TBS-50

BATCH WASHER
Continuous batch washing system
 CONTINUOUS BATCH WASHER
KEY TO PRODUCTIVITY, EFFICIENCY AND RESULTS

TBS-50

The TBS-50 Batch Washer processes over 3,000 pounds of laundry per hour—offering high-volume laundries
a modular, adaptable laundry solution that integrates seamlessly with the SPR-50 Press and ST-100 Dryer. The
automated batch washer brings the ultimate in productivity, efficiency and ease of use to laundries. Thanks to a
convenient dual-drum modular design, the TBS-50 is less costly and simpler to install than comparable machines
on the market, uses less water and energy, runs quietly and delivers a quality wash for any fabric type. Available
in five- to 12-modules, the TBS-50 is an extremely flexible tunnel washer that can be configured according to the
needs of any high-volume laundry—today and tomorrow.

The Complete Laundry Solution

Girbau Industrial delivers the total laundry solution to high-volume laundries. With a proven line of batch tunnel
washers, presses, dryers, ironers and loading and unloading systems, Girbau Industrial serves the complete laundry
production and efficiency needs of virtually any application. Durable and reliable, Girbau Industrial laundry systems
are in place at hospitals, hotels, casinos, resorts and industrial laundries across the globe.

Flexible to Meet Any Laundry Need

The earmark of the TBS-50 is its infinite flexibility. Superior programmability along with its series of identical, highly
flexible wash modules, allows for configurability to meet very specific laundry needs. Girbau Industrial’s engineering
team can custom configure every tunnel system at the time of order, or months or years after installation, to meet future
facility needs. Steam inlets and chemical ports can also be added after installation as processing needs change.

1
MODULAR DESIGN WITH INNER & OUTER DRUM
The TBS-50 Batch Washer features a modular inner and outer drum system with separate baths for each module—providing
great efficiency and wash process flexibility. The inner-outer drum construction of every module allows for total control over
water temperature and levels, duration of the wash cycle, mechanical action, bath partitions, rapid draining, chemical injection,
dosing parameters and more. Moreover, each module is programmable to perform a complete bath exchange when necessary.
Unlike the TBS-50 Batch Washer, single-drum batch washers require more space and modules to properly wash laundry.
Single-drum washers also require preheating and do not allow for total control of chemicals, steam, baths and drainage.

Top Transfer Eliminates Mixing of Baths from Module to Module

The TBS-50 Batch Washer features a wide top-transfer opening at every module. This
assures laundry passes from one module to another without mixing baths. During transfers,
sensors monitor and confirm conditions are met for transferring the load without jams. Laundry
progresses through each of the washer’s identical 110-pound capacity modules, where it is
soaked, pre-washed, washed and rinsed according to each precisely programmed module.

Traceability and Disinfection

The TBS-50 is configurable to properly sanitize linens—critical for laundry processed for
hospitals, nursing homes and assisted-living facilities. Steam injectors and intermediate
filter tanks work to ensure particles from the rinse cycle aren’t reused during the wash
process. The washer’s independent modules and steam inlets totally permeate linens at the
temperatures and conditions required to properly disinfect laundry. Each module has the
option for a steam inlet, and the outer drums of each module ensure proper chemical dosing
at every stage of the wash process.

Requires Less Water and Energy

The TBS-50 Batch Washer reuses water at specific points during the wash process. The
freshest rinse water is used on the cleanest linen to ensure pristine wash results. Once the
linens are rinsed, the used rinse water is redirected to a holding tank and used a second
time to wash another load of soiled linens.

