Recordall® Turbo Series Meters

Models 160 (1-1/2 in.), 200 (2 in.), 450 (3 in.), 1000 (4 in.),
2000 (6 in.), 3500 (8 in.), 5500 (10 in.), 6200 (12 in.)

Models without Integral Strainers, Sizes 1-1/2…12 in.

Models with Integral Strainers, Sizes 1-1/2…4 in.

RTS-PS-00024-EN-07 (August 2017) Parts List

Recordall® Turbo Series Meters

Sizes 1-1/2 in., 2 in., 3 in. and 4 in.

1b 21 20
23
1c
6 1a

8 5
24 22

2 2

3b
3a 25a

7 4

25b

11
12

9 10 13
26a

14

26b
18
16a
15
17
16a

27

NOTE:
Service Element Assembly (item 15) 16b
components are outlined in red.
Numbered components are also available
for individual purchase. 19

28
29

30, 31

Page 2 RTS-PS-00024-EN-07 August 2017

 Parts List

Part Numbers for Sizes 1-1/2 in., 2 in., 3 in. and 4 in.
Item Description
1-1/2 in. 2 in. 3 in. 4 in.
1a Register flat lid (plastic) 62278-001 62278-001 62278-001 62278-001
1b Register flat lid (bronze) 62353-001 62353-001 62353-001 62353-001
1c Register flat lid and shroud (bronze) 62616-001 62616-001 62616-001 62616-001
Register, 100 gallon T. C. 64085-001 64085-002 64085-003 64085-004
Register, 100 gallon T. C. (Reclaimed) 64085-031 64085-032 64085-033 64085-034
Register, 10 cubic ft T.C. 64085-005 64085-006 64085-007 64085-008
Register, 10 cubic ft T.C. (Reclaimed) 64085-035 64085-036 64085-037 64085-038
2
Register, 1 cubic meter T. C. 64085-009 64085-010 64085-011 64085-012
Register, 1000 gallon T.C. — — — —
Register, 100 cubic ft T.C. — — — —
Register, 10 cubic meter T.C. — — — —
Tamper-resistant screw, standard (for local register, ADE®, RTR®) 62335-001 62335-001 62335-001 62335-001
3a
Tamper-resistant screw, standard (for HR-E® LCD encoder, not shown) 62624-001 62624-001 62624-001 62624-001
Tamper-resistant TORX® seal screw (for local register, ADE, RTR) 62516-001 62516-001 62516-001 62516-001
3b
Tamper-resistant TORX seal screw (for HR-E LCD encoder, not shown) 62516-002 62516-002 62516-002 62516-002
Tamper-resistant keyed seal screw, standard (for local register, ADE, RTR) 66925-001 66925-001 66925-001 66925-001
3c
Tamper-resistant keyed seal screw, short (for HR-E LCD encoder, not shown) 66925-003 66925-003 66925-003 66925-003
4 Plastic shroud (bottom half ) 62279-001 62279-001 62279-001 62279-001
5 Plastic shroud (top half ) 62280-001 62280-001 62280-001 62280-001
6 Bronze shroud (for flat lid) 62442-001 62442-001 62442-001 62442-001
7 Plastic insert for flat lid bronze shroud 62455-001 62455-001 62455-001 62455-001
8 Flat lid hinge pin 59568-003 59568-003 59568-003 59568-003
Head assembly (LL), complete 63010-024 63010-025 63010-026 63010-027
9
Head assembly (LL), complete (for models with integral strainer) 63010-025 63010-025 63010-026 63010-027
10 O-Ring, calibration shaft 62754-001 62754-001 62754-001 62754-001
11 Seal plug, calibration shaft 62793-001 62793-001 62793-001 62793-001
12 Lock screw, calibration shaft 68291-001 68291-001 68291-001 68291-001
13 Calibration shaft 68288-001 68288-001 68288-001 68288-001
14 Cover plate (LL) 66131-002 66131-002 66132-002 66132-002
Service element assembly 62755-038 62755-042 62755-039 62755-043
15
Service element assembly (for models with integral strainer) 62755-042 62755-042 62755-039 62755-043
16a Cage / nose cone setscrews (2 required) 62976-007 62976-007 62976-007 62976-007
16b Cage setscrew (1 required) 62976-005 62976-005 62976-005 62976-005
17 Magnet carrier with top ball 62976-018 62976-018 62976-019 62976-019
18 O-Ring, head 62754-002 62754-002 62754-003 62754-003
19 Cage seal 62924-001 62924-001 62924-002 62924-002
20 Strainer cover (LL) (for models with integral strainer) 62635-005 63233-003 63281-003 63281-003
21 Cover Bolt (for models with integral strainer) 55031-033 55031-060 55031-062 55031-062
22 Screen (for models with integral strainer) 63115-001 63277-001 63283-001 63285-001
23 Gasket (for models with integral strainer) 11071-033 22650-050 22650-051 22650-051
24 Washer for strainer cover (for models with integral strainer) — 55262-015 55262-015 55262-015
25a Head bolt, w/seal hole (1 required) 25421-043 25421-043 25421-034 25421-034
25b Head bolt, w/o seal hole (3 required) 55031-060 55031-060 55031-116 55031-116
26a TORX seal screw driver and bit (long) 62658-003 62658-003 62658-003 62658-003
26b TORX seal screw driver and bit (stubby) 62658-001 62658-001 62658-001 62658-001
27 Register test ring 62446-001 62446-001 62446-001 62446-001
28 Plastic shroud disassembly tool 62346-001 62346-001 62346-001 62346-001
29 Test plug (LL) 33879-016 33879-014 33879-012 33879-012
Housing, round flange (LL), w/o test plug — 62748-007 62764-006 62765-006
30 Housing, round flange (LL), w/ test plug — 62748-006 62764-007 62765-005
Housing, round flange (LL), w/ test plug (for models with integral strainer) — 63220-003 63127-005 63128-007
Housing, elliptical flnage (LL) w/o test plug 62747-006 62749-006 — —
31 Housing, elliptical flnage (LL) w/ test plug 62747-005 62749-005 — —
Housing, elliptical flnage (LL) w/ test plug (for models with integral strainer) 63125-005 63126-005 — —
— TORX seal screw driver bit (not shown) 62657-001 62657-001 62657-001 62657-001
— Driver bit, keyed seal screw (not shown) 66925-002 66925-002 66925-002 66925-002
— Bit driver, stubby, without bit (not shown) 62658-005 62658-005 62658-005 62658-005
— Bit driver, standard, without bit (not shown) 62658-006 62658-006 62658-006 62658-006

