Product data sheet ATV32H075M2

Characteristics variable speed drive ATV32 - 0,75 kw - 200 V -

1 phase - with heat sink

Main
Range of product Altivar 32
Product or component Variable speed drive
type
Product destination Asynchronous motors
Synchronous motors
Product specific appli- Complex machines
cation
Function available -
Assembly style With heat sink
Component name ATV32
EMC filter Class C2 EMC filter integrated
Network number of 1 phase

It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.
phases
[Us] rated supply volt- 200...240 V - 15...10 %
age
Supply voltage limits 170...264 V
Supply frequency 50...60 Hz - 5...5 %
Network frequency lim- 47.5...63 Hz
its
Motor power kW 0.75 kW 200...240 V

The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.
This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
Motor power hp 1 hp 200...240 V

Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.
Complementary
Line current 8.5 A 240 V 1 phase 0.75 kW 1 hp
10.1 A 200 V 1 phase 0.75 kW 1 hp
Apparent power 2 kVA 240 V 1 phase 0.75 kW 1 hp
Prospective line Isc <= 1 kA 1 phase
Nominal output current 4.8 A 4 kHz 240 V 0.75 kW 1 hp
Maximum transient current 7.2 A 60 s 0.75 kW 1 hp
Speed drive output frequency 0.5...599 Hz
Nominal switching frequency 4 kHz
Switching frequency 2...16 kHz adjustable
Speed range 1...100 asynchronous motor in open-loop mode
Speed accuracy +/- 10 % of nominal slip 0.2 Tn to Tn
Torque accuracy +/- 15 %
Transient overtorque 170...200 %
Braking torque < 170 % with braking resistor
Asynchronous motor control profile Voltage/Frequency ratio, 2 points
Voltage/Frequency ratio, 5 points
Flux vector control without sensor - Energy Saving, NoLoad law
Flux vector control without sensor, standard
Voltage/Frequency ratio - Energy Saving, quadratic U/f
Synchronous motor control profile Vector control without sensor
Regulation loop Adjustable PID regulator
Motor slip compensation Automatic whatever the load
Not available in voltage/frequency ratio (2 or 5 points)
Adjustable 0...300 %
Local signalling 1 LED red drive fault
1 LED red CANopen error
1 LED green CANopen run
1 LED red drive voltage
Output voltage <= power supply voltage

Jun 15, 2015

1
Noise level 43 dB 86/188/EEC
Insulation Electrical between power and control
Electrical connection Screw terminal 1.5...4 mm² AWG 14...AWG 10 power supply
Removable screw terminals 1.5...2.5 mm² AWG 14...AWG 12 motor/braking re-
sistor
Screw terminal 0.5...1.5 mm² AWG 18...AWG 14 control
Tightening torque 0.6 N.m 5.3 lb/ft power supply
0.7 N.m 7.1 lb/ft motor/braking resistor
0.5 N.m 4.4 lb/ft control
Supply Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 % <=
10 mA overload and short-circuit protection
Analogue input number 3
Analogue input type Current AI3 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by config-
uration) 250 Ohm 10 bits
Bipolar differential voltage AI2 +/- 10 V DC 30000 Ohm 10 bits
Voltage AI1 0...10 V DC 30000 Ohm 10 bits
Sampling duration 2 ms AO1 analog
2 ms AI1, AI2, AI3 analog
Response time 2 ms R2A, R2C relay
2 ms R1A, R1B, R1C relay
8 ms +/- 0.7 ms LI1...LI6 logic
Accuracy +/- 2 % AO1 for a temperature of -10...60 °C
+/- 1 % AO1 for a temperature of 25 °C
+/- 0.5 % AI1, AI2, AI3 for a temperature of 25 °C
+/- 0.2 % AI1, AI2, AI3 for a temperature of -10...60 °C
Linearity error +/- 0.3 % AO1
+/- 0.2...0.5 % of maximum value AI1, AI2, AI3
Analogue output number 1
Analogue output type Software-configurable voltage AO1 0...10 V 470 Ohm 10 bits
Software-configurable current AO1 0...20 mA 800 Ohm 10 bits
Discrete output number 3
Discrete output type Logic LO
Configurable relay logic R2A, R2B NO 100000 cycles
Configurable relay logic R1A, R1B, R1C NO/NC 100000 cycles
Minimum switching current 5 mA 24 V DC configurable relay logic
Maximum switching current 5 A 30 V DC resistive cos phi = 1 R2
5 A 250 V AC resistive cos phi = 1 R2
2 A 30 V DC inductive cos phi = 0.4 R1, R2
2 A 250 V AC inductive cos phi = 0.4 R1, R2
4 A 30 V DC resistive cos phi = 1 R1
3 A 250 V AC resistive cos phi = 1 R1
Discrete input number 7
Discrete input type Safe torque off STO 24...30 V DC 1500 Ohm
Switch-configurable PTC probe LI6 24...30 V DC
Programmable as pulse input 20 kpps LI5 24...30 V DC level 1 PLC
Programmable (sink/source) LI1...LI4 24...30 V DC level 1 PLC
Discrete input logic Positive logic (source) LI1...LI6 < 5 V > 11 V
Negative logic (sink) LI1...LI6 > 19 V < 13 V
Acceleration and deceleration ramps S
U
CUS
Deceleration ramp automatic stop DC injection
Deceleration ramp adaptation
Linear
Ramp switching
Braking to standstill By DC injection
Protection type Thermal protection drive
Short-circuit between motor phases drive
Overheating protection drive
Overcurrent between output phases and earth drive
Input phase breaks drive
Communication port protocol CANopen
Modbus
Type of connector 1 RJ45 Modbus/CANopen on front face
Physical interface 2-wire RS 485 Modbus
Transmission frame RTU Modbus
Type of polarization No impedance Modbus

