull Clamps – 2,400 lb.
TM
030-1-S-2400
technology. The top port design allows easy access for plumbing connections.
They are available with 90° left or right hand rotation, or with guided straight pull. The breather
port on single-acting models may be replaced with tubing for remote venting. The optional arms
clamp securely to the piston rod to reduce fatigue and deflection. Arms may be easily modified
or custom arms may be substituted.
Advanced seals and wipers utilize a special, highly wear-resistant construction for long cycle
life and 5,000 PSI operation
MRO interchange design T
E Port
Straight pull capacity U
3,150 lbs. at 5,000 PSI max.
25°
S 50°
030-1-D-2400
D Port
For 2,400 lb.
L
Swing/Pull Clamp Arms
3500
see Page 15.27
3000 K
2500
2000 A
B
1500 N R
C
1000 Q
J
0
0 1000 2000 3000 4000 5000 M P
H
Performance
G F
With 031-L-2400 Arm (6.36" long)
With 031-S-2400 Arm (2.43" long)
Straight Pull

(sq.iIn.) (cu. in.)
Cat. no. Oper. Swing Direction (lbs.) Clamp Unclamp Clamp Unclamp in Add –S suffix for straight guided pull
030-1-S-2400 (-X) – –
Acting
Double- 0.63 0.7
030-1-D-2400 (-X)
acting Straight Pull ▲ 1.23 1.40
Specifications
A B D
Total Clamping Clamp
Cat. no. Stroke Stroke C Port F G H J K L M N P Q R S T U
030-1-S-2400
1.12 0.5 0.62 SAE-4 SAE-4 3.18 3.38 4.38 6.8 1.28 M10x1.5 0.196 0.87 1-7/8-16UN 7.543 0.517 2.0 2.38 1.0
030-1-D-2400
NOTE: *With 2.43” long arm at 5,000 PSI maximum operating pressure.
▲

StrongHold SELECT
TM
Hyd. Swing/Pull Clamps – 4,000 lb. NEW

The DE-STA-CO StrongHold SELECT Threaded Body Swing/Pull Clamps are available in both single-
acting and double-acting versions. They incorporate the latest hydraulic swing clamp technology. The
030-1-S-4000
top port design allows easy access for plumbing connections.
They are available with 90° left or right hand rotation, or with guided straight pull. The breather port
on single-acting models may be replaced with tubing for remote venting. The optional arms clamp
securely to the piston rod to reduce fatigue and deflection. Arms may be easily modified or custom
arms may be substituted.
Advanced seals and wipers utilize a special, highly wear-resistant construction for long cycle life
and 5,000 PSI operation
Triple track guide rod design incorporates three balls engaged in three tracks for increased cycle
life. Swing direction can be field converted by replacing the guide rod
MRO interchange design
Straight pull capacity 5,500 lbs.
at 5,000 PSI max. T
030-1-D-4000 U
25° For 4,000 lb.

50° S Swing/Pull Clamp Arms
5000 see Page 15.28
4500
L
4000
Clamping Force (l bs.)
3500
3000
2500 K
2000
1500
1000 0N B A
500
0
0 1000 2000 3000 4000 5000 Q C
J R
Performance H
M
G
With 031-L-4000 Arm (7.01"
(X.XX" long)
long) F
With 031-S-4000 Arm (2.75"
(X.XX" long)
long)
Straight Pull

Max Left hand swing (ccw) is standard
Eff. Area Oil Cap.
(sq. in.) (cu. in.) Oil Flow – no suffix
Cat. no. Oper. Swing Direction (lbs.) Clamp Unclamp Clamp Unclamp in
Add –S suffix for straight guided pull
Single- Left Hand (Counter Clockwise)
030-1-S-4000(-X)
Acting
– – We will assemble and mark them
Double- 1.10 1.22
030-1-D-4000(-X) Straight Pull 2.35 2.60
acting
Specifications
A B D
Total Clamping Clamp
Cat. no. Stroke Stroke C Port F G H J K L M N P Q R S T U
030-1-S-4000
1.07 0.45 0.75 SAE#4 SAE#4 2.70 2.83 4.09 6.67 0.64 1.61 0.14 1.26 2-1/2-16UN 7.30 0.33 2.56 2.99 1.28
030-1-D-4000
▲

StrongHold SELECT Hyd. Swing/Pull Clamp 475-2,400 lb. Arms
TM
T P Custom built arms of any length must clamp to the swing/pull
clamp’s piston rod in a manner similar to the DE-STA-CO arms
G
or some derating of the clamp will be necessary.
D
The design feature “K,” in the chart and drawing at the
C U bottom of this page, is recommended for all applications of
A custom, single arms. See the accompanying chart for design
Q
H
details. In applications where there is no bending stress being
transferred into the piston rod (like push/pull linkages and
equalizing double arms), this design detail may be eliminated. In
I K
N
J these applications, the clamp’s full capacity (referred to as
“straight pull” capacity) is available.
L
O
M
Swing/Pull Clamp Arm
Specifications
Weight
Cat. no. A B C D G H I J K L M N O P Q T U (lbs.)
031-S-475 1.929 0.709 M6 0.63 1.139 0.394 0.630 0.236 0.217 0.394 0.394 0.256 0.984 M6 0.236 1.220 0.159
031-L-475 3.959 0.709 – 0.63 1.166 0.394 0.630 0.236 0.217 0.394 0.394 0.256 – M6 – 3.250 0.348
031-S-1100 2.598 0.709 M8 0.748 1.294 0.433 0.748 0.236 0.217 0.630 0.472 0.33 1.575 M6 0.315 1.889 0.286
031-L-1100 6.019 0.709 – 0.748 0.126 1.412 0.433 0.748 0.236 0.217 0.630 0.472 0.335 – M6 – 5.310 0.721
031-S-2400 3.268 0.866 M10 1.125 1.459 0.633 1.00 0.236 0.217 0.866 0.709 0.413 1.969 M8 0.433 2.402 0.634
031-L-2400 7.226 0.866 – 1.125 1.696 0.633 1.00 0.236 0.217 0.866 0.709 0.413 – M8 – 6.360 1.564
IMPORTANT: Any clamp using a modified or custom arm that is longer or heavier than DE-STA-CO’s standard arms must be
derated to prevent internal damage.
Do not exceed the maximum speed and pressure ratings for DE-STA-CO’s standard arms. For maximum hydraulic
pressure and speed ratings, see the accompanying charts
Do not use meter-out circuitry for controlling double-acting clamp speeds
Contact DE-STA-CO if further design assistance is required
E
D
F
Custom Arm Mounting Dimensions for Swing/Pull Clamps

B M
K Specifications
Shaft Dia. A B C D E F G H J K M
C 10 MM 0.394 0.256 0.63 0.63 0.709 0.394 0.236 0.217 M6 x 1.0

G
H 16 MM 0.630 0.335 0.748 0.748 0.709 1.26 0.472 0.236 0.217 0.30 M6 x 1.0
22 MM 0.866 0.413 1.00 1.00 0.866 0.709 0.236 0.217 M8 x 1.25
A J
031-S-475 • 031-L-475 031-S-1100 • 031-L-1100 031-S-2400 • 031-L-2400 Chart Legend

Max. Allowable Arm Weight = .35 Lbs! Max. Allowable Arm Weight = .73 Lbs! Max. Allowable Arm Weight = 1.6 Lbs! Maximum Length / Pressure
Pressure (psi) 5000 Pressure (psi) Pressure (psi)
5000 3575 2500

! 2000 1785 1570 1360 3850 2700 !2150 1775 1425 5000 3625 ! 2900 2465 1960 1450 Operating Range
600 1250 3000 Clamps must operate at or below maximum!

500 2500 arm length/pressure curve:
1000
400 2000 To approximate clamping force with any arm
300 750 1500 at less than maximum pressure:
200 1000
250
FORCE = P x A x [1-(P/M x .23)]
100 500
0 0 P = Hyd. system operating pressure (PSI)
0
.98 1.00 1.50 2.50 3.00 1.57 2.50 3.50 4.50 2.00 3.00 4.00 5.00 6.00 A = Clamp effective area (sq. in.)
Arm Length (In.) Arm Length (In.) 98 Arm Length (In.) 49
12 6 24 12
M = Max. rated pressure of chosen arm
Max Flow (in3/min.)
Max Flow (in3/min.) Max Flow (in3/min.) length (PSI)

StrongHold SELECT
TM
Hyd. Swing/Pull Clamp 4,000 lb. Arms

Custom built arms of any length must clamp to the swing/pull
U
C T P B clamp’s piston rod in a manner similar to the DE-STA-CO arms
or some derating of the clamp will be necessary.
V D The design feature “K,” in the chart and drawing at the bottom
G
of this page, is recommended for all applications of custom,
0M single arms. See the accompanying chart for design details. In
A applications where there is no bending stress being transferred
(031-S-4000) into the piston rod (like push/pull linkages and equalizing double
Q
H
arms), this design detail may be eliminated. In these
applications, the clamp’s full capacity (referred to as “straight
J
pull” capacity) is available.
I K
L
A
(031-L-4000)
Specifications
Weight
Cat no. A B C D G H I J K L M P Q T U V (lbs.)
031-S-4000 4.17 1.42 1/2-13 1.89 0.138 2.56 0.83 1.18 0.55 0.43 1.26 2.17 M12 0.58 2.75 0.98 1.80
031-L-4000 8.43 1.42 1/2-13 1.89 0.138 2.56 0.83 1.18 0.55 0.43 1.26 – M12 – 7.01 0.98 2.80
IMPORTANT: Any clamp using a modified or custom arm that is longer or heavier than DE-STA-CO’s standard arms
must be derated to prevent internal damage.
Do not exceed the maximum speed and pressure ratings for DE-STA-CO’s standard arms
For maximum hydraulic pressure and speed ratings, see the accompanying charts
Do not use meter-out circuitry for controlling double-acting clamp speeds
Contact DE-STA-CO if further design assistance is required
Custom Arm Mounting Dimensions for 4,000 lb. Swing/Pull Clamps
H Specifications
D
Cat no. A B C D E F G H
32MM 1.26 1.18 1.89 1.42 0.138 0.55 0.43 M12 x 1.75
B
F
031-S-4000 • 031-L-4000 Chart Legend
A G Max. Allowable Arm Weight = 2.8 Lbs Maximum Length / Pressure
Pressure (psi)
5000 3625 3100 2540 2175 1885 1740 Operating Range
4500
4000 Clamps must operate at or below maximum!

