Proximity Sensors SMT/SME-8, For T-Slot: Look For The Star!

Proximity sensors SMT/SME-8, for T-slot
q/w Festo core product range qReady for dispatch from the Festo factory in 24 hours
Covers 80% of your automation tasks Held in stock in 13 service centres worldwide
More than 2200 products
Look for the star!
Worldwide: Always in stock wReady for dispatch in 5 days maximum from stock
Superb: Festo quality at an attractive price Assembled for you in 4 service centres worldwide
Easy: Reduces procurement and storing complexity Up to 6 x 1012 variants per product series
Proximity sensors SMT/SME
Product range overview
Design Type of mounting Measuring principle Type Operating voltage Switching output Switching ele è Page/
range ment function Internet
For T-slot Standard
Insertable in the slot Magneto-resistive SMT-8M-A 5 … 30 V DC PNP N/O contact 7
from above, flush with N/C contact
the cylinder profile NPN N/O contact
Non-contacting, N/O contact
2-wire
Insertable in the slot Magnetic reed SME-8M 5 … 30 V AC/DC Contacting, bipolar N/O contact 15
from above, flush with
N/C contact
the cylinder profile
Insertable in the slot Magnetic reed SME-8 12 … 30 V AC/DC Contacting, bipolar N/O contact 31
lengthwise, flush with N/C contact
the cylinder profile 3 … 230 V AC/DC N/O contact 35
Insertable in the slot Magneto-resistive SMT-8G 10 … 30 V DC PNP, NPN N/O contact 38
lengthwise Magneto-resistive SMT-8-SL 10 … 30 V DC PNP N/O contact 27
Magnetic reed SME-8-SL 10 … 30 V AC/DC Contacting, bipolar N/O contact 31
Insertable in the slot Magnetic reed SME-8-FM 10 … 30 V AC/DC Contacting, bipolar N/O contact 45
from above
Via accessories Magneto-resistive SMTO-8E 10 … 30 V DC PNP N/O contact 54
NPN
Magnetic reed SMEO-8E 12 … 30 V DC Contacting, bipolar N/O contact 59
3 … 250 V DC
3 … 230 V AC
Corrosion-resistant
Insertable in the slot Magneto-resistive CRSMT-8M 5 … 30 V DC PNP N/O contact 23
from above, flush with
Insertable in the slot Magneto-resistive CRSMT-8 10 … 30 V DC PNP N/O contact 27
lengthwise, flush with
Welding field immune

Insertable in the slot Magneto-resistive SDBT-BSW 10 … 30 V DC PNP N/O contact 48
from above, secured NPN
with screw Non-contacting,
2-wire
Via accessories Magneto-inductive SMTSO-8E 10 … 30 V DC PNP N/O contact 54
NPN
Heat resistant up to 120 °C

Insertable in the slot Magnetic reed SME-8-…-S6 0 … 30 V AC/DC Contacting, bipolar N/O contact 35
lengthwise, flush with
Via accessories Magnetic reed SMEO-8E-…-S6 0 … 30 V DC Contacting N/O contact 59
0 … 30 V AC
To EU Explosion Protection Directive (ATEX)

Clamped in T-slot Magneto-inductive SMT-8F-I-… 8.2 V DC NAMUR NAMUR 42
2 è Internet: www.festo.com/catalogue/... Subject to change – 2017/04

Proximity sensors SMT/SME
Product range overview
Design Type of mounting Measuring principle Type Operating voltage Switching output Switching ele è Page/
range ment function Internet
For C-slot Standard
Insertable in the slot Magneto-resistive SMT-10M 10 … 30 V DC PNP N/O contact C-slot
from above, flush with NPN
the cylinder profile Non-contacting,
2-wire
Magnetic reed SME-10M 5 … 30 V AC/DC Contacting, bipolar N/O contact
Insertable in the slot Magneto-resistive SMT-10G 10 … 30 V DC PNP N/O contact
lengthwise Magnetic reed SME-10 12 … 27 V AC/DC Contacting N/O contact
T-slot sensors can be used for drives with T-slot

Exceptions
DFM-B: SMTO-8E, SMTSO-8E, SMEO-8E, SMPO-8E
cannot be used
DHDS: SME-8M can only be used on  50
DHPS: SME-8M can only be used on  20 … 35
HGDD-63-A: SMT-8M-A cannot be used
HGPT-B: SMT-8G can only be used from size 40
upwards
SDBT-BSW- … -PU/NU can only be used on a limited
number of drive series. Page è 48
C-slot sensors can be used for drives with C-slot

Exceptions
ADVC  100: SMT-10M and SME-10M cannot be
used (ADVC has a T-slot and C-slot)
DSM/DSM-B-6/8/10: SME-10M cannot be used
DSM/DSM-B-10/16: SMT-10M cannot be used
HGPT-B: SMT-10G can only be used up to size 35
For drives with sensor rail: these are available with 2 cylinder barrel contours
Only T-slot sensors CRSMT-8M and SMT-8M-A can be used, and only with the profile identified below as being suitable
Example: DSBF Example: CDC
Suitable Not suitable
2017/04 – Subject to change è Internet: www.festo.com/catalogue/... 3

Peripherals overview
1 bC
3 bD
4 aD
bD
bH
5
aE
bD
aA
aF bE
6
7 aG
bF
8
aH
aB
9
bF
aI 4
bA
aC
bD
bG
aD
bE
bJ
bF
aH
aJ
bB

Peripherals overview
Mounting components and accessories è Page/ Mounting components and accessories è Page/
Internet Internet
Proximity sensor Mounting kits and accessories
1 SMT-8M-A-…, with cable 7 aD Mounting kit SMBR-8-8/100-S6, heat-resistant 63
2 SME-8M-…-OE, with cable 15 aE Mounting kit SMBR 63
3 SME-8-FM-…-K-…, with cable 45 aF Mounting kit CRSMB, corrosion-resistant 64
CRSMT-8-K-…, with cable, corrosion-resistant 27 aG Mounting kit SMB-8-FENG 64
4 CRSMT-8M-…, with cable 23 aH Mounting SMBZ-8-… 66
5 SMT-8G-…-OE, with cable 39 aI Sensor bracket DASP-M4-… 65
6 SME-8M-…-M…, with cable and plug connector 15 bJ Mounting kit SMB-8E 64
7 SMT-8-SL-…, with plug connector 27 bA Mounting kit SMB-8-C 65
SME-8-SL-…, with plug connector 31 bB Sensor tester SM-TEST-1 67
8 SME-8-S-…, with cable and plug connector 31 – Position marker SMM-8 66
9 SMT-8G-…-M…, with cable and plug connector 39 – Clip SMBK-8 67
aJ SMTO/SMTSO, with plug connector 54 – Inscription label ASLR 67
SMEO-8E, with cable or plug connector 59 – Safety clip NEAU 67
aA SDBT-BSW, welding field immune 48
Drives
Connecting cables bC Drives with T-slot –
aB NEBU-M…G… 67 bD Round cylinders –
aC NEBU-M…W… 67 bE Standard cylinders DSBC –
bF Drives with tie or mounting rod
bG Standard cylinders DSBF –
bH Hinge cylinders DFAW –

Proximity sensors SMT-8M-A, for T-slot
Type codes
SMT-8M-A
SMT-8M — A — PO — 24V — E — 0,5 — N — OE —
Function
SMT-8M Proximity sensor, magneto-resistive,
for T-slot, insertable in the slot from above
Series
A Short design
Switching output
PS PNP, N/O contact, 3-wire
PO PNP, N/C contact, 3-wire
NS NPN, N/O contact, 3-wire
ZS N/O contact, 2-wire
PNS PNP, NPN switchable
PSO PNP, N/C contact, N/O contact switchable
Rated operating voltage

24V 24 V DC
Cable characteristics
E Energy chain + robot
Cable length [m]
Cable designation
– With inscription label holder
N Without inscription label holder
Electrical connection
OE Open end
M8 Cable with plug M8x1, snap-on flange
M8D Cable with plug M8x1, rotatable thread
M12 Cable with plug M12x1, rotatable thread
EU certification
Ex2 II 3GD in accordance with EU Directive 2014/34/EU

Technical data – Magneto-resistive
Function Magneto-resistive measuring

e.g. PNP, N/O contact, with cable principle
Insertable in the slot from above,
does not protrude over the cylinder
profile
Cable clip and inscription labels
e.g. NPN, N/O contact, with cable included in the scope of delivery
Variant EX2 for use in potentially
explosive areas in zones 2 and 22
General technical data

Design For T-slot
Assembly position Any
Based on standard EN 60947-5-2
Approval certificate c UL us - Listed (OL)
RCM trademark
CE marking (see declaration of conformity) To EU EMC Directive
Note on materials Cable halogen-free, oil-resistant
RoHS-compliant, free of copper and PTFE
Input signal/measuring element

