R30C

®
HYDRAULIC TRACK DRILL
R30C
HYDRA-TRAC ®
More reach. More Profit.
The industry-leading pattern-coverage capabilities of the new Terex® Reedrill R30C result in
significant cost and time savings for your drilling operation. With the new R30C’s ability to drill
three and even four holes per set-up before having to tram and reposition, operators can reach
drilling deadlines much faster. This translates into greater profit.
More reach is achieved thanks to the 5 foot (1,524 mm) boom. The boom and the swing radius
provides huge pattern-coverage, twice the coverage of other drills in the industry.
R30C Drilling Coverage (7x8) R30C Drilling Coverage (8x9)
2
2 Copyright 200x Terex Corporation
The R30C features many improvements for increased
comfort, convenience, and outstanding performance.
The industry’s only field serviceable Rock Drills.
The heart of any top-hammer machine is the rock drill, and the R30C is certainly no exception. The renowned Terex®
Reedrill HPR Series of rock drills are used in a multitude of applications. The simple design—with the fewest internal
parts of any drill in the industry—reduces internal wear and allows easy field service, resulting in optimum uptime and
increased revenue.
HPR Rock Drills have a simple design, fewer parts, and more performance.
Other benefits and features of the Terex® Reedrill HPR series rock drill are:
• A proven oscillator valve design

Simple and very efficient; requires no new training for a service technician familiar with
Terex® equipment
• Oversized energy storage accumulators

Protect the drill valve cycle from energy spiking, add to the longevity of the parts and are
a source of reusable energy during the percussion cycle
• Highly efficient energy transfer between hammer and striking bar

Avoids issues that arise when the diameter of the striking face of the hammer does not
match the face of the shank, which causes one or the other to prematurely wear or fail;
a mismatch also creates heat in the oscillator, reducing the life of major components
• Longer life as a result of major supporting bushings made

of high-strength alloy
The alloy has many of the same properties of heat-treated material, including high
surface strength that extends the life of standard metals and component life, therefore
reducing operating costs.
The new Terex® Reedrill R30C sports the HPR4519 (19kW output power) rock drill as standard, with the higher energy
HPR5123 (23kW output power) available as an option. Either drill accepts 45 mm or 51 mm drill steel.
Additional exterior and performance features
The new R30C offers a wealth of new benefits that make it stand out in a crowded field of track drills. Bragging rights
belong to the Terex Reedrill SmartDrill drilling system, which uses anti-jam, anti-plug and anti-plunge features to lengthen
drill-string life and has proven to increase overall production. The new R30C features a powerful Tier III C-9 engine.
From top to bottom, inside and out, the new Terex® Reedrill R30C has been designed to get you drilling fast—and to
keep you drilling longer.
Interior features
The innovative features of the new R30C continue inside

as well, starting with a large cab that’s operator-friendly.
Several enhancements that make it inviting to operators include:
• Comfortable operator’s seat and ample leg room that
promote productivity
• Armchair joystick controls allow for comfortable operation

throughout long shifts
• Excellent visibility enables fast set-up time, which

increases productivity
• ROPS/FOPS-certified cab
Copyright 200x Terex Corporation 33
Terex® Reedrill R30C Self-Contained Hydraulic Track Drill
General Specifications
Hole Diameter Up to 5 inches Up to 127 mm
Weight 43,400 lbs 19,727
Overall width 102 inches 2,590 mm
Overall height 123 inches 3,124 mm
Drifter
Model & KW HPR4519 25hp 19kW
Weight 660 lbs 300 kg
Number of blows 2,500-2,700 bpm 2,500-2,700 bpm
Number of revolutions 0-300 rpm 0-300 rpm
Optional HPR5123 30 hp 23 kW
Tramming
Ground Clearance 15 inches 380 mm
Tramming speed 2.4 mph 4 kph
Gradeability 35 degrees 35 degrees
Track Pad Width 15.1 inches 380 mm Diesel Engine
Guide Shell Model CAT Tier III C-9 Tier III C-9
Max. starter rod, standard 240 inches 5,485/4,267 mm Speed 1,800 rpm 1,800 rpm
Max. single pass, optional 222 inches 5,639 mm Fuel Capacity 130 gal 492 I
Feed rate 120 ft/min 37m/min Rated Output 300 hp 223 kW
Compressor Hydraulic System
Model Gardner Denver Gardner Denver Type of Pump piston piston
Free air delivery maximum 350 cfm 8.2m3/min Reservoir capacity 107 gal 405 I
Working pressure 150 psig 10 bar Boom
Rod Changer Boom length 150 inches 3,810 mm
Number of rods x length 5 rods, 12 or 14 ft 5 rods, 3,658 or 4,267 mm Boom sing angle 70 L, 33 R deg 70 L, 33 R deg
Cab noise level less than 80 dBa 80 dBa Boom extension 60 inches 1,524 mm
Effective Date: October 2008. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in
this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to
follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only
warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty,
expressed or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and/or its subsidiaries in the
USA and other countries. All rights are reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries.
Copyright 2008 Terex Corporation.
Terex Mining
5601 Granite Parkway, Suite 500, Plano, TX 75024, U.S.A.
Tel +1 (972) 265-7100 Fax +1 (972) 265-7190
sales@terexmining.com www.terexmining.com

R30C

Uploaded by

Copyright:

Available Formats

R30C

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

R30C

Uploaded by

Copyright:

Available Formats

®

HYDRAULIC TRACK DRILL

R30C Drilling Coverage (7x8) R30C Drilling Coverage (8x9)

• A proven oscillator valve design

• Oversized energy storage accumulators

• Highly efficient energy transfer between hammer and striking bar

• Longer life as a result of major supporting bushings made

Additional exterior and performance features

The innovative features of the new R30C continue inside

• Armchair joystick controls allow for comfortable operation

• Excellent visibility enables fast set-up time, which

You might also like