Column Dimensions / MCV vertical flow

Mechanical data
Internal diameter 1'500 mm
Preliminary height between LZA (HH) level and TTL 2'132 mm
Column Height 2'832 mm
Calculated data
Base load Current load
Lambda (k-value) in column 0.058 m/s 0.058 m/s
Pressure drop over column inlet to outlet nozzle 42.92 mbar 42.92 mbar

Design loadings
Base Load for geometry calculation
Load_1 Vapor[V] Liquid 1 [L1] Liquid 2 [L2] L.Mixture[LM]
Mass flow rate kg/h 28'026 123'265 0 123'265
Mellachevron
Volume flow rate efficiency m³/h 3'148.989 189.347 0.000 189.347
Density Base kg/m³ Curren 8.900 Current
651.00 980.00 651.00
Viscosity 6.82 cP6.82 5 μm
0.0100 89.18
0.2299 89.18 0.5000
25 μm 0.2299
Estimated
Surface tension 25.13 mN/m 25.13 10 n/a
μm 97.65
9.57 97.65 55.00
30 μm 9.57
percentage 49.30 49.30 15 μm 100.00
L1/(L1+L2)
100.00 L2/(L1+L2)
40 μm LM/(V+LM)
efficiency at drop size
Volume fraction 72.46 vol% 72.46 20 -μm 100.00
100.00 100.00 0.00
50 μm 5.67
Molecular weight kg/kgmole 117.50
Operating temperature °C 242.00
Gas outlet
Operating pressure bar a 3.300
Outlet nozzle
Current Loadinside diameter 257 mm 8" NB
Load_1 Vapor[V]
Base loadLiquid 1 [L1] Liquid
Current
2 [L2] loadL.Mixture[LM]
Momentum
Mass flow rate kg/h 28'026
2'531 123'265Pa 0 2'531 123'265
Pa
Pressureflow
Volume droprate m³/h 3'148.989
5.57 189.347mbar 0.0005.57 189.347
mbar
Density kg/m³ 8.900 651.00 980.00 651.00
Viscosity
This information is not to be taken as warrantycP 0.0100
or representation 0.2299 0.5000 legal responsibility.
for which we assume 0.2299
Surface tension
It is offered solely for your consideration,mN/m
investigation n/aand verification.
9.57 55.00 9.57
L1/(L1+L2) L2/(L1+L2) LM/(V+LM)
Volume fraction vol% - 100.00 0.00 5.67
Molecular weight kg/kgmole 117.50
Operating temperature °C 242.00
Operating pressure bar a 3.300

Inlet device
Mechanical data
GIVSA Type l ID of Inlet nozzle 304 mm 10" NB
Calculated data
Based on inlet nozzle inside diameter 304 mm 10" NB
Base load Current load
Momentum actual of mixture 7'397 Pa 7'397 Pa
Momentum actual gas only 1'293 Pa 1'293 Pa
Pressure drop (incl. inlet nozzle) 36.99 mbar 36.99 mbar
Bulk liquid removal efficiency 99.10 % 99.10 %
Flow parameter 0.514 0.514
 Column Dimensions
Mellachevron design / MCV vertical flow
Mechanical data Base Current
Internal diameter
Mellachevorn type V30C 1'500 mm
Preliminary height
Mellachevron Thickness
between LZA (HH) level
200 and TTL mm MCV liqu. loading 2.174
2'132 2.174 mm m³/m²h
Column HeightShape
Mellachevron Circle Design lambda (K-val) 0.125
2'832 0.125 mm m/s
Calculated data
Diameter 1'000 mm Design velocity 1.065 1.065 m/s
BaseActual
load lambda (K-val) 0.131
Current load
0.131 m/s
Lambda (k-value) in column 0.058
Actual velocity
m/s 1.114
0.058 1.114 m/s m/s
Pressure drop over column inlet to outlet nozzle 42.92
Min. velocity mbar 0.533
42.92 0.533 mbarm/s
Perforated plates none NFA of perforated plate 100.00 - %
Hole size in perf. plate 12 - mm
Design
MCV loadings
net freee area (NFA) 0.785 m² Pressure Drop 0.36 0.36 mbar
Baseparam.
Flow Load for geometry calculation 0.005 0.005 In velocity range HIGH HIGH
Mellachevron
Volume flow rate efficiency
Density Base kg/m³
Curren 8.900 Current
651.00 980.00
Viscosity 6.82 cP6.82 5 μm
0.0100 89.18
0.2299 89.18 0.5000
25 μm 0.2299
Estimated
Surface tension 25.13 mN/m
25.13 10 n/a
μm 97.65
9.57 97.65 55.00
30 μm 9.57
percentage 49.30 49.30 15 μm 100.00
L1/(L1+L2)
100.00 L2/(L1+L2)
40 μm LM/(V+LM)
efficiency at drop size
Volume fraction 72.46 vol%
72.46 20 -μm 100.00
100.00 100.00 0.00
50 μm 5.67
Molecular weight kg/kgmole 117.50
Operating temperature °C 242.00
Gas outlet
Operating pressure bar a 3.300
Current
Outlet nozzle
Loadinside diameter 257 mm 8" NB
Load_1 Vapor[V]
Base load
Liquid 1 [L1] Liquid
Current
2 [L2] loadL.Mixture[LM]
Mass flow rate
Momentum kg/h 28'026
2'531 123'265Pa 0 2'531 123'265
Pa
Volume flow
Pressure drop
rate m³/h 3'148.989
5.57 189.347mbar 0.0005.57 189.347
mbar
 Vapour Phase

Mixture Phase

Liquid Phase