RESTRAINTS

SUPPLEMENTAL RESTRAINT SYSTEM (SRS)

SECTION SRS B

E
CONTENTS
SERVICE INFORMATION ............................ 2 SRS Configuration .................................................... 6 F
Front Seat Belt Pre-tensioner with Load Limiter ....... 6
DTC INDEX .......................................................... 2 Direct-Connect SRS Component Connectors .......... 6
B1001-B1015 ............................................................ 2 G
B1042-B1057 ............................................................ 2 TROUBLE DIAGNOSIS ..................................... 8
B1058-B1073 ............................................................ 3 SRS Component Parts Location ............................... 8
B1074-B1089 ............................................................ 3 Wiring Diagram - SRS - ............................................ 9
Trouble Diagnosis with CONSULT-III ......................16 SRS
B1202-B1209 ............................................................ 3
Trouble Diagnosis: "AIR BAG" Warning Lamp
PRECAUTIONS ................................................... 4 Does Not Turn OFF .................................................18
Precaution for Supplemental Restraint System Trouble Diagnosis: "AIR BAG" Warning Lamp I
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN- Does Not Turn ON ...................................................19
SIONER" ................................................................... 4
Precaution for SRS "AIR BAG" and "SEAT BELT DRIVER AIR BAG MODULE ............................ 20
Componets ..............................................................20 J
PRE-TENSIONER" Service ...................................... 4

PREPARATION ................................................... 5 SPIRAL CABLE ................................................ 22

Special Service Tool ................................................. 5 Component ..............................................................22 K
Commercial Service Tool .......................................... 5
FRONT PASSENGER AIR BAG MODULE ...... 24
SUPPLEMENTAL RESTRAINT SYSTEM Removal and Installation .........................................24
L
(SRS) ................................................................... 6

Revision: 2007 September SRS-1 D40

 DTC INDEX
< SERVICE INFORMATION >
SERVICE INFORMATION
DTC INDEX
B1001-B1015 INFOID:0000000003333709

DTC Items (CONSULT screen terms) Reference

B1001
B1002
B1003
B1004
B1005
B1006
B1007
B1008 CONTROL UNIT SRS-16, "Trouble Diagnosis with CONSULT-III"
B1009
B1010
B1011
B1012
B1013
B1014
B1015

B1042-B1057 INFOID:0000000003333710

DTC Items (CONSULT screen terms) Reference

B1042
B1043
B1044
CONTROL UNIT SRS-16, "Trouble Diagnosis with CONSULT-III"
B1045
B1046
B1047
B1049
B1050
B1051
B1052 DRIVER AIR BAG MODULE
SRS-16, "Trouble Diagnosis with CONSULT-III"
B1054
B1055
B1056
B1057

Revision: 2007 September SRS-2 D40

 DTC INDEX
< SERVICE INFORMATION >
B1058-B1073 INFOID:0000000003333711

DTC Items (CONSULT screen terms) Reference

B1058 B
B1059
B1060
CONTROL UNIT SRS-16, "Trouble Diagnosis with CONSULT-III" C
B1061
B1062
B1063 D
B1065
B1066
E
B1067
B1068
ASSIST A/B MODULE SRS-16, "Trouble Diagnosis with CONSULT-III"
B1070 F
B1071
B1072
B1073 G

B1074-B1089 INFOID:0000000003333712

SRS
DTC Items (CONSULT screen terms) Reference
B1074
I
B1075
B1076
CONTROL UNIT SRS-16, "Trouble Diagnosis with CONSULT-III"
B1077 J
B1078
B1079
K
B1081
B1082
PRE-TEN FRONT RH SRS-16, "Trouble Diagnosis with CONSULT-III"
B1083 L
B1084
B1086
M
B1087
PRE-TEN FRONT LH SRS-16, "Trouble Diagnosis with CONSULT-III"
B1088
B1089 N
B1202-B1209 INFOID:0000000003333713

O
DTC Items (CONSULT screen terms) Reference
B1202
B1203
P

B1204
CONTROL UNIT SRS-16, "Trouble Diagnosis with CONSULT-III"
B1205
B1206
B1207
B1209 FRONTAL COLLISION SRS-16, "Trouble Diagnosis with CONSULT-III"

