FAVORIT 66603VI0P EN User Manual

2 www.aeg.com

CONTENTS
1. SAFETY INFORMATION.................................................................................................3
2. SAFETY INSTRUCTIONS................................................................................................ 4
3. PRODUCT DESCRIPTION.............................................................................................. 5
4. CONTROL PANEL...........................................................................................................6
5. PROGRAMMES............................................................................................................... 7
6. SETTINGS........................................................................................................................ 8
7. OPTIONS....................................................................................................................... 11
8. BEFORE FIRST USE.......................................................................................................12
9. DAILY USE......................................................................................................................13
10. HINTS AND TIPS......................................................................................................... 14
11. CARE AND CLEANING.............................................................................................. 15
12. TROUBLESHOOTING.................................................................................................17
13. TECHNICAL INFORMATION.....................................................................................18

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you impeccable
performance for many years, with innovative technologies that help make life simpler
features you might not find on ordinary appliances. Please spend a few minutes
reading to get the very best from it.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.aeg.com

Register your product for better service:

www.registeraeg.com

Buy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shop

CUSTOMER CARE AND SERVICE

Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the following
data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
 ENGLISH 3

1. SAFETY INFORMATION
Before the installation and use of the appliance,
carefully read the supplied instructions. The
manufacturer is not responsible if an incorrect
installation and use causes injuries and damages. Always
keep the instructions with the appliance for future
reference.
1.1 General Safety
• This appliance is intended to be used in household
and similar applications such as:
– farm houses; staff kitchen areas in shops, offices
and other working environments;
– by clients in hotels, motels, bed & breakfast and
other residential type environments.
• Do not change the specification of this appliance.
• The operating water pressure (minimum and
maximum) must be between 0.5 (0.05) / 8 (0.8) bar
(Mpa)
• Obey the maximum number of 13 place settings.
• If the supply cord is damaged, it must be replaced by
the manufacturer, its Authorised Service Centre or
similarly qualified persons in order to avoid a hazard.
• Put knives and cutlery with sharp points in the cutlery
basket with the points down or in a horizontal
position.
• Do not keep the appliance door open without
supervision to prevent to fall on it.
• Before maintenance, deactivate the appliance and
disconnect the mains plug from the mains socket.
• Do not use water spray and steam to clean the
appliance.
• The appliance is to be connected to the water mains
using the new supplied hose-sets. Old hose sets must
not be reused.
4 www.aeg.com

1.2 Children and vulnerable people safety

• This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved.
• Do not let children play with the appliance.
• Keep all detergents away from children.
• Keep children and pets away from the appliance door
when it is open.
• Cleaning and user maintenance shall not be made by
children without supervision.
2. SAFETY INSTRUCTIONS
2.1 Installation to be replaced, this must be carried
out by our Authorised Service Centre.
• Remove all the packaging. • Connect the mains plug to the mains
• Do not install or use a damaged socket only at the end of the
appliance. installation. Make sure that there is
• Do not install or use the appliance access to the mains plug after the
where the temperature is less than 0 installation.
°C. • Do not pull the mains cable to
• Obey the installation instruction disconnect the appliance. Always pull
supplied with the appliance. the mains plug.
• Make sure that the appliance is • This appliance complies with the
installed below and adjacent to safe E.E.C. Directives.
structures. • Only for UK and Ireland. The
appliance has a 13 amp mains plug. If
2.2 Electrical connection it is necessary to change the fuse in
the mains plug, use a 13 amp ASTA
WARNING! (BS 1362) fuse.
Risk of fire and electrical
shock. 2.3 Water connection
• The appliance must be earthed. • Make sure not to cause damage to
• Make sure that the electrical the water hoses.
information on the rating plate agrees • Before you connect the appliance to
with the power supply. If not contact new pipes or pipes not used for a
an electrician. long time, let the water flow until it is
• Always use a correctly installed clean.
shockproof socket. • The first time you use the appliance,
• Do not use multi-plug adapters and make sure that there is no leakage.
extension cables. • The water inlet hose has a safety valve
• Make sure not to cause damage to and a sheath with an inner mains
the mains plug and to the mains cable.
cable. Should the mains cable need
 ENGLISH 5

