Actuators & Valves

HERSHEY VALVE

Plastic Ball Valve & Butterfly Valve

NUTORK CORPORATION
 Double Union Ball Valve

● Pressure rating:150 PSI @73.4oF(23℃)

● Full port design
● Adjustable seat tightness
● Easy to disassemble by handle
● Less on-line down time for replacement / maintenance
● Actuator could be installed with inserted nut
● Standard Product is without nut
● Pneumatic actuator speciticationmeets with ISO 5211, DIN 3337,VDI/VDE 3845,NAMUR,easy to assemble solenoid valve,limit
Switches and accessories
● Pneumatic actuator max,Air Supply pressure 8 kg/cm 2, min.air pressure 4 kg/cm 2
● Electric actuator operation voltage 1-phase 110/220V 3-phase 220/380/460V
● Electric actuator could manually operate w/o clutch and break

Manual Pneumatic Electric Size Standard Material Seat O-Ring End type
Type Type Type

Socket
ANSI,JIS EPDM
VP-640 VP-680 VP-690 1/2”~4” PVC PTFE Threaded
DIN,BS FPM Flanged
ANSI,JIS Socket
EPDM
VP-641 VP-681 VP-691 1/2”~4” CPVC PTFE Threaded
DIN,BS FPM Flanged
ANSI,JIS EPDM Socket
VP-643 VP-683 VP-693 1/2”~4” PVDF PTFE Threaded
DIN,BS FPM Flanged
ANSI,JIS EPDM Socket
VP-644 VP-684 VP-694 1/2”~4” PP PTFE Threaded
DIN,BS FPM Flanged
ANSI,JIS EPDM Socket
VP-645 VP-685 VP-695 1/2”~4” ABS PTFE Threaded
DIN,BS FPM Flanged
There is no flanged end for BS

NO. Part Material

1 Body UPVC,CPVC,PP,PVDF,ABS

2 Stem O-Ring EPDM,FPM

3 Stem UPVE,CPVC,PP,PVDF,ABS

4 Ball UPVE,CPVC,PP,PVDF,ABS

5 Seat Seal PTFE

6 Carrier O-Ring EPDM,FPM

7 Seal Carrier UPVE,CPVC,PP,PVDF,ABS

8 Union O-Ring EPDM,FPM

9 End Connetor UPVE,CPVC,PP,PVDF,ABS

10 Union Nut UPVE,CPVC,PP,PVDF,ABS

11 Handle ABS,PP

12 Inserted Nut C3604

w w w. n u t o r k . c o m
 Double Union Ball Valve

Dimensions of Socket / Screwed Double Union Ball Valve

SIZE 15mm 20mm 25mm 32mm 40mm 50mm 65mm 80mm 100mm
Nom (1/2”) (3/4”) (1”) (1-1/4”) (1-1/2”) (2”) (2-1/2”) (3”) (4”)
d1 22.30 26.30 32.33 38.43 48.46 60.56 76.60 89.6 114.7
JIS d2 21.70 25.70 31.67 37.57 47.54 59.44 75.87 88.83 113.98
I 22.22 25.4 28.6 31.8 34.9 38.1 60.7 63 69
d1 21.54 26.87 33.65 42.42 48.56 60.63 73.38 89.31 114.76
ANSI d2 21.23 26.57 33.27 42.04 48.11 60.17 72.85 88.7 114.07
I 22.22 25.40 28.58 31.75 34.93 38.10 45.45 47.63 57.15
d1 20.3 25.3 32.3 40.3 50.3 63.3 75.3 90.3 110.4
DIN d2 20.1 25.1 32.1 40.1 50.1 63.1 75.1 90.1 110.1
I 16 19 22 26 31 38 44 51 61
d1 21.5 26.9 33.7 42.4 48.4 60.5 75.5 89.1 114.5
BS 42.2 75.0 88.8 114.1
d2 21.3 26.7 33.5 48.2 60.3
I 16.5 19.5 22.5 27 30 36 44.45 47.63 57.15
PT 14 14 11 11 11 11 11 11 11
thd./in
NPT 14 14 11.5 11.5 11.5 11.5 8 8 8
D 45 55 66 82 98 120 140 163 225
D1 31 37 44 54 65 779 92 108 146
d 12 18 23 30 38 48 61 69 99
L 112 132 144 167 172 206 273 303 333
L1 60 73 78 87 92 112 136 158 176
L2 78 92 100 110 121 147 180 224 278
H1 48 57 66 76 88 108 116 130 178
H2 20.5 26 33 38 42 53 - - -
F 30 33 40 47 52 70 - - -
M M5 M6 M6 M8 M8 M8 - - -
S 7 8 11 11 11 15 - - -