Revision: 2007 September SRS-3 D40

 PRECAUTIONS
< SERVICE INFORMATION >
PRECAUTIONS
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT
PRE-TENSIONER" INFOID:0000000003333735

The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. Information necessary to service the system safely is included in the “SUPPLEMENTAL
RESTRAINT SYSTEM” and “SEAT BELTS” of this Service Manual.
WARNING:
• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in
the event of a collision which would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.
• Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal
injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag
Module, see the “SUPPLEMENTAL RESTRAINT SYSTEM”.
• Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or har-
ness connectors.
Precaution for SRS "AIR BAG" and "SEAT BELT PRE-TENSIONER" Service
INFOID:0000000002978819

• Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
• Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 min-
utes.
For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-
tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have
passed.
• Diagnosis sensor unit must always be installed with their arrow marks “⇐” pointing towards the front of the
vehicle for proper operation. Also check diagnosis sensor unit for cracks, deformities or rust before installa-
tion and replace as required.
• The spiral cable must be aligned with the neutral position since its rotations are limited. Do not attempt to
turn steering wheel or column after removal of steering gear.
• Handle air bag module carefully. Always place driver and front passenger air bag modules with the pad side
facing upward and place front side air bag module standing with stud bolt side setting bottom.
• Conduct self-diagnosis to check entire SRS for proper function after replacing any components.
• After air bag inflates, the front instrument panel assembly should be replaced if damaged.
• Always replace instrument panel pad following front passenger air bag deployment.

Revision: 2007 September SRS-4 D40

 PREPARATION
< SERVICE INFORMATION >
PREPARATION
A
Special Service Tool INFOID:0000000002978820

B
Tool number
Description
Tool name

KV99105300
Anchoring air bag module
Air bag module bracket D

S-NT354
E

KV99106400 Disposing of air bag module and front seat

F
Deployment tool belt pre-tensioner

G
S-NT357

SRS
KV99109700
• Connecting between the deployment tool
• Deployment tool adapter for front
and front seat belt pre-tensioner
seat belt pre-tensioner
• Connecting between the deployment tool
• Deployment tool adapter for driver I
and driver air bag module
air bag module

SHIA0038J

KV99108300
Connecting between the deployment tool K
Deployment tool adapters for front
and front passenger air bag module
passenger air bag

ZZA1166D L

Commercial Service Tool INFOID:0000000002978821

Tool name Description

Tamper resistant TORX bit Removal tool of driver air bag module O

S-NT757
P

Revision: 2007 September SRS-5 D40

 SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
< SERVICE INFORMATION >
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
SRS Configuration INFOID:0000000002978822

MHIB0119E

The air bag deploys if the air bag diagnosis sensor unit is activated while the ignition switch is in the ON or
START position.
The collision modes for which supplemental restraint systems are activated are different among the SRS sys-
tems. For example, the driver air bag module, front passenger air bag module and front seat belt pre-tension-
ers are activated in a frontal collision but not in a side collision.
SRS configurations for some collision modes are as follows:

SRS configuration Frontal collision Left side collision Right side collision
Driver air bag module × — —
Front passenger air bag module × — —
Front LH seat belt pre-tensioner × — —
Front RH seat belt pre-tensioner × — —

Front Seat Belt Pre-tensioner with Load Limiter INFOID:0000000002978823

The seat belt pre-tensioner system with load limiter is installed for
both the driver's seat and the front passenger's seat. It operates
simultaneously with the SRS air bag system in the event of a frontal
collision with an impact exceeding a specified level.
When the frontal collision with an impact exceeding a specified level
occurs, seat belt slack resulting from clothing or other factors is
immediately taken up by the pre-tensioner. Vehicle passengers are
securely restrained.
When passengers in a vehicle are thrown forward in a collision and
the restraining force of the seat belt exceeds a specified level, the
load limiter permits the specified extension of the seat belt by the
WHIA0225E
twisting of the ELR shaft, and a relaxation of the chest-area seat belt
web tension while maintaining force.
Direct-Connect SRS Component Connectors INFOID:0000000002978824

The following SRS components use direct-connect style harness connectors.

• Driver air bag module
• Front passenger air bag module
• Front LH seat belt pre-tensioner
• Front RH seat belt pre-tensioner
Always pull up to release black locking tab prior to removing connector from SRS component.

