This document provides calculations for the design of a roof beam with the following properties:
- Beam length of 4500mm or 5000mm
- Cross section of 200mm width and 300mm depth
- Reinforcement details are calculated to resist bending moments and shear forces
- Minimum and nominal reinforcement areas are calculated based on the beam's properties and loadings
This document provides calculations for the design of a roof beam with the following properties:
- Beam length of 4500mm or 5000mm
- Cross section of 200mm width and 300mm depth
- Reinforcement details are calculated to resist bending moments and shear forces
- Minimum and nominal reinforcement areas are calculated based on the beam's properties and loadings
This document provides calculations for the design of a roof beam with the following properties:
- Beam length of 4500mm or 5000mm
- Cross section of 200mm width and 300mm depth
- Reinforcement details are calculated to resist bending moments and shear forces
- Minimum and nominal reinforcement areas are calculated based on the beam's properties and loadings
This document provides calculations for the design of a roof beam with the following properties:
- Beam length of 4500mm or 5000mm
- Cross section of 200mm width and 300mm depth
- Reinforcement details are calculated to resist bending moments and shear forces
- Minimum and nominal reinforcement areas are calculated based on the beam's properties and loadings
Ast = Max {B, C+D, A+D} (for Mu > 0 and C x 1.33 > B) Ast = Max{B', C x 1.33 + D, A+D} (for Mu > 0 and C x 1.33 < B) Ast = Bn (for Mu = 0) Where, Compression reinforcement required for A = Asc (flex) = bending moment B = As,min (flex) = Min area of flexural reinforcement Bn = As,nominal = Nominal area of reinforcement Total area of longitudinal reinforcement C = As (flex) = calculated at a given section Distributed longitudinal torsional D = Al (Dist) = reinforcement at section considered Max(Al,min (Tor), Al (Tor)) x ((2B) / (2B + Ast (Dist) (sqmm) = 2D))
For Transverse Reinf
Left Mid Right Critical L/C - RCDC 1 1 1 PtPrv (%) 0.452 0.452 0.452 Vu (kN) 6.08 2.76 5.51 Mu-Sect (kNm) 5.57 1.21 4.29 Φ Vc (kN) 28.07 28.94 28.21 Vs (kN) - - - Aoh (sqmm) - - - At (sqmm/m) - - - Av (sqmm/m) 308.37 308.37 308.37 Tu (kNm) 0.08 0.08 0.08 At Torsion (sqmm/m) 0 0 0 Av Total Reqd (sqmm/m) 308.37 308.37 308.37 Asv Reqd (sqmm/m) 308.37 308.37 308.37 Legs 2 2 2 Stirrup Rebar 10 10 10 SCalc (mm) 90 90 90 SPrv (mm) 90 90 90 Av Total Prv (sqmm/m) 1745.33 1745.33 1745.33
Maximum Spacing Criteria
Basic Spc1 = 125 mm Spc2 = 300 mm For Torsion (X1 = 130, Y1 = 230) Spc3 = 300 mm Spc4=(X1+Y1)/4 = 90 mm Skin reinforcement
Beam Width = 200 mm
Beam Depth = 300 mm Depth = 300 <= 900, Hence Skin Reinforcement is not required.