• Do not drink and play with the water

in the appliance.
• Do not remove the dishes from the
appliance until the programme is
completed. There can be detergent
on the dishes.
• The appliance can release hot steam
if you open the door while a
programme operates.
• Do not put flammable products or
items that are wet with flammable
WARNING! products in, near or on the appliance.
Dangerous voltage.
• If the water inlet hose is damaged, 2.5 Disposal
immediately disconnect the mains WARNING!
plug from the mains socket. Contact Risk of injury or suffocation.
the Authorised Service Centre to
replace the water inlet hose. • Disconnect the appliance from the
mains supply.
2.4 Use • Cut off the mains cable and discard it.
• Remove the door catch to prevent
• Do not sit or stand on the open door.
children and pets to get closed in the
• Dishwasher detergents are
appliance.
dangerous. Obey the safety
instructions on the detergent
packaging.

3. PRODUCT DESCRIPTION
1 2 3

12

11 10 9 8 7 6 5 4

1 Top spray arm

2 Upper spray arm
6 www.aeg.com

• When the programme is completed,

3 Lower spray arm 0:00 and CLEAN come on.
4 Filters • When the delay start starts, the
countdown duration and DELAY
5 Rating plate come on.
6 Salt container • When the appliance has a
7 Air vent malfunction, an alarm code appears.
8 Rinse aid dispenser
9 Detergent dispenser
10 Cutlery basket
11 Lower basket
12 Upper basket

3.1 TimeBeam
The TimeBeam is a display that shows on
the floor below the appliance door.
• When the programme starts, the
programme duration comes on.

4. CONTROL PANEL
1 2 3 4 5 6 7 8 9

1 On/off button 6 TimeSaver button

2 Display 7 Multitab button
3 Delay button 8 RESET button
4 Program button 9 Indicators
5 ExtraHygiene button

4.1 Indicators

Indicator Description

End indicator.

Salt indicator. It is always off while the programme operates.

Rinse aid indicator. It is always off while the programme operates.

 ENGLISH 7

5. PROGRAMMES
Programme Degree of soil Programme phases Options
Type of load

P1 • Normal soil • Prewash • ExtraHygiene

1) • Crockery and • Wash 50 °C • TimeSaver
cutlery • Rinses • Multitab
• Dry

P2 • All • Prewash • ExtraHygiene

2) • Crockery, cut- • Wash from 45 °C to 70 • Multitab
lery, pots and °C
pans • Rinses
• Dry

P3 • Heavy soil • Prewash • TimeSaver

3) • Crockery, cut- • Wash 70 °C • Multitab
lery, pots and • Rinses
pans • Dry

P4 • Normal or light • Wash 45 °C • Multitab

soil • Rinses
• Delicate crock- • Dry
ery and glass-
ware

P5 • Fresh soil • Wash 60 °C • ExtraHygiene

4) • Crockery and • Rinses • Multitab
cutlery

P6 • Normal soil • Prewash • Multitab

5) • Crockery and • Wash 50 °C
cutlery • Rinses
• Dry
1) With this programme you have the most efficient use of water and energy consumption for crockery
and cutlery with normal soil. (This is the standard programme for test institutes).
2) The appliance senses the degree of soil and the quantity of items in the baskets . It automatically ad-
justs the temperature and the quantity of water, the energy consumption and the programme duration.
3) This programme has a high temperature rinsing phase for better hygiene results. During the rinsing
phase, the temperature stays at 70 °C for at least 10 minutes.
4) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
5) This is the most silent programme. The pump works at a very low speed to decrease the level of noise.
Because of the low speed, the programme duration is long.