Revision: 2007 September SRS-6 D40

 SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
< SERVICE INFORMATION >
Always push down to lock black locking tab after installing connector
to SRS component. When locked, the black locking tab is level with A
the connector housing.

WHIA0103E

SRS

Revision: 2007 September SRS-7 D40

 TROUBLE DIAGNOSIS
< SERVICE INFORMATION >
TROUBLE DIAGNOSIS
SRS Component Parts Location INFOID:0000000002978825

MHIB0120E

1. Front RH seat belt pre-tensioner 2. Front passenger air bag module 3. Air bag warning lamp
4. Spiral cable 5. Driver air bag module 6. Front LH seat belt pretensioner
7. Air bag diagnosis sensor unit

Revision: 2007 September SRS-8 D40

 TROUBLE DIAGNOSIS
< SERVICE INFORMATION >
Wiring Diagram - SRS - INFOID:0000000002978826

SRS

MHWA0098E
P

Revision: 2007 September SRS-9 D40

 TROUBLE DIAGNOSIS
< SERVICE INFORMATION >

MHWA0099E

Revision: 2007 September SRS-10 D40

 TROUBLE DIAGNOSIS
< SERVICE INFORMATION >

SRS

MHWA0100E

Revision: 2007 September SRS-11 D40

 TROUBLE DIAGNOSIS
< SERVICE INFORMATION >

MHWA0101E

Revision: 2007 September SRS-12 D40

 TROUBLE DIAGNOSIS
< SERVICE INFORMATION >

SRS

MHWA0102E

Revision: 2007 September SRS-13 D40

 TROUBLE DIAGNOSIS
< SERVICE INFORMATION >

MHWA0103E

Revision: 2007 September SRS-14 D40

 TROUBLE DIAGNOSIS
< SERVICE INFORMATION >

SRS

MHWA0105E

Revision: 2007 September SRS-15 D40

 TROUBLE DIAGNOSIS
< SERVICE INFORMATION >

MHWA0106E

Trouble Diagnosis with CONSULT-III INFOID:0000000002978827

DIAGNOSTIC PROCEDURE

Diagnostic mode Description

SELF-DIAG RESULT The self-diagnosis result is Displayed. SELF-DIAG [CURRENT], [PAST], RECORD
ECU DISCRIMINATED No. The parts number of diagnosis sensor units displayed.

Revision: 2007 September SRS-16 D40

 TROUBLE DIAGNOSIS
< SERVICE INFORMATION >

A
Trouble Diadnosis with CONSULT-III. Refer to SRS-16, "Trouble Diagnosis with CONSULT-III".

Repair order
Diagnostic item Explanation B
Recheck SRS at each replacement
When malfunction is • Low battery voltage (Less than 9V) • Charge the battery.
indicated by the “AIR
• Self-diagnostic result “SELF-DIAG
BAG” warning lamp in C
[PAST]” (previously stored in the
User mode.
memory) might not be erased after
NO DTC IS DETECTED —
repair.
• Intermittent malfunction has been D
detected in the past.
• No malfunction is detected. —
CONTROL UNIT • Air bag diagnosis sensor unit is malfunctioning. 1. Visually check the wiring harness E
[B1001-B1015] connection.
[B1042-B1047] 2. Replace the harness if it has visi-
ble damage.
3. Replace the air bag diagnosis F
sensor unit.
DRIVER AIRBAG MODULE • Driver air bag module circuit is open (including the spiral ca- 1. Visually check the wiring harness
[OPEN] ble). connection. G
[B1049] or [B1054] 2. Replace the harness if it has visi-
ble damage.
DRIVER AIRBAG MODULE • Driver air bag module circuit is shorted to some power sup-
3. Replace driver air bag module.
[VB-SHORT] ply circuit (including the spiral cable).
[B1050] or [B1055]
(Before disposal, it must be de- SRS
ployed.)
DRIVER AIRBAG MODULE • Driver air bag module circuit is shorted to ground (including 4. Replace the spiral cable.
[GND-SHORT] the spiral cable). 5. Replace the air bag diagnosis
[B1051] or [B1056] sensor unit. I
6. Replace the related harness.
DRIVER AIRBAG MODULE • Driver air bag module circuits are shorted to each other.
[SHORT]
[B1052] or [B1057] J
CONTROL UNIT • Air bag diagnosis sensor unit is malfunctioning. 1. Visually check the wiring harness
[B1058-B1063] connection.
2. Replace the harness if it has visi-
ble damage.
K
3. Replace the air bag diagnosis
sensor unit.
ASSIST A/B MODULE • Front passenger air bag module circuit is open. 1. Visually check the wiring harness L
[OPEN] connection.
[B1065] or [B1070] 2. Replace the harness if it has visi-
ble damage.
ASSIST A/B MODULE • Front passenger air bag module circuit is shorted to some M
3. Replace front passenger air bag
[VB-SHORT] power supply circuit.
module. (Before disposal, it must
[B1066] or [B1071]
be deployed.)
ASSIST A/B MODULE • Front passenger air bag module circuit is shorted to ground. 4. Replace the air bag diagnosis
N
[GND-SHORT] sensor unit.
[B1067] or [B1072] 5. Replace the related harness.
ASSIST A/B MODULE • Front passenger air bag module circuits are shorted to each
[SHORT] other. O
[B1068] or [B1073]
CONTROL UNIT • Air bag diagnosis sensor unit is malfunctioning. 1. Visually check the wiring harness
[B1074-B1079] connection. P
2. Replace the harness if it has visi-
ble damage.
3. Replace the air bag diagnosis
sensor unit.

