7.

5–40 HP | RECIPROCATING BARE PUMPS

A-Series
 GARDNER DENVER | A-SERIES

Rugged Durability
Premium Performance

A Winning Combination
Gardner Denver compressors are proven units,
known for their reliability over decades of use.
We know our products and understand how they
operate in many different operating environments.
No matter the application, Gardner Denver gets
the job done.

2
Accessibility & Reliability
Gardner Denver A-Series reputation is built on quality,
reliability and accessibility to all components. With
a broad range of models, A-Series compressors are
designed to provide optimum performance in a wide
variety of operations. Regardless of the application,
Gardner Denver gets the job done.

3
 Meet the A-Series

The Gardner Denver APL and APO are single-stage, two-

cylinder, pressure-lubricated compressors equipped with a
two-groove, 17 inch sheave for belt-driven applications. The
APL and APO have an integrated cooling fan built into the
cast iron sheave for maximum cooling.

The Gardner Denver ATLE6-GD is a single-stage, two-cylinder,

pressure-lubricated compressor that is equipped with an
SAE#3 bell housing flange for direct engine mounting and
remote site operation.

The AVLEK is a single-stage vacuum pump, AVLAN is a single-

stage booster and the AVLAV is a two-stage compressor.
All A-Series compressors are designed to provide optimum
performance in a wide variety of operations.

The ANP is ideal for natural gas gathering applications and is

available in both single- and two-stage models.

4
Air Compressors,
Vacuum & Boosters

AC UU M 350
V psig

E
28"

R
RE
SSU
P
Hg

UP TO 40 HP

FEATURES
■■ ASME pressure relief valve protects the intercooler ■■ Suctionunloading valves (where applicable) provide
and first stage from over pressure. loadless starting and stopping as well as quick
response to capacity demands.
■■ Tri-Metal
insert bearings are two-piece for quick
and easy replacement. Counterbalanced crankshaft ■■ Deep-finned cylinders and heads quickly dissipate
assures smooth operation. the head of compression.

■■ Replaceable piston pin bearings are very economical ■■ Crankshaft ends are supported by large tapered
when replacement becomes necessary. The roller bearings for smooth operation and long life.
generously sized intercooler provides maximum
■■ Oil
pressure gauge assures the operator of
cooling for the most efficient operation and low
power consumption. (AVLAVCAA-GD only) lubrication system integrity.

■■ Thecylinders and crankcases are built of industrial

strength cast iron materials.

5
 Reciprocating
Service

Options
Benefit

Design Reliable
Dependable

Solution
Confidence

Technology
Durability Package
Value

Convenience
Competitive
Performance
Longevity

6
Sales & Service Distributors
Across America
An Extensive Network
By leveraging the extensive network of Gardner Denver
factory-trained authorized local distributors, your sales, service
and technical support needs can be handled quickly and easily.

To find a distributor visit:

gardnerdenver.com/gdproducts

7
 A–Series Bares
Compressor designs optimized for premium service in the following applications:

■■ Bulk Material Handling ■■ Petroleum Refineries

■■ Engine Starting ■■ Industrial Spraying
■■ Well Head Servicing

DIMENSIONS

MODEL
BORE
STROKE
SUCTION &
DISCHARGE
DIMENSIONS
WEIGHT
28" HG–60 PSIG
DIAMETER L×W×H
PIPE SIZE NPT (0.95–4.1 BAR)
in 7.875/7.875 3 3 41 × 29 × 30 lbs 750
APL CONTINUOUS OPERATION
mm 200 76 NA 1041 × 737 × 762 kg 340

in 7.875/7.875 4.5 3 41 × 29 × 30 lbs 750 5–30 HP (3.7–22.4 KW)

APO
mm 200 114 NA 1041 × 737 × 762 kg 340

COMPRESSOR SPECIFICATIONS VACUUM SPECIFICATIONS

SPEED PRESSURE CAPACITY SPEED CAPACITY VAC. - HG
MODEL MODEL
HP/KW PSIG BAR CFM M3/MIN HP/KW CFM M3/MIN IN MM

20 1.4 113 3.2 120 3.4 5 127

30 2.1 105 3.0 114 3.2 10 254

855
APL 15/11.2
40 2.8 98 2.8
105 3.0 15 381
780
50 3.4 90 2.5 APL 5/3.7
92 2.6 20 508
60 4.1 83 3.1
60 1.7 25 635
20 1.4 145 4.1 APLGAA-GD, APLGBA-GD,
30 2.1 134 3.8
NA NA 28 711 APLHAA-GD, APLHBA-GD
698 167 4.7 5 127 Single-Stage Compressor
APO 20/14.9
40 2.8 125 3.5

50 3.4 117 3.3 164 4.6 10 254

60 4.1 110 3.1 157 4.4 15 381

739
20 1.4 181 5.1
APO 7.5/5.6
145 4.1 20 508
30 2.1 169 4.8
99 2.8 25 635
885
APO 25/18.6
40 2.8 158 4.5
NA NA 28 711
50 3.4 148 4.2
198 5.6 5 127
60 4.1 138 3.9
193 5.5 10 254
20 1.4 218 6.1

