Fiber Optic Sensors: The New Standard in Simplicity

NEW Digital Fiber Optic Sensor
FS-V30 Series
Fiber Optic Sensors

The New Standard in Simplicity
MEGA-Power, MEGA-Easy
& MEGA-Stable
KEYENCE has further improved the top selling FS fiber sensors.
New features on the FS-V30 will help you to solve your sensing needs.
Digital Fiber Optic Sensors

F S - V 3 0 M a i n F e a t u r e s
World's most powerful beam

Received light intensity Max display 64,512
times more powerful beam
MEGA
than conventional models
16-bit
Stable detection in harsh environments.

Longer detecting distance with miniaturized fibers. 64times
higher
FINE 12-bit
0 10,000 20,000 30,000 40,000 50,000 60,000
World's first power booster switch

Easy power control
The highest power setting can be selected with a DIP switch.
Set button Manual button
3
DIP switch
World's first automatic setting value tracking function

Received light
Not affected by environmental intensity
Conventional Sensors cannot adjust the SET
changes over time value and will fail if the received light intensity
drops too low due to dirt or misalignment
Current value
Equipped with the DSC Function which
Setting value Fixed setting value
adjusts the setting value as it tracks (conventional)
DSC automatically
the current value in real time. adjusts the SET value based
on decreased light intensity
due to dirt or misalignment DSC Function
Setting Value
Adjustment in real time (FS-V30)
Time
Program memory
Reload your application settings
Saving your settings
Operators or users may accidentally change
the settings on the FS. In this case, conventional
models require resetting. The FS-V30 saves Load the settings
your settings into memory for fast recovery.
F S - V 3 0 P e r f o r m a n c e
Highly stable detection

The improved ASIC significantly improves performance.
KEYENCE has developed a special 16-bit CPU for fiber sensors
Powered by the FALCON IV
High speed
High-speed: Automatic sensitivity tracking function :
Ultra High-speed mode DSC function
Dynamic range 64 times higher than Faster More

than ever stable
conventional models. At a detection The influence of
speed five the environment
Introducing the FALCON IV, our latest upgrade in a revolutionary times as is cancelled
high as
line of custom CPU’s designed by KEYENCE specifically for conventional
models
our fiber optic sensors.The FALCON IV is equipped to
simultaneously control several functions: high-speed computing
of received light intensity, adjusting the setting value in real time
4 and dual digital display. Compared with conventional CPU’s which
operate sequentially, the FALCON IV calculates all information in
parallel. This achieves higher performance and speed.
More Powerful than ever MEGA:
About 64 times more powerful than FINE mode Ultra High-power Mega mode
Long distance
Automatic sensitivity tracking function [WORLD's BEST]

Automatically adjust the setting value.
The DSC (Dynamic Stability Control) Function automatically With Setting value adjustment (DSC Function)
3000 1
adjusts the threshold according to received light intensity Received light
intensity With fixed setting value
variations due to dust or dirt in real time. This function allows (digital value) (conventional models)
maintenance free operation over extended periods of time, 2
saving time and money.
DSC Function
Setting Value
Adjustment in real time (FS-V30)
Sensitivity is configured Initial setting Change with

by simply pressing the the passage of time
SET button. The sensitivity 1 2
can be set as a percentage Conventional models 2000 3000 2000 1500
(+/-99%) of the received Setting value Current value Setting value Current value
light intensity. DSC Function 2000 3000 1000 1500
The setting value follows
Detecting a thin target using thrubeam type

Highest power [WORLD's BEST]
More reliable detection in harsh environments. Detecting distance: 1000mm (39.37") with thin-sleeve fiber
Approx twice the distance compared with conventional models .
Longer detection distance with thin-sleeve fibers.
The FALCON IV chip provides the highest power - MEGA mode.
This power is essential for reliable detection in harsh environments.
It also increases the detection range of miniaturized fibers.
MEGA
U L TRA
SU PE R
4 times 4 times
Detecting the position of targets using a thin fiber.
2 times higher received
TU RBO intensity range
2 times
FIN E
MAXIMUM DISPLAY
0 5,000 10,000 15,000 20,000 30,000 40,000 50,000 60,000 65,000
Set button Highly visible dual digital display Digital trim pot Mode button Output
Automatic The dual screen differentiates the size of the More convenient than ever Monitor and operation selection button
calibration setting. setting value and current value for high visibility. while maintaining an easy mode selection. Light-ON or Dark-ON
single button operation. output selection.
Bright and clear Power booster switch

operation indicator Quickly switch to MEGA high-power
Twice the size of conventional indicators. mode using this DIP switch.
Equipped with a Power booster switch

Power selection without a complicated procedure.
Conventional models require complicated menu operations to
select the power settings. Power settings can be adjusted using
a single DIP switch.
Fine MEGA
The illustration shows simulated light beams

F S - V 3 0 N e w F e a t u r e s
New Sensor Options

oooooooooooooooooooooooooooooooooooooooooooooooooo
Wide variety
Various amplifier designs applicable to any job.
1-output [NEW] 2-output [NEW] Analog output [NEW]

M8 connector M8 connector
FS-V31M
FS-V31C(P) FS-V33C(P)
FS-V32C(P) FS-V34C(P)
Cable [NEW] Cable [NEW]

6 FS-V31(P) FS-V33(P)
FS-V32(P) FS-V34(P)
ON/OFF
analog
2-output type Output 1 is used for detection. Output 2 can be selected to output
when a counter, alarm or limit has been reached.
Analog output type Outputs 1 to 5 V according to the detection quantity (digital display).
It can be used for a wide range of applications such as position control or multi-level detection.
M8 connector type is also available.

Area output Counter mode
Ignore background interference. Simultaneous count of workpieces
Set an upper and lower detection level. The Counter function can easily count
The FS-V30 will output when the received signal is work pieces without the need for external
between the setting limits. counters or a PLC.
AREA OUTPUT
Light
source
2000 Threshold1
1000 Threshold2
Output Time
ON
OFF
In the example above, the output is ON only
when the received value is between 1000 and 2000
Time
Counter
Preventing operational errors

Password lock function
With the Password Lock function, only authorized operators
can modify the settings on the FS-V30. Since the Password
Levels are selectable, operation errors can be prevented.
7
Time
Threshold value Power modes/

MENU Settings
settings Light-on/Dark-on
LEVEL 1 Locked Locked Locked
LEVEL 2 Unlocked Locked Locked Can output signals

at the preset value
LEVEL 3 Unlocked Unlocked Locked
* Counter function is available

only on a 2 output unit
Highest speed [WORLD's BEST]

Amazing 33 µs response speed!
33 µs response allows the FS-V30 to detect up to 15,150
workpieces per second. In addition, minute targets can be
set on-the-fly with simple, one touch calibration.
*Conventional models count max. 10,000 targets per second even in high-speed mode
Max. 10,000 counts per second

Conventional
model
Max. 15,150 counts per second
High-speed
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 16,000 Counting components
F S - V 3 0 R e l i a b l e
Power is supplied through
the connector, and expansion
units can be connected
through single line.
Reliable expansion units

KEYENCE's original 1-Line system is featured
on the FS-V30 Series.
[ 1-Line system ]
Power is connected through the side
connector. Expansion units have a lndustry’s thinnest
single output wire. 9.8 mm
1 Shock absorber function incorporated

The connector is provided with a 2
spring mechanism for shock absorption.
2 Dust cover provided 1

Connector
The dust cover prevents the exposure of for One-line
system expansion
the connector pins.
Interference prevention function up to 16 units

8
Reliable detection with stable interference prevention.
The FS-V30 electrically delays the timing of light emission between MODE FinE Turb SuPr ULtr MEGA
connected units. Up to 16 connected units can utilize the interference Std (Standard) 4 units 8 units
prevention function providing stable system performance. dobl (Double) 8 units 16 units
Wire saving connection method (when 10 units are used)

Conventional method Single-line method
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
Nunber of terminal blocks : 20 Nunber of terminal blocks : 12
LOCK LOCK LOCK LOCK LOCK LOCK LOCK LOCK LOCK LOCK
OFF.D OFF.D OFF.D OFF.D OFF.D OFF.D OFF.D OFF.D OFF.D OFF.D
ON.D ON.D ON.D ON.D ON.D ON.D ON.D ON.D ON.D ON.D
OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF
L.ON L.ON L.ON L.ON L.ON L.ON L.ON L.ON L.ON L.ON
Number of wires : 58 Number of wires : 24

D.ON D.ON D.ON D.ON D.ON D.ON D.ON D.ON D.ON D.ON
FS-T1 FS-T1 FS-T1 FS-T1 FS-T1 FS-T1 FS-T1 FS-T1 FS-T1 FS-T1
Nunber of jumper wires : 8 Nunber of jumper wires : 0

Saves space
Required working time : 120 min. Required working time : 50 min.
All red wires will be unnecessary
Combination with other sensor models is possible

A full line of models showing proven results and high reliability.
It is possible to combine the FS-V30 sensors with From left to right
FS-V31:____Fiber optic sensor
other KEYENCE 1-line sensors. Fiber, Color, Laser, CZ-V22A:__ RGB digital color sensor
LV-12SA:__ Digital laser sensor
Photoelectric and Proximity sensors are all available PS-T2:____ Photoelectric sensor with
in the 1-line system. separate amplifier
ES-M2:____ Long-distance separate
amplifier proximity sensor
Adjustment/external setting
%Tuning Display scaling

You can set the sensitivity with just the touch of a button. When light You can adjust the light intensity on the display.
intensity values fluctuate due to dust or misalignment, you can adjust In this way, each amplifier can display the same value
the sensitivity by a fixed percentage. (+/-99%) for the same target. (1 output type only)
Setting value Current value

When
setting
-10%
Set the value 10% less

[ External Input ] Fiber transmission stop input
Small differences in received light quantity can be compensated via external
input. This ability provides continuous and stable detection. When the external input is activated, LED transmission
will stop on the Main unit and all connected Sub units.
Shift Function
Adjust the current received light intensity to “0”. For example. you can
[Example of use] •Troubleshooting at sensor startup
zero the received light intensity from a reflective sensor so that the
•Preventing interference with other sensors
background will display “0”. This function is effective when there are
only small differences between targets received light intensity.
External tuning
Sensitivity can also be externally set by a PLC.
The external input works the same as the SET button.
Setting value Current value Setting value Current value
Improved operation
9
Ergonomic button layout Ergonomic Design

The amplifier was designed for ease of use, and error
Automatic setting button
prevention.The SET value and the Current value on the Manual setting button
Buttons are
display are different heights and colors, improving visibility. higher
The SET button and manual buttons are separated to
prevent operator error. In addition, the SET button and
manual buttons are higher and larger than the other
buttons, for easy setup.
Standard main display

Display customizing Function Setting value Current value
Only the main display is active by default.

Display will not change
Conventional models can be easily switched to when a button is pressed by accident
unwanted display modes by accident, confusing operators.

The FS-V30 will only display the Six selectable displays
Setting Value and the Current Value
5 digits (extended) display Bar LED/Current value Bar LED/Excess gain
by default. If operators prefer to
display an analternate format, such
as Bar LED’s, they can select from Inspection mode/Current value PEAk/botm Excess gain PEAk/botm
6 additional options in the menu.
F S - V 3 0 R e l i a b l e
Useful functions to cope with

various applications
oooooooooooooooooooooooooooooooooooooooooooo
Inverted display Power saving

Depending on the mounting direction, some displays POWER SAVING FUNCTION
may be inverted. The digital display on the FS-V30 can The lowest power consumption in its class thanks to
be inverted, providing easy to read displays. the MEGA FALCON chip.
The green indicator is

Normal Reverse lit when nothing is detected.
The display can be turned off to
reduce power consumption
Harsh environments/Changes over time

10
S-APC MODE + 4-ELEMENT LED EDGE INSPECTION MODE

The ultimate in long term stability. Unaffected by dirt or temperature change.
The selectable S-APC function maintains a constant light level This mode ignores slight variations of light intensity by dirt
over time. The 4-element LED prevents diode deterioration or temperature, and detects only the targets. It can detect
over an extended period of time. Together, these functions slight differences of light intensity without readjustment
make the FS-V30 Series the easy choice for long-term, of the sensitivity.
maintenance-free operation.
[Timer Function]
Equipped with 5 timer Functions. The Timer function can
Emitted Emitted
be individually set for each output 1and 2 from 0.1 ms to 9999 ms.
light light
quantity quantity
Conventional S-APC • ON-delay • One-shot
• OFF-delay • ON-delay with OFF-delay
• ON-delay with One-shot
Time Time
Preventing saturation
ATTENUATE FUNCTION
In situations where fiber units have to be mounted in
close proximity to a highly reflective background,
the amplifier may saturate. The selectable attenuation
function adjusts transmission intensity, allowing the
FS-V30 Series to be used in close proximity (enabled)
or from long distance (disabled)

Simple sensitivity settings
FULL AUTOMATIC CALIBRATION

No need to stop targets
When detecting falling or minute targets, it is very difficult to
make sensitivity adjustments to manual fiber-optic sensors.
Fully automatic calibration is unique to digital sensors.
A suitable sensitivity is set by pressing the SET button while
the target passes through the sensiting area.
Detecting dropping targets
MAXIMUM SENSITIVITY SETTING

