Flyer
Flyer
Flyer
PCS-915ID
Distributed Busbar Relay
• Self diagnostic
• Bus coupler/section protection
• Event recorder including 1024 change-of-binary-input events,
-- Breaker failure protection (50BF)
1024 supervision events and 1024 device logs
It can be supervised by voltage control element. Re-
tripping, bus coupler/bus section tripping and feeder • Disturbance recorder including 32 disturbance records with
tripping are executed in sequence. waveforms (The format is compatible with COMTRADE.)
-- Dead zone protection (50DZ) • Clock synchronization using IRIG-B, SNTP, PPS (Pulse-Per-
It is provided to clear the dead zone faults between CT Second) and PPM (Pulse-Per-Minute)
and breaker.
-- Overcurrent protection (50/51) • One RS-232 or RS-485 rear port for printer
Overcurrent protection consists of phase overcurrent • Language selection – English + selected language
element and ground overcurrent element, each can be
set as inverse-time or definite-time. • Assistant software - PCS-Explorer
Features
• Besides conventional current differential element, the • NR Electric's unique two-out-two hardware design
relay also integrated with NR Electric's innovative DPFC significantly improves relay reliability. The redundant
differential element for fast and sensitive fault clearance. The hardware including two independent data acquisition and
differential protection typical operation time is within 20ms processing circuits, one is fault detector and the other for
after fault. protection tripping. All tripping outputs are supervised by
both circuits to prevent the relay from mal-tripping caused by
• This device provides all-in-one busbar protection solution component error.
with up to 32 bays.
• Programmable hardware and logic are helpful for flexible
• CT ratio compensation is adapted to balance CT ratio operation. Modular and unified hardware, selective function
difference of current samplings. table and configurable I/Os allow users to utilize the relay for
customized applications. Most of the 20 IED indications can
• With patented adaptive-weight anti-saturation algorithm and be defined by software, with 3 color options.
harmonic restrain algorithm, this relay guarantees fast and
reliable performance during CT saturation. • IEC-61850 including IEC-81850-8-1 MMS/GOOSE and
IEC-61850-9-2 Sample Value are supported in the relay.
• Check zone element and discrimination zone element Maximum 6 Ethernet ports are equipped as IEC-61850
coordination make sure the relay can identify and trip the station bus and process bus communication interface.
faulty bus only when there are more than one bus protected
by the relay, so as to minimize outage area.