Outdoor Directional Single-band Antenna

ODV-032R18E-G
 X Pol, 32°Horizontal Beamwidth
 790-960MHz
 17.6dBi, E-Tilt: 0-20

Electrical Specifications
R 790-960
Frequency Range (MHz)
790-896 880-960
Polarization ±45°
Gain (dBi) 17.0 17.6
Horizontal Beamwidth (°) 34 32
Vertical Beamwidth (°) 15.0 13.9
Electrical Downtilt (°) 0-20
1st Upper Sidelobe Suppression (dB) ≥17(0°), ≥16(10°), ≥16(20°)
Upper Sidelobe Suppression, Peak to 20°(dB) ≥16
Front-To-Back Ratio, 180°30° (dB) ≥25
Cross-polar Discrimination@0°(dB) ≥17
VSWR ≤1.5:1
Isolation Intra-system (dB) ≥30
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Maximum Power per Port(W) 500
Impedance (Ω) 50
Lightning Protection Direct Ground

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 1415x500x140 / 55.7x19.7x5.5
Shipping Dimensions, HxWxD(mm) / (in) 1765x635x305 / 69.5x25.0x12.0
Net Weight, Antenna (kg) / (Ib) 28.0 / 61.7
Net Weight, Mounting Kit (kg) / (Ib) 6.3 / 13.9
Shipping Weight (kg) / (Ib) 38.0 / 83.8
Connector Type 2 x 7/16 DIN-Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -50 to +70
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
925 / 113 / 1118
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 1
DS-Control:3-0-5 / 1216
Outdoor Directional Single-band Antenna
ODV-032R18E-G
 X Pol, 32°Horizontal Beamwidth
 790-960MHz
 17.6dBi, E-Tilt: 0-20

Electrical Specifications BASTA Standard**

R 790-960
Frequency Range (MHz)
790-896 880-960
Over All Tilts 16.70.6 17.30.6
Min Tilt 17.0 17.6
Gain (dBi)
Mid Tilt 16.9 17.4
Max Tilt 16.2 16.6
Horizontal Beamwidth (°) 342 322
Vertical Beamwidth (°) 15.0 1.2 13.90.9
Electrical Downtilt Deviation (°) ≤1.0 ≤0.9
1st Upper Sidelobe Suppression (dB) ≥18 ≥18
Upper Sidelobe Suppression, Peak to 20° (dB) ≥18 ≥18
Front-To-Back Ratio, 180°30° (dB) ≥28 ≥30
Cross-polar Discrimination@0°(dB) ≥20 ≥24
Cross-polar Discrimination over Sector(dB) ≥11 ≥9
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

Connector Position

500

140

Accessories
Model Quantity Description
00-ZJ11(16) 1 Mounting Kit, 0-16°tilt.

Optional Products (order separately)

Model Quantity Description
RCU-003(IV) 1 Remote Control Unit
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 2
DS-Control:3-0-5 / 1216
Outdoor Directional Single-band Antenna
ODV-032R20E-G V1
 X Pol, 32°Horizontal Beamwidth
 790-960MHz
 19.2dBi, E-Tilt: 0-11

Electrical Specifications
R 790-960
Frequency Range (MHz)
790-896 880-960
Polarization ±45
Gain (dBi) 18.5 19.2
Horizontal Beamwidth (°) 34 32
Vertical Beamwidth (°) 10.4 9.5
Electrical Downtilt (°) 0-11
1st Upper Sidelobe Suppression (dB) ≥18(0°), ≥17(6°), ≥16(11°)
Upper Sidelobe Suppression, Peak to 20° (dB) ≥16
Front-To-Back Ratio, 180°30° (dB) ≥28
Cross-polar Discrimination@0° (dB) ≥20
VSWR ≤1.5:1
Isolation Intra-system (dB) ≥30
IM3 (2x43 dBm Carrier) (dBc) <-150
Maximum Power per Port (W) 500
Impedance (Ω) 50
Lightning Protection Direct Ground

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 1970x500x140 / 77.6x19.7x5.5
Shipping Dimensions, HxWxD(mm) / (in) 2330x635x305 / 91.7x25.0x12.0
Net Weight, Antenna (kg) / (Ib) 30.6 / 67.5
Net Weight, Mounting Kit (kg) / (Ib) 10.3 / 22.7
Shipping Weight (kg) / (Ib) 51.7 / 114.0
Connector Type 2 x 7/16 DIN-Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -50 to +70
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
1397 / 162 / 1736
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 3
DS-Control:3-0-6 / 1216
Outdoor Directional Single-band Antenna
ODV-032R20E-G V1
 X Pol, 32°Horizontal Beamwidth
 790-960MHz
 19.2dBi, E-Tilt: 0-11

Electrical Specifications BASTA Standard**

R 790-960
Frequency Range (MHz)
790-896 880-960
Over All Tilts 18.50.6 19.10.4
Min Tilt 18.5 19.2
Gain (dBi)
Mid Tilt 18.5 19.2
Max Tilt 18.4 18.9
Horizontal Beamwidth (°) 342 322
Vertical Beamwidth (°) 10.40.5 9.50.7
1st Upper Sidelobe Suppression (dB) ≥19 ≥20
Upper Sidelobe Suppression, Peak to 20° (dB) ≥19 ≥20
Front-To-Back Ratio, 180°30° (dB) ≥28 ≥30
Cross-polar Discrimination@0° (dB) ≥20 ≥22
Cross-polar Discrimination over Sector (dB) ≥11 ≥8
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

Connector Position

500

.
140

Accessories
Model Quantity Description
00-ZJ11(12) (three mounting points) 1 Mounting Kit, 0-12°tilt.

Optional Products (order separately)

Model Quantity Description
RCU-003(IV) 1 Remote Control Unit
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 4
DS-Control:3-0-6 / 1216
Outdoor Directional Single-band Antenna
ODV-032R23K-G V2
 X Pol, 32°Horizontal Beamwidth
 1710-2170MHz
 22.4dBi, E-Tilt: 0-8

Electrical Specifications
B 1710-2170
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170
Polarization ±45°
Gain (dBi) 22.1 22.1 22.4
Horizontal Beamwidth (°) 33 31 29
Vertical Beamwidth (°) 4.9 4.5 4.4
Electrical Downtilt (°) 0-8
1st Upper Sidelobe Suppression (dB) ≥18(0°), ≥17(4°), ≥16(8°)
Front-To-Back Ratio, 180°30° (dB) ≥30
Cross-polar Discrimination@0° (dB) ≥15
VSWR ≤1.5:1
Isolation Intra-system (dB) ≥30
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Maximum Power per Port (W) 300
Impedance (Ω) 50
Lightning Protection Direct Ground

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 1960x320x145 / 77.2x12.6x5.7
Shipping Dimensions, HxWxD (mm) / (in) 2280x430x270 / 89.8x16.9x10.6
Net Weight, Antenna (kg) / (Ib) 19.5 / 43.0
Net Weight, Mounting Kit (kg) / (Ib) 5.9 / 13.0
Shipping Weight (kg) / (Ib) 32.3 / 71.2
Connector Type 2 x 7/16 DIN-Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -50 to +70
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
733 / 170 / 936
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 5
DS-Control:2-0-1 / 1212
Outdoor Directional Single-band Antenna
ODV-032R23K-G V2
 X Pol, 32°Horizontal Beamwidth
 1710-2170MHz
 22.4dBi, E-Tilt: 0-8

Electrical Specifications BASTA Standard**

B 1710-2170
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170
Over All Tilts 22.2±0.8 22.1±0.3 22.3±0.60
Min Tilt 22.1 22.1 22.4
Gain (dBi)
Mid Tilt 22.3 22.3 22.4
Max Tilt 22.1 21.9 22.1
Horizontal Beamwidth (°) 33±2 31±2 29±2
Vertical Beamwidth (°) 4.9±0.4 4.5±0.3 4.4±0.4
Electrical Downtilt Deviation (°) ≤0.6 ≤0.6 ≤0.6
1st Upper Sidelobe Suppression (dB) ≥18 ≥19 ≥20
Upper Sidelobe Suppression, Peak to 20° (dB) ≥17 ≥16 ≥15
Front-To-Back Ratio, 180°30° (dB) ≥36 ≥35 ≥33
Cross-polar Discrimination@0° (dB) ≥17 ≥18 ≥17
Cross-polar Discrimination over Sector (dB) ≥10 ≥10 ≥10
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

Connector Position

320

145

Accessories
Model Quantity Description
00-ZJ10(14) 1 Mounting Kit, 0-14°tilt.

Optional Products (order separately)

Model Quantity Description
RCU-003(IV) 1 Remote Control Unit
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 6
DS-Control:2-0-1 / 1212
Outdoor Directional Single-band Antenna
ODV-065R15E-G
 X Pol, 65°Horizontal Beamwidth
 790-960MHz
 15.0dBi, E-Tilt: 0-16

Electrical Specifications
R 790-960
Frequency Range (MHz)
790-896 880-960
Polarization ±45°
Gain (dBi) 14.5 15.0
Horizontal Beamwidth (°) 67 63
Vertical Beamwidth (°) 16.0 14.5
Electrical Downtilt (°) 0-16
1st Upper Sidelobe Suppression (dB) ≥18(0°), ≥16(8°), ≥16(16°)
Upper Sidelobe Suppression, Peak to 20°(dB) ≥14
Front-To-Back Ratio, 180°30° (dB) ≥25
Cross-polar Discrimination@0° (dB) ≥18
VSWR ≤1.5:1
Isolation Intra-system (dB) ≥30
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Maximum Power per Port (W) 500
Impedance (Ω) 50
Lightning Protection Direct Ground

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 1320x265x120 / 52x10.4x4.7
Shipping Dimensions, HxWxD(mm) / (in) 1625x375x250 / 64.0x14.8x9.8
Net Weight, Antenna (kg) / (Ib) 11.3 / 24.9
Net Weight, Mounting Kit (kg) / (Ib) 5.0 / 11.0
Shipping Weight (kg) / (Ib) 20.8 / 45.9
Connector Type 2 x 7/16 DIN-Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -50 to +70
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
378 / 97 / 447
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 7
DS-Control:3-0-7 / 1216
Outdoor Directional Single-band Antenna
ODV-065R15E-G
 X Pol, 65°Horizontal Beamwidth
 790-960MHz
 15.0dBi, E-Tilt: 0-16

Electrical Specifications BASTA Standard**

R 790-960
Frequency Range (MHz)
790-896 880-960
Over All Tilts 14.3±0.6 14.7±0.5
Min Tilt 14.5 15.0
Gain (dBi)
Mid Tilt 14.5 14.9
Max Tilt 14.0 14.1
Horizontal Beamwidth (°) 67±3 63±3
Vertical Beamwidth (°) 16.0±1.2 14.5±1.0
Electrical Downtilt Deviation (°) ≤0.8 ≤1.0
1st Upper Sidelobe Suppression (dB) ≥18 ≥18
Upper Sidelobe Suppression, Peak to 20° (dB) ≥16 ≥16
Front-To-Back Ratio, 180°30° (dB) ≥27 ≥28
Cross-polar Discrimination@0° (dB) ≥20 ≥21
Cross-polar Discrimination over Sector (dB) ≥10 ≥12
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

Connector Position

265

120

Accessories
Model Quantity Description
SJA-B-12R(16) 1 Mounting Kit, 0-16°tilt.

Optional Products (order separately)

Model Quantity Description
RCU-003(IV) 1 Remote Control Unit
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 8
DS-Control:3-0-7 / 1216
Outdoor Directional Single-band Antenna
ODV-065R17E-G
 X Pol, 65°Horizontal Beamwidth
 790-960MHz
 16.6dBi, E-Tilt: 0-10

Electrical Specifications
R 790-960
Frequency Range (MHz)
790-896 880-960
Polarization ±45°
Gain (dBi) 16.0 16.6
Horizontal Beamwidth (°) 66 63
Vertical Beamwidth (°) 10.2 9.3
Electrical Downtilt (°) 0-10
1st Upper Sidelobe Suppression (dB) ≥17(0°), ≥16(5°), ≥16(10°)
Upper Sidelobe Suppression, Peak to 20°(dB) ≥16
Front-To-Back Ratio, 180°30° (dB) ≥25
Cross-polar Discrimination@0°(dB) ≥20
VSWR ≤1.5:1
Isolation Intra-system (dB) ≥30
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Maximum Power per Port(W) 500
Impedance (Ω) 50
Lightning Protection Direct Ground

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 1970x265x120 / 77.6x10.4x4.7
Shipping Dimensions, HxWxD(mm) / (in) 2285x375x250 / 90.0x14.8x9.8
Net Weight, Antenna (kg) / (Ib) 17.0 / 37.5
Net Weight, Mounting Kit (kg) / (Ib) 5.9 / 13.0
Shipping Weight (kg) / (Ib) 26.4 / 58.2
Connector Type 2 x 7/16 DIN-Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -50 to +70
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
595 / 149 / 714
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 9
DS-Control:3-0-6 / 1216
Outdoor Directional Single-band Antenna
ODV-065R17E-G
 X Pol, 65°Horizontal Beamwidth
 790-960MHz
 16.6dBi, E-Tilt: 0-10

Electrical Specifications BASTA Standard**

R 790-960
Frequency Range (MHz)
790-896 880-960
Over All Tilts 16.0±0.5 16.5±0.3
Min Tilt 16.0 16.6
Gain (dBi)
Mid Tilt 16.0 16.5
Max Tilt 15.9 16.4
Horizontal Beamwidth (°) 66±3 63±2
Vertical Beamwidth (°) 10.2±0.7 9.3±0.5
Electrical Downtilt Deviation (°) ≤0.7 ≤0.8
1st Upper Sidelobe Suppression (dB) ≥19 ≥18
Upper Sidelobe Suppression, Peak to 20° (dB) ≥19 ≥18
Front-To-Back Ratio, 180°30° (dB) ≥28 ≥28
Cross-polar Discrimination@0°(dB) ≥20 ≥22
Cross-polar Discrimination over Sector(dB) ≥14 ≥13
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

Connector Position

265

120

Accessories
Model Quantity Description
00-ZJ10(12) 1 Mounting Kit, 0-12°tilt.

Optional Products (order separately)

Model Quantity Description
RCU-003(IV) 1 Remote Control Unit
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 10
DS-Control:3-0-6 / 1216
Outdoor Directional Single-band Antenna
ODV-065R18E-G
 X Pol, 65°Horizontal Beamwidth
 790-960MHz
 17.5dBi, E-Tilt: 0-12

Electrical Specifications
R 790-960
Frequency Range (MHz)
790-896 880-960
Polarization ±45°
Gain (dBi) 17.0 17.5
Horizontal Beamwidth (°) 67 64
Vertical Beamwidth (°) 7.8 7.3
Electrical Downtilt (°) 0-12
1st Upper Sidelobe Suppression (dB) ≥18(0°), ≥18(4°), ≥17(8°), ≥16(12°)
Upper Sidelobe Suppression, Peak to 20° (dB) ≥15
Front-To-Back Ratio, 180°30° (dB) ≥25
Cross-polar Discrimination@0° (dB) ≥20
VSWR ≤1.5:1
Isolation Intra-system (dB) ≥30
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Maximum Power per Port (W) 500
Impedance (Ω) 50
Lightning Protection Direct Ground

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 2610x265x120 / 102.8x10.4x4.7
Shipping Dimensions, HxWxD(mm) / (in) 2915x375x250 / 114.8x14.8x9.8
Net Weight, Antenna (kg) / (Ib) 22.7 / 50.0
Net Weight, Mounting Kit (kg) / (Ib) 5.9 / 13.0
Shipping Weight (kg) / (Ib) 36.6 / 80.7
Connector Type 2 x 7/16 DIN-Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -50 to +70
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
813 / 201 / 971
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 11
DS-Control:3-0-7 / 1216
Outdoor Directional Single-band Antenna
ODV-065R18E-G
 X Pol, 65°Horizontal Beamwidth
 790-960MHz
 17.5dBi, E-Tilt: 0-12

Electrical Specifications BASTA Standard**

R 790-960
Frequency Range (MHz)
790-896 880-960
Over All Tilts 16.7±0.5 17.2±0.6
Min Tilt 17.0 17.5
Gain (dBi)
Mid Tilt 16.7 17.3
Max Tilt 16.2 16.7
Horizontal Beamwidth (°) 67±3 64±2
Vertical Beamwidth (°) 7.8±0.6 7.3±0.5
Electrical Downtilt Deviation (°) ≤0.9 ≤0.8
1st Upper Sidelobe Suppression (dB) ≥18 ≥18
Upper Sidelobe Suppression, Peak to 20° (dB) ≥18 ≥17
Front-To-Back Ratio, 180°30° (dB) ≥29 ≥28
Cross-polar Discrimination@0° (dB) ≥22 ≥20
Cross-polar Discrimination over Sector (dB) ≥11 ≥11
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

Connector Position

265

120

Accessories
Model Quantity Description
00-ZJ10(08) 1 Mounting Kit, 0-8°tilt.

Optional Products (order separately)

Model Quantity Description
RCU-003(IV) 1 Remote Control Unit
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 12
DS-Control:3-0-7 / 1216
Outdoor Directional Single-band Antenna
ODV-065R15M-G
 X Pol, 65°Horizontal Beamwidth
 694-960MHz
 14.8dBi, E-Tilt: 0-14

Electrical Specifications
R 694-960
Frequency Range (MHz)
694-824 790-894 880-960
Polarization ±45°
Gain (dBi) 14.0 14.4 14.8
Horizontal Beamwidth (°) 69 65 61
Vertical Beamwidth (°) 15.4 13.8 12.6
Electrical Downtilt (°) 0-14
1st Upper Sidelobe Suppression (dB) ≥16(0°), ≥15(7°), ≥15(14°)
Upper Sidelobe Suppression, Peak to 20°(dB) ≥15
Front-To-Back Ratio, 180°30° (dB) ≥25
Cross-polar Discrimination@0°(dB) ≥17
Beam Tracking Avg. (dB) 1
VSWR ≤1.5:1
Isolation Intra-system (dB) ≥30
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Maximum Power per Port (W) 500
Impedance (Ω) 50
Lightning Protection Direct Ground

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 1450x320x145 / 57.1x12.6x5.7
Shipping Dimensions,HxWxD(mm) / (in) 1770x430x270 / 69.7x16.9x10.6
Net Weight, Antenna (kg) / (Ib) 13.7 / 30.2
Net Weight, Mounting Kit (kg) / (Ib) 5.0 / 11.0
Shipping Weight (kg) / (Ib) 25.0 / 55.1
Connector Type 2 x 7/16 DIN-Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -50 to +70
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
506 / 126 / 641
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 13
DS-Control:3-0-3 / 1116
Outdoor Directional Single-band Antenna
ODV-065R15M-G
 X Pol, 65°Horizontal Beamwidth
 694-960MHz
 14.8dBi, E-Tilt: 0-14

Electrical Specifications BASTA Standard**

R 694-960
Frequency Range (MHz)
694-824 790-894 880-960
Over All Tilts 13.80.4 14.00.5 14.40.6
Min Tilt 14.0 14.4 14.8
Gain (dBi)
Mid Tilt 13.9 14.2 14.7
Max Tilt 13.6 13.8 14.1
Horizontal Beamwidth (°) 693 654 613
Vertical Beamwidth (°) 15.41.3 13.81.0 12.60.7
Electrical Downtilt Deviation(°) ≤0.7 ≤0.7 ≤0.7
1st Upper Sidelobe Suppression (dB) ≥18 ≥18 ≥17
Upper Sidelobe Suppression, Peak to 20° (dB) ≥18 ≥18 ≥17
Front-To-Back Ratio, 180°30° (dB) ≥27 ≥27 ≥27
Cross-polar Discrimination@0° (dB) ≥18 ≥17 ≥19
Cross-polar Discrimination over Sector (dB) ≥10 ≥8 ≥7
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

Connector Position

320
.

145

Accessories
Model Quantity Description
SJA-B-12R(17) 1 Mounting Kit, 0-17°tilt.

Optional Products (order separately)

Model Quantity Description
RCU-003(IV) 1 Remote Control Unit
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 14
DS-Control:3-0-3 / 1116
Outdoor Directional Single-band Antenna
ODV-065R16M-G
 X Pol, 65°Horizontal Beamwidth
 698-960MHz
 15.8dBi, E-Tilt: 0-10

Electrical Specifications
R 698-960
Frequency Range (MHz)
698-824 790-894 880-960
Polarization ±45°
Gain (dBi) 15.5 15.7 15.8
Horizontal Beamwidth (°) 68 64 61
Vertical Beamwidth (°) 10.6 9.6 8.9
Electrical Downtilt (°) 0-10
1st Upper Sidelobe Suppression (dB) ≥17(0°), ≥16(5°), ≥15(10°)
Upper Sidelobe Suppression, Peak to 20°(dB) ≥16(0°), ≥15(5°), ≥15(10°)
Front-To-Back Ratio, 180°30° (dB) ≥25
Cross-polar Discrimination@0°(dB) ≥17
Cross-polar Discrimination over Sector(dB) ≥9
Beam Tracking Avg. (dB) 1
VSWR ≤1.5:1
Isolation Intra-system (dB) ≥30
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Maximum Power per Port (W) 500
Impedance (Ω) 50
Lightning Protection Direct Ground

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 2000x320x145 / 78.7x12.6x5.7
Shipping Dimensions,HxWxD(mm) / (in) 2340x430x270 / 92.1x16.9x10.6
Net Weight, Antenna (kg) / (Ib) 17.0 / 37.5
Net Weight, Mounting Kit (kg) / (Ib) 6.3 / 13.9
Shipping Weight (kg) / (Ib) 31.0 / 68.3
Connector Type 2 x 7/16 DIN-Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -50 to +70
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
751 / 173 / 960
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 15
DS-Control:3-0-5 / 1216
Outdoor Directional Single-band Antenna
ODV-065R16M-G
 X Pol, 65°Horizontal Beamwidth
 698-960MHz
 15.8dBi, E-Tilt: 0-10

Electrical Specifications BASTA Standard**

R 698-960
Frequency Range (MHz)
698-824 790-894 880-960
Over All Tilts 15.20.5 15.50.4 15.60.4
Min Tilt 15.5 15.7 15.8
Gain (dBi)
Mid Tilt 15.3 15.5 15.6
Max Tilt 14.9 15.2 15.2
Horizontal Beamwidth (°) 683 643 612
Vertical Beamwidth (°) 10.61.3 9.60.5 8.90.7
Electrical Downtilt Deviation (°) ≤0.7 ≤0.7 ≤0.8
1st Upper Sidelobe Suppression (dB) ≥18 ≥18 ≥17
Upper Sidelobe Suppression, Peak to 20° (dB) ≥18 ≥18 ≥17
Front-To-Back Ratio, 180°30° (dB) ≥29 ≥28 ≥28
Cross-polar Discrimination@0° (dB) ≥21 ≥20 ≥19
Cross-polar Discrimination over Sector (dB) ≥11 ≥9 ≥9
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

Connector Position

320
.

145

Accessories
Model Quantity Description
00-ZJ11(08) 1 Mounting Kit, 0-8°tilt.

Optional Products (order separately)

Model Quantity Description
RCU-003(IV) 1 Remote Control Unit
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 16
DS-Control:3-0-5 / 1216
Outdoor Directional Single-band Antenna
ODI-065R16M-G
 X Pol, 65°Horizontal Beamwidth
 694-960MHz
 15.8dBi, E-Tilt: 0-10
 Integrated RCU

Electrical Specifications
R 694-960
Frequency Range (MHz)
694-824 790-894 880-960
Polarization ±45°
Gain (dBi) 15.5 15.7 15.8
Horizontal Beamwidth (°) 68 64 61
Vertical Beamwidth (°) 10.6 9.6 8.9
Electrical Downtilt (°) 0-10
1st Upper Sidelobe Suppression (dB) ≥17(0°), ≥16(5°), ≥15(10°)
Upper Sidelobe Suppression, Peak to 20° (dB) ≥16(0°), ≥15(5°), ≥15(10°)
Front-To-Back Ratio, 180°30° (dB) ≥25
Cross-polar Discrimination@0° (dB) ≥17
Cross-polar Discrimination over Sector (dB) ≥9
VSWR ≤1.5:1
Isolation Intra-system (dB) ≥30
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Maximum Power per Port (W) 500
Impedance (Ω) 50
Lightning Protection Direct Ground

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 2000x298x125 / 78.7x11.7x4.9
Shipping Dimensions, HxWxD(mm) / (in) 2310x385x240 / 90.9x15.2x9.4
Net Weight, Antenna (kg) / (Ib) 15.0 / 33.1
Net Weight, Mounting Kit (kg) / (Ib) 5.9 / 13.0
Shipping Weight (kg) / (Ib) 26.4 / 58.2
Connector Type 2 x 7/16 DIN-Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -40 to +60
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
840 / 142 / 887
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

RET Specifications
Protocol to CCU/TMA 3GPP / AISG 2.0
Input Voltage Range (V) +10 to +30 DC
Power consumption (W) ≤2(stand by); ≤13(operating)
Connectors to CCU 8 pin connector, Male, conform to AISG 2.0
Connectors to RCU 8 pin connector, Female, conform to AISG 2.0
Dimensions, HxWxD (mm) / (in)
100x53x26 / 3.9x2.1x1.0
(excluding connector)
Weight, w/o Mounting Kit (kg) / (lb) 0.16 / 0.35

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 17
DS-Control:0-0-4 / 1116
Outdoor Directional Single-band Antenna
ODI-065R16M-G
 X Pol, 65°Horizontal Beamwidth
 694-960MHz
 15.8dBi, E-Tilt: 0-10
 Integrated RCU

Electrical Specifications BASTA Standard**

R 694-960
Frequency Range (MHz)
694-824 790-894 880-960
Over All Tilts 15.20.5 15.50.4 15.60.4
Min Tilt 15.5 15.7 15.8
Gain (dBi)
Mid Tilt 15.3 15.5 15.6
Max Tilt 14.9 15.2 15.2
Horizontal Beamwidth (°) 683 643 612
Vertical Beamwidth (°) 10.61.3 9.60.5 8.90.7
Electrical Downtilt Deviation (°) ≤0.7 ≤0.7 ≤0.8
1st Upper Sidelobe Suppression (dB) ≥18 ≥18 ≥17
Upper Sidelobe Suppression, Peak to 20° (dB) ≥18 ≥18 ≥17
Front-To-Back Ratio, 180°30° (dB) ≥29 ≥28 ≥28
Cross-polar Discrimination@0° (dB) ≥21 ≥20 ≥19
Cross-polar Discrimination over Sector (dB) ≥11 ≥9 ≥9
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

Connector Position

298

125

Accessories
Model Quantity Description
00-ZJ10(08) 1 Mounting Kit, 0-8°tilt.
iRCU-302 1 Integrated RET Controller

Optional Products (order separately)

Model Quantity Description
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 18
DS-Control:0-0-4 / 1116
Outdoor Directional Single-band Antenna
ODV-065R18K-G V2
 X Pol, 65°Horizontal Beamwidth
 1710-2690MHz
 17.6dBi, E-Tilt: 0-10

Electrical Specifications
B 1710-2170
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170
Polarization ±45°
Gain (dBi) 17.0 17.1 17.6
Horizontal Beamwidth (°) 67 65 63
Vertical Beamwidth (°) 7.5 7.1 6.5
Electrical Downtilt (°) 0-10
1st Upper Sidelobe Suppression (dB) ≥18(0°), ≥17(5°), ≥16(10°)
Upper Sidelobe Suppression, Peak to 20° (dB) ≥16
Front-To-Back Ratio, 180°30° (dB) ≥25
Cross-polar Discrimination@0° (dB) ≥17(typ.)
VSWR ≤1.5:1
Isolation Intra-system (dB) ≥28
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Maximum Power per Port (W) 300
Impedance (Ω) 50
Lightning Protection Direct Ground

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 1310x145x86 / 51.6x5.7x3.4
Shipping Dimensions, HxWxD (mm) / (in) 1505x225x170 / 59.3x8.9x6.7
Net Weight, Antenna (kg) / (Ib) 6.5 / 14.3
Net Weight, Mounting Kit (kg) / (Ib) 1.8 / 4.0
Shipping Weight (kg) / (Ib) 10.9 / 24.0
Connector Type 2 x 7/16 DIN-Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -50 to +70
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
250 / 103 / 259
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 19
DS-Control:1-0-6 / 1116
Outdoor Directional Single-band Antenna
ODV-065R18K-G V2
 X Pol, 65°Horizontal Beamwidth
 1710-2690MHz
 17.6dBi, E-Tilt: 0-10

Electrical Specifications BASTA Standard**

B 1710-2170
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170
Over All Tilts 17.1±0.4 17.3±0.3 17.5±0.4
Min Tilt 17.0 17.1 17.6
Gain (dBi)
Mid Tilt 17.1 17.3 17.5
Max Tilt 17.1 17.3 17.4
Horizontal Beamwidth (°) 67±3 65±3 63±3
Vertical Beamwidth (°) 7.5±0.5 7.1±0.4 6.5±0.7
Electrical Downtilt Deviation (°) ≤0.9 ≤0.7 ≤0.9
1st Upper Sidelobe Suppression (dB) ≥20 ≥18 ≥19
Upper Sidelobe Suppression, Peak to 20° (dB) ≥18 ≥18 ≥18
Front-To-Back Ratio, 180°30° (dB) ≥28 ≥28 ≥27
Cross-polar Discrimination@0° (dB) ≥16 ≥17 ≥17
Cross-polar Discrimination over Sector (dB) ≥12 ≥12 ≥11
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

Connector Position

145

86

Accessories
Model Quantity Description
SJA-B-14D(10) 1 Mounting Kit, 0-10°tilt.

Optional Products (order separately)

Model Quantity Description
RCU-003(IV) 1 Remote Control Unit
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 20
DS-Control:1-0-6 / 1116
Outdoor Directional Single-band Antenna
ODV-065R18J-G V2
 X Pol, 65°Horizontal Beamwidth
 1710-2690MHz
 18.5dBi, E-Tilt: 0-10

Electrical Specifications
Y 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Polarization ±45°
Gain (dBi) 17.3 17.4 17.8 18.2 18.5
Horizontal Beamwidth (°) 68 66 65 63 62
Vertical Beamwidth (°) 8.0 7.4 6.7 5.6 5.2
Electrical Downtilt (°) 0-10
1st Upper Sidelobe Suppression (dB) ≥18(0°), ≥17(5°), ≥16(10°)
Upper Sidelobe Suppression, Peak to 20° (dB) ≥14
Front-to-Back Ratio, 180°30° (dB) ≥26(typ.)
Cross-polar Discrimination@0° (dB) ≥20(typ.)
VSWR ≤1.5:1
Isolation Intra-system (dB) ≥28
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Maximum Power per Port (W) 250
Impedance (Ω) 50
Lightning Protection Direct Ground

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 1400x120x60 / 55.1x4.7x2.4
Shipping Dimensions, HxWxD(mm) / (in) 1630x190x140 / 64.2x7.5x5.5
Net Weight, Antenna (kg) / (Ib) 6.2 / 13.7
Net Weight, Mounting Kit (kg) / (Ib) 1.7 / 3.7
Shipping Weight (kg) / (Ib) 9.7 / 21.4
Connector Type 2 x 7/16 DIN-Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -50 to +70
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
236 / 242 / 72
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 21
DS-Control: 0-0-4 / 1216
Outdoor Directional Single-band Antenna
ODV-065R18J-G V2
 X Pol, 65°Horizontal Beamwidth
 1710-2690MHz
 18.5dBi, E-Tilt: 0-10

Electrical Specifications BASTA Standard**

Y 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Over All Tilts 17.3±0.3 17.4±0.3 17.7±0.3 18.0±0.6 18.2±0.4
Min Tilt 17.3 17.4 17.8 18.2 18.5
Gain (dBi)
Mid Tilt 17.4 17.6 17.9 18.0 18.3
Max Tilt 17.1 17.3 17.4 17.8 17.8
Horizontal Beamwidth (°) 68±3 66±2 65±2 63±4 62±3
Vertical Beamwidth (°) 8.0±0.7 7.4±0.6 6.7±0.5 5.6±0.4 5.2±0.3
Electrical Downtilt Deviation (°) ≤0.6 ≤0.6 ≤0.6 ≤0.6 ≤0.6
1st Upper Sidelobe Suppression (dB) ≥19 ≥20 ≥18 ≥18 ≥18
Upper Sidelobe Suppression, Peak to 20° (dB) ≥18 ≥19 ≥20 ≥15 ≥15
Front-to-Back Ratio, 180°30° (dB) ≥28 ≥29 ≥27 ≥28 ≥28
Cross-polar Discrimination@0° (dB) ≥28 ≥30 ≥29 ≥22 ≥21
Cross-polar Discrimination over Sector (dB) ≥16 ≥15 ≥11 ≥10 ≥8
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

Connector Position

120

60

Accessories
Model Quantity Description
SJA-B-14F(10) 1 Mounting Kit, 0-10°tilt.

Optional Products (order separately)

Model Quantity Description
RCU-003(IV) 1 Remote Control Unit
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 22
DS-Control: 0-0-4 / 1216
Outdoor Directional Single-band Antenna
ODV-090R17E-G
 X Pol, 90°Horizontal Beamwidth
 790-960MHz
 16.5dBi, E-Tilt: 0-12

Electrical Specifications
R 790-960
Frequency Range (MHz)
790-896 880-960
Polarization ±45°
Gain (dBi) 16.0 16.5
Horizontal Beamwidth (°) 85 84
Vertical Beamwidth (°) 7.8 7.0
Electrical Downtilt (°) 0-12
1st Upper Sidelobe Suppression (dB) ≥18(0°), ≥16(6°), ≥16(12°)
Front-To-Back Ratio, 180°30° (dB) ≥25
Cross-polar Discrimination@0° (dB) ≥17
VSWR ≤1.5:1
Isolation Intra-system (dB) ≥30
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Maximum Power per Port (W) 500
Impedance (Ω) 50
Lightning Protection Direct Ground

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 2610x265x145 / 102.8x10.4x5.7
Shipping Dimensions, HxWxD(mm) / (in) 2915x375x275 / 114.8x14.8x10.8
Net Weight, Antenna (kg) / (Ib) 24.3 / 53.6
Net Weight, Mounting Kit (kg) / (Ib) 5.9 / 13
Shipping Weight (kg) / (Ib) 37.5 / 82.7
Connector Type 2x 7/16 DIN-Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -50 to +70
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
836 / 288 / 828
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 23
DS-Control:3-0-7 / 1116
Outdoor Directional Single-band Antenna
ODV-090R17E-G
 X Pol, 90°Horizontal Beamwidth
 790-960MHz
 16.5dBi, E-Tilt: 0-12

Electrical Specifications BASTA Standard**

R 790-960
Frequency Range (MHz)
790-896 880-960
Over All Tilts 15.8±0.4 16.2±0.5
Min Tilt 16.0 16.5
Gain (dBi)
Mid Tilt 15.9 16.4
Max Tilt 15.4 15.8
Horizontal Beamwidth (°) 85±3 84±3
Vertical Beamwidth (°) 7.8±0.6 7.0±0.5
Electrical Downtilt Deviation (°) ≤0.7 ≤0.7
1st Upper Sidelobe Suppression (dB) ≥17 ≥17
Upper Sidelobe Suppression, Peak to 20° (dB) ≥17 ≥17
Front-To-Back Ratio, 180°30° (dB) ≥27 ≥26
Cross-polar Discrimination@0° (dB) ≥20 ≥22
Cross-polar Discrimination over Sector (dB) ≥10 ≥8
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

Connector Position

265

145

Accessories
Model Quantity Description
00-ZJ10(08) 1 Mounting Kit, 0-8°tilt.

Optional Products (order separately)

Model Quantity Description
RCU-003(IV) 1 Remote Control Unit
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 24
DS-Control:3-0-7 / 1116
Outdoor Directional Single-band Antenna
ODV-090R17K
 X Pol, 65°Horizontal Beamwidth
 1710-2170MHz
 16.3dBi, E-Tilt: 0-10

Electrical Specifications
B 1710-2170
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170
Polarization 45°
Gain (dBi) 16.2 16.3 16.3
Horizontal Beamwidth (°) 86 88 89
Vertical Beamwidth (°) 7.2 6.8 6.3
Electrical Downtilt (°) 0-10
1st Upper Sidelobe Suppression (dB) ≥18(0°), ≥17(5°), ≥16(10°)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥18
VSWR ≤1.5:1
Isolation Intra-system (dB) ≥30
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Maximum Power per Port (W) 300
Impedance (Ω) 50
Lightning Protection Direct Ground

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 1310x145x86 / 51.6x5.7x3.4
Shipping Dimensions, HxWxD (mm) / (in) 1490x225x170 / 58.7x8.9x6.7
Net Weight, Antenna (kg) / (Ib) 6.5 / 14.3
Net Weight, Mounting Kit (kg) / (Ib) 1.7 / 3.7
Shipping Weight (kg) / (Ib) 10.8 / 23.8
Connector Type 2 x 7/16 DIN-Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -50 to +70
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
250 / 104 / 259
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 25
DS-Control:2-0-4 / 1216
Outdoor Directional Single-band Antenna
ODV-090R17K
 X Pol, 65°Horizontal Beamwidth
 1710-2170MHz
 16.3dBi, E-Tilt: 0-10

Electrical Specifications BASTA Standard**

B 1710-2170
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170
Over All Tilts 16.2±0.3 16.4±0.3 16.3±0.4
Min Tilt 16.2 16.3 16.3
Gain (dBi)
Mid Tilt 16.3 16.5 16.4
Max Tilt 16.2 16.2 16.0
Horizontal Beamwidth (°) 86±3 88±3 89±4
Vertical Beamwidth (°) 7.2±0.5 6.8±0.4 6.3±0.5
Electrical Downtilt Deviation (°) ≤0.5 ≤0.4 ≤0.5
1st Upper Sidelobe Suppression (dB) ≥18 ≥17 ≥17
Upper Sidelobe Suppression, Peak to 20° (dB) ≥16 ≥16 ≥16
Front-To-Back Ratio, 180°30° (dB) ≥25 ≥24 ≥23
Cross-polar Discrimination@0° (dB) ≥19 ≥20 ≥21
Cross-polar Discrimination over Sector (dB) ≥7 ≥7 ≥7
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

Connector Position

145

86

Accessories
Model Quantity Description
SJA-B-14D(10) 1 Mounting Kit, 0-10°tilt.

