Service Parts List: Bulletin No
Service Parts List: Bulletin No
Service Parts List: Bulletin No
4
8
3
5
6 7
2
19 9
10
20 11
1 2 3
24 29 12
18 8
19
13
17 27 14
28 15
16
24
26 27
28
25
22
23
21 22
23
FIG. PART NO. DESCRIPTION OF PART NO. REQ. FIG. PART NO. DESCRIPTION OF PART NO. REQ.
1 14-38-2550 Housing Kit (1) 15e 48-54-0100 Retention Nose Piece Kit
2 --------------- Right Housing (1) (Includes: 3/32", 1/8", 5/32" and 3/16"
3 --------------- M3 Screw (6) Retention Nose Pieces) (1)
4 43-72-2560 Mandrel Collector Assembly (1) 16 43-72-2550 Nose Pieces Holder (1)
5 45-76-2550 Mandrel Exit Tube (1) 17 14-30-2550 Motor & Electronics Assembly (1)
6 40-50-2550 Yoke Spring (1) 18 14-30-2555 Gear Case Assembly (1)
7 31-15-2550 Top Housing (1) 19 --------------- Gear Case (1)
8 05-81-2550 M4 x 0.7 Screw (4) 20 45-98-0500 Yoke Assembly (1)
9 45-22-2550 Sleeve (1) 21 43-72-2555 Belt Clip Kit (1)
10 40-50-2555 Jaw Pusher Spring (1) 22 --------------- Belt Clip (1)
11 44-60-2550 Pusher Tube Assembly (1) 23 --------------- Screw (1)
12 30-55-0035 Machine Jaws Kit (Set of 3) (1) 24 --------------- Left Housing (1)
13 43-56-2550 Guide (1) 25 45-96-0500 Wrench (1)
14 43-56-2555 Nose Housing (1) 26 45-72-0205 Trigger Kit (1)
15a 48-98-0005 3/32" Non-Retention Nose Piece (1) 27 --------------- Trigger Spring (1)
15b 48-98-0010 1/8" Non-Retention Nose Piece (1) 28 --------------- Trigger (1)
15c 48-98-0015 5/32" Non-Retention Nose Piece (1) 29 12-20-2551 Service Nameplate (Not Shown) (1)
15d 48-98-0020 3/16" Non-Retention Nose Piece (1) 30 10-20-2551 Warning Label (Not Shown) (1)
Nose Piece
Nose Housing Clean and lubricate the nose of the tool after heavy
use (5000 rivets) or if tool becomes contaminated
with dust and debris.
1. Remove battery pack.
Guide
2. Remove the nose housing from the tool and the
nose piece from the housing.
Machine Jaws
3. Remove the guide (with jaws), pusher tube, and
Pusher Tube spring from the tool.
4. Clean all pieces with a dry cloth and inspect for
damage. If damaged, return to a MILWAUKEE
service facility for repairs.
5. Apply a small amount of 51-08-4290 grease to
Jaw Pusher Spring the pieces and reassemble, as shown. Ensure
the jaws are properly seated in the guide.