Underground Cable / Pipe Locator System: Features
Underground Cable / Pipe Locator System: Features
Underground Cable /
Pipe Locator System
Keep productivity high and operational costs low with the Amprobe
AT-3500. It’s the rugged, economical solution for locating underground
energized and de-energized wires, cables and pipes. Great for parking lot
and airport lighting applications, it precisely pinpoints buried services with
exceptionally fast sound and meter response. Take depth measurements
with the press of a button. The backlight multiple-segment bar-graph
digital display plus audible indicators show and tell readings. The AT-3500
employs the proven 33 kHz frequency for most locating applications. To
avoid lines at utility construction sites, it also offers the highly sensitive
power and radio modes.
Features
• Locates underground energized and
de-energized wires, cables and pipes
• Three testing modes for best
accuracy
– Passive Power (50 / 60 Hz)
– Passive Radio (RF)
– Active T-3500 signal generator
with induction mode or directly
connected to the cable with test
leads or optional clamp
• Active Mode Depth measurement up
to 16 ft (4.9 m)
• Semi-automatic gain control – fast
signal location and control
Floor Cap • 33 kHz active frequency – best
Control Panel (Removable)
with display
frequency for general locating
• Precise pinpointing of buried
services and exceptionally fast sound
Speaker with and meter response with backlight
Volume control Battery Compartment
multiple-segment bar-graph digital
display and audible indicators
Headphone jack
(3.5 mm headphone • Complete instrument, ready for use
not included)
with receiver, transmitter, connection
cable, ground stake and ground cable
AT-3500
Underground Cable /
Pipe Locator System
Amprobe® | info@amprobe.com | Fluke Corporation, Everett, WA 98203 | Tel: 877-AMPROBE (267-7623) ©2017 Amprobe® For detailed specifications and ordering go to amprobe.com 3520630 A
Specifications
Features AT-3500
Depth Measurement 10 ft (3.05 m)
Passive Tracing Frequencies 50 / 60 Hz
Transmitter frequency Single, non-adjustable
Range 1: radio 15 kHz to 23 kHz
R-3500 Frequency ranges Range 2: power network 50 Hz / 60 Hz; optionally 100 Hz (can be adjusted by Amprobe service personnel)
Range 3: transmitter 32.768 kHz
All Amprobe tools, including the Amprobe CM100, are rigorously tested for safety, accuracy, reliability, and ruggedness in our state-of-the-art test lab.
In addition, Amprobe products that measure electricity are listed by a 3rd party safety lab, either UL or CSA. This system assures that Amprobe products meet
or exceed safety regulations and will perform in a tough, professional environment for many years to come.
Amprobe® | info@amprobe.com | Fluke Corporation, Everett, WA 98203 | Tel: 877-AMPROBE (267-7623) ©2017 Amprobe® For detailed specifications and ordering go to amprobe.com 3520630 A