3500 arm length/pressure curve:
3000 To approximate clamping force with any arm
2500 at less than maximum pressure:
2000 FORCE = P x A x [1-(P/M x .23)]
1500
P = Hyd. system operating pressure (PSI)
1000
A = Clamp effective area (sq. in.)
500
M = Max. rated pressure of chosen arm
0
2.17 3.00 4.00 5.00 6.00 7.00 length (PSI)
152 Arm Length (In.) 91
Max Flow (in3/min.)

StrongHold SELECT Hyd. Swing/Pull Clamps Accessories
TM
Flange Mounting Bracket
DE-STA-CO’s StrongHold SELECT flange mounting brackets allow you to
secure your swing/pull clamps.
Swing clamps can also be screwed into a threaded hole and locked in
position with a jam nut. Two jam nuts may also be used to secure the clamps
in an unthreaded hole.
Flange Mount
Flange Mount
052-Series
B C
ØD Model no. A B C øD E
052-106-160 1 1/16-16 UN 2B 1.37 0.50 0.22 1.030

052-112-160 1 1/8-16 UN 2B 1.50 0.50 0.22 1.120
E 052-125-120 1 1/4-12 UN 2B 1.62 0.50 0.27 1.200
A 052-131-160 1 5/16-16 UN 2B 1.69 0.50 0.27 1.250
052-137-160 1 3/8-16 UN 2B 1.75 0.50 0.27 1.340
052-137-180 1 3/8-18 UN 2B 1.75 0.50 0.27 1.340
052-150-160 1 1/2-16 UN 2B 1.88 0.75 0.27 1.480
052-175-160 1 3/4-16 UN 2B 2.25 0.75 0.34 1.770
052-187-160 1 7/8-16 UN 2B 2.25 1.00 0.34 1.770
052-225-160 2 1/4-16 UN 2B 2.63 1.00 0.34 1.970
052-250-160 2 1/2-16 UN 2B 3.00 1.00 0.34 2.170
052-262-200 2 5/8-20 UN 2B 3.38 1.25 0.40 2.375
052-312-160 3 1/8-16 UN 2B 3.88 1.25 0.40 2.780
Jam Nut
Jam Nuts
051-Series
D C
Model no. A B C D E
A E
051-106-160 1 1/16-16 UN 2B 1.438 0.31 0.188 0.188
051-112-160 1 1/8-16 UN 2B 1.500 0.31 0.250 0.250
051-125-120 1 1/4-12 UN 2B 1.625 0.31 0.250 0.250
051-131-160 1 5/16-16 UN 2B 1.688 0.31 0.250 0.250
051-137-160 1 3/8-16 UN 2B 1.875 0.31 0.250 0.250
051-137-180 1 3/8-18 UN 2B 1.875 0.31 0.250 0.250
ØB
051-150-160 1 1/2-16 UN 2B 2.000 0.38 0.275 0.275
051-175-160 1 3/4-16 UN 2B 2.500 0.38 0.312 0.312
051-187-160 1 7/8-16 UN 2B 2.625 0.38 0.312 0.312
051-225-160 2 1/4-16 UN 2B 3.000 0.50 0.312 0.312
051-250-160 2 1/2-16 UN 2B 3.250 0.50 0.312 0.312
051-262-200 2 5/8-20 UN 2B 3.375 0.50 0.375 0.375
051-312-160 3 1/8-16 UN 2B 3.875 0.50 0.375 0.375

TM
Edge Clamp
Model 70626 Hydraulic Edge Clamps offer fast part load/unload in drilling, milling,
planing, grinding and other surfacing operations on either CNC or
Bridgeport-type machines.
These low profile clamps simultaneously apply horizontal and vertical
clamping force against the sides of a workpiece, effectively allowing
cutter access to an entire top surface. Maximum horizontal force
ranges up to 1,520 lbs. and vertical force is up to 1,220 lbs.
Features:
Highly-compact design
Positive spring return and replaceable grippers
Powered using shop air with an air/hydraulic booster
1.25 1.19
.27 (4) Holes .13 Clamping Range
& Part Location
1.50
1/4-.28
Tap-Removable
Standard Gripper Clamp Force at 5/16" Horizontal Stroke
Hydraulic
Pressure Horizontal Vertical
.50 Travel (Max.)
.19 Optimum Clamping Range 500 PSIG 190 lbs. 170 lbs.
1/8 NPT
1,000 PSIG 390 lbs. 350 lbs.
1.75 1,500 PSIG 620 lbs. 520 lbs.
1.38
1.00
2,000 PSIG 850 lbs. 700 lbs.
.88
5.06 2.00 2,500 PSIG 1,060 lbs. 870 lbs.
3,000 PSIG 1,300 lbs. 1,050 lbs.
3,500 PSIG 1,520 lbs. 1,220 lbs.
TOP VIEW
Specifications:
Maximum Operating Pressure 3500 PSIG
(Hydraulic)
Minimum Operating Pressure 500 PSIG
(Hydraulic)
Displacement .139 in.3
Piston Effective Area .442 in.2
Horizontal Stroke .31 in.
(includes .13" clamping range)
Associated Vertical Travel .22 in.
at Horizontal Stroke
SIDE VIEW

Thru-Hole Hydraulic Ram
TM
By inserting a rod through the hollow piston, these cylinders can be used to push or pull
depending on the orientation of the ram. They will actuate a rod of any length or shape
and are extremely effective in translating power to a remote location. Greater forces are
generated in these thru-hole rams because of their larger piston area.
Features:
Larger piston diameter for greater clamping forces
Symbol
Hardened steel piston and rod
Single-acting for simple plumbing
Optional threaded inserts
Optional mounting plate (permits mounting ram with a single cap screw)
Dimensions
RAM Oil Force at B
Model no. I.D.* Port Stoke Displacement 3,000 PSIG A B C
020-011-011DE 0.38 SAE #2 0.38 0.547 cu. in. 4,380 lbs. 2.13 1.88 2.25
020-012-021DE 0.50 SAE #4 0.50 1.35 cu. in. 8,100 lbs. 3.00 2.63 2.88 C
020-013-031DE 0.63 SAE #4 0.63 2.51 cu. in. 12,066 lbs. 3.25 3.00 3.63
* Clearance for rod or bolt of given dimension. Maximum input pressure 3,500 PSIG.
Accessories
All size thru-hole rams are supplied with a thru-hole insert threaded into the top. Optional threaded inserts, inch or metric, are also available.
Thru-Hole Insert
RAM no. (Supplied)
020-011-011DE 705384
020-012-021DE 705512
020-013-031DE 705634
To determine how much force is needed

to replace a manual clamp, use this
chart as a guide
Loads Trasmitted by Various Diameter Screws

Bolt Size Wrench Length F-lbs. (Average)
1/4 UNF 4.00 2,400 lbs.
1/4 UNF 4.00 1,920 lbs.
3/8 UNF 5.75 3,000 lbs.
3/8 UNF 5.75 2,920 lbs.
1/2 UNF 8.00 4,200 lbs.
A thru-hole ram easily converts
1/2 UNF 8.00 3,640 lbs.
a manual strap clamp into an
5/8 UNF 9.00 5,600 lbs. automatic hydraulic powered
5/8 UNF 9.00 5,600 lbs. clamp. Usually a longer bolt is
the only part needed to make
3/4 UNF 9.00 4,800 lbs.
this conversion.
3/4 UNF 11.00 4,200 lbs.
7/8 UNF 12.00 5,400 lbs.

