AQUATHERM ENGINEERING CONSULTANTS (INDIA) PVT.

LTD.,

COMPANY PROFILE
EXCELLENCE IN THE FIELD OF ENERGY • POWER • PROCESS
(AN ISO 9001 : 2008 CERTIFIED ORGANIZATION)
 INDEX
 COMPANY DETAILS  PROJECT ENGINEERING
 CORPORATE PROFILE MANAGEMENT
 QUALITY MANAGEMENT SYSTEM  POST CONTRACT SERVICES
CERTIFICATION  KEY OVERSEAS CLIENTS
 ORGANISATION CHART  LIST OF PROJECTS EXECUTED IN
 ENGINEERING MANPOWER VARIOUS POWER PLANTS
STRENGTH  INFRASTRUCTURE FACILITIES
 CORE COMPETANCE  SOFTWARE PACKAGES
 OTHER AREAS OF EXPERTISE  CONTACT DETAILS
 RANGE OF SERVICES
 COMPANY DETAILS
 Aquatherm Engineering Consultants (AEC) two decades old
organization has emerged as a leading engineering consultancy
company in the field of Power, Process and Energy Industries.

 AEC offers Basic Engineering, Detailed engineering, Project

Management, Technology and Procurement services.

 AEC is having a dedicated and well experienced / Engineers /

Technical staff supported by Senior Consultants having more
than 3 decades of engineering expertise in various fields.

 AEC is an ISO certified company. since 2008.

 CORPORATE PROFILE

 Established in 1996

 Multi-Discipline Engineering Consultancy Firm

 Experienced over 25 years in Power Plant

Engineering & Operations

 Professional Management

 Employs Professionals with Lifetime Experience

in the Field of Power & Process
QUALITY MANAGEMENT SYSTEM CERTIFICATION
 BOARD OF DIRECTORS

MECHANICAL CIVIL & STRUCTURAL PROCESS, PIPING &

ENGINEERING ELECTRICAL & INSTRUMENTATION HR & ADMIN
ENGINEERING ENGINEERING SPECIAL PROJECTS

PRINCIPAL ENGINEER
K.A. GANESH PRINCIPAL ENGINEER PRINICIPAL ENGINEER
SYSTEM ADMIN
S. KAMBAN L. PRAKASH

ELECTRICAL INSTRUMENTATION FINANCE &

ENGINEERING ENGINEERING ACCOUNTS
ENGINEERS
HEAD OF DEPARTMENT

SECRETARIAL
HEAD OF STAFF
HEAD OF DEPARTMENT HEAD OF DEPARTMENT
DEPARTMENT
DESIGNERS

FRONT
OFFICE
EXECUTIVE

ENGINEERS ENGINEERS ENGINEERS ENGINEERS CAD DEPARTMENT

OFFICE
ASSISTANTS

DRAUGHTSPERSON DRAUGHTSPERSON DRAUGHTSPERSON DRAUGHTSPERSON

ENGINEERING MANPOWER STRENGTH

CATEGORY STRENGTH
MECHANICAL 28
ELECTRICAL 15
CONTROL & INSTRUMENTATION 7
PIPING 13
PROCESS 2
CIVIL 5
CADD DESIGN 26
FIELD 5

TOTAL 101
 CORE COMPETANCE

POWER PLANTS:
Coal Based Power Plants
Biomass Based Power Plants
Captive Power Plants
Cogeneration Power Plants
Gas Turbine / Combined Cycle Power
Plants

Gas / Diesel Engine Based Power

Plants

Process Plants
Hydro Power Plants
Solar Power Plants
MSW based Power Plants
 OTHER AREAS OF EXPERTISE
PROCESS PLANTS
* CARBON BLACK
* BIO DIESEL
* ACTIVATED CARBON
* CEMENT
* ETHANOL

