Gfps 8237 Product Range PVC C en

GF Piping Systems
PVC-C
Product Range International 2015
Piping systems for

industrial application
List of abbreviations
ANSI American National Standard Tg Malleable Iron
ASTM American Society for Testing and d Pipe outside diameter
Materials FM Fusion Method
BS British Standard DN Nominal bore
DIN Deutsche Industrie-Normen PN Nominal pressure at 20°C, water
ISO International Standardization kg Weight in kilograms
Organisation g Weight in grams
ABS Acrylnitril Butadien Styrene SP Standard pack. The figure given
PVC-U Polyvinyl Chloride indicates the quantity of fittings
PVC-C Polyvinyl Chloride chlorinated contained in a standard pack
PP Polypropylene, heat stabilised GP Gross pack. The figure given
PP-N Polypropylene, Random indicates the quantity of fittings
copolymer unpigmented contained in a gross pack
PE Polyethylene G Pipe thread, not pressure tight
PVDF Polyvinylidene fluoride in the thread to ISO 228/1
EPDM Ethylene Propylene Rubber NPT Taper male thread pressure tight in
FPM Fluorine Rubber, e.g. Viton® the thread to ANSI B 1.20.1
NBR Nitrile Rubber R Taper male thread, pressure tight
IIR Butyl Rubber in the thread to ISO 7/DIN 2999/1
CSM Chlore Sulphonyl Polythene, e. g. Rc Taper female thread, pressure tight
Hypalon® in the thread to ISO 7/1
CR Chloroprene Rubber, e.g. Rp Parallel female thread, pressure
Neoprene® tight in the thread to ISO 7/DIN 999/1
PROGEF GF of PP Tr Trapezoid thread
PTFE Polytetrafluorethylene, e.g. Teflon® SC Size of hexagon bolts
UP-GF Unsaturated polyester resin s A/F
glassfibre reinforced e Wall thickness
St Steel AL Number of bolt holes
Ms Brass ®
Registered trade-mark
3
Application area of pipes and fittings
General
The choice of material and the pressure rating of the
pipe components are important for both operating safety
and for attaining the specified minimum operational life
of the system.
The decisive factors are:
• Operating pressur
• Operating temperatur
• Medium transported
• Duration of service
Separate calculations are necessary if safety factors are
different or the operational lifetime is modified.
The chemical resistance of the material used can be
determined from of our special list for "Chemical resist-
ance of thermoplastics and elastomers for piping
systems".
Pressure/temperature diagram for PVC-C

The design factor recommended by GF is incorporated.
It can be used for water or media resembling water, in
other words, media which have no derating factor
regarding the chemical resistance.
Remark: Please take into account the pressure /
temperature diagrams for valves and special fittings.
Because of the construction and/or sealing material used,
differences are possible when compared with pipes and
fittings. This information can be found in the planning
fundamentals of the relevant types of valves, respectively
special fittings.
Under certain conditions working temperatures up to
90°C are possible for limited times. Please contact your
local GF representative for advice on any applications
lying outside of our standard guidelines.

P Permissible pressure in bar, psi

T Temperature in °C, °F

4
PVC-C Standard Pipes, Fittings, Unions, Flanges and
Flange Adaptors
Page
Pipes 6
Fittings 7
Adaptor fittings 12
Unions 14
Flange adaptors 23
Backing flanges 24
Seals 27
Pipe clips metric 29
PVC-C accessories 33
5
Pipes
Pipe PVC-C grey
Series S4 SDR9 nominal pressure PN16
Model:
• Material: PVC-C
• Colour: RAL 7038 - agate grey
• Dimension: DIN 8079, EN ISO 15493
• Pipe length: 5m, with plain ends
• Minimum order quantity: 1 length
d PN Code Weight di e
[mm] [bar] [kg ⁄ m] [mm] [mm]
16 16 163 017 130 0.136 12.4 1,8

20 16 163 017 131 0.217 15.4 2,3

PF 2 80 449 001 25 16 163 017 132 0.326 19.4 2,8

Pipe PVC-C grey
Series S6.3 SDR13.6 nominal pressure PN16
Model:
• Material: PVC-C
d PN Code Weight e di
32 16 163 017 133 0.379 2.4 27.2

40 16 163 017 134 0.589 3.0 34.0

50 16 163 017 135 0.896 3.7 42.6
63 16 163 017 136 1.420 4.7 53.6
75 16 163 017 137 2.010 5.6 63.0
90 16 163 017 138 2.880 6.7 76.6

110 16 163 017 139 4.270 8.2 93.8

PF 2 80 449 001 160 16 163 017 142 8.970 11.9 136.4

Pipe PVC-C grey
Series S10 SDR21 nominal pressure PN10
Model:
• Material: PVC-C
d PN Code Weight e di
75 10 163 017 187 1.320 3.6 67.8

90 10 163 017 188 1.930 4.3 81.4

110 10 163 017 189 2.890 5.3 99.4
160 10 163 017 192 6.060 7.7 124.6
PF 2 80 449 003 225 10 163 017 195 11.900 10.8 203.4

6
Fittings
Bend 90° PVC-C metric
• Radius = 2 d
d PN Code SP Weight z D L
[mm] [bar] [kg] [mm] [mm] [mm]
20 16 723 000 106 10 0.032 40 27 58

25 16 723 000 107 10 0.055 50 35 71

32 16 723 000 108 10 0.080 64 38 88
40 16 723 000 109 30 0.143 80 54 109
50 16 723 000 110 5 0.327 100 61 131
63 16 723 000 111 17 0.547 126 76 163

75 16 723 000 112 5 0.847 150 90 194

90 16 723 000 113 5 1.470 180 113 231
110 16 723 000 114 5 2.943 220 137 284
160 16 723 000 117 1 5.247 320 192 406

PF 2 32 450 009
Bend 90° short pattern PVC-C metric

• Radius = 0,75 d
225 10 723 010 120 1 7.930 168 256 287

PF 2 32 450 009
7
Elbow 90° PVC-C metric
16 16 723 100 105 10 0.015 9 21 23

20 16 723 100 106 10 0.014 11 25 27

25 16 723 100 107 10 0.025 14 31 33
32 16 723 100 108 10 0.047 17 40 39
40 16 723 100 109 10 0.077 21 49 47
50 16 723 100 110 10 0.139 26 61 57

63 16 723 100 111 10 0.259 33 76 72

75 16 723 100 112 5 0.437 40 90 84
90 16 723 100 113 5 0.626 46 110 97
110 16 723 100 114 4 1.085 61 128 116
160 16 723 100 117 1 3.097 80 185 166

PF 2 32 450 001
Elbow 45° PVC-C metric

16 16 723 150 105 10 0.008 5 21 19

20 16 723 150 106 10 0.011 5 25 21

25 16 723 150 107 10 0.021 6 31 25
32 16 723 150 108 10 0.037 8 40 30
40 16 723 150 109 5 0.063 10 49 36
50 16 723 150 110 5 0.110 12 61 43

63 16 723 150 111 10 0.205 14 76 52

75 16 723 150 112 5 0.323 17 88 61
90 16 723 150 113 5 0.526 20 106 71
110 16 723 150 114 10 0.782 28 137 89
160 16 723 150 117 1 2.384 36 185 122
225 10 723 150 120 1 4.833 49 250 168

PF 2 32 450 002
Tee 90° PVC-C metric

16 16 723 200 105 10 0.014 9 21 23

20 16 723 200 106 10 0.020 11 25 27

25 16 723 200 107 10 0.035 14 31 33
32 16 723 200 108 10 0.061 17 40 39
40 16 723 200 109 10 0.111 21 49 47
50 16 723 200 110 10 0.198 26 61 57

63 16 723 200 111 10 0.365 34 76 72

75 16 723 200 112 5 0.581 40 90 84
90 16 723 200 113 5 0.945 47 107 98
110 16 723 200 114 6 1.450 55 128 116
160 16 723 200 117 1 5.580 81 193 167
225 10 723 200 120 1 9.560 114 256 233

PF 2 32 450 003
8
Tee 45° PVC-C metric
d PN Code SP Weight z z1 D L L1
[mm] [bar] [kg] [mm] [mm] [mm] [mm] [mm]
20 10 723 250 106 10 0.039 30 6 28 68 46

25 10 723 250 107 10 0.062 36 9 33 83 55

32 10 723 250 108 10 0.102 45 10 41 99 67
40 10 723 250 109 10 0.172 56 10 50 118 82
50 10 723 250 110 10 0.289 66 12 60 140 97
63 10 723 250 111 10 0.449 85 14 74 175 123

75 6 723 250 112 5 0.857 101 18 91 207 145

90 6 723 250 113 1 1.334 122 20 107 245 173
110 6 723 250 114 3 2.677 149 27 134 298 210

PF 2 32 450 026
Cross PVC-C metric

32 16 723 300 108 10 0.101 17 43 39

63 16 723 300 111 5 0.511 34 79 72

PF 2 32 450 036
Socket PVC-C metric

16 16 723 910 105 10 0.008 3 22 31

20 16 723 910 106 10 0.010 3 26 35

25 16 723 910 107 10 0.017 3 31 41
32 16 723 910 108 10 0.029 3 39 47
40 16 723 910 109 10 0.049 3 49 55
50 16 723 910 110 10 0.085 3 61 65

63 16 723 910 111 10 0.155 3 76 79

75 16 723 910 112 10 0.204 4 87 92
90 16 723 910 113 10 0.338 5 110 107
110 16 723 910 114 5 0.765 5 131 132
160 16 723 910 117 2 1.605 8 183 180
PF 2 32 450 004 225 10 723 910 120 1 3.644 10 253 248

9
Tee 90° reducing PVC-C metric
*Tee 90° delivered with the required reducing bushes
d1 d PN Code SP Weight z1 L1 z D L
[mm] [mm] [bar] [kg] [mm] [mm] [mm] [mm] [mm]
20 25 16 723 200 134 10 0.042 14 30 14 33 33

25 32 16 723 200 138 10 0.069 17 36 17 41 39

25 40 16 723 200 151 10 0.120 23 42 23 50 49
32 40 16 723 200 147 10 0.120 23 45 23 50 49
20 50 16 723 200 009 5 0.196 28 44 28 62 59
25 50 16 723 200 010 5 0.192 28 47 28 62 59

32 50 16 723 200 164 10 0.199 28 50 28 62 59

25 63 16 723 200 011 10 0.358 34 53 34 77 73
32 63 16 723 200 178 5 0.368 34 56 35 77 73
50 63 16 723 200 170 5 0.096 34 65 35 77 73
* 63 75 16 723 200 184 8 0.766 47 84 41 92 84

* 32 90 16 723 200 142 6 1.436 75 97 46 111 97

* 63 90 16 723 200 145 5 1.166 66 97 46 111 97
* 32 110 16 723 200 135 3 2.796 101 116 55 128 116
* 90 110 16 723 200 137 3 2.677 71 116 55 128 116

PF 2 32 450 010
Reducing bush short pattern PVC-C metric

Model:
• With solvent cement spigot and socket metric
d d1 PN Code SP Weight z L
[mm] [mm] [bar] [kg] [mm] [mm]
* 20 16 16 723 900 334 10 0.004 2 16

* 25 20 16 723 900 337 10 0.004 3 19

* 32 20 16 723 900 342 10 0.015 6 22
* 32 25 16 723 900 341 10 0.009 4 22
40 20 16 723 900 348 10 0.023 10 26
40 25 16 723 900 347 10 0.024 7 26

* 40 32 16 723 900 346 10 0.017 4 26

50 20 16 723 900 355 10 0.036 15 31
50 25 16 723 900 354 10 0.037 12 31
50 32 16 723 900 353 10 0.050 9 31
* 50 40 16 723 900 352 10 0.032 5 31

63 32 16 723 900 360 10 0.086 16 38

63 40 16 723 900 359 10 0.074 12 38
* 63 50 16 723 900 358 10 0.061 6 38
75 50 16 723 900 365 10 0.115 13 44
* 75 63 16 723 900 364 10 0.086 6 44

90 50 16 723 900 372 10 0.196 20 51

90 63 16 723 900 371 10 0.183 14 51
* 90 75 16 723 900 370 10 0.146 8 51
110 63 16 723 900 378 5 0.329 24 61
* 110 90 16 723 900 376 5 0.283 10 61

160 110 16 723 900 390 5 0.956 25 86

225 160 16 723 900 396 2 2.380 33 119

PF 2 32 450 017
10
Reducing bush long pattern PVC-C metric
Model:
• With solvent cement spigot and socket metric
d1 d PN Code SP Weight z L
[mm] [mm] [bar] [kg] [mm] [mm]
20 32 16 723 910 342 10 0.021 30 46

25 40 16 723 910 347 10 0.036 36 55

25 50 16 723 910 354 10 0.058 44 63
32 63 16 723 910 360 10 0.110 54 76
40 75 16 723 910 366 5 0.165 62 88
63 90 16 723 910 371 5 0.311 74 112

PF 2 32 450 035
Cap PVC-C metric

d PN Code SP Weight D L
[mm] [bar] [kg] [mm] [mm]
16 16 723 960 105 10 0.008 26 24

20 16 723 960 106 10 0.011 30 25

25 16 723 960 107 10 0.018 37 30
32 16 723 960 108 10 0.029 44 34
40 16 723 960 109 10 0.046 55 41
50 16 723 960 110 10 0.064 64 44

63 16 723 960 111 5 0.120 80 54

75 16 723 960 112 5 0.162 87 65
90 16 723 960 113 10 0.315 112 77
110 16 723 960 114 5 0.692 145 101
160 10 723 960 117 2 1.599 188 130

PF 2 32 450 005
Hose nozzle PVC-C metric

Model:
• With solvent cement spigot and parallel hose connection
d PN Code SP Weight D L
[mm] [bar] [kg] [mm] [mm]
16 16 723 960 405 10 0.009 16 57

20 16 723 960 406 10 0.016 20 73

25 16 723 960 407 10 0.023 25 79
PF 2 32 450 024 32 16 723 960 408 10 0.038 30 89

11
Adaptor fittings
Elbow 90° PVC-C metric Rp
Model:
• With solvent cement socket metric and parallel female thread Rp
• Reinforcing ring stainless (A2)
• Connection to plastic or metal threads
• Install with low mechanical stress and avoid large cyclic temperature changes
• Do not use thread sealing pastes that are harmful to PVC-C
Rp d PN Code SP Weight z1 z2 D L
[inch] [mm] [bar] [kg] [mm] [mm] [mm] [mm]
∕2 20 16 723 100 206 10 0.024 11 14 30 27

1

3
∕4 25 16 723 100 207 10 0.037 14 17 35 33
1 32 16 723 100 208 40 0.063 17 22 45 39
1 1∕4 40 16 723 100 209 100 0.134 23 27 55 50
1 1∕2 50 16 723 100 210 5 0.199 27 36 62 58
2 63 16 723 100 211 10 0.337 33 46 75 73

PF 2 32 450 011

Socket PVC-C metric Rp

Model:
• With solvent cement socket metric and parallel female thread Rp
Rp d PN Code SP Weight z L s
[inch] [mm] [bar] [kg] [mm] [mm] [mm]
∕2 20 16 723 910 206 10 0.027 4 35 32

1

3
∕4 25 16 723 910 207 10 0.035 3 40 36
1 32 16 723 910 208 10 0.059 3 45 46
1 1∕4 40 16 723 910 209 10 0.093 5 51 55
1 1∕2 50 16 723 910 210 10 0.133 7 59 65
2 63 16 723 910 211 5 0.211 7 69 80

PF 2 32 450 012

Reducing bush PVC-C metric Rp

Model:
• With solvent cement spigot metric and parallel female thread Rp
d Rp PN Code SP Weight z D L
[mm] [inch] [bar] [kg] [mm] [mm] [mm]
20 ∕8 16 723 910 434 10 0.016 7 25 35

3

25 1
∕2 16 723 910 437 10 0.022 7 30 41
32 3
∕4 16 723 910 441 10 0.033 15 35 48
40 1 16 723 910 446 10 0.061 20 45 56
50 1 1∕4 16 723 910 452 10 0.101 20 55 66
PF 2 32 450 022 63 1 1∕2 16 723 910 458 5 0.161 10 62 77

12
Adaptor nipple PVC-C metric R
Model:
• With solvent cement spigot metric and taper male thread R
• Connection to plastic threads only
R d PN Code SP Weight L z s
[inch] [mm] [bar] [kg] [mm] [mm] [mm]
∕8 16 16 723 910 505 10 0.012 35 8 27

3

PF 2 32 450 018
Adaptor socket nipple PVC-C metric R

Model:
• With solvent cement spigot/socket metric and taper male thread R
d R d1 PN Code SP Weight z z1 s
[mm] [inch] [mm] [bar] [kg] [mm] [mm] [mm]
16 ∕2 20 16 723 910 556 10 0.017 42 28 32

1

20 3
∕4 25 16 723 910 557 10 0.026 47 31 36
25 1 32 16 723 910 558 10 0.043 54 35 46
32 1 1∕4 40 16 723 910 559 10 0.065 60 38 55
40 1 1∕2 50 16 723 910 560 10 0.102 66 40 65
50 2 63 16 723 910 561 5 0.173 78 47 80

PF 2 32 450 023
Installation fitting type 310 PVC-C

For socket systems metric
Range of use:
• Compatible Signet flow sensors: type 2551, 2537, 515, 8510, 2536, 8512
• Compatible Signet pH/ORP sensors: type 2724, 2725, 2726
Attention:
• sensor length depends on installation fitting
Model:
• Threaded outlet 1 ¼" NPSM
• Body and union nut PVDF
• Union end with solvent cement socket PVC-C
d DN PN EPDM SP Weight FPM SP Weight
[mm] [mm] [bar] Code [kg] Code [kg]
20 15 16 723 310 006 1 0.250 723 310 036 1 0.250

25 20 16 723 310 007 1 0.355 723 310 037 1 0.355

32 25 16 723 310 008 1 0.427 723 310 038 1 0.427
40 32 16 723 310 009 1 0.700 723 310 039 1 0.700
50 40 16 723 310 010 1 0.850 723 310 040 1 0.850
63 50 16 723 310 011 1 1.182 723 310 041 1 1.182

d DN L z L1 D H Sensor Type
[mm] [mm] [mm] [mm] [mm] [mm] [mm]
20 15 132 49 90 45 76 flow X0; pH XX

25 20 148 53 100 55 78 flow X0; pH XX

32 25 164 58 110 62 81 flow X0; pH XX
40 32 172 58 110 75 85 flow X0; pH XX
50 40 188 63 120 84 89 flow X0; pH XX
PF 2 98 930 004 63 50 212 68 130 101 95 flow X0; pH XX

13
Unions
Solvent cement unions
Union for solvent cement jointing PVC-C metric
Model:
• Silicone free / paint-compatible
• Union End: solvent socket metric
• Union bush: Solvent cement socket metric
• With O-ring gasket
d PN EPDM SP Weight FPM SP Weight
[mm] [bar] Code [kg] Code [kg]
16 16 723 510 155 10 0.028 723 510 180 0 0.028

20 16 723 510 156 10 0.046 723 510 181 0 0.046

25 16 723 510 157 10 0.071 723 510 182 0 0.071
32 16 723 510 158 10 0.099 723 510 183 0 0.099
40 16 723 510 159 10 0.190 723 510 184 0 0.190
50 16 723 510 160 5 0.240 723 510 185 0 0.240

63 16 723 510 161 10 0.425 723 510 186 0 0.425

75 10 723 510 162 2 0.670 723 510 187 0 0.670
90 10 723 510 163 2 1.008 723 510 188 0 1.008
110 10 723 510 164 2 1.553 723 510 189 0 1.553

L2 z1 z2 D L1 G/Tr
[mm] [mm] [mm] [mm] [mm] [inch]
24 3 8 35 19 3/4

26 3 9 43 21 1
29 3 9 53 24 1 1/4
33 3 9 60 27 1 1/2
39 3 10 74 32 2
46 3 10 83 33 2 1/4

58 3 10 103 40 2 3/4
62 3 18 135 47 Tr108x5
69 5 18 158 56 Tr128x5
PF 2 32 450 021 72 5 11 188 66 Tr154x6

Union PVC-C metric
Model:
• Union End: Solvent cement socket metric
• Jointing face: With O-ring groove
• Gasket: O-ring EPDM code no. 748 410 005-016, for d90 748 410 248
d PN EPDM SP Weight FPM SP Weight
[mm] [bar] Code [kg] Code [kg]
16 16 723 510 105 10 0.028 723 510 130 10 0.027

20 16 723 510 106 10 0.046 723 510 131 10 0.044

25 16 723 510 107 10 0.063 723 510 132 10 0.072
32 16 723 510 108 10 0.090 723 510 133 10 0.098
40 16 723 510 109 10 0.158 723 510 134 10 0.167
50 16 723 510 110 5 0.214 723 510 135 10 0.098

63 16 723 510 111 10 0.360 723 510 136 10 0.362

75 10 723 510 112 2 0.650 723 510 137 2 0.670
90 10 723 510 313 2 0.994 723 510 338 2 1.008
110 10 723 510 114 1 1.509 723 510 139 1 1.523

z1 z2 D L1 L2 G/Tr
3 8 35 19 24 3/4

3 9 43 21 26 1
3 9 53 24 29 1 1/4
3 9 60 27 33 1 1/2
3 10 74 32 39 2
3 10 83 33 46 2 1/4

3 10 103 40 58 2 3/4
3 18 135 47 62 Tr108x5
5 18 158 56 69 Tr128x5
PF 2 32 450 007 5 11 188 66 72 Tr154x6

14
Adaptor unions
Adaptor union PVC-C metric Rp
Model:
• Union End: Solvent cement socket metric
• Union Bush: Parallel female thread Rp
• Gasket: O-ring EPDM code no. 748 410 005-011
Rp d PN EPDM SP Weight FPM SP Weight
[inch] [mm] [bar] Code [kg] Code [kg]
∕8 16 16 723 510 205 10 0.022 723 510 230 0 0.022

3

1
∕2 20 16 723 510 206 10 0.047 723 510 231 0 0.040
3
∕4 25 16 723 510 207 10 0.065 723 510 232 0 0.065
1 32 16 723 510 208 10 0.103 723 510 233 0 0.103
1 1∕4 40 16 723 510 209 10 0.615 723 510 234 0 0.174
1 1∕2 50 16 723 510 210 2 0.239 723 510 235 0 0.239
2 63 16 723 510 211 2 0.400 723 510 236 0 0.435

z1 z2 D L1 L2 G
3 13 35 17 24 3/4

3 13 43 19 26 1
3 14 51 22 29 1 1/4
3 15 58 25 32 1 1/2
3 19 74 31 38 2
3 26 83 34 45 2 1/4
PF 2 32 450 033 3 33 100 41 56 2 3/4

Adaptor union PVC-C metric/ASTM
Model:
• Union End: solvent cement socket inch ASTM
d Inch PN EPDM SP Weight FPM SP Weight
[mm] [inch] [bar] Code [kg] Code [kg]
16 3/8 10 723 514 105 10 0.022 723 514 130 0 0.022

20 1/2 10 723 514 106 10 0.047 723 514 131 0 0.047

25 3/4 10 723 514 107 10 0.065 723 514 132 0 0.065
32 1 10 723 514 108 10 0.103 723 514 133 0 0.093
40 11/4 10 723 514 109 10 0.174 723 514 134 0 0.161
50 11/2 10 723 514 110 5 0.239 723 514 135 0 0.226
63 2 10 723 514 111 10 0.435 723 514 136 0 0.372

d z1 z2 D L1 L2 G
[mm] [mm] [mm] [mm] [mm] [mm] [inch]
16 4 10 35 17 24 3/4

20 2 10 43 19 26 1
25 4 10 51 22 29 1 1/4
32 4 10 58 25 33 1 1/2
40 6 12 74 29 39 2
50 11 14 83 34 46 2 1/4
PF 2 32 450 034 63 17 18 100 41 58 2 3/4

15
Adaptor union PVC-C/stainless steel metric Rp
Model:
• Union Nut: PVC-C
• Union Bush: Solvent cement socket PVC-C metric
• Union End: Stainless Steel WN 1.4404 (316L), parallel female thread Rp
d Rp PN EPDM SP Weight FPM SP Weight
[mm] [inch] [bar] Code [kg] Code [kg]
16 ∕8 16 723 540 205 10 0.053 723 540 230 0 0.053

3

20 1
∕2 16 723 540 206 10 0.096 723 540 231 0 0.096
25 3
∕4 16 723 540 207 5 0.154 723 540 232 0 0.154
32 1 16 723 540 208 5 0.212 723 540 233 0 0.212
40 1 1∕4 16 723 540 209 2 0.356 723 540 234 0 0.347
50 1 1∕2 16 723 540 210 2 0.455 723 540 235 0 0.502
63 2 16 723 540 211 2 0.721 723 540 236 0 0.721

z1 z2 D L L1 L2 G s
[mm] [mm] [mm] [mm] [mm] [mm] [inch] [mm]
9 10 35 43 19 24 3/4 19

11 10 43 50 24 26 1 24
11 10 51 55 26 29 1 1/4 29
12 10 58 61 29 33 1 1/2 36
14 12 74 71 33 39 2 45
15 14 83 79 34 46 2 1/4 54
PF 2 32 450 037 15 18 100 95 39 58 2 3/4 63

Adaptor union PVC-C/stainless steel metric R
Model:
• Union End: Stainless Steel WN 1.4404 (316L), taper male thread R
R d PN EPDM SP Weight FPM SP Weight
[inch] [mm] [bar] Code [kg] Code [kg]
∕8 16 16 723 540 705 10 0.073 723 540 730 0 0.073

3

1
∕2 20 16 723 540 706 10 0.126 723 540 731 0 0.120
3
∕4 25 16 723 540 707 5 0.174 723 540 732 0 0.174
1 32 16 723 540 708 5 0.262 723 540 733 0 0.259
1 1∕4 40 16 723 540 709 2 0.476 723 540 734 0 0.482
1 1∕2 50 16 723 540 710 2 0.535 723 540 735 0 0.535
2 63 16 723 540 711 2 0.931 723 540 736 0 0.982

z D L L1 L2 G s
[mm] [mm] [mm] [mm] [mm] [inch] [mm]
40 35 54 30 24 3/4 19

44 43 60 34 26 1 24
46 51 65 36 29 1 1/4 32
50 58 72 40 33 1 1/2 37
58 74 84 46 39 2 48
62 83 93 48 46 2 1/4 54
PF 2 32 450 037 73 100 111 55 58 2 3/4 69

16
Adaptor union PVC-C/stainless steel metric welding end
Model:
• Union Nut: Stainless Steel WN 1.4404 (316L)
• Union End: Stainless Steel 1.4404 (316L) with welding end
d1 d PN EPDM SP Weight FPM SP Weight
17 16 16 723 545 505 10 0.101 723 545 530 0 0.101

21 20 16 723 545 506 10 0.176 723 545 531 0 0.171

27 25 16 723 545 507 5 0.204 723 545 532 0 0.204
34 32 16 723 545 508 5 0.313 723 545 533 0 0.313
42 40 16 723 545 509 2 0.493 723 545 534 0 0.493
48 50 16 723 545 510 2 0.566 723 545 535 0 0.566
60 63 16 723 545 511 2 0.902 723 545 536 0 0.885

z L L1 L2 e G s
[mm] [mm] [mm] [mm] [mm] [inch] [mm]
28 42 18 24 1.6 3/4 32

32 48 22 26 2.0 1 41
33 52 23 29 2.0 1 1/4 46
36 58 26 33 2.0 1 1/2 55
38 64 26 39 2.0 2 68
42 73 28 46 2.0 2 1/4 74
PF 2 32 450 037 50 88 32 58 2.6 2 3/4 88

Adaptor union PVC-C/malleable iron galvanised metric Rp
Model:
• Union End: malleable iron with parallel female thread Rp
Rp d Code SP Weight z2 G s z1 L L2 L1 D
[inch] [mm] [kg] [mm] [inch] [mm] [mm] [mm] [mm] [mm] [mm]
∕2 20 723 530 306 10 0.075 10 1 25 9 48 26 22 43

1

3
∕4 25 723 530 307 5 0.112 10 1 1/4 31 7 51 29 22 51
1 32 723 530 308 5 0.157 10 1 1/2 38 9 58 33 26 58
1 1∕4 40 723 530 309 2 0.300 12 2 48 12 69 39 31 72
1 1∕2 50 723 530 310 2 0.384 14 2 1/4 54 14 78 46 33 83
2 63 723 530 311 5 0.603 18 2 3/4 67 11 91 58 35 100

PF 2 32 450 019
17
Adaptor union PVC-C/malleable iron galvanised metric R
Model:
• Union End: Malleable iron with taper male thread R
R d Code SP Weight s L2 G z L1 D L
[inch] [mm] [kg] [mm] [mm] [inch] [mm] [mm] [mm] [mm]
∕2 20 723 530 806 10 0.114 25 26 1 50 40 43 66

1

3
∕4 25 723 530 807 5 0.165 31 29 1 1/4 53 43 51 72
1 32 723 530 808 5 0.205 38 33 1 1/2 58 48 58 80
1 1∕4 40 723 530 809 2 0.403 48 39 2 69 57 72 95
1 1∕2 50 723 530 810 2 0.539 54 46 2 1/4 73 59 83 104
2 63 723 530 811 8 0.787 67 58 2 3/4 80 62 100 118

PF 2 32 450 020
Adaptor union PVC-C/brass metric Rp

Model:
• Union End: Brass with parallel female thread Rp
Rp PN d Code SP Weight L1 D L L2 s z1 z2 G
[inch] [bar] [mm] [kg] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [inch]
∕2 16 20 723 550 506 10 0.093 22 43 48 26 25 7 10 1

1

3
∕4 16 25 723 550 507 5 0.152 25 51 54 29 30 9 10 1 1/4
1 16 32 723 550 508 5 0.198 27 58 60 33 36 8 11 1 1/2
1 1∕4 16 40 723 550 509 2 0.351 31 72 70 39 46 10 13 2
1 1∕2 16 50 723 550 510 2 0.507 35 83 81 46 55 13 15 2 1/4
2 16 63 723 550 511 5 0.809 40 100 98 58 65 14 21 2 3/4

Adaptor union PVC-C/brass metric R
Model:
• Union End: Brass with taper male thread R
R d PN* Code SP Weight z s G L1 D L L2
[inch] [mm] [bar] [kg] [mm] [mm] [inch] [mm] [mm] [mm] [mm]
∕2 20 16 723 550 906 10 0.132 47 25 1 37 43 63 26

1

1
∕2 25 16 723 550 957 5 0.230 47 30 1 1/4 37 51 66 29
3
∕4 25 16 723 550 907 5 0.203 52 30 1 1/4 42 51 71 29
1 25 16 723 550 967 5 0.312 56 30 1 1/4 46 51 75 29
1
∕2 32 16 723 550 958 5 0.302 48 36 1 1/2 37 58 70 33
∕4 32 16 723 550 968 5 0.302 53 36 1 1/2 52 58 75 33

3

1 32 16 723 550 908 5 0.393 57 36 1 1/2 46 58 79 33

1 1∕4 40 16 723 550 909 2 0.493 65 46 2 52 72 91 39
1 1∕2 50 16 723 550 910 2 1.468 71 55 2 1/4 56 83 102 46
2 63 16 723 550 911 8 1.103 87 65 2 3/4 67 100 125 58

18
Spare parts unions
O-Ring gasket
Model:
• For unions and adaptor unions
• Hardness approx. 65° Shore
• EPDM minimum temperature -40°C
• FPM minimum temperature -15°C
DN d EPDM PF SP Weight
[mm] [mm] Code [kg]
8 10 ‐ 12 748 410 004 2 30 162 006 100 0.002

10 16 748 410 005 2 30 162 006 0 0.001

15 20 748 410 006 2 30 162 006 0 0.001
20 25 748 410 007 2 31 800 999 0 0.004
25 32 748 410 008 2 30 162 006 0 0.002
32 40 748 410 009 2 30 162 006 0 0.001

40 50 748 410 010 2 30 162 006 0 0.001

50 63 748 410 011 2 30 162 006 0 0.010
65 75 748 410 014 2 31 800 999 500 0.001
80 90 748 410 248 2 30 162 006 1 0.008
100 110 748 410 016 2 31 800 999 100 0.016

FPM PF SP Weight D closest D1 D2
Code [kg] [mm] inch [mm] [mm]
[inch]
749 410 004 2 30 162 006 0 0.001 18 ∕4 12 3

1

749 410 005 2 30 162 006 0 0.001 21 3

∕8 16 3
749 410 006 2 30 162 006 0 0.001 27 1
∕2 20 4
749 410 007 2 31 800 999 100 0.002 35 3
∕4 28 4
749 410 008 2 30 162 006 100 0.002 40 1 33 4
749 410 009 2 30 162 006 0 0.007 51 1 1∕4 41 5

749 410 010 2 30 162 006 0 0.060 58 1 1∕2 47 5

749 410 011 2 30 162 006 100 0.003 70 2 60 5
749 410 014 2 31 800 999 100 0.012 93 2 1∕2 82 5
749 410 248 2 30 162 006 1 0.020 105 3 95 5
749 410 016 2 31 800 999 50 0.031 134 4 120 7

Union nut PVC-C
Model:
• For union 723 510 105-114
d PN Code SP Weight L G/Tr
[mm] [bar] [kg] [mm] [inch]
16 16 723 690 005 0 0.012 21 3/4

20 16 723 690 006 0 0.020 23 1

25 16 723 690 007 0 0.021 24 1 1/4
32 16 723 690 008 0 0.031 26 1 1/2
40 16 723 690 009 0 0.053 29 2
50 16 723 690 010 0 0.092 34 2 1/4

63 16 723 690 011 0 0.133 38 2 3/4

75 10 723 690 012 0 0.267 40 Tr108x5
90 10 723 690 013 0 0.389 43 Tr128x5
110 10 723 690 014 0 0.609 48 Tr154x6

PF 2 32 450 999
19
Union bush PVC-C metric
Model:
• Solvent cement socket metric
• For union 723 510 105-114
• Jointing face: With O-Ring groove
d PN Code SP Weight z D L G/Tr
[mm] [bar] [kg] [mm] [mm] [mm] [inch]
16 16 723 840 105 10 0.009 11 24 25 3/4

20 16 723 840 106 10 0.014 12 28 26 1

25 16 723 840 107 10 0.024 11 33 29 1 1/4
32 16 723 840 108 10 0.038 10 41 33 1 1/2
40 16 723 840 109 10 0.066 12 50 39 2
50 16 723 840 110 10 0.083 14 62 46 2 1/4

63 16 723 840 111 10 0.158 19 77 58 2 3/4

75 10 723 840 112 20 0.230 18 93 62 Tr108x5
90 10 723 840 123 12 0.381 18 110 69 Tr128x5
PF 2 32 450 999 110 10 723 840 114 10 0.480 11 133 72 Tr154x6

Union bush PVC-C Rp
Model:
• With parallel female thread Rp
• For union 723 510 105-114
• Jointing face: With O-Ring groove
Rp PN Code SP Weight z D L G
[inch] [bar] [kg] [mm] [mm] [mm] [inch]
∕8 10 723 840 605 10 0.010 13 24 24 3/4

3

1
∕2 10 723 840 606 10 0.015 13 29 26 1
3
∕4 10 723 840 607 10 0.024 14 34 29 1 1/4
1 10 723 840 608 10 0.039 15 42 32 1 1/2
1 1∕4 10 723 840 609 10 0.069 19 53 38 2
1 1∕2 10 723 840 610 10 0.092 26 63 45 2 1/4
2 10 723 840 611 10 0.114 33 78 56 2 3/4

PF 2 32 450 027
Union end PVC-C metric

Model:
• For union 723 510 105-114
• With solvent cement socket metric
d PN Code SP Weight z D D1 L
[mm] [bar] [kg] [mm] [mm] [mm] [mm]
16 16 723 800 105 10 0.005 3 24 22 19

20 16 723 800 106 10 0.010 4 30 28 21

25 16 723 800 107 10 0.018 3 39 36 24
32 16 723 800 108 10 0.023 3 44 41 27
40 16 723 800 109 10 0.062 3 57 53 31
50 16 723 800 110 10 0.064 3 63 59 34

63 16 723 800 111 10 0.120 3 78 74 41

75 10 723 800 162 20 0.157 3 101 91 47
90 10 723 800 163 12 0.260 5 121 108 56
PF 2 32 450 999 110 10 723 800 164 10 0.418 5 146 131 66

20
Union end PVC-C ASTM
Model:
• For union 723 510 105-114
• With solvent cement socket ASTM
Inch PN Code PF SP Weight z D D1 L
[inch] [bar] [kg] [mm] [mm] [mm] [mm]
3/8 16 723 602 005 2 32 450 032 0 0.006 3 24 22 22

1/2 16 723 602 006 2 32 450 032 0 0.013 3 30 28 25

3/4 16 723 602 007 2 32 450 032 0 0.017 3 39 36 28
1 16 723 602 008 2 32 450 032 0 0.024 3 45 42 32
11/4 16 723 602 009 2 32 450 032 0 0.038 3 57 53 35
11/2 16 723 602 010 2 32 450 032 0 0.048 3 63 59 38

2 16 723 602 011 2 32 450 032 0 0.080 3 78 74 41

2 1/2 16 723 602 012 3 101 91 47
3 16 723 602 013 5 121 108 56
4 16 723 602 014 5 146 131 66

Union end malleable iron galvanized R
Model:
• Union End: Malleable iron with taper male thread R
R d Code SP Weight D L D1 z s
[inch] [mm] [kg] [mm] [mm] [mm] [mm] [mm]
∕2 20 724 600 806 200 0.069 30 40 27 25 23

1

3
∕4 25 724 600 807 120 0.115 39 43 36 27 30
1 32 724 600 808 0 0.161 44 48 41 29 36
1 1∕4 40 724 600 809 0 0.294 56 57 52 36 48
1 1∕2 50 724 600 810 0 0.353 62 59 58 37 54
2 63 724 600 811 15 0.570 78 62 73 36 66

2 1∕2 75 724 600 812 0 0.980 100 75 92 45 85

PF 2 30 153 999 3 90 724 600 813 0 1.217 121 80 110 47 95

Union end malleable iron galvanized Rp
Model:
• Union End: malleable iron with parallel female thread Rp
d Rp PN Code SP Weight D L s z D1
[mm] [inch] [bar] [kg] [mm] [mm] [mm] [mm] [mm]
20 ∕2 16 724 600 206 100 0.037 30 22 25 9 27

1

25 3
∕4 16 724 600 207 0 0.072 39 22 31 7 36
32 1 16 724 600 208 120 0.088 44 26 38 9 41
32 1 1∕4 16 724 600 209 0 0.172 56 31 48 12 52
50 1 1∕2 16 724 600 210 1 0.210 62 33 54 14 58
63 2 16 724 600 211 0 0.331 78 35 67 11 73

75 2 1∕2 16 724 600 212 35 0.557 100 39 85 12 92

90 3 16 724 600 213 0 0.650 121 45 96 15 110

PF 2 30 153 999
Union end brass R

Model:
• Union End: Brass with taper male thread R
d R Code SP Weight z D1 D s L
[mm] [inch] [kg] [mm] [mm] [mm] [mm] [mm]
20 ∕2 720 600 246 1 0.092 22 28 30 25 37

1

25 3
∕4 720 600 247 1 0.151 25 36 39 30 42
25 1
∕2 720 600 257 1 0.142 27 36 39 30 42
32 1 720 600 248 1 0.216 28 42 45 36 46
32 1
∕2 720 600 258 1 0.113 31 42 45 36 46
32 ∕4 720 600 268 1 0.206 30 42 45 36 46

3

40 1 1∕4 720 600 249 1 0.408 32 53 56 46 52

50 1 1∕2 720 600 250 1 0.538 36 59 62 55 56
63 2 720 600 251 1 0.859 42 74 78 65 67
75 2 1∕2 720 600 252 1 1.446 49 92 100 85 77
PF 2 30 153 999 90 3 720 600 253 1 2.063 54 110 121 95 86

21
Union end brass Rp
Model:
• Union End: Brass with parallel female thread Rp
Rp d Code SP Weight L s D D1 z
[inch] [mm] [kg] [mm] [mm] [mm] [mm] [mm]
∕2 20 720 600 236 1 0.059 22 25 30 28 5

1

3
∕4 25 720 600 237 1 0.100 25 30 39 36 6
1 32 720 600 238 1 0.128 27 36 45 42 6
1 1∕4 40 720 600 239 1 0.211 31 46 56 53 7
1 1∕2 50 720 600 240 1 0.324 35 55 62 59 7
2 63 720 600 241 1 0.510 40 65 78 74 8

2 1∕2 75 720 600 242 1 0.893 47 85 100 92 10

3 90 720 600 243 1 1.395 52 95 121 110 11
PF 2 30 153 999

Union end stainless steel R

Model:
• Material: Stainless Steel 1.4404 (316L)
• Taper male thread R
R PN Code SP Weight D D1 L s
[inch] [bar] [kg] [mm] [mm] [mm] [mm]
∕8 16 724 600 705 10 0.052 24 22 30 19

3

1
∕2 16 724 600 706 10 0.083 30 28 34 24
3
∕4 16 724 600 707 10 0.125 39 36 36 32
1 16 724 600 708 10 0.189 45 42 40 37
1 1∕4 16 724 600 709 10 0.356 57 53 46 48
1 1∕2 16 724 600 710 10 0.407 63 59 48 54
PF 2 30 153 999 2 16 724 600 711 10 0.668 78 74 55 69

