Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

EVS - Notes

Download as pdf or txt
Download as pdf or txt
You are on page 1of 73

Environmental Science and Engineering

ENVIRONMENT, ECOSYSTEM AND BIODIVERSITY


DEFINITION, SCOPE AND IMPORTANCE
Environmental science is the study of nature and the facts about environment. Basically
environment can be defined as “all the social, economical, physical & chemical factors that
surrounds man” (or) “all abiotic and biotic components around man-all living and non living
things surrounds man”.

Environment Components can be divided into biotic and abiotic components.


According to ancient man the environment was the Panchaboodhas (i.e) air, water, land, sky and
energy. The human were disciples of nature. They were able to protect themselves from
harmful one and protect the others. But according to modern man the env. is only air land and
water. Exploitation of various earth resources to satisfy the increasing needs of human
population has resulted in 1) depletion of various resources of earth 2) pollution.
Principles of environmental education:
 Examine the major environmental issues

 discover the root cause


 develop problem solving skills
 promote co-operation in solving problems
 emphasis active participation in prevention and solution to problems.

Scope of environmental science:


 Studying the interrelationship between the components of env.

 Carrying out impact analysis and env. Audit


 Preventing pollution from existing and new industries
 Stopping the use of biological and nuclear weapons
 Managing unpredictable disasters etc.

Public awareness:
Environmental Pollution or problems cannot be solved by mere laws. Public participation is
an important aspect which serves the environmental Protection.
 Public awareness of environmental Is at infant stage
 30-40% of public of developing country are aware of environmental. Problems but they
do not bother about it.
 Ignorance and incomplete knowledge has lead to misconceptions

Page 1 of 73
Environmental Science and Engineering

 Development and improvement in std. of living has lead to serious environmental


disasters

 Debate on environmental Issues are treated as anti-developmental

Reasons for environmental Ignorance:


 science, technology and economics failed to integrate the knowledge on environmental
Aspects in curriculum

 the decision makers do not process environmental Angle of decision making


 consideration of economic growth, poverty eradication has lead to environmental
Degradation
 only few developmental activities are made considering the environmental Aspects.

Need For Public Awareness:


The United Nations Conference on Environment and Development held at Reo de Janeiro
in 1992 (popularly known as „Earth Summit‟) and world summit on sustainable development at
Johannesburg in 2002, have highlighted the key issues of global environmental concern. They
have attracted the attention of people.
Any government at its own cannot achieve the goals of clear environment until the public
participate in action. Public participation is possible only when the public is aware about the
ecological and environmental issues. Eg. Ban- the littering of polythene.

Methods to propagate environmental Awareness:


1. Among students through education – introducing environmental studies in the curriculum.
2. Among public through mass media- environmental programmmes through TV, radio etc.
3. Among decision makers, planners, leaders etc.

Role of NGOs
1. Advise the government in interacting with ground level people

2. Organize public meetings to create environmental awareness


Eg. Recent report of „centre for science and environment‟ on permissible limits of pesticides in
cola drinks.
Public awareness is needed in the area

1. study of natural resources-conservation and management


2. ecology and biodiversity – conservation
3. environmental Pollution and prevention

Page 2 of 73
Environmental Science and Engineering

4. social issues related to development and environment


5. human population and environment.

Concept Of Ecosystem:
Living organisms cannot be isolated from their non-living environment because the later
provides materials and energy for the survival of the farmer. An ecosystem is therefore defined
as a natural functional ecological unit comprising of living organisms and their non-living
environment that interact to form a stable self supporting system .
Eg. Pond, lake, desert, grassland, forest, etc.
Ecosystems
Ecology – earnest Haeckal- 1869 –derived from „oikos‟ – home , logy – study
-deals with the study of organisms in their natural home interacting with their surroundings.
Ecosystem – Tansley (1935) – self regulating group of biotic communities of species
interacting with one another and with their non-living environment exchanging energy and
matter
Ecosystem characteristics
Structural features – composition and organization of biological communities and abiotic
components constitute – Structure of Ecosystem
Biotic structure – Plants , animals , microorganisms – form biotic components – nutritional
behavior and status in the ecosystem – producers or consumers – how do they get their food.

Structure of Ecosystem
1. Abiotic or non-living components or physical components
2. Biotic or Living components
3. Energy components.
Abiotic Components:
Abiotic components enter the body of living directly or indirectly take part in
metabolic activities and return to environment.
Abiotic components are as follows
1. Atmosphere –The cover of air that envelopes the earth is known as atmosphere. Compostion
– Nitrogen-78%, oxygen- 2%, other gases- 1%
2. Lithosphere or Interior of Earth – Solid Earth –Radius 6371- density -5.5
3. Hydrosphere – 97% earth‟s water is in oceans – Fresh water – 3%.

Page 3 of 73
Environmental Science and Engineering

Structure of Atmosphere:
Five Layers
1. Troposphere –lower portion – extends from 0-18 kms, temperature-
2. Stratosphere -18- 50 kms- Temperature (-2ºC to -56ºC )- Ozone layer
3. Mesosphere- extends from 50-85 kms- Temperature drops to (-95ºC)
4. Ionosphere or Thermosphere –extends up to 500 kms. Temperature – raises up to 1200ºC
5. Exosphere – extends up to 1600 km- temperature very high due to solar radiation.

Functions of Atmosphere:
It maintains heat balance on the earth by absorbing IR radiation.
Oxygen – support life on living organism.
Co2 - essential for photosynthetic activity of plants.

N2 - essential nutrient for plant growth.


Interior of Earth or Lithosphere:
Three major Zones
1. Crust – top most layer- solid thickness 30 – 40 Km in continents and 5 – 6 km in oceans.
Rocks of the earth crust – 3 types – Igneous , Sedimentary, Metamorphic.
2. Mantle – average density 3.3 – Thickness – 2860 – density increases with depth.
3. Core – (outer core – solid , inner core – liquid). depth – 2900 km from the surface of the
earth – density -12 – not exact composition.
Functions of Lithosphere:
1. It is home for human beings and wild life.
2. It is store house of minerals and organic matter.
Functions of Ecosystems
Ecosystem characteristics
Structural features – composition and organization of biological communities and abiotic
components constitute – Structure of Ecosystem
Biotic structure – Plants , animals , microorganisms – form biotic components – nutritional
behavior and status in the ecosystem – producers or consumers – how do they get their food.
Producers – Photosynthesis – photoautotroph (auto – self, photo- light)
Chemotrops or Chemosynthetic organisms – Chemicals
Consumers – feeding upon other organisms

Page 4 of 73
Environmental Science and Engineering

Types – Herbivores – Plant eating animals – primary consumers Eg ; rabbit


Carnivores – Feed on consumers – Secondary Consumers - feed on other carnivores – Tertiary /
Consumers.
Omnivores – feed on both plants and animals – eg. Humans, rat, fox.
Detritivores - (Detritus feeder or Saprotrophs ) – feed on dead on organisms or decomposed
matter eg; beetles, termites,ants , crabs, earthworms.

Decomposers – nutrition breaking down in to complex organic molecules to simpler organic


organic compounds – bacteria and fungi.
Abiotic Structure. – physical and chemical components of an ecosystem.
Physical factors – sunlight , temperature ,annual rainfall, soil type, water availability, water
currents etc. –strong influence on the ecosystem.
Chemical factors; major essential nutrients – C, N, P, H, O, S.
Biotic Components – Abiotic components and viceversa – linked through – energy flow, matter
cyling.

Functional Attributes.
1. Food chain, Food web and trophic structure.
2. Energy flow
3. Cycling of Nutrients (Biogeochemical cycles)
4. Primary and secondary production
5. Ecosystem development programme

Food Chains
- Sequence of eating and being eaten in an ecosystem.

Grass Grasshopper Frog snake Hawk


(Grassland Ecosystem)
Grazing food chains – Starts with green plants.

Grass Rabbit Fox


Phytoplanktons Zooplanktons Small fish Carnivores (fish)

Page 5 of 73
Environmental Science and Engineering

Food Web
- Network of food Chains

ENERGY FLOW IN ECOSYSTEM:


Energy is defined as the capacity to do work. For living organisms, it is the basic force
responsible for running all the metabolic activities. The flow of energy from producer level to
top consumer level is called energy flow.
The flow of energy in an ecosystem is unidirectional. It flows from producer level to consumer
level and never in the reverse direction.
The process of energy flow involves transfer of energy from autotrophs to various components of
heterotrophs and help in maintaining bio diversity. The main source of energy in the ecosystem
is sunlight. About 80% of energy is lost during flow of energy from one trophic level to the next
one.
Sun Producer Herbivores Carnivores Top carnivores Decomposers

ECOLOGICAL SUCCESSION
FOOD CHAIN
Plants by photosynthesis convert solar energy into protoplasm. Small herbivores consume the
vegetable matter and convert into animal matter which in turn eaten by large carnivores. This
sequence of eaten and being eaten , produces transfer of food energy known as food chain.
Producers Consumer I order Consumer II order Decomposers
(Plants) (Deer) (Tiger, Lion) (Bacteria, fungi)

FOOD WEB:
The food relationship between various organisms is being depicted by linking all the possible
prey and predators of different food level. In an ecosystem linking of feeding habit relations will
provide a food web.

Mouse snake
Grass Rabbit Hawk
Grasshopper Lizard

Page 6 of 73
Environmental Science and Engineering

ECOLOGICAL PYRAMIDS:
The energy biomass and number of organisms gradually decreases from the producer level to the
consumer level. The total mass of herbivores in an ecosystem will generally be less than the
total mass of plants. Similarly the total mass of carnivores will be less than the total mass of
herbivores. The graphical representation of the number, biomass and energy of various energy
levels is called ecological pyramid. In any ecological pyramid the producer forms the base and
the successive levels form the tires which can make the apex.
Types of ecological pyramids:
a) pyramid of numbers
b) pyramid of biomass
c) pyramid of energy

Eg. Grassland ecosystem – pyramid of number – upright pyramid

birds

insects

Worms

grass

Parasite ecosystem – pyramid of number – inverted pyramid

Bacteria, fungi

Parasites

Birds

Tree

Page 7 of 73
Environmental Science and Engineering

MAJOR TYPES OF ECOSYSTEMS


a. FOREST ECOSYSTEM
Definition: It is a natural ecosystem consisting of dense growth of trees and wild animals
Types: tropical – deciduous, evergreen, wet green

Littoral and swamps


Sub tropical
Characteristics:
Abiotic: soil, sun light, temperature etc
Biotic : forest trees, shrubs and animals
Structure:

Producer : trees and shrubs


Consumer : Primary – elephants, deer etc.
Secondary – snakes, birds, lizards etc
Tertiary – lions, tigers etc
Decomposers : fungi, bacteria
Functional components:

Ecological pyramids (upright)

lions

lizards

deers

trees

Page 8 of 73
Environmental Science and Engineering

GRASSLAND ECOSYSTEM:
dominated by grass – few shrubs and trees are also found – rainfall average but erratic –
overgrazing leads to desertification.
Three types – depending on the climate
1. Tropical grass lands – found near the boarders of tropical rain forests. Eg. Savannas in
Africa. Animals – Zebra, giraffes etc. – fires are common in dry seasons – termite
mounds produce methane – leads to fire – high in photosynthesis – deliberate burning
leads to release of high CO2 – global warming.
2. Temperate grasslands – flat and gentle slopes of hills. Very cold winter and very hot
summer - dry summer fires do not allow shrubs and trees to grow – soil is quite fertile –
cleaned for agriculture.
3. Polar grasslands – found in arctic polar region – organism – arctic wolf, fox, etc. – A
thick layer of ice remains frozen under the soil surface throughout the year – known as
permafrost – summer insects and birds appear.

Components:
Structural Components:
Abiotic: soil pH, nutrients, soil moisture, temp, climatic conditions, etc.

Biotic: grass, caterpillar, butterfly, worms, insects, birds, etc.


Functional components:
Ecological pyramid

birds

insects

Worms

grass

Page 9 of 73
Environmental Science and Engineering

Energy flow:

Grass worms Insects small birds  huge birds

Decomposition

sediments

c. DESERT ECOSYSTEM
Types:
1. tropical desert-found in Africa-Sahara and Rajasthan –Thar
2. temperate desert-south California-Majave
3. cold desert-China-Gobi desert
Characteristics:
1. Air is dry

2. Climate is hot
3. Annual rainfall is less than 25 cm
4. Vegetation is poor
d.AQUATIC ECOSYSTEM
Definition:
Deals with water bodies and biotic communities present in them-Classified as fresh water
and marine ecosystems. Fresh water systems are classified as lentic and lotic ecosystems.
Types:
1. Pond ecosystem: Small fresh water ecosystem – seasonal in nature – organisms: algae,
aquatic plants, insects, fishes etc. Ponds are very often exposed to anthropogenic
pressure like cloth washing, bathing, cattle bathing, swimming etc.
2. Lake ecosystem: Big fresh water ecosystem – Zonation or stratification, especially
during summer is a common one.

