Bulletin C316S Bulletin C316S c

Stainless Steel 3-Way and 4-Way Solenoid Valves

C-316 SERIES

Feb 2008 Side Ported Side Ported

The Versa C-316 Series stainless steel body-ported valve is a high flow, 3 or 5-port, solenoid valve. The sealing design is that of Versas proven elastomer packed plunger producing bubble-tight performance along with long trouble-free product life. This seal design also yields the highest flow available in the smallest package. The C-316 Series utilizes stainless steel bodies, actuating caps and internal parts making this series of valves ideal for use in the most aggressive environments. Seals are FKM (fluorocarbon). Solenoid materials are a function of area classification rating. See options for details. The C-316 Series is available as either a 4-way, for double acting devices or a 3-way, for spring return devices. The 3-way function can be specified as either normally closed or opened. All solenoid actuators are solenoid/pilot type, which allows the use of the smallest solenoids available resulting in low power consumption. This design also assures a positive shifting force which makes certain the valve shifts when energized and reduces the chance of coil burnout. Single solenoid spring return models utilize an air assisted spring return feature assuring a positive return. Double solenoid models are equipped with a detent that maintains the valve in the last shifted position, even in high vibration environments. A complete selection of electrical connections, power requirements and area classifications, makes Versa's C-316 the valve of choice for demanding applications. Versas proven and well-accepted solenoid latch option for single solenoid, spring return, 3-way and 4-way valves, is also available on the C-316 Series. With the loss of solenoid signal, the valve shifts closed and cannot be re-shifted until manually reset. Versa's latching solenoid is the benchmark in valve actuator controls.

Flow Rate: Cv = 2.0 (Kv = 29.3) Port Size: Inlet, cylinder and exhaust: NPT Media: Pneumatic only Lubricator not required Expilot Solenoid: Consult Factory

Pressure: 25 to 150 psi (1.8 to 10.3 bar), Single solenoid, spring return 15 to 150 psi (1.0 to 10.3 bar), Double solenoid, detent For applications above 125 psi (8.6 bar), exhaust flow controls or mufflers are recommended. Temperature: -5 to 200 F (-20 to 93 C), Media and ambient (standard) -55 to 200 F (-48 to 93 C), Media and ambient (option -44)

Materials: Valve body and internal parts: Actuator caps: Valve seals: Screws: Solenoid internal parts: Coil/solenoid housing

316L stainless steel 316L stainless steel FKM (fluorocarbon) Stainless steel 304, 430F and 302 stainless steel Per solenoid option selected. See option section.

Versa Products Company, Inc., 22 Spring Valley Rd., Paramus, NJ 0 7 6 5 2 USA Phone (201) 843-2400 Fax (201) 843-2931 Versa BV, Prins Willem Alexanderlaan 1429, 7312 GB Apeldoorn, The Netherlands Phone: +31-55-368-1900 Fax: +31-55-368-1909 e-mail: sales@versa-valves.com www.versa-valves.com

C-316 Stainless Steel Ordering Information

4-Way 5/2 3-Way NC 3/2 3-Way NO 3/2

CSG-3321-316--(coil code)

CGG-3321-316--(coil code)

CAG-3321-316-356BN--(coil code)

CGS-3322-316--(coil code)

CGG-3321-316--(coil code)

CGA-3322-316-356BN--(coil code)

Add suffix option here as required. See coil code below

Dimensions
VALVE TYPE GENERAL SERVICE A 3-Way Single Solenoid, Spring Return 4-Way Single Solenoid, Spring Return 3-Way Double Solenoid, Detented 4-Way Double Solenoid, Detented 3-Way Single Solenoid, Latching*
Inches (mm) Inches (mm) Inches (mm) Inches (mm) Inches (mm)

SOLENOID OPTIONS
HAZARDOUS SERVICE (-XX, -XN) A 5.41 (137.5) 5.91 (150.2) 8.53 (216.8) 9.03 (229.5) 6.51 (165.5) B 1.44 (36.6) 1.44 (36.6) 1.44 (36.6) 1.44 (36.6) 1.44 (36.6) C 2.30 (58.5) 2.30 (58.5) 2.30 (58.5) 2.30 (58.5) 2.34 (59.4) HAZARDOUS SERVICE (-XMA_, -XIF_) A 6.31 (160.3) 6.81 (173.0) 10.33 (262.4) 10.83 (275.0) 7.41 (188.2) B 2.56 (65) 2.56 (65) 2.56 (65) 2.56 (65) 2.56 (65) C 4.13 (104.8) 4.13 (104.8) 4.13 (104.8) 4.13 (104.8) 4.13 (104.8)

B 1.04 (26.4) 1.04 (26.4) 1.04 (26.4) 1.04 (26.4) 1.04 (26.4)

C 2.13 (54.2) 2.13 (54.2) 2.13 (54.2) 2.13 (54.2) 2.34 (59.4)