Measured variable Position
Measuring principle Magneto-resistive
Ambient temperature [°C] –40 … +85
Switching output
Type PS NS PO ZS PNS PSO
Switching output PNP NPN PNP Non-contacting, PNP, NPN PNP
2-wire switchable
Switching element function N/O contact N/O contact N/C contact N/O contact N/O contact N/C contact,
N/O contact
switchable
Repetition accuracy [mm] ±0.1
Switch-on time [ms]  1.3  1.0
Switch-off time [ms]  1.4  1.0
Max. output current [mA] 1001) 100 1) 100 1) 801) 100 100
Max. output current in mounting [mA] 100 801) 100
kits
Max. switching capacity DC [W] 2.8 2.8 2.8 1.9 2.7 2.7
Max. switching capacity DC in [W] 2.82) 2.82) 2.82) 1.52) 2.7 2.7
mounting kits
Max. switching frequency [Hz] 180
Voltage drop1) [V]  1.5 6  2.5
1) Variant …-PS/NS/PO-…-Ex2: max. output current in mounting kits 80 mA, Ta 70 °C

Variant …-ZS-…-Ex2: max. output current in mounting kits 50 mA, Ta 70 °C
2) Variant …-PS/NS/PO-…-Ex2: max. switching capacity 2.2 W
Variant …-ZS-…-Ex2: max. switching capacity 1.2 W
Output, additional data

Protection against short circuit Pulsed
Overload protection Yes

Electronic components
Type PS, NS, PO, ZS PNS, PSO Ex2
Operating voltage range [V DC] 5 … 30 7 … 30 5 … 30
Rated operating voltage [V DC] 24
Reverse polarity protection For all electrical connections
Electromechanical components
Electrical connection M8 M8D M12 OE
Electrical connection Cable with plug, 3-pin Cable, 3-wire
M8x1 M12x1 Cable, 2-wire
– Rotatable thread
Connection direction In-line
Cable test conditions Energy chain: 5 million cycles, bending radius 28 mm
Torsional strength: > 300,000 cycles, ±270°/0.1 m
Resistance to bending: according to Festo standard; test conditions on request
Cable length [m] 0.1 … 30
Cable characteristics Energy chain + robot
Cable sheath materials TPE-U(PUR)
Cable sheath colour Grey
Mechanical components
Electrical connection M8, M8D, M12 OE
Type of mounting Screw-clamped, insertable in the slot from above
Max. tightening torque [Nm] 0.6
Housing Black
PA reinforced
High-alloy stainless steel
Nickel-plated brass –

Display/operation
PS, NS, PO, ZS PNS PSO
Switching status indication Yellow LED Yellow LED (for PNP)/white LED (for Yellow LED (for N/O contact)/white
NPN) LED (for N/C contact)
Operating reserve indication Orange LED –
Immissions/emissions
Ambient temperature with flexible [°C] –20 … +85
cable installation
Degree of protection IP65, IP68, IP69K
ATEX
SMT-8M-A-…- Ex2
ATEX category for gas II 3G
Explosion ignition protection type for gas Ex nA IIC T4 X Gc
ATEX category for dust II 3D
Explosion ignition protection type for dust Ex tc IIIC T120 °C X Dc
Explosion-proof temperature –40 °C <= Ta <= +70 °C
Explosion protection Zone 2 (ATEX)
Zone 22 (ATEX)
CE marking (see declaration of conformity) To EU Explosion Protection Directive (ATEX)
Pin allocation to EN 60947-5-2

M8x1, 2-pin M12x1, 2-pin
N/O contact N/O contact
Pin Wire colour Allocation Pin Wire colour Allocation
1 Brown + 1 Brown +
4 Black – 4 Black –

N/O contact and N/C contact N/O contact
1 Brown + 1 Brown +
3 Blue – 3 Blue –
4 Black Output 4 Black Output

M12x1, 3-pin
N/C contact
Pin Wire colour Allocation
1 Brown +
3 Blue –
2 White Output

Dimensions Download CAD data è www.festo.com

SMT8MA-24V-E-…-… (PS, NS, PO, ZS)
Yellow LED for safe switching status. 1 Yellow LED
Yellow and orange LED for unsafe 2 Orange LED
switching status. 3 Position of sensor element
centre
4 Tightening torque of clamping
component 0.6 Nm
SMT8MA-24V-E-…-… (PNS, PSO)

Switching status indication for PNS: 1 Yellow LED
Yellow LED for PS switching output. 2 White LED
White LED for NS switching output. 3 Position of sensor element
centre
Switching status indication for PSO: 4 Slot for screwdriver
Yellow LED for PS switching output.
White LED for PO switching output.
Type B1 H1 L3 L4 ß1
SMT8MA-…-24V-E- (PS, NS, PO, ZS) 29.3 26.3
5 4.6 1.5
SMT8MA-…-24V-E- (PNS, PSO) 34.8 31.8


SMT8MA-…-OE/OE-Ex – Cable
5 Inscription label holder drawn

turned by 90°
6 Connecting cable
L1 Cable length
SMT8MA-…-M8D – Cable with plug M8x1, rotatable thread

turned by 90°
6 Connecting cable
7 Plug suitable for connecting
cable NEBU-M8
L1 Cable length
SMT8MA-…-M8 – Cable with plug M8x1, snap-on flange

turned by 90°
6 Connecting cable
cable NEBU-M8
L1 Cable length
SMT8MA-…-M12 – Cable with plug M12x1, rotatable thread

turned by 90°
6 Connecting cable
cable NEBU-M12
L1 Cable length
Type D1 D2 D3 L2 L5 ß1

SMT-8M-A-…-OE – – 50
SMT-8M-A-…-OE-Ex – – 50
SMT-8M-A-…-M8D 2.9 9.6 M8x1 41.1 23 1.5
SMT-8M-A-…-M8 8.5 M8x1 32.7
SMT-8M-A-…-M12 15 M12x1 54.5

qCore product range

Ordering data
Switching Electrical connection Cable Weight Part No. Type
output Cable Cable with plug, length
rotatable thread
M8x1 M12x1 [m] [g]
N/O contact
PNP – 3-pin – 0.3 8.9 q574334 SMT-8M-A-PS-24V-E-0,3-M8D
PNP 3-wire – – 2.5 29.1 q574335 SMT-8M-A-PS-24V-E-2,5-OE
PNP 3-wire – – 5 57.1 q574336 SMT-8M-A-PS-24V-E-5,0-OE
PNP – – 3-pin 0.3 15.9 q574337 SMT-8M-A-PS-24V-E-0,3-M12
NPN 3-wire – – 2.5 29.1 q574338 SMT-8M-A-NS-24V-E-2,5-OE
– 3-pin – 0.3 8.9 q574339 SMT-8M-A-NS-24V-E-0,3-M8D
Non-contacting 2-wire – – 5 57.1 q574341 SMT-8M-A-ZS-24V-E-5,0-OE-Ex2
N/C contact
PNP 3-wire – – 7.5 85.1 q574340 SMT-8M-A-PO-24V-E-7,5-OE
Ordering data
Switching Electrical connection Cable Weight Part No. Type
output Cable Cable with plug, length
rotatable thread
M8x1 M12x1 [m] [g]
N/O contact
PNP – 3-pin – 0.3 8.9 574342 SMT-8M-A-PS-24V-E-0,3-M8D-Ex2
Switchable
PNP/NPN – 3-pin – 0.3 9 574343 SMT-8M-A-PNS-24V-E-0,3-M8D
PNP PS/PO – 3-pin – 0.3 9 574344 SMT-8M-A-PSO-24V-E-0,3-M8D
Festo core product range qReady for dispatch from the Festo factory in 24 hours
wReady for dispatch in 5 days maximum from stock

Ordering data – Modular products
Ordering table
Size 8 Condi Code Entry
tions code
0
M Module No. 574333
Function Proximity sensor for T-slot, electronic SMT-8M SMT-8M
– –
Series Short design A A
– –
Switching output 3-wire PNP N/O contact PS
3-wire NPN N/O contact NS
3-wire PNP N/C contact PO
2-wire N/O contact ZS
PNP/NPN switchable PNS
PNP N/C contact, N/O contact switchable PSO
– –
Rated operating voltage [V DC] 24 24V 24V
– –
Cable characteristics Energy chain + robot E E
– –
Cable length [m] 0.1 … 30 …
(0.1 … 5.0 in 0.1 increments, 5.0 … 30 in 0.5 increments)
– –
Cable designation With inscription label holder
Without inscription label holder N
– –
Connection technology Open end OE
M8, rotatable thread M8D
M8, snap-on flange M8
M12, rotatable thread M12
0
O EU certification II 3GD in accordance with EU Directive 2014/34/EU 1 -Ex2
1 Ex2 Not with switching output PNS, PSO, minimum cable length 0.2 m
Transfer order code

574333 SMT-8M – A – – 24V – E – – N – –

Proximity sensors SME-8M, for T-slot
Type codes
SME-8M
SME — 8M — DO — 24V — K — 7,5 — OE
Function
SME Proximity sensor, magneto-resistive
Design
8M For T-slot, insertable in the slot from above
Switching output, switching element function

DS N/O contact, 3-wire
DO N/C contact, 3-wire

24V 24 V DC
K Standard + energy chain
Cable length [m]

… 0.2 … 10
OE Open end
M8 Cable with plug M8x1, snap-on flange
M12 Cable with plug M12x1, rotatable thread

Technical data – Magnetic reed
Function Magnetic reed measuring principle

e.g. N/O contact, 3-wire, with cable Insertable in the slot from above,
does not protrude over the cylinder
profile
Cable clip and inscription labels
included in the scope of delivery
e.g. N/O contact, 3-wire, with plug

Design For T-slot
Approval certificate c UL us - listed (OL)
RCM trademark
Special characteristics Oil resistant
Note on materials Free of copper and PTFE
RoHS-compliant

