Budz
Budz
Budz
As (mm2) 4060.91371
N 20.20
PUNCHING SHEAR
Vn (Mpa) 0.1349 Actual Shear due to Load
Vc (Mpa) 1.5166 Concrete Shear Capacity
Remarks SAFE
BEAM SHEAR
Vn (Mpa) 0.0514 Actual Shear due to Load
Vc (Mpa) 0.7583 Concrete Shear Capacity
Remarks SAFE
BEARING STRENGTH
(A2 / A1)^.5 5.00
max (A2 / A1)^.5 2.00
Bearing Strength (KN) 3941.3
Actual Load (KN) 174.7
Remarks SAFE
268.91
Square Column Design Square Column Design
(with Axial Load & Moment) (with Axial Load & Moment)
DESIGN BY ANALYSIS METHOD DESIGN BY ANALYSIS METHOD
a1 -2,621.04 1st result of quadratic equation a1 -560.08 1st result of quadratic equation
a2 21.04 2nd result of quadratic equation a2 73.86 2nd result of quadratic equation
Pn 148,097.62 Pn 519,799.56
Pu (N) 103,668.33 Pu (N) 363,859.69
Pu (KN) 103.668 Pu (KN) 363.860
C 24.76 C 86.89
Ey 0.001379 Ey 0.001379
Es' -0.004271 Es'<Ey Comp. Steel Doesn’t Yield Es' 0.000928 Es'<Ey Comp. Steel Doesn’t Yield
Es 0.038202 Es>Ey Tension Steel Yields Es 0.008739 Es>Ey Tension Steel Yields
Pu (KN) 103.67 Pu (KN) 363.86
Mu (KN-m) 155.50 Mu (KN-m) 161.23
TIES TIES
O ties 10.000 O ties 10.000
L/2 1.000 L/2 1.000
Pu 274.810 Pu 274.810
Vu 181.375 Vu 181.375
O Vc 84.152 O Vc 84.152
O Vc (1/2) 42.076 O Vc (1/2) 42.076
O Vs 97.223 O Vs 97.223
O Vs (max) 347.126 O Vs (max) 347.126
O Vs (1/2max) 173.563 O Vs (1/2max) 173.563
L @ max 0.153 L @ max 0.153
L @ min 0.153 L @ min 0.153
L @ design 0.694 L @ design 0.694
S @ max 170.000 S @ max 170.000
S @ min 318.548 S @ min 318.548
S @ design 128.779 S @ design 128.779
# @ max 0.901 # @ max 0.901
# @ min 0.481 # @ min 0.481
# @ design 5.387 # @ design 5.387
268.91
Beam Loadings
Beam 1 Beam 2 Beam 3 Beam 4
Note: Always check Beam 1
design if simply supported
width (mm) 350 width (mm) 350 width (mm) 350 width (mm) 350
height (mm) 500 height (mm) 500 height (mm) 500 height (mm) 500
Positive Moment (Kn-m) 0.961 in both direction (case 1) p(min) 0.0050761 p(min) 0.0050761
p(bal) 0.0371501 p(bal) 0.0371501
Negative Moment 0.320 at all sides (1/3 of positive moment) p(max) 0.0278626 p(max) 0.0278626
C 0.0096357 C 0.0032119
w 0.0057040 w 0.0018971
p 0.0004281 p 0.0001424
As 837.56345 As 837.56345
N 10.66 N 10.66
N 15.51 N 15.51
Wall Loadings
A.) Wall of Tank (Horizontal Bars - from bottom to middle) Positive Moment @ "A" Positive Moment @ "B"
Height of stored water (m) 2.5 moment 27.591 moment 13.795
Span of Wall (m) 3 L (along the length of bottom of wall) constant 0.9 constant 0.9
Water Density (Kg/m )3
1000 f'c 20.7 f'c 20.7
Pressure at Bottom (KPa - Kn/m2) 24.525 b 1000 b 1000
Force Per Linear Meter (Kn/m) 24.525 w (along the length of bottom of wall) d 180 d 180
Positive Moment (Kn-m) 27.591 fy 275.8 fy 275.8
bar dia. 12 bar dia. 12
B.) Wall of Tank (Horizontal Bars - from middle to top)
Height of stored water (m) 1.25
Span of Wall (m) 3 L (along the length of middle of wall)
Water Density (Kg/m )3
1000 p(min) 0.0050761 p(min) 0.0050761
Pressure at Bottom (KPa - Kn/m2) 12.2625 p(bal) 0.0371501 p(bal) 0.0371501
Force Per Linear Meter (Kn/m) 12.2625 w (along the length of middle of wall) p(max) 0.0278626 p(max) 0.0278626
Positive Moment (Kn-m) 13.795 C 0.0774732 C 0.0387366
w 0.0470108 w 0.0231702
C.) Wall of Tank (Shear Strength at the Base of the Wall) p 0.0035284 p 0.0017390
F (Total Force Acting on Wall - N) 91968.75
Vu (Factored load(1.4) - N) 128756.25 As 913.70558 As 913.70558
Vn (Shear Stress on Wall Base - N/mm2) 0.2805
Vc (Shear Strength of Conc. - N/mm )
2
0.7583 N 8.08 N 8.08
Design ("Passed" or "Failed") PASSED S 110.15 S 110.15
V = (Z I C W) / Rw
H (total) 8.50
T = Ct H^(3/4) 0.25 < 0,7 therefore Ft=0,00 (Fx=(V-Ft)WxHx/summWxHx)
C = 1,25*S/(T^(2/3)) 4.74
S 1.50
Z (zone 4) 0.40
I (special occupancy) 1.25
Rw (non-bldg. frame, tanks) 3.00
V 149.73
No. of columns 2.00
LEVEL Wx Hx WxHx Fx FxHx x 2x h M (col/ext) M (col/int) span M (beam/ext) M (beam/int) V (beam) Axial (col)
bot. Slab 166.93 4.00 667.71 149.73 598.93 3.00 149.73 0.00 99.82
foundation 22.66 0.00 0.00 0.00 0.00 74.87 0.00 4.00 149.73 0.00 4.00 149.73 0.00 74.87 99.82
summ 667.71 149.73 598.93 149.73 174.69