Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 305 views

    Jis A 5335 1987 Pretensioned Spun Concrete Piles PDF

    Uploaded by

    garpheet

    Copyright:

    © All Rights Reserved
    Download as PDF or read online from Scribd

    Jis A 5335 1987 Pretensioned Spun Concrete Piles PDF

    Uploaded by

    garpheet
    305 views12 pages

    Original Title

    kupdf.net_jis-a-5335-1987-pretensioned-spun-concrete-piles.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF or read online from Scribd
    Download as pdf
    305 views12 pages

    Jis A 5335 1987 Pretensioned Spun Concrete Piles PDF

    Uploaded by

    garpheet

    Copyright:

    © All Rights Reserved
    Download as PDF or read online from Scribd
    Download as pdf
    You are on page 1of 12
    UDC 624.155.113.012.46 : 666.982.4.033.17 : 666.982.4.033.4 JAPANESE INDUSTRIAL STANDARD Pretensioned Spun Concrete Piles @ JIS A 5335-ve Translated and Published by Japanese Standards Association Printed in Japan a UDC 624, 155. 113.012. 46; 666. 982. 4.033. 17: 666. 982.4.033.4 . JAPANESE INDUSTRIAL STANDARD gis Pretensioned Spun Concrete Piles A 5335-1987 1. Scope ‘This Japanese Industrial Standard specifies the prestressed concrete piles manufactured by pretensioning and spinning process, hereinafter referred to as the "PC Piles", : Remark: In this Standard, the units and numerical values given in { } are in accordance with the International System of Units (SI), and are given for reference only. 2. Classification The PC piles shall be classified by the outside diameter into 300 mm, 350 mm, 400mm, 450 mm, 500 mm, 600mm, 700 mm, 800 mm, 1000 mm and 1200 mm, and the piles of respective outside diameters shall further be classified into Class A, Class B and Class C depending on the value of erack- ing bending moment. 3. Quality 3.1 Appearance The PC piles shall be free from defects such as detrimental flaws or cracks. 3.2 Bending Strength 3.2.1 Main Body The main body of the PC piles shall be subjected to the bending strength test specified in 8.1, and shall withstand the cracking bending moment given in Table 1 without showing any cracks. The breaking bending moment shall be not less than 1.5 times the cracking bending moment given in Table 1 for Class A, not less than 1.8 times for Class B and not less than 2.0 times for Class C. Table 1. Cracking Bending Moment & i - racking bend- ~~ Guiside F crass | Sng moment [OU8S¢ | cisay | {ne monet ti Ufem(kN-m) | Game tf-m( Ie +m} A 2.5{ 24.5} A 7.5( 73.6) 300 B 3.5{ 34.3} 450 B 11, 0(107.9) c 4.0( 39.2} c 12. 5(122.6) A 3.5 34.3} A 10.5{103.0) 350 B 5.0 49.0} 500 B 15.0(147.1) . ce 6.0 58.8) c 17.0(166.7) A 5.5{ 53.9} A 17, of 166.7} 400 B 7.5{ 73.6) 600 B 25.0 245.2) c 9.0 88.3) c 29,0( 284.4) Applicable Standards and Reference Standard: See page 10, 2 ‘A 5335-1987 Table 1 (Continued) - Outside Cracking bend-|) Outside Cracking bend- diameter | Class | ing moment diameter| Class | ing moment an tf-m (kN-m) 7 = ft-m (kN-m) A 27.0( 264.8) A 75. 0( 735.5) . 700 B 38.0( 372.7) 1000 B 105. 0(1029.6 } c 45.of 441.3} c 120, 0(1176.8} A 40.0{ 392.3) A 120,0(1176.8) 800 B 55.0 539.4} 1200 B 170, 0{1667.1) c 65.0( 637.4) c 200, 0(1961. 3) 3.2.2 Jointing End The bending strength of jointing end shall be equal to or higher than the breaking bending strength selected from the bending strengths specified in 3.2.1. 4. Construction 4.1 Construction of End Portion The construction of the end portion of PC piles shall be such that it can transmit the load safely to the foundation soil- 4.2. Construction of Head Portion The construction of the head portion of PC piles shall be such that it does not provide any hindrance in the piling operation. 5. Shape and Dimensions 5.1 Shape The PC pile shall be composed of the main body of hollow cylindrigal shape as shown in Fig. 1, and shall have the suitable end, jointing end or head, as necessary, ‘The outside diameter and wall thickness of > main body shall be uniform at any.cross section over the whole length. Fig. 1 Length, Outside ciameter | Nain body, Lengths of the end, jointing end and head are included in the total length. 2. The length of an end’ fitting attached after the fabrication of the PC pile shall not be included in the length thereof. 3. There are various types of ends, e.g., closed type, open type, ete. 4. An upper or intermediate pile may be utilized as a lower pile by providing an end portion.

    You might also like