TM
Thru-Hole Hydraulic Rams

Calculation of Forces Using Straps and Levers
Figure #1 Figure #2 Figure #3

When the distance AB is equal to The downward force “A” is equal to the When Force “B” from Model 020-011-011DE Hollow Bore
the distance BC the force upward upward force “C” times a ratio of the is divided between “A” & “C”, the forces at “A” & “C” are in
from Model 020-011-011DE Ram distance BC:AB. inverse ratio to the distance AB & BC respectively.
“C” is equal to the downward force Example: Force “A” = Force “B” x BC
“A” on the part. AB
AB = 2", BC = 4", Force “C” = 1,000 lbs.
Force “A” = Force “C” x BC Force “C” = Force “B” x AB
AB AC
“A” = 1,000 lbs. x 4 Example:

2
“A” = 2,000 lbs. AB = 2", BC = 4," Force “B” = 1,000 lbs.
Force “A” = 1,000 lbs. x 4 = 666.7 lbs.
6
2
Force “C” = 1,000 lbs. x = 333.3 lbs.
6
Power Sources
Thru-hole Rams can be powered by automatic pumps, hand pumps, boosters or existing machine hydraulics.
Used with automatic pump

Used with
booster
Used with
hand pump
Multiple Uses
Thru-hole Rams can be used to push or pull depending on the position of the ram.
Pull Pull Push Pull

Air/Hydraulic Power Boosters
TM
The DE-STA-CO Air/Hydraulic Power Booster converts normal shop-line
air pressure to high-pressure hydraulic power. The six models available
provide oil displacements ranging from 1 cu. in. to 12 cu. in. per stroke.
With the system filled, the volume of oil required to actuate a cylinder
or pressure point is only equal to the cubic content of the piston
displacement. The small booster, producing 1 cu. in. of usable oil per
stroke, can operate 50 of the tiny 1/2-20 pressure points a full .22 max.
stroke, and even more when strokes are kept to a minimum.
Features:
Built-in manifold
Complete automatic bleeding with each return stroke
Automatic relief of system overcharge
Automatic bleeding feature eliminates pre-filling
039-104-000DE
Large volume visible oil reservoir automatically replenishes
the system with reserve oil capacity
Y
Corrosion and wear-resistant materials
Wear rings on hydraulic piston tube
Unique self-centering air piston assures long life
Increases hydraulic pressure to 3,000 PSIG from 100 PSIG
X air-line pressure
All models supplied with SAE hydraulic ports
NPT hydraulic ports available on request
SAE!
HYDRAULIC!
PORTS
1/4 NPT!
AIR PORTS
Displacemen Nominal Dimensions

Press t Reservoir
Model no. Ratio Per Stroke Capacity Weight A B (Square) Ports
039-101-000DE 33.87:1 1 cu. in. 10.4 cu. in. 9 lbs. 10.88 4.50 SAE #4
039-104-000DE 32.41:1 4 cu. in. 42 cu. in. 23 lbs. 16.38 6.50 SAE #4
039-108-000DE 30.97:1 8 cu. in. 96 cu. in. 43 lbs., 8 oz. 18.00 8.50 SAE #4
039-109-000DE 45.38:1 5 cu. in. 96 cu. in. 43 lbs. 18.00 8.50 SAE #4
(100 PSIG max. input air pressure)
NOTE: Special High Temperature Seals available for applications where Viton Seals are required. Order as H/T option.

TM
Pump / Reservoir
Model 70150 Air-operated Model 70150 Hydraulic Pump/Reservoir provides fluid output
pressure to 4,500 PSIG from regular shop air line.
This unit is a completely self-contained air-operated hydraulic pressure
source for portable or permanent installation. It operates economically on
ordinary shop line air pressure from 40 to 125 PSIG and delivers high-
pressure oil, up to 4,500 PSIG, for operating single or multiple hydraulic
clamping devices.
This “off-the-shelf” hydraulic power package is perfect for use in confined
areas. The entire one-piece unit can be mounted on a bench, under a bench,
beneath a machine table, or anywhere convenient and requires only a single
air input connection. The unit can also be centrally located to serve several
work stations. The oil displacement and pressure available are charted using
various system pressures.
The “continuous pumping” feature ensures the desired pressure and
automatically compensates for any leakage in the system. Since no
electricity is required, the DE-STA-CO Hydraulics System Pump/ Reservoir is
particularly well suited for use in hazardous locations. It can be ordered with
special seals for use with non-combustible hydraulic fluids. Extra care has
been taken to achieve a quiet running unit. When measured at three feet, the
Pressure!
Regulator,!
1.675
noise level is only 85 dBA.
Filter
Air Inlet!
3/8 NPT!
Air Gauge
Features:
Swivel
Hydraulic! Manual!
Relief!
Lightweight & compact
Gauge Valve
Low initial cost & maintenance
Oil Outlet!
1.500 1/4 NPT Automatically holds desired pressure-compensates for leaks
Oil!
Return Line! Oil!
3/8 NPT Level!
Gauge 16.375
12.750
7.500 8.125
6.250
Mounting Mounting
10.000 8.000
10.750 5/16 Dia.! 10.000
Mounting Holes!
11.500 (4) Places
Performance Data
3
OUTPUT FLOW – IN / MIN.
INLET AIR VOLUME – CFM

Air Drive
OUTPUT PRESSURE – PSIG
Pressure
PSIG 0 500 1000 1500 2000 2250 2500 3000 3500 4000 4500
128 95 50
40
10 9 6
138 114 85 58
60
14 13 10
140 120 97 73 45 30
70
15 15 15 13 11 6
142 123 104 84 62 52 40
80
17 17 16 15 13 11 8
144 126 110 92 74 65 55 30
90
18 18 18 17 16 15 14 8
146 128 113 98 83 75 67 50 20
100
20 20 20 20 19 18 17 19 7
150 132 120 108 95 90 81 68 55 36 12
125 NOTE: See page 15.8 for
22 22 22 22 22 21 20 18 15 11 5
application information.

Electric/Hydraulic Pump
TM
This two-stage, Continuous Pressure (demand) Pump contains all the necessary controls and circuitry
for powering single-acting or double-acting continuous pressure workholding systems.
It has a pressure switch and pressure regulator, both infinitely adjustable throughout the operating
pressure range of 1,000 to 5,000 PSI. An internal safety relief valve prevents damage from exceeding
the maximum rated pressure. It is an economical gerotor/radial piston pump designed for remote
mounted valves only. The pump is shipped with 1.5 gallons of oil.
Features:
Drip proof induction motor
CSA approved
Filtered filler/breather cap
Liquid-filled gauge
Carrying handle
Thermal overload protection
2-gallon, high density polyethylene reservoir
33 cu. in./min. oil flow at max. pressure
100178DE
M 295 cu. in. usable oil
300
Oil Volume (Cu. In./Min.)
250
200
150
100 A
50
E
0 250 500 1000 2000 3000 4000 5000
Hydraulic Pressure (PSI) B
Performance
No. 100178DE
D G
C F
H
Specifications Dimensions (In Inches)
Noise Level @
Electric Supply Idle/Max. Press.
Cat. no. Motor Voltage (dBA) A B C D E F G H
1
⁄2 hp; 3,450 rpm;
100178DE 115/230 VAC 115 VAC
10/5 amps max.; 67/81 19.875 7.000 11.375 7.125 14.875 9.250 5.125 14.875
100178-230DE 60 Hz; single phase 230 VAC
NOTE: Mounting screws included (1⁄4-10 x .875 Lg.).

TM
Electric/Hydraulic Pump
These Electric/Hydraulic Pumps are two-stage, continuous pressure (demand) pumps that contain all
the necessary controls and circuitry for powering any single-acting or double-acting continuous
pressure workholding system. They have a pressure switch and an external pressure regulator, both
infinitely adjustable throughout the operating pressure range of 1,000 to 5,000 PSI. An internal safety
relief valve prevents damage from exceeding the maximum rated pressure.
They are gerotor/axial piston pumps with a totally enclosed fan cooled (TEFC) induction motor,
and shipped with two gallons of hydraulic oil.
Features:
NEMA 12 electrical enclosure and controls
CSA approved
Drip/chip cover
Liquid-filled gauge
Dual carrying handles
2.5-gallon metal reservoir
100186DE
M 590 cu. in. usable oil
SAE #4 outlet manifold ports
G H
300
Oil Volume (Cu. Inc./Min.)
250
200
150
100
50 A
0 250 500 1000 2000 3000 4000 5000
Performance
Pump No. 100186DE D
E F
B J C
Noise Level @ J
Electric Supply Idle/Max. Press. Thread
Cat. no. Motor Voltage (dBA) A B C D E F G H Size
100186DE* 1 hp; 1,725 rpm; 115 VAC

115/230 VAC;
70 21.375 9.500 11.500 6.500 8.000 10.000 14.125 9.500 ⁄2-20 UNF
1
16/8 amps max.;

Manual Pallet Coupling Pump
TM
This Manual Pallet Coupling Pump has been designed specifically for use with manual pallet valve
110050DE and 110051DE.
To clamp the pallet, simply start the pump using the remote hand switch. It runs until its pressure
setting is reached, then stops automatically and drops pressure, then the hose may be disconnected.
Controlled by a pressure switch and external pressure regulator, this pump is adjustable from 1,000
to 5,000 PSI. An internal relief valve is preset at 5,000 PSI. It has thermal overload protection and
integral “electrical shut-down” to prevent unintentional restarting after electrical service interruption or
thermal overload. The pump is shipped with one gallon of oil.
Features:
Drip proof induction motor
Motor-mounted electrical enclosure
2-gallon plastic reservoir
Liquid-filled gauge
Filtered, pressure/vacuum relief fill cap
External pressure switch and regulator
100179DE Carrying handle
M SAE #6 Outlet Manifold Ports
295 cu. in. usable oil
Includes No. 100908DE female coupler (1/4" NPT thread size)
CSA approved
Max. flow 33 cu. in./min. at max. pressure.
300
250
200
e (Cu. In./Min.)
150
100 A
50 E
0 250 500 1000 2000 3000 4000 5000

Hydraulic Pressure (PSI) B
Performance
Pump No. 100179DE
D G
C F
H
Noise Level @
Electric Supply Idle/Max. Press.
Cat. no. Motor Voltage (dBA) A B C D E F G H
⁄2 hp; 3,450 rpm
1
100179DE 115 VAC; 10 amps max.; 115 VAC

60 Hz; single phase
67/81 19.875 7.000 11.375 7.125 14.875 9.250 5.125 14.875
1
⁄2 hp; 3,450 rpm
100179-230DE 230 VAC; 5 amps max.; 230 VAC
60 Hz; single phase
NOTE: Mounting screws included (1/4-10 x .875 Lg.).

