www.yoowonind.

com

ISO 9001 / ISO 14001

Certificate No. 33163 / 36826

DNVCertification, Ltd.

ISO 9001 / ISO 14001

Certificate No. 33163 / 36826

YOOWON-MITSUBISHI

Electro-Hydraulic
Steering Gears

YOOWON INDUSTRIES LTD.

 Electro-Hydraulic
YOOWON-MITSUBISHI

Steering Gears

Meaning of Type designation

Y D F T 6 0 1

Y Manufacturer's symbol
D DF Double Fork type (2 Ram-4 Cylinders)
F SF Single Fork type (1 Ram-2 Cylinders)
T C : Constant delivery pump valve control system
T : Variable pump torque motor control
(Electrical pump control system)
6
Torque capacity (t-m)
0
1 1. Without stand-by pump
2. With main and stand-by pump
3. With 3 pumps (1 pump stand-by)
4. With 4 pumps (2 pumps stand-by)
 YOOWON-MITSUBISHI Electro-Hydraulic Steering Gears

Features
Steering Gear T Series [ Electrical Pump Control S/G ] C Series [ Valve Control S/G ]
Instruction The electric rudder command signal is compared with the
The electric rudder command signal is compared with the feed-
feed-back signal of actual rudder angle in the steering
back signal of actual rudder angle in the steering stand.
stand. The rudder angle deviation signal from the steering
The rudder angle deviation signal from the steering stand
stand is amplified by the amplifier and controls electrically
operates the solenoid valve and controls the direction of oil from
the stroke of variable displacement type pump through
fixed displacement pump.
torque motor.
Trouble free The maximum durability and reliability are guaranteed as steering gear.
Adoption of pump The adoption of Mitsubishi Janney pump ( a variable
delivery pump ) with an integrated servo controller of higher
Fixed displacement vane type Hydraulic pump.
pressure and longer life has enabled the design of high
pressurization and durable steering gear.
No-load motor start up Since the motor of the hydraulic pump can be started in the
No-load condition, the emergency generator can be
designed just that much smaller in capacity.
Easy adaptability to
classification societies Steering gear can be easily complied with specification of tanker over than 10,000GT by changing the valve block.
regulation
Compact arrangement Simple and compact constitution are gained since external pipings are minimized and oil tank and electric motor are installed
on the hydraulic cylinder.
The power unit or receiver for remote control system is not
The power unit of remote control system is not required since
required since the hydraulic pump is controlled by electric
the hydraulic pump is controlled by electric signal.
signal.
Easy installation Steering gear is constructed with all pipings completed in the factory, requiring only a simple installation work on the ship.

Maintenance free Follow-up mechanisms of main parts of ram, hydraulic cylinder, etc. are especially of sturdy construction and full consideration
is given to safety. Each joint portion is provided with oil-impregnated metal to facilitate maintenance.
The local steering can be performed by mechanical The local steering can be performed by pushing manually the
handle on the servo mechanism on the pump. push rod of solenoid valve,
Complete dual control The control system is made to meet ABS and other classification societies rule requirements within the limit of the standard
system design specification.

INFORMATION OF YOOWON INDUSTRIES LTD. ¯ 3

Pump Control Type (T series)

YDFT
YDFT Type Electro-Hydraulic steering gears

System configuration and Functions

1. In both 1-ram 2-cylinder and 2-ram 4-cylinder types, the rudder actuator has a total capacity (torque) equivalent to 100% of
design capacity and the power system is completely doubled.
2. When a single failure accompanying oil leakage occurs in the piping system, the low oil level detector of the oil tank
connected to the power system in operation is actuated to send an alarm to the bridge and engine room. Valve adjustment
of A~ F on the next page diagram is then done manually in the steering gear room in order to isolate the malfunctioning
hydraulic system. Thus maintaining stable operation of the power system .In this manner, steering capacity is maintained.
3. Changing valves A and B to automatic isolation valves satisfies IMO regulation for over 10,000 GT tankers. In that case,
when a single failure accompanying oil leakage occurs in the piping system, by the low oil level detector of the oil tank
connected to the power system in operation, the other power system is started for parallel operation automatically or
remotely. At the same time, the circuit isolation valves of both circuits actuate to isolate the malfunctioning piping system
automatically. Thus, steering capability is maintained. And the power system in line with the malfunctioning piping system is
stopped automatically by the second low level detector. At the same time, the related isolation valve also returns to its
original position.
4. After a single failure as described above, the rudder actuator capacity is reduced to half to designcapacity. It is necessary to
reduce ship speed to half of max. speed or below 7 knots.

4 ¯ INFORMATION OF YOOWON INDUSTRIES LTD.

