IS : 908 - 1975

(Reaffirmed 1995 )

Indian Standard
SPECIFICATION FOR
FIRE HYDRANT, STAND POST TYPE

( Second Revision )

Fourth Reprint JUNE 1998

( Incorporating Amendment No. 1)

UDC 614.843.1

0 Copyright 1977

BUREAU OF INDIAN STANDARDS

MANAK BHAVAN, 9 BAHADUR SHAH ZAFAR MARG
NEW DELHI 110002

Gr 2 September 1975
 IS:908-1975

Indian Standard
SPECIFICATION FOR
FIRE HYDRANT, STAND POST TYPE

( Second Revision )
Fire Fighting Sectional Committee, BDC 22
Chairman Representwag
SHRI P. NI &kHBOTRA Ministry of Home Affiirs
,.’
Members
SHBI G. B. MENON ( Alternate to
Shri P. N. Mehrotra )
DE G. N. BADAMI Central Building Research Institute (CSIR),
Roorkee
SERI GOPAL KRHHAN ( Alternate )
SERI P. R. BALDOTA A.von Services ( Production & Agencies ) Private Ltd,
New Delhi
DE D, S. JAIBWAR ( Alternate)
SHRI P. K. BEARUCEA Insurance Association of India, Bombay
SHRI A. CaaTTEaJI ( Alternate )
SEEI M. B. CHAKANKAR Air Foam Industries, New Delhi
SHRI R. ME~TA ( Alternate )
SEEI S. C. CHATTERJEE West Bengal Fire Services, Calcutta
SHRI D. K. BANERJEE ( Alternate )
Sxsr R. R. DHOBLEY Bhabha Atomic Research Centre, Bombay
DIRECTOR, FIRE SERVICE Home (Police) Department, Government of Andhra
Pradesh
SHRI P. N. GHOSH Ministry of Defence ( R & D )
SHR~ A. N. AHLUW~LIA ( Alternate )
SHRI A. S. KULKARNI Bombay Fire Brigade, Bombay
SHRI R. Ki KULKARNI Steelage Industries Ltd ( Minimax Division ), Bombay
SHRI S. C. DUTTA ( Alternate )
SERI D. K. MAJ~MDER Alien &chards & Co, Calcutta
SHRI A. K. MITRA ( Alternate )
SHRI S. P. NAP Railway Board ( Ministry of Railways )
SHEI J. R. OVALEKAR National Safety Council, Bombay
SHRI K. SRIDHAR ( Alternate )
SHRI H. C. RAI CEOUDHAE~Y Directorate General of Civil Aviation, New Delhi
LT-COL B. N. S. RAO Ministry of Defence ( DGI )
SHRI K. AAMA~RISHNA RAO Directorate General of Technical Development
SHEI 1. RATHINASAMI Fire Service, Government of Tamil Nadu, Madras
SHB~ U. NAEAYANA ( Alternate )
( Continued on page 2 )

e, Copyright 1977
BUREAU OF INDIAN STANDARDS
This publication is protected under the Indian Copyright Act ( XIV of 1957) and
reproduction in whole or in part by any means except wirh written permission of the
publisher shall be deemed to be an infringement of copyright under the said Act.
IS t 908 - 1975
( Continud from f~agc1 )
Mcm ban RCpCSd?lg
SEBIP. L. SEBAWTIN Oil and Natural Gas Commission,Dehra Dun
SHRI V. V. tbWdAl’XAIt (Al-)
SHRI G. C. SENAPATI Hindustan Steel Ltd, Ranchi
SHRI P. CHATTERJEE ( Altamuta )
SHRI P. H. SETHNA Kooverji Devshi & Co Pvt Ltd, Bombay
SHRI N. T. PANJWANI (Altarrub )
SHE1 1. V. SHAH Newage Industries, Surendranagar (Gujarat )
&RI B. J. SHAH ( Ahnotr)
SHRI V. N. SHARMA DGL Private Limited, New Delhi
SEBI c. R. SSBCAR Directorate General of Supplier & Disposals
SHRI D. K. SIRKAR Synthetics & Chemicals Ltd, Bar&By
SHRI R. S. SUNDARAX Delhi Fire Service, Delhi
SHRI TARIT SUR Sur l&am;: & Stamping Works Private Ltd,
C
SHRI S. Sun ( .&mkat6 )
SHRI N. P. VERQEE~E Heavy Engineering Corporation Ltd, Ranchi
SHBI B. V. WAQLE Fire Adviser, Government of Maharaahtra, Bombay
SHRI R. R. RAO ( Alturaat6 )
SERID. AJITEA SIMHA, Director General, IS1 ( Ex-o&io Mmbrr )
Director ( Civ Engg )