Dimensions of Flanged Double Union Ball Valve

SIZE 15mm 20mm 25mm 32mm 40mm 50mm 65mm 80mm 100mm
Nom (1/2”) (3/4”) (1”) (1-1/4”) (1-1/2”) (2”) (2-1/2”) (3”) (4”)
D1 95 100 125 135 140 155 175 185 210
D2 70 75 90 100 105 120 140 150 175
JIS
L 143 172 187 190 212 234 259 304 372
n-Φe 4-15 4-15 4-19 4-19 4-19 4-19 4-19 8-19 4-19
D 89 98 108 117 127 152 178 191 229
D1 61 70 79 89 99 121 140 152 191
ANSI
L 143 172 187 190 212 234 259 304 372
n-Φe 4-16 4-16 4-16 4-16 4-16 4-19 4-19 4-19 8-19
D 95 105 115 140 150 165 185 200 220
DIN D1 65 75 85 100 110 125 145 163 180
L 130 150 160 180 200 230 290 310 350
n-Φe 4-14 4-14 4-14 4-18 4-18 4-18 4-18 8-18 8-18
D2 45 55 66 82 98 120 140 160 225
d 13 18 23 30 38 48 61 69 100
L1 60 73 78 87 92 112 135 156 176
L2 78 92 100 110 121 147 180 224 278
H1 48 57 66 76 88 108 116 130 178
H2 20.5 26 33 38 42 53
T 13 14 14 16 16 16 18 18 18
F 30 33 40 47 52 70 - - -
M M5 M6 M6 M8 M8 M8
S 7 8 11 11 11 15 - - -

