Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

PowerMacs4000 Atlas Copco 2018

Download as pdf or txt
Download as pdf or txt
You are on page 1of 11

PowerMACS 4000

The winning advantage


in tightening control

1
THE RACE FOR LEAN PRODUCTION IS OVER
Every cycle can be a winning
Total
performance
control
State-of-the-art control and class-leading
functionality; a good way to begin any
fastening cycle, but it’s only the start.
The Atlas Copco PowerMACS 4000
Absolute
represents the pinnacle of automated flexibility
fastening control and a new generation
of upgradeable controller.
Intuitive monitoring and communication
capabilities combined with advanced
management programs allow processes
Easy
to be fine-tuned and productivity hurdles to programming
be overcome.
The PowerMACS 4000 has been developed
with one overriding goal in mind: To get your
production line in the fast lane, and keep it there,
Uncompromised
reliability

2 3
POWERMACS 4000 – THE TOTAL PRODUCTIVITY SOLUTION
Designed for
Outstanding nutrunner speeds error-free setup
New QST-nutrunner: “Intelligent Chip” in QST
Up to 67% faster than spindle provides both
spindle and calibration
QMX nutrunners while
parameters to assure errorfree
delivering the same
setup. Digitalcommunications
superior accuracy and
extended cable length.
durability.

Easy programming Modular plug-and-play


ToolsTalk PowerMACS System requires no cabinet
allows easy programming and therefore less space.
of advanced, flexible Standardized components
tightening strategies increase lifetime and
via simple and intuitive reduce maintenance and
menus. spare parts costs.

DynaTorkTM – Correct Maximize uptime


residual clamp force Heavy duty controller design
and nutrunners that are
Unique torque
certified for accuracy to +/- 2.5 %.
recovery strategy, More than one million cycles
patented by Atlas Copco. between preventive
Delivers optimized maintenance; reduces
fastening through maintenance and down time
improved clamp costs.
loading.

4 5
INTRODUCING THE QST – A SMARTER SPINDLE
The new QST nutrunner is based on the proven success of it’s predecessors.
The improvements result in a speed increase of up to 67%. The tightening controller
Hot Swap – replace
automatically increases the bus voltage for the larger size nutrunner QST80 and 90, without cable or spindle
the need for a different controller or servo, giving unique speed capabilities for high-torque without turning
power off.
applications. A new, quick-coupling Hot Swap cable connector and electronic chip round up Cable connector
is adjustable in
the package of improvements. two directions
New connector for optimal cable
design – cable is management.
fastened in just a
couple of turns.
Electronic chip stores dataincluding
calibration value,serial numbers and
maintenance intervals –reducing
costs and errors.

Delivers an accuracy of +/- 2.5%


after one million cycles creating
longer service intervals.

Digital communication
between nutrunner
and TC – allows spindle
calibration to be
independent of cable
length, reducing the need
for a system calibration.
Inertia braking – allows New QST motor based
nutrunner to run faster on the proven QMX
Available with extended spring travel without overshooting. nutrunner – up to
Simple, easy-to-install sandwich/ 67% improved speed
(76 and 100 mm) and/or extended
pilot mount allows flexible characteristics.
socket holder length. maintenance possibilities.

6 7
Tool key - QST nutrunners CTT and COTT models*
Nutrunners with dual torque transducer feedback. This allows for transducer redundancy, enabling
verification that readings are within certain tolerances.

