Specifications and Options

Industrial Vacuum Loader

THE MOST INDUSTRY FIRSTS. THE M O S T I N D U S T R Y FAV O R I T E S .

We call it the Guzzler® CL®. As in Guzzler Classic. 9’-2.7”

11’-11.6”

As in the very model of what an industrial

14’-6”

Guzzler CL
vacuum loader truck should be. Durable.
22’-5”

Overall Length CA Height Width Weight Empty

296" (6.83 m) 174" (4.42 m) 143.6" (3.65 m) 102" (2.59 m) 36,000 lb (16,330 kg)

Dependable. And, of course, easy to operate. • Blower: Positive Displacement Dual-Lobe • Hydraulics: Hydraulic Pump Driven by Single-Mode Filtration System
or Tri-Lobe Available PTO; Hydraulic System Plumbing
• First Stage: Radial Deflection Wing
Assembled Using JIC Fittings and
• Bolt-On Dumptubes
Hydraulic Tubing; 50-Gallon (189.25-Liter) • Second Stage: Cyclone Centrifugal
• Maximum Vacuum Range: 16-28.5 Hg Hydraulic Tank Separator
(0.93 kg/cm2)
• 6" Air-Operated Relief Valve • Third Stage: Sixty 70" Dacron Filter Bags
They’re qualities that made the Guzzler CL an • Customized Ultra-Quiet Silencer (5 Micron); 10.72:1 Air-to-Cloth Ratio
• Heavy-Duty Subframe
• Maximum Airflow Range: 5,089-6,000 cfm • Fourth Stage: Microstrainer Final Filter
• Inline Vacuum Relief Valve
(8,647 cm3/hr)
3 3 Popular Options
• Payload Capacity: 18 yd -21 yd
• Bag Cleaning: Baghouse Is Equipped with
• High-Rail System
a 120 psi Bag-Cleaning Pulsation System • Rear Door Prop
• Hydraulic Vibrator
• Drive: Air-Shifted Transfer Case with • Collector Body: 1/4" (16.35 mm) Thick
industry innovator – and made industry followers Manual Override Construction; Rear Bulkhead Is 3/ 8" • Vane Pump Pressure Offload System
(9.525 mm) Thick Plate with Lower-Edge (5 psi)
• Liquid Level Float Ball Shut-Off
Reinforcement; Tailgate Is 1/2" (12.7 mm)
Thick, Supported by Two Heavy-Duty • Closed-Loop Catalyst Handling System
• Color-Coded, Function-Stamped,
Wiring Harness Hinges; 50° Dump Height and 15" • Loading Boom
(38.1 cm) Rear Overhang
• Controls: Tachometer, Blower Hourmeter, • Rear-Mounted Loading Cyclone
out of the competition. The Guzzler CL is as Pulsation System Air Pressure Gauge, • Debris Body Prop
Hydraulic System Pressure Gauge, Blower • Sludge Pump Offload System
• Back-Up Alarm
Vacuum Gauge, Blower Temperature Gauge • Washdown System
• Roadside Emergency Kit and
• Hydraulic Rear Door: Single-Lever • HEPA Filtration
Fire Extinguisher
Unlock/Open and Close/Lock
• Decant Valves
reliable as ever. But, thanks to a host of new Your Guzzler representative is: • Stainless Steel Module

