B B M-New-syllabus PDF
B B M-New-syllabus PDF
B B M-New-syllabus PDF
KOTTAYAM
UG PROGRAMME
IN
BACHELOR OF BUSINESS MANAGEMENT
(BBM)
Prepared by
Faculty & Board of Studies
MAHATMA GANDHI UNIVERSITY, KOTTAYAM
Sri. Sooraj S., Assistant Professor, SAS SNDYP Yogam College, Konni
Acknowledgement
The Faculty & Board of Studies in Management acknowledges the
contributions, support and recommendations from participants of the workshop and
faculty members in Management Studies from various colleges and departments in
Mahatma Gandhi University and other experts from banking & insurance sector and
other business sectors in restructuring the scheme and syllabus.
About the Programme
Management is the art, science and process of getting things done through
others. The success of business depends on the ability in making use of the available
resources efficiently and effectively at minimum cost. For the proper and efficient use
of resources, the persons who are responsible for its utilization should have adequate
knowledge and skill in various sectors. Such knowledge and skill help to eliminate all
sorts of wastages in different segments of the organization resulting in increased
efficiency and better performance.
The severe competition in the business sector accelerates the demand for
efficient and prudent manager for the effective functioning of business organizations.
The revised syllabus for BBM programme aims to create efficient managers having
adequate knowledge and skill in various areas to function effectively in the modern
competitive business field. It also aims to provide a strong foundation to those
students who are prepared to pursue post graduation programme in Business
Management.
Programme Objectives
The BBM programme is restructured with the following specific objectives:
a) To attract more potential student to the management field, considering the wide
scope for them in getting placed in attractive managerial positions, due to the
spread of multinational corporations.
b) To provide a graduation programme with basic knowledge in various
management and business subjects, so as to be a feeder course for MBA, CA,
ICWA, M. Com. and other PG programmes.
c) To develop the various managerial skill, especially the soft skills among the
students, so that they themselves can pursue their career with thereon business
concerns, individually or jointly.
d) To train and develop the students in the right dimension so that they will
function as good managers with excellence in performance as per the business
ethics and standards for the welfare of the entire community.
Admission
The eligibility for admission to BBM Degree Programme under the Mahatma
Gandhi University is a pass in Pre-degree, Plus Two or equivalent examinations in
Science /Commerce/Arts stream.
Registration
a) The strength of students for each programme shall be as per the existing orders,
as approved by the University.
b) The college shall send a list of students registered for each programme in each
semester giving the details of courses registered including repeat courses to the
University in the prescribed form within 20 days from the commencement of
the Semester.
Duration of Course
a) The duration of BBM Degree programme shall be six semesters.
b) There shall be two semesters in an academic year, the odd semester
commences in June and on completion, the even semester commences after a
semester- break of three days with two months vacation during April and May.
For Course BM 1 CRT02 Soft Skill Management, the internal marks should be
distributed as follows:
Internal Theory Test paper: 5 marks
Two internal practical examinations: 5 marks
Attendance: 5 marks
Assignment/ Seminar: 5 marks
For Course BM 6 PRP31 Case Study Development and Analysis / Project Report,
the internal marks should be distributed as follows:
Internal viva-voce examination:10 marks
Presentation: 5 marks
Punctuality: 5 marks
Open Course offered under the programme
BM5OPT 25 Modern Banking
Scheme and Syllabus for BBM Programme – 2017 admission onwards
Course Title Course
Maximum Marks
Duration of Exam in hours
No
Extern
Internal
Credits
Total
al
BM 1 Management Core 6 3 20 80 100 4
CRT01 Methodology
Optional Paper I
BM6CBT29 Strategic Management
BM6CBT30 Production Management
BM6CBT31 Financial Management
Optional Paper II
BM6CBT32 Industrial Relation Management
BM6CBT33 Goods & Service Tax
BM6CBT34 Income Tax: Assessment & Procedure
SEMESTER I
SEMESTER I
No.ofLecturehoursperwe
ExternalMaximumMar
Internal
DurationofExaminhours
Credits
Total
ek
ks
Course
Title Course
No
CRT01 Methodology
CRT02 Management
CMT03 Mathematics I
CMT04 Statistics I
CCT05
Total credits :4
Contact Hours :6
Aim: To familiarize the students with the basics of management principles, theories
and practices
Objectives: On completion of the course the students should be able to understand the
concepts and principles of Management
MODULE I
Introduction
Meaning, definition, nature and characteristics of management – Scope, levels and
functions of management - Management as science, art or profession - Management &
Administration - Principles of management - Social responsibility of a Manager
MODULE II
Evolution of Management Thought
History – Stages of development - Taylor’s Scientific Management - Fayol’s theory -
Elton Mayo and Hawthorne experiments - Contributions of Peter F. Drucker
MODULE III
Planning
Meaning and definition - nature and significance- planning process- planning premises -
types of plans- objectives, strategies, policies, procedures, programmes and practices
– steps – limitations
MODULE V
Directing & Controlling (excluding Communication)
Directing( basic aspects only) -meaning and nature of directing – Motivation -
Maslow’s Need Hierarchy theory , Herzberg’s two factor theory and McGregor’s X
and Y theory - Leadership – Meaning -Formal and Informal Leadership –
Characteristics - Leadership Styles - Autocratic - Democratic, Laissez faire–
Coordination–meaning, importance
References:
Harold Koontz & Weihrich , Essentials of Management , Tata McGraw Hills
Publishing Co.
L. M. Prasad, Principles of Management, Sultan Chand & Sons
Koontz & O’Donnell, Management, Tata McGraw Hills Publishing Co.
V.S.P. Rao, Management Process and Organization, Excel Books
Tulsian P.C., & Pandey, Business Organization & Management, Pearson
Education
BM 1 CRT02 Soft Skill Management
Total credits :4
Contact Hours :6
Aim: To facilitate the students to develop various soft skills in the management
perspective
Objectives: On completion of the course the students should be able to practice
various soft skills for the efficient management of an enterprise
MODULE I
Introduction
MODULE II
Communication
MODULE III
Public Speaking
MODULE V
Meetings & Group Discussions
Importance of Meetings - Opening and Closing Meetings - Participating and
Conducting Group discussions - Brain Storming, e– Meetings, preparing agenda and
minutes of the meeting
Skill Development: Conduct a mock meeting and draft minutes of the meeting-
Conduct a mock GD & mock interview - Draft a letter of enquiry to purchase a laptop
- Draft the bio-data - Prepare the Career Plan – power point presentation on Business
& social etiquette
References:
Rai & Rai, Soft Skill for Business, Himalaya Publishing House
Santhosh Kumar, Soft Skill for Business, Vikas Publishing House
C.G. Krishnamacharyulu & Lalitha, Soft Skills of Personality Development,
Himalaya Publishing House
Lesikar R.V. & Flatley M. E., Basic Business Communication Skills for
Empowering the Internet Generation, Tata McGraw Hill Publishing Company
Ltd.,New Delhi
Rai & Rai, Business Communication, Himalaya Publishing House
BM 1 CMT03 Business Mathematics I
Total credits :3
Contact Hours :4
Aim of the Course: This course aims at the acquisition of the basic mathematical
skills expected of a student of business management.