Ignore backgrounds
The sensitivity of the FS-V30 can be set to the maximum
level to ignore background surfaces. This feature also makes
it possible to detect targets while suppressing the influence Background
of dust.
Background is not detected Sensor turns ON when the target enters

the sensing area
Application modes for the 2 output type sensors

11
LIMIT MODE Received light intensity decreases without target
When dust builds up on the Alarm output value

sensor, the maximum light when PEAK is selected
intensity will decrease. This 1 ch threshold

mode sets an alarm value
which can notify operators
when the peak level of light
intensity becomes too low.
Time
ON
2 ch alarm output
OFF
ALARM MODE
Conventional models display “END APC” when the APC
Function ends. The FS-V30 sends an alarm signal while
displaying “END APC”. It can also be used as an
adjustment alarm output when using the DSC Function.
OTHER FS SENSORS
TRIM-POT TYPE TEACHING TYPE

FS-M Series FS-T Series
• Fine adjustment by using • Fully-automatic calibration by
a multi-turn trimmer pressing a button
• Ultra-high-speed response model • Green LED light source model
FS-M1H is also available FS-T1G is also available
FIBER UNIT V a r i a t i o n
All fiber units are available for

same-day shipment.
Our technical sales staff will select the best unit for you.
888-KEYENCE
Stainless steel armor

Stainless jacket structure
The outer braided shield adds strength Protective
against pulling, and the inner flexible bralded shield
spiral shield increases the strength
against side impact.
Flexible
spiral shield
12
Tough Flex
Conventional fiber ToughFlex fiber Super ToughFlex fiber
Minimum bending radius : R0.98" 25 mm Minimum bending radius : R0.08" 2 mm Minimum bending radius : R0.02" 0.5 mm
217 613
Core fiber
Core fiber
Single-core fiber A single-core fiber that is 217-core fiber A 217-core fiber is hardly 613-core fiber A 613-core fiber offers
exposed to excessive affected by excessive the best performance.
bending will easily break. bending.
KEYENCE ONLY
Space-saving, trouble-free Easy mounting
All Hex-shaped fiber units allow neat cable routing Secure the unit with a single nut. Your current,
and require less space for installation. standard fiber unit can be replaced without
0º
Hex-shaped This eliminates problems such as entangled cables. additional preparation or modification.
Unbreakable fiber 90º

The cable features a
unbreakable fiber with the
tip of the fiber bent at a
right angle, like a
periscope. This design
requires far less space Space-
than conventional models.
(Patent pending)
saving
Standard Small
Beam
Spot
Reflective
P.14
Thrubeam
P.17 FU-35TZ FU-67TZ FU-77TZ FU-66TZ P.17 FU-10
Flat Sleeve
Reflective Reflective FU-32

P.14 P.15
Thrubeam Thrubeam
P.18 FU-41TZ FU-53TZ P.18 FU-33 FU-63Z
Retro- Narrow
reflective beam
13
P.15 FU-15 FU-13 P.18 FU-18M FU-18
High-Flex Definite-
reflective
FU-37
Reflective
P.15
Thrubeam
P.18 FU-59 FU-69X P.15 FU-38 FU-38S
Heat LCD/
Resistant Semi-
conductor
FU-18
Reflective
P.16
Thrubeam
P.19 FU-86Z FU-81C P.15 FU-38R
Chemical Liquid
proof Level
Reflective
P.16
Thrubeam
P.19 FU-96 FU-92 P.16 FU-95Z FU-93Z FU-95S
F I B E R U N I T Fiber Unit Selection Chart By Type.
Unit: inch mm
Category Reflective Standard ( MEGA FINE )

Detecting distance 2. Smallest 1. Minimum
Type Shape detectable bend Features Model
MEGA / FINE object radius
M4
13.78" 350
ø0.0002" R0.08" FU-66TZ
ø0.005 Hex-shaped
-40 to 122°F 1.97" 50 R2 (Approx. 10 g) Free- 6.6'
(-40 to +50°C) (gold wire) cut 2m
M6 ø0.0002" R0.08" FU-67TZ
19.69" 500 ø0.005 Hex-shaped
-40 to 122°F 2.95" 75 R2 (Approx. 32 g) Free- 6.6'
M4
15.75" 400 ø0.0002" R0.08" FU-66Z
ø0.005 R0.08" R2
-40 to 122°F 2.36" 60 R2 M4 (Approx. 10 g)
Free-
cut
6.6'
(-40 to +50°C) 0.59" 15 (gold wire) 2m
ToughFlex
M6
19.69" 500
ø0.0002" R0.02" R0.02" R0.5
FU-67V
-40 to 122°F 3.35" 85 ø0.005 Free- 6.6'
R0.5 M6 (Approx. 25 g)
(-40 to +50°C) 0.63" 16 (gold wire) cut 2m
M6
19.69" 500
ø0.0002" R0.08" R0.08" R2 FU-67
-40 to 122°F 3.35" 85 ø0.005 Free- 6.6'
R2 M6 (Approx. 21 g)
ø0.12" ø3 ø0.0002" R0.08" R0.08" R2
FU-4FZ
15.75" 400 ø0.005
-40 to 122°F 2.36" 60 Free- 6.6'
Standard
R2 ø0.12" ø3 (Approx. 8 g) cut

(-40 to +50°C) 0.67" 17 (gold wire) 2m
M6
26.77" 680
ø0.0002" R0.08"
Long-deteting distance FU-61Z
-40 to 122°F 4.92" 125 ø0.005 Free- 6.6'
M6 ø0.0002" R0.39" FU-67TG
19.69" 500 Hex-shaped
Armored
-40 to 122°F 2.95" 75 ø0.005 R10 3.3'

Armored (Approx. 32 g)
(-40 to +50°C) (gold wire) 1m
M6 ø0.0002" R0.39"
19.69" 500 ø0.005 R0.39" R10 FU-67G
-40 to 122°F 3.35" 85 R10 Armored (Approx. 29g) 3.3'
(-40 to +50°C) 0.67" 17 (gold wire) 1m
M4
27.56" 700 Long-deteting distance
FU-66
-40 to 158°F 4.92" 125 M4 (Approx. 10 g) Free- 6.6'
(-40 to +70°C) 0.59" 15 cut 2m
M6 ø0.0002" R0.98" FU-6F
27.56" 700 ø0.005 Long-deteting distance
Standard
-40 to 158°F 4.92" 125 R25 Free- 6.6'

(gold wire) M6 (Approx. 21 g) cut
(-40 to +70°C) 0.67" 17 2m
ø0.12" ø3
27.56" 700 Long-deteting distance FU-4F
-40 to 158°F 4.92" 125 ø0.12" ø3 (Approx. 8 g) 6.6'
Free-
(-40 to +70°C) 0.67" 17 cut 2m
M6
37.40" 950
ø0.0002"
R0.98" Long-deteting distance FU-61
-40 to 158°F 7.87" 200 ø0.005 Free- 6.6'
1. The smallest detectable object was determined at the optimal detecting distance and sensitivity setting.
2. Standard target: White matte paper (Reflective type only.)
14 Category Reflective Flat/Coaxial ( MEGA FINE )

0.28" 7.2
FU-47TZ
Side-
ø0.0002" R0.08"
Flat head (with mounting hole)
view
0.04" to 3.54" 1 to 90 Compact side-view type

0.41" 10.5 ø0.005
-40 to 122°F 0.04" to 0.98" 1 to 25 R2 (Approx. 4 g) Free- 3.3'
0.08" 2 ø0.0002" R0.08" FU-41TZ
0.08" to 2.36" 2 to 60 Ultra-thin, flat-ON
Top-view
-40 to 122°F 0.28" 7 0.08" to 0.39" 2 to 10 ø0.005 R2 Free- 3.3'

(Approx. 5 g)
0.16" 4 ø0.0002"
0.04" to 12.60" 1 to 320
R0.08" Flat-on versatile FU-42TZ
0.28" 7 ø0.005
-40 to 122°F 0.04" to 1.46" 1 to 37
(gold wire) R2 (Approx. 24 g) Free- 6.6'
(-40 to +50°C) cut 2m
0.31" 8 ø0.0002" R0.08" FU-44TZ
End-
view
-40 to x122°F 0.04" to 3.54" 1 to 90 ø0.005 Compact, top-view Free- 3.3'

0.26" 6.5 0.04" to 0.98" 1 to 25 R2
cut
(-40 to +50°C) (gold wire) 1m
M6 ø0.0002" Suitable for positioning FU-25
High-power
22.05" 560 R0.98"

-40 to 158°F 3.94" 100 ø0.005 R25 M8 (Approx. 18 g) Free- 6.6'
ø12" ø3
26.77" 680
ø0.0002"
R0.98"
Suitable for positioning FU-23X
-40 to 158°F 4.92" 125 ø0.005 ø0.12" ø3 19.69"
R25 50 cm
(-40 to +70°C) 0.67" 17 (gold wire) (Approx. 4 g)
M3 ø0.0002" 0.016" 0.4 spot FU-35FA
13.39" 340 R0.98"
-40 to 158°F ø0.005 diameter with F-2HA Free- 3.3'
1.77" 45 R25
(-40 to +70°C) 0.91" 23 Lens: F-2HA, F-3HA, F-4HA, F-5HA, F-6HA (gold wire) (Approx. 6 g) cut 1m
M3 M3, 0.016" 0.4 spot FU-2303
-40 to 122°F diameter with F-2HA 3.3'
(-40 to +50°C) ø0.0002" R0.08" Armored (Approx. 15 g) 1m
Lens attachment available
0.71" 18 7.87" 200 ø0.005

Coaxial
1.26" 32 R2
M3 (gold wire) M3, 0.016" 0.4 spot FU-35FZ
diameter with F-2HA
-40 to 122°F Free- 3.3'
(-40 to +50°C) 0.67" 17 Lens: F-2HA, F-3HA, F-4HA, F-5HA, F-6HA (Approx. 6 g) cut 1m
M3 M6 ø0.0002" R0.39" FU-35TG
7.09" 180 ø0.005 Hex-shaped armored
-40 to 122°F 1.18" 30 R10 (Approx. 32 g) 3.3'
(-40 to +50°C) Lens: F-2HA, F-3HA, F-4HA (gold wire) 1m
M3 ø0.0002" R0.08" FU-35TZ
7.09" 180 ø0.005 Hex-shaped (Approx. 7 g)
-40 to 122°F 1.18" 30 R2 Free- 3.3'
(-40 to +50°C) Lens: F-2HA, F-3HA, F-4HA, F-6HA (gold wire) cut 1m
M3 ø0.0002" 0.008" 0.2 spot FU-21X
3.54" 90 ø0.005 R0.98" diameter with F-2HA
-40 to 158°F 0.59" 15 R25
19.69"
(-40 to +70°C) 0.59" 15 Lens: F-2HA, F-6HA (gold wire) (Approx. 4 g) 50 cm
M3 ø0.0002" R0.39" 0.004" 0.1 spot FU-24X
-40 to 158°F 2.17" 55 ø0.005 diameter with F-2HA 19.69"
0.31" 8 Lens: F-2HA R10 (Approx. 4 g) 50 cm
(-40 to +70°C) 0.59" 15 (gold wire)
Unit: inch mm
Category Reflective Area/High-power/Retro-reflective/High-Flex ( MEGA FINE )

Thickness: 0.28" 7 ø0.0002" ø0.005 Area detection FU-11
0.20" to 6.30" 5 to 160 R0.98"
Area 0.20" to 4.72" 5 to 120 (gold wire) width of 0.59" 15 6.6'
-40 to 158°F R25 Free-
(Parallel) (Approx. 19 g) cut 2m
(-40 to +70°C) 1.10" 28
Thickness: 0.20" 5.2 ø0.012" ø0.3 R0.08" Long-detecting distance FU-40
High-Power
(copper wire) Narrow beam

-40 to 122°F
(Vertical) R2 (8°)type Free- 6.6'
(-40 to +50°C) 0.83" 21 1.18" to 59.06" 30 to 1500 (Approx. 23 g) cut 2m
1.18" to 5.91" 30 to 150
Thickness: 0.20" 5.2 ø0.012" ø0.3 R0.39" Long-detecting distance FU-40G
Narrow beam (8°)type
-40 to 122°F (copper wire) 3.3'
R10 Armored
(-40 to +50°C) 1.10" 28
(Vertical) (Approx. 50 g) 1m
Retro- reflective
FU-13
Long- Super
distance small
3. R0.08"
0.39" to 18.90" 10 to 480 3. M6 Super small
-40 to 122°F 0.39" to 2.36" 3. 10 to 60 3. – Free- 6.6'
R2 (Approx. 8 g)
(-40 to +50°C) cut 2m
detecting
Thickness: 0.11" 2.8

3.94" to 125.98" 100 to 3200
R0.39" Square-shape, FU-15
-40 to 131°F 3.94" to 24.80" 100 to 630 – long-distance
Free- 6.6'
R10 (Approx. 12 g)
(-40 to +55°C) 1.10" 26.9
cut 2m
M4
6.30" 160 ø0.0002" ø0.005 R0.16" High-flex fiber FU-68
M4 -40 to 158°F 1.38" 35 (gold wire)
M4
Free- 6.6'
R4 (Approx. 8 g)
(-40 to +70°C) 0.59" 15 cut 2m
M3
2.95" 75 ø0.0002" ø0.005
R0.16" High-flex fiber FU-69X
M3
High-Flex
-40 to 158°F 0.79" 20 M3 3.3'

(gold wire) R4 (Approx. 3 g)
(-40 to +70°C) 0.39" 10 1m
ø0.12" ø0.12" ø3 6.30"160 ø0.0002" ø0.005 R0.16" High-flex fiber FU-48