 YOOWON-MITSUBISHI Electro-Hydraulic Steering Gears

MHI Standards for IMO Hydraulic diagram

All ships excluding tanker above 10,000GT
No.2 VALVE BLOCK No.2 PUMP UNIT

No.2 SERVO CONTROLLER

SAFETY VALVE
No.2 HYDRAULIC
PILOT BY-PASS VALVE
RELIEF BOOST
BY-PASS VALVE VALVE RELIEF
B VALVE
No.2 MANUAL
ISOLATION VALVE
M
No.2 MOTOR
No.4
No.2 JANNEY PUMP No.2 AUXILIARY PUMP
No.2 No.2 TRANSFER VALVE

INTER CONNECTION LINE No.1 SERVO CONTROLLER

No.1 HYDRAULIC
No.1 PUMP UNIT BY-PASS VALVE

No.1 PILOT
No.3 RELIEF BOOST
CYLINDER VALVE RELIEF OPTION 1
VALVE

M No.1 MOTOR
No.1 AUXILIARY PUMP
A No.1 JANNEY PUMP
No.1 MANUAL
ISOLATION VALVE SAFETY VALVE No.1 TRANSFER VALVE
LEVEL SWITCH FOR
No.1 VALVE BLOCK LOW LEVEL ALARM

Merits of YDFT type

1. Excellent Response and Energy-Saving 6. Complete Dual Control System
The torque motor system enables the steeling gear to respond more The complete control system is made to meet ABS and other
accurately and more quickly to the steeling command from steeling classification societies rule requirements, with in the limit of the
stand than the hitherto-employed mechanical link system, especially in standard design spccification.
fine rudder angle The pay off : no propensity of the ship meandering,
hence no waste of precious fuel
Mechanism of Solenoid Valve Control
2. Simple Construction and Compact Design
with Constant Delivery Pump
Pump discharge is controlled electrically by the torque motor. Without
the auto-pilot receiver and mechanical link of the conventional system,
the new system is simple in construction and compact in design Steering Stand

3. High Reliability B2 B1 B

The torque motor employed is the brushless gearless type and a D.C
motor with no rubbing parts Non-follow-up steering by-passing the Repeat Back Unit
amplifier can be performed from the bridge The hydraulic system
remains identical to that of the conventional steering gear of proven Steering Gear

design, with mechanical feedback links Servo Motor

4. Ease of Control in Emergency Steering Hydraulic pump
Emergency steering can be performed with the mechanical handle on
the servo mechanism on the pump, with only limited physical effort
5. No-Load Motor Start-up Torque Motor
Since the motor of the hydraulic pump can be started in the no-load
FP
condition, the emergency generator can be designed just that much
smaller in capacity

INFORMATION OF YOOWON INDUSTRIES LTD. ¯ 5

Pump Control Type (T series)

Hydraulic pump control mechanism Hydraulic pumps

1) Pump structure is simple and easy to assemble, because quantity of
main parts is greatly reduced.
Servo cylinder Servo piston 2) Solid cam of high rigidity and strength is introduced, so the unit has
epoch-making light-weight structure among all variable pumps.
3) The unit reduces the noise in a wide range of running conditions.
Torque motor unit Centering spring
① Main shaft
② Cylinder barrel
③③Piston
Servo valve ④ Slipper pad
Mechanical lever
for emergency steering ⑤ Valve Plate
⑥ Casing
⑦ Front plate
⑧ End plate
Servo cylinder
⑨ Cam bearing
Servo piston 13 ⑩ Solid cam
Auxiliary pump
3 ⑪ Piston for servo controller
11 ⑫ Link
⑬ Cylinder for servo controller
Oil tank 12 ⑭ Auxiliary pump
Hydraulic pump 4
Pilot relief valve
Boost relief valve

7 9 10 6 2 5 8 14

6 ¯ INFORMATION OF YOOWON INDUSTRIES LTD.

 YOOWON-MITSUBISHI Electro-Hydraulic Steering Gears

Torque motor control system Yoowon-Mitsubishi

torque motor control steering system

Steering stand Gyrocompass

No. 2
No. 1
Products of auto-pilot maker Wheel house
No. 2 No. 1 Builder's furnish equipment

Amplifier Steering gear room

A Repeat A
Steering stand
Torque motor back unit

TM FB TM FB No 1 Repeat back unit

No. 1
Servo controller MS MS No 2 Control box
M P AP M P AP No 2
Motor
Janney pump
No. 1 Torque motor unit

Mechanical lever No. 1 Steering

for emergency steering gear motor starter
No 2
No. 2 Torque motor unit
TV SV SV TV

