Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
45 views

Column Report

This document summarizes the design of a concrete column (Column 12"x12") according to IS 456:2000 standards. The column has a length of 2844.8 mm and is designated as element C2. Material properties, design parameters, axial load and moments are calculated. Reinforcement requirements are determined to be 1253 mm^2 or 1.35% to resist forces of 233.3 kN axial, 14.4 kN-m minor bending and 57.3 kN-m major bending moments. Shear strengths are sufficient to resist design shear forces of 42.1 kN and 18.9 kN. Beam-column capacity ratios are not applicable. Additional moment factors are 1.

Uploaded by

YOGI
Copyright
© © All Rights Reserved
45 views

Column Report

This document summarizes the design of a concrete column (Column 12"x12") according to IS 456:2000 standards. The column has a length of 2844.8 mm and is designated as element C2. Material properties, design parameters, axial load and moments are calculated. Reinforcement requirements are determined to be 1253 mm^2 or 1.35% to resist forces of 233.3 kN axial, 14.4 kN-m minor bending and 57.3 kN-m major bending moments. Shear strengths are sufficient to resist design shear forces of 42.1 kN and 18.9 kN. Beam-column capacity ratios are not applicable. Additional moment factors are 1.

Uploaded by

YOGI
Copyright
© © All Rights Reserved
You are on page 1/ 2

ETABS 2016 16.2.

0 License #*1NFBPTXAJZFEHPH

ETABS 2016 Concrete Frame Design


IS 456:2000 Column Section Design

Column Element Details Type: Ductile Frame (Summary)


Level Element Unique Name Section ID Combo ID Station Loc Length (mm) LLRF
SF C2 6 COLUMN12"X12" DCon7 0 2844.8 0.844

Section Properties
b (mm) h (mm) dc (mm) Cover (Torsion) (mm)
304.8 304.8 56 30

Material Properties
Ec (MPa) fck (MPa) Lt.Wt Factor (Unitless) fy (MPa) fys (MPa)
22360.68 20 1 500 415

Design Code Parameters


ɣC ɣS
1.5 1.15

Axial Force and Biaxial Moment Design For Pu , Mu2 , Mu3


Design Pu Design Mu2 Design Mu3 Minimum M2 Minimum M3 Rebar Area Rebar %
kN kN-m kN-m kN-m kN-m mm² %
233.3007 14.3568 57.2944 4.666 4.666 1253 1.35

Axial Force and Biaxial Moment Factors


K Factor Length Initial Moment Additional Moment Minimum Moment
Unitless mm kN-m kN-m kN-m
Major Bend(M3) 0.704644 2489.2 22.9178 0 4.666
Minor Bend(M2) 0.810234 2489.2 5.7427 0 4.666

Shear Design for Vu2 , Vu3


Shear Vu Shear Vc Shear Vs Shear Vp Rebar Asv /s
kN kN kN kN mm²/m
Major, Vu2 42.0754 60.377 30.3333 42.0754 337.85
Minor, Vu3 18.9704 60.377 30.3333 18.9704 337.85

Joint Shear Check/Design


Joint Shear Shear Shear Shear Joint Shear
Force VTop Vu,Tot Vc Area Ratio
kN kN kN kN cm² Unitless
Major Shear, Vu2 N/A N/A N/A N/A N/A N/A

NEW DESIGN.EDB Page 1 of 2 8/29/2017


ETABS 2016 16.2.0 License #*1NFBPTXAJZFEHPH

Joint Shear Shear Shear Shear Joint Shear


Force VTop Vu,Tot Vc Area Ratio
kN kN kN kN cm² Unitless
Minor Shear, Vu3 N/A N/A N/A N/A N/A N/A

(1.1) Beam/Column Capacity Ratio


Major Ratio Minor Ratio
N/A N/A

Additional Moment Reduction Factor k (IS 39.7.1.1)


Ag Asc Puz Pb Pu k
cm² cm² kN kN kN Unitless
929 12.5 1306.1352 311.2011 233.3007 1

Additional Moment (IS 39.7.1)


Consider Length Section KL/Depth KL/Depth KL/Depth Ma
Ma Factor Depth (mm) Ratio Limit Exceeded Moment (kN-m)
Major Bending (M3 ) Yes 0.875 304.8 5.755 12 No 0
Minor Bending (M2 ) Yes 0.875 304.8 6.617 12 No 0

Notes:

N/A: Not Applicable

N/C: Not Calculated

N/N: Not Needed

NEW DESIGN.EDB Page 2 of 2 8/29/2017

You might also like