Moments
Moments
Moments
Please remember to photocopy 4 pages onto one sheet by going A3→A4 and using back to back on the photocopier
Syllabus
OP9 Investigate the law of the lever; recall two everyday applications of levers
Student Notes
A lever is a rigid object which is free to turn about a fixed point called a fulcrum.
The Moment of a force = the force × distance (between the force and the fulcrum).
Example
A force of 75 N is used to turn the spanner in the diagram. If the distance between the force and the nut is 10
cm calculate the moment of the force.
Answer
Moment = Force x distance
= 75N × 0.1 m
=7.5 N m
What would be the effect of using a longer spanner?
Procedure:
1. Hang a metre stick from the 50 cm mark as shown.
2. Attach two weights and adjust their positions until the metre stick balances.
3. Note the position and force of each object.
4. Show mathematically that the force multiplied the distance clockwise equals the force multiplied by the
distance anti-clockwise.
1
Exam Questions
1. [2010 OL]
(i) Which of the following items does not involve a lever?
(ii) Give a reason for your answer.
2. [2007]
Give an everyday example of an application of the lever, using a labelled diagram, showing the fulcrum
and at least one force acting on the lever.
3. [2011 OL]
The diagram shows a spanner and a nut. Complete the sentences below:
(i) The further away from the fulcrum (turning point) you apply a __ the easier it
is to turn a nut.
(ii) The use of a spanner to turn a nut is an everyday example of using a _____ .
4. [2011]
The door handle is an application of a lever.
The labels and arrows show three points.
Which of the points A, B or C represent:
(i) The fulcrum (turning point)
(ii) The point where the smallest force will open the door lock.
5. [2008 OL]
The crowbar in the diagram acts as a lever
and applies a turning force on the boulder
(large rock).
Answer the questions which follow with
reference to the points A, B and C in the
diagram.
(i) Which of the three points, A, B or C, is the
fulcrum (the point about which the turning force acts)?
(ii) At which of the three points, A, B or C, will the least force be needed to move the boulder?
Give a reason for your answer.
8. [2010]
A uniform metre stick, suspended at its mid-point is
balanced as shown.
Calculate force X.
9. [2007]
A metre stick is suspended from its centre of gravity which is at its midpoint.
A force of 3 N acts on the stick at the 90 cm mark and a force of F newtons acts on the stick at the 20 cm
mark. Calculate force F.
2
Exam Solutions
1.
(i) Traffic cone
(ii) It has no fulcrum / no pivotal point / doesn’t rotate about a point.
2.
(i) One example would be a spanner, see diagram
(i) The fulcrum is indicated.
(ii) The force would be applied by hand to the position indicated because the lever is longest at this point.
3.
(i) Force
(ii) Lever
4.
(i) A
(ii) C
5.
(i) C
(ii) A – it it farthest from the fulcrum
6. Moment of a force is equal to the force multiplied by the distance between the force and the fulcrum.
7. When a lever is balanced the clockwise moment (turning effect) equals the anticlockwise moment.
8. 30 × X = 3 × 40
X=4N
9. 30 × F = 40 × 3
F=4N
4. A wrench 30 cm long is used by a mechanic to turn a nut. If the force he exerts on the end is 5 newtons.
Calculate the moment of the force.
5. A boy held a book of weight 50 newtons in his fully outstretched hand, at a distance of 50 cm away.
Calculate the moment of the force.
7. Beyonce weighs 500 N and is sitting at one end of a see-saw which is 4 m long and balanced in the
middle.
Jordan is 2000 N. Where should she sit in order to balance the see-saw?
8. A metre stick is balance in the middle and has a force of 8 N hanging from the 20 cm mark. What force
needs to hang from the 60 cm mark in order to balance the metre stick?
3
Teaching Moments of a force
Syllabus
OP9
Investigate the law of the lever; recall two everyday applications of levers
OP9:
Investigate the law of the lever; recall two everyday applications of levers
1.1 Definitions
It’s not clear from the syllabus, but based on exam questions it would appear that the student is expected to
be familiar with the following definitions:
The moment of a force is equal to the force multiplied by the distance between the force and the
fulcrum.
A Lever is any rigid body which is free to turn about a fixed point called a fulcrum.
Examples of levers: scissors, a door, a wheel-barrow etc
Try to avoid using the word 'moment' until the concept of 'the turning effect of a force' has clicked.
Students should be able to answer all the maths questions on this topic from the textbook and workbook.
Note that the most common mistake by students is to use the number written on the metre stick as the
distance, instead of calculating the distance between that point and the fulcrum.
4
Experiment: To Investigate the Law of the Lever
This is not a mandatory experiment but should be written up as a ‘substitute’ in case a student is absent
for another mandatory experiment.
Students seem genuinely impressed when they get the numbers to work out.
To introduce the experiment there is a demonstration lever with masses in the Resource room.
You may need to revise the concept of Weight being a force, and that Weight = mass (in kg) × 10.
This can be a notoriously inaccurate experiment so I have gone to a little trouble to try and improve
things.
I have left 12 metre sticks in the Resource room, which have been altered such that the centre of gravity is at
the 50 cm mark. I have done this by drilling holes in them, but a quicker (although less permanent) method
would be to use blue-tack.
I have provided a set of nails set into timber holders to ensure the metre stick rotates in one plane only,
rather than hanging it from a thread.
To reduce percentage error, I have left a set of masses in the Resource room which are multiples of 100
grams. Junior cert students can regard each of these to be one Newton (as are the hangers).
To keep the experiment simple I suggest beginning with something like 200g on one side and 400g on
the other.
When hanging the masses, it can prove tricky to read the position of the hanger if it is hung over the
metre-stick directly. It also tends to make the metre-stick turn over. I find it easier use string loops, or
large paper-clips which can slide over the metre stick as required, and the weights hang off of these.
Prepare the students for the fact that the numbers are unlikely to work out exactly in this experiment but
that this is okay and indeed is true for all experiments in science.
Note that the most common mistake by students is to use the number written on the metre stick as
distance, instead of calculating the distance between that point and the 50 cm mark.
You may wish to photocopy the table below, or put something similar on the board.
Run No. 2
Run No. 3
This can now be taken a step further by presenting the class with an unknown weight (e.g. a rubber bung
or a set of keys) and challenging them to come up with its weight.
At the end the keys are weighed and the students who came closest are the winners!
5