-40 to 158°F 1.38" 35 ø0.12" ø3 6.6'
ø3 (gold wire) R4 (Approx. 7 g) Free-
(-40 to +70°C) 0.59" 15 cut 2m
ø0.06" ø0.06" ø1.5 2.95" 75 ø0.0002" ø0.005
R0.16" High-flex fiber FU-49X
-40 to 158°F 0.79" 20 ø0.06" ø1.5 3.3'
ø1.5 (gold wire) R4 (Approx. 3 g) 1m
(-40 to +70°C) 0.59" 15
3. When the R-2 (OP95388) is used: MEGA offers 0.39" to 37.01" 10 to 940 mm and FINE, 0.39" to 4.92" 10 to 125 mm.
Category Reflective Thin-sleeve ( MEGA FINE )

ø0.08" ø0.11"
Do not bend sleeve. ø2 ø2.8 3.35" 85 ø0.0002" ø0.005
R0.39" Compact FU-31
Side-view
6.6'
Side-view
-40 to 158°F 0.67" 17 (copper wire) R10 (Approx. 5 g) Free-

(-40 to +70°C) 0.59" 0.59" 15 15 cut 2m
Min. bend radius of ø0.08" ø0.19"
sleeve: 0.98" 25 ø2.1 ø4.8
7.09" 180 ø0.0002" ø0.005 R0.98" Long-sleeve FU-33
Side-view
-40 to 158°F 0.98" 25 (copper wire) R25 (Approx. 10 g) Free- 3.3'
(-40 to +70°C) 2.56" 65 0.59" 15 cut 1m
ø0.02" ø0.06"
Do not bend sleeve. ø0.5 R0.39" FU-46
-40 to 158°F
ø1.5 0.59"15
0.12 3
ø0.0002" ø0.005
(gold wire) R10
Thin-sleeve
(Approx. 10 g) 3.3' 15
(-40 to +70°C) 0.12" 3 0.59" 15 1m
ø0.03" ø0.12"
Do not bend sleeve. ø0.82 ø3
1.77"45 R0.08 Thin-sleeve
FU-45X
ø0.0002" ø0.005
-40 to 158°F 0.31" 8 (gold wire) R2 (Approx. 4 g) 19.69"
(-40 to +70°C) 0.20" 5 0.59" 15 50 cm
ø0.06"
Do not bend sleeve. ø1.65 ø0.16" ø4 Thin-sleeve FU-43
Thin-sleeve
7.09" 180 ø0.0002" ø0.005 R0.98"

ø0.16" ø4
-40 to 158°F 1.46" 37 (gold wire) R25 (Approx. 8 g)
Free-6.6'
(-40 to +70°C) 0.87" 22 0.59" 15 cut 2m
End-view
ø0.03" M3 FU-65X
Do not bend sleeve. ø0.82 R0.16
1.77"45 ø0.0002" ø0.005 Thin-sleeve
-40 to 158°F 0.31" 8 (gold wire) R4 (Approx. 8 g) 19.69"
(-40 to +70°C) 0.59" 15 0.59" 15 50 cm
Min. bend radius of ø0.06" M4
sleeve: 0.39" 10 ø1.65 7.09" 180 ø0.0002" ø0.005 R0.98"
Long-sleeve FU-63
M4
Free-6.6'
(-40 to +70°C) 2.64" 67 0.59" 15 cut 2m
Min. bend radius of ø0.06"
sleeve: 0.39" 10 ø1.65 7.09"180 ø0.0002" ø0.005 R0.98"
Long-sleeve FU-63T
Flat type
Free- 6.6'
(-40 to +70°C) 2.64" 67 0.59" 15 cut 2m
Min. bend radius of R0.08 R0.08" R2
sleeve: 0.39" 10
ø0.08"ø2 M4 5.12" 130 ø0.0002" ø0.005 M4 FU-63Z
-40 to 122°F 0.98" 25 (gold wire) R2 with sleeve Free- 6.6'
(-40 to +50°C) 2.64" 67 0.59" 15 (Approx. 10 g) cut 2m
Coaxial,
ø0.07" ø0.10"
narrow
Do not bend sleeve. FU-22X

beam
ø1.77 ø2.5 1.89" 48 R0.98" Thin-sleeve

ø0.0002" ø0.005 Narrow-beam type
-40 to 158°F 0.39" 10 (gold wire) R25 19.69"
2.64" 6 0.55" 14 (Approx. 4 g) 50 cm
(-40 to +70°C)
Category Reflective Definite-reflective ( MEGA FINE )

0.75" 19 Thickness: 0.20" 5
ø0.0002" ø0.005 R0.39" Compact, straight
FU-37
-40 to 158°F 0.12" 3 center of detecting distance Free-6.6'
0.57" (gold wire) R10 (Approx. 6 g)
Short-detecting
(-40 to +70°C) 14.4

cut 2m
Thickness: 0.16" 4
distance
0.47" R0.39" Thin-profile, FU-38

12 0.24" 6 center of detecting distance ø0.0002" ø0.005
-40 to 158°F R10 standard Free- 6.6'
(gold wire) (Approx. 5 g)
(-40 to +70°C) 0.75" 19
cut 2m
0.47" Thickness: 0.17" 4.3 Thin-profile,
R0.39" FU-38V
Definite-reflective
12 0 to 0.16" 0 to 4 ø0.0031" ø0.08 short-detecting

-40 to 158°F (copper wire) R10 distance Free- 6.6'
(-40 to +70°C) 0.75" 19 (Approx. 5 g) cut 2m
Thickness: 0.14" 3.6
Long-detecting
0.81" R0.20"
Long-detecting
FU-38S
20.5 0 to 1.02" 0 to 26 distance,
-40 to 158°F – 6.6'
distance
R5 definite-reflective Free-
(-40 to +70°C)
1.14" 29 (Approx. 20 g) cut 2m
0.87" Thickness: 0.15" 3.8 Thin-profile,
FU-38R
22 0 to 0.55" 0 to 14 ø0.012" ø0.3 R0.98" long-detecting
-40 to 158°F (copper wire) R25 distance Free- 6.6'
(-40 to +70°C) 1.14" 29 (Approx. 20 g) cut 2m
Heat resistance:
Heat-resistant
0.10 to 2.56" 2.5 to 65 356°F (180°C) FU-38H

-40 to 356°F – R1.38"
0.10 to 0.63" 2.5 to 16 R35 definite reflective Free- 6.6'
(-40 to +180°C) 1.06" 27 (Approx. 45 g) cut 2m
Heat resistance:
0.10 to 2.56" 2.5 to 65 R0.98" 482°F ( 250°C) FU-38K
-40 to 482°F –
0.10 to 0.63" 2.5 to 16 R25 definite reflective 3.3'
(-40 to +250°C)
1.46" 37 (Approx. 45 g) 1m
Unit: inch mm
Category Reflective Oil-proof/Chemical proof/Heat-resistant ( MEGA FINE )

Oil-proof, ø0.18" ø4.5 ø0.0002"
FEP fiber FU-91
8.66" 220 R1.57"
Chemical -22 to 158°F 2.95" 75
ø0.005
(Approx. 32 g) 6.6'
Free-
proof (-30 to +70°C) (0.79") (20) (gold wire) R40 cut 2m
M6 ø0.0002" R0.20" R5
212°F 18.11" 460
R0.20"
Heat resistance: FU-85Z
-40 to 212°F 3.15" 80 ø0.005 R5 6.6'
(100°C) (gold wire)
212°F (100°C) Free-
(-40 to +100°C) 0.67" 17 (Approx. 25 g) cut 2m
M6 ø0.0002" Heat resistance: FU-85
221°F 26.77" 680 ø0.005 R0.98" 221°F (105°C ), M6
(105°C) -40 to 221°F 4.72" 120 R25 Free- 6.6'
(-40 to +105°C) (gold wire) (Approx. 21 g) cut 2m
0.67" 17
Heat-resistant
M6 ø0.0002" Heat resistance: FU-87

356°F 22.44" 570 ø0.005
R1.38"
356°F (180°C ),
(180°C) -76 to 356°F 3.54" 90 R35
M6 (Approx. 33 g)
Free- 6.6'
M4 Heat resistance:
Min. bend ø0.08" ø2.1 FU-81C
662°F radius of 15.75" 400 662°F (350°C)
-22 to 662°F 2.95" 75 with sleeve 3.3'
(350°C) sleeve: 1m
(-30 to +350°C) 0.39" 10 90 3.54"0.98" 0.59" 15 (Approx. 24 g)
25
Min. bend ø0.08" ø2.1M4 ø0.0002" R0.98" Heat resistance: FU-82C
572°F radius of ø0.005 R25 572°F (300°C)
(300°C) -40 to 572°F sleeve: 0.39" 10 with sleeve 3.3'
(-40 to +300°C) 0.39" 10 3.54" 90 0.98" 25
(gold wire) 1m
16.54" 420 (Approx. 29 g)
3.54" 90
572°F M4 Heat resistance: FU-83C
-40 to 572°F 572°F (300°C), M4 3.3'
(300°C) (Approx. 23 g) 1m
(-40 to +300°C) 0.69"17 0.39"10
Category Reflective Liquid-level ( MEGA FINE )

0.85" R0.20" FU-95S

16 beam axes
-40 to 158°F 21.6 R5 (Approx. 23 g) Free- 6.6'
(-40 to +70°C) 0.71" 18
cut 2m
Tube-mountable
R0.08" R0.08" R2 FU-95Z

R2 (Approx. 7 g) Free- 6.6'
cut 2m
–
Transparent tube of 0.16" to 1.02" 4 to 26 dia.
0.61"15.4 Heat resistance: FU-95H
Liquid-level
R0.98"
221°F (105°C) 6.6'
R25 Free-
0.79" 20 (Approx. 7 g) cut 2m
16 FU-95Z: -40 to 122°F (-40 to +50°C) R0.39" R0.39" R10 FU-95

6.6'
FU-95: -40 to 158°F (-40 to +70°C) R10 (Approx. 7 g) Free-
FU-95H:-40 to 221°F (-40 to +105°C) cut 2m
Liquid level FU-93Z
R0.02" 2. detection by sensor
Immersion
R0.5 head immersion. PFA- Free- 6.6'

ø0.24" ø6
Liquid (except for milky white liquids) sheathed (Approx. 78g) cut 2m
–
Liquid level FU-93
R0.98" 2. detection by sensor
FU-93Z: -40 to 122°F (-40 to +50°C) R25
head immersion. PFA- Free- 6.6'
FU-93: -40 to 158°F (-40 to +70°C) sheathed (Approx. 78g) cut 2m
2. The minimum bend radius of the PFA-sheathed section is R1.57" R40 mm. The 3.15" 80-mm section from the tip cannot be bent.
Category Reflective Reflective, small beam spot ( MEGA FINE )

ø0.12" ø3 Minute target FU-20
Ultra-small 0.20" ±0.04 5 ±1 with beam spot diameter of 0.004" 0.1 –
R0.98" detection Space
-40 to 158°F R25 saving (ø0.12" ø3 ) 19.69"
beam spot (-40 to +70°C) 0.71" 18 (Approx. 2 g) 50 cm
M6 P=0.75 Beam spot can be FU-10

Adjustable 0.39" to 1.18" 10 to 30 with beam spot diameter of 0.04" to 0.14" 0.9 to 3.5 R0.98" adjusted according
-40 to 158°F – R25 to target size. 6.6'
Free-
beam spot (-40 to +70°C) 1.04 to 1.24" 26.4 to 31.5 (Approx. 5 g) cut 2m
Unit: inch mm
Category Reflective Lens for reflective type ( MEGA FINE )

Applicable Detecting distance 1.
Type Shape Features Model
fiber units MEGA / FINE
FU-35FZ 1.50" 38
1.10" 28
Parallel beam
FU-2303 0.16" 4 mm
beam spot
0.37" FU-35TZ 1.38" 35 diameter
Tip ø0.17" 9.5 0.98" 25 F-3HA
ø4.3 FU-35TG (within the
detecting of
2.56" 65 0 to 0.79" 20)
FU-35FA 1.77" 45
Applicable
Type Shape Spot diameter Features Model
fiber units
FU-24X 0.28" ±0.08" 7 ±2 with beam spot diameter of 0.004" 0.1 2. – 0.28" ±0.08" 7 ±2 with beam spot diameter of 0.004" 0.1 2. –
FU-21X 0.28" ±0.08" 7 ±2 with beam spot diameter of 0.008" 0.2 2. 0.28" ±0.08" 7 ±2 with beam spot diameter of 0.008" 0.2 2.
Short-detecting
– –
FU-35FZ
distance
Suitable for
Tip ø0.17" 0.61" 15.6 FU-2303 small targets F-2HA
ø4.3 (Approx. 1 g)
FU-35TZ 0.28" ±0.08" 7 ±2 with beam spot diameter of 0.016" 0.4 3.
FU-35TG
FU-35FA
Long-detecting Medium-detecting
FU-35FZ
Small Beam Spot
FU-2303
distance
0.59" ±0.08" 15 ±2 with beam spot diameter of 0.02" 0.5 Suitable for
Tip ø0.29" FU-35TZ small targets F-4HA
ø7.4 1.06" 27 (Approx. 2 g)
FU-35TG
FU-35FA
FU-21X 1.38" ±0.12" 35 ±3 with beam spot diameter of 0.04" 1.0
FU-35FZ
distance
Long-detecting
distance,
Tip ø0.42" FU-2303 F-6HA
ø10.6 1.02" 26 1.38" ±0.12" 35 ±3 with beam spot diameter of 0.08" 2.0 small beam spot
FU-35TZ (Approx. 5 g)
FU-35FA
FU-21X 0.31" to 1.18" 8 to 30 with beam spot diameter of 0.02" to 0.12" 0.5 to 3.0 4. – 0.31" to 1.18" 8 to 30 with beam spot diameter of 0.02" to 0.12 0.5 to 3.0 4. –
Side-view
FU-35FZ Space-saving,
0.34"
8.7 side-view F-5HA
FU-2303 0.31" to 1.18" 8 to 30 with beam spot diameter of 0.02" to 0.12" 0.5 to 3.0 4. (Approx. 2 g)
Thickness: 0.59"
0.22" 5.6 15 FU-35FA
1. When the FS-V30 is used. Standard target: White matte paper (Reflective type only.)
2. FINE, TURBO, or SUPER must be used.
3. FINE, TURBO, SUPER, or HIGH SPEED must be used.
4. With the FU-35FA/FZ/FG, FINE, TURBO, SUPER, or ULTRA must be used.
17
Category Thrubeam Standard ( MEGA FINE )

