Contact Details Internet

Before using the product, please check the http://www.daikinpmc.com/en/

guide pages at the front of this catalog. For latest information, PDF catalogs and operation manuals

02 Series Stacking Type Relief Valves

JIS graphic symbols for hydraulic system
MR-02P MR-02A MR-02B

P T A B P T A B P T A B

Nomenclature
 - MR - 02  -  -  -  
1 2 3 4 5 6 7 8
1 Applicable fluid code 5 Pressure adjustment range
No designation: Petroleum-based hydraulic fluid, 1: Up to 7 MPa {Up to 70 kgf/cm 2}
water-glycol hydraulic fluid 2: 3.5 to 16 MPa {35 to 160 kgf/cm 2}
F: Phosphate ester hydraulic fluid 3: 3.5 to 25 MPa {35 to 250 kgf/cm2}
2 Model No. 4: 7.0 to 35 MPa {70 to 350 kgf/cm 2} (applicable only to design No. 60)
MR: Modular stacking type relief valve 6 Design No. (The design No. is subject to change)
3 Nominal diameter 55: 25 MPa {250 kgf/cm2} series
02: ¼ 60: 35 MPa {350 kgf/cm 2} series
4 Control port 7 Pressure adjusting screw position I

MODULAR STACK VALVES

P: Port P No designation: Adjusted at port B side
A: Port A G: Adjusted at port A side (applicable only to design No. 55)
B: Port B 8 Option code
No designation: Pressure adjusting screw type
T: Pressure adjusting handle type

Specifications
Maximum operating pressure Maximum flow Pressure adjustment range *1 Mass Pressure change
Model code
MPa {kgf/cm2} rate L/min MPa {kgf/cm2} kg MPa {kgf/cm2} per screw revolution
MR-02-1-55 Up to 7 {Up to 70} 2.5 {25}/revolution
MR-02-2-55 25 {250} 3.5 to 16 {35 to 160} 1.4 4.6 {46}/revolution
MR-02-3-55 3.5 to 25 {35 to 250} 7.9 {79}/revolution
MR-02-1-60 40 Up to 7 {Up to 70} 2.5 {25}/revolution
MR-02-2-60 3.5 to 16 {35 to 160} 4.6 {46}/revolution
35 {350} 1.5
MR-02-3-60 3.5 to 25 {35 to 250} 7.9 {79}/revolution
MR-02-4-60 7.0 to 35 {70 to 350} 9 {90}/revolution
Note: *1 The minimum adjustment pressure varies depending on the flow rate. See the minimum adjustment pressure characteristics for details.

Handling
 Maintain the back pressure of the tank port at no greater than 0.5 MPa {5 kgf/cm2}.
 When using the valve as a safety valve, set the pressure 1 to 1.5 MPa {10 to 15 kgf/cm2} higher than the pressure set for the hydraulic circuit.

Performance curves (viscosity: 32 mm2/s {cSt})

Pressure drop characteristics Pressure - Flow rate characteristics Minimum adjustment pressure
0.4 35 (4th pattern) characteristics
34
Port A (MR-02P, MR-02B) 33 1.2
Cracking pressure
Port B (MR-02P, MR-02A)
(MPa) {×10 kgf/cm2}

0.3 32 Reseat pressure

Pressure (MPa) {×10 kgf/cm2}

31 1.0
Pressure drop

30
Pressure (MPa) {×10 kgf/cm2}

Port P (MR-02P)
0.2 Port A (MR-02A) 0.8
Port B (MR-02B) 25 (3rd pattern)
24
0.6
23
0.1 Port T 22 Cracking pressure 0.4
Port P (MR-02A, B) 21 Reseat pressure
16 (2nd pattern) 0.2
0
0 10 20 30 40 15
Cracking pressure
Flow rate (L/min) 14 0
13 Reseat pressure 0 10 20 30 40
Cracking pressure (1st pattern) Flow rate (L/min)
7
6
Reseat pressure
5
0 10 20 30 40
Flow rate (L/min)
I-15
Contact Details Internet
Before using the product, please check the http://www.daikinpmc.com/en/
guide pages at the front of this catalog. For latest information, PDF catalogs and operation manuals

External dimension diagram

MR-02--55

Maximum 131.5 31.5

31.75
B A

31
46
T
0.75

21.5

7.5
4−φ5.4 40.5 10

Maximum 163
Lock nut
Width across flats: 14 Maximum 56.5 106.5
40

22

4−φ12.32
22

Pressure adjusting screw (clockwise: pressure increase)

Socket for hex key: 5

For products with option code G, the pressure adjusting screw is located at the port A side.

Sectional structural diagram

MR-02--55

8 14 11 6 16 13 3 9 17 7 4 19 10 2 5 18 15 1 20

Sealing part table

Part No. Name Quantity Part specifications
15 O-ring 4 AS568-012 (NBR, Hs90)
16 O-ring 1 JIS B 2401 1A P11
17 O-ring 1 JIS B 2401 1A P21
18 O-ring 1 JIS B 2401 1B P14
19 O-ring 1 AS568-013 (NBR, Hs90)

I-16
Contact Details Internet
Before using the product, please check the http://www.daikinpmc.com/en/
guide pages at the front of this catalog. For latest information, PDF catalogs and operation manuals

External dimension diagram

MR-02--60
40.5 18.5
30.2
21.5
12.7

31.75
31
25.9
15.5
B

14 (Width across flats) T

4−φ5.4

0.75
5 (Socket for hex key)

5.1

7.5
40
24.5

Pressure adjusting screw

(clockwise: pressure increase)
22
4−φ12.32
46
Maximum 56.5 115 I

MODULAR STACK VALVES

Maximum 171.5

MR-02--60-T

   
 
DEC

φ30
IN C

40
24.5

22 Maximum 94 115
46 Maximum 209

Sectional structural diagram

MR-02--60

9 3 4 10 2 1 13

16 8 12 6 15 18 19 7 20 5 22 21 17

Sealing part table

Part No. Name Quantity Part specifications
17 O-ring 4 AS568-012 (NBR, Hs90)
18 O-ring 1 JIS B 2401 1A P11
19 O-ring 1 JIS B 2401 1A P21
20 O-ring 1 AS568-013 (NBR, Hs90)
21 O-ring 1 JIS B 2401 1B P14
22 Backup ring 1 JIS B 2407 Bias cut P14

I-17