Reduced Maintenance & Installation Costs

Not only is it less expensive to install than other models on the market, the TBS-50 requires
less maintenance thanks to its unique design. The washer is transportable fully assembled
within a single standard container or trailer—lowering shipping costs. Because it’s pre-
assembled, installation is completed in considerably less time—saving money. Its dual-drum
design means it properly cleans using less space than single-drum models which require
more modules to accomplish the same process.
Thanks to straightforward engineering, the TBS-50 is a proven performer requiring less
maintenance—reducing downtime and production loss. The vortex-type pumps have no filters
and do not, as a result, require filter cleaning like most batch washers. Additionally, the washer’s
transmission features a centralized lubrication system, minimizing maintenance, and the motor
drive is externally located away from moist areas to eliminate the risk of breakdowns. 2
 SUPERIOR CONTROL & PROGRAMMABILITY
Every facet of the TBS-50’s automated system is programmed from a central control, which allows for 99 individual programs and detailed
adjustments of different operations of every component of the laundry processing system. This central control oversees the operation of
every laundry system component, including conveyors, batch washers, presses, transfer shuttles and dryers.
An Ethernet-type industrial network centralizes the information from all system components – conveyor, batch washer, press and dryer –
and details the information on a computer display for easy management and control.

Production Management in a Graphic Environment

The control’s graphic management system allows operators to select different
management options with a simple click of the mouse—providing quick and easy control
over every facet of the laundry system. The central control’s computer can be located
in a remote location away from equipment, such as in a manager’s office. That control
allows the manager to make changes to equipment formulas and save those changes to
apply at a later time.

Processing Reports/Data in Real Time

The control’s computer system allows users to run control reports detailing production,
summaries, temperature, dosing, pump flow, mechanical action/cycle, press pressure,
drying programs, customer screens descriptions, diagnostics, records of alarms and
more. All data is exportable in spreadsheet form using MS Excel.

Remote Technical Support from Girbau Industrial

It’s easier than ever to troubleshoot technical problems thanks to Girbau Industrial’s new remote support. Through an ADSL
connection with any machine of the washing system – batch washer, press, dryers or conveyors – Girbau Industrial can
troubleshoot problems and provide technical assistance. This service helps reduce downtime and lost productivity by getting your
equipment up and running more quickly.
3
Advanced Programmability of the Batch Washer
Individually, the Batch Washer is programmable by module for water temperature,
duration of the wash cycle, mechanical action, bath partitions, rapid draining, chemical
dosing, water levels, closing parameters and more. Offering detailed management over
the wash process, the control is easy to use and offers a clear graphic display showing
real-time data. It allows users to manage more than 999 client accounts and offers 99
washing programs.
• Control system display screen and printer available
• Control system electrical wiring is designed to fit the type of signal transmitted to
avoid interferences
• Central control manages operations of every component of the laundry system
(batch washers, presses, dryers and conveyors).
• Simple-to-use graphic display allows for efficient management with a click of a
mouse
The TBS-Batch Washer
• Connection with technical assistance Tactile Control
• Maintenance program instructions and logs inspection dates Clearly illustrated graphic icons make
• Dosing of detergents and chemicals it easy to use the TBS-Batch Washer
Tactile Control. With a click of the mouse,
• Management of up to 99 washing programs and 999 client accounts users can select and control every
• Programmable by module for water temperature, water levels, chemical dosing, variable of the wash process by module.
mechanical action, closing parameters, duration of wash cycle, bath partitions Real time data regarding the wash
and more process can be viewed from the
main screen of the control, and from
easily accessed sub-screens. View
program, customer, loads, water
temperatures, chemical injection,
cycle time and productions.

4
 ADVANCED ENGINEERING = MECHANICAL INNOVATION & SUPERIOR EFFICIENCY
Thanks to innovative engineering, the TBS-50 Batch Washer cuts water
and energy usage, and bolsters productivity using short wash cycles.
Reliable, durable and easy to use, the Batch Washer operates silently,
while offering an unmatched dilution factor and cleaning results.

Transfer of the load from

one module to the next is
seamless, thanks to the
wide diameter of the transfer
The motor drive is located externally, away opening. With each transfer,
from moist areas to prevent damage. The the washer carries out an
transmission drive crown and sprocket auto-verification to avoid linen
are internally lubricated with no neeed for tie-ups.
ongoing maintenance.