Measuring principle Magnetic reed
Switching output
Type SME-8M-DS SME-8M-ZS SME-8M-DO
Switching output Contacting, bipolar
Switching element function N/O contact N/O contact N/C contact
Max. output current [mA] 500 80
Max. output current in mounting [mA] 80 80
kits
Max. switching capacity DC [W] 10 2.4
Max. switching capacity DC in [W] 2.4 2.4
mounting kits
Max. switching capacity AC [VA] 10 2.4
Max. switching capacity AC in [VA] 2.4 2.4
mounting kits
Voltage drop1) [V] 1.5 4.8 3.5
1) Applies to cable length 2.5m. Max. 0.15V voltage drop per metre of additional cable length

Protection against short circuit No
Overload protection No
Operating voltage range DC [V] 5 … 30
Operating voltage range AC [V] 5 … 30
Reverse polarity protection No

Switching element function DS/DO ZS
Electrical connection OE M8D M8 M12 OE M8D M8 M12
Electrical connection Cable, Cable with plug, 3-pin Cable, Cable with plug, 2-pin
3-wire M8x1 M8x1 M12x1 2-wire M8x1 M8x1 M12x1
Rotatable Snap-on Rotatable Rotatable Snap-on Rotatable
thread flange thread thread flange thread
Cable test conditions K Energy chain: 5 million cycles, bending radius 75 mm
Resistance to bending: to Festo standard; test conditions on request
E Energy chain: 5 million cycles, bending radius 28 mm
Torsional strength: ±270°/0.1 m
Cable length [m] 0.2 … 10
Cable characteristics K Standard + energy chain
Cable sheath materials K TPE-U(PUR)
E TPE-U(PUR), halogen-free
Electrical connection OE M…
Housing PA PA
High-alloy stainless steel High-alloy stainless steel
– Nickel-plated brass
– TPE-U(PUR)
Display/operation
Switching status indication Yellow LED
cable installation
Degree of protection IP65, IP68


1 Brown + 1 Brown +

N/O contact and N/C contact N/O contact
1 Brown + 1 Brown +

M12x1, 3-pin
N/C contact
1 Brown +
3 Blue –
2 White Output


SME-8M-…-OE – Cable
1 Yellow LED
2 Centre of the sensor element
3 Clamping component,
tightening torque 0.6 Nm
4 Inscription label holder
5 Connecting cable
L1 Cable length
SME-8M-DO-…-OE – Cable
1 Light-emitting diode (LED)
L1 Cable length
SME-8M-…-M8D – Cable with plug M8x1, rotatable thread

1 Yellow LED
5 Connecting cable
6 Plug to fit connecting cable
NEBU-M8
L1 Cable length
SME-8M-…-M8 – Cable with plug M8x1, snap-on flange

1 Yellow LED
5 Connecting cable
NEBU-M8
L1 Cable length
Type B1 D1 D2 D3 H1 L2 L3 L4 L5 ß 1
±0.05   ±0.05 ±0.1
SME-8M-…-OE – – 50 34.8 31.8 23
SME-8M-DO-…-OE – – – 39.5 36.5 –
5 2.9 4.6 1.5
SME-8M-…-M8D 9.6 M8x1 41
34.8 31.8 23
SME-8M-…-M8 8.5 M8x1 33


SME-8M-…-M12 – Cable with plug M12x1, rotatable thread
1 Yellow LED
5 Connecting cable
NEBU-M12
L1 Cable length
Type B1 D1 D2 D3 H1 L2 L3 L4 L5 ß 1

SME-8M-…-M12 5 2.9 15 M12x1 4.6 54.5 34.8 31.8 23 1.5
qCore product range

Ordering data
Switching output Electrical connection Cable length Part No. Type
Cable Cable with plug, rotat

able thread, M8x1
[m]
N/O contact
Contacting, bipolar 3-wire – 2.5 q543862 SME-8M-DS-24V-K-2,5-OE
5.0 q543863 SME-8M-DS-24V-K-5,0-OE
– 3-pin 0.3 q543861 SME-8M-DS-24V-K-0,3-M8D
2-wire – 2.5 q543872 SME-8M-ZS-24V-K-2,5-OE
N/C contact
Contacting, bipolar 3-wire – 7.5 q546799 SME-8M-DO-24V-K-7,5-OE
Ordering data
Cable Cable with plug, rotat

able thread, M8x1
[m]
N/O contact
Contacting, bipolar 3-wire – 7.5 543876 SME-8M-DS-24V-K-7,5-OE

Modular products – Magnetic reed
0
M Mandatory data
Module No. Function Switching output Rated operating Cable Cable length Connection
voltage characteristics technology
543892 SME-8M DS 24V K 0.2 … 10 OE

ZS E M8D
DO M8
M12
Ordering
example
543892 SME-8M – ZS – 24V – K – 0.8 – OE
Ordering table
Size 8 Condi Code Entry
tions code
0
M Module No. 543892
Function Proximity sensor for T-slot, contacting SME-8M SME-8M
– –
Switching output 3-wire N/O contact DS
2-wire N/O contact ZS
3-wire N/C contact DO
– –
Rated operating voltage [V DC] 24 24V 24V
– –
Cable characteristics Standard + energy chain K
Energy chain + robot E
– –
Cable length [m] 0.2 … 10 …
(0.2 … 5.0 m in 0.1 m increments, 5.0 … 10 m in 0.5 m increments)
– –
Connection technology Open end OE
M8, rotatable thread M8D
M8, snap-on flange M8
M12, rotatable thread M12
Transfer order code

543892 SME-8M – – 24 V – – –

Proximity sensors CRSMT-8/SMT-8-SL/SME-8, for T-slot
Type codes
CRSMT-8
CRSMT — 8 — PS — K2,5 — LED — 24
Function
CRSMT Proximity sensor, magneto-resistive,
suitable for the food industry, resistant to
acids and cooling lubricants
Design
8 For T-slot, insertable in the slot lengthwise

Electrical connection, cable length

K2,5 Cable, 2.5 m
K5 Cable, 5.0 m
Switching status indication

LED Yellow LED

24 24 V DC
CRSMT-8M
CRSMT — 8M — PS — 24 — K — —
Function
CRSMT Proximity sensor, magneto-resistive,
suitable for the food industry, resistant to
acids and cooling lubricants
Design
8M For T-slot, insertable in the slot from above


24 24 V DC
Cable attribute
K Standard and chain link trunking
Cable length
0.3 Cable, 0.3m1)
K5 Cable, 5 m, open end2)
K10 Cable, 10 m, open end2)
Connection
OE Open end
M8D M8, rotatable thread
M12 M12
1) Only with M8D or M12 connection

2) Only with OE connection

Proximity sensors CRSMT-8/SMT-8-SL/SME-8, for T-slot
Type codes
SMT/SME-8
SMT — 8 — PS — K — LED — 24 — — B
Function
SMT Proximity sensor, magneto-resistive
SME Proximity sensor, magnetic reed
Design

O N/C contact, 3-wire

K Cable, 2.5 m or 7.5 m
K2.5 Cable, 2.5 m
K5 Cable, 5.0 m
K-7,5 Cable, 7.5 m
KL Cable, 2.5 m
S Plug M8x1 with cable, 0.3 m

LED Yellow LED

24 24 V DC
230 230 V AC
Variant
K6 Heat resistant
Generation
B B series
SMT/SME-8-SL
SMT — 8 — SL — PS — LED — 24
Function
Design
SL Plug


LED Yellow LED

24 24 V DC

Proximity sensors CRSMT-8M, for T-slot
Function Suitable for foodstuffs

e.g. PNP, N/O contact, with plug Acid resistant
Alkali resistant
Resistant to cooling lubricants

Design For T-slot
Approval certificate RCM trademark
Special characteristics Acid resistant, alkali resistant, resistant to cooling lubricants
Suitable for use in the food industry1) As per manufacturer's declaration
Note on materials RoHS-compliant, halogen-free
1) Additional information www.festo.com/sp è Certificates.