Torque range Weight Socket


holder
Travel Speed Min Gear size A B C D E
Model mm Nm ft lb r/min C-C kg lb ratio in mm mm mm mm mm Ordering No.*
QST42-20CTT-T50-L134-H10 50 6-20 4-14 2000 43 3.1 6.9 7.50 3/8 134 23 395 15 - 8435 6020 50
QST42-20COTT-T50-L134-H10 50 6-20 4-14 2000 31 4.2 9.3 7.50 3/8 134 - - - 446 8435 6020 60
QST42-50CTT-T50-L134-H13 50 10-50 7-35 700 43 3.8 8.4 21.33 1/2 134 23 422 15 - 8435 6030 50
QST42-50COTT-T50-L134-H13 50 10-50 7-35 700 31 4.5 9.9 21.33 1/2 134 - - - 472 8435 6030 60
QST50-90CTT-T50-L137-H13 50 20-90 15-65 650 51 5.8 12.7 18.21 1/2 137 23 464 15 - 8435 6040 50
QST50-90COTT-T50-L137-H13 50 20-90 15-65 650 37 7.8 17.2 18.21 1/2 137 - - - 521 8435 6040 60
QST50-150CTT-T50-L137-H13 50 30-150 22-110 380 51 5.8 12.8 31.24 1/2 137 23 464 15 - 8435 6050 50
QST50-150COTT-T50-L137-H13 50 30-150 22-110 380 37 7.8 17.2 31.24 1/2 137 - - - 521 8435 6050 60
QST62-150CTT-T50-L152-H13 50 30-150 22-110 450 63 10.2 22.5 13.94 1/2 152 25 542 15 - 8435 6060 50
QST62-150COTT-T50-L152-H13 50 30-150 22-110 450 45 12.8 28.2 13.94 1/2 137 - - - 521 8435 6060 60
QST62-230CTT-T50-L152-H19 50 40-230 29-170 330 63 10.2 22.5 19.04 3/4 152 25 542 15 - 8435 6065 50
QST62-230COTT-T50-L152-H19 50 40-220 29-162 330 45 12.8 28.2 19.04 3/4 152.5 - - - 586 8435 6065 60
QST62-350CTT-T50-L152-H19 50 50-350 37-258 220 63 10.2 22.5 28.33 3/4 152 25 542 15 - 8435 6070 50
QST62-350COTT-T50-L152-H19 50 50-330 37-243 220 45 12.8 28.2 28.33 3/4 152 - - - 592 8435 6070 60
QST80-450CTT-T50-L146-H19 50 90-450 66-332 260 81 16.7 37 22.67 3/4 146 30 595 20 - 8435 6075 50
QST80-450COTT-T50-L146-H19 50 90-450 66-332 260 55 21 46 22.67 3/4 146 - - - 685 8435 6075 60
QST80-600CTT-T50-L146-H19 50 120-600 88-442 200 81 17 37 29.56 3/4 146 30 595 20 - 8435 6080 50
QST80-600COTT-T50-L146-H19 50 120-600 88-442 200 55 21 46 29.56 3/4 146 - - - 685 8435 6080 60
QST90-750CTT-T50-L152-H25 50 150-750 111-553 150 91 25 55 38.89 1 146 30 595 20 - 8435 6085 50
QST90-750COTT-T50-L152-H25 50 150-750 111-553 150 63 29 64 38.89 1 103 - - - 706 8435 6085 60
QST90-1000CTT-T50-L152-H25 50 200-1000 147-737 130 91 26 57 46.84 1 152 32 600 20 - 8435 6090 50
QST90-1000COTT-T50-L152-H25 50 200-1000 147-737 130 63 30 66 46.84 1 153 - - - 710 8435 6090 60

