A

D I V I S I O N

O F

M A R S H

B E L LO F R AM

D IVISION

OF

MARSH

BELLO F R AM

BelGAS Standard Needle Valves offer four choices in 316 stainless steel as well as one piece forged carbon plated steel; soft seat and hard seat, angle and globe styles. The Mini valve offers 2 choices in 316 stainless steel and bar stock plated carbon steel; soft seat and hard seat globe style, T-bar and thumb wheel operation. These valves are suited for instrumentation, process plant use, oil and gas production and general applications where isolation and positive shutoff is a requirement. For applications requiring a positive shutoff, the soft seat style with Delrin seat insert offers a bubble tight seat for leak free operation. For corrosives and caustic applications, the hard seat style offers a metal to metal sealing force to clear obstructions and corrosion. All valves are deigned to the following standards; ANSI B31.1.0 Power Piping ANSI B1 1.20 Fuel Gas Piping ANSI B31.3 Chemical Plant Petroleum Refinery Piping ASME Section VII-DIV1 Boiler & Pressure Vessel Code Thread & Dimensional codes include; ANSI B2.1 Pipe Threads ANSI B1.1 Straight Threads ASME B16.10

BelGAS Metal-to-Metal Seat Needle Valves

316 Stainless Steel and Alloy Steel
These 316 Stainless steel valves are ideally suited for applications when caustic and corrosive material are being used. Pressure ratings to 10,000 psi (70,000 kPa). T bar handle Teflon* packing Roll-formed stem threads Precision-machined stem Bonnet locking pin prevents accidental removal Below stem thread packing gland Hardened and ground self centering, non-rotating tip Metal-to-metal seat Pressure rating, 10,000 psi (70,000 kPa)

Specifications and Description

Body and Bonnet Material ASTM A182F 316 stainless steel or ASTM A105 forged single piece steel, plated. Stem Material 316 stainless steel. Pressure/Temperature Rating 10,000 psi (70,000 kPa) @ 200F [93C] 4000 psi (28,000 kPa) @ 500F [260C] Optional Graphite Packing (HT) 10,000 psi (70,000 kPa) @ 400F 204C] Alloy steel 1500 psi (10,400 kPa) @ 850F [460C] 316 stainless steel 1500 psi (10,400 kPa) @ 1000F [538C] Packing Two piece molded Teflon* (PTFE). Seat Metal-to-metal.
A D I V I S I O N O F M A R S H B E LLO F R AM

Part Number Pattern Size NPT 316 SST Carbon Cv

Handle T bar; 316 stainless steel or ASTM A108 alloy steel Connection National Pipe Thread, meeting specifications of ANSI B2.1. Finish Stainless steel is passivated. Alloy steel has a clear zinc dichromate finish. Stem Retaining Method All valves feature integral backseated stem for preventing accidental removal. Assembly Bonnet is threaded into body and pinned into place.
* **

1/8" 1/4" FFG 3/8" 1/2" 3/4" 1" 1/4" MFG 1/2" 3/4" 1/8" 1/4" FFA 3/8" 1/2" 3/4" 1" MFA 1/4" 1/2"

VHS-FFG-18 VHS-FFG-14 VHS-FFG-38 VHS-FFG-12 VHS-FFG-34 VHS-FFG-01 VHS-MFG-14 VHS-MFG-12 VHS-MFG-34 VHS-FFA-18 VHS-FFA-14 VHS-FFA-38 VHS-FFA-12 VHS-FFA-34 VHS-FFA-01 VHS-MFA-14 VHS-MFA-12

VHC-FFG-18 VHC-FFG-14 VHC-FFG-38 VHC-FFG-12 VHC-FFG-34 VHC-FFG-01 VHC-MFG-14 VHC-MFG-12 VHC-MFG-34 VHC-FFA-18 VHC-FFA-14 VHC-FFA-38 VHC-FFA-12 VHC-FFA-34 VHC-FFA-01 VHC-MFA-14 VHC-MFA-12

0.40 0.40 0.90 1.10 2.30 3.50 0.40 1.20 2.30 1.90 0.70 0.80 1.60 2.20 2.20 2.20 0.60 1.50

3/4" x 1/2" VHS-MFG-3412 VHC-MFG-3412

Teflon is a registered trademark of DuPont. NACE valves are manufactured of 316 SS.