Ambient temperature [°C] –40 … 85
Switching output
Switching element function N/O contact
Switching output PNP
Switching output repetition [mm] ± 0.1
accuracy
Switch-on time [ms] 1
Switch-off time [ms] .1
Max. output current [mA] 100
Max. switching capacity DC [W] 2.8
Voltage drop [V]  1.5
Residual current [mA]  0.05

Operating voltage range [V DC] 5 … 30

Cable characteristics Standard + energy chain
Torsional strength: > 300,000 cycles, ±270°/0.1 m
Bending strength: according to Festo standard
Electrical connection Cable, 3-wire Cable with plug, rotatable thread
M8D M12
Type of mounting Screw-clamped
Insertable in the slot from above
– 0.3 0.5
Information on materials
Housing High-alloy stainless steel, PP
Union nut – Nickel-plated brass
Cable sheath TPE-O
Insulating sheath PP
Plug housing – PP
Wire ends Wire end sleeves –
Pin contacts – Nickel-plated and gold-plated brass
Display/operation
Operating reserve indication Orange LED
Ambient temperature with flexible [°C] –20 … 85
cable installation
Degree of protection IP65
IP68
IP69K
ATEX
Explosion ignition protection type for gas Ex nA IIC T4 X Gc
Explosion ignition protection type for dust Ex tc IIIC T120°C X Dc
Explosion-proof temperature [°C] –40°C <= Ta <= +85°C
To EU Explosion Protection Directive (ATEX)


1 Brown + 1 Brown +
Dimensions, open end Download CAD data è www.festo.com
1 Yellow LED
2 Orange LED
4 Slot for screwdriver
5 Connecting cable
L1 Cable length
Type B1 D1 H1 L2 L3 L4 ß1
-N-
CRSMT-8M-PS-24V-K-5,0-OE
5 2.9 5 50 29.3 26.3 1.5
CRSMT-8M-PS-24V-K-10,0-OE

Dimensions with plug Download CAD data è www.festo.com
1 Yellow LED
2 Orange LED
5 Connecting cable
6 Plug module M8D
L1 Cable length
Type B1 D1 D2 D3 H1 L2 L3 L4 ß1
-N-
CRSMT-8M-PS-24V-K-0,3-M8D 5 2.9 9.5 M8x1 5 41.1 29.3 26.3 1.5
Dimensions with plug Download CAD data è www.festo.com
1 Yellow LED
2 Orange LED
5 Connecting cable
6 Plug module M12, 3-pin
L1 Cable length
Type B1 D1 D2 D3 H1 L2 L3 L4 ß1
-N- -N-
CRSMT-8M-PS-24V-K-0,3-M12 5 2.9 15 M12x1 5 54.5 29.3 26.3 1.5
Ordering data
Switching output Electrical connection Cable length Weight Part No. Type
Cable Cable with plug, rotatable
thread [m] [g]
N/O contact, corrosion resistant
PNP 3-wire – 5 47.6 574380 CRSMT-8M-PS-24V-K-5,0-OE
PNP 3-wire – 10 93.4 574381 CRSMT-8M-PS-24V-K-10,0-OE
PNP 3-pin M12x1 0.3 9.1 574382 CRSMT-8M-PS-24V-K-0,3-M12

PNP 3-pin M8x1 0.3 16.1 574383 CRSMT-8M-PS-24V-K-0,3-M8D

Proximity sensors CRSMT-8/SMT-8-SL, for T-slot

e.g. PNP, N/O contact, with plug principle
Insertable in the slot lengthwise
Corrosion-resistant designs
SMT-8-SL
Sturdy thanks to long guides
Plug directly on sensor
CRSMT SMT-8-SL

Type CRSMT SMT-8-SL
Switching output PNP PNP
Design For T-slot For T-slot
Conforms to standard EN 60947-5-2 –
Based on standard – EN 60947-5-2
Certification RCM trademark RCM trademark
– c UL us - listed (OL)
CE marking To EU EMC Directive To EU EMC Directive
(see declaration of conformity)
Note on materials Free of copper and PTFE Free of copper and PTFE
– RoHS-compliant

CRSMT SMT-8-SL
Measuring principle Magneto-resistive Magneto-resistive
Ambient temperature [°C] –20 … +60 –20 … +70
Switching output
Type CRSMT SMT-8-SL
Switching element function N/O contact N/O contact
Reproducibility of switching value [mm] ±0.1 –
Switch-on time [ms]  0.2 1
Switch-off time [ms]  0.5 3…5
Max. switching frequency [Hz] 1,000 140
Max. switching capacity DC [W] 3 3
Voltage drop [V]  1.8 2
Residual current [μmA]  100  1.5

Type CRSMT SMT-8-SL
Protection against short circuit Yes Yes
Overload protection – Yes

Type CRSMT SMT-8-SL
Rated operating voltage [V DC] – 24
Operating voltage range [V DC] 10 … 30 10 … 30
Type CRSMT SMT-8-SL
Electrical connection Cable, 3-wire Plug M8x1, 3-pin
Connection direction – In-line
Cable length [m] 2.5 –
5
Cable sheath materials TPE-O –
Type CRSMT SMT-8-SL
Electrical connection Cable, 3-wire Plug M8x1, 3-pin
Type of mounting Clamped in T-slot Screw-clamped
– Insertable in the slot lengthwise
Housing material information High-alloy stainless steel PA
PP –
Display/operation
Type CRSMT SMT-8-SL
Ambient temperature with flexible [°C] –5 … +60 –
cable installation
Degree of protection IP65 IP65
IP68 IP68
IP69K –
Insulation voltage [V] 500 –
Degree of contamination 3 –
Corrosion resistance class CRC 4 3

PS/NS
Plug, 3-pin
M8x1 Pin Wire colour Allocation
1 Brown +
3 Blue –
4 Black Output


CRSMT
1 Connecting cable
2 Yellow LED
3 Clamping component
SMT-8-SL

NEBU-M8
2 Yellow LED
4 Installation space for
connecting cable NEBU-M8W3
connecting cable NEBU-M8G3
Type B1 B2 D1 D3 H1 H2 H3 H4 H5 L1 L2 L3 L4
CRSMT 6.3 5 2.9 – 4.9 – – – – 32.4 – – –
SMT-8-SL 6.7 – – M8x1 17.1 13.1 10.2 3.1 17.6 66 48.4 36.6 25

Ordering data
Cable Cable with plug Plug M8x1
M8x1 [m]
N/O contact, basic version
PNP – – 3-pin – 562019 SMT-8-SL-PS-LED-24-B
N/O contact, corrosion resistant

PNP 3-wire – – 2.5 525563 CRSMT-8-PS-K-LED-24
5.0 525564 CRSMT-8-PS-K5-LED-24

Proximity sensors SME-8, for T-slot

e.g. N/O contact, with cable, 3-wire Insertable in the slot lengthwise
SME-8-SL
Sturdy thanks to long guides
Plug directly on sensor
e.g. N/O contact, with plug,
3-pin
SME-8 SME-8-SL

Type SME-8-K SME-8-S SME-8-ZS SME-8-O SME-8-SL
Design For T-slot
Conforms to standard EN 60947-5-2
Certification RCM trademark
CE marking (see declaration of conformity) To EU EMC Directive1)
RoHS-compliant – RoHS-compliant
1) For information about the applicability of the component see the manufacturer’s EC declaration of conformity at: www.festo.com/sp è Certificates.
If the component is subject to restrictions on usage in residential, office or commercial environments or small businesses, further measures to reduce the emitted interference may be necessary.

Type SME-8-K SME-8-K5 SME-8-K-7,5 SME-8-S SME-8-ZS SME-8-O SME-8-SL
Ambient temperature [°C] –40 … +60 –40 … +70 –40 … +70 –40 … +70 –40 … +60 –40 … +60 –40 … +60
Switching output
Switching element function N/O contact N/O contact N/O contact N/C contact N/O contact
Reproducibility of switching value [mm] ±0.1 ±0.1 ±0.1 ±0.1 ±0.1
Switch-on time [ms]  0.5  0.5  0.5 2  0.6
Switch-off time [ms]  0.03  0.03  0.03  0.2  0.05
Max. switching frequency [Hz] 800 – 800 – 500
Max. output current [mA] 500 500 80 50 500
Max. switching capacity AC [VA] 10 10 – 1.5 10
Max. switching capacity DC [W] 10 10 2.16 1.5 10
Voltage drop [V] 0 –  3.5  2.5 0

Operating voltage range [V AC] 12 … 30 12 … 30 – 12 … 30 10 … 30
Operating voltage range [V DC] 12 … 30 12 … 30 12 … 27 12 … 30 10 … 30

Electrical connection Cable, 3-wire Cable with Cable, 2-wire Cable, 3-wire Plug M8x1,
plug M8x1, 3-pin
3-pin
Cable length [m] 2.5 5 7.5 0.3 2.5 7.5 –
Cable sheath materials TPE-U (PUR) –
Type of mounting Clamped in T-slot
Housing material information Epoxy resin
PC
PET
High-alloy stainless steel
Display/operation
Ambient temperature with flexible [°C] –5 … +60 –5 … +70 –5 … +70 –5 … +70 –5 … +60 –5 … +60 –
cable installation
Degree of protection IP65 – IP65 – IP65
IP67 IP67 IP67 IP67 IP67
Insulation voltage [V] 50
Surge resistance [kV] 3 3 3 3 3 3 3
Degree of contamination 3

S
Plug, 3-pin
1 Brown +
3 Blue –
4 Black Output


N/O contact, cable
1 Connecting cable, 3 wire cable,

3 x 0.14 mm²
2 Yellow LED
3 Max. tightening torque 0.2 Nm
Type B1 B2 D1 H1 L3 L4 ß1
-N-
SME-8-K- … 6.4 5 2.9 4.3 28.8 26.3 1.3

N/C contact, cable

3 x 0.14 mm²
2 Yellow LED
-N-
SME-8-O-K-LED-24 6.4 5 2.9 4.4 30.8 28.3 1.3

Plug M8x1
1 Connecting cable
2 Yellow LED
NEBU-M8
L1 Cable length
Type B1 B2 D1 D3 H1 L2 L3 L4 L6 ß1
-N- +5 min.
SME-8-S-LED-24 6.3 5 2.9 M8 4.7 31 28.8 26.3 6 1.3