Module I
Basic Algebra
Ratio, proportion and variation, Laws of indices, Linear, simultaneous and quadratic
equations and their methods of solution (Nature of roots and word problems are
excluded)
Module II
Set Theory
Sets, Types of sets, Union, intersection and complement of sets, Relations and
functions (Basic ideas only), Composition of functions (Types of functions are
excluded)
Module III
Commercial Arithmetic
Profit and loss, Discounts, Logarithms and its laws, Simple and compound interests
Module IV
Progressions
Arithmetic progression, its nth term, sum to n terms, Formulae for the sum, sum of
squares, and sum of cubes of the first n natural numbers and the simple application of
these formulae, Geometric progression, its nth term, sum to n terms and sum to
infinity, Harmonic progression of two numbers, Relationship between AP, GP and HP
Module V
Permutations and Combinations
Simple problems on permutations and combinations (Identities and their proofs are
excluded)
References:
Total credits :4
Contact Hours :4
Aim of the Course: This course aims at the acquisition of the basic statistical skills
expected of a student of business management, which could help in understanding,
analyzing and forecasting.
Module I
Introduction
Meaning, scope and limitations of statistics, collection and editing of data, sampling
techniques, Diagrammatic and graphic representation of data
Module II
Measures of Central Tendency
Meaning and characteristics of a good average, Mean, median, mode (limited to
simple cases only), GM and HM – Computation, merits and demerits
Module III
Measures of Dispersion
Meaning and characteristics of a good measure of dispersion, Computation of range,
QD, MD (about mean only), SD and their coefficients, Coefficient of variation
Module IV
Correlation Analysis
Meaning, definition and types of correlation, Computation of coefficient of correlation
by Karl Pearson’s and Rank methods (limited to raw data only)
Module V
Regression Analysis
Meaning of regression, Computation of regression coefficients and regression
equations (limited to raw data only, properties of regression coefficients excluded)
Note: Statistical tables and NPC are permitted, Theorems and proofs are excluded.
References:
Maximum Marks
No
External
Internal
Credits
Total
BM 2 Financial Core 6 3 20 80 100 4
CRT06 Accounting
CRT07 Development
CMT08 Mathematics II
CMT09 Statistics II
CCT10
Total credits :4
Contact Hours :6
Aim: To acquaint students with the accounting concepts, tools and techniques
influencing business organizations
Objectives: On completion of the course, the students should be able to apply the
accounting concepts and rules as well to record the transactions and prepare the final
statements
MODULE I
Introduction to Financial Accounting
Meaning and definition – Objectives of Accounting – Functions of Accounting –
Users of Accounting Information – Limitations of Accounting – Accounting
Principles – Accounting Concepts and Conventions- Accounting Standards – Indian
Accounting Standards
MODULE II
Accounting Records
Kinds of Accounts – Rules - Journal – Ledger - Subsidiary books – Purchases Book –
Sales Book – Purchase Returns Book – Sales Return Book – Bills Receivable Book –
Bills Payable Book – Cash Book -Simple Cash Book, Double Column Cash Book,
Three Column Cash Book and Petty Cash Book–Trial Balance
MODULE III
Bank Reconciliation Statement
Meaning- need - reasons for disagreement - Preparation of Bank Reconciliation
Statement
MODULE IV
Depreciation, Reserves and Provisions
Depreciation– meaning – need for depreciation – methods - Accounting for
depreciation
Reserves & provisions - meaning – importance –provision for doubtful debts,
provision for discount, provision for taxation – Accounting for reserves and
provisions
MODULE V
Final Accounts of Sole Trader
Adjusting and closing entries – trading & P&L account (with adjustments) – Balance
sheet
References:
Total credits :4
Contact Hours :6
Aim: To develop the entrepreneurial abilities in the students and help them to prepare
a project report.
MODULE I
Entrepreneur & Entrepreneurship
Definition - traits and features – classification of Entrepreneurs-Women
entrepreneurs- Problems of entrepreneurs - Role of entrepreneurs in India
MODULE II
Entrepreneurial Development Programme & Support Schemes
Concept - Need for training- phases of EDP- curriculum & contents of Training
Programme-Support systems, Target Groups- Institutions conducting EDPs in India
and Kerala.
Role of Business Incubators- Funding and Support for start-ups- ASPIRE scheme-
Pradan Mantri Mudra Yojana Scheme -Industrial Estates- Special Economic Zones
MODULE III
Promotion of Venture
Opportunity Analysis - Project identification and selection; External environmental
analysis- economic, social, technological and competitive factors; Legal requirements
for establishment of a new unit; loans; Over run finance; Bridge finance; Venture
capital; Providing finance – Securing loans from financial institutions
MODULE IV
Small Business Enterprise
Identifying the business opportunity in various sectors - formalities for setting up of a
small business enterprise - Institutions supporting small business enterprise - EDII
(Entrepreneurship Development Institute of India), SIDO (Small Industries
Development Organization) NSIC (National Small Industries Corporation Ltd.)
NIESBUD (National Institute for Entrepreneurship and Small Business Development)
Sickness in small business enterprise - Causes and remedies
MODULE V
Project Identification & Formulation
Project identification- meaning- types- Project Management- Project life Cycle-
Sources of Project idea- Constraints in a project- Sources of Business idea- Legal
Protection in India-Trademarks- Copyright- Patent- Geographical Indication –Project
Formulation - Stages in project formulation -meaning of a project report -
significance - contents - planning commission guidelines for formulating a project
report
References:
S. S. Khanka, Entrepreneurial Development, S. Chand & Sons
Desai & Vasant, Small Scale Business and Entrepreneurship, Himalaya
Publications Ltd.
V.S.P. Rao, Business Entrepreneurship and Management,Vikas Publishing House
BM 2 CMT08 Business Mathematics II
Total credits :3
Contact Hours :4
Aim of the Course: This course aims at the acquisition of the basic mathematical
skills expected for a student of business management.
