Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

A Real Hero College Tab2

Download as pdf or txt
Download as pdf or txt
You are on page 1of 56

XEU ENG 1 27/02/2006 13:33 Page 1

User’s Manual

DVD-V5600
DVD-V6600
PAL
www.samsung.com/uk

More user manuals on ManualsBase.com


XEU ENG 1 27/02/2006 13:33 Page 2

Safety Instructions
The following illustrations represent precautions.

The lightning bolt is a warning sign alerting you to dangerous voltage inside the product.
DO NOT OPEN THE DVD-VCR. Refer to service personnel.

DO NOT expose the DVD-VCR to DO NOT expose the DVD-VCR to DO NOT expose the DVD-VCR
extreme temperature conditions direct sunlight. to any liquids.
(below 5°C and above 40°C) or to
extreme humidity conditions (less
than 10% and more than 75%).

DO NOT place any objects on the During a storm and/or lightning, If the remote control is not used
DVD-VCR or remote control. unplug the DVD-VCR from the for a long period of time, remove
mains jack and aerial. the batteries and store it in a
cool, dry place.

THIS DEVICE IS NOT FOR USE IN INDUSTRIAL ENVIRONMENTS

This product incorporates copyright protection technology that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for
home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engi-
neering or disassembling is prohibited.

2 - English

More user manuals on ManualsBase.com


XEU ENG 1 27/02/2006 13:33 Page 3

Disc Type and Characteristics

This DVD-VCR is capable of playing the following types of discs with the corresponding logos :

Disc Types (Logos) Recording Types Disc Size Max. Playing Time Characteristics
• DVD contains excellent sound and
DVD Single-sided 240 min.
12 Cm video due to Dolby Digital and
Audio Double-sided 480 min. MPEG-2 system.
+
• Various screen and audio functions
Video Single-sided 80 min.
8 Cm can be easily selected through the
Double-sided 160 min. on-screen menu.

VIDEO-CD Audio 12 Cm 74 min.


• Video with CD sound, VHS quality &
+
MPEG-1 compression technology.
Video
8 Cm 20 min.

AUDIO-CD 12 Cm 74 min. • CD is recorded as a Digital Signal


with better audio quality, less distor-
Audio
tion and less deterioration of audio
8 Cm 20 min. quality over time.

- DO NOT play CD-ROM, CD-I and DVD-ROM in this player! (CDGs play audio only, not graphics).
- It may not play CD-R,CD-RW and DVD-R, -RW, DVD+R, +RW in all cases due to the type of disc
or condition of the recording.
- The recorded disc may not run as playback depends on the recording speed.
- Do not run the player with two discs loaded at the same time.

Disc Markings Play Region Number


Both the DVD-VCR and the discs are coded by
~ Play Region Number.
region. These regional codes must match in
PAL colour system in Europe, Australia, order for the disc to play. If the codes do not
PAL New Zealand, etc. match, the disc will not be played.

NTSC NTSC broadcast system in U.S.A, The Region Number for this player is
Canada, Korea, Japan, etc. described on the rear panel of the player.
Dolby Digital disc.

STEREO Stereo disc.

DIGITAL
Digital Audio disc.
SOUND

DTS disc.

Disc contains a Divx software product.

English - 3

More user manuals on ManualsBase.com


XEU ENG 1 27/02/2006 13:33 Page 4

Recording a Programme with Automatic Stop . . . . . . . . . .25


Contents Recording from Another VCR or Camcorder . . . . . . . . . . . . .25
Using the Assemble Edit Function . . . . . . . . . . . . . . . . . .26
Getting Started Using the Timer Programming Feature . . . . . . . . . . . . . . .26
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Checking a Preset Recording . . . . . . . . . . . . . . . . . . . . . .27
Disc Type and Characteristics . . . . . . . . . . . . . . . . . . . . . .3 Cancelling a Preset Recording . . . . . . . . . . . . . . . . . . . . .28
Overviews . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Front View of the DVD-VCR (DVD-V5600) . . . . . . . . . . .5
Playing Back
Playing a Cassette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Front View of the DVD-VCR (DVD-V6600) . . . . . . . . . . .5
Adjusting Picture Alignment Manually . . . . . . . . . . . . . . . .29
Rear View of the DVD-VCR (DVD-V5600/DVD-V6600) . .6
Selecting the Audio Output Mode . . . . . . . . . . . . . . . . . . .29
Display Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Playing a Cassette in Slow Motion . . . . . . . . . . . . . . . . . .29
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Playing a Sequence Frame by Frame . . . . . . . . . . . . . . . .30
Inserting Batteries in the Remote Control . . . . . . . . . . . . . .7
Playing a Sequence at Variable Speeds . . . . . . . . . . . . . .30
Tour of the Remote Control . . . . . . . . . . . . . . . . . . . . . . .7
Searching for a Specific Sequence . . . . . . . . . . . . . . . . . .30
Connections Using the Tape Counter . . . . . . . . . . . . . . . . . . . . . . . . . .32
Connecting DVD-VCR to the TV using the RF Cable . . . . 9
Connecting DVD-VCR to the TV using the DVD Functions
SCART Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Setting Up the Language Features . . . . . . . . . . . . . . . . . .33
Connecting DVD-VCR to a Satellite Receiver or Setting Up the Audio Options . . . . . . . . . . . . . . . . . . . . . .34
Other Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Setting Up the Display Options . . . . . . . . . . . . . . . . . . . . .35
Connecting DVD-VCR to the TV using the Setting Up the Parental Control . . . . . . . . . . . . . . . . . . . . .36
Audio/Video Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 DivX(R) Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Connecting DVD-VCR to the TV using the Firmware Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
S-Video Cable (DVD Only) . . . . . . . . . . . . . . . . . . . . . . . 11 Special Playback Features . . . . . . . . . . . . . . . . . . . . . . . .39
Connecting DVD-VCR to the TV using the Using the Display Function . . . . . . . . . . . . . . . . . . . . . . . .40
Component Video Cable (DVD Only) . . . . . . . . . . . . . . . 11 Adjusting the Aspect Ratio (EZ View) . . . . . . . . . . . . . . . .41
AV Receiver Connections . . . . . . . . . . . . . . . . . . . . . . . . 12 Selecting the Subtitle Language . . . . . . . . . . . . . . . . . . . .42
Connecting an Audio/Video Input Cable . . . . . . . . . . . . . 13 Selecting the Audio Language . . . . . . . . . . . . . . . . . . . . . .43
Plug & Auto Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Changing the Camera Angle . . . . . . . . . . . . . . . . . . . . . . .43
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Settings Marks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Tuning Your Television for the DVD-VCR . . . . . . . . . . . . . .15 Repeat Chapter/Title . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Setting the Date and Time . . . . . . . . . . . . . . . . . . . . . . . .15 A to B Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Setting the Clock Automatically . . . . . . . . . . . . . . . . . . .16 MP3/WMA Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Setting the Menu Language . . . . . . . . . . . . . . . . . . . . . . .16 Program & Random Play (CD/MP3/WMA) . . . . . . . . . . . . . . .47
Presetting the Stations Automatically . . . . . . . . . . . . . . . .16 Picture CD Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Presetting the Stations Manually . . . . . . . . . . . . . . . . . . . .17 DivX/MPEG4 Playback . . . . . . . . . . . . . . . . . . . . . . . . . .49
Clearing a Preset Station . . . . . . . . . . . . . . . . . . . . . . . . .18 DivX/MPEG4 Special Playback Features . . . . . . . . . . . . .49
Changing the Preset Station Table . . . . . . . . . . . . . . . . . .19
Setting the VCR Output Channel . . . . . . . . . . . . . . . . . . .20 Reference
Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . .51
VCR Functions
Troubleshooting Guide (VCR) . . . . . . . . . . . . . . . . . . . . . .52
Selecting the Colour Mode . . . . . . . . . . . . . . . . . . . . . . . .21 Troubleshooting Guide (DVD) . . . . . . . . . . . . . . . . . . . . . .53
NICAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Intelligent Picture Control . . . . . . . . . . . . . . . . . . . . . . . . .22
Auto Power off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Screen Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Selecting the Cassette Type . . . . . . . . . . . . . . . . . . . . . . .23
Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Selecting the Recording Speed . . . . . . . . . . . . . . . . . . . .24
Protecting a Recorded Cassette . . . . . . . . . . . . . . . . . . . .24
Recording a Programme Immediately . . . . . . . . . . . . . . . .24

4 - English

More user manuals on ManualsBase.com


XEU ENG 1 27/02/2006 13:33 Page 5

Overviews

Front View of the DVD-VCR (DVD-V5600)

1 2 3 4

5 6 7 8 9 10 11 12 13 14 15 16 17

Front View of the DVD-VCR (DVD-V6600)

1 2 3 4

5 6 7 8 9 10 11 12 13 14 15 16 17

1. DVD DECK. 12. EZ VIEW BUTTON.


2. OPEN/CLOSE BUTTON. 13. RECORD BUTTON.
3. VIDEO CASSETE COMPARTMENT. 14. REWIND/SKIP BACK BUTTON.
4. EJECT BUTTON. 15. STOP BUTTON.
5. STANDBY/ON BUTTON. 16. PLAY/STILL BUTTON.
6. AUX VIDEO INPUT JACK. 17. FAST FORWARD/SKIP NEXT BUTTON.
7. AUX AUDIO L/R INPUT JACK.
8. PROGRESSIVE SCAN MODE BUTTON.
9. FRONT PANEL DISPLAY.
10. PROGRAMME SELECTION BUTTON.
11. DVD/VCR SELECTION BUTTON.

English - 5

More user manuals on ManualsBase.com


XEU ENG 1 27/02/2006 13:33 Page 6

Rear View of the DVD-VCR (DVD-V5600/DVD-V6600)


1 2 3 4

5 6 7 8 9 10

1. AUDIO L, R OUT JACKS. 6. OUT TO TV CONNECTOR.


2. AERIAL IN CONNECTOR. 7. AV1 (EURO AV) IN/OUT SCART.
3. AV2 (DEC./EXT.) IN/OUT SCART (EURO-21) JACK.
(EURO-21) JACK. 8. DIGITAL AUDIO OUT JACKS (COAXIAL).
4. AUDIO L, R OUT JACKS (DVD only). 9. COMPONENT VIDEO OUT JACKS.
5. VIDEO OUT JACK. 10. S-VIDEO OUT JACK.

Display Indicators
1 2 3 4 5

1. The DVD Deck is active.


2. Disc is loaded.
3. The time, counter position, current deck
status is displayed.
4. VHS tape is inserted.
5. The VCR Deck is active.
6. A Timer Recording is programmed or in
progress.

6 - English

More user manuals on ManualsBase.com


XEU ENG 1 27/02/2006 13:33 Page 7

Accessories Tour of the Remote Control


Make sure that the following basic accessories
are supplied with your DVD-VCR.

16
17
1

2 18
Owner’s Batteries for RF-Cable
Instructions remote controls 19
3

20

Audio & Video Remote Control 4 21


Cable 5 22

6
7 23
Inserting Batteries in the Remote
Control 8 24

You must insert or replace the batteries in the


9 25
remote control when you:
• Purchase the DVD-VCR
• Find that the remote control is no longer
working correctly 10 26

1 To release the battery compartment cover, 11


push the tab in the direction of the arrow and
lift up.
12 27
13 28

14 29
15 30

2 Insert two AAA, RO3 or equivalent batteries,


taking care to respect the polarities:
• + on the battery with + on the remote
control.
• – on the battery with – on the remote
control.
Do not mix different battery types (manganese
and alkaline for example).

3 Replace the cover by aligning it with the base


of the remote control and push it down.

English - 7

More user manuals on ManualsBase.com


XEU ENG 1 27/02/2006 13:33 Page 8

1. DVD,VCR 23. PLAY/PAUSE ( )


Used to operate DVD, VCR. Used to play or pause during playback.
2. STANDBY/ON 24. SEARCH ( / )
Used to turn the power on or off. Used to search forward or backward through
3. Number buttons a disc.
4. TIMER 25. PROG
Used to activate the timer recording of Used to select a TV programme.
a programme. 26. RETURN
5. REC ( ● ) Used to return to a previous menu.
Used to make a recording on cassette. 27. ZOOM
6. SKIP ( / ) Used to enlarges picture .
Use to skip a title, chapter or track. 28. CLEAR
7. STOP ( ■ ) Used to clear a preset TV station.
Used to stop during playback. Used to cancel a preset recording.
Used to cancel a preset mark.
8. AUDIO Used to set the tape counter to zero.
Used to access various audio functions. Used to resume normal play during repeat
play.
9. TRK ( ›/ ‚)
Used to adjust picture alignment manually to 29. MARK
obtain the best possible picture during play- Used to mark a position during playback a
back. disc.
10. MENU SEARCH
Used to display the on-screen menu. Used to search for a specific sequence.
11. OK ›/ ‚,¥ / Š 30. MODE
Used to control the cursor in the on-screen Used to select the programme or random
menu and confirm your choice. play.
12. EZ VIEW REPEAT
Used to adjust the aspect ratio on a disc. Used to allow the repeat play a title, chapter,
track, disc or A-B.
13. DISC MENU
Used to display a disc menu.
14. SUBTITLE
Used to change the DVD’s subtitle language.
15. ANGLE
Used to access various camera angles on a
DVD.
IPC (Intelligent Picture Control).
Used to adjust the sharpness of the picture.
16. INPUT SEL.
Used to select a external input signal.
17. TV/VCR
Used to select TV or VCR.
18. INFO.
Used to display the current setting or disc
status.
19. OPEN/CLOSE
Used to open and close the disc and video
cassette tray.
20. SHUTTLE
Used to play a sequence at variable speeds.
21. F.ADV/STEP
Used to advance a sequence frame by
frame.
22. SPEED
Used to select the recording speed.

