Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
55 views

Analysis & Design By: Er. Bishnu Pandey Civil Engineer NEC Regd. No. 8547 "A"

This document provides a disclaimer letter from a consultant regarding structural analysis and design work completed for a proposed building project. The consultant states they will not be responsible for any failures or errors resulting from improper construction or non-implementation of their recommendations. The analysis made assumptions that construction would be properly supervised by skilled workers.

Uploaded by

Khim Khadka
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
55 views

Analysis & Design By: Er. Bishnu Pandey Civil Engineer NEC Regd. No. 8547 "A"

This document provides a disclaimer letter from a consultant regarding structural analysis and design work completed for a proposed building project. The consultant states they will not be responsible for any failures or errors resulting from improper construction or non-implementation of their recommendations. The analysis made assumptions that construction would be properly supervised by skilled workers.

Uploaded by

Khim Khadka
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 5

Analysis & Design By:

Er. Bishnu Pandey


Civil Engineer
NEC Regd. No. 8547 “A”
TO WHOM IT MAY CONCERN

Subject: Issuing Disclaimer letter.

I consultant (M/s. Pandey Engineering Consultancy) going to issue this disclaimer letter on behalf of final
structural analysis and design report for Mrs. Sumitra Thapa during and after construction of proposed
super structure.

The site supervisions and quality test of the different constructions materials of the proposed building do
not undertaken by the consultant. Hence any failure or error occurred with the building due to non-
implementation of the recommendations made in this report and structural drawing or due to improper
construction will not be the responsibility of the consultant/designer.

The structural analysis has been completed on the assumptions that the proposed building shall be
constructed under the proper supervisions of skilled technical manpower.

Er . Bishnu Pandey
Civil Engineer
NEC Reg. No. 8547 “A”
ETABS 2017 Concrete Frame Design
IS 456:2000 Column Section Design
Column Element Details Type: Ductile Frame (Summary)
Level Element Unique Name Section ID Combo ID Station Loc Length (mm) LLRF
Story1 C11 95 Column DCon12 0 3200 0.72

Section Properties
b (mm) h (mm) dc (mm) Cover (Torsion) (mm)
305 305 60 30

Material Properties
Ec (MPa) fck (MPa) Lt.Wt Factor (Unitless) fy (MPa) fys (MPa)
22360.68 20 1 500 500

Design Code Parameters


ɣC ɣS
1.5 1.15

Axial Force and Biaxial Moment Design For Pu , Mu2 , Mu3


Design Pu Design Mu2 Design Mu3 Minimum M2 Minimum M3 Rebar Area Rebar %
kN kN-m kN-m kN-m kN-m mm² %
139.1115 2.7822 -47.5813 2.7822 2.7822 1135 1.22

Axial Force and Biaxial Moment Factors


K Factor Length Initial Moment Additional Moment Minimum Moment
Unitless mm kN-m kN-m kN-m
Major Bend(M3) 0.694332 2844.4 -19.0325 0 2.7822
Minor Bend(M2) 0.739569 2844.4 -1.363 0 2.7822

Shear Design for Vu2 , Vu3


Shear Vu Shear Vc Shear Vs Shear Vp Rebar Asv /s
kN kN kN kN mm²/m
Major, Vu2 46.3898 51.4455 29.8902 46.3898 338.07
Minor, Vu3 25.2869 51.4455 29.8902 25.2869 338.07

Joint Shear Check/Design


Joint Shear Shear Shear Shear Joint Shear
Force VTop Vu,Tot Vc Area Ratio
kN kN kN kN cm² Unitless
Major Shear, Vu2 N/A N/A N/A N/A N/A N/A
Minor Shear, Vu3 N/A N/A N/A N/A N/A N/A

(1.1) Beam/Column Capacity Ratio


Major Ratio Minor Ratio
N/A N/A
ETABS 2017 Concrete Frame Design
IS 456:2000 Beam Section Design

Beam Element Details Type: Ductile Frame (Summary)


Level Element Unique Name Section ID Combo ID Station Loc Length (mm) LLRF
Story1 B18 9 beam DCon10 152.5 3890 1

Section Properties
b (mm) h (mm) bf (mm) ds (mm) dct (mm) dcb (mm)
228.6 355.6 228.6 0 25 25

Material Properties
Ec (MPa) fck (MPa) Lt.Wt Factor (Unitless) fy (MPa) fys (MPa)
22360.68 20 1 500 500

Design Code Parameters


ɣC ɣS
1.5 1.15

Factored Forces and Moments


Factored Factored Factored Factored
Mu3 Tu Vu2 Pu
kN-m kN-m kN kN
-51.6818 0.7327 55.5026 0

Design Moments, Mu3 & Mt


Factored Factored Positive Negative
Moment Mt Moment Moment
kN-m kN-m kN-m kN-m
-51.6818 1.1014 0 -52.7832

Design Moment and Flexural Reinforcement for Moment, M u3 & Tu


Design Design -Moment +Moment Minimum Required
-Moment +Moment Rebar Rebar Rebar Rebar
kN-m kN-m mm² mm² mm² mm²
Top (+2 Axis) -52.7832 429 0 429 174
Bottom (-2 Axis) 0 214 0 0 214

Shear Force and Reinforcement for Shear, Vu2 & Tu


Shear Ve Shear Vc Shear Vs Shear Vp Rebar Asv /s
kN kN kN kN mm²/m
71.238 37.911 38.4551 32.3276 322.33

Torsion Force and Torsion Reinforcement for Torsion, Tu & VU2


Tu Vu Core b1 Core d1 Rebar Asvt /s
kN-m kN mm mm mm²/m
0.7327 55.5026 198.6 325.6 220.34

You might also like