Revision: 2007 September SRS-17 D40

 TROUBLE DIAGNOSIS
< SERVICE INFORMATION >
Repair order
Diagnostic item Explanation
Recheck SRS at each replacement
PRE-TEN FRONT LH • The circuit for front LH seat belt pre-tensioner is open. 1. Visually check the wiring harness
[OPEN] connections.
[B1086] 2. Replace the harness if it has visi-
ble damage.
PRE-TEN FRONT LH • The circuit for front LH seat belt pre-tensioner is shorted to
3. Replace front LH seat belt pre-
[VB-SHORT] some power supply circuit.
tensioner.
[B1087]
(Before disposal, it must be de-
PRE-TEN FRONT LH • The circuit for front LH seat belt pre-tensioner is shorted to ployed.)
[GND-SHORT] ground. 4. Replace the air bag diagnosis
[B1088] sensor unit.
5. Replace the related harness.
PRE-TEN FRONT LH • The circuits for the front LH seat belt pre-tensioner are
[SHORT] shorted to each other.
[B1089]
PRE-TEN FRONT RH • The circuit for front RH seat belt pre-tensioner is open. 1. Visually check the wiring harness
[OPEN] connections.
[B1081] 2. Replace the harness if it has visi-
ble damage.
PRE-TEN FRONT RH • The circuit for front RH seat belt pre-tensioner is shorted to
3. Replace front RH seat belt pre-
[VB-SHORT] some power supply circuit.
tensioner.
[B1082]
(Before disposal, it must be de-
PRE-TEN FRONT RH • The circuit for front RH seat belt pre-tensioner is shorted to ployed.)
[GND-SHORT] ground. 4. Replace the air bag diagnosis
[B1083] sensor unit.
5. Replace the related harness.
PRE-TEN FRONT RH • The circuits for the front RH seat belt pre-tensioner are
[SHORT] shorted to each other.
[B1084]
CONTROL UNIT • Air bag diagnosis sensor unit is malfunctioning. 1. Visually check the wiring harness
[B1202-B1207] connection.
2. Replace the harness if it has visi-
ble damage.
3. Replace the air bag diagnosis
sensor unit.
FRONTAL COLLISION • Seat belt pre-tensioner and front air bag deployed. • Replace the SRS component parts.
DETECTION
[B1209]

Trouble Diagnosis: "AIR BAG" Warning Lamp Does Not Turn OFF INFOID:0000000003333759

DIAGNOSTIC PROCEDURE
1.CHECK DEPLOYMENT OF AIR BAG MODULE
Check the air bag module deployed?
Is “AIR BAG MODULE” deployed?
YES >> Replace air bag module.
NO >> GO TO 2.
2.CHECK AIR BAG FUSE
Check the air bag fuse.
Check 10A fuse [No.1, located in fuse block (J/B)] normal?
YES >> GO TO 4.
NO >> GO TO 3.
3.CHECK AIR BAG FUSE AGAIN
Replace air bag fuse and turn ignition switch ON.
Does the “AIR BAG” fuse blow again?
YES >> Repair or replace main harness.
NO >> INSPECTION END