Module I
Matrix Algebra
Matrices and its types, Addition and multiplication of matrices, their basic algebraic
properties and verification, Transpose of a matrix and its properties, Determinants,
Singular and non-singular matrices, Minors and co-factors of an element, Inverse of a
matrix using adjoint matrix, Cramer’s rule, Rank of a matrix by evaluating
determinants of its submatrices
Module II
Vector Algebra
Definition of a vector, Unit vector and zero vector, Dot product of vectors, Condition
for two vectors to be parallel and perpendicular
Module III
Differentiation
Module IV
Integration
Integration of simple algebraic, exponential and logarithmic functions, Integration by
parts, Application of integration and differentiation for finding marginal revenue,
marginal cost and average cost
Module V
Analytic Geometry
Cartesian co-ordinate system, Slope, Distance formula, Equations of straight lines in
slope intercept form, point slope form, two-point form and intercept form
Note: NPC is permitted. Derivations and proofs excluded for all theorems and
formulae.
References:
Total credits :4
Contact Hours :4
Aim of the Course: This course aims at the acquisition of the basic statistical skills
expected for a student of business management, which could help in understanding,
analyzing, forecasting and decision-making.
Module I
Index Numbers
Definition and importance of Index numbers, Computation of index numbers by the
methods of simple aggregative, simple average of price relatives, Laspeyer’s,
Paasche’s, Fisher’s, Bowley-Dorbish , Marshall-Edgeworth methods and weighted
average of price relatives, Quantity index numbers, Time and factor reversal tests and
their verification, Circular test, Meaning and computation of cost of living index
number
Module II
Time Series Analysis
Meaning of a time series, Components of a time series, Computation of trend by
freehand, semi-average, moving average methods, Straight line trend by the method of
least squares
Module III
Probability Theory
Definition of probability and its properties (different approaches to probability
excluded), Addition theorem, Multiplication theorem, Conditional probability
Module IV
Interpolation & Extrapolation
Meaning, Assumptions and limitations, Newton’s method of divided differences and
Lagrange’s method, Newton’s forward interpolation method
Module V
Linear Programming
Linear programming as a method of solving inequalities in two variables by graphical
method (word problems excluded), Transportation problems by lowest cost entry
method (other methods excluded), Assignment problems by Hungarian method
(problems with less than 6 steps only)
Note: Statistical tables and NPC permitted. Theorems and proofs excluded
References:
Credit
DurationofExam
InternalMaximu
No.ofLecturehour
Course Title Course
Extern
Total
sperweek
mMarks
inhours
al
s
No
CRT11 Accounting
CRT12
CRT13 Management
CRT14 Management
CMT15 Informatics
Total credits :4
Contact Hours : 5
Module I
Share Capital
Introduction – Shares – Share Capital – Issue of Shares – Forfeiture of shares –
Surrender of shares – Rights shares – Underwriting – Alteration of Share capital –
Buyback of shares
Module II
Redemption of Shares & Debentures
Redemption of preference shares – Debentures – Classification – issue – redemption
of debentures
Module III
Final Accounts of Companies
Meaning – Legal requirements – preparation of final accounts – profit and loss
account – Balance sheet
Module IV
Human Resources Accounting (theory only)
Concept - Valuation of human resources – Approaches – Recording and disclosure in
financial statements – Importance of human resource accounting
Module V
New Trends in Accounting (theory only)
Objectives of social accounting – Reporting of social cost benefit information -
Recent developments in accounting – Value added statement concept – advantages –
limitations - Economic value assed concept- Environmental accounting – significance
- Brand accounting – Lean accounting – Forensic accounting – International
accounting
References:
S. N. Maheswary & S. K. Maheswary, Advanced Accountancy, Vikas
Publishing House
S. P. Jain & K. L. Narang, Advanced Financial Accounting, Kalyani
Publishers
R. L. Gupta & M. Radhaswamy, Advanced Accounting, Sultan Chand & Sons
M. C. Shukla, T. S. Grewal & S. C. Gupta, Advanced Accountancy, S Chand
& Co.
BM 3 CRT12 Corporate Laws
Total credits :4
Contact Hours :5
Aim – To familiarise with the legal aspects directly affecting the business.
Objective : The students will be able to understand the various aspects relating to
formation, management and winding up of companies.
Module I
The Companies Act, 2013
Introduction - historical back ground – meaning – importance- types of companies –
features – corporate veil
Module II
Promotion & Incorporation of a Company
Meaning – promoters – rights duties and liabilities – remunerations – pre-
incorporation contracts – personal liability – Board of directors – appointment –
removal – duties and liabilities – managing director and managers – rights and duties
Module III
Registration & Incorporation
Memorandum of association – Articles of association – alteration – registration –
commencement of business – Doctrine of ultravires – Doctrine of constructive notice
– Indoor management – Prospectus – types –statement in lieu of prospectus - liability
for misstatement in prospectus – shares and debentures – types – issue – redemption –
public deposits.
Module IV
Company Meetings
Meaning – kinds - requisites of a valid meeting – chairman – agenda – minutes –
quorum – motions and resolutions – voting – types – proxy – postponement of
meetings.
Module V
Winding up of Companies
Meaning – types – Compulsory winding up – grounds – procedure -Voluntary
winding up – types – procedure - Liquidator – powers and duties – contributories
References:
N.D. Kapoor, Company Law and Secretarial Practice, Sultan Chand, New
Delhi
P.P.S. Gogna, Companies Act, 2013 with Rules –A Text book of Company
Law, Taxmann Publications
M.C. Shukla, & Gulshan, Principles of Company Law, S. Chand & Co.,
New Delhi
Total credits :4
Contact Hours :5
Aim: To familiarize the students with concepts and principles of managing men at
work
Objectives: On completion of the course, the students should be able to learn the
mechanism for effective management of employees at work
MODULE I
Introduction to Human Resource Management
Nature, history, meaning , definition, objectives , importance , functions , process of
HRM – HR Manager – Roles, Duties and Responsibilities – Strategic HRM- HR
policies - Recent trends in HRM
MODULE II
Procurement of Human Resources I
Human Resource Planning- objectives, process, techniques- Labour absenteeism,
Labour turnover- reasons, Job analysis – job description, job specification, Job design
– Job redesign
MODULE III
Procurement of Human Resources II
Recruitment- process, policy, organisation, sources, techniques –web recruitment- The
Employment Exchange(Compulsory Notification of Vacancies) Act - Selection –
process, steps, Tests, types, qualities of good test- Interview- purpose, types, steps,
advantages and limitations, offer letter, promotion-types, transfer-types, competency
mapping
Placement – meaning – Induction
MODULE IV
Developing Human Resources I
Employee training- need, types, assessment of training needs, training programmes,
designing programme, steps, methods and techniques, retraining, training programme
outsourcing
MODULE V
Developing Human Resources II
Executive Development – objectives, need, steps, methods, career planning and
development – Human Resource Development - aspects - Employee empowerment
References:
Total credits :4
Contact Hours :5
Aim :To make awareness among the students regarding retail marketing, the
principles, process and problems
MODULE I
Introduction
Definition- functions of retailer- proximity to consumer- consumerism- global retail
market- issues and challenges- retail as a career- evolution of retail business in India-
different segments
MODULE II
Theories of Retail Development & Business Models
Theories of retail development- concept of life cycle in retail- business models in
retail- non-store retailing- internationalization of retail- reason for failure in
international retail
MODULE III
Retailing Strategy and Planning
Factors affecting the retail shopper- market research- strategy- growth strategy- ethics
in retailing- store selection- types of locations- steps- retail franchising- types-
advantages
MODULE IV
Merchandize Management
Meaning- factors affecting buying function- merchandize planning- merchandize
sourcing- retail pricing- evaluating merchandize performance
MODULE V
Creating, Managing and Sustaining Value in Retailing
Significance of human resource in retail- store operations and profitability- key
components of retail operations- store design and visual merchandizing- servicing the
retail customer- retail marketing and branding- retail management information system-
supply chain management
References:
Swapna Prathan, Retailing Management
Total credits :4
Contact Hours :5
Aim: To enable the students to understand the basic aspects of computer, Page maker
and Ms-Office.