TM

DE-STA-CO’s one-horsepower, totally enclosed-fan cooled Induction Motor Pump, is outfitted to
operate DE-STA-CO’s single-acting manual pallet valves.
To pressurize the clamping components on the pallet, simply start the pump using the remote hand
switch. It runs until its pressure setting is reached, then stops automatically and drops pressure.
The coupler and hose may now be easily disconnected and later reconnected.
The output of this gerotor/axial piston pump is controlled by a pressure switch and externally adjustable
pressure regulator, both adjustable from 1,000 to 5,000 PSI. It is shipped with a coupler and 2 gallons
of hydraulic oil. Order a hose to fit your application separately.
Features:
NEMA 12 electrical enclosure and controls
CSA approved
Drip/chip cover
Liquid filled gauge
Dual carrying handles
2.5-gallon metal reservoir
M 100888DE
TEFC motor
Filtered filler/breather cap
Includes 100908DE female hydraulic coupler (1/4" NPT thread size)
G H
300
STOP
250
START
200
150
100
50 A
0 250 500 1000 2000 3000 4000 5000

Performance
Pump No. 100888DE D
E F
B J C
Noise Level @ J
Electric Supply Idle/Max. Press. Thread
Cat. no. Motor Voltage (dBA) A B C D E F G H Size
100888DE* 1 hp; 1,725 rpm; 115 VAC

115/230 VAC;
70 21.375 9.500 11.500 6.500 8.000 10.000 14.125 9.500 1
⁄2-20 UNF
16/8 amps max.;

TM
Designed specifically for use with manual pallet valves, this Single-Stage Pump includes a 5 ft.
hose and special female coupler (100908DE) to mate with our manual pallet valves.
Operation is simple: connect the coupler and release the pallet valve. Change the workpiece, then
press the foot pedal to start the pump and clamp the piece. Rocking the pedal forward releases
pressure in the coupler while the pallet valve maintains pressure at the pallet. At this point, the
coupler and hose may be disconnected.
Features:
Filtered filler/breather cap with dipstick
105 cu. in. metal reservoir
SAE #6 outlet
1⁄4” NPTF air inlet port
Shipped with hydraulic oil
Foot treadle control allows “hands free” operation
100279DE Operating Pressure Range (nominal):
• 4,475 PSI max. @ 125 PSI air, max.
• 1,150 PSI min. @ 40 PSI air, min.
200
L L E R
F I
Flow (Cu.In./Min.)
150 E A T H E
R
RELEASE
PUMP
100 E
50
0
1000 2000 3000 4000 5000
Performance
No. 100279DE
125 psi Air Pressure
40 psi Air Pressure
B
C
F G
D
Model no. A B C D E F G
100279DE 7.750 5.875 4.250 10.000 5.000 9.000 4.000
NOTE: This pump is not for use in normal “constant pressure”

applications. Requires filtered, regulated, lubricated air supply.
Air requirements: 20 CFM (max.) at low hydraulic pressure decreasing
to 0 CFM when pump stalls.

TM
Air/Hydraulic Pump
DE-STA-CO’s Single-Stage Pumps are continuous pressure, reciprocating, stall-type
pumps – air pressure is simply converted to hydraulic pressure. Operated by any
compressed air source, these pumps save energy by stalling when pressure is developed,
100920DE and require no energy use to maintain system pressure. Consult factory for pump-
mounted valves.
Features:
105 cu. in., high-density polyethylene reservoir
Filtered fill cap with dipstick
Liquid filled gauge
SAE #4
1⁄4” NPTF air inlet port
98 cu. in usable oil
Shipped filled with oil
Operating Pressure Range (nominal):
100920DE – 5,000 PSI @ 110 PSI air, max. 1,500 PSI @ 40 PSI air, min.
.375 dia. piston size
100190DE – 4,475 PSI @ 125 PSI air, max. 1,150 PSI @ 40 PSI air, min.
.437 dia. piston size
200
150
100
50
0
1000 2000 3000 4000 5000
H
Performance
No. 100190DE
40 psi Air Pressure
125 psi Air Pressure
150
100
B
50
0
1000 2000 3000 4000 5000 G F F
E
Hydraulic Pressure (PSI) C D
Performance Specifications Dimensions (In Inches)

No. 100920 DE
40 psi Air Pressure
110 psi Air Pressure Operating Pressure Range A B C D E F G H
Ports
Piston @ 125 PSI Air @ 40 PSI Air
Cat. no. Dia. Max. Min.
100920DE 0.375 * 1,500
9.500 5.500 13.062 6.125 9.000 2.000 1.250 1⁄4 NPTF
100190DE 0.437 4,475 1,150
NOTE: Mounting screws included (9-15 x 1.000 Lg.).

AIR REQUIREMENTS: 20 CFM (max.) at low hydraulic pressure decreasing to 0 CFM when pump stalls.
* Air pressure higher than 110 PSI will cause the pump to exceed its 5,000 PSI maximum rating. The internal relief valve
will open to protect the pump and the circuit, but the pump will continue to reciprocate rather than stall. This will cause
unnecessary wear, noise, heat and air usage.

Screw Pump
TM
This versatile Screw Pump can produce up to 3,500 PSIG oil pressure. Reservoir capacity is
6.18 cu. in. Two vertical holes in the base and horizontal holes in the top and base, permit
mounting in any convenient attitude. The sliding handle allows maximum leverage.
2.75
0.31
1.00
2.00
3.38
3.63 3.50
0.25
037-100-122 0.50
.34 DIA. (6) HOLES
6.88
SAE #4 PORT
0.188
037-100-122 Manual Pump

0.63 0.75
Exerting Force on Handle vs Pressure
200
1.25
190
180
170
160
150
Exerting Force on Handle (Lbs.)
140
130
120 Distance Force Applied
Resulting (Measured from Center Axis
110 Hydraulic of Pump A)
Pressure
100 (PSI) 6.50 in. 4.13 in. 1.75 in,
90 500 10 14 43
1,000 17 25 60
80 1,500 24 35 77
70 2,000 30 45 94
2,500 36 54 111
60
3,000 42 65 128
50 3,500 49 75 145
40 4,000 55 85 162
4,500 61 95 179
30 5,000 67 105 196
20
Force Required (lbs.)
10
500
500 1000 1500 2000 2500 3000 3500 4000 4500 5000
Pressure (PSI)
6.50 In. 4.13 In. 1.75 In.
Handle Length (User Adjustable)

TM
Check Valves
The SAE-4 (part number 500173DE) “T” port Check Valve is recommended on single-acting
circuits where there is more than one directional valve per power source. These check
valves are ideal for use in circuits where return line pressure fluctuations may affect
released clamps.
Use this anytime a return line pressure spike could cause unclamped actuators to move
and affect operator safety. They are designed specifically for DE-STA-CO’s No. 100969DE
Directional Control Valves.
The SAE-4 (500174DE) “P” port check valve is required on all single-acting or double-acting
circuits where there is more than one directional valve per power source. These check
valves prevent power source pressure fluctuations from affecting the pressure in clamped
circuits. Without this check valve, shifting the directional control valve in one circuit will
cause a temporary loss of clamping pressure in the other circuit.
500174DE
500173DE
500173DE 500174DE
E B E B
D Free D Free
Flow Flow
C C
A
A
“P” Port Check Valve

(500172DE, 500174DE)
“T” Port Check Valve

(500173DE)
Cracking Use With A B C D E

Check Pressure Directional Thread Thread Hex
Cat. no. Valve Location (PSI) Valve No. Size Size
500173DE Outlet 1.431 1.071 ⁄16-20UNF
7
⁄16-20UNF
7
2 100969 0.625
500174DE Inlet 1.065 0.705 SAE-4 SAE-4

Directional Control Valves
TM
Models 70912, 70913
The DE-STA-CO DCV Series Valves are constructed of heat-treated alloy
steel and aluminum components. They are compact, lightweight (12
oz.) and shift easily even under maximum pressure. The valves have
extremely low leakage, less than one (1) drop per two (2) minutes at
rated pressure.
Features:
Available in 6,000 PSI pressure rating
CV factor for -4 SAE is .26
Temperature range of -65° F to +160° F
Manifold mounting conforms to 200 DO1 mounting pattern (for
panel mounting, the hole should be 113⁄32" dia. with a maximum
thickness of 5⁄16"
High strength mounting bolts are included with the manifold mount
version valve
A B
)(
P T
2.995
1.220
.610
.820
.410 .205
2.567 B
2.360 Manifold P
1.590 T 2.000
1.205 Mount .795
Model A
70913
.690 .345 .36
.640 Ø.203 Thru!

1.280 4 Places
2.000
2.995 2.995
3.085
Inline 3.085
2.880 Mounting 2.880
1.725 Model 1.725
70912
SAE #4 Port! SAE #4 Port!