w w w. n u t o r k . c o m
 Double Union Ball Valve

SIZE 15mm 20mm 25mm 32mm 40mm 50mm 65mm 80mm 100mm
Nom (1/2”) (3/4”) (1”) (1-1/4”) (1-1/2”) (2”) (2-1/2”) (3”) (4”)
d1 22.30 26.30 32.33 38.43 48.46 60.56 76.60 89.6 114.7
JIS d2 21.70 25.70 31.67 37.57 47.54 59.44 75.87 88.83 113.98
I 22.22 25.4 28.6 31.8 34.9 38.1 60.7 63 69
d1 21.54 26.87 33.65 42.42 48.56 60.63 73.38 89.31 114.76
ANSI d2 21.23 26.57 33.27 42.04 48.11 60.17 72.85 88.7 114.07
I 22.22 25.40 28.58 31.75 34.93 38.10 45.45 47.63 57.15
d1 20.3 25.3 32.3 40.3 50.3 63.3 75.3 90.3 110.4
DIN d2 20.1 25.1 32.1 40.1 50.1 63.1 75.1 90.1 110.1
I 16 19 22 26 31 38 44 51 61
d1 21.5 26.9 33.7 42.4 48.4 60.5 75.5 89.1 114.5
BS
d2 21.3 26.7 33.5 42.2 48.2 60.3 75.0 88.8 114.1
I 16.5 19.5 22.5 27 30 36 44.45 47.63 57.15
thd./in NPT 14 14 11 11 11 11 11 11 11
PT 14 14 11.5 11.5 11.5 11.5 8 8 8
D 45 55 66 82 98 120 140 163 225
D1 31 37 44 54 65 779 92 108 146
d 12 18 23 30 38 48 61 69 99
L 112 132 144 167 172 206 273 303 333
L1 60 73 78 87 92 112 136 158 176
Double Acting Model NKD-032 NKD-032 NKD-032 NKD-052 NKD-052 NKD-052 NKD-063 NKD-075 NKD-092
Pneumatic L2 110 110 110 153 153 153 174 196 249
Actuator W 45 45 45 71 71 71 83 95 109
Single Acting Model NKS-052 NKS-052 NKS-052 NKS-052 NKS-075 NKS-075 NKS-083 NKS-092 NKS-125
Pneumatic L2 153 153 153 153 196 196 208 249 326
Actuator W 71 71 71 95 95
71 103 109 143
Model NTE-02 NTE-02 NTE-02 NTE-02 NTE-02 NTE-02 NTE-05 NTE-10 NTE-20
On/off Type
Electric Actuator L2 160 160 160 160 160 160 160 196 255
W 97 97 97 97 97 97 113 121 158
Model NTE-05E NTE-05E NTE-05E NTE-05E NTE-05E NTE-05E NTE-05E NTE-10E NTE-20E
Modulating Type
Electric Actuator L2 160 160 160 160 160 160 160 160 160
W 113 113 113 113 113 113 113 113 113
Note：All the above pneumatic actuator @5 bar air pressure.

L2 W L2 W

w w w. n u t o r k . c o m
 Plastic Butterfly Valve

● Pressure rating :2”~10”150 PSI,12”100 PSI,14,16”86 PSI,18”72 PSI,20”~24”51 PSI (Standard stem:SUS 410+heat process
The stem of SUS 304, or SUS 316,or SUS 316L the working pressure is lower.)
● Lower torque and seal hermetically
● Low flow loss
● The opening angle of the disc could be seen clearly through the arrow on top of the gear box.
● ldeally suited in a limited piping space
● Easy to mount actuator with flat zone design at the top of valve
● Pneumatic actuator specification meets with ISO 5211,VDI / VDE 3845,DIN 3337,NAMUR,easy to assemble solenoid valve,limit
Switches and accessories.
● Pneumatic actuator max ,Air Supply pressure 8kg/cm 2 min, air pressure 5kg/cm 2
● Electric actuator operation voltage 1-phase 110 / 220 V, 3-phase 220 / 380 / 460V
● Electric actuator could manually operate w/o clutch and break

Type Type Type Size Standard Material Seat Disc O-Ring End type

ANSI,JIS EPDM
VP-820 VP-830 VP-840 2”-24” PVC EPDM,FPM PP Flanged
DIN,BS FPM
ANSI,JIS EPDM
VP-821 VP-831 VP-841 2”-24” CPVC EPDM,FPM CPVC Flanged
DIN,BS FPM
ANSI,JIS EPDM
VP-823 VP-833 VP-843 2”-24” PVDF EPDM,FPM PVDF Flanged
DIN,BS FPM
ANSI,JIS EPDM
VP-824 VP-834 VP-844 2”-24” PP EPDM,FPM PP Flanged
DIN,BS FPM