Optional Products (order separately)

Model Quantity Description
RCU-003(IV) 1 Remote Control Unit
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 26
DS-Control:2-0-4 / 1216
Outdoor Directional Dual-band Antenna
ODV2-065R17E-G
 XX Pol, 65°Horizontal Beamwidth
 790-960/790-960MHz
 16.5/16.5dBi, E-Tilt: 0-10/0-10

Electrical Specifications
R1 790-960, R2 790-960
Frequency Range (MHz)
790-896 880-960
Polarization ±45°
Gain (dBi) 16.0 16.5
Horizontal Beamwidth (°) 68 63
Vertical Beamwidth (°) 10.0 9.2
Electrical Downtilt (°) 0-10 / 0-10
1st Upper Sidelobe Suppression (dB) ≥18(0°), ≥17(5°), ≥16(10°)
Upper Sidelobe Suppression, Peak to 20°(dB) ≥16
Front-To-Back Ratio, 180°30° (dB) ≥25
Cross-polar Discrimination@0°(dB) ≥18
VSWR ≤1.5:1
Isolation Intra-system (dB) ≥30
Isolation Inter-system (dB) ≥30
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Maximum Power per Port (W) 500
Impedance (Ω) 50
Lightning Protection Direct Ground

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 1970x500x140 / 77.6x19.7x5.5
Shipping Dimensions, HxWxD(mm) / (in) 2330x635x305 / 91.7x25.0x12.0
Net Weight, Antenna (kg) / (Ib) 35.0 / 77.2
Net Weight, Mounting Kit (kg) / (Ib) 10.3 / 22.7
Shipping Weight (kg) / (Ib) 53.0 / 116.8
Connector Type 4 x 7/16 DIN-Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -50 to +70
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
1397 / 162 / 1736
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 27
DS-Control:3-0-2 / 1216
Outdoor Directional Dual-band Antenna
ODV2-065R17E-G
 XX Pol, 65°Horizontal Beamwidth
 790-960/790-960MHz
 16.5/16.5dBi, E-Tilt: 0-10/0-10

Electrical Specifications BASTA Standard**

R1 790-960, R2 790-960
Frequency Range (MHz)
790-896 880-960
Over All Tilts 15.9±0.6 16.4±0.4
Min Tilt 16.0 16.5
Gain (dBi)
Mid Tilt 16.0 16.4
Max Tilt 15.8 16.1
Horizontal Beamwidth (°) 68±4 63±3
Vertical Beamwidth (°) 10.0±0.6 9.2±0.6
Electrical Downtilt Deviation (°) ≤0.6 ≤0.6
1st Upper Sidelobe Suppression (dB) ≥19 ≥19
Upper Sidelobe Suppression, Peak to 20° (dB) ≥18 ≥18
Front-To-Back Ratio, 180°30° (dB) ≥26 ≥28
Cross-polar Discrimination@0°(dB) ≥20 ≥21
Cross-polar Discrimination over Sector(dB) ≥10 ≥12
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

Connector Position Configuration Types

500

140

Connector Labeling***
Connect Code Frequency range Array
R1 790-960 r
R2 790-960 l
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
00-ZJ11(12) (three mounting points) 1 Mounting Kit, 0-12°tilt.

Optional Products (order separately)

Model Quantity Description
RCU-003(IV) 2 Remote Control Unit
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 28
DS-Control:3-0-2 / 1216
Outdoor Directional Dual-band Antenna
ODV2-065R15M-G
 XXPol, 65°Horizontal Beamwidth
 694-960/694-960MHz
 14.5/14.5dBi, E-Tilt: 0-14/0-14

Electrical Specifications
R1 694-960, R2 694-960
Frequency Range (MHz)
694-824 790-894 880-960
Polarization ±45°
Gain (dBi) 13.5 14.1 14.5
Horizontal Beamwidth (°) 63 59 55
Vertical Beamwidth (°) 17.4 15.7 14.2
Electrical Downtilt (°) 0-14 / 0-14
1st Upper Sidelobe Suppression (dB) ≥15(0°), ≥14(7°), ≥14(14°)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥18(typ.)
VSWR ≤1.5:1
Isolation Intra-system (dB) ≥25
Isolation Inter-system (dB) ≥25
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Maximum Power per Port (W) 500
Impedance (Ω) 50
Lightning Protection Direct Ground

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 1500x445x130 / 59.1x17.5x5.1
Shipping Dimensions, HxWxD(mm) / (in) 1805x570x285 / 71.1x22.4x11.2
Net Weight, Antenna (kg) / (Ib) 21.0 / 46.3
Net Weight, Mounting Kit (kg) / (Ib) 5.9 / 13.0
Shipping Weight (kg) / (Ib) 32.0 / 70.5
Connector Type 4 x 7/16 DIN-Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -50 to +70
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
810 / 102 / 975
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 29
DS-Control:0-0-10 / 1116
Outdoor Directional Dual-band Antenna
ODV2-065R15M-G
 XXPol, 65°Horizontal Beamwidth
 694-960/694-960MHz
 14.5/14.5dBi, E-Tilt: 0-14/0-14

Electrical Specifications BASTA Standard**

R1 694-960, R2 694-960
Frequency Range (MHz)
694-824 790-894 880-960
Over All Tilts 13.3±0.8 13.9±0.5 14.2±0.6
Min Tilt 13.5 14.1 14.5
Gain (dBi)
Mid Tilt 13.3 13.9 14.2
Max Tilt 13.1 13.8 14.0
Horizontal Beamwidth (°) 63±8 59±6 55±5
Vertical Beamwidth (°) 17.4±1.6 15.7±1.2 14.2±0.9
Electrical Downtilt Deviation (°) ≤1.0 ≤1.0 ≤1.0
1st Upper Sidelobe Suppression (dB) ≥17 ≥18 ≥17
Upper Sidelobe Suppression, Peak to 20° (dB) ≥19 ≥18 ≥17
Front-To-Back Ratio, 180°30° (dB) ≥25 ≥25 ≥25
Cross-polar Discrimination@0° (dB) ≥18 ≥21 ≥20
Cross-polar Discrimination over Sector (dB) ≥9 ≥9 ≥9
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

Connector Position Configuration Types

445

130

Connector Labeling***
Connect Code Frequency range Array
R1 694-960 l
R2 694-960 r
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
00-ZJ10(16) 1 Mounting Kit, 0-16°tilt.

Optional Products (order separately)

Model Quantity Description
RCU-003(IV) 2 Remote Control Unit
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 30
DS-Control:0-0-10 / 1116
Outdoor Directional Dual-band Antenna
ODV2-065R18K-G V1
 XX Pol, 65°Horizontal Beamwidth
 1710-2170/1710-2170MHz
 17.8/17.8dBi, E-Tilt: 0-10/0-10

Electrical Specifications
B1 1710-2170, B2 1710-2170
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170
Polarization ±45°
Gain (dBi) 17.4 17.6 17.8
Horizontal Beamwidth (°) 68 66 64
Vertical Beamwidth (°) 7.2 6.8 6.3
Electrical Downtilt (°) 0-10 / 0-10
1st Upper Sidelobe Suppression (dB) ≥18(0°), ≥17(5°), ≥16(10°)
Upper Sidelobe Suppression, Peak to 20° (dB) ≥16
Front-to-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥18
Maximum Power per Port (W) 300
VSWR ≤1.5:1
Isolation Intra-system (dB) ≥30
Isolation Inter-system (dB) ≥30
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Impedance (Ω) 50
Lightning Protection Direct Ground

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 1310x249x60 / 51.6x9.8x2.4
Shipping Dimensions HxWxD (mm) / (in)
1645x360x175 / 64.8x14.2x6.9
(Single Package)
Shipping Dimensions HxWxD (mm) / (in)
1613x367x312 / 63.5x14.4x12.3
(3 in 1 Package)
Net Weight, Antenna (kg) / (Ib) 10.0 / 22.0
Net Weight, Mounting Kit (kg) / (Ib)
5.0 / 11.0
(Single Package)
Net Weight, Mounting Kit (kg) / (Ib)
2.8 / 6.2
(3 in 1 Package)
Shipping Weight (kg) / (Ib)
18.2 / 40.1
(Single Package)
Shipping Weight (kg) / (Ib)
43.0 / 94.8
(3 in 1 Package)
Connector Type 4 x 7/16 DIN-Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -50 to +70
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
440 / 50 / 490
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 31
DS-Control: 3-0-8 / 1216
Outdoor Directional Dual-band Antenna
ODV2-065R18K-G V1
 XX Pol, 65°Horizontal Beamwidth
 1710-2170/1710-2170MHz
 17.8/17.8dBi, E-Tilt: 0-10/0-10

Electrical Specifications BASTA Standard**

B1 1710-2170, B2 1710-2170
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170
Over All Tilts 17.1±0.4 17.3±0.5 17.4±0.6
Min Tilt 17.4 17.6 17.8
Gain (dBi)
Mid Tilt 17.1 17.3 17.6
Max Tilt 16.7 16.9 16.9
Horizontal Beamwidth (°) 68±2 66±3 64±3
Vertical Beamwidth (°) 7.2±0.4 6.8±0.4 6. 3±0.5
Electrical Downtilt Deviation (°) ≤0.4 ≤0.4 ≤0.5
1st Upper Sidelobe Suppression (dB) ≥19 ≥19 ≥18
Upper Sidelobe Suppression, Peak to 20° (dB) ≥19 ≥19 ≥19
Front-to-Back Ratio, 180°30° (dB) ≥27 ≥28 ≥29
Cross-polar Discrimination@0° (dB) ≥27 ≥25 ≥25
Cross-polar Discrimination over Sector (dB) ≥13 ≥11 ≥11
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

Connector Position Configuration Types

249

60

Connector Labeling***
Connect Code Frequency range Array
B1 1710-2170 l
B2 1710-2170 r
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
SJA-B-12R(16) (For single package) 1 Mounting Kit, 0-16°tilt.
00-ZJ15(16) (For 3 in 1 package) 1 Mounting Kit, 0-16°tilt.

Optional Products (order separately)

Model Quantity Description
RCU-003(IV) 2 Remote Control Unit
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 32
DS-Control: 3-0-8 / 1216
Outdoor Directional Dual-band Antenna
ODI2-065R18K-GQ
 XX Pol, 65°Horizontal Beamwidth
 1710-2170/1710-2170MHz
 17.8/17.8dBi, E-Tilt: 0-10/0-10
 Integrated RCU

Electrical Specifications
B1 1710-2170, B2 1710-2170
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170
Polarization ±45°
Gain (dBi) 17.4 17.6 17.8
Horizontal Beamwidth (°) 68 66 64
Vertical Beamwidth (°) 7.2 6.8 6.3
Electrical Downtilt (°) 0-10 / 0-10
1st Upper Sidelobe Suppression (dB) ≥18(0°), ≥17(5°), ≥16(10°)
Upper Sidelobe Suppression, Peak to 20° (dB) ≥16
Front-To-Back Ratio, 180°30° (dB) ≥25
Cross-polar Discrimination@0° (dB) ≥18
Beam Tracking Avg. (dB) 2
VSWR ≤1.5:1
Isolation Intra-system (dB) ≥29
Isolation Inter-system (dB) ≥29
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Maximum Power per Port (W) 300
Impedance (Ω) 50
Lightning Protection Direct Ground

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 1360x249x60 / 53.5x9.8x2.4
Shipping Dimensions, HxWxD(mm) / (in) 1645x360x175 / 64.8x14.2x6.9
Net Weight, Antenna (kg) / (Ib) 11.4 / 25.1
Net Weight, Mounting Kit (kg) / (Ib) 2.8 / 6.2
Shipping Weight (kg) / (Ib) 17.3 / 38.1
Connector Type 4 x 4.3-10 Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -40 to +60
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
456 / 51 / 507
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

RET Specifications
Protocol to CCU/TMA 3GPP / AISG 2.0
Input Voltage Range (V) +10 to +30 DC
Power Consumption (W) ≤2(stand by); ≤13(operating)
Connectors to CCU 8 pin connector, Male, conform to AISG 2.0
Connectors to RCU 8 pin connector, Female, conform to AISG 2.0
Dimensions, HxWxD (mm) / (in)
100x53x26 / 3.9x2.1x1.0
(excluding connector)
Weight, w/o Mounting Kit (kg) / (lb) 0.16 / 0.35

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 33
DS-Control: 1-0-3 / 1116
Outdoor Directional Dual-band Antenna
ODI2-065R18K-GQ
 XX Pol, 65°Horizontal Beamwidth
 1710-2170/1710-2170MHz
 17.8/17.8dBi, E-Tilt: 0-10/0-10
 Integrated RCU

Electrical Specifications BASTA Standard**

B1 1710-2170, B2 1710-2170
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170
Over All Tilts 17.3±0.4 17.5±0.3 17.6±0.4
Min Tilt 17.4 17.6 17.8
Gain (dBi)
Mid Tilt 17.5 17.7 17.8
Max Tilt 17.0 17.2 17.3
Horizontal Beamwidth (°) 68±3 66±3 64±2
Vertical Beamwidth (°) 7.2±0.6 6.8±0.4 6.3±0.7
Electrical Downtilt Deviation (°) ≤0.5 ≤0.5 ≤0.5
1st Upper Sidelobe Suppression (dB) ≥20 ≥20 ≥19
Upper Sidelobe Suppression, Peak to 20° (dB) ≥18 ≥18 ≥17
Front-To-Back Ratio, 180°30° (dB) ≥28 ≥27 ≥27
Cross-polar Discrimination@0° (dB) ≥29 ≥30 ≥26
Cross-polar Discrimination over Sector (dB) ≥12 ≥10 ≥10
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

Connector Position Configuration Types

249

60 B2 B1
.

Connector Labeling***
Connect Code Frequency Range Array
B1 1710-2170 r
B2 1710-2170 l
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
00-ZJ15A(16) 1 Mounting Kit, 0-16°tilt.
iRCU-302 1 Integrated RET Controller

Optional Products (order separately)

Model Quantity Description
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 34
DS-Control: 1-0-3 / 1116
Outdoor Directional Dual-band Antenna
ODV2-065R21K-G V1
 XX Pol, 65°Horizontal Beamwidth
 1710-2170/1710-2170MHz
 19.0/19.0dBi, E-Tilt: 0-8/0-8

Electrical Specifications
B1 1710-2170, B2 1710-2170
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170
Polarization 45°
Gain (dBi) 18.8 18.9 19.0
Horizontal Beamwidth (°) 67 65 65
Vertical Beamwidth (°) 4.9 4.6 4.4
Electrical Downtilt (°) 0-8 / 0-8
1st Upper Sidelobe Suppression (dB) ≥17(0°), ≥16(4°), ≥15(8°)
Upper Sidelobe Suppression, Peak to 20° (dB) ≥13
Front-To-Back Ratio, 180°30° (dB) ≥25
Cross-polar Discrimination@0° (dB) ≥18
VSWR ≤1.5:1
Isolation Intra-system (dB) ≥30
Isolation Inter-system (dB) ≥30
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Maximum Power per Port (W) 300
Impedance (Ω) 50
Lightning Protection Direct Ground

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 1960x249x60 / 77.2x9.8x2.4
Shipping Dimensions, HxWxD(mm) / (in) 2295x360x175 / 90.4x14.2x6.9
Net Weight, Antenna (kg) / (Ib) 14.0 / 30.9
Net Weight, Mounting Kit (kg) / (Ib) 5.9 / 13.0
Shipping Weight (kg) / (Ib) 22.3 / 49.2
Connector Type 4 x 7/16 DIN-Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -50 to +70
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
734 / 77 / 803
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 35
DS-Control: 3-0-5 / 1216
Outdoor Directional Dual-band Antenna
ODV2-065R21K-G V1
 XX Pol, 65°Horizontal Beamwidth
 1710-2170/1710-2170MHz
 19.0/19.0dBi, E-Tilt: 0-8/0-8

Electrical Specifications BASTA Standard**

B1 1710-2170, B2 1710-2170
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170
Over All Tilts 18.7±0.5 18.8±0.4 18.9±0.6
Min Tilt 18.8 18.9 19.0
Gain (dBi)
Mid Tilt 18.8 18.8 19.0
Max Tilt 18.6 18.7 18.8
Horizontal Beamwidth (°) 67±3 65±3 65±3
Vertical Beamwidth (°) 4.9±0.3 4.6±0.3 4.4±0.3
Electrical Downtilt Deviation (°) ≤0.5 ≤0.4 ≤0.4
1st Upper Sidelobe Suppression (dB) ≥17 ≥18 ≥18
Upper Sidelobe Suppression, Peak to 20° (dB) ≥16 ≥13 ≥13
Front-To-Back Ratio, 180°30° (dB) ≥28 ≥28 ≥28
Cross-polar Discrimination@0° (dB) ≥23 ≥22 ≥20
Cross-polar Discrimination over Sector (dB) ≥12 ≥11 ≥10
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

Connector Position Configuration Types

249

B2 B1
60

Connector Labeling***
Connect Code Frequency Range Array
B1 1710-2170 r
B2 1710-2170 l
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
00-ZJ10(12) 1 Mounting Kit, 0-12°tilt.

Optional Products (order separately)

Model Quantity Description
RCU-003(IV) 2 Remote Control Unit
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 36
DS-Control: 3-0-5 / 1216
Outdoor Directional Dual-band Antenna
ODV2-065R16J-G V1
 XX Pol, 65°Horizontal Beamwidth
 1710-2690/1710-2690MHz
 16.6/16.6dBi, E-Tilt: 0-12/0-12

Electrical Specifications
Y1 1710-2690, Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Polarization ±45°
Gain (dBi) 15.4 15.7 16.0 16.2 16.6
Horizontal Beamwidth (°) 68 66 65 63 62
Vertical Beamwidth (°) 11.5 10.6 10.1 8.6 7.8
Electrical Downtilt (°) 0-12 / 0-12
1st Upper Sidelobe Suppression (dB) ≥16
Upper Sidelobe Suppression, Peak to 20° (dB) ≥15
Front-To-Back Ratio, 180°30° (dB) ≥25
Cross-polar Discrimination@0° (dB) ≥18
VSWR ≤1.5:1
Isolation Intra-system (dB) ≥28
Isolation Inter-system (dB) ≥28
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Maximum Power per Port (W) 250
Impedance (Ω) 50
Lightning Protection Direct Ground

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 900x249x60 / 35.4x9.8x2.4
Shipping Dimensions, HxWxD(mm) / (in) 1160x360x175 / 45.7x14.2x6.9
Net Weight, Antenna (kg) / (Ib) 7.8 / 17.2
Net Weight, Mounting Kit (kg) / (Ib) 2.8 / 6.2
Shipping Weight (kg) / (Ib) 12.6 / 27.8
Connector Type 4 x 4.3-10 Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -50 to +70
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
276 / 34 / 307
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 37
DS-Control:0-0-1 / 1216
Outdoor Directional Dual-band Antenna
ODV2-065R16J-G V1
 XX Pol, 65°Horizontal Beamwidth
 1710-2690/1710-2690MHz
 16.6/16.6dBi, E-Tilt: 0-12/0-12

Electrical Specifications BASTA Standard**

Y1 1710-2690, Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Over All Tilts 15.3±0.4 15.6±0.4 15.8±0.4 16.1±0.5 16.4±0.5
Min Tilt 15.4 15.7 16.0 16.2 16.6
Gain (dBi)
Mid Tilt 15.2 15.5 15.8 16.0 16.4
Max Tilt 15.0 15.3 15.6 15.8 16.2
Horizontal Beamwidth (°) 68±4 66±4 65±5 63±5 62±4
Vertical Beamwidth (°) 11.5±0.8 10.6±0.5 10.1±0.9 8.6±0.6 7.8±0.4
Electrical Downtilt Deviation (°) ≤0.9 ≤0.9 ≤0.8 ≤0.6 ≤0.6
1st Upper Sidelobe Suppression (dB) ≥20 ≥18 ≥17 ≥18 ≥18
Upper Sidelobe Suppression, Peak to 20° (dB) ≥19 ≥18 ≥17 ≥15 ≥15
Front-To-Back Ratio, 180°30° (dB) ≥26 ≥26 ≥27 ≥27 ≥26
Cross-polar Discrimination@0° (dB) ≥20 ≥29 ≥19 ≥18 ≥17
Cross-polar Discrimination over Sector (dB) ≥15 ≥15 ≥12 ≥11 ≥10
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

Connector Position Configuration Types

249

Y2 Y1
60

Connector Labeling***
Connect Code Frequency range Array
Y1 1710-2690 r
Y2 1710-2690 l
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
00-ZJ15A(25) 1 Mounting Kit, 0-25°tilt.

Optional Products (order separately)

Model Quantity Description
RCU-003(IV) 2 Remote Control Unit
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 38
DS-Control:0-0-1 / 1216
Outdoor Directional Dual-band Antenna
ODV2-065R18J-G V2
 XX Pol, 65°Horizontal Beamwidth
 1710-2690/1710-2690MHz
 18.5/18.5dBi, E-Tilt: 0-10/0-10

Electrical Specifications
Y1 1710-2690, Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Polarization ±45°
Gain (dBi) 17.3 17.4 17.8 18.2 18.5
Horizontal Beamwidth (°) 68 66 65 63 62
Vertical Beamwidth (°) 8.0 7.4 6.7 5.6 5.2
Electrical Downtilt (°) 0-10 / 0-10
1st Upper Sidelobe Suppression (dB) ≥18(0°), ≥17(5°), ≥16(10°)
Upper Sidelobe Suppression, Peak to 20° (dB) ≥14
Front-To-Back Ratio, 180°30° (dB) ≥26
Cross-polar Discrimination@0° (dB) ≥20
VSWR ≤1.5:1
Isolation Intra-system (dB) ≥28
Isolation Inter-system (dB) ≥28
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Maximum Power per Port (W) 250
Impedance (Ω) 50
Lightning Protection Direct Ground

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 1380x249x60 / 54.3x9.8x2.4
Shipping Dimensions, HxWxD(mm) / (in) 1725x360x175 / 67.9x14.2x6.9
Net Weight, Antenna (kg) / (Ib) 12.0 / 26.5
Net Weight, Mounting Kit (kg) / (Ib) 5.0 / 11.0
Shipping Weight (kg) / (Ib) 19.5 / 43.0
Connector Type 4 x 7/16 DIN-Female

1120
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -50 to +70
Operational Humidity (%) ≤95 68
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
471 / 53 / 523
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 39
DS-Control:1-0-3 / 1216
Outdoor Directional Dual-band Antenna
ODV2-065R18J-G V2
 XX Pol, 65°Horizontal Beamwidth
 1710-2690/1710-2690MHz
 18.5/18.5dBi, E-Tilt: 0-10/0-10

Electrical Specifications BASTA Standard**

Y1 1710-2690, Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Over All Tilts 17.3±0.3 17.4±0.3 17.7±0.3 18.0±0.6 18.2±0.4
Min Tilt 17.3 17.4 17.8 18.2 18.5
Gain (dBi)
Mid Tilt 17.4 17.6 17.9 18.0 18.3
Max Tilt 17.1 17.3 17.4 17.8 17.8
Horizontal Beamwidth (°) 68±3 66±2 65±2 63±4 62±3
Vertical Beamwidth (°) 8.0±0.7 7.4±0.6 6.7±0.5 5.6±0.4 5.2±0.3
Electrical Downtilt Deviation (°) ≤0.6 ≤0.6 ≤0.6 ≤0.6 ≤0.6
1st Upper Sidelobe Suppression (dB) ≥19 ≥20 ≥18 ≥18 ≥18
Upper Sidelobe Suppression, Peak to 20° (dB) ≥18 ≥19 ≥20 ≥15 ≥15
Front-To-Back Ratio, 180°30° (dB) ≥28 ≥29 ≥27 ≥28 ≥28
Cross-polar Discrimination@0° (dB) ≥28 ≥30 ≥29 ≥22 ≥21
Cross-polar Discrimination over Sector (dB) ≥16 ≥15 ≥11 ≥10 ≥8
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

Connector Position Configuration Types

249

Y2 Y1
60

Connector Labeling***
Connect Code Frequency range Array
Y1 1710-2690 r
Y2 1710-2690 l
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
SJA-B-12R(16) 1 Mounting Kit, 0-16°tilt.

Optional Products (order separately)

Model Quantity Description
RCU-003(IV) 2 Remote Control Unit
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 40
DS-Control:1-0-3 / 1216
Outdoor Directional Dual-band Antenna
ODI2-065R18J-GQ
 XX Pol, 65°Horizontal Beamwidth
 1710-2690/1710-2690MHz
 18.5/18.5dBi, E-Tilt: 0-10/0-10
 Integrated RCU

Electrical Specifications
Y1 1710-2690, Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Polarization ±45°
Gain (dBi) 17.3 17.4 17.8 18.2 18.5
Horizontal Beamwidth (°) 68 66 65 63 62
Vertical Beamwidth (°) 8.0 7.4 6.7 5.6 5.2
Electrical Downtilt (°) 0-10 / 0-10
1st Upper Sidelobe Suppression (dB) ≥18(0°), ≥17(5°), ≥16(10°)
Upper Sidelobe Suppression, Peak to 20° (dB) ≥14
Front-To-Back Ratio, 180°30° (dB) ≥26(typ.)
Cross-polar Discrimination@0° (dB) ≥20(typ.)
VSWR ≤1.5:1
Isolation Intra-system (dB) ≥28
Isolation Inter-system (dB) ≥28
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Maximum Power per Port (W) 250
Impedance (Ω) 50
Lightning Protection Direct Ground

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 1450x249x60 / 57.1x9.8x2.4
Shipping Dimensions, HxWxD(mm) / (in) 1785x360x175 / 70.3x14.2x6.9
Net Weight, Antenna (kg) / (Ib) 13.5 / 29.8
Net Weight, Mounting Kit (kg) / (Ib) 5.0 / 11.0
Shipping Weight (kg) / (Ib) 21.7 / 47.8
Connector Type 4 x 4.3-10 Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -40 to +60
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
502 / 56 / 557
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

RET Specifications
Protocol to CCU/TMA 3GPP / AISG 2.0
Input Voltage Range (V) +10 to +30 DC
Power Consumption (W) ≤2(stand by); ≤13(operating)
Connectors to CCU 8 pin connector, Male, conform to AISG 2.0
Connectors to RCU 8 pin connector, Female, conform to AISG 2.0
Dimensions, HxWxD (mm) / (in)
100x53x26 / 3.9x2.1x1.0
(excluding connector)
Weight, w/o Mounting Kit (kg) / (lb) 0.16 / 0.35

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 41
DS-Control: 0-0-2 / 1116
Outdoor Directional Dual-band Antenna
ODI2-065R18J-GQ
 XX Pol, 65°Horizontal Beamwidth
 1710-2690/1710-2690MHz
 18.5/18.5dBi, E-Tilt: 0-10/0-10
 Integrated RCU

Electrical Specifications BASTA Standard**

Y1 1710-2690, Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Over All Tilts 17.3±0.3 17.4±0.3 17.7±0.3 18.0±0.6 18.2±0.4
Min Tilt 17.3 17.4 17.8 18.2 18.5
Gain (dBi)
Mid Tilt 17.4 17.6 17.9 18.0 18.3
Max Tilt 17.1 17.3 17.4 17.8 17.8
Horizontal Beamwidth (°) 68±3 66±2 65±2 63±4 62±3
Vertical Beamwidth (°) 8.0±0.7 7.4±0.6 6.7±0.5 5.6±0.4 5.2±0.3
Electrical Downtilt Deviation (°) ≤0.6 ≤0.6 ≤0.6 ≤0.6 ≤0.6
1st Upper Sidelobe Suppression (dB) ≥19 ≥20 ≥18 ≥18 ≥18
Upper Sidelobe Suppression, Peak to 20° (dB) ≥18 ≥19 ≥20 ≥15 ≥15
Front-To-Back Ratio, 180°30° (dB) ≥28 ≥29 ≥27 ≥28 ≥28
Cross-polar Discrimination@0° (dB) ≥28 ≥30 ≥29 ≥22 ≥21
Cross-polar Discrimination over Sector (dB) ≥16 ≥15 ≥11 ≥10 ≥8
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

Connector Position Configuration Types

249

60 Y2 Y1
.

Connector Labeling***
Connect Code Frequency Range Array
Y1 1710-2690 r
Y2 1710-2690 l
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
SJA-B-12R(16) 1 Mounting Kit, 0-16°tilt.
iRCU-302 1 Integrated RET Controller

Optional Products (order separately)

Model Quantity Description
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 42
DS-Control: 0-0-2 / 1116
Outdoor Directional Dual-band Antenna
ODV-065R17E18K-G V1
 XX Pol, 65°Horizontal Beamwidth
 790-960/1710-2170MHz
 16.5/17.3dBi, E-Tilt: 0-10/0-10

Electrical Specifications
R1 790-960
Frequency Range (MHz)
790-896 880-960
Polarization ±45°
Gain (dBi) 16.0 16.5
Horizontal Beamwidth (°) 68 65
Vertical Beamwidth (°) 10.5 9.7
Electrical Downtilt (°) 0-10
1st Upper Sidelobe Suppression (dB) ≥18(0°), ≥17(5°), ≥17(10°)
Upper Sidelobe Suppression, Peak to 20° (dB) ≥16
Front-To-Back Ratio, 180°30° (dB) ≥25
Cross-polar Discrimination@0° (dB) ≥18
Cross-polar Discrimination over Sector (dB) ≥10
Beam Tracking Avg. (dB) 2
Maximum Power per Port (W) 500

B1 1710-2170
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170
Polarization ±45°
Gain (dBi) 17.0 17.1 17.3
Horizontal Beamwidth (°) 65 64 62
Vertical Beamwidth (°) 6.8 6.4 6.0
Electrical Downtilt (°) 0-10
1st Upper Sidelobe Suppression (dB) ≥17(0°), ≥16(5°), ≥16(10°)
Upper Sidelobe Suppression, Peak to 20° (dB) ≥15
Front-To-Back Ratio, 180°30° (dB) ≥25
Cross-polar Discrimination@0° (dB) ≥18
Cross-polar Discrimination over Sector (dB) ≥10
Beam Tracking Avg. (dB) 2
Maximum Power per Port (W) 300

VSWR ≤1.5:1
Isolation Intra-system (dB) ≥29
Isolation Inter-system (dB) ≥30
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Impedance (Ω) 50
Lightning Protection Direct Ground

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 43
DS-Control:2-0-1 / 1216
Outdoor Directional Dual-band Antenna
ODV-065R17E18K-G V1
 XX Pol, 65°Horizontal Beamwidth
 790-960/1710-2170MHz
 16.5/17.3dBi, E-Tilt: 0-10/0-10

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 1940x265x120 / 76.4x10.4x4.7
Shipping Dimensions, HxWxD (mm) / (in) 2285x375x250 / 90.0x14.8x9.8
Net Weight, Antenna (kg) / (Ib) 19.5 / 43.0
Net Weight, Mounting Kit (kg) / (Ib) 5.9 / 13.0
Shipping Weight (kg) / (Ib) 33.5 / 73.9
Connector Type 4 x 7/16 DIN-Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -50 to +70
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
584 / 147 / 701
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

Electrical Specifications BASTA Standard**

R1 790-960
Frequency Range (MHz)
790-896 880-960
Over All Tilts 15.9±0.6 16.5±0.4
Min Tilt 16.0 16.5
Gain (dBi)
Mid Tilt 15.9 16.5
Max Tilt 15.8 16.4
Horizontal Beamwidth (°) 68±3 65±3
Vertical Beamwidth (°) 10.5±1.2 9.7±0.6
Electrical Downtilt Deviation (°) ≤0.8 ≤0.6
1st Upper Sidelobe Suppression (dB) ≥18 ≥20
Upper Sidelobe Suppression, Peak to 20° (dB) ≥16 ≥19
Front-To-Back Ratio, 180°30° (dB) ≥27 ≥29
Cross-polar Discrimination@0° (dB) ≥20 ≥22
Cross-polar Discrimination over Sector (dB) ≥14 ≥14

B1 1710-2170
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170
Over All Tilts 17.2±0.2 17.2±0.3 17.3±0.3
Min Tilt 17.0 17.1 17.3
Gain (dBi)
Mid Tilt 17.2 17.4 17.3
Max Tilt 17.2 17.3 17.3
Horizontal Beamwidth (°) 65±3 64±3 62±3
Vertical Beamwidth (°) 6.8±0.8 6.4±0.7 6.0±0.5
Electrical Downtilt Deviation (°) ≤0.9 ≤0.7 ≤0.8
1st Upper Sidelobe Suppression (dB) ≥20 ≥19 ≥17
Upper Sidelobe Suppression, Peak to 20° (dB) ≥19 ≥19 ≥17
Front-To-Back Ratio, 180°30° (dB) ≥26 ≥27 ≥26
Cross-polar Discrimination@0° (dB) ≥22 ≥23 ≥20
Cross-polar Discrimination over Sector (dB) ≥11 ≥14 ≥14
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 44
DS-Control:2-0-1 / 1216
Outdoor Directional Dual-band Antenna
ODV-065R17E18K-G V1
 XX Pol, 65°Horizontal Beamwidth
 790-960/1710-2170MHz
 16.5/17.3dBi, E-Tilt: 0-10/0-10

Connector Position Configuration Types

265

120

Connector Labeling***
Connect Code Frequency Range Array
R1 790-960 /
B1 1710-2170 /
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
00-ZJ10(14) 1 Mounting Kit, 0-14°tilt.

Optional Products (order separately)

Model Quantity Description
RCU-003(IV) 2 Remote Control Unit
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 45
DS-Control:2-0-1 / 1216
Outdoor Directional Dual-band Antenna
ODI-065R17E18K-GQ
 XX Pol, 65°Horizontal Beamwidth
 790-960/1710-2170MHz
 16.5/17.4dBi, E-Tilt: 0-10/0-10
 Integrated RCU

Electrical Specifications
R1 790-960
Frequency Range (MHz)
790-896 880-960
Polarization ±45°
Gain (dBi) 16.0 16.5
Horizontal Beamwidth (°) 68 65
Vertical Beamwidth (°) 10.5 9.8
Electrical Downtilt (°) 0-10
1st Upper Sidelobe Suppression (dB) ≥18(0°), ≥17(5°), ≥17(10°)
Upper Sidelobe Suppression, Peak to 20° (dB) ≥16
Front-to-Back Ratio, 180°30° (dB) ≥25
Cross-polar Discrimination@0° (dB) ≥18
Cross-polar Discrimination over Sector (dB) ≥10
Beam Tracking Avg. (dB) 2
Maximum Power per Port (W) 500

B1 1710-2170
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170
Polarization ±45°
Gain (dBi) 17.1 17.2 17.4
Horizontal Beamwidth (°) 65 64 62
Vertical Beamwidth (°) 7.2 6.7 6.4
Electrical Downtilt (°) 0-10
1st Upper Sidelobe Suppression (dB) ≥18(0°), ≥17(5°), ≥16(10°)
Upper Sidelobe Suppression, Peak to 20° (dB) ≥15
Front-to-Back Ratio, 180°30° (dB) ≥25
Cross-polar Discrimination@0° (dB) ≥18
Cross-polar Discrimination over Sector (dB) ≥10
Beam Tracking Avg. (dB) 2
Maximum Power per Port (W) 300

VSWR ≤1.5:1
Isolation Intra-system (dB) ≥29
Isolation Inter-system (dB) ≥30
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Impedance (Ω) 50
Lightning Protection Direct Ground

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 46
DS-Control: 1-0-4 / 1216
Outdoor Directional Dual-band Antenna
ODI-065R17E18K-GQ
 XX Pol, 65°Horizontal Beamwidth
 790-960/1710-2170MHz
 16.5/17.4dBi, E-Tilt: 0-10/0-10
 Integrated RCU

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 1940x265x120 / 76.4x10.4x4.7
Shipping Dimensions, HxWxD (mm) / (in) 2285x375x250 / 90.0x14.8x9.8
Net Weight, Antenna (kg) / (Ib) 17.8 / 39.2
Net Weight, Mounting Kit (kg) / (Ib) 5.9 / 13.0
Shipping Weight (kg) / (Ib) 30.3 / 66.8
Connector Type 4 x 4.3-10 Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -40 to +60
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
584 / 147 / 701
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

RET Specifications
Protocol to CCU/TMA 3GPP / AISG 2.0
Input Voltage Range (V) +10 to +30 DC
Power Consumption (W) ≤2(stand by); ≤13(operating)
Connectors to CCU 8 pin connector, Male, conform to AISG 2.0
Connectors to RCU 8 pin connector, Female, conform to AISG 2.0
Dimensions, HxWxD (mm) / (in)
100x53x26 / 3.9x2.1x1.0
(excluding connector)
Weight, w/o Mounting Kit (kg) / (lb) 0.16 / 0.35

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 47
DS-Control: 1-0-4 / 1216
Outdoor Directional Dual-band Antenna
ODI-065R17E18K-GQ
 XX Pol, 65°Horizontal Beamwidth
 790-960/1710-2170MHz
 16.5/17.4dBi, E-Tilt: 0-10/0-10
 Integrated RCU

Electrical Specifications BASTA Standard**

R1 790-960
Frequency Range (MHz)
790-896 880-960
Over All Tilts 15.8±0.6 16.3±0.4
Min Tilt 16.0 16.5
Gain (dBi)
Mid Tilt 15.9 16.4
Max Tilt 15.5 16.1
Horizontal Beamwidth (°) 68±3 65±2
Vertical Beamwidth (°) 10.5±0.7 9.8±0.5
Electrical Downtilt Deviation (°) ≤0.7 ≤0.6
1st Upper Sidelobe Suppression (dB) ≥21 ≥21
Upper Sidelobe Suppression, Peak to 20° (dB) ≥21 ≥21
Front-to-Back Ratio, 180°30° (dB) ≥27 ≥28
Cross-polar Discrimination@0° (dB) ≥27 ≥27
Cross-polar Discrimination over Sector (dB) ≥13 ≥13

B1 1710-2170
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170
Over All Tilts 17.1±0.4 17.4±0.3 17.4±0.3
Min Tilt 17.1 17.2 17.4
Gain (dBi)
Mid Tilt 17.2 17.5 17.5
Max Tilt 17.1 17.5 17.5
Horizontal Beamwidth (°) 65±4 64±4 62±5
Vertical Beamwidth (°) 7.2±0.6 6.7±0.5 6.4±0.7
Electrical Downtilt Deviation (°) ≤0.6 ≤0.6 ≤0.6
1st Upper Sidelobe Suppression (dB) ≥20 ≥18 ≥18
Upper Sidelobe Suppression, Peak to 20° (dB) ≥19 ≥18 ≥17
Front-to-Back Ratio, 180°30° (dB) ≥28 ≥28 ≥27
Cross-polar Discrimination@0° (dB) ≥25 ≥24 ≥20
Cross-polar Discrimination over Sector (dB) ≥14 ≥12 ≥12
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 48
DS-Control: 1-0-4 / 1216
Outdoor Directional Dual-band Antenna
ODI-065R17E18K-GQ
 XX Pol, 65°Horizontal Beamwidth
 790-960/1710-2170MHz
 16.5/17.4dBi, E-Tilt: 0-10/0-10
 Integrated RCU

Connector Position Configuration Types

R1
265

120

B1

Connector Labeling***
Connect Code Frequency range Array
R1 790-960 /
B1 1710-2170 /
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
00-ZJ10(14) 1 Mounting Kit, 0-14°tilt.
iRCU-302 1 Integrated RET Controller

Optional Products (order separately)

Model Quantity Description
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 49
DS-Control: 1-0-4 / 1216
Outdoor Directional Dual-band Antenna
ODV-065R18EK-G
 XX Pol, 65°Horizontal Beamwidth
 790-960/1710-2170MHz
 17.0/17.5dBi, E-Tilt: 0-10/0-10

Electrical Specifications
R1 790-960
Frequency Range (MHz)
790-896 880-960
Polarization ±45°
Gain (dBi) 16.5 17.0
Horizontal Beamwidth (°) 68 65
Vertical Beamwidth (°) 8.0 7.5
Electrical Downtilt (°) 0-10
1st Upper Sidelobe Suppression (dB) ≥17(0°), ≥16(5°), ≥15(10°)
Front-To-Back Ratio, 180°30° (dB) ≥25
Cross-polar Discrimination@0° (dB) ≥18
Cross-polar Discrimination over Sector (dB) ≥10
Maximum Power per Port (W) 500

B1 1710-2170
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170
Polarization ±45°
Gain (dBi) 17.2 17.5 17.5
Horizontal Beamwidth (°) 67 64 63
Vertical Beamwidth (°) 6.6 6.2 5.8
Electrical Downtilt (°) 0-10
1st Upper Sidelobe Suppression (dB) ≥18(0°), ≥17(5°), ≥16(10°)
Front-To-Back Ratio, 180°30° (dB) ≥25
Cross-polar Discrimination@0° (dB) ≥18
Cross-polar Discrimination over Sector (dB) ≥10
Maximum Power per Port (W) 300

VSWR ≤1.5:1
Isolation Intra-system (dB) ≥28
Isolation Inter-system (dB) ≥30
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Impedance (Ω) 50
Lightning Protection Direct Ground

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 2515x265x145 / 99.0x10.4x5.7
Shipping Dimensions, HxWxD (mm) / (in) 2830x375x275 / 111.4x14.8x10.8
Net Weight, Antenna (kg) / (Ib) 28.0 / 61.7
Net Weight, Mounting Kit (kg) / (Ib) 5.9 / 13.0
Shipping Weight (kg) / (Ib) 41.8 / 92.2
Connector Type 4 x 7/16 DIN-Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -50 to +70
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
799 / 277 / 793
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 50
DS-Control:2-0-10 / 1216
Outdoor Directional Dual-band Antenna
ODV-065R18EK-G
 XX Pol, 65°Horizontal Beamwidth
 790-960/1710-2170MHz
 17.0/17.5dBi, E-Tilt: 0-10/0-10

Electrical Specifications BASTA Standard**

R1 790-960
Frequency Range (MHz)
790-896 880-960
Over All Tilts 16.3±0.5 16.8±0.5
Min Tilt 16.5 17.0
Gain (dBi)
Mid Tilt 16.4 16.9
Max Tilt 15.9 16.3
Horizontal Beamwidth (°) 68±3 65±2
Vertical Beamwidth (°) 8.0±0.6 7.5±0.4
Electrical Downtilt Deviation (°) ≤1.0 ≤1.0
1st Upper Sidelobe Suppression (dB) ≥17 ≥16
Upper Sidelobe Suppression, Peak to 20° (dB) ≥16 ≥16
Front-To-Back Ratio, 180°30° (dB) ≥28 ≥28
Cross-polar Discrimination@0° (dB) ≥22 ≥20
Cross-polar Discrimination over Sector (dB) ≥12 ≥12

B1 1710-2170
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170
Over All Tilts 17.2±0.5 17.5±0.4 17.5±0.4
Min Tilt 17.2 17.5 17.5
Gain (dBi)
Mid Tilt 17.3 17.7 17.7
Max Tilt 17.1 17.4 17.3
Horizontal Beamwidth (°) 67±5 64±4 63±3
Vertical Beamwidth (°) 6.6±0.4 6.2±0.4 5.8±0.6
Electrical Downtilt Deviation (°) ≤0.3 ≤0.3 ≤0.4
1st Upper Sidelobe Suppression (dB) ≥18 ≥19 ≥19
Upper Sidelobe Suppression, Peak to 20° (dB) ≥18 ≥15 ≥15
Front-To-Back Ratio, 180°30° (dB) ≥27 ≥28 ≥27
Cross-polar Discrimination@0° (dB) ≥20 ≥22 ≥22
Cross-polar Discrimination over Sector (dB) ≥14 ≥12 ≥11
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 51
DS-Control:2-0-10 / 1216
Outdoor Directional Dual-band Antenna
ODV-065R18EK-G
 XX Pol, 65°Horizontal Beamwidth
 790-960/1710-2170MHz
 17.0/17.5dBi, E-Tilt: 0-10/0-10

Connector Position Configuration Types

265

145

Connector Labeling***
Connect Code Frequency range Array
R1 790-960 /
B1 1710-2170 /
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
00-ZJ10(08) 1 Mounting Kit, 0-8°tilt.