8 - English

More user manuals on ManualsBase.com


XEU ENG 2 27/02/2006 13:35 Page 9

Connecting DVD-VCR to the TV


C onnections using the SCART Cable
You can connect your DVD-VCR to the televi-
Connecting DVD-VCR to the TV sion using the SCART cable if the appropriate
using the RF Cable input is available on the television. You thus:
To receive television programmes a signal must • Obtain better quality sound and pictures.
be received from one of the following sources: • Simplify the setting up procedure of your
• An outdoor aerial. DVD-VCR.
• An indoor aerial. Note
• A cable television network. • Regardless of the type of connection chosen,
• A satellite receiver. you must always connect the RF Cable supplied.
Note Otherwise, no picture will be visible on the
• Make sure that both the television and the screen when the DVD-VCR is switched off.
DVD-VCR are switched off before connect- • Make sure that both the television and the DVD-
ing the cables. VCR are switched off before connecting the
cables.

1 Remove the aerial or network input cable 1 Connect the Aerial Cable.
from the television.
2 Connect one end of the SCART cable to the
2 Connect this cable to the 75Ω coaxial jack AV1 (EURO AV) jack on the rear of the DVD-
marked on the rear of your DVD-VCR. VCR.

3 Plug the other end into the appropriate


3 Plug the RF Cable supplied into TV the jack connector on the television.
on your DVD-VCR.

4 Plug the other end of the RF Cable into the Connecting the Audio Output
connector previously used for the aerial on Cable
the television. You can connect your DVD-VCR to a Hi-Fi
system. Example: You wish to take advantage of
Aerial
the quality of your Hi-Fi stereo system when
watching a disc play.

4 Plug the audio output cable into the audio


connectors on the rear of your DVD-VCR.

TV
2
5 Plug the other end of the audio cable into the
appropriate input connectors on your Hi-Fi
3
stereo system.

4
4

Aerial
1
RF cable
2
5
TV

3
RF cable

English - 9

More user manuals on ManualsBase.com


XEU ENG 2 27/02/2006 13:35 Page 10

Connecting DVD-VCR to a Satellite Connecting DVD-VCR to the TV


Receiver or Other Equipment using the Audio/Video Cable
You can connect your DVD-VCR to a Satellite You can connect your DVD-VCR to the televi-
receiver or other DVD-VCR using the SCART sion using the audio/video cable if the appropri-
cable if the appropriate outputs are available on ate input is available on the television.
the equipment chosen. The following illustra-
tions give a few examples of the connection 1 Connect one end of the video cable into the
possibilities. VIDEO output jack on the rear of the DVD-
VCR.
1 AV2(EURO AV): By means of 21-pin Scart
Cable 2 Plug the other end of the video cable into the
Plug the SCART Cable with satellite receiver appropriate input connector on the television.
or other equipment into the AV2 (EURO AV)
jack on the rear of the DVD-VCR. 3 Connect one end of the audio cables supplied
After making this connection, select the into the AUDIO output jacks on the rear of the
source by pressing the INPUT SEL. button DVD-VCR.
for the AV2 input sources. • Take care to respect the colour coding of
the left and right channels.
2 By means of RF Cable
After making this connection, you must preset 4 Plug the other end of the audio cables into
the station received through the satellite the appropriate input connectors on the televi-
tuner. sion.

3 AV1 (EURO AV) : By means of 21-pin Scart


Cable
Connect the end of the SCART cable to the
AV1(EURO AV) jack on the rear of the DVD-
VCR. Plug the other end into the appropriate
connector on the television.
3

Aerial

Satellite Receiver or other Equipment


Aerial Connector 1

4
1

TV
2

SCART cable

RF cable

10 - English

More user manuals on ManualsBase.com


XEU ENG 2 27/02/2006 13:35 Page 11

Connecting DVD-VCR to the TV Connecting DVD-VCR to the TV


using the S-Video Cable (DVD only) using the Component Video Cable
You will enjoy high quality images. S-Video (DVD only)
seperates the picture element into black and Your TV must support progressive scan input to
white(Y) and colour(C) signals to present clearer allow you to watch component video output.
images than regular video input mode. You will enjoy high quality accurate colour repro-
duction images. Component video seperates the
1 Connect one end of the S-Video cable into picture element into black and white (Y), blue
the S-VIDEO output jack on the rear of the (Pb), red (Pr) signals to present most clear and
DVD-VCR. clean images.

2 Plug the other end of the S-Video cable into 1 Connect Component video cables between
the appropriate input connector on the televi- the COMPONENT VIDEO OUT jacks on the
sion. rear of the DVD-VCR and COMPONENT
VIDEO IN jacks on the rear of the TV.
3 Connect one end of the audio cables supplied
into the AUDIO LINE output jacks on the rear 2 Connect audio cables between the AUDIO
of the DVD-VCR. LINE OUT jacks on the rear of the DVD-VCR
• Take care to respect the colour coding of and AUDIO IN jacks on the rear of the TV.
the left and right channels. • Take care to respect the colour coding of
the left and right channels.
4 Plug the other end of the audio cables into
the appropriate input connectors on the televi-
sion.

Note
• Use the S-Video connection method only for
the DVD. COMPONENT VIDEO OUT

COMPONENT INPUT

COMPONENT VIDEO IN
2

English - 11

More user manuals on ManualsBase.com


XEU ENG 2 27/02/2006 13:35 Page 12

Progressive Scan (DVD only) AV Receiver Connections


To take full advantage of the movie theater
If the TV connected supports Progressive Scan,
experience that DVD offers, you may want to
press the P.SCAN button on the front panel in
connect your DVD-VCR to a complete Surround
stop mode.
Sound system, including an A/V Receiver and
six Surround Sound speakers. If your A/V
• The message “Press OK to confirm
receiver is equipped with a Dolby Digital
Progressive scan mode. Otherwise press
Decoder, you have the option to bypass the
RETURN.” will be displayed. If you want
DVD-VCR’s built-in Dolby Digital Decoder. Use
Progressive scan mode, select OK. Make sure
the Digital Audio Out connection below.
that the disc has stopped completely before
changing the mode.
1 Connect a Digital Audio coaxial cable from the
Digital Audio Out jacks on the panel of the DVD-
VCR to their corresponding Digital Audio Input
jacks on your A/V Receiver:

• To cancel the progressive scan mode, press


the P.SCAN button in stop mode.

Digital Audio out Jack


Note
• Do not press the P.SCAN button if you are
using a TV that does not support Progressive
mode. Nothing will be displayed on the screen
if pressed. To release the Progressive mode,
press the P.SCAN button in stop mode.
• See your TV User’s Manual to find out if your
TV supports Progressive Scan. If Progressive
Scan is supported, follow the TV User’s
instructions regarding Progressive Scan set-
tings in the TV’s menu system.
• Depending on your TV, the method of connec-
tion may differ from the illustration above.
• What is "Progressive Scan"? Progressive scan
has twice as many scanning lines as the inter- To Digital Audio Input of an A/V Receiver
lace output method has. Progressive scanning with a Dolby, MPEG2, DTS, Digital Decoder
method can provide better and clearer picture
quality.
• You must connect the player to the compo-
nent(s) before using the Progressive Scan fea-
ture.
• Make sure that the colour coded connections
match. That is, the Y, Pb and Pr component
output jacks of your DVD -VCR should be con-
nected to the exact corresponding component
input jacks on your TV. Otherwise, red or blue
images will be displayed on the TV screen.
• NTSC DVD disc is not supported.

12 - English

More user manuals on ManualsBase.com


XEU ENG 2 27/02/2006 13:35 Page 13

Connecting an Audio/Video Input Plug & Auto Setup


Cable Your DVD-VCR will automatically set itself up
You can connect other audio/video equipment to when it is plugged into the mains for the first
your DVD-VCR using audio/video cables if the time. TV stations will be stored in memory. The
appropriate outputs are available on the equip- process takes a few minutes. Your DVD-VCR
ment chosen. will then be ready for use.
Examples :
• You wish to copy a video cassette with the 1 Connect the RF Cable as indicated on page
help of a second VCR. 9. (Connecting Your DVD-VCR to the TV
• You wish to play and/or copy pictures taken using the RF Cable).
with a camcorder.
• Make sure that both the external devices and 2 Plug the DVD-VCR into the mains.
the DVD-VCR are switched off before connect- • “AUTO” in the front panel display flickers.
ing the cables.

1 Connect one end of the video cable into the


VIDEO input jack on the front of the DVD-
VCR.
3 Start the auto setup.
2 Plug the other end of the video cable into the
appropriate output connector on the other
system (VCR or Camcorder, etc).
Auto Setup will be

3 Connect one end of the audio cable supplied started.


Check antenna and TV
into the AUDIO input jacks on the front of the cable connection.
DVD-VCR.
• Take care to respect the colour coding of
OK RETURN MENU
the left and right channels.

4 Plug the other end of the audio cable into the


appropriate output connectors on the other 4 Start the auto scanning.
system (VCR, camcorder, etc). The number of stations automatically stored
by the DVD-VCR depends on the number of
stations that it has found.

Auto Setup

Please Wait
10%
ŠŠ
1

RETURN MENU

English - 13

More user manuals on ManualsBase.com


XEU ENG 2 27/02/2006 13:35 Page 14

5 The current time and date are displayed


automatically.

Clock Set

SETUP

DVD Time Date Year

VCR 12 : 00 01 / JAN / 2006 SUN

Auto Clock : On
PROG

FUNC
OK RETURN MENU

Check the Date and Time if it is :


• Incorrect, refer to “Setting the Date and
Time”. (See page 15)
• Correct, press the RETURN button twice to
exit the menu.

Note
• Now, you only have to switch the DVD-VCR
on and it is ready for use.
• Function for “Plug & Auto Set Up” is fixed already.
So if you want to change this fixed one, you can
change. (refer to “Presetting the Stations Manually”
page 17).

14 - English

More user manuals on ManualsBase.com


XEU ENG 3 27/02/2006 13:36 Page 15

Setting the Date and Time


S ettings Your DVD-VCR contains a 24-hour clock and
calendar used to:
Tuning Your Television for the DVD- • Automatically stop programme recording.
VCR • Preset your DVD-VCR to record a programme
automatically.
You must tune your television for the DVD-VCR You must set the date and time when:
only if you are using the RF cable. • You purchase the DVD-VCR.
To view pictures from your DVD-VCR when a • Do not forget to reset the time when you
Scart cable is used, the television must be set to change clocks from winter to summer time
the audio/video mode (AV). and vice versa.

1 Switch on the television. 1 Press the MENU button, then press the OK or
Š button.
2 Switch on the DVD-VCR by pressing the Setup
/I STANDBY/ON on the front of the DVD-
SETUP Language : English Š
VCR or STANDBY/ON on the remote control.
Clock Š
DVD
Install Š
3 Select a programme position on the television VCR User Set Š

to be reserved for use with your DVD-VCR. PROG


Auto Power Off : Off Š
Screen Messages : On Š
FUNC
4 Insert the video cassette in the DVD-VCR. OK RETURN MENU

Check that the DVD-VCR starts reading the


cassette; if not, press the ŠII button.
2 Press the › or ‚ button to select Clock,
then press the OK or Š button.
5 Start a scan on your television or set the tele- The Clock Set menu is displayed.
vision to UHF channel 60.

6 Fine tune the television until the pictures and 3 Press the ¥ or Š button to select the hour,
minutes, day, month, and year. The selected
sound are obtained clearly.
option is highlighted. Press the › or ‚ button
to set them. The day of the week is displayed
7 When the picture and sound are perfectly automatically. Press the OK button.
clear, store this channel at the desired
programme position on the television. Clock Set
That programme is now reserved for use with SETUP
your DVD-VCR. Time Date Year
DVD

VCR 12 : 00 01 / JAN / 2006 SUN

Auto Clock : On
PROG

FUNC

OK RETURN MENU

• You can hold down the › or ‚button to


scroll more quickly through the values.
• Press the MENU button to exit the menu.

English - 15

More user manuals on ManualsBase.com


XEU ENG 3 27/02/2006 13:36 Page 16

Setting the Clock Automatically Presetting the Stations


4 Press the ¥ or Š button to select Auto Automatically
Clock. Press the › or ‚ button to select On.
You do not need to preset the stations if you
Clock Set have already set them automatically (refer to
SETUP “Plug & Auto Set Up” on page 13).
DVD Time Date Year Your DVD-VCR contains a built-in tuner used to
12 : 00 01 / JAN / 2006 SUN receive television broadcasts.
VCR
Auto Clock : On You must preset the stations received through
PROG the tuner. This can be done:
FUNC • Plug & Auto Set up (refer to page 13).
OK RETURN MENU • Automatically.
• Manually (refer to page 17).
You can store up to 80 stations.