(4) Places (4) Places

TM
Value Added Services

3D CAD Library and Configurator
Grab It!
Hold It!
Download It!
DE-STA-CO on-line 3D CAD Library and Configurator provides you with a
valuable “hands-on” experience. Configure each DE-STA-CO StrongHold
product with the options and accessories you require for your workholding
application. Programmable positioning in 2D or 3D formats. Compatible
with virtually any CAD language in many output formats.
www.destaco.com
Customer Service and Support Product Warranty

DE-STA-CO is recognized for our customer service centers,
All DE-STA-CO products are thoroughly inspected
tailored to responding quickly to your product and service and tested. We fully guarantee all materials and
questions and needs. workmanship to be free of defects. Any product
that is found to be defective in design, material or
DE-STA-CO StrongHold can be reached at: workmanship in the course of its normal use will
be promptly replaced.
Phone: (248) 594-5600 (888) DESTACO
This Warranty does not apply to any product
Fax: (248) 644-3929 (800) 682-9686 where the failure is a result of misapplication or
Web: www.destaco.com abuse, nor is there any Warranty expressed or
implied as to the merchantability or fitness for a
particular purpose of the product and any
warranty is limited to the above express warranty.
The Warranty is null and void if the product is

Field Representatives repaired, modified or altered in any way.
DE-STA-CO is not liable for labor, special, direct,

incidental or consequential damages and under
DE-STA-CO StrongHold has a team of manufacturing- no circumstances any charges in excess of the
experienced field representatives to provide you with invoice amount of the product proven to be
prompt, personal and professional assistance for your defective.
application solutions.
To find your Field Representative:
Visit www.destaco.com or
call 1-888-337-8226.

Holding Capacity Charts / Ordering Number Index
Holding capacity charts / Ordering no. index

Holding Capacity Charts Vertical Clamps
2002, 2007, 2010 Series
Dim. (CL to CL, in Inches) Max. Mechanical Max. Holding Capacity
Base Pivot to Advantage (M.A.) at [lbs.] at Force
Applied
Spindle Spindle Spindle Spindle Spindle Spindle to Handle
Model no. Loc. A Loc. C Loc. A Loc. C Loc. A Loc. C at D
2002-U 1.45 2.65 11.1:1 5.1:1 600 295 0.50
2007-U 1.95 3.92 10:1 5.3:1 1000 470 1.25
2010-U 2.44 4.88 13:1 6:1 1400 720 1.00
201 Series
Applied
Spindle Spindle Spindle Spindle Spindle Spindle Spindle Spindle Spindle to Handle
Model no. Loc. A Loc. B Loc. C Loc. A Loc. B Loc. C Loc. A Loc. B Loc. C at D
201 1.063 – 1.75 9:1 – 6:1 100 – 55 0.500

201-SS 1.063 – 1.75 9:1 – 6:1 125 – 60 0.500
201-TSS 1.063 – 1.75 9:1 – 4:1 125 – 60 0.500
202 Series
Applied
202 – – 1.875 – – 8:1 – – 200 0.375

202-SS – – 1.875 – – 8:1 – – 250 0.375
202-T – – 1.875 – – 6:1 – – 200 0.1875
202-U 1.25 1.75 2.25 10:1 7:1 5:1 200 140 110 0.375
202-UL 1.25 1.75 2.88 10:1 7:1 4:1 200 170 125 0.375
202-USS 1.25 1.75 2.25 10:1 7:1 5:1 250 170 130 0.375
202-TU 1.25 1.75 2.25 11:1 8:1 7:1 200 140 110 0.1875
207 Series
Applied
207-SO 2.875 – 3.75 8:1 – 6:1 500 – 350 0.375

207-UO 2.0 2.875 3.75 10:1 8:1 6:1 375 275 225 0.375
207-USS 2.0 2.875 3.75 10:1 8:1 6:1 450 310 240 0.375
207-TS 2.875 – 3.75 4:1 – 3:1 500 – 350 0.125
207-TU 2.0 2.875 3.75 6:1 5:1 3:1 375 275 225 0.125
207-TL 2.875 – 5.0 4:1 – 3:1 500 – 260 0.125
207-TUL 2.0 – 5.0 5:1 – 3:1 375 – 150 0.125
207-LO 2.875 – 5.0 8:1 – 5:1 500 – 260 0.375
207-ULO 2.0 – 5.0 7:1 – 4:1 375 – 150 0.375
207 Series World Clamp

Base Pivot to Advantage (M.A.) at [lbs.] at
Spindle Spindle Spindle Spindle Spindle Spindle Spindle Spindle Spindle

Model no. Loc. A Loc. B Loc. C Loc. A Loc. B Loc. C Loc. A Loc. B Loc. C
207-S 2.875 – 3.75 8:1 – 6:1 500 – 350

207-U 2.0 2.875 3.75 6:1 8:1 6:1 375 275 225
207-L 2.875 – 5.0 5:1 – 5:1 500 – 260
207-UL 2.0 – 5.0 4:1 – 4:1 375 – 150
210 Series
Applied
210-S 3.625 – 5.25 11:1 – 9:1 750 – 500 0.625

210-TS 3.625 - 5.25 5:1 – 3:1 750 – 500 0.125
210-U 2.375 3.625 4.875 14:1 9:1 7:1 600 390 290 0.625
210-TU 2.375 3.625 4.875 11:1 7:1 5:1 600 390 290 0.125
210-USS 2.375 3.625 4.875 14:1 9:1 7:1 750 490 360 0.625

Holding Capacity Charts
Vertical Clamps
219, 229 Models
Base Pivot to Advantage (M.A.) at [lbs.] at
Spindle Spindle Spindle Spindle Spindle Spindle Spindle Spindle Spindle
Model no. Loc. A Loc. B Loc. C Loc. A Loc. B Loc. C Loc. A Loc. B Loc. C
219 2.75 4.0 5.0 8.8:1 5.8:1 4.7:1 350 240 190
229 3.0 4.523 6.125 7:1 5:1 3:1 1000 675 500
518 Model
Applied
518 2.5 3.25 4.0 14:1 13:1 11:1 500 380 310 0.750
247, 267 Series

Applied
247-S 4.563 6.125 7.0 10:1 6:1 5:1 1000 740 650 0.831
247-U 3.0 4.523 6.125 12:1 10:1 6:1 1000 650 480 0.831
267-U 4.0 6.0 8.0 18:1 12:1 8:1 1200 800 600 0.875
267-S 6.0 8.0 8.75 12:1 8:1 8:1 1200 900 820 0.875
548, 578, 588 Series

Applied
Spindle Spindle Spindle Spindle Spindle Spindle to Handle
Model no. Loc. A Loc. B Loc. A Loc. B Loc. A Loc. B at D
548 3.5 6.0 4.5:1 3.4:1 2500 1500 0.500

578 4.5 7.0 7.6:1 4.2:1 4000 2500 0.500
588 5.0 8.0 5.7:1 4.5:1 6000 3750 0.500
317 Series
Applied
317-U 2.0 2.875 3.75 17:1 11:1 8:1 375 260 200 0.500
317-S 2.5 3.75 5.0 13:1 8:1 5:1 375 250 190 0.500
527 Series
Applied
527 3.5 4.75 6.0 23:1 16:1 12:1 1000 730 580 0.500
528 Series
Applied
528 3.5 4.75 6.0 23:1 16:1 12:1 1000 730 580 –

Holding Capacity Charts Horizontal Clamps
205 Series
Applied
205-S – – 0.875 – – 4:1 – – 60 0.312

205-SSS – – 0.875 – – 4:1 – – 75 0.312
205-SR/SL – – 0.875 – – 4:1 – – 60 0.312
205-U 0.438 – 0.813 9:1 – 5:1 60 – 50 0.312
205-USS 0.438 – 0.813 9:1 – 5:1 75 – 65 0.312
205-UR/UL 0.438 – 0.813 9:1 – 5:1 60 – 50 0.312
206-SS Series
Applied
206-SS 0.563 – 1.063 5:1 – 3:1 100 – 50 0.375

206-HSS 0.563 – 1.063 5:1 – 3:1 100 – 50 0.375
215 Series
Applied
215-S 1.625 – 2.875 6:1 – 4:1 200 – 110 0.312

215-U 1.0 1.625 2.25 9:1 6:1 4:1 200 120 80 0.312
215-USS 1.0 1.625 2.25 9:1 6:1 4:1 250 150 110 0.312
225 Series
Applied
225-U 1.25 1.875 2.5 12:1 7:1 5:1 500 330 250 0.438
225-USS 1.25 1.875 2.5 12:1 7:1 5:1 600 400 300 0.438
235 Series
Applied
235-U 1.75 2.938 4.125 9:1 7:1 5:1 750 450 300 0.500
235-USS 1.75 2.938 4.125 9:1 7:1 5:1 850 500 360 0.500
213, 217, 227, 237, 245 Series

Applied
213-U 0.75 1.188 1.625 7:1 5:1 3:1 150 95 70 0.250

213-USS 0.75 1.188 1.625 7:1 5:1 3:1 150 95 70 0.250
217-U 1.125 1.875 2.625 7:1 4:1 3:1 200 120 80 0.500
217-USS 1.125 1.875 2.625 7:1 4:1 3:1 250 150 100 0.500
227-U 1.25 2.0 2.75 8:1 5:1 3:1 500 310 225 0.500
227-USS 1.25 2.0 2.75 8:1 5:1 3:1 600 375 270 0.500
237-U 1.75 3.125 4.5 6:1 3:1 2:1 750 420 290 0.500
237-USS 1.75 3.125 4.5 6:1 3:1 2:1 850 475 330 0.500
245-U 2.0 3.5 5.0 11:1 6:1 5:1 1000 570 400 0.500
0.500

Holding Capacity Charts
Horizontal Clamps
305, 307, 309 Series
Applied
305-U 1.375 – 1.875 3:1 – 2:1 150 – 110 0.125

305-USS 1.375 – 1.875 3:1 – 2:1 200 – 150 0.125
307-U 1.875 2.188 2.5 3:1 2:5 2:1 350 300 260 0.188
307-USS 1.875 2.188 2.5 3:1 2:5 2:1 350 300 260 0.188
309-U 2.5 3.0 3.5 4:1 3:1 2:1 750 625 530 0.3125
309-USS 2.5 3.0 3.5 4:1 3:1 2:1 750 625 530 0.3125
601, 6001 Series 602, 604, 624 Series