5.1 Consumption values

Programme 1) Water Energy Duration

(l) (kWh) (min)

P1 10.2 0.932 225

8 www.aeg.com

Programme 1) Water Energy Duration

(l) (kWh) (min)

P2 7 - 14 0.6 - 1.4 40 - 150

P3 12.5 - 14.5 1.4 - 1.6 154 - 164

P4 12 - 14 0.7 - 0.9 75 - 85

P5 10 0.9 30

P6 9 - 10 1.0 - 1.2 219 - 229

1) The pressure and the temperature of the water, the variations of the mains supply, the options and the
quantity of dishes can change the values.

5.2 Information for test info.test@dishwasher-production.com

institutes Write down the product number (PNC)
that is on the rating plate.
For all the necessary information for test
performance, send an email to:

6. SETTINGS
6.1 Programme selection How to set the programme
mode and user mode selection mode
When the appliance is in programme The appliance is in programme selection
selection mode it is possible to set a mode when the display shows the
programme and to enter the user mode. programme number P1.
In user mode, the following settings When you activate the appliance, usually
can be changed: it is in programme selection mode.
• The level of the water softener However, if this does not happen, you
according to the water hardness. can set the programme selection mode
• The activation or the deactivation of in the following way:
the acoustic signal for end of
Press and hold RESET until the appliance
programme.
is in programme selection mode.
• The selection of the colour for
TimeBeam.
• The deactivation of the rinse aid
6.2 The water softener
dispenser when you want to use the The water softener removes minerals
Multitab option without rinse aid. from the water supply, which would have
• The level of rinse aid according to the a detrimental effect on the washing
required dosage. results and on the appliance.
These settings will be saved until you The higher the content of these minerals,
change them again. the harder your water is. Water hardness
is measured in equivalent scales.
 ENGLISH 9

The water softener should be adjusted in your area. It is important to set the
according to the hardness of the water in right level of the water softener to assure
your area. Your local water authority can good washing results.
advise you on the hardness of the water

Water hardness
German de- French degrees mmol/l Clarke de- Water softener lev-
grees (°dH) (°fH) grees el

47 - 50 84 - 90 8.4 - 9.0 58 - 63 10

43 - 46 76 - 83 7.6 - 8.3 53 - 57 9

37 - 42 65 - 75 6.5 - 7.5 46 - 52 8

29 - 36 51 - 64 5.1 - 6.4 36 - 45 7

23 - 28 40 - 50 4.0 - 5.0 28 - 35 6

19 - 22 33 - 39 3.3 - 3.9 23 - 27 5 1)

15 - 18 26 - 32 2.6 - 3.2 18 - 22 4

11 - 14 19 - 25 1.9 - 2.5 13 - 17 3

4 - 10 7 - 18 0.7 - 1.8 5 - 12 2

<4 <7 <0.7 <5 1 2)

1) Factory setting.
2) Do not use salt at this level.

How to set the water softener 6.3 The rinse aid dispenser
level The rinse aid helps to dry the dishes
The appliance must be in programme without streaks and stains.
selection mode. The rinse aid is automatically released
1. To enter the user mode, press and during the hot rinse phase.
hold simultaneously and until You can set the released quantity of rinse
aid between level 1 (minimum quantity)
the indicators , , , and and level 6 (maximum quantity). Level 0
start to flash and the display is blank. will deactivate the rinse aid dispenser
2. Press . and no rinse aid will be released.
• The indicators , , and Factory setting: level 4.
go off.
• The indicator continues to How to set the rinse aid level
flash. The appliance must be in programme
• The display shows the current selection mode.
setting: e.g. = level 5.
1. To enter the user mode, press and
3. Press again and again to change
hold simultaneously and until
the setting.
4. Press the on/off button to confirm the indicators , , , and
the setting. start to flash and the display is blank.
2. Press .
10 www.aeg.com