CT and COT models*


CATT models*
Torque range Weight Socket
Nutrunners with dual angle and torque transducer feedback. This allows for angle and torque verification to
holder
Travel Speed Min Gear size A B C D E double-check system accuracy.
Model mm Nm ft lb r/min C-C kg lb ratio in mm mm mm mm mm Ordering No.*
QST34-8CT-T50-L150-H6 50 2-8 1.5-6 3000 34 2 4.4 7.43 1/4 150 16 359 10 - 8435 6000 10 Torque range Weight Socket
QST34-20CT-T50-L150-H10 50 4-20 2.9-14.7 1000 34 2 4.4 21.20 3/8 150 16 359 10 - 8435 6010 10 holder
QST42-20CT-T50-L134-H10 50 6-20 4-14 2000 43 3.1 6.9 7.50 3/8 134 23 395 15 - 8435 6020 10 Travel Speed Min Gear size A B C D E
QST42-20COT-T50-L134-H10 50 6-20 4-14 2000 31 4.2 9.3 7.50 3/8 134.5 - - - 446 8435 6020 20 Model mm Nm ft lb r/min C-C kg lb ratio in mm mm mm mm mm Ordering No.*
QST42-50CT-T50-L134-H13 50 10-50 7-35 700 43 3.8 8.4 21.33 1/2 134 23 422 15 - 8435 6030 10 QST42-20CTTA-T50-L134-H10 50 6-20 4-14 2000 43 3.1 6.9 7,50 3/8 134 23 395 15 - 8435 6020 70
QST42-50COT-T50-L134-H13 50 10-50 7-35 700 31 4.5 9.9 21.33 1/2 134.5 - - - 472 8435 6030 20 QST42-50CTTA-T50-L134-H13 50 10-50 7-35 700 43 3.8 8.4 21,33 1/2 134 23 422 15 - 8435 6030 70
QST50-90CT-T50-L137-H13 50 20-90 15-65 650 51 5.8 12.7 18.21 1/2 137 23 464 15 - 8435 6040 10 QST50-90CTTA-T50-L137-H13 50 20-90 15-65 650 51 5.8 12.7 18,21 1/2 137 23 464 15 - 8435 6040 70
QST50-90COT-T50-L137-H13 50 20-90 15-65 650 37 7.8 17.2 18.21 1/2 137 - - - 521 8435 6040 20 QST50-150CTTA-T50-L137-H13 50 30-150 22-110 380 51 5.8 12.8 31,24 1/2 137 23 464 15 - 8435 6050 70
QST50-150CT-T50-L137-H13 50 30-150 22-110 380 51 5.8 12.8 31.24 1/2 137 23 464 15 - 8435 6050 10 QST62-150CTTA-T50-L152-H13 50 30-150 22-110 450 63 10.2 22.5 13,94 1/2 152 25 542 15 - 8435 6060 70
QST50-150COT-T50-L137-H13 50 30-150 22-110 380 37 7.8 17.2 31.24 1/2 137 - - - 521 8435 6050 20 QST62-230CTTA-T50-L152-H19 50 40-230 29-170 330 63 10.2 22.5 19,04 3/4 152 25 542 15 - 8435 6065 70
QST62-150CT-T50-L152-H13 50 30-150 22-110 450 63 10.2 22.5 13.94 1/2 152 25 517 15 - 8435 6060 10 QST62-350CTTA-T50-L152-H19 50 50-350 37-258 220 63 10.2 22.5 28,33 3/4 152 25 542 15 - 8435 6070 70
QST62-150COT-T50-L152-H13 50 30-150 22-110 450 45 12.8 28.2 13.94 1/2 152.5 - - - 586 8435 6060 20 QST80-450CTTA-T50-L146-H19 50 90-450 66-332 260 81 16.7 36.9 22,67 3/4 146 30 595 20 - 8435 6075 70
QST62-230CT-T50-L152-H19 50 40-230 29-170 330 63 10.2 22.5 19.04 3/4 152 25 517 15 - 8435 6065 10 QST80-600CTTA-T50-L146-H19 50 120-600 88-442 200 81 17 37 29,56 3/4 146 30 595 20 - 8435 6080 70
QST62-230COT-T50-L152-H19 50 40-220 29-162 330 45 12.8 28.2 19.04 3/4 152.5 - - - 586 8435 6065 20 QST90-750CTTA-T50-L152-H25 50 150-750 111-553 150 91 25 55 38,89 1 152 32 600 20 - 8435 6085 70
QST62-350CT-T50-L152-H19 50 50-350 37-258 220 63 10.2 22.5 28.33 3/4 152 25 517 15 - 8435 6070 10 QST90-1000CTTA-T50-L152-H25 50 200-1000 147-737 130 91 26 57 46,84 1 152 32 600 20 - 8435 6090 70
QST62-350COT-T50-L152-H19 50 50-330 37-243 220 45 12.8 28.2 28.33 3/4 152 - - - 592 8435 6070 20
QST80-450CT-T50-L146-H19 50 90-450 66-332 260 81 16.7 37 22.67 3/4 146 30 595 20 - 8435 6075 10
QST80-450COT-T50-L146-H19 50 90-450 66-332 260 55 21 46 22.67 3/4 146 - - - 685 8435 6075 20
QST80-600CT-T50-L146-H19 50 120-600 88-442 200 81 17 37 29.56 3/4 146 30 595 20 - 8435 6080 10
