5. Stem.

Anti blow out design

1. Design. with precision finishing 7. O-ring. 4. Stem Packing.
Our products meet the grant smooth operation Is a Vimec standard redundant High technology design
international Oil also at high pressure. protection against fugitive grant a tight seal even
Company standard. emission. DOUBLE BLOCK AND BLEED
with gas medium. TWO BALL IN LINE TYPE
Floating and Trunnion Design
Full and Reduced Bore Design
Fire Safe Design
API 6A & API 6D Standards Construction
Lever, Gear or Actuator Operated
Available in any kind of material you require.

8. Locking Pin
System.
Safety device by
means of a non
welded connection
prevents accidental
disassembly.

2. Seat.
Our know-how and our
experience grant the
best performances also 9. Bleed Valve.
at the worse process High pressure needle valve,
conditions. 3. Ball.
metal to metal seat available in High accuracy grade grant
Standard and Bolted Bonnet easy operability and low
Design OS&Y. torque at rated pressure.

6. Anti Static
Device. DOUBLE BLOCK AND
No static electricity can BLEED
Floating and Trunnion Design
Full and Reduced Bore Design
Fire Safe Design
API 6A & API 6D Standards Construction
VIMEC STANDARD DBB VALVE PRODUCTION Lever, Gear or Actuator Operated
Emergency Stem & Seat Sealant Injection
Cryogenic Underground & SUB SEA Application
¥ Floating and Trunnion Design. ¥ NACE compliance. Available in any kind of material you require.
¥ Full and Reduced Bore Design. ¥ Light weight construction. Minimum dimensions.
¥ Fully Tested Fire Safe Design. ¥Available in any material.
¥API 6A & API 6D Construction.
Lever, Gear or Actuator Operated. VIMEC
VIMEC
®
VALVES INSTRUMENTS MANIFOLDS
ENGINEERING CONSTRUCTION
®
VALVES INSTRUMENTS MANIFOLDS 20090 OPERA (Milano) - Via Lambro, 62 - Tel. ++39.02.576.022.97 ++39.02.576.038.99 - Fax ++39.02.576.004.09
ENGINEERING CONSTRUCTION
E-Mail:VIMEC@POINTEST.COM
 SECONDARY ISOLATION BOLTED BON-
NET
THREADED NEEDLE TYPE BALL TYPE
NPT,

NEEDLE TYPE BLEED

PROCESS CONNECTION
SCREWED BONNET

FLANGED
1/2 TO 3
MODULAR TYPE ANSI 150 to

NEEDLE NEEDLE NEEDLE

REDUCED BORE

THREADED
NPT,

INSTRUMENTS CONNEC-

FLANGE to FLANGE FLANGED

DEISGN 1/2 TO 3
ANSI 150 to 2500

INJECTION

SAMPLING
SCREWED BONNET FLANGED to THREA-
PRIMARY ISOLATION VALVE DESIGN DED
BALL TYPE NEEDLE BALL NEEDLE BALL
STRAIGHT
BOLTED BONNET THROUGH
DESIGN
Esecutivo Brochure X8_Trunnion :Esecutivo Brochure_Trunnion 22/04/10 16:29 Pagina 1

Gianluca Ferri Graphic Design

P I P I N G
web site: www.vimecvalves.com

I EU

VIMEC DOUBLE BLOCK & BLEED VALVE

2” ANSI 600 RTJ FULL BORE
ALLOY 625 MATERIAL
SUPPLIED TO AGIP KCO

Kashagan field development pipe line - Kazakistan

Via Lambro, 62 - 20090 OPERA (Milano) - ITALY

Phone No.: +39 02 57602297 +39 02 57603899 - Fax No.: +39 02 57600409
E-Mail: INFO@VIMECVALVES.COM - INFO@VIMECVALVES.IT
Esecutivo Brochure X8_Trunnion :Esecutivo Brochure_Trunnion 22/04/10 16:29 Pagina 3

Quality, technology and reliability in service are mandatory aspects which,

worldwide, a good valve has to guarantee and all our efforts during all these past
years of manufacturing activity have always been implemented to the main goal
of reaching and maintaining the highest quality level which Vimec Trade Mark
represents and will always represent in future for all our
Customers.