August 2017 RTS-PS-00024-EN-07 Page 3

Recordall® Turbo Series Meters

Sizes 6 in., 8 in., 10 in. and 12 in.

1b

1c
6 1a

8 5

2 2

3b
3a

7 4

11 12
10 15
14
9 13
16
17

19
18
20a 20a
21

24a

24b 29
22
NOTE: 20b
Service Element Assembly (item 18) 23
components are outlined in red.
Numbered components are also available
for individual purchase.

25

27

26
28

Page 4 RTS-PS-00024-EN-07 August 2017

 Parts List

Part Numbers Part Numbers for Sizes 6 in., 8 in., 10 in. and 12 in.
Item Description
6 in. 8 in. 10 in. 12 in.
1a Register flat lid (plastic) 62278-001 62278-001 62278-001 62278-001
1b Register flat lid (bronze) 62353-001 62353-001 62353-001 62353-001
1c Register flat lid and shroud (bronze) 62616-001 62616-001 62616-001 62616-001
Register, 10,000 gallon T. C. — — — 64085-043
Register, 10,000 gallon T. C. (reclaimed) — — — 64085-047
Register, 1000 cubic ft T.C. — — — 64085-044
Register, 1000 cubic ft T.C. (reclaimed) — — — 64085-048
Register, 1 cubic meter T. C. — — — —
2
Register, 1000 gallon T.C. 64085-017 64085-018 64085-019 —
Register, 1000 gallon T.C. (reclaimed) 64085-039 64085-041 64085-049 —
Register, 100 cubic ft T.C. 64085-020 64085-021 64085-022 —
Register, 100 cubic ft T.C. (reclaimed) 64085-040 64085-042 64085-050 —
Register, 10 cubic meter T.C. 64085-023 64085-024 64085-025 64085-045
Tamper-resistant screw, standard (for local register, ADE, RTR) 62335-001 62335-001 62335-001 62335-001
3a
Tamper-resistant screw, standard (for HR-E LCD encoder, not shown) 62624-001 62624-001 62624-001 62624-001
Tamper-resistant TORX seal screw (for local register, ADE, RTR) 62516-001 62516-001 62516-001 62516-001
3b
Tamper-resistant TORX seal screw (for HR-E LCD encoder, not shown) 62516-002 62516-002 62516-002 62516-002
Tamper-resistant keyed seal screw, standard (for local register, ADE, RTR) 66925-001 66925-001 66925-001 66925-001
3c
Tamper-resistant keyed seal screw, short (for HR-E LCD encoder, not shown) 66925-003 66925-003 66925-003 66925-003
4 Plastic shroud (bottom half ) 62279-001 62279-001 62279-001 62279-001
5 Plastic shroud (top half ) 62280-001 62280-001 62280-001 62280-001
6 Bronze shroud (for flat lid) 62442-001 62442-001 62442-001 62442-001
7 Plastic insert for flat lid bronze shroud 62455-001 62455-001 62455-001 62455-001
8 Flat lid hinge pin 59568-003 59568-003 59568-003 59568-003
9 Head assembly (LL), complete 63010-028 63010-029 63010-030 63010-048
10 Eyebolts 59215-039 59215-067 59215-067 59215-067
11 Lock screw, calibration shaft 68291-001 68291-001 68291-001 68291-001
12 Seal plug, calibration shaft 62793-001 62793-001 62793-001 62793-001
13 O-Ring, calibration shaft 62754-001 62754-001 62754-001 62754-001
14 Calibration shaft 68289-001 68290-001 68290-001 68290-001
Head bolt, w/seal hole (6 in., 1 required; 8…12 in., 2 required) 25421-044 58088-004 58088-004 58088-004
15
Head bolt, w/o seal hole (6 in., 7 required; 8…12 in., 8 required) 55031-117 55031-172 55031-172 55031-172
16 Calibration gear 62976-031 62976-031 62976-031 62976-031
17 Cover plate (LL) 66133-002 66134-002 66134-002 66134-002
18 Service Element Assembly 62755-040 62755-041 62755-044 62755-044
19 O-Ring, head 62754-004 62754-005 62754-005 62754-005
20a Cage / nose cone setscrews (2 required) 62976-050 62976-050 62976-050 62976-050
20b Cage setscrew (4 required) 63177-011 62976-044 62976-044 62976-044
21 Magnet carrier (with top ball) 63177-015 62976-047 62976-047 62976-047
22 Screw — 62976-007 62976-007 62976-007
23 Cage seal 62924-003 62924-004 — —
24a TORX seal screw driver and bit (long) 62658-003 62658-003 62658-003 62658-003
24b TORX seal screw driver and bit (stubby) 62658-001 62658-001 62658-001 62658-001
25 Register test ring 62446-001 62446-001 62446-001 62446-001
26 Plastic shroud disassembly tool 62346-001 62346-001 62346-001 62346-001
27 Test plug (LL) 33879-012 33879-012 — —
Housing, round flange (LL) w/o test plug 62837-006 — 63355-003 —
28 Housing, round flange (LL) w/ test plug 62837-005 63304-004 — —
Housing, round flange (Cast Iron) w/o test plug — — — 67101-017
29 Washer (4 required) 63177-012 62976-049 62976-049 62976-049
— TORX seal screw driver bit (not shown) 62657-001 62657-001 62657-001 62657-001
— Driver bit, keyed seal screw (not shown) 66925-002 66925-002 66925-002 66925-002
— Bit driver, stubby, without bit (not shown) 62658-005 62658-005 62658-005 62658-005
— Bit driver, standard, without bit (not shown) 62658-006 62658-006 62658-006 62658-006