Ordering data
Cable Cable with plug Plug M8x1
M8x1 [m]
Contacting, 3-wire – – 2.5 150855 SME-8-K-LED-24
bipolar 5.0 175404 SME-8-K5-LED-24
7.5 530491 SME-8-K-7,5-LED-24
– 3-pin – 0.3 150857 SME-8-S-LED-24
2-wire – – 2.5 171169 SME-8-ZS-KL-LED-24
Contacting, – – 3-pin – 526622 SME-8-SL-LED-24
bipolar
N/C contact
Contacting, 3-wire – – 7.5 160251 SME-8-O-K-LED-24
bipolar


e.g. N/O contact, with cable, 2-wire, Insertable in the slot lengthwise
0 … 30 V AC/DC Heat resistant design
Variants with operating voltage
range up to 230 V DC/AC
e.g. N/O contact, with cable, 2-wire,

3 … 230 V AC/DC
SME-8-K-LED-230

SME-8-…-S6 SME-8-…-230
Design For T-slot
Certification – RCM trademark
CE marking (see declaration of conformity) – To EU EMC Directive1)
– To EU Low Voltage Directive
RoHS-compliant

SME-8-…-S6 SME-8-…-230
Switching output
SME-8-…-S6 SME-8-…-230
Switching output Contacting, bipolar Contacting, bipolar
Reproducibility of switching value [mm] ±0.1 ±0.1
Switch-on time [ms]  0.5 2
Switch-off time [ms]  0.03 0.03
Max. switching frequency [Hz] 800 500
Max. switching capacity AC [VA] 10
Max. switching capacity DC [W] 10
Voltage drop [V] 0  3.9
Residual current [mA] – 0


SME-8-…-S6 SME-8-…-230
SME-8-…-S6 SME-8-…-230
Operating voltage range [AC V] 0 … 30 3 … 230
Operating voltage range [V DC] 0 … 30 3 … 230
SME-8-…-S6 SME-8-…-230
Electrical connection Cable, 2-wire
Cable length [m] 2.5 2.5
– –
Cable sheath materials TPE-S TPE-U (PUR)
SME-8-…-S6 SME-8-…-230
Housing material information Epoxy resin Epoxy resin
PC PS
PET PET
High-alloy stainless steel High-alloy stainless steel
Display/operation
SME-8-…-S6 SME-8-…-230
Switching status indication – Yellow LED
SME-8-…-S6 SME-8-…-230
Ambient temperature with flexible [°C] –5 … +120 –5 … +60
cable installation
Ambient temperature –40 … +120 –
Degree of protection – –
IP67 IP67
Insulation voltage [V] 50 –
Surge resistance [kV] 0.8 4
Degree of contamination 3 3


3 x 0.14 mm²
-N-
±0.05 –0.08 ±0.05 … –0.1 –0.1 +0.2
SME-8- … -S6 6.4 5 2.9 4.3 28.8 26.3 1.3
1 Connecting cable
2 Yellow LED
Type B1 B2 D1 H1 H2 L3 L4 ß1
-N-
SME-8-K-LED-230 6.4 5 3.4 9.8 6.7 26.2 20.2 1.3
Ordering data
Switching output Electrical connection Connection direction Cable length Part No. Type
Cable [m]
N/O contact, heat resistant
Contacting, bipolar 2-wire In-line 2.5 161756 SME-8-K-24-S6
N/O contact, operating voltage range up to 230 V AC/DC

Contacting, bipolar 2-wire In-line 2.5 152820 SME-8-K-LED-230

-V- New
Proximity sensors SMT-8G, for T-slot

Type codes
SMT-8G
SMT — 8G — — 24V — E — —
Function
Design
8G For T-slot, insertable in the slot lengthwise


24V 24 V DC
Cable length [m], connection direction

2,5Q Cable, 2.5 m, lateral1)
0,3Q Cable with plug, 0.3 m, lateral2)
OE Open end
1) Only with electrical connection OE

2) Not with electrical connection OE

-V- New


PNP, N/O contact, with cable, 3-wire principle
Design ideal for gripper sensing
PNP, N/O contact, with plug
SMT-8G-…-OE SMT-8G-…-M
NPN, N/O contact, with cable, 3-wire
NPN, N/O contact, with plug

Design For T-slot
Approval certificate c UL us - listed (OL)
RoHS-compliant

Switching output PNP NPN

Max. switching capacity DC [W] 2.8


-V- New

Type SMT-8G-…-OE SMT-8G-…-M8D
Electrical connection Cable, 3-wire Cable with plug M8x1, 3-pin, rotatable thread
Connection direction Lateral
Torsional strength:  300,000 cycles, ±270°/0.1 m
Cable length [m] 2.5 0.3
Cable characteristics Energy chain + robot
Cable sheath materials Thermoplastic polyurethane elastomer
Housing material information Reinforced PA
Display/operation
cable installation
IP68

PS
Plug, 3-pin
1 Brown +
3 Blue –
4 Black Output

-V- New

1 Light-emitting diode (LED) 3 Inscription label holder 4 Connecting cable L1 Cable length
2 SMT-8G 5 Plug M8x1
B1 B2 B3 B4 D1 D2 D3 H1 H2 L1 L2 L3 L4 L5 L6 L7 ß1
  ±0.4 ±0.3 +5
SMT-8G-PS-…-OE – – 2500 + 70 – 50
SMT-8G-PS-…-M8D 9.6 M8x1 300 + 30 41.1 –
5.4 5 6.3 5 2.9 10 5 25 10.8 23 2.5 1.5
SMT-8G-NS-…-OE – – 2500 + 70 – 50
SMT-8G-NS-…-M8D 9.6 M8x1 300 + 30 41.1 –
Ordering data
Cable Cable with plug,
rotatable thread
M8x1 [m]
N/O contact
PNP 3-wire – 2.5 547859 SMT-8G-PS-24V-E-2,5Q-OE
– 3-pin 0.3 547860 SMT-8G-PS-24V-E-0,3Q-M8D
NPN 3-wire – 2.5 8065028 SMT-8G-NS-24V-E-2,5Q-OE

– 3-pin 0.3 8065027 SMT-8G-NS-24V-E-0,3Q-M8D

Proximity sensors SMT-8F-I, to EU Explosion Protection Directive (ATEX)
Technical data
Function EU conformity to EU EMC Directive,

Namur, with cable to EU Explosion Protection Directive
(ATEX)
Magneto-inductive measuring
principle
Cable clip included in the scope of
delivery
Technical data
Switching element function NAMUR
Switching output NAMUR
Design For T-slot
Reproducibility of switching value1) [mm] ±0.1
Electrical connection Cable, 2-wire
Cable length [m] 5
Rated operating voltage [V DC] 8.2
Max. output current in Namur operation [mA] 4.5
Residual current [mA] . 0.7
Switch-on time [ms] 0.5
Switch-off time [ms] 0.5
Protection against short circuit For all electrical connections
Reverse polarity protection
Certificate issuing authority KEMA 04 ATEX 1114 X
Product weight [g] 70
1) Only applicable to drives secured against rotation
Operating and environmental conditions

Cable installation Fixed Flexible
Degree of protection IP65, IP67
Approval certificate C-Tick
-H- Note -H- Note

When used in hazardous areas, the switch amplifier according to Operating instructions, declarations
proximity sensor SMT-8F-I must DIN EN 60 947-5-6. and statements of conformity
always be operated with an isolated è www.festo.com

Proximity sensors SMT-8F-I, to EU Explosion Protection Directive (ATEX)
Technical data
ATEX
Explosion ignition protection type for Ex ia IIC T4 … T6 Ga
gas
Explosion ignition protection type for Ex ia IIIC T95°C Da
dust
Explosion-proof temperature [°C] –10°C <= Ta <= +70°C
Explosion protection certification GOST-R EPL Ga
outside the EU
CE marking (see declaration of To EU EMC Directive
conformity) To EU Explosion Protection Directive (ATEX)
Materials
Housing PA
Cable sheath PVC

1 Yellow LED for switching status
2 Switching point
3 Clamping component, max.
4 Cable
Type B1 D1 H1 L1 L2 ß1

SMT-8F-I-8 … 5 2.9 6 31.8 6.2 1.5
Ordering data
Switching output Electrical connection Cable length [m] Part No. Type
Namur Cable, 2-wire 5.0 536 956 SMT-8F-I-8,2V-K5,0-OE-Ex

Proximity sensors SME-8-FM, for T-slot
Type codes
SME-8-FM
SME — 8 — FM — DS — 24V — K — 1,0 — OE
Function
Design
8 For T-slot
Sensor design
FM Screw-clamped, insertable in the slot from
above
Switching output
DS 3-wire N/O contact
ZS 2-wire N/O contact
Nominal operating voltage

24V 24 V AC/DC
K Standard
Cable length [m]

1,0 1
OE Open end


N/O contact, with cable, 3-wire Insertable in the slot from above
N/O contact, with cable, 2-wire
SME-8-FM-DS SME-8-FM-ZS

Design For T-slot
Based on standard EN-60947-5-2
Certification RCM trademark
RoHS-compliant

Switching output
Type SME-8-FM-DS SME-8-FM-ZS
Max. switching capacity AC [VA] 3
Max. switching capacity DC [W] 3

Operating voltage range [AC V] 10 … 30
Electrical connection Cable, 3-wire Cable, 2-wire
Cable test conditions Test conditions on request
Cable length [m] 1
Cable characteristics Standard
Cable sheath materials PVC
Type of mounting Screw-clamped
Housing material information PA

Display/operation
cable installation
1 Yellow LED
4 Cable
B1 B2 D1 H1 L1 L2
-N-
SME-8-FM 5.1 5.8 2.9 6 27.4 1,000
Ordering data
Cable [m]
Contacting, 3-wire 1 562515 SME-8-FM-DS-24V-K-1,0-OE
bipolar
2-wire 1 562516 SME-8-FM-ZS-24V-K-1,0-OE