Optional Products (order separately)

Model Quantity Description
RCU-003(IV) 2 Remote Control Unit
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 52
DS-Control:2-0-10 / 1216
Outdoor Directional Dual-band Antenna
ODP-065R09M12J-G(2J)
 XX Pol, 65°Horizontal Beamwidth
 694-960/1710-2690MHz
 9.8/13.1dBi, FET-Tilt: 0-0

Electrical Specifications
R1 694-960
Frequency Range (MHz)
694-824 790-894 880-960
Polarization ±45°
Gain (dBi) 9.4 9.7 9.8
Horizontal Beamwidth (°) 74 72 71
Vertical Beamwidth (°) 44.0 39.0 37.0
Fixed Electrical Downtilt (°) 0
Front-To-Back Ratio, 180°30° (dB) ≥20
Cross-polar Discrimination@0°(dB) ≥17
Maximum Power per Port (W) 150

Y1 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2390 2490-2690
Polarization ±45°
Gain (dBi) 11.7 12.2 12.4 12.7 12.8
Horizontal Beamwidth (°) 66 66 66 64 62
Vertical Beamwidth (°) 24.0 23.0 21.0 20.0 18.0
Fixed Electrical Downtilt (°) 0
Front-To-Back Ratio, 180°30° (dB) ≥22
Cross-polar Discrimination@0°(dB) ≥17
Maximum Power per Port (W) 150

VSWR ≤1.5:1
Isolation Intra-system (dB) ≥25
Isolation Inter-system (dB) ≥25
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Impedance (Ω) 50
Lightning Protection Direct Ground

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 416x320x145 / 16.4x12.6x5.7
Shipping Dimensions, HxWxD(mm) / (in) 520x435x290 / 20.5x17.1x11.4
Net Weight, Antenna (kg) / (Ib) 5.2 / 11.5
Net Weight, Mounting Kit (kg) / (Ib) 0.6 / 1.3
Shipping Weight (kg) / (Ib) 7.5 / 16.5
Connector Type 2 x 7/16 DIN-Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -50 to +70
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
214 / 60 / 214
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 53
DS-Control:2-0-1 / 1216
Outdoor Directional Dual-band Antenna
ODP-065R09M12J-G(2J)
 XX Pol, 65°Horizontal Beamwidth
 694-960/1710-2690MHz
 9.8/13.1dBi, FET-Tilt: 0-0

Electrical Specifications BASTA Standard**

R1 694-960
Frequency Range (MHz)
694-824 790-894 880-960
Gain (dBi) 9.4±0.7 9.7±0.2 9.8±0.3
Horizontal Beamwidth (°) 74±5 72±5 71±4
Vertical Beamwidth (°) 44.0±4 39.0±3 37.0±3
Front-To-Back Ratio, 180°30° (dB) ≥20 ≥22 ≥23
Cross-polar Discrimination@0°(dB) ≥20 ≥22 ≥22
Cross-polar Discrimination over Sector (dB) ≥8 ≥10 ≥6

Y1 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2390 2490-2690
Gain (dBi) 11.7±0.5 12.2±0.3 12.4±0.3 12.7±0.3 13.1±0.5
Horizontal Beamwidth (°) 66±6 66±4 66±4 64±4 62±5
Vertical Beamwidth (°) 24.0±1 23.0±2 21.0±2 20.0±3 18.0±1
Front-To-Back Ratio, 180°30° (dB) ≥22 ≥26 ≥26 ≥25 ≥23
Cross-polar Discrimination@0° (dB) ≥20 ≥19 ≥19 ≥22 ≥21
Cross-polar Discrimination over Sector (dB) ≥12 ≥13 ≥13 ≥11 ≥7
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

Connector Position

320

145

Accessories
Model Quantity Description
00-ZJ16(15) 1 Mounting Kit, 0-15°tilt.

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 54
DS-Control:2-0-1 / 1216
Outdoor Directional Dual-band Antenna
ODP-065R09M12J-G
 XX Pol, 65°Horizontal Beamwidth
 694-960/1710-2690MHz
 9.7/12.3dBi, FET: 0/0

Electrical Specifications
R1 694-960
Frequency Range (MHz)
694-824 790-894 880-960
Polarization ±45°
Gain (dBi) 8.5 9.1 9.7
Horizontal Beamwidth (°) 70 69 71
Vertical Beamwidth (°) 43.0 39.0 38.0
Fixed Electrical Downtilt (°) 0
Front-To-Back Ratio, 180°30° (dB) ≥20
Cross-polar Discrimination@0° (dB) ≥17
Maximum Power per Port (W) 500

Y1 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2390 2490-2690
Polarization ±45°
Gain (dBi) 11.6 11.9 12.0 12.7 12.3
Horizontal Beamwidth (°) 62 60 61 64 59
Vertical Beamwidth (°) 24.0 22.0 22.0 20.0 18.0
Fixed Electrical Downtilt (°) 0
Front-To-Back Ratio, 180°30° (dB) ≥22
Cross-polar Discrimination@0° (dB) ≥17
Maximum Power per Port (W) 250

VSWR ≤1.5:1
Isolation Intra-system (dB) ≥25
Isolation Inter-system (dB) ≥25
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Impedance (Ω) 50
Lightning Protection Direct Ground

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 416x320x145 / 16.4x12.6x5.7
Shipping Dimensions, HxWxD(mm) / (in) 561x430x260 / 22.1x16.9x10.2
Net Weight, Antenna (kg) / (Ib) 7.0 / 15.4
Net Weight, Mounting Kit (kg) / (Ib) 0.6 / 1.3
Shipping Weight (kg) / (Ib) 9.0 / 19.8
Connector Type 4 x 7/16 DIN-Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -50 to +70
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
117 / 34 / 144
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 55
DS-Control:0-0-5 / 1016
Outdoor Directional Dual-band Antenna
ODP-065R09M12J-G
 XX Pol, 65°Horizontal Beamwidth
 694-960/1710-2690MHz
 9.7/12.3dBi, FET: 0/0

Electrical Specifications BASTA Standard**

R1 694-960
Frequency Range (MHz)
694-824 790-894 880-960
Gain (dBi) 8.5±0.7 9.1±0.2 9.7±0.3
Horizontal Beamwidth (°) 70±4 69±2 71±4
Vertical Beamwidth (°) 43.0±4.6 39.0±3.0 38.0±2.6
Front-To-Back Ratio, 180°30° (dB) ≥20 ≥22 ≥22
Cross-polar Discrimination@0° (dB) ≥30 ≥32 ≥29
Cross-polar Discrimination over Sector (dB) ≥5 ≥8 ≥6

Y1 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2390 2490-2690
Gain (dBi) 11.6±0.3 11.9±0.2 12.0±0.6 12.7±0.3 12.3±0.8
Horizontal Beamwidth (°) 62±4 60±5 61±5 64±4 59±4
Vertical Beamwidth (°) 24.0±1.0 23.0±1.5 22.0±2.6 20.0±3 18.0±1.3
Front-To-Back Ratio, 180°30° (dB) ≥22 ≥23 ≥23 ≥25 ≥22
Cross-polar Discrimination@0° (dB) ≥21 ≥22 ≥23 ≥22 ≥17
Cross-polar Discrimination over Sector (dB) ≥8 ≥9 ≥6 ≥11 ≥5
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

Connector Position Configuration Types

320

145

Connector Labeling***
Connect Code Frequency range Array
R1 694-960 r
Y1 1710-2690 l
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
00-ZJ16(15) 1 Mounting Kit, 0-15°tilt.

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 56
DS-Control:0-0-5 / 1016
Outdoor Directional Dual-band Antenna
ODP-065R12M14J-G
 XX Pol, 65°Horizontal Beamwidth
 698-960/1710-2690MHz
 12.0/15.6dBi, FET: 0/0

Electrical Specifications
R1 698-960
Frequency Range (MHz)
698-824 790-894 880-960
Polarization ±45°
Gain (dBi) 11.4 11.8 12.0
Horizontal Beamwidth (°) 74 74 73
Vertical Beamwidth (°) 28.8 26.4 24.1
Fixed Electrical Downtilt (°) 0
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥17
Maximum Power per Port (W) 500

Y1 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2490-2690
Polarization ±45°
Gain (dBi) 14.7 15.0 15.2 15.6
Horizontal Beamwidth (°) 66 63 61 65
Vertical Beamwidth (°) 13.9 13.2 12.3 9.8
Fixed Electrical Downtilt (°) 0
1st Upper Sidelobe Suppression (dB) ≥14
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥17
Maximum Power per Port (W) 250

VSWR ≤1.5:1
Isolation Intra-system (dB) ≥25
Isolation Inter-system (dB) ≥30
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Impedance (Ω) 50
Lightning Protection Direct Ground

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 650x320x145 / 25.6x12.6x5.7
Shipping Dimensions, HxWxD(mm) / (in) 850x430x260 / 33.5x16.9x10.2
Net Weight, Antenna (kg) / (Ib) 8.8 / 19.4
Net Weight, Mounting Kit (kg) / (Ib) 2.0 / 4.4
Shipping Weight (kg) / (Ib) 13.0 / 28.7
Connector Type 4 x 7/16 DIN-Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -50 to +70
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
192 / 53 / 240
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 57
DS-Control:3-0-0 / 1216
Outdoor Directional Dual-band Antenna
ODP-065R12M14J-G
 XX Pol, 65°Horizontal Beamwidth
 698-960/1710-2690MHz
 12.0/15.6dBi, FET: 0/0

Electrical Specifications BASTA Standard**

R1 698-960
Frequency Range (MHz)
698-824 790-894 880-960
Gain (dBi) 11.4±0.3 11.8±0.4 12.0±0.3
Horizontal Beamwidth (°) 74±4 74±4 73±3
Vertical Beamwidth (°) 28.8±1.7 26.4±1.9 24.1±1.3
Front-To-Back Ratio, 180°30° (dB) ≥25 ≥26 ≥25
Cross-polar Discrimination@0° (dB) ≥23 ≥21 ≥20
Cross-polar Discrimination over Sector (dB) ≥13 ≥10 ≥7

Y1 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2490-2690
Gain (dBi) 14.7±0.5 15.0±0.2 15.2±0.5 15.6±0.4
Horizontal Beamwidth (°) 66±5 63±3 61±3 65±5
Vertical Beamwidth (°) 13.9±0.6 13.2±0.7 12.3±1.3 9.8±0.8
1st Upper Sidelobe Suppression (dB) ≥15 ≥17 ≥18 ≥16
Upper Sidelobe Suppression, Peak to 20° (dB) ≥16 ≥17 ≥17 ≥16
Front-To-Back Ratio, 180°30° (dB) ≥24 ≥24 ≥25 ≥25
Cross-polar Discrimination@0° (dB) ≥22 ≥23 ≥23 ≥20
Cross-polar Discrimination over Sector (dB) ≥11 ≥12 ≥11 ≥7
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

Connector Position Configuration Types

320

145

Connector Labeling***
Connect Code Frequency range Array
R1 698-960 r
Y1 1710-2690 l
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
SJA-B-14E(20) 1 Mounting Kit, 0-20°tilt.

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 58
DS-Control:3-0-0 / 1216
Outdoor Directional Dual-band Antenna
ODV-065R14M17J-G
 XX Pol, 65°Horizontal Beamwidth
 698-960/1710-2690MHz
 14.0/17.1dBi, E-Tilt: 0-14/0-10

Electrical Specifications
R1 698-960
Frequency Range (MHz)
698-824 790-894 880-960
Polarization ±45°
Gain (dBi) 13.2 13.6 14.0
Horizontal Beamwidth (°) 72 72 68
Vertical Beamwidth (°) 17.7 16.0 14.3
Electrical Downtilt (°) 0-14
1st Upper Sidelobe Suppression (dB) ≥17(0°), ≥16(7°), ≥15(14°)
Front-To-Back Ratio, 180°30° (dB) ≥25
Cross-polar Discrimination@0° (dB) ≥17
Maximum Power per Port (W) 500

Y1 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2490-2690
Polarization ±45°
Gain (dBi) 16.0 16.2 16.6 17.1
Horizontal Beamwidth (°) 69 62 62 61
Vertical Beamwidth (°) 10.7 10.1 9.4 7.4
Electrical Downtilt (°) 0-10
1st Upper Sidelobe Suppression (dB) ≥16(0°), ≥15(5°), ≥14(10°)
Front-To-Back Ratio, 180°30° (dB) ≥25
Cross-polar Discrimination@0° (dB) ≥17
Maximum Power per Port (W) 250

VSWR ≤1.5:1
Isolation Intra-system (dB) ≥26
Isolation Inter-system (dB) ≥30
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Impedance (Ω) 50
Lightning Protection Direct Ground

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 59
DS-Control:3-0-3 / 1216
Outdoor Directional Dual-band Antenna
ODV-065R14M17J-G
 XX Pol, 65°Horizontal Beamwidth
 698-960/1710-2690MHz
 14.0/17.1dBi, E-Tilt: 0-14/0-10

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 1280x320x145 / 50.4x12.6x5.7
Shipping Dimensions, HxWxD(mm) / (in) 1585x430x270 / 62.4x16.9x10.6
Net Weight, Antenna (kg) / (Ib) 13.5 / 29.8
Net Weight, Mounting Kit (kg) / (Ib) 5.9 / 13.0
Shipping Weight (kg) / (Ib) 23.4 / 51.6
Connector Type 4 x 7/16 DIN-Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -50 to +70
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
434 / 109 / 550
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

Electrical Specifications BASTA Standard**

R1 698-960
Frequency Range (MHz)
698-824 790-894 880-960
Over All Tilts 13.0±0.5 13.4±0.5 13.8±0.3
Min Tilt 13.2 13.6 14.0
Gain (dBi)
Mid Tilt 13.0 13.5 14.0
Max Tilt 12.8 13.2 13.5
Horizontal Beamwidth (°) 72±3 72±3 68±4
Vertical Beamwidth (°) 17.7±1.6 16.0±0.9 14.3±0.9
Electrical Downtilt Deviation (°) ≤1.0 ≤0.9 ≤0.8
1st Upper Sidelobe Suppression (dB) ≥18 ≥18 ≥18
Upper Sidelobe Suppression, Peak to 20° (dB) ≥16 ≥16 ≥16
Front-To-Back Ratio, 180°30° (dB) ≥25 ≥25 ≥25
Cross-polar Discrimination@0° (dB) ≥20 ≥21 ≥22
Cross-polar Discrimination over Sector (dB) ≥9 ≥9 ≥7

Y1 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2490-2690
Over All Tilts 15.9±0.6 16.2±0.3 16.6±0.5 17.0±0.5
Min Tilt 16.0 16.2 16.6 17.1
Gain (dBi)
Mid Tilt 16.0 16.3 16.7 17.2
Max Tilt 15.7 16.0 16.5 16.8
Horizontal Beamwidth (°) 69±6 62±4 62±3 61±4
Vertical Beamwidth (°) 10.7±0.7 10.1±0.4 9.4±1.1 7.4±0.3
Electrical Downtilt Deviation (°) ≤0.6 ≤0.6 ≤0.6 ≤0.7
1st Upper Sidelobe Suppression (dB) ≥18 ≥18 ≥16 ≥17
Upper Sidelobe Suppression, Peak to 20° (dB) ≥18 ≥18 ≥16 ≥17
Front-To-Back Ratio, 180°30° (dB) ≥25 ≥25 ≥25 ≥26
Cross-polar Discrimination@0° (dB) ≥20 ≥21 ≥22 ≥22
Cross-polar Discrimination over Sector (dB) ≥10 ≥11 ≥10 ≥6
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 60
DS-Control:3-0-3 / 1216
Outdoor Directional Dual-band Antenna
ODV-065R14M17J-G
 XX Pol, 65°Horizontal Beamwidth
 698-960/1710-2690MHz
 14.0/17.1dBi, E-Tilt: 0-14/0-10

Connector Position Configuration Types

320

145

Connector Labeling***
Connect Code Frequency range Array
R1 698-960 r
Y1 1710-2690 l
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
00-ZJ10(16) 1 Mounting Kit, 0-16°tilt.

Optional Products (order separately)

Model Quantity Description
RCU-003(IV) 2 Remote Control Unit
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 61
DS-Control:3-0-3 / 1216
Outdoor Directional Dual-band Antenna
ODV-065R15M18J-G
 XX Pol, 65°Horizontal Beamwidth
 698-960/1710-2690MHz
 14.6/17.5dBi, E-Tilt: 0-14/0-10

Electrical Specifications
R1 698-960
Frequency Range (MHz)
698-824 790-894 880-960
Polarization ±45°
Gain (dBi) 14.2 14.5 14.6
Horizontal Beamwidth (°) 68 68 67
Vertical Beamwidth (°) 15.0 13.6 12.2
Electrical Downtilt (°) 0-14
1st Upper Sidelobe Suppression (dB) ≥16(0°), ≥15(7°), ≥14(14°)
Upper Sidelobe Suppression, Peak to 20° (dB) ≥15(0°), ≥14(7°), ≥14(14°)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥17(typ.)
Maximum Power per Port (W) 500
Isolation Intra-system (dB) ≥25

Y1 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2490-2690
Polarization ±45°
Gain (dBi) 16.4 16.7 17.1 17.5
Horizontal Beamwidth (°) 64 63 63 65
Vertical Beamwidth (°) 7.5 7.1 6.6 5.0
Electrical Downtilt (°) 0-10
1st Upper Sidelobe Suppression (dB) ≥16(0°), ≥15(5°), ≥14(10°)
Upper Sidelobe Suppression, Peak to 20° (dB) ≥15(0°), ≥14(5°), ≥14(10°)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥17(typ.)
Maximum Power per Port (W) 250
Isolation Intra-system (dB) ≥28

VSWR ≤1.5:1
Isolation Inter-system (dB) ≥30
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Impedance (Ω) 50
Lightning Protection Direct Ground

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 62
DS-Control: 2-0-2 / 1116
Outdoor Directional Dual-band Antenna
ODV-065R15M18J-G
 XX Pol, 65°Horizontal Beamwidth
 698-960/1710-2690MHz
 14.6/17.5dBi, E-Tilt: 0-14/0-10

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 1610x320x145 / 63.4x12.6x5.7
Shipping Dimensions, HxWxD(mm) / (in) 1915x430x270 / 75.4x16.9x10.6
Net Weight, Antenna (kg) / (Ib) 17.5 / 38.6
Net Weight, Mounting Kit (kg) / (Ib) 5.9 / 13.0
Shipping Weight (kg) / (Ib) 29.3 / 64.6
Connector Type 4 x 7/16 DIN-Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -50 to +70
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
574 / 140 / 729
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

Electrical Specifications BASTA Standard**

R1 698-960
Frequency Range (MHz)
698-824 790-894 880-960
Over All Tilts 14.2±0.3 14.3±0.4 14.3±0.7
Min Tilt 14.2 14.5 14.6
Gain (dBi)
Mid Tilt 14.2 14.4 14.4
Max Tilt 14.0 13.9 13.6
Horizontal Beamwidth (°) 68±2 68±2 67±3
Vertical Beamwidth (°) 15.0±1.1 13.6±1.0 12.2±0.8
Electrical Downtilt Deviation (°) ≤0.7 ≤0.7 ≤0.5
1st Upper Sidelobe Suppression (dB) ≥17 ≥17 ≥17
Upper Sidelobe Suppression, Peak to 20° (dB) ≥17 ≥17 ≥17
Front-To-Back Ratio, 180°30° (dB) ≥25 ≥26 ≥25
Cross-polar Discrimination@0° (dB) ≥21 ≥19 ≥21
Cross-polar Discrimination over Sector (dB) ≥10 ≥11 ≥11

Y1 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2490-2690
Over All Tilts 16.5±0.5 16.7±0.2 17.2±0.8 17.7±0.8
Min Tilt 16.4 16.7 17.1 17.5
Gain (dBi)
Mid Tilt 16.5 16.8 17.3 17.7
Max Tilt 16.5 16.8 17.2 17.7
Horizontal Beamwidth (°) 64±6 63±4 63±3 65±6
Vertical Beamwidth (°) 7.5±0.6 7.1±0.3 6.6±0.8 5.0±0.4
Electrical Downtilt Deviation (°) ≤0.6 ≤0.5 ≤0.7 ≤0.6
1st Upper Sidelobe Suppression (dB) ≥18 ≥18 ≥18 ≥17
Upper Sidelobe Suppression, Peak to 20° (dB) ≥18 ≥18 ≥18 ≥16
Front-To-Back Ratio, 180°30° (dB) ≥24 ≥24 ≥24 ≥25
Cross-polar Discrimination@0° (dB) ≥21 ≥22 ≥22 ≥19
Cross-polar Discrimination over Sector (dB) ≥12 ≥11 ≥10 ≥10
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 63
DS-Control: 2-0-2 / 1116
Outdoor Directional Dual-band Antenna
ODV-065R15M18J-G
 XX Pol, 65°Horizontal Beamwidth
 698-960/1710-2690MHz
 14.6/17.5dBi, E-Tilt: 0-14/0-10

Connector Position Configuration Types

320

145

Connector Labeling***
Connect Code Frequency Range Array
R1 698-960 r
Y1 1710-2690 l
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
00-ZJ10(12) 1 Mounting Kit, 0-12°tilt.

Optional Products (order separately)

Model Quantity Description
RCU-003(IV) 2 Remote Control Unit
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 64
DS-Control: 2-0-2 / 1116
Outdoor Directional Dual-band Antenna
ODV-065R16M18J-G
 XX Pol, 65°Horizontal Beamwidth
 698-960/1710-2690MHz
 15.6/18.0dBi, E-Tilt: 0-10/0-10

Electrical Specifications
R1 698-960
Frequency Range (MHz)
698-824 790-894 880-960
Polarization ±45°
Gain (dBi) 15.2 15.5 15.6
Horizontal Beamwidth (°) 67 65 62
Vertical Beamwidth (°) 11.0 10.1 9.5
Electrical Downtilt (°) 0-10
1st Upper Sidelobe Suppression (dB) ≥17(0°), ≥15(5°), ≥14(10°)
Upper Sidelobe Suppression, Peak to 20° (dB) ≥16(0°), ≥15(5°), ≥15(10°)
Front-to-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥17
Maximum Power per Port (W) 500

Y1 1710-2690
Frequency Range (MHz)
1710-1990 1920-2170 2490-2690
Polarization ±45°
Gain (dBi) 16.7 17.2 18.0
Horizontal Beamwidth (°) 63 65 61
Vertical Beamwidth (°) 6.5 5.9 4.8
Electrical Downtilt (°) 0-10
1st Upper Sidelobe Suppression (dB) ≥16(0°), ≥16(5°), ≥14(10°)
Upper Sidelobe Suppression, Peak to 20° (dB) ≥15(0°), ≥15(5°), ≥14(10°)
Front-to-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥17
Maximum Power per Port (W) 250

VSWR ≤1.5:1
Isolation Intra-system (dB) ≥28
Isolation Inter-system (dB) ≥30
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Impedance (Ω) 50
Lightning Protection Direct Ground

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 65
DS-Control: 3-0-1 / 1216
Outdoor Directional Dual-band Antenna
ODV-065R16M18J-G
 XX Pol, 65°Horizontal Beamwidth
 698-960/1710-2690MHz
 15.6/18.0dBi, E-Tilt: 0-10/0-10

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 1975x320x145 / 77.8x12.6x5.7
Shipping Dimensions HxWxD (mm) / (in) 2280x430x270 / 89.8x16.9x10.6
Net Weight, Antenna (kg) / (Ib) 21.4 / 47.2
Net Weight, Mounting Kit (kg) / (Ib) 5.9 / 13.0
Shipping Weight (kg) / (Ib) 35.3 / 77.8
Connector Type 4 x 7/16 DIN-Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -50 to +70
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
740 / 172 / 945
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

Electrical Specifications BASTA Standard**

R1 698-960
Frequency Range (MHz)
698-824 790-894 880-960
Over All Tilts 14.8±0.3 15.1±0.4 15.2±0.3
Min Tilt 15.2 15.5 15.6
Gain (dBi)
Mid Tilt 15.3 15.3 15.5
Max Tilt 14.7 14.9 14.9
Horizontal Beamwidth (°) 67±3 65±3 62±2
Vertical Beamwidth (°) 11±1.2 10.1±0.4 9.5±0.7
Electrical Downtilt Deviation (°) ≤0.6 ≤0.7 ≤0.6
1st Upper Sidelobe Suppression (dB) ≥17 ≥17 ≥18
Upper Sidelobe Suppression, Peak to 20° (dB) ≥17 ≥17 ≥17
Front-to-Back Ratio, 180°30° (dB) ≥25 ≥26 ≥28
Cross-polar Discrimination@0° (dB) ≥21 ≥22 ≥22
Cross-polar Discrimination over Sector (dB) ≥9 ≥11 ≥10

Y1 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2490-2690
Over All Tilts 16.6±0.4 16.9±0.3 17.1±0.5 17.2±0.5
Min Tilt 16.7 16.8 17.2 18.0
Gain (dBi)
Mid Tilt 16.7 17.1 17.4 18.0
Max Tilt 16.5 16.7 16.8 17.3
Horizontal Beamwidth (°) 65±6 60±4 65±4 61±6
Vertical Beamwidth (°) 6.7±0.4 6.3±0.3 5.9±0.5 4.8±0.4
Electrical Downtilt Deviation (°) ≤0.5 ≤0.4 ≤0.4 ≤0.6
1st Upper Sidelobe Suppression (dB) ≥18 ≥18 ≥17 ≥17
Upper Sidelobe Suppression, Peak to 20° (dB) ≥18 ≥18 ≥17 ≥15
Front-to-Back Ratio, 180°30° (dB) ≥25 ≥25 ≥25 ≥25
Cross-polar Discrimination@0° (dB) ≥20 ≥21 ≥23 ≥23
Cross-polar Discrimination over Sector (dB) ≥10 ≥10 ≥10 ≥8
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 66
DS-Control: 3-0-1 / 1216
Outdoor Directional Dual-band Antenna
ODV-065R16M18J-G
 XX Pol, 65°Horizontal Beamwidth
 698-960/1710-2690MHz
 15.6/18.0dBi, E-Tilt: 0-10/0-10

Connector Position Configuration Types

320

145

Connector Labeling***
Connect Code Frequency range Array
R1 698-960 r
Y1 1710-2690 l
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
00-ZJ10(12) 1 Mounting Kit, 0-12°tilt.

Optional Products (order separately)

Model Quantity Description
RCU-003(IV) 2 Remote Control Unit
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 67
DS-Control: 3-0-1 / 1216
Outdoor Directional Dual-band Antenna
ODV-065R17M18J-G
 XX Pol, 65°Horizontal Beamwidth
 694-960/1710-2690MHz
 16.8/18.0dBi, E-Tilt: 0-10/0-10

Electrical Specifications
R1 694-960
Frequency Range (MHz)
694-824 790-894 880-960
Polarization ±45°
Gain (dBi) 16.0 16.5 16.8
Horizontal Beamwidth (°) 69 68 68
Vertical Beamwidth (°) 8.7 7.7 7.3
Electrical Downtilt (°) 0-10
1st Upper Sidelobe Suppression (dB) ≥17(0°), ≥16(5°), ≥15(10°)
Upper Sidelobe Suppression, Peak to 20° (dB) ≥16(0°), ≥16(5°), ≥15(10°)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥17(typ.)
Maximum Power per Port (W) 500

Y1 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Polarization ±45°
Gain (dBi) 16.8 17.0 17.5 17.6 18.0
Horizontal Beamwidth (°) 66 64 62 64 63
Vertical Beamwidth (°) 7.4 6.8 6.5 5.5 5.0
Electrical Downtilt (°) 0-10
1st Upper Sidelobe Suppression (dB) ≥16(0°), ≥15(5°), ≥14(10°)
Upper Sidelobe Suppression, Peak to 20° (dB) ≥15(0°), ≥15(5°), ≥14(10°)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥17(typ.)
Maximum Power Per Port (W) 250

VSWR ≤1.5:1
Isolation Intra-system (dB) ≥28
Isolation Inter-system (dB) ≥30
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Impedance (Ω) 50
Lightning Protection Direct Ground

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 68
DS-Control: 2-0-1 / 1216
Outdoor Directional Dual-band Antenna
ODV-065R17M18J-G
 XX Pol, 65°Horizontal Beamwidth
 694-960/1710-2690MHz
 16.8/18.0dBi, E-Tilt: 0-10/0-10

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 2680x320x145 / 105.5x12.6x5.7
Shipping Dimensions HxWxD (mm) / (in) 2995x430x270 / 117.9x16.9x10.6
Net Weight, Antenna (kg) / (Ib) 30.2 / 66.6
Net Weight, Mounting Kit (kg) / (Ib) 9.4 / 20.7
Shipping Weight (kg) / (Ib) 48.7 / 107.4
Connector Type 4 x 7/16 DIN-Female

2454
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey

1354
Operational Temperature (°C) -50 to +70
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
68
Wind Load* @150km/h
1081 / 238 / 1350
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

Electrical Specifications BASTA Standard**

R1 694-960
Frequency Range (MHz)
694-824 790-894 880-960
Over All Tilts 14.8±0.3 15.1±0.4 15.2±0.3
Min Tilt 16.0 16.5 16.8
Gain (dBi)
Mid Tilt 15.9 16.3 16.5
Max Tilt 15.5 15.9 16.0
Horizontal Beamwidth (°) 69±3 68±3 68±2
Vertical Beamwidth (°) 8.7±0.9 7.7±0.5 7.3±0.6
Electrical Downtilt Deviation (°) ≤0.6 ≤0.7 ≤0.6
1st Upper Sidelobe Suppression (dB) ≥18 ≥18 ≥17
Upper Sidelobe Suppression, Peak to 20° (dB) ≥18 ≥18 ≥17
Front-To-Back Ratio, 180°30° (dB) ≥25 ≥26 ≥28
Cross-polar Discrimination@0° (dB) ≥21 ≥23 ≥23
Cross-polar Discrimination over Sector (dB) ≥12 ≥11 ≥9

Y1 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Over All Tilts 16.7±0.4 16.9±0.4 17.3±0.3 17.5±0.5 17.9±0.5
Min Tilt 16.8 17.0 17.5 17.6 18.0
Gain (dBi)
Mid Tilt 16.7 16.8 17.3 17.5 17.8
Max Tilt 16.6 16.8 17.2 17.3 17.7
Horizontal Beamwidth (°) 66±6 64±3 62±3 64±4 63±5
Vertical Beamwidth (°) 7.4±0.4 6.8±0.3 6.5±0.5 5.5±0.5 5.0±0.4
Electrical Downtilt Deviation (°) ≤0.5 ≤0.5 ≤0.4 ≤0.4 ≤0.6
1st Upper Sidelobe Suppression (dB) ≥18 ≥18 ≥18 ≥17 ≥17
Upper Sidelobe Suppression, Peak to 20° (dB) ≥18 ≥17 ≥17 ≥16 ≥15
Front-To-Back Ratio, 180°30° (dB) ≥26 ≥26 ≥25 ≥25 ≥26
Cross-polar Discrimination@0° (dB) ≥23 ≥24 ≥21 ≥20 ≥20
Cross-polar Discrimination over Sector (dB) ≥12 ≥12 ≥11 ≥8 ≥9

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 69
DS-Control: 2-0-1 / 1216
Outdoor Directional Dual-band Antenna
ODV-065R17M18J-G
 XX Pol, 65°Horizontal Beamwidth
 694-960/1710-2690MHz
 16.8/18.0dBi, E-Tilt: 0-10/0-10

Connector Position Configuration Types

`
320

145

Connector Labeling***
Connect Code Frequency range Array
R1 694-960 r
Y1 1710-2690 l
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
00-ZJ10(08) (three mounting points) 1 Mounting Kit, 0-8°tilt.

Optional Products (order separately)

Model Quantity Description
RCU-003(IV) 2 Remote Control Unit
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 70
DS-Control: 2-0-1 / 1216
Outdoor Directional Tri-band Antenna
ODV3-065R18K-G V1
 XXX Pol, 65°Horizontal Beamwidth
 1710-2170/1710-2170/1710-2170MHz
 17.7/17.7/17.7dBi, E-Tilt: 0-10/0-10/0-10

Electrical Specifications
B1 1710-2170, B2 1710-2170, B3 1710-2170
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170
Polarization ±45°
Gain (dBi) 17.4 17.6 17.7
Horizontal Beamwidth (°) 64 64 64
Vertical Beamwidth (°) 7.5 7.0 6.5
Electrical Downtilt (°) 0-10 / 0-10 / 0-10
1st Upper Sidelobe Suppression (dB) ≥18(0°), ≥17(5°), ≥16(10°)
Upper Sidelobe Suppression, Peak to 20° (dB) ≥16
Front-To-Back Ratio, 180°30° (dB) ≥25
Cross-polar Discrimination@0° (dB) ≥18
Beam Tracking Avg. (dB) 3
VSWR ≤1.5:1
Isolation Intra-system (dB) ≥28
Isolation Inter-system (dB) ≥28
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Maximum Power per Port (W) 300
Impedance (Ω) 50
Lightning Protection Direct Ground

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 1350x380x65 / 53.1x15.0x2.6
Shipping Dimensions HxWxD(mm) / (in) 1700x490x180 / 66.9x19.3x7.1
Net Weight, Antenna (kg) / (Ib) 16.2 / 35.7
Net Weight, Mounting Kit (kg) / (Ib) 5.9 / 13.0
Shipping Weight (kg) / (Ib) 26.5 / 58.4
Connector Type 6 x 7/16 DIN-Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -50 to +70
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
760 / 53 / 827
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 71
DS-Control: 3-0-1 / 1216
Outdoor Directional Tri-band Antenna
ODV3-065R18K-G V1
 XXX Pol, 65°Horizontal Beamwidth
 1710-2170/1710-2170/1710-2170MHz
 17.7/17.7/17.7dBi, E-Tilt: 0-10/0-10/0-10

Electrical Specifications BASTA Standard**

B1 1710-2170, B2 1710-2170, B3 1710-2170
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170
Over All Tilts 17.4±0.4 17.6±0.3 17.7±0.5
Min Tilt 17.4 17.6 17.7
Gain (dBi)
Mid Tilt 17.6 17.7 17.7
Max Tilt 17.2 17.5 17.6
Horizontal Beamwidth (°) 64±4 64±4 64±3
Vertical Beamwidth (°) 7.5±0.5 7.0±0.5 6.5±0.6
Electrical Downtilt Deviation (°) ≤0.7 ≤0.6 ≤0.7
1st Upper Sidelobe Suppression (dB) ≥18 ≥17 ≥17
Upper Sidelobe Suppression, Peak to 20° (dB) ≥18 ≥17 ≥17
Front-To-Back Ratio, 180°30° (dB) ≥26 ≥26 ≥27
Cross-polar Discrimination@0° (dB) ≥24 ≥21 ≥20
Cross-polar Discrimination over Sector (dB) ≥14 ≥11 ≥12
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

Connector Position Configuration Types

380
.

65

Connector Labeling***
Connect Code Frequency Range Array
B1 1710-2170 r
B2 1710-2170 c
B3 1710-2170 l
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
00-ZJ10(16) 1 Mounting Kit, 0-16°tilt.