Page 10 of 73
Environmental Science and Engineering

Top layer – shallow, warm, prone to anthropogenic activities – Littoral zone


Second layer – enough sunlight, high primary productivity – Limnetic zone
Third layer – very poor or no sunlight – Profundal zone
Eg. Dal lake in Srinagar, Naini lake in Nainital

Organisms: planktons – phytoplankton eg. Algae – zooplankton eg. Rotifers


Nektons – that swims in water eg. Fishes
Neustons – that float on the surface of water
Benthos – that attached to sediments eg. Snails

Types of lakes : Many types- oligotrophic lakes – with less nutrient content – eutrophic
lakes – with very high nutrient content due to fertilizer contamination – desert salt lakes –
that contains high saline water due to over evaporation – volcanic lakes – formed by
water emitted from magma due to volcanic eruptions – dystrophic lakes – that contains
highly acidic water (low pH) – endemic lakes – lakes that contain many endemic species
– etc.
3. Streams: fresh water ecosystem where water current plays a major role. Oxygen and
nutrient content are uniform. Stream organisms have to face extreme difference in
climatic conditions but they do not suffer from oxygen deficiency as pond and lake
organisms. This is because large surface area of running water provides more oxygen
supply. The animals have very narrow range of tolerance towards oxygen deficiency.
Thus stream are worst victims of industrial pollution.
River ecosystem: large streams flowing from mountain highlands are rivers.
Three phases: 1. mountain highlands – rushing down water fall of water – large quantity
of dissolved oxygen – plants attached to rocks and fishes that require more oxygen are
found. 2. Second phase – gentle slopes of hills – warmer – supports the growth of plants
and fishes that require less oxygen are seen. 3. Third phase: river shapes the land – lots
of silts, nutrients are brought – deposited in plains and delta – very rich in biodiversity.
4. Oceans: Gigantic reservoirs of water covering >70% of earth surface – 2,50,000 species
– huge variety of sea products, drugs etc. – provide Fe, Mg, oils, natural gas, sand etc. –
major sinks of carbon di oxide – regulate biochemical cycles.
Two zones: coastal zone – warm, nutrient rich, shallow – high sunlight – high primary
productivity. Open sea – away from continental shelf – vertically divided in to 3
zones. 1. euphotic zone – abundant sunlight 2. bathyal zone – dim sunlight 3.
abyssal zone – dark zone – world‟s largest ecological unit.

Estuary: coastal area where river meet ocean – strongly affected by tidal actions – very
rich in nutrients – very rich in biodiversity also – organisms are highly tolerant – many
species are endemic – high food productivity – however to be protected from pollution.

Page 11 of 73
Environmental Science and Engineering

Characteristics:
Structural Components:
Abiotic: pH, nutrients, D.O, temp, climatic conditions, etc.
Biotic: Phytoplankton, fishes, snails insects, birds, etc.

Functional components:
Ecological pyramid

birds

fishes

Worms,

insects

phytoplankton

Energy flow:

Phytoplankton Insects small fishes huge fishes

Decomposition

sediments

INTRODUCTION TO BIODIVERSITY
 Biodiversity is the abbreviated word for “biological diversity” (bio-life or living organisms,
diversity-variety). Thus biodiversity is the total variety of life on our planet, the total number
of races, varieties and species. The sum of total of various types of microbes, plants and
animals (producers, consumers and decomposers) in a system.

Page 12 of 73
Environmental Science and Engineering

Biomes can be considered life zones, environment with similar climatic, topographic and soil
conditions and roughly comparable biological communities (Eg. Grassland, forest). The
biomes shelter an astounding variety of living organisms (from driest desert to dripping rain
forest, from highest mountain to deepest ocean trenches, life occurs in a marvelous spectrum
of size, shape, colour and inter relationship). The variety of living organisms, the
biodiversity, makes the world beautiful.

There are 1.4 million species known presently. But based on new discoveries, by research
expeditions, mainly in tropics, taxonomists estimate there are between 3-50 million different
species may be alive today. Insects make up more than one half of all known species and
may comprise more than 90% of all species on earth.
 The concept of biodiversity may be analyzed in 3 different levels. They are
1 ecosystem diversity
2 species diversity
3 genetic diversity
Ecosystem or ecological diversity means the richness and complexity of a biological
community, including tropic levels, ecological processes (which capture energy), food webs
and material recycling.
Species diversity describes the number of kinds of organisms within individual communities
or ecosystems.
Genetic diversity is a measure of the variety of versions of same gene within individual
species.

Biodiversity Hotspots:
Most of the world‟s biodiversity are near the equator especially tropical rain forest and coral
reefs. Of all the world‟s species, only 10-15% live in North America and Europe.

The Malaysian Peninsula, for instance, has at least 8000 species of flowing plants, while
Britain, with an area twice as large, has only 1400 species. South America has 200 000
species of plants.
Areas isolated by water, desert or mountain can also have high conc. of unique species and
biodiversity. New Zealand, South Africa and California are all mid-latitude area isolated by
barriers that prevent mixing up of biological communities from other region and produce
rich, unusual collection of species.

Significance of Biodiversity:

Biosphere is a life supporting system to the human race. Each species in the biosphere has its
own significance.
It is the combination of different organisms that enables the biosphere to sustain human race.
Biodiversity is vital for a healthy biosphere.
Biodiversity is must for the stability and proper functioning of the biosphere.
Page 13 of 73
Environmental Science and Engineering

Besides these biodiversity is so important due to having consumptive use values, productive
use values, social values, ethical values and aesthetic values.

Benefits of biodiversity:
We benefit from other organism in many ways. Even insignificant organisms can play
irreplaceable roles in ecological systems or the source of genes or drugs that someday
become indispensable.
Food: Many wild plant species could make important contributions to human food suppliers
either as they are or as a source of material to improve domestic crops. About 80,000 edible
plants could be used by human.
Drugs and medicine: Living organisms provides many useful drugs and medicines. The
United Nations Development Programme derived from developing world plants, animals and
microbes to be more than $30 billion per year.
Eg. For natural medicinal products
Penicillin – fungus is the source – Antibiotic

Quinine – chincona bark - Malaria treatment


Morphine – poppy bark – Analgesic
Twenty years before, once the drugs were not introduced, childhood leukemia was fatal.
Now the remission rate for childhood leukemia is 99%.

Ecological benefits:
Human life is inextricably linked to ecological services provided by other organisms.
Soil formation, waste disposal, air and water purification, solar energy absorption, nutrient
cycling and food production all depend on biodiversity. In many environments, high
diversity may help biological communities to withstand environmental stress better and to
recover more quickly than those with fewer species.

Threats to biodiversity:
Due to

 Habitat loss
Deforestation activities (cutting trees for timber, removal of medicinal plants)
Production of hybrid seeds requires wild plants as raw material, farmers prefer hybrid
reeds, many plant species become extinct
Increase in the production of pharmaceutical companies made several number of
medicinal plants and species on the verge of extinction.
Removal of forest-cover for road laying and also due to soil erosion
Illegal trade of wild life
Population explosion, construction of dam, discharge of industrial effluents use of
pesticides.

Page 14 of 73
Environmental Science and Engineering

 Poaching of wild life


Due to poaching, illegal trade and smuggling activities most of our valuable fauna are under
threat organised crime has moved into illegal wild life smuggling because of huge profit Eg.
Tiger, Deer – for hides, Rhinoceros – for horns, Elephant – for ivory tusk, Sea Horse, Star
turtle – sold to foreign market.
(Extinction, the elimination of species, is a normal process of the natural world. Species die
put and are replaced by others as part of evolutionary change.
Human caused reduction: The climate change caused by our release of green house gases in
the atm. could have catastrophic effects. Human disturbance of natural habitat is the largest
single cause pf loss of biological diversity. Woodlands and grasslands are converted now use
about 10% of the world‟s land surface for crop production and about twice the amount for
pasture and grasslands.)
Hunting: Over harvesting is responsible for depletion or extinction of many species.
Eg. The American passenger pigeon was the world‟s most abundant bird. In spite of this
vast population, market hunting and habitat destruction caused the entire population to crash
with in 20 years.
 Fragmentation;
Habitat fragmentation reduces the biodiversity because many animals like bears and
large cats require large territories to subsist. Some forest birds reproduce only in deep forest
or habitat far from human settlement. A large island for example, can support more
individuals of given species and therefore less likely to suffer extinction due to genetic
problems and natural catastrophes.
 Commercial products:
Smuggling of fuels, hides, horns and folk medicines also affect the biodiversity in an
abrupt manner.

Conservation of biodiversity:
In general biodiversity is generally disturbed by human activities. To solve the problems,
it is essential to protect our bio diversity by two ways.
1. In-situ or on-site conversion
2. Ex-situ conservation
In-situ conservation:
 Conservation of species in its natural habitat, in place where the species normally occurs
 The strategy involves establishing small or large protected areas, called protected areas
 Today in world, there are 9800 protected areas and 1500 national parks

Page 15 of 73
Environmental Science and Engineering

Methods:
1. Nature or biosphere reserves (Eg) Nilgiri Bio reserve
2. national parks and sanctuaries (Eg) Mudumalai, vedanthangal
3. on farm and home garden conservation for plants, vegetables and fruits to
maintain traditional crop varieties.
Ex- situ conservation:
 It involves maintenance and breeding of endangered plant and animal species under
partially or wholly controlled conditions in zoos, gardens and laboratories
 The crucial issue for conservation is to identify those species which are more at risk of
extinction.
Methods:
1. long term captive breeding
2. shortage term propagation and release
3. animal translocation and re introductions
4. seed bank
5. reproductive technology
(i) embryo transfer technology
(ii) cloning

Review questions:

1. Define Environmental science

Environmental science is the study of the environment, its biotic and abiotic components and
their interrelationships.
2. What are the important components of environment?
Abiotic or non-living components

Biotic or living component


Energy component
3. What are the processes involved in hydrological cycle?
Continuous evaporation, transpiration, precipitation of surface run off and ground water
4. Define biogeochemical cycle. Give example.
The continuous circulation of all the essential elements and compounds required for life, from
the environment to the organism and back to the environment.e.g., carbon cycle
5. What are the functions of lithosphere?
It is a home for human beings and wild lives.
It is a store house minerals and organic matters
Page 16 of 73
Environmental Science and Engineering

6. Mention the various types of public participation.


 Pressure group
 Watch dog
 Advisory council
 Enforcing the environmental laws
7. Explain biosphere?
The part of lithosphere, hydrosphere and atmosphere in which living organisms live and interact
with one another is called biosphere

Page 17 of 73
Environmental Science and Engineering

UNIT 2: ENVIRONMENTAL POLLUTION

ENVIRONMENTAL POLLUTION-DEFINITION:-
Any undesirable change in the physical, chemical or biological characteristics of any
component of the environment (air, water, soil) which can cause harmful effects on various
forms of life or property.
Types of environmental pollution:-
a) Air pollution
b) Water pollution
c) Soil pollution
d) Marine pollution
e) Noise pollution
f) Thermal pollution
g) Nuclear hazards

a)AIR POLLUTION:
It is an atmospheric. condition where certain substances are present in conc. which can
cause undesirable effects on man and his environment.
Ex. Gases, particulate matter, radioactive substances etc.
Gaseous pollutants – sulphur oxides, nitrogen oxides, carbon oxides, volatile organic compounds
Particulate pollutants – smoke, dust, soot, fumes, aerosol, liquid droplets, pollen grains
Radio active pollutants – Radon 222, Iodine 131, Sr 90

Page 18 of 73
Environmental Science and Engineering

Sources of air pollution

Natural sources man made sources(anthropogenic)


1. Volcanic eruption thermal power plants (fly ash, SO2)
2. Forest fires industrial units
3. Biological decay vehicle emission-
(CO-77%, HC-14%, NOX-8%)-
(Heavy duty diesel vehicles- more NOX and
SPM
Petrol vehicles – CO & HC)
4. Sea salt spray fossil fuel burning
5. Pollen grains of flowers Agricultural activities
Metallurgical plants (SO2, CO2)
Fertilizer plants

Textile mills
Refineries
Paper and pulp mills
Classification of air pollutants:
Air pollutants

According to origin According to state of matter

Primary pollutants secondary pollutants


(SO2, NOX, smoke) (PAN, SO3, aldehydes)
Gaseous air particulate air

pollutants pollutants
(CO2, NOX) (dust, mist)

Page 19 of 73
Environmental Science and Engineering

Indoor air pollution:


Radon is an important air pollutant. It can be emitted from building materials like bricks,
concrete, tiles etc. which are derived from soil containing radium. Burning of fuel produce
pollutants like CO, SO2, soot and many other like formaldehyde, benzo(a)pyrene (BAP) are
toxic and harmful for health. BAP is also found in cigarette smoke and is considered to cause
cancer. A person using wood as fuel for cooking inhales BAP equivalent to 20 packets of
cigarette a day.
Effects of air pollution:
Effects on human:
Human respiratory system has a number of mechanisms for protection from air pollution.
Bigger particles (> 10 micro m) can be trapped by the hairs and sticky muscus lining in the
nose.