2
Number of addresses 1...247 Modbus
1...127 CANopen
Method of access Slave CANopen
Electromagnetic compatibility Voltage dips and interruptions immunity test IEC 61000-4-11
Radiated radio-frequency electromagnetic field immunity test level 3 IEC
61000-4-3
Electrostatic discharge immunity test level 3 IEC 61000-4-2
Electrical fast transient/burst immunity test level 4 IEC 61000-4-4
Conducted radio-frequency immunity test level 3 IEC 61000-4-6
1.2/50 µs - 8/20 µs surge immunity test level 3 IEC 61000-4-5
Width 45 mm
Height 325 mm
Depth 245 mm
Product weight 2.4 kg
Option card Communication card Profibus DP V1
Communication card Ethernet/IP
Communication card DeviceNet
Communication card CANopen open style
Communication card CANopen daisy chain

Environment
Standards EN 55011 class A group 1
EN 61800-3 environments 1 category C2
EN 61800-3 environments 2 category C2
EN/IEC 61800-3
EN/IEC 61800-5-1
Product certifications CSA
C-Tick
GOST
NOM 117
UL
Marking CE
Pollution degree 2 EN/IEC 61800-5-1
IP degree of protection IP20 EN/IEC 61800-5-1
Vibration resistance 1.5 mm peak to peak 3...13 Hz EN/IEC 60068-2-6
1 gn 13...200 Hz EN/IEC 60068-2-6
Shock resistance 15 gn 11 ms EN/IEC 60068-2-27
Relative humidity 5...95 % without dripping water IEC 60068-2-3
5...95 % without condensation IEC 60068-2-3
Ambient air temperature for operation 50...60 °C with derating factor
-10...50 °C without derating
Ambient air temperature for storage -25...70 °C
Operating altitude 1000...2000 m with current derating 1 % per 100 m
<= 1000 m without derating
Operating position Vertical +/- 10 degree

Offer Sustainability
Sustainable offer status Not Green Premium product
RoHS (date code: YYWW)
Compliant - since 1007 - Schneider Electric declaration of conformity
Product environmental profile Available Download Product Environmental
Product end of life instructions Available Download End Of Life Manual

3
Product data sheet ATV32H075M2
Dimensions Drawings

Size A

Dimensions

4
Product data sheet ATV32H075M2
Mounting and Clearance

Mounting and Clearance

(1) Minimum value corresponding to thermal constraints. A 150 mm clearance may help to connect the ground.
(2) Optional GV2 circuit-breaker

Option: Protection Device, GV2 circuit-breaker

The drive is prepared to be equipped with an optional GV2 circuit-breaker.

