Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Extended LF Ferrite Transducer Extended LF Ferrite Transducer

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

18LW1400

Extended LF Ferrite Transducer


KeyFeatures
98 dB SPL 1W / 1m average sensitivity
100 mm (4 in) Interleaved Sandwich Voice coil (ISV)
1000W AES power handling
Carbon fiber reinforced straight ribbed cone
Double Silicon Spider (DSS) for improved excursion control and linearity
Double Demodulating Rings (DDR) for lower distortion
Improved heat dissipation via unique basket design and multiple backplate vents
Weather protected cone and plates for outdoor usage
Ideal for high SPL subwoofer designs

Description
The 18LW1400 is an extended low frequency loudspeaker which sets an industry standard in 18"
(460 mm) high performance transducers. It has been designed for use as a low bass or sub-
woofer component, in either a reflex, bandpass or horn loaded configuration, in high power
auditorium or arena loudspeaker systems. The transducer provides clean, undistorted low
frequency reproduction at very high sound pressure levels and is able to withstand high power
levels without damage. 18LW1400 design features include a large displacement suspension
system which, in conjunction with a carbon fiber reinforced, straight ribbed cone and the Double
Silicon Spider (DSS), assure an ultra-linear piston action and provide full control across the entire
working range. A 100mm copper voice coil based on Interleaved Sandwich Voice coil (ISV)
technology increases this control, providing high levels of thermal stability and durability. ISV
technology is based on a high strength fiberglas former with half the coil wound on the outside
and half on the inside and bonded together using unique high temperature resin adhesives.
Hence, a balanced linear motor unit, exerting an exceptionally high force factor is achieved. The
low distortion and unmatched sound quality of the 18LW1400 has been significantly improved
by the Double Demodulating Rings (DDR) embedded in the pole piece of the magnetic structure.
These have been designed to dramatically reduce the intermodulation and harmonic distortion
while improving the transient response. Excellent heat dissipation has been achieved from the
special basket design which incorporates air channels between the basket and the magnetic top
plate. In addition, 8 air vents incorporated into the back plate are aligned with the voice coil to
force air into the lower part of the gap. Maximum flux density in the gap is assured by the top
and back plate design, resulting in a high BL factor. 18LW1400 is able to perform properly under
inclement weather conditions. The exclusive cone treatment improves pulp strength and gives
water repellent properties to both sides of the cone. In addition, the special treatment applied
to top and back plates of the magnetic structure is far more resistant to the corrosive effects of
salts and oxidization.

Models
Model Code Information
0221883110 0221883110 8 Ohm
0221843110 0221843110 4 Ohm
18LW1400
Extended LF Ferrite Transducer
General Specifications
Nominal Diameter 460 mm (18 in)
Rated Impedance 8 Ohm
AES Power 1000 W
Program Power 1400 W
Peak Power 7000 W
Sensitivity 98 dB
Frequency Range 28 - 2500 Hz
Power Compression @-10dB 0,8 dB
Power Compression @-3dB 2,1 dB
Power Compression @Full Power 3,0 dB
Max Recomm. Frequency 150 Hz FREQUENCY RESPONSE CURVE OF 18LW1400 MADE ON 180 LIT. ENCLOSURE TUNED 35HZ
Recomm. Enclosure Volume 130 ÷ 350 lt. (4,59 ÷ 12,36 cuft) IN FREE FIELD (4PI) ENVIRONMENT. ENCLOSURE CLOSES THE REAR OF THE DRIVER. THE
Minimum Impedance 6,4 Ohm at 25°C THIN LINE REPRESENTS 45 DEG. OFF AXIS FREQUENCY RESPONSE.
Max Peak To Peak Excursion 50 mm (1,97 in)
Voice Coil Diameter 100 mm (4 in)
Voice Coil Winding Material copper
Suspension Triple roll, Polycotton
Cone Straight Ribbed, carbon fiber reinforced paper

Thiele Small Parameters


Fs 31 Hz
Re 5 Ohm
Sd 0,1225 sq. mt. (189,88 sq. in.)
Qms 7,2
Qes 0,31
Qts 0,29 FREE AIR IMPEDANCE MAGNITUDE CURVE
Vas 297 lt. (10,49 cuft)
Mms 190 gr. (0,42 lb)
BL 24,7 Tm
Linear Mathematical Xmax ± 9 mm (± 0,35 in) Notes
Le (1kHz) 2,3 mH
Ref. Efficiency 1W@1m (half space) 96,5 dB 1) AES power is determined according to AES2-1984 (r2003) standard
2) Program power rating is measured in 180 lit enclosure tuned 35Hz using a 40 - 400Hz band
Mounting information limited pink noise test signal with 50% duty cycle, applied for 2 hours.
3) The peak power rating represents the maximum permitted instantaneous peak power level
Overall diameter 462 mm (18,18 in) over a maximum period of 10ms which will be withstood by the loudspeaker without damage.
N. of mounting holes and bolt 8 4) Sensitivity represents the averaged value of acoustic output as measured on the forward
Mounting holes diameter 8,5 mm (0,33 in) central axis of cone, at distance 1m from the baffle panel, when connected to 2,83V sine wave
Bolt circle diameter 438-440 mm (17,24-17,32 in) test signal swept between 100Hz and 500Hz with the test specimen mounted in the same
Front mount baffle cutout ø 416 mm (16,38 in) enclosure as given for (1) above.
Rear mount baffle cutout ø 422 mm (16,61 in) 5) Frequency range is given as the band of frequencies delineated by the lower and upper limits
Total depth 215,4 mm (8,48 in) where the output level drops by 10 dB below the rated sensitivity in half space environment.
Flange and gasket thickness 26 mm (1,02 in) 6) Power compression represents the loss of sensitivity for the specified power, measured from
Net weight 13,3 kg (29,36 lb) 50-500 Hz, after a 5 min pink noise preconditioning test at the specified power.
Shipping weight 14,9 kg (32,9 lb) 7) Linear Math. Xmax is calculated as (Hvc-Hg)/2 + Hg/4 where Hvc is the coil depth and Hg is the
gap depth.
CardBoard Packaging dimensions 482 x 482 x 257 mm (19 x 19 x 10,1 in)

You might also like