Setting the Menu Language 1 Press the MENU button, then press the
OK or Š button.
1 Press the MENU button, then press the OK or Setup
Š button. SETUP Language : English Š
Clock Š
Setup DVD
Install Š
SETUP Language : English Š VCR User Set Š
Clock Š Auto Power Off : Off Š
DVD PROG
Install Š Screen Messages : On Š
VCR User Set Š FUNC
Auto Power Off : Off Š OK RETURN MENU
PROG
Screen Messages : On Š
FUNC
OK RETURN MENU 2 Press the › or ‚ button to select Install,
then press the OK or Š button.
The Install menu is displayed.
2 Press the OK or Š button again.
The Language Set menu is displayed. Install

SETUP Auto Setup Š


Language Set
DVD Manual Setup Š
Š English
VCR Output : CH60 Š
Français VCR

Deutsch
PROG
Español
FUNC
Italiano
OK RETURN MENU
Nederlands

OK RETURN MENU
3 Press the OK button. A message is displayed,
indicating that any channels already preset on
3 Press the › or ‚ button to select desired your DVD-VCR will be deleted.
language, then press the OK or Š button. Auto Setup
• Press the MENU button to exit the menu.
Your data will be lost

Press OK to continue

MENU to exit

OK RETURN MENU

16 - English

More user manuals on ManualsBase.com


XEU ENG 3 27/02/2006 13:36 Page 17

4 Press the OK button to start the auto scan- Presetting the Stations Manually
ning. The message Please Wait is displayed. You do not need to preset the stations manually
Auto Setup
if you have already set them automatically.

1 Press the MENU button, then press the OK or


Š button.
Please Wait
10% Setup
ŠŠ
SETUP Language : English Š
Clock Š
DVD
RETURN MENU Install Š
VCR User Set Š
Auto Power Off : Off Š
• The first frequency band is scanned and PROG
Screen Messages : On Š
stored, then the DVD-VCR searches for the FUNC
second station and so on. OK RETURN MENU

When the automatic scanning procedure


has finished, the DVD-VCR switches
automatically to programme 1.
2 Press the › or ‚ button to select Install,
then press the OK or Š button.
• If you wish to cancel the auto scanning
The Install menu is displayed.
before the end, press the MENU button.
Install
Note
SETUP Auto Setup Š
• The number of stations automatically stored by the
DVD Manual Setup Š
DVD-VCR depends on the number of stations that
it has found. VCR Output : CH60 Š
VCR

• The time and date are set automatically from the PROG
broadcast signal. If the signal is weak or ghosting
occurs, the time and date may not be set automati- FUNC

cally. In this case, they should be set manually OK RETURN MENU

(refer to page 15).


• Once the auto scanning procedure has finished,
some stations may have been stored more than
3 Press the › or ‚ button to select Manual
once; select the stations with the best reception Setup, then press the OK or Š button.
and delete the ones no longer required (refer to The TV STATION TABLE menu is displayed.
page 18).
4 Press the › or ‚ button to select the
required programme number.

❉ ❉ TV STATION TABLE ❉ ❉
PR CH NAME
1 021 ----
2
3
4
5

›‚Š
Š SWAPPING : OK
DELETE : CLEAR RETURN

5 Press the Š button to preset the station.


The MANUAL TUNING menu will be dis-
played.
Press the ¥ or Š button to start scanning the
channels. The frequency band is scanned and
the first station found is displayed.

English - 17

More user manuals on ManualsBase.com


XEU ENG 3 27/02/2006 13:36 Page 18

❉ ❉ MANUAL TUNING. ❉ ❉
Clearing a Preset Station
PR : 1 If you have stored a TV station:
CH : 021 • That you do not require
MFT : - • At the wrong programme position, you can
NAME : ----
cancel it.

›‚¥
¥Š
Š MEMORY : OK
RETURN
1 Press the MENU button, then press the OK or
Š button.

6 If necessary, press the › or ‚ button to Setup

SETUP Š
select MFT, then press the ¥ or Š button to Language : English
Clock Š
adjust the picture. DVD
Install Š
VCR User Set Š
7 Press the › or ‚ button to select NAME. PROG
Auto Power Off : Off Š
Screen Messages : On Š
The station name is set automatically from the
FUNC
broadcast signal. OK RETURN MENU
• To change the programme’s name, press
the Š button. The first letter of the name
flashes.
2 Press the › or ‚ button to select Install,
then press the OK or Š button.
To... Then... The Install menu is displayed.
Select a character Press the › or ‚button until the
in the name. required character is displayed 3 Press the › or ‚button to select Manual
(letters, numbers or “-” character).
Setup, then press the OK or Š button.
Move to the next Press the ¥ or Š button The TV STATION TABLE menu is displayed.
previous or respectively.
character ❉ ❉ TV STATION TABLE ❉ ❉
PR CH NAME

8 1 021 ----
If you... Then... 2
3
Wish to store the • Press OK to store the 4
station displayed station. 5

Do not wish to • Press the › or ‚button until ›‚Š


Š
DELETE : CLEAR
SWAPPING : OK
RETURN
store the station the CH is selected.
displayed • Press the ¥ or Š button to
go on scanning the 4 Press the › or ‚ button to select required
frequency band and display preset TV station.
the next station.
Press the CLEAR button to delete.

9 Repeat this procedure from step 4 onwards, 5 Repeat the same procedure from step 4
onwards until all the required stations have
until all the required stations have been
been cleared.
stored.

10 Press the MENU button to exit the menu.

18 - English

More user manuals on ManualsBase.com


XEU ENG 3 27/02/2006 13:36 Page 19

Changing the Preset Station Table 6 Press the › or ‚ button to select required
You can rearrange the station table and give position, then press the OK button to swap
different programme numbers to the stations the position.
listed according to your own preferences. For example to move a TV station in
programme 1 to programme 3.
1 Press the MENU button, then press the OK or ❉ ❉ TV STATION TABLE ❉ ❉
Š button. PR CH NAME
1
Setup
2
SETUP Language : English Š 3 021 ----
Clock Š 4
DVD
Install Š
5
VCR User Set Š
›‚Š
Š SWAPPING : OK
Auto Power Off : Off Š DELETE : CLEAR RETURN
PROG
Screen Messages : On Š
FUNC
OK RETURN MENU
• Press the MENU button to exit the menu.

2 Press the › or ‚ button to select Install,


then press the OK or Š button. The Install
menu is displayed.
Install

SETUP Auto Setup Š

DVD Manual Setup Š

VCR Output : CH60 Š


VCR

PROG

FUNC
OK RETURN MENU

3 Press the › or ‚button to Select Manual


Setup, then press the OK or Š button.
The TV STATION TABLE menu is displayed.

4 Press the › or ‚ button to select required


preset TV station. The selected station is dis-
played at the same time on the television
screen.

5 Press the OK button to change the


programme number assigned to a station.

❉ ❉ TV STATION TABLE ❉ ❉
PR CH NAME
1 021 ----
2
3
4
5

›‚Š
Š SWAPPING : OK
DELETE : CLEAR RETURN

English - 19

More user manuals on ManualsBase.com


XEU ENG 3 27/02/2006 13:36 Page 20

Setting the VCR Output Channel


Your DVD-VCR output channel may need to be
changed if the pictures suffer from interference
or if your TV cannot find the pictures.

1 Press the MENU button, then press the OK


or Š button.
Setup

SETUP Language : English Š


Clock Š
DVD
Install Š
VCR User Set Š
Auto Power Off : Off Š
PROG
Screen Messages : On Š
FUNC
OK RETURN MENU

2 Press the › or ‚ button to select Install,


then press the OK or Š button. The Install
menu is displayed.

3 Press the › or ‚button to select VCR


Output CH.

Install

SETUP Auto Setup Š

DVD Manual Setup Š

VCR Output : CH60 Š


VCR

PROG

FUNC
OK RETURN MENU

4 Press the OK or ¥ or Š button to select the


required output channel (CH21~CH69).
➝ CH21 ➝ ..CH60 ➝ ..CH69

• Press the MENU button to exit the menu.


Then tune your television again (see
page 15).
• You can select the required output channel
directly by using the number button.

20 - English

More user manuals on ManualsBase.com


XEU ENG 3 27/02/2006 13:36 Page 21

NICAM
V CR F unctions
NICAM programmes are divided into 3 types.
NICAM Stereo, NICAM Mono and Bilingual (trans-
Selecting the Colour Mode
mission in another language).
Before recording or playing back a cassette, NICAM programmes are always accompanied by a
you can select the required system standard. standard mono sound broadcast and you can
Otherwise, the system automatically selects the select the desired sound. Please refer to page 28.
reception standard when you select AUTO.
• When playing back a cassette, the standard is 1 Press the MENU button, then press the OK or
automatically selected by the DVD-VCR. Š button.
• When you playback an NTSC-recorded tape
on this DVD-VCR make a setting on the colour Setup

system according to your TV. If your TV is a SETUP Language : English Š


Clock Š
PAL system only TV, set NTPB. If your TV is DVD
Install Š
multi system TV (NTSC 4.43 compatible), set VCR User Set Š
NT4.43 and you can record NT4.43. Auto Power Off : Off Š
PROG
Screen Messages : On Š

1 Press the MENU button, then press the OK FUNC


OK RETURN MENU
or Š button.

SETUP
Setup
2 Press the › or ‚ button to select User Set,
Š
Language : English
then Press the OK or Š button.
Clock Š
DVD
Install Š The User Set menu is displayed.
VCR User Set Š
Auto Power Off : Off Š
PROG User Set
Screen Messages : On Š
SETUP Colour System : Auto Š
FUNC
OK RETURN MENU DVD NICAM : On Š

IPC : On Š
VCR

2 Press the › or ‚ button to select User Set, PROG


then press the OK or Š button.
FUNC
The User Set menu is displayed.
OK RETURN MENU

User Set

SETUP Colour System : Auto Š


3 Press the › or ‚ button to select NICAM, then
DVD NICAM : On Š
press the OK or Š button to select On or Off.
VCR
IPC : On Š
• On (for NICAM mode):
PROG
Normally set at this position
FUNC • Off (for MONO mode):
OK RETURN MENU Only set at this position to record the standard
mono sound during a NICAM broadcast if the
3 Press the OK or Šbutton to select required stereo sound is distorted due to inferior
colour system. Auto ➝ PAL ➝ B/W reception conditions.
• Auto: When playing back a cassette,
the system standard is automatically
selected by the DVD-VCR.
• B/W: Black and White.

English - 21

More user manuals on ManualsBase.com


XEU ENG 3 27/02/2006 13:36 Page 22

Intelligent Picture Control Auto Power Off


This feature allows you to adjust the sharpness This feature automatically turns off your DVD-
of the image automatically, according to your VCR if no signal is received and you do not
own preferences. press any button for the selected time.

1 During playback, press the MENU button, 1 Press the MENU button, press the OK or Š
then press the OK or Š button. button.

2 Press the › or ‚ button to select User Set, SETUP


Setup

Language : English Š
then press the OK or Š button.
Clock Š
The User Set menu is displayed. DVD
Install Š
VCR User Set Š

3 Press the › or ‚ button to select IPC PROG


Auto Power Off : Off Š
Screen Messages : On Š
(Intelligent Picture Control), then press the OK
FUNC
or Š button. OK RETURN MENU

User Set

SETUP Colour System : Auto Š 2 Press the › or ‚ button to select Auto


DVD NICAM : On Š Power Off.
IPC : On Š
VCR
Setup

PROG SETUP Language : English Š


Clock Š
FUNC DVD
Install Š
OK RETURN MENU
VCR User Set Š
Auto Power Off : Off Š
• You can select the modes simply by press- PROG
Screen Messages : On Š

ing the IPC button. FUNC


OK RETURN MENU

4 To adjust the sharpness manually, press the


‚ button to turn the IPC mode OFF. 3 Press the OK or Š button to select the
The sharpness of the picture is adjusted preset interval.
manually.
Press the ¥ or Š buttons until the picture is ➝ Off ➝ 1 Hour ➝ 2 Hour ➝ 3 Hour
displayed according to your preferences.
• Press the MENU button to exit the menu.
❉ ❉ PICTURE ❉ ❉

IPC : OFF

SOFTEN SHARPEN

¥Š
Š ON/OFF : ‚

22 - English

More user manuals on ManualsBase.com


XEU ENG 3 27/02/2006 13:36 Page 23

Screen Messages Selecting the Cassette Type


Your DVD-VCR displays most information both If you wish to use the tape counter to display the
the DVD-VCR and the television. time remaining on a cassette, you must indicate
You can choose to display or hide this information the type of cassette inserted.
on the television screen (If you configure the
Screen Message to Off, the Fast Forward and 1 Press the MENU button, then press the › or
Rewind messages will not be displayed on the ‚ button to select VCR.
screen. However, the Search Message will not be
displayed on the screen regardless of the Screen 2 Press the OK or Š button.
Message configuration). The Tape Select is highlighted.

