Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Chemdur - 42 LP

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

Chemdur – 42 LP

Chemdur – 42 LP
Pourable Epoxy Grout
_______________________________________________________________________________
Product Description Chemdur-42 LP is a solvent-free, 3-component, pourable grout,
based on a combination of high strength epoxy resin and
specially graded filler aggregates.
_______________________________________________________________________________
Uses Chemdur-42 LP is a high strength, shrinkage free, self levelling
epoxy grout suitable for:
-- Bridge bearing plates
-- Machine foundations
-- Mechanical bridge joints
-- Fixing bolts and anchors
-- Reinforcement dowel anchoring
-- Filling cavities in concrete
_______________________________________________________________________________
Advantages Chemdur-42 LP offers the following advantages:
-- Solvent free
-- Excellent flow characteristics even in thin layers
-- Rapid hardening.
-- Suitable for both dry and slightly damp areas.
-- High mechanical strengths
-- Vibration-resistant
_______________________________________________________________________________

Product Data
_______________________________________________________________________________
Type Epoxy resin, hardener and selected quartz filler.
_______________________________________________________________________________
Colour Grey (mixed)
_______________________________________________________________________________
Packaging 10 Kg units (A+ B+ C)
_______________________________________________________________________________
Storage Condition In a dry, shaded area between 5°C and 35°C. Protect from direct
sunlight.
_______________________________________________________________________________
Shelf Life 12 months minimum if stored properly in original, unopened
packaging.
_______________________________________________________________________________
Chemdur – 42 LP

_______________________________________________________________________________
Technical Data
_______________________________________________________________________________
Mixing ratio Comp. A: B: C = 2: 1: 12 (parts by weight)
_______________________________________________________________________________
Mechanical Strengths 7 days 14 days
at 23°C, 50% rH Compressive strength ~ 75-85 N/mm2 ~ 100 N/mm2
Flexural strength ~30-35 N/mm2
Tensile Strength ~15-20 N/mm2
Adhesion (on Concrete) ~ 4 N/mm2
(concrete failure)
Adhesion (on Steel) ~ 15-20 N/mm2
_______________________________________________________________________________
Pot Life 20 °C 30°C 40°C
120 min. 60 min. 40 min.
_______________________________________________________________________________
Density (Mixed) 2.0 Kg/Lit (Approx)
_______________________________________________________________________________
Modulus of elasticity 14,600 N/mm2
_______________________________________________________________________________

Application Details
_______________________________________________________________________________
Substrate Preparation All surfaces must be clean, free standing water and all loosely
adhering particles. Cement laitance must be removed and the
surfaces to be treated must be mechanically roughened. Concrete
must be at least 3-4 weeks old. Metal surfaces (steel and iron)
should be free from rust, oil, grease and any previous surface
coating.
_______________________________________________________________________________
Mixing Mix components A+B together for at least one minute with a
slow speed electric drill (max. 250 R.P.M.).Then add aggregate
(component C) and continue mixing for approx. 3 minutes until a
homogeneous, flowable mixture is achieved.
_______________________________________________________________________________
Application When grouting under bearing plates, ensure sufficient pressure to
maintain movement of the grout. Air must be allowed to
escape. For large volumes, apply in more than one layer,
ensuring that the previous layers have hardened and cooled.
_______________________________________________________________________________
Chemdur – 42 LP

_______________________________________________________________________________
Cleaning Clean all equipment and tools immediately after use. Hardened
material can only be removed mechanically.
_______________________________________________________________________________
Curing Protect the poured grout from direct sunshine for at least 24
hours.
_______________________________________________________________________________
Remarks -- Maximum thickness per horizontal layer: 5-6 cm
-- Minimum substrate temperature: 5°C
-- Maximum substrate temperature 35°-40° C.
-- Base plate and substrate should be shaded from direct
sunlight.
_______________________________________________________________________________

Safety
_______________________________________________________________________________
Precautions Accidental splashes to the skin must be washed off with water
and soap. Accidental splashes to the eyes must be rinsed with
clean warm water. Seek medical attention without delay. Skin
barrier cream, safety goggles and rubber gloves are
recommended.
_______________________________________________________________________________
Ecology Do not dispose off into water or soil in liquid form.
_______________________________________________________________________________
Toxicity Non – toxic.
_______________________________________________________________________________
Transportation Non – hazardous.
_______________________________________________________________________________

You might also like