9
OTHER AREAS OF EXPERTISE

Boiler & HRSG

Firing System

Piping Engineering

Tank & Vessels

Pressure Parts
UTILITY

COAL GAS LIQUID FUEL

• GAS TURBINE • BOILER
• Travelling Grate
• GAS ENGINE • ENGINE
• AFBC
• FBC • GAS TURBINE
• CFBC
• PC Fired

11
 INDUSTRY SEGMENT
WASTE
INDUSTRIAL SUGAR CO- RENEWABLE DETAILED
HEATE STEEL PROCESS GASIFIER
POWER GEN ENGG
RECOVERY

SPONGE IRON SPONGE CARBON

COAL BIOMASS COAL
BLACK
AFBC/CFBC ROLLING
PC
INCIDENTAL
COKE OVEN

BIO-DIESEL
HYDRO BIOMASS PIPING
PRESSURE
GAS CEMENT
VESSEL
CO FIRED BOILER
SUGAR
CALCINATION
SOLAR
FULL
wind
CO-GEN
LIQUIED FUEL
CARBON OIL & GAS
BLACK

12
RENEWABLES - BIOMASS

Biomass

Combustion Pyrolisis

Standard Special Engine

Boiler route
Boiler boiler route

13
 Solar

PV Thermal

Stand
Thin film Crystalline Tracker Hybrid Storage
alone

MONO POLY

14
 HYDRO

SMALL BIG

ROR CANAL DAM 15

 PROCESS

CARBON BIODIESEL SUGAR OIL &

BLACK • PALM • 3500TCD GAS
• HARD • 5000TCD • BROWN
• SOFT FIELD

16
 RANGE OF SERVICES
(Consultancy Projects)
 Feasibility Study
 Preparation of Detailed Project Report
 Project Planning, Scheduling, Monitoring &
Controlling
 Basic (Design) Engineering Services
 Preparation of Tender Document
 Specifications & Drawings
 Evaluation of Vendor Bids
 Assistance in Contract Negotiations & Contract
Document Preparation
 Vendor Drawings Review & Approval (Post Contract)
 Design Development
 RANGE OF SERVICES
(Consultancy Projects)
 Detailed Engineering Services
 Preparation of Construction / Fabrication Drawings
 Inspection / Quality Control
 Shop Inspection
 Project Management Services
 Preparation / Review of As-Built Drawings
 Compilation of O&M Manuals
 Warranty Period Services
 Expedition
 Supervision of Construction, Start-Up, Testing, Pre-
Commissioning & Commissioning Activities
 OTHER SERVICES PROVIDED

Owners Engineer
Lenders Engineer
Detailed Engineering consisting of:
• Mechanical Engineering
• Piping Engineering
• Electrical Engineering
• Instrumentation and Control Engineering
• Civil and Structural Engineering
Post-Contract Services
Supervision at Site
 PROJECT ENGINEERING MANAGEMENT
- MS Project is our computerized network scheduling and
report generation programs.

THE SYSTEM ALLOWS:

- Developing Bar Chart and Logic Networking broken down
to any level of detail.
- Determining the actual progress and forecasting of latest
completion dates.
- Maintaining and updating the database for drawings and
documents
- Monthly Progress Reports including initial preparation and
subsequent updating of project schedule.
 MECHANICAL ENGINEERING

 Heat Balance and Optimization

using State of the Art Software
Packages
 Development and Preparation of
Plot Plan & Equipment Layouts
 System Design and Sizing
Calculations
 Preparation of P&ID’s for Thermal
Cycle & BOP Systems
 Selection/Sizing, Specification
and Bid Evaluation of Mechanical
Equipment Pertaining to Balance
of Plant Scope
 MECHANICAL ENGINEERING
 Development and Preparation of Piping
and Equipment General Arrangements,
Piping Isometrics Showing Support and
Hardware
 Surge/Transient Analysis of Major Fluid
Systems
 Flexibility Analysis of Piping and Code
Compliance Report