Revision: 2007 September SRS-18 D40

 TROUBLE DIAGNOSIS
< SERVICE INFORMATION >
4.CHECK DIAGNOSIS SENSOR UNIT A
Check the screen of CONSULT-III.
Is “DIAGNOSIS SENSOR UNIT” displayed on CONSULT-III?
YES >> Replace diagnosis sensor unit. B
NO >> GO TO 5.
5.CHECK HARNESS CONNECTION
C
Check the connection of harness connector.
Is harness connection between warning lamp and diagnosis sensor unit normal?
YES >> GO TO 4. D
NO >> Replace wiring harness connector.
Trouble Diagnosis: "AIR BAG" Warning Lamp Does Not Turn ON INFOID:0000000003333760

E
DIAGNOSTIC PROCEDURE
1.CHECK METER FUSE
F
Check the meter fuse.
Check 10A fuse [No.3, located in fuse block (J/B)] normal?
YES >> GO TO 3. G
NO >> GO TO 2.
2.CHECK METER FUSE AGAIN
Replace 10A fuse [No.3, located in fuse block (J/B)] and turn ignition switch ON. SRS
Does the meter fuse blow again?
YES >> Repair or replace the related harness.
NO >> INSPECTION END I

3.CHECK HARNESS CONNECTION BETWEEN DIAGNOSIS SENSOR UNIT AND COMBINATION METER
Disconnect diagnosis sensor unit connector and turn ignition switch ON. J
Does “AIR BAG” warning lamp turn ON?
YES >> Replace diagnosis sensor unit.
NO >> Replace combination meter assembly. K

Revision: 2007 September SRS-19 D40

 DRIVER AIR BAG MODULE
< SERVICE INFORMATION >
DRIVER AIR BAG MODULE
Componets INFOID:0000000002978830

MHIB0099E

1. Steering wheel 2. Retaining clip 3. Driver air bag module connector

4. Driver air bag module 5. Retaining clip access hole 6. Horn connector

Remobal and Installation

REMOVAL
CAUTION:
• Do not attempt to repair or replace damaged direct-connect SRS component connectors. If a driver
air bag direct-connect harness connector is damaged, the spiral cable must be replaced.
• Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least
3 minutes.
• When servicing the SRS, do not work from directly in front of air bag module.

LHIA0085E

CAUTION:
• When servicing the SRS, do not work from directly in front of air bag module.

Revision: 2007 September SRS-20 D40

 DRIVER AIR BAG MODULE
< SERVICE INFORMATION >
• Always place air bag module with pad side facing upward.
• Do not insert any foreign objects (screwdriver, etc.) into air A
bag module or connectors.
• Do not disassemble air bag module.
• Do not expose the air bag module to temperatures exceeding
B
90°C (194°F).

LHIA0086E

D
• Replace the air bag module if it has been dropped or sus-
tained an impact.
• Do not allow oil, grease or water to come in contact with the E
air bag module.

G
SBF814E

INSTALLATION SRS
NOTE:
• If driver air bag module is being replaced due to deployment, spiral cable must also be replaced. Refer to
SRS-22.
• For removal/installation of the direct-connect SRS connectors, refer to SRS-6, "Direct-Connect SRS Compo- I
nent Connectors".
• After the work is completed, perform self-diagnosis to check that no malfunction is detected.
J

Revision: 2007 September SRS-21 D40

 SPIRAL CABLE
< SERVICE INFORMATION >
SPIRAL CABLE
Component INFOID:0000000002978831

MHIB0100E

1. Steering wheel 2. Lighting and turn signal switch 3. Spiral cable

4. Column cover upper 5. Steering column assembly 6. Screw
7. Column cover lower 8. Wiper and washer switch 9. Driver air bag module connector

Removal and Installation

REMOVAL
CAUTION:
• Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least
3 minutes.
• When servicing the SRS, do not work from directly in front of air bag module.
CAUTION:
• Do not disassemble spiral cable.
• Do not apply lubricant to the spiral cable.

LHIA0036E

CAUTION:
With the steering linkage disconnected, the spiral cable may
snap by turning the steering wheel beyond the limited number
of turns. The spiral cable can be turned counterclockwise about
2.5 turns from the right end position.