QST80-600COT-T50-L146-H19 50 120-600 88-442 200 55 21 46 29.56 3/4 146 - - - 685 8435 6080 20 CTV models*
QST90-750CT-T50-L152-H25 50 150-750 111-553 150 91 25 55 38.89 1 152 32 600 20 - 8435 6085 10
QST90-750COT-T50-L152-H25 50 150-750 111-553 150 63 29 64 38.89 1 153 - - - 705 8435 6085 20 Nutrunners equipped with angle heads with or without spring travel.
QST90-1000CT-T50-L152-H25 50 200-1000 147-737 130 91 26 57 46.84 1 152 32 600 20 - 8435 6090 10
QST90-1000COT-T50-L152-H25 50 200-1000 147-737 130 63 30 66 46.84 1 153 - - - 710 8435 6090 20
Torque range Weight Socket
QST95-1750CT-T50-L149-H38 50 350-1750 258-1291 60 96 28 61.7 98.21 1 1/2 149 32 651 20 - 8435 6095 10
holder
QST95-1750COT-T50-L155-H38 50 350-1750 258-1291 60 73 43 94.8 98.21 1 1/2 155 - - - 796 8435 6095 20
Travel Speed Min Gear size A B C D E
Extended spring travel 76 mm and 100 mm
Model mm Nm ft lb r/min C-C kg lb ratio in mm mm mm mm mm Ordering No.*
QST42-20CT-T76-L189-H10 76 6-20 4-14 2000 43 3.1 6.9 7.50 3/8 189 23 421 15 - 8435 6020 11
QST42-50CT-T76-L189-H13 76 10-50 7-35 700 43 3.8 8.4 21.30 1/2 189 23 447 15 - 8435 6030 11 QST42-20CTV-P10 - 6-20 4-14 1200 28 3.5 7 11,60 3/8 65 - - 8 409 9831 4077 27
QST50-90CT-T76-L200-H13 76 20-90 15-65 650 51 5.8 12.7 18.20 1/2 200 25 493 15 - 8435 6040 11 QST42-20CTV-T25-H10 25 6-20 4-14 1200 28 5 11 11,60 3/8 - - - - - 9831 4077 57
QST50-150CT-T76-L200-H13 76 30-150 22-110 380 51 5.8 12.8 31.20 1/2 200 25 493 15 - 8435 6050 11 QST42-30CTV-P10 - 6-30 4.5-22 440 36 3.5 7 11,60 3/8 83 - - 8 435 9831 4077 26
QST42-30CTV-T25-H10 25 6-30 4.5-22 440 36 5.5 12 33,00 3/8 - - - - 525 9831 4077 58
QST62-230CT-T76-L200-H19 76 40-230 29-170 330 63 10.2 22.5 19.00 3/4 200 25 543 15 - 8435 6065 11
QST42-70CTV-P13 - 14-70 10-52 440 40 4.5 10 33,00 1/2 84 - - 15 432 9831 4077 28
QST62-350CT-T76-L200-H19 76 50-350 37-258 220 63 10.2 22.5 28.30 3/4 200 25 543 15 - 8435 6070 11
QST42-70CTV-T25-H13 25 14-70 10-52 440 40 5.5 12 33,00 1/2 - - - - 526 9831 4077 59
QST80-450CT-T76-L214-H19 50 90-450 66-332 260 81 17 37 22.67 3/4 214 43 595 20 - 8435 6075 11
QST50-170CTV-P13 - 34-170 25-125 210 51 6.8 15 56,20 1/2 135 - - 15 481 9831 4078 38
QST80-600CT-T76-L214-H19 76 120-600 88-442 200 81 17 37 29.60 3/4 214 43 595 20 - 8435 6080 11
QST50-170CTV-T50-H13 50 34-170 25-125 210 48 8.6 19 56,20 1/2 - - - - - 9831 4078 44
QST90-750CT-T76-L176-H25 50 150-750 111-553 150 63 29 64 38.89 1 153 - - - 705 8435 6085 11
QST50-200CTV-H19 - 40-200 29-145 210 51 7 15 56,20 3/4 135 - - 15 481 9831 4078 43
QST90-1000CT-T76-L176-H25 76 200-1000 147-737 130 91 26 57 46.80 1 176 32 650 20 - 8435 6090 11
QST50-200CTV-T25-H19 25 40-200 29-145 210 51 9.5 21 56,20 3/4 135 - - 15 481 9831 4078 46
QST42-50CT-T100-L191-H13 100 10-50 7-35 700 43 3.8 8.4 21.30 1/2 191 23 519 15 - 8435 6030 12
QST50-200CTV-T50-H19 50 40-200 29-145 210 51 10 22 56,20 3/4 135 - - 15 481 9831 4078 47
QST50-150CT-T100-L186-H13 100 30-150 22-110 380 51 5.8 12.8 31.20 1/2 186 23 563 15 - 8435 6050 12
QST62-350CTV-H19 - 70-350 52-258 120 66 13.5 30 51,00 3/4 153 - - 15 563 9831 4079 73
QST62-350CTV-T25-H19 25 70-350 52-258 120 66 16.5 33 51,00 3/4 187 - - 14 - 9831 4087 10
QST62-600CTV-H25 - 120-600 88-440 100 109 16.5 33 93,50 1 174 - - 14 564 9831 4087 02