• The indicators , , and 6.5 Acoustic signals

go off. Acoustic signals sound when a
• The indicator continues to malfunction of the appliance occurs. It is
flash. not possible to deactivate these acoustic
• The display shows the current signals.
setting: e.g. = level 4. There is also an acoustic signal that
– The levels of rinse aid are sounds when the programme is
from 0A to 6A. completed. By default this acoustic
– Level 0 = no rinse aid is signal is deactivated but it is possible to
released. activate it.
3. Press again and again to change
the setting. How to activate the acoustic
4. Press the on/off button to confirm signal for the end of
the setting. programme
6.4 Use of rinse aid and multi- The appliance must be in programme
tablets selection mode.
1. To enter the user mode press and
When you activate the option Multitab,
the rinse aid dispenser continues to hold simultaneously and until
release rinse aid. However you can the indicators , , , and
deactivate the rinse aid dispenser. In this start to flash and the display is blank.
case the drying results may not be
satisfactory. 2. Press
• The indicators , , and
With the rinse aid dispenser deactivated,
go off.
the rinse aid indicator is always off.
• The indicator continues to
How to deactivate the rinse flash.
• The display shows the current
aid dispenser
setting: = Acoustic signal off.
The appliance must be in programme
selection mode. 3. Press to change the setting.
1. To enter the user mode, press and = Acoustic signal on.
4. Press the on/off button to confirm
hold simultaneously and until the setting.
the indicators , , , and
start to flash and the display is blank. 6.6 How to set the colour of
2. Press . the TimeBeam
• The indicators , , and The appliance must be in programme
go off. selection mode.
• The indicator continues to It is possible to change the colour of the
flash. TimeBeam to match the colour of the
• The display shows the current kitchen floor. There are several colours
setting: = rinse aid dispenser available. The TimeBeam can also be
activated. deactivated.
3. Press to change the setting. 1. To enter the user mode, press and
= rinse aid dispenser deactivated. hold simultaneously and until
The rinse aid indicator goes off.
4. Press the on/off button to confirm the indicators , , , and
the setting. start to flash and the display is blank.
2. Press .
 ENGLISH 11

• The indicators , , and 3. Press again and again to change

go off. the colour.
• You can see the different colours
• The indicator continues to on the kitchen floor.
flash. 4. Press the on/off button to confirm
• The display shows a number and the setting.
the letter C. Each number refers
to a different colour.
– = TimeBeam
deactivated.

7. OPTIONS
washing and the drying phases are
Desired options must be
shorter.
activated every time before
you start a programme. It is The total programme duration decreases
not possible to activate or by approximately 50%.
deactivate options while a The washing results are the same as with
programme is running. the normal programme duration. The
drying results can decrease.
Not all options are compatible
with each other. If you have
selected non compatible
How to activate TimeSaver
options, the appliance will Press , the related indicator comes on.
automatically deactivate one If the option is not applicable to the
or more of them. Only the programme, the related indicator does
indicators of the options still not come on or it flashes quickly for a
active will stay on. few seconds and then goes off.
The display shows the updated
7.1 Multitab programme duration.
Activate this option when you use multi-
tablets that integrate the salt, rinse aid 7.3 ExtraHygiene
and detergent functions. They can also With this option you have better hygiene
contain other cleaning or rinsing agents. results. During the last rinsing phase, the
This option deactivates the release of temperature stays at 70 °C for at least 10
salt. The salt indicator does not come on. minutes.
With the use of this option the How to activate ExtraHygiene
programme duration is prolonged to
increase the cleaning and drying results Press , the related indicator comes on
with the use of multi-tablets. If the option is not applicable to the
Multitab is not a permanent option and programme, the related indicator does
must be selected at every cycle. not come on or it flashes quickly for a
few seconds and then goes off.
How to activate Multitab The display shows the updated
programme duration.
Press .
The related indicator comes on.