Safety valve Repeat back unit

FB FB
Transfer valve

Torque motor control (single loop) Operation

1. Excellent response and Energy-saving Bridge Remote Control
2. Simple construction and compact design The rudder angle electric command signal issued from the steering stand is
3. High reliability amplified by the amplifier (A) and transmitted to the torque motor (TM). The
4. Greater freedom of Arrangement and ease of outfitting torque motor then drives the hydraulic pump control mechanical servo (MS)
5. Ease of control in emergency steerings only as much as directed by the command signal so that the tilting plate of
6. No-load motor start-up the hydraulic pump (P) will be inclined accordingly for discharge of the
7. Complete dual control system required quantity of working oil. The working oil pressure thereby exerted
causes the rudder to turn, and with feedback signal from the rudder tiller
transmitted from the feedback detector(FB) to the steering stand
Emergency signaling the rudder reaching the angle directed by the
Control
command signal, the torque motor drives the mechanical
RUDDER Acturator Janney
Pump
Servo
Controller
Torque
motor
Control
Box
Steering
stand
servo back to the neutral position(0 deg).
Feedback Feedback Consequently the hydraulic pump tilting plate also will
Transmitter
return to the uninclined neutral position where the oil suction
and discharge no longer take place, and the rudder therefore will be
held at the angle to which it has been turned.
Local Control by the means of Mechanical Handle
MODELS OF AUTO-PILOT FOR TORQUE MOTOR CONTROL
In the local "HAND" control mode, it is not by the electric command signal
Maker Models with Mitsubishi jnney pump but by direct manipulation of the mechanical handle on the hydraulic pump
PR-8406-DM, PR-8407-DM control mechanical servo that the hydraulic pump discharge is controlled.
Tokyo keiki Co,. Ltd. Since it is non-follow-up steering in this instance, releasing the mechanical
PR-8506-DM, PR-8507-DM handle upon turning the rudder to the desired angle will cause the
Yokogawa Denshikiki PT100-Y (or Y3, Y4) mechanical servo centering function to automatically bring the hydraulic
Co,. Ltd. pump tilting plate back to the neutral position so that the rudder will be kept
PT200-Y (or Y3, Y4)
at the desired angle.

INFORMATION OF YOOWON INDUSTRIES LTD. ¯ 7

 YDFT-TYPE
(for 35 deg. )
B A
Tiller R.A.Transimitter
Cylinder

D
Out of Scope of Supply

C
Mechanial lever Mechanial lever

C
E
Torque motor
Repeat back unit Janney pump Torque motor
Valve block

Oil tank
Elec.motor

G
F
Specifications & Dimensions
Type YDFT-60 YDFT-80 YDFT-125 YDFT-170
Torque at maximum working oil t-m 52 62 74 91 105 126 140 172
pressure kN-m 510 608 726 892 1030 1236 1373 1687
Rudder turning speed deg/sec 65/28
Normal tiller radius mm 470 520 580 650
Diameter of ram mm 170 195 220 240
kgf/cm2 185 220 180 220 180 215 180 220
Maximum working oil pressure
Mpa 18.1 21.6 17.6 21.6 17.6 21.1 17.6 21.6
Safety valve pressure kgf/cm2 232 275 225 275 225 269 225 275
(Design pressure) Mpa 22.7 27 22.1 27 22.1 26.4 22.1 27
Output x Number kW 15 × 2 18.5 × 2 22 × 2 25 × 2 30 × 2 37 × 2 45 × 2 50 × 2
With main and Motor Number of revelations rpm 1800
stand-by pumps Overload %/sec 100/60
Pump Type x Number 06V-FH2B-MK × 2 1V-FH2B-MK × 2
Output x Number kW 11 × 2 11 × 2 15 × 2 15 × 2 18.5 × 2 22 × 2 25 × 2
Without Motor Number of revelations rpm 1800
stand-by pump Overload %/sec 100/60
Pump Type x Number 06V-FH2B-MK × 2
A 1678 1931 2164 2344
B 1826 1838 2011 2213
C 470 520 580 650
Dimensions mm D 941 991 1121 1191
E 1460 1510 1585 1660
F 190 205 220 240
G 1240 1250 1375 1390
Note : The above list is complied with rudder turning angle ±35 deg, and electric source of 60Hz. Steering gear for special particulars are available with us under high workmanship design.

8 ¯ INFORMATION OF YOOWON INDUSTRIES LTD.