Objective: On completion of the course the students will able to do the word,
PageMaker and PowerPoint presentation.
MODULE 1
Word Processing Package
MS-Word 2007: Introduction; Features- Word User Interface Elements; Creating new
Documents; Basic Editing, Saving a Document; Page Orientation- Viewing
Documents; Setting tabs-Page Margins; Ruler ,Print Preview, Printing a Document
MODULE 2
Formatting Techniques
Font Formatting, Paragraph Formatting; Page Setup; Headers & Footers; Bullets and
Numbered List; Borders and Shading; Find and Replace; Page Break& Page
Numbers; Mail Merging-Spelling and Grammar Checking; Thesaurus; Macros;
Tables; Side-by-side and Nested Tables; Formatting Tables; Drawing; WordArt - E-
mail Editor
MODULE 3
Desktop Publishing
PageMaker 7.0: Introduction to Desktop publishing as a Process- PageMaker tools
and Palettes - Working with objects -type styling options - Working with text -
formatting options: Leading, Margins and indents - Scaling text -Paragraph formatting
options - Working with Grids - Creating frames Layers.
MODULE 4
Presentation Package
Ms-PowerPoint 2007- Features-Components of Power Point 2007(User Interface)-
creating new presentation- inserting slides -adding sounds & videos-formatting slides
- views in presentation – Designing a presentation -background -action buttons- slide
transition- Custom animation - Managing slide shows –Rehearsing Slide show- using
pen - Setting slide intervals
MODULE 5
Network and Communication
Need for networks-Communication Medium(Guided and Unguided)-Data
Communication devices (NIC,Hub,Switch,Repeater,Bridge,Router,Gateway)-Data
Terminal Equipments (Modem, MUX), Types of networks –LAN –MAN –WAN –
Advantages of network –Network topology –Email
References:
Dr. Antony Thomas , Saju Jose, Information Technology for Office, Prathibha
Publishers
Gini Courier & Annette Marquis, Ms-Office 2007, BPB Publications
Uyless Black, Computer Networks Protocols, Standards and Interface, Prentice
Hall India Pvt. Ltd.
Atman Rebecca & Atman Rich, Mastering PageMaker, BPB Publications
SEMESTER IV
SEMESTER IV
Maximum Marks
Duration of Exam in hours
No
External
Internal
Credits
Total
Total 25 100 400 500 20
Total credits :4
Contact Hours :5
Aim: To help the students to have the idea regarding cost concepts, methods and
techniques of cost accounting.
Objective : To enable the students to understand the costing procedures, methods and
techniques for managerial purposes.
Module I
Introduction
Definition- scope – nature – objectives- cost ascertainment – cost accounting and
financial accounting – cost accounting and management accounting – Elements of
cost – preparation of cost sheets
Module II
Materials
Meaning – purchase procedure – purchase control – stores routine – stores control –
economic ordering quantity – maximum level – minimum level – re-ordering level –
pricing of material issues.
Module III
Labour
Labour cost – meaning – classification – methods of wage payment – time rate – piece
rate – differential piece rate – premium and bonus plans
Module IV
Overheads
Meaning, classification – allocation and apportionment – absorption – methods –
under and over absorption – Reconciliation of cost and financial accounts
Module V
Marginal Costing
Meaning – concept of marginal cost statement – profit volume ratio – margin of safety
– break even analysis – cost volume profit analysis – break even charts – preparation
of break even charts
References :
Dr. Maheswari S.N., Financial Accounting, Himalaya Publishing House
M.C.Shukla, T.S.Grewal, S.C.Gupta , Advanced Accounting , S Chand & Co.
S. P. Jain and K. L. Narang, Financial Accounting, Kalyani Publishers
R. L. Gupta, Advanced Accountancy, Sultan Chand & Sons
BM 4 CRT17 Commercial Laws
Total credits :4
Contact hours :5
Aim : To familiarise with important legal aspects directly affecting the business
Module I
The Indian Contract Act, 1872
Sources and importance of commercial law -The Indian Contract Act 1872- Contracts-
Nature-Classification- Essential elements- offer and acceptance- Consideration –
Capacity of parties- Free consent- Coercion- Undue influence- Misrepresentation-
Fraud- Mistake
Module II
Discharge of Contracts
Contingent contracts- Quasi contracts - Discharge of contract - meaning – methods -
Breach of contracts – actual and anticipatory – remedies
Module III
Contracts of Indemnity and Guarantee
Contracts of indemnity - definition – essential elements- nature of liability – rights
and duties of parties. Contracts of guarantee – definition – nature – essential dements -
types of guarantee – rights and duties of parties – discharge
Module IV
Contracts of Bailment and Pledge
Contracts of bailment - definition- nature-essential elements – kinds of bailment rights
and duties of parties – termination. Contracts of pledge -definition – nature – essential
elements – parties – rights and duties of pawnor and pawnee
Module V
Sale of Goods Act, 1930
Essentials of Contract of Sale of Goods - Classification of Goods - Condition and
Warranties - Transfer of Property in Goods - Right of Unpaid Seller - Buyer’s Right
against Seller - Auction Sale
Reference:
Aswathappa K., Business Laws, Himalaya Publishing House
N. D. Kapoor, Business Laws, Sultan Chand Publications, New Delhi
BM 4 CRT18 Compensation & Performance Management
Total credits :4
Contact Hours :5
Aim : On completion of the course the students should be able to understand the
various theories and practices of compensation management.