SEFUK.M. MATHUB
Deputy Director ( Civ Engg ), ISI

Water Fittings for Fire Fighting Purposes Subcommittee, BDC 22 : 1

GOaVU,cncr
SEBI P. N. MEHROTEA Ministry 01 Home Affairs

Members
SHRI G. B. MIGNON( Altumtduto
Shri P. N. Mehrotra )
SHRI P. CEAr%%RJEE Hindustan Steel Ltd, Ranchi
SHRI S. C. CHATTERJEE West Bengal Fire Services, Calcutta
Snar P. N. GH~SH Ministry of Defence ( R St D )
SHRI A. N. AELUWALIA ( Ahmut6 )
SHRI S. K. GUP~A Directorate General of Inspection ( Ministry of
Defence )
&ax B. K. GHOSE ( Ahnat )
SHRI V. S. JAI~P DGL Private Limited, New Delhi
SERI A. S. KTJLKABNI Bombay Fire Brigade, Bombay
SHBI H. C. RAI CHOUDEARY Directorate General of Civil Aviation, New Delhi
Srinr J. V. SHAH Newage Indurtrien, Surendranagar ( Gujarat )
 ISt908-1975

Indian Standatd
SPECIFICATION FOR
FIRE HYDRANT, STAND POST TYPE

( Second Revision )
0. FOREWORD
0.1 This Indian Standard ( Second Revision ) was adopted by the Indian
Standards Institution on 16 June 1975, after the draft finalized by the
Fire Fighting Sectional Committee had been approved by the Civil
Engineering Division Council.
0.2 Hydrants are invariably used for fire fighting purposes to derive water
from the water line. The hydrants could be stand post type or
underground that is sluice-valve fype. This standard covering fire
hydrants, stand post type was first published in 1958 and revised in 1965.
The second revision has been prepared to incorporate complete details of
duck-foot bend, flange riser and also to make proviaion for the two
outlets instead of one.
0.3 In the formulation of this standard due weightage has been given to
international co-ordination among the standards and practices prevailing
in different countries in addition to relating it to the practices in the
field in this country.
0.4 For the purpose of deciding whether a particular requirement of
this standard is complied with, the final value, observed or calculated,
expressing the result of a test or analysis, shall be rounded off in accord-
ance with IS : 2-1960*. The number of significant places retained in the
rounded off value should be the same as that of the specified value in this
standard.

1. SCOPE
1.1 This standard lays down the requirements regarding materials, shape
and dimensions, construction and test for fire hydrant, stand post type,
used for taking water from underground pipe line for fire fighting
purposes.

‘Rules for rounding off numerical valuer ( revised ) .

3
IS : 908 - 1975

2. GENERAL REQUIREMENTS
2.1 The hydrant shall consist of one or two sluice valves with road surface
box(es), a duck foot bend, flange riser and a stand post column fitted
with 63-mm male coupling(s). For the use in industries where required
instead of couplmg, the outlet be flanged so as to receive landing valve
conforming to IS : 5290-1969* ( see Fig. 1 and 2 ).

3. MATERIAL
3.1 Sluice valves shall be of Class I type with cap conforming to
IS: 780-1969t. It shall be provided with false spindle.

3.2 The road surface box shall conform to IS : 3950-1966:.

3.3 Duck foot bend, shall conform to IS : 1538-19695 heavy duty type.

3.4 The flange riser shall conform

_ ._. . . to IS : 7181-197411. The length of the
pipe shall be as required.