An independent computer displays the control

in real time—showing every laundry batch in
process, the temperature of every bath and
5 each chemical dosing.
 Durable Construction
The independent Durability of construction characterizes the TBS-Batch Washer.
outer drum at every
module allows complete
The chassis is constructed with steel profiles finished in durable
configurability of the epoxy paint. Additionally, any materials that come in contact
process and total control with laundry consist of AISI-304 stainless steel. No wonder the
over water temperature washer is backed by a limited 2 year manufacturer’s warranty.
and chemical injection.

The mono-block system—

the set of inner and outer
drums—delivers unmatched
installation versatility and
control over the wash process
by module.

• Available in five- to 12-module configurations; each module has a capacity of 110 pounds.
• Constructed of inner and outer drums to form an integrated mono-block system.
• An inverter-controlled motor drive allows for variable rotation speeds.
• Washer drums are joined without welds, using a patented system.
• Baths are separated by two long-lasting EPDM gaskets.
• Easy, less costly installation–the machines are fully assembled and transported via standard container or trailer.
•B atch washer drums are constructed of perforated stainless steel, seven wash beaters, and top transfer to obtain unequaled
mechanical action and an excellent dilution factor.
• Steam inlets are optional for proper disinfection of laundry.
•P rogrammable by module for water temperature and levels, duration of the wash cycle, mechanical action, bath partitions, rapid
draining, chemical injection, closing parameters and more.
•D esigned to operate with less negative impact on the environment, the press water and rinse water are reused, and
the washer itself is engineered to use less energy.
6
 TBS – MULTI BATCH WASHER

A PROFESSIONAL SOLUTION FOR MULTIPLE PURPOSES

Sand Removal
If this function is activated, module 1 Girbau Industrial has designed the TBS – MULTI Batch Washer to solve the large
is periodically emptied to facilitate the production needs of laundry. This example above is available for seven- to 10-module
removal of sand residue. batch washers.

Termostop
SOAK AND PRE-WASH
With this function activated, the transfer
of laundry is not permitted until the
The soak and pre-wash phase is carried out with water recovered from the subsequent
programmed temperature of the phases and flows in the direction of the current. A large part of the dirt from the laundry is
indicated module is obtained removed in this phase.
The temperature control in the recovery tank guarantees that the water temperature in this
phase does not surpass the temperature programmed.

TBS - MULTI/10 WASH

Production Example
The water, coming from the recovery tank, flows in the direction of the current, assuring the
maximum washing efficiency and minimizing the contamination between adjoining modules.
Process time: 20 minutes Each module in this phase has a steam injectors system thermostatically controlled to
Loads per hour: 30 guarantee the programmed temperature.
Production: 3307 lbs/h The great density of perforation of the drum and the good mechanical action of the wash
beaters assure an excellent washing process.
Resources used per
pound of laundry RINSE
The water recovered from the press and a small quantity of water from the water supply
Water*: 1.19 gal.
flow counter current to guarantee an efficient rinse and an optimum use of resources.
Steam*: 0.66 lbs.
Electrcitiy: 0.014 kW/h NEUTRALIZER
Detergent: Depending on wash program
The neutralizing phase is done in the last module, with water coming from the
* Depending on the actual variables supply network.
of the wash process

7
EXAMPLES OF WASHING SYSTEMS

Example of Standard Washing

The installation is ideal for industrial washing of large quantities of laundry.

Equipment:
• 1 ICP-4 Loading conveyor
• 1 TBS-10 Batch Washer
• 1 SPR-50-AD Press
• 1 CEED-4 Distribution conveyor
• 4 ST-100 Tumble Dryers

Space:
• The mechanical area occupies a space of 1,838 sq. ft.
• Minimum height required 12.5 ft.

Required staff:
• 2 operators in the loading area
• 1 operator in the unloading and control area

With this installation a wash process is done in 20 minutes. It has a minimum

capacity to dry 4 towel cakes per hour in 220 pound loads.
The total laundry production is 3,307 lbs/h*, of which approximately 50 percent
being towelling completely dry, and the remaining 50 percent flat laundry prepared
for ironing.