Objective: The objective is to enable the students to understand the various aspects of
payroll cost management
Module I
Job Evaluation & Performance Appraisal
Job Evaluation - Definition - Traditional and New Techniques - Performance
Appraisal -Basic concepts - performance standard - Appraisal methods
Module II
Compensation Management
Compensation - Definition - Classification – Basic & supplementary compensation-
Types - Incentives - Fringe Benefits
Module III
Wage & Salary Administration
Theories of wages - wage structure - wage fixation - wage payment - salary
administration. Difference between salary and wages - Basis for compensation
fixation- Components of wages - Basic Wages - Overtime Wages - Dearness
Allowance - Basis for calculation - Time Rate Wages and Efficiency Based Wages -
Incentive Schemes - Individual Bonus Schemes, Group Bonus Schemes - Effect of
various labour laws on wages-Preparation of Pay Roll
Module IV
Rewards & Incentives
Rewards for sales personnel - Pay Commission- Performance based pay system -
incentives - Executive compensation plan and packages
Module V
Regulatory Bodies for Compensation Management
Wage Boards - Pay Commissions - Compensation Management in Multi-National
organizations- other bodies
References:
Total credits :4
Contact Hours :5
Aim : To familiarize with the economic trends, concepts, nature of Indian economy
MODULE I
Economic Trends in Business
National income –Concepts-income trends in Indian economy-fundamental economic
concepts of decision making-business cycle-phases-indicators -causes-contra cyclical
policies-impact of economic trends in business- Inflation- deflation
MODULE II
Nature of Indian Economy
India as an emerging economy-types of economy-centrally planned economies,
market & mixed economies-salient features of industrial sector-micro & small
industries-private, public, corporate sectors-Indian multinational companies-salient
features of agricultural sectors-WTO & India- inward & outward foreign investments
MODULE III
Demand Analysis
Meaning, types& determinants- utility – law of diminishing marginal utility–demand
schedule-curve-reasons for the law of demand, assumptions- extension, contraction -
shift, elasticity- degree of price elasticity of demand- measurement- factors
influencing income elasticity-cross elasticity-advertising elasticity- Demand
forecasting –need- types- factors-methods-demand for new products-limitations- steps
MODULE IV
Supply Analysis
Factors affecting supply – law - supply schedule – curve - extension and contraction -
shift-elasticity-demand-supply equilibrium
MODULE-V
Competition Analysis
Perfect competition- characteristics-concept of equilibrium price-price determination.
imperfect competition-monopoly-characteristics- price determination- price
discrimination. Monopolistic competition – characteristics- price and output
determination. oligopoly –characteristics- price determination. Kinked demand
theory-price leadership model-pricing under collusion. Dupoly-monopsony- bilateral
monopoly- oligopsony
Note on course work: This course can be taught in the lecture method supplemented
with assignments and seminars
References:
Varshney, R.L., & Maheshwari, K.L., Managerial Economics, Sultan Chand &
Sons Private Ltd.
Mehta, P. L., Managerial Economics, Sultan & Chand, New Delhi
Trivedi, M.L., Managerial Economics Theory and Applications, McGraw Hill
Education Private Ltd, New Delhi
Dwivedi, D. N., Managerial Economics, Vikas Publishing House Private
Limited, New Delhi
Chopra P.N., Principles of Business Decisions, Kalyani Publishers
BM 4 CMT20 Computerised Accounting
Total credits :4
Contact Hours :5
Objective : On completion of the course the students will able to understand the
computerised accounting practices and to carry out the accounting practices as per the
requirements of different organisations
MODULE I
Excel 2007 Introduction
Ms-Excel 2007 Introduction, Advantages of electronic spreadsheet-Excel User
Interface, Creating Workbook based Installed Templates-Working with cell and cell
addresses, Selecting a Range, Moving, Cut, Copy, Paste, Inserting and Deleting cells,
Freezing cells, Adding, Deleting and Copying Worksheet within a workbook,
Renaming a Worksheet. Cell Formatting Options, Formatting fonts, Aligning,
Wrapping and Rotating text, Using Borders, Merge and Center, Auto fill, Creating
Custom list, Changing row/column height / width, Insert Comments, Clear contents in
a cell, Margin and Orientation, Using header and footer , Sorting Data, Using print
Preview, Preparing Worksheet for the printer, Selecting Print Area, , Centering a
Worksheet, , Inserting page breaks
MODULE II
Advanced Features of Excel
Functions in excel, Using Logical Functions-IF-AND-OR-NOT-TRUE-FALSE,
Statistical functions-AVERAGE-MEDIAN-MODE-STDEV-COUNT-MAX-MIN,
Mathematical Functions -SUM-ROUND-FACTORIAL-INT-EXP-POWER-MOD,
Text Functions-UPPER-LOWER-EXACT-LEFT-RIGHT-LEN-MID-PROPER- .
Linking Data between Worksheet, Elements of Excel Charts, Categories, Create a
Chart, Choosing chart type, Edit chart axis - Titles, Labels, Data series and legend,
Adding a text box, Rotate text in a chart, Converting a chart on a web page, Saving a
chart. Use of Pivot tables- Designing of Templates in Excel
MODULE III
Computerized Accounting - Tally
Introduction - Features of Computerized Accounting - Advantages of Computerized
Accounting - Limitations of Computerized Accounting - Features of Tally - Need for
Tally - Technological Advantages
MODULE IV
Tally Fundamentals and Processing Transactions
Getting functional with Tally - Tally Start-up - Tally screen components - Mouse /
Keyboard Conventions -- Switching between Screen Areas - Quitting Tally. Creation /
Setting up of a Company in Tally - F11 Features - F12 Configure – Creating account
Groups-Creating Ledger Accounts- Voucher Configuration-Accounting vouchers in
Tally
MODULE V
Generating and Printing Of Accounting Reports
Introduction - Financial Reports in Tally - Balance Sheet - Profit and Loss Account -
Account Books - Group Summary - Group Vouchers - List of Accounts.
