p128 22 PDF

Page 1 of 3
TI-P128-22
ST Issue 2
STS17.2 Stainless Steel Compact Pipeline Connector Steam Trapping Station

3 Upstream isolation valve
STS17.2 version
with double upstream isolation 3 Upstream isolation valve 3 Downstream isolation valve 1
STS17.2 version
with single upstream isolation 3 Upstream isolation valve Downstream isolation valve 2 2 3 Strainer
16 2
1 2
19 16 2 Strainer
Optional
19
Description
The STS17.2 compact pipeline connector steam trapping station has been designed to provide a convenient ready to install trapping solution, which includes: upstream and downstream isolation valves (2), body incorporating quickfit connector + strainer (1) and check valve (16). Available types The STS17.2 is available with either single or double upstream isolation. The STS17.2 trapping solution incorporates Spirax Sarco quickfit technology, which allows speedy trap maintenance. The following swivel connector steam traps (sold separately) can be used with this pipeline connector enabling it to be tailored to suit any application: - UTD30 and UTD52 thermodynamic steam traps. - UBP32 balanced pressure steam trap. - USM bimetallic steam trap. - UFT32 ball float steam trap. - UIB30 and UIB30H inverted bucket steam traps. Standards These products fully comply with the requirements of the European Pressure Equipment Directive 97/23/EC. Certification These products are available with certification to EN 10204 3.1. Note: All certification/inspection requirements must be stated at the time of order placement. For other certification contact Spirax Sarco.
WLSL1 integral sensor
SSL1 integral sensor
BDV1 blowdown valve
Optional extras
Integral sensor type SSL1 (steam only) or WLSL1 (for waterlogging) for use with R1C or WLSL1 with DIODE for use with RI6C are available as optional extras, to enable operational monitoring of the steam trap. BDV1 blowdown valve is also available for cleaning the strainer during operation. Care should be taken when using the BDV1 blowdown valve as the discharge may be hot. Please note that a BDV1 cannot be used when a Spiratec sensor has been chosen to be part of the unit. Retrofit double isolation valve and spool piece to convert a single upstream isolation version to double isolation. Insulation jacket is available to reduce heat loss and energy wastage. See separate literature.
Materials
No. 1 2 3 16 19 Part Material Body Stainless steel ASTM A351 Gr. CF8 Isolation ball valves Stainless steel ASTM A182 F316L Handle Mild steel ENP coated Check valve Stainless steel ASTM A276 431 Strainer cap Stainless Steel ASTM A582 416
Copyright 2011
Sizes and pipe connections
", " and 1" screwed BSP, NPT or socket weld. ", " and 1" ASME (ANSI) 150 and ASME (ANSI) 300. DN15, DN20 and DN25 flanged EN 1092 PN40.
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice.
Page 2 of 3
Pressure/temperature limits
Temperature C
230 A 200 150 100 50 0 -10
Dimensions /weights (approximate) in mm and kg

D
Steam saturation curve D

0 10 20 Pressure bar g 30
STS17.2 with single upstream isolation
C
40
The product must not be used in this region. A
A - B Flanged ASME Class 300, screwed and socket weld. A - C Flanged EN 1092 PN40. A - D Flanged ASME Class 150. System design conditions PMA Maximum allowable pressure TMA Maximum allowable temperature Minimum allowable temperature PMO Maximum operating pressure for saturated steam service TMO Maximum operating temperature Minimum operating temperature PN40 40 bar g @ 120C 230C @ 10 bar g -10C 17.5 bar g 230C @ 10 bar g -10C B D
STS17.2 with double upstream isolation
Designed for a maximum cold hydraulic test pressure of 60 bar g A
Dimensions /weights (approximate) in mm and kg