 YOOWON-MITSUBISHI Electro-Hydraulic Steering Gears

YDFT-TYPE B A

(for 35 deg. )
R.A.Transmitter
Tiller

Cylinder

D
Out of Scope of Supply

C
Mechanial lever Mechanial lever

E
Torque motor

Valve block REPEAT BACK UNIT Janney pump Torque motor

Oil tank
Elec.motor

G
F
Specifications & Dimensions
Type YDFT-200 YDFT-250 YDFT-300 YDFT-335
Torque at maximum working oil t-m 207 244 291 351
pressure kN-m 2030 2393 2854 3442
Rudder turning speed deg/sec 65/28
Normal tiller radius mm 715 730 780 850
Diameter of ram mm 250 270 285 300
kgf/cm2 220 220 220 220
Maximum working oil pressure
Mpa 21.6 21.6 21.6 21.6
Safety valve pressure kgf/cm2 275 275 275 275
(Design pressure) Mpa 27,0 27 27 27
Output x Number kW 55 × 2 75 × 2 80 × 2 90 × 2
With main and Motor Number of revelations rpm 1200
stand-by pumps Overload %/sec 100/60
Pump Type x Number 3V-FH2B-MK X 2
Output x Number kW 30 × 2 37 × 2 45 × 2 50 × 2
Without Motor Number of revelations rpm 1800
stand-by pump Overload %/sec 100/60
Pump Type x Number 06V-FH2B-MK × 2 1V-FH2B-MK × 2
A 2533 2637 2807 2982
B 2386 2505 2655 2842
C 715 730 780 850
Dimensions mm D 1375 1392 1442 1512
E 1872 1887 1937 2007
F 255 260 275 285
G 1510 1530 1540 1550
Note : The above list is complied with rudder turning angle ±35 deg, and electric source of 60Hz. Steering gear for special particulars are available with us under high workmanship design.

INFORMATION OF YOOWON INDUSTRIES LTD. ¯ 9

 YDFT-TYPE B A

(for 35 deg. ) Tiller

Mechanial lever

Cylinder

D
Out of Scope of Supply
R.A.Transimitter

C
Mechanial lever

C
E
Repeat back unit

Oil tank Valve block Torque motor Elec.motor

Janney pump
G
F

Specifications & Dimensions

Type YDFT-400 YDFT-475 YDFT-530
Torque at maximum working oil t-m 363 400 440 485 560
pressure kN-m 3560 3923 4315 4756 5492
Rudder turning speed deg/sec 65/28
Normal tiller radius mm 900 940 970
Diameter of ram mm 315 335 355
kgf/cm2 195 215 200 220 220
Maximum working oil pressure
Mpa 19.1 21.2 19.6 21.6 21.6
Safety valve pressure kgf/cm2 244 269 250 275 275
(Design pressure) Mpa 23.9 26.4 24.5 27 27
Output x Number kW 110 × 2 110 × 2 132 × 2 150 × 2 160 × 2
With main and Motor Number of revelations rpm 1200
stand-by pumps Overload %/sec 100/60
Pump Type x Number 6V-FH2B-MK × 2
Output x Number kW 50 × 2 55 × 2 63 × 2 75 × 2 80 × 2
Without Motor Number of revelations rpm 1200
stand-by pump Overload %/sec 100/60
Pump Type x Number 3V-FH2B-MK × 2
A 3176 3455 3595
B 3155 3205 3255
C 900 940 970
Dimensions mm D 1645 1685 1715
E 2060 2110 2160
F 260 275 285
G 1695 1700 1710
Note : The above list is complied with rudder turning angle ±35 deg, and electric source of 60Hz. Steering gear for special particulars are available with us under high workmanship design.

10 ¯ INFORMATION OF YOOWON INDUSTRIES LTD.

 YOOWON-MITSUBISHI Electro-Hydraulic Steering Gears

Mechanical lever

YDFT-TYPE
(for 35 deg. )

DRP1P2
Tiller

Cylinder

D
Out of Scope of Supply

C
R.A.Transimitter

C
E
DRP1P2
Repeat back unit Valve block
B A
Oil tank
Torque motor Elec.motor
Janney pump
G
F

Specifications & Dimensions

Type YDFT-660 YDFT-760 YDFT-870 YDFT-1000 YDFT-1150
Torque at maximum working oil t-m 660 768 872 933 1000 1153
pressure kN-m 6473 7532 8552 9150 9807 11307
Rudder turning speed deg/sec 65/28
Normal tiller radius mm 1050 1100 1130 1180 1240
Diameter of ram mm 370 390 410 430 450
kgf/cm2 220 220 220 205 220 220
Maximum working oil pressure
Mpa 21.6 21.6 21.6 20.1 21.6 21.6
Safety valve pressure kgf/cm2 275 275 275 256 275 275
(Design pressure) Mpa 27 27 27.6 25.1 27 27
Output x Number kW 90 × 4 110 × 4 125 × 4 132 × 4 150 × 4 160 × 4
With main and Motor Number of revelations rpm 1200
stand-by pumps Overload %/sec 100/60
Pump Type x Number 3V-FH2B-MK × 4 6V-FH2B-MK × 4
Output x Number kW 90 × 2 110 × 2 125 × 2 132 × 2 150 × 2 160 × 2
Without Motor Number of revelations rpm 1200
stand-by pump Overload %/sec 100/60
Pump Type x Number 3V-FH2B-MK × 2 6V-FH2B-MK × 2
A 3767 3925 4142 4282 4443
B 3454 3612 3717 3857 4018
C 1050 1100 1130 1180 1240
Dimensions mm D 3272 3553 3583 3633 3693
E 2397 2620 2650 2700 2760
F 325 335 345 355 370
G 2048 2098 2098 2098 2098
Note : The above list is complied with rudder turning angle ±35 deg, and electric source of 60Hz. Steering gear for special particulars are available with us under high workmanship design.