8 9
Primary and secondary controller
GEARED FOR LEAN The tool key to the right

PRODUCTIVITY
explains the significance
of the letters/numbers
forming the name of the
tool model.

Lean production requires decisions based on facts and the basis for all improvements
is the ability to monitor the result of changes. PowerMACS 4000 has effective tools
to work with statistical process control to ensure that quality issues are identified
long before they cause production problems. Connect your complete line to the
Atlas Copco ToolsNet software portfolio to maximize the uptime of your production line.

Indictor lamps Ethernet switch PowerMACS 4000 Controllers


• 6 ports
• ALL OK Model Fieldbus version Ordering No.
• OK, NOK Internal Redundant Primary controller
E-stop relays TC-4000-P-ES No Fieldbus 8435 6511 00
• ALARM TC-4000-P-PB-ES Profibus 8435 6511 10
• Class 3
• E-stop TC-4000-P-DN-ES DeviceNet 8435 6511 30
TC-4000-P-EIP-ES Ethernet IP 8435 6511 60
Digital in/output, TC-4000-P-MTCP-ES ModBus TCP 8435 6511 70
Text display optoisolated TC-4000-P-PN-ES Profi Net 8435 6511 50
(TC-4000-P only) TC-4000-P-CC-ES CC link 8435 6511 80
• TC node address Primary Secondary controller
• 4 inputs, 4 outputs No fieldbus, No Ethernet switch 8435 6500 00
• IP-address Controller (TC-P) TC-4000-S
TC-4000-S-ES No fieldbus, Ethernet switch 8435 6501 00
24V for external use
• Error messages
(TC-4000-P only)
• Software version
• Cycle data Anybus slot Back plates
(TC-4000-P only)
Push buttons • Fileldbus card interface
Back plates
• Toogle between Double ethernet ports
displayed information (TC-4000-P only) Model Ordering No.

