CL INTERIOR SUPPORT CL INTERIOR SUPPORT CL INTERIOR SUPPORT

FOR SIZE AND SPACING OF

STIRRUPS (TYPICAL)
STIRRUPS, SEE REINFORCED
CONCRETE BEAM SCHEDULE

40mm CLEAR TO
(TYPICAL)
0mm
STANDARD 90 TOP BARS TOP BARS EXTRA TOP BARS CONT. TOP BARS
DEGREE HOOK
(TYPICAL)

TYPICAL
0mm

STIRRUPS (TYPICAL)
EXTRA EXTRA

200
BOTTOM BOTTOM

40mm CLEAR TO
BARS BARS

CONTINUOUS CONTINUOUS
BOTTOM BARS BOTTOM BARS SIDE BARS (TYP.) SEE
SCHEDULE FOR SIZE
CONCRETE CONCRETE AND NUMBER
COLUMN COLUMN
OR BEAM OR BEAM
(TYPICAL) (TYPICAL)

EXTERIOR SUPPORT INTERIOR SUPPORT INTERIOR SUPPORT

(DISCONTINUOUS END) (CONTINUOUS END) (CONTINUOUS END)
X - DIRECTION

TYPICAL BEAM DETAILS

1500

SCALE NTS
BEAM SECTION
DETAILS
TOP BARS L C CONCRETE BEAM

40mm CLEAR TO NOTES:

STIRRUPS TYPICAL
ADDITIONAL ROW OF TOP 1. LC1, LC2 = LENGTH OF CLEAR SPANS 1,

Y - DIRECTION
BARS (AS REQUIRED) 2 (FACE OF SUPPORT TO FACE OF SUPPORT)
2. L = THE GREATER LENGTH OF CLEARSPAN LC1 OR LC2
3. AT INTERIOR SUPPORT (CONTINUOUS END) PROVIDE
LARGER SIZE AND NUMBER OF TOP BARS

BEAM STIRRUPS
FROM ADJACENT SPANS. BEAM MARK BEAM LEVEL SUPPORT MID SPAN
4. EXTERIOR AND INTERIOR SUPPORT REINFORCEMENT NOT
400

SHOWN FOR CLARITY

300 300

75 mm
3-#16 3-#16
ADDITIONAL ROW OF BOTTOM
BARS (AS REQUIRED) WEB BARS FTB @ GROUND LEVEL

400

400
(TYPICAL)
BOTTOM BARS
STP 2L-#10 STP 2L-#10
NOTE:
SLAB REINFORCEMENT NOT SHOWN FOR CLARITY 3-#16 3-#16

SECTION
SCHEDULE OF COLUMN FOOTINGS
SCALE: NTS

525
SCHEDULE OF ISOLATED FOOTING REINFORCEMENT
DIMENSION
X Y
FOOTING THICKNESS RSB SIZE B.O.F
LENGTH DIRECTION DIRECTION
MARK WIDTH
NOTE : SEE PLAN FOR ACTUAL 12-16mm Ø VERT. BARS
F1 1500 1500 400 16mm 9-16mm 9-16mm @ DEPTH OF 1.50m FROM N.G.L. COLUMN ORIENTATION.

525
M
TYP
12mm THK
STIFFENER PLATES 3 SETS 10mm Ø
AT 150 C/C
4-20mm Ø A325 ANCHOR BOLTS
EMBEDMENT DEPTH = 500 mm 6-20mm Ø A325 ANCHOR BOLTS
EMBEDMENT DEPTH = 500 mm

200
LEVELING GROUT
25mm THK NON-SHRINK

25 75
PEDESTAL DETAILS

16
150mm THK. CONCRETE SLAB-ON-GRADE F.F.L. 16mm THICK SCALE: NTS
BASE PLATE
12mØ DRSB @ 250mm O.C. BOTH WAYS
75

581
TOP OF SLAB
6-20mm Ø A325 ANCHOR 28 526 28
150

BOLTS W/ DOUBLE NUT & 220 220

WASHER (BOLTS WITHIN
REBAR CAGE) 6 -20mm Ø A325 ANCHOR BOLTS
EMBEDMENT DEPTH = 500 mm
50

28
PEDESTAL REBAR

220
CAGE
SUBGRADE COMPACTED TO 95% MDD 12mm THK STIFFENER PLATES
BASED ON ASTM D-698

581

526
50mm THK. GRAVEL BED COMPACTED TO

220
95% MDD BASED ON ASTM D-698 PEDESTAL SECTION DETAILS STEEL COLUMN
W 12X88

SCALE: NTS 20mm THICK

28
BASE PLATE
25mm THK NON-SHRINK
LEVELING GROUT

SLAB ON GRADE DETAILS BASE PLATE DETAILS

SCALE: NTS
SCALE: NTS