Union end stainless steel Rp
Model:
• Material: Stainless Steel 1.4404 (316L)
• Parallel female thread Rp
Rp PN Code SP Weight z D D1 L s
[inch] [bar] [kg] [mm] [mm] [mm] [mm] [mm]
∕8 16 724 600 655 10 0.030 9 24 22 19 19

3

1
∕2 16 724 600 656 10 0.060 11 30 28 24 24
3
∕4 16 724 600 657 10 0.092 11 39 36 26 29
1 16 724 600 658 10 0.137 12 45 42 29 36
1 1∕4 16 724 600 659 10 0.226 14 57 53 33 45
1 1∕2 16 724 600 660 10 0.314 15 63 59 34 54
2 16 724 600 661 45 0.438 15 78 74 39 63
PF 2 30 153 999

22
Flange adaptors
Flange adaptor PVC-C
Combined jointing face flat and serrated metric
Model:
• Gasket: flat gasket EPDM code no. 748 400 306-320
• Flange: code no. 727 700 406-420, 727 700 206-220, 721 700 006-020
• Gasket: profile flange gasket EPDM code no. 748 440 706-720, FPM code no. 749
440 706-720
Note:
* bevel on pipe may be needed if used with butterfly valve type 037/038/039
d DN PN Code SP Weight z D D1 L L1
[mm] [mm] [bar] [kg] [mm] [mm] [mm] [mm] [mm]
20 15 16 723 790 106 10 0.011 3 27 34 21 6

25 20 16 723 790 107 10 0.018 3 33 41 24 7

32 25 16 723 790 108 10 0.027 3 41 50 27 7
40 32 16 723 790 109 10 0.032 3 50 61 30 8
50 40 16 723 790 110 10 0.054 3 61 73 34 8
63 50 16 723 790 111 10 0.097 3 76 90 41 9

75 65 16 723 790 112 10 0.168 3 91 106 47 10

90 80 16 723 790 113 10 0.265 5 108 125 56 11
110 100 16 723 790 114 10 0.441 5 131 150 66 12
* 160 150 16 723 790 117 12 1.139 5 188 213 91 16
* 200 200 10 723 790 119 2 1.630 6 224 250 112 24
PF 2 32 450 006 225 200 10 723 790 120 2 1.860 6 248 274 125 25

Flange adaptor PVC-C with O-ring groove metric
Model:
• Counterpart: flange adaptor code no. 723 790 117, 723 790 120
• Gasket: O-ring EPDM code no. 748 410 019, 748 410 022; FPM code no. 749 410
019, 749 410 022
• Flange: code no. 727 700 406-420, 727 700 206-220, 721 700 006-020
d PN Code SP Weight z D D1 L L1
[mm] [bar] [kg] [mm] [mm] [mm] [mm] [mm]
160 16 723 810 117 12 1.252 11 188 213 97 22

225 10 723 810 120 2 2.050 12 248 274 131 31

PF 2 32 450 030

23
Backing flanges
Backing flange PP-V
For socket systems metric
¹) Suitable for socket- and butt fusion systems (no pictograph on flange)
* Combined version, metric-ANSI
AL: number of holes
Model:
• UV-resistant. Applicable for outside applications
• With V-groove which applies force evenly on collar
• Connecting dimesnsion: ISO 7005, EN 1092, BS 4504, DIN 2501
• Bolt circle PN 10
• Modern full-plastic flange PP-GF (30 % glass-fibre reinforced)
• With integrated bolt retainers as an assembly aid
d DN PN Code PF SP Weight
[mm] [mm] [bar] [kg]
20 15 16 727 700 406 2 34 238 030 56 0.093

25 20 16 727 700 407 2 34 238 030 38 0.120

32 25 16 727 700 408 2 34 238 030 80 0.151
40 32 16 727 700 409 2 34 238 030 40 0.244
50 40 16 727 700 410 2 34 238 030 30 0.297
63 50 16 727 700 411 2 34 238 030 25 0.362

75 65 16 727 700 412 2 34 238 030 19 0.487

90 80 16 727 700 413 2 34 238 030 15 0.550
110 100 16 727 700 414 2 34 238 030 13 0.640
140 125 16 727 700 416 2 34 238 030 10 0.781
160 150 16 727 700 417 2 34 238 032

* 200 200 16 727 700 419 2 34 238 032

* 225 200 16 727 700 420 2 34 238 032
250 250 16 727 700 421 2 34 238 030 0 2.229

d D D1 D2 D3 H AL SC
[mm] [mm] [mm] [mm] [mm] [mm]
20 95 65 28 14 16 4 M12

25 105 75 34 14 17 4 M12
32 115 85 42 14 18 4 M12
40 140 100 51 18 20 4 M16
50 150 110 62 18 22 4 M16
63 165 125 78 18 24 4 M16

75 185 145 92 18 26 4 M16

90 200 160 110 18 27 8 M16
110 220 180 133 18 28 8 M16
140 250 210 167 18 30 8 M16
160 285 241 190 22 32 8 M20

* 200 340 297 226 22 34 8 M20

* 225 340 297 250 22 34 8 M20
250 395 350 277 22 38 12 M20

24
Backing flange PP-V
For socket systems Inch ANSI
AL: number of holes
* Combined version, metric-ANSI
• 727701414, 727700417, 727700419: only for use with original metric flange adaptors
¹) Suitable for socket- and butt fusion systems (no pictograph on flange)
Model:
• Connecting dimension: ANSI/ASME B 16.5 class 150, ASTM D 4024, BS 1560, BS
EN 1759
• Bolt circle class 150
• Modern full-plastic flange PP-GF (30 % glass-fibre reinforced)
• With V-groove which applies force evenly on collar
• With integrated bolt-fixing as an assembly aid
Size DN d PN Code SP Weight
[inch] [mm] [mm] [bar] [kg]
1 ∕2 15 20 16 727 701 406 56 0.091

1

1 3
∕4 20 25 16 727 701 407 38 0.120
1 1 25 32 16 727 701 408 80 0.147
1 1 1∕4 32 40 16 727 701 409 40 0.246
1 1 1∕2 40 50 16 727 701 410 30 0.299
1 2 50 63 16 727 701 411 25 0.361

1 2 1∕2 65 75 16 727 701 412 19 0.492

3 80 90 16 727 701 413 14 0.605
4 100 110 16 727 701 414 12 0.704
6 150 160 16 727 700 417
* 8 200 200 16 727 700 419
* 8 200 225 16 727 700 420

D D1 D2 D3 H AL SC
[mm] [mm] [mm] [mm] [mm]
1 95 60 28 16 16 4 M12

1 105 70 34 16 17 4 M12
1 115 79 42 16 18 4 M12
1 140 89 51 16 20 4 M16
1 150 98 62 16 22 4 M16
1 165 121 78 19 24 4 M16

1 185 140 92 19 26 4 M16

200 152 110 19 27 4 M16
229 190 133 19 28 8 M16
285 241 190 22 32 8 M20
* 340 297 226 22 34 8 M20
PF 2 34 238 032 * 340 297 250 22 34 8 M20

25
Backing Flange PP-Steel
for Socket Systems Inch/ANSI
• 727701214, 727700217: only for use with original metric flange adaptors
AL: number of holes
Model:
• For Flange Adaptors BS/ANSI
• Material: PP (30% glass-fibre reinforced) with steel ring
• Connecting dimension: ANSI/ASME B 16.5 class 150, ASTM D 4024, BS 1560, BS
EN 1759
• Bolt circle class 150
d d Code Weight D1 D2 D3 D H AL SC
[inch] [mm] [lb] [mm] [mm] [mm] [mm] [mm]
∕2 20 727 701 206 0.470 60 28 16 95 12 4 M12

1

3
∕4 25 727 701 207 0.573 70 34 16 105 12 4 M12
1 32 727 701 208 0.917 79 42 16 115 16 4 M12
1 1∕4 40 727 701 209 1.609 89 51 16 140 16 4 M16
1 1∕2 50 727 701 210 1.784 98 62 16 150 18 4 M16
2 63 727 701 211 1.909 121 78 19 165 18 4 M16

2 1∕2 75 727 701 212 2.463 140 92 19 185 18 4 M16

3 90 727 701 213 3.289 152 110 19 200 20 4 M16
4 110 727 701 214 3.737 190 133 19 229 20 8 M16
6 160 727 700 217 240 190 22 285 24 8 M20
PF 2 34 238 021 8 225 727 701 220 9.861 298 250 22 340 27 8 M20

26
Seals
Flat gasket
Flat gasket
Model:
• For all metric GF Flange Adaptors
• Integrated fixation aids from d110
• Centering on the inner diameter of the screw crown
di FA are the suitable inner diameters of flanges adaptors

d DN PN Type EPDM SP Weight
[mm] [mm] [bar] Code [kg]
16 10 10 A 748 400 305 0 0.004

20 15 10 A 748 400 306 0 0.012

25 20 10 A 748 400 307 0 0.004
32 25 10 A 748 400 308 0 0.008
40 32 10 A 748 400 309 0 0.013
50 40 10 A 748 400 310 0 0.016

63 50 10 A 748 400 311 0 0.018

75 65 10 A 748 400 312 0 0.029
90 80 10 A 748 400 313 0 0.035
110 100 10 B 748 400 314 0 0.051
125 100 10 B 748 400 315 0 0.044

140 125 10 B 748 400 316 0 0.068

160 ‐ 180 150 10 B 748 400 317 0 0.090
200 200 6 C 748 400 319 0 0.210
225 200 6 C 748 400 320 0 0.140

d DN D D1 D2 D3 H di FA
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
16 10 46 16 2 6 ‐ 26

20 15 51 20 2 10 ‐ 30
25 20 61 25 2 15 ‐ 35
32 25 71 32 2 22 ‐ 42
40 32 82 40 3 30 ‐ 50
50 40 92 50 3 40 ‐ 60

63 50 107 63 3 53 ‐ 73
75 65 127 71 3 61 ‐ 81
90 80 142 84 3 74 ‐ 94
110 100 162 104 180 18 4 94 ‐ 114
125 100 162 119 180 18 4 109 ‐ 129

140 125 192 134 210 18 4 124 ‐ 144

160 ‐ 180 150 218 155 241 22 4 145 ‐ 165
200 200 273 195 295 22 5 185 ‐ 205
PF 2 30 162 003 225 200 273 216 295 22 5 206 ‐ 226

27
Profiled gasket
Profile Flange Gasket, metric
EPDM / FPM
Model:
• For all metric GF Flange Adaptors
• Profile Gasket with steel insert (type G-ST-P/K)
• Hardness: 70° Shore EPDM, 75° Shore FPM
• EPDM: approved acc. to DVGW W 270, KTW recommendation
• Centering on the inner diameter of the screw crown
• material steel insert: carbon steel
di FA are the suitable inner diameters of flanges adaptors

d PN DN EPDM FPM Weight D D1 H H1 di FA
[mm] [bar] [mm] Code Code [kg] [mm] [mm] [mm] [mm] [mm]
16 16 10 748 440 705 749 440 705 0.012 46 16 4 3 6 ‐ 16

20 16 15 748 440 706 749 440 706 0.013 51 20 4 3 10 ‐ 20

25 16 20 748 440 707 749 440 707 0.014 61 22 4 3 12 ‐ 22
32 16 25 748 440 708 749 440 708 0.019 71 28 4 3 18 ‐ 28
40 16 32 748 440 709 749 440 709 0.026 82 40 4 3 30 ‐ 40
50 16 40 748 440 710 749 440 710 0.039 92 46 4 3 36 ‐ 46

63 16 50 748 440 711 749 440 711 0.050 107 58 5 4 48 ‐ 58

75 16 65 748 440 712 749 440 712 0.082 127 69 5 4 59 ‐ 69
90 16 80 748 440 713 749 440 713 0.083 142 84 5 4 73 ‐ 84
110 16 100 748 440 714 749 440 714 0.127 162 104 6 5 94 ‐ 104
125 16 100 748 440 715 749 440 715 0.105 162 123 6 5 113 ‐ 123

140 16 125 748 440 716 749 440 716 0.173 192 137 6 5 127 ‐ 137
160 ‐ 180 16 150 748 440 717 749 440 717 0.207 218 160 8 6 150 ‐ 160
200 16 200 748 440 719 749 440 719 0.263 273 203 8 6 192 ‐ 203
PF 2 30 162 037 225 16 200 748 440 720 749 440 720 0.255 273 220 8 6 207 ‐ 220

O-Ring gasket
Model:
• For Flange Adaptors
d DN EPDM SP Weight FPM SP Weight
[mm] [mm] Code [kg] Code [kg]
160 150 748 410 019 200 0.025 749 410 019 200 0.044

225 200 748 410 022 100 0.034 749 410 022 150 0.060

d D D1 D2 closest
[mm] [mm] [mm] [mm] inch
[inch]
160 191 177 6.99 6

PF 2 31 800 999 225 255 241 6.99 8

28
Pipe clips metric
KLIP-IT pipe clip type 061 PP metric
Model:
• Material: Clip and safety clip PP black, UV resistant, bolts galvanized
• d16 - d63: Height designed for Ball Valve Type 546 and 543
• Minimum order quantity: standard packagings SP
d d Code SP Weight
[inch] [mm] [kg]
* 10 167 061 003 10 0.003

* 12 167 061 004 10 0.003

* 16 167 061 035 1 0.007
20 167 061 036 1 0.007
25 167 061 037 10 0.009
* 32 167 061 038 10 0.012

40 167 061 039 10 0.027

50 167 061 040 10 0.031
63 167 061 041 10 0.052
2 1∕2 75 167 061 012 10 0.057
3 90 167 061 013 10 0.092

4 110 167 061 014 10 0.117

125 167 061 015 10 0.180
5 140 167 061 016 10 0.224
160 167 061 017 10 0.242

H1 H3 closest D1 HoH +/- L1 D H L2 H2 SC
[mm] [mm] inch [mm] 2mm [mm] [mm] [mm] [mm] [mm]
[inch] [mm]
* 10 12 ∕8 8 11 5 20 14 6 M4

1

* 10 12 ∕4
1
8 11 5 21 14 6 M5
* 10 16 3
∕8 11 17 14 6 27 17 6 M5
10 16 1
∕2 11 21 17 6 27 19 6 M5
10 16 3
∕4 11 27 19 6 30 22 6 M5
* 10 16 1 11 37 24 6 36 27 6 M5

10 22 1 1∕4 14 44 34 7 44 34 7 M6
10 22 1 1∕2 14 52 37 7 51 37 7 M6
10 25 2 17 67 45 9 64 45 10 M8
10 25 2 1∕2 17 52 9 58 52 10 M8
10 28 3 17 65 9 65 65 10 M8

10 28 4 17 79 9 75 79 10 M8
10 32 17 88 9 90 88 10 M8
10 32 5 17 98 9 110 98 10 M8
PF 2 30 162 023 10 32 6 17 109 9 108 109 10 M8

KLIP-IT spacer type 061 PP
Model:
• For pipe clips Type 061/061H, PP black, UV resistant
• Minimum order quantity: standard packaging SP
Inch d Code SP Weight
[inch] [mm] [kg]
∕8 ‐ ∕4 10 ‐ 12 167 061 153 10 0.003

1 1

3
∕8 16 167 061 155 10 0.005
1
∕2 20 167 061 156 10 0.005
3
∕4 25 167 061 157 10 0.007
1 32 167 061 158 10 0.006
1 1∕4 40 167 061 159 10 0.015

1 1∕2 50 167 061 160 10 0.017

2 63 167 061 161 10 0.020
2 1∕2 75 167 061 162 10 0.027
3 90 167 061 163 10 0.039
4 110 167 061 164 10 0.048

4 1∕2 125 167 061 165 10 0.059

5 140 167 061 166 10 0.065
6 160 167 061 167 10 0.071

table comtinued next page
29
HoH +/- 2mm D L1 L2 H H1 H2 SC
[mm] [mm] [mm] [mm] [mm] [mm] [mm]
1.0 5 11 14 20 10 12 M4

17.0 6 14 17 20 10 16 M5
21.4 6 17 19 20 10 16 M5
26.9 6 19 22 20 10 16 M5
36.7 6 24 27 20 10 16 M5
44.4 7 34 34 20 10 22 M6

52.3 7 37 37 20 10 22 M6
66.7 9 45 45 20 10 25 M8
81.2 9 52 52 20 10 25 M8
100.0 9 65 65 20 10 28 M8
127.3 9 79 79 20 10 28 M8

142.9 9 88 88 20 10 32 M8
161.4 9 98 98 20 10 32 M8
PF 2 30 162 023 185.1 9 109 109 20 10 32 M8

KLIP-IT pipe clip type 061 PE metric
• Height not designed for ball valve 546 and 543. Please use spacer 73 06 11.
Model:
• Material: Clip PE and safety clip PP black, bolts galvanized
d Code SP Weight
[mm] [kg]
* 10 173 061 003 10 0.003

* 12 173 061 004 10 0.006

* 16 173 061 005 10 0.006
* 20 173 061 006 10 0.007
* 25 173 061 007 10 0.009
* 32 173 061 008 10 0.011

40 173 061 009 10 0.026

50 173 061 010 10 0.028
63 173 061 011 10 0.047
75 173 061 012 10 0.061
90 173 061 013 10 0.098

110 173 061 014 10 0.125

125 173 061 015 10 0.194
140 173 061 016 10 0.243
160 173 061 017 10 0.254

HoH +/- 2mm D1 D L1 L2 H H1 H2 H3 SC
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
* 1 8 5 11 14 20 10 6 12 M4

* 1 8 5 11 14 21 10 6 12 M5
* 17 11 6 14 17 23 10 6 16 M5
* 21 11 6 17 19 25 10 6 16 M5
* 27 11 6 19 22 28 10 6 16 M5
* 37 11 6 24 27 31 10 6 16 M5

44 14 7 34 34 35 10 7 22 M6
52 14 7 37 37 40 10 7 22 M6
67 17 9 45 45 52 10 10 25 M8
81 17 9 52 52 58 10 10 25 M8
100 17 9 65 65 65 10 10 28 M8

127 17 9 79 79 75 10 10 28 M8
143 17 9 88 88 90 10 10 32 M8
161 17 9 98 98 110 10 10 32 M8
PF 2 30 162 026 185 17 9 109 109 108 10 10 32 M8

30
KLIP-IT spacer type 061 PE
Model:
• For pipe clips Type 061, PE black, UV resistant
d Inch Code SP Weight
[mm] [inch] [kg]
1/8-1/4 173 061 153 10 0.003

16 3/8 173 061 155 10 0.005

20 1/2 173 061 156 10 0.005
25 3/4 173 061 157 10 0.006
32 1 173 061 158 10 0.008
40 11/4 173 061 159 10 0.016

50 11/2 173 061 160 10 0.017

63 2 173 061 161 10 0.025
75 21/2 173 061 162 10 0.027
90 3 173 061 163 10 0.040
110 4 173 061 164 10 0.050

125 41/2 173 061 165 10 0.059

140 5 173 061 166 10 0.065
160 6 173 061 167 10 0.078

HoH +/- D L1 L2 H H1 H2 SC
2mm [mm] [mm] [mm] [mm] [mm] [mm]
[mm]
17 5 11 14 20 10 12 M4

21 6 14 17 20 10 16 M5
27 6 17 19 20 10 16 M5
37 6 19 22 20 10 16 M5
44 6 24 27 20 10 16 M5
52 7 34 34 20 10 22 M6

67 7 37 37 20 10 22 M6
81 9 45 45 20 10 25 M8
100 9 52 52 20 10 25 M8
127 9 65 65 20 10 28 M8
143 9 79 79 20 10 28 M8

9 88 88 20 10 32 M8
185 9 98 98 20 10 32 M8
PF 2 30 162 026 9 109 109 20 10 32 M8

Pipe clip type 060 PP metric
Model:
• Minimum order quantity: standard packaging SP or gross packaging GP
• Accidental opening of the safety clip is not possible
• Clip and safety clip are not assembled in the packaging.
• Pipes with flanges can be installed directly
d d Code SP Weight closest D L L1 H H1 H2 SC
[inch] [mm] [kg] inch [mm] [mm] [mm] [mm] [mm] [mm]
[inch]
3 90 167 060 038 10 0.144 3 9 89 71 105 15 33 M8

110 167 060 039 10 0.158 4 9 94 80 115 15 33 M8

125 167 060 040 10 0.249 11 116 91 130 20 35 M10
5 140 167 060 041 10 0.260 5 11 121 98 130 20 35 M10
160 167 060 042 10 0.296 6 11 131 107 148 20 35 M10
180 167 060 043 10 0.327 7 11 143 115 163 20 35 M10

200 167 060 019 5 0.539 8 13 152 120 175 25 39 M12

225 167 060 020 5 0.178 8 13 165 132 175 25 39 M12
250 167 060 021 5 0.657 9 13 183 143 200 25 39 M12
280 167 060 022 5 0.212 10 13 198 156 200 25 39 M12
315 167 060 023 5 0.805 12 13 219 172 225 25 39 M12

355 167 060 024 5 1.251 14 17 275 209 258 30 50 M16

PF 2 30 162 023 400 167 060 025 4 1.031 16 17 300 228 288 30 50 M16

31
KLIP-IT pipe clip type 061H PP metric
• * d16 to d32 without bracket
• d16 - d63: height designed for Ball Valve Type 546 und 543
Model:
• Minimum order quantity: standard packagings SP
d Code SP Weight
[mm] [kg]
* 16 167 061 035 1 0.007

20 167 061 036 1 0.007

25 167 061 037 10 0.009
* 32 167 061 038 10 0.012
40 167 061 039 10 0.027
50 167 061 040 10 0.031
63 167 061 041 10 0.052

d HoH +/- 2mm closest D1 D L1 L2 H H1 H2 H3 SC
[mm] [mm] inch [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
[inch]
* 16 17 ∕8 11 6 14 17 27 10 6 16 M5

3

20 21 1
∕2 11 6 17 19 27 10 6 16 M5
25 27 3
∕4 11 6 19 22 30 10 6 16 M5
* 32 37 1 11 6 24 27 36 10 6 16 M5
40 44 1 1∕4 14 7 34 34 44 10 7 22 M6
50 52 1 1∕2 14 7 37 37 51 10 7 22 M6
PF 2 30 162 023 63 67 2 17 9 45 45 64 10 10 25 M8

32
PVC-C accessories
Tangit solvent cement for PVC-C
Code Weight
[kg]
799 298 027 0.700

PF 2 28 473 006
Tangit Dytex special solvent cement

Model:
• Special solvent cement, transparent.
• For concentrated acids and strong oxidizing agents the use of Dytex is recommended
• 1.350 kg (net) tin
Code Weight
[kg]
PF 2 28 473 003 799 298 016 0.668

Cap for cement
Model:
• Cap prevents the evaporation of the solvent whilst using the Tangit cement
• Tangit cement
Code Weight
[kg]
799 298 028 0.030

PF 2 28 473 009
Tangit cleaner
Model:
• 1 litre tin
Code Weight
[kg]
799 298 010 0.868

PF 2 28 473 002
Round brush
Code Weight
[kg]
799 299 001 0.004

PF 2 30 217 004 799 299 002 0.006

33
Flat brush
Code Weight
[kg]
799 299 003 0.015

799 299 004 0.035

PF 2 30 217 005 799 299 005 0.053

PPC Plastic pipe cutter
• For cutting plastic pipes d10 - d160
Article d-d Code SP Weight Closest
[mm] [kg] inch
[inch]
PPC 63, s max. = 7.2mm 10 ‐ 63 790 109 001 1 0.865 ∕8 ‐ 2

1
PPC 110, s max. = 12.7mm 50 ‐ 110 790 109 002 1 1.624 1 ∕2 ‐ 4

1
PF 3 25 117 309 PPC 160, s max. = 19.0mm 110 ‐ 160 790 109 003 1 2.212 4‐6

Replacement cutting wheels
• for plastic pipe cutter
d-d Article Code SP Weight
[mm] [kg]
10 ‐ 63 SR 63 max. s=7,2 mm 790 109 011 50 0.004

50 ‐ 110 SR 110/160 max. s=12,7 mm 790 109 012 50 0.015

PF 3 25 117 909 110 ‐ 160 SR 160 max. s=19,0 mm 790 109 013 30 0.023

Alignment Tool
• To align and position pipes in the dimension range d 110 - 400 mm. The pipes are
clamped in the vice, the axial movement takes placed by a chain drive. The chain is
totated by the ratched (square 19 mm).
Article Code SP Weight
[kg]
Alignment Tool 790 109 108 0 15.000

PF 3 25 117 325 Ratch 790 109 107 0 1.220

Chamfering tool
d-d Size Code SP Weight Closest
[mm] [mm] [kg] inch
[inch]
16 ‐ 75 1 799 495 145 0 0.720 ∕8 ‐ 2 1∕2

3
32 ‐ 200 2 799 495 146 0 0.992 1‐8

PF 2 35 268 001

Marker
Type Code Weight
[kg]
silver 799 350 364 0.010

PF 2 55 338 999

Timer with 2 stop times

Code SP Weight
[kg]
790 114 028 1 0.088

PF 3 25 117 316

34
Notes
35
36
PVC-C Valves
Page
Ball valves 38
Diaphragm valves new generation 58
Diaphragm valves 60
Butterfly valves 61
Cone check valves 67
Process control valves 71
Pressure regulating valves 72
Strainers 77
Ball valves electric 80
Ball valves pneumatic 106
Diaphragm valves pneumaticNew generation 135
Diaphragm valves pneumatic 150
Butterfly valves electric 153
Butterfly valves pneumatic 161
37
Ball valves
546
Ball valve type 546 PVC-C
With mounting inserts
With solvent cement sockets metric
Model:
• For easy installation and removal
• Ball seals PTFE
• Integrated stainless steel mounting inserts
• z-dimension, valve end and union nut are not compatible with type 346
(DN10/15-50) resp. type 370 (DN65-100)
Option:
• Individual configuration of the valve (see diagram)
• Multifunctional module with integrated limit switches
• Pneumatic or electric actuators from +GF+
d DN PN kv-val- EPDM SP Weight FPM SP Weight
[mm] [mm] [bar] ue (Δp=1 Code [kg] Code [kg]
bar)
[l ⁄ min]
16 10 16 71 163 546 061 1 0.160 163 546 071 1 0.160

20 15 16 185 163 546 062 1 0.169 163 546 072 1 0.160

25 20 16 350 163 546 063 1 0.255 163 546 073 1 0.245
32 25 16 700 163 546 064 1 0.370 163 546 074 1 0.373
40 32 16 1000 163 546 065 1 0.648 163 546 075 1 0.658
50 40 16 1600 163 546 066 1 0.894 163 546 076 1 0.890

63 50 16 3100 163 546 067 1 1.653 163 546 077 1 1.662

75 65 16 5000 163 546 068 1 3.552 163 546 078 1 4.122
90 80 16 7000 163 546 069 1 6.646 163 546 079 1 6.698
110 100 16 11000 163 546 070 1 9.697 163 546 080 1 12.700

d D H H1 H2 L L1 L2 L4 L5 L6 M z closest
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] inch
[inch]
16 50 57 27 12 92 77 56 25 32 45 M6 64 ∕8

3
20 50 57 27 12 95 77 56 25 32 45 M6 64 1
∕2
25 58 67 30 12 110 97 65 25 39 58 M6 72 3
∕4
32 68 73 36 12 123 97 71 25 39 58 M6 79 1
40 84 90 44 15 146 128 85 45 54 74 M8 94 1 1∕4
50 97 97 51 15 157 128 89 45 54 74 M8 95 1 1∕2

63 124 116 64 15 183 152 101 45 66 87 M8 107 2

75 166 149 85 15 233 270 136 70 64 206 M8 144 2 1∕2
90 200 161 105 15 254 270 141 70 64 206 M8 151 3
110 238 178 123 22 301 320 164 120 64 256 M12 174 4

PF 2 32 541 801

38
With lockable handle
Model:
• Ball seals PTFE
(DN10/15-50) resp. type 370 (DN65-100)
• Lockable hand lever with ratchet settings
Option:
bar)
[l ⁄ min]
16 10 16 71 163 546 081 1 0.175 163 546 091 1 0.175

20 15 16 185 163 546 082 1 0.175 163 546 092 1 0.175

25 20 16 350 163 546 083 1 0.270 163 546 093 1 0.270
32 25 16 700 163 546 084 1 0.390 163 546 094 1 0.390
40 32 16 1000 163 546 085 1 0.700 163 546 095 1 0.700
50 40 16 1600 163 546 086 1 0.930 163 546 096 1 0.930

63 50 16 3100 163 546 087 1 1.695 163 546 097 1 1.695

75 65 16 5000 163 546 088 1 4.900 163 546 098 1 4.900
90 80 16 7000 163 546 089 1 6.647 163 546 099 1 7.400
110 100 16 11000 163 546 090 1 11.600 163 546 100 1 0.000

d D H H1 H2 L L1 L2 L4 L5 L6 M z closest
[inch]
16 50 79 27 12 92 87 56 25 42 45 M6 64 ∕8

3
20 50 79 27 12 95 87 56 25 42 45 M6 64 1
∕2
25 58 88 30 12 110 108 65 25 50 58 M6 72 3
∕4
32 68 94 36 12 123 108 71 25 50 58 M6 79 1
40 84 113 44 15 146 140 85 45 66 75 M8 94 1 1∕4
50 97 119 51 15 157 140 89 45 66 75 M8 95 1 1∕2

63 124 141 64 15 183 165 101 45 78 87 M8 107 2

75 166 224 85 15 233 270 136 70 64 206 M8 144 2 1∕2
90 200 235 105 15 254 270 141 70 64 206 M8 151 3
110 238 245 123 22 301 320 164 120 64 256 M12 174 4

PF 2 32 541 801

39
With solvent cement spigots metric
Model:
• Ball seals PTFE
(DN10/15-50) resp. type 370 (DN65-100)
Option:
bar)
[l ⁄ min]
16 10 16 71 163 546 381 1 0.162 163 546 391 1 0.162

20 15 16 185 163 546 382 1 0.162 163 546 392 1 0.162

25 20 16 350 163 546 383 1 0.247 163 546 393 1 0.247
32 25 16 700 163 546 384 1 0.367 163 546 394 1 0.367
40 32 16 1000 163 546 385 1 0.665 163 546 395 1 0.665
50 40 16 1600 163 546 386 1 0.895 163 546 396 1 0.895

63 50 16 3100 163 546 387 1 1.655 163 546 397 1 1.655

75 65 16 5000 163 546 388 1 5.500 163 546 398 1 5.500
90 80 16 7000 163 546 389 1 8.200 163 546 399 1 8.200
110 100 16 11000 163 546 390 1 12.900 163 546 400 1 12.900

d D H H1 H2 L L1 L2 L3 L4 L5 L6 M closest
[inch]
16 50 57 27 12 114 77 56 25 32 45 M6 ∕8

3
20 50 57 27 12 124 77 56 130 25 32 45 M6 1
∕2
25 58 67 30 12 144 97 65 150 25 39 58 M6 3
∕4
32 68 73 36 12 154 97 71 160 25 39 58 M6 1
40 84 90 44 15 174 128 85 180 45 54 74 M8 1 1∕4
50 97 97 51 15 194 128 89 200 45 54 74 M8 1 1∕2

63 124 116 64 15 224 152 101 230 45 66 87 M8 2

75 166 149 85 15 284 270 136 290 70 64 206 M8 2 1∕2
90 200 161 105 15 300 270 141 310 70 64 206 M8 3
110 238 178 123 22 340 320 164 350 120 64 256 M12 4

PF 2 32 541 801

40
With backing flanges PP-st metric
Model:
• Ball seals PTFE
(DN10/15-50) resp. type 370 (DN65-100)
• Overall length according to EN 558
Option:
bar)
[l ⁄ min]
75 65 16 5000 163 546 108 1 6.000 163 546 118 1 6.546

90 80 16 7000 163 546 109 1 9.501 163 546 119 1 9.320

110 100 16 11000 163 546 110 1 14.200 163 546 120 1 14.200

d D D1 D3 H H1 L L1 L2 L3 L4 L5 L6 M
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
75 166 145 18 149 85 284 270 136 290 70 64 206 8

90 200 160 18 161 105 300 270 141 310 70 64 206 8

PF 2 32 541 801 110 238 180 18 178 123 340 320 164 350 120 64 256 12

41
With threaded sockets Rp
Model:
• Ball seals PTFE
(DN10/15-50) resp. type 370 (DN65-100)
Option:
Rp DN PN kv-val- EPDM SP Weight FPM SP Weight
[inch] [mm] [bar] ue (Δp=1 Code [kg] Code [kg]
bar)
[l ⁄ min]
∕8 10 10 71 163 546 401 1 0.162 163 546 411 1 0.162

3

1
∕2 15 10 185 163 546 402 1 0.162 163 546 412 1 0.162
3
∕4 20 10 350 163 546 403 1 0.247 163 546 413 1 0.247
1 25 10 700 163 546 404 1 0.367 163 546 414 1 0.367
1 1∕4 32 10 1000 163 546 405 1 0.665 163 546 415 1 0.665
1 1∕2 40 10 1600 163 546 406 1 0.895 163 546 416 1 0.895

2 50 10 3100 163 546 407 1 1.655 163 546 417 1 1.655

2 1∕2 65 10 5000 163 546 408 1 5.400 163 546 418 1 5.400
3 80 10 7000 163 546 409 1 8.100 163 546 419 1 8.100
4 100 10 11000 163 546 410 1 12.700 163 546 420 1 12.700

Rp D H H1 H2 L L1 L2 L4 L5 L6 M z
[inch] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
∕8 50 57 27 12 95 77 56 25 32 45 M6 69

3

1
∕2 50 57 27 12 100 77 56 25 32 45 M6 67
3
∕4 58 67 30 12 114 97 65 25 39 58 M6 78
1 68 73 36 12 127 97 71 25 39 58 M6 85
1 1∕4 84 90 44 12 146 128 85 45 54 74 M8 100
1 1∕2 97 97 51 15 152 128 89 45 54 74 M8 106

2 124 116 64 15 177 152 101 45 66 87 M8 121

2 1∕2 166 149 85 15 233 270 136 70 64 206 M8 144
3 200 161 105 15 254 270 141 70 64 206 M8 151
4 238 178 123 22 301 320 164 120 64 256 M12 174

PF 2 32 541 801

42
With solvent cement sockets Inch ASTM
Including 2 threaded union ends NPT
Model:
• Ball seals PTFE
• Threaded valve ends are only enclosed for DN10/15-50
(DN10/15-50) resp. type 370 (DN65-100)
Option:
Size DN PN kv-val- EPDM SP Weight FPM SP Weight
bar)
[l ⁄ min]
∕8 10 16 71 163 546 341 1 0.194 163 546 351 1 0.194

3

1
∕2 15 16 185 163 546 342 1 0.248 163 546 352 1 0.250
3
∕4 20 16 350 163 546 343 1 0.358 163 546 353 1 0.267
1 25 16 700 163 546 344 1 0.517 163 546 354 1 0.520
1 1∕4 32 16 1000 163 546 345 1 0.652 163 546 355 1 0.810
1 1∕2 40 16 1600 163 546 346 1 1.166 163 546 356 1 1.180

2 50 16 3100 163 546 347 1 2.055 163 546 357 1 2.078

2 1∕2 65 16 5000 163 546 348 1 5.400 163 546 358 1 5.400
3 80 16 7000 163 546 349 1 5.821 163 546 359 1 6.689
4 100 16 11000 163 546 350 1 12.800 163 546 360 1 12.800

Size D H H1 L L1 L2 L4 L5 L6 M z
[inch] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
∕8 50 57 27 105 77 56 25 32 45 M6 67

3

1
∕2 50 57 27 105 77 56 25 32 45 M6 61
3
∕4 58 67 30 121 97 65 25 39 58 M6 70
1 68 73 36 133 97 71 25 39 58 M6 76
1 1∕4 84 90 44 154 128 85 45 54 74 M8 90
1 1∕2 97 97 51 164 128 89 45 54 74 M8 94

2 124 116 64 183 152 101 45 66 87 M8 107

2 1∕2 166 149 85 233 270 136 70 64 206 M8 144
3 200 161 105 254 270 141 70 64 206 M8 151
4 238 178 123 301 320 164 120 64 256 M12 174

PF 2 32 541 803

43
With backing flanges PP-st Inch ANSI
Model:
• Ball seals PTFE
(DN10/15-50) resp. type 370 (DN65-100)
• Connecting dimension ANSI/ASME B 16.5 / ASTM D 4024
Option:
bar)
[l ⁄ min]
2 ∕2 65 16 5000 163 546 168 1 6.000 163 546 178 1 6.000

1

3 80 16 7000 163 546 169 1 9.100 163 546 179 1 9.100

4 100 16 11000 163 546 170 1 14.200 163 546 180 1 14.200

Size D D1 D3 H H1 L L1 L2 L3 L4 L5 L6 M
[inch] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
2 1∕2 166 140 19 149 85 284 270 136 290 70 64 206 8

3 200 152 19 161 105 300 270 141 310 70 64 206 8

PF 2 32 541 803 4 238 191 19 178 123 340 320 164 350 120 64 256 12

44
543
3-Way ball valve type 543 PVC-C
Horizontal/T-port
Model:
• For easy installation and removal (valve end and union nut are compatible with type
546)
• Ball seals PTFE
• Pneumatic or electric actuator available separately
• Angle of operation 360° without turn limiter
• Turn limiter 90° enclosed, in different positions usable as a clip-on ring
• Delivery status A-B-C opened, see flow scheme
bar)
[l ⁄ min]
16 10 10 140 163 543 201 1 0.264 163 543 211 1 0.264

20 15 10 200 163 543 202 1 0.271 163 543 212 1 0.271

25 20 10 470 163 543 203 1 0.389 163 543 213 1 0.389
32 25 10 793 163 543 204 1 0.561 163 543 214 1 0.590
40 32 10 1290 163 543 205 1 1.007 163 543 215 1 1.007
50 40 10 1910 163 543 206 1 1.487 163 543 216 1 1.487
63 50 10 3100 163 543 207 1 2.889 163 543 217 1 2.889

d D H H1 H2 L L1 L2 L3 L4 L5 L6 M z z1
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
16 50 57 28 8 109 77 73 36 25 32 45 6 81 40

20 50 57 28 8 112 77 73 36 25 32 45 6 81 40
25 58 67 32 8 131 97 86 43 25 39 58 6 94 47
32 68 73 36 8 151 97 99 50 25 39 58 6 107 54
40 84 90 45 9 181 128 120 60 45 54 74 8 130 65
50 97 97 51 9 205 128 137 69 45 54 74 8 143 72
63 124 116 65 9 261 152 179 89 45 66 87 8 185 92

d closest
[mm] inch
[inch]
16 ∕8

3
20 1
∕2
25 3
∕4
32 1
40 1 1∕4
50 1 1∕2
63 2

PF 2 32 002 801

45
Horizontal/T-port
Model:
546)
• Ball seals PTFE
• Multifunctional lever red with ratched setting 45°, lockable
bar)
[l ⁄ min]
16 10 10 140 163 543 401 1 0.280 163 543 411 1 0.280

20 15 10 200 163 543 402 1 0.286 163 543 412 1 0.286

25 20 10 470 163 543 403 1 0.408 163 543 413 1 0.408
32 25 10 793 163 543 404 1 0.609 163 543 414 1 0.609
40 32 10 1290 163 543 405 1 1.031 163 543 415 1 1.031
50 40 10 1910 163 543 406 1 1.512 163 543 416 1 1.512
63 50 10 3100 163 543 407 1 2.923 163 543 417 1 2.923

16 50 79 28 8 109 87 73 36 25 42 45 6 81 40

20 50 79 28 8 112 87 73 36 25 42 45 6 81 40
25 58 88 32 8 131 108 86 43 25 50 58 6 94 47
32 68 94 36 8 151 108 99 50 25 50 58 6 107 54
40 84 113 45 9 181 141 120 60 45 66 75 8 130 65
50 97 119 51 9 205 141 137 69 45 66 75 8 143 72
63 124 141 65 9 261 165 179 89 45 78 87 8 185 92

d closest
[mm] inch
[inch]
16 ∕8

3
20 1
∕2
25 3
∕4
32 1
40 1 1∕4
50 1 1∕2
63 2

PF 2 32 002 801

46
Horizontal/T-port
Model:
546)
• Ball seals PTFE
bar)
[l ⁄ min]
16 10 10 140 163 543 221 1 0.264 163 543 231 1 0.264

20 15 10 200 163 543 222 1 0.271 163 543 232 1 0.271

25 20 10 470 163 543 223 1 0.389 163 543 233 1 0.389
32 25 10 793 163 543 224 1 0.590 163 543 234 1 0.590
40 32 10 1290 163 543 225 1 1.007 163 543 235 1 1.007
50 40 10 1910 163 543 226 1 1.487 163 543 236 1 1.487
63 50 10 3100 163 543 227 1 2.889 163 543 237 1 2.889

d D H H1 H2 L L1 L2 L3 L4 L5 L6 L7 M closest
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] inch
[inch]
16 50 57 28 8 131 77 73 36 25 32 45 137 6 ∕8

3
20 50 57 28 8 141 77 73 36 25 32 45 147 6 1
∕2
25 58 67 32 8 165 97 86 43 25 39 58 171 6 3
∕4
32 68 73 36 8 182 97 99 50 25 39 58 188 6 1
40 84 90 45 9 209 128 120 60 45 54 74 215 8 1 1∕4
50 97 97 51 9 242 128 137 69 45 54 74 248 8 1 1∕2
63 124 116 65 9 302 152 179 89 45 66 87 308 8 2