• Only 1 factory IP-address Secondary


• Set IP-address Back plate with 6 port Ethernet switch 4222 0982 90
• Internal Ethernet Controller (TC-S)
connected to switch Back plate no Ethernet switch 4222 0982 91
Reset E-stop button
(TC-4000-P only) TC communication LAN 6 port Ethernet switch 4222 0984 90

• Separated from factory


One model provides WAN.
the entire torque range
Eliminates multicasting. Model Ordering No.
MSB
Main switch box (Max 6 channels) 8435 5660 00
DB
Distribution box (Max 6 channels) + Power cable 1800 mm 8435 6560 50
GB
General box 4222 1249 85

Main switch box (MSB)


Advanced networking, Reject Management Powerful, flexible
and distribution box (DB)
powerful communication tightening strategies
With the PowerMACS 4000 you can easily
The MSB and DB are used for power distribution and
define your tightening strategy based PowerMACS 4000 library has a wealth
PowerMACS 4000 supports a zero- fault makes power management easy. They are designed
production philosophy with its capacity on results to make sure valuable time of tested tightening strategies so now for 400-480 VAC 3 ph and leave room for customer
to collect tightening data for analysis, and resources are not wasted. Reject every joint can be tightened in the best adaptations. The E-stop functionality can be upgraded
continuous improvement and traceability. Management on-board can easily be set possible way in terms of cycle time and from class 3 to class 4. Each MSB or DB supplies up to 6
PowerMACS processing power and to fullfil your requirements to handle quality.DynaTorkTM is Atlas Copco’s
controllers with power.
memory are designed to handle and send faulty tightening in the most efficient way, unique tightening strategy that provides
large amount of data without influencing regardless of whether a basic or advanced optimized fastening of joints that present
the tightening process. strategy is used. Main Switch Box (MSB) Distrubution Box (DB)
relaxation challenges.

10 11
Tool and extension cable Easy-to-build system

New, slimmer 12 mm cable Power cables 4222 1248 xx


offers increased durability Digital communication
E-Stop cable 4222 1247 xx
and flexibility. channel allows longer cable
lengths. Ethernet cable 4222 1246 xx Fieldbus Incoming E-stop Factory network (1 IP)

Motor cable 4220 3799 xx

Compatible cables – Use same


cable for extensions and double
torque/angle transducer QST. Power input

Single cable solution – Power


and communication bus
cables are combined.
Alignment markers
Position marking on cable and connector MSB TC QST

Alignment markers on the cable connector and spindle connector guide With the PowerMACS 4000 controller, multiple-spindle systems are easy to configure. Simply refer to the system ordering table
to see which components you need.
youto a quick and easy cable installation in those hard to reach locations.