References:
Maximum Marks
Duration of Exam in hours
No
External
Internal
Credits
Total
BM 5 Foundations of Individual Core 5 3 20 80 100 4
CRT21 Behaviour
Total credits :4
Contact Hours :5
Aim: To empower the students by imparting knowledge on the formulation of
individual behaviour
Objectives: On completion of the course, the students should be able to realize the
reasons for individual differences
MODULE I
Introduction to Organisational Behaviour
Meaning and Definition – Characteristics – Elements – Evolution of OB -Approaches-
Models of OB- Challenges and opportunities
MODULE II
Individual Behaviour
Foundations of individual behaviour- Personality – concept, determinants, types,
theories, personality development, measurement of personality, personality and OB
Perception- meaning, process, factors affecting perception, steps for effective
perception, impression management, perception and OB
Attitudes, values and job satisfaction
MODULE III
Learning
Meaning, determinants, theories, principles, Learning and OB
MODULE IV
Motivation
Meaning, process, theories, motivational selectivity, incentives-Goal setting –
morale- case study analysis.
MODULE V
Leadership
Meaning, Functions, leadership styles, theories, steps to effective leadership,
transactional and transformational leadership- case study analysis
References:
Total credits :4
Contact Hours :5
Aim : To provide the students idea regarding market and marketing activities
Objective : Students should be able to understand the marketing activities and the
various factors influencing the marketing process
MODULE I
Introduction
Marketing – meaning – definition – significance – evolution – objectives – concepts –
basic features – market – selling – current trends and waves in marketing – benefits of
marketing – marketing management – functions in marketing processes – marketing
functions.
MODULE II
Market Segmentation
Meaning – benefits – costs – bases – approaches – requisites. Target marketing –
meaning – strategies – market integration and orchestration –Product positioning –
meaning – alternatives – determinants – steps – errors. Consumer behaviour –
meaning – determinants – steps – errors. Consumer behaviour – meaning – consumer
buying process – determinants of consumer behaviour – buying motives – meaning –
classification – characteristics – importance
MODULE III
Marketing Mix
Meaning –elements -Product planning – definition – objectives – product
characteristics – product classification – product portfolio – product line – product
positioning – product life cycle. New product development – need – meaning –steps
Branding – merits – market redefinition – rand equity approaches – product packaging
– objectives – functions – essentials – strategies. Product labelling – purpose – after
sales service
MODULE IV
Product Pricing
Meaning – role – influencing factors – methods – policies and strategies – resale price
maintenance.
MODULE V
Channel of Distribution
Meaning – role – classification – types of intermediaries – factors influencing
channels of distribution – factors governing the choice of an intermediary – Direct
marketing – meaning – methods – merits and demerits.
References:
Credits :4
Hours :6
MODULE I
Unit 3: Ecosystems
Concept of an ecosystem - Structure and function of an ecosystem - Producers,
consumers and decomposers - Energy flow in the ecosystem - Ecological succession -
Food chains, food webs and ecological pyramids - Introduction, types, characteristic
features, structure and function of the given ecosystem:- Forest ecosystem
MODULE II
Unit 1: Biodiversity and its conservation
Introduction - Biogeograhical classification of India - Value of biodiversity:
consumptive use, productive use, social, ethical, aesthetic and option values.
India as a mega-diversity nation - Hotsports of biodiversity - Threats to biodiversity:
habitat loss, poaching of wildlife, man-wildlife conflicts - Endangered and endemic
species of India
MODULE III
SUSTAINABLE ENVIRONMENT
Definition – scope – implementation – Control Boards – Management - Issues
MODULE IV
SUSTAINABLE DEVELOPMENT
Meaning – scope – implementation – components – Agencies - Management - Issues
MODULE V
Unit 1- Human Rights– An Introduction to Human Rights, Meaning, concept and
development, Three Generations of Human Rights (Civil and Political Rights;
Economic, Social and Cultural Rights)
Unit-2 Human Rights and United Nations – contributions, main human rights
related organs - UNESCO, UNICEF, WHO, ILO, Declarations for women and
children, Universal Declaration of Human Rights
Human Rights in India – Fundamental rights and Indian Constitution, Rights for
children and women, Scheduled Castes, Scheduled Tribes, Other Backward Castes
and Minorities
Unit-3 Human Rights and environmental rights - Right to Clean Environment and
Public Safety: Issues of Industrial Pollution, Prevention, Rehabilitation and Safety
Aspect of New Technologies such as Chemical and Nuclear Technologies, Issues of
Waste Disposal, Protection of Environment
Conservation of natural resources and human rights: Reports, Case studies and
policy formulation. Conservation issues of western ghats- mention Gadgil committee
report, Kasthurirangan report. Over exploitation of ground water resources, marine
fisheries, sand mining etc.
Internal:Field study
Visit to a local area to document environmental grassland/ hill /mountain Visit a local
polluted site – Urban/Rural/Industrial/Agricultural Study of common plants, insects,
birds. Study of simple ecosystem-pond, river, hill slopes, etc.
Gleick, 11.P.1993 Water in crisis, Pacific Institute for Studies in Dev. Environment &
Security. Stockholm Environment Institute Oxford University Press 473p
Heywood, V.H & Watson, R.T. 1995. Global Biodiversity Assessment, Cambridge
University Press 1140p
Jadhav.H & Bhosale.V.M. 1995. Environmental Protection and Laws. Himalaya Pub.
House, Delhi 284p
Mekinney, M.L & Schock.R.M. 1996 Environmental Science Systems & Solutions.
Web enhanced edition 639p
Mhaskar A.K., Matier Hazardous, Techno-Science Publications (TB) Miller T.G. Jr.,
Environmental Science, Wadsworth Publishing Co. (TB) Odum.E.P 1971.
Fundamentals of Ecology. W.B. Saunders Co. USA 574p Rao.M.N & Datta.A.K.
1987 Waste Water treatment Oxford & IBII Publication Co.Pvt.Ltd.345p
Total credits :4
Contact Hours :5
Aim – To enable the students to understand the various provisions regarding the
computation of taxable income of various persons and the exemptions and deductions
available to different categories of persons.
Objective : On completion of the course the students will be able to understand the
manner in which the taxable income of a person is computed under different heads.
MODULE I
Introduction
Brief History of Income tax in India - Basic Concept Finance Act- Definition of
Income,Gross Total Income, Total Income, Assessee, Assessment Year, Average Rate
of Tax, Maximum Marginal Rate, Previous Year, Person- Finance Act- Agricultural
Income- Partly Agricultural Income - Clubbing of agricultural income with non
agricultural income (Integration)- Rates of Income Tax - Accelerated Assessment
Capital and Revenue
MODULE II
Residential Status
Incidence of tax -Income Exempt from tax, Various Heads of Income .
MODULE III
Income from salary
Chargeability- Definition -Perquisites Profit in lieu of salary- deductions from salary-
Provident funds and treatment -Computation of income from salary.