* Depending on the actual variables of the wash process.

Example of Intensive Washing

The installation is ideal for washing laundry requiring intensive washing.

Equipment:
• 1 ICP-4 Loading conveyor
• 1 TBS-12 Batch Washer
• 1 SPR-50-L Press
• 1 CEED-2 Distribution conveyor
• 3 ST-100 Tumble Dryers

Space:
• The mechanical area occupies a space of 1,943 sq. ft.
• Minimum height required 12.5 ft.

Required staff:
• 2 operators in the loading area
• 1 operator in the unloading and control area

With this installation a wash process is done in 30 minutes. It has a minimum

capacity to dry 4 towel cakes per hour in 220 pound loads. The total laundry
production for hospital laundry is 2,646 lbs/h*, of which 33 percent being
toweling completely dry.

* Depending on the actual variables of the wash process.

8
 GIRBAU INDUSTRIAL’S FAMILY OF PRODUCTS
A Complete Laundry System Solution

CONTINUOUS WASHING SYSTEM

loading Conveyors (weight controlled)

Girbau Industrial loading conveyers load laundry batches by precise
load volume.

Batch Washers
Designed to meet any laundry need, Girbau Industrial Batch Washers deliver
the ultimate flexibility, efficiency and wash quality. Thanks to a convenient
loading conveyor mono-block design, the TBS-50 Batch Washer is less costly and simpler to
install than comparable machines on the market, uses less water and energy,
runs quietly and delivers a quality wash for any fabric type. Designed for today
and tomorrow, the TBS-50 is an extremely flexible tunnel washer that can be
configured according to the unique needs of any high-volume laundry.

Water Extraction Presses

Designed to press laundry batches processed in any type of batch washer,
the press optimizes subsequent drying and ironing – making them less time-
batch washer consuming and more efficient. The press forms a round cake of laundry with a
flat base. With high-capacity drainage facilities, water is extracted quickly and
gently from all types of linen. The SPR-50 single-stage press is available in
three different positioning options at the batch washer outlet: in-line, turns to the
right, or turns to the left.
The SPR-50 water extraction press is delivered completely assembled and
factory tested which facilitates problem-free installation. Most of the SPR-50
press electrical components are the same as those used in theTBS-50 Batch
Washer and ST-100 Batch Dryer and are interchangeable, facilitating easy and
convenient servicing.
water extraction press

Conveyors
Girbau Industrial unloading conveyers distribute laundry batches to and from
various pieces of laundry equipment. The CEDD shuttle-lifting conveyor is the
appropriate machine to distribute laundry batches coming from a press installed
at the outlet of a batch washer. It is provided with two loading tables of 43.3
inches in width and 50.4 inches in length. Horizontal and inclined conveyers are
also available.

uploading conveyor Dryers

Girbau Industrial dryers are engineered to separate and condition a variety of
linen types, efficiently and quickly.
The 220-pound capacity ST-100 dryer – in steam, oil or gas – is designed with
SPIROTILT-GIRBAU, a revolutionary system that optimizes the drying process
and facilitates the unloading of laundry. With the slight drum inclination of only
2.5 degrees and the incorporation of inclined blades, the best drying process
is obtained along with the best unloading system. The ST-100 dryer has 16
different drying programs. Each program includes 8 phases.
dryers

9
FINISHING SYSTEM

Feeders
Feeders automatically and quickly situate items of laundry on a belt and feed
it into the flatwork ironer. The feeder and ironer are designed to work together
seamlessly. The DRF is a highly versatile feeder that adapts to the production
needs of the moment. So, it can work on 1 lane, 2 lanes or on 1 or 2 lanes
without distinction at 2, 3 or 4 working stations. The DRF automatically identifies
multi-station feeder
the width of a fed item and centers it on the lanes used.