Isolation Single Single Single Single Single Single Single Single Single Single Single Single Single Single Double Double Double Double Double Double Double Double Double Double Double Double Double Double Size and connection " BSP, " NPT and " SW " BSP and " NPT " SW 1" BSP and 1" NPT 1" SW " ASME (ANSI) 150 " ASME (ANSI) 300 DN15 EN 1092 PN40 " ASME (ANSI) 150 " ASME (ANSI) 300 DN20 EN 1092 PN40 1" ASME (ANSI) 150 1" ASME (ANSI) 300 DN25 EN 1092 PN40 " BSP, " NPT and " SW " BSP and " NPT " SW 1" BSP and 1" NPT 1" SW " ASME (ANSI) 150 " ASME (ANSI) 300 DN15 EN 1092 PN40 " ASME (ANSI) 150 " ASME (ANSI) 300 DN20 EN 1092 PN40 1" ASME (ANSI) 150 1" ASME (ANSI) 300 DN25 EN 1092 PN40 A 222 222 213 229 269 268 294 284 272 306 304 271 309 304 350 350 341 357 397 396 422 412 400 434 432 399 437 432 Dimension mm B C 76 76 76 76 76 76 76 76 76 76 76 76 76 76 76 76 76 76 76 76 76 76 76 76 76 76 76 76 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 D 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 Weight kg 3.60 3.53 3.54 3.71 3.86 4.45 4.98 5.12 4.67 5.98 5.74 4.96 6.64 6.24 5.32 5.25 5.26 5.43 5.58 6.17 6.70 6.84 6.39 7.70 7.46 6.68 8.36 7.97
TI-P128-22 ST Issue 2
Page 3 of 3
Spare parts
The spare parts are available as indicated below. No other parts are supplied as spares. Available spares Isolation ball valve seat and stem seals Strainer screen and gasket SSL1 Spiratec sensor Spare sensor and sensor gasket WLSL1 diode waterlogging sensor Spiratec retrofit kit Note: State whether an SSL1 or WLSL1 sensor is required. Check valve assembly Double isolation conversion kit (includes spool piece and additional isolation valve) BDV1 blowdown valve retrofit kit 8, 9 21, 22 23 24 20, 21 + 23 or 24 17, 18 X 20, 21 + 25
How to order spares Always order spares using the description given in the column headed 'Available spares' and state the size and model number. Example: 1 off Spare Spiratec sensor and sensor gasket with WLSL1 diode waterlogging sensor for a " STS17.2 compact pipeline connector steam trapping station.
18 17
8 9
X is a double isolation conversion kit
22 21
20 20 20 25
23 24 SSL1 integral sensor WLSL1 integral sensor
BDV1 blowdown valve
Safety information, installation and maintenance How to order
For full details see the Installation and Maintenance Instructions (IM-P128-23) supplied with the product. Example: 1 off Spirax Sarco " screwed BSP STS17.2 stainless steel pipeline compact connector steam trapping station, having a Spiratec SSL1 sensor.
TI-P128-22 ST Issue 2

p128 22 PDF

Uploaded by

Copyright:

Available Formats

p128 22 PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

p128 22 PDF

Uploaded by

Copyright:

Available Formats

Page 1 of 3

STS17.2 Stainless Steel Compact Pipeline Connector Steam Trapping Station

WLSL1 integral sensor

SSL1 integral sensor

BDV1 blowdown valve

Sizes and pipe connections

Dimensions /weights (approximate) in mm and kg

Steam saturation curve D

STS17.2 with single upstream isolation

The product must not be used in this region. A

STS17.2 with double upstream isolation

Designed for a maximum cold hydraulic test pressure of 60 bar g A

Dimensions /weights (approximate) in mm and kg

STS17.2 Stainless Steel Compact Pipeline Connector Steam Trapping Station

X is a double isolation conversion kit

23 24 SSL1 integral sensor WLSL1 integral sensor

BDV1 blowdown valve

Safety information, installation and maintenance How to order

STS17.2 Stainless Steel Compact Pipeline Connector Steam Trapping Station

You might also like