1 Press the MENU button, then press the OK or VCR Setup

Š
SETUP Tape Select : E180
Š button.
Repeat Play : Off Š
DVD
Setup
VCR
SETUP Language : English Š
Clock Š PROG
DVD
Install Š
VCR FUNC
User Set Š
OK RETURN MENU
Auto Power Off : Off Š
PROG
Screen Messages : On Š
FUNC
OK RETURN MENU
3 Press the OK or Š button to select the
correct cassette length.
➝ E180 ➝ E240 ➝ E260 ➝ E300
2 Press the › or ‚ button to select Screen
Messages.
• Press the MENU button to exit the menu.
Setup

SETUP Language : English Š

DVD
Clock Š Repeat Play
Install Š
VCR User Set Š You can set repeat play to repeat the tape
PROG
Auto Power Off : Off Š continously from beginning to end.
Screen Messages : On Š

FUNC
OK RETURN MENU
1 Press the MENU button, then press the › or
‚ button to select VCR.
3 Press the OK or Š button to select On or Off. 2 Press the OK or Š button, then press the
• On : Select to display on-screen information.
›or‚ button to select Repeat Play.
• Off : Select to hide on-screen information.
Press the OK or Š button to select On or Off.
• Press the MENU button to exit the menu.
VCR Setup

SETUP Tape Select : E180 Š

Repeat Play : Off Š


DVD

VCR

PROG

FUNC
OK RETURN MENU

• On: Repeat play.


• Off: Do not wish to repeat play.

English - 23

More user manuals on ManualsBase.com


XEU ENG 4 27/02/2006 13:36 Page 24

Selecting the Recording Speed Recording a Programme


You can record a cassette at two different Immediately
speeds:
Before recording a programme, you must have
• SP (Standard Play)
preset the corresponding station (unless you are
• LP (Long Play)
recording via an external video source). If you
In Long Play modes:
have not done so, refer to pages 16~17.
• Each cassette lasts twice as long
• The recording is of a slightly lower quality
1 Switch on the television.
1 Press the SPEED button to select SP or LP. 2 Insert the video tape in to the VCR deck, with
• The selected record speed will appear on
the window visible and the safety tab intact or
the front panel display.
the opening covered with adhesive tape. The
DVD-VCR is switched on automatically.

3 Select the station by pressing the PROG


( or ) button or select the source (AV1,
AV2 or AUX) by pressing the INPUT SEL.
Type Recording Time (in SP) button for a satellite tuner or external video
source. The station number is displayed and
E180 180 mins. or 3 hours the programme can be seen on the television.
E240 240 mins. or 4 hours
E260 260 mins. or 4 hours and 20 mins.
4 Select the recording speed by pressing the
SPEED button as many times as required.
E300 300 mins. or 5 hours

5 Hold down the REC (●) button for a while to


Protecting a Recorded Cassette start recording.
The record indicator appears on the television
Video cassettes have a safety tab to prevent
and DVD-VCR display. An index is recorded
accidental erasure. When this tab has been
on the tape (Refer to page 30).
removed, you cannot record on the tape.

1 If you wish to protect a cassette, break off the 6 To stop recording, press the ■ button once.
• If your DVD-VCR ejects the cassette when
tab using a small screwdriver.
you start recording, check to make sure
that the cassette’s safety tab is intact or
that the opening (Created by a broken
safety tab) is overed with adhesive tape.
• If you reach the end of the tape while
2 To re-record over a protected cassette (safety recording, the cassette rewinds
tab broken), cover the hole with adhesive
automatically.
tape.

24 - English

More user manuals on ManualsBase.com


XEU ENG 4 27/02/2006 13:36 Page 25

Recording a Programme with Recording from Another VCR or


Automatic Stop Camcorder
This function enables you to record up to nine You can copy a cassette to your DVD-VCR from
hours (LP) of programmes.Your DVD-VCR stops another video source, such as another VCR or a
automatically after the requested length of time. Camcorder etc.
• It is an infringement of copyright laws to copy
1 Switch on the television. prerecorded cassettes or to re-record them in
any form without the permission of the owners
2 Insert the cassette on which the programme of the corresponding copyright.
is to be recorded, with the window visible and
the safety tab intact or the opening covered 1 Connect the output jack of your external
with adhesive tape. The DVD-VCR is devices to the SCART input connector or AUX
switched on automatically. on the front or rear of the DVD-VCR.

3 Select the station to be recorded by pressing 2 Insert a blank cassette in your DVD-VCR.
the PROG( or ) button or select the
source (AV1, AV2 or AUX) by pressing the 3 Insert the pre-recorded cassette in the other
INPUT SEL. button for a satellite tuner or video source (VCR or Camcorder etc).
external video source. The station number is
displayed and the programme can be seen on 4 Press the INPUT SEL. button to select the
the television. appropriate input on your DVD-VCR:
• AV1, AV2 for the SCART input.
4 Select the recording speed by pressing the • AUX for the RCA input.
SPEED button as many times as required
(Refer to page 24). 5 Start playing back the cassette to be copied.
5 Hold down the REC (●) button for a while to 6 Hold down the REC (●) button for a while to
start recording. The record indicator appears start recording on your DVD-VCR.
on the television screen and DVD-VCR dis-
play. An index is recorded on the tape (Refer 7 When you have finished recording, press the
to page 30). ■ button on both VCR and DVD-VCR.
• If you wish to view the cassette being
6 Press the REC (●) button several times to copied, your DVD-VCR must be connected
increase the recording time in: as usual to the television (Refer to page 9
• 30-minute intervals up to four hours. for further details).
• 1-hour intervals up to nine hours.
The length is displayed on the television dis-
plays. The selected programme is recorded
for the length of time requested. At the end of
that time, the DVD-VCR stops recording auto-
matically and power off.

LENGTH 2:30

SET LENGTH :
PRESS REC ●

7 If you wish to cancel the recording before the


end, press the STANDBY/ON button.
• If the end of the tape is reached while
recording, the recording stops and power off.

English - 25

More user manuals on ManualsBase.com


XEU ENG 4 27/02/2006 13:36 Page 26

Using the Assemble Edit Function Using The Timer Programming


This function allows you to start a new recording Feature
at a specific position on the cassette while main- The Timer Programming feature allows you to
taining a very smooth scene change. preset the DVD-VCR to record a programme up
to one month before that programme is to be
1 Insert the cassette to be edited in your broadcast. Up to six programmes can be preset.
DVD-VCR. • Before presetting a recording, check that the
Date and Time are correct.
2 Press the Šll button to start playback. • You must check that the cassette tape is
loaded.
3 When you reach the position from which you
wish to start the new recording, 1Press the MENU button, then press the › or
press the Šll button. ‚ button to select PROG.

4 Press the F.ADV/STEP button as often as Timer Method

SETUP
necessary to advance frame by frame, until If you want to set the
the exact recording position is located. DVD
timer program, press
VCR
the OK key.
5 While the DVD-VCR is in still mode, hold PROG
down the REC (●) button for a while to acti-
FUNK
vate the assemble edit function. The mode is
OK RETURN MENU
changed to pause.

6 Select the source from which you wish to 2 Press the OK or Š button. The timer pro-
record by pressing: gramming menu is displayed.
• The PROG or button for television
channels. 3 Press the OK or Š button to select PR, then
• The INPUT SEL. button for the AV1,AV2 press the ›or‚ button to select the required
or AUX. station.
• Press the INPUT SEL. button to select an
7 Press the Šll button to start recording. input source (AV1, AV2 or AUX) other then
If you want to finish the recording, press the the tuner.
■ button.
4 Press the Š button to select Day, then press
the › or ‚ button to select the required day.

PR Day Start Stop Speed V/P

01 SU 01 : :
: :
: :
: :
: :
: :

OK RETURN MENU

26 - English

More user manuals on ManualsBase.com


XEU ENG 4 27/02/2006 13:36 Page 27

• DLY : Daily 9 When you have finished, press the OK button


• W-SU : Weekly Sunday to set the Timer Programming.
• W-MO Weekly Monday
10 Press the MENU button to exit the menu.
• W-SA Weekly Saturday
• SU 01 : Sunday 01 11 Press the STANDBY/ON button to activate
the timer.
5 Press the Š button to select Start (Start time
of recording).
PR Day Start Stop Speed V/P

01 SU 01 13: : 25 :
: : Before starting recording, the DVD-VCR
: : compares the timer duration with the
: :
remaining time on the cassette.
: :
: :

Checking a Preset Recording


OK RETURN MENU

You can check your preset recordings:


• When you have finished presetting the DVD-
6 Press the Š button to select Stop (Recording VCR
stop time).
• Press the ¥ or Š button to select the hour • If you have forgotten which programmes will
or minute. be recorded.
• Press the › or ‚ button to set the stop
time. 1 Press the MENU button, then press the › or
‚ button to select PROG.
7 Press the Š button to select Speed The Timer Method menu is displayed.
(Recording speed). Timer Method

PR Day Start Stop Speed V/P SETUP

01 SU 01 13 : 25 19 : 57 SP DVD
: : If you want to set the

: : VCR timer program, press


: :
PROG the OK key.
: :
: : FUNC

: : OK RETURN MENU

OK RETURN MENU

2 Press the OK or Šbutton. The list of preset


• Press the ›or ‚ button to select the recodings is displayed with the corresponding
required recording speed. information.
• Auto ➝ SP (Standard Play) ➝ LP (Long
PR Day Start Stop Speed V/P
Play)
01 SU 01 13 : 25 19 :: 57 SP Off
• Auto Tape Speed Select
-- -- -- -- ::-- --: :-- -- --
The DVD-VCR’s “Auto Tape Speed Select” : :
: :
function compares the duration of the timer
: :
recording to the actual recording time remain- : :
ing on the tape loaded. If there is insufficient
tape to complete a timer recording in Auto OK RETURN MENU

mode, the DVD-VCR automatically switches


to LP mode to record the whole programme. • It can be displayed simply by pressing the
TIMER button on the remote control.
8 Press the Š button to select V/P (VPS/PDC).
• Press the › or ‚ button to select On or
Off.

English - 27

More user manuals on ManualsBase.com


XEU ENG 4 27/02/2006 13:36 Page 28

3 To change any values, select the required


programme by pressing the › or ‚ button,
then change any values as required. For
more details refer to page 26. (Step 2 to 9).
• Press the MENU button to exit the menu.

Cancelling a Preset Recording


You can cancel any programmes that are:
• Incorrect
• No longer required

1 Press the MENU button, then press the › or


‚ button to select PROG . The Timer
Method menu is displayed.

Timer Method

SETUP
If you want to set the
DVD
timer program, press
VCR
the OK key.

PROG

FUNK

OK RETURN MENU

2 Press the OK or Šbutton. The list of preset


recodings is displayed with the corresponding
information.
• It can be displayed simply by pressing the
TIMER button on the remote control.

3 Press the › or ‚ button to select the


programme to be cancelled,then press the
CLEAR button .

PR Day Start Stop Speed V/P

-- -- -- -- ::-- -- :: -- -- --
: :
: :
: :
: :
: :

OK RETURN MENU

• All the recording information is deleted and


broadcast will not be recorded.
• Press the MENU button to exit the menu.

28 - English

More user manuals on ManualsBase.com


XEU ENG 4 27/02/2006 13:36 Page 29

Selecting the Audio Output Mode


P laying Back You can select the mode in which the sound is
reproduced on the loudspeakers and AV outputs.
Playing a Cassette The following options are available.
This function allows you to play any pre- Press the AUDIO button on the remote control
recorded cassette. until the required option is displayed.
➝ L ➝ R ➝ MIX ➝ MONO ➝ L R
1 Switch on both the television and your
DVD-VCR.
Option Description
2 If the safety tab on the cassette is removed, L Used to listen to the sound on the left Hi-Fi channel.
the cassette is played automatically. R Used to listen to the sound on the right Hi-Fi
• When a cassette is loaded, the tape position channel.
is optimized automatically to reduce MIX Used to listen to the mixed sound of the Hi-Fi and
disturbance (Digital Auto Tracking). normal channels.

• When playing a cassette, if the end of the MONO Used to listen to the sound on the normal mono
channel.
tape is reached, the cassette is rewound
automatically. NTSC tapes can be played LR Used to listen to Hi-Fi stereo sound on the left
and right channels
back but cannot be recorded with this DVD- • When playing back tapes recorded in Hi-Fi, the
VCR. sound switches to Hi-Fi after five seconds of Mono.

3 Press the ■ (stop) button to stop the


playback. Playing a Cassette in Slow Motion
Press the (eject) button to eject the You can play a cassette in slow motion.
playback. • No sound is heard when playing back a
cassette in slow motion.

Adjusting Picture Alignment 1 Press the :


• Šll button to start playing the cassette.
Manually
• Šll button again to make still mode.
This feature allows you to adjust the alignment • ŠŠ button to start slow mode.
manually to obtain the best possible picture. • ¥¥ or ŠŠ button as many times as
When noise bars or streaks appear during play- required to decrease or increase the
back, adjust alignment manually by pressing the speed respectively.
TRK (› or ‚) button until the picture is clear • Šll button twice to return to the normal
and stable. speed.
• The tracking bar appears. • The slow motion feature does not support
• The image is adjusted. running video backwards.

2 When playing back in slow motion, picture


interference may occur.
Press the TRK (› or ‚) button to minimize
this effect.
• When you have been using the Slow Motion
function for more than about two minutes,
the DVD-VCR will automatically play to
protect the:
- Cassette.
- Video heads.