S. No. Pollutant Sources Effects on human

1 Aldehydes Thermal Irritates nasal and respiratory tracts


decomposition of fats
and oils

2 Ammonia Chemical processes, Upper respiratory passage


dye making,
explosives and
fertilizers

3 Arsenic Coal and oil furnaces Damages kidney, cause jaundice,


lung and skin cancer

4 Carbon Monoxide Motor exhausts, oil damages lungs and heart


and coal furnaces

5 Cadmium oil and coal furnaces Damages kidney

6 Chlorine Chemical industries Attacks respiratory tracks, mucous


membranes

7 Hydrocarbons Unburnt gasoline Fog formed with combination of


vapours NOx affects respiratory system

8 Hydrogen Sulfide Sewage treatment, Irritates eyes, causes nausea, bad


refineries odour

9 Nitrogen oxides Motor vehicle Bronchitis


exhaust

Page 20 of 73
Environmental Science and Engineering

10 Ozone Photochemical Eye irritation, aggressive asthma


reactions

11 Sulphur dioxide Coal and oil Obstructs breathing, irritates eyes


combustion

12 Suspended solids Industrial Eye irritation, asthma, air


manufactures suffocation, lung cancer

Control of air pollution:

1. Using non conventional energy


2. Using bio filters
3. Planting more trees
4. Reducing vehicle exhausts
5. Using less polluting fuels
6. Using mass transport
7. Removal of particulate matter using electrostatic precipitator, cyclone filter etc.
8. Setting of industries of EIA
9. Removal of NOX from vehicle exhaust

b)WATER POLLUTION:
Presence of foreign impurities (organic, inorganic, biological) in such quantities so as to
constitute a health hazard by lowering the water quality and making it unfit for use.
Causes:
Point source Ex: flow of water pollutants from sewerage system, industrial effluent etc.
Non-point source Ex: agricultural land (pesticides, fertilizers, mining, construction sites)

Classification of water pollutants:


1. suspended matter
2. thermal discharge
3. pathogens (bacteria, fungi, protozoa fungi)
4. natural organic pollutants
5. synthetic organic pollutants
6. inorganic chemicals
7. radioactive waste, oil, sediments

Page 21 of 73
Environmental Science and Engineering

Effects of water pollution


1. Objectionable colour and odour is unacceptable and unsuitable for drinking and other
purposes.
2. highly turbid and very hard water is unpleasant to drink, food processing
3. acid and alkaline water cause serious health problem
4. water borne infectious enteric disease like typhoid, cholera, dysentery, are the
predominant health hazard arising from drinking contaminated water
5. radioactive pollution enter human body through food and get accumulated in thyroid
gland, liver, bones and muscles
6. biodegradable waster deplete D O in the receiving stream, affect the flora cause creates
anaerobic conditions
7. non biodegradable waste and pesticides travel the food chain and ultimately reach human
where they accumulate in fatty tissues
8. thermal discharge in stream depletes D O
9. phosphate, nitrate, promote the growth of algae and encourage eutrophication
10. Industrial effluents result in addition of poisonous chemicals such as arsenic, mercury,
lead may reach human body through contaminated food.

Control measures of water pollution


1. lay down standard for
a. drinking water
b. disposal of waste water into water course/sewer/land
2. monitoring
3. treatment
a. domestic treatment
 screening
 sedimentation
 filtration, pH adjustment
 disinfection
b. waste water treatment
 preliminary treatment
 primary treatment
 secondary treatment
 advanced treatment

Page 22 of 73
Environmental Science and Engineering

C) SOIL POLLUTION:-
The contamination of soil by human and natural activities which may cause harmful
effects on living beings.
Causes:-
 Industrial waste
 Urban waste
 Agricultural practices
 Radioactive pollutants
 Biological agent
Effects:-

 Affect human health


 Affect soil fertility
 Reduce soil productivity
 Cause abnormalities
Control measures:-
 Properly collect solid waste
 Microbial degradation
 Recovery of products from waste
 For methane generation, use cattle dung
 For biogas generation, use biodegradable organic waste

d) MARINE POLLUTION:-
The discharge of waste substances into the sea resulting in harm to living resources,
hazards to human health, hindrance to fishery and impairment of quality for use of sea water.
Causes:-
 Rivers
 Catchment area
 Oil drilling and shipment.
Sources:
 waste disposal
 oil spill
 thermal pollution (plants located nearby coastal areas)
 ship breaking activities
 aquaculture practices
 nuclear test conducted in seas and oceans
Effects:
 disturb entire aquatic or marine ecosystem
 oil has suffocation effect on most aquatic animals

Page 23 of 73
Environmental Science and Engineering

 smaller animals can be caught in oil envelope and die


 thermal
 Pollution may increase the temp. of water and DO may be depleted which causes
danger.
 There may be chances for bioaccumulation and bio magnification in the food chain
due to the disposal of non-degradable wastes
 Oil promotes anaerobic conditions by preventing diffusion of oxygen from air
 Disposal of radio active wastes cause chronic, acute and genetic damage
 Affects the recreational activity along the beaches
 Affect sensitive flora and fauna
 Loss of buoyancy
 Affect phytoplankton, zooplankton, algal species, coral reefs, fish, birds and
mammals.
Control measures:-
 Ban to dump the toxic, hazards waste and sewage sludge.
 Prevent sewer overflows
 Minimize coastal developmental activities
 Oil ballast should not be dumped into sea.

e) NOISE POLLUTION:-
Sound is mechanical energy from a vibrating source
Unpleasant and unwanted sound is called noise
Sound can propagate through air, liquid or solid
Sound is pressure perturbation in the medium through which it travels. Sound pressure creates
alternate compression and rarefaction. The number of c and r per unit time is called frequency.
Sound pressure does not produce linear impact on human. A logarithmic scale has been devised.
Noise is measure in terms of SPL which is a log ratio of sound P to a std. P. It has a
dimensionless unit decibel (dB). The international reference P is 2X10 power -5 Pa. Sound can
affect ears either by loudness or by pitch (frequency). The CPCB has recommended the
permissible noise levels for various places.

Page 24 of 73
Environmental Science and Engineering

Area Permissible
noise level(dB)

Day Night

Industrial 75 70

Commercial 65 55

Residential 55 45

Silent Zone 50 40

Sounds and their decibel scale:


1. Rocket engine – 180 dB
2. Jet plane take off – 150 dB
3. Threshold of pain – 140 dB
4. Recorded music (max) – 130 dB
5. Construction works, news paper press – 100 dB
6. Motor cycle – 90 dB
7. Ordinary conservation – 70/80 dB
8. Air conditioning unit/ Light traffic – 60 dB
9. Normal living room – 50 dB
10. Library or soft whisper – 30 B
11. Threshold of hearing – 0 dB
Sources of noise pollution:
1. Industrial units
2. Transportation modes
3. Construction activities
4. Celebrations
5. Electric home appliances
Nanjing – 105 dB

Rome – 90 dB
Calcutta – 85 dB
Mumbai – 82 dB
Delhi – 80 dB
Effects of noise pollution:
 Interferes communication
 Hearing damage (90 dB)
 Physiological and Psychological disorders

Page 25 of 73
Environmental Science and Engineering

Noise pollution during Diwali:


The environmental (protection) (2nd amendment) Rule 1999 has given the permissible limit of
noise level produced from fire crackers to be 125 dB. According to recent test reports on fire
crackers by National Physical Laboratory, the fire crackers available in the market produce noise
beyond the permissible limit.
Atom bomb – 135-138 dB
Hydrogen bomb – ”
The Union Government and all the state governments shall follow the guidelines of amendment
89 of env. (Protection) Rule 1986 framed under Env. (Protection) Act 1986 which says
1. The manufacture, sale or use of fire crackers generating noise level exceeding125dB shall
be prohibited.
2. For joined fire crackers the limit is taken as 5log 10 (N) dB; where N= no. of crackers
joined together
3. The use of fire crackers shall not be permitted except between 6.00a.m and 10p.m.
4. No crackers burning is permitted in/near silent zone – areas near hospitals, educational
institutions, courts, religious places, etc.
5. The State Education Resource Centre shall take appropriate steps to educate students
about the ill effects of air and noise pollution.

Control of noise pollution:

 Reduction in source of noise]


 Noise making machines should be kept in containers with sound absorbing media
 Proper oiling will reduce noise from machinery
 Using silencers – fibrous material
 Planting trees
 Legislation can prevent excess sound production, unnecessary horn blowing etc.

f) THERMAL POLLUTION:-
Addition of excess undesirable heat to water
Causes:-
 Nuclear power plant
 Domestic sewage
 Hydro electric power
Effects:-

 Reduction inn dissolved oxygen


 Increase in toxicity
Page 26 of 73
Environmental Science and Engineering

 Direct mortality
Control measures:-

The following methods should be adopted to control thermal pollution


 Cooling towers
 Cooling ponds
 Spray ponds

g) NUCLEAR HAZARDS:- OR RADIO ACTIVE POLLUTION


The physical pollution of air, water and soil by radio materials.
Causes:-
I) Natural causes:
 Solar rays
 Radio nuclides in earth‟s crust
 Environmental radiation
II)Anthrogeneic causes:-
 Medical X-rays
 Radio isotopes
 Nuclear test
 Nuclear installations
 Nuclear reactor
Effects:-
 Causes skin burns, loss of teeth, vomiting anemia
 Blood cancer
 Brain damage
Control measures:-
 Radiation exposure protection
 Radiation contamination protection
 Controlled area
 Disposal of radioactive waste

SOLID WASTE MANAGEMENT:-


Any material that is thrown away or discarded as unwanted is considered as solid waste.

Types:-
 Garbage or food waste
 Rubbish
 Agricultural waste

Page 27 of 73
Environmental Science and Engineering

 Industrial waste
 Hazardous waste
Cause:-
 Over population
 Affluence
 Technology
Effects:-
 Health hazard
 Environmental impact
Control measures:-
Solid waste management include the waste generation
Solid waste generation

Collection of waste

Transportation

Storage
Segregation of waste

Disposal methods

Land fills Incineration Composting

 Collection of solid waste


 Disposal of solid waste

Land fill- Disposal of municipal waste in the upper layers of the earth‟s mantle.

Incineration- Burn highly combustible wastes at very high temperature,


Composting or Bio degradation- Decompose the organic components of the municipal solid
wastes.

Page 28 of 73
Environmental Science and Engineering

 Waste utilization
o Reuse
o Recycling
o Reclamation

Role of an individual in prevention of pollution;-

 Use stairs instead of elevators


 Use public transportation walk or ride a bicycle
 Plant trees around building
 Turn off lights, television sets and computer when not in use.
 Pay immediate attention to leaks in pipes.
 Install waste saving equipments.
 Recycle glass metal and paper.
 Compost garden waste
 Segregate waste and recycle
 Buy locally made long losing material
 Buy environmentally degradable products.
 Take some bag from home to market to purchase.