Option

Suffix

Graphite Packing - High Temp. NACE** Panel Mount

H N P

BelGAS Soft-Seat Needle Valves

316 Stainless Steel and Alloy Steel
For applications where bubble-tight shutoff of liquids or gases are required. Pressure rating to 6,000 psi (42,000 kPa). These valves are designed with a replaceable Delrin** soft seat. T bar handle Teflon* packing Roll-formed stem threads Precision-machined stem Bonnet locking pin prevents accidental removal Below stem thread packing gland Hardened and ground self-centering, non-rotating tip Soft-seat Bubble-tight shutoff of liquids or gases to 6,000 psi (42,000 kPa)

Specifications and Description

Body and Bonnet Material ASTM A182F 316 stainless steel or ASTM A105 forged single piece steel, plated. Stem Material 316 stainless steel Pressure/Temperature Rating 6000 psi (42,000 kPa) @ 200F [93C] 4000 psi (28,000 kPa) @ 500F [260C] Optional Graphite Packing (HT) 6000 psi (42,000 kPa) @ 400F [204C] Alloy steel 1500 psi (10,400 kPa) @ 850F [460C] 316 stainless steel 1500 psi (10,400 kPa) @ 1000F [538C] Packing Two piece molded Teflon* (PTFE). Seat Delrin** Soft-Seat.
A D I V I S I O N O F M A R S H B E L LO F R AM

Handle T bar; 316 stainless steel or ASTM A108 alloy steel Connection National Pipe Thread, meeting specifications of ANSI B2.1. Finish Stainless steel is passivated. Alloy steel has a clear zinc dichromate finish. Stem Retaining Method All valves feature integral backseated stem for preventing accidental removal. Assembly Bonnet is threaded into body and pinned into place.
* ** ***

Pattern

Size NPT

Part Number 316 SST Carbon

Cv

1/4" FFG 1/2" 3/4" 1" 1/4" MFG 1/2" 1/4" x 1/2" MFA 1/4" 1/2"

VSS-FFG-14 VSS-FFG-12 VSS-FFG-34 VSS-FFG-01 VSS-MFG-14 VSS-MFG-12

VSC-FFG-14 VSC-FFG-12 VSC-FFG-34 VSC-FFG-01 VSC-MFG-14 VSC-MFG-12 VSC-MFA-14 VSC-MFA-12

0.60 0.70 2.35 2.00 0.60 0.70 0.80 0.70 0.70

VSS-MFG-1412 VSC-MFG-1412

Option

Suffix

Graphite Packing - High Temp. NACE

***

H N P

Panel Mount

Teflon is a registered trademark of DuPont. Delrin is a registered trademark of DuPont. NACE valves are manufactured of 316 SS.

Patterns and Dimensions

Metal-to-Metal - 316 Stainless Steel or Alloy
FFG and MFG Double Female and Male/Female Globe Pattern
Dimension Nominal Sizes (inches [mm]) 1/8" 1/4" 3/8" 1/2" 3/4" 1"

DIVISION

OF

MARSH

BELLO F R AM

A MAX OPEN HEIGHT MFG E FFG B CF CM

A B CF CM E Orifice

3.39 [86.0] 2.36 [60.0] 1.12 [28.5] 0.17 [4.2]

3.39 [86.0] 1.18 [30.0] 2.36 [60.0] 2.99 [76.0] 1.12 [28.5] 0.17 [4.2]

3.46 [88.0] 2.68 [68.0] 1.26 [32.0] 0.25 [6.4]

3.62 [92.0] 1.26 [32.0] 2.68 [68.0] 3.50 [89.0] 1.50 [38.0] 0.28 [7.0]

3.66 [93.0] 1.26 [32.0] 2.68 [68.0] 3.50 [89.0] 1.57 [40.0] 0.35 [9.0]

4.41 [1 12.0] 1.69 [43.0] 3.1 [80.0] 5 4.13 [105.0] 1.77 [45.0] 0.47 [12.0]

FFA and MFA Double Female and Male/Female Angle Pattern

Dimension Nominal Sizes (inches [mm]) 1/8" 1/4" 3/8" 1/2" 3/4" 1"

A MAX OPEN HEIGHT

A C E F Orifice

3.39 [86.0] 1.65 [42.0] 1.10 [28.0] 1.65 [42.0] 0.17 [4.2]