The continuous research we develop to the purpose of

better and better meeting with Customers’ requirements and expecta-
tions it taking Vimec, much to our satisfaction, to present this new
line of products, as a completion of our Double Block & Bleed ball
valves range.

Such a new valve is now available in a size range which

goes from 1/2” to 36”, in all pressure class ratings
from 150 Lbs to 2.500 Lbs.

These new valves are regularly manufactured in

Side Entry, Top Entry and Compact design and
are supplied with wrench or gear box operator, as
well as, on specific application, in motorized
execution by means of electric, pneumatic and/or
gas over oil actuators.

The standard production includes ASTM materials like

A105N, F60 and LF6, A350 LF2 for low temperature, A182
F316(L), Duplex F51, Super Duplex F44, F53, F55 as well as a
wide range of special materials like Hastelloy, Inconel 625 or
825, Monel K and Titanium Class 2.
4
9
8
7
6
5
4
3
2
1

11
10

15
14
13
12
No.

STEM
STEM KEY
BODY STUD

STEM O-RING
GLAND PLATE

MOTOR FLANGE
BODY STUD NUTS

GLAND PLATE O-RING

DESCRIPTION

GLAND PLATE GASKET

STEM KEY CAP SCREW

LOWER STEM BUSHING

GLAND PLATE STOP PIN

MOTOR FLANGE BUSHING

GLAND PLATE CAPS SCREW
MOTOR FLANGE CAPS SCREW
16

30
29
28
27
26
25
24
23
22
21
20
19
18
17
Esecutivo Brochure X8_Trunnion :Esecutivo Brochure_Trunnion 22/04/10 16:29 Pagina 5

No.

TRUNNION

VALVE BALL
VALVE BODY
VALVE SEATS
SEAT SPRINGS
CLOSURE O-RING

TRUNNION O-RING

TRUNNION DU DRY
TRUNNION GASKET

TRUNNION BUSHING
VALVE SEATS O-RING
VALVE BODY GASKET
DESCRIPTION

VALVE BODY CLOSURE

VALVE STEM GREASER
TRUNNION CAPS SCREW

CONSTRUCTION DIMENSIONS ACCESSORIES

From 1/2” to 3” for instrumentation application. From 3” to 36” for piping application. Locking Device, Bolted Bonnet Trim Configuration,
Instrumentation and piping applications are available in reduced Anti-Tamper Key, Extended Bonnet (Insulation Device) & Ball Positioner.
or full bore construction.

STANDARD CONSTRUCTION PRESSURE CLASS

All valves are designed and manufactured Starting from 150 Lbs (19,6 Bar) to 2.500 Lbs (425,5 Bar).
in accordance to API 6A, API 6D, ANSI, ASME
and British Standard.

K D
OPERATOR TYPE C MATERIAL AVAILABILITY
All valves could be equipped with wrench or gear box operator, ASTM A.105N, F60, LF6, A.350 LF2, A.182 F316(L),
Electric, Pneumatic, Gas Over Oil Actuator. F44, F51, F53, F55, Hastelloy, Inconel 625 or 825,
E Monel, Titanium Class 2. Other on customer request.

CONSTRUCTION DESIGN CERTIFICATIONS & APPROVALS

Available in Side Entry, Top Entry and Compact Design. Split Body (Modular) ISO 9001:2000, API 6A, API 6D, CE PED, Fire Safe API 607, Fugitive Emission, ISO 15848 Part 1
or One Piece Body (Integral). Flange to Flange or Flange to Thread Design. (Prototype), Low Temperature, MESC SPE 77/300 TAT (Type Acceptance Test).