POLLUTION CASDE STUDIES:-


1. Bhopal gas tragedy:- (Air Pollution)
Pesticide factory-Union Carbide- corporation leak large volume of methyl iso
cyanate –atmosphere Bhopal- India-midnight on December 3,1984-city- change-
gas chamber-within a week 10,000 people died – 1000 people turned blind-lakhs
of people still continue to suffer various diseases
2. Gulf War: (Marine Pollution)
Gulf war was fought between Iraq and US-Period of 6 weeks in 1991-American
fighters dropped a lakh of bombs-force the Iraq army to withdraw from Kuwait-
retreat of Iraq-burning of 700 oil wells-near sea shore –oil from well spills out
into the sea-the floating oil oversea water nearly 80 km long-burning of oil wells
nearly 10 months-released huge amounts of pollutants likeCO2 and SO2 into the
atmosphere-1 million birds killed.
3. Chernobyl Disaster : ( Nuclear pollution)
Occur at Chernobyl in USSR 28 th April,1986-the reactor exploded- result of
uncontrolled nuclear reactions-radioactive fuel spread out in to the surrounding
areas –killed at least 20,000 people-damage to soil, water and vegetation around
60 km.
4. Minamata Disease :( Marine Pollution)
Minamata- Small hostel village in Japan –Chicago-chemical company produces
Venyl polymer plastics-industry release its effluent into Minamata sea-Effluents
Page 29 of 73
Environmental Science and Engineering

containing mercury ions-converted into methyl mercury- highly toxic consumed


by fishes –affect human being through food chain-damage central nervous
system-loss of vision and hearing-loss of muscular coordination and severe
headache- nervous disorders

DISASTER MANAGEMENT;
FLOOD:
Submergence of waste areas of land under water for many days in continuation
Causes: 1.Heavy rainfall
2. Sudden Snow melt
3. Clearing of forest for agriculture
4, Industries increase the value and rate of water discharge after a storm
Effects:
1. Damage to building and property
2. Soil erosion is the major loss of agriculture
3. Any product submerged by flood water cannot be rescued
Control measures:

1. Building wall prevent spilling out the flood water over flood pains
2. advance meteorological information will prevent flood damage
3. reduction of run off by increasing infiltration through appropriate forestation
eg.flood in Bangladesh 1974

EARTHQUAKE:
Earthquake is the motion of the ground surface caused by wave motion starting
from a focal point

Causes:
1. Underground nuclear testing
2. Volcanic eruption
3. Pressure of manmade dams, reservoir and lakes
4. movements of plates of earth
Effects:
1. Cause Tsunami
2. Deformation of ground surface
3. In hilly and mountain areas may cause land slides which damage the settlement
and transport system
4. Depending on the severity of the quake collapses house and people died in 1000
eg. Earthquake in Bhuj town
Page 30 of 73
Environmental Science and Engineering

Control measures:
1. Government can inform the earthquake prone zone and caution residence
2. building should be designed to withstand tremors
CYCLONE:
Cyclone is meteorological phenomena intense depressions forming over the open
oceans and moving towards the land
Effects:
1. Depends on the intensity of the cyclone
2. Damage to human life crops roads, transport, communication could be very heavy
Control measures:
1. planting more trees on hostel areas
2. construction of dams
3. Radar system is used to detect cyclone eg.Cyclone in AP
LANDSLIDES;
The movement of eart materials like coherent rock, mud, soil and debris from
higher region to lower due to gravitational pull is called landslide

Causes:
1. Earthquake, shock, vibration
2. Deep water ground mining
3. movement of heavy vehicles on the unstable sleepy region
Effects:
1. Increase erosion of soil
2. block the roads
3. damage the houses, crop yield, life stock
Control measures:
1. Planting of deep rooted vegetation
2. Encouragement for construction of bridges water ways
3. Create national parks, sanctuaries biosphere.e.g.land slides in U.P

Page 31 of 73
Environmental Science and Engineering

Review questions

1. Give any three methods of air pollution control equipment


 Catalytic converters
 Cyclone collectors
 Electrostatic precipitators
2. What is smog?
It is a mixture of smoke and fog which forms droplets that remain suspended in the air.

3. What is point source of water pollution?


Point source is discharge pollutants at specific locations through pipes, ditches into
bodies of surface waters.
4. When a sound causes noise pollution?
Noise beyond 120 dB
5. What are the types of solid waste?
 Municipal waste
 Industrial waste
 Hazardous waste
What is waste minimization?
Industrial manufacturing system the primary concern should be reducing the quantities of
waste materials produced. This avoids the necessity to threat and disposal off such
materials.

6. Name the chemical constituent of gas that caused death in Bhopal gas tragedy in
India.
Methyl iso cynaide.
7. Define the term Tsunami.
It is a large wave that are generated in a water body where the sea floor deformed by
seismic activity. This activity displaces the overlying water in the ocean

Page 32 of 73
Environmental Science and Engineering

UNIT 3:NATURAL RESOURCES


Any component of the env. Which has intrinsic value of its own is called as resource.
Any component which can be transferred in a way such that it becomes more valuable and useful
is termed as resource.

Resources

Renewable Non renewable Continuous Extrinsic


Eg. Clean air, clean Ground water, Solar energy, wind Human skills
water minerals energy

Considered to be Available only in Considered to be


renewable with finite quantity – available always.
considerable life their rate of renewal
span-as long as they is so slow that they
have the capacity to are considered as
renew – unless they non-renewable
are affected by
catastrophes or
anthrophogenic
activity.

FOREST RESOURCES:
Forests are one of the most important resources of the world. Apart from having high
commercial importance they provide high environmental services also. They act as a blanket on
the surface of the earth.
Around 1/3rd of world land area was found to be forests. 1/5th of world forests were
found in Brazil and 6-7% was in Canada and USA. But the matter under high concern is the
declination of forest cover year by year.
USES OF FOREST:
Commercial uses: Forests provide timber, fire wood, food material, resin, gum, non edible oils,
drugs, medicine, rubber, fibers, bamboo and many other important items.

Ecological uses:
1. Production of Oxygen: Photosynthesis – earth‟s lungs
2. Reducing global warming – sink for carbon di oxide
3. Wild life habitat – 7 million species in tropical forests alone
4. Regulation of hydrological cycle – prevent surface run off – giant sponges – 50-80%
moisture

Page 33 of 73
Environmental Science and Engineering

5. Soil conservation – hold solid particles tightly and prevent soil erosion – wind breaks
6. Pollution moderators: absorb toxic gases and purify air reduce noise pollution

OVER EXPLOITATION OF FORESTS:


Human beings depend heavily on forests for food, shelter, wood, fuel and medicine with
growing civilization etc. shooted up resulting in large scale mining, road building and
clearing of forests.
Excessive use of charcoal, fuel wood, expansion of urban, agricultural and industrial
areas and overgrazing have lead to over exploitation and rapid degradation of forests.

DEFORESTATION:
The total forest area of the world in 1900 was 7000 million hectares -1975 – 2900 mha –
2000 – 2300 mha.
Deforestation rate intemperate countries are relatively moderate. But it is alarming in
tropical countries. It is estimated that in next 60 years we would lose more than 90% of our
tropical forest.

INDIAN STATUS:
Stabilized since 1982, with about 0.04% declaration per year between 1982 - 90. During
this period it is estimated that about 1.44 mha land was brought under afforestation. As per
our NFP, we have a target of achieving 33% forest area. But we still have only 19.27% of
our land area covered by forests(satellite data).

MAJOR CAUSES OF DEFORESTATION:


1. Shifting of Cultivation – 300 million people – 5 lakh hectares of forest for slash and burn
culture
2. fuel requirement
3. raw materials for industrial use
4. developmental projects
5. growing food needs
6. overgrazing
CONSEQUENCES OF DEFORESTATION
1. threatens many wild life species due to destruction of natural habitat
2. biodiversity is lost along with that genetic diversity
3. hilly regions are made prone to landslides
4. soil erosion and loss of soil fertility
5. hydrological cycle is affected
(loss of rainfall, flood, drought etc)

Page 34 of 73
Environmental Science and Engineering

TIMBER EXTRACTION AND MINING:


The major activities in forest area are 1. timber extraction 2. mining
The important effects of timber extraction are
i) thinning of forests
ii) loss of biodiversity, particularly tree breading species
iii) soil erosion and loss of soil fertility
iv) migration of tribal people from one place to another in search of new forest
v) extinction of tribal people and their culture
MINING:
Mining is a process of removing ores from area which is very much below the ground level.
Mining is done for the extraction of several minerals of metals like Fe, Mn, Au, Ag,etc. The
minerals are especially found in thick forests.
Mining can be carried out in two ways
1. Surface mining
2. underground mining or sub-surface mining
The effects of under ground mining on forest reserves is comparatively less than that of surface
mining
Relation between forest and climate change:
Forests both influence and influenced by climate change. They play an important role in the
carbon cycle and the way we manage forests could significantly affect global warming.
Forests hold more than 50 per cent of the carbon that is stored in terrestrial vegetation and soil
organic matter. Hence, deforestation contributes significantly to net emissions of carbon dioxide
into the atm.
If the predicted global warming occurs, the impact on forests is likely to be regionally varied,
dramatic, and long-lasting. Even now, we can see how any extreme weather has great impact on
forests. For example, the 1999 storms in Europe caused heavy damage to forests and also to
trees outside forest areas.
The Kyoto Protocol on climate change may have a great impact on forest management. Under
the Protocol, a country with forests earns emission credits, since its forests absorb carbon
dioxide. These credits are tradable, that is, a developing country can sell its credits to an
industrialized country that has exceeded its quota of emissions. The latter would invest in
afforestation and reforestation projects in the developing country.

Page 35 of 73
Environmental Science and Engineering

DAMS – BENEFITS AND PROBLEMS


River valley projects with big dams are considered to play a key role in the development of a
country. India has large number of river valley projects
1. These dams are regarded as symbol of national development.
2. provides large scale employment of tribal people and increase the std. of living of
them
3. contribute for economic uplift and growth
4. help in checking flood
5. generate electricity
6. reduce power and water shortage
7. provide irrigation water
8. provide drinking water to remote areas
9. promote navigation and fishery.

Environmental problems:
The environmental problems can be at upstream as well as downstream
Level
Upstream problems

1. Displacement of tribal people


2. Loss of flora and fauna
3. siltation and sedimentation near reservoir
4. stagnation and water logging near reservoir
5. growth of aquatic weeds
6. micro climatic changes
7. RIS causes earthquakes
8. breeding of disease vectors

Downstream problems
1. Water logging and salinity due to over irrigation
2. micro climatic changes
3. salt water intrusion at river mouth
4. loss of fertility due to sediment deposits
5. out break of vector born diseases.

Page 36 of 73
Environmental Science and Engineering

WATER RESOURCES
Water is an indispensible resource. Around 97% of world surface is covered with water. Most
of the animals and plants have 60-65% of water in their body.
Unique features of water
1. High specific heat
2. High latent heat of vapourisation
3. Good solvent for oxygen, nutrients and pollutants
4. Anomalous expansion on freezing
5. High surface tension
Global distribution of water is very much random depending on the geographical conditions.
The availability of water decreases in the following order.
1. Tropical rain forest
2. Temperate regions
3. Deserts
Water is used for domestic, irrigation and also industrial purposes
Out of the total available water 75% is used for agriculture, 20% for industrial usage. In our
country ~93% of water is used for agricultural purposes.
Ground water:

9.86% of fresh water is ground water and it is 35-50% greater than surface water.
Aquifer: The layer of soil which is permeable has the ability to store water is called an aquifer. It
is generally made up of gravel, sand etc.
Unconfined aquifer: it is covered by permeable layer. The recharge of this layer is by rainfall or
snowmelt.
Confined aquifer: sandwiched between impermeable layers. The recharge is through unconfined
aquifer layers.
Over utilization of ground water:
Over utilization of water leads to rapid depletion of water resources, ground subsidence,
lowering of water table and water logging.

Effects of over utilization of ground water:


Reasons: Economic development, rapid industrial growth and population explosion
The use of ground water and surface water rates which are higher than that of recharge
ultimately leads to
 Water scarcity
 Water logging
 Salination
 alkalization
Page 37 of 73
Environmental Science and Engineering

 water pollution or contamination

creates declining of water levels


crops failure and reduction in agricultural production
over pumping of ground water create drought, famine and food shortage
over pumping of ground water sea water intrusion in coastal aquifers
land subsidence may due to over pumping of ground water
river pollution due to industrial activities and dumping of waste into rivers, which in
turn force to utilize the ground water, ultimately leads to over pumping
Clean water is universal right. It is the responsibility of everyone to ensure the purity of
water. Water is a valuable commodity and it has to be conserved.
Surface water:
When evaporation and transpiration rates are lower than the rainfall, surface water body like
lake, river, pond, streams etc. are formed.

Flood: over flow of water, whenever the water in flow is greater than the carrying capacity
of the channels flood occurs.
Causes:
1. heavy rainfall, snow melt, sudden release of water from dams.
2. Prolonged down pour leading to overflowing of rivers and lakes
3. Reduction in carrying capacity due to obstructions or sediments etc.
4. Deforestation, overgrazing, mining increases water run off
5. Removal of dense forests from hilly regions
Effects:
1. Submerges the flooded area
2. Loss of soil fertility due to soil erosion
3. Extinction of civilization at costal area

Flood management:
1. Dams and reservoirs can be constructed
2. Embankments and proper channel management
3. Flood way should not be encroached
4. Forecasting or flood warning
5. Decrease of run off by infiltration through afforestation or rain water harvesting etc.