Optional Products (order separately)

Model Quantity Description
RCU-003(IV) 3 Remote Control Unit
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 72
DS-Control: 3-0-1 / 1216
Outdoor Directional Tri-band Antenna
ODI3-065R18K-GQ
 XXX Pol, 65°Horizontal Beamwidth
 1710-2170/1710-2170/1710-2170MHz
 17.7/17.7/17.7dBi, E-Tilt: 0-10/0-10/0-10
 Integrated RCU

Electrical Specifications

B1 1710-2170, B2 1710-2170, B3 1710-2170

Frequency Range (MHz)
1710-1880 1850-1990 1920-2170
Polarization ±45°
Gain (dBi) 17.4 17.6 17.7
Horizontal Beamwidth (°) 64 64 64
Vertical Beamwidth (°) 7.5 7.0 6.5
Electrical Downtilt (°) 0-10 / 0-10 / 0-10
1st Upper Sidelobe Suppression (dB) ≥18(0°), ≥17(5°), ≥16(10°)
Upper Sidelobe Suppression, Peak to 20°
≥16
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥25
Cross-polar Discrimination@0° (dB) ≥18
Beam Tracking Avg. (dB) 3
VSWR ≤1.5:1
Isolation Intra-system (dB) ≥28
Isolation Inter-system (dB) ≥28
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Maximum Power per Port (W) 300
Impedance (Ω) 50
Lightning Protection Direct Ground

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 1410x380x65 / 55.5x15.0x2.6
Shipping Dimensions HxWxD(mm) / (in) 1760x490x180 / 69.3x19.3x7.1
Net Weight, Antenna (kg) / (Ib) 18.0 / 39.7
Net Weight, Mounting Kit (kg) / (Ib) 5.9 / 13.0
Shipping Weight (kg) / (Ib) 30.0 / 66.1
Connector Type 6 x 4.3-10 Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -40 to +60
Operational Humidity (%) ≤95
Operational/Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
803 / 56 / 873
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

RET Specifications
Protocol to CCU/TMA 3GPP / AISG 2.0
Input Voltage Range (V) +10 to +30 DC
Power Consumption (W) ≤2(stand by); ≤13(operating)
Connectors to CCU 8 pin connector, Male
Connectors to RCU 8 pin connector, Female
Dimensions, HxWxD (mm) / (in)
100x53x26 / 3.9x2.1x1.0
(Excluding connector)
Weight, w/o Mounting Kit (kg) / (lb) 0.16 / 0.35

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 73
DS-Control: 3-0-0 / 1216
Outdoor Directional Tri-band Antenna
ODI3-065R18K-GQ
 XXX Pol, 65°Horizontal Beamwidth
 1710-2170/1710-2170/1710-2170MHz
 17.7/17.7/17.7dBi, E-Tilt: 0-10/0-10/0-10
 Integrated RCU

Electrical Specifications BASTA Standard**

B1 1710-2170, B2 1710-2170, B3 1710-2170
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170
Over All Tilts 17.3±0.4 17.4±0.4 17.5±0.3
Min Tilt 17.4 17.6 17.7
Gain (dBi)
Mid Tilt 17.5 17.6 17.7
Max Tilt 17.0 17.1 17.2
Horizontal Beamwidth (°) 64±4 64±5 64±4
Vertical Beamwidth (°) 7.5±0.3 7.0±0.3 6.5±0.5
Electrical Downtilt Deviation (°) ≤0.6 ≤0.6 ≤0.6
1st Upper Sidelobe Suppression (dB) ≥20 ≥20 ≥21
Upper Sidelobe Suppression, Peak to 20°
≥18 ≥20 ≥17
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥27 ≥28 ≥28
Cross-polar Discrimination@0° (dB) ≥26 ≥23 ≥20
Cross-polar Discrimination over Sector (dB) ≥14 ≥11 ≥11
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

Connector Position Configuration Types

380

65

Connector Labeling***
Connect Code Frequency Range Array
B1 1710-2170 r
B2 1710-2170 c
B3 1710-2170 l
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
00-ZJ10(18) 1 Mounting Kit, 0-18°tilt.
iRCU-302 1 Integrated RET Controller

Optional Products (order separately)

Model Quantity Description
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 74
DS-Control: 3-0-0 / 1216
Outdoor Directional Tri-band Antenna
ODI3-065R16J-GQ
 XXX Pol, 65°Horizontal Beamwidth
 1710-2690/1710-2690/1710-2690MHz
 16.0/16.0/16.0dBi, E-Tilt: 0-12/0-12/0-12
 Integrated RCU

Electrical Specifications
Y1 1710-2690, Y2 1710-2690, Y3 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Polarization ±45°
Gain (dBi) 15.3 15.4 15.5 15.8 16.0
Horizontal Beamwidth (°) 67 65 63 62 60
Vertical Beamwidth (°) 12.2 11.5 10.8 9.0 8.5
Electrical Downtilt (°) 0-12 / 0-12 / 0-12
1st Upper Sidelobe Suppression (dB) ≥17(0°), ≥16(6°), ≥15(12°)
Upper Sidelobe Suppression, Peak to 20°
≥15
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥25
Cross-polar Discrimination@0° (dB) ≥17
VSWR ≤1.5:1
Isolation Intra-system (dB) ≥28
Isolation Inter-system (dB) ≥28
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Maximum Power per Port (W) 250
Impedance (Ω) 50
Lightning Protection Direct Ground

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 890x380x65 / 35.0x15.0x2.6
Shipping Dimensions, HxWxD(mm) / (in) 1240x490x180 / 48.8x19.3x7.1
Net Weight, Antenna (kg) / (Ib) 12.7 / 28.0
Net Weight, Mounting Kit (kg) / (Ib) 5.9 / 13.0
Shipping Weight (kg) / (Ib) 22.5 / 49.6
Connector Type 6 x 4.3-10 Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -40 to +60
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
456 / 34 / 494
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

RET Specifications
Protocol to CCU/TMA 3GPP / AISG 2.0
Input Voltage Range (V) +10 to +30 DC
Power Consumption (W) ≤2(stand by); ≤13(operating)
Connectors to CCU 8 pin connector, Male, conform to AISG 2.0
Connectors to RCU 8 pin connector, Female, conform to AISG 2.0
Dimensions, HxWxD (mm) / (in)
100×53×26 / 3.9x2.1x1.0
(excluding connector)
Weight, w/o Mounting Kit (kg) / (lb) 0.16 / 0.35

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 75
DS-Control:0-0-1 / 1216
Outdoor Directional Tri-band Antenna
ODI3-065R16J-GQ
 XXX Pol, 65°Horizontal Beamwidth
 1710-2690/1710-2690/1710-2690MHz
 16.0/16.0/16.0dBi, E-Tilt: 0-12/0-12/0-12
 Integrated RCU

Electrical Specifications BASTA Standard**

Y1 1710-2690, Y2 1710-2690, Y3 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Over All Tilts 15.3±0.4 15.4±0.3 15.4±0.4 15.5±0.5 15.8±0.5
Min Tilt 15.3 15.4 15.5 15.8 16.0
Gain (dBi)
Mid Tilt 15.4 15.5 15.6 15.6 16.0
Max Tilt 15.1 15.2 15.2 15.0 15.5
Horizontal Beamwidth (°) 67±5 65±4 63±5 62±5 60±4
Vertical Beamwidth (°) 12.2±0.8 11.5±0.5 10.8±0.9 9.0±0.6 8.5±0.4
Electrical Downtilt Deviation (°) ≤0.9 ≤0.9 ≤0.8 ≤0.5 ≤0.4
1st Upper Sidelobe Suppression (dB) ≥20 ≥18 ≥17 ≥18 ≥20
Upper Sidelobe Suppression, Peak to 20°
(dB) ≥21 ≥18 ≥17 ≥15 ≥15
Front-To-Back Ratio, 180°30° (dB) ≥26 ≥26 ≥27 ≥27 ≥27
Cross-polar Discrimination@0° (dB) ≥20 ≥20 ≥19 ≥18 ≥17
Cross-polar Discrimination over Sector (dB) ≥16 ≥15 ≥12 ≥12 ≥11
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

Connector Position Configuration Types

380

65

Connector Labeling***
Connect Code Frequency range Array
Y1 1710-2690 r
Y2 1710-2690 c
Y3 1710-2690 l
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
00-ZJ10(30) 1 Mounting Kit, 0-30°tilt.
iRCU-302 1 Integrated RET Controller

Optional Products (order separately)

Model Quantity Description
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 76
DS-Control:0-0-1 / 1216
Outdoor Directional Tri-band Antenna
ODV3-065R18J-G V1
 XXX Pol, 65°Horizontal Beamwidth
 1710-2690/1710-2690/1710-2690MHz
 18.0/18.0/18.0dBi, E-Tilt: 0-10/0-10/0-10

Electrical Specifications
Y1 1710-2690, Y2 1710-2690, Y3 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Polarization ±45°
Gain (dBi) 17.3 17.3 17.4 17.8 18.0
Horizontal Beamwidth (°) 66 68 67 64 68
Vertical Beamwidth (°) 7.2 6.8 6.5 5.5 5.1
Electrical Downtilt (°) 0-10 / 0-10 / 0-10
1st Upper Sidelobe Suppression (dB) ≥16(0°), ≥16(5°), ≥16(10°) ≥17(0°), ≥16(5°), ≥15(10°)
Upper Sidelobe Suppression, Peak to 20° (dB) ≥14
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥17
VSWR ≤1.5:1
Isolation Intra-system (dB) ≥28
Isolation Inter-system (dB) ≥28
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Maximum Power per Port (W) 250
Impedance (Ω) 50
Lightning Protection Direct Ground

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 1460x500x140 / 57.5x19.7x5.5
Shipping Dimensions, HxWxD(mm) / (in) 1815x635x305 / 71.5x25.0x12.0
Net Weight, Antenna (kg) / (Ib) 30.5 / 67.2
Net Weight, Mounting Kit (kg) / (Ib) 6.3 / 13.9
Shipping Weight (kg) / (Ib) 43.5 / 95.9
Connector Type 6 x 7/16 DIN-Female

1120
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -50 to +70
Operational Humidity (%) ≤95 68
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
962 / 117 / 1165
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 77
DS-Control:3-0-1 / 1116
Outdoor Directional Tri-band Antenna
ODV3-065R18J-G V1
 XXX Pol, 65°Horizontal Beamwidth
 1710-2690/1710-2690/1710-2690MHz
 18.0/18.0/18.0dBi, E-Tilt: 0-10/0-10/0-10

Electrical Specifications BASTA Standard**

Y1 1710-2690, Y2 1710-2690, Y3 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Over All Tilts 17.3±0.5 17.3±0.3 17.4±0.5 17.6±0.5 17.8±0.5
Min Tilt 17.3 17.3 17.4 17.8 18.0
Gain (dBi)
Mid Tilt 17.5 17.3 17.5 17.8 18.0
Max Tilt 17.2 17.2 17.4 17.3 17.4
Horizontal Beamwidth (°) 66±4 68±3 67±4 64±5 68±4
Vertical Beamwidth (°) 7.2±0.3 6.8±0.3 6.5±0.5 5.5±0.4 5.1±0.3
Electrical Downtilt Deviation (°) ≤0.5 ≤0.4 ≤0.5 ≤0.7 ≤0.5
1st Upper Sidelobe Suppression (dB) ≥17 ≥17 ≥17 ≥18 ≥17
Upper Sidelobe Suppression, Peak to 20° (dB) ≥16 ≥16 ≥17 ≥17 ≥17
Front-To-Back Ratio, 180°30° (dB) ≥27 ≥26 ≥26 ≥26 ≥25
Cross-polar Discrimination@0° (dB) ≥21 ≥20 ≥20 ≥19 ≥17
Cross-polar Discrimination over Sector (dB) ≥14 ≥14 ≥13 ≥12 ≥12
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

Connector Position Configuration Types

500

Y3 Y2 Y1
140

Connector Labeling***
Connect Code Frequency range Array
Y1 1710-2690 r
Y2 1710-2690 c
Y3 1710-2690 l
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
00-ZJ11(16) 1 Mounting Kit, 0-16°tilt.

Optional Products (order separately)

Model Quantity Description
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 78
DS-Control:3-0-1 / 1116
Outdoor Directional Tri-band Antenna
ODI3-065R18J-GQ
 XXX Pol, 65°Horizontal Beamwidth
 1710-2690/1710-2690/1710-2690MHz
 18.5/18.5/18.5dBi, E-Tilt: 0-10/0-10/0-10
 Integrated RCU

Electrical Specifications
Y1 1710-2690, Y2 1710-2690, Y3 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Polarization ±45°
Gain (dBi) 17.5 17.8 18.0 18.2 18.5
Horizontal Beamwidth (°) 68 67 65 63 63
Vertical Beamwidth (°) 7.8 7.3 6.9 5.8 5.4
Electrical Downtilt (°) 0-10 / 0-10 / 0-10
1st Upper Sidelobe Suppression (dB) ≥17(0°), ≥16(5°), ≥15(10°)
Upper Sidelobe Suppression, Peak to 20°
≥15
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥25
Cross-polar Discrimination@0° (dB) ≥18
VSWR ≤1.5:1
Isolation Intra-system (dB) ≥28
Isolation Inter-system (dB) ≥28
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Maximum Power per Port (W) 250
Impedance (Ω) 50
Lightning Protection Direct Ground

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 1420x380x65 / 55.9x15.0x2.6
Shipping Dimensions, HxWxD(mm) / (in) 1830x490x180 / 72.0x19.3x7.1
Net Weight, Antenna (kg) / (Ib) 19.3 / 42.5
Net Weight, Mounting Kit (kg) / (Ib) 5.9 / 13.0
Shipping Weight (kg) / (Ib) 27.3 / 60.2
Connector Type 6 x 4.3-10 Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -40 to +60
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
810 / 56 / 880
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

RET Specifications
Protocol to CCU/TMA 3GPP / AISG 2.0
Input Voltage Range (V) +10 to +30 DC
Power Consumption (W) ≤2(stand by); ≤13(operating)
Connectors to CCU 8 pin connector, Male, conform to AISG 2.0
Connectors to RCU 8 pin connector, Female, conform to AISG 2.0
Dimensions, HxWxD (mm) / (in)
100x53x26 / 3.9x2.1x1.0
(excluding connector)
Weight, w/o Mounting Kit (kg) / (lb) 0.16 / 0.35

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 79
DS-Control:0-0-8 / 1216
Outdoor Directional Tri-band Antenna
ODI3-065R18J-GQ
 XXX Pol, 65°Horizontal Beamwidth
 1710-2690/1710-2690/1710-2690MHz
 18.5/18.5/18.5dBi, E-Tilt: 0-10/0-10/0-10
 Integrated RCU

Electrical Specifications BASTA Standard**

Y1 1710-2690, Y2 1710-2690, Y3 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Over All Tilts 17.3±0.4 17.6±0.4 17.8±0.5 18.0±0.7 18.3±0.5
Min Tilt 17.5 17.8 18.0 18.2 18.5
Gain (dBi)
Mid Tilt 17.4 17.8 17.9 18.1 18.3
Max Tilt 17.0 17.2 17.5 17.8 18.0
Horizontal Beamwidth (°) 68±4 67±3 65±2 63±4 63±4
Vertical Beamwidth (°) 7.8±0.5 7.3±0.5 6.9±0.7 5.8±0.5 5.4±0.3
Electrical Downtilt Deviation (°) ≤0.6 ≤0.6 ≤0.6 ≤0.8 ≤0.8
1st Upper Sidelobe Suppression (dB) ≥18 ≥19 ≥17 ≥17 ≥17
Upper Sidelobe Suppression, Peak to 20°
≥18 ≥18 ≥17 ≥17 ≥15
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥28 ≥28 ≥27 ≥26 ≥26
Cross-polar Discrimination@0° (dB) ≥29 ≥29 ≥28 ≥22 ≥21
Cross-polar Discrimination over Sector (dB) ≥16 ≥15 ≥11 ≥10 ≥8
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

Connector Position Configuration Types

380

65 Y3 Y2 Y1

Connector Labeling***
Connect Code Frequency range Array
Y1 1710-2690 r
Y2 1710-2690 c
Y3 1710-2690 l
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
00-ZJ10(18) 1 Mounting Kit, 0-18°tilt.
iRCU-302 1 Integrated RET Controller

Optional Products (order separately)

Model Quantity Description
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 80
DS-Control:0-0-8 / 1216
Outdoor Directional Tri-band Antenna
ODV-065R17E18KK-G V1
 XXX Pol, 65°Horizontal Beamwidth
 790-960/1710-2170/1710-2170MHz
 16.5/17.2/17.2dBi, E-Tilt: 0-10/0-10/0-10

Electrical Specifications
R1 790-960
Frequency Range (MHz)
790-896 880-960
Polarization ±45°
Gain (dBi) 16.0 16.5
Horizontal Beamwidth (°) 68 65
Vertical Beamwidth (°) 10.5 9.7
Electrical Downtilt (°) 0-10
1st Upper Sidelobe Suppression (dB) ≥18(0°), ≥17(7°), ≥17(14°)
Upper Sidelobe Suppression, Peak to 20°
≥16
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥25
Cross-polar Discrimination@0° (dB) ≥18
Cross-polar Discrimination over Sector (dB) ≥8
Maximum Power per Port (W) 500

B1 1710-2170, B2 1710-2170
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170
Polarization ±45°
Gain (dBi) 16.8 17.0 17.2
Horizontal Beamwidth (°) 64 63 62
Vertical Beamwidth (°) 6.9 6.5 6.1
Electrical Downtilt (°) 0-10 / 0-10
1st Upper Sidelobe Suppression (dB) ≥17(0°), ≥16(5°), ≥16(10°)
Upper Sidelobe Suppression, Peak to 20°
≥15
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥25
Cross-polar Discrimination@0° (dB) ≥18
Cross-polar Discrimination over Sector (dB) ≥8
Maximum Power per Port (W) 300

VSWR ≤1.5:1
Isolation Intra-system (dB) ≥29
Isolation Inter-system (dB) ≥30
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Impedance (Ω) 50
Lightning Protection Direct Ground

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 81
DS-Control:2-0-3 / 1216
Outdoor Directional Tri-band Antenna
ODV-065R17E18KK-G V1
 XXX Pol, 65°Horizontal Beamwidth
 790-960/1710-2170/1710-2170MHz
 16.5/17.2/17.2dBi, E-Tilt: 0-10/0-10/0-10

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 1970x320x145 / 77.6x12.6x5.7
Shipping Dimensions, HxWxD (mm) / (in) 2280x430x270 / 89.8x16.9x10.6
Net Weight, Antenna (kg) / (Ib) 24.5 / 54
Net Weight, Mounting Kit (kg) / (Ib) 5.9 / 13.0
Shipping Weight (kg) / (Ib) 37.8 / 83.3
Connector Type 6 x 7/16 DIN-Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -50 to +70
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
738 / 171 / 942
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

Electrical Specifications BASTA Standard**

R1 790-960
Frequency Range (MHz)
790-896 880-960
Over All Tilts 14.3±0.8 14.9±0.4
Min Tilt 14.6 15.2
Gain (dBi)
Mid Tilt 14.5 15.0
Max Tilt 14.0 14.5
Horizontal Beamwidth (°) 68±3 66±3
Vertical Beamwidth (°) 14.4±0.8 13.5±0.7
Electrical Downtilt Deviation (°) ≤0.6 ≤0.7
1st Upper Sidelobe Suppression (dB) ≥18 ≥18
Upper Sidelobe Suppression, Peak to 20°
≥16 ≥18
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥25 ≥27
Cross-polar Discrimination@0° (dB) ≥21 ≥24
Cross-polar Discrimination over Sector (dB) ≥10 ≥11

B1 1710-2170, B2 1710-2170
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170
Over All Tilts 17.2±0.4 17.3±0.2 17.5±0.3
Min Tilt 17.4 17.5 17.7
Gain (dBi)
Mid Tilt 17.4 17.6 17.8
Max Tilt 16.9 17.0 17.1
Horizontal Beamwidth (°) 65±3 65±4 62±4
Vertical Beamwidth (°) 7.1±0.5 6.5±0.3 6.2±0.5
Electrical Downtilt Deviation (°) ≤0.6 ≤0.6 ≤0.5
1st Upper Sidelobe Suppression (dB) ≥19 ≥19 ≥19
Upper Sidelobe Suppression, Peak to 20°
≥18 ≥19 ≥19
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥28 ≥29 ≥27
Cross-polar Discrimination@0° (dB) ≥22 ≥23 ≥20
Cross-polar Discrimination over Sector (dB) ≥12 ≥12 ≥12
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 82
DS-Control:2-0-3 / 1216
Outdoor Directional Tri-band Antenna
ODV-065R17E18KK-G V1
 XXX Pol, 65°Horizontal Beamwidth
 790-960/1710-2170/1710-2170MHz
 16.5/17.2/17.2dBi, E-Tilt: 0-10/0-10/0-10

Connector Position Configuration Types

320

145

Connector Labeling***
Connect Code Frequency Range Array
R1 790-960 l
B1 1710-2170 r
B1 1710-2170 l
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
00-ZJ10(13) 1 Mounting Kit, 0-13°tilt.

Optional Products (order separately)

Model Quantity Description
RCU-003(IV) 2 Remote Control Unit
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 83
DS-Control:2-0-3 / 1216
Outdoor Directional Tri-band Antenna
ODV-065R18EKK-G
 XXX Pol, 65°Horizontal Beamwidth
 790-960/1710-2170/1710-2170MHz
 17.2/17.1/17.2dBi, E-Tilt: 0-10/0-10/0-10

Electrical Specifications
R1 790-960 B1 1710-2170
Frequency Range (MHz)
790-896 880-960 1710-1880 1850-1990 1920-2170
Polarization ±45°
Gain (dBi) 16.8 17.2 16.7 17.0 17.1
Horizontal Beamwidth (°) 68 65 66 63 62
Vertical Beamwidth (°) 8.0 7.0 6.7 6.3 6.0
Electrical Downtilt (°) 0-10 0-10
1st Upper Sidelobe Suppression (dB) ≥17(0°), ≥16(5°), ≥15(10°) ≥18(0°), ≥16(5°), ≥15(10°)
Front-To-Back Ratio, 180°30° (dB) ≥25
Cross-polar Discrimination@0° (dB) ≥18
Cross-polar Discrimination over Sector (dB) ≥10
Maximum Power per Port (W) 500 300

B2 1710-2170
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170
Polarization ±45°
Gain (dBi) 16.9 17.1 17.2
Horizontal Beamwidth (°) 65 64 63
Vertical Beamwidth (°) 7.3 6.9 6.6
Electrical Downtilt (°) 0-10
1st Upper Sidelobe Suppression (dB) ≥17(0°), ≥15(5°), ≥15(10°)
Front-To-Back Ratio, 180°30° (dB) ≥25
Cross-polar Discrimination@0° (dB) ≥18
Cross-polar Discrimination over Sector (dB) ≥10
Maximum Power per Port (W) 300

VSWR ≤1.5:1
Isolation Intra-system (dB) ≥28
Isolation Inter-system (dB) ≥30
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Impedance (Ω) 50
Lightning Protection Direct Ground

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 2715x265x145 / 106.9x10.4x5.7
Shipping Dimensions, HxWxD (mm) / (in) 3055x375x275 / 120.3x14.8x10.8
Net Weight, Antenna (kg) / (Ib) 33.0 / 72.8
Net Weight, Mounting Kit (kg) / (Ib) 9.0 / 19.8
Shipping Weight (kg) / (Ib) 48.0 / 105.8
Connector Type 6 x 7/16 DIN-Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -50 to +70
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
878 / 301 / 868
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 84
DS-Control:2-0-5 / 1116
Outdoor Directional Tri-band Antenna
ODV-065R18EKK-G
 XXX Pol, 65°Horizontal Beamwidth
 790-960/1710-2170/1710-2170MHz
 17.2/17.1/17.2dBi, E-Tilt: 0-10/0-10/0-10

Electrical Specifications BASTA Standard**

R1 790-960
Frequency Range (MHz)
790-896 880-960
Over All Tilts 16.5±0.5 17.0±0.5
Min Tilt 16.8 17.2
Gain (dBi)
Mid Tilt 16.8 17.3
Max Tilt 16.0 16.5
Horizontal Beamwidth (°) 68±4 65±3
Vertical Beamwidth (°) 8.0±0.7 7.0±0.6
Electrical Downtilt Deviation (°) ≤1.0 ≤1.0
1st Upper Sidelobe Suppression (dB) ≥17 ≥17
Upper Sidelobe Suppression, Peak to 20° (dB) ≥17 ≥17
Front-To-Back Ratio, 180°30° (dB) ≥25 ≥26
Cross-polar Discrimination@0° (dB) ≥23 ≥21
Cross-polar Discrimination over Sector (dB) ≥13 ≥10

B1 1710-2170
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170
Over All Tilts 16.7±0.5 17.0±0.3 17.0±0.4
Min Tilt 16.7 17.0 17.1
Gain (dBi)
Mid Tilt 16.8 17.2 17.0
Max Tilt 16.6 16.9 16.8
Horizontal Beamwidth (°) 66±3 63±3 62±3
Vertical Beamwidth (°) 6.7±0.4 6.3±0.4 6.0±0.5
Electrical Downtilt Deviation (°) ≤0.6 ≤0.5 ≤0.5
1st Upper Sidelobe Suppression (dB) ≥17 ≥18 ≥18
Upper Sidelobe Suppression, Peak to 20° (dB) ≥17 ≥17 ≥17
Front-To-Back Ratio, 180°30° (dB) ≥27 ≥28 ≥28
Cross-polar Discrimination@ 0°(dB) ≥21 ≥22 ≥21
Cross-polar Discrimination over Sector (dB) ≥14 ≥15 ≥11

B2 1710-2170
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170
Over All Tilts 16.8±0.5 16.9±0.5 16.9±0.5
Min Tilt 16.9 17.1 17.2
Gain (dBi)
Mid Tilt 17.0 17.1 17.2
Max Tilt 16.4 16.4 16.4
Horizontal Beamwidth (°) 65±3 64±3 63±3
Vertical Beamwidth (°) 7.3±0.5 6.9±0.3 6.6±0.5
Electrical Downtilt Deviation (°) ≤0.4 ≤0.5 ≤0.4
1st Upper Sidelobe Suppression (dB) ≥16 ≥16 ≥17
Upper Sidelobe Suppression, Peak to 20° (dB) ≥15 ≥16 ≥14
Front-To-Back Ratio, 180°30° (dB) ≥26 ≥28 ≥27
Cross-polar Discrimination@0° (dB) ≥23 ≥22 ≥20
Cross-polar Discrimination over Sector (dB) ≥15 ≥16 ≥14
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 85
DS-Control:2-0-5 / 1116
Outdoor Directional Tri-band Antenna
ODV-065R18EKK-G
 XXX Pol, 65°Horizontal Beamwidth
 790-960/1710-2170/1710-2170MHz
 17.2/17.1/17.2dBi, E-Tilt: 0-10/0-10/0-10

Connector Position Configuration Types

265

145

Connector Labeling***
Connect Code Frequency range Array
R1 790-960 /
B1 1710-2170 t
B2 1710-2170 b
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
SJA-B-12R(08) (three mounting points) 1 Mounting Kit, 0-8°tilt.

Optional Products (order separately)

Model Quantity Description
RCU-003(IV) 3 Remote Control Unit
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 86
DS-Control:2-0-5 / 1116
Outdoor Directional Tri-band Antenna
ODP-065R12M14JJ-G
 XXX Pol, 65°Horizontal Beamwidth
 698-960/1710-2690/1710-2690MHz
 12.0/15.2/15.2dBi, FET: 0/0/0

Electrical Specifications
R1 698-960
Frequency Range (MHz)
698-824 790-894 880-960
Polarization ±45°
Gain (dBi) 11.8 12.0 12.0
Horizontal Beamwidth (°) 68 69 71
Vertical Beamwidth (°) 28.5 26.5 23.5
Fixed Electrical Downtilt (°) 0
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥17
Maximum Power per Port (W) 500

Y1 1710-2690, Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2490-2690
Polarization ±45°
Gain (dBi) 14.2 14.8 15.0 15.2
Horizontal Beamwidth (°) 64 63 62 62
Vertical Beamwidth (°) 13.8 12.8 12.2 9.5
Fixed Electrical Downtilt (°) 0/0
1st Upper Sidelobe Suppression (dB) ≥15
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥17
Maximum Power per Port (W) 250

VSWR ≤1.5:1
Isolation Intra-system (dB) ≥25
Isolation Inter-system (dB) ≥30
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Impedance (Ω) 50
Lightning Protection Direct Ground

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 650x380x138 / 25.6x15.0x5.4
Shipping Dimensions, HxWxD(mm) / (in) 905x490x270 / 35.6x19.3x10.6
Net Weight, Antenna (kg) / (Ib) 10.4 / 22.9
Net Weight, Mounting Kit (kg) / (Ib) 2.8 / 6.2
Shipping Weight (kg) / (Ib) 17.0 / 37.5
Connector Type 6 x 7/16 DIN-Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -50 to +70
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
258 / 51 / 306
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 87
DS-Control: 3-0-0 / 1116
Outdoor Directional Tri-band Antenna
ODP-065R12M14JJ-G
 XXX Pol, 65°Horizontal Beamwidth
 698-960/1710-2690/1710-2690MHz
 12.0/15.2/15.2dBi, FET: 0/0/0

Electrical Specifications BASTA Standard**

R1 698-960
Frequency Range (MHz)
698-824 790-894 880-960
Gain (dBi) 11.8±0.4 12.0±0.3 12.0±0.4
Horizontal Beamwidth (°) 68±2 69±3 71±4
Vertical Beamwidth (°) 28.5±0.9 26.5±2.3 23.5±1.0
Front-To-Back Ratio, 180°30° (dB) ≥25 ≥25 ≥25
Cross-polar Discrimination@0° (dB) ≥21 ≥21 ≥20
Cross-polar Discrimination over Sector (dB) ≥13 ≥12 ≥12

Y1 1710-2690, Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2490-2690
Gain (dBi) 14.2±0.3 14.8±0.4 15.0±0.3 15.2±0.5
Horizontal Beamwidth (°) 64±6 63±4 62±2 62±4
Vertical Beamwidth (°) 13.8±0.6 12.8±0.9 12.2±0.7 9.5±0.6
1st Upper Sidelobe Suppression (dB) ≥18 ≥17 ≥17 ≥15
Upper Sidelobe Suppression, Peak to 20°
≥18 ≥17 ≥17 ≥13
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥25 ≥26 ≥24 ≥24
Cross-polar Discrimination@0° (dB) ≥21 ≥22 ≥21 ≥20
Cross-polar Discrimination over Sector (dB) ≥10 ≥11 ≥9 ≥6
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

Connector Position Configuration Types

380

138

Connector Labeling***
Connect Code Frequency Range Array
R1 698-960 c
Y1 1710-2690 r
Y2 1710-2690 l
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
00-ZJ15A(32) 1 Mounting Kit, 0-32°tilt.

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 88
DS-Control: 3-0-0 / 1116
Outdoor Directional Tri-band Antenna
ODV-065R14M17JJ-G
 XXX Pol, 65°Horizontal Beamwidth
 698-960/1710-2690/1710-2690MHz
 14.2/17.3/17.3dBi, E-Tilt: 0-14/0-10/0-10

Electrical Specifications
R1 698-960
Frequency Range (MHz)
698-824 790-894 880-960
Polarization ±45°
Gain (dBi) 13.6 14.0 14.2
Horizontal Beamwidth (°) 68 66 66
Vertical Beamwidth (°) 17.4 16.2 14.8
Electrical Downtilt (°) 0-14
1st Upper Sidelobe Suppression (dB) ≥17(0°), ≥16(7°), ≥15(14°)
Upper Sidelobe Suppression, Peak to 20°
≥16(0°), ≥15(7°), ≥15(14°)
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥17
Isolation Intra-system (dB) ≥26
Maximum Power per Port (W) 500

Y1 1710-2690, Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2490-2690
Polarization ±45°
Gain (dBi) 16.0 16.2 16.9 17.3
Horizontal Beamwidth (°) 67 62 61 63
Vertical Beamwidth (°) 9.8 9.2 8.6 6.6
Electrical Downtilt (°) 0-10 / 0-10
1st Upper Sidelobe Suppression (dB) ≥17(0°), ≥16(5°), ≥15(10°)
Upper Sidelobe Suppression, Peak to 20°
≥15(0°), ≥15(5°), ≥14(10°)
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥17
Isolation Intra-system (dB) ≥27
Maximum Power per Port (W) 250

VSWR ≤1.5:1
Isolation Inter-system (dB) ≥30
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Impedance (Ω) 50
Lightning Protection Direct Ground

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 89
DS-Control:3-0-2 / 1216
Outdoor Directional Tri-band Antenna
ODV-065R14M17JJ-G
 XXX Pol, 65°Horizontal Beamwidth
 698-960/1710-2690/1710-2690MHz
 14.2/17.3/17.3dBi, E-Tilt: 0-14/0-10/0-10

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 1270x380x138 / 50.0x15.0x5.4
Shipping Dimensions, HxWxD(mm) / (in) 1585x490x270 / 62.4x19.3x10.6
Net Weight, Antenna (kg) / (Ib) 18.5 / 40.8
Net Weight, Mounting Kit (kg) / (Ib) 5.9 / 13.0
Shipping Weight (kg) / (Ib) 30.3 / 66.8
Connector Type 6 x 7/16 DIN-Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -50 to +70
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
563 / 105 / 673
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

Electrical Specifications BASTA Standard**

R1 698-960
Frequency Range (MHz)
698-824 790-894 880-960
Over All Tilts 13.6±0.3 14.0±0.3 14.2±0.3
Min Tilt 13.6 14.0 14.2
Gain (dBi)
Mid Tilt 13.6 13.9 14.2
Max Tilt 13.5 13.9 13.9
Horizontal Beamwidth (°) 68±2 66±2 66±3
Vertical Beamwidth (°) 17.4±1.3 16.2±0.9 14.8±0.9
Electrical Downtilt Deviation (°) ≤0.7 ≤1.0 ≤0.9
1st Upper Sidelobe Suppression (dB) ≥18 ≥18 ≥18
Upper Sidelobe Suppression, Peak to 20°
≥18 ≥18 ≥18
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥25 ≥26 ≥26
Cross-polar Discrimination@0° (dB) ≥20 ≥22 ≥23
Cross-polar Discrimination over Sector (dB) ≥11 ≥10 ≥9

Y1 1710-2690, Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2490-2690
Over All Tilts 15.9±0.4 16.2±0.4 16.6±0.5 17.0±0.5
Min Tilt 16.0 16.2 16.9 17.3
Gain (dBi)
Mid Tilt 16.0 16.0 16.6 17.0
Max Tilt 15.6 16.0 16.4 16.8
Horizontal Beamwidth (°) 67±5 62±4 61±3 63±4
Vertical Beamwidth (°) 9.8±0.6 9.2±0.4 8.6±0.9 6.6±0.5
Electrical Downtilt Deviation (°) ≤0.8 ≤0.9 ≤0.9 ≤1.0
1st Upper Sidelobe Suppression (dB) ≥18 ≥18 ≥18 ≥18
Upper Sidelobe Suppression, Peak to 20°
≥18 ≥18 ≥18 ≥15
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥25 ≥25 ≥25 ≥25
Cross-polar Discrimination@0° (dB) ≥21 ≥23 ≥23 ≥23
Cross-polar Discrimination over Sector (dB) ≥10 ≥11 ≥10 ≥7
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 90
DS-Control:3-0-2 / 1216
Outdoor Directional Tri-band Antenna
ODV-065R14M17JJ-G
 XXX Pol, 65°Horizontal Beamwidth
 698-960/1710-2690/1710-2690MHz
 14.2/17.3/17.3dBi, E-Tilt: 0-14/0-10/0-10

Connector Position Configuration Types

320

138

Connector Labeling***
Connect Code Frequency range Array
R1 698-960 c
Y1 1710-2690 r
Y2 1710-2690 l
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
00-ZJ10(16) 1 Mounting Kit, 0-16°tilt.

Optional Products (order separately)

Model Quantity Description
RCU-003(IV) 3 Remote Control Unit
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 91
DS-Control:3-0-2 / 1216
Outdoor Directional Tri-band Antenna
ODV-065R15MJJ
 XXX Pol, 65°Horizontal Beamwidth
 694-960/1710-2690/1710-2690MHz
 14.4/14.5/15.0dBi, E-Tilt: 0-14/0-12/0-12

Electrical Specifications
R1 684-960
Frequency Range (MHz)
694-824 790-894 880-960
Polarization ±45°
Gain (dBi) 13.9 14.2 14.4
Horizontal Beamwidth (°) 70 68 67
Vertical Beamwidth (°) 16.2 14.5 13.1
Electrical Downtilt (°) 0-14
1st Upper Sidelobe Suppression (dB) ≥17(0°), ≥16(7°), ≥15(14°)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥17(typ.)
Maximum Power per Port (W) 500

Y1 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Polarization ±45°
Gain (dBi) 13.9 14.1 14.2 14.4 14.5
Horizontal Beamwidth (°) 65 63 64 68 65
Vertical Beamwidth (°) 16.4 15.3 14.9 12.4 11.5
Electrical Downtilt (°) 0-12
1st Upper Sidelobe Suppression (dB) ≥16(0°), ≥15(6°), ≥14(12°)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥17(typ.)
Maximum Power per Port (W) 250

Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Polarization ±45°
Gain (dBi) 14.3 14.6 14.5 14.9 15.0
Horizontal Beamwidth (°) 64 62 63 69 65
Vertical Beamwidth (°) 16.2 15.5 14.7 12.7 12.0
Electrical Downtilt (°) 0-12
1st Upper Sidelobe Suppression (dB) ≥16(0°), ≥15(6°), ≥14(12°)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥17(typ.)
Maximum Power per Port (W) 250

VSWR ≤1.5:1
Isolation Intra-system (dB) ≥25
Isolation Inter-system (dB) ≥30
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Impedance (Ω) 50
Lightning Protection Direct Ground

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 92
DS-Control:2-0-0 / 1216
Outdoor Directional Tri-band Antenna
ODV-065R15MJJ
 XXX Pol, 65°Horizontal Beamwidth
 694-960/1710-2690/1710-2690MHz
 14.4/14.5/15.0dBi, E-Tilt: 0-14/0-12/0-12

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 1400x320x145 / 55.1x12.6x5.7
Shipping Dimensions, HxWxD (mm) / (in) 1700x430x270/ 66.9x16.9x10.6
Net Weight, Antenna (kg) / (Ib) 15.7 / 34.6
Net Weight, Mounting Kit (kg) / (Ib) 5.9 / 13.0
Shipping Weight (kg) / (Ib) 25.8 / 56.9
Connector Type 6 x 7/16 DIN-Female
Connector Location Bottom
Radome Material and Color UV Resistant PVC, Light Grey
Operational Temperature (°C) -40 to +60
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
485 / 121 / 614
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 93
DS-Control:2-0-0 / 1216
Outdoor Directional Tri-band Antenna
ODV-065R15MJJ
 XXX Pol, 65°Horizontal Beamwidth
 694-960/1710-2690/1710-2690MHz
 14.4/14.5/15.0dBi, E-Tilt: 0-14/0-12/0-12

Electrical Specifications BASTA Standard**

R1 684-960
Frequency Range (MHz)
694-824 790-894 880-960
Over All Tilts 13.8±0.5 14.1±0.4 14.2±0.6
Min Tilt 13.9 14.2 14.4
Gain (dBi)
Mid Tilt 13.8 14.1 14.3
Max Tilt 13.7 13.9 14.0
Horizontal Beamwidth (°) 70±5 68±3 67±6
Vertical Beamwidth (°) 16.2±2.0 14.5±1.5 13.1±1.5
Electrical Downtilt Deviation (°) ≤1.0 ≤1.0 ≤1.0
1st Upper Sidelobe Suppression (dB) ≥17 ≥19 ≥18
Upper Sidelobe Suppression, Peak to 20°
≥22 ≥20 ≥20
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥25 ≥25 ≥26
Cross-polar Discrimination@0° (dB) ≥25 ≥23 ≥21
Cross-polar Discrimination over Sector (dB) ≥10 ≥10 ≥13

Y1 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Over All Tilts 13.9±0.5 14.1±0.3 14.1±0.6 14.0±0.5 14.2±0.8
Min Tilt 13.9 14.1 14.2 14.4 14.5
Gain (dBi)
Mid Tilt 14.0 14.2 14.2 14.0 14.3
Max Tilt 13.7 14.0 14.0 13.7 14.0
Horizontal Beamwidth (°) 65±5 63±3 64±5 68±6 65±5
Vertical Beamwidth (°) 16.4±1.0 15.3±1.5 14.9±1.3 12.4±2.0 11.5±1.7
Electrical Downtilt Deviation (°) ≤1.0 ≤0.7 ≤0.6 ≤1.0 ≤0.7
1st Upper Sidelobe Suppression (dB) ≥17 ≥16 ≥16 ≥17 ≥18
Upper Sidelobe Suppression, Peak to 20°
≥17 ≥16 ≥16 ≥17 ≥18
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥26 ≥27 ≥27 ≥27 ≥27
Cross-polar Discrimination@0° (dB) ≥28 ≥25 ≥26 ≥21 ≥20
Cross-polar Discrimination over Sector (dB) ≥10 ≥9 ≥7 ≥10 ≥8

Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Over All Tilts 14.2±0.4 14.5±0.4 14.5±0.5 14.5±0.4 14.8±0.7
Min Tilt 14.3 14.6 14.5 14.9 15.0
Gain (dBi)
Mid Tilt 14.3 14.5 14.6 14.5 14.9
Max Tilt 14.1 14.4 14.4 14.2 14.6
Horizontal Beamwidth (°) 64±7 62±5 63±5 69±6 65±7
Vertical Beamwidth (°) 16.2±1.5. 15.5±1.7 14.7±1.7 12.7±1.5 12.0±1.2
Electrical Downtilt Deviation (°) ≤0.9 ≤1.0 ≤1.0 ≤1.0 ≤1.0
1st Upper Sidelobe Suppression (dB) ≥18 ≥17 ≥18 ≥18 ≥17
Upper Sidelobe Suppression, Peak to 20°
≥18 ≥17 ≥18 ≥17 ≥17
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥26 ≥25 ≥26 ≥24 ≥25
Cross-polar Discrimination@0° (dB) ≥27 ≥25 ≥21 ≥20 ≥20
Cross-polar Discrimination over Sector (dB) ≥12 ≥10 ≥9 ≥10 ≥11
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 94
DS-Control:2-0-0 / 1216
Outdoor Directional Tri-band Antenna
ODV-065R15MJJ
 XXX Pol, 65°Horizontal Beamwidth
 694-960/1710-2690/1710-2690MHz
 14.4/14.5/15.0dBi, E-Tilt: 0-14/0-12/0-12

Connector Position Configuration Types

320

145

Connector Labeling***
Connect Code Frequency range Array
R1 694-960 r
Y1 1710-2690 t
Y2 1710-2690 b
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
00-ZJ10(18) 1 Mounting Kit, 0-18°tilt.