English - 29

More user manuals on ManualsBase.com


XEU ENG 4 27/02/2006 13:36 Page 30

Playing a Sequence Frame by Searching for a Specific Sequence


Frame Each time you record a cassette on this DVD-
You can VCR, an “index” is automatically marked on the
• Stop the cassette at a given frame (image) tape when recording starts. The Search function
• Advance one frame at a time allows you to fast-forward or rewind to a specific
No sound is heard when playing back frame by index and start playback from that point.
frame. Depending on the direction selected, the index-
es are numbered as follows:
1 Press the :


• Šll button to start playing the cassette. Prev Seq. being Next
• Šll button again to make still mode. etc. Seq. played Seq. etc.
• F.ADV button to advance frame by frame.
• Šll button to return to normal playback. 2 1 1 2
• Vertical stability: When playing back frame
by frame, interference may be seen on the • This DVD-VCR uses a standard indexing
screen. Press the TRK (› or ‚) button to system (VISS). As a result, it will recognize
minimize this effect. any indexes marked by other VCRs using the
same system and vice versa.

Go To [0:00:00] Stop
Playing a Sequence at Variable Use this feature when you want to search for
Speeds the 0:00:00 counter position on a cassette.
Press the CLEAR button at the point on the
You can vary the playback speed using the
tape where you want to set the counter to
Shuttle function (up to nine times the normal
0:00:00. The VCR will rewind or fast forward,
speed). Example: You wish to analyse a sports
searching for the 0:00:00 counter position, and
person’s technique, movement by movement.
then automatically stop at that position.
• No sound is heard when playing a sequence
at variable speeds.
1 Press the MENU button, then press the › or
‚ button to select FUNC. The Function
1 Press the : menu is displayed. Press the OK or Š button.
• Šll button to start playing the cassette.
• SHUTTLE (<<) button to play the cassette
backwards.
2 Press the › or ‚ button to select VCR
Function, then press the OK or Š button.
• SHUTTLE (>>) button to play the cassette
The VCR Function menu is displayed with
forwards.
the Go To [0:00:00] selected.
2 Each time you press the SHUTTLE button, VCR Function

the speed is changed as shown in the SETUP Go To [0:00:00]

following illustration. DVD End Search

VCR Intro Scan


REVERSE REVERSE REVERSE SLOW SLOW PLAY PLAY PLAY
PLAY PLAY PLAY STILL MOTION MOTION PLAY X3 X5 X9 PROG

X9 X5 X3 X1/10 X1/5 FUNC

OK RETURN MENU

• It can be displayed simply by pressing the


SEARCH button.

3 Press the OK or Š button again.

30 - English

More user manuals on ManualsBase.com


XEU ENG 4 27/02/2006 13:37 Page 31

End Search 4 When an Index mark is found the DVD-VCR


Use this feature when you want to search for a will playback the tape for 5 seconds, after
blank position to record a program on a cassette. which it will continue searching for the next
The VCR will fast forward, searching for a blank Index mark
position, and then automatically stop at that
position. If the VCR reaches the end of the tape INTRO SCAN : ¥¥

during end search, the tape will be ejected.

1 Press the SEARCH button. The VCR 5 If you want to watch the tape from a
Function menu is displayed. Press the › or particular Index, press the Šll button twice.
‚ button to select End Search.
VCR Function
Index Skip Search
SETUP Go To [0:00:00] This feature will enable you to fast
DVD End Search forward/rewind to a specific point on a tape: e.g.
Intro Scan If you have recorded 3 different programmes on
VCR
a tape and you have rewound the tape to the
PROG
beginning, by using this feature you can go
FUNC
directly to the start of programme 2 simply by
OK RETURN MENU
pressing the SEARCH button.

2 Press the OK or Š button. 1 Press the SEARCH button.


The VCR Function menu is displayed.
Press the ›or‚button to select Intro Scan.
Intro Scan VCR Function

1 Press the SEARCH button. SETUP Go To [0:00:00]

The VCR Function menu is displayed. DVD End Search

Press the › or ‚ button to select Intro Scan. VCR


Intro Scan

VCR Function PROG

SETUP Go To [0:00:00] FUNC

DVD End Search OK RETURN MENU

Intro Scan
VCR

PROG
2 Press the OK or Š button.
FUNC

OK RETURN MENU
3 Press the ¥¥ or ŠŠ button twice more.
4 These Index searches can be made forwards
2 Press the OK or Š button. (press the ŠŠ button) or backwards (press
the ¥¥ button).
3 Press the ¥¥ or ŠŠ button depending on (¥¥ -20 ● ● 0 ● ● +20 ŠŠ)
the direction where your desired programme is This will take you directly to the start of the
located. desired programme is located.

INTRO SCAN : ¥¥ ŠŠ
INDEX SEARCH : ¥¥ -06

To cancel an Index search simply press the


Šll or ■ button.

English - 31

More user manuals on ManualsBase.com


XEU ENG 4 27/02/2006 13:37 Page 32

Using the Tape Counter


The tape counter:
• Indicates the elapsed time in the play and
record modes (Hours, Minutes and Seconds).
• Is reset when a cassette is inserted in the
DVD-VCR.
• Allows you to find the beginning of a sequence
easily.
• If the remaining time is to be calculated
correctly, you must indicate the type of
cassette being used.

1 Insert a cassette in your DVD-VCR.


To set the tape counter to zero at the begin-
ning of a sequence:

0:00:00

• Press the INFO button twice to display the


counter.
• Press the CLEAR button when you want to
set the tape counter to zero.

2 When you are ready,


• Start Playback or Recording.
• Press the ■ button.
• To fast-froward or rewind to the sequence at
which the counter was set to zero, press the
¥¥ or ŠŠ button.
• Some DVD-VCR information, such as the
counter, can be displayed on the television
screen (Unless you have deactivated the
Screen Messages mode; refer to page 23).

Press the INFO button:


• Once to display the current function,
programme number, recording speed, time
and counter.
• Twice to display the counter only.
• Three times to display the time remaining on
the cassette.
• Four times to clear the display.

32 - English

More user manuals on ManualsBase.com


XEU ENG 5 27/02/2006 13:37 Page 33

Using the Audio Language


D VD F unctions 1 Press the MENU button in the stop mode.
Press the › or ‚ button to select DVD, then
Setting Up the Language Features press the OK or Šbutton.
If you set disc menu, audio and subtitle lan-
DVD Setup
guage in advance, it will come up automatically
SETUP Language Setup Š
every time you watch a movie.
DVD Audio Setup Š

Display Setup Š
VCR
Using the Disc Menu Language Parental Setup : Š
PROG
1 Press the MENU button in the stop mode. FUNC
DivX(R) Registration Š

Press the › or ‚ button to select DVD, then OK RETURN MENU


press the OK or Šbutton.
DVD Setup

SETUP Language Setup Š 2 Press the OK or Šbutton again.


DVD Audio Setup Š Press the › or ‚button to select Audio,
VCR
Display Setup Š then press the OK or Šbutton.
Parental Setup : Š
PROG Language Setup
DivX(R) Registration Š
FUNC
Disc Menu : English Š
OK RETURN MENU
Audio : English Š

Subtitle : English Š

2 Press the OK or Šbutton again.


Press the › or ‚button to select Disc
Menu, then press the OK or Š button. OK RETURN MENU

Language Setup

Disc Menu : English Š 3 Press the › or ‚ button to select the


Audio : English Š required language.
Subtitle : English Š
Audio Language

Š English
Français
Audio Deutsch
OK RETURN MENU Español
Italiano
Nederlands
3 Press the › or ‚ button to select the Original

required language. Others


OK RETURN MENU

Disc Menu Language


• Select Original if you want the default
Š English
Français soundtrack language to be the original
Disc Menu
Deutsch language the disc is recorded in.
Español
• Select Others if the language you want is
Italiano
Nederlands not listed.
Others

OK RETURN MENU
4 Press the OK button.
• Select Others if the language you want is
not listed.

English - 33

More user manuals on ManualsBase.com


XEU ENG 5 27/02/2006 13:37 Page 34

Using the Subtitle Language Setting Up the Audio Options


1 Press the MENU button in the stop mode. 1 Press the MENU button in the stop mode.
Press the › or ‚ button to select DVD, then
Press the › or ‚ button to select DVD, then
press the OK or Šbutton.
press the OK or Šbutton.
DVD Setup
DVD Setup
SETUP Language Setup Š
SETUP Language Setup Š
DVD Audio Setup Š
DVD Audio Setup Š
Display Setup Š
VCR Display Setup Š
Parental Setup : Š VCR
PROG Parental Setup : Š
DivX(R) Registration Š PROG
FUNC DivX(R) Registration Š
FUNC
OK RETURN MENU
OK RETURN MENU

2 Press the OK or Šbutton again. 2 Press the › or ‚button to select Audio


Press the › or ‚button to select Subtitle,
Setup, then press the OK or Šbutton. The
then press the OK or Šbutton.
Audio Setup menu is displayed.
Language Setup
Audio Setup
Disc Menu : English Š Dolby Digital Out : PCM Š
Audio : English Š MPEG-2 Digital Out : PCM Š
Subtitle : English Š DTS : Off Š
Dynamic Compression : On Š
PCM Down Sampling : On Š

OK RETURN MENU
OK RETURN MENU

3 Press the › or ‚ button to select the


3 Press the › or ‚ button to select the
required language.
required item.
Subtitle Language

Automatic
Š English
4 Press the OK or Šbutton to select the
Français required option.
Subtitle
Deutsch
Español
Italiano Dolby Digital Out
Nederlands
Others
• PCM: Converts to PCM (2CH) audio.
Select PCM when using the Analog
OK RETURN MENU Audio Outputs.
• Bitstream: Converts to Dolby Digital Bitstream
• Select Automatic if you want the subtitle (5.1CH).Select Bitstream when
language to be the same as the language using the Digital Audio Output.
selected as the audio language.
Note
• Select Others if the language you want is
• Be sure to select the correct Digital Output or no
not listed.
audio will be heard.

4 Press the OK button.


MPEG-2 Digital Out
Note • PCM: Converts to PCM (2CH) audio.
• Some discs may not contain the language you Select PCM when using the Analog
select as your initial language; in that case the disc Audio Outputs.
will use its original language setting. • Bitstream: Converts to MPEG-2 Digital
Bitstream (5.1CH or 7.1CH).
Select Bitstream when using the
Digital Audio Output.

34 - English

More user manuals on ManualsBase.com


XEU ENG 5 27/02/2006 13:37 Page 35

DTS 2 Press the › or ‚ button to select Display


• Off: Doesn’t output digital signal. Setup, then press the OK or Šbutton.
• On: Outputs DTS Bitstream via digital output
Display Setup
only. Select DTS when connecting to a
TV Aspect : 4:3 L-Box Š
DTS Decoder.
Black Level : Off Š
Dynamic Compression NTSC Disc Output : PAL60 Š

DVD Out : RGB Š


• On: To select dynamic compression.
• Off: To select the standard range.
OK RETURN MENU
PCM Down Sampling
• On: Select this when the amplifier connected 3 Press the › or ‚ button to select TV Aspect,
to the player is not 96KHz compatible. In press the OK or Šbutton.
this case, the 96KHz signals will be down
converted to 48KHZ. TV Aspect

• Off: Select this when the amplifier connected Š 4:3 Letter Box
to the player is 96KHz compatible. In
this case, all signals will be output with 4:3 Pan Scan

out any changes.


16:9 Wide

Note
OK RETURN MENU
• How to make the DVD menu disappear or return to
menu screen during set up; Press RETURN or ¥
button.
• Manufactured under license from Dolby
4 Press the › or ‚ button to select the
Laboratories. “Dolby” and the double-D symbol are
required item, then press the OK button to
trademarks of Dolby Laboratories. select the required option.
• “DTS” and “DTS Digital Out” are trademarks of
Digital Theater Systems, Inc.
TV Aspect
Depending on the type of television you have,
you may want to adjust the screen setting
Setting Up the Display Options (Aspect Ratio).
1 Press the MENU button in the stop mode. • 4:3 Letter Box :
Press the › or ‚ button to select DVD, then Select when you want to see the total 16:9
press the OK or Šbutton. ratio screen DVD supplies, even though you
have a TV with a 4:3 ratio screen. Black bars
DVD Setup will appear at the top and bottom of the
SETUP Language Setup Š screen.
DVD Audio Setup Š
• 4:3 Pan Scan :
Display Setup Š
VCR Select this for conventional size TVs when
Parental Setup : Š
PROG
DivX(R) Registration Š
you want to see the central portion of the 16:9
FUNC screen. (Extreme left and right side of movie
OK RETURN MENU picture will be cut off).
• 16:9 Wide :
You can view the full 16:9 picture on your
widescreen TV.

Black Level
Adjusts the brightness of the screen (On/Off).

English - 35

More user manuals on ManualsBase.com


XEU ENG 5 27/02/2006 13:37 Page 36

NTSC Disc Output Create Password

“NTSC” if the screen only has one NTSC-video


entrance. If this is not the case, you can choose
to leave “PAL60” as is. Enter Password

DVD Out – – – –

• RGB: Sends RGB signal from the AV JACK


RETURN
(SCART terminal).
• S-Video: Sends S-VIDEO signal from the The Re-enter Password menu is displayed to
AV JACK (S-Video terminal). confirm the password.
• Video: Sends COMPOSITE VIDEO signal
from the AV JACK (SCART terminal). Create Password

Re-enter Password

Setting Up the Parental Control – – – –

The Parental Control function works in conjunc-


tion with DVDs that have been assigned a rating RETURN
which helps you control the types of DVDs that
your family watches. There are up to 8 rating
levels on a disc. 4 Enter your password again.
The Use Password is set to Yes and the
1 Press the MENU button in the stop mode. Parental Setup menu is displayed.
Press the › or ‚ button to select DVD, then The DVD-VCR is locked ( ).
press the OK or Šbutton. Press the › or ‚
Parental Setup
button to select Parental Setup.
Use Password : Yes Š
DVD Setup
Rating Level :1 Š
SETUP Language Setup Š Change Password Š
DVD Audio Setup Š

Display Setup Š
VCR
Parental Setup : Š
PROG
DivX(R) Registration Š
FUNC OK RETURN MENU

OK RETURN MENU

2 Press the OK or Šbutton. Setting up the Rating Level


The Use Password menu is displayed. 5 Press the › or ‚ button to select Rating
Parental Setup Level, then press the OK or Š button.