The GV2 circuit-breaker is directly mounted on the drive. Mechanical and electrical link are made using the optional adapter. The options are
supplied with detailed mounting instruction sheet.
NOTE: The product overall dimension, including GV2 adapter and EMC plate mounted, becomes 424 mm (16.7 in.)

(1) Ground screw (HS type 2 - 5x12)

5
Product data sheet ATV32H075M2
Connections and Schema

Connection Diagrams

Single or Three-phase Power Supply - Diagram with Line Contactor

Connection diagrams conforming to standards EN 954-1 category 1 and IEC/EN 61508 capacity SIL1, stopping category 0 in accordance
with standard IEC/EN 60204-1.

(1) Line choke (if used)

(3) Fault relay contacts, for remote signaling of drive status

Single or Three-phase Power Supply - Diagram with Switch Disconnect

Connection diagrams conforming to standards EN 954-1 category 1 and IEC/EN 61508 capacity SIL1, stopping category 0 in accordance
with standard IEC/EN 60204-1.

(1) Line choke (if used)

(3) Fault relay contacts, for remote signaling of drive status

Diagram with Preventa Safety Module (Safe Torque Off Function)

Connection diagrams conforming to standards EN 954-1 category 3 and IEC/EN 61508 capacity SIL2, stopping category 0 in accordance
with standard IEC/EN 60204-1.
When the emergency stop is activated, the drive power supply is cut immediately and the motor stops in freewheel, according to category 0
of standard IEC/EN 60204-1.
A contact on the Preventa XPS AC module must be inserted in the brake control circuit to engage it safely when the STO (Safe Torque Off)
safety function is activated.

6
(1) Line choke (if used)
(2) It is essential to connect the shielding to the ground.
(3) Fault relay contacts, for remote signaling of drive status
The STO safety function integrated into the product can be used to implement an "EMERGENCY STOP" (IEC 60204-1) for category 0 stops.
With an additional, approved EMERGENCY STOP module, it is also possible to implement category 1 stops.
STO function
The STO safety function is triggered via 2 redundant inputs. The circuits of the two inputs must be separate so that there are always two
channels. The switching process must be simultaneous for both inputs (offset < 1 s).
The power stage is disabled and an error message is generated. The motor can no longer generate torque and coasts down without braking.
A restart is possible after resetting the error message with a "Fault Reset".
The power stage is disabled and an error message is generated if only one of the two inputs is switched off or if the time offset is too great.
This error message can only be reset by switching off the product.

Diagram without Preventa Safety Module

Connection diagrams conforming to standards EN 954-1 category 2 and IEC/EN 61508 capacity SIL1, stopping category 0 in accordance
with standard IEC/EN 60204-1.
The connection diagram below is suitable for use with machines with a short freewheel stop time (machines with low inertia or high resistive
torque).
When the emergency stop is activated, the drive power supply is cut immediately and the motor stops in freewheel, according to category 0
of standard IEC/EN 60204-1.

(1) Line choke (if used)

(2) It is essential to connect the shielding to the ground.
(3) Fault relay contacts, for remote signaling of drive status
The STO safety function integrated into the product can be used to implement an "EMERGENCY STOP" (IEC 60204-1) for category 0 stops.

Control Connection Diagram in Source Mode

7
(1) Reference potentiometer SZ1RV1202 (2.2 kΩ) or similar (10 kΩ maximum)

8
Product data sheet ATV32H075M2
Performance Curves

Derating Curves

Derating curve for the nominal drive current (In) as a function of temperature and switching frequency.

X Switching frequency
Above 4 kHz, the drive will reduce the switching frequency automatically in the event of an excessive temperature rise.

9
Product data sheet ATV32H075M2
Technical Description

Sink / Source Switch Configuration (SW1)

The logic input switch (SW1) is used to adapt the operation of the logic inputs to the technology of the programmable controller outputs.
Switch SW1 set to “Source” position

Switch SW1 set to “Source” position and use of an external power supply for the LIs

Switch SW1 set to “Sink Int” position

Switch SW1 set to “Sink Ext” position

10