ANSI 150 ANSI 300 ANSI 600 ANSI 900 - 1.500 ANSI 2.500
DN D E D E D E D E D E
C K C K C K C K C K
Full Red RF RTJ Full Red RF RTJ Full Red RF RTJ Full Red RF RTJ Full Red RF RTJ
3” 76 51 588 598 140 270 76 51 598 608 140 270 76 51 608 611 140 270 76 51 768 771 140 270 63 43 928 934 150 290
4” 102 76636 646 160 300 102 76 642 661 160 300 102 76 696 700 160 300 102 76 836 839 160 300 88 63 998 1.007 191 370
6” 152 102
742 752 182 350 152 102 863 876 182 350 152 102 947 950 182 356 146 102 1.092 1.095 243 485 133 88 1.427 1.440 307 615
8” 203 152
816 826 206 410 203 152 882 895 206 410 203 152 1.078 1.081 235 462 193 146 1.476 1.485 1.515 1.531 357 715
235 462 180 133
10” 984 994 252 485 254
254 203 203 1.057 1.072 252 485 254 203 1.372 1.375 321 625 240 193 1.480 1.490 1.707 1.729 520 1.000
321 625 223 180
12” 303 254 1.137 1.147 336 630 303 254 1.282 1.295 336 630 303 254 1.380 1.383 335 630 289 240 1.735 1.751 381 745 265 223
1.922 1.945 596 1.152
14” 337 303 1.244 1.257 360 670 337 303 1.320 1.336 360 670 337 303 1.447 1.450 365 680 315 289 1.815 1.834 -
490 890 292 265- - -
16” 385 337 1.341 1.357 405 760 385 337 1.474 1.490 405 760 385 337 1.626 1.629 415 780 362 315 1.968 1.991 -
510 930 333 292- - -
18” 436 385 1.508 1.520 440 820 436 385 1.625 1.641 440 840 436 385 1.802 1.805 445 840 406 362 2.247 2.269 597 1.085 374 333 - - - -
20” 487 436 1.700 1.713 475 875 487 436 1.776 1.795 475 895 487 436 1.978 1.984 485 895 454 406 2.450 2.472 655 1.180 419 374 - - - -
24” 589 487 2.006 2.019 585 1.070 589 487 2.082 2.104 585 1.090 589 487 2.336 2.346 597 1.090 546 454 - 2.960 785 1.400 - - - - - -
28” 684 633 2.336 - 620 1.235 684 633 2.436 2.462 640 1.250
684 633 2.639 2.652 640 1.250 641 594 - - - - - - - - - -
30” 735 589 2.448 - 675 1.270 735 589 2.550 2.575 675 1.380 735 589 2.804 2.817 685 1.400 686 546 - - - - - - - - - -
32” 779 735 2.602 - 733 1.440 779 735 2.754 2.783 733 1.470 779 735 2.881 2.897 742 1.470 770 686 - - - - - - - - - -
36” 874 735 2.834 - 797 1.495 874 735 3.037 3.066 797 1.535 874 735 3.393 3.409 805 1.575 855 819 - - - - - - - - - -
5

Showed dimensions are in millimeters. Drawings and dimensions shown in this catalogue are indicative and can be modified without any prior notice.
Esecutivo Brochure X8_Trunnion :Esecutivo Brochure_Trunnion 22/04/10 16:29 Pagina 7

One of the most important aspects connected to VIMEC production

range is the one related to high pressure service valves.

On the other end, present market requests, in line with technical

evolution of End Users production processes, have originated a
mandatory need to apply to this type of Double Block & Bleed
valves, suitable to fully meet with the
very high quality and construction
requirements necessary for heavy duty
and critical services.

Such a kind of valves are of course

manufactured in full compliance with most
important product specifications adopted in
chemical and petrochemical plants, like API 6D, ANSI, ASME,
British Standard etc.

The valves are available in a size range which goes

from 1/2" to 24", in pressure class ratings from 150
Lbs to API 10.000.

These new valves are regularly manufactured in

Side Entry or Top Entry design and are supplied
with wrench or gear box operator as well as, on
specific application, in motorized execution by
means of electric, pneumatic and/or gas over oil
actuators.