7.2 TimeSaver
This option increases the pressure and
the temperature of the water. The
12 www.aeg.com

8. BEFORE FIRST USE

1. Make sure that the current level of
the water softener agrees with the
hardness of the water supply. If
not, adjust the level of the water
softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any 5. Turn the cap of the salt container
processing residuals that can still be clockwise to close the salt container.
inside the appliance. Do not use
detergent and do not load the Water and salt can come out
baskets. from the salt container when
When you start a programme, the you fill it. Risk of corrosion. To
appliance can take up to 5 minutes to prevent it, after you fill the salt
recharge the resin in the water softener. container, start a programme.
It seems that the appliance is not
working. The washing phase starts only 8.2 How to fill the rinse aid
after this procedure is completed. The
procedure will be repeated periodically.
dispenser
8.1 The salt container A B

CAUTION!
Only use salt specifically
designed for dishwashers.

The salt is used to recharge the resin in

the water softener and to assure good
washing results in the daily use.

How to fill the salt container

1. Turn the cap of the salt container
counterclockwise and remove it.
2. Put 1 litre of water in the salt C
container (Only for the first time).
3. Fill the salt container with dishwasher
salt. CAUTION!
Only use rinse aid specifically
designed for dishwashers.

1. Open the lid (C).

2. Fill the dispenser (B) until the rinse
aid reaches the marking ''MAX''.
3. Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam.
4. Close the lid. Make sure that the lid
locks into position.
4. Remove the salt around the opening Fill the rinse aid dispenser
of the salt container. when the indicator (A)
becomes clear.
 ENGLISH 13

9. DAILY USE
1. Open the water tap. 9.2 Setting and starting a
2. Press the on/off button to activate
the appliance.
programme
Make sure that the appliance is in user
mode. The Auto Off function
• If the salt indicator is on, fill the This function decreases energy
salt container. consumption by deactivating
• If the rinse aid indicator is on, fill automatically the appliance when it is not
the rinse aid dispenser. operating.
3. Load the baskets.
4. Add the detergent. If you use multi- The function comes into operation:
tablets, activate the option Multitab. • 5 minutes after the completion of the
5. Set and start the correct programme programme.
for the type of load and the degree • After 5 minutes if the programme has
of soil. not started.

9.1 Using the detergent Starting a programme

A B 1. Keep the appliance door ajar.
2. Press the on/off button to activate
the appliance. Make sure that the
appliance is in programme selection
mode.
3. Press repeatedly until the display
shows the number of the programme
you want to start. The display will
show the programme number for
approximately 3 seconds and then
show the programme duration.
The display will show the programme
C number for approximately 3 seconds and
then show the programme duration.
CAUTION! 4. Set the applicable options.
Only use detergent 5. Close the appliance door to start the
specifically designed for programme.
dishwashers.

1. Press the release button (A) to open Starting a programme with

the lid (C). delay start
2. Put the detergent, in powder or
1. Set a programme.
tablets, in the compartment (B).
3. If the programme has a prewash 2. Press again and again until the
phase, put a small quantity of display shows the delay time you
detergent on the inner part of the want to set (from 1 to 24 hours).
appliance door. The delay indicator comes on.
4. Close the lid. Make sure that the lid 3. Close the appliance door to start the
locks into position. countdown.
While a countdown is running it is
possible to increase the delay time but
not to change the selection of the
programme and options.
When the countdown is completed, the
programme starts.
14 www.aeg.com

Opening the door while the Press and hold RESET until the appliance
is in programme selection mode.
appliance operates
If you open the door while a programme Cancelling the programme
is running, the appliance stops. When
you close the door, the appliance Press and hold RESET until the appliance
continues from the point of interruption. is in programme selection mode.
Make sure that there is detergent in the
If the door is opened for more detergent dispenser before you start a
than 30 seconds during the new programme.
drying phase, the running
programme will end. End of programme
When the programme is completed and
Cancelling the delay start while you open the door, the appliance is
the countdown operates automatically deactivated.
When you cancel the delay start you Close the water tap.
have to set the programme and options
again.