Group : G5 Beam No : B9 Analysis Reference (Member) 8.5 : 77 m Beam Length : 5000 mm Breadth (B) : 200 mm Depth (D) : 300 mm Effective Depth (d) : 250 mm Design Code : NSCP - 2015 Beam Type : Regular Beam Grade Of Concrete (f'c) : C21 N/sqmm Grade Of Steel : Fy227 N/sqmm Clear Cover (Cmin) : 40 mm Es : 2x10^5 N/sqmm Mubal : 65.46 kNm As,min (flex) (B) : 308.37 sqmm As,nominal (Bn) : 65 sqmm As,min(user input)(B') : 65 sqmm
Ast = Max {B, C+D, A+D} (for Mu > 0 and C x 1.33 > B) Ast = Max{B', C x 1.33 + D, A+D} (for Mu > 0 and C x 1.33 < B) Ast = Bn (for Mu = 0) Where, Compression reinforcement required for A = Asc (flex) = bending moment B = As,min (flex) = Min area of flexural reinforcement Bn = As,nominal = Nominal area of reinforcement Total area of longitudinal reinforcement C = As (flex) = calculated at a given section Distributed longitudinal torsional D = Al (Dist) = reinforcement at section considered Max(Al,min (Tor), Al (Tor)) x ((2B) / (2B + Ast (Dist) (sqmm) = 2D))
For Transverse Reinf
Left Mid Right Critical L/C - RCDC 1 1 1 PtPrv (%) 0.804 0.452 0.804 Vu (kN) 9.41 4.28 8.34 Mu-Sect (kNm) 9.29 2.84 6.61 Φ Vc (kN) 28.58 28.37 28.9 Vs (kN) - - - Aoh (sqmm) - - - At (sqmm/m) - - - Av (sqmm/m) 308.37 308.37 308.37 Tu (kNm) 0.04 0.04 0.04 At Torsion (sqmm/m) 0 0 0 Av Total Reqd (sqmm/m) 308.37 308.37 308.37 Asv Reqd (sqmm/m) 308.37 308.37 308.37 Legs 2 2 2 Stirrup Rebar 10 10 10 SCalc (mm) 90 90 90 SPrv (mm) 90 90 90 Av Total Prv (sqmm/m) 1745.33 1745.33 1745.33
Maximum Spacing Criteria
Basic Spc1 = 125 mm Spc2 = 300 mm For Torsion (X1 = 130, Y1 = 230) Spc3 = 300 mm Spc4=(X1+Y1)/4 = 90 mm
Skin reinforcement
Beam Width = 200 mm
Beam Depth = 300 mm Depth = 300 <= 900, Hence Skin Reinforcement is not required.
Group : G6 Beam No : B11 8.5 Analysis Reference (Member) : 83 m Beam Length : 1000 mm Breadth (B) : 200 mm Depth (D) : 300 mm Effective Depth (d) : 250 mm Design Code : NSCP - 2015 Beam Type : Cantilever Beam Grade Of Concrete (f'c) : C21 N/sqmm Grade Of Steel : Fy227 N/sqmm Clear Cover (Cmin) : 40 mm Es : 2x10^5 N/sqmm Mubal : 65.46 kNm As,min (flex) (B) : 308.37 sqmm As,nominal (Bn) : 65 sqmm As,min(user input)(B') : 65 sqmm
Ast = Max {B, C+D, A+D} (for Mu > 0 and C x 1.33 > B) Ast = Max{B', C x 1.33 + D, A+D} (for Mu > 0 and C x 1.33 < B) Ast = Bn (for Mu = 0) Where, Compression reinforcement required for A = Asc (flex) = bending moment B = As,min (flex) = Min area of flexural reinforcement Bn = As,nominal = Nominal area of reinforcement Total area of longitudinal reinforcement C = As (flex) = calculated at a given section Distributed longitudinal torsional D = Al (Dist) = reinforcement at section considered Max(Al,min (Tor), Al (Tor)) x ((2B) / (2B + Ast (Dist) (sqmm) = 2D))
For Transverse Reinf
Left Mid Right Critical L/C - RCDC 1 1 1 PtPrv (%) 0.804 0.804 0.804 Vu (kN) 4.26 4.92 5.72 Mu-Sect (kNm) 0.8 2.33 4.1 Φ Vc (kN) 32.41 30 29.07 Vs (kN) - - - Aoh (sqmm) - - - At (sqmm/m) - - - Av (sqmm/m) 308.37 308.37 308.37 Tu (kNm) 0.87 0.87 0.87 At Torsion (sqmm/m) 0 0 0 Av Total Reqd (sqmm/m) 308.37 308.37 308.37 Asv Reqd (sqmm/m) 308.37 308.37 308.37 Legs 2 2 2 Stirrup Rebar 10 10 10 SCalc (mm) 90 90 90 SPrv (mm) 90 90 90 Av Total Prv (sqmm/m) 1745.33 1745.33 1745.33 Maximum Spacing Criteria
Basic Spc1 = 125 mm Spc2 = 300 mm For Torsion (X1 = 130, Y1 = 230) Spc3 = 300 mm Spc4=(X1+Y1)/4 = 90 mm
Skin reinforcement
Beam Width = 200 mm
Beam Depth = 300 mm Tu = 1.02 kNm Tcr/4 = 1.02 kNm Beam Depth > 900 Or Tu > Tcr/4, Hence Skin Reinforcement is Provided Al Tor. (max) = 393.82 sqmm Asr = Max(Al(min)(Tor.), Al(Tor.)) x (2D / (2B+2D)) = 236.29 sqmm SR provided = 1-#16EF Asr provided = 402.12 sqmm