Detecting distance Smallest 1. Minimum
M4
55.12" 1400
ø0.0002" R0.08" Hex-Shaped FU-77TZ
-40 to 122°F 9.84" 250 ø0.005 R2 (Approx. 43 g) Free- 6.6'
R0.02" R0.02" R0.5 FU-77V
M4 Free- 6.6'
R0.5
M4 ø0.0002" (Approx. 25 g) cut 2m
66.93"1700
11.81" 300 ø0.005
ToughFlex
0.55" R0.08" R0.08" R2 FU-77

M4
-40 to 122°F 14
Lens: F-1, F-2, F-4, F-5 R2
(Approx. 21 g)
Free- 6.6'
(-40 to +50°C) cut 2m
ø0.12" ø3
66.93"1700 ø0.0002"
R0.08" R0.08" R2 FU-5FZ
-40 to 122°F 11.81" 300 ø0.12" ø3 6.6'
Lens: F-1, F-2, F-4, F-5 ø0.005 R2 Free-
(-40 to +50°C) 0.55" 14 (Approx. 19 g) cut 2m
M6 R0.08" R0.08" R2 FU-71Z
94.49" 2400 ø0.0002" M6
-40 to 122°F 17.72" 450 ø0.005 R2
(Approx. 25 g)
Free- 6.6'
(-40 to +50°C) 0.63" 16 cut 2m
Standard
0.59" 15 ø0.0002" Hex-Shaped FU-77TG

R0.39"
55.12" 1400 ø0.005 Armored
Armored
-40 to 122°F 9.84" 250 R10 3.3'

(gold wire) (Approx. 43 g) 1m
(-40 to +50°C)
M4 R0.39" R0.39" R10 FU-77G
66.93" 1700 ø0.0002" Armored
-40 to 122°F 11.81" 300 ø0.005 R10 3.3'
Lens: F-1, F-2, F-4, F-5 (Approx. 39 g) 1m
(-40 to +50°C) 0.87" 22
M4 Long-detecting FU-7F
90.55" 2300 ø0.0002" R0.98" distance
-40 to 158°F 15.75" 400 ø0.005 R25 M4 (Approx. 21 g)
Free- 6.6'
(-40 to +70°C) 0.59" 15
Lens: F-1, F-2, F-4, F-5 cut 2m
Long-detecting
ø0.12" ø3
90.55" 2300 ø0.0002" R0.98" distance FU-5F
6.6'
Standard
-40 to 158°F 15.75" 400 ø0.005 R25 ø0.12" ø3 Free-

0.59" 15 Lens: F-1, F-2, F-4, F-5 (Approx. 19 g) cut 2m
(-40 to +70°C)
M6 Long-detecting FU-71
102.36" 2600 ø0.0002" R0.98"
21.65" 550 R25
distance Free- 6.6'
-40 to 158°F ø0.005 M6 (Approx. 25 g)
(-40 to +70°C) 0.63" 16
cut 2m
M4
ø0.0002"
R0.16" R0.16" R4 FU-78
39.37" 1000
-40 to 158°F 7.48" 190
Lens: F-1, F-2, F-4, F-5 ø0.005 R4 (Approx. 9 g) Free- 6.6'
(-40 to +70°C) 0.59" 15
cut 2m
Unit: inch mm
Category Thrubeam Flat/Built-in lens, side-view/Top-view ( MEGA FINE )

0.24" 6
ø0.0002" Compact FU-57TZ
Side-
view
0.41" 12.99" 330 R0.08"

-40 to 122°F 2.17" 55 ø0.005 side-view type Free- 3.3'
10.5
Flat head (with mounting hole)
R2
(-40 to +50°C) (gold wire) (Approx. 5 g) cut 1m
R0.08" Ultra-thin, FU-51TZ
0.39" 14.96" 380 ø0.0002" side-view
End-view
-40 to 122°F 10 2.95" 75 ø0.005 R2 Free- 3.3'

(-40 to +50°C) 0.39" 10
(Approx. 5 g) cut 1m
R0.08" Long-detecting FU-52TZ
0.28" 51.18" 1300 ø0.0002" distance, thin,side-
-40 to 122°F 14 9.84" 250 ø0.005 R2 Free- 6.6'
view (Approx. 15 g) cut 2m
(-40 to +50°C) 0.55" 14
0.08" 2
R0.08" Ultra-thin, FU-53TZ
0.28" 9.84" 250 ø0.0002" flat-ON
Top-view
-40 to 122°F 1.97" 50 ø0.005 R2 Free- 3.3'

7 (Approx. 10 g) cut 1m
(-40 to +50°C)
0.16" 4
R0.08" General-purpose, FU-54TZ
51.18" 1300 ø0.0002"
-40 to 122°F 0.28" 9.84" 250 R2 flat view Free- 6.6'
7 ø0.005
(-40 to +50°C) (Approx. 25 g) cut 2m
ø0.16" 125.98" 3200
R0.08" FU-16Z
ø4 Ultra-long-
-40 to 122°F 0.67" 17 24.80" 630 R2 Free- 6.6'
Built-in lens, side-view
detecting cut 2m
(-40 to +50°C)
distance,
ø0.16" 2. R0.39" side-view FU-16
141.73" 3600 2. ø0.004"
-40 to 158°F ø4 0.67" 17 37.40" 950 ø0.1 R10 (Approx. 8 g) Free- 6.6'
(-40 to +70°C) cut 2m
R0.39" Ultra-narrow- FU-18
ø0.16" 125.98" 3200
ø4 0.67" 17 31.50" 800 R10
beam, side-view 6.6'
-40 to 158°F Free-
(-40 to +70°C) (Approx. 8 g) cut 2m
0.06"x0.08"x0.79" 33.46" 850 ø0.0008" R0.39" Mapping FU-18M

-40 to 158°F 1.5x2x20 9.45" 240 ø0.02, Free- 6.6'
R10 (Approx. 6 g)
(-40 to +70°C) (opaque target) cut 2m
Built-in
R0.08" Long-distance, FU-50

end-
view
lens,
0.14 x0.16" 3.6x4 141.73" 2.

3600 2.
ø0.004"
-40 to 122°F 90.55" 2300 R2 square-rod head Free- 6.6'
ø0.1
(-40 to +50°C) 0.47" 12 (Approx. 8 g) cut 2m
2. “141.73" 3600 ” is assumed as maximum because the fiber cable has the length of 6.6' 2 m .
Category Thrubeam Area/Thin-sleeve ( MEGA FINE )

Do not 0.79" 20 ø0.05" ø1.2 Area detection fiber
FU-12
Area
bend sleeve: 66.93" 1700 (TURBO mode) R0.08" with a detecting

0.79" 27.56" 700 ø0.01" ø0.3 width of 0.39" 10 6.6'
18 -40 to 122°F
(-40 to +50°C)
20
(FINE mode)
R2
(Approx. 23 g)
Free-
cut 2m
ø0.03" ø0.82 Side-view type
11.81" 300 R0.98" FU-32
ø0.0002"
Side-view
0.59" 15 0.59" 15 1.50" 38 with thin sleeve Free- 3.3'

-40 to 158°F ø0.005 R25
(-40 to +70°C) (Approx. 5 g) cut 1m
Min. bend radius of ø0.05" ø1.2 ø0.12" ø3
sleeve: 0.98" 25 ø0.0002" R0.98" Long-detecting FU-34
2.56" 0.59" 25.20" 640 distance, side-view
-40 to 158°F 65 15 4.92" 125 ø0.005
R25 Free- 6.6'
(-40 to +70°C) (Approx. 17 g) cut 2m
Min. bend radius of ø1.65
sleeve: 0.39" 10 ø0.06" M4 Long-detecting FU-73
Thin-sleeve
90.55" 2300 ø0.0002" R0.98"

15.75" 400 R25 distance with sleeve Free- 6.6'
-40 to 158°F ø0.005
(-40 to +70°C) 2.64" 67 0.59" 15 (Approx. 24 g) cut 2m
Do not bend sleeve: ø0.82
ø0.03" M3 15.75" 400 ø0.0002"
R0.39" Thin sleeve FU-75F
Free- 3.3'
End-view
3.74" 95 ø0.005 R10 (Approx. 10 g)

-40 to 158°F 0.59"150.59"15 cut 1m
(-40 to +70°C)
Min. bend radius of ø0.4
sleeve: 0.39" 10 ø0.016" ø0.12" ø3 6.30" 160 ø0.0002"
R0.39" Thin sleeve FU-76F
-40 to 158°F 1.26" 32 ø0.005 R10 (Approx. 10 g) Free- 6.6'
(-40 to +70°C) 1.77" 45 0.59" 15 cut 2m
ø0.3
Do not bend sleeve:
ø0.012"ø0.10" ø2.5 R0.39" Thin sleeve FU-56
0.98" 25 ø0.0002"
-40 to 158°F 0.20" 5 ø0.005 R10 (Approx. 3 g) 19.69"
(-40 to +70°C) 0.20" 5 0.39" 10 50 cm
Category Thrubeam High-flex/Extra-thin core fiber ( MEGA FINE )

M3
16.69" 500 R0.16" High-flex FU-79
ø0.0002"
M3 -40 to 158°F 4.92" 125 ø0.005
M3 3.3'
Free-
R4
(-40 to +70°C) 0.39" 10 (Approx. 6 g) cut 1m
High-flex
ø0.06"
ø1.5 ø0.0002"
R0.16" High-flex FU-59
ø0.06 16.69" 500 ø0.06" ø1.5
-40 to 158°F 4.92" 125 ø0.005 R4 Free- 3.3'
ø1.5 (-40 to +70°C) 0.39" 10 (Approx. 6 g) cut 1m
0.24" 6
Compact FU-57TE
Side-
ø0.0002" R0.16"
view
0.41" 12.60" 320 side-view type

-40 to 122°F 10.5 1.97" 50 ø0.005 R4 Free- 3.3'
(gold wire) (Approx. 5 g) cut 1m
(-40 to +50°C)
ø0.04" ø1 R0.39" FU-58
ø0.04 5.91" 150 ø0.0002" Ultra thin
Extra-thin
core fiber
-40 to 122°F 1.26" 32 R10 (Approx. 8 g) 19.69"

ø1.0 (-40 to +50°C) 0.24" 6
ø0.005 50 cm
ø0.10" ø2.5 0.98" 25 R0.39" Thin FU-55

ø0.10 ø0.0002"
-40 to 158°F 0.20" 5
R10 (Approx. 3 g) 19.69"
ø2.5 ø0.005 50 cm
(-40 to +70°C) 0.39" 10
Unit: inch mm
Category Thrubeam Heat-resistant/Oil-proof,Chemical proof ( MEGA FINE )

R0.20" R5
M4 R0.20" FU-86Z
212°F 55.12" 1400 Heat resistance:
(100°C) -40 to 212°F 11.81" 300
Lens: F-1, F-2, F-4, F-5 R5 212°F (100°C), Free- 6.6'
(-40 to +100°C) 0.59" 15 ø0.0002" (Approx. 25 g) cut 2m
ø0.005
FU-86
Heat-resistant
M4 Heat resistance:
221°F 90.55" 2300 R0.98"
221°F (105°C),
(105°C) -40 to 221°F 15.75" 400 Lens: F-1, F-2, F-4, F-5 R25 Free- 6.6'
(-40 to +105°C) 0.59" 15 M4 (Approx. 22 g) cut 2m
356°F M4 Heat resistance: FU-88

51.18" 1300 ø0.0002" R0.98" 356°F (180°C),
(180°C) -40 to 356°F 9.84" 250 ø0.005 R25 Free- 6.6'
0.67" 17 M4 (Approx. 36 g) cut 2m
(-40 to +180°C)
572°F M4
R0.98"
Heat resistance: FU-84C
37.40" 950 ø0.0002" 572°F (300°C),
(300°C) -40 to 572°F 7.09" 180 ø0.005 R25 6.6'
Lens: F-2 M4 (Approx. 66 g) 2m
(-40 to +300°C) 0.98" 25
ø0.20" ø5 FEP fiber

FU-92
141.73" 2. 3600 2. ø0.008"
Oil-proof, -40 to 158°F 51.18" 1300 ø0.2 (Approx. 71 g) Free- 6.6'
(-40 to +70°C) (0.87")(22) R1.57"
cut 2m
Chemical R40
proof
ø0.20" FEP fiber, FU-96
ø5 106.30" 2700 ø0.004" side-view type
-40 to 158°F (0.91") 16.93" 430 ø0.1
6.6'
Free-
(-40 to +70°C) (23)
(Approx. 71 g) cut 2m
Category Thrubeam Lens for thrubeam type ( MEGA FINE )

Applicable Detecting distance
Type Shape Features Model
fiber units MEGA / FINE
FU-77TZ
Ultra-long detecting distance,
141.73" 2. 3600 2.
FU-77 125.98" 3200
FU-77V
narrow beam
Greatly
ø0.17"
FU-77TG/ 70.87" 1800 increases F-4
ø4.3 70.87" 1800
77G the detecting Heat
distance. resistance:
0.37" Aperture 158°F
9.5 141.73" 2. 3600 2. angle: 8° (70°C)
FU-7F 141.73" 2. 3600 2.
(Approx. 1 g)
141.73" 2. 3600 2.
FU-78 98.43" 2500
FU-77 19
FU-77TZ 141.73" 2. 3600 2.
FU-77V 74.80" 1900
Long-detecting distance
FU-84C
Greatly
FU-77TG/ 70.87" 1800
ø0.16"
77G 70.87" 1800
increases F-2
ø4 the detecting Heat
distance. resistance:
0.31" 141.73" 2. 3600 2. Aperture 572°F
7.9 FU-78 59.06" 1500 angle: 15° (300°C)
(Approx. 2 g)
FU-7F 141.73" 2. 3600 2.