PF 2 32 002 801

47
Horizontal/T-port
Model:
546)
• Ball seals PTFE
bar)
[l ⁄ min]
∕8 10 10 140 163 543 241 1 0.264 163 543 251 1 0.264

3

1
∕2 15 10 200 163 543 242 1 0.271 163 543 252 1 0.271
3
∕4 20 10 470 163 543 243 1 0.389 163 543 253 1 0.389
1 25 10 793 163 543 244 1 0.590 163 543 254 1 0.590
1 1∕4 32 10 1290 163 543 245 1 1.007 163 543 255 1 1.007
1 1∕2 40 10 1910 163 543 246 1 1.487 163 543 256 1 1.487
2 50 10 3100 163 543 247 1 2.889 163 543 257 1 2.889

Rp D H H1 H2 L L1 L2 L3 L4 L5 L6 M z z1
[inch] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
∕8 50 57 28 8 113 77 73 36 25 32 45 6 87 43

3

1
∕2 50 57 28 8 116 77 73 36 25 32 45 6 85 42
3
∕4 58 67 32 8 135 97 86 43 25 39 58 6 100 50
1 68 73 36 8 155 97 99 50 25 39 58 6 113 57
1 1∕4 84 90 45 9 179 128 120 60 45 54 74 8 134 67
1 1∕2 97 97 51 9 201 128 137 69 45 54 74 8 155 78
2 124 116 65 9 255 152 179 89 45 66 87 8 199 99

PF 2 32 002 801

48
Horizontal/T-port
With threaded sockets NPT
Model:
546)
• Ball seals PTFE
NPT DN PN kv-val- EPDM SP Weight FPM SP Weight
bar)
[l ⁄ min]
∕8 10 10 140 163 543 301 1 0.264 163 543 311 1 0.264

3

1
∕2 15 10 200 163 543 302 1 0.271 163 543 312 1 0.271
3
∕4 20 10 470 163 543 303 1 0.389 163 543 313 1 0.389
1 25 10 793 163 543 304 1 0.590 163 543 314 1 0.590
1 1∕4 32 10 1290 163 543 305 1 1.007 163 543 315 1 1.007
1 1∕2 40 10 1910 163 543 306 1 1.487 163 543 316 1 1.487
2 50 10 3100 163 543 307 1 2.889 163 543 317 1 2.889

NPT D H H1 H2 L L1 L2 L3 L4 L5 L6 M z z1
∕8 50 57 28 8 115 77 73 36 25 32 45 6 87 43

3

1
∕2 50 57 28 8 114 77 73 36 25 32 45 6 81 40
3
∕4 58 67 32 8 131 97 86 43 25 39 58 6 96 48
1 68 73 36 8 155 97 99 50 25 39 58 6 111 56
1 1∕4 84 90 45 9 181 128 120 60 45 54 74 8 134 67
1 1∕2 97 97 51 9 205 128 137 69 45 54 74 8 159 80
2 124 116 65 9 261 152 179 89 45 66 87 8 213 106

PF 2 32 002 803

49
Horizontal/T-port
With solvent cement sockets ASTM
Model:
546)
• Ball seals PTFE
bar)
[l ⁄ min]
∕8 10 10 140 163 543 441 1 0.280 163 543 451 1 0.280

3

1
∕2 15 10 200 163 543 442 1 0.286 163 543 452 1 0.286
3
∕4 20 10 470 163 543 443 1 0.408 163 543 453 1 0.408
1 25 10 793 163 543 444 1 0.609 163 543 454 1 0.609
1 1∕4 32 10 1290 163 543 445 1 1.031 163 543 455 1 1.031
1 1∕2 40 10 1910 163 543 446 1 1.512 163 543 456 1 1.512
2 50 10 3100 163 543 447 1 2.923 163 543 457 1 2.923

Size D H H1 H2 L L1 L2 L3 L4 L5 L6 M z z1
∕8 50 79 28 8 123 87 73 36 25 42 45 6 85 42

3

1
∕2 50 79 28 8 122 87 73 36 25 42 45 6 77 38
3
∕4 58 88 32 8 141 108 86 43 25 50 58 6 92 46
1 68 94 36 8 161 108 99 50 25 50 58 6 105 53
1 1∕4 84 113 45 9 187 141 120 60 45 66 75 8 126 63
1 1∕2 97 119 51 9 213 141 137 69 45 66 75 8 143 72
2 124 141 65 9 261 165 179 89 45 78 87 8 185 92

PF 2 32 002 803

50
Horizontal/L-port
Model:
546)
• Ball seals PTFE
• Delivery status A-C opened, see flow scheme
bar)
[l ⁄ min]
16 10 10 50 163 543 001 1 0.265 163 543 011 1 0.265

20 15 10 75 163 543 002 1 0.272 163 543 012 1 0.272

25 20 10 150 163 543 003 1 0.391 163 543 013 1 0.391
32 25 10 280 163 543 004 1 0.598 163 543 014 1 0.598
40 32 10 480 163 543 005 1 1.018 163 543 015 1 1.018
50 40 10 620 163 543 006 1 1.509 163 543 016 1 1.509
63 50 10 1230 163 543 007 1 2.938 163 543 017 1 2.938

16 50 57 28 8 109 77 73 36 25 32 45 6 81 40

20 50 57 28 8 112 77 73 36 25 32 45 6 81 40
25 58 67 32 8 131 97 86 43 25 39 58 6 94 47
32 68 73 36 8 151 97 99 50 25 39 58 6 107 54
40 84 90 45 9 181 128 120 60 45 54 74 8 130 65
50 97 97 51 9 205 128 137 69 45 54 74 8 143 72
63 124 116 65 9 261 152 179 89 45 66 87 8 185 92

d closest
[mm] inch
[inch]
16 ∕8

3
20 1
∕2
25 3
∕4
32 1
40 1 1∕4
50 1 1∕2
63 2

PF 2 32 002 801

51
Horizontal/L-port
Model:
546)
• Ball seals PTFE
bar)
[l ⁄ min]
16 10 10 50 163 543 381 1 0.281 163 543 391 1 0.281

20 15 10 75 163 543 382 1 0.287 163 543 392 1 0.287

25 20 10 150 163 543 383 1 0.410 163 543 393 1 0.410
32 25 10 280 163 543 384 1 0.616 163 543 394 1 0.616
40 32 10 480 163 543 385 1 1.043 163 543 395 1 1.043
50 40 10 620 163 543 386 1 1.534 163 543 396 1 1.534
63 50 10 1230 163 543 387 1 2.972 163 543 397 1 2.972

16 50 79 28 8 109 87 73 36 25 42 45 6 81 40

20 50 79 28 8 112 87 73 36 25 42 45 6 81 40
25 58 88 32 8 131 108 86 43 25 50 58 6 94 47
32 68 94 36 8 151 108 99 50 25 50 58 6 107 54
40 84 113 45 9 181 141 120 60 45 66 75 8 130 65
50 97 119 51 9 205 141 137 69 45 66 75 8 143 72
63 124 141 65 9 261 165 179 89 45 78 87 8 185 92

d closest
[mm] inch
[inch]
16 ∕8

3
20 1
∕2
25 3
∕4
32 1
40 1 1∕4
50 1 1∕2
63 2

PF 2 32 002 801

52
Horizontal/L-port
Model:
546)
• Ball seals PTFE
bar)
[l ⁄ min]
16 10 10 50 163 543 021 1 0.272 163 543 031 1 0.272

20 15 10 75 163 543 022 1 0.282 163 543 032 1 0.282

25 20 10 150 163 543 023 1 0.408 163 543 033 1 0.408
32 25 10 280 163 543 024 1 0.624 163 543 034 1 0.624
40 32 10 480 163 543 025 1 1.041 163 543 035 1 1.041
50 40 10 620 163 543 026 1 1.578 163 543 036 1 1.578
63 50 10 1230 163 543 027 1 3.075 163 543 037 1 3.075

d D H H1 H2 L L1 L2 L3 L4 L5 L6 L7 M closest
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] inch
[inch]
16 50 57 28 8 131 77 73 36 25 32 45 137 6 ∕8

3
20 50 57 28 8 141 77 73 36 25 32 45 147 6 1
∕2
25 58 67 32 8 165 97 86 43 25 39 58 171 6 3
∕4
32 68 73 36 8 182 97 99 50 25 39 58 188 6 1
40 84 90 45 9 209 128 120 60 45 54 74 215 8 1 1∕4
50 97 97 51 9 242 128 137 69 45 54 74 248 8 1 1∕2
63 124 116 65 9 302 152 179 89 45 66 87 308 8 2

PF 2 32 002 801

53
Horizontal/L-port
Model:
546)
• Ball seals PTFE
bar)
[l ⁄ min]
∕8 10 10 50 163 543 041 1 0.265 163 543 051 1 0.265

3

1
∕2 15 10 75 163 543 042 1 0.272 163 543 052 1 0.272
3
∕4 20 10 150 163 543 043 1 0.391 163 543 053 1 0.391
1 25 10 280 163 543 044 1 0.598 163 543 054 1 0.598
1 1∕4 32 10 480 163 543 045 1 1.018 163 543 055 1 1.018
1 1∕2 40 10 620 163 543 046 1 1.509 163 543 056 1 1.509
2 50 10 1230 163 543 047 1 2.938 163 543 057 1 2.938

Rp D H H1 H2 L L1 L2 L3 L4 L5 L6 M z z1
∕8 50 57 28 8 113 77 73 36 25 32 45 6 87 43

3

1
∕2 50 57 28 8 116 77 73 36 25 32 45 6 85 42
3
∕4 58 67 32 8 135 97 86 43 25 39 58 6 100 50
1 68 73 36 8 155 97 99 50 25 39 58 6 113 57
1 1∕4 84 90 45 9 179 128 120 60 45 54 74 8 134 67
1 1∕2 97 97 51 9 201 128 137 69 45 54 74 8 155 78
2 124 116 65 9 255 152 179 89 45 66 87 8 199 99

PF 2 32 002 801

54
Horizontal/L-port
With threaded sockets NPT
Model:
546)
• Ball seals PTFE
NPT DN PN kv-val- EPDM SP Weight FPM SP Weight
bar)
[l ⁄ min]
∕8 10 10 50 163 543 101 1 0.265 163 543 111 1 0.265

3

1
∕2 15 10 75 163 543 102 1 0.272 163 543 112 1 0.272
3
∕4 20 10 150 163 543 103 1 0.391 163 543 113 1 0.391
1 25 10 280 163 543 104 1 0.598 163 543 114 1 0.598
1 1∕4 32 10 480 163 543 105 1 1.018 163 543 115 1 1.018
1 1∕2 40 10 620 163 543 106 1 1.509 163 543 116 1 1.509
2 50 10 1230 163 543 107 1 2.938 163 543 117 1 2.938

NPT D H H1 H2 L L1 L2 L3 L4 L5 L6 M z z1
∕8 50 57 28 8 115 77 73 36 25 32 45 6 87 43

3

1
∕2 50 57 28 8 114 77 73 36 25 32 45 6 81 40
3
∕4 58 67 32 8 131 97 86 43 25 39 58 6 96 48
1 68 73 36 8 155 97 99 50 25 39 58 6 111 56
1 1∕4 84 90 45 9 181 128 120 60 45 54 74 8 134 67
1 1∕2 97 97 51 9 205 128 137 69 45 54 74 8 159 80
2 124 116 65 9 261 152 179 89 45 66 87 8 213 106

PF 2 32 002 803

55
Horizontal/L-port
Model:
546)
• Ball seals PTFE
bar)
[l ⁄ min]
∕8 10 10 50 163 543 421 1 0.281 163 543 431 1 0.281

3

1
∕2 15 10 75 163 543 422 1 0.287 163 543 432 1 0.287
3
∕4 20 10 150 163 543 423 1 0.410 163 543 433 1 0.410
1 25 10 280 163 543 424 1 0.616 163 543 434 1 0.616
1 1∕4 32 10 480 163 543 425 1 1.043 163 543 435 1 1.043
1 1∕2 40 10 620 163 543 426 1 1.534 163 543 436 1 1.534
2 50 10 1230 163 543 427 1 2.972 163 543 437 1 2.972

∕8 50 79 28 8 123 87 73 36 25 42 45 6 85 42

3

1
∕2 50 79 28 8 122 87 73 36 25 42 45 6 77 38
3
∕4 58 88 32 8 141 108 86 43 25 50 58 6 92 46
1 68 94 36 8 161 108 99 50 25 50 58 6 105 53
1 1∕4 84 113 45 9 187 141 120 60 45 66 75 8 126 63
1 1∕2 97 119 51 9 213 141 137 69 45 66 75 8 143 72
2 124 141 65 9 261 165 179 89 45 78 87 8 185 92

PF 2 32 002 803

56
Horizontal/L-port
Model:
546)
• Ball seals PTFE
bar)
[l ⁄ min]
∕8 10 10 50 163 543 081 1 0.265 163 543 091 1 0.265

3

1
∕2 15 10 75 163 543 082 1 0.272 163 543 092 1 0.272
3
∕4 20 10 150 163 543 083 1 0.391 163 543 093 1 0.391
1 25 10 280 163 543 084 1 0.598 163 543 094 1 0.598
1 1∕4 32 10 480 163 543 085 1 1.018 163 543 095 1 1.018
1 1∕2 40 10 620 163 543 086 1 1.480 163 543 096 1 1.496
2 50 10 1230 163 543 087 1 2.938 163 543 097 1 2.938

∕8 50 57 28 8 123 77 73 36 25 32 45 6 85 42

3

1
∕2 50 57 28 8 122 77 73 36 25 32 45 6 77 38
3
∕4 58 67 32 8 141 97 86 43 25 39 58 6 92 46
1 68 73 36 8 161 97 99 50 25 39 58 6 105 53
1 1∕4 84 90 45 9 187 128 120 60 45 54 74 8 126 63
1 1∕2 97 97 51 9 213 128 137 69 45 54 74 8 143 72
2 124 116 65 9 261 152 179 89 45 66 87 8 185 92

PF 2 32 002 803

57
Diaphragm valves new generation
Diaphragm valve type 514 PVC-C
Model:
• Double flow rate compared to predecessor
• One housing nut replaces four screws
• Handwheel with built-in locking mechanism
• Short overall length
Option:
• Self adjusting multifunctional module with integrated limit switches
d DN PN kv-val- EPDM SP Weight PTFE/EPDM SP Weight
bar)
[l ⁄ min]
20 15 10 125 163 514 012 1 0.409 163 514 032 1 0.312

25 20 10 271 163 514 013 1 0.448 163 514 033 1 0.558

32 25 10 481 163 514 014 1 0.707 163 514 034 1 1.207
40 32 10 759 163 514 015 1 1.516 163 514 035 1 1.536
50 40 10 1263 163 514 016 1 1.674 163 514 036 1 1.541
63 50 10 1728 163 514 017 1 2.568 163 514 037 1 3.622

d D D2 D3 H H1 H2 L L2 M z Lift = closest
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] Hx inch
[mm] [inch]
20 65 65 43 73 14 12 128 25 M6 96 7 ∕2

1
25 80 65 51 81 18 12 152 25 M6 114 10 ∕4
3
32 88 87 58 107 22 12 166 25 M6 122 13 1

40 101 87 72 115 26 15 192 45 M8 140 15 1 1∕4
50 117 135 83 148 32 15 222 45 M8 160 19 1 1∕2
PF 2 31 158 064 63 144 135 100 166 39 15 266 45 M8 190 25 2

Model:
• Overall length EN 558
Option:
bar)
[l ⁄ min]
20 15 10 125 163 515 012 1 0.344 163 515 032 1 0.344

25 20 10 271 163 515 013 1 0.361 163 515 033 1 0.364

32 25 10 481 163 515 014 1 0.589 163 515 034 1 1.073
40 32 10 759 163 515 015 1 1.269 163 515 035 1 1.290
50 40 10 1263 163 515 016 1 2.314 163 515 036 1 2.343
63 50 10 1728 163 515 017 1 3.054 163 515 037 1 3.082

d D D2 H H1 H2 L L2 M Lift = closest
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] Hx inch
[mm] [inch]
20 65 65 73 14 12 124 25 M6 7 ∕2

1
25 80 65 81 18 12 144 25 M6 10 ∕4
3
32 88 87 107 22 12 154 25 M6 13 1
40 101 87 115 26 15 174 45 M8 15 1 1∕4
50 117 135 148 32 15 194 45 M8 19 1 1∕2
PF 2 31 158 064 63 144 135 166 39 15 224 45 M8 25 2

58
With backing flanges PP-V metric/BS
Model:
• Flat sealing faces
• Connecting dimension: ISO 7005 PN 10, EN 1092 PN 10, DIN 2501 PN 10, BS 4504
PN 10
Option:
bar)
[l ⁄ min]
20 15 10 125 163 517 112 1 0.447 163 517 132 1 0.528

25 20 10 271 163 517 113 1 0.695 163 517 133 1 0.695

32 25 10 481 163 517 114 1 1.388 163 517 134 1 0.952
40 32 10 759 163 517 115 1 1.797 163 517 135 1 1.818
50 40 10 1263 163 517 116 1 2.854 163 517 136 1 2.142
63 50 10 1728 163 517 117 1 3.318 163 517 137 1 3.115

d D D2 D3 D4 D5 H H1 H2 L L2 M Lift = closest
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] Hx inch
[mm] [inch]
20 65 65 95 65 14 73 14 12 130 25 M6 7 ∕2

1
25 80 65 105 75 14 81 18 12 150 25 M6 10 3
∕4
32 88 87 115 85 14 107 22 12 160 25 M6 13 1
40 101 87 140 100 18 115 26 15 180 45 M8 15 1 1∕4
50 117 135 150 110 18 148 32 15 200 45 M8 19 1 1∕2
PF 2 31 158 064 63 144 135 165 125 18 166 39 15 230 45 M8 25 2

59
Diaphragm valves
With flanges PP-V
Model:
• DN 15-65 with backing flange
• DN 80-150 with fixed flange
Option:
• Handwheel lockable DN15-65 (basic version not lockable)
* DN80 and DN150 fixed flanges metric and inch ANSI B16.5
d Size DN PN kv-val- EPDM PTFE/EPDM SP Weight
[mm] [inch] [mm] [bar] ue (Δp=1 Code Code [kg]
bar)
[l ⁄ min]
75 2 ∕2 65 10 992 163 317 523 163 317 538 1 4.425

1

* 90 3 80 10 1700 163 317 024 163 317 039 1 9.822

110 4 100 10 2700 163 317 025 163 317 040 1 13.799

d D D1 D2 D3 H H1 H2 L L1 L2 M Lift = AL
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] Hx
[mm]
75 185 145 152 18 201 46 15 290 70 M8 30 4

* 90 200 160 270 18 265 57 23 310 35 120 M12 40 8

110 225 180 270 18 304 69 23 350 35 120 M12 50 8

PF 2 32 169 020

60
Butterfly valves
Butterfly valve type 567 PVC-C
Bare shaft
Model:
• Overall length according to EN 558, ISO 5752
• Connecting dimension: ISO 7005 PN 10, EN 1092 PN 10, DIN 2501 PN 10, ANSI/
ASME B 16.5 Class 150, BS 1560: 1989, BS 4504, JIS B 2220
• Interface F07 according to DIN/ISO 5211
d Size DN PN kv-val- EPDM SP Weight FPM SP Weight
[mm] [inch] [mm] [bar] ue (Δp=1 Code [kg] Code [kg]
bar)
[l ⁄ min]
63 2 50 10 1470 163 567 802 1 0.831 163 567 822 1 0.835

75 2 1∕2 65 10 2200 163 567 803 1 0.947 163 567 823 1 0.952
90 3 80 10 3000 163 567 804 1 1.079 163 567 824 1 1.097
110 4 100 10 6500 163 567 805 1 1.759 163 567 825 1 1.737
140 5 125 10 11500 163 567 806 1 2.361 163 567 826 1 2.379
160 6 150 10 16600 163 567 807 1 3.289 163 567 827 1 3.364
225 8 200 10 39600 163 567 808 1 5.269 163 567 828 1 5.094

d PTFE
[mm] Code
63 163 567 832

75 163 567 833

90 163 567 834
110 163 567 835
140 163 567 836
160 163 567 837
225 163 567 838

d d2 D D1 D1 D3 D4 H H1 H2 H3 H4 H5 L Q1
[mm] [mm] [mm] min. max. [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
[mm] [mm]
63 104 19 120 125 70 90 222 77 134 27 23 11 45 40

75 115 19 140 145 70 90 235 83 140 27 23 11 46 54

90 131 19 150 160 70 90 247 89 146 27 23 11 49 67
110 161 19 175 191 70 90 287 104 167 16 23 14 56 88
140 187 23 210 216 70 90 313 117 181 16 23 14 64 113
160 215 24 241 241 70 90 335 130 189 19 23 17 72 139
225 267 23 290 295 70 90 387 158 210 19 23 17 73 178

d Q2
[mm] [mm]
63

75 35
90 50
110 74
140 97
160 123
PF 2 32 693 998 225 169

61
Hand lever with ratchet settings
Model:
bar)
[l ⁄ min]
63 2 50 10 1470 163 567 002 1 1.257 163 567 022 1 1.268

75 2 1∕2 65 10 2200 163 567 003 1 1.366 163 567 023 1 1.174
90 3 80 10 3000 163 567 004 1 1.542 163 567 024 1 1.997
110 4 100 10 6500 163 567 005 1 2.231 163 567 025 1 2.715
140 5 125 10 11500 163 567 006 1 2.820 163 567 026 1 2.536
160 6 150 10 16600 163 567 007 1 6.719 163 567 027 1 3.361
225 8 200 10 39600 163 567 008 1 5.873 163 567 028 1 6.803

d PTFE
[mm] Code
63 163 567 202

75 163 567 203

90 163 567 204
110 163 567 205
140 163 567 206
160 163 567 207
225 163 567 208

d d2 D D1 D1 H H1 H2 H3 L L1 L2 Q1 Q2
[mm] [mm] [mm] min. max. [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
[mm] [mm]
63 104 19 120 125 264 77 134 54 45 106 205 40

75 115 19 140 145 277 83 140 54 46 106 205 54 35

90 131 19 150 160 289 89 146 54 49 106 205 67 50
110 161 19 175 191 325 104 167 55 56 106 255 88 74
140 187 23 210 216 352 117 181 55 64 106 255 113 97
160 215 24 241 241 373 130 189 55 72 106 255 139 123
225 267 23 290 295 435 158 210 67 73 140 408 178 169

PF 2 32 693 001
62
Reduction gear with handwheel
Model:
bar)
[l ⁄ min]
63 2 50 10 1470 163 567 042 1 3.078 163 567 062 1 3.078

75 2 1∕2 65 10 2200 163 567 043 1 3.201 163 567 063 1 3.212
90 3 80 10 3000 163 567 044 1 3.384 163 567 064 1 3.391
110 4 100 10 6500 163 567 045 1 4.019 163 567 065 1 4.033
140 5 125 10 11500 163 567 046 1 4.526 163 567 066 1 4.526
160 6 150 10 16600 163 567 047 1 5.601 163 567 067 1 5.624
225 8 200 10 39600 163 567 048 1 7.326 163 567 068 1 7.354

d PTFE
[mm] Code
63 163 567 242

75 163 567 243

90 163 567 244
110 163 567 245
140 163 567 246
160 163 567 247
225 163 567 248

d d2 D D1 D1 D3 H H1 H2 H3 L L1 L2 L3 Q1
[mm] [mm] [mm] min. max. [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
[mm] [mm]
63 104 19 120 125 150 278 77 134 50 45 110 120 155 40

75 115 19 140 145 150 291 83 140 50 46 110 120 155 54

90 131 19 150 160 150 303 89 146 50 49 110 120 155 67
110 160 19 175 191 150 339 104 167 50 56 110 120 155 88
140 187 23 210 216 150 365 117 181 50 64 110 120 155 113
160 215 24 241 241 150 387 130 189 50 72 110 120 155 139
225 267 23 290 295 150 436 158 210 50 73 110 120 155 178

d Q2
[mm] [mm]
63

75 35
90 50
110 74
140 97
160 123
PF 2 32 693 001 225 169

63
Lugstyle butterfly valve type 568 PVC-C
Bare shaft
Model:
• Outer body in GGG-40.3 epoxy-coated
• Connecting dimension: ISO 7005 PN10, EN 1092 PN10, DIN 2501 PN10
• Interface F07 according to DIN/ISO 5211
bar)
[l ⁄ min]
63 2 50 10 1470 163 568 802 1 2.921 163 568 822 1 2.921

75 2 1∕2 65 10 2200 163 568 803 1 3.288 163 568 823 1 3.288
90 3 80 10 3000 163 568 804 1 4.342 163 568 824 1 4.342
110 4 100 10 6500 163 568 805 1 5.857 163 568 825 1 5.857
140 5 125 10 11500 163 568 806 1 7.845 163 568 826 1 7.845
160 6 150 10 16600 163 568 807 1 9.824 163 568 827 1 9.824
225 8 200 10 39600 163 568 808 1 15.042 163 568 828 1 15.042

d PTFE
[mm] Code
63 163 568 832

75 163 568 833

90 163 568 834
110 163 568 835
140 163 568 836
160 163 568 837
225 163 568 838

d d2 D D1 D3 D4 H H1 H2 H3 H4 L Q1 Q2
63 150 M16 125 70 90 238 77 134 27 23 45 40

75 170 M16 145 70 90 250 83 140 27 23 46 54 35

90 184 M16 160 70 90 262 89 146 27 23 49 67 50
110 216 M16 180 70 90 287 104 167 16 23 56 88 74
140 246 M16 210 70 90 314 117 181 16 23 64 113 97
160 273 M20 240 70 90 338 130 189 19 23 72 139 123
225 334 M20 295 70 90 387 158 210 19 23 73 178 169

PF 2 32 694 998
64
Hand lever with ratchet settings
Model:
bar)
[l ⁄ min]
63 2 50 10 1470 163 568 002 1 3.143 163 568 022 1 3.143

75 2 1∕2 65 10 2200 163 568 003 1 3.510 163 568 023 1 3.510
90 3 80 10 3000 163 568 004 1 4.564 163 568 024 1 4.564
110 4 100 10 6500 163 568 005 1 6.127 163 568 025 1 6.127
140 5 125 10 11500 163 568 006 1 8.115 163 568 026 1 8.115
160 6 150 10 16600 163 568 007 1 10.094 163 568 027 1 10.094
225 8 200 10 39600 163 568 008 1 15.849 163 568 028 1 15.849

d PTFE
[mm] Code
63 163 568 202

75 163 568 203

90 163 568 204
110 163 568 205
140 163 568 206
160 163 568 207
225 163 568 208

d d2 D D1 H H1 H2 H3 L L1 L2 L3 Q1 Q2
63 150 M16 125 265 77 134 54 45 106 205 150 40

75 170 M16 145 277 83 140 54 46 106 205 160 54 35

90 184 M16 160 289 89 146 54 49 106 205 205 67 50
110 216 M16 180 326 104 167 55 56 106 255 244 88 74
140 246 M16 210 353 117 181 55 64 106 255 272 113 97
160 273 M20 240 374 130 189 55 72 106 255 297 139 123
225 334 M20 295 435 158 210 67 73 140 408 360 178 169

PF 2 32 694 001

65
Reduction gear with handwheel
Model:
bar)
[l ⁄ min]
63 2 50 10 1470 163 568 042 0 5.181 163 568 062 0 5.181

75 2 1∕2 65 10 2200 163 568 043 0 5.548 163 568 063 0 5.548
90 3 80 10 3000 163 568 044 0 6.602 163 568 064 0 6.602
110 4 100 10 6500 163 568 045 0 8.117 163 568 065 0 8.117
140 5 125 10 11500 163 568 046 0 10.105 163 568 066 0 10.105
160 6 150 10 16600 163 568 047 1 12.084 163 568 067 1 12.084
225 8 200 10 39600 163 568 048 1 17.302 163 568 068 1 17.302

d PTFE
[mm] Code
63 163 568 242

75 163 568 243

90 163 568 244
110 163 568 245
140 163 568 246
160 163 568 247
225 163 568 248

d d2 D D1 D3 H H1 H2 H3 L L1 L2 L3 L4 Q1 Q2
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
63 150 M16 125 150 279 77 134 50 45 110 120 155 150 40

75 170 M16 145 150 291 83 140 50 46 110 120 155 160 54 35
90 184 M16 160 150 303 89 146 50 49 110 120 155 205 67 50
110 216 M16 180 150 339 104 167 50 56 110 120 155 244 88 74
140 246 M16 210 150 366 117 181 50 64 110 120 155 272 113 97
160 273 M20 240 150 387 130 189 50 72 110 120 155 297 139 123
225 334 M20 295 150 436 158 210 50 73 110 120 155 360 178 169

PF 2 32 694 001
66
Cone check valves
Check valve type 561 PVC-C
Model:
• Sealing at a minimum water column of 2 m
• Designed for easy installation and removal
• Vibration free even at high flow velocity
• Flow-optimized return cone, double guided
• For vertical installation
• Compact installation length, same as ball valve type 546
• Z-length, end connectors and union nuts not compatible with type 360
• New DN56-DN100
bar)
[l ⁄ min]
16 10 16 190 163 561 001 1 0.120 163 561 011 1 0.120

20 15 16 180 163 561 002 1 0.120 163 561 012 1 0.120

25 20 16 380 163 561 003 1 0.260 163 561 013 1 0.280
32 25 16 460 163 561 004 1 0.280 163 561 014 1 0.280
40 32 16 850 163 561 005 1 0.490 163 561 015 1 0.490
50 40 16 1080 163 561 006 1 0.710 163 561 016 1 0.710

63 50 16 1670 163 561 007 1 1.456 163 561 017 1 1.470

75 65 16 2950 163 561 008 1 3.460 163 561 018 1 3.480
90 80 16 3600 163 561 009 1 5.540 163 561 019 1 5.570
110 100 16 4150 163 561 010 1 8.930 163 561 020 1 8.970

d D L L2 z closest
[mm] [mm] [mm] [mm] [mm] inch
[inch]
16 50 92 56 64 ∕8

3
20 50 95 56 64 1
∕2
25 58 110 65 72 3
∕4
32 68 123 71 79 1
40 84 146 85 94 1 1∕4
50 97 157 89 95 1 1∕2

63 124 183 101 107 2

75 166 233 136 144 2 1∕2
90 200 254 141 151 3
PF 2 31 161 012 110 238 301 164 174 4

67
Model:
• For vertical installation
• New DN56-DN100
bar)
[l ⁄ min]
∕8 10 10 190 163 561 021 1 0.120 163 561 031 1 0.120

3

1
∕2 15 10 180 163 561 022 1 0.120 163 561 032 1 0.120
3
∕4 20 10 380 163 561 023 1 0.260 163 561 033 1 0.280
1 25 10 460 163 561 024 1 0.290 163 561 034 1 0.290
1 1∕4 32 10 850 163 561 025 1 0.490 163 561 035 1 0.500
1 1∕2 40 10 1080 163 561 026 1 0.740 163 561 036 1 0.750

2 50 10 1670 163 561 027 1 1.530 163 561 037 1 1.530

2 1∕2 65 10 2950 163 561 028 1 3.530 163 561 038 1 3.550
3 80 10 3600 163 561 029 1 5.670 163 561 039 1 5.700
4 100 10 4150 163 561 030 1 8.990 163 561 040 1 9.030

Rp D L L2 z
[inch] [mm] [mm] [mm] [mm]
∕8 50 95 56 69

3

1
∕2 50 100 56 67
3
∕4 58 114 65 78
1 68 127 71 85
1 1∕4 84 146 85 100
1 1∕2 97 152 89 106

2 124 177 101 121

2 1∕2 166 233 136 144
3 200 254 141 151
PF 2 31 161 012 4 238 301 164 174

68
Model:
• For horizontal or vertical installation
• Spring loaded, spring made of stainless steel (1.4310)
• Spring available in other materials, see spare parts
• New DN56-DN100
bar)
[l ⁄ min]
16 10 16 190 163 562 001 1 0.120 163 562 011 1 0.120

20 15 16 180 163 562 002 1 0.120 163 562 012 1 0.120

25 20 16 380 163 562 003 1 0.260 163 562 013 1 0.280
32 25 16 460 163 562 004 1 0.280 163 562 014 1 0.280
40 32 16 850 163 562 005 1 0.490 163 562 015 1 0.490
50 40 16 1080 163 562 006 1 0.710 163 562 016 1 0.710

63 50 16 1670 163 562 007 1 1.460 163 562 017 1 1.470

75 65 16 2950 163 562 008 1 3.460 163 562 018 1 3.480
90 80 16 3600 163 562 009 1 5.540 163 562 019 1 5.570
110 100 16 4150 163 562 010 1 8.930 163 562 020 1 8.970

d D L L2 z closest
[mm] [mm] [mm] [mm] [mm] inch
[inch]
16 50 92 56 64 ∕8

3
20 50 95 56 64 1
∕2
25 58 110 65 72 3
∕4
32 68 123 71 79 1
40 84 146 85 94 1 1∕4
50 97 157 89 95 1 1∕2

63 124 183 101 107 2

75 166 233 136 144 2 1∕2
90 200 254 141 151 3
PF 2 31 161 012 110 238 301 164 174 4

69
Model:
• For horizontal or vertical installation
• Spring loaded, spring made of stainless steel (1.4310)
• New DN56-DN100
bar)
[l ⁄ min]
∕8 10 10 190 163 562 021 1 0.120 163 562 031 1 0.120

3

1
∕2 15 10 180 163 562 022 1 0.120 163 562 032 1 0.120
3
∕4 20 10 380 163 562 023 1 0.260 163 562 033 1 0.280
1 25 10 460 163 562 024 1 0.290 163 562 034 1 0.290
1 1∕4 32 10 850 163 562 025 1 0.490 163 562 035 1 0.500
1 1∕2 40 10 1080 163 562 026 1 0.740 163 562 036 1 0.750

2 50 10 1670 163 562 027 1 1.530 163 562 037 1 1.530

2 1∕2 65 10 2950 163 562 028 1 3.530 163 562 038 1 3.550
3 80 10 3600 163 562 029 1 5.670 163 562 039 1 5.700
4 100 10 4150 163 562 030 1 8.990 163 562 040 1 9.030

Rp D L L2 z
[inch] [mm] [mm] [mm] [mm]
∕8 50 95 56 69

3

1
∕2 50 100 56 67
3
∕4 58 114 65 78
1 68 127 71 85
1 1∕4 84 146 85 100
1 1∕2 97 152 89 106

2 124 177 101 121

2 1∕2 166 233 136 144
3 200 254 141 151
PF 2 31 161 012 4 238 301 164 174

70
Process control valves
Ventilating and bleed valve
Type 591 PVC-C
Model:
• With protection cap up to DN50 made of PP-GF, DN65-100 made of POM
• Floater made of PP-H
• Compact installation length
d DN PN EPDM FPM D L t closest
[mm] [mm] [bar] Code Code [mm] [mm] [mm] inch
[inch]
16 10 16 163 591 001 163 591 011 50 118 14 ∕8

3
20 15 16 163 591 002 163 591 012 50 124 16 1

∕2
25 20 16 163 591 003 163 591 013 58 142 19 3
∕4
32 25 16 163 591 004 163 591 014 68 157 22 1
40 32 16 163 591 005 163 591 015 84 179 26 1 1∕4
50 40 16 163 591 006 163 591 016 97 197 31 1 1∕2

63 50 16 163 591 007 163 591 017 124 229 38 2

75 65 16 163 591 008 163 591 018 166 258 45 2 1∕2
90 80 16 163 591 009 163 591 019 200 277 52 3
110 100 16 163 591 010 163 591 020 238 320 64 4

PF 2 31 161 012
Ventilating valve type 595 PVC-C

Model:
• With protection cap up to DN50 made of PP-GF, DN65-100 made of POM
• Spring loaded, spring made of NIMONIC 90, HALAR coated
• Compact installation length
d DN PN EPDM FPM D L t closest
[mm] [mm] [bar] Code Code [mm] [mm] [mm] inch
[inch]
16 10 16 163 595 001 163 595 011 50 118 14 ∕8

3
20 15 16 163 595 002 163 595 012 50 124 16 1

∕2
25 20 16 163 595 003 163 595 013 58 142 19 3
∕4
32 25 16 163 595 004 163 595 014 68 157 22 1
40 32 16 163 595 005 163 595 015 84 179 26 1 1∕4
50 40 16 163 595 006 163 595 016 97 197 31 1 1∕2

63 50 16 163 595 007 163 595 017 124 229 38 2

75 65 16 163 595 008 163 595 018 166 258 45 2 1∕2
90 80 16 163 595 009 163 595 019 200 277 52 3
110 100 16 163 595 010 163 595 020 238 320 64 4

PF 2 31 161 012

71
Pressure regulating valves
Pressure reducing valve type 582 PVC-C
Without manometer
Model:
• Diaphragm PTFE/EPDM
• 0.5-9.0 bar (7-130 psi)
0.3-3.0 bar (4-44 psi) on request

Manometer on request
d DN PN O-rings O-rings FPM
[mm] [mm] [bar] EPDM Code
Code
16 10 10 163 582 001 163 582 011

20 15 10 163 582 002 163 582 012

25 20 10 163 582 003 163 582 013
32 25 10 163 582 004 163 582 014
40 32 10 163 582 005 163 582 015
50 40 10 163 582 006 163 582 016
63 50 10 163 582 007 163 582 017

d D H H1 H2 H3 L L3 L5 M closest inch
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [inch]
16 79 132 111 21 12 134 42 40 M6 ∕8

3
20 79 132 111 21 12 134 42 40 M6 1

∕2
25 100 177 148 29 14 174 53 46 M6 3
∕4
32 100 177 148 29 14 174 53 46 M6 1
40 147 251 207 44 21 224 76 65 M8 1 1∕4
50 147 251 207 44 21 224 76 65 M8 1 1∕2
63 147 251 207 44 21 244 76 65 M8 2

72
With manometer
Model:
• 0.5-9.0 bar (7-130 psi)
• Attention: Manometer with brass connection in direct contact with medium. Check for
chemical resistance, otherwise chose the optional manometer adapter for media sep-
aration.

Code
16 10 10 163 582 021 163 582 031

20 15 10 163 582 022 163 582 032

25 20 10 163 582 023 163 582 033
32 25 10 163 582 024 163 582 034
40 32 10 163 582 025 163 582 035
50 40 10 163 582 026 163 582 036
63 50 10 163 582 027 163 582 037

d D H H1 H2 H3 L L3 L4 L5 M closest inch
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [inch]
16 79 132 111 21 12 134 42 77 40 M6 ∕8

3
20 79 132 111 21 12 134 42 77 40 M6 1

∕2
25 100 177 148 29 14 174 53 88 46 M6 3
∕4
32 100 177 148 29 14 174 53 88 46 M6 1
40 147 251 207 44 21 224 76 111 65 M8 1 1∕4
50 147 251 207 44 21 224 76 111 65 M8 1 1∕2
63 147 251 207 44 21 244 76 111 65 M8 2

73
Unions with solvent cement sockets metric
Without manometer
Model:
• 0.5-9.0 bar (7-130 psi)

Code
20 15 10 163 582 102 163 582 112

25 20 10 163 582 103 163 582 113

32 25 10 163 582 104 163 582 114
40 32 10 163 582 105 163 582 115
50 40 10 163 582 106 163 582 116
63 50 10 163 582 107 163 582 117

d D D1 H H1 H2 H3 L L2 L3 L5 M z closest inch
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [inch]
20 79 43 132 111 21 12 162 120 42 40 M6 126 ∕2

1
25 100 51 177 148 29 14 198 150 53 46 M6 156 3

∕4
32 100 58 177 148 29 14 204 150 53 46 M6 156 1
40 147 72 251 207 44 21 267 205 76 65 M8 211 1 1∕4
50 147 83 251 207 44 21 273 205 76 65 M8 211 1 1∕2
63 147 100 251 207 44 21 287 205 76 65 M8 211 2

74
With manometer
Model:
• 0.5-9.0 bar (7-130 psi)
• Attention: Manometer with brass connection in direct contact with medium. Check for
chemical resistance, otherwise chose the optional manometer adapter for media sep-
aration.