Page 38 of 73
Environmental Science and Engineering

Drought :
Unpredictable delay in climatic condition occurring due to monsoon rain failure.
Types:
Meterological : in order of month or year, actual moisture supply at a given place consistently
falls below critical level.
Hydrological: deficiency in surface and subsurface water supplies
Agricultural: inadequate soil moisture to meet the need of a particular crop at particular time or
susceptibility of crops during different stages in its development

Socioeconomic: reduction in the availability of food and social securing of people


Causes:
 Deforestation and lesser rainfalls coupled with cutting of trees for timber leads to
desertifictation.

 Over drafting of ground water, subsidence of soil, drying of wetlands


 Pollution of soil with solid waste, industrial effluents etc makes land useless and dry
 Population explosion in man and livestock leads to enhanced requirement of timber, fuel
wood, grazing

 Shifting cultivation
Effects:
 Increase of water in stream pond
 Ground water table get declined
 Loss of agricultural crops
 Loss of biodiversity

 Government spent a lot of money as drought relief f und


Control measures
 Rain water harvesting
 Watershed management
 Prevent deforestation
 Encourage afforestation

Page 39 of 73
Environmental Science and Engineering

CONFLICTS OVER WATER


Due to increase in population and decrease in water resources conflicts over water starts
Conflicts over the water around world was classified as
 Control of water resources

 Military food resources


 Political resources
 Terrorism
 Military targets
 Development disputes
Causes:

 Conflicts through use 1. Shipping traffic in international water .2 dam construction


 Construction of power stations on
 Conflicts through pollution-rhine river,Europe
 Distributional conflict-relative storage
 Euphrates, Nile, Ganges - plataneous in upper basin, reduced in lower basin due to
extensive use.
 Anatolian dam project by turkey Farakka dam in India
Distributional conflict: Absolute shortage. Colorada and Rio Grande, Jordan
Conflicts management:
 Enact laws to check practices to control water pollution

 Sharing river solved by interlinking river


 Power must be given to national water authority and river basin authority
and river s-basin authority for equitable distribution of basin water-
demand fo0r nationalization of water needs

Page 40 of 73
Environmental Science and Engineering

MINERAL RESOURCES
 Environmental impacts of over extraction of mineral resources:
 Depending on the conditions of terrain and depth of ore deposits 2 types of mining
operations are carried out. 1. open cast mining and 2. underground mining. In both
types each steps in mining processing produce several environmental effects such as,
 Deforestation takes place due to removal of vegetal covers.
 Great volume of debris has been generated which disrupt the surface and ground water
circulation. It also reduces the water carrying capacity of streams very close to mining
area
 The stacking of over burden and building of soil banks creates problems of landslides
 Under ground fire in coalmines is a hazard that is difficult to control
 Mining and ore processing normally causes air pollution and water pollution
 The acid water generated in coalmines can pose a serious problem of water pollution,
which adversely affects the flora and fauna.
 Deeper excavation of ground causes lowering of water table, which leads to drying of
wells or sea water intrusion
 In stone quarries, blasting of rocks not only annoying the people nearby, but also cause
hazard from fly rocks and dusts and damage to buildings due to vibrations
The disposal of waste material produced after concentrations of ore create increase concentration
of heavy metals and toxic elements in the environment.

FOOD RESOURCES:
PROBLEMS FACED BY FOOD RESOURCES

Overgrazing modern agriculture

Land degradation high yield variety crops

Soil erosion micronutrients imbalance


Loss of useful species nitrate pollution
Eutrophication
Pesticide related problems
Water logging
Salinity

Page 41 of 73
Environmental Science and Engineering

WORLD FOOD PROBLEMS:


 Problems mainly under nutrition and malnutrition
 Natural calamities:-famine, drought, earthquake, flood, gale, storm
 Disease and medical facilities
 Pest damage:-insects, bacteria, viruses, parasites consume 60% of world‟s food
production
 Hunger
 Population explosion in rural areas
 Environmental pollution
 Lack of water for irrigation
 Less rainfall due to deforestation
 Livestock overgrazing
 Overfishing

CHANGES CAUSED BY OVERGRAZING AND AGRICULTURE:


Overgrazing:
Process of eating away the vegetation along with its roots without giving a chance to regenerate
 Land degradation-leads to organically poor, dry, compacted soil cannot be used for
further cultivation
 Soil erosion-cover of vegetation gets removed from soil
 Loss of useful species-good quality grasses and herbs with high nutritive value, when
grazed lose even the root stocks which carry the reserve food for regeneration get
destroyed which gives raise to secondary species like parthenium, Lantane, Xanthium etc
 To prevent –match the forage supplement to the herd‟s requirement.eg.Switch grass
Modern agriculture:
The practice through which specific plant species are cared and managed so as to obtain
maximum yield of consumable parts of plants –agriculture
Makes use of hybrid seeds and selected and single crop variety, high tech equipment and
lots of energy subsides in the form of fertilizers, pesticides and irrigation water e.g. green
revolution
 Damage to soil
 Water contamination
 Water scarcity
 Global climate change
 Water logging-results when soil is over irrigated
 Soil salinity-increase plant productivity, interferes with water uptake by plants
 Fossil fuels and pesticides produce air pollution
Impacts related to high yielding varieties:
 Monoculture ie the same genotype is grown over vast areas. Disease spread easily
 Micronutrient imbalance e.g Zinc deficiency-affect soil productivity

Page 42 of 73
Environmental Science and Engineering

 Nitrate pollution-nitrogenous fertilizers applied deep soil contaminates ground water.


cause blue baby syndrome methaemoglobinemia- affects infants
 Eutrophication: Over nourishment of lakes due to agriculture field wash out-leads to algal
bloom-dead organic matters increases due to decomposition-leads to oxygen demand
Problems associated with pesticide use:
 Evolution of genetic resistance
 Imbalance in ecosystem
 Creation of new pest
 Persistence, Bioaccumulation and Biomagnification
 Mobility through soil, water, air, washed away into rivers, streams, when it rains can
harm fishes
 Creating super pest
 Death of non starget organisms
 Salinity
 Water logging

Water logging / salinisation:


Saturation of soil with irrigation water or excessive precipitation. So that water table rises close
to surface.
Water logging results when soils are over irrigated without drainage. Occurs in clayey soil, soil
root zone becomes saturated with so much water blocking oxygen supply for growth and soil
becomes unsuitable. Carbondioxide and ethylene accumulate around roots and affects plants

ENERGY RESOURCES
Growing energy needs:

Population explosion, Luxurious life, Industries, Agriculture, mining, transportation, lighting,


cooling, heating, building all need energy. Fossil fuels like coal, oil, natural gas produce 95% of
energy
Sources of energy
Primary-
Renewable energy-resources which can be generated continuously in nature and
are in exhaustible and can be used again endlessly.wood, Tidal, Solar, wind,
hydropower, biomass, biofuel, geothermal, hydrogen
Non – renewable energy- Resources which have accumulated in nature over a
long span of time and cannot be quickly replenished when exhausted.coal,
petroleum, natural gas
Secondary-petrol, electrical energy, coal burning

Page 43 of 73
Environmental Science and Engineering

Energy Advantage Disadvantage


renewable
1. Wide availability 1. Unreliable supply
2. Low cost 2. Produced in small
3. Decentralized power quantity
production 3. Difficult to store
4. Low pollution 4. Cost more
5. Available for the
future
Energy non 1. Available in high 1.highly pollution
renewable concentrated form Available only in few places
2. Easy to store High running cost
3. Reliable supply Limited supply and will one
4. Lower cost day get exhausted

Use of alternate energy sources:


Refers to energy sources which are not based on the burning of fossil fuels or the splitting of
atoms.

Solar energy:
Total energy from sun per year-35,000 times the energy used by man
Used to run car, power plants and spaceships
Energy harvesting devises:
Solar heat collectors
Solar cells „
Solar cooker

Solar water heater


Solar furnace
Solar power plants

Wind energy:
Average wind velocity of earth -9 m/sec and power produced when a windmill is facing the
wind od 10 miles/hr-50 watts.eg.largest wind farm-Kanyakumari in tamilnadu is generating 380
MW electricity

Page 44 of 73
Environmental Science and Engineering

Hydro power:
 Comes from damming of rivers and utilization of high pressure, its kinetic energy is
transformed into turbine blades and used to generate electricity
 Minimum water falls height-10 m
 Hydro power potential of India-4x1011KW/Hr

Tidal Energy
Uses the natural motion of tides to fill reservoirs which are then slowly discharged through
electricity producing turbines

Ocean thermal energy


Energy available due to the difference in water temperature. The surface of the tropical ocean
and at deeper level is called OTE. A difference of 200c or more is required for operating OTE
power plants.

Geothermal energy
Energy harassed from the hot rocks inside earth. eg. natural geysers in Manikaran,kully,sohana

Biomass energy
Organic matter produced by plants
Types:
1.Energy plantations:
Solar energy is trapped by green plants through photosynthesis and converted to biomass e.g
Leucaema,Sugarcane, sweet sorghum, Sweetbeet aquatic weeds like hyacinth, Sea
weeds,potato,cereal-energy plantations
Produce energy by burning directly or by getting converted into burnable gas or converted to
fuels by fermentation.
Petro crops
Latex containing plants Euphorbias, oil palms rich in hydrocarbons and yield oil like substance
under high temperature and pressure-refined to form gasoline

LAND RESOURCE
Land is critically important national resource which supports all living organisms including
plants and animals. The soil profile of land determines its ability to serve socio-economic needs.
It has been estimated that more than 5000 million tonnees of top soil is eroded annually
along with 5 million tones of nutrients. „About 1/3 of this is lost in sea while the rest in
reservoirs and rivers leading to flood.

Page 45 of 73
Environmental Science and Engineering

About 38% of the area in India suffers from moderate to high degree of water based
erosion. The per capita availability of land in the country has declined from 1.37 hectare in 1901
to 0.33 hectare in 2000. All these lands cannot be utilized for agricultural purpose. Some land
would be required for other activities (to maintain urban area).

Effective steps have to be taken for preventing diversion of land suitable for sustainable
farming to non-farm uses. Simultaneously, degraded lands and waste lands have to be improved
by ecological restoration. The Department of Land Resources was setup in April 1999 by
ministry of Rural Development to act as nodal agency for land resource management.

Land Degradation:
Land degradation is defined as the reduction in soil capacity to produce in terms of quality,
quantity goods and services. The definition is also based on
1. sustainability or ability to produce continuously and indefinitely.
2. quality of land resource that makes it sustainable or resistant to degradation
3. carrying capacity or the number of people and animals the land can normally support
without significant stress.
Landscapes generally undergo degradation but are usually compensated by nature‟s inherent
recovering ability. Whenever degradation occur exceeding nature‟s restorative capacity, the
result will be a disaster.

Man induced landslides:


The hill slopes are prone to land slides, landslips, rockslides etc. These hazardous features have
reduced the overall progress of the region as they obstruct the roads, communication media and
water flow. There are two types of slides

1. slides due to natural factors


2. slides induced by man and his activities
Some of the human activities that cause land sliding are
 massive deforestation
 erratic agricultural practices
 road building
 Unscientific quarrying etc.
 Engineering. Constructions

Soil erosion:
1. Terracing: Terracing reduces soil erosion on steep slopes by concerting the land into a
series of broad, level terraces. This retains water for crops at each level and reduces soil
erosion by water run off.
2. Contour Farming: This method is adopted for gently sloped land. This involves planting
crops in rows across the contour of gently sloped land.

Page 46 of 73
Environmental Science and Engineering

3. Alley Cropping or Agro forestry: In this method crops are planted together in strips or
alleys between trees and shrubs that can provide fruits and fuel wood. The trees and
shrubs provide shade which reduce water loss by evaporation and preserve soil moisture.
Wind Breaks or Shelter Belts: Wind breaks and shelter belts or trees are established to reduce
wind erosion and also for retaining soil moisture.

