DSEControl®

DSEM840
PROGRAMMABLE DISPLAY FOR USE IN
VEHICLES AND OFF-HIGHWAY MACHINERY

OVERVIEW

DC SUPPLY
8 V DC to 32 V DC

CURRENT CONSUMPTION
OPERATING CURRENT
< 1000 mA at 12 V and 24 V without
external loads

DISPLAY
480 px x 272 px
24 bit colour
Optically bonded

INPUTS/OUTPUTS (total)
4 inputs / 4 outputs

INPUTS
Configurable,
Digital inputs (positive / negative)
Analogue inputs (Voltage 0 V to 5 V, 0 V to
10 V, 0 V to 32 V, current 4 mA to 20 mA,
Ratiometric, Resistive, Frequency)

OUTPUTS
Configurable
Digital Output High-Sided/Low-Sided
KEY FEATURES / SUMMARY INTERFACES
• Robust HMI/programmable display specifically designed for mobile applications CAN 1.2
CAN Interfaces 2.0 A/B, ISO11898
• Optically bonded 4.3” colour screen for harsh environments 50 kbits/s... 1 Mbit/s
• Powerful Cortex M4 + M processor with 200 MHz clock speed CAN Open, SAE J1939 or Raw CAN
ETHERNET
• 32 MB of SDRAM and 16 MB of flash storage 10 Mbit/s / 100 Mbit/s, Duplex

• 4 configurable inputs, digital and analogue capability USB

• 4 configurable digital outputs USB Host 2.0 (12 Mbit/s)

• 2 independent CAN interfaces, J1939, CAN open and Raw CAN DIMENSIONS
131 mm x 208 mm x 56 mm (H x W x D)
• Ethernet interface for communication 5.15” x 8.2” x 2.2” ( H x W x D)
• Flexible user programming via CODESYS 3.5 and C WEIGHT
• IP67 protection/NEMA 6 < 1 kg

STORAGE TEMPERATURE RANGE

-40 ˚ C to +80 ˚ C
-40 ˚ F to +176 ˚ F

ADDITIONAL HARDWARE DSE PART OPERATING TEMPERATURE RANGE

-30 ˚ C to +65 ˚ C
Deutsch connector A, 18 way complete with pins 007-850 -22 ˚ F to +185 ˚ F
M840 connector harness 016-168 PROTECTION RATING
M840 panel gasket 020-602 IP67/NEMA 6 (with mating connectors)

Ethernet programming cable 016-160 MOUNTING

M12 to USB cable 016-161 4 x M5 bolts / RAM arm

RELATED MATERIALS
TITLE PART NO.
M840 Installation Instructions 053-188
M840 Operators Manual 057-248

DEEP SEA ELECTRONICS PLC UK DEEP SEA ELECTRONICS INC USA

Highfield House, Hunmanby Industrial Estate, Hunmanby YO14 0PH 3230 Williams Avenue, Rockford, IL 61101-2668 USA
TELEPHONE +44 (0) 1723 890099 FACSIMILE +44 (0) 1723 893303 TELEPHONE +1 (815) 316 8706 FACSIMILE +1 (815) 316 8708
EMAIL sales@deepseaplc.com WEBSITE www.deepseaplc.com EMAIL sales@deepseausa.com WEBSITE www.deepseausa.com

Deep Sea Electronics Plc maintains a policy of continuous development and reserves the right to change Registered in England & Wales No.01319649 055–222/10/17 (4)
the details shown on this data sheet without prior notice. The contents are intended for guidance only VAT No.316923457
 DSEControl®

Technical Data
DSEM840
Supply Connector A
Operating voltage 8 V DC to 32 V DC Pin 7
Unit power supply maximum current consumption, full backlight (no external loads) < 1000 mA at 12 V and 24 V
Unit power supply maximum current consumption, full backlight and heater (no external < 1500 mA at 12 V and 24 V
loads)
Unit power supply current consumption after controlled shutdown has occurred due to < 5 mA at 24 V
the ignition being turned off
Fusing Connector A
Unit power supply external protection fuse rating 3A Pin 7
High current outputs supply input external fuse protection rating (i.e. sum of output 10 A Pin 7
currents from all outputs provided for by an individual supply to < external fuse rating in
total)
Housing
PC PBT alloy plastic resin
Dimensions
131 mm x 208 mm x 56 mm (H x W x D) / 5.15” x 8.2” x 2.2” ( H x W x D)
Weight
< 1 kg
Temperature
Operating temperature -30 ˚ C to +65 ˚C / -22 ˚ F to +176 ˚ F