TOOL AND EXTENSION CABLES SYSTEM ORDERING TABLE FOR A SYSTEM WITH ONE STATION
Length Ordering No. Number of System Number of System
No. of tool cable No. of tool cable
2m 4220 3799 02 spindles TC-P TC-S MSB DB cables kita
spindles TC-P TC-S MSB DB cables kita
3m 4220 3799 03
5m 4220 3799 05 1 1 0 1 0 1 1 10 1 9 1 1 10 1
7m 4220 3799 07 2 1 1 1 0 2 1 11 1 10 1 1 11 1
10 m 4220 3799 10 3 1 2 1 0 3 1 12 1 11 1 1 12 1
15 m 4220 3799 15 4 1 3 1 0 4 1 13 1 12 1 2 13 1
20 m 4220 3799 20 5 1 4 1 0 5 1 14 1 13 1 2 14 1
ETHERNET CABLES
25 m 4220 3799 25 6 1 5 1 0 6 1 15 1 14 1 2 15 1
30 m 4220 3799 30 Length Ordering No. 7 1 6 1 1 7 1 16 1 15 1 2 16 1
35 m 4220 3799 35 0.5 m 4222 1246 00 8 1 7 1 1 8 1 17 1 16 1 2 17 1
40 m 4220 3799 40 1 m 4222 1246 01 9 1 8 1 1 9 1 18 1 17 1 2 18 1
2 m 4222 1246 02 a
See system cable kits below.
3 m 4222 1246 03
5 m 4222 1246 05 SYSTEM CABLE KIT
POWER CABLES BETWEEN MSB AND TC 10 m 4222 1246 10
Suitable for Length Ordering No. 15 m 4222 1246 15
Power cable Ethernet cable E-stop cable Ethernet
TC1-TC2, TC7-TC8, TC13-TC14 1350 mm 4222 1248 13 switch incl.
TC3-TC4, TC9-TC10, TC15-TC16 1650 mm 4222 1248 16 E-STOP CABLES AND TERMINATION No. of 1350 mm 1650 mm 1950 mm 1m 2m 3m 1200 mm 3000 mm Backplate
TC5-TC6, TC11-TC12, TC17-TC18 1950 mm 4222 1248 19 spindles 4222 1248 13 4222 1248 16 4222 1248 19 4222 1246 01 4222 1246 02 4222 1246 03 4222 1247 12 4222 1247 30 4222 0982 90 Ordering No.b
Components Length Ordering No.
For longer distances 5m 4222 1248 50 1 1 - - - - - - - - 8435 6560 01
10 m 4222 1370 10 E-stop cable 1200 mm 4222 1247 12
E-stop cable 3000 mm 4222 1247 30 2 2 - - 1 - - 1 - - 8435 6560 02
15 m 4222 1370 15
E-stop termination 4222 0755 00 3 2 1 - 1 1 - 1 1 - 8435 6560 03
20 m 4222 1370 20
4 2 2 - 1 2 - 2 1 - 8435 6560 04
5 2 2 1 1 3 - 3 1 - 8435 6560 05
6 2 2 2 4 1 - 4 1 1 8435 6560 06
7 4 3 - 5 1 - 5 1 1 8435 6560 07
8 4 4 - 6 1 - 6 1 1 8435 6560 08
9 4 3 2 4 1 3 7 1 1 8435 6560 09
10 4 4 2 5 1 3 8 1 2 8435 6560 10
11 4 4 3 6 1 3 9 1 2 8435 6560 11
12 4 4 4 7 1 3 10 1 2 8435 6560 12
13 5 4 4 7 1 4 10 2 2 8435 6560 13
14 6 4 4 8 1 4 11 2 3 8435 6560 14
15 6 5 4 9 1 4 12 2 3 8435 6560 15
16 6 6 4 10 1 4 13 2 3 8435 6560 16
17 6 6 5 10 2 4 14 2 3 8435 6560 17
18 6 6 6 11 2 4 15 2 4 8435 6560 18
b
Based on Atlas Copco suggested set-up.

Cable between MSB Ethernet cable E-stop component


or DB and TC Every TC-P comes with
an e-stop termination.
12 13
Software ToolsTalk PowerMACS World Release 10
STANDARDIZED
MODULAR SOLUTIONS
Choose Basic or Advanced MiniDisplay 2 Stacklight Indicator box
mode – view only the Designation Ordering No.
8433 0570 13 8435 3010 03
functions you need. Quick-set variable – trim 1 user English 8092 1308 01
5 user English 8092 1308 05
your process in seconds. 10 user English 8092 1308 10
Plant license English 8092 1308 97
1 user German 8092 1308 11
5 user German 8092 1308 15
10 user German 8092 1308 20
Plant license German 8092 1308 98
1 user French 8092 1308 21
5 user French 8092 1308 25
10 user French 8092 1308 30
Plant license French 8092 1308 99

Drag and drop interface


– save time with intuitive Touch-screen interface for Stacklight – gives Indicator box – direct
user interface. program selection. Configure continuous station feedback operator feedback on
input and view cycle data and on the tightening process. the tightening process.
traces.

HLTQ I/O expander Operator panel


HLT15Q 8434 2300 00 8433 0564 45 8433 0565 00 (advanced)
HLT15Q WiFi 8434 2300 10 8433 0565 10 (basic)
HLT19Q 8434 2300 20
HLT19Q WiFi 8434 2300 30

Can act as station PC to run Provides an additional With command buttons and integrated
ToolTalk PowerMACS. eight digital inputs and lamp for operator feedback. Allows
outputs. the manual selection of program via
selector switch.