30 2.1 205 5.8 185 5.2 15 381

937
1072
APO 10/7.5
APO 30/22.4
40 2.8 192 5.4 169 4.8 20 508
APOGAA-GD, APOGBA-GD,
50 3.4 180 5.1 117 3.5 25 635
APOHAA-GD, APOHBA-GD
60 4.1 168 4.8 NA NA 28 711
Single-Stage Compressor

8
DIMENSIONS
SUCTION &
BORE DISCHARGE DIMENSIONS
MODEL STROKE WEIGHT
DIAMETER PIPE SIZE L×W×H
NPT

in 7.875 4.50 3 41 × 29 × 30 lbs 750

ATLE6-GD
mm 200 114 NA 1041 × 737 × 762 kg 340
ATLE6-GD
Single-Stage Compressor
SPECIFICATIONS
PISTON @ 30 PSIG – 2.07 BARS
OIL MAXIMUM ■■ Pressure Lubricated
DISPLACE-
SPEED CAPACITY PRESSURE DISCHARGE FLOW
MENT
AIR TEMP
BHP ■■ SAE #3 Bell Housing
MODEL DUTY
RPM CFM QTS PSIG CYCLE CFM HP ■■ Low Pressure Bare
LTRS BAR °F
M3/MIN M3/MIN KW
°C ■■ Factory Fill with AEON 500

262 9 30 400 Inter- 180 29 ■■ Single-Stage, 2 Cylinders

ATLE6-GD 1550
7.8 8.5 2.07 204 mittent 5.1 22

DIMENSIONS
SUCTION &
BORE DISCHARGE DIMENSIONS
MODEL STROKE DISCHARGE WEIGHT
DIAMETER PIPE SIZE L×W×H
NPT
■■ Single-Stage
Vacuum
in 8.00/4.25 4.50 2 2 40 × 27 × 33 lbs 680
AVLAVCAA-GD and Booster Bare
mm 203/108 114 NA NA 1016 × 686 × 838 kg 308
■■ Two-Stage Air Compressor Bare
in 4.25/4.25 4.50 3 2 38 × 27 × 33 lbs 600
AVLANCAA-GD
mm 108 114 NA NA 965 × 686 × 838 kg 272 ■■ Pressure Lubricated
in 7.50/7.50 3 3 3 38 × 27 × 33 lbs 600 ■■ Factory Fill with AEON 500
AVLEKCAA-GD
mm 191 76 NA NA 965 × 686 × 838 kg 272
■■ Cast Iron Construction

COMPRESSOR SPECIFICATIONS
PRESSURE CAPACITY
MODEL HP/KW SPEED
PSIG BAR CFM M3/MIN
25" HG–350 PSIG
968 100 6.90 101 2.86
(6.9–17.24 BAR
922 125 8.62 96.5 2.73
25/19
830 175 12.07 85 2.41 CONTINUOUS
784 250 17.24 78 2.21 OPERATION
AVLAVCAA-GD
1106 100 6.90 116 3.29
7.5–40 HP
1014 125 8.62 105 2.97
30/22 (5.6–30 KW)
968 175 12.07 99 2.80 AVLANCAA-GD
876 250 17.24 87 2.46 Single-Stage Booster
Suction Pressures: 1–140 psig
Discharge Pressure: Up to 350 psig
AVLANCAA-GD 40/30
Consult factory for sizing
& technical information.

VACUUM SPECIFICATIONS
SPEED CAPACITY VAC. - HG
MODEL
HP/KW CFM M3/MIN IN MM

169 4.79 5 127

160 4.53 10 254

870
AVLEKCAA-GD 7.5–10/ 146 4.13 15 381
5.6–7.5
122 3.46 20 508
AVLEKCAA-GD AVLAVCAA-GD
62 1.75 25 635 Single-Stage Vacuum Pump Two-Stage Compressor
9
 A–Series Natural Gas Bares

ANPEAA-GD, ANPHAA-GD
Ideal for use in natural gas gathering applications

■■ Concentric Ring Type Valves ■■ Threaded Crankcase Vent Connection

■■ AISI 420 Stainless Steel Discs & Springs ■■ Counter Balanced Crankshaft
■■ Drive Sheave with Turbo Fins ■■ Cast-Iron Construction
ANPEAA-GD ■■ Viton O-Rings ■■ Factory Fill with AEON 500

