Engr. Mark Christian D. Esguerra
Engr. Mark Christian D. Esguerra
Engr. Mark Christian D. Esguerra
LOGO Owner :
Location :
Mark :
Date :
C1-2nd to Roof
2/25/2021
Check by : Engr. Mark Christian D. Esguerra
Z-Axis
800 800
600 600
400 400
Y-Axis
200 200
φMn, kNm
X-Axis φMn, kNm
0 0
-60 -40 -20 0 20 40 60 -60 -40 -20 0 20 40 60
-200 -200
Detailed Calculations
Shear Calculation Along X Along Y
Along X c Mn Pn φ φMn φPn c Mn Pn φ φMn φPn
● Minimum Shear Reinforcement NSCP 2015 410.6.2 0 0.0 1046.0 0.6 0.0 679.9 - 0.0 1046.0 0.6 0.0 679.9
Vu > 0.5φVc No shear reinforcement Required 410.6.2.1 293 3.3 1046.0 0.6 2.1 679.9 293 3.3 1046.0 0.6 2.1 679.9
Shear reinforcement required, 56.25 410.6.2.2 274 12.4 1046.0 0.6 8.1 679.9 274 12.4 1046.0 0.6 8.1 679.9
● Shear strength provided by concrete NSCP 2015 422.5.6 255 20.5 1046.0 0.6 13.3 679.9 255 20.5 1046.0 0.6 13.3 679.9
Vc (kN)= 54.3783 236 27.7 1014.0 0.6 18.0 659.1 236 27.7 1014.0 0.6 18.0 659.1
● Shear strength provided by transverse reinforcement 217 33.9 924.9 0.6 22.0 601.2 217 33.9 924.9 0.6 22.0 601.2
Vs(kN) = 0 198 38.6 839.3 0.6 25.1 545.6 198 38.6 839.3 0.6 25.1 545.6
● Total Shear Strength 179 43.1 742.2 0.6 28.0 482.4 179 43.1 742.2 0.6 28.0 482.4
Vtotal (kN)= 40.78374 160 47.0 638.8 0.6 30.5 415.2 160 47.0 638.8 0.6 30.5 415.2
● Maximum spacing of shear reinforcement (Table 410.7.6.5.2) 141 50.3 526.7 0.6 32.7 342.4 141 50.3 526.7 0.6 32.7 342.4
Spacing (mm)= 120 NSCP 2015 410.7.6.5.2 122 49.9 449.1 0.6 32.4 291.9 122 49.9 449.1 0.6 32.4 291.9
Along Y Code Requirements Checking for Slenderness
● Minimum Shear Reinforcement NSCP 2015 410.6.2 NSCP 2015 Discription Req. Status Label Along X Along Y
Vu > 0.5φVc No shear reinforcement Required 410.6.2.1 Min Width 250.0 CC Ks.Lu/r = 66.7 66.7
418.7.2.1
Shear reinforcement required, 56.25 410.6.2.2 Ratio 0.4 CC Remark = Slender Slender
● Shear strength provided by concrete NSCP 2015 422.5.6 418.7.4.1 Main Bar Ratio 1%-6% CC Cm = 0.00 0.00
Vc (kN)= 54.37832 Req. Ties Along X 350.0 δ_ns/s = 0.00 0.00
CC
● Shear strength provided by transverse reinforcement Actual Ties Along X 100.0 Check Mc / M_top = 0.00 0.00
418.7.5.2
Vs(kN) = 0 Ties Along Y 350.0 Check Mc / M_bot = 0.00 0.00
CC
● Total Shear Strength Actual Ties Along Y 100.0 Remark_top = 0.00 0.00
Vtotal (kN)= 40.78374 Legend Remark_bot = 0.00 0.00
● Maximum spacing of shear reinforcement (Table 410.7.6.5.2) CC = NSCP 2015 Code Complaint
Spacing (mm) = 120 NSCP 2015 410.7.6.5.2 NC = NSCP 2015 Non Code Complaint