10. HINTS AND TIPS

10.1 General 10.2 Using salt, rinse aid and
The following hints will ensure optimal detergent
cleaning and drying results in daily use • Only use salt, rinse aid and detergent
and also help to protect the for dishwasher. Other products can
environment. cause damage to the appliance.
• Remove larger residues of food from • Multi-tablets are usually suitable in
the dishes into the waste bin. areas with a water hardness up to 21
• Do not pre-rinse dishes by hand. °dH. In areas exceeding this limit,
When needed, use the prewash rinse aid and salt must be used in
programme (if available) or select a addition to the multi-tablets.
programme with a prewash phase. However, in areas with hard and very
• Always use the whole space of the hard water we recommend to use
baskets. solo-detergent (powder, gel, tablets
• When loading the appliance, make without additional functions), rinse aid
sure that the dishes can be and salt separately for optimal
completely reached and washed by cleaning and drying results.
the water released from the spray arm • If you use multi-tablets you can select
nozzles. Make sure that items do not the Multitab option (if available). This
touch or cover each other. option increases the cleaning and
• You can use dishwasher detergent, drying results with the use of multi-
rinse aid and salt separately or you tablets.
can use the multi-tablets (e.g. ''3in1'', • Detergent tablets do not fully dissolve
''4in1'', ''All in 1''). Follow the with short programmes. To prevent
instructions written on the packaging. detergent residues on the tableware,
• Select the programme according to we recommend that you use the
the type of load and degree of soil. tablets with long programmes.
With the ECO programme you have • Do not use more than the correct
the most efficient use of water and quantity of detergent. Refer to the
energy consumption for crockery and instructions on the detergent
cutlery with normal soil. packaging.
 ENGLISH 15

10.3 What to do if you want to • Put small items in the cutlery basket.
• Put light items in the upper basket.
stop using multi-tablets Make sure that the items do not
Before you start to use separately move.
detergent, salt and rinse aid do the • Make sure that the spray arm can
following procedure. move freely before you start a
programme.
1. Set the highest level of the water
softener.
2. Make sure that the salt and rinse aid 10.5 Before starting a
containers are full. programme
3. Start the shortest programme with a
Make sure that:
rinsing phase. Do not add detergent
and do not load the baskets. • The filters are clean and correctly
4. When the programme is completed, installed.
adjust the water softener according • The cap of the salt container is tight.
to the water hardness in your area. • The spray arms are not clogged.
5. Adjust the released quantity of rinse • There is dishwasher salt and rinse aid
aid. (unless you use multi- tablets).
• The position of the items in the
10.4 Loading the baskets baskets is correct.
• The programme is applicable for the
• Only use the appliance to wash items type of load and for the degree of
that are dishwasher-safe. soil.
• Do not put in the appliance items • The correct quantity of detergent is
made of wood, horn, aluminium, used.
pewter and copper.
• Do not put in the appliance items that 10.6 Unloading the baskets
can absorb water (sponges,
household cloths). 1. Let the tableware cool down before
• Remove remaining food from the you remove it from the appliance.
items. Hot items can be easily damaged.
• Make soft the remaining burned food 2. First remove items from the lower
on the items. basket, then from the upper basket.
• Put hollow items (cups, glasses and At the end of the programme
pans) with the opening down. water can still remain on the
• Make sure that cutlery and dishes do sides and on the door of the
not bond together. Mix spoons with appliance.
other cutlery.
• Make sure that glasses do not touch
other glasses.

11. CARE AND CLEANING

WARNING! 11.1 Cleaning the filters
Before maintenance, The filter system is made of 3 parts.
deactivate the appliance and
disconnect the mains plug
from the main socket.

Dirty filters and clogged spay

arms decrease the washing
results. Make a check regularly
and, if necessary, clean them.
16 www.aeg.com

5. Make sure that there are no residues

of food or soil in or around the edge
1. Turn the filter (B) counterclockwise of the sump.
and remove it. 6. Put back in place the flat filter (A).
Make sure that it is correctly
positioned under the 2 guides.

7. Reassemble the filters (B) and (C).

8. Put back the filter (B) in the flat filter
2. Remove the filter (C) out of filter (B). (A). Turn it clockwise until it locks.
3. Remove the flat filter (A).