INFORMATION OF YOOWON INDUSTRIES LTD. ¯ 11

 YDFT-TYPE
(for 45 deg. )
B A
Tiller R.A.Transimitter
Cylinder

D
Out of Scope of Supply

C
Mechanial lever Mechanial lever

C
E
Torque motor
Repeat back unit Janney pump Torque motor
Valve block

Oil tank
Elec.motor

G
G

F
Specifications & Dimensions

Type YDFT-60 YDFT-80 YDFT-125 YDFT-170

Torque at maximum working oil t-m 44 65 94 127
pressure kN-m 431.5 637.5 922 1245.5
Rudder turning speed deg/sec 65/28
Normal tiller radius mm 430 480 550 590
Diameter of ram mm 170 195 220 240
kgf/cm2 170 170 170 180
Maximum working oil pressure
Mpa 16.7 16.7 16.7 17.7
Safety valve pressure kgf/cm2 213 213 213 225
(Design pressure) Mpa 20.9 20.9 20.9 22.1
Output x Number kW 15 × 2 18.5 × 2 30 × 2 37 × 2
With main and Motor Number of revelations rpm 1800
stand-by pumps Overload %/sec 100/60
Pump Type x Number 06V-FH2B-MK × 2 1V-FH2B-MK × 2
A 1678 1931 2164 2754
B 1826 1838 2011 2641
C 430 480 550 590
Dimensions mm D 941 991 1121 1131
E 1420 1470 1560 1600
F 190 205 220 240
G 1240 1250 1375 1390

Note : The above list is complied with rudder turning angle ±45 deg, and electric source of 60Hz. Steering gear for special particulars are available with us under high workmanship design.

12 ¯ INFORMATION OF YOOWON INDUSTRIES LTD.

 YOOWON-MITSUBISHI Electro-Hydraulic Steering Gears

YDFT-TYPE
(for 45 deg. ) B
Tiller R.A.Transimitter
A

Cylinder

D
Out of Scope of Supply

C
Mechanial
lever Mechanial
lever

C
E
Torque motor

Valve block Repeat back unit Janney pump Torque motor

Oil tank
Elec.motor

G
F
Specifications & Dimensions

Type YDFT-200 YDFT-250 YDFT-300 YDFT-335

Torque at maximum working oil t-m 172 207 244 295
pressure kN-m 1687 2030 2393 2893
Rudder turning speed deg/sec 65/28
Normal tiller radius mm 660 680 720 785
Diameter of ram mm 250 270 285 300
kgf/cm2 200 200 200 200
Maximum working oil pressure
Mpa 19.6 19.6 19.6 19.6
Safety valve pressure kgf/cm2 250 250 250 250
(Design pressure) Mpa 24.5 24.5 24.5 24.5
Output x Number kW 50 × 2 60 × 2 75 × 2 80 × 2
With main and Motor Number of revelations rpm 1200
stand-by pumps Overload %/sec 100/60
Pump Type x Number 3V-FH2B-MK × 2
A 3030 3150 3329 3556
B 2883 3013 3187 3419
C 660 680 720 785
Dimensions mm D 1322 1342 1382 1447
E 1817 1837 1877 1942
F 255 260 275 285
G 1510 1530 1540 1550

Note : The above list is complied with rudder turning angle ±45 deg, and electric source of 60Hz. Steering gear for special particulars are available with us under high workmanship design.