Code
20 15 10 163 582 122 163 582 132

25 20 10 163 582 123 163 582 133

32 25 10 163 582 124 163 582 134
40 32 10 163 582 125 163 582 135
50 40 10 163 582 126 163 582 136
63 50 10 163 582 127 163 582 137

d D D1 H H1 H2 H3 L L2 L3 L4 L5 M z
20 79 43 132 111 21 12 162 120 42 77 40 M6 126

25 100 51 177 148 29 14 198 150 53 88 46 M6 156

32 100 58 177 148 29 14 204 150 53 88 46 M6 156
40 147 72 251 207 44 21 267 205 76 111 65 M8 211
50 147 83 251 207 44 21 273 205 76 111 65 M8 211
63 147 100 251 207 44 21 287 205 76 111 65 M8 211

d closest inch
[mm] [inch]
20 ∕2

1
25 3
∕4
32 1
40 1 1∕4
50 1 1∕2
63 2

75
Pressure retaining valve type 586 PVC-C
Without manometer
Model:
• 0.5-9.0 bar (7-130 psi)

Code
16 10 10 163 586 001 163 586 011

20 15 10 163 586 002 163 586 012

25 20 10 163 586 003 163 586 013
32 25 10 163 586 004 163 586 014
40 32 10 163 586 005 163 586 015
50 40 10 163 586 006 163 586 016
63 50 10 163 586 007 163 586 017

d D H H1 H2 H3 L L3 L5 M closest inch
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [inch]
16 79 132 111 21 12 134 42 40 M6 ∕8

3
20 79 132 111 21 12 134 42 40 M6 ∕2

1
25 100 177 148 29 14 174 53 46 M6 3

∕4
32 100 177 148 29 14 174 53 46 M6 1
40 147 251 207 44 21 224 76 65 M8 1 1∕4
50 147 251 207 44 21 224 76 65 M8 1 1∕2
63 147 251 207 44 21 244 76 65 M8 2

Pressure retaining valve type 586 PVC-C
Without manometer
Model:
• 0.5-9.0 bar (7-130 psi)

Code
20 15 10 163 586 102 163 586 112

25 20 10 163 586 103 163 586 113

32 25 10 163 586 104 163 586 114
40 32 10 163 586 105 163 586 115
50 40 10 163 586 106 163 586 116
63 50 10 163 586 107 163 586 117

d D D1 H H1 H2 H3 L L2 L3 L5 M z closest inch
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [inch]
20 79 43 132 111 21 12 162 120 42 40 M6 126 ∕2

1
25 100 51 177 148 29 14 198 150 53 46 M6 156 3

∕4
32 100 58 177 148 29 14 204 150 53 46 M6 156 1
40 147 72 251 207 44 21 267 205 76 65 M8 211 1 1∕4
50 147 83 251 207 44 21 273 205 76 65 M8 211 1 1∕2
63 147 100 251 207 44 21 287 205 76 65 M8 211 2

76
Strainers
Line strainer type 305 PVC-C
Model:
• Protects valves, pumps, etc. from becoming soiled
• Easy dismantling for cleaning the screens
• Cylindrical screen must be ordered separately
d DN PN EPDM SP Weight FPM SP Weight
20 15 10 163 305 302 1 0.110 163 305 317 1 0.120

25 20 10 163 305 303 1 0.160 163 305 318 1 0.160

32 25 10 163 305 304 1 0.250 163 305 319 1 0.250
40 32 10 163 305 305 1 0.380 163 305 320 1 0.640
50 40 10 163 305 306 1 0.640 163 305 321 1 0.640
63 50 10 163 305 307 1 1.072 163 305 322 1 1.076

d D H L L1 L2 closest
[mm] [mm] [mm] [mm] [mm] [mm] inch
[inch]
20 48 65 124 130 28 ∕2

1
25 54 76 144 150 37 3
∕4
32 62 90 154 160 37 1
40 71 104 174 180 44 1 1∕4
50 88 124 194 200 48 1 1∕2
PF 2 32 200 004 63 103 148 224 230 60 2

Screen stainless steel
Screen perforation 0.5 mm
Model:
• Stainless Steel A4 Quality (AISI 316)
• For line strainers Type 305

d DN kv-val- Code D L closest
[mm] [mm] ue (Δp=1 [mm] [mm] inch
bar) [inch]
[l ⁄ min]
20 15 35 161 486 100 14 39 ∕2

1
25 20 60 161 486 101 18 48 3

∕4
32 25 85 161 486 102 24 60 1
40 32 130 161 486 103 30 71 1 1∕4
50 40 200 161 486 104 38 87 1 1∕2
63 50 330 161 486 105 48 106 2

75 65 460 161 486 106 61 100 2 1∕2

PF 2 32 200 999 90 80 665 161 486 107 73 118 3

77
Copiable
Configurator GF ball valve type 546 PVC-C
You will find a large selection of different

Ball valve versions in our range of products. New system
A01 Ball valve 546
elements also provide you with new opportuni-
Material ties for use. In order for us to supply exactly the
B02 PVC-C
ball valve you need for you application, we have
created a selection menu for you.
Dimension
C05 DN 10 3/8‘‘
C06 DN 15 1/2‘‘
C07 DN 20 3/4‘‘ We supply what you put together.
C08 DN 25 1‘‘
C09 DN 32 1 1/4‘‘
C10 DN 40 1 1/2‘‘
C11 DN 50 2‘‘
C12 DN 65 2 1/2"
C13 DN 80 3"
C14 DN 100 4"
Version
D01 Standard, PTFE ball seal
D02 Oilfree, PTFE ball seal (only with specific connecting parts)
D03 Silicon-free, PTFE ball seal for inch ASTM (only with specific connecting parts)
D04 Silicon-free, PVDF ball seal for metric (only with specific connecting parts)
Seals
E01 EPDM seals
E02 FPM seals
Threaded inserts
F01 Without threaded inserts
F02 With threaded inserts
Connecting parts
G11 PVC-C Cement socket metric
G12 PVC-C Cement socket JIS
G13 PVC-C Cement socket inch ASTM
G14 PVC-C Cement spigot metric
G15 PVC-C Threaded socket Rp
G16 PVC-C Threaded socket Rp reinforced (DN10-50)
G17 PVC-C Threaded socket NPT
G40 PE-100 Butt fusion metric
G41 PE-100 Butt fusion spigot SDR11 metric
G42 PE-100 Butt fusion spigot SDR17.6 metric (DN65-100)
G43 PE-100 Butt fusion spigot long SDR11 metric
G72 Backing flange PP-steel metric
G73 Backing flange PP-steel inch ANSI
G81 PVC-C Valve end blank

Multi-functional module
I01 No multi-functional module
I02 Empty module
I03 Module with 2 limit switches Ag, Ni
I04 Module with 2 limit switches Au
I05 Module with 2 inductive switches Namur
I06 Module with 2 inductive switches PNP
I07 Module with 2 inductive switches NPN
Lever
K01 Standard handle red
K02 Standard handle black
K11 Multi-functional handle red
Mounting plate
L01 without mounting plate
L02 with mounting plate
A01 B02 C D E F G G I K L
left right
78
Copiable
GF ball valve type 546 with electric actuator
It’s so easy to actuate

the type 546:
With the configurator, you have a choice of
new electric actuators, the EA11 for standard
applications and the EA21 with modular
design and accessories, for practically and
type of operation.
We supply what you put together.
Electric Actuator EA11

T01 EA11 24 V
T02 EA11 100–230 V
Accessories EA11
U01 No accessories
U02 2 limit switches Ag, Ni
U03 Heating element
U04 Fail-safe return
U05 2 limit switches Ag, Ni normally open
Electric Actuator EA21/31

T03 EA21/31 24 V
T04 EA21/31 100–230 V
Accessories EA21
W01 No accessories
W02 Heating element
W03 Cycle time module
W04 Cycle time monitoring
W05 Cycles monitoring
W06 Motor current monitoring
W07 2 limit switches Ag, Ni
W08 2 limit switches Gold
W09 2 limit switches NPN
W10 2 limit switches PNP
W11 Positioner
W12 Electric position indicator
W14 Fail-safe return unit
W15 Switch intermediate position
W27 2 limit switches Ag, Ni normally open with connector
W31 Positioner PE25 with galv. separation
T U T W W W W W W
79
Ball valves electric
107
Ball valve type 107 PVC-C 100-230V
With manual emergency override
Model:
• Built on with electric actuator EA11
• Voltage 100-230 V, 50-60 Hz
• Control range 90°<)
• Control time 5 s/90°<)
Option:
bar)
[l ⁄ min]
16 10 10 70 199 107 102 1 1.770 199 107 112 1 1.770

20 15 10 185 199 107 103 1 1.780 199 107 113 1 1.780

25 20 10 350 199 107 104 1 1.860 199 107 114 1 1.860
32 25 10 700 199 107 105 1 1.950 199 107 115 1 1.950
40 32 10 1000 199 107 106 1 2.190 199 107 116 1 0.001
50 40 10 1600 199 107 107 1 2.360 199 107 117 1 2.360
63 50 10 3100 199 107 108 1 3.140 199 107 118 1 3.140

d D H H1 H2 H3 H5 L L1 L2 L4 L5 L6 L7 L8 z
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
16 50 200 27 64 64 137 92 161 56 25 77 83 122 33 64

20 50 200 27 64 64 137 95 161 56 25 77 83 122 33 64

25 58 209 30 73 64 137 110 161 65 25 77 83 122 33 72
32 68 209 36 73 64 137 123 161 71 25 77 83 122 33 79
40 84 220 44 64 64 137 146 161 85 45 77 83 122 33 94
50 97 220 51 84 64 137 157 161 89 45 77 83 122 33 95
63 124 243 64 106 64 137 183 161 101 45 77 83 122 33 107

d closest
[mm] inch
[inch]
16 ∕8

3
20 1
∕2
25 3
∕4
32 1
40 1 1∕4
50 1 1∕2
63 2

PF 3 39 695 032

80
Model:
• Voltage 100-230 V, 50-60 Hz
Option:
bar)
[l ⁄ min]
16 10 10 70 199 107 122 1 1.770 199 107 132 1 1.770

20 15 10 185 199 107 123 1 1.780 199 107 133 1 1.780

25 20 10 350 199 107 124 1 1.860 199 107 134 1 1.860
32 25 10 700 199 107 125 1 1.950 199 107 135 1 1.950
40 32 10 1000 199 107 126 1 2.641 199 107 136 1 2.190
50 40 10 1600 199 107 127 1 2.360 199 107 137 1 2.360
63 50 10 3100 199 107 128 1 3.140 199 107 138 1 3.140

d D H H1 H2 H3 H5 L L1 L2 L3 L4 L5 L6 L7 L8
16 50 200 27 64 64 137 114 161 56 130 25 77 83 122 33

20 50 200 27 64 64 137 124 161 56 130 25 77 83 122 33

25 58 209 30 73 64 137 144 161 65 150 25 77 83 122 33
32 68 209 36 73 64 137 154 161 71 160 25 77 83 122 33
40 84 220 44 84 64 137 174 161 85 180 45 77 83 122 33
50 97 220 51 84 64 137 194 161 89 200 45 77 83 122 33
63 124 243 64 106 64 137 224 161 101 230 45 77 83 122 33

d closest
[mm] inch
[inch]
16 ∕8

3
20 1
∕2
25 3
∕4
32 1
40 1 1∕4
50 1 1∕2
63 2

PF 3 39 695 032

81
Model:
• Voltage 100-230 V, 50-60 Hz
Option:
bar)
[l ⁄ min]
∕8 10 10 70 199 107 702 1 2.100 199 107 712 1 2.100

3

1
∕2 15 10 185 199 107 703 1 2.100 199 107 713 1 2.100
3
∕4 20 10 350 199 107 704 1 2.200 199 107 714 1 2.200
1 25 10 700 199 107 705 1 2.300 199 107 715 1 2.300
1 1∕4 32 10 1000 199 107 706 1 2.600 199 107 716 1 2.600
1 1∕2 40 10 1600 199 107 707 1 3.000 199 107 717 1 3.000
2 50 10 3100 199 107 708 1 3.800 199 107 718 1 3.800

Rp D H H1 H2 H3 H5 L L1 L2 L4 L5 L6 L7 L8 z
[inch] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
∕8 50 200 27 64 64 137 92 161 56 25 77 83 122 33 64

3

1
∕2 50 200 27 64 64 137 95 161 56 25 77 83 122 33 64
3
∕4 58 209 30 73 64 137 110 161 65 25 77 83 122 33 72
1 68 209 36 73 64 137 123 161 71 25 77 83 122 33 79
1 1∕4 84 220 44 84 64 137 146 161 85 45 77 83 122 33 94
1 1∕2 97 220 51 84 64 137 157 161 89 45 77 83 122 33 95
2 124 243 64 106 64 137 183 161 101 45 77 83 122 33 107

PF 3 39 695 032

82
Ball valve type 107 PVC-C 24V
Model:
• Voltage 24 V AC/DC
Option:
bar)
[l ⁄ min]
16 10 10 70 199 107 142 1 1.770 199 107 152 1 1.770

20 15 10 185 199 107 143 1 1.780 199 107 153 1 1.780

25 20 10 350 199 107 144 1 2.237 199 107 154 1 1.860
32 25 10 700 199 107 145 1 1.950 199 107 155 1 1.950
40 32 10 1000 199 107 146 1 2.190 199 107 156 1 2.190
50 40 10 1600 199 107 147 1 2.360 199 107 157 1 2.360
63 50 10 3100 199 107 148 1 3.665 199 107 158 1 3.140

d D H H1 H2 H3 H5 L L1 L2 L4 L5 L6 L7 L8 z
16 50 200 27 64 64 137 92 161 56 25 77 83 122 33 64

20 50 200 27 64 64 137 95 161 56 25 77 83 122 33 64

25 58 209 30 73 64 137 110 161 65 25 77 83 122 33 72
32 68 209 36 73 64 137 123 161 71 25 77 83 122 33 79
40 84 220 44 84 64 137 146 161 85 45 77 83 122 33 94
50 97 220 51 84 64 137 157 161 89 45 77 83 122 33 95
63 124 243 64 106 64 137 183 161 101 45 77 83 122 33 107

d closest
[mm] inch
[inch]
16 ∕8

3
20 1
∕2
25 3
∕4
32 1
40 1 1∕4
50 1 1∕2
63 2

PF 3 39 695 032

83
Model:
Option:
bar)
[l ⁄ min]
16 10 10 70 199 107 162 1 1.770 199 107 172 1 1.770

20 15 10 185 199 107 163 1 1.780 199 107 173 1 1.780

25 20 10 350 199 107 164 1 1.860 199 107 174 1 1.860
32 25 10 700 199 107 165 1 1.950 199 107 175 1 1.950
40 32 10 1000 199 107 166 1 2.190 199 107 176 1 2.190
50 40 10 1600 199 107 167 1 2.360 199 107 177 1 2.360
63 50 10 3100 199 107 168 1 3.140 199 107 178 1 3.140

d D H H1 H2 H3 H5 L L1 L2 L3 L4 L5 L6 L7 L8
16 50 200 27 64 64 137 114 161 56 130 25 77 83 122 33

20 50 200 27 64 64 137 124 161 56 130 25 77 83 122 33

25 58 209 30 73 64 137 144 161 65 150 25 77 83 122 33
32 68 209 36 73 64 137 154 161 71 160 25 77 83 122 33
40 84 220 44 84 64 137 174 161 85 180 45 77 83 122 33
50 97 220 51 84 64 137 194 161 89 200 45 77 83 122 33
63 124 243 64 106 64 137 224 161 101 230 45 77 83 122 33

d closest
[mm] inch
[inch]
16 ∕8

3
20 1
∕2
25 3
∕4
32 1
40 1 1∕4
50 1 1∕2
63 2

PF 3 39 695 032

84
Model:
Option:
bar)
[l ⁄ min]
∕8 10 10 70 199 107 742 1 2.100 199 107 752 1 2.100

3

1
∕2 15 10 185 199 107 743 1 2.100 199 107 753 1 2.100
3
∕4 20 10 350 199 107 744 1 2.200 199 107 754 1 2.200
1 25 10 700 199 107 745 1 2.300 199 107 755 1 2.300
1 1∕4 32 10 1000 199 107 746 1 2.600 199 107 756 1 2.600
1 1∕2 40 10 1600 199 107 747 1 3.000 199 107 757 1 3.000
2 50 10 3100 199 107 748 1 3.800 199 107 758 1 3.800

Rp D H H1 H2 H3 H5 L L1 L2 L4 L5 L6 L7 L8 z
∕8 50 200 27 64 64 137 92 161 56 25 77 83 122 33 64

3

1
∕2 50 200 27 64 64 137 95 161 56 25 77 83 122 33 64
3
∕4 58 209 30 73 64 137 110 161 65 25 77 83 122 33 72
1 68 209 36 73 64 137 123 161 71 25 77 83 122 33 79
1 1∕4 84 220 44 84 64 137 146 161 85 45 77 83 122 33 94
1 1∕2 97 220 51 84 64 137 157 161 89 45 77 83 122 33 95
2 124 243 64 106 64 137 183 161 101 45 77 83 122 33 107

PF 3 39 695 032

85
130
Model:
• Voltage 100-230 V, 50-60 Hz
• Control time: EA21: 5s/90°<), EA31: 15s/90°<)
• Assignment of actuators: EA21 (DN10/15-50), EA31 (DN65-100)
Option:
bar)
[l ⁄ min]
16 10 10 70 199 130 402 1 2.100 199 130 412 1 2.100

20 15 10 185 199 130 403 1 2.100 199 130 413 1 2.100

25 20 10 350 199 130 404 1 2.200 199 130 414 1 2.200
32 25 10 700 199 130 405 1 2.300 199 130 415 1 2.695
40 32 10 1000 199 130 406 1 2.600 199 130 416 1 2.600
50 40 10 1600 199 130 407 1 3.000 199 130 417 1 3.213

63 50 10 3100 199 130 408 1 3.800 199 130 418 1 3.800

75 65 10 5000 199 130 409 1 7.700 199 130 419 1 7.700
90 80 10 7000 199 130 410 1 10.400 199 130 420 1 10.400
110 100 10 11000 199 130 411 1 15.100 199 130 421 1 15.100

d D H H1 H2 H3 H5 L L1 L2 L4 L5 L7 z closest
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] inch
[inch]
16 50 231 27 64 94 167 92 180 56 25 97 122 64 ∕8

3
20 50 231 27 64 94 167 95 180 56 25 97 122 64 1

∕2
25 58 240 30 73 94 167 110 180 65 25 97 122 72 3
∕4
32 68 240 36 73 94 167 123 180 71 25 97 122 79 1
40 84 251 44 84 94 167 146 180 85 45 97 122 94 1 1∕4
50 97 251 51 84 94 167 157 180 89 45 97 122 95 1 1∕2

63 124 273 64 106 94 167 183 180 101 45 97 122 107 2

75 166 346 85 156 94 190 233 180 136 70 98 122 144 2 1∕2
90 200 358 105 168 94 190 254 180 141 70 98 122 151 3
110 238 365 123 175 94 190 301 180 164 120 98 122 174 4

PF 3 39 695 632

86
Model:
• Voltage 100-230 V, 50-60 Hz
Option:
bar)
[l ⁄ min]
16 10 10 70 199 130 422 1 2.100 199 130 432 1 2.100

20 15 10 185 199 130 423 1 2.100 199 130 433 1 2.100

25 20 10 350 199 130 424 1 2.200 199 130 434 1 2.200
32 25 10 700 199 130 425 1 2.300 199 130 435 1 2.300
40 32 10 1000 199 130 426 1 2.600 199 130 436 1 2.600
50 40 10 1600 199 130 427 1 3.000 199 130 437 1 3.000

63 50 10 3100 199 130 428 1 3.800 199 130 438 1 3.800

75 65 10 5000 199 130 429 1 7.900 199 130 439 1 7.900
90 80 10 7000 199 130 430 1 10.600 199 130 440 1 10.600
110 100 10 11000 199 130 431 1 15.300 199 130 441 1 15.300

d D H H1 H2 H3 H5 L L1 L2 L3 L4 L5 L7 closest
[inch]
16 50 231 27 64 94 167 114 180 56 130 25 97 122 ∕8

3
20 50 231 27 64 94 167 124 180 56 130 25 97 122 1

∕2
25 58 240 30 73 94 167 144 180 65 150 25 97 122 3
∕4
32 68 240 36 73 94 167 154 180 71 160 25 97 122 1
40 84 251 44 84 94 167 174 180 85 180 45 97 122 1 1∕4
50 97 251 51 84 94 167 194 180 89 200 45 97 122 1 1∕2

63 124 273 64 106 94 167 224 180 101 230 45 97 122 2

75 166 346 85 156 94 190 284 180 136 290 70 98 122 2 1∕2
90 200 358 105 168 94 190 300 180 141 310 70 98 122 3
110 238 365 123 175 94 190 340 180 164 350 120 98 122 4

PF 3 39 695 632

87
Model:
• Voltage 100-230 V, 50-60 Hz
Option:
bar)
[l ⁄ min]
∕8 10 10 70 199 130 182 1 2.100 199 130 192 1 2.100

3

1
∕2 15 10 185 199 130 183 1 2.100 199 130 193 1 2.100
3
∕4 20 10 350 199 130 184 1 2.200 199 130 194 1 2.200
1 25 10 700 199 130 185 1 2.300 199 130 195 1 2.300
1 1∕4 32 10 1000 199 130 186 1 2.600 199 130 196 1 2.600
1 1∕2 40 10 1600 199 130 187 1 3.000 199 130 197 1 3.000

2 50 10 3100 199 130 188 1 3.800 199 130 198 1 3.800

2 1∕2 65 10 5000 199 130 189 1 7.800 199 130 199 1 7.800
3 80 10 7000 199 130 190 1 10.600 199 130 200 1 10.600
4 100 10 11000 199 130 191 1 15.200 199 130 201 1 15.200

Rp D H H1 H2 H3 H5 L L1 L2 L4 L5 L7 z
∕8 50 231 27 64 94 167 92 180 56 25 97 122 64

3

1
∕2 50 231 27 64 94 167 95 180 56 25 97 122 64
3
∕4 58 240 30 73 94 167 110 180 65 25 97 122 72
1 68 240 36 73 94 167 123 180 71 25 97 122 79
1 1∕4 84 251 44 84 94 167 146 180 85 45 97 122 94
1 1∕2 97 251 51 84 94 167 157 180 89 45 97 122 95

2 124 273 64 106 94 167 183 180 101 45 97 122 107

2 1∕2 166 346 85 156 94 190 233 180 136 70 98 122 144
3 200 358 105 168 94 190 254 180 141 70 98 122 151
4 238 365 123 175 94 190 301 180 164 120 98 122 174

PF 3 39 695 632

88
Model:
• Voltage 100-230 V, 50-60 Hz
Option:
bar)
[l ⁄ min]
75 65 10 5000 199 134 489 1 11.900 199 134 499 1 11.900

90 80 10 7000 199 134 490 1 15.400 199 134 500 1 15.400

110 100 10 11000 199 134 491 1 21.800 199 134 501 1 21.800

d D H H1 H2 H3 H5 H6 L L1 L2 L3 L4 L5 L6 L7
75 166 346 85 156 94 190 93 284 180 136 290 70 98 83 122

90 200 358 105 168 94 190 100 300 180 141 310 70 98 83 122
110 238 365 123 175 94 190 110 340 180 164 350 120 98 83 122

d L8
[mm] [mm]
75 66

90 66
110 66

PF 3 39 695 632

89
Model:
Option:
bar)
[l ⁄ min]
16 10 10 70 199 130 442 1 2.100 199 130 452 1 2.100

20 15 10 185 199 130 443 1 2.100 199 130 453 1 2.100

25 20 10 350 199 130 444 1 2.200 199 130 454 1 2.200
32 25 10 700 199 130 445 1 2.300 199 130 455 1 2.674
40 32 10 1000 199 130 446 1 2.600 199 130 456 1 2.600
50 40 10 1600 199 130 447 1 3.000 199 130 457 1 3.000

63 50 10 3100 199 130 448 1 3.800 199 130 458 1 3.800

75 65 10 5000 199 130 449 1 7.700 199 130 459 1 7.700
90 80 10 7000 199 130 450 1 10.400 199 130 460 1 9.825
110 100 10 11000 199 130 451 1 15.100 199 130 461 1 15.100

d D H H1 H2 H3 H5 L L1 L2 L4 L5 L7 z closest
[inch]
16 50 231 27 64 94 167 92 180 56 25 97 122 64 ∕8

3
20 50 231 27 64 94 167 95 180 56 25 97 122 64 1

∕2
25 58 240 30 73 94 167 110 180 65 25 97 122 72 3
∕4
32 68 240 36 73 94 167 123 180 71 25 97 122 79 1
40 84 251 44 84 94 167 146 180 85 45 97 122 94 1 1∕4
50 97 251 51 84 94 167 157 180 89 45 97 122 95 1 1∕2

63 124 273 64 106 94 167 183 180 101 45 97 122 107 2

75 166 346 85 156 94 190 233 180 136 70 98 122 144 2 1∕2
90 200 358 105 168 94 190 254 180 141 70 98 122 151 3
110 238 365 123 175 94 190 301 180 164 120 98 122 174 4

PF 3 39 695 632

90
Model:
Option:
bar)
[l ⁄ min]
16 10 10 70 199 130 462 1 2.100 199 130 472 1 2.100

20 15 10 185 199 130 463 1 2.100 199 130 473 1 2.100

25 20 10 350 199 130 464 1 2.200 199 130 474 1 2.200
32 25 10 700 199 130 465 1 2.300 199 130 475 1 2.300
40 32 10 1000 199 130 466 1 2.600 199 130 476 1 2.600
50 40 10 1600 199 130 467 1 3.000 199 130 477 1 3.000

63 50 10 3100 199 130 468 1 3.800 199 130 478 1 3.800

75 65 10 5000 199 130 469 1 7.900 199 130 479 1 7.900
90 80 10 7000 199 130 470 1 10.600 199 130 480 1 10.600
110 100 10 11000 199 130 471 1 15.300 199 130 481 1 15.300

d D H H1 H2 H3 H5 L L1 L2 L3 L4 L5 L7 closest
[inch]
16 50 231 27 64 94 167 114 180 56 0 25 97 122 ∕8

3
20 50 231 27 64 94 167 124 180 56 130 25 97 122 1

∕2
25 58 240 30 73 94 167 144 180 65 150 25 97 122 3
∕4
32 68 240 36 73 94 167 154 180 71 160 25 97 122 1
40 84 251 44 84 94 167 174 180 85 180 45 97 122 1 1∕4
50 97 251 51 84 94 167 194 180 89 200 45 97 122 1 1∕2

63 124 273 64 106 94 167 224 180 101 230 45 97 122 2

75 166 346 85 156 94 190 284 180 136 290 70 98 122 2 1∕2
90 200 358 105 168 94 190 300 180 141 310 70 98 122 3
110 238 365 123 175 94 190 340 180 164 350 120 98 122 4

PF 3 39 695 632

91
Model:
Option:
bar)
[l ⁄ min]
∕8 10 10 70 199 130 202 1 2.100 199 130 212 1 2.100

3

1
∕2 15 10 185 199 130 203 1 2.100 199 130 213 1 2.100
3
∕4 20 10 350 199 130 204 1 2.200 199 130 214 1 2.200
1 25 10 700 199 130 205 1 2.300 199 130 215 1 2.300
1 1∕4 32 10 1000 199 130 206 1 2.600 199 130 216 1 2.600
1 1∕2 40 10 1600 199 130 207 1 3.000 199 130 217 1 3.000

2 50 10 3100 199 130 208 1 3.800 199 130 218 1 3.800

2 1∕2 65 10 5000 199 130 209 1 7.800 199 130 219 1 7.800
3 80 10 7000 199 130 210 1 10.600 199 130 220 1 10.600
4 100 10 11000 199 130 211 1 15.200 199 130 221 1 15.200

Rp D H H1 H2 H3 H5 L L1 L2 L4 L5 L7 z
∕8 50 231 27 64 94 167 92 180 56 25 97 122 64

3

1
∕2 50 231 27 64 94 167 95 180 56 25 97 122 64
3
∕4 58 240 30 73 94 167 110 180 65 25 97 122 72
1 68 240 36 73 94 167 123 180 71 25 97 122 79
1 1∕4 84 251 44 84 94 167 146 180 85 45 97 122 94
1 1∕2 97 251 51 84 94 167 157 180 89 45 97 122 95

2 124 273 64 106 94 167 183 180 101 45 97 122 107

2 1∕2 166 346 85 156 94 190 233 180 136 70 98 122 144
3 200 358 105 168 94 190 254 180 141 70 98 122 151
4 238 365 123 175 94 190 301 180 164 120 98 122 174

PF 3 39 695 632

92
Model:
Option:
bar)
[l ⁄ min]
75 65 10 5000 199 134 509 1 11.900 199 134 519 1 11.900

90 80 10 7000 199 134 510 1 15.400 199 134 520 1 15.400

110 100 10 11000 199 134 511 1 21.800 199 134 521 1 21.800

75 166 346 85 156 94 190 93 284 180 136 290 70 98 83 122

90 200 358 105 168 94 190 100 300 180 141 310 70 98 83 122
110 238 365 123 175 94 190 110 340 180 164 350 120 98 83 122

d L8
[mm] [mm]
75 66

90 66
110 66

PF 3 39 695 632

93
185
Horizontal/T-port 100-230V
Model:
• Voltage 100-230 V, 50-60 Hz
• Basic position A-B-C opened, activated position B-C opened, see flow scheme
• Other positions possible by adjusting the limit switches
bar)
[l ⁄ min]
16 10 10 140 199 185 142 1 2.142 199 185 152 1 2.142

20 15 10 200 199 185 143 1 2.148 199 185 153 1 2.148

25 20 10 470 199 185 144 1 2.285 199 185 154 1 2.285
32 25 10 793 199 185 145 1 2.486 199 185 155 1 2.486
40 32 10 1290 199 185 146 1 2.939 199 185 156 1 2.939
50 40 10 1910 199 185 147 1 3.419 199 185 157 1 3.419
63 50 10 3100 199 185 148 1 4.867 199 185 158 1 4.867

16 50 231 28 64 94 167 8 109 180 73 36 25 97 83 122

20 50 231 28 64 94 167 8 112 180 73 36 25 97 83 122

25 58 240 32 73 94 167 8 131 180 86 43 25 97 83 122
32 68 240 36 73 94 167 8 151 180 99 50 25 97 83 122
40 84 251 45 84 94 167 9 181 180 120 60 45 97 83 122
50 97 251 51 84 94 167 9 205 180 137 69 45 97 83 122
63 124 273 65 106 94 167 9 261 180 179 89 45 97 83 122

d L8 M z z1 closest
[inch]
16 33 6 81 40 ∕8

3
20 33 6 81 40 1
∕2
25 33 6 94 47 3
∕4
32 33 6 107 54 1
40 33 8 130 65 1 1∕4
50 33 8 143 72 1 1∕2
63 33 8 185 92 2

PF 3 39 980 032

94
Horizontal/T-port 100-230V
Model:
• Voltage 100-230 V, 50-60 Hz
bar)
[l ⁄ min]
16 10 10 140 199 185 122 1 2.148 199 185 132 1 2.148

20 15 10 200 199 185 123 1 2.158 199 185 133 1 2.158

25 20 10 470 199 185 124 1 2.301 199 185 134 1 2.301
32 25 10 793 199 185 125 1 2.512 199 185 135 1 2.512
40 32 10 1290 199 185 126 1 2.961 199 185 136 1 2.961
50 40 10 1910 199 185 127 1 3.487 199 185 137 1 3.487
63 50 10 3100 199 185 128 1 5.004 199 185 138 1 5.004

16 50 231 28 64 94 167 8 131 180 73 36 25 97 83 122

20 50 231 28 64 94 167 8 141 180 73 36 25 97 83 122

25 58 240 32 73 94 167 8 165 180 86 43 25 97 83 122
32 68 240 36 73 94 167 8 182 180 99 50 25 97 83 122
40 84 251 45 84 94 167 9 209 180 120 60 45 97 83 122
50 97 251 51 84 94 167 9 242 180 137 69 45 97 83 122
63 124 273 65 106 94 167 9 302 180 179 89 45 97 83 122

d L8 M closest
[mm] [mm] inch
[inch]
16 33 6 ∕8

3
20 33 6 1
∕2
25 33 6 3
∕4
32 33 6 1
40 33 8 1 1∕4
50 33 8 1 1∕2
63 33 8 2

PF 3 39 980 032

95
Horizontal/T-port 24V
Model:
bar)
[l ⁄ min]
16 10 10 140 199 185 322 1 2.142 199 185 332 1 2.142

20 15 10 200 199 185 323 1 2.148 199 185 333 1 2.148

25 20 10 470 199 185 324 1 2.285 199 185 334 1 2.285
32 25 10 793 199 185 325 1 2.486 199 185 335 1 2.486
40 32 10 1290 199 185 326 1 2.939 199 185 336 1 2.939
50 40 10 1910 199 185 327 1 3.419 199 185 337 1 3.419
63 50 10 3100 199 185 328 1 4.867 199 185 338 1 4.867

16 50 231 28 64 94 167 8 109 180 73 36 25 97 83 122

20 50 231 28 64 94 167 8 112 180 73 36 25 97 83 122

25 58 240 32 73 94 167 8 131 180 86 43 25 97 83 122
32 68 240 36 73 94 167 8 151 180 99 50 25 97 83 122
40 84 251 45 84 94 167 9 181 180 120 60 45 97 83 122
50 97 251 51 84 94 167 9 205 180 137 69 45 97 83 122
63 124 273 65 106 94 167 9 261 180 179 89 45 97 83 122

d L8 M z z1 closest
[inch]
16 33 6 81 40 ∕8

3
20 33 6 81 40 1
∕2
25 33 6 94 47 3
∕4
32 33 6 107 54 1
40 33 8 130 65 1 1∕4
50 33 8 143 72 1 1∕2
63 33 8 185 92 2

PF 3 39 980 032

96
Horizontal/T-port 24V
Model:
bar)
[l ⁄ min]
16 10 10 140 199 185 302 1 2.148 199 185 312 1 2.148

20 15 10 200 199 185 303 1 2.158 199 185 313 1 2.158

25 20 10 470 199 185 304 1 2.301 199 185 314 1 2.301
32 25 10 793 199 185 305 1 2.512 199 185 315 1 2.512
40 32 10 1290 199 185 306 1 2.961 199 185 316 1 2.961
50 40 10 1910 199 185 307 1 3.487 199 185 317 1 3.487
63 50 10 3100 199 185 308 1 5.004 199 185 318 1 5.004

16 50 231 28 64 94 167 8 131 180 73 36 25 97 83 122

20 50 231 28 64 94 167 8 141 180 73 36 25 97 83 122

25 58 240 32 73 94 167 8 165 180 86 43 25 97 83 122
32 68 240 36 73 94 167 8 182 180 99 50 25 97 83 122
40 84 251 45 84 94 167 9 209 180 120 60 45 97 83 122
50 97 251 51 84 94 167 9 242 180 137 69 45 97 83 122
63 124 273 65 106 94 167 9 302 180 179 89 45 97 83 122

d L8 M closest
[mm] [mm] inch
[inch]
16 33 6 ∕8

3
20 33 6 1
∕2
25 33 6 3
∕4
32 33 6 1
40 33 8 1 1∕4
50 33 8 1 1∕2
63 33 8 2

PF 3 39 980 032

97
Horizontal/L-port 100-230V
Model:
• Voltage 100-230 V, 50-60 Hz
• Basic position A-C opened, activated position B-C opened, see flow scheme
bar)
[l ⁄ min]
16 10 10 50 199 185 102 1 2.143 199 185 112 1 2.143

20 15 10 75 199 185 103 1 2.149 199 185 113 1 2.149

25 20 10 150 199 185 104 1 2.287 199 185 114 1 2.287
32 25 10 280 199 185 105 1 2.493 199 185 115 1 2.493
40 32 10 480 199 185 106 1 2.950 199 185 116 1 2.950
50 40 10 620 199 185 107 1 3.441 199 185 117 1 3.441
63 50 10 1230 199 185 108 1 4.916 199 185 118 1 4.916

16 50 231 28 64 94 167 8 109 180 73 36 25 97 83 122

20 50 231 28 64 94 167 8 112 180 73 36 25 97 83 122

25 58 240 32 73 94 167 8 131 180 86 43 25 97 83 122
32 68 240 36 73 94 167 8 151 180 99 50 25 97 83 122
40 84 251 45 84 94 167 9 181 180 120 60 45 97 83 122
50 97 251 51 84 94 167 9 205 180 137 69 45 97 83 122
63 124 273 65 106 94 167 9 261 180 179 89 45 97 83 122

d L8 M z z1 closest
[inch]
16 33 6 81 40 ∕8

3
20 33 6 81 40 1
∕2
25 33 6 94 47 3
∕4
32 33 6 107 54 1
40 33 8 130 65 1 1∕4
50 33 8 143 72 1 1∕2
63 33 8 185 92 2

PF 3 39 980 032

98
Horizontal/L-port 100-230V
Model:
• Voltage 100-230 V, 50-60 Hz
bar)
[l ⁄ min]
16 10 10 50 199 185 082 1 2.149 199 185 092 1 2.149

20 15 10 75 199 185 083 1 2.159 199 185 093 1 2.159

25 20 10 150 199 185 084 1 2.303 199 185 094 1 2.303
32 25 10 280 199 185 085 1 2.519 199 185 095 1 2.519
40 32 10 480 199 185 086 1 2.973 199 185 096 1 2.973
50 40 10 620 199 185 087 1 3.510 199 185 097 1 3.510
63 50 10 1230 199 185 088 1 5.053 199 185 098 1 5.053

16 50 231 28 64 94 167 8 131 180 73 36 25 97 83 122

20 50 231 28 64 94 167 8 141 180 73 36 25 97 83 122

25 58 240 32 73 94 167 8 165 180 86 43 25 97 83 122
32 68 240 36 73 94 167 8 182 180 99 50 25 97 83 122
40 84 251 45 84 94 167 9 209 180 120 60 45 97 83 122
50 97 251 51 84 94 167 9 242 180 137 69 45 97 83 122
63 124 273 65 106 94 167 9 302 180 179 89 45 97 83 122

d L8 M closest
[mm] [mm] inch
[inch]
16 33 6 ∕8

3
20 33 6 1
∕2
25 33 6 3
∕4
32 33 6 1
40 33 8 1 1∕4
50 33 8 1 1∕2
63 33 8 2

PF 3 39 980 032

99
Horizontal/L-port 24V
Model:
bar)
[l ⁄ min]
16 10 10 50 199 185 262 1 2.143 199 185 272 1 2.143

20 15 10 75 199 185 263 1 2.149 199 185 273 1 2.149

25 20 10 150 199 185 264 1 2.287 199 185 274 1 2.287
32 25 10 280 199 185 265 1 2.493 199 185 275 1 2.493
40 32 10 480 199 185 266 1 2.950 199 185 276 1 2.950
50 40 10 620 199 185 267 1 3.766 199 185 277 1 3.441
63 50 10 1230 199 185 268 1 4.916 199 185 278 1 4.916

16 50 231 28 64 94 167 8 109 180 73 36 25 97 83 122

20 50 231 28 64 94 167 8 112 180 73 36 25 97 83 122

25 58 240 32 73 94 167 8 131 180 86 43 25 97 83 122
32 68 240 36 73 94 167 8 151 180 99 50 25 97 83 122
40 84 251 45 84 94 167 9 181 180 120 60 45 97 83 122
50 97 251 51 84 94 167 9 205 180 137 69 45 97 83 122
63 124 273 65 106 94 167 9 261 180 179 89 45 97 83 122

d L8 M z z1 closest
[inch]
16 33 6 81 40 ∕8

3
20 33 6 81 40 1
∕2
25 33 6 94 47 3
∕4
32 33 6 107 54 1
40 33 8 130 65 1 1∕4
50 33 8 143 72 1 1∕2
63 33 8 185 92 2

PF 3 39 980 032

100
Horizontal/L-port 24V
Model:
bar)
[l ⁄ min]
16 10 10 50 199 185 282 1 2.149 199 185 292 1 2.149

20 15 10 75 199 185 283 1 2.159 199 185 293 1 2.159

25 20 10 150 199 185 284 1 2.303 199 185 294 1 2.303
32 25 10 280 199 185 285 1 2.519 199 185 295 1 2.519
40 32 10 480 199 185 286 1 2.973 199 185 296 1 2.973
50 40 10 620 199 185 287 1 3.510 199 185 297 1 3.510
63 50 10 1230 199 185 288 1 5.053 199 185 298 1 5.053

16 50 231 28 64 94 167 8 131 180 73 36 25 97 83 122

20 50 231 28 64 94 167 8 141 180 73 36 25 97 83 122

25 58 240 32 73 94 167 8 165 180 86 43 25 97 83 122
32 68 240 36 73 94 167 8 182 180 99 50 25 97 83 122
40 84 251 45 84 94 167 9 209 180 120 60 45 97 83 122
50 97 251 51 84 94 167 9 242 180 137 69 45 97 83 122
63 124 273 65 106 94 167 9 302 180 179 89 45 97 83 122

d L8 M closest
[mm] [mm] inch
[inch]
16 33 6 ∕8

3
20 33 6 1
∕2
25 33 6 3
∕4
32 33 6 1
40 33 8 1 1∕4
50 33 8 1 1∕2
63 33 8 2

PF 3 39 980 032

101
104
Ball valve type 104 PVC-C 100-230V With solvent cement
sockets metric
Model:
• Voltage 100-230 V, 50-60 Hz
d DN PN kv-value EPDM FPM H L Type of ac- B
[mm] [mm] [bar] (Δp=1 bar) Code Code [mm] [mm] tuator [mm]
[l ⁄ min]
16 10 10 70 199 104 102 199 104 112 194 178.5 10Nm 50

20 15 10 185 199 104 103 199 104 113 194 178.5 10Nm 50
25 20 10 350 199 104 104 199 104 114 207 186.0 10Nm 58
32 25 10 700 199 104 105 199 104 115 217 192.5 10Nm 68
40 32 10 1000 199 104 106 199 104 116 236 204.5 10Nm 84
50 40 10 1600 199 104 107 199 104 117 275 208.5 20Nm 97
63 50 10 3100 199 104 108 199 104 118 307 221.5 20Nm 124