3.5 Stand post column shall be of cast iron, cast in one piece conforming
to Grade 20 of IS: 210-19707 and shape according to details given in
Fig. 2.
3.6 Male half coupling shall conform to IS : 903-1975** ( 63 mm) except
the tail which shall have parallel threads conforming to G-2f of
IS : 2643 (Part I)-1975tt instead of serration .
4. WORKMANSfiIP AND FINISH
4.1 All parts shall have good finish, clear from burrs, blow holes and
sharp edges; castings shall be clean and sound excluding plugging, welding
or repairs of any defects.

5. HYDROSTATIC TEST REQUIREMENT

5.1 Each hydrant shall be subject to hydrostatic test and shall prove
perfectly water tight under a hydraulic pressure of 200 metres head.

*Specification for landing valves ( internal hydrant ).

tSpecification for sluice valves for water-works purposes (50 to 300 mm size)
( fourth revision ).
SSpecification for surface boxes for sluice valves.
r&ecification for cast iron fittings for pressure pipes for water, gas and sewage
(jrst r&ion ).
IlSpecilication for horizontally cast iron double flanged pipes for water, gas and
sewage.
T[Specification for grey iron castings ( secondrevision ).
**Specification for fire hose delivery couplings, branch pipe, nozzles and nozzle
spanner ( second revision ).
$tDimensions f6r pipe threads for fastening purposes: Part I Basic profile and
dimensions (fita wish ).

4
 IS : 908 - 1975

600t2

Cl ROAD SURFACE
A BOXES

-FLANGE
RISE’R

TAIL PIECE
Omm SLUICE VALVES IN
CASE OF SINGLE OUTLET
SLUICE VALVES IN
CASE OF DOUBLE OUTLET

All dimensions in millimctres.

FIG. 1 FIRE HYDRANT, STAND POST TYPE ONE/TWO OUTLETS

5
Is I 908 - 1975

COWTAININO

Of 15 IIm l

50012
I

CLANOE 10 SIN?
umlNo VALVE
ISLC 1*5a500)

WIOll4 TO SUIT
CLANOE RL!+ER

2A

Ail dimensions in millimetres.

FIG. !i? STAND POST COLUMN

6
 6. COATING
6.1 Immediately after c:asting and before machining, all cast iron parts
shall be thoroughly cleaned, and before rusting commences, shall be
coated by dipping in a bath containing a composition hh &&W+CWS
base ( see IS : 158-1968* ) and maintained at ‘st +fz~.JH.aGBm 143
and 166°C. The proportions of the ingredients of the v&M shall
be so regulated as to produce a coating having prties given in 6.2
and 6.3.

6.2 The casting shall be re-heated before dipping, either by immersion

in hot water or by heating in an oven, or shall be held in the dipping
bath sufficiently long to reach an equivalent temperature, the method
used being at the maker’9 option. Care shall be taken to see that the
castings are perfectly dry immediately before dipping. On removal from
the bath the castings shall be sufficiently drained and ensure that no
portion is left uncoated.

6.3 The coating shall be such that it shall not impart any taste or smell
to water. The coating shall be smooth, glossy and tenacious, sufficiently
hard so as not to flow when exposed to a temperature of 77°C and not so
brittle at a temperature of 0°C as to chip off when scribed lightly with
the point of penknife1

7. PAINTING
7.1 Stand post of the hydrant shall be painted in the two coats of fire red
paint ( seeShade No. 536 of IS : 5-1961t ). *The top of the post column
above the outlet shall be painted two coats of canary yellow colour
(see Shade No. 309 in IS : 5-196lt ). The paint shall conform to
IS : 2932-l 964:.

8. CRITERIA FOR ACCEPTANCE

8.1 Each hydrant shall be tested for the requirements prescribed in this
standard.

9. MARKING
9.1 Each hydrant shall be clearly and permanently marked with the
following information:

a) Manufacturer’s name or trade-mark, and

b) Year of manufacture.