90.55" 2300
FU-86
141.73" 2. 3600 2.
FU-86Z 78.74" 2000
FU-77 141.73" 2. 3600 2.

90.55" 2300
FU-77V
70.87" 1800
0.37" FU-77G
70.87" 1800
9.3
Narrow- F-5
141.73" 2. 3600 2. beam, Heat
FU-78 90.55" 2300
side-view resistance:
0.66" type 221°F
16.7 (Approx. 10 g) (105°C )
FU-7F 141.73" 2. 3600 2.
141.73" 2. 3600 2.
Side-view
FU-86
141.73" 2. 3600 2.
FU-86Z 98.43" 2500
FU-77/77G 70.87" 1800

15.75" 400
FU-77V
FU-7F 98.43" 2500 Space- F-11.
ø0.16"
19.69" 500 saving, Heat
ø4 FU-86Z side-view resistance:
0.37"
9.5 type 158°F
74.80" 1900 (Approx. 2 g)
FU-86Z 15.75" 400
(70°C)
FU-78 55.12" 1400

11.81" 300
FU-84C
1. When using the F-1 at a temperature of 158°F (70°C) or more, specify the “Heat-resistant F-1”.
2. “141.73" 3600 ” is assumed as maximum because the fiber cable has the length of 6.6' 2 m.
F I B E R U N I T Quick Reference By Model.
Detecting distance 1. [Unit: inch/mm]

Model Type Features
MEGA ULTRA TURBO SUPER TURBO TURBO FINE HIGH SPEED
Small beam spot 0.39" to 1.18" 10 to 30 with beam spot diameter of 0.04" to 0.14" 0.9 to 3.5 0.39" to 1.18" (0.39" to 1.18")
FU-10 Reflective Adjustable beam spot (0.39" to 1.18" 10 to 30 with beam spot diameter of 0.04" to 0.14" 0.9 to 3.5) 10 to 30 (10 to 30)
0.20" to 6.30" (0.20" to 6.30") 0.20" to 6.30" (0.20" to 6.30") 0.20" to 5.91" (0.20" to 5.91") 0.20" to 5.51" (0.20" to 5.12") 0.20" to 4.72" (0.20" to 3.54") 0.20" to 2.76" (0.20" to 2.17")
FU-11 Reflective Area
5 to 160 (5 to 160) 5 to 160 (5 to 160) 5 to 150 (5 to 150) 5 to 140 (5 to 130) 5 to 120 (5 to 90) 5 to 70 (5 to 55)
66.93" (55.12") 55.12" (43.31") 47.24" (37.40") 37.40" (29.53") 27.56" (21.65") 12.60" (7.09")
FU-12 Thrubeam Area
1700 (1400) 1400 (1100) 1200 (950) 950 (750) 700 (550) 320 (180)
Retro- Retro-reflective 0.39" to 18.90" (0.39" to 14.96") 2. 0.39" to 14.96" (0.39" to 11.81") 2. 0.39" to 7.48" (0.39" to 5.91") 2. 0.39" to 4.92" (0.39" to 3.94") 2. 0.39" to 2.36" (0.39" to 1.97) 2.
FU-13 Super small —
Reflective 10 to 480 (10 to 380) 2. 10 to 380 (10 to 300) 2. 10 to 190 (10 to 150) 2. 10 to 125 (10 to 100) 2. 10 to 60 (10 to 50) 2.
Retro- Retro-reflective 3.94" to 125.98" (0.39" to 98.43") 3.94" to 98.43" (0.39" to 78.74") 3.94" to 48.21" (3.94" to 39.37") 3.94" to 37.01" (3.94" to 29.53") 3.94" to 24.80" (3.94" to 19.69") 3.94" to 19.69" (3.94" to 15.75")
FU-15
Reflective Long-detecting distance 100 to 3200 (100 to 2500) 100 to 2500 (100 to 2000) 100 to 1250 (100 to 1000) 100 to 940 (100 to 750) 100 to 630 (100 to 500) 100 to 500 (100 to 400)
Built-in lens, 141.73" (141.73") 3. 141.73" 3. (118.11") 78.74" (59.06") 59.06" (47.2") 37.40" (29.53") 19.59" (11.02")
FU-16 Thrubeam 3600 (3600) 3. 3600 3. (3000) 2000 (1500) 1500 (1200) 950 (750) 500 (280)
side-view
Built-in lens, 125.98" (98.43") 98.43" (78.74") 51.18" (39.37") 39.37" (31.50") 24.80" (19.69") 14.96" (8.66")
FU-16Z Thrubeam
side-view 3200 (2500) 2500 (2000) 1300 (1000) 1000 (800) 630 (500) 380 (220)
Built-in lens, 125.98" (98.43") 98.43" (78.74") 59.06 (47.24") 47.24" (39.37") 31.50" (25.59") 18.90" (10.24")
FU-18 Thrubeam side-view 3200 (2500) 2500 (2000) 1500 (1200) 1200 (1000) 800 (650) 480 (260)
Built-in lens, 33.46" (31.50") 27.56" (25.59") 14.17" (12.99") 11.81" (11.02") 9.45" (8.66") 5.12" (4.33")
FU-18M Thrubeam
side-view 850 (800) 700 (650) 360 (330) 300 (280) 240 (220) 130 (110)
Small beam spot

FU-20 Reflective 0.20" ±0.04" 5 ±1 with beam spot diameter of 0.004" 0.1 —
ø0.004" ø0.1
Coaxial 3.54" (2.76") 2.76" (2.20") 1.38" (1.10") 0.98" (0.79") 0.59" (0.47") 0.39" (0.28")
FU-21X Reflective
Lens attachment available 90 (70) 70 (56) 35 (28) 25 (20) 15 (12) 10 (7)
Sleeve 1.89" (1.57") 1.65" (1.34") 0.59" (0.47") 0.51" (0.39") 0.39" (0.31") 0.24" (0.16")
FU-22X Reflective
Coaxial, narrow beam 48 (40) 42 (34) 15 (12) 13 (10) 10 (8) 6 (4)
Coaxial 26.77" (21.65") 21.65" (17.32") 14.57" (11.81") 9.84" (7.87") 4.92" (3.94") 3.35" (2.36")
FU-23X Reflective High power 680 (550) 550 (440) 370 (300) 250 (200) 125 (100) 85 (60)
Coaxial 7.87" (6.30") 6.30" (5.12") 3.15" (2.56") 2.36" (1.77") 1.26" (0.98") 0.87" (0.67")
FU-2303 Reflective
200 (160) 160 (130) 80 (65) 60 (45) 32 (25) 22 (17)
Coaxial 2.17" (1.77") 1.77" (1.42") 0.87" (0.71") 0.59" (0.47") 0.31" (0.28") 0.24" (0.16")
FU-24X Reflective Lens attachment available 55 (45) 45 (36) 22 (18) 15 (12) 8 (7) 6 (4)
Coaxial 22.05" (18.50") 20.47" (16.93") 11.81" (9.45") 7.87" (6.30") 3.94" (3.15") 2.76" (1.97")
FU-25 Reflective High power 560 (470) 520 (430) 300 (240) 200 (160) 100 (80) 70 (50)
Sleeve 3.35" (2.68") 2.68" (2.13") 1.34" (1.06") 0.98" (0.79") 0.67" (0.51") 0.43" (0.31")
FU-31 Reflective
Side-view 85 (68) 68 (54) 34 (27) 25 (20) 17 (13) 11 (8)
Sleeve 11.81" (9.06") 9.06" (7.09") 3.94" (2.95") 2.95" (2.36") 1.50" (1.18") 0.98" (0.59")
FU-32 Thrubeam
Side-view 300 (230) 230 (180) 100 (75) 75 (60) 38 (30) 25 (15)
20 Sleeve 7.09" (5.91") 5.91" (4.72") 2.95" (2.36") 1.97" (1.57") 0.98" (0.79") 0.71" (0.55")
FU-33 Reflective
Side-view 180 (150) 150 (120) 75 (60) 50 (40) 25 (20) 18 (14)
Sleeve 25.20" (20.47") 19.69" (15.75") 12.60" (9.84") 9.84" (7.87") 4.92" (3.94") 3.54" (1.97")
FU-34 Thrubeam 640 (520) 500 (400) 320 (250) 250 (200) 125 (100) 90 (50)
Side-view
Coaxial 13.39" (10.63") 10.63" (8.66") 5.51" (4.33") 3.54" (2.76") 1.77" (1.38") 1.18" (0.98")
FU-35FA Reflective
Lens attachment available 340 (270) 270 (220) 140 (110) 90 (70) 45 (35) 30 (25)
Coaxial 7.87" (6.30") 6.30" (5.12") 3.15" (2.56") 2.36" (1.77") 1.26" (0.98") 0.87" (0.67")
FU-35FZ Reflective
200 (160) 160 (130) 80 (65) 60 (45) 32 (25) 22 (17)
Coaxial 7.09" (5.51") 5.51" (4.33") 2.95" (2.36") 2.17" (1.65") 1.18" (0.91") 0.79" (0.63")
FU-35TG Reflective 20 (16)
Lens attachment available 180 (140) 140 (110) 75 (60) 55 (42) 30 (23)
Coaxial 7.09" (5.51") 5.51" (4.33") 2.95" (2.36") 2.17" (1.65") 1.18" (0.91") 0.79" (0.63")
FU-35TZ Reflective
180 (140) 140 (110) 75 (60) 55 (42) 30 (23) 20 (16)
Definite-reflective
FU-37 Reflective 0.12" 3 (center of detecting distance)
Short-detecting distance
Definite-reflective 0.24" 6 (center of detecting distance)
FU-38 Reflective
Short-detecting distance
Definite-reflective 0.10" to 2.56" (0.10" to 2.17") 0.10" to 2.17" (0.10" to 1.73") 0.10" to 1.06" (0.10" to 0.87") 0.10" to 0.87" (0.10" to 0.75") 0.10" to 0.63" (0.10" to 0.47") 0.10" to 0.39" (0.10" to 0.28")
FU-38H Reflective 2.5 to 65 (2.5 to 55) 2 to 55 (2.5 to 44) 2.5 to 27 (2.5 to 22) 2.5 to 22 (2.5 to 19) 2.5 to 16 (2.5 to 12) 2.5 to 10 (2.5 to 7)
Heat-resistant
Definite-reflective 0.10" to 2.56" (0.10" to 2.17") 0.10" to 2.17" (0.10" to 1.73") 0.10" to 1.06" (0.10" to 0.87") 0.10" to 0.87" (0.10" to 0.75") 0.10" to 0.63" (0.10" to 0.47") 0.10" to 0.39" (0.10" to 0.28")
FU-38K Reflective
Heat-resistant 2.5 to 65 (2.5 to 55) 2 to 55 (2.5 to 44) 2.5 to 27 (2.5 to 22) 2.5 to 22 (2.5 to 19) 2.5 to 16 (2.5 to 12) 2.5 to 10 (2.5 to 7)
Definite-reflective 0" to 0.55" (0" to 0.55") 0" to 0.47" (0" to 0.35")
FU-38R Reflective
Long detecting distance 0 to 14 (0 to 14) 0 to 12 (0 to 9)
Definite-reflective 0" to 1.02" (0" to 1.02") 0" to 0.59" (0" to 0.39")