ROLE OF INDIVIDUAL IN CONSERVATION OF NATURAL RESOURCES:


Natural resources-forest,water,soil,food,mineral and energy
Overuse of these resources cause problems

Conserve water:
 Don‟t keep water taps running
 Install water saving toilets
 Check forwater leaks
 Reuse soapy water
 Use drip and sprinkling irrigation
 Conserveenergy
 Turn off lights,fan when not in use
 Use solarcooker for cooking
 Try riding bicycle
Protect soil:
 Don‟t uproot plants
 Grow grass which binds soil andprevent erosion
 Make compost
 Use green manure
 Don‟t over irrigate
 Use mixed cropping
EQUITABLE USEOF RESOURCES FOR SUSTAINABLE IFE STYLE:

 Most developed countries like USA, Canada, Japan, Australia have 22% of natural
resources, use 88%.73%of its energy and command 85%of its income
 Less developed countries has 78% of population, 12% Usage of natural resources, 27%
of energy, 15% of income
 Gap arises due to increase in population distribution of resources and wealth
 Problem solved by equitable distribution of resources and wealth
 Global consensus has to be reached for more balanced distribution of basic resources like
safe drinking water, food, fuel etc. So poor low developed countries able to sustain their
life
 Two basic cause of unsustainability are over population in poor countries and over
consumption of resources by rich countries generate wastes
 Rich countries lower down their consumption level
 Poor countries fulfilled by providing them resources

Review questions
Page 47 of 73
Environmental Science and Engineering

1. What is artesian well?


A well or hole in aquifer flows freely at the surface
2. What is wetland?give examples and use
Wetlands are the natural water storage bodies on ground surface

Eg.Swamps, Meadows, Marshes


3. State the major process which have major environmental impact while processing of minerals.
Smelting,chemical extractions
4. What is salinization?
During over irrigation, all the water is not absorbed in the soil. such water evaporates
leaving behind a thin crust of dissolved salts in the top soil.
5. Give two examples of primary and secondary sources of energy?
Primary source-fossil fuels, hydro energy
Secondary source-petrol, electrical energy
6. What is ocean thermal energy conversation?

In oceans, a thermal gradient (i.e., the temperature difference) of about 200C exists
between surface water heated by sun and colder deep water. This difference can be harnessed to
produce power. This concept is OTEC.
7. Give any four environmental benefits of dam
 Source of cleaner and safer power
 For irrigation of agricultural lands
 Helps in recharging of ground water
 Habitat for many fishes and wildlife

8. What are the sources of water


Ground water, surface water, sea water, rain water
9. What is sardar sarovar Narmada project?
It is a multipurpose project on river Narmada, bringing the benefits of irrigation, power
and drinking water to Gujarat, Mathya Pradesh and Rajasthan.
10. What is integrated pest management?
The process of controlling crop pests using ecological system

Page 48 of 73
Environmental Science and Engineering

UNIT 4:SOCIAL ISSUES AND THE ENVIRONMENT


From unsustainable to sustainable development:
Brundland commission describes sustainable development as the development that meet
needs of present generation without compromising ability of future generations to meet their own
need
Concept of sustainable development

 A symbiotic relationship between consumer human race and producer natural system
 Compatibility between ecology and economics

Aim of sustainable development:


 Inter generational equity
 Intra generational technology

Significance of sustainable development:


 Developing appropriate technology
 Reduce , reuse, recycle of natural resources
 Providing environmental education and awareness
 Consumption of renewable resources
 Conservation of nonrenewable resources
 Population control
Urban problems related to energy:
Urbanization:

Movement of human population from rural areas top urban areas for betterment of education,
communication, health, employment etc
Causes;
Cities are main centers of economic growth, trade, transportation, education, medical facilities
and employment
Urban sprawl:
Urban growth is fast , so difficult to accommodate with their limited area .So cities spread into
rural areas
 Urban energy requirement:
 Residential and commercial lighting
 Public and private transportation
 Electrical and electronic appliances

Page 49 of 73
Environmental Science and Engineering

Solution:
Use public transport instead of motor cycles
Energy consumption must be minimized
Use solar and wind energy

Impose strict laws, penalty, and energy audit

Water conservation:
Process of saving water for future utilization
Water source:
 Fresh water
 River
 Stream
 Pond
 Ocean
Need for water conservation:
 Population increases water requirement also increases
 Due to deforestation annual rainfall decreases
 Over exploitation of ground water
Ways of water conservation

 Reducing evaporation loss


 Reducing irrigation loss
 Reuse water
 Avoid sewage discharge
Water conservation method
 Rain water harvesting
 Watershed management
Rain water harvesting
Objective:
To meet increasing demands of water
Raise water table by recharging ground water
Reduce ground water contamination from salt water intrusion

Roof top rainwater harvesting


 Involves collecting water that falls on roof of house
 Rainwater from roof top, road surface, play ground diverted to surface tank
Advantages of rainwater harvesting

Page 50 of 73
Environmental Science and Engineering

 Increases the well water availability


 Raise ground water level
 Minimizes soil erosion
Watershed management:
It is defined as land area bounded by divide line from which water drains under influence of
gravity in to stream, lakes, reservoir.
Eg. Pits, dams, Farm, ponds, Himalaya.
Types

1. Micro
2. Mini
3. Macro
Watershed Management;
The management of rainfall & resultant runoff.
Forestry

Halt deforestation, provide vegetative cover, degraded land and supplement folder and fuel
wood resources available to rural communities
Agriculture
- Aims to increase agricultural productivity in sustained manner and to diversify crop
production
- Major objective shall be achieved through organizing farmers, training camps and
exposure visits.
- Construct check dams, water harvesting tanks, storage tanks and channels , repair of old
channels , implementing measures to check soil erosion
Horticulture

 establishment of private orchard


 Rejuvenation of existing orchards
 Distribution of horticulture plant for home garden planting.
 Animal husbandry
 Energy conservation
 Community participation
 Training and awareness programme
Advantages of Watershed projects
- Improved access to drinking water in project areas during drought
- Increase in cultivation area leading to increase in employment
- Increase in crop yield, resulting better income to rural population
- Improved availability of fodder for animals and increase in milk yield
- Increase in employment & involvement of women
- Increase in net returns from all crops.

Page 51 of 73
Environmental Science and Engineering

- Decrease in soil erosion.


- Restoration of ecological balance.
Resettlement and Rehabilitation of people:
Resettlement – simple relocation or displacement of human population.
Rehabilitation – making, system to work again by allowing, system to function naturally.
Includes replacing the lost economic assets, Safeguard Employment, Provide safe land for
building
Repair damaged infrastructure.

Effects:
 Loss of land
 Loss of recourse
 Unsatisfactory comp[enasation
 Social and cultura problems
 Changes in tradition of indigenous people
 Spread of disease
 Submergence of valuable forest
 Waterlogging
 Extinction of wild life

Environmental ethics:-
Over exploitation of forests, land, water as well as various living components of
biosphere and failure to tackle the problem of pollution and environmental degradation are
exposing the humanly to the thread of a global environment crisis.
It emphasis that real development cannot occur unless the strategies which are formulated
are implemented are environmentally sustainable. Even though our government is
formulating several rules, regulations, policies, laws, it is the duty of each and every one to
protect our nature.
Therefore human beings are ethically responsible for the preservation of the world‟s
ecological integrity. The environment ethics literally means conscious efforts to protect
environment and to maintain its stability from the pollutants. Following are some of the
ways to safeguard environment.
1. To sacrifice the consumption of some of the good which reduces environment quality
2. Minimize the resource utilization and conservation
3. Adopt sustainable and eco friendly development. (e.g) reduction of waste, recycling,
waste management and harvesting non conventional energy
If we change as individuals then the society will also change by itself. The society is
nothing but an extension of the individual.

Page 52 of 73
Environmental Science and Engineering

Green House Effect and Global Warming:


The raise of earth‟s surface temperature due to intense green house effect is called global
warming.
Causes:
Over the last century, the level of carbon dioxide in the atm. Has increase by 25%, the
level of nitrous oxide by 19% and the level of methane by 100%. These 3 major global warming
gases are released into the atm. by burning of fossil fuels, industrialization, mining,
deforestation, exhaust from increasing automobiles and other anthropogenic activities.

Effects:
1. Increase evaporation of surface water – influence climate change
2. Leads to declining biodiversity
3. Melting of mountain glaciers and polar ice, which cause rise in sea level
4. Change the climate and rainfall – reduction in food production
5. The biological productivity of ocean also decreased due to warming of earth‟s surface
6. With more carbon dioxide in the air, the plants will grow bigger with increase in yield
and resulting in the soils getting poor quality
7. If proper precautions are not taken, the conc. Of green house gases may double in the
atom. with in next 50 years, and will makes the average global temp. to 450 C.

Ozone layer depletion:


Ozone is an important chemical species present in the stratosphere. Its conc. is about 10
ppm. It acts as a protective shield for the life on the earth. Ozone is produced and also broken
down by photochemical reactions, thus maintaining equilibrium.
Causes for ozone layer depletion:
1. Chlorine released from CFC and Bromine released from halogens are the most important
chemicals associated with ozone layer depletion
2. The halogens are used in fore extinguishers and CFC are extensively used in air
conditioners and refrigerators.
3. Methyl bromide used during packaging of fruits to prevent bacterial action flows out into
the atmosphere as soon as the packing is opened. This cause heavy damage to ozone.
4. High altitude aircrafts and chemicals emitted by industrial plants and automobiles.

Effects:
1. Marked rise in cause skin cancer
2. Damage immune system
3. Eye ailment such as cataract
4. Shorter life of paints and plastics
5. Restricted growth and crop damage

Page 53 of 73
Environmental Science and Engineering

6. Destruction of aquatic life

Waste land reclamation:


Any land which is not put to optimal use is defined as waste land. The waste land do
not fulfill their life sustain potential wasteland contributes about 20.17% of the total
geographical area of India.
Reasons for formation
 Over grazing and over exploitation
 Toxic effluent discharged from sewage and industrial wastes
 Mining activities destroy forest and cultivable land
 Use of pesticides also produce wasteland
 Erosion, desertification, water logging also degrade land

Wastelands can be reclaimed by the following way


 Conserving the soil – land is brought under vegetal cover. This can be done
by growing grasses and shrubs
 To reclaim the land/soil, effective participation of the people, voluntary
agencies and government is very important

Consumerism and Waste Products


Consumerism refers to the consumption of resources by the people. Early human societies
used to consume much less resources. But the consumerism has increased to a very large extent.
Consumerism is related to both population size and increase in demands due to change in life
style.
Population has increased tremendously. World Bank estimates our population to reach 11
billion by 2045. Two types of conditions of population and consumerism exists.
1. People over – population: When there are more people than available food, water and other
resources in an area – causes degradation of limited resources – poverty and under nourishments.
Low Developed Countries (LDC) are more prone to these conditions. There is less per capita
consumption although the overall consumption is high.
2. Consumption over – population: These conditions occur in more developed countries
(MDC). Population size is smaller but the resource consumption is high due to luxurious life
style (i.e.) per capita consumption is high. More consumption of resources lead to high waste
generation – greater is the degradation of the environment.
According to Paul Ehrlich and John Hodlren model
Overall environmental impact = no. of people x per capita use of resources x waste generated per
unit of resources

Page 54 of 73
Environmental Science and Engineering

Parameter MDC LDC

No. of people low High

Per capita consumption of high Low


resources

Waste generated high Low

Over all environmental impact of these two types of consumerism may be same or even
greater in case of MDC.

Comparison of consumption and waste generation

Parameter Global value %

USA India

Population 4.7 16

Production of goods 21 1

Energy use 25 3

Pollutants and wastes 25 3

CFC Production 22 0.7

Environment (Protection) Act, 1986


CG is to take action to protect and improve environment and SG to co ordinate actions. CG to
set up
1. Std of quality of ]air, water or soil
2. Maximum permissible limits of concentration of pollutants (including noise pollutant)
3. procedures and safe guard for handling hazardous items
4. Prohibition of using hazardous items
5. Prohibition and restriction of certain industries in certain area
6. Procedure and safe guard for prevention of accidents

Environment (Protection) Rules, 1986


SPCB is to follow the guidelines provided in schedule VI. Some are as follows

Page 55 of 73
Environmental Science and Engineering

1. Advises industries for treating the waste water and gases – use of technology – achieve
prescribed std.
2. Encourage recycling and reusing the wastes
3. Encourage recovery of biogas, energy and reusable matter
4. Discharge of effluents and emissions into environment is permitted by SPCB after taking
into account capacity of the receiving water body
5. To emphasize clean technology to increase fuel efficiency and decrease environmental
pollutants
The act provides for environmental Audit for checking complying with the environmental
laws and regulations.

Air (Prevention & Control of Pollution) Act, 1981


Salient features
1. Prevention, control and abatement of air pollution
2. Air pollution has been defined as the presence of any solid, liquid or gaseous substance
(including noise) in the atmosphere in such a concentration that may be or tend to be
harmful to human being or any other living creature or plants or property or environment.
3. Noise pollution – inserted in 1987
4. CPCB & SPCB similar to water pollution board
5. Section 20 provides for emission std to auto mobile
6. Section 19 provides for SG to declare „air pollution control area‟ in consultation with
SPCB
7. Direction of PCB can be appealed in the appellate authority.