Optional Products (order separately)

Model Quantity Description
RCU-003(IV) 3 Remote Control Unit
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 95
DS-Control:2-0-0 / 1216
Outdoor Directional Tri-band Antenna
ODV-065R15M18JJ-G
 XXX Pol, 65°Horizontal Beamwidth
 698-960/1710-2690/1710-2690MHz
 14.7/18.0/18.0dBi, E-Tilt: 0-14/0-10/0-10

Electrical Specifications
R1 698-960
Frequency Range (MHz)
698-824 790-894 880-960
Polarization ±45°
Gain (dBi) 14.0 14.5 14.7
Horizontal Beamwidth (°) 69 71 67
Vertical Beamwidth (°) 15.0 13.7 12.4
Electrical Downtilt (°) 0-14
1st Upper Sidelobe Suppression (dB) ≥16(0°), ≥15(7°), ≥14(14°)
Upper Sidelobe Suppression, Peak to 20°
≥16(0°), ≥16(7°), ≥15(14°)
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥17
Maximum Power per Port (W) 500
Isolation Intra-system (dB) ≥25

Y1 1710-2690, Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2490-2690
Polarization ±45°
Gain (dBi) 16.8 17.2 17.4 18.0
Horizontal Beamwidth (°) 65 64 63 64
Vertical Beamwidth (°) 6.6 6.2 5.9 4.6
Electrical Downtilt (°) 0-10 / 0-10
1st Upper Sidelobe Suppression (dB) ≥16(0°), ≥15(5°), ≥14(10°)
Upper Sidelobe Suppression, Peak to 20°
≥15(0°), ≥14(5°), ≥14(10°)
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥17
Maximum Power per Port (W) 250
Isolation Intra-system (dB) ≥28

VSWR ≤1.5:1
Isolation Inter-system (dB) ≥30
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Impedance (Ω) 50
Lightning Protection Direct Ground

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 96
DS-Control: 3-0-6 / 1116
Outdoor Directional Tri-band Antenna
ODV-065R15M18JJ-G
 XXX Pol, 65°Horizontal Beamwidth
 698-960/1710-2690/1710-2690MHz
 14.7/18.0/18.0dBi, E-Tilt: 0-14/0-10/0-10

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 1500x380x138 / 59.1x15.0x5.4
Shipping Dimensions HxWxD(mm) / (in) 1815x490x270 / 71.5x19.3x10.6
Net Weight, Antenna (kg) / (Ib) 23.0 / 50.7
Net Weight, Mounting Kit (kg) / (Ib) 5.9 / 13.0
Shipping Weight (kg) / (Ib) 35.9 / 79.1
Connector Type 6 x 7/16 DIN-Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -50 to +70
Operational Humidity (%) ≤95
Operational/Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
694 / 126 / 824
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

Electrical Specifications BASTA Standard**

R1 698-960
Frequency Range (MHz)
698-824 790-894 880-960
Over All Tilts 13.9±0.3 14.2±0.5 14.4±0.7
Min Tilt 14.0 14.5 14.7
Gain (dBi)
Mid Tilt 14.0 14.3 14.5
Max Tilt 13.7 13.8 13.8
Horizontal Beamwidth (°) 69±3 71±3 67±4
Vertical Beamwidth (°) 15.0±1.1 13.7±1.0 12.4±0.9
Electrical Downtilt Deviation (°) ≤1.0 ≤0.9 ≤0.6
1st Upper Sidelobe Suppression (dB) ≥18 ≥17 ≥18
Upper Sidelobe Suppression, Peak to 20°
≥18 ≥17 ≥18
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥25 ≥25 ≥25
Cross-polar Discrimination@0° (dB) ≥21 ≥20 ≥24
Cross-polar Discrimination over Sector (dB) ≥12 ≥12 ≥10

Y1 1710-2690, Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2490-2690
Over All Tilts 16.8±0.8 17.3±0.3 17.4±0.8 17.9±0.6
Min Tilt 16.8 17.2 17.4 18.0
Gain (dBi)
Mid Tilt 17.0 17.4 17.5 18.0
Max Tilt 16.5 17.2 17.3 17.5
Horizontal Beamwidth (°) 65±6 64±4 63±3 64±4
Vertical Beamwidth (°) 6.6±0.4 6.2±0.3 5.9±0.4 4.6±0.4
Electrical Downtilt Deviation (°) ≤0.5 ≤0.4 ≤0.5 ≤0.7
1st Upper Sidelobe Suppression (dB) ≥17 ≥18 ≥18 ≥18
Upper Sidelobe Suppression, Peak to 20°
≥17 ≥18 ≥18 ≥15
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥25 ≥27 ≥27 ≥26
Cross-polar Discrimination@0° (dB) ≥20 ≥23 ≥23 ≥24
Cross-polar Discrimination over Sector (dB) ≥10 ≥9 ≥9 ≥6
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 97
DS-Control: 3-0-6 / 1116
Outdoor Directional Tri-band Antenna
ODV-065R15M18JJ-G
 XXX Pol, 65°Horizontal Beamwidth
 698-960/1710-2690/1710-2690MHz
 14.7/18.0/18.0dBi, E-Tilt: 0-14/0-10/0-10

Connector Position Configuration Types

380

138

Connector Labeling***
Connect Code Frequency Range Array
R1 698-960 c
Y1 1710-2690 r
Y2 1710-2690 l
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
00-ZJ10(12) 1 Mounting Kit, 0-12°tilt.

Optional Products (order separately)

Model Quantity Description
RCU-003(IV) 3 Remote Control Unit
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 98
DS-Control: 3-0-6 / 1116
Outdoor Directional Tri-band Antenna
ODI-065R15M18JJ-G
 XXX Pol, 65°Horizontal Beamwidth
 694-960/1710-2690/1710-2690MHz
 14.8/18.0/18.0dBi, E-Tilt: 0-14/0-10/0-10
 Integrated RCU

Electrical Specifications
R1 694-960
Frequency Range (MHz)
694-824 790-894 880-960
Polarization ±45°
Gain (dBi) 14.2 14.6 14.8
Horizontal Beamwidth (°) 67 65 66
Vertical Beamwidth (°) 16.1 14.7 13.8
Electrical Downtilt (°) 0-14
1st Upper Sidelobe Suppression (dB) ≥16(0°), ≥15(7°), ≥15(14°)
Upper Sidelobe Suppression, Peak to 20° (dB) ≥16(0°), ≥15(7°), ≥14(14°)
Front-to-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥18(typ.)
Maximum Power per Port (W) 500

Y1 1710-2690, Y2 1710-2690
Frequency Range (MHz)
1710-1800 1850-1990 1920-2170 2300-2500 2490-2690
Polarization ±45°
Gain (dBi) 16.6 17.2 17.4 17.7 18.0
Horizontal Beamwidth (°) 65 63 63 63 64
Vertical Beamwidth (°) 7.6 7.1 6.6 5.5 4.9
Electrical Downtilt (°) 0-10 / 0-10
1st Upper Sidelobe Suppression (dB) ≥17(0°), ≥16(5°), ≥14(10°)
Upper Sidelobe Suppression, Peak to 20° (dB) ≥15(0°), ≥15(5°), ≥14(10°)
Front-to-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥20(typ.)
Maximum Power per Port (W) 250

VSWR ≤1.5:1
Isolation Intra-system (dB) ≥28
Isolation Inter-system (dB) ≥30
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Impedance (Ω) 50
Lightning Protection Direct Ground

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 99
DS-Control: 2-0-3 / 1216
Outdoor Directional Tri-band Antenna
ODI-065R15M18JJ-G
 XXX Pol, 65°Horizontal Beamwidth
 694-960/1710-2690/1710-2690MHz
 14.8/18.0/18.0dBi, E-Tilt: 0-14/0-10/0-10
 Integrated RCU

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 1400x380x138 / 55.1x15.0x5.4
Shipping Dimensions, HxWxD (mm) / (in) 1700x490x270 / 66.9x19.3x10.6
Net Weight, Antenna (kg) / (Ib) 20.6 / 45.4
Net Weight, Mounting Kit (kg) / (Ib) 5.9 / 13.0
Shipping Weight (kg) / (Ib) 32.8 / 72.3
Connector Type 6 x 7/16 DIN-Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -40 to +60
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
636 / 117 / 758
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

RET Specifications
Protocol to CCU/TMA 3GPP / AISG 2.0
Input Voltage Range (V) +10 to +30 DC
Power Consumption (W) ≤2(stand by); ≤13(operating)
Connectors to CCU 8 pin connector, Male, conform to AISG 2.0
Connectors to RCU 8 pin connector, Female, conform to AISG 2.0
Dimensions, HxWxD (mm) / (in)
100x53x26 / 3.9x2.1x1.0
(excluding connector)
Weight, w/o Mounting Kit (kg) / (lb) 0.16 / 0.35

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 100
DS-Control: 2-0-3 / 1216
Outdoor Directional Tri-band Antenna
ODI-065R15M18JJ-G
 XXX Pol, 65°Horizontal Beamwidth
 694-960/1710-2690/1710-2690MHz
 14.8/18.0/18.0dBi, E-Tilt: 0-14/0-10/0-10
 Integrated RCU

Electrical Specifications BASTA Standard**

R1 694-960
Frequency Range (MHz)
694-824 790-894 880-960
Over All Tilts 14.0±0.4 14.2±0.4 14.2±0.7
Min Tilt 14.2 14.6 14.8
Gain (dBi)
Mid Tilt 14.2 14.4 14.4
Max Tilt 13.9 13.9 13.9
Horizontal Beamwidth (°) 67±4 65±2 66±5
Vertical Beamwidth (°) 16.1±1.1 14.7±0.9 13.8±0.9
Electrical Downtilt Deviation (°) ≤0.5 ≤0.4 ≤0.5
1st Upper Sidelobe Suppression (dB) ≥16 ≥15 ≥16
Upper Sidelobe Suppression, Peak to 20° (dB) ≥16 ≥16 ≥16
Front-to-Back Ratio, 180°30° (dB) ≥25 ≥25 ≥24
Cross-polar Discrimination@0° (dB) ≥21 ≥20 ≥22
Cross-polar Discrimination over Sector (dB) ≥9 ≥8 ≥6

Y1 1710-2690, Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Over All Tilts 16.6±0.5 17.2±0.3 17.4±0.4 17.6±0.4 17.9±0.6
Min Tilt 16.6 17.2 17.4 17.7 18.0
Gain (dBi)
Mid Tilt 16.7 17.2 17.5 17.8 18.1
Max Tilt 16.5 17.0 17.3 17.3 17.6
Horizontal Beamwidth (°) 65±6 63±3 63±3 63±4 64±6
Vertical Beamwidth (°) 7.6±0.5 7.1±0.4 6.6±0.7 5.5±0.6 4.9±0.5
Electrical Downtilt Deviation (°) ≤0.9 ≤0.9 ≤0.9 ≤0.9 ≤0.9
1st Upper Sidelobe Suppression (dB) ≥17 ≥18 ≥18 ≥17 ≥17
Upper Sidelobe Suppression, Peak to 20° (dB) ≥17 ≥18 ≥17 ≥16 ≥15
Front-to-Back Ratio, 180°30° (dB) ≥25 ≥25 ≥25 ≥25 ≥25
Cross-polar Discrimination@0° (dB) ≥24 ≥24 ≥23 ≥22 ≥20
Cross-polar Discrimination over Sector (dB) ≥12 ≥10 ≥8 ≥7 ≥6
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 101
DS-Control: 2-0-3 / 1216
Outdoor Directional Tri-band Antenna
ODI-065R15M18JJ-G
 XXX Pol, 65°Horizontal Beamwidth
 694-960/1710-2690/1710-2690MHz
 14.8/18.0/18.0dBi, E-Tilt: 0-14/0-10/0-10
 Integrated RCU

Connector Position Configuration Types

380

138

Connector Labeling***
Connect Code Frequency range Array
R1 694-960 c
Y1 1710-2690 r
Y2 1710-2690 l
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
00-ZJ10(18) 1 Mounting Kit, 0-18°tilt.
iRCU-302 1 Integrated RET Controller

Optional Products (order separately)

Model Quantity Description
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 102
DS-Control: 2-0-3 / 1216
Outdoor Directional Tri-band Antenna
ODV-065R16M18JJ-G
 XXX Pol, 65°Horizontal Beamwidth
 698-960/1710-2690/1710-2690MHz
 15.8/18.0/18.0dBi, E-Tilt: 0-10/0-10/0-10

Electrical Specifications
R1 698-960
Frequency Range (MHz)
698-824 790-894 880-960
Polarization ±45°
Gain (dBi) 15.4 15.6 15.8
Horizontal Beamwidth (°) 69 70 69
Vertical Beamwidth (°) 10.6 9.6 8.9
Electrical Downtilt (°) 0-10
1st Upper Sidelobe Suppression (dB) ≥17(0°), ≥16(5°), ≥15(10°)
Upper Sidelobe Suppression, Peak to 20°
≥16(0°), ≥15(5°), ≥15(10°)
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥17
Maximum Power Per Port (W) 500

Y1 1710-2690, Y2 1710-2690
Frequency Range (MHz)
1710-1990 1850-1990 1920-2170 2490-2690
Polarization ±45°
Gain (dBi) 16.7 17.0 17.2 18.0
Horizontal Beamwidth (°) 66 66 65 64
Vertical Beamwidth (°) 6.6 6.2 5.9 4.6
Electrical Downtilt (°) 0-10 / 0-10
1st Upper Sidelobe Suppression (dB) ≥16(0°), ≥15(5°), ≥14(10°)
Upper Sidelobe Suppression, Peak to 20°
≥15(0°), ≥15(5°), ≥14(10°)
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥17
Maximum Power Per Port (W) 250

VSWR ≤1.5:1
Isolation Intra-system (dB) ≥28
Isolation Inter-system (dB) ≥30
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Impedance (Ω) 50
Lightning Protection Direct Ground

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 103
DS-Control: 2-0-4 / 1216
Outdoor Directional Tri-band Antenna
ODV-065R16M18JJ-G
 XXX Pol, 65°Horizontal Beamwidth
 698-960/1710-2690/1710-2690MHz
 15.8/18.0/18.0dBi, E-Tilt: 0-10/0-10/0-10

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 2000x380x138 / 78.7x15.0x5.4
Shipping Dimensions HxWxD (mm) / (in) 2340x490x270 / 92.1x19.3x10.6
Net Weight, Antenna (kg) / (Ib) 26.0 / 57.3
Net Weight, Mounting Kit (kg) / (Ib) 5.9 / 13.0
Shipping Weight (kg) / (Ib) 39.0 / 86.0
Connector Type 6 x 7/16 DIN-Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -50 to +70
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
1000 / 171 / 1190
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

Electrical Specifications BASTA Standard**

R1 698-960
Frequency Range (MHz)
698-824 790-894 880-960
Over All Tilts 15.4±0.3 15.6±0.4 15.8±0.4
Min Tilt 15.4 15.6 15.8
Gain (dBi)
Mid Tilt 15.5 15.7 15.9
Max Tilt 15.3 15.4 15.6
Horizontal Beamwidth (°) 69±2 70±3 69±3
Vertical Beamwidth (°) 10.6±1.3 9.6±0.5 8.9±0.7
Electrical Downtilt Deviation (°) ≤0.7 ≤0.8 ≤0.9
1st Upper Sidelobe Suppression (dB) ≥18 ≥17 ≥17
Upper Sidelobe Suppression, Peak to 20°
≥17 ≥17 ≥16
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥26 ≥25 ≥25
Cross-polar Discrimination@0° (dB) ≥18 ≥19 ≥19
Cross-polar Discrimination over Sector (dB) ≥11 ≥11 ≥9

Y1 1710-2690, Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2490-2690
Over All Tilts 16.7±0.5 17.1±0.3 17.3±0.5 17.8±0.6
Min Tilt 16.7 17.0 17.2 18.0
Gain (dBi)
Mid Tilt 16.8 17.2 17.4 18.1
Max Tilt 16.7 17.0 17.1 17.4
Horizontal Beamwidth (°) 66±3 66±3 65±3 64±4
Vertical Beamwidth (°) 6.6±0.4 6.2±0.3 5.9±0.4 4.6±0.4
Electrical Downtilt Deviation (°) ≤0.7 ≤0.6 ≤0.7 ≤0.8
1st Upper Sidelobe Suppression (dB) ≥18 ≥18 ≥18 ≥17
Upper Sidelobe Suppression, Peak to 20°
≥18 ≥18 ≥18 ≥15
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥24 ≥24 ≥25 ≥24
Cross-polar Discrimination@0° (dB) ≥23 ≥23 ≥23 ≥20
Cross-polar Discrimination over Sector (dB) ≥12 ≥12 ≥11 ≥8
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 104
DS-Control: 2-0-4 / 1216
Outdoor Directional Tri-band Antenna
ODV-065R16M18JJ-G
 XXX Pol, 65°Horizontal Beamwidth
 698-960/1710-2690/1710-2690MHz
 15.8/18.0/18.0dBi, E-Tilt: 0-10/0-10/0-10

Connector Position Configuration Types

380

138

Connector Labeling***
Connect Code Frequency range Array
R1 698-960 c
Y1 1710-2690 r
Y2 1710-2690 l
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
00-ZJ10(08) 1 Mounting Kit, 0-8°tilt.

Optional Products (order separately)

Model Quantity Description
RCU-003(IV) 3 Remote Control Unit
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 105
DS-Control: 2-0-4 / 1216
Outdoor Directional Tri-band Antenna
ODI-065R16M18JJ-G
 XXX Pol, 65°Horizontal Beamwidth
 694-960/1710-2690/1710-2690MHz
 15.8/18.0/18.0dBi, E-Tilt: 0-10/0-10/0-10
 Integrated RCU

Electrical Specifications
R1 694-960
Frequency Range (MHz)
694-824 790-894 880-960
Polarization ±45°
Gain (dBi) 15.4 15.6 15.8
Horizontal Beamwidth (°) 68 67 70
Vertical Beamwidth (°) 11.0 9.9 9.0
Electrical Downtilt (°) 0-10
1st Upper Sidelobe Suppression (dB) ≥17(0°), ≥16(5°), ≥15(10°)
Front-to-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥17
Maximum Power per Port (W) 500

Y1 1710-2690, Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Polarization ±45°
Gain (dBi) 16.7 17.0 17.2 17.5 18.0
Horizontal Beamwidth (°) 63 63 62 62 64
Vertical Beamwidth (°) 7.4 6.9 6.5 5.3 5.0
Electrical Downtilt (°) 0-10 / 0-10
1st Upper Sidelobe Suppression (dB) ≥16(0°), ≥15(5°), ≥14(10°)
Front-to-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥17
Maximum Power per Port (W) 250

VSWR ≤1.5:1
Isolation Intra-system (dB) ≥28
Isolation Inter-system (dB) ≥30
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Impedance (Ω) 50
Lightning Protection Direct Ground

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 106
DS-Control: 2-0-3 / 1216
Outdoor Directional Tri-band Antenna
ODI-065R16M18JJ-G
 XXX Pol, 65°Horizontal Beamwidth
 694-960/1710-2690/1710-2690MHz
 15.8/18.0/18.0dBi, E-Tilt: 0-10/0-10/0-10
 Integrated RCU

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 2000x380x138 / 78.7x15.0x5.4
Shipping Dimensions, HxWxD (mm) / (in) 2340x490x270 / 92.1x19.3x10.6
Net Weight, Antenna (kg) / (Ib) 25.4 / 56.0
Net Weight, Mounting Kit (kg) / (Ib) 5.9 / 13.0
Shipping Weight (kg) / (Ib) 39.3 / 86.6
Connector Type 6 x 7/16 DIN-Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -40 to +60
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
1000 / 171 / 1190
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

RET Specifications
Protocol to CCU/TMA 3GPP / AISG 2.0
Input Voltage Range (V) +10 to +30 DC
Power Consumption (W) ≤2(stand by); ≤13(operating)
Connectors to CCU 8 pin connector, Male, conform to AISG 2.0
Connectors to RCU 8 pin connector, Female, conform to AISG 2.0
Dimensions, HxWxD (mm) / (in)
100x53x26 / 3.9x2.1x1.0
(excluding connector)
Weight, w/o Mounting Kit (kg) / (lb) 0.16 / 0.35

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 107
DS-Control: 2-0-3 / 1216
Outdoor Directional Tri-band Antenna
ODI-065R16M18JJ-G
 XXX Pol, 65°Horizontal Beamwidth
 694-960/1710-2690/1710-2690MHz
 15.8/18.0/18.0dBi, E-Tilt: 0-10/0-10/0-10
 Integrated RCU

Electrical Specifications BASTA Standard**

R1 694-960
Frequency Range (MHz)
694-824 790-894 880-960
Over All Tilts 15.4±0.3 15.6±0.4 15.8±0.4
Min Tilt 15.4 15.6 15.8
Gain (dBi)
Mid Tilt 15.5 15.7 15.9
Max Tilt 15.3 15.4 15.6
Horizontal Beamwidth (°) 68±2 67±4 70±3
Vertical Beamwidth (°) 11.0±1.5 9.9±1.2 9.0±0.6
Electrical Downtilt Deviation (°) ≤0.4 ≤0.5 ≤0.5
1st Upper Sidelobe Suppression (dB) ≥19 ≥19 ≥22
Upper Sidelobe Suppression, Peak to 20°
≥19 ≥18 ≥18
(dB)
Front-to-Back Ratio, 180°30° (dB) ≥26 ≥26 ≥25
Cross-polar Discrimination@0° (dB) ≥25 ≥25 ≥22
Cross-polar Discrimination over Sector (dB) ≥11 ≥10 ≥9

Y1 1710-2690, Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Over All Tilts 16.7±0.5 17.1±0.3 17.3±0.5 17.5±0.3 17.8±0.6
Min Tilt 16.7 17.0 17.2 17.5 18.0
Gain (dBi)
Mid Tilt 16.8 17.2 17.4 17.6 18.1
Max Tilt 16.7 17.0 17.1 17.4 17.4
Horizontal Beamwidth (°) 63±4 63±3 62±3 62±4 64±4
Vertical Beamwidth (°) 7.4±0.6 6.9±0.3 6.5±0.7 5.3±0.5 5.0±0.3
Electrical Downtilt Deviation (°) ≤0.3 ≤0.3 ≤0.5 ≤0.4 ≤0.5
1st Upper Sidelobe Suppression (dB) ≥19 ≥21 ≥21 ≥19 ≥17
Upper Sidelobe Suppression, Peak to 20°
≥18 ≥19 ≥18 ≥16 ≥16
(dB)
Front-to-Back Ratio, 180°30° (dB) ≥25 ≥25 ≥25 ≥24 ≥25
Cross-polar Discrimination@0° (dB) ≥25 ≥26 ≥26 ≥24 ≥24
Cross-polar Discrimination over Sector (dB) ≥12 ≥12 ≥8 ≥7 ≥8
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 108
DS-Control: 2-0-3 / 1216
Outdoor Directional Tri-band Antenna
ODI-065R16M18JJ-G
 XXX Pol, 65°Horizontal Beamwidth
 694-960/1710-2690/1710-2690MHz
 15.8/18.0/18.0dBi, E-Tilt: 0-10/0-10/0-10
 Integrated RCU

Connector Position Configuration Types

380

138

Connector Labeling***
Connect Code Frequency range Array
R1 694-960 c
Y1 1710-2690 r
Y2 1710-2690 l
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
00-ZJ10(08) 1 Mounting Kit, 0-8°tilt.
iRCU-302 1 Integrated RET Controller

Optional Products (order separately)

Model Quantity Description
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 109
DS-Control: 2-0-3 / 1216
Outdoor Directional Tri-band Antenna
ODV-065R17M18JJ-G
 XXX Pol, 65°Horizontal Beamwidth
 694-960/1710-2690/1710-2690MHz
 16.8/17.5/18.0dBi, E-Tilt: 0-10/0-10/0-10

Electrical Specifications
R1 694-960
Frequency Range (MHz)
694-824 790-894 880-960
Polarization ±45°
Gain (dBi) 16.0 16.5 16.8
Horizontal Beamwidth (°) 69 68 68
Vertical Beamwidth (°) 8.7 7.9 7.4
Electrical Downtilt (°) 0-10
1st Upper Sidelobe Suppression (dB) ≥17(0°), ≥16(5°), ≥15(10°)
Upper Sidelobe Suppression, Peak to 20°
≥16(0°), ≥16(5°), ≥15(10°)
(dB)
Front-to-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥15
Maximum Power per Port (W) 500

Y1 1710-2690, Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Polarization ±45°
Top 16.2 16.4 16.9 16.9 17.5
Gain (dBi)
Bottom 16.7 17.0 17.5 17.6 18.0
Horizontal Beamwidth (°) 66 61 61 60 63
Vertical Beamwidth (°) 7.5 7.2 6.5 5.5 5.0
Electrical Downtilt (°) 0-10 / 0-10
1st Upper Sidelobe Suppression (dB) ≥16(0°), ≥15(5°), ≥14(10°)
Upper Sidelobe Suppression, Peak to 20°
≥15(0°), ≥15(5°), ≥14(10°)
(dB)
Front-to-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥15
Maximum Power per Port (W) 250

VSWR ≤1.5:1
Isolation Intra-system (dB) ≥28
Isolation Inter-system (dB) ≥30
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Impedance (Ω) 50
Lightning Protection Direct Ground

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 110
DS-Control: 2-0-1 / 1216
Outdoor Directional Tri-band Antenna
ODV-065R17M18JJ-G
 XXX Pol, 65°Horizontal Beamwidth
 694-960/1710-2690/1710-2690MHz
 16.8/17.5/18.0dBi, E-Tilt: 0-10/0-10/0-10

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 2680x320x145 / 105.5x12.6x5.7
Shipping Dimensions HxWxD (mm) / (in) 2995x430x270 / 117.9x16.9x10.6
Net Weight, Antenna (kg) / (Ib) 30.0 / 66.1
Net Weight, Mounting Kit (kg) / (Ib) 9.4 / 20.7
Shipping Weight (kg) / (Ib) 47.9 / 105.6
Connector Type 6 x 7/16 DIN-Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -50 to +70
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
1081 / 238 / 1350
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 111
DS-Control: 2-0-1 / 1216
Outdoor Directional Tri-band Antenna
ODV-065R17M18JJ-G
 XXX Pol, 65°Horizontal Beamwidth
 694-960/1710-2690/1710-2690MHz
 16.8/17.5/18.0dBi, E-Tilt: 0-10/0-10/0-10

Electrical Specifications BASTA Standard**

R1 694-960
Frequency Range (MHz)
694-824 790-894 880-960
Over All Tilts 15.9±0.6 16.4±0.4 16.6±0.4
Min Tilt 16.0 16.5 16.8
Gain (dBi)
Mid Tilt 16.0 16.5 16.7
Max Tilt 15.7 16.3 16.2
Horizontal Beamwidth (°) 69±4 68±4 68±4
Vertical Beamwidth (°) 8.7±0.8 7.9±0.5 7.4±0.5
Electrical Downtilt Deviation (°) ≤0.5 ≤0.6 ≤0.5
1st Upper Sidelobe Suppression (dB) ≥18 ≥18 ≥17
Upper Sidelobe Suppression, Peak to 20°
≥18 ≥18 ≥17
(dB)
Front-to-Back Ratio, 180°30° (dB) ≥24 ≥27 ≥27
Cross-polar Discrimination@0° (dB) ≥22 ≥22 ≥20
Cross-polar Discrimination over Sector (dB) ≥14 ≥13 ≥11

Y1 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Over All Tilts 16.1±0.6 16.3±0.3 16.8±0.9 17.1±0.5 17.3±0.6
Min Tilt 16.2 16.4 16.9 16.9 17.5
Gain (dBi)
Mid Tilt 16.2 16.4 17.0 17.2 17.4
Max Tilt 16.0 16.2 16.6 17.2 16.9
Horizontal Beamwidth (°) 66±7 61±5 61±4 60±6 63±6
Vertical Beamwidth (°) 7.5±0.5 7.2±0.5 6.5±0.8 5.5±0.4 5.0±0.4
Electrical Downtilt Deviation (°) ≤0.7 ≤0.5 ≤0.5 ≤0.5 ≤0.4
1st Upper Sidelobe Suppression (dB) ≥17 ≥17 ≥16 ≥16 ≥17
Upper Sidelobe Suppression, Peak to 20°
≥17 ≥17 ≥16 ≥15 ≥16
(dB)
Front-to-Back Ratio, 180°30° (dB) ≥25 ≥26 ≥27 ≥26 ≥27
Cross-polar Discrimination@0° (dB) ≥18 ≥21 ≥22 ≥20 ≥22
Cross-polar Discrimination over Sector (dB) ≥12 ≥11 ≥9 ≥8 ≥7

Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Over All Tilts 16.6±0.6 17.0±0.4 17.4±0.9 17.7±0.4 17.9±0.7
Min Tilt 16.7 17.0 17.5 17.6 18.0
Gain (dBi)
Mid Tilt 16.7 17.1 17.6 17.7 18.1
Max Tilt 16.4 16.8 17.0 17.6 17.4
Horizontal Beamwidth (°) 66±7 61±5 61±4 60±6 63±6
Vertical Beamwidth (°) 7.5±0.5 7.2±0.5 6.5±0.8 5.5±0.4 5.0±0.4
Electrical Downtilt Deviation (°) ≤0.5 ≤0.5 ≤0.5 ≤0.7 ≤0.5
1st Upper Sidelobe Suppression (dB) ≥17 ≥17 ≥16 ≥16 ≥18
Upper Sidelobe Suppression, Peak to 20°
≥16 ≥16 ≥15 ≥15 ≥14
(dB)
Front-to-Back Ratio, 180°30° (dB) ≥26 ≥27 ≥27 ≥25 ≥26
Cross-polar Discrimination@0° (dB) ≥19 ≥21 ≥22 ≥20 ≥19
Cross-polar Discrimination over Sector (dB) ≥12 ≥11 ≥9 ≥8 ≥6
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 112
DS-Control: 2-0-1 / 1216
Outdoor Directional Tri-band Antenna
ODV-065R17M18JJ-G
 XXX Pol, 65°Horizontal Beamwidth
 694-960/1710-2690/1710-2690MHz
 16.8/17.5/18.0dBi, E-Tilt: 0-10/0-10/0-10

Connector Position Configuration Types

320

145

Connector Labeling***
Connect Code Frequency range Array
R1 694-960 r
Y1 1710-2690 lt
Y2 1710-2690 lb
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
00-ZJ10(08) (three mounting points) 1 Mounting Kit, 0-8°tilt.

Optional Products (order separately)

Model Quantity Description
RCU-003(IV) 3 Remote Control Unit
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 113
DS-Control: 2-0-1 / 1216
Outdoor Directional Tri-band Antenna
ODI-065R17M18JJ-G
 XXX Pol, 65°Horizontal Beamwidth
 694-960/1710-2690/1710-2690MHz
 16.8/17.5/18.0dBi, E-Tilt: 0-10/0-10/0-10
 Integrated RCU

Electrical Specifications
R1 694-960
Frequency Range (MHz)
694-824 790-894 880-960
Polarization ±45°
Gain (dBi) 16.0 16.5 16.8
Horizontal Beamwidth (°) 69 68 68
Vertical Beamwidth (°) 8.7 7.9 7.4
Electrical Downtilt (°) 0-10
1st Upper Sidelobe Suppression (dB) ≥17(0°), ≥16(5°), ≥15(10°)
Front-to-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥15
Maximum Power per Port (W) 500

Y1 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Polarization ±45°
Gain (dBi) 16.2 16.4 16.9 16.9 17.5
Horizontal Beamwidth (°) 66 61 61 60 63
Vertical Beamwidth (°) 7.5 7.2 6.5 5.5 5.0
Electrical Downtilt (°) 0-10
1st Upper Sidelobe Suppression (dB) ≥16(0°), ≥15(5°), ≥14(10°)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥15
Maximum Power per Port (W) 250

Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Polarization ±45°
Gain (dBi) 16.7 17.0 17.5 17.6 18.0
Horizontal Beamwidth (°) 66 61 61 60 63
Vertical Beamwidth (°) 7.5 7.2 6.5 5.5 5.0
Electrical Downtilt (°) 0-10
1st Upper Sidelobe Suppression (dB) ≥16(0°), ≥15(5°), ≥14(10°)
Front-to-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥15
Maximum Power per Port (W) 250

VSWR ≤1.5:1
Isolation Intra-system (dB) ≥28
Isolation Inter-system (dB) ≥30
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Impedance (Ω) 50
Lightning Protection Direct Ground

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 114
DS-Control: 1-0-6 / 1216
Outdoor Directional Tri-band Antenna
ODI-065R17M18JJ-G
 XXX Pol, 65°Horizontal Beamwidth
 694-960/1710-2690/1710-2690MHz
 16.8/17.5/18.0dBi, E-Tilt: 0-10/0-10/0-10
 Integrated RCU

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 2680x320x145 / 105.5x12.6x5.7
Shipping Dimensions, HxWxD (mm) / (in) 2995x430x270 / 117.9x16.9x10.6
Net Weight, Antenna (kg) / (Ib) 34.8 / 76.7
Net Weight, Mounting Kit (kg) / (Ib) 9.4 / 20.7
Shipping Weight (kg) / (Ib) 53.3 / 117.5
Connector Type 6 x 7/16 DIN-Female

2454
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -40 to +60

1354
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
68
Wind Load* @150km/h
1081 / 238 / 1350
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

RET Specifications
Protocol to CCU/TMA 3GPP / AISG 2.0
Input Voltage Range (V) +10 to +30 DC
Power Consumption (W) ≤2(stand by); ≤13(operating)
Connectors to CCU 8 pin connector, Male, conform to AISG 2.0
Connectors to RCU 8 pin connector, Female, conform to AISG 2.0
Dimensions, HxWxD (mm) / (in)
100x53x26 / 3.9x2.1x1.0
(excluding connector)
Weight, w/o Mounting Kit (kg) / (lb) 0.16 / 0.35

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 115
DS-Control: 1-0-6 / 1216
Outdoor Directional Tri-band Antenna
ODI-065R17M18JJ-G
 XXX Pol, 65°Horizontal Beamwidth
 694-960/1710-2690/1710-2690MHz
 16.8/17.5/18.0dBi, E-Tilt: 0-10/0-10/0-10
 Integrated RCU

Electrical Specifications BASTA Standard**

R1 694-960
Frequency Range (MHz)
694-824 790-894 880-960
Over All Tilts 15.9±0.6 16.4±0.4 16.6±0.4
Min Tilt 16.0 16.5 16.8
Gain (dBi)
Mid Tilt 16.0 16.5 16.7
Max Tilt 15.7 16.3 16.2
Horizontal Beamwidth (°) 69±4 68±4 68±4
Vertical Beamwidth (°) 8.7±0.8 7.9±0.5 7.4±0.5
Electrical Downtilt Deviation (°) ≤0.5 ≤0.6 ≤0.5
1st Upper Sidelobe Suppression (dB) ≥18 ≥18 ≥17
Upper Sidelobe Suppression, Peak to 20°
≥18 ≥18 ≥17
(dB)
Front-to-Back Ratio, 180°30° (dB) ≥24 ≥27 ≥27
Cross-polar Discrimination@0° (dB) ≥22 ≥22 ≥20
Cross-polar Discrimination over Sector (dB) ≥14 ≥13 ≥11

Y1 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Over All Tilts 16.1±0.6 16.3±0.3 16.8±0.9 17.1±0.5 17.3±0.6
Min Tilt 16.2 16.4 16.9 16.9 17.5
Gain (dBi)
Mid Tilt 16.2 16.4 17.0 17.2 17.4
Max Tilt 16.0 16.2 16.6 17.2 16.9
Horizontal Beamwidth (°) 66±7 61±5 61±4 60±6 63±6
Vertical Beamwidth (°) 7.5±0.5 7.2±0.5 6.5±0.8 5.5±0.4 5.0±0.4
Electrical Downtilt Deviation (°) ≤0.7 ≤0.5 ≤0.5 ≤0.5 ≤0.4
1st Upper Sidelobe Suppression (dB) ≥17 ≥17 ≥16 ≥16 ≥17
Upper Sidelobe Suppression, Peak to 20°
≥17 ≥17 ≥16 ≥15 ≥16
(dB)
Front-to-Back Ratio, 180°30° (dB) ≥25 ≥26 ≥27 ≥26 ≥27
Cross-polar Discrimination@0° (dB) ≥18 ≥21 ≥22 ≥20 ≥22
Cross-polar Discrimination over Sector (dB) ≥12 ≥11 ≥9 ≥8 ≥7

Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Over All Tilts 16.6±0.6 17.0±0.4 17.4±0.9 17.7±0.4 17.9±0.7
Min Tilt 16.7 17.0 17.5 17.6 18.0
Gain (dBi)
Mid Tilt 16.7 17.1 17.6 17.7 18.1
Max Tilt 16.4 16.8 17.0 17.6 17.4
Horizontal Beamwidth (°) 66±7 61±5 61±4 60±6 63±6
Vertical Beamwidth (°) 7.5±0.5 7.2±0.5 6.5±0.8 5.5±0.4 5.0±0.4
Electrical Downtilt Deviation (°) ≤0.5 ≤0.5 ≤0.5 ≤0.7 ≤0.5
1st Upper Sidelobe Suppression (dB) ≥17 ≥17 ≥16 ≥16 ≥18
Upper Sidelobe Suppression, Peak to 20°
≥16 ≥16 ≥15 ≥15 ≥14
(dB)
Front-to-Back Ratio, 180°30° (dB) ≥26 ≥27 ≥27 ≥25 ≥26
Cross-polar Discrimination@0° (dB) ≥19 ≥21 ≥22 ≥20 ≥19
Cross-polar Discrimination over Sector (dB) ≥12 ≥11 ≥9 ≥8 ≥6
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 116
DS-Control: 1-0-6 / 1216
Outdoor Directional Tri-band Antenna
ODI-065R17M18JJ-G
 XXX Pol, 65°Horizontal Beamwidth
 694-960/1710-2690/1710-2690MHz
 16.8/17.5/18.0dBi, E-Tilt: 0-10/0-10/0-10
 Integrated RCU