INFORMATION OF YOOWON INDUSTRIES LTD. ¯ 13

 YDFT-TYPE
(for 45 deg. ) B
Tiller
A

Mechanial lever

Cylinder

D
Out of Scope of Supply R.A.Transimitter

C
Mechanial lever

E
Repeat back unit

Oil tank Torque motor Elec.motor

Valve block
Janney pump
G
F

Specifications & Dimensions

Type YDFT-4O0 YDFT-475 YDFT-530

Torque at maximum working oil t-m 350 403 492
pressure kN-m 3432.5 3952 4825
Rudder turning speed deg/sec 65/28
Normal tiller radius mm 845 860 890
Diameter of ram mm 315 335 355
kgf/cm2 200 200 210
Maximum working oil pressure
Mpa 19.6 19.6 20.6
Safety valve pressure kgf/cm2 250 250 263
(Design pressure) Mpa 24.5 24.5 25.8
Output x Number kW 110 × 2 125 × 2 150 × 2
With main and Motor Number of revelations rpm 1200
stand-by pumps Overload %/sec 100/60
Pump Type x Number 6V-FH2B-MK × 2
A 3669 3754 3916
B 3669 3764 3916
C 845 860 890
Dimensions mm D 1590 1605 1635
E 2060 2160 2160
F 260 275 285
G 1695 1700 1710
Note : The above list is complied with rudder turning angle ±45 deg, and electric source of 60Hz. Steering gear for special particulars are available with us under high workmanship design.

14 ¯ INFORMATION OF YOOWON INDUSTRIES LTD.

 YOOWON-MITSUBISHI Electro-Hydraulic Steering Gears

YDFT-TYPE
Mechanical lever

(for 45 deg. )
Tiller

DR P1 P2
Cylinder

D
Out of Scope of Supply

C
R.A.Transimitter

C
E
DR P1 P2
Repeat back unit Valve block

B A
Oil tank
Torque motor Elec.motor
Janney pump
G
F

Specifications & Dimensions

Type YDFT-400 YDFT-475 YDFT-530 YDFT-660 YDFT-760 YDFT-870 YDFT-1000

Torque at maximum working oil t-m 350 403 492 560 650 751 860
pressure kN-m 3432.5 3952 4825 5492 6375 7365 8384
Rudder turning speed deg/sec 65/28
Normal tiller radius mm 845 860 890 930 975 1020 1060
Diameter of ram mm 315 335 355 370 390 410 430
kgf/cm2 210 210 210 210 210 210 210
Maximum working oil pressure
Mpa 20.6 20.6 20.6 20.6 20.6 20.6 20.3
Safety valve pressure kgf/cm2 263 263 263 263 263 263 263
(Design pressure) Mpa 25.8 25.8 25.8 25.8 25.8 25.8 25.8
Output x Number kW 55 × 4 55 × 4 75 × 4 75 × 4 85 × 4 110 × 4 125 × 4
With main and Motor Number of revelations rpm 1200
stand-by pumps Overload %/sec 100/60
Pump Type x Number 3V-FH2B-MK x 4 6V-FH2B-MK x 4
A 4000 4095 4247 4390 4565 4853 5000
B 3669 3764 3916 4067 4252 4424 4575
C 845 860 890 930 975 1020 1060
Dimensions mm D 3037 3052 3082 3182 3227 3463 3503
E 2162 2177 2207 2277 2322 2497 2537
F 285 300 315 325 335 345 355
G 2003 2018 2033 2048 2068 2088 2098
Note : The above list is complied with rudder turning angle ±45 deg, and electric source of 60Hz. Steering gear for special particulars are available with us under high workmanship design.

INFORMATION OF YOOWON INDUSTRIES LTD. ¯ 15

Valve Control Type Hydraulic diagram
(C series) No.2 SAFETY VALVE
No.2 CHECK VALVE
No.2 THROTTLE & BACK-UP VALVE
No.2 SOLENOID VALVE No.2 VALVE BLOCK
No.2 CYLINDER
No.2 LINE FILTER
LEVEL SWITCH FOR
C LOW LEVEL ALARM

M No.2 PUMP
D
No.2 MOTOR

No.1 THROTTLE & BACK-UP VALVE No.1 VALVE BLOCK

No.1 LINE FILTER
STOP VALVE A LEVEL SWITCH FOR

YSFC
LOW LEVEL ALARM

M
B No.1 PUMP
No.1 CYLINDER
No.1 MOTOR
No.1 SAFETY VALVE No.1 SOLENOID VALVE No.1 CHECK VALVE

YSFC Type Electro-Hydraulic steering gears

SFC-type steering gears satisfy IMO regulations. They allow the source of any failure in pipes or a power unit to be easily
isolated, so that steering capability can be rapidly regained. The rudder actuator is of the ram-cylinder type, and constant
delivery hydraulic pumps are fitted. A single loop direct control system with solenoid valves ensures superior
responsiveness and energy savings as well. An optional auto. isolation system is available for vessels such as oil tankers.