The standard production includes ASTM materials like

A105N, F60 and LF6, A350 LF2 for low temperature, A182
F316(L), Duplex F51, Super Duplex F44, F53, F55 as well as a
wide range of special materials like Hastelloy, Inconel 625 or 825,
Monel K and Titanium Class 2.
8
9
8
7
6
5
4
3
2
1

11
10

15
14
13
12
No.

STEM
STEM KEY
BODY STUD

O-RING STEM
GLAND PLATE

MOTOR FLANGE
BODY STUD NUTS

GLAND PLATE O-RING

DESCRIPTION

GLAND PLATE GASKET

STEM KEY CAP SCREW

BUSHING LOWER STEM

GLAND PLATE STOP PIN

MOTOR FLANGE BUSHING

GLAND PLATE CAPS SCREW
MOTOR FLANGE CAPS SCREW
16

30
29
28
27
26
25
24
23
22
21
20
19
18
17
Esecutivo Brochure X8_Trunnion :Esecutivo Brochure_Trunnion 22/04/10 16:29 Pagina 9

No.
TRUNNION TYPE

TRUNNION

VALVE BALL
VALVE BODY
VALVE SEATS
SEAT SPRINGS
CLOSURE O-RING

TRUNNION O-RING

TRUNNION DU DRY
TRUNNION GASKET

TRUNNION BUSHING
VALVE SEATS O-RING
VALVE BODY GASKET
DESCRIPTION

VALVE BODY CLOSURE

VALVE STEM GREASER
TRUNNION CAPS SCREW

CONSTRUCTION DIMENSIONS ACCESSORIES

From 1/2" to 24". Locking Device, Bolted Bonnet Trim Configuration, Anti-Tamper Key, Extended
Schedule 40, 80, 160, XXS for Butt Weld configuration. Bonnet (Insulation Device) & Ball Positioner.

STANDARD CONSTRUCTION PRESSURE CLASS

All valves are designed and manufactured in accordance Starting from 150 Lbs (19,6 Bar) to API 10.000 (690 Bar).
to API 6D, ANSI, ASME and British Standard.

OPERATOR TYPE MATERIAL AVAILABILITY

All valves could be equipped with wrench or gear box operator, ASTM A.105N, F60, LF6, A.350 LF2, A.182 F316(L),
Electric, Pneumatic, Gas Over Oil Actuator. F44, F51, F53, F55, Hastelloy, Inconel 625 or 825,
Monel, Titanium Class 2. Other on customer request.

CONSTRUCTION DESIGN CERTIFICATIONS & APPROVALS

Side Entry. Split Body (Modular). Hub to Hub or Threaded Hubs. ISO 9001:2000, API 6D, CE PED, Fire Safe API 607, Fugitive Emission, Low Temperature.

ANSI 1.500 ANSI 2.500 API 5.000 API 10.000

D D D D
DN A E C K E C K E C K E C K
SCH. SCH. SCH. SCH. SCH. SCH. SCH. SCH. SCH. SCH. SCH. SCH. SCH. SCH. SCH. SCH.
40 80 160 XXS 40 80 160 XXS 40 80 160 XXS 40 80 160 XXS
1/2” 50,80 15 10 10 7 402 74 133 15 10 10 7 510 100 200 15 10 10 7 402 74 133 15 10 10 7 510 100 200
3/4” 50,80 20 15 15 10 406 74 133 20 15 15 10 465 100 200 20 15 15 10 406 74 133 20 15 15 10 465 100 200
1” 50,80 25 20 20 10 410 74 133 20 20 20 10 522 100 200 25 20 20 10 410 74 133 20 20 20 10 522 100 200
1.1/2” 79,37 38 38 25 25 480 84 165 30 30 30 25 620 110 220 45 45 45 45 480 84 165 45 45 45 45 620 110 220
TRUNNION TYPE