*Specification for ready mixed paint, brushing, bituminous, black, lead-free, acid,
alkali, water and heat resisting for generalpurposes ( second renision ).
t@lours for ready mixed paints ( second revision ).
$Specification for enamel, exterior, Type 2, (a) undercoating, (b) finishing, colour
as required.
I
IS t 908 - 1975

9.2 The cover of the road surface box shall have the letters ‘FH’
embossed on it and the cover shall be painted with black colour.
9.2.1 The product may also be marked with Standard Mark.

J+3 The use of the Standard Mark is governed by the provisions of Bureau o,
Indian Standards Act, 1986 and the Rules and Regulations made thereunder.
The details of conditions under which the licence for the use of Standard Mark
may be granted to manfucaturers or producers may be obtained from the Bureau.
of Indian Standards.
BUREAU OF INDIAN STANDARDS
Headquarters
Manak Bhavan, 9 Bahadur Shah Zafar Marg, NEW DELHI 110002
Telephones: 323 0131. 323 3375,323 9402
Fax : 91 11 3234062, 91 11 3239399, 91 1’ 3239382
Telegrams : Manaksanstha
(Common to all Off roes)
Central Laboratory. Telephcne

Plot No. 2019, Site IV, Sahibabad Industrial Area, Sahibabad 201010 R-77 00 .X!

Regional Offices:
Central : Manak Bhavan, 9 Bahadur Shah Zafar Marg, NEW DELHI 110002 323 76 17

*Eastern : l/14 CIT Scheme VII M, V.I.P. Road, Maniktola, CALCUTTA 700054 337 86 62

Northern : SC0 335336, Sector 34-A, CHANDIGARH 160022 60 38 43

Southern : C.I.T. Campus, IV Cross Road, CHENNAI 600113 23523 15

TWestern : Manakalaya, E9, Behind Marol Telephone Exchange, Andheri (East), 832 92 95
MUMBAI 400093

Branch Offices::
‘Pushpak’, Nurmohamed Shaikh Marg, Khanpur, AHMEDABAD 380001 550 13 48

$Peenya industrial Area, 1st Stage, Bangalore-Tumkur Road, 839 49 55

BANGALORE 560058

Gangotri Complex, 5th Floor, Bhadbhada Road, T.T. Nagar, BHOPAL 462003 55 40 21

Plot No. 62-63, Unit VI, Ganga Nagar, BHUBANESHWAR 751001 40 36 27

Kalaikathir Buildings, 670 Avinashi Road, COIMBATORE 641037 21 01 41

Plot No. 43, Sector 16 A, Mathura Road, FARIDABAD 121001 8-28 88 01

Savitri Complex, 116 G.T. Road, GHAZIABAD 201001 8-71 19 96

5315 Ward No.29, R.G. Barua Road, 5th By-lane, GUWAHATI 781003 54 11 37

5-8-56C, L.N. Gupta Marg, Nampally Station Road, HYDERABAD 500001 201083

E-52, Chitaranjan Marg, C-Scheme, JAIPUR 302001 37 29 25

117/418 B, Sarvodaya Nagar, KANPUR 208005 21 68 76

Seth Bhawan, 2nd Floor, Behind Leela Cinema, Naval Kishore Road, 23 89 23
LUCKNOW 226001

NIT Building, Second Floor, Gokulpat Market, NAGPUR 440010 52 51 71

Patliputra Industrial Estate, PATNA 8OOOi3 26 23 05

Institution of Engineers (India) Building 1332 Shivaji Nagar, PUNE 411005 32 36 35

T.C. No. 14/l 421, University P. 0. Palayam, THIRUVANANTHAPURAM 695034 621 17

*Sales Office is at 5 Chowringhee Approach. P.O. Princep Street, 27 1085

CALCUTTA 700072

tSales Cffice is at Novelty Chambers, Grant Road, MUMBAI 400007 309 65 28

SSales Office is at ‘F’ Block, Unity Building, Narashimaraja Square, 222 39 71

BANGALORE 560002