MODULE IV
Income from House Property
Basis of Charge- Deemed ownership -Income from House property exempt from tax
Annual value determination in various cases- Deductions permissible -Unrealised rent
and recovery of unrealized rent and arrears of rent -Computation of Income from
House Property.
MODULE V
Profits and Gains of Business or Profession
Chargeability -Deductions expressly allowed (a brief study expected) General
Deductions -Basic concepts relating to calculation of permissible depreciation and
related concepts -Expenses/Payments not deductible under certain circumstances -
Expenses allowed on actual payment basis only deemed profits U/S 41 -Computation
of Profits and Gains of business or profession.
References:
Total credits :3
Contact Hours :4
Aim :To familiarize with modern banking practices and new trends in banking
MODULE I
Banker and Customer
Banker-Customer-Relationship between banker and customer-general and special
relationship. Special types of customers – Minors – Insolvents – Lunatics – Married
women – Pardanashin woman – illiterate person – Joint accounts – Partnership firm –
joint stock companies – Trustees – Clubs and Charitable Societies
MODULE II
Types of Accounts
Fixed – Savings – Current –– Recurring – Senior Citizens – No frill Account- Student
accounts – NRE- -CASA product-Overdraft – Cash Credit-loans
MODULE III
Negotiable Instruments
Cheque – bill of exchange – promissory note – crossing – types-endorsement – types-
collecting banker – paying banker
MODULE IV
Reforms in Banking Sector
MODULE V
Financial Supermarkets
Bank Assurance – Treasury Products – Spot – Forward –Swap –Money market
products – Call money – Notice money – Term Money – Commercial Papers –
Certificate of Deposit
Note on course work: The course can be taught in the lecture method supplemented
with field visits, assignment and seminars.
References:
Maximum Marks
No
External
Internal
Credits
Total
BM 6 Group Dynamics & Core 5 3 20 80 100 4
CRT26 Organisational
Change
Course BM 6 PRP35
Internal Evaluation
For Course BM 6 PRP35 Case Study Development and Analysis / Project Report, the
internal marks should be distributed as follows:
Internal viva-voce examination:10 marks
Presentation: 5 marks
Punctuality: 5 marks
External Evaluation
Instead of external University theory examination, external viva-voce examination should be
conducted.
BM 6 CRT26 Group Dynamics & Organizational Change
Total credits :4
Contact Hours :5
Aim: To create awareness among the students the need for group initiatives and the
relevance of group dynamics
Objectives: On completion of the course the students should be able to understand the
role of group dynamics in organisational development and effectiveness
MODULE I
Group Behavoiur
Meaning-Definition-Types of groups-Theories on group formation-Stages of group
development- Group norms, group cohesion, group role- Inter-group behaviour and
conflicts- Group decision-making, techniques-Quality circles
MODULE II
Conflict Management
Conflict-meaning, definition – Sources of conflict – Types-Aspects-Process-Conflict
management – Case study analysis Job frustration-sources, behavioural effect,
managing frustration Stress - symptoms, sources, measurement, Stressors,
consequences, stress management
MODULE III
Organisational Analysis
Organisation – Meaning, characteristics, types, organisational goals, organisational
structure-elements, types, structural differences- Influence of structure on employee
behaviour Power and politics – sources of power- reasons for organisational politics,
managing politics – Organisational culture- Case study analysis
MODULE IV
Organisational Change and Development
Need for change- Types of change- Planned change- Lewin’s Change Model –
Resistance to change – Managing resistance Organisational Development – OD
models – OD interventions – MBO, QWL, Team building, Process consultation, Grid
training, Transactional analysis
MODULE V
Organisational Effectiveness
Definition- Approaches – Factors influencing OE – Case study analysis
References:
Total credits :4
Contact Hours :5
MODULE I
Introduction
Nature & scope of investment management- financial and economic – meaning of
investment –importance of investment-factors favorable for investment – investment
media – features of investment program
MODULE II
Financial Institutions
Financial Institution and markets in India and development – structure of financial
markets – Money market – Capital market – Primary Market – Marketing of securities
MODULE III
Stock Market
Stock Markets in India – Regulatory Framework – Role and functions – procedure
for trading in securities – kinds of brokers - OTC
MODULE IV
Investment Alternatives
Alternate forms of investment – Government securities – Types – Life Insurance –
Kinds of policies – Procedure for taking of policies – Investment in Units – different
schemes – objectives of investment units – tax benefits – provident funds – national
saving schemes – post office saving – investment in land – gold – silver- diamond –
stamps – antiques – banks
MODULE V
Investment Companies
Note on course work: lectures with assignments, field visits and seminars,
assignments
References:
Investment management : John Bowyer
Total credits :4
Contact Hours :5
Aim : To introduce the area of advertisement and sales management to the students
Objective: to completion the students will be familiar with the advertisement practice
and sales management programmes of business corers
MODULE I
Advertising
Meaning – publicity and advertising – role and limitations – advertisability –
advertising management – appropriation – media – affecting factors – media mix –
media scheduling – the unique selling proposition (USP) – advertising copy – lay out
– evaluation
MODULE II
Sales Promotion
Meaning – objective – role – limitations – trools – budget – promotion mix
MODULE III
Marketing Research
Meaning - features – objectives – scope – role – limitations – procedure – methods –
techniques – external research – merits – limitations – motivation research –
techniques – strengths and weakness
MODULE IV
Marketing Strategy
Meaning – nature – essentials – strategy and tactics – two level strategies -
classification of strategies – based on PLC stages – based on market share – market
leader strategies – market challenger strategies – follower strategies – richer strategies
– recession strategies
MODULE V
Sales Management
Salesmanship – meaning – features – importance and scope – advantage – benefits –
limitations – effective selling – types of customers – buying – motives and habits –
sales process – qualities of a good salesman –sales organisation – meaning –
importance – sales manager – kinds – duties and responsibilities – qualities –
management of sales force – recrintment and selection – training – compensation –
supervision and direction – motivation =- control and evaluation – sales forecast –
meaning – methods
References:
Credits :4
Contacts hours :5
Module I
Introduction
Basic concept of strategy and strategic management – strategic management process –
vision-mission – objectives – goals- strategic levels of an organization – SBU
Module II
Environmental analysis
Definition - Concept of environment – micro and macro environment – environmental
scanning-models for environmental analysis – value chain analysis
– SWOT analysis – BCG matrix – GE’s spot light matrix –TOWS Matrix
Module III
Strategic Planning and formulation
Meaning -Stages of strategic planning– need and importance of strategic planning-
benefits – strategic choice – process- criteria
Module IV
Strategy implementation
Meaning -approaches – process of strategy implementation - factors influencing
successful implementation – barriers to implementation
Module V
Strategic control
Meaning – need for strategic evaluation and control - operational control - types–
essentials of evaluation and control system- control process- control techniques
Reference:
Total credits :4
Contact Hours :5
MODULE I
Introduction
Production Management – meaning – definition – functions – production system –
responsibilities of production manager – manufacturing systems – intermittent –
continnous.