Parental Setup
Use Password : No Š
Use Password : Yes Š

Rating Level :1 Š

Change Password Š

OK RETURN MENU

OK RETURN MENU
3 Press the OK or Šbutton again if you want
to use a password. The Enter Password
menu is displayed. Enter your password by
pressing the number buttons.

36 - English

More user manuals on ManualsBase.com


XEU ENG 5 27/02/2006 13:37 Page 37

Rating Level DivX(R) Registration


Level 8 Adult
Level 7
Please use your registration code to register
Level 6 this DVD-VCR with the DivX(R) Video On
Level 5
Demand service. This will allow you to rent and
Level 4
Level 3 purchase videos using the DivX(R) Video On
Level 2 Demand format. To learn more go to
Level 1 Kids Safe
www.divx.com/vod.
OK RETURN MENU

6 Press the › or ‚ button to select the required 1 Press the MENU button in the stop mode.
level (e.g. Level 6). Press the OK or Š button. Press the › or ‚ button to select DVD.
• Discs that contain Level 7 will now not play. The DVD Setup menu is displayed.
DVD Setup
Changing the Password SETUP Language Setup Š
7 Press the › or ‚ button to select Change DVD Audio Setup Š
password. Display Setup Š
VCR
Parental Setup : Š
Parental Setup
PROG
DivX(R) Registration Š
Use Password : Yes Š FUNC

Rating Level :1 Š
OK RETURN MENU
Change Password Š

2 Press the OK or Š button. Press the › or ‚


button to select DivX(R) Registration.

OK RETURN MENU DVD Setup

SETUP Language Setup Š

8 The Enter New Password is displayed. Enter DVD Audio Setup Š

Display Setup Š
your password by pressing the number buttons. VCR
Parental Setup : Š
PROG
Change Password DivX(R) Registration Š
FUNC

OK RETURN MENU

Enter New Password


3 Press the OK or Š button. A message is dis-
– – – –
played.
DivX(R) Registration
RETURN
Your registration code is: XXXXXXXX .
Please use this code to register this
The Re-enter Password is displayed to player with the DivX(R) Video On Demand
confirm the password. service. This will allow you to rent and
purchase videos using the DivX(R) Video
Change Password
On Demand format. To learn more go to
www.divx.com/vod.

RETURN MENU
Re-enter Password

– – – –

DivX, DivX Certified,


RETURN and associated logos
are trademarks of
DivXNetworks, Inc and
9 Enter your password again. are used under license.
• How to make the DVD menu disappear or
return to menu screen during set up; Press
the RETURN or ¥ button.
• If you have forgotten your password, refer to
Forgot Password in the Troubleshooting
Guide.
37 - English English - 37

More user manuals on ManualsBase.com


XEU ENG 5 27/02/2006 13:37 Page 38

Firmware Upgrade How to make an update disc


Please read the below information before Write the downloaded file onto a blank CD-R
update procedure. disc, using the following settings.

1 The following events may interrupt the update 1 Download the software update file from the
procedure and may result in permanent Samsung Internet Site
damage to DVD-VCR. (http://www.samsung.com/Support/Product
• Unplugging the power cord. Support/Download/index. aspx).
• Power outage. After checking your DVD-VCR Model name
• Dirt or Scratch in the discs. on the rear, download a file using the Search
• Open a tray door during processing. Your Model/Name window.

2 Playback can only support English Subtitle. 2 Write the file to disc using CD-R driver of your
If you have any question or any problem, computer.
please feel free to contact your nearest Software update file name: samca.rom
SAMSUNG Service Center and agency. Please do not change the file name.
If you change the file name, DVD-VCR do not
DivX Feature Table recognize the update CD-R.
• A DivX disc may not be playable as playback
depends on the file format, the recording
Note
conditions, the recording method, etc.
• Recommended Application Program
• A video file that has not been interleaved - Nero Burning / Easy CD Creator.. etc
supports only voice or video. • Option
- Multisession; No Multisession
• Check the DivX disc format as this is not an - CD close or Finalized CD
error. • In order to increase Disc Playability, add a dummy
file (over 100MB) together with the update file in
• Normal operation is only possible when the CD-R, not CD-RW. (The Dummy File can be used
screen size is 720X480 pixels or less. any kind of file except jpg, mp3, wma file. Zip file
• A maximum of 65 characters for the caption format is recommended).
title of a DivX disc is supported.
• Unsupported caption content will be Update procedure
displayed using asterisks (*). 1 Insert the update CD-R disc with the software
DivX can be divided into Video and Audio. update. It takes about 30 seconds to load the
update disc.
Supported CODEC formats DivX3, DivX4, DivX5 (GMC 1WP)

Supported file formats *.avi, *.mpeg 2 READING appears at the left upper side of
the screen.
Supported audio formats AC3, MP3, WMA

Supported caption formats * .SMI, * .SRT, * .SUB READING

Loading

38 - English

More user manuals on ManualsBase.com


XEU ENG 5 27/02/2006 13:37 Page 39

3 ERASE and WRITE appears in turn at the Special Playback Features


same location for about 40 sec during
During DVD/VCD/CD playback you can select
firmware update.
from the following special playback options.
To resume normal playback, press the Šll but-
ERASE
RETR 00 ton.

Still
Press the Šll button during playback.
• The picture will still and the audio will mute.
• To resume playback, press the Šll button.
• If the player is left in still mode for 5 minutes, it
will stop automatically.
4 It will be displayed DONE if the update is Note
completed successfully.
• Frame Advance operates only in the forward direc-
tion.
DONE
RETR 00
Frame Advance (Step)
While in playback mode, press the F.ADV/STEP
button on the remote control to advance one
frame at a time.
• Audio is muted during frame advance mode.
• Press the Šll button to resume normal play-
back.
5 After update is completed, you have to power
off the unit and eject the update disc by using Skip Forward/Back
the OPEN/CLOSE button once the unit turns While a CD or DVD disc is in play mode, press
on. the l¥¥ or ŠŠl button to jump forward and
backward through disc chapters/tracks.
6 Firmware update ir ended. Turn on your play- • Skip Forward (ŠŠl) will jump to the next
er and enjoy a DivX movie. chapter/track.
• Skip Back (l¥¥) will jump to the beginning of
the current chapter/track.
Code Ver : XXXXXXXXX • Press the l¥¥ button again to jump to the
Servo Ver : XXXXXXXXX
beginning of the previous chapter/track.

Search Forward/Back
While a disc is in play mode, press the ¥¥ or
ŠŠ button to visually search forward/backward
• In order to check new version like the at 2X - 4X - 8X - 16X - 32X - 128X speed. Press
upper, press the INFO button after the Šll button to resume normal speed.
opening a tray. • VCD/CD : 2X - 4X - 8X - 16X - 32

Note Slow Motion


• The display can be changed depend on its
version and without any notice. During playback, press the Šll button to still the
image. Then press the ŠŠŠŠl button to play
in slow motion at variable speeds.
• Each press increases the slow motion speed
playback to 1/8, 1/4 or 1/2 normal speed.
• Audio is muted during slow motion playback.

English - 39

More user manuals on ManualsBase.com


XEU ENG 5 27/02/2006 13:37 Page 40

Stop/Resume Using the Display Function


• Press the ■ button once to stop playback. To view the current Title, Chapter/Track, and
To resume the DVD/VCD/CD from the point counter position, press the INFO button during
where the disc stopped, press the Šll button. DVD playback. The display screen can also be
• Press the ■ button twice to completely stop used to quickly choose a title, chapter/track, or
playback. The next time you press the Šll playing time.
button, the disc will start over from the begin-
ning. 1 View the Display
During DVD/VCD/CD playback, press the
INFO button.
Note
• To make the screen disappear, press the
• Slow motion operates only in the forward direction.
Slow motion is not available for CD. INFO button again.
DVD

ENG 5.1CH

ENG

Off
MOVE OK

VCD CD

Off Off

MOVE OK MOVE OK

2 Press the ›or ‚ button to select the desired


item.

3 Press the ¥or Š button to make the desired


setup, then press the OK button.
• You may use the number buttons of the
remote control to directly access a title,
chapter or to start the playback from the
desired time.

4 To make the screen disappear, press the


INFO button again.

40 - English

More user manuals on ManualsBase.com


XEU ENG 5 27/02/2006 13:37 Page 41

To access the desired title when


Adjusting the Aspect Ratio (EZ View)
there is more than one in the disc. This function may be different depending on the
For example, if there is more than type of disc.
one movie on a DVD, each movie
will be identified. A DVD may To play using aspect ratio (DVD)
contain several different titles.
For example, if a disc contains four
1 Press the EZ VIEW button.
• The screen size changes when the button is
different movies, each might be con-
pressed repeatedly.
sidered a title.
• The screen zoom mode operates differently
depending on the screen setting in the initial
Most of DVD discs are recorded in
DVD menu.
chapters so that you can quickly find
• To ensure correct operation of the EZ VIEW
a specific passage.
button, you should set the correct aspect
Each Title on a DVD is usually divid-
ratio in the initial setup.
ed into chapters (similar to tracks on
an audio CD).
If you are using a 16:9 TV
Allows playback of the film from a For 16:9 aspect ratio discs
desired time. - Wide Screen
Displays the content of the DVD title in
16:9 aspect ratio.
Refers to the language of the film - Screen Fit
soundtrack. In the example, the The top and bottom portions of the screen
soundtrack is played in English are cut off. When playing a 2.35:1 aspect
5.1CH.A DVD disc can have up to ratio disc, the black bars at the top and
eight different soundtracks. bottom of the screen will disappear. The
picture will look vertically stretched.
Refers to the subtitle languages (Depending on a type of disc, the black
available in the disc. bars may not disappear completely.)
You will be able to choose the subti- - Zoom Fit
tles language or, if you prefer, turn The top, bottom, left and right of the
them off from the screen. screen are cut off and the central portion
A DVD disc can have up to 32 of the screen is enlarged.
different subtitles.
For 4:3 aspect ratio discs
A surround sound effect is generat-
ed using only two front speakers. - Normal Screen
Displays the content of the DVD title in
16:9 aspect ratio. The picture will look
Note horizontally stretched.
• When in VCD 2.0 is in Menu Off mode only, this
- Screen Fit
function works. You can choose Menu On or Menu The top and bottom portions of the screen
Off by using the DISC MENU button. are cut off and the full screen appears.
The picture will look vertically stretched.
- Zoom Fit
The top, bottom, left and right portions
of the screen are cut off and the central
portion of the screen is enlarged.

English - 41

More user manuals on ManualsBase.com


XEU ENG 5 27/02/2006 13:37 Page 42

If you are using a 4:3 TV Selecting the Subtitle Language


For 16:9 aspect ratio discs Some DVDs provide subtitles in one or more
- 4:3 Letter Box languages. You can use the SUBTITLE button
Displays the content of the DVD title in to quickly view and change settings.
16:9 aspect ratio. The black bars will
appear at the top and bottom of the 1 During playback, press the SUBTITLE button.
screen.
- 4:3 Pan Scan ENG
ENG Off
On

The left and right portions of the screen


are cut off an the central portion of the
16:9 screen is displayed. 2 Press the ¥ or Š button to select the desired
- Screen Fit subtitle language.
The top and bottom portions of the screen
are cut off and a full screen appears. 3 Press the › or ‚ button to select On.
The picture will look vertically stretched. • To make the menu bar disappear, press the
- Zoom Fit SUBTITLE button again.
The top, bottom, left and right portions of
the screen are cut off and the central ENG
ENG Off
On

portion of the screen is enlarged.

For 4:3 aspect ratio discs


- Normal Screen Note
Displays the content of the DVD title in 4:3 • The subtitle languages are represented by
aspect ratio. abbreviations.
- Screen Fit • This function depends on what languages are
The top and bottom portions of the screen encoded on the disc and may not work with all
DVDs.
are cut off and the full screen appears.
• A DVD disc can contain up to 32 subtitle languages.
The picture will look vertically stretched. • How to have the same subtitle language come up
- Zoom Fit whenever you play a DVD; Refer to “Using the
The top, bottom, left and right portions of Subtitle Language” on page 34.
the screen are cut off and the central
portion of the screen is enlarged.