Ethernet Ethernet
switch portwitch
cable Accessory cables Ordering No.
I/O bus cable 0.5 m 4222 0917 00
1m 4222 0917 01
M12 Extension cable 3m 4222 0917 03
for 24V supply 5m 4222 0917 05
10 m 4222 0917 10
15 m 4222 0917 15
I/O Termination plug 4222 0443 00

Indicator box cable


for PowerMacs 4000 Ordering No.
Indicator box 8435 3010 04
Indicator box cable to PM4K, 1 m 4243 0278 80
I/O bus I/O bus cable and Open end cable 5 m 4243 0281 05
cable extension cable Extension cable
3 m 4243 0282 03
5 m 4243 0282 05
10 m 4243 0282 10
15 m 4243 0282 15
20 m 4243 0282 20
All above accessories and I/O bus cables are 25 m 4243 0282 25
the same as for Power Focus.

14 15
PROVEN, PRODUCTION-LINE SERVICE
PERFORMANCE ToolScan RCM warranty i.e. covers as well all unplanned
repairs providing the equipment has not
RCM (Reliability Centered Maintenance) been misused. No nasty surprises of costly
is a widely used process to optimize your
ZF AG, Germany overall service. Together we analyse your
repairs throughout the contracted period.

existing service program and how it can Preventive Maintenance Agreement


ZF AG is a world leader in driveline and chassis technology. be optimize based on each application
Their customers include the world’s leading automotive The Preventive Maintenance Service is
together with your operating cost for a
manufacturers. They have always used the most modern, our standard recommended maintenance
failed spindle in your production. A wrong
productive equipment in their production processes; a fact that program Maintenance work is carried out
working spindle in the production can have
makes the results of their experience with the new PowerMACS either on your premises or in our central are
costly impacts all the way to he end-user.
4000, all the more impressive. of all planning and data storage during the
Full Coverage Agreement agreement.
The Power MACS controller eliminates the need of a torque
Our Full Coverage Service is exactly hat Calibration Services
wrench check, reducing cycle times by up to 50% Thomas Weissenrieder,
it states, acomplete tailored aintenance
On the assembly line, you need to be
The result? An annual saving of several thousand Euro Process Engineer, solution with a fixedannual cost. It onsists
cer - tain about the performance of your
– from just one component assembly process. ZF Friedrichshafen: of different standard servicemodules
spindles and equipment. The spindles have
that secure the needs and availability of
“The assembly of this to be calibrated at regular intervals. These
component is now faster your equipment. The service is available
services keep your spindles and torque
and safer than before. The in combi nation with newly purchased
measu-rement equipment calibrated for
PowerMACS 4000 is the equipment as well as for your existing
optimum performance. Atlas Copco offers
first system to fulfill the spindles after a review check. It provides
quality demands.” a complete range of calibration services for
much more cove rage than the standard
all your spindles and equipment. Most Atlas
Guiseppe de Giacomo, operator, ZF: “Super! Much easier to operate than before, Copco Service Centers are today ISO 9000
I cannot make any errors with this system!”
Certified or accredited.
Training

We offer an established program of training


courses and workshops to guarantee
optimized use of your equipment. These
training can be held either on your own
premises or in our Training Centre.
ToolStart

We offer tool installation and start-up


by qualified Atlas Copco engineers at a
fixed price. The service also includes:
programming, test running and operator
training.F

For more information about above


services, please contact your Atlas Copco
representative.

16 17
QST – CT, CTT & CATT nutrunner QST – COT & COTT nutrunner Main switch box
A E
A B C

QST - CTV nutrunner

Distribution box

PowerMACS 4000 Primary TC

PowerMACS 4000 Secondary TC

18 19
9833 1757 01 – 2017:1

Committed to Sustainable Productivity


www.atlascopco.com

20

You might also like