COMPRESSOR SPECIFICATIONS
DESCRIPTION ANPHAA-GD ANPEAA-GD

Compressor HP Range 40 Max 40 Max

Rotation (drive end) Clockwise Clockwise

Valves Plain Plain

Bore & Stroke (inches) 7.87 & 7.87 × 4.5 4.25 & 4.25 × 4.5

Speed Range (RPM) 550–1000 550–1000

Number Cylinders 2 2

Weight (pounds) 750 600

Dimensions (inches) L 40.3 W 28.78 H 29.9 L 33.9 W 24.34 H 26.8

Maximum Pressure 60 PSIG 250 PSIG

ANPHAA-GD

10
ANPHAA PERFORMANCE @ 968 RPM
DISCHARGE PSIG
MSCFD
10 15 20 25 30 35 40 45 50 55 60
-10 70.4 66.3 62.3 58.5
-5 180.1 172.7 165.5 158.4 150.7 146.5 142.3 138.2 134.2 130.2 126.3
0 292.7 284.8 277.2 269.6 262.3 255.0 247.9 240.8 233.8 226.8 222.5
5 406.0 397.8 389.8 381.9 374.2 366.6 359.2 351.8 344.5 337.3 330.2
SUCTION PSIG

10 511.3 502.9 494.8 486.8 479.0 471.3 463.7 456.1 448.7 441.3
15 608.1 599.9 591.9 583.9 576.1 568.3 560.7 553.1
20 713.3 705.0 696.9 688.9 681.0 673.2 665.4
25 818.5 810.2 802.0 793.9 786.0 778.1
30 923.7 915.4 907.2 899.0 891.0
35 1028.9 1020.6 1012.3 1004.1
40 1125.8 1117.5
45 1231.0

DISCHARGE PSIG
BHP
10 15 20 25 30 35 40 45 50 55 60
-10 9.1 10.1 11.1 12.0
-5 12.7 14.3 15.5 16.5 17.3 18.4 19.5 20.5 21.5 22.5 23.4
0 12.5 15.5 18.0 20.0 21.6 22.9 24.0 25.0 25.9 26.7 27.8
5 10.4 14.5 17.8 20.7 23.3 25.5 27.3 28.9 30.2 31.3 32.4
SUCTION PSIG

10 11.7 16.2 19.8 23.0 25.9 28.5 30.9 32.9 34.6 36.1
15 17.9 21.7 25.1 28.2 31.1 33.8 36.2 38.3
20 19.4 23.5 27.0 30.3 33.4 36.3 39.0
25 20.9 25.2 28.9 32.3 35.5 38.6
30 22.2 26.8 30.7 34.3 37.6
35 23.4 28.4 32.5 36.1
40 29.8 34.1
45 31.2

Note: Sweet Natural Gas with N Value of 1.3; MSCFD = Flow at 14.7 PSIA and 60° F

ANPEAA PERFORMANCE @ 968 RPM

DISCHARGE PSIG
MSCFD
50 75 100 125 150 175 200 225 250
0 57.6 46.1 36.1
10 123.8 108.2 92.8 82.1 71.9 61.9 52.3
20 191.3 174.7 158.9 143.7 128.8 118.1 107.8 97.6 87.7
30 259.3 242.1 225.6 209.7 194.3 179.3 164.9 154.2 143.7
SUCTION PSIG

40 310.0 292.9 276.5 260.6 245.0 229.8 214.9 200.9

50 378.2 360.7 343.8 327.4 311.4 295.8 280.5 265.4
60 446.7 428.8 411.5 394.7 378.3 362.3 346.6 331.2
70 497.1 479.4 462.3 445.6 429.2 413.2 397.5
80 565.6 547.6 530.1 513.1 496.5 480.1 464.1
90 616.0 598.2 580.9 564.0 547.4 531.0
100 684.5 666.5 648.9 631.7 614.8 598.3

DISCHARGE PSIG
BHP
50 75 100 125 150 175 200 225 250
0 6.4 6.8 6.8
10 8.9 10.2 10.7 11.2 11.5 11.4 11.0
20 9.4 12.4 14.0 14.7 15.1 15.7 16.0 16.1 16.0
30 8.8 13.0 15.9 17.6 18.5 19.1 19.5 20.0 20.4
SUCTION PSIG

40 12.7 16.6 19.4 21.1 22.3 23.0 23.5 23.9

50 11.9 16.5 20.1 22.8 24.7 25.9 26.8 27.4
60 10.1 15.9 20.1 23.6 26.2 28.2 29.5 30.5
70 14.9 19.7 23.7 27.1 29.7 31.6 33.1
80 13.1 19.0 23.5 27.3 30.5 33.1 35.1
90 17.9 22.9 27.1 30.8 34.0 36.5
100 16.1 22.0 26.7 30.7 34.3 37.4

11
GARDNER DENVER | A-SERIES

The leader in every market we serve

by continuously improving all business processes
with a focus on innovation and velocity

Gardner Denver, Inc.

1800 Gardner Expressway
Quincy, IL 62305
866-440-6241
www.gardnerdenver.com/gdproducts

©2018 Gardner Denver, Inc. Printed in U.S.A.

GR-A-SERIES 2nd Ed. 6/18

Please recycle after use.