Proximity sensors SDBT-BSW-…, for T-slot
Type codes
SDBT-BSW
SDBT — BSW — 1 L — — W — — —
Function
SDBT Sensor, position, binary, T series
Sensor design
B Insertable in slot, clamp at rear
S Non-contacting
W Welding field immune
Nominal operating voltage

1 24 V DC
Display
L LED
Digital switching output

PU 3-wire N/O contact, PNP
NU 3-wire N/O contact, NPN
ZU 2-wire N/O contact
Cable characteristic
W Resistant to welding spatter
Cable length
0,3 0.3 m
5 5m
Cable designation
N Without inscription label holder
LE Open end
M12 Plug connector M12, A-coded

Function Oil-resistant
e.g.:… -PU-…-LE Welding field immune,
AC 50 … 60 Hz, MFDC 1000 Hz
Resistant to welding spatter
Resistant to UV radiation
e.g.:… -NU-…-M12
-H- Note
For contactless piston-rod position sensing in Festo pneumatic cylinders, in The SDBT-BSW-…-ZU-… (2-wire version for 50/60 Hz AC) can be used on all
particular the hinge cylinder DFAW for AMI, in low and medium frequency drives.
welding installations (50/60 Hz, 1000 Hz) with strong constant or alternating The SDBT-BSW-…-PU/NU-… (3-wire version for 50/60 Hz AC and 1000 Hz
magnetic fields. MFDC) can be used on the following drives (see table). For drives that are not
When using the SDBT-BSW on drives other than the DFAW series, multiple listed, reliable functioning cannot be guaranteed. The application range
switching can occur. should be checked where necessary.
SDBT-BSW-…-PU/NU-… (3-wire version for 50/60 Hz AC and 1000 Hz MFDC)

Drive  [mm] 8 10 12 16 18 20 25 32 40 50 63 80 100
DFAW – – – – – – – – – n n n –
DSBC – – – – – – – n n – – – –
ADN – – n n – n n n n n – – –
ADVU – – n n – n n n n n – – –
DFM – – n n – n n n n n n – –
DSBG – – – – – – – n n n n – n
DSNU n n n n – n n n n n – – –
DGC-K – – – – n – n – – – – – –

Design For T-slot
Approval RCM mark
c UL us - Listed (OL)
Special characteristics Oil-resistant
Welding field immune
Resistant to UV radiation
Switching characteristics during the Output signal freezes
welding process
CE marking To EU EMC Directive
Note on materials Free of copper and PTFE, RoHS-compliant

Signal processing
Max. travel speed [m/s] 1

Switching output …-PU-… …- NU-… …-ZU-…

Switching output repetition [mm] ±0.1
accuracy
Switch-on time [ms] 15
Switch-off time [ms] 25
Max. output current in mounting [mA] 100 80
kits
Max. switching capacity DC [W] 2.8 1.9
Max. switching capacity DC in [W] 2.8 1.9
mounting kits
Voltage drop [V] .1.5 .6
Minimum load current [mA] 0 2.4
Residual current [mA] .0.005 .0.14 .0.7

Protection against short circuit Yes, pulsed
Electromechanical components …-PU/ NU-…-M12 …-PU/ NU-…-LE …-ZU-…-LE

Electrical connection Cable with plug connector, 3-pin, Cable, 3-wire Cable, 2-wire
M12x1, rotatable thread
Cable characteristic Resistant to welding spatter
Cable test conditions Test conditions on request

Mechanical system …-PU/ NU-…-M12 …-PU/ NU-…-LE …-ZU-…-LE

Mounting position Any
Max. tightening torque plug [Nm] 0.5 – –
connector
Information on materials
Housing Epoxy resin, high-alloy stainless steel, PA reinforced, black
Union nut Nickel-plated brass – –
Cable sheath PVC, irradiated grey
Insulating sheath PVC
Plug housing TPE-U(PU) – –
Wire ends – Wire end sleeve Wire end sleeve
Pin contacts Nickel-plated and gold-plated brass – –
Display/operation
Switching status display Yellow LED
Operating reserve display Orange LED
cable installation
IP68
Resistance to interference from Design insensitive to permanent magnetic fields  Bon
magnetic fields [ZU] Insensitive to alternating magnetic fields (50 … 60 Hz)  160 mT
[PU/NU] Insensitive to MFDC magnetic fields (1000 Hz)  200 mT,
insensitive to alternating magnetic fields (50 … 60 Hz)  200 mT

M12x1, 3-pin
N/O contact
1 Brown +
3 Blue –
4 Black Outlet

Dimensions open end Download CAD data è www.festo.com

SDBT-BSW-1L-…-W-5-N-LE
SDBT-BSW-1L-ZU-W-5-N-LE
Type B1 B2 D1 H1 H2 H3 L1 L2 L3 L4 L5
-N-
SDBT-BSW-1L-PU-W-5-N-LE
SDBT-BSW-1L-ZU-W-5-N-LE 8.5 3.5 4 14.5 10.5 6 5000 50 34 10 7
SDBT-BSW-1L-NU-W-5-N-LE
Dimensions with plug connector Download CAD data è www.festo.com

SDBT-BSW-1L-…-W-0.3-N-M12
Type B1 B2 D1 D2 D3 H1 H2 H3 L1 L2 L3 L4
-N- -N-
SDBT-BSW-1L-PU-W-0,3-N-M12
8.5 3.5 4 M12 15 14.5 10.5 6 300 54.5 34 10
SDBT-BSW-1L-NU-W-0,3-N-M12

Ordering data
Switching output Cable length Weight Part No. Type
[m] [g]
N/O contact
3-wire, NPN 0.3 23.3 2427615 SDBT-BSW-1L-NU-W-0.3-N-M12
3-wire, PNP 5 119.4 2427616 SDBT-BSW-1L-PU-W-5-N-LE
3-wire, NPN 5 119.4 2427618 SDBT-BSW-1L-NU-W-5-N-LE
3-wire, PNP 0.3 23.3 2476855 SDBT-BSW-1L-PU-W-0.3-N-M12
2-wire, contactless 5 116.9 2427617 SDBT-BSW-1L-ZU-W-5-N-LE
Accessories – Connecting cables

[m] [g]
3-wire, M12x1 straight socket 3 – 30450 SIM-M12-RS-3GD-3
3-wire, M12x1 angled socket 3 – 30451 SIM-M12-RS-3WD-3

Proximity sensors SMTO/SMTSO/SMEO-8E, for T-slot
Type codes
SMTO/SMTSO/SMEO-8E
SMTO — 8E — PS — M12 — LED — 24 —
Function
SMTO Proximity sensor, magneto-resistive
SMTSO Proximity sensor, magneto-inductive,
welding field immune
SMEO Proximity sensor, magnetic reed
Design
8E For T-slot, mounting via accessories


K Cable, 2.5 m or 7.5 m
S Plug M8x1
M12 Plug M12x1

LED Yellow LED

24 24 V DC
230 230 V AC
Variant
S6 Heat resistant

Proximity sensors SMTO-8E/SMTSO-8E, for T-slot

e.g. PNP, N/O contact, with plug principle
BN + Welding field immune designs
BK RL
PNP BU –
NPN, N/O contact, with plug

BN +
NPN BK
BU RL
–
SMTO-8E SMTSO-8E

Type SMTO-8E SMTSO-8E, welding field immune
Design For T-slot
Approval certificate RCM trademark
CE marking To EU EMC Directive1)
RoHS-compliant –

Measuring principle Magneto-resistive Magneto-inductive
Switching output
Switching output PNP NPN PNP NPN
Reproducibility of switching value [mm] ±0.1
Switch-on time [ms] 0 … 0.5 0 … 38
Switch-off time [ms] 10 … 25 0 … 20
Max. switching capacity DC [W] 3 6
Voltage drop [V] 0 … 1.8 0 … 1.8 0…3
Residual current [μmA] 0.01

Switching output PNP NPN PNP NPN
Protection against short circuit Pulsed Yes Pulsed
Operating voltage range DC [V] 10 … 30

Type SMTO-8E-…-S SMTO-8E-…-M12 SMTSO-8E-…-M12, welding field
immune
Electrical connection Plug M8x1, 3-pin Plug M12x1, 3-pin Plug M12x1, 3-pin
Connection direction Lateral
Max. tightening torque, plug [Nm] 0.3 0.5 0.5
immune
Via accessories
Tightening torque [Nm] 1 0.5 0.5
Housing material information TPE-U(PU) TPE-U(PU) TPE-U(PU)
Nickel-plated brass High-alloy stainless steel High-alloy stainless steel
– Wrought aluminium alloy Wrought aluminium alloy
– PA
Display/operation
immune
IP67
Resistance to interference from magnetic – – Alternating magnetic field
fields 45 … 65 Hz

1 Brown + 1 Brown +


SMTO-8E-…-S-LED-24 – Plug M8x1
1 Suitable for socket type

SIM-M8
2 Yellow LED
3 Socket head screw M3x25
DIN 912, max. tightening
torque 1 Nm
4 Theoretical switching point
5 Mounting kit SMB-8E (not
included in scope of delivery)
6 Installation space for angled
plug socket 90°
7 Installation space for straight
plug socket
B1 B2 D1 H1 H2 H3 H4 H5 H6 H7 L1 L2 L3 L4
±0.3 ±0.27 ±0.3
SMTO-8E- … -S-LED-24 20 28 M8x1 19.2 11.5 4.4 4 2.2 ~32 ~46 20 5 4 ~26