FU-38S Reflective
Long detecting distance 0 to 26 (0 to 26) 0 to 15 (0 to 10)
Definite-reflective 0" to 0.16" (0" to 0.16") 0.08" ±0.06" (0.08" ±0.06")
FU-38V Reflective
Short-detecting distance 0 to 4 (0 to 4) 2 ±1.4 (2 ±1.4)
FU-40 Reflective High-power 30 to 1500 (30 to 1200) 30 to 1100 (30 to 850) 30 to 400 (30 to 320) 30 to 260 (30 to 220) 30 to 150 (30 to 120) 30 to 100 (30 to 80)
FU-40G Reflective High-power 30 to 1500 (30 to 1200) 30 to 1100 (30 to 850) 30 to 400 (30 to 320) 30 to 260 (30 to 220) 30 to 150 (30 to 120) 30 to 100 (30 to 80)
Flat head (with mounting hole) 0.08" to 2.36" (0.08" to 1.97") 0.08" to 1.97" (0.08" to 1.57") 0.08" to 0.98" (0.08" to 0.79") 0.08" to 0.74" (0.08" to 0.63") 0.08" to 0.34" (0.08" to 0.31") 0.08" to 024" (0.08" to 0.16")
FU-41TZ Reflective
Flat-view 2 to 60 (2 to 50) 2 to 50 (2 to 40) 2 to 25 (2 to 20) 2 to 20 (2 to 16) 2 to 10 (2 to 8) 2 to 6 (2 to 4)
Flat head (with mounting hole) 0.04" to 12.60" (0.04" to 9.84") 0.04" to 9.84" (0.04" to 7.87") 0.04" to 4.72" (0.04" to 3.94") 0.04" to 2.95" (0.04" to 2.36") 0.04" to 1.46" (0.04" to 2.36") 0.04" to 1.18" (0.04" to 0.98")
FU-42TZ Reflective
Flat-view 1 to 320 (1 to 250) 1 to 250 (1 to 200) 1 to 120 (1 to 100) 1 to 75 (1 to 60) 1 to 37 (1 to 30) 1 to 30 (1 to 25)
Sleeve 7.04" (5.91") 5.91" (4.72") 3.35" (2.76") 2.36" (1.97") 1.46" (1.18") 0.94" (0.63")
FU-43 Reflective
Top-view 180 (150) 150 (120) 85 (70) 60 (50) 37 (30) 24 (16)
FU-44TZ Flat head (with mounting hole) 0.04" to 3.54" (0.04" to 2.95") 0.04" to 2.95" (0.04" to 2.36") 0.04" to 1.77" (0.04" to 1.46") 0.04" to 1.46" (0.04" to 1.18") 0.04" to 0.98" (0.04" to 0.79") 0.04" to 0.35" (0.04" to 0.24")
Reflective 1 to 90 (1 to 75) 1 to 75 (1 to 60) 1 to 45 (1 to 37) 1 to 37 (1 to 30) 1 to 25 ( to 20) 1 to 9 (1 to 6)
Top-view
Sleeve 1.77" (1.38") 1.38" (1.10") 0.71" (0.55") 0.51" (0.39") 0.31" (0.24") 0.20" (0.16")
FU-45X Reflective
Top-view 45 (35) 35 (28) 18 (14) 13 (10) 8 (6) 5 (4)
Sleeve 0.59" (0.47") 0.49" (0.39") 0.31" (0.28") 0.24" (0.20") 0.12" (0.08") 0.06" (0.04")
FU-46 Reflective 15 (12) 12 (10) 8 (7) 6 (5) 3 (2) 1.6 (1.1)
Top-view
NOTE: Standard target: White matte paper (Reflective type only.).
1. Each detecting distance in parentheses shows the data when the S-APC function is ON. S-APC will be always turned ON when the high-resolution or high-speed mode is selected.
2. When the R-2 (OP-95388) is used, MEGA (0.39" to 37.00" 10 to 940 mm)/ULTRA (0.39" to 29.53" 10 to 750 mm)/SURER (0.39" to 14.96" 10 to 380 mm)/TURBO (0.39" to 9.84" 10 to 250 mm)/FINE (0.39" to 4.92" 10 to 125 mm)
Model Type Features
Flat head (with mounting hole) 0.04" to 3.54" (0.04" to 2.95") 0.04" to 2.95" (0.04" to 2.36") 0.04" to 1.77" (0.04" to 1.46") 0.04" to 1.46" (0.04" to 1.18") 0.04" to 0.98" (0.04" to 0.79") 0.04" to 0.47" (0.04" to 0.31")
FU-47TZ Reflective
Side-view 1 to 90 (1 to 75) 1 to 75 (1 to 60) 1 to 45 (1 to 37) 1 to 37 (1 to 30) 1 to 25 (1 to 20) 1 to 12 (1 to 8)
High-Flex 6.30" (5.12") 5.12" (4.33") 2.76" (2.17") 1.97" (1.57") 1.38" (1.10") 0.87" (0.67")
FU-48 Reflective
ø0.12" ø3 160 (130) 130 (110) 70 (55) 50 (40) 35 (28) 22 (17)
High-Flex 2.95" (2.36") 2.36" (1.97") 1.26" (0.98") 0.98" (0.79") 0.79" (0.63") 0.51" (0.39")
FU-49X Reflective
ø0.06" ø1.5 75 (60) 60 (50) 32 (25) 25 (20) 20 (16) 13 (10)
27.56" (20.87") 20.47" (16.93") 13.78" (9.84") 9.06" (7.09") 4.92" (3.94") 3.15" (2.17")
FU-4F Reflective Standard
700 (530) 520 (430) 350 (250) 230 (180) 125 (100) 80 (55)
Standard 15.75" (12.60") 12.60" (10.24") 6.30" (5.12") 4.72" (3.54") 2.36" (1.77") 1.57" (1.18")
FU-4FZ Reflective
400 (320) 320 (260) 160 (130) 120 (90) 60 (45) 40 (30)
Unbreakable
Built-in lens, 141.73" (141.73") 2. 141.73" (141.73") 2. 141.73" (141.73") 2.
141.73" 2. (125.98") 90.55" (70.87") 59.06" (33.46")
FU-50 Thrubeam
Top-view 3600 (3600) 2. 3600 (3600) 2. 3600 (3600) 2. 3600 2. (3200) 2300 (1800) 1500 (850)
Flat head (with mounting hole) 14.96" (11.02") 11.81" (9.06") 7.09" (5.91") 5.91" (4.72") 2.95" (2.36") 1.77" (0.98")
FU-51TZ Thrubeam
Top-view 380 (280) 300 (230) 180 (150) 150 (120) 75 (60) 45 (25)
FU-52TZ Thrubeam
Top-view 1300 (1000) 1100 (850) 620 (500) 500 (400) 250 (200) 160 (100)
Flat head (with mounting hole) 9.84" (7.87" ) 7.87" (5.91") 5.12" (3.94") 3.94" (3.15") 1.97" (1.57") 1.57" (0.98")
FU-53TZ Thrubeam
Flat-view 250 (200) 200 (150) 130 (100) 100 (80) 50 (40) 40 (25)
FU-54TZ Thrubeam
Flat-view 1300 (1000) 1100 (850) 620 (500) 500 (400) 250 (200) 160 (100)
Extra-thin core fiber 0.98" (0.79" ) 0.79" (0.63") 0.59" (0.39" ) 0.39" (0.28") 0.20" (0.16")
FU-55 Thrubeam —
ø0.10" ø2.5 25 (20) 20 (16) 15 (10) 10 (7) 5 (4)
Sleeve 0.98" (0.79") 0.79" (0.63") 0.59" (0.39") 0.39" (0.28") 0.20" (0.16")
FU-56 Thrubeam —
Top-view 25 (20) 20 (16) 15 (10) 10 (7) 5 (4)
High-Flex 12.60" (9.84") 9.84" (7.87") 5.51" (4.33") 3.94" (3.15") 1.97" (1.57") 1.18" (0.79")
FU-57TE Thrubeam Side-view 320 (250) 250 (200) 140 (110) 100 (80) 50 (40) 30 (20)
FU-57TZ Thrubeam 330 (250) 250 (200) 150 (120) 110 (90) 55 (45) 35 (25)
Side-view
Extra-thin core fiber 5.91" (4.72") 5.12" (3.94") 2.56" (1.97") 1.97" (1.57") 1.26" (0.98") 0.79" (0.47")
FU-58 Thrubeam 130 (100) 65 (50) 50 (40) 32 (25) 20 (12)
ø0.04" ø1.0 150 (120)
High-Flex 19.69" (14.96") 16.54" (12.99") 10.63" (7.87") 8.66" (6.69") 4.92" (3.94") 2.76" (1.38")
FU-59 Thrubeam
ø0.06" ø1.5 500 (380) 420 (330) 270 (200) 220 (170) 125 (100) 70 (35)
90.55" (55.12") 62.99" (43.31") 39.40" (31.50") 31.50" (23.62") 15.75" (12.60") 8.66" (5.91")
FU-5F Thrubeam Standard
2300 (1400) 1600 (1100) 950 (800) 800 (600) 400 (320) 220 (150)
Standard 66.93" (51.18") 51.18" (43.31") 29.53" (23.62") 23.62" (18.11") 11.81" (9.06") 7.87" (5.51")
FU-5FZ Thrubeam
Unbreakable 1700 (1300) 1300 (1100) 750 (600) 600 (460) 300 (230) 200 (140)
21
37.40" (30.71") 35.43" (28.35") 19.69" (15.75") 14.17" (11.02") 7.87" (5.91") 4.72" (3.15")
FU-61 Reflective Standard
900 (720) 500 (400) 360 (280) 200 (150) 120 (80)
950 (780)
Standard 26.77" (21.65") 21.65" (17.72") 14.57" (11.02") 9.84" (7.87") 4.92" (3.94") 3.15" (2.36")
FU-61Z Reflective
Unbreakable 680 (550) 550 (450) 370 (280) 250 (200) 125 (100) 80 (60)
Sleeve 7.09" (5.91") 5.91" (4.72") 3.35" (2.76") 2.36" (1.97") 1.46" (1.18") 0.94" (0.63")
FU-63 Reflective
Top-view 150 (120) 85 (70) 60 (50) 37 (30) 24 (16)
180 (150)
Sleeve 7.09" (5.91") 5.91" (4.72") 3.35" (2.76") 2.36" (1.97") 1.46" (1.18") 0.94" (0.63")
FU-63T Reflective
Top-view 180 (150) 150 (120) 85 (70) 60 (50) 37 (30) 24 (16)
Sleeve 5.12" (4.33") 4.33" (3.54") 2.17" (1.77") 1.69" (1.38") 0.98" (0.79") 0.51" (0.31")
FU-63Z Reflective
Top-view 130 (110) 110 (90) 55 (45) 43 (35) 25 (20) 13 (8)
Sleeve 1.77" (1.38") 1.38" (1.10") 0.71" (0.55") 0.51" (0.39") 0.31" (0.24") 0.20" (0.16")
FU-65X Reflective 45 (35) 35 (28) 18 (14) 13 (10) 8 (6) 5 (4)
Top-view
27.56" (20.87") 20.47" (16.93") 13.78" (9.84") 9.06" (7.09") 4.92" (3.94") 3.15" (2.17")
FU-66 Reflective Standard
700 (530) 520 (430) 350 (250) 230 (180) 125 (100) 80 (55)
Standard 13.78" (11.02") 11.02" (9.06") 5.91" (4.72") 3.94" (3.15") 1.97" (1.57") 1.38" (1.10")
FU-66TZ Reflective 350 (280) 280 (230) 150 (120) 100 (80) 50 (40) 35 (28)
Unbreakable
Standard 15.75" (12.60") 12.60" (10.24") 6.30" (5.12") 4.72" (3.54") 2.36" (1.77") 1.57" (1.18")
FU-66Z Reflective 400 (320) 320 (260) 160 (130) 120 (90) 60 (45) 40 (30)
Unbreakable
Standard 19.69" (15.75") 12.60" (12.60") 8.66" (7.09") 6.69" (5.12") 3.35" (2.56") 1.97" (1.42")
FU-67 Reflective Unbreakable 500 (400) 400 (320) 220 (180) 170 (130) 85 (65) 50 (36)
Standard 19.69" (15.75") 15.75" (12.60") 8.66" (7.09") 6.69" (5.12") 3.35" (2.56") 1.97" (1.42")
FU-67G Reflective 400 (320) 220 (180) 170 (130) 85 (65) 50 (36)
ToughFlex 500 (400)
Standard 19.69" (15.75") 15.75" (12.60") 7.87" (6.30") 5.91" (4.72") 2.95" (2.36") 1.77" (1.30")
FU-67TG Reflective ToughFlex 500 (400) 400 (320) 200 (160) 150 (120) 75 (60) 45 (33)
Standard 19.69" (15.75") 15.75" (12.60") 7.87" (6.30") 5.91" (4.72") 2.95" (2.36") 1.77" (1.30")
FU-67TZ Reflective
Unbreakable 500 (400) 400 (320) 200 (160) 150 (120) 75 (60) 45 (33)
Standard 19.69" (15.75") 15.75" (12.60") 8.66" (7.09") 6.69" (5.12") 3.35" (2.56") 1.97" (1.42")
FU-67V Reflective Unbreakable 400 (320) 220 (180) 170 (130) 85 (65) 50 (36)
500 (400)
High-Flex 6.30" (5.12") 5.12" (4.33") 2.76" (2.17") 1.97" (1.57") 1.38" (1.10") 0.87" (0.67")
FU-68 Reflective
M4 160 (130) 130 (110) 70 (55) 50 (40) 35 (28) 22 (17)
High-Flex 2.95" (2.36") 2.36" (1.97") 1.26" (0.98") 0.98" (0.79") 0.79" (0.63") 0.51" (0.39")
FU-69X Reflective
M3 75 (60) 60 (50) 32 (25) 25 (20) 20 (16) 13 (10)
27.56" (20.87") 20.47" (16.93") 13.78" (9.84") 9.06" (7.09") 4.92" (3.94") 3.15" (2.17")
FU-6F Reflective Standard
700 (530) 520 (430) 350 (250) 230 (180) 125 (100) 80 (55)
102.36" (74.80") 78.74" (62.99") 53.15" (39.37") 39.37" (33.46") 21.65" (17.72") 12.99" (7.87")
FU-71 Thrubeam Standard
2600 (1900) 2000 (1600) 1350 (1000) 1000 (850) 550 (450) 330 (200)
Standard 94.49" (66.93") 74.80" (51.18") 43.31" (35.43") 35.43" (27.56") 17.72" (13.78") 10.63" (6.30")
FU-71Z Thrubeam
Unbreakable 2400 (1700) 1900 (1300) 1100 (900) 900 (700) 450 (350) 270 (160)
Sleeve 90.55" (55.12") 62.99" (43.31") 37.40" (31.50") 31.50" (23.62") 15.75" (12.60") 8.66" (5.91")
FU-73 Thrubeam
Top-view 2300 (1400) 1600 (1100) 950 (800) 800 (600) 400 (320) 220 (150)
Sleeve 15.75" (11.81") 13.39" (10.24") 7.09" (5.91") 5.91" (4.72") 3.74" (2.95") 1.97" (1.18")
FU-75F Thrubeam
Top-view 400 (300) 340 (260) 180 (150) 150 (120) 95 (75) 50 (30)
NOTE: Standard target: White matte paper (Reflective type only.).
2. “141.73" 3600” is assumed as maximum because the fiber cable has the length of 6.6' 2 m .
Model Type Features
Sleeve 6.30" (5.12") 5.12" (3.94") 2.56" (1.97") 1.97" (1.57") 1.26" (0.98") 0.71" (0.39")
FU-76F Thrubeam
Top-view 160 (130) 130 (100) 65 (50) 50 (40) 32 (25) 18 (10)
Standard 66.93" (51.18") 51.18" (43.31") 29.53" (23.62") 23.62" (18.11") 11.81" (9.06") 7.87" (5.51")
FU-77 Thrubeam
Unbreakable 1700 (1300) 1300 (1100) 750 (600) 600 (460) 300 (230) 200 (140)
Standard 66.93" (51.18") 51.18" (43.31") 29.53" (23.62") 23.62" (18.11") 11.81" (9.06") 7.87" (5.51")
FU-77G Thrubeam
1700 (1300) 1300 (1100) 750 (600) 600 (460) 300 (230) 200 (140)
Tough Flex
Standard 55.12" (43.31") 43.31" (34.65") 25.59" (19.69") 19.69" (15.75") 9.84" (7.87") 6.69" (4.33")
FU-77TG Thrubeam 1400 (1100) 1100 (880) 650 (500) 500 (400) 250 (200) 170 (110)
Tough Flex
Standard 55.12" (43.31") 43.31" (34.65") 25.59" (19.69") 19.69" (15.75") 9.84" (7.87") 6.69" (4.33")
FU-77TZ Thrubeam
1400 (1100) 1100 (880) 650 (500) 500 (400) 250 (200) 170 (110)
Unbreakable
Standard 66.93" (51.18") 51.18" (43.31") 29.53" (23.62") 23.62" (18.11") 11.81" (9.06") 7.87" (5.51")
FU-77V Thrubeam
Unbreakable 1700 (1300) 1300 (1100) 750 (600) 600 (460) 300 (230) 200 (140)
39.37" (29.53") 31.50" (23.62") 18.11" (14.57") 14.57" (11.81") 7.48" (5.91") 5.12" (2.95")
FU-78 Thrubeam Standard
1000 (750) 800 (600) 460 (370) 370 (300) 190 (150) 130 (75)
High-Flex 19.69" (14.96") 16.54" (12.99") 10.63" (7.87") 8.66" (6.69") 4.92" (3.94") 2.76" (1.38")
FU-79 Thrubeam
M3 500 (380) 420 (330) 270 (200) 220 (170) 125 (100) 70 (35)
90.55" (55.12") 62.99" (43.31") 37.40" (31.50") 31.50" (23.62") 15.75" (12.60") 8.66" (5.91")
FU-7F Thrubeam Standard 2300 (1400) 1600 (1100) 950 (800) 800 (600) 400 (320) 220 (150)
Heat-resistant 15.75" (14.17") 14.17" (11.02") 8.27" (6.69") 5.91" (4.72") 2.95" (2.36") 1.77" (1.38")
FU-81C Reflective
662°F (350°C) 400 (360) 360 (280) 210 (170) 150 (120) 75 (60) 45 (35)
Heat-resistant 16.54" (13.39") 16.54" (13.39") 10.24" (8.27") 7.09" (5.51") 3.54" (2.76") 2.17" (1.77")
FU-82C Reflective
572°F (300°C) 420 (340) 420 (340) 260 (210) 180 (140) 90 (70) 55 (45)
Heat-resistant 16.54" (13.39") 16.54" (13.39") 10.24" (8.27") 7.09" (5.51") 3.54" (2.76") 2.17" (1.77")
FU-83C Reflective
572°F (300°C) 420 (340) 420 (340) 260 (210) 180 (140) 90 (70) 55 (45)
Heat-resistant 37.40" (29.53") 29.53" (23.62") 18.11" (14.96") 14.96" (11.81") 7.09" (5.91") 5.12" (2.95")
FU-84C Thrubeam
572°F (300°C) 950 (750) 750 (600) 460 (380) 380 (300) 180 (150) 130 (75)
Heat-resistant 26.77" (22.05") 22.05" (17.72") 14.57" (11.81") 9.84" (7.87") 4.72" (3.94") 3.15" (2.36")
FU-85 Reflective
221°F (105°C) 680 (560) 560 (450) 370 (300) 250 (200) 120 (100) 80 (60)
Heat-resistant 18.11" (14.96") 14.96" (11.81") 8.66" (7.09") 6.30" (5.12") 3.15" (2.56") 1.97" (1.57")
FU-85Z Reflective
212°F (100°C) 460 (380) 380 (300) 220 (180) 160 (130) 80 (65) 50 (40)
Heat-resistant 90.55" (55.12") 62.99" (43.31") 37.40" (31.50") 31.50" (23.62") 15.75" (12.60") 8.66" (5.91")
FU-86 Thrubeam 221°F (105°C) 2300 (1400) 1600 (1100) 950 (800) 800 (600) 400 (320) 220 (150)
Heat-resistant 55.12" (43.31") 43.31" (34.46") 31.50" (23.62") 21.65" (17.31") 11.81" (9.84") 7.48" (4.33")
FU-86Z Thrubeam 212°F (100°C) 1400 (1100) 1100 (850) 800 (600) 550 (440) 300 (250) 190 (110)
Heat-resistant 22.44" (18.11") 18.11" (14.17") 10.24" (8.27") 7.09" (5.51") 3.54" (2.76") 2.17" (1.77")
FU-87 Reflective 356°F (180°C) 570 (460) 460 (360) 260 (210) 180 (140) 90 (70) 55 (45)
22 Heat-resistant 51.18" (39.37") 39.37" (31.50") 24.41" (19.69") 19.69" (15.75") 9.84" (7.87") 7.09" (4.33")
FU-88 Thrubeam 356°F (180°C) 1300 (1000) 1000 (800) 620 (500) 500 (400) 250 (200) 180 (110)
Oil-proof, 8.66" (7.09") 8.66" (7.09") 5.31" (4.33") 4.33" (3.35") 2.95" (2.36") 1.77" (1.38")
FU-91 Reflective Chemical proof 220 (180) 220 (180) 135 (110) 110 (85) 75 (60) 45 (35)
Oil-proof, 141.73" (141.73") 2. 141.73" (141.73") 2. 118.11" (94.49") 102.36" (78.74") 51.18" (39.37") 29.53" (15.75")
FU-92 Thrubeam
Chemical proof 3600 (3600) 2. 3600 (3600) 2. 3000 (2400) 2600 (2000) 1300 (1000) 750 (400)
Liquid-level
FU-93 Reflective Liquid (except for milky white liquids) —
Immersion
Liquid-level
FU-93Z Reflective Liquid (except for milky white liquids) —
Immersion
Liquid-level
FU-95 Reflective Transparent tube of 0.16" to 1.02" 4 to 26 dia. —
Tube-mountable
Liquid-level
FU-95H Reflective Transparent tube of 0.16" to 1.02" 4 to 26 dia. —
Tube-mountable
Liquid-level
FU-95S Reflective Tube-mountable Transparent tube of 0.16" to 1.02" 4 to 26 dia. —
Liquid-level
FU-95Z Reflective Transparent tube of 0.16" to 1.02" 4 to 26 dia. —
Tube-mountable
Oil-proof, 106.30" (86.61") 86.61" (66.93") 43.31" (34.65") 34.65" (27.56") 16.93" (13.78") 9.45" (6.30")
FU-96 Thrubeam Chemical proof 2700 (2200) 2200 (1700) 1100 (880) 880 (700) 430 (350) 240 (160)
NOTE: Standard target: White matte paper (Reflective type only).
2. “141.73" 3600” is assumed as maximum because the fiber cable has the length of 6.6' 2 m .
F S - V 3 0 Specifications & Dimensions
Input/Output Circuits
Cable type
Output circuit Input circuit
FS-V31/V32/V31M FS-V33/V34 FS-V33/V34
Brown1. Brown*
12 to 24 VDC 12 to 24 VDC 3.3 VDC
Photoelectric sensor
Monitor output (1 to 5 V) 2.
protection
protection circuit
Black/white
main circuit
Pink (Exteranl
circuit
Orange
main circuit
main circuit
Overcurrent
Device with a 10 kΩ Load 5 to 40 VDC calibration input)
Overcurrent
100 mA max. or higher input impedance