Max. Mechanical Max. Mechanical
Advantage (M.A.) Force Advantage (M.A.) Force
Applied Applied
to Handle to Handle
Model no. Pushing Pulling at D Model no. Pushing Pulling at D
601 14:1 25:1 0.250 602 31:1 28:1 0.500

601-SS 14:1 25:1 0.250 602-SS 31:1 28:1 0.500
6001-M 14:1 25:1 0.250 604 45:1 26:1 0.500
604-SS 45:1 26:1 0.500
624 49:1 21:1 0.250
624-SS 49:1 21:1 0.250
6004 Series 603 Series

Applied Applied
to Handle to Handle
6004 14:4:1 – – 603 23:1 34:1 0.500

Applied Applied
to Handle to Handle
605 45:1 40:1 0.500 606 33:1 – 0.500

Applied Applied
to Handle to Handle
607 37:1 64:1 0.250 608 44:1 50:1 0.250

Applied Applied
to Handle to Handle
609 36:1 47:1 0.500 610 51:1 70:1 0.250

Holding Capacity Charts Straight-Line Action Clamps

D

Applied Applied
to Handle to Handle
617 31:5:1 – 0.75 620 44:1 – 0.500

Applied Applied
to Handle to Handle
630 36:1 23:1 0.250 640 35:1 – 1.000
650 Series
Max. Mechanical
Advantage (M.A.) Force
Applied
to Handle
Model no. Pushing Pulling at D
650 25:1 – 1.000
Latch Clamps
301, 311 Series 330 Series

Max. Max.
Mechanical Force Applied Mechanical Force Applied
Advantage to Handle Advantage to Handle
Model no. (M.A.) at D Model no. (M.A.) at D
301 29:1 0.500 330 17:1 0.250

301-SS 29:1 0.500 330-SS 17:1 0.250
311 31:1 0.500
323, 331, 341 Series 351, 371, 381 Series

Max. Max.
323 27:1 0.250 351 21:1 0.375

323-SS 27:1 0.250 351-SS 21:1 0.375
331 32:1 0.250 371 36:1 0.750
331-SS 32:1 0.250 371-SS 36:1 0.750
341 29:1 0.250 381 37:1 0.750
341-SS 29:1 0.250 381-SS 37:1 0.750
324, 334, 344, 374 Series 375, 375-B, 385, 385-L Series
Max. Max.
324 31:1 0.250 375 44:1 0.750

324-SS 31:1 0.250
334 31:1 0.250
334-SS 31:1 0.250
344 45:1 0.250
344-SS 45:1 0.250
374 36:1 0.750

Ordering Number Index
Ordering no. index
Model no. Page Model no. Page Model no. Page
7-101 2.36 207-TS 2.16 225-USS 8.7

7-58 2.36 207-TU 2.17 227-U 3.14
7-59 2.36 207-TUL 2.17 227-UB 3.15
7-60 2.36 207-U 2.18 227-USS 8.9
7-61 2.36 207-UB 2.20 229 2.24
201-TU 2.17 207-UBR 2.23 235-U 3.11
201-U 2.18 207-UF 2.38 235-UB 3.12
201-UB 2.20 207-UL 2.18 235-UR 3.13
201-USS 8.4 207-ULB 2.20 235-USS 8.7
202 2.12 207-UO 2.18 237-U 3.14
202-B 2.13 207-UR 2.22 237-UB 3.15
202-SS 8.5 207-USS 8.4 237-USS 8.9
202-T 2.16 210-S 2.12 245-U 3.14
202-TB 2.16 210-SB 2.13 247-S 2.12
202-TU 2.17 210-SBR 2.15 247-SB 2.13
202-U 2.18 210-SR 2.14 247-U 2.18
202-UB 2.20 210-TS 2.16 247-UB 2.20
202-UBSS 8.6 210-TU 2.17 267-S 2.12
202-UL 2.18 210-U 2.18 267-U 2.18
202-USS 8.4 210-UB 2.20 301 6.4
205-S 3.9 210-UBR 2.23 301-SS 8.20
205-SB 3.10 210-UR 2.22 305-U 3.16
205-SL 3.9 210-USS 8.4 305-UR 3.17
205-SR 3.9 213-U 3.14 305-USS 8.10
205-SSS 8.7 213-UB 3.15 307-U 3.16
205-U 3.11 213-USS 8.9 307-UR 3.17
205-UB 3.12 215-S 3.9 307-USS 8.10
205-UL 3.11 215-SB 3.10 309-U 3.16
205-UR 3.11 215-U 3.11 309-UR 3.17
205-USS 8.7 215-UB 3.12 309-USS 8.10
206-HSS 8.8 215-USS 8.7 311 6.4
206-SS 8.8 217-U 3.14 317-S 2.39
207-L 2.12 217-UB 3.15 317-U 2.40
207-LB 2.13 217-USS 8.9 323 6.6
207-LBR 2.15 219 2.24 323-SS 8.15
207-LR 2.14 225-U 3.11 324 6.16
207-S 2.12 225-UB 3.12 324-SS 8.17
207-SB 2.13 225-UBSS 8.10 325 7.4
207-SF 2.37 225-UR 3.13 325-SS 8.19

Ordering Number Index Ordering no. index
326 6.15 385-R 6.14 516-B 2.25

330 6.20 385-V2A 8.16 518 2.26
330-SS 8.18 424 7.6 527 2.41
331 6.6 424-2 7.6 527-F 2.42
331-RSS 8.16 425 7.7 528 2.27
331-R 6.8 431 7.7 528-F 2.27
331-SS 8.15 431-2 7.7 533-L 2.30
334 6.16 435 7.8 533-LB 2.31
334-SS 8.17 441 7.6 535-L 2.30
336 6.15 441-2 7.6 535-LB 2.31
341 6.6 443 7.8 536-LB 2.31
341-RSS 8.16 445 7.9 548 2.28
341-R 6.8 462 7.9 557 2.42
341-SS 8.15 462-2 7.10 558 2.29
344 6.16 463 7.10 568 2.29
344-SS 8.17 468 7.11 578 2.28
345 7.5 470 7.11 588 2.28
346 6.15 474 7.12 601 4.5
351 6.20 480 7.12 601-M 4.5
351-B 6.22 482 7.9 601-O 4.5
351-R 6.23 484 7.13 601-OSS 8.11
351-BSS 8.18 486 7.13 601-SS 8.11
351-SS 8.18 501-B 2.33 602 4.6
353-35 6.19 501-LB 2.34 602-MM 4.6
353-65 6.19 503-MB 2.33 602-SS 8.13
359-35 8.22 503-MBLSC 2.33 603 4.11
359-65 8.22 503-MLB 2.34 603-M 4.11
371 6.20 503-MLBLSC 2.34 603-MR 4.12
371-R 6.23 505-MB 2.33 603-MSS 8.13
371-SS 8.18 505-MBLSC 2.33 603-R 4.12
374 6.18 505-MLB 2.34 603-SS 8.13
375 6.9 505-MLBLSC 2.34 604 4.6
375-B 6.10 506-MB 2.33 604-MM 4.6
375-R 6.11 506-MBLSC 2.33 604-MMSS 8.13
375-BR 6.12 506-MLB 2.34 604-SS 8.13
381 6.20 506-MLBLSC 2.34 605 4.11
381-SS 8.18 515 3.18 605-M 4.11
385 6.13 515-B 3.18 606 4.13
385-L 6.13 516 2.25 606-M 4.13

Ordering no. index
607 4.14 807-S 11.9 894-L 14.8

607-M 4.14 807-U 11.8 894-R 14.8
607-SQ 4.14 810-S 11.9 905 9.4
607-SQM 4.14 810-U 11.8 920 9.4
608 4.11 812-U 11.8 991-MRM 14.10
609 4.15 816 11.19 1000 14.6
609-B 4.15 816-M 11.19 1001 14.6
610 4.16 817-S 11.15 1091-MRM 14.10
610-M 4.16 817-U 11.16 1200 11.24
614-M 4.17 827-S 11.15 1200-E 11.24
615 4.16 827-U 11.16 2002-S 2.7
617 4.18 830 11.21 2002-SB 2.7
620 4.18 830-M 11.21 2002-SBR 2.8
620-M 4.18 840 14.4 2002-SR 2.8
624 4.6 841 14.4 2002-U 2.9
624-MM 4.6 846 11.11 2002-UB 2.9
624-SS 8.13 847-S 11.9 2002-UBR 2.10
630 4.19 847-U 11.8 2002-UR 2.11
630-M 4.19 849 11.13 2007-S 2.7
630-R 4.19 850 11.22 2007-SB 2.7
630-MR 4.19 850-M 11.22 2007-SBR 2.8
640 4.19 858 11.14 2007-SR 2.8
640-M 4.19 860 14.6 2007-U 2.9
650 4.20 861 14.6 2007-UB 2.9
650-M 4.20 863-D 14.8 2007-UBR 2.10
670-1MB 4.22 863-L 14.8 2007-UR 2.11
670-1MBPLS 4.22 863-R 14.8 2010-S 2.7
675-1MB 4.22 864-D 14.8 2010-SB 2.7
675-1MBPLS 4.22 864-L 14.8 2010-SBR 2.8
690-1MB 4.22 864-R 14.8 2010-SR 2.8
690-1MBPLS 4.22 868 11.17 2010-U 2.9
695-1MB 4.22 870-2 11.26 2010-UB 2.9
695-1MBPLS 4.22 871-2 11.26 2010-UBR 2.10
800 11.24 890 14.6 2010-UR 2.11
800-E 11.24 891 14.6 2013-U 3.5
801 11.25 893-D 14.8 2013-UB 3.6
802-U 11.5 893-L 14.8 2013-UBR 3.8
803 11.18 893-R 14.8 2013-UR 3.7
803-M 11.18 894-D 14.8 2017-U 3.5