SMTO-8E-…-M12-LED-24 – Plug M12x1

SIM-M12
2 Yellow LED
torque 1 Nm
plug socket 90°
plug socket
B1 B2 D1 H1 H2 H3 H4 H5 H6 H7 L1 L2 L3 L4
±0.3 ±0.34 ±0.27 ±0.3
SMTO-8E- … -M12-LED-24 20 28 M12x1 22.5 11.5 4.4 4 2.2 ~36 ~59 20 5 4 ~36.5


SMTSO-8E-…-M12-LED-24 – Plug M12x1
2 Yellow LED
connecting cable NEBU-M12G5
B1 B2 D1 H1 H2 H3 H7 H8 H9 L1 L2 L3 L5 L6
+0.5 ±0.2
SMTO-8E- … -M12-LED-24 17 24.8 M12x1 21.5 11.5 2.5 ~56 7.5 4.2 28 4.8 23.5 17.5 4.5
Ordering data
Switching output Electrical connection Part No. Type
Plug M8x1 Plug M12x1
PNP 3-pin – 171178 SMTO-8E-PS-S-LED-24
– 3-pin 171179 SMTO-8E-PS-M12-LED-24
NPN 3-pin – 171166 SMTO-8E-NS-S-LED-24
– 3-pin 171176 SMTO-8E-NS-M12-LED-24
N/O contact, welding field immune

PNP – 3-pin 191986 SMTSO-8E-PS-M12-LED-24
NPN – 3-pin 175825 SMTSO-8E-NS-M12-LED-24

Accessories – Connecting cables

[m] [g]
3-wire, M12x1 straight socket 3 – 30450 SIM-M12-RS-3GD-3
3-wire, M12x1 angled socket 3 – 30451 SIM-M12-RS-3WD-3

Proximity sensors SMEO-8E, for T-slot

e.g. N/O contact, 3-wire, with plug Heat resistant variant
BN +/–
BK RL
BU –/+
E.g. N/O contact, 2-wire, with cable

BN RL
+/–
BU –/+

SMEO-8E-…-24 SMEO-8E-…-24-S6, heat resistant SMEO-8E-…-230
Design For T-slot For T-slot For T-slot
Conforms to standard EN 60947-5-2 – EN 60947-5-2
Certification – – RCM trademark
CE marking To EU EMC Directive1) – To EU EMC Directive1)
(see declaration of conformity) – To EU Low Voltage Directive
Note on materials Free of copper and PTFE Free of copper and PTFE Free of copper and PTFE
RoHS-compliant – –

Measuring principle Magnetic reed Magnetic reed Magnetic reed
Ambient temperature [°C] –40 … +60 –40 … +120 –20 … +60
Switching output
Switching output Contacting, bipolar Contacting Contacting, bipolar
– – Without LED function
Switching element function N/O contact N/O contact N/O contact
Reproducibility of switching value [mm] ±0.1 ±0.1 ±0.1
Switch-on time [ms] 0 … 0.5 0 … 0.5 0…2
Switch-off time [ms] 0.03 0.03 0.03
Max. switching frequency [Hz] 800 500 500
Max. output current [mA] 500 500 120
Max. switching capacity DC [W] 10 10 10
Max. switching capacity AC [VA] 10 10 10
Voltage drop [V] – 0.5 3.9

Operating voltage range DC [V] 12 … 30 0 … 30 3 … 250
Operating voltage range AC [V] 12 … 30 0 … 30 3 … 230
Reverse polarity protection No For all electrical connections No

Type SMEO-8E-S-LED-24 SMEO-8E-M12-LED-24 SMEO-8E-K-24-S6, heat SMEO-8E-M12-LED-230
resistant
Electrical connection Plug M8x1, 3-pin Plug M12x1, 3-pin Cable, 2-wire Plug M12x1, 3-pin
Connection direction Lateral Lateral Lateral In-line
Pin contact materials Nickel-plated brass Brass – –
Cable length [m] – – 2.5 –
Cable sheath materials – – TPE-S –
Type SMEO-8E-S-LED-24 SMEO-8E-M12-LED-24 SMEO-8E-K-24-S6, heat SMEO-8E-M12-LED-230
resistant
Type of mounting Via accessories Via accessories Via accessories
Tightening torque [Nm] 0.5 0.5 0.5 0.5
Housing material information TPE-U(PU) TPE-U(PU) TPE-U(PU) TPE-U(PU)
High-alloy stainless steel High-alloy stainless steel – High-alloy stainless steel
Wrought aluminium alloy Wrought aluminium alloy Wrought aluminium alloy
Nickel-plated brass – –
Display/operation
Switching status indication Yellow LED – Yellow LED
Ambient temperature with flexible [°C] – –40 … +120 –
cable installation
Degree of protection IP65 IP65 IP65
IP67 IP67 IP67
Insulation voltage [V] – 50 –
Surge resistance [kV] 0.8 – 4
Degree of contamination 3 3 3

M8x1, 3-pin M12x1, 3-pin, 24 V
1 Brown + 1 Brown +

M12x1, 3-pin, 230 V
N/O contact
4 Black ~/+
3 Blue ~/–


SMEO-8E-S-LED-24 – Plug M8x1

SIM-M8
2 Yellow LED
torque 1 Nm
plug socket 90°
plug socket
B1 B2 D1 H1 H2 H3 H4 H5 H6 H7 L1 L2 L3 L4
±0.3 ±0.27 ±0.3
SMEO-8E- … -S-LED-24 20 28 M8x1 19.2 11.5 4.4 4 2.2 ~32 ~46 20 5 4 ~26

SMEO-8E-M12-LED-24 – Plug M12x1

SIM-M12
2 Yellow LED
torque 1 Nm
plug socket 90°
plug socket
B1 B2 D1 H1 H2 H3 H4 H5 H6 H7 L1 L2 L3 L4
±0.3 ±0.34 ±0.27 ±0.3
SMEO-8E- … -M12-LED-24 20 28 M12x1 22.5 11.5 4.4 4 2.2 ~36 ~59 20 5 4 ~36.5


SMEO-8E-K24-S6 – Cable, heat resistant to 120°C
1 Cable, 2.5 m long,

2 x 0.14mm²
torque 1 Nm
B1 B2 D1 H2 H3 H4 L1 L2 L3
±0.3 ±0.27 ±0.3
SMEO-8E-K24-S6 20 28 2.9 11.5 4.4 4 20 5 4
Ordering data
Switching output Electrical connection Cable length Product Part No. Type
weight
Cable Plug M8x1 Plug M12x1
[m] [g]
Contacting, – 3-pin – 10 171163 SMEO-8E-S-LED-24
bipolar
– 3-pin 9 171164 SMEO-8E-M12-LED-24
N/O contact, heat resistant

Contacting, 2-wire – 2.5 40 171158 SMEO-8E-K-24-S6
bipolar
N/O contact, operating voltage range 3 … 250 V AC/DC

Contacting, – 3-pin – 9 171160 SMEO-8E-M12-LED-230
bipolar

Accessories
Mounting kit SMBR-8-8/100-S6
Material:
Rail: Anodised wrought aluminium
alloy
Clamping strap, screws: High-alloy
stainless steel
Free of copper and PTFE
RoHS-compliant
1 Mounting thread for proximity 2 Protective cover

sensor SM…O-8E
Dimensions and ordering data

For piston B1 B2 D1 H1 L1 L2 L3 ß1 CRC1) Part No. Type

8 … 100 27.4 0.2 M3 22.4 34 10 7.9 2.5 4 q538937 SMBR-8-8/100-S6
1) Corrosion resistance class 4 to Festo standard 940 070

Components subject to high corrosion stress. Parts used with aggressive media, e.g. in the food or chemical industry. These applications should be supported with special tests with the media if required.
Mounting kit SMBR
Material:
Polyacetal
RoHS-compliant
1 Proximity sensor SM…-8

2 Guide slot for cable
Max. tightening torque 0.5 Nm

For piston  B1 B2 H1 L2 L3 Part No. Type
8 18.9 12.3 18.4 19 7 175091 SMBR-8-8
10 20.4 13.8 20.4 19 7 175092 SMBR-8-10
12 22.7 14.3 21.9 19 7 q175093 SMBR-8-12
16 28.2 16.9 25.7 19 8 q175094 SMBR-8-16
20 34.5 20.8 30.4 19 9 q175095 SMBR-8-20
25 36.7 22.7 35.6 19 9 q175096 SMBR-8-25
32 41.7 24.6 42.7 19 9 175097 SMBR-8-32
40 47.1 26.5 50.7 19 9 175098 SMBR-8-40
50 56.4 28.6 61.5 19 9 175099 SMBR-8-50
63 69.4 32 74.5 19 9 175100 SMBR-8-63

Accessories
Mounting kit CRSMB

Design: For round cylinders
Type of mounting: Bonded using
enclosed adhesive tape
Degree of protection: IP65, IP68,

IP69K
Ambient temperature: –40 … +90 °C
Material:
Housing: Polyurethane
Rail: Hard anodised aluminium
Ordering data
For piston B1 B2 H1 L1 CRC1) Part No. Type