Merits of YSFC type

1. High Reliability and Durability
The ram cylinder type actuator and the simply designed vane type
Mechanism of Solenoid Valve Control
constant delivery pump are capable of withstanding high pressure, and
with Constant Delivery Pump will prove to be exceptionally durable.
2. Excellent Response
Response curve
The solenoid valve control
system enables the steering 100% A B
Rudder Turning speed

gear to respond more quickly

Repeat Back Unit to the steering command
from steering stand than the
Steering Gear
mechanical link system
hitherto employed, especially 4º~ 6º
Solenoid Line Filter
Controlled in fine rudder angle. Commanded steering angle
Valve
3. Substantial Economic Advantage
Pump The use of direct control system with solenoid valves eliminates the
Oil Tank
need for such equipment as an auto-pilot power unit or hunting lever.
The rudder limiter system satisfies IACS regulations. A timer relay
(builder's furnish) may be installed in the starter motor circuit for a easy
Auto-pilot comparison no-load start-up f
Maker SFC-Type 4. Simple Design and Compact configuration
Tokyo Keiki Co., Ltd. PR-8000-E
All hydraulic equipment is installed on the oil tank, and external piping
Yokogawa Denshikiki Co., Ltd. PT-100-N2F, PT-200-N2F has minimized for a simple, compact configuration.

16 ¯ INFORMATION OF YOOWON INDUSTRIES LTD.

 YOOWON-MITSUBISHI Electro-Hydraulic Steering Gears

Feed back unit

YSFC-TYPE
Rudder angle transmitter

Tiller

Motor
Out of Scope of Supply

C
B
Cylinder

D
Pump unit and oil tank

Valve block
A A

Oil tank

F
E
Specifications & Dimensions

Type YSFC-20 YSFC-30 YSFC-40 YSFC-50 YSFC-60 YSFC-80

Torque at maximum working oil t-m 23 32 45 53 63 72 86

pressure kN-m 226 314 441 520 618 706 844
Rudder turning speed deg/sec 65/28
Normal tiller radius mm 430 470 520 560 650 650
Diameter of ram mm 155 170 195 205 220 240
kgf/cm2 210 220 220 215 240 185 220
Maximum working pressure
Mpa 20.6 21.6 21.6 21.1 21.1 18.1 21.6
Safety valve pressure kgf/cm2 263 275 275 269 269 232 275
(Design pressure) Mpa 25.8 27 27 26.4 26.4 22.7 27
Output kW 7.5 × 2 11 × 2 15(7.5) × 2 18.5(11) × 2 22(11) × 2 25(11) × 2
Motor Number of revelations rpm 1,800
Overload %/sec 100/60
Pump Type x Number T6C-005 × 2 T6C-006 × 2 T6C-010 × 2 (T6C-005 × 2) T6C-014 × 2 (T6C-006 × 2) T6C-017 × 2 (T6C-008 × 2)
A 1520 1685 1845 1945 2020 2225
B 430 470 520 560 580 650
C 675 740 815 880 910 1015
Dimensions mm
D 785 815 815 815 1000 1000
E 175 190 205 215 220 240
F 1020 1030 1040 1050 1200 1220
Note : The above list is complied with rudder turning angle ±35 deg, and electric source of 60Hz. Steering gear for special particulars are available with us under high workmanship design.

INFORMATION OF YOOWON INDUSTRIES LTD. ¯ 17

Service Networks of YoonWon-Mitsubishi
Electro-hydraulic Steering Gear

● ●Moscow
London ●
Frederikssund

●Istanbul Busan Tokyo

Beijing●
●
Athens ●● ●
Shanghai● ● Shimonoseki
●Doha Taipei ● Nagasaki
●New Delhi ●
Hong Kong
●Manila
Samutprakan●

Singapore●

Jakarta●

MITSUBISHI HEAVY INDUSTRIES, LTD.

HEAD OFFICE
16-5, Konan 2-chome, Minato-ku, Tokyo 108-8215, Japan
Phone : 81-3-6716-3111 Telefax : 81-3-6716-5800
NAGASAKI SHIPYARD & MACHINERY WORKS ●Melbourne
1-1, Akunoura-machi, Nagasaki 850-8610, Japan
Phone : 81-95-828-412 Telefax : 81-95-862-8320