LHIA0088E

INSTALLATION
NOTE:

Revision: 2007 September SRS-22 D40

 SPIRAL CABLE
< SERVICE INFORMATION >
• Align spiral cable correctly when installing steering wheel, refer to
"INSTALLATION". Make sure that the spiral cable is in the neutral A
position. The neutral position is detected by turning left 2.6 revolu-
tions from the right end position and ending with the locating pin at
the top.
B
• Reset the steering angle sensor calibration after installing spiral
cable.
• After the work is completed, perform self-diagnosis to make sure
no malfunction is detected. C

PHIA0275E

D
CAUTION:
• The spiral cable may snap due to steering operation if the cable is not installed in the correct posi-
tion. E
• With the steering linkage disconnected, the cable may snap by turning the steering wheel beyond
the limited number of turns. The spiral cable can be turned counterclockwise about 2.5 turns from
the right end position.
F

SRS

Revision: 2007 September SRS-23 D40

 FRONT PASSENGER AIR BAG MODULE
< SERVICE INFORMATION >
FRONT PASSENGER AIR BAG MODULE
Removal and Installation INFOID:0000000002978832

NOTE:
The passenger air bag module originally installed in the vehicle uses direct-connect style harness connectors.
Service replacement passenger air bag modules use tab-locking style harness connectors. If the passenger
air bag module is replaced or if the direct-connect harness connectors are damaged, the vehicle wiring har-
ness must be modified to allow connection of the service replacement passenger air bag module.
REMOVAL
CAUTION:
• Do not attempt to repair or replace damaged direct-connect front passenger air bag module connec-
tors. If a direct-connect harness connector is damaged, the front passenger air bag must be
replaced and the wiring harness modified.
• Before servicing SRS, turn the ignition switch off, disconnect both battery cables and wait at least 3
minutes.
• Always work from the side of or under front passenger air bag module.
CAUTION:
• When servicing the SRS, do not work from directly in front of air bag module.
• Always place front passenger air bag module with caution
label side facing upward.
• Do not insert any foreign objects (screwdriver, etc.) into air
bag module or harness connectors.
• Do not disassemble air bag module.

MHIB0101E

• Do not use old nuts after removal; replace with new nuts.
• Do not expose the front passenger air bag module to tempera-
tures exceeding 90°C (194°F).

MHIB0109E

• Replace the air bag module if it has been dropped or sus-

tained an impact.
• Do not allow oil, grease or water to come in contact with the
air bag module.
• For removal/installation of the direct-connect SRS connec-
tors. .

SBF814E

INSTALLATION
Original Passenger Air Bag Module
CAUTION:

Revision: 2007 September SRS-24 D40

 FRONT PASSENGER AIR BAG MODULE
< SERVICE INFORMATION >
• Always work from the side of or under front passenger air bag module.
• After the work is completed, perform self-diagnosis to check that no malfunction is detected. A
Service Replacement Passenger Air Bag Module
CAUTION:
• Always work from the side of or under front passenger air bag module. B
• After the work is completed, perform self-diagnosis to check that no malfunction is detected.
WIRING HARNESS MODIFICATION
NOTE: C
• The passenger air bag module originally installed in the vehicle uses direct-connect style harness connec-
tors. Service replacement passenger air bag modules use tab-locking style harness connectors. If the pas-
senger air bag module is replaced or if the direct-connect harness connectors are damaged, the vehicle D
wiring harness must be modified to allow connection of the service replacement passenger air bag module.
• The wiring harness modification is to be performed only if the vehicle is equipped with the original passenger
air bag which uses direct-connect harness connectors. If the passenger air bag is to be replaced in a vehicle
that has already had the service replacement passenger air bag installed, the wiring harness modification is E
not required.
CAUTION:
• Do not attempt to repair or replace damaged direct-connect front passenger air bag module connec- F
tors. If a direct-connect harness connector is damaged, the front passenger air bag must be
replaced and the wiring harness modified.
• Before servicing SRS, turn the ignition switch off, disconnect both battery cables and wait at least 3
minutes. G
• Always work from the side of or under front passenger air bag module.
• After the work is completed, perform self-diagnosis to check that no malfunction is detected.
SRS

Revision: 2007 September SRS-25 D40