Water (prevention and control of pollution) Act 1974:


Maintaining and restoring the wholesomeness of water by preventing and controlling its
pollution. The salient features and provisions of Act are summed as follows.
1. Maintenance and Restoration of Quality – surface and ground water
2. Establishment of central PCB and state PCB
3. Confers powers and functions to CPCB and SPCB
4. The act provides for funds, budgets, accounts and audits of the CPCB & SPCB
5. The act provides penalties for the defaulters and duties and powers

Wildlife [protection] act, 1972:


Land mark in the history of wildlife legislation.
1976 the powers are transferred from state to central government.
[I B of W L] was created in 1952 in our country which after WLA, 1972, took up the task of
setting National parks and sanctuaries.

Page 56 of 73
Environmental Science and Engineering

Wildlife [protection] Act


1 Defines wild life related terminology.
2 Provide appointments of advisory Board, wildlife warden, their powers & duties etc.
3 Prohibition of hunting of endangered species [was first] mentioned.

4 List of endangered species is provided.


5 Guides central 200 authorities.
6 Provides grants for setting up of national parks, wild life sanctuaries etc.
7 The Act imposes ban on trade & commence of scheduled animals.
8 Provides legal proves to officers to punish the offenders.
9 Provide captive breeding programme for endangered species.

Many conservation projects for endangered species were started under this act.
Lion 1972;
Tigers 1973
Crocodile [1974];
Deer 1981.

Forest (conservation) Act, 1980


It deals with conservation of forest and includes reserve forest, protected forest and any forest
land irrespective of ownership.
Salient features
1. State government can use forest only forestry purpose.
2. Provision for conservation of all types of forests. Advisory committee appointed for
funding conservation
3. Illegal non-forest activity within a forest area can be immediately stopped under this act.
Non forest activity means clearing land for cash-crop agriculture, mining etc.

However construction in forest for wild life or forest management is exempted from non
forestry activity.
1992 Amendment:
1. This amendment allows transmission lines, seismic surveys, exploration drilling and
hydro electric project in forest area without cutting trees or with limited cutting of trees –
prior approval CG to be sought.

Page 57 of 73
Environmental Science and Engineering

2. Wild life sanctuaries, National parks etc. are prohibited from exploration except with CG
prior approval.

3. Cultivation of coffee, rubber, tea (cash crop), fruit bearing trees, oil yielding trees, trees of
medicinal values are also prohibited in reserved forest area with out prior approval from CG.
Has this may create imbalance to ecology of the forest.
4. Tusser (a type of silk yielding insect) cultivation in forest area is allowed since it
discourages monoculture practices in forests and improves biodiversity.
5. Plantation of mulberry for rearing silk worm is prohibited.

6. Proposal sent to CG for non-forestry activity must have a cost benefit analysis and
environmental impact statement (EIS).

Environmental Legislation
1972 June 5th – Environment was first discussed as an agenda in UN conference on Human
Environment. There after every year 5th June is celebrated as Environment Day.
Constitutional Provisions:
Added in 1976 – Article 48A – “The state shall endeavor to protect and improve the environment
and to safeguard forests and wildlife of the country”
Article 51A (g): “It shall be the duty of every citizen of India to protect and improve the natural
environment including forests, lakes, rivers and wildlife and to have compassion for living
creatures”.
By these two articles one constitution makes environment protection and conservation as one of
our fundamental duties.

Central and state pollution control Board:


Central pollution control Board (CPCB):
1. Advices CG in matters – prevention and control of water pollution
2. Co ordinates SPCB and provide technical assistance and guidance
3. Training programs for prevention and control of pollution by mass media and other ways
4. Publishes statistical and technical details about pollution
5. Prepares manual for treatment and disposal of sewerage and trade effluents
6. Lays std for water quality parameters
7. plans nation-wide programs for prevention, control or abatement of pollution
8. Laboratories for analysis of water, sewage or trade effluents

State pollution control Board (SPCB):


SPCB has similar functions as SPCB and governed by CPCB

1. SPCB advises state government w.r.t. location of any industry that might pollute

Page 58 of 73
Environmental Science and Engineering

2. Lays std for effluents to take samples from streams, wells or trade effluents or sewage
passing through an industry. Samples taken are analysed at recognized labs. If the
sample is not confirming to the water quality std, then the unit is neglected
3. Every industry to obtain consent from PCB before commencing an effluent unit by
applying in prescribed form with fee.

Enforcement of environmental legislation – major issues


1. Target of 33% of land to be covered by forest not achieved
2. Rivers turning to open sewers
3. Big towns and cities polluted
4. Wild life endangered
5. EFP (Effluent Treatment Plant) or Air Pollution Control devices are expensive – leads to
closure of units. Government should provide subsidy for small units.
6. Pollution control laws not backed up by policy pronouncements or guidelines
7. Chairman of PCB – political nominee. Hence political interference.
8. Involving public in decision making envisaged by policy statement of the ministry of
environment and forest (1992) is only in paper.
Draw backs of wild life (protection) act
 Fall out of Stockholm conference not localized
 Ownership certificate of animals article – illegal trading
 Trade through J & K. This act not applicable to J&K
 Offender to get just 3 years imprisonment and or Rs.25000/- fine.
Draw backs of the forest (conservation) act 1980
 Inheritance of exploitative and consumerist elements of the British period
 Tribal people (i.e.) inhabitants of forest are left by the act
 Instead of attracting public support (tribal) it has intrigued in the human rights.
 Protection of trees, birds and animals have marginalized poor people.

Review Questions
1. Define the term environmental ethics.
Environmental ethics refers to the issues, principals and guidelines relating to human
interactions with their environment

2. What are the effects of global warming?


 Increase the sea level
 Negative effect on crop production and forest growth
 Decrease the water resource
 Increase the drought
3. Explain the factors affecting watershed
Overgrazing, deforestation, mining, construction activities degrades watershed

Page 59 of 73
Environmental Science and Engineering

4. What is meant by Environmental audit?


Environmental audits are indented to quantify environmental performance and
environmental position.
5 Write the consequences of ozone layer depletion.
 Damage genetic materials in the skin cells which cause skin cancer.
 Affect the aquatic forms
 Global warming
 Degradation of paints, plastics
6. What is waste land reclamation?
The restoration of disturbed land to ecologically stable condition.

To make the land more productive for agriculture


7. What are the state enactments of environmental legislations of India
 Smoke control
 Landuse
 Pest control
 Water pollution

Page 60 of 73
Environmental Science and Engineering

UNIT 5: HUMAN POULATION AND THE ENVIRONMENT


Population growth:
Stone age – quite stable
Droughts, outbreak of diseases lead to human deaths. 14th century A.D experienced large scale
mortality due to plague – about 50% of people in Asia and Europe died due to the disease.
Science and technological advancement has increased the expectancy of human. People started
living with good sanitation food and medical facilities increase in population exponentially. In
agriculture based families children are said to be assets who help the parents in fields. Therefore,
in developing countries the population increase is at a rate of 3.4% per year.
Population characteristics and variation among nations:
1. Exponential growth: 1,3,5…… If a quantity varies by a fixed % 10^1, 10^2 etc.
2. Doubling Time Td = 70/r 2%
3. Total Fertility Rate (TFR) is 1.9 developing countries. 4.7 developing countries and 6.1
in 1950
4. Infant mortality: % of infants died out of those born in a year last 50 years.
5. Replacement level: Under low life expectancy and high infant mortality 2.7 in
developing countries and 2 in developed countries.
6. Life expectancy: The average no. of years a new born baby is expected to live.
The life expectancy of global males and females has risen from 40 to 55.5 years. In India
22.6 and 23.3 in 1900 & 60.3 and 60.5 in 2000.

In Japan and Sweden 77-77.4 & 82-84 years.

Population explosion:
Population explosion means the tremendous increase in the number of people. It is a known fact
that the increase of population is playing vital role of all environmental damage. Most of our
natural resources are under threat because of the population growth. If the exploitation of
resource is going on in this trend, the resources will be exhaust shortly. Population explosion
increase disease, economic inequity and environmental abuse. Therefore we need population
stabilization to achieve good health, education and prosperity.

Reason for population explosion:


1. Increase in birth rate in developed countries due to illiteracy
2. Invention of modern medical facilities reduces mortality rate.

Family welfare programme:


 Population explosion must be differenced
 Population is not controlled will deplete all resources
 Family planning

Page 61 of 73
Environmental Science and Engineering

 Allowscouples to describe their family size and also time spacing of their
offspring
 Provide importance, knowledge and benefits of their small family to people
 Education in held and family welfare system
 Sex education awareness
WHO estimated 50% of worlds married couples adopted family planning measures, 300 million
couples not assessed to family planning

Environment and human health:


Environment is defined as man along with his surroundings, which consists of biotic, abiotic and
sociological components. Therefore, when we cause danger to these components, which
surrounds us, they in turn affect our health.
The environmental dangers created by man are many: Population explosion, unregulated
urbanization, creating water, air and landscape pollution, deforestation, desertification, use of
pesticides in agriculture etc. Every one of these has implications for the health of the individual
as well as society as a whole. None can be ignored because the scale of potential calamity is
increasing day by day.

Health hazards may be arising from: water contamination or pollution, air pollution, use of
pesticides enters through food chain, radiation effect of nuclear water, diseases caused from
improper disposal of solid wastes and also due to noise pollution.

Human rights:
1. Human rights means that a human being must enjoy on this earth
2. Foundation of human was laid in 13th century. But positive hopes for all people for a
happy, dignified and secured living condition wee raised only after “Universal
Declaration of Human Rights (UNDHR) by UNO on 1012.1948
3. It highlights on protection to all individuals against injustice and human right violation
4. UNDHR defines specific rights to life, liberty, security, freedom of thought, association,
freedom of movement right of equal pay for equal work, right to form or join union, right
to health care, education etc.
5. Universal declaration rights are universal but disparity between developing and
developed countries.
6. Poverty and population leads to violation of human rights.
WHO estimates

-One out of every five is malnourished, lacks clean drinking water, lacks hygienic
conditions and health facilities.
-one out of 3 lack fuel for cooking
-1/5 is desperately poor
-every year 40 million people die due to contaminated water

7. Acute scarcity of employment

Page 62 of 73
Environmental Science and Engineering

8. Merit of universal education and child labour prevention is of much less importance than
his struggle for existence
9. Developed and developing country give importance only to „respect to human rights‟ and
„non social – economic rights‟ respectively.
Value Education:
Education is one of the most important tools in bringing about socioeconomic and
cultural progress of a country. The objective of education should not be merely coaching the
students to get through the exams with good results and get some good job. Education does not
simply mean acquiring information but using the resources within the limits of ethical value.
The scientific and technological advancements have shrunk the world into a village. But
in the drive to development man has become too materialistic, self centered and over ambitious.
Value based education has a very significant role in providing proper direction to youth to
inculcate positive attitude and to teach them the distinction between right and wrong. It teaches
them to be compassionate, peace loving, helpful, generous and tolerant so that they can move
towards more harmonious, peaceful, enjoyable and sustainable future. Value education help in
arriving value based judgements based on practical understanding of various natural principles.
Value education increases awareness about our national history, our cultural heritage,
national pride, constitutional rights and duties, national integration, aommunity development and
environment.
It is crucial to the retention of national identity, peaceful and harmonious society.
Education should give overall development of the student personality. The main of education is
to produce citizens with sound character and health. Good citizens are the only hope for the
progress and prosperity of the country. Life based upon good principles is an essential requisite.
Therefore moral education should be included in the school curriculum. The curriculum
should provide enough opportunity for pupils to acquire a considerable amount of knowledge
that is essential for morally responsible living in our democratic society.
Value education shall prepare individuals for participation in social life and acceptance of
social rules.
Schools should provide a healthy environment for sharing responsibilities of community
life and relationships.
Value based environmental education:
Environmental education is something that every person should be well versed with. The
principles of ecology and fundamentals of environment help to create a sense of earth citizenship
and a sense of care for the earth and its resources - a sense of commitment towards the
management of the resources in a sustainable way so that our children and grand children too
have a safe and clean planet.

Page 63 of 73
Environmental Science and Engineering

Following the Supreme Court directives 1998 environmental education has been included in the
curriculum right from the school stage to university level. The objective of it is to make
everyone environment literate. Let us see how environmental education can be made value
based one.

