Controles de La Bomba PDF
Controles de La Bomba PDF
Controles de La Bomba PDF
Página 1 de 9
Cerrar SIS
Pantalla anterior
Producto: EXCAVATOR
Modelo: 322C EXCAVATOR HEK
Configuración: 322C L Hydraulic Excavator HEK00001-UP (MACHINE)
POWERED BY 3126B Engine
Desarmado y Armado
322C Excavator Machine Systems
Número de medio -RENR3843-05 Fecha de publicación -01/10/2008 Fecha de actualización -07/10/2008
i01972318
Disassembly Procedure
Start By:
A. Remove the pump control. Refer to Disassembly and Assembly, "Pump Control - Remove" for
the machine that is being serviced.
NOTICE
Keep all parts clean from contaminants.
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the
component should be thoroughly cleaned. This will prevent dirt from entering the internal
mechanism.
Note: Only the right pump control is equipped with the proportional reducing valve in Steps 1 and 2.
For the left pump control, start the disassembly procedure with Step 3.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 14/06/2013
322C L Hydraulic Excavator HEK00001-UP (MACHINE) POWERED BY 3126B ... Página 2 de 9
Illustration 1 g00706151
Right Pump Only
1. Remove bolts (2). Remove proportional reducing valve (3) from pump control (1) .
Illustration 2 g00882597
Right Pump Only
2. Remove O-ring seal (7), O-ring seal (6), O-ring seal (5), and O-ring seal (4) from the
proportional reducing valve.
Illustration 3 g00706166
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 14/06/2013
322C L Hydraulic Excavator HEK00001-UP (MACHINE) POWERED BY 3126B ... Página 3 de 9
Illustration 4 g00882598
4. Measure the length of screw (13) for installation purposes. Remove screw (13). Remove bolts
(11). Remove cover (12) from the pump control.
Illustration 5 g00706177
Illustration 6 g00706179
6. Remove O-ring seal (15) and backup ring (16) from the stopper.
7. Repeat Step 3 through Step 6 for the other side of the pump control.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 14/06/2013
322C L Hydraulic Excavator HEK00001-UP (MACHINE) POWERED BY 3126B ... Página 4 de 9
Illustration 7 g00706239
8. Place the pump control in a soft jawed vise. Support pin assembly (17). Remove piston (18)
from the pump control. Remove pin assembly (17) from the pump control.
Illustration 8 g00706243
Illustration 9 g00706249
10. Remove bolts (20). Remove cover assembly (21) from the pump control.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 14/06/2013
322C L Hydraulic Excavator HEK00001-UP (MACHINE) POWERED BY 3126B ... Página 5 de 9
Illustration 10 g00882599
Personal injury can result from parts and/or covers under spring
pressure.
11. Remove O-ring seal (28). Remove retainer (29). Remove O-ring seal (27) from the retainer.
Remove nut (23) and nut (25). Remove setscrew (22). Remove adjuster (24). Remove O-ring
seal (26) from the adjuster.
Illustration 11 g00882601
12. Remove spring (30) and spring (31) from the pump control. Remove guide (32) from the pump
control. Remove ball (33) from the guide.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 14/06/2013
322C L Hydraulic Excavator HEK00001-UP (MACHINE) POWERED BY 3126B ... Página 6 de 9
Illustration 12 g00706265
Illustration 13 g00706266
Personal injury can result from parts and/or covers under spring
pressure.
14. Remove two bolts (35). Remove cover (36) from the pump control.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 14/06/2013
322C L Hydraulic Excavator HEK00001-UP (MACHINE) POWERED BY 3126B ... Página 7 de 9
Illustration 14 g00706267
Illustration 15 g00882608
16. Remove control piston (42), spring (41), spring (40), spool (39), and shims (38) from the
pump control.
Illustration 16 g00706271
Illustration 17 g00706272
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 14/06/2013
322C L Hydraulic Excavator HEK00001-UP (MACHINE) POWERED BY 3126B ... Página 8 de 9
Illustration 18 g00706273
19. Remove sleeve (45) and control linkage (46) from the pump control.
Illustration 19 g00882609
20. Remove slide plate (47) and dowel (48) from the control linkage.
Illustration 20 g00706275
21. Remove plugs (49). Remove three plugs (50) from the pump control.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 14/06/2013
322C L Hydraulic Excavator HEK00001-UP (MACHINE) POWERED BY 3126B ... Página 9 de 9
Illustration 21 g00706276
Copyright 1993 - 2013 Caterpillar Inc. Fri Jun 14 19:10:21 UTC+0200 2013
Todos los derechos reservados.
Red privada para licenciados del SIS.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 14/06/2013