Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 229 views

    Ohlins YA 145

    Uploaded by

    skout arie
    owner manual

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Ohlins YA 145

    Uploaded by

    skout arie
    229 views4 pages
    owner manual

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    owner manual

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    229 views4 pages

    Ohlins YA 145

    Uploaded by

    skout arie
    owner manual

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4
    At a glance
    Powered by AI
    The document provides instructions for installing Öhlins shock absorbers on a Yamaha XJR 400 motorcycle. It details the kit contents, mounting instructions over multiple pages, and information about adjustments.

    The steps are to put the motorcycle on a workstand, loosen and remove the original shock absorbers, and install the Öhlins shock absorbers in the same positions with the cylinder head up and gas reservoir towards the rear.

    Safety precautions mentioned are to ensure all screws are tightened correctly, nothing fouls movement during suspension compression/extension, work on a raised vehicle securely supported, and see the vehicle service manual for procedures.

    Kit Contents

    Description Part No Pcs


    Shock absorber YA145 2
    Washer 03118-13 2
    C-spanner 00710-01 2
    Sticker set Öhlins 1
    Owner’s manual 07241-02 1

    Note! Note!
    Please note that this image is a general representation Before installing this product, check the contents
    of the product and may differ slightly from your product. of the kit. If anything is missing, please contact an
    Öhlins dealer.
    Note!
    Please note that during storage and transportation, Warning!
    especially at high ambient temperature, some of the oil Before installing this product, read the Öhlins Owner’s
    and grease used for assembling may leak and stain the Manual. The shock absorber/front fork/steering damper
    packaging. This is in no way detrimental to the product, is an important part of your vehicle and will affect
    wipe off the excessive oil/grease with a cloth. the stability.

    Shock absorber for Yamaha XJR 400

    YA 145
    Mounting Instructions
    MOUNTING INSTRUCTIONS
    Warning!
    It is advisable to have an Öhlins dealer install the shock
    absorber/front fork/steering damper.

    Warning!
    If working on a raised vehicle, ensure it is securely
    supported so that it will not tip.

    Note!
    Before mounting this product clean the vehicle
    thoroughly.

    Note!
    When working on this product, always see the Vehicle
    Service Manual for vehicle specific procedures and
    important data.

    1
    Put the motorcycle on a workstand so that the
    rear wheel barely touches the ground.

    2
    Loosen and remove the original shock
    absorbers.

    3
    Install the Öhlins shock absorbers in the same
    positions as the original shock absorbers.
    Cylinder head up and gas reservoir towards
    the rear.

    Note!
    Lower the vehicle so that the suspension is slightly
    compressed before tightening the screws.

    Caution!
    Ensure that all screws are tightened to the correct
    torque and that nothing fouls or restricts movement of
    the shock absorber/front fork/steering damper when the
    suspension is fully compressed or extended.

    2/4
    MOUNTING INSTRUCTIONS

    3/4
    ADJUSTMENTS
    Warning!
    Before riding, always make sure that the basic settings
    made by Öhlins are according to recommended Set- Spring
    up Data. Read about adjustments and setting up in preload
    adjuster
    the Öhlins Owner’s Manual before you make any
    adjustments. Contact an Öhlins dealer if you have any
    questions about setting up.

    SET-UP DATA
    Length 320,5 mm
    Stroke 83 mm
    Spring preload 14 mm

    Öhlins products are subject to To find the latest information


    continuous improvement and contact an Öhlins distributor.
    development, therefore, although Please contact Öhlins if you have
    these instructions include the most any questions regarding the
    up-to-date information available at contents in this document.
    the time of printing, minor updates
    may occur. Part no. MI_YA145_1
    Issued 2017-01-01

    © Öhlins Racing AB. All rights Öhlins Racing AB


    reserved. Any reprinting or Box 722
    unauthorized use without the written S-194 27 Upplands Väsby, Sweden
    permission of Öhlins Racing AB Phone +46 8 590 025 00
    is prohibited. fax +46 8 590 025 80

    You might also like