42 - English

More user manuals on ManualsBase.com


XEU ENG 6 27/02/2006 13:38 Page 43

Selecting the Audio Language Zoom


Multiple language/audio setup options, such as
Dolby Digital 5.1, Dolby Pro Logic or LPCM 2
1 During playback, press the MENU button.
Press the › or ‚ button to select FUNC,
Channel audio are available on some DVDs.
then press the OK or Š button.
You can use the AUDIO button to quickly view
The Function menu is displayed.
and select the options available on a disc.
Function
1 During playback, press the AUDIO button. SETUP DVD Function Š
VCR Function Š
DVD DVD

VCR

PROG

FUNC

VCD, CD OK RETURN MENU

Stereo

2 Press the Š button, then press the › or ‚


button to select ZOOM.
• Press the ¥ or Š button to select stereo, DVD Function
Left or Right. Title Menu
SETUP
Disc Menu

2 Press the ¥ or Š button to select the desired DVD Info


Zoom
language or audio setup on the DVD. VCR Bookmark
Repeat
• Languages are represented by abbrevia- PROG EZ View
tions, e.g. ENG for English. FUNC

OK RETURN MENU

Note
• This function depends on what languages are 3 Press the OK or Š button.
encoded on the disc and may not work with all Press the › / ‚ or ¥ / Š button to select
DVDs.
the part of the screen you want to zoom in on,
• A DVD disc can contain up to 32 subtitle then press the OK button
languages.
• How to have the same audio language come up
whenever you play a DVD; Refer to “Using the
Audio Language” on page 33.

Changing the Camera Angle


Some DVD Movies provide you with various
camera angle views on the same scene if disc
contains multiple angles.
• Press the OK button to Zoom in
1 Press the ANGLE button. 2X/4X/2X/Normal in order.
• You can also select Zoom function directly
2 Press the ¥ or Š button to select a camera using ZOOM button on the remote control.
angle you may wish to see.

English - 43

More user manuals on ManualsBase.com


XEU ENG 6 27/02/2006 13:38 Page 44

Marks Repeat Chapter/Title


Up to three Bookmarks can be inserted for a You can repeat a single chapter or a complete
given DVD/VCD, allowing you to quickly jump to title.
your favorite scene or song.
1 Press the REPEAT button while in playback
1 During playback, press the MARK button. mode to open the repeat menu.
The current repeat mode is displayed.
2 Press the ¥ or Š button to select
Chapter/Title. Press the OK button to repeat
the current chapter/Title.
2 Press the ¥ or Š button to select one of the DVD

three mark placeholders (- - -). Off Chapter Title


Off Chapter Title A - B

Keep on playing the DVD up to the scene you


want to mark, then press the OK button. The
placeholder (-) is changed to a number (1, 2 VCD, CD
or 3).
Off
Off Chapter Disc
Track Title A - B
1
1 — — CLEAR
CLEAR

• The menu will display Track in place of


• You may continue to set up to three marks. Chapter if you are playing a VCD/CD.
Press the MARK button again to exit the
mark menu.
Cancel Chapter/Title
Recalling a Maked Scene 1 Press the REPEAT button to open the repeat
1 During playback, press the MARK button. menu.

2 Press the ¥ or Š button to selected Off,


2 Press the ¥ or Š button to select the mark then press the OK button.
you want to recall. DVD

3 Press the Šll button to play the mark. Off Chapter Title

VCD, CD
Clearing Mark
Track Disc
1 During playback, press the MARK button. Off

2 Press the ¥ or Š button to select the mark


you want to delete. • It is available to press the CLEAR button in
order to stop repeat play.
3 Press the CLEAR button to delete the mark.
• Press the MARK button again to exit the
mark menu.

Note
• Up to three scenes may be marked at a timer.
• When VCD 2.0 is in Menu Off mode only,
this function works.
• Depending on the disc, the mark function may not
work.

44 - English

More user manuals on ManualsBase.com


XEU ENG 6 27/02/2006 13:38 Page 45

A to B Repeat Cancel A-B Repeat


A to B Repeat feature enables you to repeat the 1 Press the REPEAT button to open the repeat
designated section on a DVD or VCD/CD. To menu.
activate, mark where to start (A) and where to
end (B) of the section you want to watch. 2 Press the ¥ or Š button to selected Off, then
press the OK button.
1 Press the REPEAT button while in playback DVD
mode, then press the ¥ or Š button to select
A-. Off Chapter Title

DVD

Off Chapter Title


VCD, CD

Off Track Disc

VCD, CD

Off Track Disc


• It is available to press the CLEAR button in
order to stop repeat play.

2 Press the OK button at the beginning of the Note


segment you want to repeat (Point A). • When in VCD 2.0 mode (MENU ON mode),
The B is selected. this function does not work.
DVD • Use the DISC MENU button in the VCD 2.0 mode
to select MENU ON or OFF.
Off Chapter Title

VCD, CD

Off Track Disc

3 Press the OK button again at the end of the


segment you want to repeat (Point B).
The segment will begin repeating in a
continuous loop.

English - 45

More user manuals on ManualsBase.com


XEU ENG 6 27/02/2006 13:38 Page 46

MP3/WMA Play CD-R MP3/WMA discs


If you insert an MP3/WMA Disc into When playing CD-R/MP3 or WMA discs,
the DVD-VCR, you can see the folder directory. please follow all the recommendations for
CD-R above, plus the comments below:
MP3/WMA Play Function Your MP3 or WMA files should be ISO
9660 or JOLIET format.
1 Press the › or ‚ button to select the desired ISO 9660 format and Joliet MP3 or WMA
music folder, then press the OK button. files are compatible with Microsoft's DOS
and Windows, and with Apple's Mac. These
Total : 3/4
two formats are the most widely used.
ROOT ROOT When naming your MP3 or WMA files do
AVI not exceed 8 characters, and place
JPEG ".mp3, .wma" as the file extension.
MP3
WMA
General name format of: Title.mp3. or
Title.wma. When composing your title,
make sure that you use 8 characters or
less, have no spaces in the name, and
avoid the use of special characters
including: (.,/,\,=,+).
• Up to 7 music folders can be displayed at a Use a decompression transfer rate of at
least 128Kbps when recording MP3 files.
time. If you have more than 8 folders on a Sound quality with MP3 files basically
disc, press the ‚button to display them. depends on the rate of compression
/decompression you choose. Getting audio
2 Press the › or ‚ button again to select a CD quality sound requires an analog/digital
sampling rate, that is conversion to MP3
music file. Press the OK button to begin play- format, of at least 128Kbps and up to
back of a music file. 160Kbps. However, choosing higher rates,
like 192Kbps or more, only rarely give
Total : 1/3
better sound quality. Conversely, files with
ROOT .. decompression rates below 128Kbps will
AVI A
MP3
not be played properly.
JPEG MP3
B
MP3 MP3 C Use a decompression transfer rate of at
WMA least 64Kbps when recording WMA files.
Sound quality with WMA files basically
depends on the rate of compression
/decompression you choose. Getting audio
CD quality sound requires an analog/digital
sampling rate, that is conversion to WMA
format, of at least 64Kbps and up to
Repeat 192Kbps. Conversely, files with decompres-
sion rates below 64Kbps or over 192Kbps
1 Press the REPEAT button in play mode to will not be played properly.
hear only music continuously and press it Do not try recording copyright protected
once again to release. MP3 files.
Certain "securized" files are encrypted and
Total : 1/3
code protected to prevent illegal copying.
These files are of the following types:
ROOT ..
AVI MP3
A
Windows MediaTM (registered trade mark
JPEG MP3
B of Microsoft Inc) and SDMITM (Registered
MP3 MP3 C trade mark of The SDMI Foundation). You
WMA cannot copy such files.
Important :
The above recommendations cannot be
Repeat file taken as a guarantee that the DVD-VCR
will play MP3 recordings, or as an assur-
ance of sound quality. You should note that
certain technologies and methods for MP3
file recording on CD-Rs prevent optimal
playback of these files on your DVD
player (degraded sound quality and in some
cases, inability of the player to read the
files).

46 - English

More user manuals on ManualsBase.com


XEU ENG 6 27/02/2006 13:38 Page 47

Program & Random Play/


PROGRAM RANDOM
(CD/MP3/WMA)
You can listen to songs randomly or in the
desired sequence.

Program Play
OK RETURN
1 Press the MODE button in the stop mode.
Press the ¥ or Š button to select PROGRAM.
Press the OK button.
ROOT ..
AVI MP3
A
PROGRAM RANDOM JPEG MP3
B
MP3 MP3 C
WMA

OK RETURN
• Depending on the disc, the Program and
Random Play functions may not work.
• To resume normal play, press the CLEAR
2 Press the ›/‚,¥/Š buttons to select the first button.
track to add to the program. Press the OK
button. The selection numbers are displayed in
the Program Order box.
Picture CD Playback
PROGRAM 01
If you insert a Picture (JPEG) CD Disc into the
DVD-VCR, you can see the folder directory.
MP3 Program Order
01 02 03 04 - - - - - - - -
05
09
06
10
07
11
08
12
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1 Press the › or ‚ button to select the picture
13 14 15 16 - - - - - - - - you want to view, then press the OK button.
- - - - - - - -
The selected picture is displayed.
RETURN CLEAR
Total : 1/215
ROOT ROOT
JPEG JPEG01

3 Press the Šll button. JPEG

JPEG
JPEG02
JPEG03
The disc will be played in programmed order. JPEG JPEG04
JPEG JPEG05
JPEG JPEG06

Cancel Program play JPEG JPEG07

During playback, press the CLEAR button.

2 Press the l¥¥ or ŠŠl button to display the


Random Play previous or next picture.
1 Press the MODE button in the stop mode. Photo : 1/215
OK RETURN

2 Press the ¥ or Š button to select RANDOM.


Press the OK button.
The disc will be played in random order.

English - 47

More user manuals on ManualsBase.com


XEU ENG 6 27/02/2006 13:38 Page 48

Note Slide show


• If no buttons on the remote control are pressed for
10 seconds, the menu bar will disappear.
Press the ¥ or Šbutton to select .
Press the DISC MENU button on the remote Press the OK button. The 3 icons are displayed
control to display the menu bar. for time interval.

Photo : 1/215

Album Mode OK RETURN

Press the ¥ or Š button to select .


Press the OK button.
The album mode is displayed.
Album Photo : 1/215

Timer : OK RETURN

• Press the ›/‚,¥/Š buttons to select the


required picture, then press the OK button.
The selected picture is displayed.
• Press the l¥¥ or ŠŠl button to display the
previous or next 6 pictures.
Press the ¥ or Š button to select one of these.
Rotation Press the OK button.
Press the ¥ or Š button to select . The pictures change automatically with
Each time the OK button is pressed, the picture about an 6 second interval.
rotates 90 degrees clockwise. The pictures change automatically with
about an 12 second interval.
Photo : 1/215
OK RETURN
The pictures change automatically with
about an 18 second interval.
• Depending on the file size, each interval
between images may take longer or shorter
than the manual suggests.
CD-R JPEG Discs
• Only files with the “.jpg” and “.JPG” extensions
can be played.
• If the disc is not closed, it will take longer to
Zoom start playing and not all of the recorded files
Press the ¥ or Š button to select . may be played.
Each time the OK button is pressed, the picture • Only CD-R discs with JPEG files in ISO 9660
is enlarged up to 4X. or Joliet format can be played.
(Normal ➝ 2X ➝ 4X ➝ Normal) • The name of the JPEG file may not be longer
than 8 characters and should contain no blank
Photo : 1/215 spaces or special characters (. / = +).
OK RETURN • Only a consecutively written multisession disc
can be played. If there is a blank segment in
the multisession disc, the disc can be played
only up to the blank segment.
• When playing a Kodak Picture CD, only the
JPEG files in the pictures folder can be
played.
• Picture discs other than Kodak Picture CD
may take longer to start playing or may not
play at all.
48 - English

More user manuals on ManualsBase.com


XEU ENG 6 27/02/2006 13:38 Page 49

DivX/MPEG4 Playback DivX/MPEG4 Special Playback


1 When the disc is inserted, the file structure of Features
the disc will be shown. Depending on the file During DivX/MPEG4 playback you can select
format, a different icon will appear next to from the following special playback options.
each file. The and files will have been
highlighted. 1 Still
Use › or ‚ button to select the movie file, Press the Šll button on the remote control
and then press OK or Šll. during playback.
Result : When the 'Reading Index......' • The picture will still and the audio will mute.
message is displayed, wait for a • To resume playback, press the Šll button.
second or two. The movie will be • If the player is left in Still mode for 5
played back. minutes, it will stop automatically.

2 Frame Advance (Step)


DivX While in playback mode, press the
DivX
F.ADV/STEP button on the remote control to
DivX
advance one frame at a time.
• Audio is muted during Frame Advance mode.
• Press Šll to resume normal playback.

3 Slow Motion
If the "Cannot support" message is During playback, press the Šll button to Still
displayed, the selected file cannot the image. Then use the Search ŠŠ to play in
be played back. slow motion at variable speeds.
• Each press increases the slow motion
2 To navigate to a specific time while viewing speed playback to 1/8, 1/4 or 1/2 normal
the movie, press the INFO button. speed.
The file format of the current file ( or ) • Audio is muted during slow motion playback.
and time information will be displayed. • The Search function may not operate
depending on the condition of the disc.
DivX

4 Stop/Resume
1/1
• Press the ■ button once to stop playback. To
Off
resume the DivX/MPEG4 from the point
~
where the disc stopped, press the Šll but-
ton.

Note
• Frame advance and slow motion operate only in the
3 Use the number buttons on the remote control forward direction.
to enter the time to jump to that time in the
movie.

English - 49

More user manuals on ManualsBase.com


XEU ENG 6 27/02/2006 13:38 Page 50

5 Zoom
During play, press the MENU button on the
remote control. Then press the › or ‚ button
to select the FUNC , then press the OK or Š
button. The Function menu is displayed.