 Pipe Support System Design and Detail

Drawings of Hangers/Supports
 Preparation and Updating of Bill of
Material for Piping, Valves, Specialties
and Other Hardware
 Insulation and Painting Schedule
 Plant HVAC and Plumbing
 ELECTRICAL ENGINEERING
 Electrical system design, load flow & short circuit analysis
 Preparation of electrical equipment layout for power
island and switchyard
 Grounding design and details
 Cable sizing, cable schedule and interconnection
engineering for power island and BOP
 Electrical equipment selection & sizing \ preparation of
procurement specification and bid evaluation
 Lighting design and calculation
 Relay setting and coordination
*
 INSTRUMENTATION AND CONTROL
ENGINEERING
 Preparation of Logic
Diagrams and Control Loop
Diagrams for Power Island
Systems and Supporting
Utilities for Analog and
Digital Controls
 Preparation of DCS I/O List
and Detail Instrument List
for the Plant
 Selection, Preparation of
Specification and Bid
Evaluation of DCS, Control
Valves, Measuring Devices,
Process Transmitter and
Switches, CEMS, SWAS, etc.
 INSTRUMENTATION AND CONTROL
ENGINEERING
 Technical Review of all
Subcontract Packages
including Configuration
Drawings for DCS
 Coordination to Interface
GTG, STG, HRSG, Boilers &
BOP Equipment with Plant
DCS
 Preparation of Layout
Drawings for Control
Equipment
 Preparation of Installation,
Cable Schedule, JB
Schedule, etc.
 CIVIL AND STRUCTURAL ENGINEERING

 Analysis of Geo-Technical, Soil Investigation and Site Survey

Data
 Development of Design Criteria for Civil Foundation an d
Over-Ground Structure
 Design and Structural Arrangement of Plant and Buildings
 Site Grading and Development
 Soil Erosion and Sediment Control Plant Development
 Development of Roads, Boundary Wall and Fencing
 Sewage and Drainage System
 Detail Drawings for all Foundations & Superstructure,
Including Piling Equipment Foundation Drawings
 Structural Drawings for Outdoor Structures
 CIVIL AND STRUCTURAL ENGINEERING

 Architectural Rendering

 Doors/Window/Floors/Walls/
Sidings/Roof Painting &
Finishes

 Bill of Materials for

Miscellaneous Hardware

 Steel Fabrication Drawing

Review and Approval

 Review and Approval of Bar

Bending Schedule
 POST-CONTRACT SERVICES

Technical Review of Sub-Contractor’s Package

Field Assistance During Mechanical Erection and
Commissioning

As-Built Drawings and Documents

Shop Inspection, Testing and Quality Assurance
Quality Assurance Services During Erection
Project Schedule Monitoring
 UTILITY GROUP
UTILITY
HEAD

SUPER CRITICAL SUPER CRITICAL

BOILER SPECIALIST TURBINE SPECIALIST

FUEL ASH
WTP CW SYSTEM
HANDLING HANDLING
SPECIALIST SPECIALIST
SPECIALIST SPECIALIST
 STRENGTHS
 Vastly Experienced Senior People from BHEL / TNEB

 Combination of Industrial and Utility Plants Consultancy

Expertise

 Detailed Design Capability

 KEY OVERSEAS CLIENTS

International Free Company, Jordan

Nagarjuna International Vietnam Ltd, Vietnam
Ranhill Engineers & Constructors Sdn Bhd, Malaysia
PEC Konsult Sdn Bhd, Malaysia
Garisan Etika, Malaysia
SMEC Malaysia Sdn Bhd, Malaysia
Wartsila Power Contracting Co. Ltd., Jeddah, Saudi Arabia
Parah International (Star Cement), Dubai
ETA GROUP, EMIRATES
West Kenya Sugar Company Ltd, Cambodia
 KEY OVERSEAS CLIENTS
Olam International, Congo
Digital Power Associates Ltd., Bangladesh
OCN Ritma Sdn Bhd, Malaysia
P T Truba, Indonesia
Kamadhenu Ventures (Cambodia) Ltd.
Min Consult Sdn Bhd, Malaysia
URUK, Dubai
KEY CLIENTS
KEY CLIENTS
 GLOBAL PRESENCE