3.39 [86.0] 1.65 [42.0] 1.10 [28.0] 1.65 [42.0] 0.17 [4.2]

3.39 [86.0] 1.65 [42.0] 1.10 [28.0] 1.65 [42.0] 0.25 [6.4]

3.62 [92.0] 1.97 [50.0] 1.26 [32.0] 1.97 [50.0] 0.28 [7.0]

3.62 [92.0] 1.97 [50.0] 1.42 [36.0] 1.97 [50.0] 0.35 [9.0]

4.41 [1 12.0] 2.36 [60.0] 1.81 [46.0] 2.36 [60.0] 0.47 [12.0]
MFA E C FFA F

Soft-Seat - 316 Stainless Steel or Alloy

FFG and MFG Double Female and Male/Female Globe Pattern
Dimension Nominal Sizes (inches [mm]) 1/4" 1/2" 1/4" x 1/2" 1"

A MAX OPEN HEIGHT MFG E FFG CF CM B

A B CF CM E Orifice

3.39 [86.0] 1.18 [30.0] 2.36 [60.0] 2.99 [76.0] 1.12 [28.5] 0.17 [4.2]

3.62 [92.0] 1.26 [32.0] 2.68 [68.0] 3.50 [89.0] 1.26 [32.0] 0.28 [7.0]

3.62 [92.0]

4.41 [1 12.0] 1.26 [32.0] 3.1 [80.0] 5

3.50 [89.0] 1.50 [38.0] 0.28 [7.0] 1.77 [45.0] 0.47 [12.0]

MFA Male/Female Angle Pattern

Dimension Nominal Sizes (inches [mm]) 1/4" 1/2"

A MAX OPEN HEIGHT

A C E F Orifice

3.39 [86.0] 1.65 [42.0] 1.10 [28.0] 1.65 [42.0] 0.17 [4.2]

3.62 [92.0] 1.97 [50.0] 1.26 [32.0] 1.97 [50.0] 0.28 [7.0]
MFA C F E

BelGAS Block/Bleed Terminal Needle Valves 316 Stainless Steel and Alloy Steel
T bar handle Teflon* packing Roll-formed stem threads Precision-machined stem

Ideally used to isolate gauge legs and gauge reading, allow sampling to take place without loss of material and provide extra pressure ports with isolation capabilities and can be used only when needed.

Below stem thread packing gland Hardened and ground 316 stainless steel, self-centering, non-rotating tip Carbon steel or 316 SST port plug Pressure rating, 10,000 psi (70,000 kPa)

Specifications and Description

Body and Bonnet Material ASTM A182F 316 stainless steel or ASTM A105 forged single piece steal, plated Stem Material 316 stainless steel Pressure/Temperature Rating 10,000 psi (70,000 kPa) @ 100F [38C] 4000 psi (28,000 kPa) @ 500F [260C] Optional Graphite Packing (HT) 10,000 psi (70,000 kPa) @ 400F [204C] Alloy steel 1500 psi (10,400 kPa) @ 850F [460C] 316 stainless steel 1500 psi (10,400 kPa) @ 1000F [538C] Packing Two piece molded Teflon* (PTFE). Seat Metal-to-metal.
A D I V I S I O N O F M A R S H B E L LO F R AM

Handle T bar; 316 stainless steel or ASTM A108 alloy steel Connection National Pipe Thread, meeting specifications of ANSI B2.1. Finish Stainless steel is passivated. Alloy steel has a clear zinc dichromate finish. Stem Retaining Method All valves feature integral backseated stem for preventing accidental removal. Assembly Bonnet is threaded into body and pinned into place.
*

Pattern

Size NPT

Part Number 316 SST Carbon

Cv

Block/ Bleed

1/2" x 1/2" 3/4" x 1/2"

BHC-MFG-12

BHS-MFG-12

0.40

BHC-MFG-3412 BHS-MFG-3412 0.40

Suffix

Option

Graphite Packing - High Temp.