HEATED CHEST Flatwork Ironers

Girbau Industrial heated chest flatwork ironers — in steam or oil and a
combination of natural gas and thermal oil — are available in multiple finishing
widths and up to three 32- or 48-inch diameter rolls. As rolls are added to the
ironer, fabric moves across the machine’s heated bed at greater speeds —
drying and finishing linens faster. The ironers enable one-pass finishing without
dryer conditioning. Perforated cylinders and a polished steel ironing bed provide
uniform pressure to achieve quality ironing results and optimum production. deep chest flatwork ironer

Folders
Girbau Industrial folders can accomplish lane and cross folds according to item
size. All folders are synchronized to work seamlessly with the flatwork ironers
to improve laundry finishing and productivity.

Stackers
Girbau Industrial stackers quickly and automatically stack laundry items.
folder
Once the number of items is reached, the stacked laundry advances on
a removable belt. Single- or double-sort configurations are available.

dual stacker and outlet conveyor

intelligent multi-sort folding technology customized delivery conveyor options high production small piece folding

10
 MODEL TBS-50/5 TBS-50/6 TBS-50/7 TBS-50/8 TBS-50/9 TBS-50/10 TBS-50/11 TBS-50/12
Capacity (per cylinder) lbs. (kg.) 110.2 (50)
Outer Cylinder Diameter in. (mm.) 76.8 (1950)
Inner Cylinder Diameter in. (mm.) 72.8 (1850)
Cylinder Depth in. (mm.) 30.7 (780)
cu. ft.
Cylinder Volume 74.2 (2100)
(dm.3)
Number of Wash Lifters 7
Washing Angle 270˚
Transfer Diameter in. (mm.) 33.5 (850)
Transfer Angle 450˚
12,677 13,889 15,101 16,314 17,526 18,739 19,951 21,164
Net Weight lbs. (kg.)
(5750) (6300) (6850) (7400) (7950) (8500) (9050) (9600)
19,841 22,487 25,132 27,778 30,423 33,069 35,714 38,360
Max. Working Weight lbs. (kg.)
(9000) (10,200) (11,400) (12,600) (13,800) (15,000) (16,200) (17,400)
Machine Width W in. (mm.) 85 (2160)
214.5 245.4 276.2 307.1 338 368.8 399.7 430.6
Machine Length L in. (mm.)
(5448) (6232) (7016) (7800) (8584) (9368) (10,152) (10,936)
Machine Height H in. (mm.) 112.1 (2848)
Opening Height H2 in. (mm.) 30.6 (777)
Washing Speed rpm 2-8
PSI
Max. Pressure to Floor 313 (22) 341 (24) 370 (26) 412 (29) 441 (31) 469 (33) 498 (35) 526 (37)
(kg./cm.2)

13.7 in (350 mm)

L
10.6 in 4.8 in
(269 mm) (123 mm)
TY

88.6 in
(2250 mm)
N

WA R R A H

H2
18.7 in
(475 mm)

Environmentally Friendly
Girbau S.A. laundry products meet rigorous environmental and safety standards established by the reener w
ag
International Organization for Standardization (ISO). With the utmost concern for the environment, the for
TBS-50 Batch Washer optimizes water usage during large-volume laundry processing by reusing extracted
y systems

orld
water and rinse water. Developed to reduce noise pollution as well, the TBS-50 Batch Washer is extremely
quiet thanks to inverter-controlled motors and gentle progressive movements. Additionally, the transmission
system gear is quiet and the steam inlets are equipped with silencers – making for a more appealing work
ndr

environment for users of the system. lau

Ever focused on laundry efficiency, Continental Girbau, the North American subsidiary of Girbau S.A., is a
member of the U.S. Green Building Council (USGB), a 501(c)(3) nonprofit that developed the Leadership
in Energy and Environmental Design (LEED) Green Building Rating System.
© 2010 Continental Girbau, Inc. Form No. B-GI-TBS-50 01/10

DISTRIBUTED BY:

www.girbauindustrial.com • 800-256-1073
2500 State Road 44 • Oshkosh, WI 54904 • 920-231-8222 • Fax 920-231-4666