Storage temperature -40 ˚ C to +80 ˚C / -40 ˚ F to +176 ˚ F

Protection Rating
IP67 (mating connectors)
NEMA 6 (mating connectors)
Display
Resolution, pixel 480 px x 272 px
Colour 24 bit
Format 4.3” diagonal
Mounting Optically bonded
Illumination LED (lifetime > 50,000 hrs)
Connectors
Connector A 18 pin TE connectivity DT16-
18SA-K004
Ethernet M12, D-coded 4 pole socket
USB M12, B-coded 5 pole socket
Digital Inputs Connector A
Digital inputs configured high or low Pin 10, 11, 16, 17
High level voltage threshold >6V
Low level voltage threshold <2V
Analogue Voltage Inputs Connector A
0 V to 5 V programmable voltage range 0 V to 5 V Pin 10, 11, 16, 17
0 V to 10 V programmable voltage range 0 V to 10 V
0 V to 32 V programmable voltage range 0 V to 32 V
Voltage measurement resolution 10 bits
Voltage measurement accuracy ± 1% FSD
Voltage measurement input resistance ≥ 30 kΩ
Voltage measurement sampling rate 500 Hz
FSD = Full Scale Deflection

055–222/10/17 (4)
 DSEControl®

DSEM840
Analogue Current Inputs Connector A
Current measurement direction Current sink only Pin 10, 11, 16, 17
Current measurement ranges 0 mA to 20 mA
4 mA to 20 mA
Current measurement resolution 10 bits
Current measurement accuracy ± 1% FSD
Current measurement input sink resistance 100 Ω ± 1%
Current measurement sampling rate 500 Hz
FSD = Full Scale Deflection
Analogue Resistive Inputs Connector A
Resistance measurement range 0 Ω to 3200 Ω Pin 10, 11, 16, 17
Resistance measurement source voltage 12 V maximum
Resistance measurement current 1 mA
Resistance measurement resolution 10 bits
Resistance measurement accuracy ± 1% FSD
Resistance measurement sampling rate 500 Hz
FSD = Full Scale Deflection
Analogue Ratiometric Inputs Connector A
Voltage ratiometric measurement voltage range Pin 10, 11, 16, 17
Voltage ratiometric measurement Vref Supply/Vref
Voltage ratiometric measurement Ratio of input pin to supply
voltage
Voltage ratiometric measurement accuracy ± 1% FSD
FSD = Full Scale Deflection
Frequency Inputs Connector A
Frequency range 5 Hz to 30 KHz Pin 10, 11, 16, 17
Resolution 100 Hz at max. freq
Accuracy 400 Hz at max. freq
Maximum space voltage <1V
Minimum mark voltage >6V
Digital Outputs High Side Connector A
Switching current 1A Pin 2, 3, 4, 5
Digital output active high ‘ON’ state internal voltage drop at rated current < 100 mV
Digital output active high ‘OFF’ state leakage current < 10 µA at 24 V
Digital Outputs Low Side Connector A
Switching current 1A Pin 2, 3, 4, 5
Digital output active low ‘ON’ state maximum voltage at rated current < 100 V
Digital output active low ‘OFF’ state leakage current < 5 µA at 24 V
Reference Voltage Connector A
Reference voltage output Programmable 5 V or 10 V, 6
150 mA accuracy ±5%
VRef GND Pin 18
Auxiliary Voltage Connector A
12 V auxiliary voltage Max 150 mA Pin 13

