Location:: Combined Large Sump Roof Drain With Secondary Overflow
Location:: Combined Large Sump Roof Drain With Secondary Overflow
Location:: Combined Large Sump Roof Drain With Secondary Overflow
Function: Used in any type of conventional or flat roofs where a safety overflow, which receives water only when the accumulation is greater than
the height of the standpipe, is required to be located beside a standard roof drain. The standpipe can be adjusted to attain the desired overflow
water depth. Large free area domes provide for efficient drainage of rain water and prevents debris from entering the drain line. The underdeck
clamp ring is eliminated with this product because the roof drain bodies are bolted to the underside of the sump receiver and is therefore fixed.
Three pieces of 5/ 16” x 3/4” hardware bolts and washers are provided to secure MIFAB’s A2 bodies to the underside of the R1270-BP.
BODY HEIGHT
PIPE SIZE
NO HUB (STANDARD) PUSH ON (P) THREADED (T) INSIDE CAULK (X) PVC (-30) / ABS (-31)
2” (51) 5 3/4” (146) 5 1/2” (140) 6 1/2" (165) 6 1/2" (165) 6 3/4" (171)
3” (76) 5 3/4” (146) 5 1/2” (140) 6 5/8" (168) 6 1/2" (165) 7 1/2" (191)
4” (102) 5 3/4” (146) 5 1/2” (140) 5 1/2" (140) 6 1/2" (165) 7 5/8" (194)
5” (127) 5 3/4” (146) 5 1/2” (140) 6 5/8" (168) 6 3/4" (171) -
6” (152) 7 1/4” (184) 5 5/8" (143) 5 5/8" (143) 6 1/2" (165) -
8” (203) 5 7/8” (149) N/A N/A (A7-8X body) -
CALIFORNIA PROPOSITION 65 WARNING. This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
MIFAB® reserves the right to make changes in material and design without formal notice and obligation. USA: 1-800-465-2736 www.mifab.com CAN: 1-800-387-3880