Connector Position Configuration Types

320

145

Connector Labeling***
Connect Code Frequency range Array
R1 694-960 r
Y1 1710-2690 tl
Y2 1710-2690 bl
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
00-ZJ10(08) (three mounting points) 1 Mounting Kit, 0-8°tilt.
iRCU-302 1 Integrated RET Controller

Optional Products (order separately)

Model Quantity Description
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 117
DS-Control: 1-0-6 / 1216
Outdoor Directional Quad-band Antenna
ODI4-065R18J-G
 XXXX Pol, 65°Horizontal Beamwidth
 1710-2690/1710-2690/1710-2690/1710-2690MHz
 18.0/18.5/18.0/18.5dBi, E-Tilt: 0-10/0-10/0-10/0-10
 Integrated RCU

Electrical Specifications
Y1 1710-2690, Y3 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Polarization ±45°
Gain (dBi) 17.0 17.0 17.4 17.8 18.0
Horizontal Beamwidth (°) 68 67 66 65 63
Vertical Beamwidth (°) 7.8 7.3 6.9 5.7 5.2
Electrical Downtilt (°) 0-10 / 0-10
1st Upper Sidelobe Suppression (dB) ≥16(0°), ≥15(5°), ≥15(10°)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥17
Cross-polar Discrimination over Sector (dB) ≥10 ≥7(typ.)
Maximum Power per Port (W) 250

Y2 1710-2690, Y4 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Polarization ±45°
Gain (dBi) 17.3 17.4 17.8 18.2 18.5
Horizontal Beamwidth (°) 68 67 66 65 63
Vertical Beamwidth (°) 7.9 7.3 6.8 5.7 5.2
Electrical Downtilt (°) 0-10 / 0-10
1st Upper Sidelobe Suppression (dB) ≥16(0°), ≥15(5°), ≥15(10°)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥17
Cross-polar Discrimination over Sector (dB) ≥10 ≥7(typ.)
Maximum Power per Port (W) 250

VSWR ≤1.5:1
Isolation Intra-system (dB) ≥28
Isolation Inter-system (dB) ≥30
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Impedance (Ω) 50
Lightning Protection Direct Ground

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 118
DS-Control:1-0-3 / 1216
Outdoor Directional Quad-band Antenna
ODI4-065R18J-G
 XXXX Pol, 65°Horizontal Beamwidth
 1710-2690/1710-2690/1710-2690/1710-2690MHz
 18.0/18.5/18.0/18.5dBi, E-Tilt: 0-10/0-10/0-10/0-10
 Integrated RCU

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 2680x265x120 / 105.5x10.4x4.7
Shipping Dimensions, HxWxD(mm) / (in) 3295x375x250 / 129.7x14.8x9.8
Net Weight, Antenna (kg) / (Ib) 26.0 / 57.3
Net Weight, Mounting Kit (kg) / (Ib) 9.4 / 20.7
Shipping Weight (kg) / (Ib) 40.5 / 89.3
Connector Type 8 x 7/16 DIN-Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -40 to +60
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
832 / 206 / 994
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

RET Specifications
Protocol to CCU/TMA 3GPP / AISG 2.0
Input Voltage Range (V) +10 to +30 DC
Power Consumption (W) ≤2(stand by); ≤13(operating)
Connectors to CCU 8 pin connector, Male, conform to AISG 2.0
Connectors to RCU 8 pin connector, Female, conform to AISG 2.0
Dimensions, HxWxD (mm) / (in)
116x53x26 / 4.6x2.1x1.0
(excluding connector)
Weight, w/o Mounting Kit (kg) / (lb) 0.2 / 0.4

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 119
DS-Control:1-0-3 / 1216
Outdoor Directional Quad-band Antenna
ODI4-065R18J-G
 XXXX Pol, 65°Horizontal Beamwidth
 1710-2690/1710-2690/1710-2690/1710-2690MHz
 18.0/18.5/18.0/18.5dBi, E-Tilt: 0-10/0-10/0-10/0-10
 Integrated RCU

Electrical Specifications BASTA Standard**

Y1 1710-2690, Y3 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Over All Tilts 17.0±0.4 17.0±0.4 17.3±0.6 17.6±0.6 17.7±0.5
Min Tilt 17.0 17.0 17.4 17.8 18.0
Gain (dBi)
Mid Tilt 17.1 17.2 17.5 17.6 17.8
Max Tilt 16.8 16.9 17.0 17.4 17.3
Horizontal Beamwidth (°) 68±3 67±2 66±2 65±5 63±5
Vertical Beamwidth (°) 7.8±0.5 7.3±0.3 6.9±0.6 5.7±0.4 5.2±0.3
Electrical Downtilt Deviation (°) ≤0.8 ≤0.7 ≤0.7 ≤0.6 ≤0.7
1st Upper Sidelobe Suppression (dB) ≥18 ≥18 ≥18 ≥19 ≥19
Upper Sidelobe Suppression, Peak to 20°
≥14 ≥14 ≥15 ≥15 ≥14
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥26 ≥26 ≥27 ≥27 ≥26
Cross-polar Discrimination@0° (dB) ≥28 ≥26 ≥25 ≥22 ≥21
Cross-polar Discrimination over Sector (dB) ≥14 ≥14 ≥12 ≥10 ≥8

Y2 1710-2690, Y4 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Over All Tilts 17.3±0.3 17.4±0.3 17.7±0.3 18.0±0.6 18.2±0.4
Min Tilt 17.3 17.4 17.8 18.2 18.5
Gain (dBi)
Mid Tilt 17.4 17.6 17.9 18.0 18.3
Max Tilt 17.1 17.3 17.4 17.8 17.8
Horizontal Beamwidth (°) 68±3 67±2 66±2 65±5 63±5
Vertical Beamwidth (°) 7.9±0.4 7.3±0.5 6.8±0.6 5.7±0.4 5.2±0.3
Electrical Downtilt Deviation (°) ≤0.9 ≤0.8 ≤0.9 ≤0.6 ≤0.8
1st Upper Sidelobe Suppression (dB) ≥18 ≥18 ≥18 ≥19 ≥19
Upper Sidelobe Suppression, Peak to 20°
≥16 ≥17 ≥17 ≥16 ≥15
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥26 ≥26 ≥26 ≥25 ≥25
Cross-polar Discrimination@0° (dB) ≥29 ≥26 ≥26 ≥22 ≥21
Cross-polar Discrimination over Sector (dB) ≥14 ≥14 ≥12 ≥10 ≥8
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 120
DS-Control:1-0-3 / 1216
Outdoor Directional Quad-band Antenna
ODI4-065R18J-G
 XXXX Pol, 65°Horizontal Beamwidth
 1710-2690/1710-2690/1710-2690/1710-2690MHz
 18.0/18.5/18.0/18.5dBi, E-Tilt: 0-10/0-10/0-10/0-10
 Integrated RCU

Connector Position Configuration Types

265
Y3 Y1

120

Y4 Y2

Connector Labeling***
Connect Code Frequency range Array
Y1 1710-2690 tr
Y2 1710-2690 br
Y3 1710-2690 tl
Y4 1710-2690 bl
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
00-ZJ10(08) (three mounting points) 1 Mounting Kit, 0-8°tilt.
iRCU-502 1 Integrated RET Controller

Optional Products (order separately)

Model Quantity Description
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 121
DS-Control:1-0-3 / 1216
Outdoor Directional Quad-band Antenna
ODI2-065R15M18J-G
 XXXX Pol, 65°Horizontal Beamwidth
 694-960/694-960/1710-2690/1710-2690MHz
 14.5/14.5/17.5/17.5dBi, E-Tilt: 0-14/0-14/0-10/0-10
 Integrated RCU

Electrical Specifications
R1 694-960, R2 694-960
Frequency Range (MHz)
694-824 790-894 880-960
Polarization ±45°
Gain (dBi) 13.5 14.1 14.5
Horizontal Beamwidth (°) 63 59 55
Vertical Beamwidth (°) 17.4 15.7 14.2
Electrical Downtilt (°) 0-14 / 0-14
1st Upper Sidelobe Suppression (dB) ≥16(0°), ≥15(7°), ≥14(14°)
Upper Sidelobe Suppression, Peak to 20°
≥15(0°), ≥15(7°), ≥13(14°)
(dB)
Front-To-Back Ratio 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥18(typ.)
Isolation Intra-system (dB) ≥25
≥25(694-960/694-960)
Isolation Inter-system (dB)
≥30(694-960/1710-2690)
Maximum Power per Port (W) 500

Y1 1710-2690, Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Polarization ±45°
Gain (dBi) 16.7 17.0 17.2 17.4 17.5
Horizontal Beamwidth (°) 64 60 60 58 57
Vertical Beamwidth (°) 7.0 6.7 6.0 5.4 4.9
Electrical Downtilt (°) 0-10 / 0-10
1st Upper Sidelobe Suppression (dB) ≥17(0°), ≥16(5°), ≥14(10°)
Upper Sidelobe Suppression, Peak to 20°
≥15(0°), ≥13(5°), ≥13(10°)
(dB)
Front-To-Back Ratio 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥20(typ.)
Isolation Intra-system (dB) ≥28
Isolation Inter-system (dB) ≥30
Maximum Power per Port (W) 250

VSWR ≤1.5:1
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Impedance (Ω) 50
Lightning Protection Direct Ground

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 122
DS-Control:0-0-11 / 1216
Outdoor Directional Quad-band Antenna
ODI2-065R15M18J-G
 XXXX Pol, 65°Horizontal Beamwidth
 694-960/694-960/1710-2690/1710-2690MHz
 14.5/14.5/17.5/17.5dBi, E-Tilt: 0-14/0-14/0-10/0-10
 Integrated RCU

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 1500x445x130 / 59.1x17.5x5.1
Shipping Dimensions, HxWxD(mm) / (in) 1720x570x285 / 67.7x22.4x11.2
Net Weight, Antenna (kg) / (Ib) 28.5 / 62.8
Net Weight, Mounting Kit (kg) / (Ib) 5.9 / 13.0
Shipping Weight (kg) / (Ib) 42.5 / 93.7
Connector Type 8x 7/16 DIN-Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -40 to +60
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
810 / 102 / 975
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

RET Specifications
Protocol to CCU/TMA 3GPP / AISG 2.0
Input Voltage Range (V) +10 to +30 DC
Power Consumption (W) ≤2(stand by); ≤13(operating)
Connectors to CCU 8 pin connector, Male, conform to AISG 2.0
Connectors to RCU 8 pin connector, Female, conform to AISG 2.0
Dimensions, HxWxD (mm) / (in)
116x53x26 / 4.6x2.1x1.0
(excluding connector)
Weight, w/o Mounting Kit (kg) / (lb) 0.2 / 0.4

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 123
DS-Control:0-0-11 / 1216
Outdoor Directional Quad-band Antenna
ODI2-065R15M18J-G
 XXXX Pol, 65°Horizontal Beamwidth
 694-960/694-960/1710-2690/1710-2690MHz
 14.5/14.5/17.5/17.5dBi, E-Tilt: 0-14/0-14/0-10/0-10
 Integrated RCU

Electrical Specifications BASTA Standard**

R1 694-960, R2 694-960
Frequency Range (MHz)
694-824 790-894 880-960
Over All Tilts 13.3±0.8 13.9±0.5 14.2±0.6
Min Tilt 13.5 14.1 14.5
Gain (dBi)
Mid Tilt 13.3 13.9 14.2
Max Tilt 13.1 13.8 14.0
Horizontal Beamwidth (°) 63±8 59±6 55±5
Vertical Beamwidth (°) 17.4±1.6 15.7±1.2 14.2±0.9
Electrical Downtilt Deviation ≤1.0 ≤1.0 ≤1.0
1st Upper Sidelobe Suppression (dB) ≥17 ≥18 ≥17
Upper Sidelobe Suppression, Peak to 20°
≥19 ≥18 ≥17
(dB)
Front-To-Back Ratio 180°30° (dB) ≥25 ≥25 ≥25
Cross-polar Discrimination@0° (dB) ≥18 ≥21 ≥20
Cross-polar Discrimination over Sector (dB) ≥9 ≥9 ≥9

Y1 1710-2690, Y2 2170-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Over All Tilts 16.4±0.5 16.8±0.5 17.0±0.6 17.3±0.6 17.4±0.4
Min Tilt 16.7 17.0 17.2 17.4 17.5
Gain (dBi)
Mid Tilt 16.5 16.9 17.0 17.2 17.4
Max Tilt 16.2 16.7 16.8 17.0 17.3
Horizontal Beamwidth (°) 64±6 60±7 60±6 58±6 57±4
Vertical Beamwidth (°) 7.0±0.6 6.7±0.3 6.0±0.5 5.4±0.3 4.9±0.3
Electrical Downtilt Deviation ≤0.8 ≤0.8 ≤0.9 ≤0.7 ≤0.8
1st Upper Sidelobe Suppression (dB) ≥17 ≥18 ≥17 ≥17 ≥18
Upper Sidelobe Suppression, Peak to 20°
≥16 ≥17 ≥17 ≥17 ≥16
(dB)
Front-To-Back Ratio 180°30° (dB) ≥25 ≥27 ≥27 ≥27 ≥25
Cross-polar Discrimination@0° (dB) ≥17 ≥17 ≥18 ≥19 ≥19
Cross-polar Discrimination over Sector (dB) ≥11 ≥13 ≥12 ≥7 ≥8
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 124
DS-Control:0-0-11 / 1216
Outdoor Directional Quad-band Antenna
ODI2-065R15M18J-G
 XXXX Pol, 65°Horizontal Beamwidth
 694-960/694-960/1710-2690/1710-2690MHz
 14.5/14.5/17.5/17.5dBi, E-Tilt: 0-14/0-14/0-10/0-10
 Integrated RCU

Connector Position Configuration Types

445

130

Connector Labeling***
Connect Code Frequency range Array
R1 694-960 r
R2 694-960 l
Y1 1710-2690 r
Y2 1710-2690 l
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
00-ZJ10(18) 1 Mounting Kit, 0-18°tilt.
iRCU-502 1 Integrated RET Controller

Optional Products (order separately)

Model Quantity Description
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 125
DS-Control:0-0-11 / 1216
Outdoor Directional Quad-band Antenna
ODI2-065R16M18J-GQ
 XXXX Pol, 65°Horizontal Beamwidth
 694-960/694-960/1710-2690/1710-2690MHz
 15.5/15.5/17.5/17.5dBi, E-Tilt: 0-10/0-10/0-10/0-10
 Integrated RCU

Electrical Specifications
R1 694-960, R2 694-960
Frequency Range (MHz)
694-824 790-894 880-960
Polarization ±45°
Gain (dBi) 14.4 14.8 15.5
Horizontal Beamwidth (°) 67 63 59
Vertical Beamwidth (°) 12.3 10.8 10.0
Electrical Downtilt (°) 0-10 / 0-10
1st Upper Sidelobe Suppression (dB) ≥16(0°), ≥15(5°), ≥14(10°)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥17(typ.)
Isolation Intra-system (dB) ≥26
Maximum Power per Port (W) 500

Y1 1710-2690, Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Polarization ±45°
Gain (dBi) 16.4 17.0 17.4 17.5 17.2
Horizontal Beamwidth (°) 66 63 63 60 64
Vertical Beamwidth (°) 6.7 6.1 5.7 4.8 4.5
Electrical Downtilt (°) 0-10 / 0-10
1st Upper Sidelobe Suppression (dB) ≥15(0°), ≥15(5°), ≥14(10°)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0°(dB) ≥17(typ.)
Isolation Intra-system (dB) ≥28
Maximum Power per Port (W) 250

VSWR ≤1.5:1
≥26(694-960 / 694-960)
Isolation Inter-system (dB) ≥30(694-960 / 1710-2690)
≥30(1710-2690 / 1710-2690)
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Impedance (Ω) 50
Lightning Protection Direct Ground

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 126
DS-Control:0-0-4 / 1216
Outdoor Directional Quad-band Antenna
ODI2-065R16M18J-GQ
 XXXX Pol, 65°Horizontal Beamwidth
 694-960/694-960/1710-2690/1710-2690MHz
 15.5/15.5/17.5/17.5dBi, E-Tilt: 0-10/0-10/0-10/0-10
 Integrated RCU

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 2000x445x130 / 78.7x17.5x5.1
Shipping Dimensions, HxWxD(mm) / (in) 2320x570x285 / 91.3x22.4x11.2
Net Weight, Antenna (kg) / (Ib) 36.5 / 80.5
Net Weight, Mounting Kit (kg) / (Ib) 9.4 / 20.7
Shipping Weight (kg) / (Ib) 56.5 / 124.6
Connector Type 8 x 4.3-10 Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -40 to +60
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
1219 / 157 / 1485
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

RET Specifications
Protocol to CCU/TMA 3GPP / AISG 2.0
Input Voltage Range (V) +10 to +30 DC
Power Consumption (W) ≤2(stand by); ≤13(operating)
Connectors to CCU 8 pin connector, Male, conform to AISG 2.0
Connectors to RCU 8 pin connector, Female, conform to AISG 2.0
Dimensions, HxWxD (mm) / (in)
116x53x26 / 4.6x2.1x1.0
(excluding connector)
Weight, w/o Mounting Kit (kg) / (lb) 0.2 / 0.4

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 127
DS-Control:0-0-4 / 1216
Outdoor Directional Quad-band Antenna
ODI2-065R16M18J-GQ
 XXXX Pol, 65°Horizontal Beamwidth
 694-960/694-960/1710-2690/1710-2690MHz
 15.5/15.5/17.5/17.5dBi, E-Tilt: 0-10/0-10/0-10/0-10
 Integrated RCU

Electrical Specifications BASTA Standard**

R1 694-960, R2 694-960
Frequency Range (MHz)
694-824 790-894 880-960
Over All Tilts 14.2±0.5 14.7±0.6 15.3±0.5
Min Tilt 14.4 14.8 15.5
Gain (dBi)
Mid Tilt 14.2 14.7 15.3
Max Tilt 14.0 14.7 15.2
Horizontal Beamwidth (°) 69±8 63±5 59±5
Vertical Beamwidth (°) 12.3±1.5 10.8±1.2 10.0±0.6
Electrical Downtilt Deviation (°) ≤1.0 ≤1.0 ≤1.0
1st Upper Sidelobe Suppression (dB) ≥16 ≥16 ≥16
Upper Sidelobe Suppression, Peak to 20° (dB) ≥16 ≥15 ≥15
Front-To-Back Ratio, 180°30° (dB) ≥24 ≥25 ≥25
Cross-polar Discrimination@0° (dB) ≥17 ≥18 ≥21
Cross-polar Discrimination over Sector (dB) ≥9 ≥9 ≥10

Y1 1710-2690, Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Over All Tilts 16.1±0.5 16.8±0.6 17.0±0.5 17.2±0.4 16.9±0.6
Min Tilt 16.4 17.0 17.4 17.5 17.2
Gain (dBi)
Mid Tilt 16.1 16.8 17.0 17.2 16.9
Max Tilt 15.8 16.6 16.7 16.9 16.7
Horizontal Beamwidth (°) 66±7 63±8 63±7 60±6 64±9
Vertical Beamwidth (°) 6.7±0.7 6.1±0.5 5.7±0.8 4.8±0.5 4.5±0.4
Electrical Downtilt Deviation (°) ≤0.6 ≤0.7 ≤0.7 ≤0.7 ≤0.8
1st Upper Sidelobe Suppression (dB) ≥16 ≥16 ≥16 ≥17 ≥18
Upper Sidelobe Suppression, Peak to 20° (dB) ≥16 ≥15 ≥15 ≥17 ≥16
Front-To-Back Ratio, 180°30° (dB) ≥25 ≥26 ≥27 ≥26 ≥26
Cross-polar Discrimination@0° (dB) ≥18 ≥17 ≥17 ≥18 ≥18
Cross-polar Discrimination over Sector (dB) ≥10 ≥10 ≥11 ≥10 ≥7
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 128
DS-Control:0-0-4 / 1216
Outdoor Directional Quad-band Antenna
ODI2-065R16M18J-GQ
 XXXX Pol, 65°Horizontal Beamwidth
 694-960/694-960/1710-2690/1710-2690MHz
 15.5/15.5/17.5/17.5dBi, E-Tilt: 0-10/0-10/0-10/0-10
 Integrated RCU

Connector Position Configuration Types

445

130

Connector Labeling***
Connect Code Frequency range Array
R1 694-960 l
R2 694-960 r
Y1 1710-2690 l
Y2 1710-2690 r
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
00-ZJ10(12) (three mounting points) 1 Mounting Kit, 0-12°tilt.
iRCU-502 1 Integrated RET Controller

Optional Products (order separately)

Model Quantity Description
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 129
DS-Control:0-0-4 / 1216
Outdoor Directional Quad-band Antenna
ODI2-065R17M18J-GQ
 XXXX Pol, 65°Horizontal Beamwidth
 694-960/694-960/1710-2690/1710-2690MHz
 16.5/16.5/17.4/17.4dBi, E-Tilt: 0-10/0-10/0-10/0-10
 Integrated RCU

Electrical Specifications
R1 694-960, R2 694-960
Frequency Range (MHz)
694-824 790-894 880-960
Polarization ±45°
Gain (dBi) 15.4 15.9 16.5
Horizontal Beamwidth (°) 65 63 58
Vertical Beamwidth (°) 9.0 7.5 7.0
Electrical Downtilt (°) 0-10 / 0-10
1st Upper Sidelobe Suppression (dB) ≥17(0°), ≥16(5°), ≥15(10°)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0°(dB) ≥17
Isolation Intra-system (dB) ≥27
≥27(694-960/694-960)
Isolation Inter-system (dB)
≥30(694-960/1710-2690)
Maximum Power per Port (W) 500

Y1 1710-2690, Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Polarization ±45°
Gain (dBi) 16.7 17.0 17.3 17.4 17.4
Horizontal Beamwidth (°) 65 64 61 60 59
Vertical Beamwidth (°) 6.4 5.9 5.3 4.8 4.5
Electrical Downtilt (°) 0-10 / 0-10
1st Upper Sidelobe Suppression (dB) ≥15(0°), ≥15(5°), ≥14(10°)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0°(dB) ≥17
Isolation Intra-system (dB) ≥28
Isolation Inter-system (dB) ≥30
Maximum Power per Port (W) 250

VSWR ≤1.5:1
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Impedance (Ω) 50
Lightning Protection Direct Ground

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 130
DS-Control:0-0-4 / 1116
Outdoor Directional Quad-band Antenna
ODI2-065R17M18J-GQ
 XXXX Pol, 65°Horizontal Beamwidth
 694-960/694-960/1710-2690/1710-2690MHz
 16.5/16.5/17.4/17.4dBi, E-Tilt: 0-10/0-10/0-10/0-10
 Integrated RCU

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 2780x445x130 / 109.4x17.5x5.1
Shipping Dimensions, HxWxD(mm) / (in) 3095x570x285 / 121.9x22.4x11.2
Net Weight, Antenna (kg) / (Ib) 43.5 / 95.9
Net Weight, Mounting Kit (kg) / (Ib) 9.4 / 20.7
Shipping Weight (kg) / (Ib) 67.9 / 149.7
Connector Type 8 x 4.3-10 Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -40 to +60
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
1906 / 200 / 2441
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

RET Specifications
Protocol to CCU/TMA 3GPP / AISG 2.0
Input Voltage Range(V) +10 to +30 DC
Power Consumption(W) ≤2(stand by); ≤13(operating)
Connectors to CCU 8 pin connector, Male, conform to AISG 2.0
Connectors to RCU 8 pin connector, Female, conform to AISG 2.0
Dimensions, HxWxD (mm) / (in)
116x53x26 / 4.6x2.1x1.0
(excluding connector)
Weight, w/o Mounting Kit (kg) / (lb) 0.2 / 0.4

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 131
DS-Control:0-0-4 / 1116
Outdoor Directional Quad-band Antenna
ODI2-065R17M18J-GQ
 XXXX Pol, 65°Horizontal Beamwidth
 694-960/694-960/1710-2690/1710-2690MHz
 16.5/16.5/17.4/17.4dBi, E-Tilt: 0-10/0-10/0-10/0-10
 Integrated RCU

Electrical Specifications BASTA Standard**

R1 694-960, R2 694-960
Frequency Range (MHz)
694-824 790-894 880-960
Over All Tilts 15.2±0.8 15.7±0.6 16.3±0.5
Min Tilt 15.4 15.9 16.5
Gain (dBi)
Mid Tilt 15.2 15.7 16.2
Max Tilt 15.0 15.5 16.0
Horizontal Beamwidth (°) 65±8 63±6 58±5
Vertical Beamwidth (°) 9.0±1.5 7.5±1.0 7.0±1.0
Electrical Downtilt Deviation(°) ≤1.0 ≤1.0 ≤1.0
1st Upper Sidelobe Suppression (dB) ≥17 ≥17 ≥18
Upper Sidelobe Suppression, Peak to 20°
≥18 ≥19 ≥18
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥25 ≥25 ≥26
Cross-polar Discrimination@0°(dB) ≥19 ≥22 ≥22
Cross-polar Discrimination over Sector(dB) ≥8 ≥9 ≥9

Y1 1710-2690,Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Over All Tilts 16.6±0.5 16.9±0.5 17.2±0.6 17.3±0.5 17.2±0.5
Min Tilt 16.7 17.0 17.3 17.4 17.4
Gain (dBi)
Mid Tilt 16.6 16.9 17.3 17.2 17.1
Max Tilt 16.5 16.8 17.0 17.1 16.9
Horizontal Beamwidth (°) 65±5 64±5 61±5 60±5 59±5
Vertical Beamwidth (°) 6.4±0.8 5.9±0.8 5.3±0.8 4.8±0.6 4.5±0.6
Electrical Downtilt Deviation(°) ≤1.0 ≤1.0 ≤1.0 ≤1.0 ≤1.0
1st Upper Sidelobe Suppression (dB) ≥18 ≥18 ≥17 ≥19 ≥17
Upper Sidelobe Suppression, Peak to 20°
≥16 ≥16 ≥17 ≥16 ≥16
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥26 ≥27 ≥28 ≥27 ≥26
Cross-polar Discrimination@0°(dB) ≥18 ≥18 ≥20 ≥18 ≥19
Cross-polar Discrimination over Sector(dB) ≥12 ≥12 ≥12 ≥10 ≥9
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 132
DS-Control:0-0-4 / 1116
Outdoor Directional Quad-band Antenna
ODI2-065R17M18J-GQ
 XXXX Pol, 65°Horizontal Beamwidth
 694-960/694-960/1710-2690/1710-2690MHz
 16.5/16.5/17.4/17.4dBi, E-Tilt: 0-10/0-10/0-10/0-10
 Integrated RCU

Connector Position Configuration Types

445

130

Connector Labeling***
Connect Code Frequency range Array
R1 694-960 l
R2 694-960 r
Y1 1710-2690 l
Y2 1710-2690 r
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
00-ZJ10(08)(three mounting points) 1 Mounting Kit, 0-8°tilt.
iRCU-502 1 Integrated RET Controller

Optional Products (order separately)

Model Quantity Description
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 133
DS-Control:0-0-4 / 1116
Outdoor Directional Quad-band Antenna
ODI-065R12M15JJJ02-GQ
 XXXX Pol, 65°Horizontal Beamwidth
 694-960/1710-2690/1710-2690/1710-2690MHz
 12.7/15.3/14.3/15.3dBi, E-Tilt: 2-16/2-12/2-12/2-12
 Integrated RCU

Electrical Specifications
R1 694-960
Frequency Range (MHz)
694-824 790-894 880-960
Polarization ±45°
Gain (dBi) 11.6 12.5 12.7
Horizontal Beamwidth (°) 63 59 60
Vertical Beamwidth (°) 29.0 26.0 24.0
Electrical Downtilt (°) 2-16
1st Upper Sidelobe Suppression (dB) ≥15(2°), ≥14(9°), ≥13(16°)
Front-To-Back Ratio, 180°30° (dB) ≥23
Cross-polar Discrimination@0° (dB) ≥17(typ.)
Maximum Power per Port (W) 500

Y1 1710-2690, Y3 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Polarization ±45°
Gain (dBi) 13.9 14.3 14.6 15.0 15.3
Horizontal Beamwidth (°) 70 67 63 62 58
Vertical Beamwidth (°) 12.6 12.0 10.8 9.3 8.9
Electrical Downtilt (°) 2-12 / 2-12
1st Upper Sidelobe Suppression (dB) ≥15(2°), ≥14(7°), ≥13(12°)
Front-To-Back Ratio, 180°30° (dB) ≥23
Cross-polar Discrimination@0° (dB) ≥18
Maximum Power per Port (W) 250

Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Polarization ±45°
Gain (dBi) 13.8 14.0 14.3 14.1 14.0
Horizontal Beamwidth (°) 64 64 60 61 61
Vertical Beamwidth (°) 13.2 12.6 11.9 11.1 10.4
Electrical Downtilt (°) 2-12
1st Upper Sidelobe Suppression (dB) ≥15(2°), ≥14(7°), ≥13(12°)
Front-To-Back Ratio, 180°30° (dB) ≥23
Cross-polar Discrimination@0° (dB) ≥17(typ.)
Maximum Power per Port (W) 250

VSWR ≤1.5:1
Isolation Intra-system (dB) ≥25
Isolation Inter-system (dB) ≥30
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Impedance (Ω) 50
Lightning Protection Direct Ground

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 134
DS-Control:0-0-3 / 1216
Outdoor Directional Quad-band Antenna
ODI-065R12M15JJJ02-GQ
 XXXX Pol, 65°Horizontal Beamwidth
 694-960/1710-2690/1710-2690/1710-2690MHz
 12.7/15.3/14.3/15.3dBi, E-Tilt: 2-16/2-12/2-12/2-12
 Integrated RCU

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 800x380x138 / 31.5x15.0x5.4
Shipping Dimensions, HxWxD(mm) / (in) 1090X490x270 / 42.9x19.3x10.6
Net Weight, Antenna (kg) / (Ib) 16.5 / 36.4
Net Weight, Mounting Kit (kg) / (Ib) 2.8 / 6.2
Shipping Weight (kg) / (Ib) 19.3 / 42.5
Connector Type 8 x 4.3-10 Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -40 to +60
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
326 / 64 / 388
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

RET Specifications
Protocol to CCU/TMA 3GPP / AISG 2.0
Input Voltage Range (V) +10 to +30 DC
Power Consumption (W) ≤2(stand by); ≤13(operating)
Connectors to CCU 8 pin connector, Male, conform to AISG 2.0
Connectors to RCU 8 pin connector, Female, conform to AISG 2.0
Dimensions, HxWxD (mm) / (in)
116x53x26 / 4.6x2.1x1.0
(excluding connector)
Weight, w/o Mounting Kit (kg) / (lb) 0.2 / 0.4

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 135
DS-Control:0-0-3 / 1216
Outdoor Directional Quad-band Antenna
ODI-065R12M15JJJ02-GQ
 XXXX Pol, 65°Horizontal Beamwidth
 694-960/1710-2690/1710-2690/1710-2690MHz
 12.7/15.3/14.3/15.3dBi, E-Tilt: 2-16/2-12/2-12/2-12
 Integrated RCU

Electrical Specifications BASTA Standard**

R1 694-960
Frequency Range (MHz)
694-824 790-894 880-960
Over All Tilts 11.4±0.4 12.4±0.8 12.6±0.5
Min Tilt 11.6 12.5 12.7
Gain (dBi)
Mid Tilt 11.4 12.3 12.6
Max Tilt 11.3 12.3 12.5
Horizontal Beamwidth (°) 63±4 59±2 60±3
Vertical Beamwidth (°) 29.0±2.4 26.0±3.0 24.0±1.9
Electrical Downtilt Deviation (°) ≤1.0 ≤1.0 ≤0.9
1st Upper Sidelobe Suppression (dB) ≥14 ≥15 ≥14
Upper Sidelobe Suppression, Peak to 20° (dB) ≥16 ≥18 ≥18
Front-To-Back Ratio, 180°30° (dB) ≥23 ≥23 ≥22
Cross-polar Discrimination@0° (dB) ≥27 ≥22 ≥19
Cross-polar Discrimination over Sector (dB) ≥7 ≥7 ≥9

Y1 1710-2690, Y3 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Over All Tilts 13.8±0.5 14.1±0.4 14.4±0.7 14.8±0.5 15.0±0.4
Min Tilt 13.9 14.3 14.6 15.0 15.3
Gain (dBi)
Mid Tilt 13.8 14.1 14.4 14.8 15.0
Max Tilt 13.7 14.0 14.2 14.6 14.8
Horizontal Beamwidth (°) 70±6 67±4 63±6 62±5 58±5
Vertical Beamwidth (°) 12.6±0.7 12.0±1.0 10.8±1.0 9.3±0.6 8.9±0.6
Electrical Downtilt Deviation (°) ≤1.0 ≤1.0 ≤1.0 ≤1.0 ≤1.0
1st Upper Sidelobe Suppression (dB) ≥20 ≥19 ≥18 ≥17 ≥17
Upper Sidelobe Suppression, Peak to 20° (dB) ≥20 ≥19 ≥18 ≥16 ≥16
Front-To-Back Ratio, 180°30° (dB) ≥22 ≥24 ≥23 ≥23 ≥22
Cross-polar Discrimination@0° (dB) ≥22 ≥23 ≥23 ≥23 ≥22
Cross-polar Discrimination over Sector (dB) ≥11 ≥9 ≥7 ≥6 ≥6

Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Over All Tilts 13.7±0.5 13.9±0.3 14.1±0.6 13.9±0.8 13.8±0.7
Min Tilt 13.8 14.0 14.3 14.1 14.0
Gain (dBi)
Mid Tilt 13.7 13.9 14.0 13.9 13.9
Max Tilt 13.5 13.7 13.9 13.7 13.6
Horizontal Beamwidth (°) 64±5 64±4 60±6 61±5 61±7
Vertical Beamwidth (°) 13.2±1.1 12.6±1.0 11.9±1.2 11.1±1.2 10.4±1.2
Electrical Downtilt Deviation (°) ≤0.8 ≤1.0 ≤1.0 ≤1.0 ≤1.0
1st Upper Sidelobe Suppression (dB) ≥15 ≥16 ≥15 ≥14 ≥14
Upper Sidelobe Suppression, Peak to 20° (dB) ≥14 ≥16 ≥15 ≥14 ≥14
Front-To-Back Ratio, 180°30° (dB) ≥22 ≥23 ≥23 ≥24 ≥24
Cross-polar Discrimination@0° (dB) ≥17 ≥17 ≥19 ≥17 ≥17
Cross-polar Discrimination over Sector (dB) ≥6 ≥7 ≥7 ≥6 ≥6
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 136
DS-Control:0-0-3 / 1216
Outdoor Directional Quad-band Antenna
ODI-065R12M15JJJ02-GQ
 XXXX Pol, 65°Horizontal Beamwidth
 694-960/1710-2690/1710-2690/1710-2690MHz
 12.7/15.3/14.3/15.3dBi, E-Tilt: 2-16/2-12/2-12/2-12
 Integrated RCU

Connector Position Configuration Types

380

138

Connector Labeling***
Connect Code Frequency range Array
R1 694-960 /
Y1 1710-2690 l
Y2 1710-2690 c
Y3 1710-2690 r
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
00-ZJ15A(25) 1 Mounting Kit, 0-25°tilt.
iRCU-502 1 Integrated RET Controller

Optional Products (order separately)

Model Quantity Description
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 137
DS-Control:0-0-3 / 1216
Outdoor Directional Quad-band Antenna
ODI-065R15M18JJJ02-G
 XXXX Pol, 65°Horizontal Beamwidth
 694-960/1710-2690/1710-2690/1710-2690MHz
 14.5/17.7/17.5/17.7dBi, E-Tilt: 2-16/2-12/2-12/2-12
 Integrated RCU

Electrical Specifications
R1 694-960
Frequency Range (MHz)
694-824 790-894 880-960
Polarization ±45°
Gain (dBi) 13.9 14.3 14.5
Horizontal Beamwidth (°) 65 64 64
Vertical Beamwidth (°) 17.3 15.4 14.3
Electrical Downtilt (°) 2-16
1st Upper Sidelobe Suppression (dB) ≥16(2°), ≥15(9°), ≥14(16°)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥17(typ.)
Maximum Power per Port (W) 500

Y1 1710-2690, Y3 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2490-2690
Polarization ±45°
Gain (dBi) 16.7 16.9 17.3 17.7
Horizontal Beamwidth (°) 69 68 66 62
Vertical Beamwidth (°) 7.2 6.8 6.2 4.8
Electrical Downtilt (°) 2-12 / 2-12
1st Upper Sidelobe Suppression (dB) ≥15(2°), ≥15(7°), ≥14(12°)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥17
Maximum Power per Port (W) 250

Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2490-2690
Polarization ±45°
Gain (dBi) 16.6 16.8 17.2 17.5
Horizontal Beamwidth (°) 68 66 63 59
Vertical Beamwidth (°) 6.6 6.2 5.7 4.5
Electrical Downtilt (°) 2-12
1st Upper Sidelobe Suppression (dB) ≥15(2°), ≥15(7°), ≥14(12°)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥17
Maximum Power per Port (W) 250

VSWR ≤1.5:1
Isolation Intra-system (dB) ≥28
Isolation Inter-system (dB) ≥30
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Impedance (Ω) 50
Lightning Protection Direct Ground

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 138
DS-Control:2-0-0 / 1216
Outdoor Directional Quad-band Antenna
ODI-065R15M18JJJ02-G
 XXXX Pol, 65°Horizontal Beamwidth
 694-960/1710-2690/1710-2690/1710-2690MHz
 14.5/17.7/17.5/17.7dBi, E-Tilt: 2-16/2-12/2-12/2-12
 Integrated RCU

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 1500x380x138 / 59.1x15.0x5.4
Shipping Dimensions, HxWxD(mm) / (in) 1815x490x270 / 71.5x19.3x10.6
Net Weight, Antenna (kg) / (Ib) 26.0 / 57.3
Net Weight, Mounting Kit (kg) / (Ib) 5.9 / 13.0
Shipping Weight (kg) / (Ib) 38.9 / 85.8
Connector Type 8 x 7/16 DIN Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -40 to +60
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
694 / 126 / 824
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

RET Specifications
Protocol to CCU/TMA 3GPP / AISG 2.0
Input Voltage Range (V) +10 to +30 DC
Power Consumption (W) ≤2(stand by); ≤13(operating)
Connectors to CCU 8 pin connector, Male, conform to AISG 2.0
Connectors to RCU 8 pin connector, Female, conform to AISG 2.0
Dimensions, HxWxD (mm) / (in)
116x53x26 / 4.6x2.1x1.0
(excluding connector)
Weight, w/o Mounting Kit (kg) / (lb) 0.2 / 0.4