SERVICE CENTER OVERSEAS OFFICES OVERSEAS REPRESENTATIVES

MHI MARINE ENGINEERING, LTD. (Overseas) BEIJING LIAISON OFFICE SOUTH AMERICA REPHESENTATIVE
Tokyo Overseas Division & Engineering Dept. 34-6, Phone : 86-10-6505-4321 Telefax : 86-10-6505-1222 Phone : 55-11-3884-8011 Telefax : 55-11-3885-9040
Shiba 5-chome, Minato-ku, Tokyo 108-0014, Japan JAKARTA LIAISON OffICE MOSCOW REPRESENIATBVE
Phone : 81-3-3798-5941 Telefax : 81-3-3798-5943 Phone : 62-21-515-3221 Telefax : 62-21-515-3219 Phone : 7-095-937-8435 Telefax : 7-095-937-8433
SAMAYU CO,. LTD. (Domestic) TAIPEI LIAISON OFFICE ISTANBUL REPRESENTATRVE
6-58, Chofu-Ohgi-machi, Shimonoseki-city, 752-0927, Japan Phone : 10-886-2-2700-3466 Telefax : 10-886-2-2700-3499 Phone : 90-212-279-2535 Telefax : 90-212-279-2603
Phone : 81-832-48-3411 Telefax : 81-832-48-2771
NEW DELHI LIAISON OFFICE BUSAN REPRESENTATIVE
Phone : 011-5102-1234 Telefax : 011-5102-5150 Phone : 82-51-442-0801 Telefax : 82-51-462-7317
HO CHI MINH CITY REPRESENTATIVE
Phone : 84-8-8243279 Telefax : 84-8-8242874

18 ¯ INFORMATION OF YOOWON INDUSTRIES LTD.

 YOOWON-MITSUBISHI Electro-Hydraulic Steering Gears

Newport News●●New York

Los Angeles● Houston●

YOOWON INDUSTRIES LTD.

●Sang Paulo 566-10, Sinpyung-Dong, Saha-Gu, Busan, Korea
Phone : +82-51-205-8541, +82-51-719-6600
Telefax : +82-51-205-8540
http://www.yoowonind.com
Email: business@yoowonind.com

OVERSEAS SUBSIDIARY COMPANYS COLLABORATION COMPANYS FOR REPAIR COLLABORATION COMPANYS

MITSUBISHI HEAVY INDUSTRIES AMERICA, INC. (MHIA) TURBO MARINE (Denmark) Singapore Branch
Headquarters_Phone : 1-212-969-9000 Telefax : 1-212-262-3301 Phone : 45-4738-6501 Telefax : 45-4738-6501 Phone : 65-338-1100 Telefax : 65-338-6685
Los Angeles Office_Phone : 1-949-856-8500 Telefax : 1-949-856-4469 KINOSHITA MARINE SERVICES (Singapore) Doha Office
Houston Office_phone : 1-713-652-9224 Telefax : 1-713-652-9305 Phone : 65-6383-0268 Telefax : 65-6383-0610 Phone : 974-621710 Telefax : 974-621394
MITSUBISHI HEAVY INDUSTRIES EUROPE, LTD. (MHIE) DAIKI (Singapore) Mitsubishi Hellas (Greece)
Phone : 44-20-7842-8100 Telefax : 44-20-7842-8101 Phone : 65-6863-2856 Telefax : 65-6863-2876 Phone : 30-1-32-48115 Telefax : 30-1-324-8586
MITSUBISHI HEAVY INDUSTRIES, (HONG KONG) LTD. (MHIH) FUJI TRADlNG (Arnerica), INC.
Phone : 852-2525-5202 Telefax : 852-2868-1469 Phone : 1-757-873-4110 Telefax : 1-757-873-4123
MITSUBISHI HEAVY INDUSTRIES(THAILAND) LTD. (MHIT)
Phone : 66-2-751-9800 Telefax : 66-2-751-9801
MITSUBISHI HEAVY INDUSTRIES PHILIPPINES INC. (MHIP)
Phone : 63-2-889-3500 Telefax : 63-2-889-3491
MITSUBISHI HEAVY INDUSTRIES AUSTRALIA, PTY. LTD. (MHIAU)
Phone : 61-3-9670-9799 Telefax : 61-3-9670-4197
MITSUBISHI HEAVY INDUSTRIES(SHANGHAI) CO., LTD. (MHISHl
Phone : 86-21-6841-3030 Telefax : 86-21-6841-5222
MITSUBISHI HEAVY INDUSTRIES DE MEXICO, S.A. DE C.V. (MHIMEX)
Phone : 52-55-5511-4193 Telefax : 52-55-5511-3425

INFORMATION OF YOOWON INDUSTRIES LTD. ¯ 19

 No.1 & No.2 Factory

No.3 Factory

YOOWON INDUSTRIES LTD.

Head Office and Factory
566-10, Sinpyung-Dong, Saha-Gu, Busan, Korea
TEL : +82-51-205-8541, +82-51-719-6600
FAX : +82-51-205-8540
http://www.yoowonind.com
YOOWON
Email: business@yoowonind.com

YOOWON'S PRODUCTS
■Piston type steering gear
■Rapson slide ram steering gear
■Rotary vane type steering gear
■Deck machinery
■Auto filter & Fine filter

CAT. No. MHI / yw0910 Rev.2