5.31 (135.0) 5.81 (147.7) 8.33 (211.6) 8.83 (224.3) 6.41 (162.9)

* Add 0.5 (12.7 mm) to A dimension for 4-Way Latch Valve For dimentions XDA_ consult factory

Weights (approximate)
Single Solenoid/Spring Return 3-Way* Double Solenoid/Detented 3-Way* Single Solenoid, Latching, 3-Way* * For 4-way add 0.1 lbs (45 grams)

GENERAL SERVICE 1.30 lbs (590 grams) 1.9 lbs (860 grams) 1.6 lbs (725 grams)

HAZARDOUS SERVICE (-XX, -XN, -XIS_) 1.6 lbs (725 grams) 2.6 lbs (1180 grams) 1.9 lbs (860 grams)

HAZARDOUS SERVICE (-XMA_, -XIF_) 2.5 lbs (1130 grams) 4.3 lbs (1950 grams) 2.8 lbs (1270 grams)

Electrical Options
G E N E R A L General Purpose NPT conduit, NEMA 1,2 & 3* NPT conduit, watertight, NEMA 4 & 4X* Cord grip PG9 mini-DIN type connector, NEMA 4 NPT conduit mini-DIN type connector, NEMA 4 Explosion Proof NPT conduit, NEMA 7 & 9, UL listed, CSA approved* For Low power, add LB with XX For Watertight, add PC with XX For Stainless housing, add ST with XX Flameproof (d) M20x1.5 conduit, II 2 G EEX d IIB + H2 T6 or T4* For Low power, add LB with XN For Watertight add PC with XN For Stainless housing add ST with XN M20x1.5 conduit, II 2 G EEX d IIC T4 or T5 or T6* NPT conduit, II 2 G EEX d IIC T4 or T5 or T6* Encapsulated (m), Increased Safety (e) M20x1.5 conduit, NPT conduit, II 2 G EEX me II T5...T6II 2 G EEX me II T5...T6 Intrinsically safe (ia)** Cord grip PG 9, Class I, II & III, Div 1, Group A thru G, FM/CSA Cord grip PG 9, II 2 G EEX ia IIC T6 M20x1.5 conduit, II 2 G EEX ia IIC T4...T6 NPT conduit, II 2 G EEX ia IIC T4...T6 Manual override, un-guarded push and hold (not available with all solenoid options) Solenoid exhaust adapter, 1/8 NPT For expilot solenoid consult factory

Suffix Detail None -PC -HC -HCC

Solenoid Housing Material Carbon Steel, Painted Carbon Steel, Chromate coated Engineered polymer Engineered polymer

All options available in all voltages, except where noted. Consult factory for other voltages.

Voltages (Coil Codes)

NOMINAL COIL POWER AC/DC (watts) 6.0/7.0 6.0/7.0 6.5/10.5 6.5/10.5

H A Z A R D O U S L O C A T I O N

-XX -LB-XX -PC-XX -ST-XX -XN -LB-XN -PC-XN -ST-XN XDAS XDAT -XMAA -XMAF -XISC -XISX6 -XIFA -XIFF -ME -H2

Carbon Steel, Chromate coated Carbon Steel, Chromate coated Carbon Steel, Chromate coated Stainless Steel Carbon Steel, Chromate coated Carbon Steel, Chromate coated Carbon Steel, Chromate coated Stainless Steel Stainless Steel w/ Junction Box Stainless Steel w/ Junction Box Engineered polymer Engineered polymer Engineered polymer Engineered polymer Engineered polymer Engineered polymer N/A N/A

12VDC (D012) 24VDC (D024) 48VDC (D048) 120V60 (A120) 220V50 (E220)

5.6/7.2 1.8/1.8 5.6/7.2 5.6/7.2 5.6/7.2 1.8/1.8 5.6/7.2 5.6/7.2 10.0/4.0 10.0 10.0/4.0 10.0 na/4.0 na/4.0 na/1.6 na/1.6 na/0.8 na/0.8

110V50 (E110) 240V60 (A240)

NOTES * For high temperature coil add, -HT (included in XMA_, XIF_) ** 24 Volt DC only Contact factory for other options in this series

M I S C

For warranty information and/or any additional information with regards to installation, operation and service warnings, please consult factory.

While due care was exercised in preparing this document, Versa Products Company, Inc. shall not be liable for any inaccuracies or omissions. Specifications Subject to change without notice.

Versa Products Company, Inc., 22 Spring Valley Rd., Paramus, NJ 0 7 6 5 2 USA Phone (201) 843-2400 Fax (201) 843-2931 Versa BV, Prins Willem Alexanderlaan 1429, 7312 GB Apeldoorn, The Netherlands Phone: +31-55-368-1900 Fax: +31-55-368-1909 e-mail: sales@versa-valves.com www.versa-valves.com