2017-UB 3.6 8315-LA 12.14 110122 9.6

2017-UBR 3.8 8316 12.14 201208 9.2
2017-UR 3.7 8316-LA 12.14 201208-M 9.2
2027-U 3.5 8415 12.14 201943 9.3
2027-UB 3.6 8415-LA 12.14 202203 9.4
2027-UBR 3.8 8416 12.14 202208 9.2
2027-UR 3.7 8416-LA 12.14 202208-M 9.2
2037-U 3.5 9530 12.22 202943 9.3
2037-UB 3.6 9540 12.22 205203 9.4
2037-UBR 3.8 70150 15.34 205203-M 9.4
2037-UR 3.7 70250 15.18 205208-M 9.2
3011 6.5 70260 15.18 205943 9.3
3011-SS 8.21 70626 15.30 207105 9.6
6001-M 4.4 70912 15.43 207203 9.4
6001-MSS 8.12 70913 15.43 207203-M 9.4
6004 4.7 91090 2.43 207206 9.3
6004-MM 4.7 91140 2.43 207209 9.3
6015-M 4.9 95030 4.21 207943 9.3
6015-MR 4.10 95040 4.21 207943-M 9.3
6015-MSS 8.14 95050 4.21 210114 9.6
8007-2F 11.10 95060 4.21 210203 9.4
8007-2FA 11.10 100178DE 15.35 210203-M 9.4
8015 12.14 100178-230DE 15.35 210206 9.3
8015-LA 12.14 100179DE 15.37 210208 9.2
8016 12.14 100179-230DE 15.37 210209 9.3
8016-LA 12.14 100186DE 15.36 213208 9.2
8021 11.11 100186-230DE 15.36 213208-M 9.2
8031 11.20 100190DE 15.40 213943 9.3
8071 11.11 100279DE 15.39 215105 9.6
8101 11.11 100888DE 15.38 215119 9.5
8115 12.14 100888-230DE 15.38 215208 9.2
8115-LA 12.14 100920DE 15.40 215208-M 9.2
8116 12.14 102111 9.6 215219 9.5
8116-LA 12.14 102208 9.2 215319 9.5
8215 12.14 102911 9.6 215905 9.6
8215-LA 12.14 105106 9.6 220203 9.4
8216 12.14 105203 9.4 220208 9.2
8216-LA 12.14 105208 9.2 225119 9.5
8315 12.14 105906 9.6 225208 9.2

Ordering no. index
225208-M 9.2 424208-M 9.2 519208 9.2

225219 9.5 431208 9.2 527203 9.4
225319 9.5 431208-M 9.2 527208 9.2
235106 9.6 441203 9.4 602106-M 4.8
235110 9.5 441203-AL 9.4 604106 4.8
235119 9.5 441203-M 9.4 604106-M 4.8
235208 9.2 461203 9.4 624108 4.8
235208-M 9.2 461203-M 9.4 624106-M 4.8
235219 9.5 468206 9.3 801010 11.25
235319 9.5 468206-AL 9.3 801528 12.15
235906 9.6 468206-M 9.3 801529 12.15
237943 9.3 485203-AL 9.4 801530 12.15
237943-M 9.3 486203-AL 9.4 801531 12.15
240203 9.4 491203 9.4 801532 12.15
240203-M 9.4 491203-AL 9.4 801553 12.15
240208 9.2 491203-M 9.4 810151 13.4
240208-M 9.2 500173DE 15.42 810152 13.4
245943 9.3 500174DE 15.42 810153 13.4
247109 9.6 501501 2.35 810154 13.4
247110 9.6 501503 2.35 810155 13.4
247208 9.2 503502 2.35 810156 13.4
247208-M 9.2 503503 2.35 810157 13.4
247909 9.6 503503-L 2.35 810158 13.4
250121 9.6 503501 2.35 810159 13.2
250203 9.4 505503 2.35 810163 13.2
250206 9.3 505503-L 2.35 810164 13.2
267102 9.6 505501 2.35 810165 13.2
267203-M 9.4 505502 2.35 810166 13.2
267208 9.2 506501 2.35 810167 13.2
305203 9.4 506502 2.35 810168 13.2
305208 9.2 506503 2.35 810169 13.2
305208-M 9.2 506503-L 2.35 810170 13.2
307208-M 9.2 507107 9.6 810171 13.2
325203 9.4 507206 9.3 810172 13.2
353004 6.19 507208 9.2 810173 13.2
353904 8.22 507208-M 9.2 810174 13.2
353908 8.22 507209 9.3 810175 13.2
424107 9.5 507907 9.6 821512 12.15
424208 9.2 509208 9.2 821513 12.15

821553 12.15 82L25-14300H0B 14.16 8MA-084-1 12.18

821554 12.15 82L32-1___H_ 14.31 8MA-086-1 12.18
821555 12.15 82L32-103__00 14.22 8MA-087-1 12.18
821556 12.15 82L32-111__00 14.26 8MA-088-1 12.18
841512 12.15 82L32-112__00 14.26 8MA-089-1 12.18
841550 12.15 82L32-123__00 14.26 8MA-092-1 12.18
954050 12.23 82L32-143__00 14.24 8MA-094-1 12.18
954053 12.23 82L32-151__00 14.28 8MA-095-1 12.18
954054 12.23 82L32-152__00 14.28 8MA-096-1 12.18
954055 12.23 82L32-163__00 14.28 8MA-097-1 12.18
2002115-E 9.6 82L32-1630000B 14.16 8MW-018-1 12.20
2007115-E 9.6 82L32-16300H0B 14.16 8MW-020-1 12.20
2007208-M 9.2 82L40-1___H_ 14.31 8MW-021-1 12.20
2010115-E 9.6 82L40-103__00 14.22 8MW-022-1 12.20
12/100 5.5 82L40-111__00 14.26 8MW-023-1 12.20
12/200 5.5 82L40-112__00 14.26 010-011-113 15.20
12/300 5.5 82L40-123__00 14.26 010-012-221 15.20
16/100 5.5 82L40-143__00 14.24 010-012-224 15.20
16/200 5.5 82L40-151__00 14.28 010-013-332 15.20
16/300 5.5 82L40-152__00 14.28 010-013-334 15.20
22/100 5.5 82L40-163__00 14.28 010-021-111 15.21
22/200 5.5 82L40-1630000B 14.16 010-021-114 15.21
22/300 5.5 82L40-16300H0B 14.16 010-022-222 15.21
81L12-101__ 14.12 89R20-010-1 12.17 010-022-225 15.21
81L12-141__ 14.12 89R32-010-1 12.17 010-023-333 15.21
81L16-101__ 14.12 89R40-010-1 12.17 010-023-335 15.21
81L16-141__ 14.12 89R40-025-1 12.17 010-210-400 15.22
81L20-101__ 14.12 89R50-025-1 12.17 010-210-501 15.22
81L20-141__ 14.12 89R63-025-1 12.17 010-210-702 15.22
81L25-101__ 14.12 8JG-215-1 12.19 010-211-002 15.22
81L25-141__ 14.12 8JG-217-1 12.19 010-211-004 15.22
82L25-1___H__ 14.31 8JG-218-1 12.19 010-211-502 15.22
82L25-103__00 14.19 8JG-219-1 12.19 010-211-504 15.22
82L25-1030000 14.18 8JG-220-1 12.19 010-212-004 15.22
82L25-10300H0 14.30 8MA-061-1 12.19 020-011-011DE 15.31
82L25-143__00 14.20 8MA-063-1 12.19 020-012-021DE 15.31
82L25-1430000 14.18 8MA-064-1 12.19 020-013-031DE 15.31
82L25-14300H0 14.30 8MA-065-1 12.19 030-1-D-475 15.23
82L25-1430000B 14.16 8MA-066-1 12.19 030-1-S-475 15.23

