Boiler
Boiler
Boiler
DESCRIPTION
The BFT boiler feed tank is one of the most important devices in a boiler room. Its main function is to store the
make-up water and condensate, assuring a reserve of treated water to supply the steam boilers.
The make-up water has to be softened to prevent scale formation on the boiler and the oxygen must also be
removed so that corrosion in the boiler and steam system is avoided ( this situation is normally handled by
specialists).
The consumption of chemicals used to eliminate the oxygen can be drastically reduced if used one of the several
ADCAtherm thermal degasification processes (ADG, TDG, FCD) for the removal of oxygen and other non-
condensable gases (mainly carbon dioxide).
Even if you choose not to use one of the mentioned systems, the ADCATherm boiler feed tanks will always be
optimized according to the existing needs, therefore being able to include water pre-heating as well as other
features obvious to a true steam expert , but not to a simple tank manufacturer.
VALSTEAM ADCA We reserve the right to change the design and material of this product without notice.
IS BFT.20 E 07.12
ADCA
MAIN DIMENSIONS
CAPACITY A B C D E F WEIGHT
M ODEL
* Liters mm mm mm mm mm mm * kgs
LIMITING CONDITIONS
PS - Maximum Allow able Pressure 0,5 bar
TS - Maximum Allow able Temperature 120 ºC
Minimum operating temp.: -10ºC. Design code: AD-Merkblatt
Other conditions and CE marking on request.
Remarks: calculations have been made for 6bar at 120ºC
VALSTEAM ADCA We reserve the right to change the design and material of this product without notice.
IS BFT.20 E 07.12
ADCA
VALSTEAM ADCA We reserve the right to change the design and material of this product without notice.
IS BFT.20 E 07.12