Ball valve type 104 PVC-C 24V With solvent cement sock-
ets metric
d DN PN kv-value EPDM FPM H L Type of ac- B
[mm] [mm] [bar] (Δp=1 bar) Code Code [mm] [mm] tuator [mm]
[l ⁄ min]
16 10 10 70 199 104 142 199 104 152 194 178.5 10Nm 50

20 15 10 185 199 104 143 199 104 153 194 178.5 10Nm 50
25 20 10 350 199 104 144 199 104 154 207 186.0 10Nm 58
32 25 10 700 199 104 145 199 104 155 217 192.5 10Nm 68
40 32 10 1000 199 104 146 199 104 156 236 204.5 10Nm 84
50 40 10 1600 199 104 147 199 104 157 275 208.5 20Nm 97
63 50 10 3100 199 104 148 199 104 158 307 221.5 20Nm 124

102
Notes
103
Copiable
Configurator GF ball valve type 546 PVC-C
You will find a large selection of different

Ball valve versions in our range of products. New system
A01 Ball valve 546
elements also provide you with new opportuni-
Material ties for use. In order for us to supply exactly the
B02 PVC-C
ball valve you need for you application, we have
created a selection menu for you.
Dimension
C05 DN 10 3/8‘‘
C06 DN 15 1/2‘‘
C07 DN 20 3/4‘‘ We supply what you put together.
C08 DN 25 1‘‘
C09 DN 32 1 1/4‘‘
C10 DN 40 1 1/2‘‘
C11 DN 50 2‘‘
C12 DN 65 2 1/2"
C13 DN 80 3"
C14 DN 100 4"
Version
D01 Standard, PTFE ball seal
D02 Oilfree, PTFE ball seal (only with specific connecting parts)
D03 Silicon-free, PTFE ball seal for inch ASTM (only with specific connecting parts)
D04 Silicon-free, PVDF ball seal for metric (only with specific connecting parts)
Seals
E01 EPDM seals
E02 FPM seals
Threaded inserts
F01 Without threaded inserts
F02 With threaded inserts
Connecting parts
G11 PVC-C Cement socket metric
G12 PVC-C Cement socket JIS
G13 PVC-C Cement socket inch ASTM
G14 PVC-C Cement spigot metric
G15 PVC-C Threaded socket Rp
G16 PVC-C Threaded socket Rp reinforced (DN10-50)
G17 PVC-C Threaded socket NPT
G40 PE-100 Butt fusion metric
G41 PE-100 Butt fusion spigot SDR11 metric
G42 PE-100 Butt fusion spigot SDR17.6 metric (DN65-100)
G43 PE-100 Butt fusion spigot long SDR11 metric
G72 Backing flange PP-steel metric
G73 Backing flange PP-steel inch ANSI
G81 PVC-C Valve end blank

Multi-functional module
I01 No multi-functional module
I02 Empty module
I03 Module with 2 limit switches Ag, Ni
I04 Module with 2 limit switches Au
I05 Module with 2 inductive switches Namur
I06 Module with 2 inductive switches PNP
I07 Module with 2 inductive switches NPN
Lever
K01 Standard handle red
K02 Standard handle black
K11 Multi-functional handle red
Mounting plate
L01 without mounting plate
L02 with mounting plate
A01 B02 C D E F G G I K L
left right
104
Copiable
GF ball valve type 546 with pneumatic actuator
It’s so easy to actuate

the type 546:
With the configurator, you have a choice of
new pneumatic actuators PA11 and PA21 in
2 optimized sizes including a large range of
accessories.
We supply what you put together.
Pneumatic actuators PA11/PA21

P01 Fail safe to close PA11/PA21
P02 Fail safe to open PA11/21
P03 Double acting PA11/21
P30 Fail safe to close PA30/90
P31 Fail safe to open PA30/90
P32 Double acting PA30/90
Manual override
Q01 Without manual override
Q02 With manual override
Stroke limiter
R01 Without stroke limiter
R02 With stroke limiter
P Q R
105
Ball valves pneumatic
230
Ball valve type 230 PVC-C FC (Fail safe to close)
Without manual override
Model:
• Control time 90°<) 1-2 s
• Assignment of actuators: PA11 (DN10/15-25), PA21 (DN32-50), PA30 (DN65), PA40
(DN80), PA40 (DN100)
Option:
bar)
[l ⁄ min]
16 10 10 70 199 230 522 1 1.159 199 230 532 1 1.159

20 15 10 185 199 230 523 1 1.553 199 230 533 1 1.159

25 20 10 350 199 230 524 1 1.276 199 230 534 1 1.276
32 25 10 700 199 230 525 1 1.400 199 230 535 1 1.262
40 32 10 1000 199 230 526 1 2.451 199 230 536 1 2.226
50 40 10 1600 199 230 527 1 2.773 199 230 537 1 2.773

63 50 10 3100 199 230 528 1 3.250 199 230 538 1 3.631

75 65 10 5000 199 230 529 1 8.100 199 230 539 1 8.100
90 80 10 7000 199 230 530 1 10.800 199 230 540 1 10.800
110 100 10 11000 199 230 531 1 16.500 199 230 541 1 16.500

d D H H1 H2 H5 L L1 L2 L4 L5 L6 L7 z closest
[inch]
16 50 159 27 62 77 92 194 56 25 261 76 48 64 ∕8

3
20 50 159 27 62 77 95 194 56 25 261 76 48 64 1

∕2
25 58 168 30 71 77 110 194 65 25 261 76 48 72 3
∕4
32 68 168 36 71 77 123 194 71 25 261 76 48 79 1
40 84 202 44 84 99 146 224 85 45 305 95 59 94 1 1∕4
50 97 202 51 84 99 157 224 89 45 305 95 59 95 1 1∕2

63 124 225 64 106 99 183 224 101 45 305 95 59 107 2

75 166 262 85 156 70 233 136 70 276 65 144 2 1∕2
90 200 281 105 168 78 254 141 70 341 72 151 3
110 238 292 123 175 86 301 164 120 369 80 174 4

PF 3 39 696 032

106
Ball valve type 230 PVC-C FC (fail safe to close)
With manual override
Model:
• Built on with pneumatic actuator PA11 (DN10/15-25), PA21 (DN32-50)
Option:
bar)
[l ⁄ min]
16 10 10 70 199 230 402 1 1.459 199 230 412 1 1.459

20 15 10 185 199 230 403 1 1.459 199 230 413 1 1.459

25 20 10 350 199 230 404 1 1.576 199 230 414 1 1.576
32 25 10 700 199 230 405 1 1.700 199 230 415 1 1.496
40 32 10 1000 199 230 406 1 2.477 199 230 416 1 2.751
50 40 10 1600 199 230 407 1 3.073 199 230 417 1 2.736
63 50 10 3100 199 230 408 1 4.471 199 230 418 1 3.530

d D H H1 H2 H3 H4 H5 L L1 L2 L4 L5 L6 L7 z
16 50 230 27 62 168 40 77 92 194 56 25 261 76 48 64

20 50 230 27 62 168 40 77 95 194 56 25 261 76 48 64

25 58 239 30 71 168 40 77 110 194 65 25 261 76 48 72
32 68 239 36 71 168 40 77 123 194 71 25 261 76 48 79
40 84 271 44 84 187 51 99 146 224 85 45 305 95 59 94
50 97 271 51 84 187 51 99 157 224 89 45 305 95 59 95
63 124 293 64 106 187 51 99 183 224 101 45 305 95 59 107

d closest
[mm] inch
[inch]
16 ∕8

3
20 1
∕2
25 3
∕4
32 1
40 1 1∕4
50 1 1∕2
63 2

PF 3 39 696 032

107
Model:
(DN80), PA40 (DN100)
Option:
bar)
[l ⁄ min]
16 10 10 70 199 230 542 1 1.159 199 230 552 1 1.159

20 15 10 185 199 230 543 1 1.159 199 230 553 1 1.159

25 20 10 350 199 230 544 1 1.276 199 230 554 1 1.276
32 25 10 700 199 230 545 1 1.400 199 230 555 1 1.400
40 32 10 1000 199 230 546 1 2.451 199 230 556 1 2.451
50 40 10 1600 199 230 547 1 2.773 199 230 557 1 2.773

63 50 10 3100 199 230 548 1 3.314 199 230 558 1 3.631

75 65 10 5000 199 230 549 1 8.300 199 230 559 1 8.300
90 80 10 7000 199 230 550 1 11.000 199 230 560 1 11.000
110 100 10 11000 199 230 551 1 16.700 199 230 561 1 16.700

d D H H1 H2 H5 L L1 L2 L3 L4 L5 L6 L7 closest
[inch]
16 50 159 27 62 77 114 194 56 0 25 261 76 48 ∕8

3
20 50 159 27 62 77 124 194 56 130 25 261 76 48 1

∕2
25 58 168 30 71 77 144 194 65 150 25 261 76 48 3
∕4
32 68 168 36 71 77 154 194 71 160 25 261 76 48 1
40 84 202 44 84 99 174 224 85 180 45 305 95 59 1 1∕4
50 97 202 51 84 99 194 224 89 200 45 305 95 59 1 1∕2

63 124 225 64 106 99 224 224 101 230 45 305 95 59 2

75 166 262 85 156 70 284 136 290 70 276 65 2 1∕2
90 200 281 105 168 78 300 141 310 70 341 72 3
110 238 292 123 175 86 340 164 350 120 369 80 4

PF 3 39 696 032

108
Model:
Option:
bar)
[l ⁄ min]
16 10 10 70 199 230 422 1 1.459 199 230 432 1 1.459

20 15 10 185 199 230 423 1 1.459 199 230 433 1 1.459

25 20 10 350 199 230 424 1 1.576 199 230 434 1 1.576
32 25 10 700 199 230 425 1 1.700 199 230 435 1 1.700
40 32 10 1000 199 230 426 1 2.751 199 230 436 1 2.751
50 40 10 1600 199 230 427 1 3.073 199 230 437 1 3.073
63 50 10 3100 199 230 428 1 3.931 199 230 438 1 3.931

16 50 159 27 62 168 40 77 114 194 56 130 25 261 76 48

20 50 159 27 62 168 40 77 124 194 56 130 25 261 76 48

25 58 168 30 71 168 40 77 144 194 65 150 25 261 76 48
32 68 168 36 71 168 40 77 154 194 71 160 25 261 76 48
40 84 202 44 84 187 51 99 174 224 85 180 45 305 95 59
50 97 202 51 84 187 51 99 194 224 89 200 45 305 95 59
63 124 225 64 106 187 51 99 224 224 101 230 45 305 95 59

d closest
[mm] inch
[inch]
16 ∕8

3
20 1
∕2
25 3
∕4
32 1
40 1 1∕4
50 1 1∕2
63 2

PF 3 39 696 032

109
Model:
(DN80), PA40 (DN100)
Option:
bar)
[l ⁄ min]
∕8 10 10 70 199 230 872 1 1.200 199 230 892 1 1.200

3

1
∕2 15 10 185 199 230 873 1 1.200 199 230 893 1 1.200
3
∕4 20 10 350 199 230 874 1 1.300 199 230 894 1 1.300
1 25 10 700 199 230 875 1 1.400 199 230 895 1 1.400
1 1∕4 32 10 1000 199 230 876 1 2.500 199 230 896 1 2.500
1 1∕2 40 10 1600 199 230 877 1 2.800 199 230 897 1 2.800

2 50 10 3100 199 230 878 1 3.700 199 230 898 1 3.700

2 1∕2 65 10 5000 199 230 879 1 8.200 199 230 899 1 8.200
3 80 10 7000 199 230 880 1 11.000 199 230 900 1 11.000
4 100 10 11000 199 230 881 1 16.500 199 230 901 1 16.500

Rp D H H1 H2 H5 L L1 L2 L4 L5 L6 L7 z
∕8 50 159 27 62 77 92 194 56 25 261 76 48 64

3

1
∕2 50 159 27 62 77 95 194 56 25 261 76 48 64
3
∕4 58 168 30 71 77 110 194 65 25 261 76 48 72
1 68 168 36 71 77 123 194 71 25 261 76 48 79
1 1∕4 84 202 44 84 99 146 224 85 45 305 95 59 94
1 1∕2 97 202 51 84 99 157 224 89 45 305 95 59 95

2 124 225 64 106 99 183 224 101 45 305 95 59 107

2 1∕2 166 262 85 156 70 233 136 70 276 65 144
3 200 281 105 168 78 254 141 70 341 72 151
4 238 292 123 175 86 301 164 120 369 80 174

PF 3 39 696 032

110
Model:
Option:
bar)
[l ⁄ min]
∕8 10 10 70 199 230 752 1 1.500 199 230 772 1 1.500

3

1
∕2 15 10 185 199 230 753 1 1.500 199 230 773 1 1.500
3
∕4 20 10 350 199 230 754 1 1.600 199 230 774 1 1.600
1 25 10 700 199 230 755 1 1.700 199 230 775 1 1.700
1 1∕4 32 10 1000 199 230 756 1 2.800 199 230 776 1 2.800
1 1∕2 40 10 1600 199 230 757 1 3.100 199 230 777 1 3.100
2 50 10 3100 199 230 758 1 4.000 199 230 778 1 4.000

Rp D H H1 H2 H3 H4 H5 L L1 L2 L4 L5 L6 L7 z
∕8 50 159 27 62 168 40 77 92 194 56 25 261 76 48 64

3

1
∕2 50 159 27 62 168 40 77 95 194 56 25 261 76 48 64
3
∕4 58 168 30 71 168 40 77 110 194 65 25 261 76 48 72
1 68 168 36 71 168 40 77 123 194 71 25 261 76 48 79
1 1∕4 84 202 44 84 187 51 99 146 224 85 45 305 95 59 94
1 1∕2 97 202 51 84 187 51 99 157 224 89 45 305 95 59 95
2 124 225 64 106 187 51 99 183 224 101 45 305 95 59 107

PF 3 39 696 032

111
Model:
(DN80), PA40 (DN100)
Option:
bar)
[l ⁄ min]
75 65 10 5000 199 234 609 1 12.300 199 234 619 1 12.300

90 80 10 7000 199 234 610 1 15.800 199 234 620 1 15.800

110 100 10 11000 199 234 611 1 23.200 199 234 621 1 23.200

d D H H1 H2 H5 H6 L L2 L3 L4 L5 L6
75 166 262 85 156 70 93 284 136 290 70 276 65

90 200 281 105 168 78 100 300 141 310 70 341 72

110 238 292 123 175 86 110 340 164 350 120 369 80

PF 3 39 696 032

112
Ball valve type 230 PVC-C FO (Fail safe to open)
Model:
(DN80), PA40 (DN100)
Option:
bar)
[l ⁄ min]
16 10 10 70 199 230 562 1 1.159 199 230 572 1 1.159

20 15 10 185 199 230 563 1 1.159 199 230 573 1 1.159

25 20 10 350 199 230 564 1 1.276 199 230 574 1 1.276
32 25 10 700 199 230 565 1 1.400 199 230 575 1 1.400
40 32 10 1000 199 230 566 1 2.451 199 230 576 1 2.451
50 40 10 1600 199 230 567 1 2.773 199 230 577 1 2.773

63 50 10 3100 199 230 568 1 3.631 199 230 578 1 3.631

75 65 10 5000 199 230 569 1 8.100 199 230 579 1 8.100
90 80 10 7000 199 230 570 1 10.800 199 230 580 1 10.800
110 100 10 11000 199 230 571 1 16.500 199 230 581 1 16.500

[inch]
16 50 159 27 62 77 92 194 56 25 261 76 48 64 ∕8

3
20 50 159 27 62 77 95 194 56 25 261 76 48 64 1

∕2
25 58 168 30 71 77 110 194 65 25 261 76 48 72 3
∕4
32 68 168 36 71 77 123 194 71 25 261 76 48 79 1
40 84 202 44 84 99 146 224 85 45 305 95 59 94 1 1∕4
50 97 202 51 84 99 157 224 89 45 305 95 59 95 1 1∕2

63 124 225 64 106 99 183 224 101 45 305 95 59 107 2

75 166 262 85 156 70 233 136 70 276 65 144 2 1∕2
90 200 281 105 168 78 254 141 70 341 72 151 3
110 238 292 123 175 86 301 164 120 369 80 174 4

PF 3 39 696 032

113
Model:
Option:
bar)
[l ⁄ min]
16 10 10 70 199 230 442 1 1.459 199 230 452 1 1.149

20 15 10 185 199 230 443 1 1.459 199 230 453 1 1.459

25 20 10 350 199 230 444 1 1.576 199 230 454 1 1.576
32 25 10 700 199 230 445 1 1.700 199 230 455 1 1.700
40 32 10 1000 199 230 446 1 2.751 199 230 456 1 2.751
50 40 10 1600 199 230 447 1 3.073 199 230 457 1 3.073
63 50 10 3100 199 230 448 1 3.931 199 230 458 1 3.931

16 50 230 27 62 168 40 77 92 194 56 25 261 76 48 64

20 50 230 27 62 168 40 77 95 194 56 25 261 76 48 64

25 58 239 30 71 168 40 77 110 194 65 25 261 76 48 72
32 68 239 36 71 168 40 77 123 194 71 25 261 76 48 79
40 84 271 44 84 187 51 99 146 224 85 45 305 95 59 94
50 97 271 51 84 187 51 99 157 224 89 45 305 95 59 95
63 124 293 64 106 187 51 99 183 224 101 45 305 95 59 107

d closest
[mm] inch
[inch]
16 ∕8

3
20 1
∕2
25 3
∕4
32 1
40 1 1∕4
50 1 1∕2
63 2

PF 3 39 696 032

114
Model:
(DN80), PA40 (DN100)
Option:
bar)
[l ⁄ min]
16 10 10 70 199 230 582 1 1.159 199 230 592 1 1.159

20 15 10 185 199 230 583 1 1.159 199 230 593 1 1.159

25 20 10 350 199 230 584 1 1.276 199 230 594 1 1.276
32 25 10 700 199 230 585 1 1.400 199 230 595 1 1.400
40 32 10 1000 199 230 586 1 2.451 199 230 596 1 2.451
50 40 10 1600 199 230 587 1 2.773 199 230 597 1 2.773

63 50 10 3100 199 230 588 1 3.631 199 230 598 1 3.631

75 65 10 5000 199 230 589 1 8.300 199 230 599 1 8.300
90 80 10 7000 199 230 590 1 11.000 199 230 600 1 11.000
110 100 10 11000 199 230 591 1 16.700 199 230 601 1 16.700

[inch]
16 50 159 27 62 77 114 194 56 130 25 261 76 48 ∕8

3
20 50 159 27 62 77 124 194 56 130 25 261 76 48 1

∕2
25 58 168 30 71 77 144 194 65 150 25 261 76 48 3
∕4
32 68 168 36 71 77 154 194 71 160 25 261 76 48 1
40 84 202 44 84 99 174 224 85 180 45 305 95 59 1 1∕4
50 97 202 51 84 99 194 224 89 200 45 305 95 59 1 1∕2

63 124 225 64 106 99 224 224 101 230 45 305 95 59 2

75 166 262 85 156 70 284 136 290 70 276 65 2 1∕2
90 200 281 105 168 78 300 141 310 70 341 72 3
110 238 292 123 175 86 340 164 350 120 369 80 4

PF 3 39 696 032

115
Model:
Option:
bar)
[l ⁄ min]
16 10 10 70 199 230 462 1 1.459 199 230 472 1 1.459

20 15 10 185 199 230 463 1 1.459 199 230 473 1 1.459

25 20 10 350 199 230 464 1 1.576 199 230 474 1 1.576
32 25 10 700 199 230 465 1 1.700 199 230 475 1 1.700
40 32 10 1000 199 230 466 1 2.751 199 230 476 1 2.751
50 40 10 1600 199 230 467 1 3.073 199 230 477 1 3.073
63 50 10 3100 199 230 468 1 3.931 199 230 478 1 3.931

16 50 159 27 62 168 40 77 114 194 56 130 25 261 76 48

20 50 159 27 62 168 40 77 124 194 56 130 25 261 76 48

25 58 168 30 71 168 40 77 144 194 65 150 25 261 76 48
32 68 168 36 71 168 40 77 154 194 71 160 25 261 76 48
40 84 202 44 84 187 51 99 174 224 85 180 45 305 95 59
50 97 202 51 84 187 51 99 194 224 89 200 45 305 95 59
63 124 225 64 106 187 51 99 224 224 101 230 45 305 95 59

d closest
[mm] inch
[inch]
16 ∕8

3
20 1
∕2
25 3
∕4
32 1
40 1 1∕4
50 1 1∕2
63 2

PF 3 39 696 032

116
Model:
(DN80), PA40 (DN100)
Option:
bar)
[l ⁄ min]
∕8 10 10 70 199 230 912 1 1.200 199 230 932 1 1.200

3

1
∕2 15 10 185 199 230 913 1 1.200 199 230 933 1 1.200
3
∕4 20 10 350 199 230 914 1 1.300 199 230 934 1 1.300
1 25 10 700 199 230 915 1 1.400 199 230 935 1 1.400
1 1∕4 32 10 1000 199 230 916 1 2.500 199 230 936 1 2.500
1 1∕2 40 10 1600 199 230 917 1 2.800 199 230 937 1 2.800

2 50 10 3100 199 230 918 1 3.700 199 230 938 1 3.700

2 1∕2 65 10 5000 199 230 919 1 8.200 199 230 939 1 8.200
3 80 10 7000 199 230 920 1 11.000 199 230 940 1 11.000
4 100 10 11000 199 230 921 1 16.500 199 230 941 1 16.500

∕8 50 159 27 62 77 92 194 56 25 261 76 48 64

3

1
∕2 50 159 27 62 77 95 194 56 25 261 76 48 64
3
∕4 58 168 30 71 77 110 194 65 25 261 76 48 72
1 68 168 36 71 77 123 194 71 25 261 76 48 79
1 1∕4 84 202 44 84 99 146 224 85 45 305 95 59 94
1 1∕2 97 202 51 84 99 157 224 89 45 305 95 59 95

2 124 225 64 106 99 183 224 101 45 305 95 59 107

2 1∕2 166 262 85 156 70 233 136 70 276 65 144
3 200 281 105 168 78 254 141 70 341 72 151
4 238 292 123 175 86 301 164 120 369 80 174

PF 3 39 696 032

117
Model:
Option:
bar)
[l ⁄ min]
∕8 10 10 70 199 230 792 1 1.500 199 230 812 1 1.500

3

1
∕2 15 10 185 199 230 793 1 1.500 199 230 813 1 1.500
3
∕4 20 10 350 199 230 794 1 1.600 199 230 814 1 1.600
1 25 10 700 199 230 795 1 1.700 199 230 815 1 1.700
1 1∕4 32 10 1000 199 230 796 1 2.800 199 230 816 1 2.800
1 1∕2 40 10 1600 199 230 797 1 3.100 199 230 817 1 3.100
2 50 10 3100 199 230 798 1 4.000 199 230 818 1 4.000

∕8 50 159 27 62 168 40 77 92 194 56 25 261 76 48 64

3

1
∕2 50 159 27 62 168 40 77 95 194 56 25 261 76 48 64
3
∕4 58 168 30 71 168 40 77 110 194 65 25 261 76 48 72
1 68 168 36 71 168 40 77 123 194 71 25 261 76 48 79
1 1∕4 84 202 44 84 187 51 99 146 224 85 45 305 95 59 94
1 1∕2 97 202 51 84 187 51 99 157 224 89 45 305 95 59 95
2 124 225 64 106 187 51 99 183 224 101 45 305 95 59 107

PF 3 39 696 032

118
Model:
(DN80), PA40 (DN100)
Option:
bar)
[l ⁄ min]
75 65 10 5000 199 234 629 1 12.300 199 234 639 1 12.300

90 80 10 7000 199 234 630 1 15.800 199 234 640 1 15.800

110 100 10 11000 199 234 631 1 23.200 199 234 641 1 23.200

d D H H1 H2 H5 H6 L L2 L3 L4 L5 L6
75 166 262 85 156 70 93 284 136 290 70 276 65

90 200 281 105 168 78 100 300 141 310 70 341 72

110 238 292 123 175 86 110 340 164 350 120 369 80

PF 3 39 696 032

119
Ball valve type 230 PVC-C DA (Double acting)
Model:
(DN80), PA45 (DN100)
Option:
bar)
[l ⁄ min]
16 10 10 70 199 230 602 1 1.159 199 230 612 1 1.159

20 15 10 185 199 230 603 1 1.159 199 230 613 1 1.159

25 20 10 350 199 230 604 1 1.276 199 230 614 1 1.276
32 25 10 700 199 230 605 1 1.400 199 230 615 1 1.400
40 32 10 1000 199 230 606 1 2.451 199 230 616 1 1.738
50 40 10 1600 199 230 607 1 2.773 199 230 617 1 1.991

63 50 10 3100 199 230 608 1 3.631 199 230 618 1 3.631

75 65 10 5000 199 230 609 1 7.000 199 230 619 1 7.000
90 80 10 7000 199 230 610 1 10.200 199 230 620 1 10.200
110 100 10 11000 199 230 611 1 14.700 199 230 621 1 14.700

[inch]
16 50 159 27 62 77 92 194 56 25 261 76 48 64 ∕8

3
20 50 159 27 62 77 95 194 56 25 261 76 48 64 1

∕2
25 58 168 30 71 77 110 194 65 25 261 76 48 72 3
∕4
32 68 168 36 71 77 123 194 71 25 261 76 48 79 1
40 84 202 44 84 99 146 224 85 45 305 95 59 94 1 1∕4
50 97 202 51 84 99 157 224 89 45 305 95 59 95 1 1∕2

63 124 225 64 106 99 183 224 101 45 305 95 59 107 2

75 166 257 85 156 66 233 144 136 70 60 144 2 1∕2
90 200 274 105 168 70 254 152 141 70 65 151 3
110 238 273 123 175 78 301 169 164 120 72 174 4

PF 3 39 696 032

120
Model:
Option:
bar)
[l ⁄ min]
16 10 10 70 199 230 482 1 1.459 199 230 492 1 1.459

20 15 10 185 199 230 483 1 1.459 199 230 493 1 1.459

25 20 10 350 199 230 484 1 1.576 199 230 494 1 1.576
32 25 10 700 199 230 485 1 1.269 199 230 495 1 1.700
40 32 10 1000 199 230 486 1 2.751 199 230 496 1 2.751
50 40 10 1600 199 230 487 1 3.073 199 230 497 1 3.073
63 50 10 3100 199 230 488 1 3.931 199 230 498 1 3.931

16 50 230 27 62 168 40 77 92 194 56 25 261 76 48 64

20 50 230 27 62 168 40 77 95 194 56 25 261 76 48 64

25 58 239 30 71 168 40 77 110 194 65 25 261 76 48 72
32 68 239 36 71 168 40 77 123 194 71 25 261 76 48 79
40 84 271 44 84 187 51 99 146 224 85 45 305 95 59 94
50 97 271 51 84 187 51 99 157 224 89 45 305 95 59 95
63 124 293 64 106 187 51 99 183 224 101 45 305 95 59 107

d closest
[mm] inch
[inch]
16 ∕8

3
20 1
∕2
25 3
∕4
32 1
40 1 1∕4
50 1 1∕2
63 2

PF 3 39 696 032

121
Model:
(DN80), PA45 (DN100)
Option:
bar)
[l ⁄ min]
16 10 10 70 199 230 622 1 1.159 199 230 632 1 1.159

20 15 10 185 199 230 623 1 1.159 199 230 633 1 1.159

25 20 10 350 199 230 624 1 1.276 199 230 634 1 1.276
32 25 10 700 199 230 625 1 1.400 199 230 635 1 1.052
40 32 10 1000 199 230 626 1 2.451 199 230 636 1 2.451
50 40 10 1600 199 230 627 1 2.773 199 230 637 1 2.773

63 50 10 3100 199 230 628 1 3.631 199 230 638 1 3.631

75 65 10 5000 199 230 629 1 7.200 199 230 639 1 7.200
90 80 10 7000 199 230 630 1 10.400 199 230 640 1 10.400
110 100 10 11000 199 230 631 1 15.000 199 230 641 1 15.000

[inch]
16 50 159 27 62 77 114 194 56 130 25 261 76 48 ∕8

3
20 50 159 27 62 77 124 194 56 130 25 261 76 48 1

∕2
25 58 168 30 71 77 144 194 65 150 25 261 76 48 3
∕4
32 68 168 36 71 77 154 194 71 160 25 261 76 48 1
40 84 202 44 84 99 174 224 85 180 45 305 95 59 1 1∕4
50 97 202 51 84 99 194 224 89 200 45 305 95 59 1 1∕2

63 124 225 64 106 99 224 224 101 230 45 305 95 59 2

75 166 257 85 156 66 284 144 136 290 70 60 2 1∕2
90 200 274 105 168 70 300 152 141 310 70 65 3
110 238 273 123 175 78 340 169 164 350 120 72 4

PF 3 39 696 032

122
Model:
Option:
bar)
[l ⁄ min]
16 10 10 70 199 230 502 1 1.459 199 230 512 1 1.459

20 15 10 185 199 230 503 1 1.459 199 230 513 1 1.459

25 20 10 350 199 230 504 1 1.576 199 230 514 1 1.576
32 25 10 700 199 230 505 1 1.700 199 230 515 1 1.700
40 32 10 1000 199 230 506 1 2.751 199 230 516 1 2.751
50 40 10 1600 199 230 507 1 3.073 199 230 517 1 3.073
63 50 10 3100 199 230 508 1 3.931 199 230 518 1 3.931

16 50 159 27 62 168 40 77 114 194 56 130 25 261 76 48

20 50 159 27 62 168 40 77 124 194 56 130 25 261 76 48

25 58 168 30 71 168 40 77 144 194 65 150 25 261 76 48
32 68 168 36 71 168 40 77 154 194 71 160 25 261 76 48
40 84 202 44 84 187 51 99 174 224 85 180 45 305 95 59
50 97 202 51 84 187 51 99 194 224 89 200 45 305 95 59
63 124 225 64 106 187 51 99 224 224 101 230 45 305 95 59

d closest
[mm] inch
[inch]
16 ∕8

3
20 1
∕2
25 3
∕4
32 1
40 1 1∕4
50 1 1∕2
63 2

PF 3 39 696 032

123
Model:
(DN80), PA45 (DN100)
Option:
bar)
[l ⁄ min]
∕8 10 10 70 199 230 942 1 1.200 199 230 952 1 1.200

3

1
∕2 15 10 185 199 230 943 1 1.200 199 230 953 1 1.200
3
∕4 20 10 350 199 230 944 1 1.300 199 230 954 1 1.300
1 25 10 700 199 230 945 1 1.400 199 230 955 1 1.400
1 1∕4 32 10 1000 199 230 946 1 2.500 199 230 956 1 2.500
1 1∕2 40 10 1600 199 230 947 1 2.800 199 230 957 1 2.800

2 50 10 3100 199 230 948 1 3.700 199 230 958 1 3.700

2 1∕2 65 10 5000 199 230 949 1 7.100 199 230 959 1 7.100
3 80 10 7000 199 230 950 1 10.300 199 230 960 1 10.300
4 100 10 11000 199 230 951 1 14.800 199 230 961 1 14.800

∕8 50 159 27 62 77 92 194 56 25 261 76 48 64

3

1
∕2 50 159 27 62 77 95 194 56 25 261 76 48 64
3
∕4 58 168 30 71 77 110 194 65 25 261 76 48 72
1 68 168 36 71 77 123 194 71 25 261 76 48 79
1 1∕4 84 202 44 84 99 146 224 85 45 305 95 59 94
1 1∕2 97 202 51 84 99 157 224 89 45 305 95 59 95

2 124 225 64 106 99 183 224 101 45 305 95 59 107

2 1∕2 166 257 85 156 66 233 144 136 70 60 144
3 200 274 105 168 70 254 152 141 70 65 151
4 238 273 123 175 78 301 169 164 120 72 174

PF 3 39 696 032

124
Model:
Option:
bar)
[l ⁄ min]
∕8 10 10 70 199 230 832 1 1.500 199 230 852 1 1.500

3

1
∕2 15 10 185 199 230 833 1 1.500 199 230 853 1 1.500
3
∕4 20 10 350 199 230 834 1 1.600 199 230 854 1 1.600
1 25 10 700 199 230 835 1 1.700 199 230 855 1 1.700
1 1∕4 32 10 1000 199 230 836 1 2.800 199 230 856 1 2.800
1 1∕2 40 10 1600 199 230 837 1 3.100 199 230 857 1 3.100
2 50 10 3100 199 230 838 1 4.000 199 230 858 1 4.000

∕8 50 159 27 62 168 40 77 92 194 56 25 261 76 48 64

3

1
∕2 50 159 27 62 168 40 77 95 194 56 25 261 76 48 64
3
∕4 58 168 30 71 168 40 77 110 194 65 25 261 76 48 72
1 68 168 36 71 168 40 77 123 194 71 25 261 76 48 79
1 1∕4 84 202 44 84 187 51 99 146 224 85 45 305 95 59 94
1 1∕2 97 202 51 84 187 51 99 157 224 89 45 305 95 59 95
2 124 225 64 106 187 51 99 183 224 101 45 305 95 59 107

PF 3 39 696 032

125
Model:
(DN80), PA45 (DN100)
Option:
bar)
[l ⁄ min]
75 65 10 5000 199 234 649 1 11.100 199 234 659 1 11.100

90 80 10 7000 199 234 650 1 15.100 199 234 660 1 15.100

110 100 10 11000 199 234 651 1 21.500 199 234 661 1 21.500

d D H H1 H2 H5 H6 L L1 L2 L3 L4 L6
75 166 257 85 156 66 93 284 144 136 290 70 60

90 200 274 105 168 70 100 300 152 141 310 70 65

110 238 273 123 175 78 110 340 169 164 350 120 72

PF 3 39 696 032

126
285
Horizontal/T-port
Model:
• Actuator fails safe to the closed position FC
• Basic position B-C opened, activated position A-B-C opened, see flow scheme
bar)
[l ⁄ min]
16 10 10 140 199 285 142 1 1.135 199 285 152 1 1.135

20 15 10 200 199 285 143 1 1.141 199 285 153 1 1.141

25 20 10 470 199 285 144 1 1.278 199 285 154 1 1.278
32 25 10 793 199 285 145 1 1.479 199 285 155 1 1.479
40 32 10 1290 199 285 146 1 2.608 199 285 156 1 2.608
50 40 10 1910 199 285 147 1 3.088 199 285 157 1 3.088
63 50 10 3100 199 285 148 1 4.536 199 285 158 1 4.536

d D H H1 H2 H3 H4 H5 H6 L L1 L2 L3 L4 L5 L6
16 50 159 28 62 97 40 77 8 109 194 73 36 25 261 76

20 50 159 28 62 97 40 77 8 112 194 73 36 25 261 76

25 58 168 32 71 97 40 77 8 131 194 86 43 25 261 76
32 68 168 36 71 97 40 77 8 151 194 99 50 25 261 76
40 84 203 45 84 119 51 99 9 181 224 120 60 45 305 95
50 97 203 51 84 119 51 99 9 205 224 137 69 45 305 95
63 124 225 65 106 119 51 99 9 261 224 179 89 45 305 95

d L7 M z z1 closest
[inch]
16 48 6 81 40 ∕8

3
20 48 6 81 40 1
∕2
25 48 6 94 47 3
∕4
32 48 6 107 54 1
40 59 8 130 65 1 1∕4
50 59 8 143 72 1 1∕2
63 59 8 185 92 2

PF 3 39 981 032

127
Horizontal/T-port
Model:
• Basic position B-C opened, activated position A-B-C opened, see flow scheme
bar)
[l ⁄ min]
16 10 10 140 199 285 122 1 1.141 199 285 132 1 1.141

20 15 10 200 199 285 123 1 1.151 199 285 133 1 1.151

25 20 10 470 199 285 124 1 1.294 199 285 134 1 1.294
32 25 10 793 199 285 125 1 1.505 199 285 135 1 1.505
40 32 10 1290 199 285 126 1 2.630 199 285 136 1 2.630
50 40 10 1910 199 285 127 1 3.156 199 285 137 1 3.156
63 50 10 3100 199 285 128 1 4.673 199 285 138 1 4.673

16 50 159 28 62 97 40 77 8 131 194 73 36 25 261 76

20 50 159 28 62 97 40 77 8 141 194 73 36 25 261 76

25 58 168 32 71 97 40 77 8 165 194 86 43 25 261 76
32 68 168 36 71 97 40 77 8 182 194 99 50 25 261 76
40 84 203 45 84 119 51 99 9 209 224 120 60 45 305 95
50 97 203 51 84 119 51 99 9 242 224 137 69 45 305 95
63 124 225 65 106 119 51 99 9 302 224 179 89 45 305 95

d L7 M closest
[mm] [mm] inch
[inch]
16 48 6 ∕8

3
20 48 6 1
∕2
25 48 6 3
∕4
32 48 6 1
40 59 8 1 1∕4
50 59 8 1 1∕2
63 59 8 2

PF 3 39 981 032

128
Horizontal/T-port DA (Double acting)
Model:
bar)
[l ⁄ min]
16 10 10 140 199 285 322 1 0.944 199 285 332 1 0.944

20 15 10 200 199 285 323 1 0.951 199 285 333 1 0.951

25 20 10 470 199 285 324 1 1.088 199 285 334 1 1.088
32 25 10 793 199 285 325 1 1.289 199 285 335 1 1.289
40 32 10 1290 199 285 326 1 2.184 199 285 336 1 2.184
50 40 10 1910 199 285 327 1 2.664 199 285 337 1 2.664
63 50 10 3100 199 285 328 1 4.112 199 285 338 1 4.112

16 50 159 28 62 97 40 77 8 109 194 73 36 25 261 76

20 50 159 28 62 97 40 77 8 112 194 73 36 25 261 76

25 58 168 32 71 97 40 77 8 131 194 86 43 25 261 76
32 68 168 36 71 97 40 77 8 151 194 99 50 25 261 76
40 84 203 45 84 119 51 99 9 181 224 120 60 45 305 95
50 97 203 51 84 119 51 99 9 205 224 137 69 45 305 95
63 124 225 65 106 119 51 99 9 261 224 179 89 45 305 95

d L7 M z z1 closest
[inch]
16 48 6 81 40 ∕8

3
20 48 6 81 40 1
∕2
25 48 6 94 47 3
∕4
32 48 6 107 54 1
40 59 8 130 65 1 1∕4
50 59 8 143 72 1 1∕2
63 59 8 185 92 2

PF 3 39 981 032

129
Horizontal/T-port DA (Double acting)
Model:
bar)
[l ⁄ min]
16 10 10 140 199 285 302 1 0.951 199 285 312 1 0.951

20 15 10 200 199 285 303 1 0.961 199 285 313 1 0.961

25 20 10 470 199 285 304 1 1.104 199 285 314 1 1.104
32 25 10 793 199 285 305 1 1.315 199 285 315 1 1.315
40 32 10 1290 199 285 306 1 2.206 199 285 316 1 2.206
50 40 10 1910 199 285 307 1 2.732 199 285 317 1 2.732
63 50 10 3100 199 285 308 1 4.249 199 285 318 1 4.249

16 50 159 28 62 97 40 77 8 131 194 73 36 25 261 76

20 50 159 28 62 97 40 77 8 141 194 73 36 25 261 76

25 58 168 32 71 97 40 77 8 165 194 86 43 25 261 76
32 68 168 36 71 97 40 77 8 182 194 99 50 25 261 76
40 84 203 45 84 119 51 99 9 209 224 120 60 45 305 95
50 97 203 51 84 119 51 99 9 242 224 137 69 45 305 95
63 124 225 65 106 119 51 99 9 302 224 179 89 45 305 95

d L7 M closest
[mm] [mm] inch
[inch]
16 48 6 ∕8

3
20 48 6 1
∕2
25 48 6 3
∕4
32 48 6 1
40 59 8 1 1∕4
50 59 8 1 1∕2
63 59 8 2

PF 3 39 981 032

130
Horizontal/L-port
Model:
• Basic position B-C opened, activated position A-C opened, see flow scheme
bar)
[l ⁄ min]
16 10 10 50 199 285 102 1 1.136 199 285 112 1 1.136

20 15 10 75 199 285 103 1 1.142 199 285 113 1 1.142

25 20 10 150 199 285 104 1 1.280 199 285 114 1 1.280
32 25 10 280 199 285 105 1 1.486 199 285 115 1 1.486
40 32 10 480 199 285 106 1 2.619 199 285 116 1 2.619
50 40 10 620 199 285 107 1 3.110 199 285 117 1 3.110
63 50 10 1230 199 285 108 1 4.585 199 285 118 1 4.585

16 50 159 28 62 97 40 77 8 109 194 73 36 25 261 76

20 50 159 28 62 97 40 77 8 112 194 73 36 25 261 76

25 58 168 32 71 97 40 77 8 131 194 86 43 25 261 76
32 68 168 36 71 97 40 77 8 151 194 99 50 25 261 76
40 84 203 45 84 119 51 99 9 181 224 120 60 45 305 95
50 97 203 51 84 119 51 99 9 205 224 137 69 45 305 95
63 124 225 65 106 119 51 99 9 261 224 179 89 45 305 95

d L7 M z z1 closest
[inch]
16 48 6 81 40 ∕8

3
20 48 6 81 40 1
∕2
25 48 6 94 47 3
∕4
32 48 6 107 54 1
40 59 8 130 65 1 1∕4
50 59 8 143 72 1 1∕2
63 59 8 185 92 2