China
Iran Pakistan
Bangladesh
Jordan Nepal
Iraq Myanmar

USA Algeria

Vietnam
UAE, Saudi
Philippines

Cambodia
Sri Lanka
Uganda
Indonesia
Nigeria Kenya
Gabon
Tanzania
Mauritius
Brazil

Congo
South Africa

35
EMPANELMENT & ACCREDITATION

POWER FINANCE CORPORATION LTD

BANK OF INDIA
SYNDICATE BANK
CRISIL SME RATING
 AQUATHERM ENGINEERING
CONSULTANTS

EXPERIENCED PROJECT TEAM

CORPORATE COMMITMENT
SATISFIED CLIENTELE
REPEAT ORDERS
TRUST
 INFRASTRUCTURE FACILITIES
COMMUNICATION FACILITIES
ADMIN FACILITIES

COMPUTERS WITH AUTOCAD - 101 E-MAIL CONNECTIVITY

A0 SIZE PLOTTER - 1 INTERNET CONNECTIVITY

A3 SIZE PRINTER - 2
A4 SIZE PRINTER - 5
EXCLUSIVE FACSIMILE CONNECTION

20 kVA UPS WITH A BACKUP OF LIBRARY FACILITIES

6 HOURS - 1
In house library consisting of ASME, BS, IS, DIN and ASTM
Standards relevant to boiler, pressure vessels, piping, electrical,
instrumentation etc., Member of British Council and IIT Libraries
A4 SCANNER - 3
MEMBERSHIP
A3 SCANNER - 2  IEEE

LAPTOP - 10  ISA
 INDIAN STANDARDS LIBRARY
 MCC
PHOTOCOPYING MACHINE (A3 SIZE)
 ANNA UNIVERSITY
 INSTITUTION OF ENGINEERS
 SOFTWARE PACKAGES

Windows 2008 R2 STD TALLY 9.2

WINDOWS 8.1

AUTODESK 2015 CAEPIPE

GSTARCAD 8 CAESAR II 5.2
ZWCAD 2011 CADWORX 2015

PACKAGES:
 PRESSURE VESSEL DESIGN PACKAGE
 STEAM POWER PLANT PACKAGE
ETAP 12.5
 HRSG PACKAGE
 E.X. NEXT GENERATION – ACCOUNTS PACKAGE
 PROJECT MANAGEMENT ON MS PROJECT
 In HOUSE PACKAGE FOR PRESSURE DROP, LINE
SIZING, INSULATION SIZING, PIPE THICKNESS
 SOFTWARE PACKAGES
BENTLEY AUTOPLANT P&ID
SOFTWARE
BENTLEY AUTOPLANT DATA
MANAGER
BENTLEY AUTOPLANT EQUIPMENT
BENTLEY AUTOPLANT PIPING WITH BENTLEY STAAD PRO
ISOGEN PRO STRUCTURE
BENTLEY NAVIGATOR
BENTLEY CLASH DETECTION

TEKLA STRUCTURES STEEL MODULE

PRESSURE VESSEL DESIGN AND ANALYSIS

SOFTWARE
 CONTACT DETAILS

#68, (OLD 150) 2ND FLOOR, ST. THOMAS

ADDRESS: BUILDING, LUZ CHURCH ROAD,
MYLAPORE, CHENNAI-600 004. INDIA.

+91-44- 24994032
PHONE: +91-44- 24660462
+91-44- 24660464
FAX: +91-44-24996085
EMAIL: info@aquatherm.in
WEBSITE: www.aquathermindia.com

41
THANK YOU

WWW.AQUATHERMINDIA.COM