32 … 100 15.8 11.8 9.3 35 4 525565 CRSMB-8-32/100
1) Corrosion resistance class 4 to Festo standard 940 070

Components subject to high corrosion stress. Parts used with aggressive media, e.g. in the food or chemical industry. These applications should be supported with special tests with the media if required.
Mounting kit SMB-8-FENG
Material:
Wrought aluminium alloy
1 Threaded pin

For piston B1 B2 D1 H1 L1 L2 Tightening Part No. Type
 torque
[Nm]
32/40 35.1 8.7 M3 15.5 27 17 0.2 175705 SMB-8-FENG-32/40
50/63 47 12.3 M4 20 27 17 0.5 175706 SMB-8-FENG-50/63
80/100 64.3 15.7 M5 24.3 27 17 0.7 175707 SMB-8-FENG-80/100
Mounting kit SMB-8E
Material:
Anodised aluminium, stainless steel
Note on materials:
RoHS-compliant
1 Suitable for T-slot
2 Max. tightening
torque 1 Nm
Ordering data
For piston B1 B2 D1 H1 H2 L1 ß1 Part No. Type

10 … 125 21.5 5.1 M3 11.5 3 8 2.5 178230 SMB-8E

Accessories
Mounting kit SMB-8-C
Temperature: –40 … 120°C

Material:
Retainer: Anodised wrought
aluminium alloy
Screws: High-alloy stainless steel
Free of copper and PTFE,
RoHS-compliant

Type B1 B2 B3 D1 H1 L1 ß1 Tightening CRC1) Weight Part No. Type
torque
[Nm] [g]
SMB-8-C 17 7 5.5 M3 7.8 20 1.5 0.2 … 0.6 3 3.5 1806790 SMB-8-C
1) Corrosion resistance class 3 according to Festo standard 940 070

Components subject to high corrosion stress. Externally visible parts with primarily functional surface requirements which are in direct contact with a normal industrial environment or media such as solvents and
cleaning agents.
Sensor bracket DASP-M4-…-A
Material:
Anodised wrought aluminium alloy
RoHS-compliant
1 Slot for proximity

sensor

Type B1 D1 H1 L1 ß1 Tightening CRC1) Weight Part No. Type
torque
[Nm] [g]
DASP-M4-125-A 32.5 M5 28 45.4 2.5 1 3 26.5 1451483 DASP-M4-125-A
DASP-M4-160-A 32.5 M6 44.7 69.4 3 1 3 41.5 1553813 DASP-M4-160-A
DASP-M4-250-A 32.5 M6 56.3 88 3 1 3 60 1456781 DASP-M4-250-A
DASP-M4-320-A 32.5 M6 56.3 88 3 1 3 60 3015256 DASP-M4-320-A

cleaning agents.

Accessories
Mounting SMBZ-8-… SMBZ-8-32/100
Material:
Rail: Anodised wrought aluminium
alloy
Screws: high-alloy stainless steel
RoHS-compliant
SMBZ-8-125/320
1 Slot for inscription label 2 Slot for proximity sensor

For piston  B1 D1 D2 H1 L1 L2 ß1 Part No. Type
32 … 100 31 30 1.5 537806 SMBZ-8-32/100
M5 M3 33 20
125 … 320 32.3 22 2.5 537808 SMBZ-8-125/320
Position marker SMM

Ambient temperature –40 … +120 °C
Material:
Housing: anodised wrought
aluminium alloy
Note on materials: RoHS-compliant

B1 H1 H2 L1 ß1 CRC1) Part No. Type PU2)
6.3 5.0 4.0 4.0 1.5 3 547941 SMM-8 10

cleaning agents.
2) Packaging unit

Accessories
Ordering data – Connecting cables Technical data è Internet: nebu, sim

Number of wires Cable length [m] Part No. Type
Socket M8x1, 3-pin
For SMT/SME-8… and SMTO/SMTSO/SMEO-8E 3 2.5 q541333 NEBU-M8G3-K-2.5-LE3
5 q541334 NEBU-M8G3-K-5-LE3
For SMT/SME-8… and SMTO/SMTSO/SMEO-8E 3 2.5 q541338 NEBU-M8W3-K-2.5-LE3
5 q541341 NEBU-M8W3-K-5-LE3
Socket M12x1, 5-pin

For SMT/SME-8M and SMTO/SMTSO/SMEO-8E 3 2.5 q541363 NEBU-M12G5-K-2.5-LE3
5 q541364 NEBU-M12G5-K-5-LE3
For SMT/SME-8M and SMTO/SMTSO/SMEO-8E 3 2.5 541367 NEBU-M12W5-K-2.5-LE3
5 541370 NEBU-M12W5-K-5-LE3
Socket M12x1, resistant to welding spatter

For SDBT and SMTSO 3 3 30450 SIM-M12-RS-3GD-3
For SDBT and SMTSO 3 3 30451 SIM-M12-RS-3WD-3
Ordering data – Safety clips for ATEX zone

Size Description Part No. Type PU1)
M8 Protects "equipment that is not intrinsically safe" in zones 2 and 548067 NEAU-M8-GD 1
22 against simple disconnection
M12 ATEX category: gas: II 3G / dust: II 3D 548068 NEAU-M12-GD 1
1) Packaging unit
Ordering data – Mounting components

Description Part No. Type
For locating connecting cables 534254 SMBK-8
Ordering data – Sensor tester

Description Part No. Type
Testing operation of proximity sensors using the integrated voltage supply 158481 SM-TEST-1
Adjustment of proximity sensors on the cylinder
Ordering data – Inscription labels

Size Part No. Type PU1)
23x4 mm 541598 ASLR-L-423 34
1) Packaging unit

Proximity Sensors SMT/SME-8, For T-Slot: Look For The Star!

Uploaded by

Copyright:

Available Formats

Proximity Sensors SMT/SME-8, For T-Slot: Look For The Star!

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Proximity Sensors SMT/SME-8, For T-Slot: Look For The Star!

Uploaded by

Copyright:

Available Formats

Proximity sensors SMT/SME-8, for T-slot

Welding field immune

Heat resistant up to 120 °C

To EU Explosion Protection Directive (ATEX)

2 è Internet: www.festo.com/catalogue/... Subject to change – 2017/04

T-slot sensors can be used for drives with T-slot

C-slot sensors can be used for drives with C-slot

Suitable Not suitable

2017/04 – Subject to change è Internet: www.festo.com/catalogue/... 3

4 è Internet: www.festo.com/catalogue/... Subject to change – 2017/04

2017/04 – Subject to change è Internet: www.festo.com/catalogue/... 5

Rated operating voltage

Cable length [m]

6 è Internet: www.festo.com/catalogue/... Subject to change – 2017/04

Function Magneto-resistive measuring

General technical data

Input signal/measuring element

1) Variant …-PS/NS/PO-…-Ex2: max. output current in mounting kits 80 mA, Ta 70 °C

Output, additional data

2017/04 – Subject to change è Internet: www.festo.com/catalogue/... 7

8 è Internet: www.festo.com/catalogue/... Subject to change – 2017/04

Pin allocation to EN 60947-5-2

Pin allocation to EN 60947-5-2

Pin allocation to EN 60947-5-2

2017/04 – Subject to change è Internet: www.festo.com/catalogue/... 9

Dimensions Download CAD data è www.festo.com

SMT­8M­A-24V-E-…-… (PNS, PSO)

10 è Internet: www.festo.com/catalogue/... Subject to change – 2017/04

Dimensions Download CAD data è www.festo.com

5 Inscription label holder drawn

SMT­8M­A-…-M8D – Cable with plug M8x1, rotatable thread

SMT­8M­A-…-M8 – Cable with plug M8x1, snap-on flange

SMT­8M­A-…-M12 – Cable with plug M12x1, rotatable thread

2017/04 – Subject to change è Internet: www.festo.com/catalogue/... 11

qCore product range

12 è Internet: www.festo.com/catalogue/... Subject to change – 2017/04

Transfer order code

2017/04 – Subject to change è Internet: www.festo.com/catalogue/... 13

Switching output, switching element function

Rated operating voltage

Cable length [m]

14 è Internet: www.festo.com/catalogue/... Subject to change – 2017/04

Function Magnetic reed measuring principle

General technical data

Input signal/measuring element

Output, additional data

2017/04 – Subject to change è Internet: www.festo.com/catalogue/... 15

16 è Internet: www.festo.com/catalogue/... Subject to change – 2017/04

Pin allocation to EN 60947-5-2

Pin allocation to EN 60947-5-2

Pin allocation to EN 60947-5-2

2017/04 – Subject to change è Internet: www.festo.com/catalogue/... 17

Dimensions Download CAD data è www.festo.com

SME-8M-…-M8D – Cable with plug M8x1, rotatable thread

SME-8M-…-M8 – Cable with plug M8x1, snap-on flange

18 è Internet: www.festo.com/catalogue/... Subject to change – 2017/04

Dimensions Download CAD data è www.festo.com

qCore product range

SMT8MA-24V-E-…-… (PNS, PSO)

SMT8MA-…-M8D – Cable with plug M8x1, rotatable thread

SMT8MA-…-M8 – Cable with plug M8x1, snap-on flange

SMT8MA-…-M12 – Cable with plug M12x1, rotatable thread

Cable Cable with plug, rotat

Cable Cable with plug, rotat