PF 3 39 981 032

131
Horizontal/L-port
Model:
• Basic position B-C opened, activated position A-C opened, see flow scheme
bar)
[l ⁄ min]
16 10 10 50 199 285 082 1 1.142 199 285 092 1 1.142

20 15 10 75 199 285 083 1 1.152 199 285 093 1 1.152

25 20 10 150 199 285 084 1 1.296 199 285 094 1 1.296
32 25 10 280 199 285 085 1 1.512 199 285 095 1 1.512
40 32 10 480 199 285 086 1 2.642 199 285 096 1 2.642
50 40 10 620 199 285 087 1 3.179 199 285 097 1 3.179
63 50 10 1230 199 285 088 1 4.722 199 285 098 1 4.722

16 50 159 28 62 97 40 77 8 131 194 73 36 25 261 76

20 50 159 28 62 97 40 77 8 141 194 73 36 25 261 76

25 58 168 32 71 97 40 77 8 165 194 86 43 25 261 76
32 68 168 36 71 97 40 77 8 182 194 99 50 25 261 76
40 84 203 45 84 119 51 99 9 209 224 120 60 45 305 95
50 97 203 51 84 119 51 99 9 242 224 137 69 45 305 95
63 124 225 65 106 119 51 99 9 302 224 179 89 45 305 95

d L7 M closest
[mm] [mm] inch
[inch]
16 48 6 ∕8

3
20 48 6 1
∕2
25 48 6 3
∕4
32 48 6 1
40 59 8 1 1∕4
50 59 8 1 1∕2
63 59 8 2

PF 3 39 981 032

132
Horizontal/L-port DA (Double acting)
Model:
bar)
[l ⁄ min]
16 10 10 50 199 285 282 1 0.945 199 285 292 1 0.945

20 15 10 75 199 285 283 1 0.952 199 285 293 1 0.952

25 20 10 150 199 285 284 1 1.090 199 285 294 1 1.090
32 25 10 280 199 285 285 1 1.296 199 285 295 1 1.296
40 32 10 480 199 285 286 1 2.195 199 285 296 1 2.195
50 40 10 620 199 285 287 1 2.686 199 285 297 1 2.686
63 50 10 1230 199 285 288 1 4.161 199 285 298 1 4.161

16 50 159 28 62 97 40 77 8 109 194 73 36 25 261 76

20 50 159 28 62 97 40 77 8 112 194 73 36 25 261 76

25 58 168 32 71 97 40 77 8 131 194 86 43 25 261 76
32 68 168 36 71 97 40 77 8 151 194 99 50 25 261 76
40 84 203 45 84 119 51 99 9 181 224 120 60 45 305 95
50 97 203 51 84 119 51 99 9 205 224 137 69 45 305 95
63 124 225 65 106 119 51 99 9 261 224 179 89 45 305 95

d L7 M z z1 closest
[inch]
16 48 6 81 40 ∕8

3
20 48 6 81 40 1
∕2
25 48 6 94 47 3
∕4
32 48 6 107 54 1
40 59 8 130 65 1 1∕4
50 59 8 143 72 1 1∕2
63 59 8 185 92 2

PF 3 39 981 032

133
Horizontal/L-port DA (Double acting)
Model:
bar)
[l ⁄ min]
16 10 10 50 199 285 262 1 0.952 199 285 272 1 0.952

20 15 10 75 199 285 263 1 0.962 199 285 273 1 0.962

25 20 10 150 199 285 264 1 1.106 199 285 274 1 1.106
32 25 10 280 199 285 265 1 1.322 199 285 275 1 1.322
40 32 10 480 199 285 266 1 2.218 199 285 276 1 2.218
50 40 10 620 199 285 267 1 2.755 199 285 277 1 2.755
63 50 10 1230 199 285 268 1 4.298 199 285 278 1 4.298

16 50 159 28 62 97 40 77 8 131 194 73 36 25 261 76

20 50 159 28 62 97 40 77 8 141 194 73 36 25 261 76

25 58 168 32 71 97 40 77 8 165 194 86 43 25 261 76
32 68 168 36 71 97 40 77 8 182 194 99 50 25 261 76
40 84 203 45 84 119 51 99 9 209 224 120 60 45 305 95
50 97 203 51 84 119 51 99 9 242 224 137 69 45 305 95
63 124 225 65 106 119 51 99 9 302 224 179 89 45 305 95

d L7 M closest
[mm] [mm] inch
[inch]
16 48 6 ∕8

3
20 48 6 1
∕2
25 48 6 3
∕4
32 48 6 1
40 59 8 1 1∕4
50 59 8 1 1∕2
63 59 8 2

PF 3 39 981 032

134
Diaphragm valves pneumatic
New generation
Diaphragm valve DIASTAR Six PVC-C
FC (Fail safe to close)
Model:
• Rotating air connection at 90° intervals
Option:
d DN PN kv-val- EPDM SP Weight
[mm] [mm] [bar] ue (Δp=1 Code [kg]
bar)
[l ⁄ min]
20 15 6 125 163 614 012 1 0.577

25 20 6 271 163 614 013 1 1.067

32 25 6 481 163 614 014 1 1.302
40 32 6 759 163 614 015 1 2.152
50 40 6 960 163 614 016 1 2.795
63 50 6 1181 163 614 017 1 3.972

d D D1_G H H1 H2 H3 H7 L L2 M z Lift = closest
[mm] [mm] [inch] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] Hx inch
[mm] [inch]
20 68 ∕8 101 14 12 60 43 128 25 M6 96 7 ∕2

1

1
25 96 1
∕8 132 18 12 73 57 152 25 M6 114 10 3
∕4
32 96 1
∕8 143 22 12 84 57 166 25 M6 122 13 1
40 120 1
∕8 173 26 15 99 69 192 45 M8 140 14 1 1∕4
50 120 1
∕8 193 32 15 119 69 222 45 M8 160 16 1 1∕2
PF 3 39 212 201 63 120 1
∕8 205 39 15 132 69 266 45 M8 190 16 2

135
Model:
Option:
bar)
[l ⁄ min]
20 15 6 125 163 615 012 1 0.462

25 20 6 271 163 615 013 1 0.978

32 25 6 481 163 615 014 1 1.166
40 32 6 759 163 615 015 1 1.908
50 40 6 960 163 615 016 1 2.464
63 50 6 1181 163 615 017 1 3.431

d D D1_G H H1 H2 H3 H7 L L2 M Lift = closest
[mm] [mm] [inch] [mm] [mm] [mm] [mm] [mm] [mm] [mm] Hx inch
[mm] [inch]
20 68 ∕8 101 14 12 60 43 124 25 M6 7 ∕2

1

1
25 96 1
∕8 132 18 12 73 57 144 25 M6 10 3
∕4
32 96 1
∕8 143 22 12 84 57 154 25 M6 13 1
40 120 1
∕8 173 26 15 99 69 174 45 M8 14 1 1∕4
50 120 1
∕8 193 32 15 119 69 194 45 M8 16 1 1∕2
PF 3 39 212 201 63 120 1
∕8 205 39 15 132 69 224 45 M8 16 2

136
Model:
PN 10
Option:
bar)
[l ⁄ min]
20 15 6 125 163 617 112 1 0.696

25 20 6 271 163 617 113 1 1.215

32 25 6 481 163 617 114 1 1.502
40 32 6 759 163 617 115 1 2.436
50 40 6 960 163 617 116 1 3.004
63 50 6 1181 163 617 117 1 4.399

d D D1_G D3 D4 D5 H H1 H2 H3 H7 L L2 M Lift =
[mm] [mm] [inch] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] Hx
[mm]
20 68 ∕8 95 65 14 101 14 12 60 43 130 25 M6 7

1

25 96 1
∕8 105 75 14 132 18 12 73 57 150 25 M6 10
32 96 1
∕8 115 85 14 143 22 12 84 57 160 25 M6 13
40 120 1
∕8 140 100 18 173 26 15 99 69 180 45 M8 14
50 120 1
∕8 150 110 18 193 32 15 119 69 200 45 M8 16
63 120 1
∕8 165 125 18 205 39 15 132 69 230 45 M8 16

d closest
[mm] inch
[inch]
20 ∕2

1
25 3
∕4
32 1
40 1 1∕4
50 1 1∕2
PF 3 39 212 201 63 2

137
Diaphragm valve DIASTAR Ten PVC-C
Model:
Option:
• Comprehensive range of accessories available
* PN: PTFE
Working Pressure: one side
d DN PN PN* kv-val- EPDM SP Weight
[mm] [mm] [psi] [bar] ue (Δp=1 Code [kg]
bar)
[l ⁄ min]
20 15 150/150* 10/10* 125 163 624 012 1 0.572

25 20 150/150* 10/10* 271 163 624 013 1 1.142

32 25 150/150* 10/10* 481 163 624 014 1 1.376
40 32 150/150* 10/10* 759 163 624 015 1 2.305
50 40 150/150* 10/10* 1263 163 624 016 1 3.932
63 50 150/90* 10/6* 1728 163 624 017 1 4.893

d PTFE/EPDM SP Weight
[mm] Code [kg]
20 163 624 032 1 0.612

25 163 624 033 1 1.128

32 163 624 034 1 1.393
40 163 624 035 1 2.325
50 163 624 036 1 3.960
63 163 624 037 1 4.925

d D D1_G H H1 H2 H3 H4 H5 H7 L L2 M z Lift =
[mm]
20 68 ∕8 101 14 12 60 24 16 43 128 25 M6 96 7

1

25 96 1
∕8 132 18 12 73 25 16 57 152 25 M6 114 10
32 96 1
∕8 143 22 12 84 25 16 57 166 25 M6 122 13
40 120 1
∕8 173 26 15 99 26 26 69 192 45 M8 140 15
50 150 1
∕4 214 32 15 119 36 26 88 222 45 M8 160 19
63 150 1
∕4 226 39 15 132 36 26 88 266 45 M8 190 23

d closest
[mm] inch
[inch]
20 ∕2

1
25 3
∕4
32 1
40 1 1∕4
50 1 1∕2
PF 3 39 212 201 63 2

138
Model:
Option:
* PN: PTFE
bar)
[l ⁄ min]
20 15 150/150* 10/10* 125 163 625 012 1 0.510

25 20 150/150* 10/10* 271 163 625 013 1 1.054

32 25 150/150* 10/10* 481 163 625 014 1 1.238
40 32 150/150* 10/10* 759 163 625 015 1 2.058
50 40 150/150* 10/10* 1263 163 625 016 1 3.602
63 50 150/90* 10/6* 1728 163 625 017 1 4.352

[mm] Code [kg]
20 163 625 032 1 0.538

25 163 625 033 1 1.054

32 163 625 034 1 1.259
40 163 625 035 1 2.079
50 163 625 036 1 3.631
63 163 625 037 1 4.380

d D D1_G H H1 H2 H3 H4 H5 H7 L L2 M Lift = closest
[mm] [mm] [inch] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] Hx inch
[mm] [inch]
20 68 ∕8 101 14 12 60 24 16 43 124 25 M6 7 ∕2

1

1
25 96 1
∕8 132 18 12 73 25 16 57 144 25 M6 10 3
∕4
32 96 1
∕8 143 22 12 84 25 16 57 154 25 M6 13 1
40 120 1
∕8 173 26 15 99 26 26 69 174 45 M8 15 1 1∕4
50 150 1
∕4 214 32 15 119 36 26 88 194 45 M8 19 1 1∕2
PF 3 39 212 201 63 150 1
∕4 226 39 15 132 36 26 88 224 45 M8 23 2

139
Model:
PN 10
Option:
* PN: PTFE
bar)
[l ⁄ min]
20 15 150/150* 10/10* 125 163 627 112 1 0.722

25 20 150/150* 10/10* 271 163 627 113 1 1.290

32 25 150/150* 10/10* 481 163 627 114 1 1.574
40 32 150/150* 10/10* 759 163 627 115 1 2.586
50 40 150/150* 10/10* 1263 163 627 116 1 4.142
63 50 150/90* 10/6* 1728 163 627 117 1 5.320

[mm] Code [kg]
20 163 627 132 1 0.722

25 163 627 133 1 1.290

32 163 627 134 1 1.595
40 163 627 135 1 2.607
50 163 627 136 1 4.171
63 163 627 137 1 5.348

d D D1_G D3 D4 D5 H H1 H2 H3 H4 H5 H7 L L2
[mm] [mm] [inch] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
20 68 ∕8 95 65 14 101 14 12 60 24 16 43 130 25

1

25 96 1
∕8 105 75 14 132 18 12 73 25 16 57 150 25
32 96 1
∕8 115 85 14 143 22 12 84 25 16 57 160 25
40 120 1
∕8 140 100 18 173 26 15 99 26 26 69 180 45
50 150 1
∕4 150 110 18 193 32 15 119 36 26 88 200 45
63 150 1
∕4 165 125 18 205 39 15 132 36 26 88 230 45

d M Lift = closest
[mm] Hx inch
[mm] [inch]
20 M6 7 ∕2

1
25 M6 10 ∕4 3
32 M6 13 1
40 M8 15 1 1∕4
50 M8 19 1 1∕2
PF 3 39 212 201 63 M8 23 2

140
FO (Fail safe to open)
Model:
Option:
* PN: PTFE
d DN PN* kv-val- EPDM SP Weight PTFE/EPDM SP Weight
bar)
[l ⁄ min]
20 15 10/10* 125 163 644 012 1 0.553 163 644 032 1 0.562

25 20 10/10* 271 163 644 013 1 0.968 163 644 033 1 0.978
32 25 10/10* 481 163 644 014 1 1.194 163 644 034 1 1.213
40 32 10/10* 759 163 644 015 1 1.945 163 644 035 1 1.965
50 40 10/10* 1263 163 644 016 1 3.326 163 644 036 1 3.870
63 50 10/10* 1728 163 644 017 1 4.011 163 644 037 1 4.830

[mm]
20 68 ∕8 101 14 12 60 24 16 43 128 25 M6 96 7

1

25 96 1
∕8 132 18 12 73 25 16 57 152 25 M6 114 10
32 96 1
∕8 143 22 12 84 25 16 57 166 25 M6 122 13
40 120 1
∕8 173 26 15 99 26 26 69 192 45 M8 140 15
50 150 1
∕4 214 32 15 119 36 26 88 222 45 M8 160 19
63 150 1
∕4 226 39 15 132 36 26 88 266 45 M8 190 23

d closest
[mm] inch
[inch]
20 ∕2

1
25 3
∕4
32 1
40 1 1∕4
50 1 1∕2
PF 3 39 212 201 63 2

141
Model:
Option:
* PN: PTFE
bar)
[l ⁄ min]
20 15 10/10* 125 163 645 012 1 0.488 163 645 032 1 0.488

25 20 10/10* 271 163 645 013 1 0.879 163 645 033 1 0.879
32 25 10/10* 481 163 645 014 1 1.058 163 645 034 1 1.079
40 32 10/10* 759 163 645 015 1 1.698 163 645 035 1 1.719
50 40 10/10* 1263 163 645 016 1 3.512 163 645 036 1 3.541
63 50 10/10* 1728 163 645 017 1 4.262 163 645 037 1 4.290

[mm] [inch]
20 68 ∕8 101 14 12 60 24 16 43 124 25 M6 7 ∕2

1

1
25 96 1
∕8 132 18 12 73 25 16 57 144 25 M6 10 3
∕4
32 96 1
∕8 143 22 12 84 25 16 57 154 25 M6 13 1
40 120 1
∕8 173 26 15 99 26 26 69 174 45 M8 15 1 1∕4
50 150 1
∕4 214 32 15 119 36 26 88 194 45 M8 19 1 1∕2
PF 3 39 212 201 63 150 1
∕4 226 39 15 132 36 26 88 224 45 M8 23 2

142
Model:
PN 10
Option:
* PN: PTFE
bar)
[l ⁄ min]
20 15 10/10* 125 163 647 112 1 0.672 163 647 132 1 0.672

25 20 10/10* 271 163 647 113 1 1.116 163 647 133 1 1.116
32 25 10/10* 481 163 647 114 1 1.394 163 647 134 1 1.415
40 32 10/10* 759 163 647 115 1 2.226 163 647 135 1 2.247
50 40 10/10* 1263 163 647 116 1 4.052 163 647 136 1 4.081
63 50 10/10* 1728 163 647 117 1 5.230 163 647 137 1 4.768

20 68 ∕8 95 65 14 101 14 12 60 24 16 43 130 25

1

25 96 1
∕8 105 75 14 132 18 12 73 25 16 57 150 25
32 96 1
∕8 115 85 14 143 22 12 84 25 16 57 160 25
40 120 1
∕8 140 100 18 173 26 15 99 26 26 69 180 45
50 150 1
∕4 150 110 18 214 32 15 119 36 26 88 200 45
63 150 1
∕4 165 125 18 226 39 15 132 36 26 88 230 45

d M Lift = closest
[mm] Hx inch
[mm] [inch]
20 M6 7 ∕2

1
25 M6 10 ∕43
32 M6 13 1
40 M8 15 1 1∕4
50 M8 19 1 1∕2
PF 3 39 212 201 63 M8 23 2

143
DA (Double acting)
Model:
Option:
* PN: PTFE
bar)
[l ⁄ min]
20 15 10/10* 125 163 654 012 1 0.537 163 654 032 1 0.546

25 20 10/10* 271 163 654 013 1 0.932 163 654 033 1 0.942
32 25 10/10* 481 163 654 014 1 1.164 163 654 034 1 1.183
40 32 10/10* 759 163 654 015 1 1.885 163 654 035 1 1.905
50 40 10/10* 1263 163 654 016 1 3.092 163 654 036 1 3.120
63 50 10/10* 1728 163 654 017 1 4.053 163 654 037 1 4.080

[mm]
20 68 ∕8 101 14 12 60 24 16 43 128 25 M6 96 7

1

25 96 1
∕8 132 18 12 73 25 16 57 152 25 M6 114 10
32 96 1
∕8 143 22 12 84 25 16 57 166 25 M6 122 13
40 120 1
∕8 173 26 15 99 26 26 69 192 45 M8 140 15
50 150 1
∕4 214 32 15 119 36 26 88 222 45 M8 160 19
63 150 1
∕4 226 39 15 132 36 26 88 266 45 M8 190 23

d closest
[mm] inch
[inch]
20 ∕2

1
25 3
∕4
32 1
40 1 1∕4
50 1 1∕2
PF 3 39 212 201 63 2

144
DA (Double acting)
Model:
Option:
* PN: PTFE
bar)
[l ⁄ min]
20 15 10/10* 125 163 655 012 1 0.472 163 655 032 1 0.472

25 20 10/10* 271 163 655 013 1 0.843 163 655 033 1 0.843
32 25 10/10* 481 163 655 014 1 1.028 163 655 034 1 1.049
40 32 10/10* 759 163 655 015 1 1.638 163 655 035 1 1.659
50 40 10/10* 1263 163 655 016 1 2.762 163 655 036 1 2.791
63 50 10/10* 1728 163 655 017 1 3.512 163 655 037 1 3.540

[mm] [inch]
20 68 ∕8 101 14 12 60 24 16 43 124 25 M6 7 ∕2

1

1
25 96 1
∕8 132 18 12 73 25 16 57 144 25 M6 10 3
∕4
32 96 1
∕8 143 22 12 84 25 16 57 154 25 M6 13 1
40 120 1
∕8 173 26 15 99 26 26 69 174 45 M8 15 1 1∕4
50 150 1
∕4 214 32 15 119 36 26 88 194 45 M8 19 1 1∕2
PF 3 39 212 201 63 150 1
∕4 226 39 15 132 36 26 88 224 45 M8 23 2

145
DA (Double acting)
Model:
PN 10
Option:
* PN: PTFE
bar)
[l ⁄ min]
20 15 10/10* 125 163 657 112 1 0.656 163 657 132 1 0.656

25 20 10/10* 271 163 657 113 1 1.080 163 657 133 1 1.080
32 25 10/10* 481 163 657 114 1 1.364 163 657 134 1 1.441
40 32 10/10* 759 163 657 115 1 2.166 163 657 135 1 2.187
50 40 10/10* 1263 163 657 116 1 3.302 163 657 136 1 3.331
63 50 10/10* 1728 163 657 117 1 4.480 163 657 137 1 4.508

20 68 ∕8 95 65 14 101 14 12 60 24 16 43 130 25

1

25 96 1
∕8 105 75 14 132 18 12 73 25 16 57 150 25
32 96 1
∕8 115 85 14 143 22 12 84 25 16 57 160 25
40 120 1
∕8 140 100 18 173 26 15 99 26 26 69 180 45
50 150 1
∕4 150 110 18 214 32 15 119 36 26 88 200 45
63 150 1
∕4 165 125 18 226 39 15 132 36 26 88 230 45

d M Lift = closest
[mm] Hx inch
[mm] [inch]
20 M6 7 ∕2

1
25 M6 10 ∕43
32 M6 13 1
40 M8 15 1 1∕4
50 M8 19 1 1∕2
PF 3 39 212 201 63 M8 23 2

146
Diaphragm valve DIASTAR TenPlus PVC-C
Model:
Option:
* PN: PTFE
Working Pressure: both sides
bar)
[l ⁄ min]
20 15 10/10* 125 163 684 012 1 1.004 163 684 032 1 1.012

25 20 10/10* 271 163 684 013 1 1.142 163 684 033 1 1.153
32 25 10/10* 481 163 684 014 1 1.968 163 684 034 1 1.987
40 32 10/10* 759 163 684 015 1 3.375 163 684 035 1 3.395
50 40 10/10* 1263 163 684 016 1 5.340 163 684 036 1 5.368
63 50 10/10* 1728 163 684 017 1 6.300 163 684 037 1 6.327

[mm]
20 96 ∕8 127 14 12 68 25 16 57 128 25 M6 96 7

1

25 96 1
∕8 132 18 12 73 25 16 57 152 25 M6 114 10
32 120 1
∕8 167 22 12 93 26 26 69 166 25 M6 122 13
40 150 1
∕4 196 26 15 101 36 26 88 192 45 M8 140 15
50 180 1
∕4 239 32 15 124 37 26 103 222 45 M8 160 19
63 180 1
∕4 251 39 15 137 37 26 103 266 45 M8 190 23

d closest
[mm] inch
[inch]
20 ∕2

1
25 3
∕4
32 1
40 1 1∕4
50 1 1∕2
PF 3 39 212 201 63 2

147
Model:
Option:
* PN: PTFE
bar)
[l ⁄ min]
20 15 10/10* 125 163 685 012 1 0.943 163 685 032 1 0.938

25 20 10/10* 271 163 685 013 1 1.054 163 685 033 1 1.054
32 25 10/10* 481 163 685 014 1 1.947 163 685 034 1 1.853
40 32 10/10* 759 163 685 015 1 3.128 163 685 035 1 3.149
50 40 10/10* 1263 163 685 016 1 5.010 163 685 036 1 5.039
63 50 10/10* 1728 163 685 017 1 5.759 163 685 037 1 5.787

[mm] [inch]
20 96 ∕8 127 14 12 68 25 16 57 124 25 M6 7 ∕2

1

1
25 96 1
∕8 132 18 12 73 25 16 57 144 25 M6 10 3
∕4
32 120 1
∕8 167 22 12 93 26 26 69 154 25 M6 13 1
40 150 1
∕4 196 26 15 101 36 26 88 174 45 M8 15 1 1∕4
50 180 1
∕4 239 32 15 124 37 26 103 194 45 M8 19 1 1∕2
PF 3 39 212 201 63 180 1
∕4 251 39 15 137 37 26 103 224 45 M8 23 2

148
Model:
PN 10
Option:
* PN: PTFE
bar)
[l ⁄ min]
20 15 10/10* 125 163 687 112 1 1.123 163 687 132 1 1.123

25 20 10/10* 271 163 687 113 1 1.290 163 687 133 1 1.290
32 25 10/10* 481 163 687 114 1 2.168 163 687 134 1 2.320
40 32 10/10* 759 163 687 115 1 3.656 163 687 135 1 3.677
50 40 10/10* 1263 163 687 116 1 5.550 163 687 136 1 5.579
63 50 10/10* 1728 163 687 117 1 6.727 163 687 137 1 7.147

20 96 ∕8 95 65 14 127 14 12 68 25 16 57 130 25

1

25 96 1
∕8 105 75 14 132 18 12 73 25 16 57 150 25
32 120 1
∕8 115 85 14 167 22 12 93 26 26 69 160 25
40 150 1
∕4 140 100 18 196 26 15 101 36 26 88 180 45
50 180 1
∕4 150 110 18 239 32 15 124 37 26 103 200 45
63 180 1
∕4 165 125 18 251 39 15 137 37 26 103 230 45

d M Lift = closest
[mm] Hx inch
[mm] [inch]
20 M6 7 ∕2

1
25 M6 10 ∕43
32 M6 13 1
40 M8 15 1 1∕4
50 M8 19 1 1∕2
PF 3 39 212 201 63 M8 23 2

149
Diaphragm valves pneumatic
Diaphragm valve type DIASTAR PVC-C
Series 025 FC (Fail safe to close)
With fixed flanges PVC-C metric
Model:
• Connecting dimension: ISO 7005 / EN 1092 / DIN 25 PN10 / BS4504
• With position indicator / Working pressure: one side

* With backing flanges PP-V
** Connecting dimensions DN80 and DN150 metric and Inch ANSI B16.5
d Size DN PN kv-val- EPDM Weight PTFE/EPDM Weight
bar)
[l ⁄ min]
* 75 2 ∕2 65 10 992 199 025 697 13.600 199 025 727 13.600

1

** 90 3 80 10 1700 199 025 698 17.830 199 025 728 17.973

110 4 100 6 2700 199 025 699 24.700 199 025 729 24.700

d D D1_G D2 D3[M] D4 H H1 H2 H3 H4 H5 H6 H7
[mm] [mm] [inch] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
* 75 280 ∕4 185 8 145 344 148 24 46 100 129 195 298

1

** 90 280 1
∕4 200 12 160 348 150 24 46 100 129 195 302
110 335 1
∕4 225 12 180 395 176 24 46 100 129 195 349

d H9 H10 L L2
* 75 46 15 290 70

** 90 57 15 310 120
110 69 20 350 120

PF 3 39 212 109

150
Series 025 FO (Fail safe to open)
Model:

bar)
[l ⁄ min]
* 75 2 1∕2 65 10 992 199 025 707 13.600 199 025 737 13.600

** 90 3 80 10 1700 199 025 708 17.400 199 025 738 17.400

110 4 100 6 2700 199 025 709 24.700 199 025 739

* 75 280 ∕4 185 8 145 344 148 24 46 100 129 195 298

1

** 90 280 1
∕4 200 12 160 348 150 24 46 100 129 195 302
110 335 1
∕4 225 12 180 395 176 24 46 100 129 195 349

d H9 H10 L L2
* 75 46 15 290 70

** 90 57 15 310 120
110 69 20 350 120

PF 3 39 212 110

151
Series 025 DA (Double acting)
Model:

bar)
[l ⁄ min]
* 75 2 1∕2 65 10 992 199 025 717 12.529 199 025 747 13.600

** 90 3 80 10 1700 199 025 718 17.400 199 025 748 17.400

110 4 100 6 2700 199 025 719 24.700 199 025 749 24.700

* 75 280 ∕4 185 8 145 344 148 24 46 100 129 195 298

1

** 90 280 1
∕4 200 12 160 348 150 24 46 100 129 195 302
110 335 1
∕4 225 12 180 395 176 24 46 100 129 195 349

d H9 H10 L L2
* 75 46 15 290 70

** 90 57 15 310 120
110 69 20 350 120

PF 3 39 212 111

152
Butterfly valves electric
Butterfly valve type 140 PVC-C 100-230V
Model:
• Voltage 100-230 V, 50-60 Hz
• Control time 15 s/90°<) EA31
• Actuator with integrated emergency manual override standard
bar)
[l ⁄ min]
63 2 50 10 1470 199 140 202 1 3.189 199 140 222 1 3.193

75 2 ∕2
1
65 10 2200 199 140 203 1 4.529 199 140 223 1 4.312
90 3 80 10 3000 199 140 204 1 4.484 199 140 224 1 4.491
110 4 100 10 6500 199 140 205 1 5.119 199 140 225 1 5.133
140 5 125 10 11500 199 140 206 1 4.719 199 140 226 1 4.737
160 6 150 10 16600 199 140 207 1 6.701 199 140 227 1 6.724
225 8 200 10 39600 199 140 208 1 12.966 199 140 228 1 12.994

d PTFE
[mm] Code
63 199 140 722

75 199 140 723

90 199 140 724
110 199 140 725
140 199 140 726
160 199 140 727
225 199 140 728

d Actuator d2 D D1 D1 H H1 H2 H3 L L1 L2 Q1
[mm] unit type [mm] [mm] min. max. [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
[mm] [mm]
63 EA-31 104 19 120 125 400 77 134 188 45 122 180 40

75 EA-31 115 19 140 145 413 83 140 188 46 122 180 54

90 EA-31 131 19 150 160 428 89 146 188 49 122 180 67
110 EA-31 161 19 175 191 460 104 167 188 56 122 180 88
140 EA-31 187 23 210 216 487 117 181 188 64 122 180 113
160 EA-31 215 24 241 241 508 130 189 188 72 122 180 139
225 EA-42 267 23 290 295 575 158 210 208 73 122 180 178

d Q2
[mm] [mm]
63

75 35
90 50
110 74
140 97
160 123
225 169

PF 3 39 643 033

153
Butterfly valve type 140 PVC-C 100-230V
Model:
• Voltage 100-230 V, 50-60 Hz
bar)
[l ⁄ min]
63 2 50 10 1470 199 140 162 1 5.678 199 140 182 1 4.233

75 2 ∕2
1
65 10 2200 199 140 163 1 5.801 199 140 183 1 5.812
90 3 80 10 3000 199 140 164 1 5.984 199 140 184 1 5.991
110 4 100 10 6500 199 140 165 1 6.619 199 140 185 1 6.633
140 5 125 10 11500 199 140 166 1 5.732 199 140 186 1 5.750
160 6 150 10 16600 199 140 167 1 8.201 199 140 187 1 8.224
225 8 200 10 39600 199 140 168 1 14.466 199 140 188 1 14.494

d PTFE
[mm] Code
63 199 140 762

75 199 140 763

90 199 140 764
110 199 140 765
140 199 140 766
160 199 140 767
225 199 140 768

d Actuator d2 D D1 D1 H H1 H2 H3 H4 L L1 L2
[mm] [mm]
63 EA-31 104 19 120 125 460 77 134 188 60 45 122 180

75 EA-31 115 19 140 145 473 83 140 188 60 46 122 180

90 EA-31 131 19 150 160 488 89 146 188 60 49 122 180
110 EA-31 161 19 175 191 520 104 167 188 60 56 122 180
140 EA-31 187 23 210 216 547 117 181 188 60 64 122 180
160 EA-31 215 24 241 241 568 130 189 188 60 72 122 180
225 EA-42 267 23 290 295 635 158 210 208 60 73 122 180

d L3 Q1 Q2
[mm] [mm] [mm] [mm]
63 250 40

75 250 54 35
90 250 67 50
110 250 88 74
140 250 113 97
160 250 139 123
225 250 178 169

PF 3 39 643 033

154
Butterfly valve type 140 PVC-C 24V
Model:
bar)
[l ⁄ min]
63 2 50 10 1470 199 140 282 1 3.189 199 140 302 1 3.193

75 2 ∕2
1
65 10 2200 199 140 283 1 4.301 199 140 303 1 4.312
90 3 80 10 3000 199 140 284 1 4.484 199 140 304 1 4.491
110 4 100 10 6500 199 140 285 1 5.119 199 140 305 1 5.133
140 5 125 10 11500 199 140 286 1 4.719 199 140 306 1 4.737
160 6 150 10 16600 199 140 287 1 6.701 199 140 307 1 6.724
225 8 200 10 39600 199 140 288 1 12.966 199 140 308 1 12.994

d PTFE
[mm] Code
63 199 140 742

75 199 140 743

90 199 140 744
110 199 140 745
140 199 140 746
160 199 140 747
225 199 140 748

d Actuator d2 D D1 D1 H H1 H2 H3 L L1 L2 Q1
[mm] [mm]
63 EA-31 104 19 120 125 400 77 134 188 45 122 180 40

75 EA-31 115 19 140 145 413 83 140 188 46 122 180 54

90 EA-31 131 19 150 160 428 89 146 188 49 122 180 67
110 EA-31 161 19 175 191 460 104 167 188 56 122 180 88
140 EA-31 187 23 210 216 487 117 181 188 64 122 180 113
160 EA-31 215 24 241 241 508 130 189 188 72 122 180 139
225 EA-42 267 23 290 295 575 158 210 208 73 122 180 178

d Q2
[mm] [mm]
63

75 35
90 50
110 74
140 97
160 123
225 169

PF 3 39 643 033

155
Butterfly valve type 140 PVC-C 24V
Model:
bar)
[l ⁄ min]
63 2 50 10 1470 199 140 242 1 5.678 199 140 262 1 4.233

75 2 ∕2
1
65 10 2200 199 140 243 1 5.801 199 140 263 1 5.812
90 3 80 10 3000 199 140 244 1 5.984 199 140 264 1 5.991
110 4 100 10 6500 199 140 245 1 6.619 199 140 265 1 6.633
140 5 125 10 11500 199 140 246 1 5.732 199 140 266 1 5.750
160 6 150 10 16600 199 140 247 1 8.201 199 140 267 1 8.224
225 8 200 10 39600 199 140 248 1 14.466 199 140 268 1 14.494

d PTFE
[mm] Code
63 199 140 782

75 199 140 783

90 199 140 784
110 199 140 785
140 199 140 786
160 199 140 787
225 199 140 788

d Actuator d2 D D1 D1 H H1 H2 H3 H4 L L1 L2
[mm] [mm]
63 EA-31 104 19 120 125 460 77 134 188 60 45 122 180

75 EA-31 115 19 140 145 473 83 140 188 60 46 122 180

90 EA-31 131 19 150 160 488 89 146 188 60 49 122 180
110 EA-31 161 19 175 191 520 104 167 188 60 56 122 180
140 EA-31 187 23 210 216 547 117 181 188 60 64 122 180
160 EA-31 215 24 241 241 568 130 189 188 60 72 122 180
225 EA-42 267 23 290 295 635 158 210 208 60 73 122 180

d L3 Q1 Q2
[mm] [mm] [mm] [mm]
63 250 40

75 250 54 35
90 250 67 50
110 250 88 74
140 250 113 97
160 250 139 123
225 250 178 169

PF 3 39 643 033

156
Lugstyle butterfly valve type 141 PVC-C 100-230V
Model:
• Voltage 100-230 V, 50-60 Hz
bar)
[l ⁄ min]
63 2 50 10 1470 199 141 202 1 6.281 199 141 222 1 6.281

75 2 ∕2
1
65 10 2200 199 141 203 1 6.648 199 141 223 1 6.648
90 3 80 10 3000 199 141 204 1 7.702 199 141 224 1 7.702
110 4 100 10 6500 199 141 205 1 9.217 199 141 225 1 9.217
140 5 125 10 11500 199 141 206 1 11.205 199 141 226 1 11.205
160 6 150 10 16600 199 141 207 1 13.184 199 141 227 1 13.184
225 8 200 10 39600 199 141 208 1 22.942 199 141 228 1 22.942

d PTFE
[mm] Code
63 199 141 722

75 199 141 723

90 199 141 724
110 199 141 725
140 199 141 726
160 199 141 727
225 199 141 728

d Actuator d2 D D1 H H1 H2 H3 L L1 L2 L3 Q1
[mm] unit type [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
63 EA-31 150 M16 125 399 77 134 188 45 122 180 150 40

75 EA-31 170 M16 145 411 83 140 188 46 122 180 160 54
90 EA-31 184 M16 160 423 89 146 188 49 122 180 205 67
110 EA-31 216 M16 180 459 104 167 188 56 122 180 244 88
140 EA-31 246 M16 210 486 117 181 188 64 122 180 272 113
160 EA-31 273 M20 240 507 130 189 188 72 122 180 297 139
225 EA-42 334 M20 295 576 158 210 208 73 122 180 360 178

d Q2
[mm] [mm]
63

75 35
90 50
110 74
140 97
160 123
PF 3 39 643 034 225 169

157
Lugstyle butterfly valve type 141 PVC-C 100-230V
Model:
• Voltage 100-230 V, 50-60 Hz
bar)
[l ⁄ min]
63 2 50 10 1470 199 141 162 1 7.781 199 141 182 1 7.781

75 2 ∕2
1
65 10 2200 199 141 163 1 8.148 199 141 183 1 8.148
90 3 80 10 3000 199 141 164 1 9.202 199 141 184 1 9.202
110 4 100 10 6500 199 141 165 1 10.717 199 141 185 1 10.717
140 5 125 10 11500 199 141 166 1 12.705 199 141 186 1 12.705
160 6 150 10 16600 199 141 167 1 14.684 199 141 187 1 14.684
225 8 200 10 39600 199 141 168 1 24.442 199 141 188 1 24.442

d PTFE
[mm] Code
63 199 141 762

75 199 141 763

90 199 141 764
110 199 141 765
140 199 141 766
160 199 141 767
225 199 141 768

d Actuator d2 D D1 H H1 H2 H3 H4 L L1 L2 L3
63 EA-31 150 M16 125 459 77 134 188 60 45 122 180 150

75 EA-31 170 M16 145 471 83 140 188 60 46 122 180 160
90 EA-31 184 M16 160 483 89 146 188 60 49 122 180 205
110 EA-31 216 M16 180 519 104 167 188 60 56 122 180 244
140 EA-31 246 M16 210 546 117 181 188 60 64 122 180 272
160 EA-31 273 M20 240 567 130 189 188 60 72 122 180 297
225 EA-42 334 M20 295 636 158 210 208 60 73 122 180 360

d L4 Q1 Q2
[mm] [mm] [mm] [mm]
63 200 40

75 200 54 35
90 200 67 50
110 250 88 74
140 250 113 97
160 250 139 123
PF 3 39 643 034 225 250 178 169

158
Lugstyle butterfly valve type 141 PVC-C 24V
Model:
bar)
[l ⁄ min]
63 2 50 10 1470 199 141 282 1 6.281 199 141 302 1 6.281

75 2 ∕2
1
65 10 2200 199 141 283 1 6.648 199 141 303 1 6.648
90 3 80 10 3000 199 141 284 1 7.702 199 141 304 1 7.702
110 4 100 10 6500 199 141 285 1 9.217 199 141 305 1 9.217
140 5 125 10 11500 199 141 286 1 11.205 199 141 306 1 11.205
160 6 150 10 16600 199 141 287 1 13.184 199 141 307 1 13.184
225 8 200 10 39600 199 141 288 1 22.942 199 141 308 1 22.942

d PTFE
[mm] Code
63 199 141 742

75 199 141 743

90 199 141 744
110 199 141 745
140 199 141 746
160 199 141 747
225 199 141 748

d Actuator d2 D D1 H H1 H2 H3 L L1 L2 L3 Q1
63 EA-31 150 M16 125 399 77 134 188 45 122 180 150 40

75 EA-31 170 M16 145 411 83 140 188 46 122 180 160 54
90 EA-31 184 M16 160 423 89 146 188 49 122 180 205 67
110 EA-31 216 M16 180 459 104 167 188 56 122 180 244 88
140 EA-31 246 M16 210 486 117 181 188 64 122 180 272 113
160 EA-31 273 M20 240 507 130 189 188 72 122 180 297 139
225 EA-42 334 M20 295 576 158 210 208 73 122 180 360 178

d Q2
[mm] [mm]
63

75 35
90 50
110 74
140 97
160 123
PF 3 39 643 034 225 169

159
Lugstyle butterfly valve type 141 PVC-C 24V
Model:
bar)
[l ⁄ min]
63 2 50 10 1470 199 141 242 1 7.781 199 141 262 1 7.781

75 2 ∕2
1
65 10 2200 199 141 243 1 8.148 199 141 263 1 8.148
90 3 80 10 3000 199 141 244 1 9.202 199 141 264 1 9.202
110 4 100 10 6500 199 141 245 1 10.717 199 141 265 1 10.717
140 5 125 10 11500 199 141 246 1 12.705 199 141 266 1 12.705
160 6 150 10 16600 199 141 247 1 14.684 199 141 267 1 14.684
225 8 200 10 39600 199 141 248 1 24.442 199 141 268 1 24.442

d PTFE
[mm] Code
63 199 141 782

75 199 141 783

90 199 141 784
110 199 141 785
140 199 141 786
160 199 141 787
225 199 141 788

d Actuator d2 D D1 H H1 H2 H3 H4 L L1 L2 L3
63 EA-31 150 M16 125 459 77 134 188 60 45 122 180 150