NO. Part Material

1 Body UPVC,CPVC,PVDF,PP

2 Disc CPVC,PVDF,PP

3 Seal EPDM,FPM

4 Stem SUS 410

5 Stem O-Ring EPDM,FPM

6 O-Ring EPDM,FPM

7 Handwheel FC 20

8 Gear Box CI POWDER PAINT

9 Bolt & Washer SUS 304

10 Spring Pin STEEL

11 Packing EPDM 6"~14"

12 Small Handle STEEL

w w w. n u t o r k . c o m
 Plastic Butterfly Valve

SIZE 50mm 65mm 80mm 100mm 120mm 150mm 200mm 250mm 300mm 350mm 400mm 450mm 500mm 600mm
Nom
Nom (2”) (2-1/2”) (3”) (4”) (5”) (6”) (8”) (10”) (12”) (14”) (16”) (18”) (20”) (24”)
D1 120 140 150 175 210 240 290 355 400 445 210 565 620 730
JIS
n-Φe 4-19 4-19 8-19 8-19 8-23 8-23 12-23 12-25 16-25 16-25 16-27 20-27 20-27 24-35
D1 120.39 139.44 152.40 190.50 216 241.55 298.5 362 432 476 540 578 635 749
ANSI
n-Φe 4-19 4-19 4-19 8-19 8-22 8-22 8-22 12-25 12-25 12-29 16-29 16-32 20-32 20-35
D1 125 145 160 180 210 240 295 350 400 460 515 565 620 725
DIN
n-Φe 4-18 4-18 8-18 8-18 8-18 8-23 8-23 12-23 12-23 16-23 16-27 20-27 20-27 20-30
D 165 185 200 229 257 285 343 411 490 533 597 635 699 813
D2 56.5 69.5 79.5 102.5 130 152 203 255 309.5 365 406 452 502 603
D3 105 120 123 135 164 169 201 205 237 236 300 335 335 335
H2 103 113 115 135.5 165 177 210 242 302 300 350 370 400 465
H3 13 13 13 13 15 19 21 22 26 25 32 35 40 46
W1 43 46 46 56 69 70.5 85 109 133 127 168 189.5 189 209
W2 29 31 31 40 50 54 69 88 103.5 113 153 163 171 191
Air Connection 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” / 3/8” 1/4” / 3/8” 1/4” / 3/8” 1/4” / 1/2” 1/4” / 1/2”
Double Acting Model NKD-052 NKD-063 NKD-075 NKD-083 NKD-092 NKD-092 NKD-125 NKD-140 NKD-160 NKD-190 NKD-190 NKD-210 NKD-210 NKD-210
Pneumatic L2 153 174 196 208 249 249 326 396 457 538 538 568 568 568
Actuator
W 71 83 95 103 109 109 143 152 174 206 206 226 226 226
Single Acting Model NKS-063 NKS-075 NKS-092 NKS-105 NKS-125 NKS-125 NKS-140 NKS-190 NKS-210 NKS-240 NKS-240 NKS-240 NKS-270 NKS-270
Pneumatic L2 174 196 249 278 326 326 396 538 568 660 660 660 740 740
Actuator
W 83 95 109 120 143 143 152 206 226 260 260 260 294 294
On/off Type Model NTE-02 NTE-05 NTE-05 NTE-10 NTE-10 NTE-20 NTE-20 NTE-40 NTE-60 NTE-100 NTE-160 NTE-160 NTE-160 NTE-160
Electric L2 160 160 160 196 196 255 255 255 255 310 310 310 310 310
Actuator
W 97 113 113 121 121 158 158 158 158 207 207 207 207 207
Modulating Model NTE-05E NTE-05 NTE-05E NTE-10E NTE-10E NTE-20E NTE-20E NTE-40E NTE-60E NTE-100E NTE-160E NTE-160E NTE-160E NTE-160E
Type Electric L2 160 160 160 196 196 255 255 255 255 310 310 310 310 310
Actuator
W 113 113 113 121 121 158 158 158 158 207 207 207 207 207
Note：All the above pneumatic actuator @5 bar air pressure L2 W

NUTORK Corp.
China Office:
USA Office:
5010 Wright RD. Suite 200B Stafford, No.10,Lane 899, Zhuguang Road,
TX 77478 Qingpu Area, Shanghai,China
Tel: +1-281-222-0018 Tel: 021-59887103/59888463/59888436
Email: nutork-usa@nutork.com Fax: 021-59887203
Website: www.nutork.com Email: nutork@nutork.com