Ordering no. index
030-1-D-1100 15.24 037-100-122 090-022-225 15.19

030-1-D-2400 15.25 039-101-000DE 15.33 090-023-333 15.19
030-1-D-4000 15.25 039-104-000DE 15.33 090-023-335 15.19
030-1-S-1100 15.24 039-108-000DE 15.33 F-160/-- 5.4
030-1-S-2400 15.25 039-109-000DE 15.33 FL-120/-- 5.4
030-1-S-4000 15.25 051-106-160 15.22 FL-121/45 5.4
031-L-475 15.27 051-112-160 15.22 FL-122/45 5.4
031-S-475 15.27 051-125-120 15.22 FL-160/-- 5.4
031-L-1100 15.27 051-131-160 15.22 FL-161/60 5.4
031-L-2400 15.27 051-137-160 15.22 FL-162/60 5.4
031-L-4000 15.27 051-137-180 15.22 FO-082/40 5.4
031-S-1100 15.27 051-150-160 15.22 FO-120/-- 5.4
031-S-2400 15.27 051-175-160 15.22 FO-121/45 5.4
031-S-4000 15.28 051-187-160 15.22 FO-122/45 5.4
035-125-190 15.5 051-225-160 15.22 FO-160/-- 5.4
035-125-290 15.5 051-250-160 15.22 FO-161/60 5.4
035-132-190 12.6 051-262-160 15.22 FO-162/60 5.4
035-132-290 12.6 051-312-160 15.22 FO-220/-- 5.4
035-140-190 12.7 052-106-160 15.22 FO-221/80 5.4
035-140-290 12.7 052-112-160 15.22 FRL-12 5.9
035-150-190 12.8 052-125-120 15.22 FRL-16 5.9
035-150-290 12.8 052-131-160 15.22 FRF-12 5.9
035-225-190 12.5 052-137-160 15.22 FRF-16 5.9
035-225-290 12.5 052-137-180 15.22 G-082/40 5.4
035-232-190 12.6 052-150-160 15.22 G-120/-- 5.4
035-232-290 12.6 052-175-160 15.22 G-121/45 5.4
035-240-190 12.7 052-187-160 15.22 G-122/45 5.4
035-240-290 12.7 052-225-160 15.22 K-508 5.6
035-250-190 12.8 052-250-160 15.22 K-612 5.6
035-250-290 12.8 052-262-200 15.22 K-816 5.6
036-551-01 12.9 052-312-160 15.22 K-1222 5.6
036-551-02 12.9 090-011-113 15.19 SL3 4.24
036-551-04 12.9 090-012-221 15.19 SME-3-LED 12.20
036-630-01 12.9 090-012-224 15.19 T186-6 10.6
036-630-02 12.9 090-013-332 15.19 T186-12 10.6
036-630-04 12.9 090-013-334 15.19 T186-13 10.4
036-787-01 12.9 090-021-111 15.19 T186-20 10.6
036-787-02 12.9 090-021-114 15.19 T186-24 10.5
036-787-04 12.9 090-022-222 15.19 T186-30 10.6

T186-36 10.5 T402-24 10.12

T186-60 10.5 T402-6 10.12
T186-84 10.5 T500 10.10
T186-96 10.5 T550 10.10
T257-6 10.6 T600-4 10.12
T257-12 10.6 T600-6 10.12
T257-18 10.6 T600-8 10.12
T257-24 10.6 T602-6 10.12
T257-36 10.6 T602-12 10.12
T257-54 10.6 T602-18 10.12
T257-84 10.5 T602-24 10.12
T257-108 10.5 T602-30 10.12
T285-9 10.6 T614-0 10.8
T285-18 10.6 T614-1 10.8
T285-36 10.5 T614-2 10.8
T285-40 10.6 VH3 2.53
T285-48 10.5
T285-60 10.5
T285-84 10.5
T290-9 10.6
T290-13 10.4
T290-18 10.6
T290-36 10.5
T290-40 10.6
T290-48 10.5
T290-60 10.5
T290-84 10.5
T321-10 10.6
T321-24 10.5
T321-36 10.5
T321-60 10.5
T321-84 10.5
T321-96 10.5
T400-4 10.12
T400-6 10.12
T400-8 10.12
T402-12 10.12
T402-18 10.12

Custom Quick
1025 Doris Road, Auburn Hills, MI 48236
Tel: 1.248.836.6750, FAX: 1.248.836.6743
Toll Free Tel: 1.888.DESTACO, Toll Free Fax: 1.800.682-9686
Internet: www.destaco.com, Email: cs-workholding@destaco.com
TM
WORKSHEET
COMPANY INFORMATION DATE:___________________
END USER NAME: ____________________________________________________________________________________________________________
ATTENTION:_________________________________________________________________________________________________________________
REFERENCE: ________________________________________________________________________________________________________________
PHONE: ________________________________________ EXT.: ___________ FAX: ___________________________ EMAIL: _________________
ADDRESS: __________________________________________________________________________________________________________________
CITY: ___________________________________________________________ STATE: _________________________ ZIP: ____________________
DISTRIBUTOR NAME: __________________________________________________________________________________________________________
ATTENTION: ____________________________________________________ REFERENCE: ______________________________________________
ADDRESS: __________________________________________________________________________________________________________________
CITY: ___________________________________________________________ STATE: _________________________ ZIP: ____________________
MODIFICATION INFORMATION
BASE MODEL: __________________________________________________________ (Please make sketch if possible.):
DESCRIPTION OF MODIFICATION: ____________________________________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
DESCRIPTION OF APPLICATION/ENVIRONMENT: __________________________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
MATERIAL TYPE: ________________________________________________________
ESTIMATED QUANTITY: ____________________________________________________
REQUIRED DATE: ________________________________________________________
ACTION TAKEN: _________________________________________________________________________________________________________________
SPECIAL PART # ASSIGNED: ___________________________________ BY: __________________________ RELEASE DATE: _______________________

Custom Quick
Tel: 1.248.836.6750, FAX: 1.248.836.6743
TM
WORKSHEET
END USER NAME: ____________________________________________________________________________________________________________
ATTENTION:_________________________________________________________________________________________________________________
REFERENCE: ________________________________________________________________________________________________________________
ADDRESS: __________________________________________________________________________________________________________________
CITY: ___________________________________________________________ STATE: _________________________ ZIP: ____________________
ADDRESS: __________________________________________________________________________________________________________________
CITY: ___________________________________________________________ STATE: _________________________ ZIP: ____________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
MATERIAL TYPE: ________________________________________________________
REQUIRED DATE: ________________________________________________________
ACTION TAKEN: _________________________________________________________________________________________________________________

Custom Quick
Tel: 1.248.836.6750, FAX: 1.248.836.6743
TM
WORKSHEET
END USER NAME: ____________________________________________________________________________________________________________
ATTENTION:_________________________________________________________________________________________________________________
REFERENCE: ________________________________________________________________________________________________________________
ADDRESS: __________________________________________________________________________________________________________________
CITY: ___________________________________________________________ STATE: _________________________ ZIP: ____________________
ADDRESS: __________________________________________________________________________________________________________________
CITY: ___________________________________________________________ STATE: _________________________ ZIP: ____________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
MATERIAL TYPE: ________________________________________________________
REQUIRED DATE: ________________________________________________________
ACTION TAKEN: _________________________________________________________________________________________________________________

Custom Quick
Tel: 1.248.836.6750, FAX: 1.248.836.6743
TM
WORKSHEET
END USER NAME: ____________________________________________________________________________________________________________
ATTENTION:_________________________________________________________________________________________________________________
REFERENCE: ________________________________________________________________________________________________________________
ADDRESS: __________________________________________________________________________________________________________________
CITY: ___________________________________________________________ STATE: _________________________ ZIP: ____________________
ADDRESS: __________________________________________________________________________________________________________________
CITY: ___________________________________________________________ STATE: _________________________ ZIP: ____________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
MATERIAL TYPE: ________________________________________________________
REQUIRED DATE: ________________________________________________________
ACTION TAKEN: _________________________________________________________________________________________________________________

A True Global Presence: Manual Clamping

Uploaded by

Copyright:

Available Formats

A True Global Presence: Manual Clamping

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

A True Global Presence: Manual Clamping

Uploaded by

Copyright:

Available Formats

A TRUE GLOBAL PRESENCE

Models 6001-M, 6001-MSS: • Locks handle in open

Fixed Handle Pivot

Common Hole Pattern Low Pivot Point • Eliminates sticking points

• Interchangeable with • Provides perpendicular • Provides smooth action

DE-STA-CO’s new 2000 Series Horizontal Hold-Down Action

Flexibility. Safety. Performance.

Models 3011,3011-SS: Models 425, 435, 445 and 470:

Models 353, 359: Models 603-SS, 6015-MSS:

Pneumatic Clamping Technology

Models 8021, 8071, 8101: Series 89R:

Model 8031: Series 82L:

DE-STA-CO has an effective

DE-STA-CO works with

DE-STA-CO has a culture

Manual Clamping Technology

Vertical hold-down clamps 2.1

Horizontal hold-down clamps 3.1

Straight-line action clamps 4.1

Variable stroke straight-line action clamps 5.1

Latch clamps 6.1

Plier clamps 7.1

Stainless steel clamps 8.1

Manual accessories 9.1

CARVER clamps 10.1

Standard pneumatic clamps 11.1

Pneumatic swing clamps 12.1

Pneumatic accessories 13.1

Automation power clamps 14.1

Power sources 15.33

1.6 1.61.6 DE-STA-CO

TECHNICAL EXPERTISE, SERVICE AND SUPPORT

These requirements are fulfilled successfully and reliably using

Workpieces are clamped in nearly all applications of a

Additional applications that use DE-STA-CO clamping products:

Hydraulic Clamping Technology

Our homepage The CAD-Library

The clever, safety link The standard handle

The sturdy clamping bar

What about the forces?

Exerting force Holding capacity

The most important models at a glance

Horizontal hold-down clamp Latch clamp

U-shaped clamp bar Solid clamp bar

Flanged mounting base Straight mounting base

e.g. Model 207-U e.g. Model 207-U-LS

With our wide variety of accessories, you can customize the

Available accessories include:

2 = Vertical hold-down clamp

2 = Horizontal hold-down clamp

3 = Compact hold-down clamp

5 = Modular or heavy-duty vertical and horizontal clamp

6 = Straight line action clamp

DE-STA-CO Subject to technical modifications without notice 2.1

Model 210-U clamping a frame

2.2 Subject to technical modifications without notice DE-STA-CO

2002-SB 600 NEW! Standard 2.7 202-B 200 Standard 2.13

2002-SBR 600 NEW! DE-STA-CO® 2.8 207-LR 500 DE-STA-CO® 2.14

2002-SR 600 NEW! DE-STA-CO® 2.8 207-LBR 500 DE-STA-CO® 2.15