4. Wash the filters.

CAUTION!
An incorrect position of the
filters can cause bad washing
results and damage to the
appliance.
 ENGLISH 17

11.2 Cleaning the spray arms 11.4 Internal cleaning

Do not remove the spray arms. If the • Carefully clean the appliance,
holes in the spray arms are clogged, including the rubber gasket of the
remove remaining parts of soil with a thin door, with a soft moist cloth.
pointed object. • If you regularly use short duration
programmes, these can leave
11.3 External cleaning deposits of grease and limescale
inside the appliance. To prevent this,
• Clean the appliance with a moist soft we recommend to run long duration
cloth. programmes at least 2 times per
• Only use neutral detergents. month.
• Do not use abrasive products,
abrasive cleaning pads or solvents.

12. TROUBLESHOOTING
If the appliance does not start or it stops With some problems, the display
during operation. Before you contact an shows an alarm code.
Authorised Service Centre, check if you
can solve the problem by yourself with
the help of the information in the table.

Problem and alarm code Possible solution

You cannot activate the ap- • Make sure that the mains plug is connected to the
pliance. mains socket.
• Make sure that there is no a damage fuse in the fuse
box.

The programme does not • Make sure that the appliance door is closed.
start. • If the delay start is set, cancel the setting or wait for the
end of the countdown.
• The appliance has started the procedure to recharge
the resin inside the water softener. The duration of the
procedure is approximately 5 minutes.

The appliance does not fill • Make sure that the water tap is open.
with water. • Make sure that the pressure of the water supply is not
The display shows . too low. For this information, contact your local water
authority.
• Make sure that the water tap is not clogged.
• Make sure that the filter in the inlet hose is not clogged.
• Make sure that the inlet hose has no kinks or bends.

The appliance does not • Make sure that the sink spigot is not clogged.
drain the water. • Make sure that the drain hose has no kinks or bends.
The display shows .

The anti-flood device is on. • Close the water tap and contact an Authorised Service
The display shows . Centre.

Once you have checked the appliance, the problem occurs again, contact an
deactivate and activate the appliance. If Authorised Service Centre.
18 www.aeg.com

For alarm codes not described in the

table, contact an Authorised Service
Centre.

12.1 The washing and drying results are not satisfactory

Problem Possible solution

There are whitish streaks or • The release quantity of rinse aid is too much. Adjust
bluish layers on glasses and the rinse aid selector to a lower position.
dishes. • The quantity of detergent is too much.

There are stains and dry water • The released quantity of rinse aid is not sufficient. Ad-
drops on glasses and dishes. just the rinse aid selector to a higher position.
• The quality of the rinse aid can be the cause.

The dishes are wet. • The programme does not have a drying phase or has
a drying phase with low temperature.
• The rinse aid dispenser is empty.
• The quality of the rinse aid can be the cause.
• The quality of the multi-tablets can be the cause. Try a
different brand or activate the rinse aid dispenser and
use rinse aid and multi-tablets together.

Refer to "Hints and tips" for

other possible causes.

13. TECHNICAL INFORMATION

Dimensions Width / height / depth (mm) 596 / 818-898 / 550

Electrical connection 1) Voltage (V) 220-240

Frequency (Hz) 50

Water supply pressure Min. / max. bar (MPa) 0.5 (0.05) / 8 (0.8)

Water supply Cold water or hot water 2) max 60 °C

Capacity Place settings 13

Power consumption Left-on mode (W) 0.99

Power consumption Off-mode (W) 0.10

1) Refer to the rating plate for other values.
2) f the hot water comes from alternative source of energy, (e.g. solar panels, aeolian energy), use the
hot water supply to decrease energy consumption.

14. ENVIRONMENTAL CONCERNS

appliances. Do not dispose appliances
Recycle the materials with the symbol .
Put the packaging in applicable marked with the symbol with the
containers to recycle it. Help protect the household waste. Return the product to
environment and human health and to your local recycling facility or contact
recycle waste of electrical and electronic your municipal office.

*
ENGLISH 19
 www.aeg.com/shop

117902770-A-062014