protection
Black: Control output 1

circuit
Load 5 to 40 VDC White: Control output 2 PLC etc.

Black (short-circuits current:
(Control output) 1 mA max.) Blue*
Blue*
0V 0V 0V
Blue1.
1. FS-V31/31M only. 2. FS-V31M only. * FS-V33 only. 1. FS-V33 only.
FS-V31P/V32P FS-V33P/V34P FS-V33P/V34P

Brown*
12 to 24 VDC 12 to 24 VDC Brown* 12 to 24 VDC
Brown1.
protection circuit
protection circuit
Black: Control output 1

main circuit
main circuit
Overcurrent
Overcurrent
main circuit
100 mA max. White: Control output 2 PLC etc.
Black
Load
(Control Black/White
output) Load Pink (Exteranl
Blue1. (short-circuits calibration input)
0V 0V current:
Blue* 2 mA max.)
1. FS-V31P only. * FS-V33P only. 1. FS-V33P only.
2 4
Connector type Pin arrangement
1 3 for sensor
Output circuit Input circuit
FS-V31C/V32C FS-V33C/V34C FS-V31C/32C
* *
12 to 24 VDC 12 to 24 VDC 3.3 VDC
protection circuit
protection circuit
main circuit
Overcurrent
main circuit
(Exteranl
main circuit
Overcurrent
Load 5 to 40 VDC Load 5 to 40 VDC

calibration input)
: Control output 1
: Control output 2 (short-circuits current: PLC etc.
* * 1 mA max.)
0V 0V 0V
* FS-V31C only. * FS-V33C only.
FS-V31CP/V32CP FS-V33CP/V34CP FS-V31CP/V32CP

* *
12 to 24 VDC 12 to 24 VDC 12 to 24 VDC
protection circuit
protection circuit
: Control output 1
main circuit
main circuit
Overcurrent
Overcurrent
main circuit
: Control output 2 PLC etc.
Load
/
23
Load (Exteranl
* * (short-circuits calibration input)
0V 0V current:
2 mA max.)
* FS-V31CP only. * FS-V33CP only.
Dimensions
FS-V31/V31P/V33/V33P/V31M Unit: inch mm
(Main unit) ø0.15"ø3.9
3-core x Brown/Blue/Black: 0.34mm2
When the mounting bracket (Optional) OP-73880
Cable length: 6.6' 2 m
is attached:
0.39"
9.8 1.19"
30.3
(Maximum (1.51")
when the cover 0.12" 3 (38.3)
170° (0.63") (16)
is opened) max.
3.94" 100
0.16" 4 1.19" 0.15" 2 x ø0.13 ø3.4