1. Preparation of text books materials on environmental education – to built a positive


attitude towards environmental factors.
2. Social values like love, tolerance, compassion can be woven into env. Education. This
will help to nurture all forms of life and biodiversity.
3. Cultural and religious values: Our culture and religions teach us not to exploit nature –
but to perform such functions which project and sacred nature. Therefore these values
can be added up with env. Education.
4. Env. Education should stress on earth centric views rather than human centric view such
that it include the ethical values.
5. Global values: Stress on the concept human is part of nature and all natural processes are
inter linked and they are in harmony. If this harmony is disturbed it may lead to
imbalance in ecology and catastrophic results.
6. Spiritual values: highlights on self contentment, discipline, reduction of wants etc. This
will reduce our consumerist approach
If the mentioned values are incorporated in env. education, the goal of sustainable
development and env. conservation can be easily attained. Value based env. education
can bring about a total transformation of our mind set, our attitudes and life style to
protect nature.

HIV/AIDS
AIDS-Acquired Immuno Deficiency Syndrome

Acquired means disease is not hereditary but develops after birth from contact with a disease
causing agent. Immune deficiency means that the disease is characterized by a weakening of
immune system
HIV-Human immuno deficiency virus cause AIDS disease.virus is passed through iinfected
blood,semen
Transmission of AIDS

 Prostitution
 Homosexual activity
 Use of contaminated syringe in blood transfusion and drug addicts
 Maternal-fetal transmission
Symptoms:
 Persistent fever
 Fatique, weekness
 Diarrhea
 Wait loss
 Low number of T cells in blood
 Swelling lymph nodes, neck
Page 64 of 73
Environmental Science and Engineering

 Susceptible to infections
Treatment:

 AZT-Azidi thymidine
 DDI – Dideoxyinosine
Screening test:
 ELISA-Enzyme Linked Immuno Sorbant Assay
 Western blot
 Polymer chain reaction
 Saliva and urine test
 Branched DNA test
 Immuno fluorescent antibody assay
The major precautions to avoid AIDS
 education
 prevention of blood borne HIV transmission
 primary health care
 counseling services
 drug treatment

Role Of Information Technology In Environment And Human Health:


Computer based instruments for environment studies:
There are several on-line use instruments by which data can be collected automatically at fixed
interval of time.

Eg.
1. Instruments for monitoring and analysis of meteorological parameters, the acoustic
sounding system, radar is used
2. Atomic absorption spectrophotometer (AAS) – performs complex chemical and heavy
metal analysis in water and waste water.
3. Inductive coupled plasma spectrometer (ICPS), attached with powerful computers to
facilitate easy manipulations, is used for waste water analysis.

Application of computers in the field of Environment & human health:


2. Unknown parameters can be stimulated by computer techniques
3. EIA(Environmental Impact Assessment) problems can be analyzed
4. Inventories of emission sources are compiled and maintained
5. Net-work analysis, statistical analysis and the status of environmental pollutions can be
high lighted
6. Comprehensive administrative system can be developed by using computer network
techniques.

Page 65 of 73
Environmental Science and Engineering

Remote sensing-Graphical Interface System are useful for coral reef mapping and ocean
resources. They are also useful to access the loss of biodiversity/hot spots etc.

Review questions:
1. What do you mean by carrying capacity of population?
The maximum popu;lation size that an ecosystem can support under particular
environmental condition

2. What are the reasons for population explosion?


Improved sanitary conditions
Better heath care increase in productivity of agriculture and industry
3. What are the factors influencing human population
Unwanted fertility
To increase the income for family and support

Lack of knowledge on population control methods


4. What is silicosis and asbestosis?
Silicosis is caused due t contamination of free silica
Asbestosis is due to asbestos fibres deposited in lungs
5. List any four vector borne disease
Malaria

Dengue
Filaria
Encephalitis
6. What is ameobiasis?Give its source.
7. This is a water borne disease, caused by amoeba i.e., Entameoba histolytica and
charecterised by liquid stools with mucous and blood
Source; food chain-fruits, vegetables, contaminated drinking water, cold drink
8. What are the two primary strains of HIV
HIV-1 Strain
HIV -2 strain

Page 66 of 73
Environmental Science and Engineering

9. List any two drugs used in treatment of AIDS


AZT-Azidothymidine
DDi-Dideoxyinosine
10. List any two applications of information technology in environment

Data on environmental degradation will help to restore the conditions


Geographic information system by application of information techniology will
help in environmental conservation

FIVE YEARS ANNA UNIVERSITY EXAM QUESTION AND ANSWERS

UNIT 1: ENVIRONMENT, ECOSYSTEM AND BIODIVERSITY


1. Differentiate between a biome and an ecosystem
On earth there are many sets of ecosystems which are exposed to same climatic
conditions and having dominant species with similar lifecycle,Climatic adaptations and
physical structure. This set of Ecosystem is called Biome (Small ecosystem)
A group of Organisms Interacting among themselves and with environment is known as
ecosystem.- is the basic functional unit of Ecology.
2. Define: Food chain and Food Web
In linear food chains, if one species gets affected or becomes extinct, then the species in
the subsequent tropic levels are also affected.

Net work of food chain – Food web – if one species gets affected, it does not affect other
tropic levels so seriously.
3. Differentiate between genetic diversity and species diversity
Genetic diversity – diversity within species ie., variations of genes within the species.

Species diversity - diversity between different species. The sum of varieties of all the living
organisms at the species level is known as species diversity.
4. Define the terms producers and consumers
Producers – depend on their food themselves through Photosynthesis. Eg. All green plants ,
trees.
Consumers. - depend directly or indirectly on the producers eg. Plant eating species, animals
eating species.
5. What are ecological pyramids?

Page 67 of 73
Environmental Science and Engineering

Graphical representation of structural and function of tropic levels of an ecosystem is


called ecological pyramids.

6. Define “Hot spots of biodiversity”


The hot spots are the geographic areas which possess high endemic species.
7. Define biodiversity.
Biodiversity – the variety and variability among all groups of living organisms and the
ecosystem in which they occur.
8. Define ecology.
Ecology – study of interactions among organisms or group of organisms with their
environment (Biotic and Abiotic Organisms)
9. What is ecological succession?
The progressive replacement of one community by another till the development of stable
community in a particular area is called ecological succession.
UNIT 2:ENVIRONMENTAL POLLUTION

1. What is marine pollution?


Marine pollution is defined as the discharge of waste substances in to the resulting in harm
to living resource, hazards to human health, hindrance to fishery and impairment of quality for
use of sea water.
2. Define a) Decibel b) COD
a) Decibel:-Decibel (dB) is defined as the one tenth of the longest unit Bel.

b) COD:-COD (Chemical Oxygen Demand) is the amount oxygen required for chemical
oxidation of organic matter using some oxidizing agent like K2Cr2O7 and KMnO4.

3. What are the effects of noise pollution?


 Interferes with man‟s communication
 Hearing damage
 Physiological and psychological changes
4. How solid wastes are disposed ultimately?
Landfill,incineration,composting

5. What are the causes of water pollution?


 Domestic sewage
 Industrial effluents

Page 68 of 73
Environmental Science and Engineering

 Synthetic detergents
 Agro chemicals
 Oil
 Thermal pollutants
 Run off from land fills

6. What is disaster? Give few examples


Disaster is a geological processes and is defined as the sudden calamity which brings
misfortune and miseries to human community
e.g., flood, cyclone, landslide, earthquake and Tsunami
7. Differentiate between pollution prevention and pollution control

Pollution prevention Pollution control

It means using processes, The proper control


practices, materials, measures practiced to
products or energy that minimize the pollution
avoid or minimize the level.
creation of pollutants and
waste or environmental
disturbances and reduse risk
to human health

8. Differentiate between primary and secondary air pollutants with examples:

Primary pollutants Secondary pollutants

These are emitted directly in the These are pollutants in which


atmosphere in harmful form some of the primary air
pollutants may react with one
Examples:CO,NO,SO2 another to form new pollutants
Examples:
NO,NO2------HNO3/NO3

Page 69 of 73
Environmental Science and Engineering

9. Give any six air pollutants


 Sulphur dioxide
 Nitrogen oxides
 Sulphur trioxide
 Carbon dioxide
 Hydrocarbons
 Carbon monoxide

UNIT:3 NATURAL RESOURCES


1. Distinguish renewable and non-renewable sources of energy

Energy Advantage Disadvantage


renewable

Wide availability Unreliable supply


Low cost Produced in small
Decentralized power quantity
production Difficult to store
Low pollution Cost more
Available for the future
Energy non Available in high highly pollution
renewable concentrated form
Easy to store Available only in few places
Reliable supply High running cost
Lower cost
Limited supply and will one
day get exhausted

2. What is sustainable development?


Sustainable development is defined as meeting the needs of the present without
compromising the ability of future generations to meet their own needs, or extending
progress, without exhausting resources, beyond the foreseeable future.
3. Write any two adverse effects caused by overgrazing.
 Land degradation

 Loss of useful species.


4. What is desertification? Give any two reasons for it.
Desertification means degradation of one fertile land to desert like land.
Reason-deforestation, overgrazing,mining,overgrazing

5. What are the reasons for deforestation?

Page 70 of 73
Environmental Science and Engineering

Deforestation means increasing agricultural production, increasing industrial activity,


increasing demands for wood resources
6. Define Land Degradation.
Land degradation means process of deterioration of soil or loss of fertility of soil.
7. What is an aquifer?
A highly permeable layer of sediment or rock containing water

8. What does strategic metals and minerals mean?


These are the metals and minerals that a country uses but cannot produce itself. essential
for defence. e.g., cobalt,iron,manganese
9. What is water logging and how it is prevented?
Saturation of soil with irrigation water or excessive precipitation so that the water table
rises close to surface.
 Prevent excessive irrigation
 Subsurface drainage and bio drainage by trees like Eucalyptus trees are adopted
 Leakage from water pump are detected
10. Write any two effects of ground water depletion.
 lower the surface water level
 Land subsidence
 Salt water intrusion
 Climate change

11. List any four adverse affects of mining.


 Scarring and disruption of land surface
 Land subsidence
 Smelting causes air pollution
 Acid mine drainage contaminates ground water

UNIT 4:SOCIAL ISSUES AND THE ENVIRONMENT

1. Define watershed management.


The management of rainfall and resultant run off is called watershed management

2. What is green house effect?


Green house effect may be defined as the progressive warming up of the earth‟s
surface due to blanketing effect of man made carbondioxide in the atmosphere
3. What are the advantages of rainwater harvesting?
 Reduction in the use of current for pumping water
 Mitigation by effects of droughts and achieving drought proofing

Page 71 of 73
Environmental Science and Engineering

 Increasing the availability of water from well


 Rise in ground water level
 Minimizing the soil erosion and flood hazards

4. What is acid rain?


The presence of excessive acids in rain water is acid rain.

5. What are the effects of acid rain?


 Acid rain corrodes houses, monuments, statues, bridges and fences.
 Deteriorate the paint and stone

6. What are the objectives of watershed management?


 To minimize the risk of foods, droughts and landslides
 To develop rural areas in the region with clear plan for improving the economy
 To generate huge employment opportunities
 To protect the soil from erosion by run off
 To rise ground water level

UNIT 5 : HUMAN POPULATION AND THE ENVIRONMENT


2. Differentiate between HIV and AIDS.
HIV-Human innuno deficiency virus cause AIDS disease.virus is passed through
iinfected blood,semen.
AIDS-Acquired Immuno Deficiency Syndrome
Acquired means disease is not hereditary but develops after birth from contact with a
disease causing agent. Immune deficiency means that the disease is characterized by a
weakening of immune system
3. What are the major precautions to avoid AIDS?
 education
 prevention of blood borne HIV transmission
 primary health care
 counseling services
 drug treatment

4. Define “Human rights”.


Human rights are the fundamental rights, which are possessed by all human being
irrespective of their caste, nationality, sex and language.
5. What is population explosion?
The enormous increase in population due to low death rate (mortalityt) and high
birth rate (natality), is termed as population explosion.
6. Write any two applications of information technology in environment.
 Land and water management
 Information on type, density, biomass, forest fire, pest and disease.
Page 72 of 73
Environmental Science and Engineering

7. What are the reasons responsible for population explosion?


 Invention of modern medical facilities reduces the death rate and increases the
birth rate.
 Increase of life expectancy
 Illiteracy

8. Write the value of education to the society.


 Improve the integral growth of human being
 create attitude and improvement towards sustainable lifestyle
 to understand about natural environment.

9. What are the major objectives of family welfare programme in India?


 reduce infant mortality rate to below 30/100 infants
 achieves 100% registration of birth, death and marriage
 encourage late marriage and later child birth
 constrain the spread of AIDS/HIV

Page 73 of 73

You might also like