Function

SETUP DVD Function Š

VCR Function Š
DVD

VCR

PROG

FUNC

OK RETURN MENU

• Press the › or ‚ button to select DVD


Function. Press the OK or Š button.
• Press the › or ‚ button to select ZOOM,
then press the OK button.

DVD Function
Title Menu
SETUP
Disc Menu
DVD Info
Zoom
VCR Bookmark
Repeat
PROG EZ View
FUNC

OK RETURN MENU

• Press the ›/‚ or ¥/ Šbutton to select the


part of the screen you want to zoom in on,
then press the OK button.
The screen will be enlarged to twice the
normal size.

Auto Scaling : CIF(100kbps)~D1(784kbps)


resolution. If the file resolution
is times automatically. So you
can see the more larger screen.

50 - English

More user manuals on ManualsBase.com


XEU ENG 7 27/02/2006 13:40 Page 51

Technical Specifications

Rated voltage AC 220 - 240V, 50Hz


Power consumption 19Watts
Weight 3.9 Kg
General Size 430mm X 282mm X 82mm
Operating ambient temperature +5°C ~ +40°C
Installation conditions Operation position : Horizontal,
Relative humidity : Below 75%
Video input (Rear) Euro Scart socket : 1.0Vp-p (unbalanced)
Input Audio input (Rear) Euro Scart socket : -8dBm, 47Kohm unbalanced
Input (Front) RCA jack
RF Out UHF 21~ 69 (Initial CH60)
Audio (DVD, VCR) RCA jack, Euro Scart socket
Audio (DVD only) COAXIAL, RCA jack
Output
Video (DVD, VCR) RCA jack, Euro Scart socket
Video (DVD only) S-Video out, Component
RGB out : Euro Scart socket
Tape format VHS type video tape
Colour system PAL,NTSC4.43, NTSC playback on PAL TV
Tuning system I
VCR Video S/N Above 43dB (standard recording)
Resolution Above 240 lines (standard recording)
Audio S/N Above 68dB (Hi-Fi), 39dB (Mono)
Audio frequency characteristics 20Hz - 20KHz (Hi-Fi)
Disc DVD, VCD, CD.
DVD Audio S/N 100dB

Audio dynamic range 95dB

English - 51

More user manuals on ManualsBase.com


XEU ENG 7 27/02/2006 13:40 Page 52

Troubleshooting Guide (VCR)

Before contacting the Samsung after-sales service, perform the following simple checks.
If you are unable to solve the problem after reading the below instructions, note:
• The model and serial number on the rear of your DVD-VCR.
• The warranty information.
• A clear description of the problem.
Then contact your nearest SAMSUNG after-sales service.

Problem Solution

No power ◆ Check that the power plug is connected to a wall outlet.


◆ Have you pressed the STANDBY/ON button?

You cannot insert a video cassette ◆ A video cassette can only be inserted with the window
side up and the safety tab facing you.

The television programme ◆ Check the DVD-VCR aerial connections.


was not recorded ◆ Is the DVD-VCR tuner properly set?
◆ Check if the safety tab is intact on the cassette.

Timer recording was unsuccessful ◆ Was the STANDBY/ON button pressed to activate the timer?
◆ Re-check the recording start/stop time settings.
◆ If there was a power failure or interruption during timer
recording, the recording will have been cancelled.

You cannot see normal broadcasts ◆ Check the tuner or external setting. It should be on tuner.
◆ Check the TV or VCR aerial connections.

Noise bars or streaks on playback ◆ Press the TRK (›


› or ‚ ) buttons to minimize this effect.

When the ŠII button is pressed ◆ A still picture may have “noise bars”, depending on the
during playback, the still picture condition of the tape. Press the TRK (›› or ‚) buttons
has severe “noise bars” streaks during slow motion to minimize this effect.

Video Head Cleaning ◆ If poor pictures appear on a variety of cassettes, the video
heads may need cleaning. This is not a common problem
and unless it appears, the heads should not be cleaned.
When cleaning the video heads, read all instructions
provided with the head cleaning cassette. Incorrect head
cleaning can permanently damage the video heads

If when tuning in your TV to the 1. Remove the aerial input plug the socket marked (Aerial symbol)
DVD-VCR, TV does not find the Screen on the rear of the DVD-VCR.
or the pattern when found suffers from 2. Carry out the instructions “Tuning Your Television for the DVD-
interference, it may be due to the DVD-VCR VCR” (See page 15).
output channel clashing with the normal 3. Carry out the instructions “Setting the VCR output Channel”
TV transmissions in your area. (See page 20), move the channel number several channels
To prevent this you will need to change the down from the original setting. (Example: from 60 to 69).
DVD-VCR output channel in the following way. 4. Replace the aerial plug into the socket marked (Aerial symbol)
on the rear of the DVD-VCR.
5. Re-tune your TV to the DVD-VCR again by following instructions
“Tuning Your Television for the DVD-VCR” (See page 15).
6. If the problem still exists repeat steps 1 to 5 moving several
more channels away from the original setting.

52 - English

More user manuals on ManualsBase.com


XEU ENG 7 27/02/2006 13:40 Page 53

Troubleshooting Guide (DVD)

Problem Solution Page

◆ Ensure that the disc is installed with the label side facing up.
Disc does not play. ◆ Check the region number of the DVD. P3
◆ This DVD-VCR cannot play CD-ROMs, DVD-ROMs, etc. Insert a DVD, or a CD.

◆ 5.1 channel sound is reproduced only when the following conditions are met.:
1) The DVD-VCR is connected with the proper amplifier.
5.1 channel sound is not
2) The disc is recorded with 5.1 channel sound. P12
being reproduced.
◆ Check whether the disc being played has the “5.1 ch” mark on the outside. P34~35
◆ Check if your audio system is connected and working properly.

◆ The features or action cannot be completed at this time because:


1. The DVD’s software restricts it.
The icon appears on 2. The DVD’s software doesn’t support the feature (e.g., angles).
P33~48
screen. 3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is out of
range.

Playback mode differs


◆ Some of the functions selected in the Setup menu may not work
from the Setup menu P33~37
properly if the disc is not encoded with the corresponding function.
selection.

The screen ratio cannot


◆ The screen ratio is fixed on your DVDs. P35
be changed.

◆ Make sure you have selected the correct Digital Output in the Audio Options
No audio. P34
Menu.

◆ Press STANDBY/ON with no disc in the unit. Press the ŠŠ button on the
front panel for five seconds. Power off and on the DVD-VCR by pressing
Forgot password. STANDBY/ON button. The parental mode is now unlocked as indicated on the P36~37
display. You can now set your rating level and change your password to a new
number.

◆ Check the contents of the instruction book that contains the explanations
If you experience other regarding the current problem and follow the procedure once again.
problems. ◆ If the problem still cannot be solved, please contact your nearest authorized
service center.

English - 53

More user manuals on ManualsBase.com


XEU ENG 7 27/02/2006 13:40 Page 54

UNITED KINGDOM REPUBLIC OF


IRELAND

This Samsung product is warranted for the period of 4. This product is not considered to be defective in
twelve (12) months from the original date of materials nor workmanship by reason that it
purchase, against defective materials and requires adaptation in order to conform to national
workmanship. In the event that warranty service is or local technical or safety standards in force in
required, you should return the product to the retailer any Country other than the one for which the
from whom it was purchased. product was originally designed and manufac-
However, Samsung Authorised Dealers and tured. This warranty will not cover, and no re-
Authorised Service Centres in other EC Countries imbursement will be made for such adaptation nor
will comply with the warranty on the terms issued to any damage which may result.
purchasers in the country concerned. 5. This warranty covers none of the following:
In case of difficulty, details of our Authorised Service a) Periodic check ups, maintenance and repair or
Centres are available from: replacement of parts due to normal wear and
tear.
Samsung Electronics U.K. Ltd. b) Cost relating to transport, removal or installation
Unit C, Stafford Park 12 of the product.
Telford, Shropshire c) Misuse, including the faiure to use this product
TF3 3BJ for its normal purposes or incorrect installation.
The United Kingdom d) Damage caused by Lightning, Water, Fire, Acts
Tel: 0870) 242 0303, of God, War, Public Disturbances, incorrect
Fax: 01952) 297617 mains voltage, improper ventilation or any other
cause beyond the control of Samsung.
■ WARRANTY CONDITIONS
6. This warranty is valid for any person who legally
acquired possession of the product during the
1. The warranty is only valid if, when warranty ser-
warranty period.
vice is required, the warranty card is fully and prop-
erly completed and is presented with the original 7. The consumers statutory rights in any applicable
invoice or sales slip or confirmation, and the serial national legislation whether against the retailer
number on the product has not been defaced. arising from the purchase contract or otherwise
are not affected by this warranty. Unless there is
2. Samsung’s obligations are limited to the repair or,
national legislation to the contrary, the rights under
at its discretion, replacement of the product or the
this warranty are the consumers sole rights and
defective part.
Samsung, its subsidiaries and distributors shall not
3. Warranty repairs must be carried out by Authorised be liable for indirect or consequential loss or any
Samsung Dealers or Authorised Service Centres. damage to records, compact discs, videos or
No re-imbursement will be made for repairs carried audio taper or any other related equipment or
out by non Samsung Dealers and, any such repair material.
work and damage to the products caused by such
repair work will not be covered by this warranty. SAMSUNG ELECTRONICS (U.K.) LTD.

54 - English

More user manuals on ManualsBase.com


XEU ENG 7 27/02/2006 13:40 Page 55

Contact SAMSUNG WORLD WIDE


If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care centre.

Region Country Customer Care Center ☎ Web Site


CANADA 1-800-SAMSUNG (7267864) www.samsung.com/ca
North America MEXICO 01-800-SAMSUNG (7267864) www.samsung.com/mx
U.S.A 1-800-SAMSUNG (7267864) www.samsung.com
ARGENTINE 0800-333-3733 www.samsung.com/ar
BRAZIL 0800-124-421 www.samsung.com/br
CHILE 800-726-7864(SAMSUNG) www.samsung.com/cl
COSTA RICA 0-800-507-7267 www.samsung.com/latin
ECUADOR 1-800-10-7267 www.samsung.com/latin
EL SALVADOR 800-6225 www.samsung.com/latin
GUATEMALA 1-800-299-0013 www.samsung.com/latin
Latin America
JAMAICA 1-800-234-7267 www.samsung.com/latin
PANAMA 800-7267 www.samsung.com/latin
PUERTO RICO 1-800-682-3180 www.samsung.com/latin
REP. DOMINICA 1-800-751-2676 www.samsung.com/latin
TRINIDAD & TOBAGO 1-800-7267-864 www.samsung.com/latin
VENEZUELA 1-800-100-5303 www.samsung.com/latin
BELGIUM 02 201 2418 www.samsung.com/be
CZECH REPUBLIC 844 000 844 www.samsung.com/cz
DENMARK 38 322 887 www.samsung.com/dk
FINLAND 09 693 79 554 www.samsung.com/fi
FRANCE 08 25 08 65 65 (0,15 /Min) www.samsung.com/fr
GERMANY 01805 - 121213 ( 0,12/Min) www.samsung.de
HUNGARY 06 40 985 985 www.samsung.com/hu
ITALIA 199 153 153 www.samsung.com/it
Europe LUXEMBURG 02 261 03 710 www.samsung.lu
NETHERLANDS 0900 20 200 88 ( 0.10/Min) www.samsung.com/nl
NORWAY 231 627 22 www.samsung.com/no
POLAND 0 801 801 881 www.samsung.com/pl
PORTUGAL 80 8 200 128 www.samsung.com/pt
SLOVAKIA 0850 123 989 www.samsung.com/sk
SPAIN 902 10 11 30 www.samsung.com/es
SWEDEN 08 585 367 87 www.samsung.com/se
U.K 0870 242 0303 www.samsung.com/uk
RUSSIA 8-800-200-0400 www.samsung.ru
CIS UKRAINE 8-800-502-0000 www.samsung.com/ur
AUSTRALIA 1300 362 603 www.samsung.com/au
CHINA 800-810-5858, 010- 6475 1880 www.samsung.com.cn
HONG KONG 2862 6001 www.samsung.com/hk
3030 8282
INDIA www.samsung.com/in
1600 1100 11
INDONESIA 0800-112-8888 www.samsung.com/id
Asia Pacific JAPAN 0120-327-527 www.samsung.com/jp
MALAYSIA 1800-88-9999 www.samsung.com/my
PHILIPPINES 1800-10-SAMSUNG (7267864) www.samsung.com/ph
SINGAPORE 1800-SAMSUNG (7267864) www.samsung.com/sg
1800-29-3232
THAILAND www.samsung.com/th
02-689-3232
TAIWAN 0800-329-999 www.samsung.com/tw
VIETNAM 1 800 588 889 www.samsung.com/vn
Middle East & Africa
SOUTH AFRICA 0860 7267864 (SAMSUNG) www.samsung.com/za
U.A.E 800SAMSUNG (7267864) www.samsung.com/mea

More user manuals on ManualsBase.com


XEU ENG 7 27/02/2006 13:40 Page 56

Contact SAMSUNG WORLD WIDE


If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.
☎ 0870 242 0303 / www.samsung.com/uk

Correct Disposal of This Product


(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed with other household
wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable
reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government
office, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This prod-
uct should not be mixed with other commercial wastes for disposal.

AK68-00954C

You might also like