30.3 0.90"
(1.38") 3.8 22.9 Spot facing: ø0.25 ø6.4, d= 0.11" 2.7
(35) 1.01" 1.00"
(0.51") (13) 25.7 25.4
2 x (0.17" x 0.13") (4.4 x 3.4)
Rear of mounting Spot facing: ø0.28 ø7.2, d= 0.13" 3.2
0.26" 6.7
bracket
1.39" 0.81"
35.4 20.7
0.39" 9.8
2.83" 71.8 0.31" 8 min.
FS-V33/V33P: ø0.15" ø3.9, 5-core x Brown/Blue: 0.34 mm2
Black/White/Pink: 0.18 mm2 0.59"
Brown/Blue: 0.34 mm 2 15
FS-V31M: ø0.15" ø3.9, 4-core x
Black/Orange: 0.18 mm2 1.22"
31
When several units
FS-V32/V32P/V34/V34P/V30 are connected: End unit (Optional)
End unit End unit 3.
(Expansion unit) ø0.10" ø2.6 1-core x OP-26751
Black 0.34 mm2 1.
Cable length: 6.6' 2 m
0.24" 6
No. of units L
0.39" 1 0.77" 19.6
9.8 2 1.16" 29.4
3 1.54" 39.2 DIN-rail mounting
(Maximum
4 1.93" 49.0
when the cover
0.12" 3 5 2.31" 58.8
is opened) 6 2.70" 68.6 0.82"
3.94" 100 7 3.09" 78.4 (0.89")20.8
(22.6)
1.19" 8 3.47" 88.2
0.16" 4
30.3 9 3.86" 98.0
(1.38") 10 4.24" 107.8
(35) 11 4.63" 117.6
(0.51") (13) 12 5.02" 127.4 1.39"
13 5.40" 137.2 0.36" 35.4
9.2
0.26" 14 5.79" 147.0 2.12"
6.7 15 6.17" 156.8 53.8
0.81" 1.39"
20.7 35.4 16 6.56" 166.6
L
2.83" 71.8 0.28" 0.24" 0.24"
7 min. 2. 6 6
1. FS-V34/V34P: ø0.15" ø3.9, 3-core x Black/White/Pink: 0.18 mm2
(The FS-V30 does not have connecting cables.) 3. When using expansion units, be sure to use
the end unit. (Optional)
2. FS-V34/V34P: 031" 8 min.
Unit: inch mm
FS-V31C/V31CP/V33C/V33CP (Main unit) When the mounting bracket (Optional) OP-73880

is attached:
0.39" 9.8 ø0.34" ø8.6
(Maximum 1.19"
when the cover 30.3 (1.51")
0.12" 3 170°
is opened) max. (38.3)
3.94" 100 (0.73")(18.5)
0.16"
4 1.19"
30.3
(1.38")
(35) 0.15" 2 x ø0.13 ø3.4
(0.60") (15.2) 0.90"
3.8 22.9 Spot facing: ø0.25 ø6.4, d= 0.11" 2.7
1.01" 1.00"
0.26" 25.7 25.4
6.7 M8 connector
0.81" 1.39"
20.7 35.4 Rear of mounting 2 x (0.17" x 0.13") (4.4 x 3.4)
2.83" 0.37" bracket
71.8 Spot facing: ø0.28 ø7.2, d= 0.13" 3.2
9.5
0.39" 9.8
FS-V32C/V32CP/V34C/V34CP (Expansion unit) 0.59"

15
1.22"
31
0.39" 9.8 ø0.34" ø8.6
(Maximum
when the cover 0.12" 3
is opened)
3.94" 100
0.16"
4 1.19"
(1.38") 30.3
(35)
(0.60")
(15.2)
0.26"
6.7 M8 connector
0.81" 1.39"
20.7 35.4
2.83" 71.8 0.37"
9.5
24
M8 connector cable (Optional)

ø0.15 ø3.7, 4-core x 0.28mm2
ø0.37"
ø9.5
1.05" L feet (m)

26.7 OP-73864 6.6' 2
OP-73865 33' 10
L
When several units End unit (Optional)

are connected:
End unit End unit 1. OP-26751
0.24" 6
DIN-rail mounting
No. of units L
1 0.77" 19.6
2 1.16" 29.4 0.82"
(0.89") 20.8
3 1.54" 39.2 (22.6)
4 1.93" 49.0
5 2.31" 58.8
6 2.70" 68.6
7 3.09" 78.4 0.36" 1.39"
8 3.47" 88.2 9.2 35.4
9 3.86" 98.0 2.12" 53.8
10 4.24" 107.8
11 4.63" 117.6
12 5.02" 127.4
13 5.40" 137.2
14 5.79" 147.0
15 6.17" 156.8
16 6.56" 166.6
L
0.24" 6 0.24" 6
1. When using expansion units, be sure to use
the end unit. (Optional)
Specifications
Type 1-output with cable 1-output + 1-input 2-output + 1-input 2-output with M8 connector Monitor output 0-line
with M8 connector with cable
NPN FS-V31 FS-V32 FS-V31C FS-V32C FS-V33 FS-V34 FS-V33C FS-V34C FS-V31M FS-V30
Model
PNP FS-V31P FS-V32P FS-V31CP FS-V32CP FS-V33P FS-V34P FS-V33CP FS-V34CP — —
Main unit/Expansion unit Main unit Expansion unit Main unit Expansion unit Main unit Expansion unit Main unit Expansion unit Main unit Expansion unit
Control output 1 output 1 output 2 outputs 2 outputs 1 output N/A
Monitor output (1 to 5 V) N/A N/A N/A N/A 1 output N/A
External input N/A 1 input 1 input N/A N/A N/A
Connector — M8 — M8 — —
Light source Red, 4-element LED (Wavelength: 640 nm)
Response time 33 µs (HIGH SPEED)/250 µs (FINE)/500 µs (TURBO)/1 ms (SUPER TURBO)/4 ms (ULTRA TURBO)/16 ms (MEGA TURBO) 193 µs to16.7 ms
Output selection LIGHT-ON/DARK-ON (switch-selectable)
Operation indicator: Red LED/Dual digital monitor: Dual 7-segment display, Preset Value (4-digit green LED indicator) and
Current Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64512; Excess gain: 0P to 999P,
Display indicator Hold function: Possible to display both peak and bottom hold values.selectable from 5 variations
Bar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling display
Light intensity (area detection possible, automatic sensitivity-tracking function provided)/
Detection mode
[Limited light intensity/Count check/Abnormality detection] 1.
OFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay timer/ON-delay timer + One-shot timer, selectable
Timer function Timer duration selectable: 0.1 ms to 9999 ms, Maximum error against the setting value: ±10% max.
Counter function N/A 65,535 max. count N/A
Control NPN NPN open-collector 40 V, 100 mA max.2. (main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max.
output PNP PNP open-collector 30 V, 100 mA max.2. (main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max.
Monitor output Voltage output: 1 to 5 V 3., Load resistance: 10 kΩ min., Repeatability: ±0.5% of F.S., Response time: 1 ms (FS-V31M only)
External input Non-voltage input (contact, solid-state), Input time: 2 ms (ON)/20 ms (OFF) min.
Unit expansion Up to 16 expansion units can be connected (a total of 17 units). Note that the 2-output type should be counted as two units.
Power supply 12 to 24 VDC ±10%, ripple: 10% max. Class 2
Current consumption Normal operation: 990 mW (at 24 V: 42 mA max, at 12 V: 83 mA max.) / Power-saving mode: 820 mW (at 24 V: 34 mA max, at 12 V: 68 mA max.)
Ambient illumination Incandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.
Ambient temperature 14 to 131°F (-10 to 55°C), No condensation 4.
Relative humidity 35 to 85%, No condensation
Vibration 10 to 55 Hz, double amplitude: 0.06" 1.5 mm, 2 hours each in the X, Y and Z axis
Shock 500 m/s2 in X, Y, and Z directions, 3 times respectively
Housing Polycarbonate
25
Size 1.19" 30.3 mm (H) x 0.39" 9.8 mm (W) x 2.83" 71.8 mm (D)
Weight Approx. 80 g Approx. 45 g Approx. 80 g Approx. 45 g Approx. 80 g Approx. 70 g Approx. 22 g Approx. 22 g Approx. 80 g Approx. 25 g
Accessory N/A
1. Only 2-output type.
2. Total current of two outputs should be less than 100 mA.
3. Output range: 1 to 5 V for the display value 0 to 4096 at HIGH SPEED/FINE/TURBO mode.
4. If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less.
1 to 2 Units: 14 to 131°F (-10 to 55°C), 3 to 10 Units: 14 to 122°F (-10 to 50°C), 11 to 16 Units: 14 to 113°F (-10 to 45°C)
Options
Amplifier securing bracket
Type (for main unit) End unit (for expansion unit) M8 connector cable (6.6' 2 m) 1. M8 connector cable (33.0' 10 m) 1.
Model OP-73880 OP-26751 OP-73864 OP-73865
Shape
Note: To use the main unit only, use a DIN-rail or purchase the OP-73880 securing bracket. To add expansion units, use a DIN-rail and purchase the OP-26751 end unit, which should be placed at both ends of the
connected units.
1. To use the FS-V31C(P)/V32C(P)/V33C(P)/V34C(P), purchase the OP-73864 or the OP-73865.
OPTICAL SENSOR LINEUP
SUPER RGB
CZ-H35S
SENSOR
Distance: Beam spot
diameter: ø0.22" ø0.18" ø0.12"
1.57" (40 mm) (ø5.5) (ø4.5) (ø3)
ø0.18" (ø4.5 mm) (Large) (Medium) (Small)
• 4 outputs x 2 ch CZ-H35S CZ-H32

Luster-cancel, Reflective Type Adjustable Spot, Reflective Type
• UV Sensorhead available
Less affected by shape, position, inclination, Adjustable Beam Spot
and surface luster (Patent-pending) Three beam spot sizes can be easily selected
Powerful, RGB Sensor, Transparent Targets, The CZ-H35S maintains accurate detection by adjusting the slide switch, allowing a wide
16 bit Accuracy, Color Differentiation despite changing target conditions. range of targets to be inspected.
LASER SENSOR
(Hi-Power)
LV-H42 Series LV-H300/100 Series

Long Distance Straight-beam, Retro-reflective Wide Area Thrubeam Laser Sensor
• Easy optical axis alignment • Wide Area Thrubeam Laser Sensor
• Detection range up to 275.59" (7,000 mm) • World’s smallest size
• Spot diameter of 0.06" (1.5 mm) at a distance of • Linear area beam (Transmitter)
World‘s Smallest, Long Range, High Accuracy, up to 39.37" (1m) • Light diffusion sheet (Receiver)
Fast Response, Two Digital Displays • High-power mode with 16-bit resolution for high • Easy adjustment of beam axis
accuracy detection
LASER SENSOR
(Compact)
NEW NEW
LV-S61 Series LV-S41/S41L Series
Straight beam, Retro-reflective Laser Reflective Laser
• 1/3 the Volume of Conventional Models • Smallest Diffuse Reflective Red Laser Sensor
• Built in P.R.O. Function • Bright output indicator
World's Smallest, Long Range, High Accuracy, • 0.10" (0.25 mm) Spot Diameter • 0.05" (1.2 mm) Spot Diameter
Fast Response, Two Digital Displays • Side-view model (LV-S41L)
Specifications are subject to change without notice.
CALL TO CONTACT YOUR LOCAL OFFICE

TOLL
FREE 1 - 8 8 8 - 5 3 9 - 3 6 2 3 Fax : 201-930-0099
KEYENCE CORPORATION OF AMERICA
Corporate Office 50 Tice Blvd., Woodcliff Lake, NJ 07677 Phone:201-930-0100 Fax:201-930-0099 E-mail:keyence@keyence.com
■ Regional offices California N.California Illinois Chicago Michigan Grand Rapids North Carolina Charlotte Pennsylvania Philadelphia Virginia Richmond
Los Angeles Indiana Indianapolis Minnesota Minneapolis Ohio Cincinnati Tennessee Nashville Washington Seattle
Florida Tampa Massachusetts Boston Missouri St. Louis Cleveland Knoxville
Georgia Atlanta Michigan Detroit New Jersey New Jersey Oregon Portland Texas Dallas
KEYENCE CANADA INC.

1450 Meyerside Drive, #301, Mississauga, Ontario L5T 2N5 CANADA Phone:905-696-9970 Fax:905-696-8340 E-mail:keyence@keyence.com
KA1-0095
© KEYENCE CORPORATION, 2005 FSV30-KA-C-E 0036-2 000500 Printed in Japan

Fiber Optic Sensors: The New Standard in Simplicity

Uploaded by

Copyright:

Available Formats

Fiber Optic Sensors: The New Standard in Simplicity

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Fiber Optic Sensors: The New Standard in Simplicity

Uploaded by

Copyright:

Available Formats

NEW Digital Fiber Optic Sensor

Fiber Optic Sensors

Digital Fiber Optic Sensors

World's most powerful beam

Stable detection in harsh environments.

0 10,000 20,000 30,000 40,000 50,000 60,000

World's first power booster switch

Set button Manual button

World's first automatic setting value tracking function

Highly stable detection

KEYENCE has developed a special 16-bit CPU for fiber sensors

Powered by the FALCON IV

Dynamic range 64 times higher than Faster More

Automatic sensitivity tracking function [WORLD's BEST]

maintenance free operation over extended periods of time, 2

saving time and money.

Sensitivity is configured Initial setting Change with

The setting value follows

Detecting a thin target using thrubeam type

Bright and clear Power booster switch

Equipped with a Power booster switch

The illustration shows simulated light beams

New Sensor Options

1-output [NEW] 2-output [NEW] Analog output [NEW]

Cable [NEW] Cable [NEW]

M8 connector type is also available.

Preventing operational errors

Threshold value Power modes/

LEVEL 1 Locked Locked Locked

LEVEL 2 Unlocked Locked Locked Can output signals

LEVEL 3 Unlocked Unlocked Locked

* Counter function is available

Highest speed [WORLD's BEST]

Max. 10,000 counts per second

Reliable expansion units

single output wire. 9.8 mm

1 Shock absorber function incorporated

2 Dust cover provided 1

Interference prevention function up to 16 units

Wire saving connection method (when 10 units are used)

Number of wires : 58 Number of wires : 24

Nunber of jumper wires : 8 Nunber of jumper wires : 0

All red wires will be unnecessary

Combination with other sensor models is possible

%Tuning Display scaling

Setting value Current value

Set the value 10% less

Ergonomic button layout Ergonomic Design

Standard main display

Only the main display is active by default.

unwanted display modes by accident, confusing operators.

Useful functions to cope with

Inverted display Power saving

The green indicator is

Harsh environments/Changes over time

S-APC MODE + 4-ELEMENT LED EDGE INSPECTION MODE

Setting value Current value Setting value Current value

FULL AUTOMATIC CALIBRATION

Detecting dropping targets