features, it’s even better than you remember. Some items shown may be optional.
1621 South Illinois Street, Streator, Illinois, U.S.A. 61364 Specifications subject to change without notice.
(815) 672-3171 Phone • (815) 672-2779 Fax Guzzler® and CL® are registered trademarks of Guzzler Manufacturing.
www.guzzler.com Effective 3/06 P/N 00005B Printed in U.S.A.
Produced at Guzzler Manufacturing, Inc., whose quality management system is certified to ISO 9001:2000.
©2006 Federal Signal Corporation, listed on the NYSE by the symbol FSS.
 The Choice Is Yours.
G u z z l e r C L Vacuum Loaders Superior Design from the World Leader in Vacuum Solutions The Guzzler CL modular design allows you to select the offloading solution
that meets your specific needs, so you get minimal downtime and maximum
Advanced Guzzler CL Filtration Process productivity. Guzzler offers the widest selection of configurations of
Finding the ideal balance between filtration and ● Final stage: microstrainer ● Direct drive transfer case ● Advanced rear door design any manufacturer.
1/2 in (12.7 mm) steel-plate construction
productivity is what the Guzzler CL is all about. And, Final vacuum pump protection is or International
with improved air-routing features, the Guzzler CL provided by the microstrainer. This is the Factory-installed at Sterling to ensure prevents deflection and warping.
delivers even more air where you need it, at the working safety drop-out point for any items that correct alignment of all drive-line Tapered, locking, over-center chocks Offloading Options
end of the hose, while maintaining the lowest pressure may have entered the system during components. Directly couples vacuum and three top-mounting brackets ensure
drop of any machine in its class. servicing. A fine mesh screen prevents pump to chassis engine. Mounted on a positive, leak-proof seal. Central
foreign objects from entering the blower. vibration isolators to accommodate hydraulic manifold provides single
truck frame movement. Vulcan access point for adjustments. Two
● First stage: debris tank ● Easy cleaning and decontamination coupler or pulsation dampener not double-acting, hydraulic cylinders Cycrane with stand-alone cyclone
As vacuumed material enters the 18-cubic-yard debris All filter components are 100% accessible. required, as on other brands. (versus up to four on other brands) Designed for maximum flexibility. Ideal for
tank, air speed slows. This allows gravity to help the There are no material bridge-points in for less maintenance. Hinge blocks loading rail cars, dump trucks, elevated bins and
prefilter radial diversion wing remove the bulk baghouse and cyclone hoppers, as in ● Severe-duty chassis are shimmed to allow adjustment. silos. Heavy-duty crane with 1,400 lb (636 kg)
of material by deflecting particles to the bottom of other brands. Designed specifically for the capacity and 31 ft (9,449 mm) horizontal reach.
the tank. Guzzler CL. Factory-installed transfer ● State-of-the-art instrumentation Can be suspended over vessels up to 14 ft
● Top access case. Factory-installed, dash-mounted Controls mounted in a single, fully (4,267 mm) in height.
● Second stage: cyclone chamber Baghouse and cyclone top inspection blower and PTO controls for greater sealed panel for easy monitoring.
From the debris tank, the air flows to the secondary doors with spring-assist are easily reliability and ease of use. Jump-start Includes tachometer; blower
prefilter — the cyclone chamber — where centrifugal accessed via heavy-duty ladder and studs provided for remote equipment temperature, hydraulic pressure,
force hurls the denser particles to the cyclone wall platform. No disconnecting of the power supply. vacuum and air pressure gauges; and
and spirals them downward into the collection pulsation hoses required. hourmeter. Each circuit clearly
hopper. Material collected in this chamber is dumped ● Isolated strainer and silencers identified and individually grounded.
simultaneously when the debris tank is discharged. Independently mounted to prevent
During wet vacuuming, this prefilter serves as a vacuum pump case distortion. ● Standard operator safety features
highly efficient demister, extracting moisture from Includes body and rear door props,
the airstream. hydraulic check valves on all lift Tailgate-mounted sludge pump (not shown)
cylinders, back-up alarm and patented XCR
4 in (101.6 mm) removable, hydraulically
● Third stage: baghouse transfer case protection that prevents Original, patented system with unique
driven pumphead is ideal for unloading
The primary and secondary prefilters remove 98% of damage from shifting errors. Also swing-out cyclone allows material
all material from the airstream. Virtually all remaining discharge into collection vessels sludges from the debris body and may be
provides 6 in, air-operated relief valve
particles are removed in the baghouse. Sixty 70" with pendant control and an in-line, while vacuuming. (DF ACE shown) used during vacuuming.
Dacron® filter bags deliver an air-to-cloth ratio of 2 manual safety-T.
10.72:1. Material collected in the baghouse hopper High-rail system (shown on page two)
is dumped simultaneously with the main No one provides a more complete high-rail
payload compartment. system than Guzzler. Available in three
configurations, this option can be as simple
as adding high-rail gear to a standard Guzzler.
Or choose a fully equipped high-rail cleaning
PROVEN PERFORMANCE IN : system that features a loading boom, cycrane,
hydraulic creep drive and rear-mounted
operator chair, where complete operation
• Steel mills • Railroads • Oil refineries • Chemical plants ●1 can be achieved from a single position while
loading or driving over the rails.
●3
• Cement plants • Foundries • Shipyards and docks Vane pump (not shown)
Ideal for fast vacuuming and pressure
offloading of liquid material. The system
• Power generating stations • Metal mining • Phosphate plants features a 250 cfm, 27 in Hg vane pump, as
well as all options required for pressurizing
●4 the non-ASME debris tank up to 6 psi.
• Bridge painting • Grain elevators • Aluminum plants

• Glass manufacturing • Waste-to-energy plants

• Pulp and paper mills • Material processing plants

• Lime and coal plants • Water and sewage treatment plants