2” 92,07 51 38 38 38 618 108 220 38 38 30 30 754 138 249 52 52 45 45 618 108 220 52 52 45 45 754 138 249
2.1/2” 127,00 51 51 51 38 718 140 270 52 52 43 43 920 150 290 65 52 52 52 718 140 270 65 52 52 52 920 150 290
3” 127,00 51 51 51 51 771 140 270 52 52 52 52 934 150 290 65 65 65 52 771 140 270 65 65 65 52 934 150 290
4” 152,40 76 76 76 76 839 160 300 88 63 63 63 1.007 191 370 103 79 79 79 839 160 300 103 79 79 79 1.007 191 370
6” 234,95 102 102 102 102 1.095 182 356 88 88 88 88 1.440 307 615 152 103 103 103 1.095 182 356 152 103 103 103 1.440 307 615
8” 292,10 146 146 146 146 1.485 235 462 133 133 133 133 1.531 357 715 180 180 152 152 1.485 235 462 180 180 152 152 1.531 357 715
10” 346,07 193 193 193 - 1.490 321 625 180 180 180 - 1.729 520 1.000 228 228 180 - 1.490 321 625 Tba Tba Tba - 1.729 520 1.000
12” 406,40 240 240 240 - 1.751 335 630 223 223 223 - 1.945 596 1.152 Tba Tba Tba - 1.751 335 630 Tba Tba Tba - 1.945 596 1.152
14” 495,30 289 289 289 - 1.834 365 680 265 265 265 - - - - - - - - 1.834 365 680 - - - - - - -
16” 552,45 315 315 315 - 1.991 415 780 292 292 292 - - - - - - - - 1.991 415 780 - - - - - - -
622,30 362 362 362 - 2.269 445 840 333 333 333 - - - - - - - - 2.269 445 840 - - - - - - -
5

18”
20” 622,30 406 406 406 - 2.472 485 895 374 374 374 - - - - - - - - 2.472 485 895 - - - - - - -
24” 749,30 454 454 454 - 2.960 597 1.090 - - - - - - - - - - - 2.960 597 1.090 - - - - - - -
9

Showed dimensions are in millimeters. Drawings and dimensions shown in this catalogue are indicative and can be modified without any prior notice.
Esecutivo Brochure X8_Trunnion :Esecutivo Brochure_Trunnion 22/04/10 16:29 Pagina 11

1 2 3 4 5 6 7 8 9 10 11 12 13 14

To-day’s VIMEC’s Cryogenic Valves,

available in all ANSI pressure classes,
are the result of a very long machining,
assembling and test experience which we
have made and improved during our last 30
years of manufacturing activity.

First of all, a particular care is paid to machining A

degree of all valve components where inside

surfaces are in touch with flow so to guarantee
the best contact between metal and non metal
A
seals like lip seals, packing cartridge and seats
area. These operations are exclusively executed on
our working centers, CNC lathes and
rectifying units to obtain a “mirror” finishing degree.

15 16 17 18 19 20 21 22 23 24 25
Another important aspect is
represented by the cleaning of surfaces
which must be free from impurities like dirt, No. DESCRIPTION No. DESCRIPTION
dust, oil or grease traces and all other 1 BODY STUD 14 ANTIFRICTION GASKET STEM
elements which might cause 2 BODY STUD NUTS 15 LOWER CLOSURE GASKET
3 STEM EXTENSION 16 UPPER CLOSURE GASKET
possible leakages. All these 4 UPPER STEM GASKET 17 UPPER ANTISTATIC DEVICE
valves are consequently 5 STEM NUT 18 LOWER ANTISTATIC GASKET
assembled in a segregated 6 GLAND PACKING 19 SEATS
7 STEM 20 REAR SEAT INSERT
area. All Our cryogenic STOP PIN 21 SEAT INSERT
8
valves are subject to 100% 9 LEVER 22 ANTISTATIC DEVICE STEM
leakage test and this indepen- 10 GLAND PACKING NUT 23 VALVE BALL
11 EXTENSION SCREW 24 VALVE BODY CLOSURE
dently from Customer’s requirements. UPPER EXTENSION GASKET
12 25 VALVE BODY
13 LOWER EXTENSION GASKET 26 ANTISTATIC BALL SPRING

11