055–222/10/17 (4)
 DSEControl®

DSEM840
RTC
Real time clock Standard RTC, backup time
~
5 years
Camera Connector A
Analogue video input (supported video standards: PAL and NTSC) 1 12,18
CAN Interfaces Connector A
Number of CAN ports 2 Pin 8, 9, 14, 15
Supported protocols J1939
CAN open
Raw CAN
Supported programmable baud rates 50 kbit/s, 125 kbit/s, 250
kbit/s, 500 kbit/s, 800 Mbit/s,
1 Mbit/s
Ethernet Interface M12, 4 pole
Number of Ethernet ports 1 D-coded 4 pole socket
Supported data rates 10/100 Mbit/s
Supported protocols Modbus TCP
CODESYS 3.5
USB Interface M12, 5 pole
Number of USB host ports 1 B-coded, 5 pole socket
Supported USB version 2
Speeds supported Full speed (12 Mbit/s)
Device class supported 08 (Mass Storage)
Supported filing system FAT32
Processor
NXP LPC4357 Dual ARM M4 & M0 Cortex
200 MHz
Memory
Flash 32 MB
LED Status
RAM 16 MB
Colour Description Operation State
None Device not powered N/A Off
Green Unit powered up, application program loaded but not running Static Application stopped

Unit powered up, application program loaded and running 1 Hz flash Application running

Unit powered up, but no application program loaded 5 Hz flash No application

Amber Bootloader functioning normally, firmware present Static Bootloader mode

Firmware is at start-up Static Firmware start-up

Unit stopped due to a serious fault Static Application exception

Bootloader is decrypting the downloaded image 1 Hz flash Decrypting image

Bootloader is reading an image from the USB 5 Hz flash Reading image from
USB
Red Fatal system/hardware fault - LEd may be driven directly by Static Fatal error
microcontroller error pin or firmware is in a fault condition
1 Hz flash Faulty application
Unit running with a fault, see CODESYS error flags running
or web tool.

055–222/10/17 (4)
 DSEControl®

DSEM840
Environmental and Testing
CE marking Electromagnetic compatibility (EMC) noise immunity EN 13309
Electromagnetic compatibility (EMC) emission standard EN 13766
E11 marking Emission standard noise immunity with 100 V/m UN/ECE-R10
Electrical tests Pulse 1, severity level: IV; function state C ISO 7637-2
Pulse 2a, severity level: IV; function state B
Pulse 2b, severity level: IV; function state C
Pulse 3a, severity level: IV; function state A
Pulse 3b, severity level: IV; function state A
Pulse 4, severity level: IV; function state B
Pulse 5a, severity level: III; function state C
Climatic tests Damp heat, cyclic upper temperature 55˚C, number EN 60068-2-30
Damp heat, steady state test temperature 40 ˚C / 93% RH EN 60068-2-78
Test duration: 21 days
Salt spray test severity level 3 (vehicle) EN 60068-2-53
Mechanical tests Test VII; vibration, random mounting location: vehicle body ISO 16750-3
Vibration, sinusoidal EN 60068-2-6
2000 Hz: 0.73 mm / 10g: 10 cycles/axis
Bumps 30 g / 6 ms; 24,000 shocks ISO 16750-3

055–222/10/17 (4)
 DSEControl®

DSEM840
PROGRAMMABLE DISPLAY FOR USE IN
VEHICLES AND OFF-HIGHWAY MACHINERY

Connector A Ethernet
M12 “D” coded - 4 pin female
PIN DESCRIPTION REF

1 ECU Supply GND

Pin - 01 TX+
2 OUT H, L QA002
Pin - 02 RC+
3 OUT H, L QA001
Pin - 03 TX-
4 OUT H, L QA004
Pin - 04 RC-
5 OUT H, L QA003

6 VREF OUT

7 Battery USB Host

M12 ‘B’ coded - 5 pin female
8 CAN1 H

9 CAN 2 H

10 AIN IA001
Pin -01 5V
11 AIN IA002
Pin - 02 Data+
12 Camera 1
Pin - 03 Data-
13 Ignition
Pin - 04 0V
14 CAN1 L
Pin - 05 Shield
15 CAN2 L

16 AIN IA003

17 AIN IA004

18 Camera 1 GND

Abbreviations
OUT H, L Output can be configured as digital high-side or digital low-side
AIN Input can be configured to accept signalsfrom positive digital, negative digital, 0 V to 10 V, 4mA to 20 mA, ratiometric, resistive or frequency
A GND Ground connection for the analogue input channels

055–222/10/17 (4)