1/2" NPT OR 3/4" NPT

A MAX OPEN HEIGHT 1/2" NPT BOTH SIDES

1/2" NPT

Teflon is a registered trademark of DuPont. Dimension

Nominal Size (inches [mm]) 1/2" 3/4" x 1/2"

A B C Orifice

3.54 [90.0] 1.50 [38.0] 3.74 [95.0] 0.28 [7.0]

3.54 [90.0] 1.50 [38.0] 3.74 [95.0] 0.28 [7.0]

BelGAS Miniature Needle Valves

316 Stainless Steel and Alloy Steel
Miniature size for applications where space is limited. Ideal for test stand and general equipment. T bar handle or thumb wheel Roll-formed stem threads. Precision-machined stem. Teflon* packing Bonnet locking pin prevents accidental removal Metal-to-metal and soft seat Pressure rating, 6,000 psi (42,000 kPa)

Specifications and Description

Body and Bonnet Material ASTM A479 316 stainless steel or ASTM A108 barstock steel, plated Stem Material 316 stainless steel Bonnet Cap (Protective Cover) Low density polyethylene, red. Pressure/Temperature Rating 6000 psi (42,000 kPa) @ 100F [38C] 4000 psi (28,000 kPa) @ 500F [260C] Packing Molded Teflon* (PTFE). Seat Metal-to-metal and Delrin** Soft-Seat. Handle T bar; 316 stainless steel / ASTM A108 alloy steel / aluminum anodized thumb wheel. Connection National Pipe Thread, meeting specifications of ANSI B2.1. Finish Stainless steel is passivated. Alloy steel has a clear zinc dichromate finish. Stem Retaining Method All valves feature integral backseated stem for preventing accidental removal. Assembly Bonnet is threaded into body and pinned into place.
* **

Pattern

Size NPT

Part Number 316 SST Carbon

Seat

Cv

FFG

MFG

1/8" 1/8" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

MHS-FFG-18 MHS-FFG-18W MHS-FFG-14 MHS-FFG-14W MHS-MFG-14 MHS-MFG-14W MSS-MFG-14 MSS-MFG-14W

MHC-FFG-18 MHC-FFG-18W MHC-FFG-14 MHC-FFG-14W MHC-MFG-14 MHC-MFG-14W MSC-MFG-14 MSC-MFG-14W

Hard Hard Hard Hard Hard Hard Soft Soft

0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25

Standard is T-bar 'W' is thumb wheel

A MAX OPEN HEIGHT MFG

B

Teflon is a registered trademark of DuPont. Delrin is a registered trademark of DuPont.

FFG C
Dimension Nominal Size (inches [mm]) 1/8" 1/4"

A B C Orifice
A D I V I S I O N O F M A R S H B E L LO F R AM

2.44 [62.0] 0.87 [22.0] 1.89 [48.0] 0.13 [3.2]

2.44 [62.0] 0.87 [22.0] 1.89 [48.0] 0.13 [3.2]

D I V I S I O N

O F

M A R S H

B E L LO F R AM

Needle Valve Part Number Matrix

V S C F F G 18 W

Flow Coefficient (Cv)

Method of Calculating Flow: The flow coefficient Cv of a valve is the flow rate of water (gallons/ minute) through a fully opened valve, with a pressure drop of 1 psi across the valve. To find the flow of liquid through a valve from the flow coefficient (Cv), use the following formula: P G

Sample Part Number

Valve Type
V M B

Standard Mini Block/Bleed Seat Design

S H

Soft Seat Hard Seat Body Material

C S

Carbon Steel 316 SS Inlet Connection

F M

To find the flow of gas through a valve, use the following formula: P g
For noncritical flow

Female Male Outlet Connection

F M

less than 1.0

Female Male Body Pattern

G A

Globe Pattern Angle Pattern Connection Size

18 14 38 12 34 01

1/8" NPT 1/4" NPT 3/8" NPT 1/2" NPT 3/4" NPT 1" NPT Options
H N P W V

IMPORTANT: Flow coefficients are dependent on both the size of the valve and the valve pattern itself. Marsh Cv factors give flow information for all sizes and patterns so that the designer is able to provide sufficient flow within the system.

Graphite Packing - High Temp. NACE Panel Mount Hand Wheel (Mini only) Viton O-ring, Soft seat Only

DIVISION

OF

MARSH

BELLO F R AM

8010 Ohio River Blvd., Newell, WV 26050 800-727-5646 Fax 304-387-4417

LT0389 PDF 6-08

www.marshbellofram.com