MODULE II
Production Planning and Control
Meaning – objectives – importance procedures – routing scheduling – loading.
Production Control – definition – necessity – objectives – affecting factors –
techniques – programming – ordering – dispatching – progressing – inventory control.
Advantages of production control. Product Design – meaning – affecting factors –
characteristics – Product development – meaning – necessity – tools – standardisation
– simplification – diversification – automation in business organisation.
MODULE III
Plant Location and Layout
Plant location – meaning – importance – nature – responsible factors. Plant layout –
meaning – objectives – advantages types – line or product – process or functional
stationary – Tools and techniques of plant layout – features of a good layout.
MODULE IV
Materials & Maintenance Management
Materials management – meaning – objectives – centralised and localised purchasing
– functions of purchase department – store keeping – functions of store keeper –
methods of pricing – issues – plant maintenance – meaning – importance - objectives
– functions of maintenance management – types of plant maintanence.
MODULE V
Productivity & Quality Control
Productivity – definition – importance – affecting factors – measurement – improving
techniques – work study – meaning -techniques - quality control – meaning –
objectives – phases – steps – inspection – functions – objectives – steps – acceptance
– sampling or sampling inspection
References:
Total credits :4
Contact Hours :5
MODULE I
Introduction
Meaning, definition, importance, objectives, scope. Finance function –definition,
approaches, scope, nature. Financial decisions - Financial planning- objectives, scope,
importance. Financial manager’s role
MODULE II
Sources of Finance
Types: ownership securities- equity shares, preference shares. Creditorship securities-
debentures. internal financing. Loan financing - short term loans, term loans- bridge
finance-book building-new financial instruments
MODULE III
Capitalisation and Capital structure
Capitalisation – meaning, theories - over capitalization- causes, effects, remedies.
Under capitalisation, causes, effects, remedies, Fair capitalization, watered capital.
Capital structure –meaning,theories. optimum capital structure- features-determinants.
Capital gearing, leverages.
MODULE IV
Working Capital Management
Concepts- need- kinds-determinants-sources - management of working capital
Cash, Receivables &Inventory management –meaning, objectives & significance only
MODULE V
Dividend Decision
Meaning, Approaches- Irrelevance theory- Modigliani and Miller approach, relevance
theory- Walters approach, Gordon’s approach - Determinants of dividend policy-
forms of dividend- bonus issue- stock split- buyback of shares
References:
Objective:
To know about the importance of Industrial Relations in the global perspective
To be aware of the role of employer’s organization
MODULE I
Introduction to Industrial Relations
MODULE II
Worker & Employer Organisations
Trade Union Act, 1926 - Workers Organisation- Characteristics- Need for unions -
Types of Unions – Functions and Problems of Trade unions - Employers Organisation
– role – Structure
MODULE III
Collective Bargaining
Meaning-Definition – objectives-importance to employers, employees and
management- types- mechanism- collective bargaining in India- reasons for failure-
suggestions for making collective bargaining effective
MODULE IV
Workers’ Participation in Management
MODULE V
Workers Welfare and Education
References:
Total credits :4
Contact Hours :5
MODULE 1
Stages of Evolution of GST
Methodology of GST - CGST - SGST - IGST - Important concepts and definitions-
GSTN
MODULE 2
Levy and Collection of Tax
Scope of Supply - Composite and Mixed Supplies- Levy and Collection - Time of
Supply of Good s- Time of Supply of Services - Input Tax Credit - Recovery of Credit
- Tax Invoice - Unauthorised Collection of Tax - Credit Notes - Debit Notes -
Accounts and Records.
MODULE 3
Registration
Returns And Payment of Tax - Persons Liable for Registration - Compulsory
Registration - Deemed Registration- Procedure For Registration - Amendment of
Registration - Cancellation of Registration - Returns - Furnishing Details of Supplies -
Payment of Tax, Interest, Penalty - Tax Deduction At Source - Collection of Tax At
Source – Refunds
MODULE 4
Assessment
Types - Audit Inspection - Search - Seizure - Inspection of Goods in Movement -
Power of Authorities - Demands And Recovery - Fraud and Suppression of Facts -
Liabilities - Provisional Attachment.
MODULE 5
Appeals
Appellate Authorities - Powers - Procedure - Appeal to High Court -Supreme Court -
Offences and Penalties.
All the provisions in the Central GST, State GST and Integrated GST Acts and Rules as
amended up to date will be applicable
Reference:
Vinod K Singania, Indirect Taxes, Taxmann’s Publications, New Delhi
H.C Mehrotra, Indirect Taxes, Sahitya Bhavan Publications, New Delhi
Optional Paper II
Total credits :4
Contact Hours :5
Aim: To familiarize the students with the assessment procedure practices and
computation of income tax.
Objectives: On completion of the course the students should be able to work out the
computation of tax and the procedures and practices to be followed.
MODULE I
Capital Gains
Basis of charge -Capital Assets –Kinds- Computation of Short term and Long term
capital gains- Computation of capital gain in following special cases a) Conversion of
capital asset into stock in trade b) Transfer of capital asset by a partner/member to a
firm, AOP, BOI c) Compensation on compulsory acquisition of assets and also
enhanced compensation d) Right share and Bonus shares e) Converted
shares/debentures - Capital Gains exempt from tax- Capital Gains Account Scheme -
Computation of Income from Capital Gain
MODULE II
Income from other Sources
General chargeability- specific chargeability- kinds of securities & grossing up of
interest-- Bond washing transaction –Computation-- Deductions allowed -Deduction
not permitted- Computation of income under the head Income from other source
MODULE III
MODULE IV
Income Tax Authorities
Various Income Tax authorities - Powers and Functions
MODULE V
Assessment
Assessment procedure - various types of Return of Income - Return through TRP –
PAN - Types of Assessment - Tax deducted at source- (brief study only; problems
excluded) TCS -TAN - A brief study on areas (a) Advance payment of tax (b) Refund
(c) Recovery of tax (d) Tax Clearance Certificate Assessment of individuals and
computation of Tax
References :
Dr. Vinod K. Singhania & Monica Singhania, Students Guide to Income Tax,
Taxmann Publications
Dr. H. C. Mehrotra & Dr. S. P. Goyal, Direct Taxes Law and Practice, Sahitya
Bhawan Publications