75 EA-31 170 M16 145 471 83 140 188 60 46 122 180 160
90 EA-31 184 M16 160 483 89 146 188 60 49 122 180 205
110 EA-31 216 M16 180 519 104 167 188 60 56 122 180 244
140 EA-31 246 M16 210 546 117 181 188 60 64 122 180 272
160 EA-31 273 M20 240 567 130 189 188 60 72 122 180 297
225 EA-42 334 M20 295 636 158 210 208 60 73 122 180 360

d L4 Q1 Q2
[mm] [mm] [mm] [mm]
63 200 40

75 200 54 35
90 200 67 50
110 250 88 74
140 250 113 97
160 250 139 123
PF 3 39 643 034 225 250 178 169

160
Butterfly valves pneumatic
Model:
bar)
[l ⁄ min]
63 2 50 10 1470 199 240 162 1 3.218 199 240 182 1 3.218

75 2 ∕2
1
65 10 2200 199 240 163 1 3.341 199 240 183 1 3.352
90 3 80 10 3000 199 240 164 1 3.524 199 240 184 1 3.531
110 4 100 10 6500 199 240 165 1 5.271 199 240 185 1 5.371
140 5 125 10 11500 199 240 166 1 7.169 199 240 186 1 5.943
160 6 150 10 16600 199 240 167 1 10.184 199 240 187 1 10.285
225 8 200 10 39600 199 240 168 1 14.466 199 240 188 1 14.494

d PTFE
[mm] Code
63 199 240 642

75 199 240 643

90 199 240 644
110 199 240 645
140 199 240 646
160 199 240 647
225 199 240 648

d Actuator d2 D D1 D1 H H1 H2 H3 H4 H5 L L1
[mm] [mm]
63 PA-30 FC 104 19 120 125 327 77 134 117 70 15 45 276

75 PA-30 FC 115 19 140 145 340 83 140 117 70 15 46 276

90 PA-35 FC 131 19 150 160 361 89 146 126 78 15 49 326
110 PA-40 FC 161 19 175 191 400 104 167 129 86 56 370
140 PA-45 FC 187 23 210 216 436 117 181 139 96 64 411
160 PA-50 FC 215 24 241 241 468 130 189 149 106 72 423
225 PA-55 FC 267 23 290 295 529 158 210 161 118 73 452

d L2 Q1 Q2
[mm] [mm] [mm] [mm]
63 65 40

75 65 54 35
90 72 67 50
110 80 88 74
140 90 113 97
160 100 139 123
PF 3 39 644 033 225 112 178 169

161
Model:
bar)
[l ⁄ min]
63 2 50 10 1470 199 240 202 1 3.439 199 240 222 1 3.443

75 2 ∕2
1
65 10 2200 199 240 203 1 3.341 199 240 223 1 3.352
90 3 80 10 3000 199 240 204 1 3.524 199 240 224 1 3.531
110 4 100 10 6500 199 240 205 1 5.357 199 240 225 1 5.371
140 5 125 10 11500 199 240 206 1 7.169 199 240 226 1 7.187
160 6 150 10 16600 199 240 207 1 10.262 199 240 227 1 10.285
225 8 200 10 39600 199 240 208 1 14.466 199 240 228 1 14.494

d PTFE
[mm] Code
63 199 240 662

75 199 240 663

90 199 240 664
110 199 240 665
140 199 240 666
160 199 240 667
225 199 240 668

[mm] [mm]
63 PA-30 FO 104 19 120 125 327 77 134 117 70 15 45 276

75 PA-30 FO 115 19 140 145 340 83 140 117 70 15 46 276

90 PA-35 FO 131 19 150 160 361 89 146 126 78 15 49 326
110 PA-40 FO 161 19 175 191 400 104 167 129 86 56 370
140 PA-45 FO 187 23 210 216 436 117 181 139 96 64 411
160 PA-50 FO 215 24 241 241 468 130 189 149 106 72 423
225 PA-55 FO 267 23 290 295 529 158 210 161 118 73 452

d L2 Q1 Q2
[mm] [mm] [mm] [mm]
63 65 40

75 65 54 35
90 72 67 50
110 80 88 74
140 90 113 97
160 100 139 123
PF 3 39 644 033 225 112 178 169

162
DA (Double acting)
Model:
bar)
[l ⁄ min]
63 2 50 10 1470 199 240 242 1 5.184 199 240 262 1 2.293

75 2 ∕2
1
65 10 2200 199 240 243 1 2.191 199 240 263 1 2.202
90 3 80 10 3000 199 240 244 1 2.884 199 240 264 1 2.862
110 4 100 10 6500 199 240 245 1 3.609 199 240 265 1 3.623
140 5 125 10 11500 199 240 246 1 4.419 199 240 266 1 4.500
160 6 150 10 16600 199 240 247 1 6.741 199 240 267 1 6.764
225 8 200 10 39600 199 240 248 1 8.466 199 240 268 1 8.494

d PTFE
[mm] Code
63 199 240 682

75 199 240 683

90 199 240 684
110 199 240 685
140 199 240 686
160 199 240 687
225 199 240 688

[mm] [mm]
63 PA-35 DA 104 19 120 125 317 77 134 107 60 15 45 177

75 PA-35 DA 115 19 140 145 330 83 140 107 60 15 46 177

90 PA-40 DA 131 19 150 160 348 89 146 113 66 15 49 190
110 PA-45 DA 161 19 175 191 372 104 167 102 71 56 235
140 PA-45 DA 187 23 210 216 408 117 181 111 78 64 235
160 PA-55 DA 215 24 241 241 448 130 189 129 86 72 279
225 PA-55 DA 267 23 290 295 507 158 210 139 96 73 279

d L2 Q1 Q2
[mm] [mm] [mm] [mm]
63 55 40

75 55 54 35
90 60 67 50
110 65 88 74
140 72 113 97
160 80 139 123
PF 3 39 644 031 225 90 178 169

163
Model:
bar)
[l ⁄ min]
63 2 50 10 1470 199 241 162 0 5.321 199 241 182 0 5.321

75 2 ∕2
1
65 10 2200 199 241 163 0 5.688 199 241 183 0 5.688
90 3 80 10 3000 199 241 164 0 6.742 199 241 184 0 6.742
110 4 100 10 6500 199 241 165 0 9.455 199 241 185 0 9.455
140 5 125 10 11500 199 241 166 0 12.445 199 241 186 0 12.445
160 6 150 10 16600 199 241 167 1 16.745 199 241 187 1 16.745
225 8 200 10 39600 199 241 168 0 24.442 199 241 188 0 24.442

d PTFE
[mm] Code
63 199 241 642

75 199 241 643

90 199 241 644
110 199 241 645
140 199 241 646
160 199 241 647
225 199 241 648

d Actuator d2 D D1 H H1 H2 H3 H4 H5 L L1 L2
63 PA-30 FC 150 M16 125 328 77 134 117 70 15 45 276 65

75 PA-30 FC 170 M16 145 340 83 140 117 70 15 46 276 65

90 PA-35 FC 184 M16 160 361 89 146 126 78 15 49 326 72
110 PA-40 FC 216 M16 180 400 104 167 129 86 56 370 80
140 PA-45 FC 246 M16 210 437 117 181 139 96 64 411 90
160 PA-50 FC 273 M20 240 468 130 189 149 106 72 423 100
225 PA-55 FC 334 M20 295 529 158 210 161 118 73 452 112

d L3 Q1 Q2
[mm] [mm] [mm] [mm]
63 150 40

75 160 54 35
90 205 67 50
110 244 88 74
140 272 113 97
160 297 139 123
PF 3 39 644 034 225 360 178 169

164
Model:
bar)
[l ⁄ min]
63 2 50 10 1470 199 241 202 0 5.321 199 241 222 0 5.321

75 2 ∕2
1
65 10 2200 199 241 203 0 5.688 199 241 223 0 5.688
90 3 80 10 3000 199 241 204 0 6.742 199 241 224 0 6.742
110 4 100 10 6500 199 241 205 0 9.455 199 241 225 0 9.455
140 5 125 10 11500 199 241 206 0 12.445 199 241 226 0 12.445
160 6 150 10 16600 199 241 207 1 16.745 199 241 227 1 16.745
225 8 200 10 39600 199 241 208 0 24.442 199 241 228 0 24.442

d PTFE
[mm] Code
63 199 241 662

75 199 241 663

90 199 241 664
110 199 241 665
140 199 241 666
160 199 241 667
225 199 241 668

63 PA-30 FO 150 M16 125 328 77 134 117 70 15 45 276 65

75 PA-30 FO 170 M16 145 340 83 140 117 70 15 46 276 65

90 PA-35 FO 184 M16 160 361 89 146 126 78 15 49 326 72
110 PA-40 FO 216 M16 180 400 104 167 129 86 56 370 80
140 PA-45 FO 246 M16 210 437 117 181 139 96 64 411 90
160 PA-50 FO 273 M20 240 468 130 189 149 106 72 423 100
225 PA-55 FO 334 M20 295 529 158 210 161 118 73 452 112

d L3 Q1 Q2
[mm] [mm] [mm] [mm]
63 150 40

75 160 54 35
90 205 67 50
110 244 88 74
140 272 113 97
160 297 139 123
PF 3 39 644 034 225 360 178 169

165
DA (Double acting)
Model:
bar)
[l ⁄ min]
63 2 50 10 1470 199 241 242 0 4.171 199 241 262 0 4.171

75 2 ∕2
1
65 10 2200 199 241 243 0 4.538 199 241 263 0 4.538
90 3 80 10 3000 199 241 244 0 6.073 199 241 264 0 6.073
110 4 100 10 6500 199 241 245 0 7.707 199 241 265 0 7.707
140 5 125 10 11500 199 241 246 0 9.695 199 241 266 0 9.695
160 6 150 10 16600 199 241 247 0 13.224 199 241 267 0 13.224
225 8 200 10 39600 199 241 248 0 18.442 199 241 268 0 18.442

d PTFE
[mm] Code
63 199 241 682

75 199 241 683

90 199 241 684
110 199 241 685
140 199 241 686
160 199 241 687
225 199 241 688

63 PA-35 DA 150 M16 125 318 77 134 107 60 15 45 177 55

75 PA-35 DA 170 M16 145 330 83 140 107 60 15 46 177 55

90 PA-40 DA 184 M16 160 348 89 146 113 66 15 49 190 60
110 PA-45 DA 216 M16 180 373 104 167 102 71 56 235 65
140 PA-45 DA 246 M16 210 409 117 181 111 78 64 235 72
160 PA-55 DA 273 M20 240 448 130 189 129 86 72 279 80
225 PA-55 DA 334 M20 295 507 158 210 139 96 73 279 90

d L3 Q1 Q2
[mm] [mm] [mm] [mm]
63 150 40

75 160 54 35
90 205 67 50
110 244 88 74
140 272 113 97
160 297 139 123
PF 3 39 644 034 225 360 178 169

166
Index
Code Page Code Page Code Page
161 486 100 77 163 517 114 59 163 543 103 55

161 486 101 77 163 517 115 59 163 543 104 55

161 486 102 77 163 517 116 59 163 543 105 55
161 486 103 77 163 517 117 59 163 543 106 55
161 486 104 77 163 517 132 59 163 543 107 55
161 486 105 77 163 517 133 59 163 543 111 55
161 486 106 77 163 517 134 59 163 543 112 55
161 486 107 77 163 517 135 59 163 543 113 55
163 017 130 6 163 517 136 59 163 543 114 55
163 017 131 6 163 517 137 59 163 543 115 55
163 017 132 6 163 543 001 51 163 543 116 55
163 017 133 6 163 543 002 51 163 543 117 55
163 017 134 6 163 543 003 51 163 543 201 45
163 017 135 6 163 543 004 51 163 543 202 45
163 017 136 6 163 543 005 51 163 543 203 45
163 017 137 6 163 543 006 51 163 543 204 45
163 017 138 6 163 543 007 51 163 543 205 45
163 017 139 6 163 543 011 51 163 543 206 45
163 017 142 6 163 543 012 51 163 543 207 45
163 017 187 6 163 543 013 51 163 543 211 45
163 017 188 6 163 543 014 51 163 543 212 45
163 017 189 6 163 543 015 51 163 543 213 45
163 017 192 6 163 543 016 51 163 543 214 45
163 017 195 6 163 543 017 51 163 543 215 45
163 305 302 77 163 543 021 53 163 543 216 45
163 305 303 77 163 543 022 53 163 543 217 45
163 305 304 77 163 543 023 53 163 543 221 47
163 305 305 77 163 543 024 53 163 543 222 47
163 305 306 77 163 543 025 53 163 543 223 47
163 305 307 77 163 543 026 53 163 543 224 47
163 305 317 77 163 543 027 53 163 543 225 47
163 305 318 77 163 543 031 53 163 543 226 47
163 305 319 77 163 543 032 53 163 543 227 47
163 305 320 77 163 543 033 53 163 543 231 47
163 305 321 77 163 543 034 53 163 543 232 47
163 305 322 77 163 543 035 53 163 543 233 47
163 317 024 60 163 543 036 53 163 543 234 47
163 317 025 60 163 543 037 53 163 543 235 47
163 317 039 60 163 543 041 54 163 543 236 47
163 317 040 60 163 543 042 54 163 543 237 47
163 317 523 60 163 543 043 54 163 543 241 48
163 317 538 60 163 543 044 54 163 543 242 48
163 514 012 58 163 543 045 54 163 543 243 48
163 514 013 58 163 543 046 54 163 543 244 48
163 514 014 58 163 543 047 54 163 543 245 48
163 514 015 58 163 543 051 54 163 543 246 48
163 514 016 58 163 543 052 54 163 543 247 48
163 514 017 58 163 543 053 54 163 543 251 48
163 514 032 58 163 543 054 54 163 543 252 48
163 514 033 58 163 543 055 54 163 543 253 48
163 514 034 58 163 543 056 54 163 543 254 48
163 514 035 58 163 543 057 54 163 543 255 48
163 514 036 58 163 543 081 57 163 543 256 48
163 514 037 58 163 543 082 57 163 543 257 48
163 515 012 58 163 543 083 57 163 543 301 49
163 515 013 58 163 543 084 57 163 543 302 49
163 515 014 58 163 543 085 57 163 543 303 49
163 515 015 58 163 543 086 57 163 543 304 49
163 515 016 58 163 543 087 57 163 543 305 49
163 515 017 58 163 543 091 57 163 543 306 49
163 515 032 58 163 543 092 57 163 543 307 49
163 515 033 58 163 543 093 57 163 543 311 49
163 515 034 58 163 543 094 57 163 543 312 49
163 515 035 58 163 543 095 57 163 543 313 49
163 515 036 58 163 543 096 57 163 543 314 49
163 515 037 58 163 543 097 57 163 543 315 49
163 517 112 59 163 543 101 55 163 543 316 49
163 517 113 59 163 543 102 55 163 543 317 49

167
Index
163 543 381 52 163 546 073 38 163 546 389 40

163 543 382 52 163 546 074 38 163 546 390 40

163 543 383 52 163 546 075 38 163 546 391 40
163 543 384 52 163 546 076 38 163 546 392 40
163 543 385 52 163 546 077 38 163 546 393 40
163 543 386 52 163 546 078 38 163 546 394 40
163 543 387 52 163 546 079 38 163 546 395 40
163 543 391 52 163 546 080 38 163 546 396 40
163 543 392 52 163 546 081 39 163 546 397 40
163 543 393 52 163 546 082 39 163 546 398 40
163 543 394 52 163 546 083 39 163 546 399 40
163 543 395 52 163 546 084 39 163 546 400 40
163 543 396 52 163 546 085 39 163 546 401 42
163 543 397 52 163 546 086 39 163 546 402 42
163 543 401 46 163 546 087 39 163 546 403 42
163 543 402 46 163 546 088 39 163 546 404 42
163 543 403 46 163 546 089 39 163 546 405 42
163 543 404 46 163 546 090 39 163 546 406 42
163 543 405 46 163 546 091 39 163 546 407 42
163 543 406 46 163 546 092 39 163 546 408 42
163 543 407 46 163 546 093 39 163 546 409 42
163 543 411 46 163 546 094 39 163 546 410 42
163 543 412 46 163 546 095 39 163 546 411 42
163 543 413 46 163 546 096 39 163 546 412 42
163 543 414 46 163 546 097 39 163 546 413 42
163 543 415 46 163 546 098 39 163 546 414 42
163 543 416 46 163 546 099 39 163 546 415 42
163 543 417 46 163 546 100 39 163 546 416 42
163 543 421 56 163 546 108 41 163 546 417 42
163 543 422 56 163 546 109 41 163 546 418 42
163 543 423 56 163 546 110 41 163 546 419 42
163 543 424 56 163 546 118 41 163 546 420 42
163 543 425 56 163 546 119 41 163 561 001 67
163 543 426 56 163 546 120 41 163 561 002 67
163 543 427 56 163 546 168 44 163 561 003 67
163 543 431 56 163 546 169 44 163 561 004 67
163 543 432 56 163 546 170 44 163 561 005 67
163 543 433 56 163 546 178 44 163 561 006 67
163 543 434 56 163 546 179 44 163 561 007 67
163 543 435 56 163 546 180 44 163 561 008 67
163 543 436 56 163 546 341 43 163 561 009 67
163 543 437 56 163 546 342 43 163 561 010 67
163 543 441 50 163 546 343 43 163 561 011 67
163 543 442 50 163 546 344 43 163 561 012 67
163 543 443 50 163 546 345 43 163 561 013 67
163 543 444 50 163 546 346 43 163 561 014 67
163 543 445 50 163 546 347 43 163 561 015 67
163 543 446 50 163 546 348 43 163 561 016 67
163 543 447 50 163 546 349 43 163 561 017 67
163 543 451 50 163 546 350 43 163 561 018 67
163 543 452 50 163 546 351 43 163 561 019 67
163 543 453 50 163 546 352 43 163 561 020 67
163 543 454 50 163 546 353 43 163 561 021 68
163 543 455 50 163 546 354 43 163 561 022 68
163 543 456 50 163 546 355 43 163 561 023 68
163 543 457 50 163 546 356 43 163 561 024 68
163 546 061 38 163 546 357 43 163 561 025 68
163 546 062 38 163 546 358 43 163 561 026 68
163 546 063 38 163 546 359 43 163 561 027 68
163 546 064 38 163 546 360 43 163 561 028 68
163 546 065 38 163 546 381 40 163 561 029 68
163 546 066 38 163 546 382 40 163 561 030 68
163 546 067 38 163 546 383 40 163 561 031 68
163 546 068 38 163 546 384 40 163 561 032 68
163 546 069 38 163 546 385 40 163 561 033 68
163 546 070 38 163 546 386 40 163 561 034 68
163 546 071 38 163 546 387 40 163 561 035 68
163 546 072 38 163 546 388 40 163 561 036 68

168
Index
163 561 037 68 163 567 065 63 163 568 203 65

163 561 038 68 163 567 066 63 163 568 204 65

163 561 039 68 163 567 067 63 163 568 205 65
163 561 040 68 163 567 068 63 163 568 206 65
163 562 001 69 163 567 202 62 163 568 207 65
163 562 002 69 163 567 203 62 163 568 208 65
163 562 003 69 163 567 204 62 163 568 242 66
163 562 004 69 163 567 205 62 163 568 243 66
163 562 005 69 163 567 206 62 163 568 244 66
163 562 006 69 163 567 207 62 163 568 245 66
163 562 007 69 163 567 208 62 163 568 246 66
163 562 008 69 163 567 242 63 163 568 247 66
163 562 009 69 163 567 243 63 163 568 248 66
163 562 010 69 163 567 244 63 163 568 802 64
163 562 011 69 163 567 245 63 163 568 803 64
163 562 012 69 163 567 246 63 163 568 804 64
163 562 013 69 163 567 247 63 163 568 805 64
163 562 014 69 163 567 248 63 163 568 806 64
163 562 015 69 163 567 802 61 163 568 807 64
163 562 016 69 163 567 803 61 163 568 808 64
163 562 017 69 163 567 804 61 163 568 822 64
163 562 018 69 163 567 805 61 163 568 823 64
163 562 019 69 163 567 806 61 163 568 824 64
163 562 020 69 163 567 807 61 163 568 825 64
163 562 021 70 163 567 808 61 163 568 826 64
163 562 022 70 163 567 822 61 163 568 827 64
163 562 023 70 163 567 823 61 163 568 828 64
163 562 024 70 163 567 824 61 163 568 832 64
163 562 025 70 163 567 825 61 163 568 833 64
163 562 026 70 163 567 826 61 163 568 834 64
163 562 027 70 163 567 827 61 163 568 835 64
163 562 028 70 163 567 828 61 163 568 836 64
163 562 029 70 163 567 832 61 163 568 837 64
163 562 030 70 163 567 833 61 163 568 838 64
163 562 031 70 163 567 834 61 163 582 001 72
163 562 032 70 163 567 835 61 163 582 002 72
163 562 033 70 163 567 836 61 163 582 003 72
163 562 034 70 163 567 837 61 163 582 004 72
163 562 035 70 163 567 838 61 163 582 005 72
163 562 036 70 163 568 002 65 163 582 006 72
163 562 037 70 163 568 003 65 163 582 007 72
163 562 038 70 163 568 004 65 163 582 011 72
163 562 039 70 163 568 005 65 163 582 012 72
163 562 040 70 163 568 006 65 163 582 013 72
163 567 002 62 163 568 007 65 163 582 014 72
163 567 003 62 163 568 008 65 163 582 015 72
163 567 004 62 163 568 022 65 163 582 016 72
163 567 005 62 163 568 023 65 163 582 017 72
163 567 006 62 163 568 024 65 163 582 021 73
163 567 007 62 163 568 025 65 163 582 022 73
163 567 008 62 163 568 026 65 163 582 023 73
163 567 022 62 163 568 027 65 163 582 024 73
163 567 023 62 163 568 028 65 163 582 025 73
163 567 024 62 163 568 042 66 163 582 026 73
163 567 025 62 163 568 043 66 163 582 027 73
163 567 026 62 163 568 044 66 163 582 031 73
163 567 027 62 163 568 045 66 163 582 032 73
163 567 028 62 163 568 046 66 163 582 033 73
163 567 042 63 163 568 047 66 163 582 034 73
163 567 043 63 163 568 048 66 163 582 035 73
163 567 044 63 163 568 062 66 163 582 036 73
163 567 045 63 163 568 063 66 163 582 037 73
163 567 046 63 163 568 064 66 163 582 102 74
163 567 047 63 163 568 065 66 163 582 103 74
163 567 048 63 163 568 066 66 163 582 104 74
163 567 062 63 163 568 067 66 163 582 105 74
163 567 063 63 163 568 068 66 163 582 106 74
163 567 064 63 163 568 202 65 163 582 107 74

169
Index
163 582 112 74 163 595 005 71 163 627 136 140

163 582 113 74 163 595 006 71 163 627 137 140
163 582 114 74 163 595 007 71 163 644 012 141
163 582 115 74 163 595 008 71 163 644 013 141
163 582 116 74 163 595 009 71 163 644 014 141
163 582 117 74 163 595 010 71 163 644 015 141
163 582 122 75 163 595 011 71 163 644 016 141
163 582 123 75 163 595 012 71 163 644 017 141
163 582 124 75 163 595 013 71 163 644 032 141
163 582 125 75 163 595 014 71 163 644 033 141
163 582 126 75 163 595 015 71 163 644 034 141
163 582 127 75 163 595 016 71 163 644 035 141
163 582 132 75 163 595 017 71 163 644 036 141
163 582 133 75 163 595 018 71 163 644 037 141
163 582 134 75 163 595 019 71 163 645 012 142
163 582 135 75 163 595 020 71 163 645 013 142
163 582 136 75 163 614 012 135 163 645 014 142
163 582 137 75 163 614 013 135 163 645 015 142
163 586 001 76 163 614 014 135 163 645 016 142
163 586 002 76 163 614 015 135 163 645 017 142
163 586 003 76 163 614 016 135 163 645 032 142
163 586 004 76 163 614 017 135 163 645 033 142
163 586 005 76 163 615 012 136 163 645 034 142
163 586 006 76 163 615 013 136 163 645 035 142
163 586 007 76 163 615 014 136 163 645 036 142
163 586 011 76 163 615 015 136 163 645 037 142
163 586 012 76 163 615 016 136 163 647 112 143
163 586 013 76 163 615 017 136 163 647 113 143
163 586 014 76 163 617 112 137 163 647 114 143
163 586 015 76 163 617 113 137 163 647 115 143
163 586 016 76 163 617 114 137 163 647 116 143
163 586 017 76 163 617 115 137 163 647 117 143
163 586 102 76 163 617 116 137 163 647 132 143
163 586 103 76 163 617 117 137 163 647 133 143
163 586 104 76 163 624 012 138 163 647 134 143
163 586 105 76 163 624 013 138 163 647 135 143
163 586 106 76 163 624 014 138 163 647 136 143
163 586 107 76 163 624 015 138 163 647 137 143
163 586 112 76 163 624 016 138 163 654 012 144
163 586 113 76 163 624 017 138 163 654 013 144
163 586 114 76 163 624 032 138 163 654 014 144
163 586 115 76 163 624 033 138 163 654 015 144
163 586 116 76 163 624 034 138 163 654 016 144
163 586 117 76 163 624 035 138 163 654 017 144
163 591 001 71 163 624 036 138 163 654 032 144
163 591 002 71 163 624 037 138 163 654 033 144
163 591 003 71 163 625 012 139 163 654 034 144
163 591 004 71 163 625 013 139 163 654 035 144
163 591 005 71 163 625 014 139 163 654 036 144
163 591 006 71 163 625 015 139 163 654 037 144
163 591 007 71 163 625 016 139 163 655 012 145
163 591 008 71 163 625 017 139 163 655 013 145
163 591 009 71 163 625 032 139 163 655 014 145
163 591 010 71 163 625 033 139 163 655 015 145
163 591 011 71 163 625 034 139 163 655 016 145
163 591 012 71 163 625 035 139 163 655 017 145
163 591 013 71 163 625 036 139 163 655 032 145
163 591 014 71 163 625 037 139 163 655 033 145
163 591 015 71 163 627 112 140 163 655 034 145
163 591 016 71 163 627 113 140 163 655 035 145
163 591 017 71 163 627 114 140 163 655 036 145
163 591 018 71 163 627 115 140 163 655 037 145
163 591 019 71 163 627 116 140 163 657 112 146
163 591 020 71 163 627 117 140 163 657 113 146
163 595 001 71 163 627 132 140 163 657 114 146
163 595 002 71 163 627 133 140 163 657 115 146
163 595 003 71 163 627 134 140 163 657 116 146
163 595 004 71 163 627 135 140 163 657 117 146

170
Index
163 657 132 146 167 061 040 29, 32 199 104 107 102

163 657 133 146 167 061 041 29, 32 199 104 108 102
163 657 134 146 167 061 153 29 199 104 112 102
163 657 135 146 167 061 155 29 199 104 113 102
163 657 136 146 167 061 156 29 199 104 114 102
163 657 137 146 167 061 157 29 199 104 115 102
163 684 012 147 167 061 158 29 199 104 116 102
163 684 013 147 167 061 159 29 199 104 117 102
163 684 014 147 167 061 160 29 199 104 118 102
163 684 015 147 167 061 161 29 199 104 142 102
163 684 016 147 167 061 162 29 199 104 143 102
163 684 017 147 167 061 163 29 199 104 144 102
163 684 032 147 167 061 164 29 199 104 145 102
163 684 033 147 167 061 165 29 199 104 146 102
163 684 034 147 167 061 166 29 199 104 147 102
163 684 035 147 167 061 167 29 199 104 148 102
163 684 036 147 173 061 003 30 199 104 152 102
163 684 037 147 173 061 004 30 199 104 153 102
163 685 012 148 173 061 005 30 199 104 154 102
163 685 013 148 173 061 006 30 199 104 155 102
163 685 014 148 173 061 007 30 199 104 156 102
163 685 015 148 173 061 008 30 199 104 157 102
163 685 016 148 173 061 009 30 199 104 158 102
163 685 017 148 173 061 010 30 199 107 102 80
163 685 032 148 173 061 011 30 199 107 103 80
163 685 033 148 173 061 012 30 199 107 104 80
163 685 034 148 173 061 013 30 199 107 105 80
163 685 035 148 173 061 014 30 199 107 106 80
163 685 036 148 173 061 015 30 199 107 107 80
163 685 037 148 173 061 016 30 199 107 108 80
163 687 112 149 173 061 017 30 199 107 112 80
163 687 113 149 173 061 153 31 199 107 113 80
163 687 114 149 173 061 155 31 199 107 114 80
163 687 115 149 173 061 156 31 199 107 115 80
163 687 116 149 173 061 157 31 199 107 116 80
163 687 117 149 173 061 158 31 199 107 117 80
163 687 132 149 173 061 159 31 199 107 118 80
163 687 133 149 173 061 160 31 199 107 122 81
163 687 134 149 173 061 161 31 199 107 123 81
163 687 135 149 173 061 162 31 199 107 124 81
163 687 136 149 173 061 163 31 199 107 125 81
163 687 137 149 173 061 164 31 199 107 126 81
167 060 019 31 173 061 165 31 199 107 127 81
167 060 020 31 173 061 166 31 199 107 128 81
167 060 021 31 173 061 167 31 199 107 132 81
167 060 022 31 199 025 697 150 199 107 133 81
167 060 023 31 199 025 698 150 199 107 134 81
167 060 024 31 199 025 699 150 199 107 135 81
167 060 025 31 199 025 707 151 199 107 136 81
167 060 038 31 199 025 708 151 199 107 137 81
167 060 039 31 199 025 709 151 199 107 138 81
167 060 040 31 199 025 717 152 199 107 142 83
167 060 041 31 199 025 718 152 199 107 143 83
167 060 042 31 199 025 719 152 199 107 144 83
167 060 043 31 199 025 727 150 199 107 145 83
167 061 003 29 199 025 728 150 199 107 146 83
167 061 004 29 199 025 729 150 199 107 147 83
167 061 012 29 199 025 737 151 199 107 148 83
167 061 013 29 199 025 738 151 199 107 152 83
167 061 014 29 199 025 739 151 199 107 153 83
167 061 015 29 199 025 747 152 199 107 154 83
167 061 016 29 199 025 748 152 199 107 155 83
167 061 017 29 199 025 749 152 199 107 156 83
167 061 035 29, 32 199 104 102 102 199 107 157 83
167 061 036 29, 32 199 104 103 102 199 107 158 83
167 061 037 29, 32 199 104 104 102 199 107 162 84
167 061 038 29, 32 199 104 105 102 199 107 163 84
167 061 039 29, 32 199 104 106 102 199 107 164 84

171
Index
199 107 165 84 199 130 211 92 199 130 459 90

199 107 166 84 199 130 212 92 199 130 460 90

199 107 167 84 199 130 213 92 199 130 461 90
199 107 168 84 199 130 214 92 199 130 462 91
199 107 172 84 199 130 215 92 199 130 463 91
199 107 173 84 199 130 216 92 199 130 464 91
199 107 174 84 199 130 217 92 199 130 465 91
199 107 175 84 199 130 218 92 199 130 466 91
199 107 176 84 199 130 219 92 199 130 467 91
199 107 177 84 199 130 220 92 199 130 468 91
199 107 178 84 199 130 221 92 199 130 469 91
199 107 702 82 199 130 402 86 199 130 470 91
199 107 703 82 199 130 403 86 199 130 471 91
199 107 704 82 199 130 404 86 199 130 472 91
199 107 705 82 199 130 405 86 199 130 473 91
199 107 706 82 199 130 406 86 199 130 474 91
199 107 707 82 199 130 407 86 199 130 475 91
199 107 708 82 199 130 408 86 199 130 476 91
199 107 712 82 199 130 409 86 199 130 477 91
199 107 713 82 199 130 410 86 199 130 478 91
199 107 714 82 199 130 411 86 199 130 479 91
199 107 715 82 199 130 412 86 199 130 480 91
199 107 716 82 199 130 413 86 199 130 481 91
199 107 717 82 199 130 414 86 199 134 489 89
199 107 718 82 199 130 415 86 199 134 490 89
199 107 742 85 199 130 416 86 199 134 491 89
199 107 743 85 199 130 417 86 199 134 499 89
199 107 744 85 199 130 418 86 199 134 500 89
199 107 745 85 199 130 419 86 199 134 501 89
199 107 746 85 199 130 420 86 199 134 509 93
199 107 747 85 199 130 421 86 199 134 510 93
199 107 748 85 199 130 422 87 199 134 511 93
199 107 752 85 199 130 423 87 199 134 519 93
199 107 753 85 199 130 424 87 199 134 520 93
199 107 754 85 199 130 425 87 199 134 521 93
199 107 755 85 199 130 426 87 199 140 162 154
199 107 756 85 199 130 427 87 199 140 163 154
199 107 757 85 199 130 428 87 199 140 164 154
199 107 758 85 199 130 429 87 199 140 165 154
199 130 182 88 199 130 430 87 199 140 166 154
199 130 183 88 199 130 431 87 199 140 167 154
199 130 184 88 199 130 432 87 199 140 168 154
199 130 185 88 199 130 433 87 199 140 182 154
199 130 186 88 199 130 434 87 199 140 183 154
199 130 187 88 199 130 435 87 199 140 184 154
199 130 188 88 199 130 436 87 199 140 185 154
199 130 189 88 199 130 437 87 199 140 186 154
199 130 190 88 199 130 438 87 199 140 187 154
199 130 191 88 199 130 439 87 199 140 188 154
199 130 192 88 199 130 440 87 199 140 202 153
199 130 193 88 199 130 441 87 199 140 203 153
199 130 194 88 199 130 442 90 199 140 204 153
199 130 195 88 199 130 443 90 199 140 205 153
199 130 196 88 199 130 444 90 199 140 206 153
199 130 197 88 199 130 445 90 199 140 207 153
199 130 198 88 199 130 446 90 199 140 208 153
199 130 199 88 199 130 447 90 199 140 222 153
199 130 200 88 199 130 448 90 199 140 223 153
199 130 201 88 199 130 449 90 199 140 224 153
199 130 202 92 199 130 450 90 199 140 225 153
199 130 203 92 199 130 451 90 199 140 226 153
199 130 204 92 199 130 452 90 199 140 227 153
199 130 205 92 199 130 453 90 199 140 228 153
199 130 206 92 199 130 454 90 199 140 242 156
199 130 207 92 199 130 455 90 199 140 243 156
199 130 208 92 199 130 456 90 199 140 244 156
199 130 209 92 199 130 457 90 199 140 245 156
199 130 210 92 199 130 458 90 199 140 246 156

172
Index
199 140 247 156 199 141 205 157 199 185 083 99

199 140 248 156 199 141 206 157 199 185 084 99
199 140 262 156 199 141 207 157 199 185 085 99
199 140 263 156 199 141 208 157 199 185 086 99
199 140 264 156 199 141 222 157 199 185 087 99
199 140 265 156 199 141 223 157 199 185 088 99
199 140 266 156 199 141 224 157 199 185 092 99
199 140 267 156 199 141 225 157 199 185 093 99
199 140 268 156 199 141 226 157 199 185 094 99
199 140 282 155 199 141 227 157 199 185 095 99
199 140 283 155 199 141 228 157 199 185 096 99
199 140 284 155 199 141 242 160 199 185 097 99
199 140 285 155 199 141 243 160 199 185 098 99
199 140 286 155 199 141 244 160 199 185 102 98
199 140 287 155 199 141 245 160 199 185 103 98
199 140 288 155 199 141 246 160 199 185 104 98
199 140 302 155 199 141 247 160 199 185 105 98
199 140 303 155 199 141 248 160 199 185 106 98
199 140 304 155 199 141 262 160 199 185 107 98
199 140 305 155 199 141 263 160 199 185 108 98
199 140 306 155 199 141 264 160 199 185 112 98
199 140 307 155 199 141 265 160 199 185 113 98
199 140 308 155 199 141 266 160 199 185 114 98
199 140 722 153 199 141 267 160 199 185 115 98
199 140 723 153 199 141 268 160 199 185 116 98
199 140 724 153 199 141 282 159 199 185 117 98
199 140 725 153 199 141 283 159 199 185 118 98
199 140 726 153 199 141 284 159 199 185 122 95
199 140 727 153 199 141 285 159 199 185 123 95
199 140 728 153 199 141 286 159 199 185 124 95
199 140 742 155 199 141 287 159 199 185 125 95
199 140 743 155 199 141 288 159 199 185 126 95
199 140 744 155 199 141 302 159 199 185 127 95
199 140 745 155 199 141 303 159 199 185 128 95
199 140 746 155 199 141 304 159 199 185 132 95
199 140 747 155 199 141 305 159 199 185 133 95
199 140 748 155 199 141 306 159 199 185 134 95
199 140 762 154 199 141 307 159 199 185 135 95
199 140 763 154 199 141 308 159 199 185 136 95
199 140 764 154 199 141 722 157 199 185 137 95
199 140 765 154 199 141 723 157 199 185 138 95
199 140 766 154 199 141 724 157 199 185 142 94
199 140 767 154 199 141 725 157 199 185 143 94
199 140 768 154 199 141 726 157 199 185 144 94
199 140 782 156 199 141 727 157 199 185 145 94
199 140 783 156 199 141 728 157 199 185 146 94
199 140 784 156 199 141 742 159 199 185 147 94
199 140 785 156 199 141 743 159 199 185 148 94
199 140 786 156 199 141 744 159 199 185 152 94
199 140 787 156 199 141 745 159 199 185 153 94
199 140 788 156 199 141 746 159 199 185 154 94
199 141 162 158 199 141 747 159 199 185 155 94
199 141 163 158 199 141 748 159 199 185 156 94
199 141 164 158 199 141 762 158 199 185 157 94
199 141 165 158 199 141 763 158 199 185 158 94
199 141 166 158 199 141 764 158 199 185 262 100
199 141 167 158 199 141 765 158 199 185 263 100
199 141 168 158 199 141 766 158 199 185 264 100
199 141 182 158 199 141 767 158 199 185 265 100
199 141 183 158 199 141 768 158 199 185 266 100
199 141 184 158 199 141 782 160 199 185 267 100
199 141 185 158 199 141 783 160 199 185 268 100
199 141 186 158 199 141 784 160 199 185 272 100
199 141 187 158 199 141 785 160 199 185 273 100
199 141 188 158 199 141 786 160 199 185 274 100
199 141 202 157 199 141 787 160 199 185 275 100
199 141 203 157 199 141 788 160 199 185 276 100
199 141 204 157 199 185 082 99 199 185 277 100

173
Index
199 185 278 100 199 230 436 109 199 230 531 106

199 185 282 101 199 230 437 109 199 230 532 106
199 185 283 101 199 230 438 109 199 230 533 106
199 185 284 101 199 230 442 114 199 230 534 106
199 185 285 101 199 230 443 114 199 230 535 106
199 185 286 101 199 230 444 114 199 230 536 106
199 185 287 101 199 230 445 114 199 230 537 106
199 185 288 101 199 230 446 114 199 230 538 106
199 185 292 101 199 230 447 114 199 230 539 106
199 185 293 101 199 230 448 114 199 230 540 106
199 185 294 101 199 230 452 114 199 230 541 106
199 185 295 101 199 230 453 114 199 230 542 108
199 185 296 101 199 230 454 114 199 230 543 108
199 185 297 101 199 230 455 114 199 230 544 108
199 185 298 101 199 230 456 114 199 230 545 108
199 185 302 97 199 230 457 114 199 230 546 108
199 185 303 97 199 230 458 114 199 230 547 108
199 185 304 97 199 230 462 116 199 230 548 108
199 185 305 97 199 230 463 116 199 230 549 108
199 185 306 97 199 230 464 116 199 230 550 108
199 185 307 97 199 230 465 116 199 230 551 108
199 185 308 97 199 230 466 116 199 230 552 108
199 185 312 97 199 230 467 116 199 230 553 108
199 185 313 97 199 230 468 116 199 230 554 108
199 185 314 97 199 230 472 116 199 230 555 108
199 185 315 97 199 230 473 116 199 230 556 108
199 185 316 97 199 230 474 116 199 230 557 108
199 185 317 97 199 230 475 116 199 230 558 108
199 185 318 97 199 230 476 116 199 230 559 108
199 185 322 96 199 230 477 116 199 230 560 108
199 185 323 96 199 230 478 116 199 230 561 108
199 185 324 96 199 230 482 121 199 230 562 113
199 185 325 96 199 230 483 121 199 230 563 113
199 185 326 96 199 230 484 121 199 230 564 113
199 185 327 96 199 230 485 121 199 230 565 113
199 185 328 96 199 230 486 121 199 230 566 113
199 185 332 96 199 230 487 121 199 230 567 113
199 185 333 96 199 230 488 121 199 230 568 113
199 185 334 96 199 230 492 121 199 230 569 113
199 185 335 96 199 230 493 121 199 230 570 113
199 185 336 96 199 230 494 121 199 230 571 113
199 185 337 96 199 230 495 121 199 230 572 113
199 185 338 96 199 230 496 121 199 230 573 113
199 230 402 107 199 230 497 121 199 230 574 113
199 230 403 107 199 230 498 121 199 230 575 113
199 230 404 107 199 230 502 123 199 230 576 113
199 230 405 107 199 230 503 123 199 230 577 113
199 230 406 107 199 230 504 123 199 230 578 113
199 230 407 107 199 230 505 123 199 230 579 113
199 230 408 107 199 230 506 123 199 230 580 113
199 230 412 107 199 230 507 123 199 230 581 113
199 230 413 107 199 230 508 123 199 230 582 115
199 230 414 107 199 230 512 123 199 230 583 115
199 230 415 107 199 230 513 123 199 230 584 115
199 230 416 107 199 230 514 123 199 230 585 115
199 230 417 107 199 230 515 123 199 230 586 115
199 230 418 107 199 230 516 123 199 230 587 115
199 230 422 109 199 230 517 123 199 230 588 115
199 230 423 109 199 230 518 123 199 230 589 115
199 230 424 109 199 230 522 106 199 230 590 115
199 230 425 109 199 230 523 106 199 230 591 115
199 230 426 109 199 230 524 106 199 230 592 115
199 230 427 109 199 230 525 106 199 230 593 115
199 230 428 109 199 230 526 106 199 230 594 115
199 230 432 109 199 230 527 106 199 230 595 115
199 230 433 109 199 230 528 106 199 230 596 115
199 230 434 109 199 230 529 106 199 230 597 115
199 230 435 109 199 230 530 106 199 230 598 115