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 139
DS-Control:2-0-0 / 1216
Outdoor Directional Quad-band Antenna
ODI-065R15M18JJJ02-G
 XXXX Pol, 65°Horizontal Beamwidth
 694-960/1710-2690/1710-2690/1710-2690MHz
 14.5/17.7/17.5/17.7dBi, E-Tilt: 2-16/2-12/2-12/2-12
 Integrated RCU

Electrical Specifications BASTA Standard**

R1 694-960
Frequency Range (MHz)
694-824 790-894 880-960
Over All Tilts 13.8±0.4 14.2±0.4 14.5±0.4
Min Tilt 13.9 14.3 14.5
Gain (dBi)
Mid Tilt 14.0 14.4 14.6
Max Tilt 13.6 14.1 14.4
Horizontal Beamwidth (°) 65±3 64±3 64±3
Vertical Beamwidth (°) 17.3±1.7 15.4±1.2 14.3±1.0
Electrical Downtilt Deviation (°) ≤0.9 ≤0.9 ≤1.0
1st Upper Sidelobe Suppression (dB) ≥16 ≥17 ≥17
Upper Sidelobe Suppression, Peak to 20° (dB) ≥16 ≥17 ≥17
Front-To-Back Ratio, 180°30° (dB) ≥25 ≥26 ≥24
Cross-polar Discrimination@0° (dB) ≥23 ≥21 ≥19
Cross-polar Discrimination over Sector (dB) ≥8 ≥9 ≥8

Y1 1710-2690, Y3 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2490-2690
Over All Tilts 16.3±0.5 16.7±0.4 17.2±0.6 17.4±0.6
Min Tilt 16.7 16.9 17.3 17.7
Gain (dBi)
Mid Tilt 16.5 16.8 17.4 17.5
Max Tilt 16.1 16.5 16.9 16.8
Horizontal Beamwidth (°) 69±6 68±6 66±5 62±6
Vertical Beamwidth (°) 7.2±0.6 6.8±0.6 6.2±0.6 4.8±0.3
Electrical Downtilt Deviation (°) ≤0.6 ≤0.6 ≤0.7 ≤0.7
1st Upper Sidelobe Suppression (dB) ≥16 ≥17 ≥17 ≥17
Upper Sidelobe Suppression, Peak to 20° (dB) ≥16 ≥15 ≥17 ≥17
Front-To-Back Ratio, 180°30° (dB) ≥24 ≥25 ≥24 ≥23
Cross-polar Discrimination@0° (dB) ≥22 ≥21 ≥19 ≥19
Cross-polar Discrimination over Sector (dB) ≥11 ≥10 ≥8 ≥5

Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2490-2690
Over All Tilts 16.2±1.0 16.6±0.7 16.9±0.9 17.3±0.7
Min Tilt 16.6 16.8 17.2 17.5
Gain (dBi)
Mid Tilt 16.2 16.5 16.9 17.4
Max Tilt 15.8 16.4 16.5 17.0
Horizontal Beamwidth (°) 68±6 66±6 63±7 59±7
Vertical Beamwidth (°) 6.6±0.5 6.2±0.4 5.7±0.5 4.5±0.3
Electrical Downtilt Deviation (°) ≤1.0 ≤0.9 ≤1.0 ≤1.0
1st Upper Sidelobe Suppression (dB) ≥19 ≥17 ≥18 ≥16
Upper Sidelobe Suppression, Peak to 20° (dB) ≥18 ≥19 ≥19 ≥17
Front-To-Back Ratio, 180°30° (dB) ≥25 ≥25 ≥26 ≥26
Cross-polar Discrimination@0° (dB) ≥18 ≥20 ≥20 ≥18
Cross-polar Discrimination over Sector (dB) ≥9 ≥9 ≥8 ≥5
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 140
DS-Control:2-0-0 / 1216
Outdoor Directional Quad-band Antenna
ODI-065R15M18JJJ02-G
 XXXX Pol, 65°Horizontal Beamwidth
 694-960/1710-2690/1710-2690/1710-2690MHz
 14.5/17.7/17.5/17.7dBi, E-Tilt: 2-16/2-12/2-12/2-12
 Integrated RCU

Connector Position Configuration Types

380

138

Connector Labeling***
Connect Code Frequency range Array
R1 694-960 c
Y1 1710-2690 r
Y2 1710-2690 c
Y3 1710-2690 l
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
00-ZJ10(13) 1 Mounting Kit, 0-13°tilt.
iRCU-502 1 Integrated RET Controller

Optional Products (order separately)

Model Quantity Description
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 141
DS-Control:2-0-0 / 1216
Outdoor Directional Quad-band Antenna
ODI-065R16M17JJJ-G
 XXXX Pol, 65°Horizontal Beamwidth
 694-960/1710-2690/1710-2690/1710-2690MHz
 16.0/17.1/16.4/17.1dBi, E-Tilt: 0-10/0-10/0-10/0-10
 Integrated RCU

Electrical Specifications
R1 694-960
Frequency Range (MHz)
694-824 790-894 880-960
Polarization ±45°
Gain (dBi) 15.2 15.8 16.0
Horizontal Beamwidth (°) 68 65 63
Vertical Beamwidth (°) 10.9 9.9 9.0
Electrical Downtilt (°) 0-10
1st Upper Sidelobe Suppression (dB) ≥16(0°), ≥15(5°), ≥14(10°)
Upper Sidelobe Suppression, Peak to 20° (dB) ≥16(0°), ≥15(5°), ≥14(10°)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥18(typ.)
Maximum Power per Port (W) 500

Y1 1710-2690, Y3 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Polarization ±45°
Gain (dBi) 15.7 16.1 16.4 16.5 17.1
Horizontal Beamwidth (°) 67 66 64 63 64
Vertical Beamwidth (°) 9.4 8.8 8.2 6.9 6.3
Electrical Downtilt (°) 0-10 / 0-10
1st Upper Sidelobe Suppression (dB) ≥16(0°), ≥15(5°), ≥14(10°)
Upper Sidelobe Suppression, Peak to 20° (dB) ≥15(0°), ≥15(5°), ≥14(10°)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥18(typ.)
Maximum Power per Port (W) 250

Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Polarization ±45°
Gain (dBi) 15.4 15.7 16.1 16.1 16.4
Horizontal Beamwidth (°) 69 65 63 65 66
Vertical Beamwidth (°) 9.4 8.8 8.2 7.0 6.3
Electrical Downtilt (°) 0-10
1st Upper Sidelobe Suppression (dB) ≥16(0°), ≥15(5°), ≥14(10°)
Upper Sidelobe Suppression, Peak to 20° (dB) ≥15(0°), ≥15(5°), ≥14(10°)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥18(typ.)
Maximum Power per Port (W) 250

VSWR ≤1.5:1
Isolation Intra-system (dB) ≥28
Isolation Inter-system (dB) ≥30
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Impedance (Ω) 50
Lightning Protection Direct Ground

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 142
DS-Control:2-0-0 / 1216
Outdoor Directional Quad-band Antenna
ODI-065R16M17JJJ-G
 XXXX Pol, 65°Horizontal Beamwidth
 694-960/1710-2690/1710-2690/1710-2690MHz
 16.0/17.1/16.4/17.1dBi, E-Tilt: 0-10/0-10/0-10/0-10
 Integrated RCU

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 2000x380x138 / 78.7x15.0x5.4
Shipping Dimensions, HxWxD (mm) / (in) 2340x490x270 / 92.1x19.3x10.6
Net Weight, Antenna (kg) / (Ib) 27.1 / 59.7
Net Weight, Mounting Kit (kg) / (Ib) 5.9 / 13.0
Shipping Weight (kg) / (Ib) 41.3 / 91.1
Connector Type 8 x 7/16 DIN-Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -40 to +60
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
1000 / 171 / 1190
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

RET Specifications
Protocol to CCU/TMA 3GPP / AISG 2.0
Input Voltage Range (V) +10 to +30 DC
Power Consumption (W) ≤2(stand by); ≤13(operating)
Connectors to CCU 8 pin connector, Male, conform to AISG 2.0
Connectors to RCU 8 pin connector, Female, conform to AISG 2.0
Dimensions, HxWxD (mm) / (in)
116x53x26 / 4.6x2.1x1.0
(excluding connector)
Weight, w/o Mounting Kit (kg) / (lb) 0.2 / 0.4

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 143
DS-Control:2-0-0 / 1216
Outdoor Directional Quad-band Antenna
ODI-065R16M17JJJ-G
 XXXX Pol, 65°Horizontal Beamwidth
 694-960/1710-2690/1710-2690/1710-2690MHz
 16.0/17.1/16.4/17.1dBi, E-Tilt: 0-10/0-10/0-10/0-10
 Integrated RCU

Electrical Specifications BASTA Standard**

R1 694-960
Frequency Range (MHz)
694-824 790-894 880-960
Over All Tilts 15.1±0.4 15.7±0.4 15.7±0.4
Min Tilt 15.2 15.8 16.0
Gain (dBi)
Mid Tilt 15.1 15.8 15.8
Max Tilt 15.0 15.6 15.4
Horizontal Beamwidth (°) 68±3 65±2 63±2
Vertical Beamwidth (°) 10.9±0.7 9.9±0.8 9.0±0.2
Electrical Downtilt Deviation (°) ≤0.6 ≤0.4 ≤0.4
1st Upper Sidelobe Suppression (dB) ≥20 ≥18 ≥17
Upper Sidelobe Suppression, Peak to 20° (dB) ≥20 ≥18 ≥17
Front-To-Back Ratio, 180°30° (dB) ≥26 ≥27 ≥26
Cross-polar Discrimination@0° (dB) ≥25 ≥25 ≥26
Cross-polar Discrimination over Sector (dB) ≥10 ≥10 ≥9

Y1 1710-2690, Y3 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Over All Tilts 15.6±1.0 16.0±0.8 16.4±1.0 16.4±1.0 16.9±1.3
Min Tilt 15.7 16.1 16.4 16.5 17.1
Gain (dBi)
Mid Tilt 15.5 16.0 16.4 16.6 16.9
Max Tilt 15.7 16.0 16.3 16.0 16.5
Horizontal Beamwidth (°) 67±5 66±5 64±4 63±5 64±5
Vertical Beamwidth (°) 9.4±0.5 8.8±0.4 8.2±0.9 6.9±0.4 6.3±0.4
Electrical Downtilt Deviation (°) ≤0.5 ≤0.7 ≤0.7 ≤0.8 ≤0.7
1st Upper Sidelobe Suppression (dB) ≥18 ≥19 ≥19 ≥19 ≥17
Upper Sidelobe Suppression, Peak to 20° (dB) ≥18 ≥18 ≥15 ≥12 ≥13
Front-To-Back Ratio, 180°30° (dB) ≥24 ≥25 ≥25 ≥24 ≥24
Cross-polar Discrimination@0° (dB) ≥26 ≥26 ≥26 ≥23 ≥21
Cross-polar Discrimination over Sector (dB) ≥13 ≥13 ≥10 ≥8 ≥7

Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Over All Tilts 15.3±0.8 15.7±0.6 16.1±0.8 16.1±0.8 16.3±0.9
Min Tilt 15.4 15.7 16.1 16.1 16.4
Gain (dBi)
Mid Tilt 15.2 15.8 16.2 16.3 16.3
Max Tilt 15.2 15.6 16.0 15.9 16.2
Horizontal Beamwidth (°) 69±5 65±4 63±3 65±3 66±4
Vertical Beamwidth (°) 9.4±0.5 8.8±0.4 8.2±0.9 7.0±0.4 6.3±0.4
Electrical Downtilt Deviation (°) ≤1.0 ≤1.4 ≤1.3 ≤1.1 ≤1.1
1st Upper Sidelobe Suppression (dB) ≥16 ≥18 ≥19 ≥18 ≥16
Upper Sidelobe Suppression, Peak to 20° (dB) ≥16 ≥18 ≥16 ≥13 ≥13
Front-To-Back Ratio, 180°30° (dB) ≥24 ≥25 ≥25 ≥24 ≥24
Cross-polar Discrimination@0° (dB) ≥27 ≥29 ≥28 ≥25 ≥22
Cross-polar Discrimination over Sector (dB) ≥13 ≥11 ≥10 ≥7 ≥8
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 144
DS-Control:2-0-0 / 1216
Outdoor Directional Quad-band Antenna
ODI-065R16M17JJJ-G
 XXXX Pol, 65°Horizontal Beamwidth
 694-960/1710-2690/1710-2690/1710-2690MHz
 16.0/17.1/16.4/17.1dBi, E-Tilt: 0-10/0-10/0-10/0-10
 Integrated RCU

Connector Position Configuration Types

380

Y2

R1
138

Y3 Y1

Connector Labeling***
Connect Code Frequency range Array
R1 694-960 c
Y1 1710-2690 br
Y2 1710-2690 tl
Y3 1710-2690 bl
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
00-ZJ10(08) 1 Mounting Kit, 0-8°tilt.
iRCU-502 1 Integrated RET Controller

Optional Products (order separately)

Model Quantity Description
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 145
DS-Control:2-0-0 / 1216
Outdoor Directional Quad-band Antenna
ODV-065R17M18JJJ-G
 XXXX Pol, 65°Horizontal Beamwidth
 698-960/1710-2690/1710-2690/1710-2690MHz
 16.7/18.0/17.5/18.0dBi, E-Tilt: 0-10/0-10/0-10/0-10

Electrical Specifications
R1 698-960
Frequency Range (MHz)
698-824 790-894 880-960
Polarization ±45°
Gain (dBi) 16.0 16.6 16.7
Horizontal Beamwidth (°) 68 66 68
Vertical Beamwidth (°) 8.7 7.7 7.1
Electrical Downtilt (°) 0-10
1st Upper Sidelobe Suppression (dB) ≥17(0°), ≥16(5°), ≥15(10°)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥17(typ.)
Maximum Power per Port (W) 500

Y1 1710-2690, Y3 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Polarization ±45°
Gain (dBi) 16.8 17.1 17.2 17.5 18.0
Horizontal Beamwidth (°) 62 62 62 62 61
Vertical Beamwidth (°) 7.5 6.9 6.5 5.5 5.1
Electrical Downtilt (°) 0-10 / 0-10
1st Upper Sidelobe Suppression (dB) ≥16(0°), ≥15(5°), ≥14(10°)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥17(typ.)
Maximum Power per Port (W) 250

Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Polarization ±45°
Gain (dBi) 16.2 16.5 16.7 17.0 17.5
Horizontal Beamwidth (°) 63 62 61 63 64
Vertical Beamwidth (°) 7.6 7.0 6.6 5.5 5.1
Electrical Downtilt (°) 0-10
1st Upper Sidelobe Suppression (dB) ≥16(0°), ≥15(5°), ≥14(10°)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥17(typ.)
Maximum Power per Port (W) 250

VSWR ≤1.5:1
Isolation Intra-system (dB) ≥28
Isolation Inter-system (dB) ≥30
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Impedance (Ω) 50
Lightning Protection Direct Ground

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 146
DS-Control:3-0-0 / 1216
Outdoor Directional Quad-band Antenna
ODV-065R17M18JJJ-G
 XXXX Pol, 65°Horizontal Beamwidth
 698-960/1710-2690/1710-2690/1710-2690MHz
 16.7/18.0/17.5/18.0dBi, E-Tilt: 0-10/0-10/0-10/0-10

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 2680x380x138 / 105.5x15.0x5.4
Shipping Dimensions, HxWxD(mm) / (in) 2995x490x270 / 117.9x19.3x10.6
Net Weight, Antenna (kg) / (Ib) 34.8 / 76.7
Net Weight, Mounting Kit (kg) / (Ib) 9.4 / 20.7
Shipping Weight (kg) / (Ib) 54.1 / 119.3
Connector Type 8 x 7/16 DIN-Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -50 to +70
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
1453 / 234 / 1745
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 147
DS-Control:3-0-0 / 1216
Outdoor Directional Quad-band Antenna
ODV-065R17M18JJJ-G
 XXXX Pol, 65°Horizontal Beamwidth
 698-960/1710-2690/1710-2690/1710-2690MHz
 16.7/18.0/17.5/18.0dBi, E-Tilt: 0-10/0-10/0-10/0-10

Electrical Specifications BASTA Standard**

R1 698-960
Frequency Range (MHz)
698-824 790-894 880-960
Over All Tilts 15.9±0.6 16.3±0.4 16.4±0.4
Min Tilt 16.0 16.6 16.7
Gain (dBi)
Mid Tilt 16.0 16.5 16.5
Max Tilt 15.8 15.9 15.9
Horizontal Beamwidth (°) 68±2 66±2 68±3
Vertical Beamwidth (°) 8.7±0.8 7.7±0.5 7.1±0.4
Electrical Downtilt Deviation (°) ≤0.4 ≤0.5 ≤0.6
1st Upper Sidelobe Suppression (dB) ≥18 ≥18 ≥17
Upper Sidelobe Suppression, Peak to 20°
≥18 ≥18 ≥17
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥26 ≥28 ≥26
Cross-polar Discrimination@0° (dB) ≥21 ≥23 ≥21
Cross-polar Discrimination over Sector (dB) ≥12 ≥11 ≥10

Y1 1710-2690, Y3 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Over All Tilts 16.8±0.4 17.1±0.4 17.2±0.5 17.3±0.8 17.7±0.8
Min Tilt 16.8 17.1 17.2 17.5 18.0
Gain (dBi)
Mid Tilt 16.9 17.3 17.4 17.4 18.0
Max Tilt 16.7 17.0 17.0 16.9 17.2
Horizontal Beamwidth (°) 62±4 62±3 62±4 62±4 61±5
Vertical Beamwidth (°) 7.5±0.5 6.9±0.6 6.5±0.6 5.5±0.5 5.1±0.6
Electrical Downtilt Deviation (°) ≤0.5 ≤0.6 ≤0.5 ≤0.4 ≤0.4
1st Upper Sidelobe Suppression (dB) ≥18 ≥19 ≥20 ≥19 ≥19
Upper Sidelobe Suppression, Peak to 20°
≥18 ≥19 ≥19 ≥18 ≥14
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥25 ≥25 ≥24 ≥25 ≥26
Cross-polar Discrimination@0° (dB) ≥26 ≥26 ≥25 ≥24 ≥21
Cross-polar Discrimination over Sector (dB) ≥12 ≥12 ≥8 ≥8 ≥8

Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Over All Tilts 16.0±0.5 16.5±0.4 16.7±0.4 17.0±0.4 17.4±0.3
Min Tilt 16.2 16.5 16.7 17.0 17.5
Gain (dBi)
Mid Tilt 16.3 16.6 16.8 17.0 17.4
Max Tilt 16.0 16.3 16.6 16.9 17.2
Horizontal Beamwidth (°) 63±5 62±4 61±3 63±4 64±3
Vertical Beamwidth (°) 7.6±0.5 7.0±0.4 6.6±0.6 5.5±0.3 5.1±0.3
Electrical Downtilt Deviation (°) ≤1.0 ≤1.1 ≤1.0 ≤1.0 ≤1.0
1st Upper Sidelobe Suppression (dB) ≥19 ≥18 ≥18 ≥15 ≥15
Upper Sidelobe Suppression, Peak to 20°
≥17 ≥17 ≥15 ≥15 ≥13
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥25 ≥25 ≥24 ≥25 ≥26
Cross-polar Discrimination@0° (dB) ≥25 ≥25 ≥24 ≥20 ≥20
Cross-polar Discrimination over Sector (dB) ≥12 ≥11 ≥8 ≥8 ≥9
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 148
DS-Control:3-0-0 / 1216
Outdoor Directional Quad-band Antenna
ODV-065R17M18JJJ-G
 XXXX Pol, 65°Horizontal Beamwidth
 698-960/1710-2690/1710-2690/1710-2690MHz
 16.7/18.0/17.5/18.0dBi, E-Tilt: 0-10/0-10/0-10/0-10

Connector Position Configuration Types

380

Y2

R1
138

Y3 Y1

Connector Labeling***
Connect Code Frequency range Array
R1 698-960 c
Y1 1710-2690 r
Y2 1710-2690 tl
Y3 1710-2690 bl
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
00-ZJ10(08) (three mounting points) 1 Mounting Kit, 0-8°tilt.

Optional Products (order separately)

Model Quantity Description
RCU-003(IV) 4 Remote Control Unit
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 149
DS-Control:3-0-0 / 1216
Outdoor Directional Quad-band Antenna
ODI-065R17M18JJJ-G
 XXXX Pol, 65°Horizontal Beamwidth
 698-960/1710-2690/1710-2690/1710-2690MHz
 16.7/18.0/17.5/18.0dBi, E-Tilt: 0-10/0-10/0-10/0-10
 Integrated RCU

Electrical Specifications
R1 698-960
Frequency Range (MHz)
698-824 790-894 880-960
Polarization ±45°
Gain (dBi) 16.0 16.6 16.7
Horizontal Beamwidth (°) 68 66 68
Vertical Beamwidth (°) 8.7 7.7 7.1
Electrical Downtilt (°) 0-10
1st Upper Sidelobe Suppression (dB) ≥17(0°), ≥16(5°), ≥15(10°)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥17(typ.)
Maximum Power per Port (W) 500

Y1 1710-2690, Y3 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Polarization ±45°
Gain (dBi) 16.8 17.1 17.2 17.5 18.0
Horizontal Beamwidth (°) 62 62 62 62 61
Vertical Beamwidth (°) 7.5 6.9 6.5 5.5 5.1
Electrical Downtilt (°) 0-10 / 0-10
1st Upper Sidelobe Suppression (dB) ≥16(0°), ≥15(5°), ≥14(10°)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥17(typ.)
Maximum Power per Port (W) 250

Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Polarization ±45°
Gain (dBi) 16.2 16.5 16.7 17.0 17.5
Horizontal Beamwidth (°) 63 62 61 63 64
Vertical Beamwidth (°) 7.6 7.0 6.6 5.5 5.1
Electrical Downtilt (°) 0-10
1st Upper Sidelobe Suppression (dB) ≥16(0°), ≥15(5°), ≥14(10°)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥17(typ.)
Maximum Power per Port (W) 250

VSWR ≤1.5:1
Isolation Intra-system (dB) ≥28
Isolation Inter-system (dB) ≥30
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Impedance (Ω) 50
Lightning Protection Direct Ground

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 150
DS-Control:2-0-3 / 1216
Outdoor Directional Quad-band Antenna
ODI-065R17M18JJJ-G
 XXXX Pol, 65°Horizontal Beamwidth
 698-960/1710-2690/1710-2690/1710-2690MHz
 16.7/18.0/17.5/18.0dBi, E-Tilt: 0-10/0-10/0-10/0-10
 Integrated RCU

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 2680x380x138 / 105.5x15.0x5.4
Shipping Dimensions, HxWxD(mm) / (in) 2995x490x270 / 117.9x19.3x10.6
Net Weight, Antenna (kg) / (Ib) 33.8 / 74,5
Net Weight, Mounting Kit (kg) / (Ib) 9.4 / 20.7
Shipping Weight (kg) / (Ib) 53.1 / 117.1
Connector Type 8 x 7/16 DIN-Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -40 to +60
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
1453 / 234 / 1745
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

RET Specifications
Protocol to CCU/TMA 3GPP / AISG 2.0
Input Voltage Range (V) +10 to +30 DC
Power Consumption (W) ≤2(stand by); ≤13(operating)
Connectors to CCU 8 pin connector, Male, conform to AISG 2.0
Connectors to RCU 8 pin connector, Female, conform to AISG 2.0
Dimensions, HxWxD (mm) / (in)
116x53x26 / 4.6x2.1x1.0
(excluding connector)
Weight, w/o Mounting Kit (kg) / (lb) 0.2 / 0.4

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 151
DS-Control:2-0-3 / 1216
Outdoor Directional Quad-band Antenna
ODI-065R17M18JJJ-G
 XXXX Pol, 65°Horizontal Beamwidth
 698-960/1710-2690/1710-2690/1710-2690MHz
 16.7/18.0/17.5/18.0dBi, E-Tilt: 0-10/0-10/0-10/0-10
 Integrated RCU

Electrical Specifications BASTA Standard**

R1 698-960
Frequency Range (MHz)
698-824 790-894 880-960
Over All Tilts 15.9±0.6 16.3±0.4 16.4±0.4
Min Tilt 16.0 16.6 16.7
Gain (dBi)
Mid Tilt 16.0 16.5 16.5
Max Tilt 15.8 15.9 15.9
Horizontal Beamwidth (°) 68±2 66±2 68±3
Vertical Beamwidth (°) 8.7±0.8 7.7±0.5 7.1±0.4
Electrical Downtilt Deviation (°) ≤0.4 ≤0.5 ≤0.6
1st Upper Sidelobe Suppression (dB) ≥18 ≥18 ≥17
Upper Sidelobe Suppression, Peak to 20°
≥18 ≥18 ≥17
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥26 ≥28 ≥26
Cross-polar Discrimination@0° (dB) ≥21 ≥23 ≥21
Cross-polar Discrimination over Sector (dB) ≥12 ≥11 ≥10

Y1 1710-2690, Y3 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Over All Tilts 16.8±0.4 17.1±0.4 17.2±0.5 17.3±0.8 17.7±0.8
Min Tilt 16.8 17.1 17.2 17.5 18.0
Gain (dBi)
Mid Tilt 16.9 17.3 17.4 17.4 18.0
Max Tilt 16.7 17.0 17.0 16.9 17.2
Horizontal Beamwidth (°) 62±4 62±3 62±4 62±4 61±5
Vertical Beamwidth (°) 7.5±0.5 6.9±0.6 6.5±0.6 5.5±0.5 5.1±0.6
Electrical Downtilt Deviation (°) ≤0.5 ≤0.6 ≤0.5 ≤0.4 ≤0.4
1st Upper Sidelobe Suppression (dB) ≥18 ≥19 ≥20 ≥19 ≥19
Upper Sidelobe Suppression, Peak to 20°
≥18 ≥19 ≥19 ≥18 ≥14
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥25 ≥25 ≥24 ≥25 ≥26
Cross-polar Discrimination@0° (dB) ≥26 ≥26 ≥25 ≥24 ≥21
Cross-polar Discrimination over Sector (dB) ≥12 ≥12 ≥8 ≥8 ≥8

Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Over All Tilts 16.0±0.5 16.5±0.4 16.7±0.4 17.0±0.4 17.4±0.3
Min Tilt 16.2 16.5 16.7 17.0 17.5
Gain (dBi)
Mid Tilt 16.3 16.6 16.8 17.0 17.4
Max Tilt 16.0 16.3 16.6 16.9 17.2
Horizontal Beamwidth (°) 63±5 62±4 61±3 63±4 64±3
Vertical Beamwidth (°) 7.6±0.5 7.0±0.4 6.6±0.6 5.5±0.3 5.1±0.3
Electrical Downtilt Deviation(°) ≤1.0 ≤1.1 ≤1.0 ≤1.0 ≤1.0
1st Upper Sidelobe Suppression (dB) ≥19 ≥18 ≥18 ≥15 ≥15
Upper Sidelobe Suppression, Peak to 20°
≥17 ≥17 ≥15 ≥15 ≥13
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥25 ≥25 ≥24 ≥25 ≥26
Cross-polar Discrimination@0°(dB) ≥25 ≥25 ≥24 ≥20 ≥20
Cross-polar Discrimination over Sector(dB) ≥12 ≥11 ≥8 ≥8 ≥9
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 152
DS-Control:2-0-3 / 1216
Outdoor Directional Quad-band Antenna
ODI-065R17M18JJJ-G
 XXXX Pol, 65°Horizontal Beamwidth
 698-960/1710-2690/1710-2690/1710-2690MHz
 16.7/18.0/17.5/18.0dBi, E-Tilt: 0-10/0-10/0-10/0-10
 Integrated RCU

Connector Position Configuration Types

380

Y2

R1
138

Y3 Y1

Connector Labeling***
Connect Code Frequency range Array
R1 698-960 c
Y1 1710-2690 r
Y2 1710-2690 tl
Y3 1710-2690 bl
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
00-ZJ10(08) (three mounting points) 1 Mounting Kit, 0-8°tilt.
iRCU-502 1 Integrated RET Controller

Optional Products (order separately)

Model Quantity Description
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 153
DS-Control:2-0-3 / 1216
Outdoor Directional Penta-band Antenna
ODI-065R15MM18JJJ02-GQ
 XXXXX Pol, 65°Horizontal Beamwidth
 694-960/694-960/1710-2690/1710-2690/1710-2690MHz
 14.5/14.5/17.5/17.5/17.5dBi, E-Tilt: 2-16/2-16/2-12/2-12/2-12
 Integrated RCU

Electrical Specifications
R1 694-960, R2 694-960
Frequency Range (MHz)
694-824 790-894 880-960
Polarization ±45°
Gain (dBi) 13.5 14.1 14.5
Horizontal Beamwidth (°) 63 59 55
Vertical Beamwidth (°) 17.4 15.7 14.2
Electrical Downtilt (°) 2-16 / 2-16
1st Upper Sidelobe Suppression (dB) ≥15(2°), ≥14(9°), ≥14(16°)
Front-To-Back Ratio 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥18(typ.)
Isolation Intra-system (dB) ≥25
≥25(694-960/694-960)
Isolation Inter-system (dB)
≥30(694-960/1710-2690)
Maximum Power per Port (W) 500

Y1 1710-2690, Y3 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Polarization ±45°
Gain (dBi) 16.7 17.0 17.2 17.4 17.5
Horizontal Beamwidth (°) 64 60 60 58 57
Vertical Beamwidth (°) 7.0 6.7 6.0 5.4 4.9
Electrical Downtilt (°) 2-12 / 2-12
1st Upper Sidelobe Suppression (dB) ≥17(2°), ≥16(7°), ≥14(12°)
Front-To-Back Ratio 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥20(typ.)
Isolation Intra-system (dB) ≥28
Isolation Inter-system (dB) ≥30
Maximum Power per Port (W) 250

Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Polarization ±45°
Gain (dBi) 16.6 17.0 17.4 17.4 17.5
Horizontal Beamwidth (°) 61 58 56 62 68
Vertical Beamwidth (°) 7.2 6.6 6.2 5.6 5.0
Electrical Downtilt (°) 2-12
1st Upper Sidelobe Suppression (dB) ≥16(2°), ≥15(7°), ≥14(12°)
Front-To-Back Ratio 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥17(typ.)
Isolation Intra-system (dB) ≥28
Isolation Inter-system (dB) ≥30
Maximum Power per Port (W) 250

VSWR ≤1.5:1
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Impedance (Ω) 50
Lightning Protection Direct Ground

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 154
DS-Control:0-0-2 / 1116
Outdoor Directional Penta-band Antenna
ODI-065R15MM18JJJ02-GQ
 XXXXX Pol, 65°Horizontal Beamwidth
 694-960/694-960/1710-2690/1710-2690/1710-2690MHz
 14.5/14.5/17.5/17.5/17.5dBi, E-Tilt: 2-16/2-16/2-12/2-12/2-12
 Integrated RCU

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 1500x445x165 / 59.1x17.5x6.5
Shipping Dimensions, HxWxD (mm) / (in) 1815x570x320 / 71.5x22.4x12.6
Net Weight, Antenna (kg) / (Ib) 32.0 / 70.5
Net Weight, Mounting Kit (kg) / (Ib) 5.9 / 13.0
Shipping Weight (kg) / (Ib) 46.8 / 103.2
Connector Type 10 x 4.3-10 Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -40 to +60
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
811 / 150 / 963
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

RET Specifications
Protocol to CCU/TMA 3GPP / AISG 2.0
Input Voltage Range (V) +10 to +30 DC
Power Consumption (W) ≤2(stand by); ≤13(operating)
Connectors to CCU 8 pin connector, Male, conform to AISG 2.0
Connectors to RCU 8 pin connector, Female, conform to AISG 2.0
Dimensions, HxWxD (mm) / (in)
116x53x26 / 4.6x2.1x1.0
(Excluding connector)
Weight, w/o Mounting Kit (kg) / (lb) 0.2 / 0.4

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 155
DS-Control:0-0-2 / 1116
Outdoor Directional Penta-band Antenna
ODI-065R15MM18JJJ02-GQ
 XXXXX Pol, 65°Horizontal Beamwidth
 694-960/694-960/1710-2690/1710-2690/1710-2690MHz
 14.5/14.5/17.5/17.5/17.5dBi, E-Tilt: 2-16/2-16/2-12/2-12/2-12
 Integrated RCU

Electrical Specifications BASTA Standard**

R1 694-960, R2 694-960
Frequency Range (MHz)
694-824 790-894 880-960
Over All Tilts 13.3±0.8 13.9±0.5 14.2±0.6
Min Tilt 13.5 14.1 14.5
Gain (dBi)
Mid Tilt 13.3 13.9 14.2
Max Tilt 13.1 13.8 14.0
Horizontal Beamwidth (°) 63±8 59±6 55±5
Vertical Beamwidth (°) 17.4±1.6 15.7±1.2 14.2±0.9
Electrical Downtilt Deviation ≤1.0 ≤1.0 ≤1.0
1st Upper Sidelobe Suppression (dB) ≥17 ≥18 ≥17
Upper Sidelobe Suppression, Peak to 20°
≥19 ≥18 ≥17
(dB)
Front-To-Back Ratio 180°30° (dB) ≥25 ≥25 ≥25
Cross-polar Discrimination@0° (dB) ≥18 ≥21 ≥20
Cross-polar Discrimination over Sector (dB) ≥9 ≥9 ≥9

Y1 1710-2690, Y3 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Over All Tilts 16.4±0.5 16.8±0.5 17.0±0.6 17.3±0.6 17.4±0.4
Min Tilt 16.7 17.0 17.2 17.4 17.5
Gain (dBi)
Mid Tilt 16.5 16.9 17.0 17.2 17.4
Max Tilt 16.2 16.7 16.8 17.0 17.3
Horizontal Beamwidth (°) 64±6 60±7 60±6 58±6 57±4
Vertical Beamwidth (°) 7.0±0.6 6.7±0.3 6.0±0.5 5.4±0.3 4.9±0.3
Electrical Downtilt Deviation ≤0.8 ≤0.8 ≤0.9 ≤0.7 ≤0.8
1st Upper Sidelobe Suppression (dB) ≥17 ≥18 ≥17 ≥17 ≥18
Upper Sidelobe Suppression, Peak to 20°
≥16 ≥17 ≥17 ≥17 ≥16
(dB)
Front-To-Back Ratio 180°30° (dB) ≥25 ≥27 ≥27 ≥27 ≥25
Cross-polar Discrimination@0° (dB) ≥17 ≥17 ≥18 ≥19 ≥19
Cross-polar Discrimination over Sector (dB) ≥11 ≥13 ≥12 ≥7 ≥8

Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Over All Tilts 16.5±0.4 16.8±0.4 17.1±0.5 17.2±0.5 17.3±0.6
Min Tilt 16.6 17.0 17.4 17.4 17.5
Gain (dBi)
Mid Tilt 16.5 16.8 17.1 17.1 17.2
Max Tilt 16.4 16.6 16.9 16.9 17.0
Horizontal Beamwidth (°) 61±8 58±6 56±6 62±6 68±6
Vertical Beamwidth (°) 7.2±0.5 6.6±0.5 6.2±0.4 5.6±0.4 5.0±0.3
Electrical Downtilt Deviation ≤1.0 ≤1.0 ≤1.0 ≤1.0 ≤1.0
1st Upper Sidelobe Suppression (dB) ≥19 ≥20 ≥20 ≥17 ≥17
Upper Sidelobe Suppression, Peak to 20°
≥16 ≥16 ≥17 ≥16 ≥16
(dB)
Front-To-Back Ratio 180°30° (dB) ≥28 ≥29 ≥29 ≥27 ≥27
Cross-polar Discrimination@0° (dB) ≥20 ≥20 ≥18 ≥18 ≥19
Cross-polar Discrimination over Sector (dB) ≥14 ≥12 ≥12 ≥10 ≥10
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 156
DS-Control:0-0-2 / 1116
Outdoor Directional Penta-band Antenna
ODI-065R15MM18JJJ02-GQ
 XXXXX Pol, 65°Horizontal Beamwidth
 694-960/694-960/1710-2690/1710-2690/1710-2690MHz
 14.5/14.5/17.5/17.5/17.5dBi, E-Tilt: 2-16/2-16/2-12/2-12/2-12
 Integrated RCU

Connector Position Configuration Types

R1 R2
445

165 Y1 Y2 Y3

Connector Labeling***
Connect Code Frequency range Array
R1 694-960 l
R2 694-960 r
Y1 1710-2690 l
Y2 1710-2690 c
Y3 1710-2690 r
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
00-ZJ10(18) 1 Mounting Kit, 0-18°tilt.
iRCU-502 1 Integrated RET Controller

Optional Products (order separately)

Model Quantity Description
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 157
DS-Control:0-0-2 / 1116
Outdoor Directional Penta-band Antenna
ODI-065R16MM18JJJ-GQ
 XXXXX Pol, 65°Horizontal Beamwidth
 694-960/694-960/1710-2690/1710-2690/1710-2690MHz
 15.5/15.5/17.5/17.4/17.5dBi, E-Tilt: 0-10/0-10/0-10/0-10/0-10
 Integrated RCU

Electrical Specifications
R1 694-960, R2 694-960
Frequency Range (MHz)
694-824 790-894 880-960
Polarization ±45°
Gain (dBi) 14.4 14.8 15.5
Horizontal Beamwidth (°) 67 63 59
Vertical Beamwidth (°) 12.3 10.8 10.0
Electrical Downtilt (°) 0-10 / 0-10
1st Upper Sidelobe Suppression (dB) ≥16(0°), ≥15(5°), ≥14(10°)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0°(dB) ≥17(typ.)
Isolation Intra-system (dB) ≥26
≥2(694-960/694-960)
Isolation Inter-system (dB)
≥30(694-960/1710-2690)
Maximum Power per Port (W) 500

Y1 1710-2690, Y3 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Polarization ±45°
Gain (dBi) 16.4 16.9 17.4 17.5 17.2
Horizontal Beamwidth (°) 66 63 63 60 64
Vertical Beamwidth (°) 6.7 6.1 5.7 4.8 4.5
Electrical Downtilt (°) 0-10 / 0-10
1st Upper Sidelobe Suppression (dB) ≥15(0°), ≥15(5°), ≥14(10°)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0°(dB) ≥17
Isolation Intra-system (dB) ≥28
Isolation Inter-system (dB) ≥30
Maximum Power per Port (W) 250

Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Polarization ±45°
Gain (dBi) 16.3 17.0 17.4 17.4 17.3
Horizontal Beamwidth (°) 61 55 55 56 58
Vertical Beamwidth (°) 7.5 6.9 6.2 5.5 4.9
Electrical Downtilt (°) 0-10
1st Upper Sidelobe Suppression (dB) ≥15(0°), ≥15(5°), ≥14(10°)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0°(dB) ≥17
Isolation Intra-system (dB) ≥28
Isolation Inter-system (dB) ≥30
Maximum Power per Port (W) 250

VSWR ≤1.5:1
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Impedance (Ω) 50
Lightning Protection Direct Ground

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 158
DS-Control:0-0-3 /1116
Outdoor Directional Penta-band Antenna
ODI-065R16MM18JJJ-GQ
 XXXXX Pol, 65°Horizontal Beamwidth
 694-960/694-960/1710-2690/1710-2690/1710-2690MHz
 15.5/15.5/17.5/17.4/17.5dBi, E-Tilt: 0-10/0-10/0-10/0-10/0-10
 Integrated RCU

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 2000x445x165 / 78.7x17.5x6.5
Shipping Dimensions, HxWxD(mm) / (in) 2320x570x320 / 91.3x22.4x12.6
Net Weight, Antenna (kg) / (Ib) 40.0 / 88.2
Net Weight, Mounting Kit (kg) / (Ib) 9.4 / 20.7
Shipping Weight (kg) / (Ib) 60.4 / 133.2
Connector Type 10 x 4.3-10 Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -40 to +60
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
1169 / 204 / 1391
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