August 2017 RTS-PS-00024-EN-07 Page 5

Recordall® Turbo Series Meters

THIS PAGE INTENTIONALLY BLANK

Page 6 RTS-PS-00024-EN-07 August 2017

 Parts List

THIS PAGE INTENTIONALLY BLANK

August 2017 RTS-PS-00024-EN-07 Page 7

Recordall® Turbo Series Meters

Making Water Visible®

ADE, GALAXY, HR | E, Making Water Visible, ORION, Recordall and RTR are registered trademarks of Badger Meter, Inc. Other trademarks appearing in this document are the property
of their respective entities. Due to continuous research, product improvements and enhancements, Badger Meter reserves the right to change product or system specifications
without notice, except to the extent an outstanding contractual obligation exists. © 2017 Badger Meter, Inc. All rights reserved.

www.badgermeter.com
The Americas | Badger Meter | 4545 West Brown Deer Rd | PO Box 245036 | Milwaukee, WI 53224-9536 | 800-876-3837 | 414-355-0400
México | Badger Meter de las Americas, S.A. de C.V. | Pedro Luis Ogazón N°32 | Esq. Angelina N°24 | Colonia Guadalupe Inn | CP 01050 | México, DF | México | +52-55-5662-0882
Europe, Eastern Europe Branch Office (for Poland, Latvia, Lithuania, Estonia, Ukraine, Belarus) | Badger Meter Europe | ul. Korfantego 6 | 44-193 Knurów | Poland | +48-32-236-8787
Europe, Middle East and Africa | Badger Meter Europa GmbH | Nurtinger Str 76 | 72639 Neuffen | Germany | +49-7025-9208-0
Europe, Middle East Branch Office | Badger Meter Europe | PO Box 341442 | Dubai Silicon Oasis, Head Quarter Building, Wing C, Office #C209 | Dubai / UAE | +971-4-371 2503
Slovakia | Badger Meter Slovakia s.r.o. | Racianska 109/B | 831 02 Bratislava, Slovakia | +421-2-44 63 83 01
Asia Pacific | Badger Meter | 80 Marine Parade Rd | 21-06 Parkway Parade | Singapore 449269 | +65-63464836
China | Badger Meter | 7-1202 | 99 Hangzhong Road | Minhang District | Shanghai | China 201101 | +86-21-5763 5412
Switzerland | Badger Meter Swiss AG | Mittelholzerstrasse 8 | 3006 Bern | Switzerland | +41-31-932 01 11 Legacy Document Numbers: RTS-P-1 and RTS-P-2