174
Index
199 230 599 115 199 230 816 118 199 230 953 124

199 230 600 115 199 230 817 118 199 230 954 124
199 230 601 115 199 230 818 118 199 230 955 124
199 230 602 120 199 230 832 125 199 230 956 124
199 230 603 120 199 230 833 125 199 230 957 124
199 230 604 120 199 230 834 125 199 230 958 124
199 230 605 120 199 230 835 125 199 230 959 124
199 230 606 120 199 230 836 125 199 230 960 124
199 230 607 120 199 230 837 125 199 230 961 124
199 230 608 120 199 230 838 125 199 234 609 112
199 230 609 120 199 230 852 125 199 234 610 112
199 230 610 120 199 230 853 125 199 234 611 112
199 230 611 120 199 230 854 125 199 234 619 112
199 230 612 120 199 230 855 125 199 234 620 112
199 230 613 120 199 230 856 125 199 234 621 112
199 230 614 120 199 230 857 125 199 234 629 119
199 230 615 120 199 230 858 125 199 234 630 119
199 230 616 120 199 230 872 110 199 234 631 119
199 230 617 120 199 230 873 110 199 234 639 119
199 230 618 120 199 230 874 110 199 234 640 119
199 230 619 120 199 230 875 110 199 234 641 119
199 230 620 120 199 230 876 110 199 234 649 126
199 230 621 120 199 230 877 110 199 234 650 126
199 230 622 122 199 230 878 110 199 234 651 126
199 230 623 122 199 230 879 110 199 234 659 126
199 230 624 122 199 230 880 110 199 234 660 126
199 230 625 122 199 230 881 110 199 234 661 126
199 230 626 122 199 230 892 110 199 240 162 161
199 230 627 122 199 230 893 110 199 240 163 161
199 230 628 122 199 230 894 110 199 240 164 161
199 230 629 122 199 230 895 110 199 240 165 161
199 230 630 122 199 230 896 110 199 240 166 161
199 230 631 122 199 230 897 110 199 240 167 161
199 230 632 122 199 230 898 110 199 240 168 161
199 230 633 122 199 230 899 110 199 240 182 161
199 230 634 122 199 230 900 110 199 240 183 161
199 230 635 122 199 230 901 110 199 240 184 161
199 230 636 122 199 230 912 117 199 240 185 161
199 230 637 122 199 230 913 117 199 240 186 161
199 230 638 122 199 230 914 117 199 240 187 161
199 230 639 122 199 230 915 117 199 240 188 161
199 230 640 122 199 230 916 117 199 240 202 162
199 230 641 122 199 230 917 117 199 240 203 162
199 230 752 111 199 230 918 117 199 240 204 162
199 230 753 111 199 230 919 117 199 240 205 162
199 230 754 111 199 230 920 117 199 240 206 162
199 230 755 111 199 230 921 117 199 240 207 162
199 230 756 111 199 230 932 117 199 240 208 162
199 230 757 111 199 230 933 117 199 240 222 162
199 230 758 111 199 230 934 117 199 240 223 162
199 230 772 111 199 230 935 117 199 240 224 162
199 230 773 111 199 230 936 117 199 240 225 162
199 230 774 111 199 230 937 117 199 240 226 162
199 230 775 111 199 230 938 117 199 240 227 162
199 230 776 111 199 230 939 117 199 240 228 162
199 230 777 111 199 230 940 117 199 240 242 163
199 230 778 111 199 230 941 117 199 240 243 163
199 230 792 118 199 230 942 124 199 240 244 163
199 230 793 118 199 230 943 124 199 240 245 163
199 230 794 118 199 230 944 124 199 240 246 163
199 230 795 118 199 230 945 124 199 240 247 163
199 230 796 118 199 230 946 124 199 240 248 163
199 230 797 118 199 230 947 124 199 240 262 163
199 230 798 118 199 230 948 124 199 240 263 163
199 230 812 118 199 230 949 124 199 240 264 163
199 230 813 118 199 230 950 124 199 240 265 163
199 230 814 118 199 230 951 124 199 240 266 163
199 230 815 118 199 230 952 124 199 240 267 163

175
Index
199 240 268 163 199 241 646 164 199 285 154 127

199 240 642 161 199 241 647 164 199 285 155 127
199 240 643 161 199 241 648 164 199 285 156 127
199 240 644 161 199 241 662 165 199 285 157 127
199 240 645 161 199 241 663 165 199 285 158 127
199 240 646 161 199 241 664 165 199 285 262 134
199 240 647 161 199 241 665 165 199 285 263 134
199 240 648 161 199 241 666 165 199 285 264 134
199 240 662 162 199 241 667 165 199 285 265 134
199 240 663 162 199 241 668 165 199 285 266 134
199 240 664 162 199 241 682 166 199 285 267 134
199 240 665 162 199 241 683 166 199 285 268 134
199 240 666 162 199 241 684 166 199 285 272 134
199 240 667 162 199 241 685 166 199 285 273 134
199 240 668 162 199 241 686 166 199 285 274 134
199 240 682 163 199 241 687 166 199 285 275 134
199 240 683 163 199 241 688 166 199 285 276 134
199 240 684 163 199 285 082 132 199 285 277 134
199 240 685 163 199 285 083 132 199 285 278 134
199 240 686 163 199 285 084 132 199 285 282 133
199 240 687 163 199 285 085 132 199 285 283 133
199 240 688 163 199 285 086 132 199 285 284 133
199 241 162 164 199 285 087 132 199 285 285 133
199 241 163 164 199 285 088 132 199 285 286 133
199 241 164 164 199 285 092 132 199 285 287 133
199 241 165 164 199 285 093 132 199 285 288 133
199 241 166 164 199 285 094 132 199 285 292 133
199 241 167 164 199 285 095 132 199 285 293 133
199 241 168 164 199 285 096 132 199 285 294 133
199 241 182 164 199 285 097 132 199 285 295 133
199 241 183 164 199 285 098 132 199 285 296 133
199 241 184 164 199 285 102 131 199 285 297 133
199 241 185 164 199 285 103 131 199 285 298 133
199 241 186 164 199 285 104 131 199 285 302 130
199 241 187 164 199 285 105 131 199 285 303 130
199 241 188 164 199 285 106 131 199 285 304 130
199 241 202 165 199 285 107 131 199 285 305 130
199 241 203 165 199 285 108 131 199 285 306 130
199 241 204 165 199 285 112 131 199 285 307 130
199 241 205 165 199 285 113 131 199 285 308 130
199 241 206 165 199 285 114 131 199 285 312 130
199 241 207 165 199 285 115 131 199 285 313 130
199 241 208 165 199 285 116 131 199 285 314 130
199 241 222 165 199 285 117 131 199 285 315 130
199 241 223 165 199 285 118 131 199 285 316 130
199 241 224 165 199 285 122 128 199 285 317 130
199 241 225 165 199 285 123 128 199 285 318 130
199 241 226 165 199 285 124 128 199 285 322 129
199 241 227 165 199 285 125 128 199 285 323 129
199 241 228 165 199 285 126 128 199 285 324 129
199 241 242 166 199 285 127 128 199 285 325 129
199 241 243 166 199 285 128 128 199 285 326 129
199 241 244 166 199 285 132 128 199 285 327 129
199 241 245 166 199 285 133 128 199 285 328 129
199 241 246 166 199 285 134 128 199 285 332 129
199 241 247 166 199 285 135 128 199 285 333 129
199 241 248 166 199 285 136 128 199 285 334 129
199 241 262 166 199 285 137 128 199 285 335 129
199 241 263 166 199 285 138 128 199 285 336 129
199 241 264 166 199 285 142 127 199 285 337 129
199 241 265 166 199 285 143 127 199 285 338 129
199 241 266 166 199 285 144 127 720 600 236 22
199 241 267 166 199 285 145 127 720 600 237 22
199 241 268 166 199 285 146 127 720 600 238 22
199 241 642 164 199 285 147 127 720 600 239 22
199 241 643 164 199 285 148 127 720 600 240 22
199 241 644 164 199 285 152 127 720 600 241 22
199 241 645 164 199 285 153 127 720 600 242 22

176
Index
720 600 243 22 723 200 135 10 723 510 186 14

720 600 246 21 723 200 137 10 723 510 187 14

720 600 247 21 723 200 138 10 723 510 188 14
720 600 248 21 723 200 142 10 723 510 189 14
720 600 249 21 723 200 145 10 723 510 205 15
720 600 250 21 723 200 147 10 723 510 206 15
720 600 251 21 723 200 151 10 723 510 207 15
720 600 252 21 723 200 164 10 723 510 208 15
720 600 253 21 723 200 170 10 723 510 209 15
720 600 257 21 723 200 178 10 723 510 210 15
720 600 258 21 723 200 184 10 723 510 211 15
720 600 268 21 723 250 106 9 723 510 230 15
723 000 106 7 723 250 107 9 723 510 231 15
723 000 107 7 723 250 108 9 723 510 232 15
723 000 108 7 723 250 109 9 723 510 233 15
723 000 109 7 723 250 110 9 723 510 234 15
723 000 110 7 723 250 111 9 723 510 235 15
723 000 111 7 723 250 112 9 723 510 236 15
723 000 112 7 723 250 113 9 723 510 313 14
723 000 113 7 723 250 114 9 723 510 338 14
723 000 114 7 723 300 108 9 723 514 105 15
723 000 117 7 723 300 111 9 723 514 106 15
723 010 120 7 723 310 006 13 723 514 107 15
723 100 105 8 723 310 007 13 723 514 108 15
723 100 106 8 723 310 008 13 723 514 109 15
723 100 107 8 723 310 009 13 723 514 110 15
723 100 108 8 723 310 010 13 723 514 111 15
723 100 109 8 723 310 011 13 723 514 130 15
723 100 110 8 723 310 036 13 723 514 131 15
723 100 111 8 723 310 037 13 723 514 132 15
723 100 112 8 723 310 038 13 723 514 133 15
723 100 113 8 723 310 039 13 723 514 134 15
723 100 114 8 723 310 040 13 723 514 135 15
723 100 117 8 723 310 041 13 723 514 136 15
723 100 206 12 723 510 105 14 723 530 306 17
723 100 207 12 723 510 106 14 723 530 307 17
723 100 208 12 723 510 107 14 723 530 308 17
723 100 209 12 723 510 108 14 723 530 309 17
723 100 210 12 723 510 109 14 723 530 310 17
723 100 211 12 723 510 110 14 723 530 311 17
723 150 105 8 723 510 111 14 723 530 806 18
723 150 106 8 723 510 112 14 723 530 807 18
723 150 107 8 723 510 114 14 723 530 808 18
723 150 108 8 723 510 130 14 723 530 809 18
723 150 109 8 723 510 131 14 723 530 810 18
723 150 110 8 723 510 132 14 723 530 811 18
723 150 111 8 723 510 133 14 723 540 205 16
723 150 112 8 723 510 134 14 723 540 206 16
723 150 113 8 723 510 135 14 723 540 207 16
723 150 114 8 723 510 136 14 723 540 208 16
723 150 117 8 723 510 137 14 723 540 209 16
723 150 120 8 723 510 139 14 723 540 210 16
723 200 009 10 723 510 155 14 723 540 211 16
723 200 010 10 723 510 156 14 723 540 230 16
723 200 011 10 723 510 157 14 723 540 231 16
723 200 105 8 723 510 158 14 723 540 232 16
723 200 106 8 723 510 159 14 723 540 233 16
723 200 107 8 723 510 160 14 723 540 234 16
723 200 108 8 723 510 161 14 723 540 235 16
723 200 109 8 723 510 162 14 723 540 236 16
723 200 110 8 723 510 163 14 723 540 705 16
723 200 111 8 723 510 164 14 723 540 706 16
723 200 112 8 723 510 180 14 723 540 707 16
723 200 113 8 723 510 181 14 723 540 708 16
723 200 114 8 723 510 182 14 723 540 709 16
723 200 117 8 723 510 183 14 723 540 710 16
723 200 120 8 723 510 184 14 723 540 711 16
723 200 134 10 723 510 185 14 723 540 730 16

177
Index
723 540 731 16 723 800 105 20 723 910 210 12

723 540 732 16 723 800 106 20 723 910 211 12

723 540 733 16 723 800 107 20 723 910 342 11
723 540 734 16 723 800 108 20 723 910 347 11
723 540 735 16 723 800 109 20 723 910 354 11
723 540 736 16 723 800 110 20 723 910 360 11
723 545 505 17 723 800 111 20 723 910 366 11
723 545 506 17 723 800 162 20 723 910 371 11
723 545 507 17 723 800 163 20 723 910 434 12
723 545 508 17 723 800 164 20 723 910 437 12
723 545 509 17 723 810 117 23 723 910 441 12
723 545 510 17 723 810 120 23 723 910 446 12
723 545 511 17 723 840 105 20 723 910 452 12
723 545 530 17 723 840 106 20 723 910 458 12
723 545 531 17 723 840 107 20 723 910 505 13
723 545 532 17 723 840 108 20 723 910 556 13
723 545 533 17 723 840 109 20 723 910 557 13
723 545 534 17 723 840 110 20 723 910 558 13
723 545 535 17 723 840 111 20 723 910 559 13
723 545 536 17 723 840 112 20 723 910 560 13
723 550 506 18 723 840 114 20 723 910 561 13
723 550 507 18 723 840 123 20 723 960 105 11
723 550 508 18 723 840 605 20 723 960 106 11
723 550 509 18 723 840 606 20 723 960 107 11
723 550 510 18 723 840 607 20 723 960 108 11
723 550 511 18 723 840 608 20 723 960 109 11
723 550 906 18 723 840 609 20 723 960 110 11
723 550 907 18 723 840 610 20 723 960 111 11
723 550 908 18 723 840 611 20 723 960 112 11
723 550 909 18 723 900 334 10 723 960 113 11
723 550 910 18 723 900 337 10 723 960 114 11
723 550 911 18 723 900 341 10 723 960 117 11
723 550 957 18 723 900 342 10 723 960 405 11
723 550 958 18 723 900 346 10 723 960 406 11
723 550 967 18 723 900 347 10 723 960 407 11
723 550 968 18 723 900 348 10 723 960 408 11
723 602 005 21 723 900 352 10 724 600 206 21
723 602 006 21 723 900 353 10 724 600 207 21
723 602 007 21 723 900 354 10 724 600 208 21
723 602 008 21 723 900 355 10 724 600 209 21
723 602 009 21 723 900 358 10 724 600 210 21
723 602 010 21 723 900 359 10 724 600 211 21
723 602 011 21 723 900 360 10 724 600 212 21
723 602 012 21 723 900 364 10 724 600 213 21
723 602 013 21 723 900 365 10 724 600 655 22
723 602 014 21 723 900 370 10 724 600 656 22
723 690 005 19 723 900 371 10 724 600 657 22
723 690 006 19 723 900 372 10 724 600 658 22
723 690 007 19 723 900 376 10 724 600 659 22
723 690 008 19 723 900 378 10 724 600 660 22
723 690 009 19 723 900 390 10 724 600 661 22
723 690 010 19 723 900 396 10 724 600 705 22
723 690 011 19 723 910 105 9 724 600 706 22
723 690 012 19 723 910 106 9 724 600 707 22
723 690 013 19 723 910 107 9 724 600 708 22
723 690 014 19 723 910 108 9 724 600 709 22
723 790 106 23 723 910 109 9 724 600 710 22
723 790 107 23 723 910 110 9 724 600 711 22
723 790 108 23 723 910 111 9 724 600 806 21
723 790 109 23 723 910 112 9 724 600 807 21
723 790 110 23 723 910 113 9 724 600 808 21
723 790 111 23 723 910 114 9 724 600 809 21
723 790 112 23 723 910 117 9 724 600 810 21
723 790 113 23 723 910 120 9 724 600 811 21
723 790 114 23 723 910 206 12 724 600 812 21
723 790 117 23 723 910 207 12 724 600 813 21
723 790 119 23 723 910 208 12 727 700 217 26
723 790 120 23 723 910 209 12 727 700 406 24

178
Index
Code Page Code Page
727 700 407 24 748 440 713 28

727 700 408 24 748 440 714 28

727 700 409 24 748 440 715 28
727 700 410 24 748 440 716 28
727 700 411 24 748 440 717 28
727 700 412 24 748 440 719 28
727 700 413 24 748 440 720 28
727 700 414 24 749 410 004 19
727 700 416 24 749 410 005 19
727 700 417 24, 25 749 410 006 19
727 700 419 24, 25 749 410 007 19
727 700 420 24, 25 749 410 008 19
727 700 421 24 749 410 009 19
727 701 206 26 749 410 010 19
727 701 207 26 749 410 011 19
727 701 208 26 749 410 014 19
727 701 209 26 749 410 016 19
727 701 210 26 749 410 019 28
727 701 211 26 749 410 022 28
727 701 212 26 749 410 248 19
727 701 213 26 749 440 705 28
727 701 214 26 749 440 706 28
727 701 220 26 749 440 707 28
727 701 406 25 749 440 708 28
727 701 407 25 749 440 709 28
727 701 408 25 749 440 710 28
727 701 409 25 749 440 711 28
727 701 410 25 749 440 712 28
727 701 411 25 749 440 713 28
727 701 412 25 749 440 714 28
727 701 413 25 749 440 715 28
727 701 414 25 749 440 716 28
748 400 305 27 749 440 717 28
748 400 306 27 749 440 719 28
748 400 307 27 749 440 720 28
748 400 308 27 790 109 001 34
748 400 309 27 790 109 002 34
748 400 310 27 790 109 003 34
748 400 311 27 790 109 011 34
748 400 312 27 790 109 012 34
748 400 313 27 790 109 013 34
748 400 314 27 790 109 107 34
748 400 315 27 790 109 108 34
748 400 316 27 790 114 028 34
748 400 317 27 799 298 010 33
748 400 319 27 799 298 016 33
748 400 320 27 799 298 027 33
748 410 004 19 799 298 028 33
748 410 005 19 799 299 001 33
748 410 006 19 799 299 002 33
748 410 007 19 799 299 003 34
748 410 008 19 799 299 004 34
748 410 009 19 799 299 005 34
748 410 010 19 799 350 364 34
748 410 011 19 799 495 145 34
748 410 014 19 799 495 146 34
748 410 016 19
748 410 019 28

748 410 022 28
748 410 248 19
748 440 705 28
748 440 706 28
748 440 707 28
748 440 708 28
748 440 709 28
748 440 710 28
748 440 711 28
748 440 712 28

179
Notes
180
Notes
181
Notes
182
General Condition of Supply of Georg Fischer Piping Systems Limited, Schaffhausen
1 General Purchaser shall be entitled to prove, that Georg Fischer has suffered no or a considerably lower
1.1 These General Conditions shall apply to all Products supplied by Georg Fischer Piping Systems damage than the penalty forfeited.
Limited («Georg Fischer») to the Purchaser.
11 Packing
They shall also apply to all future business even when no express reference is made to them.
If the Products are provided with additional packing over and above the standard packing, such
1.2 Any deviating or supplementary conditions especially Purchaser’s general conditions of purchase
packing shall be charged additionally.
and verbal agreements shall only be applicable if accepted in writing by Georg Fischer.
1.3 The written form shall be deemed to be fulfilled by all forms of transmission, evidenced in the form 12 Passing of Risk
of text, such as telefax, e-mail, etc. 12.1 The risk in the Products shall pass to the Purchaser as soon as they have left Georg Fischer’s
works (EX WORKS, Incoterms 2010 ICC, or latest version), even if delivery is made carriage-paid,
2 Tenders
under similar clauses or including installation or when carriage is organized and managed by
Tenders shall only be binding if they contain a specifically stated period for acceptance.
Georg Fischer.
3 Scope of Delivery 12.2 If delivery is delayed for reasons beyond Georg Fischer’s control, the risk shall pass to the
3.1 Georg Fischer’s product range is subject to change. Purchaser when he is notified that the Products are ready for despatch.
3.2 The confirmation of order shall govern the scope and execution of the contract.
13 Carriage and Insurance
4 Data and Documents 13.1 Unless agreed otherwise, the Purchaser shall bear the cost of carriage.
4.1 Technical documents such as drawings, descriptions, illustrations and data on dimensions, 13.2 The Purchaser shall be responsible for transport insurance against damage of whatever kind.
performance and weight as well as the reference to standards are for information purposes only. Even when such insurance is arranged by Georg Fischer it shall be deemed taken out by the order
They are not warranted characteristics and are subject to change. of and for the account of the Purchaser and at his risk.
4.2 All technical documents shall remain the exclusive property of Georg Fischer and may only be 13.3 Special requests regarding carriage and insurance shall be communicated to Georg Fischer in
used for the agreed purposes or as Georg Fischer may consent. due time. Otherwise carriage shall be arranged by Georg Fischer at their discretion, but without
responsibility, by the quickest and cheapest method possible.
5 Confidentiality, Protection of Personal Data
In case of carriage-paid delivery transport arrangements shall be made by Georg Fischer. If the
5.1 Each party shall keep in strict confidence all commercial or technical information relating to the
Purchaser specifies particular requirements, any extra costs involved shall be borne by him.
business of the other party, of which it has gained knowledge in the course of its dealing with the
13.4 In the event of damage or loss of the Products during carriage the Purchaser shall mark the
other party. Such information shall neither be disclosed to third parties nor used for other
delivery documents accordingly and immediately have the damage ascertained by the carrier.
purposes than those for which the information has been supplied.
Not readily ascertainable damages sustained during carriage shall be notified to the carrier within
5.2 In the context of the contractual relation with the Purchaser personal data may be processed. The
six (6) days after receipt of the Products.
Purchaser agrees to the disclosure of said data to third parties such as foreign subcontractors and
suppliers etc . 14 Inspection, Notification of Defects and Damages
14.1 The Products will be subject to normal inspection by Georg Fischer during manufacture.
6 Local Laws and Regulations, Export Controls
Additional tests required by the Purchaser shall be agreed upon in writing and shall be charged to
6.1 The Purchaser shall bring to the attention of Georg Fischer all local laws and regulations at the
the Purchaser.
place of destination which bear connection with the execution of the contract and the adherence to
14.2 It shall be a condition of Georg Fischer’s obligation under the warranties stated hereinafter that
relevant safety regulations and approval procedures.
Georg Fischer be notified in writing by the Purchaser of any purported defect immediately upon
6.2 In case of re-exports, Purchaser shall be responsible for compliance with pertinent export control
discovery. Notice concerning weight, numbers or apparent defects is to be given latest within
regulations.
30 days from receipt of the Products, notice of other defects immediately latest within seven (7)
7 Price working days after discovery, in any event within the agreed warranty period.
7.1 Unless agreed otherwise, the prices shall be deemed quoted net ex works (according to Incoterms 14.3 Purchaser shall not dispose of allegedly defective Products until all warranty and/or damage
2010 of the ICC, or latest version) including standard packing. All supplementary costs such as claims are finally settled. At its request, defective Products are to be placed at Georg Fischer‘s
the cost of carriage, insurance, export-, transit- and import- licences etc. shall be borne by the disposal.
Purchaser. The Purchaser shall also bear the costs of all taxes, fees, duties etc. connected with 14.4 At its request, Georg Fischer shall be given the opportunity to inspect the defect and/or damage,
the contract. prior to commencement of remedial work, either itself or by third party experts.
7.2 If the costs of packing, carriage, insurance, fees and other supplementary costs are included in
15 Warranty
the tender price or contract price or are referred to specifically in the tender or confirmation of
15.1 At the written request of the Purchaser, Georg Fischer undertakes to repair or replace at its
order, Georg Fischer reserve the right to revise their prices accordingly should any change occur
discretion, as quickly as possible and free of charge, all Products supplied which demonstrably
in the relevant tariffs.
suffer from faulty design, materials or workmanship, from faulty operating or installation
8 Terms of Payment instructions or which become defective or unusable due to faulty advice.
8.1 The Purchaser shall make payment in the manner agreed by the parties without any deductions In order to protect employees from toxic or radioactive substances which may have been
such as discounts, costs, taxes or dues. transported through defective parts returned to Georg Fischer‘s sales organisation, said parts
8.2 The Purchaser may only withhold or off-set payments due against counter claims which are either must be accompanied by a Material Safety Disclosure Form. The form may be obtained from
expressly acknowledged by Georg Fischer or finally awarded to the Purchaser. Georg Fischer‘s local sales company or via www.piping.georgfischer.com.
In particular, payment shall still be made when unessential items are still outstanding provided Replaced parts shall become property of Georg Fischer, unless Georg Fischer waives such claim.
that the Products already delivered are not rendered unusable as a result. 15.2 For Products which are manufactured to specifications, drawings or patterns supplied by the
9 Retention of Title Purchaser, Georg Fischer’s warranty shall be restricted to proper materials and workmanship.
9.1 The Products shall remain the property of Georg Fischer until the Purchaser shall have settled all 15.3 The Purchaser shall be entitled to rescind the contract or to demand a reduction of the contract
claims, present and future, which Georg Fischer may have against him. price if
9.2 Should the Purchaser resell Products to which title is reserved, in the ordinary course of - the repair or replacement of the defective Product is impossible
business, he shall hereby be deemed to have tacitly assigned to Georg Fischer the proceeds - the defective Product is not repaired or replaced within a reasonable period
deriving from their sale together with all collateral rights, securities and reservations of title until - Georg Fischer refuses the repair or replacement or if for reasons attributable to Georg Fischer
all claims held by Georg Fischer shall have been settled. Until revoked by Georg Fischer, this the repair or replacement is delayed.
assignment shall not preclude Purchaser‘s right to collect the assigned receivables. 15.4 For Products or essential components manufactured by a third party and supplied by
9.3 To the extent the value of the Products to which title is reserved together with collateral securities Georg Fischer under this contract, Georg Fischer’s warranty is limited to the warranty provided
exceeds Georg Fischer’s claims against the Purchaser by more than 20%, Georg Fischer shall by said third party.
re-assign the above proceeds to Purchaser at his request. 15.5 This warranty shall not apply to damage resulting from normal wear and tear, improper storage
and maintenance, failure to observe the operating instructions, overstressing or overloading,
10 Delivery unsuitable operating media, unsuitable construction work or unsuitable building ground, improper
10.1 The term of delivery shall commence as soon as the contract has been entered into, all official repairs or alterations by the Purchaser or third parties, the use of other than original spare parts
formalities such as import and payment permits have been obtained and all essential technical is- and other reasons beyond Georg Fischer’s control.
sues have been settled. The term of delivery shall be deemed duly observed when, upon its expiry, 15.6 No action or claim may be brought by the Purchaser on account of any alleged breach of warranty
the Products are ready for despatch. or any other obligation of Georg Fischer after the expiration of twelve (12) months from receipt
10.2 Delivery is subject to the following conditions, i.e. the term of delivery shall be reasonably exten- of the Products by the end user or at the latest within eighteen (18) months of the Products being
ded: despatched by Georg Fischer.
a) if Georg Fischer are not supplied in time with the information necessary for the execution of the 15.7 In case of Products for use in domestic installations or in utilities
contract or if subsequent changes causing delays are made by the Purchaser. - Georg Fischer will assume the costs of dismantling the defective Product and restoring the
b) if Georg Fischer are prevented from performing the contract by force majeure. Force majeure damaged object up to CHF 1‘000‘000 per occurrence.
shall equally be deemed to be any unforeseeable event beyond Georg Fischer’s control which - warranty or damage claims - contrary to Section 15.6 – are time-barred five (5) years from the
renders Georg Fischer’s performance commercially unpractical or impossible, such as delayed date of installation or seven (7) years from the production date, whichever is earlier.
or defective supplies from sub contractors labour disputes, governmental orders or regulati-
ons, shortages in materials or energy, serious disturbances in Georg Fischer’s works, such 16 Limitation of Liability
as the total or partial destruction of plant and equipment or the breakdown of essential facili- The rights and remedies of the customer shall be exclusively governed by these General
ties, serious disruptions in transport facilities, e.g. impassable roads. Conditions of Supply and shall be in lieu of any remedies at law. All further claims for damages,
Should the effect of force majeure exceed a period of six (6) months, either party may cancel the reduction of the purchase price, termination of or rescission of the contract are excluded.
contract forthwith. In no case whatsoever shall the customer be entitled to claim damages other than compensation
Georg Fischer shall not be liable for any damage or loss of any kind whatsoever resulting the for costs of remedying defects in the supplies. This in particular refers, but shall not be limited, to
refrom, any suspension or cancellation being without prejudice to Georg Fischer’s right to loss of production, loss of use, loss of orders, loss of profit, third party recovery claims and other
recover all sums due in respect of consignments delivered and costs incurred to date. direct or indirect or consequential damages.
c) if the Purchaser is in delay with the fulfilment of his obligations under the contract, in particular, This limitation of liability equally applies to the extent Georg Fischer is liable for acts or omissions
if he does not adhere to the agreed conditions of payment or if he has failed to timely provide the of its employees or third parties engaged for the performance of its obligations. It does not apply in
agreed securities. case unlawful intent or gross negligence on the part of Georg Fischer’s management and in case
10.3 If for reasons attributable to Georg Fischer the agreed term of delivery or a reasonable extension of Georg Fischer’s statutory liability, in particular under applicable product liability laws.
thereof is exceeded, Georg Fischer shall not be deemed in default until the Purchaser has granted 17 Severability
to Georg Fischer in writing a reasonable extension thereof of not less than one (1) month which Should any term or clause of these General Conditions in whole or in part be found to be
equally is not met. unenforceable or void, all other provisions shall remain in full force and effect and the
The Purchaser shall then be entitled to the remedies provided at law, it being however understood unenforceable or void provision shall be replaced by a valid provision, which comes closest
that, subject to limitations of Art. 16, damage claims shall be limited to max. 10% of the price of the to the original intention of the unenforceable or invalid provision.
delayed delivery.
18 Place of Performance and Jurisdiction
10.4 Part shipments shall be allowed and Georg Fischer shall be entitled to invoice for such partial
18.1 Place of performance for the Products shall be the Georg Fischer works from which the Products
deliveries.
are despatched.
10.5 If the Purchaser fails to take delivery within a reasonable time of Products notified as ready for
18.2 The contract shall be governed by Swiss law without regard to conflict of law provisions that would
despatch, Georg Fischer shall be entitled to store the Products at the Purchaser’s expense and
require the application of another law.
risk and to invoice them as delivered. If Purchaser fails to effect payment, Georg Fischer shall be
18.3 Any civil action based upon any alleged breach of this contract shall be filed and prosecuted
entitled to dispose of the Products.
exclusively in the courts of Schaffhausen, Switzerland.
10.6 Should Purchaser cancel an order without justification and should Georg Fischer not insist on
Georg Fischer however reserves the right to file actions in any court having jurisdiction over
the performance of the contract, Georg Fischer shall be entitled to a penalty amounting to 10% of
controversies arising out of or in connection with the present contract.
the contract price, Georg Fischer‘s right to prove and claim higher damages remaining reserved.
03/2011
183
GF Piping Systems
Worldwide at home
Our sales companies and representatives
ensure local customer support in over 100 countries
www.gfps.com
Argentina / Southern South America France Middle East Sweden

Georg Fischer Central Plastics Georg Fischer SAS Georg Fischer Georg Fischer AB
Sudamérica S.R.L. 95932 Roissy Charles de Gaulle Cedex Piping Systems (Switzerland) Ltd 117 43 Stockholm
Buenos Aires, Argentina Phone +33 (0) 1 41 84 68 84 Dubai, United Arab Emirates Phone +46 (0) 8 506 775 00
Phone +54 11 4512 02 90 fr.ps@georgfischer.com Phone +971 4 289 49 60 info.se.ps@georgfischer.com
gfcentral.ps.ar@georgfischer.com www.gfps.com/fr gcc.ps@georgfischer.com www.gfps.com/se
www.gfps.com/ar www.gfps.com/int
Germany Switzerland
Australia Georg Fischer GmbH Netherlands Georg Fischer
George Fischer Pty Ltd 73095 Albershausen Georg Fischer N.V. Rohrleitungssysteme (Schweiz) AG
Riverwood NSW 2210 Australia Phone +49 (0) 7161 302-0 8161 PA Epe 8201 Schaffhausen
Phone +61 (0) 2 9502 8000 info.de.ps@georgfischer.com Phone +31 (0) 578 678 222 Phone +41 (0) 52 631 30 26
australia.ps@georgfischer.com www.gfps.com/de nl.ps@georgfischer.com ch.ps@georgfischer.com
www.gfps.com/au www.gfps.com/nl www.gfps.com/ch
India
Austria Georg Fischer Piping Systems Ltd Norway Taiwan
Georg Fischer 400 076 Mumbai Georg Fischer AS Georg Fischer Co., Ltd
Rohrleitungssysteme GmbH Phone +91 224007 2001 1351 Rud San Chung Dist., New Taipei City
3130 Herzogenburg branchoffice@georgfischer.com Phone +47 67 18 29 00 Phone +886 2 8512 2822
Phone +43 (0) 2782 856 43-0 www.gfps.com/in no.ps@georgfischer.com Fax +886 2 8512 2823
austria.ps@georgfischer.com www.gfps.com/no www.gfps.com/tw
www.gfps.com/at Indonesia
George Fischer Pte Ltd – Philippines United Kingdom / Ireland
Belgium / Luxembourg Representative Office George Fischer Pte Ltd George Fischer Sales Limited
Georg Fischer NV/SA Phone +62 21 2900 8564 Representative Office Coventry, CV2 2ST
1070 Bruxelles/Brüssel Fax +62 21 2900 8566 Phone +632 571 2365 Phone +44 (0) 2476 535 535
Phone +32 (0) 2 556 40 20 sgp.ps@georgfischer.com Fax +632 571 2368 uk.ps@georgfischer.com
be.ps@georgfischer.com www.gfps.com/sg sgp.ps@georgfischer.com www.gfps.com/uk
www.gfps.com/be www.gfps.com/sg
Italy USA / Caribbean
Brazil Georg Fischer S.p.A. Poland Georg Fischer LLC
Georg Fischer Sist. de Tub. Ltda. 20063 Cernusco S/N (MI) Georg Fischer Sp. z o.o. 9271 Jeronimo Road
04795-100 São Paulo Phone +39 02 921 861 05-090 Sekocin Nowy 92618 Irvine, CA
Phone +55 (0) 11 5525 1311 it.ps@georgfischer.com Phone +48 (0) 22 31 31 0 50 Phone +1 714 731 88 00
br.ps@georgfischer.com www.gfps.com/it poland.ps@georgfischer.com Fax +1 714 731 62 01
www.gfps.com/br www.gfps.com/pl us.ps@georgfischer.com
Japan www.gfps.com/us
Canada Georg Fischer Ltd Romania
Georg Fischer Piping Systems Ltd 556-0011 Osaka, Georg Fischer Vietnam
Mississauga, ON L5T 2B2 Phone +81 (0) 6 6635 2691 Piping Systems (Switzerland) Ltd George Fischer Pte Ltd
Phone +1 (905) 670 8005 jp.ps@georgfischer.com 020257 Bucharest - Sector 2 Representative Office
Fax +1 (905) 670 8513 www.gfps.com/jp Phone +40 (0) 21 230 53 80 136E Tran Vu, Ba Dinh District, Hanoi
ca.ps@georgfischer.com ro.ps@georgfischer.com Phone +84 4 3715 3290
www.gfps.com/ca Korea www.gfps.com/int Fax +84 4 3715 3285
GF Piping Systems sgp.ps@georgfischer.com
China Georg Fischer Korea Co., Ltd. Russia www.gfps.com/sg
Georg Fischer Piping Systems Ltd Unit 2501, U-Tower Georg Fischer
Shanghai 201319 120 HeungdeokJungang-ro (Yeongdeok-dong) Piping Systems (Switzerland) Ltd International
Phone +86 21 3899 3899 Giheung-gu, Yongin-si, Gyeonggi-do, Korea Moscow 125047 Georg Fischer
china.ps@georgfischer.com Phone: +82 31 8017 1450 Phone +7 495 258 60 80 Piping Systems (Switzerland) Ltd
www.gfps.com/cn Fax : +82 31 217 1454 ru.ps@georgfischer.com 8201 Schaffhausen/Switzerland
kor.ps@georgfischer.com www.gfps.com/ru Phone +41 (0) 52 631 30 03
Denmark / Iceland www.gfps.com/kr Fax +41 (0) 52 631 28 93
Georg Fischer A/S Singapore info.export@georgfischer.com
2630 Taastrup Malaysia George Fischer Pte Ltd www.gfps.com/int
Phone +45 (0) 70 22 19 75 George Fischer (M) Sdn. Bhd. 11 Tampines Street 92, #04-01/07
info.dk.ps@georgfischer.com 40460 Shah Alam, Selangor Darul Ehsan 528 872 Singapore
www.gfps.com/dk Phone +60 (0) 3 5122 5585 Phone +65 6747 0611
Fax +603 5122 5575 Fax +65 6747 0577
Finland my.ps@georgfischer.com sgp.ps@georgfischer.com
Georg Fischer AB www.gfps.com/my www.gfps.com/sg
01510 VANTAA
Phone +358 (0) 9 586 58 25 Mexico / Northern Latin America Spain / Portugal
Fax +358 (0) 9 586 58 29 Georg Fischer S.A. de C.V. Georg Fischer S.A.
info.fi.ps@georgfischer.com Apodaca, Nuevo Leon 28046 Madrid
www.gfps.com/fi CP66636 Mexico Phone +34 (0) 91 781 98 90
Phone +52 (81) 1340 8586 es.ps@georgfischer.com
Fax +52 (81) 1522 8906 www.gfps.com/es
mx.ps@georgfischer.com
www.gfps.com/mx
The technical data are not binding. They neither constitute expressly
warranted characteristics nor guaranteed properties nor a guaranteed durability.
They are subject to modification. Our General Terms of Sale apply.
700.671.345
SCINT_8237_4c (08.14)
© Georg Fischer Piping Systems Ltd
CH-8201 Schaffhausen/Switzerland, 2014
Printed in Switzerland

Gfps 8237 Product Range PVC C en

Uploaded by

Copyright:

Available Formats

Gfps 8237 Product Range PVC C en

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Gfps 8237 Product Range PVC C en

Uploaded by

Copyright:

Available Formats

GF Piping Systems

Piping systems for

Pressure/temperature diagram for PVC-C

P Permissible pressure in bar, psi

Pipe clips metric 29

16 16 163 017 130 0.136 12.4 1,8

20 16 163 017 131 0.217 15.4 2,3

32 16 163 017 133 0.379 2.4 27.2

40 16 163 017 134 0.589 3.0 34.0

110 16 163 017 139 4.270 8.2 93.8

75 10 163 017 187 1.320 3.6 67.8

90 10 163 017 188 1.930 4.3 81.4

20 16 723 000 106 10 0.032 40 27 58

25 16 723 000 107 10 0.055 50 35 71

75 16 723 000 112 5 0.847 150 90 194

Bend 90° short pattern PVC-C metric

225 10 723 010 120 1 7.930 168 256 287

16 16 723 100 105 10 0.015 9 21 23

20 16 723 100 106 10 0.014 11 25 27

63 16 723 100 111 10 0.259 33 76 72

Elbow 45° PVC-C metric

16 16 723 150 105 10 0.008 5 21 19

20 16 723 150 106 10 0.011 5 25 21

63 16 723 150 111 10 0.205 14 76 52

Tee 90° PVC-C metric

16 16 723 200 105 10 0.014 9 21 23

20 16 723 200 106 10 0.020 11 25 27

63 16 723 200 111 10 0.365 34 76 72

20 10 723 250 106 10 0.039 30 6 28 68 46

25 10 723 250 107 10 0.062 36 9 33 83 55

75 6 723 250 112 5 0.857 101 18 91 207 145

Cross PVC-C metric

32 16 723 300 108 10 0.101 17 43 39

63 16 723 300 111 5 0.511 34 79 72

Socket PVC-C metric

16 16 723 910 105 10 0.008 3 22 31

20 16 723 910 106 10 0.010 3 26 35

63 16 723 910 111 10 0.155 3 76 79

20 25 16 723 200 134 10 0.042 14 30 14 33 33

25 32 16 723 200 138 10 0.069 17 36 17 41 39

32 50 16 723 200 164 10 0.199 28 50 28 62 59

* 32 90 16 723 200 142 6 1.436 75 97 46 111 97

Reducing bush short pattern PVC-C metric

* 20 16 16 723 900 334 10 0.004 2 16

* 25 20 16 723 900 337 10 0.004 3 19

* 40 32 16 723 900 346 10 0.017 4 26

63 32 16 723 900 360 10 0.086 16 38

90 50 16 723 900 372 10 0.196 20 51

160 110 16 723 900 390 5 0.956 25 86

20 32 16 723 910 342 10 0.021 30 46

25 40 16 723 910 347 10 0.036 36 55

Cap PVC-C metric

16 16 723 960 105 10 0.008 26 24

20 16 723 960 106 10 0.011 30 25

63 16 723 960 111 5 0.120 80 54

Hose nozzle PVC-C metric

16 16 723 960 405 10 0.009 16 57

20 16 723 960 406 10 0.016 20 73

∕2 20 16 723 100 206 10 0.024 11 14 30 27