RET Specifications
Protocol to CCU/TMA 3GPP / AISG 2.0
Input Voltage Range (V) +10 to +30 DC
Power Consumption (W) ≤2(stand by); ≤13(operating)
Connectors to CCU 8 pin connector, Male, conform to AISG 2.0
Connectors to RCU 8 pin connector, Female, conform to AISG 2.0
Dimensions, HxWxD (mm) / (in)
116x53x26 / 4.6x2.1x1.0
(excluding connector)
Weight, w/o Mounting Kit (kg) / (lb) 0.2 / 0.4

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 159
DS-Control:0-0-3 /1116
Outdoor Directional Penta-band Antenna
ODI-065R16MM18JJJ-GQ
 XXXXX Pol, 65°Horizontal Beamwidth
 694-960/694-960/1710-2690/1710-2690/1710-2690MHz
 15.5/15.5/17.5/17.4/17.5dBi, E-Tilt: 0-10/0-10/0-10/0-10/0-10
 Integrated RCU

Electrical Specifications BASTA Standard**

R1 694-960, R2 694-960
Frequency Range (MHz)
694-824 790-894 880-960
Over All Tilts 14.2±0.5 14.7±0.6 15.3±0.5
Min Tilt 14.4 14.8 15.5
Gain (dBi)
Mid Tilt 14.2 14.7 15.3
Max Tilt 14.0 14.7 15.2
Horizontal Beamwidth (°) 69±8 63±5 59±5
Vertical Beamwidth (°) 12.3±1.5 10.8±1.2 10.0±0.6
Electrical Downtilt Deviation (°) ≤1.0 ≤1.0 ≤1.0
1st Upper Sidelobe Suppression (dB) ≥16 ≥16 ≥16
Upper Sidelobe Suppression, Peak to 20° (dB) ≥16 ≥15 ≥15
Front-To-Back Ratio, 180°30° (dB) ≥24 ≥25 ≥25
Cross-polar Discrimination@0° (dB) ≥17 ≥18 ≥21
Cross-polar Discrimination over Sector (dB) ≥9 ≥9 ≥10

Y1 1710-2690, Y3 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Over All Tilts 16.1±0.5 16.8±0.6 17.0±0.5 17.2±0.4 16.9±0.6
Min Tilt 16.4 16.9 17.4 17.5 17.2
Gain (dBi)
Mid Tilt 16.1 16.8 17 17.2 16.9
Max Tilt 15.8 16.6 16.7 16.9 16.7
Horizontal Beamwidth (°) 66±7 63±8 63±7 60±6 64±9
Vertical Beamwidth (°) 6.7±0.7 6.1±0.5 5.7±0.8 4.8±0.5 4.5±0.4
Electrical Downtilt Deviation (°) ≤0.6 ≤0.7 ≤0.7 ≤0.7 ≤0.8
1st Upper Sidelobe Suppression (dB) ≥16 ≥16 ≥16 ≥17 ≥18
Upper Sidelobe Suppression, Peak to 20° (dB) ≥16 ≥15 ≥15 ≥17 ≥16
Front-To-Back Ratio, 180°30° (dB) ≥25 ≥26 ≥27 ≥26 ≥26
Cross-polar Discrimination@0° (dB) ≥18 ≥17 ≥17 ≥18 ≥18
Cross-polar Discrimination over Sector (dB) ≥10 ≥10 ≥11 ≥10 ≥7

Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Over All Tilts 16.2±0.4 16.8±0.4 17.3±0.5 17.3±0.5 17.2±0.6
Min Tilt 16.3 17.0 17.4 17.4 17.3
Gain (dBi)
Mid Tilt 16.2 16.8 17.3 17.2 17.0
Max Tilt 16.1 16.6 16.9 17.0 16.8
Horizontal Beamwidth (°) 61±8 55±6 55±8 56±6 58±6
Vertical Beamwidth (°) 7.5±1.0 6.9±0.7 6.2±0.6 5.5±0.5 4.9±0.5
Electrical Downtilt Deviation (°) ≤1.0 ≤1.0 ≤1.0 ≤1.0 ≤1.0
1st Upper Sidelobe Suppression (dB) ≥17 ≥17 ≥19 ≥17 ≥17
Upper Sidelobe Suppression, Peak to 20° (dB) ≥16 ≥16 ≥17 ≥16 ≥16
Front-To-Back Ratio, 180°30° (dB) ≥28 ≥29 ≥29 ≥27 ≥27
Cross-polar Discrimination@0° (dB) ≥20 ≥20 ≥18 ≥18 ≥19
Cross-polar Discrimination over Sector (dB) ≥12 ≥12 ≥12 ≥10 ≥10
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 160
DS-Control:0-0-3 /1116
Outdoor Directional Penta-band Antenna
ODI-065R16MM18JJJ-GQ
 XXXXX Pol, 65°Horizontal Beamwidth
 694-960/694-960/1710-2690/1710-2690/1710-2690MHz
 15.5/15.5/17.5/17.4/17.5dBi, E-Tilt: 0-10/0-10/0-10/0-10/0-10
 Integrated RCU

Connector Position Configuration Types

445

165

Connector Labeling***
Connect Code Frequency range Array
R1 694-960 l
R2 694-960 r
Y1 1710-2690 l
Y2 1710-2690 c
Y3 1710-2690 r
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
00-ZJ10(12) (three mounting points) 1 Mounting Kit, 0-12°tilt.
iRCU-502 1 Integrated RET Controller

Optional Products (order separately)

Model Quantity Description
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 161
DS-Control:0-0-3 /1116
Outdoor Directional Penta-band Antenna
ODI-065R16M17JJJJ-G
 XXXXX Pol, 65°Horizontal Beamwidth
 694-960/1710-2690/1710-2690/1710-2690/1710-2690MHz
 16.0/16.4/17.1/16.4/17.1dBi, E-Tilt: 0-10/0-10/0-10/0-10/0-10
 Integrated RCU

Electrical Specifications
R1 694-960
Frequency Range (MHz)
694-824 790-894 880-960
Polarization ±45°
Gain (dBi) 15.2 15.8 16.0
Horizontal Beamwidth (°) 68 65 63
Vertical Beamwidth (°) 10.9 9.9 9.0
Electrical Downtilt (°) 0-10
1st Upper Sidelobe Suppression (dB) ≥16(0°), ≥15(5°), ≥14(10°)
Upper Sidelobe Suppression, Peak to 20° (dB) ≥16(0°), ≥15(5°), ≥14(10°)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥18(typ.)
Maximum Power per Port (W) 500

Y1 1710-2690, Y3 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Polarization ±45°
Gain (dBi) 15.4 15.7 16.1 16.1 16.4
Horizontal Beamwidth (°) 69 65 63 65 66
Vertical Beamwidth (°) 9.4 8.8 8.2 7.0 6.3
Electrical Downtilt (°) 0-10 / 0-10
1st Upper Sidelobe Suppression (dB) ≥16(0°), ≥15(5°), ≥14(10°)
Upper Sidelobe Suppression, Peak to 20° (dB) ≥15(0°), ≥15(5°), ≥14(10°)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥18(typ.)
Maximum Power per Port (W) 250

Y2 1710-2690, Y4 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Polarization ±45°
Gain (dBi) 15.7 16.1 16.4 16.5 17.1
Horizontal Beamwidth (°) 67 66 64 63 64
Vertical Beamwidth (°) 9.4 8.8 8.2 6.9 6.3
Electrical Downtilt (°) 0-10 / 0-10
1st Upper Sidelobe Suppression (dB) ≥16(0°), ≥15(5°), ≥14(10°)
Upper Sidelobe Suppression, Peak to 20°(dB) ≥15(0°), ≥15(5°), ≥14(10°)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥18(typ.)
Maximum Power per Port (W) 250

VSWR ≤1.5:1
Isolation Intra-system (dB) ≥28
Isolation Inter-system (dB) ≥30
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Impedance (Ω) 50
Lightning Protection Direct Ground

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 162
DS-Control:2-0-0 / 1216
Outdoor Directional Penta-band Antenna
ODI-065R16M17JJJJ-G
 XXXXX Pol, 65°Horizontal Beamwidth
 694-960/1710-2690/1710-2690/1710-2690/1710-2690MHz
 16.0/16.4/17.1/16.4/17.1dBi, E-Tilt: 0-10/0-10/0-10/0-10/0-10
 Integrated RCU

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 2000x380x138 / 78.7x15.0x5.4
Shipping Dimensions HxWxD(mm) / (in) 2340x490x270 / 92.1x19.3x10.6
Net Weight, Antenna (kg) / (Ib) 31.6 / 69.7
Net Weight, Mounting Kit (kg) / (Ib) 5.9 / 13.0
Shipping Weight (kg) / (Ib) 45.8 / 101.0
Connector Type 10 x 7/16 DIN-Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -40 to +60
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
1000 / 171 / 1190
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

RET Specifications
Protocol to CCU/TMA 3GPP / AISG 2.0
Input Voltage Range (V) +10 to +30 DC
Power Consumption (W) ≤2(stand by); ≤13(operating)
Connectors to CCU 8 pin connector, Male, confirm to AISG 2.0
Connectors to RCU 8 pin connector, Female, confirm to AISG 2.0
Dimensions, HxWxD (mm) / (in)
116x53x26 / 4.6x2.1x1.0
(Excluding connector)
Weight, w/o Mounting Kit (kg) / (lb) 0.2 / 0.4

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 163
DS-Control:2-0-0 / 1216
Outdoor Directional Penta-band Antenna
ODI-065R16M17JJJJ-G
 XXXXX Pol, 65°Horizontal Beamwidth
 694-960/1710-2690/1710-2690/1710-2690/1710-2690MHz
 16.0/16.4/17.1/16.4/17.1dBi, E-Tilt: 0-10/0-10/0-10/0-10/0-10
 Integrated RCU

Electrical Specifications BASTA Standard**

R1 694-960
Frequency Range (MHz)
694-824 790-894 880-960
Over All Tilts 15.1±0.4 15.7±0.4 15.7±0.4
Min Tilt 15.2 15.8 16.0
Gain (dBi)
Mid Tilt 15.1 15.8 15.8
Max Tilt 15.0 15.6 15.4
Horizontal Beamwidth (°) 68±3 65±2 63±2
Vertical Beamwidth (°) 10.9±0.7 9.9±0.8 9.0±0.2
Electrical Downtilt Deviation (°) ≤0.6 ≤0.4 ≤0.4
1st Upper Sidelobe Suppression (dB) ≥20 ≥18 ≥17
Upper Sidelobe Suppression, Peak to 20° (dB) ≥20 ≥18 ≥17
Front-To-Back Ratio, 180°30° (dB) ≥26 ≥27 ≥26
Cross-polar Discrimination@0° (dB) ≥25 ≥25 ≥26
Cross-polar Discrimination over Sector (dB) ≥10 ≥10 ≥9

Y1 1710-2690, Y3 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Over All Tilts 15.3±0.8 15.7±0.6 16.1±0.8 16.1±0.8 16.3±0.9
Min Tilt 15.4 15.7 16.1 16.1 16.4
Gain (dBi)
Mid Tilt 15.2 15.8 16.2 16.3 16.3
Max Tilt 15.2 15.6 16.0 15.9 16.2
Horizontal Beamwidth (°) 69±5 65±4 63±3 65±3 66±4
Vertical Beamwidth (°) 9.4±0.5 8.8±0.4 8.2±0.9 7.0±0.4 6.3±0.4
Electrical Downtilt Deviation (°) ≤1.0 ≤1.4 ≤1.3 ≤1.1 ≤1.1
1st Upper Sidelobe Suppression (dB) ≥16 ≥18 ≥19 ≥18 ≥16
Upper Sidelobe Suppression, Peak to 20° (dB) ≥16 ≥18 ≥16 ≥13 ≥13
Front-To-Back Ratio, 180°±30° (dB) ≥24 ≥25 ≥25 ≥24 ≥24
Cross-polar Discrimination@0° (dB) ≥27 ≥29 ≥28 ≥25 ≥22
Cross-polar Discrimination over Sector (dB) ≥13 ≥11 ≥10 ≥7 ≥8

Y2 1710-2690, Y4 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Over All Tilts 15.6±1.0 16.0±0.8 16.4±1.0 16.4±1.0 16.9±1.3
Min Tilt 15.7 16.1 16.4 16.5 17.1
Gain (dBi)
Mid Tilt 15.5 16.0 16.4 16.6 16.9
Max Tilt 15.7 16.0 16.3 16.0 16.5
Horizontal Beamwidth (°) 67±5 66±5 64±4 63±5 64±5
Vertical Beamwidth (°) 9.4±0.5 8.8±0.4 8.2±0.9 6.9±0.4 6.3±0.4
Electrical Downtilt Deviation (°) ≤0.5 ≤0.7 ≤0.7 ≤0.8 ≤0.7
1st Upper Sidelobe Suppression (dB) ≥18 ≥19 ≥19 ≥19 ≥17
Upper Sidelobe Suppression, Peak to 20° (dB) ≥18 ≥18 ≥15 ≥12 ≥13
Front-To-Back Ratio, 180°30° (dB) ≥24 ≥25 ≥25 ≥24 ≥24
Cross-polar Discrimination@0° (dB) ≥26 ≥26 ≥26 ≥23 ≥21
Cross-polar Discrimination over Sector (dB) ≥13 ≥13 ≥10 ≥8 ≥7
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 164
DS-Control:2-0-0 / 1216
Outdoor Directional Penta-band Antenna
ODI-065R16M17JJJJ-G
 XXXXX Pol, 65°Horizontal Beamwidth
 694-960/1710-2690/1710-2690/1710-2690/1710-2690MHz
 16.0/16.4/17.1/16.4/17.1dBi, E-Tilt: 0-10/0-10/0-10/0-10/0-10
 Integrated RCU

Connector Position Configuration Types

380

138

Connector Labeling***
Connect Code Frequency range Array
R1 694-960 c
Y1 1710-2690 tr
Y2 1710-2690 br
Y3 1710-2690 tl
Y4 1710-2690 bl
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
00-ZJ10(08) 1 Mounting Kit, 0-8°tilt.
iRCU-502 1 Integrated RET Controller

Optional Products (order separately)

Model Quantity Description
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 165
DS-Control:2-0-0 / 1216
Outdoor Directional Penta-band Antenna
ODI-065R17M18JJJJ-G
 XXXXX Pol, 65°Horizontal Beamwidth
 698-960/1710-2690/1710-2690/1710-2690/1710-2690MHz
 16.7/17.5/18.0/17.5/18.0dBi, E-Tilt: 0-10/0-10/0-10/0-10/0-10
 Integrated RCU

Electrical Specifications
R1 698-960
Frequency Range (MHz)
698-824 790-894 880-960
Polarization ±45°
Gain (dBi) 16.0 16.6 16.7
Horizontal Beamwidth (°) 68 66 68
Vertical Beamwidth (°) 8.7 7.7 7.1
Electrical Downtilt (°) 0-10
1st Upper Sidelobe Suppression (dB) ≥17(0°), ≥16(5°), ≥15(10°)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥17(typ.)
Maximum Power per Port (W) 500

Y1 1710-2690, Y3 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Polarization ±45°
Gain (dBi) 16.2 16.2 16.6 17.2 17.5
Horizontal Beamwidth (°) 66 63 62 64 64
Vertical Beamwidth (°) 7.5 7.2 6.7 5.5 5.1
Electrical Downtilt (°) 0-10 / 0-10
1st Upper Sidelobe Suppression (dB) ≥16(0°), ≥15(5°), ≥14(10°)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥17(typ.)
Maximum Power per Port (W) 250

Y2 1710-2690, Y4 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Polarization ±45°
Gain (dBi) 16.8 16.7 17.2 17.5 18.0
Horizontal Beamwidth (°) 66 66 62 64 63
Vertical Beamwidth (°) 7.5 7.1 6.6 5.5 5.1
Electrical Downtilt (°) 0-10 / 0-10
1st Upper Sidelobe Suppression (dB) ≥16(0°), ≥15(5°), ≥14(10°)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥17(typ.)
Maximum Power per Port (W) 250

VSWR ≤1.5:1
Isolation Intra-system (dB) ≥28
Isolation Inter-system (dB) ≥30
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Impedance (Ω) 50
Lightning Protection Direct Ground

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 166
DS-Control:2-0-2 / 1216
Outdoor Directional Penta-band Antenna
ODI-065R17M18JJJJ-G
 XXXXX Pol, 65°Horizontal Beamwidth
 698-960/1710-2690/1710-2690/1710-2690/1710-2690MHz
 16.7/17.5/18.0/17.5/18.0dBi, E-Tilt: 0-10/0-10/0-10/0-10/0-10
 Integrated RCU

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 2680x380x138 / 105.5x15.0x5.4
Shipping Dimensions, HxWxD(mm) / (in) 2995x490x270 / 117.9x19.3x10.6
Net Weight, Antenna (kg) / (Ib) 38.3 / 84.4
Net Weight, Mounting Kit (kg) / (Ib) 9.4 / 20.7
Shipping Weight (kg) / (Ib) 57.6 / 127.0
Connector Type 10 x 7/16 DIN-Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -40 to +60
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
1453 / 234 / 1745
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

RET Specifications
Protocol to CCU/TMA 3GPP / AISG 2.0
Input Voltage Range (V) +10 to +30 DC
Power Consumption (W) ≤2(stand by); ≤13(operating)
Connectors to CCU 8 pin connector, Male, conform to AISG 2.0
Connectors to RCU 8 pin connector, Female, conform to AISG 2.0
Dimensions, HxWxD (mm) / (in)
116x53x26 / 4.6x2.1x1.0
(excluding connector)
Weight, w/o Mounting Kit (kg) / (lb) 0.2 / 0.4

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 167
DS-Control:2-0-2 / 1216
Outdoor Directional Penta-band Antenna
ODI-065R17M18JJJJ-G
 XXXXX Pol, 65°Horizontal Beamwidth
 698-960/1710-2690/1710-2690/1710-2690/1710-2690MHz
 16.7/17.5/18.0/17.5/18.0dBi, E-Tilt: 0-10/0-10/0-10/0-10/0-10
 Integrated RCU

Electrical Specifications BASTA Standard**

R1 698-960
Frequency Range (MHz)
698-824 790-894 880-960
Over All Tilts 15.8±0.7 16.4±0.4 16.4±0.5
Min Tilt 16.0 16.6 16.7
Gain (dBi)
Mid Tilt 15.9 16.4 16.4
Max Tilt 15.5 16.0 15.9
Horizontal Beamwidth (°) 68±2 66±2 68±3
Vertical Beamwidth (°) 8.7±0.9 7.7±0.6 7.1±0.4
Electrical Downtilt Deviation (°) ≤0.5 ≤0.5 ≤0.5
1st Upper Sidelobe Suppression (dB) ≥18 ≥18 ≥17
Upper Sidelobe Suppression, Peak to 20°
≥18 ≥18 ≥17
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥26 ≥28 ≥27
Cross-polar Discrimination@0° (dB) ≥21 ≥23 ≥23
Cross-polar Discrimination over Sector (dB) ≥12 ≥11 ≥9

Y1 1710-2690, Y3 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Over All Tilts 16.3±0.7 16.4±0.3 16.7±0.8 17.2±0.5 17.5±0.7
Min Tilt 16.2 16.2 16.6 17.2 17.5
Gain (dBi)
Mid Tilt 16.3 16.5 16.8 17.6 17.8
Max Tilt 16.3 16.6 16.8 17.0 17.4
Horizontal Beamwidth (°) 66±6 63±3 62±3 64±5 64±4
Vertical Beamwidth (°) 7.5±0.7 7.2±0.3 6.7±0.9 5.5±0.4 5.1±0.4
Electrical Downtilt Deviation (°) ≤0.7 ≤0.7 ≤0.6 ≤0.5 ≤0.6
1st Upper Sidelobe Suppression (dB) ≥18 ≥18 ≥18 ≥16 ≥17
Upper Sidelobe Suppression, Peak to 20°
≥17 ≥17 ≥16 ≥15 ≥16
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥26 ≥26 ≥25 ≥26 ≥26
Cross-polar Discrimination@0° (dB) ≥24 ≥23 ≥24 ≥20 ≥20
Cross-polar Discrimination over Sector (dB) ≥12 ≥12 ≥8 ≥9 ≥9

Y2 1710-2690, Y4 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Over All Tilts 16.7±0.7 16.8±0.4 17.2±0.9 17.4±0.4 17.9±0.9
Min Tilt 16.8 16.7 17.2 17.5 18.0
Gain (dBi)
Mid Tilt 16.7 16.8 17.2 17.6 18.0
Max Tilt 16.7 16.8 17.2 17.3 17.8
Horizontal Beamwidth (°) 66±6 66±4 62±4 64±4 63±5
Vertical Beamwidth (°) 7.5±0.6 7.1±0.4 6.6±0.9 5.5±0.3 5.1±0.4
Electrical Downtilt Deviation (°) ≤0.7 ≤0.7 ≤0.8 ≤0.7 ≤0.6
1st Upper Sidelobe Suppression (dB) ≥18 ≥18 ≥18 ≥16 ≥16
Upper Sidelobe Suppression, Peak to 20°
≥18 ≥17 ≥17 ≥15 ≥15
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥25 ≥26 ≥26 ≥25 ≥26
Cross-polar Discrimination@0° (dB) ≥23 ≥23 ≥23 ≥20 ≥20
Cross-polar Discrimination over Sector (dB) ≥12 ≥12 ≥9 ≥9 ≥10
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 168
DS-Control:2-0-2 / 1216
Outdoor Directional Penta-band Antenna
ODI-065R17M18JJJJ-G
 XXXXX Pol, 65°Horizontal Beamwidth
 698-960/1710-2690/1710-2690/1710-2690/1710-2690MHz
 16.7/17.5/18.0/17.5/18.0dBi, E-Tilt: 0-10/0-10/0-10/0-10/0-10
 Integrated RCU

Connector Position Configuration Types

380

Y3 Y1

R1
138

Y4 Y2

Connector Labeling***
Connect Code Frequency range Array
R1 698-960 c
Y1 1710-2690 tr
Y2 1710-2690 br
Y3 1710-2690 tl
Y4 1710-2690 bl
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
00-ZJ10(08) (three mounting points) 1 Mounting Kit, 0-8°tilt.
iRCU-502 1 Integrated RET Controller

Optional Products (order separately)

Model Quantity Description
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 169
DS-Control:2-0-2 / 1216
Outdoor Directional Penta-band Antenna
ODV-065R17M18JJJJ-G
 XXXXX Pol, 65°Horizontal Beamwidth
 698-960/1710-2690/1710-2690/1710-2690/1710-2690MHz
 16.7/17.5/18.0/17.5/18.0dBi, E-Tilt: 0-10/0-10/0-10/0-10/0-10

Electrical Specifications
R1 698-960
Frequency Range (MHz)
698-824 790-894 880-960
Polarization ±45°
Gain (dBi) 16.0 16.6 16.7
Horizontal Beamwidth (°) 68 66 68
Vertical Beamwidth (°) 8.7 7.7 7.1
Electrical Downtilt (°) 0-10
1st Upper Sidelobe Suppression (dB) ≥17(0°), ≥16(5°), ≥15(10°)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥17(typ.)
Maximum Power per Port (W) 500

Y1 1710-2690, Y3 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Polarization ±45°
Gain (dBi) 16.2 16.2 16.6 17.2 17.5
Horizontal Beamwidth (°) 66 63 62 64 64
Vertical Beamwidth (°) 7.5 7.2 6.7 5.5 5.1
Electrical Downtilt (°) 0-10 / 0-10
1st Upper Sidelobe Suppression (dB) ≥16(0°), ≥15(5°), ≥14(10°)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥17(typ.)
Maximum Power per Port (W) 250

Y2 1710-2690, Y4 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Polarization ±45°
Gain (dBi) 16.8 16.7 17.2 17.5 18.0
Horizontal Beamwidth (°) 66 66 62 64 63
Vertical Beamwidth (°) 7.5 7.1 6.6 5.5 5.1
Electrical Downtilt (°) 0-10 / 0-10
1st Upper Sidelobe Suppression (dB) ≥16(0°), ≥15(5°), ≥14(10°)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥17(typ.)
Maximum Power per Port (W) 250

VSWR ≤1.5:1
Isolation Intra-system (dB) ≥28
Isolation Inter-system (dB) ≥30
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Impedance (Ω) 50
Lightning Protection Direct Ground

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 170
DS-Control:3-0-0 / 1216
Outdoor Directional Penta-band Antenna
ODV-065R17M18JJJJ-G
 XXXXX Pol, 65°Horizontal Beamwidth
 698-960/1710-2690/1710-2690/1710-2690/1710-2690MHz
 16.7/17.5/18.0/17.5/18.0dBi, E-Tilt: 0-10/0-10/0-10/0-10/0-10

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 2680x380x138 / 105.5x15.0x5.4
Shipping Dimensions, HxWxD(mm) / (in) 2995x490x270 / 117.9x19.3x10.6
Net Weight, Antenna (kg) / (Ib) 37.6 / 82.9
Net Weight, Mounting Kit (kg) / (Ib) 9.4 / 20.7
Shipping Weight (kg) / (Ib) 57.0 / 125.7
Connector Type 10 x 7/16 DIN-Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -50 to +70
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
1453 / 234 / 1745
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 171
DS-Control:3-0-0 / 1216
Outdoor Directional Penta-band Antenna
ODV-065R17M18JJJJ-G
 XXXXX Pol, 65°Horizontal Beamwidth
 698-960/1710-2690/1710-2690/1710-2690/1710-2690MHz
 16.7/17.5/18.0/17.5/18.0dBi, E-Tilt: 0-10/0-10/0-10/0-10/0-10

Electrical Specifications BASTA Standard**

R1 698-960
Frequency Range (MHz)
698-824 790-894 880-960
Over All Tilts 15.8±0.7 16.4±0.4 16.4±0.5
Min Tilt 16.0 16.6 16.7
Gain (dBi)
Mid Tilt 15.9 16.4 16.4
Max Tilt 15.5 16.0 15.9
Horizontal Beamwidth (°) 68±2 66±2 68±3
Vertical Beamwidth (°) 8.7±0.9 7.7±0.6 7.1±0.4
Electrical Downtilt Deviation (°) ≤0.5 ≤0.5 ≤0.5
1st Upper Sidelobe Suppression (dB) ≥18 ≥18 ≥17
Upper Sidelobe Suppression, Peak to 20°
≥18 ≥18 ≥17
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥26 ≥28 ≥27
Cross-polar Discrimination@0° (dB) ≥21 ≥23 ≥23
Cross-polar Discrimination over Sector (dB) ≥12 ≥11 ≥9

Y1 1710-2690, Y3 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Over All Tilts 16.3±0.7 16.4±0.3 16.7±0.8 17.2±0.5 17.5±0.7
Min Tilt 16.2 16.2 16.6 17.2 17.5
Gain (dBi)
Mid Tilt 16.3 16.5 16.8 17.6 17.8
Max Tilt 16.3 16.6 16.8 17.0 17.4
Horizontal Beamwidth (°) 66±6 63±3 62±3 64±5 64±4
Vertical Beamwidth (°) 7.5±0.7 7.2±0.3 6.7±0.9 5.5±0.4 5.1±0.4
Electrical Downtilt Deviation (°) ≤0.7 ≤0.7 ≤0.6 ≤0.5 ≤0.6
1st Upper Sidelobe Suppression (dB) ≥18 ≥18 ≥18 ≥16 ≥17
Upper Sidelobe Suppression, Peak to 20°
≥17 ≥17 ≥16 ≥15 ≥16
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥26 ≥26 ≥25 ≥26 ≥26
Cross-polar Discrimination@0° (dB) ≥24 ≥23 ≥24 ≥20 ≥20
Cross-polar Discrimination over Sector (dB) ≥12 ≥12 ≥8 ≥9 ≥9

Y2 1710-2690, Y4 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Over All Tilts 16.7±0.7 16.8±0.4 17.2±0.9 17.4±0.4 17.9±0.9
Min Tilt 16.8 16.7 17.2 17.5 18.0
Gain (dBi)
Mid Tilt 16.7 16.8 17.2 17.6 18.0
Max Tilt 16.7 16.8 17.2 17.3 17.8
Horizontal Beamwidth (°) 66±6 66±4 62±4 64±4 63±5
Vertical Beamwidth (°) 7.5±0.6 7.1±0.4 6.6±0.9 5.5±0.3 5.1±0.4
Electrical Downtilt Deviation (°) ≤0.7 ≤0.7 ≤0.8 ≤0.7 ≤0.6
1st Upper Sidelobe Suppression (dB) ≥18 ≥18 ≥18 ≥16 ≥16
Upper Sidelobe Suppression, Peak to 20°
≥18 ≥17 ≥17 ≥15 ≥15
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥25 ≥26 ≥26 ≥25 ≥26
Cross-polar Discrimination@0° (dB) ≥23 ≥23 ≥23 ≥20 ≥20
Cross-polar Discrimination over Sector (dB) ≥12 ≥12 ≥9 ≥9 ≥10
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 172
DS-Control:3-0-0 / 1216
Outdoor Directional Penta-band Antenna
ODV-065R17M18JJJJ-G
 XXXXX Pol, 65°Horizontal Beamwidth
 698-960/1710-2690/1710-2690/1710-2690/1710-2690MHz
 16.7/17.5/18.0/17.5/18.0dBi, E-Tilt: 0-10/0-10/0-10/0-10/0-10

Connector Position Configuration Types

380
Y3 Y1

R1
138

Y4 Y2

Connector Labeling***
Connect Code Frequency range Array
R1 698-960 c
Y1 1710-2690 tr
Y2 1710-2690 br
Y3 1710-2690 tl
Y4 1710-2690 bl
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
00-ZJ10(08) (three mounting points) 1 Mounting Kit, 0-8°tilt.

Optional Products (order separately)

Model Quantity Description
RCU-003(IV) 5 Remote Control Unit
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 173
DS-Control:3-0-0 / 1216
Outdoor Directional Hexa-band Antenna
ODI-065R15MM18JJKD02-GQ
 XXXXXX Pol, 65°Horizontal Beamwidth
 694-960/694-960/1710-2690/1710-2690/1710-2170/2490-2690MHz
 14.5/14.5/17.5/17.5/17.2/17.3dBi, E-Tilt: 2-16/2-16/2-12/2-12/2-12/2-12
 Integrated RCU

Electrical Specifications
R1 694-960, R2 694-960
Frequency Range (MHz)
694-824 790-894 880-960
Polarization ±45°
Gain (dBi) 13.5 14.1 14.5
Horizontal Beamwidth (°) 63 59 55
Vertical Beamwidth (°) 17.4 15.7 14.2
Electrical Downtilt (°) 2-16 / 2-16
1st Upper Sidelobe Suppression (dB) ≥15(2°), ≥14(9°), ≥14(16°)
Front-To-Back Ratio 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥18(typ.)
Isolation Intra-system (dB) ≥25
≥25(694-960/694-960),
Isolation Inter-system (dB)
≥30(694-960/1710-2690)
Maximum Power per Port (W) 500

Y1 1710-2690, Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Polarization ±45°
Gain (dBi) 16.7 17.0 17.2 17.4 17.5
Horizontal Beamwidth (°) 64 60 60 58 57
Vertical Beamwidth (°) 7.0 6.7 6.0 5.4 4.9
Electrical Downtilt (°) 2-12 / 2-12
1st Upper Sidelobe Suppression (dB) ≥17(2°), ≥16(7°), ≥14(12°)
Front-To-Back Ratio 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥20(typ.)
Isolation Intra-system (dB) ≥28
Isolation Inter-system (dB) ≥30
Maximum Power per Port (W) 250

B1 1710-2170 Y3 2490-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2490-2690
Polarization ±45°
Gain (dBi) 16.4 16.8 17.2 17.3
Horizontal Beamwidth (°) 61 58 56 68
Vertical Beamwidth (°) 7.2 6.6 6.2 5.0
Electrical Downtilt (°) 2-12 2-12
1st Upper Sidelobe Suppression (dB) ≥16(2°), ≥15(7°), ≥14(12°)
Front-To-Back Ratio 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥17(typ.)
Isolation Intra-system (dB) ≥28
Isolation Inter-system (dB) ≥30
Maximum Power per Port (W) 250

VSWR ≤1.5:1
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Impedance (Ω) 50
Lightning Protection Direct Ground

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 174
DS-Control:0-0-6 / 1116
Outdoor Directional Hexa-band Antenna
ODI-065R15MM18JJKD02-GQ
 XXXXXX Pol, 65°Horizontal Beamwidth
 694-960/694-960/1710-2690/1710-2690/1710-2170/2490-2690MHz
 14.5/14.5/17.5/17.5/17.2/17.3dBi, E-Tilt: 2-16/2-16/2-12/2-12/2-12/2-12
 Integrated RCU

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 1500x445x130 / 59.1x17.5x5.1
Shipping Dimensions, HxWxD (mm) / (in) 1815x570x320 / 71.5x22.4x12.6
Net Weight, Antenna (kg) / (Ib) 33.1 / 73.0
Net Weight, Mounting Kit (kg) / (Ib) 5.9 / 13.0
Shipping Weight (kg) / (Ib) 48.1 / 106.0
Connector Type 12 x 4.3-10 Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -40 to +60
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
877 / 108 / 1059
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

RET Specifications
Protocol to CCU/TMA 3GPP / AISG 2.0
Input Voltage Range (V) +10 to +30 DC
Power Consumption (W) ≤2(stand by); ≤13(operating)
Connectors to CCU 8 pin connector, Male, conform to AISG 2.0
Connectors to RCU 8 pin connector, Female, conform to AISG 2.0
Dimensions, HxWxD (mm) / (in)
116x53x26 / 4.6x2.1x1.0
(excluding connector)
Weight, w/o Mounting Kit (kg) / (lb) 0.2 / 0.4

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 175
DS-Control:0-0-6 / 1116
Outdoor Directional Hexa-band Antenna
ODI-065R15MM18JJKD02-GQ
 XXXXXX Pol, 65°Horizontal Beamwidth
 694-960/694-960/1710-2690/1710-2690/1710-2170/2490-2690MHz
 14.5/14.5/17.5/17.5/17.2/17.3dBi, E-Tilt: 2-16/2-16/2-12/2-12/2-12/2-12
 Integrated RCU

Electrical Specifications BASTA Standard**

R1 694-960, R2 694-960
Frequency Range (MHz)
694-824 790-894 880-960
Over All Tilts 13.3±0.8 13.9±0.5 14.2±0.6
Min Tilt 13.5 14.1 14.5
Gain (dBi)
Mid Tilt 13.3 13.9 14.2
Max Tilt 13.1 13.8 14.0
Horizontal Beamwidth (°) 63±8 59±6 55±5
Vertical Beamwidth (°) 17.4±1.6 15.7±1.2 14.2±0.9
Electrical Downtilt Deviation ≤1.0 ≤1.0 ≤1.0
1st Upper Sidelobe Suppression (dB) ≥17 ≥18 ≥17
Upper Sidelobe Suppression, Peak to 20°
≥19 ≥18 ≥17
(dB)
Front-To-Back Ratio 180°30° (dB) ≥25 ≥25 ≥25
Cross-polar Discrimination@0° (dB) ≥18 ≥21 ≥20
Cross-polar Discrimination over Sector (dB) ≥9 ≥9 ≥9

Y1 1710-2690, Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Over All Tilts 16.4±0.5 16.8±0.5 17.0±0.6 17.3±0.6 17.4±0.4
Min Tilt 16.7 17.0 17.2 17.4 17.5
Gain (dBi)
Mid Tilt 16.5 16.9 17.0 17.2 17.4
Max Tilt 16.2 16.7 16.8 17.0 17.3
Horizontal Beamwidth (°) 64±6. 60±7 60±6 58±6 57±4
Vertical Beamwidth (°) 7.0±0.6 6.7±0.3 6.0±0.5 5.4±0.3 4.9±0.3
Electrical Downtilt Deviation ≤0.8 ≤0.8 ≤0.9 ≤0.7 ≤0.8
1st Upper Sidelobe Suppression (dB) ≥17 ≥18 ≥17 ≥17 ≥18
Upper Sidelobe Suppression, Peak to 20°
≥16 ≥17 ≥17 ≥17 ≥16
(dB)
Front-To-Back Ratio 180°30° (dB) ≥25 ≥27 ≥27 ≥27 ≥25
Cross-polar Discrimination@0° (dB) ≥17 ≥17 ≥18 ≥19 ≥19
Cross-polar Discrimination over Sector (dB) ≥11 ≥13 ≥12 ≥7 ≥8

B1 1710-2170 Y3 2490-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2490-2690
Over All Tilts 16.3±0.4 16.6±0.4 16.9±0.5 17.1±0.6
Min Tilt 16.4 16.8 17.2 17.3
Gain (dBi)
Mid Tilt 16.3 16.6 16.9 17.0
Max Tilt 16.2 16.4 16.7 16.8
Horizontal Beamwidth (°) 61±8 58±6 56±6 68±6
Vertical Beamwidth (°) 7.2±0.5 6.6±0.5 6.2±0.4 5.0±0.3
Electrical Downtilt Deviation ≤1.0 ≤1.0 ≤1.0 ≤1.0
1st Upper Sidelobe Suppression (dB) ≥19 ≥20 ≥20 ≥17
Upper Sidelobe Suppression, Peak to 20°
≥16 ≥16 ≥17 ≥16
(dB)
Front-To-Back Ratio 180°30° (dB) ≥28 ≥29 ≥29 ≥27
Cross-polar Discrimination@0° (dB) ≥20 ≥20 ≥18 ≥19
Cross-polar Discrimination over Sector (dB) ≥14 ≥12 ≥12 ≥10
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 176
DS-Control:0-0-6 / 1116
Outdoor Directional Hexa-band Antenna
ODI-065R15MM18JJKD02-GQ
 XXXXXX Pol, 65°Horizontal Beamwidth
 694-960/694-960/1710-2690/1710-2690/1710-2170/2490-2690MHz
 14.5/14.5/17.5/17.5/17.2/17.3dBi, E-Tilt: 2-16/2-16/2-12/2-12/2-12/2-12
 Integrated RCU

Connector Position Configuration Types

R1 R2
445
Y3

130 Y1 Y2

B1

Connector Labeling***
Connect Code Frequency range Array
R1 694-960 l
R2 694-960 r
Y1 1710-2690 l
Y2 1710-2690 r
B1 1710-2170 c
Y3 2490-2690 c
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
00-ZJ10(18) 1 Mounting Kit, 0-18°tilt.
iRCU-602 1 Integrated RET Controller

Optional Products (order separately)

Model Quantity Description
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 177
DS-Control:0-0-6 / 1116
Outdoor Directional Hexa-band Antenna
ODI2-065R16MJJ-GQ
 XXXXXX Pol, 65°Horizontal Beamwidth
 694-960/694-960/1710-2690/1710-2690/1710-2690/1710-2690MHz
 15.5/15.5/16.0/15.7/15.5/16.0dBi, E-Tilt: 0-10/0-10/0-10/0-10/0-10/0-10
 Integrated RCU

Electrical Specifications
R1 694-960, R2 694-960
Frequency Range (MHz)
694-824 790-894 880-960
Polarization ±45°
Gain (dBi) 14.4 14.8 15.5
Horizontal Beamwidth (°) 67 63 59
Vertical Beamwidth (°) 12.2 10.8 10.0
Electrical Downtilt (°) 0-10 / 0-10
1st Upper Sidelobe Suppression (dB) ≥16(0°), ≥15(5°), ≥14(10°)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥17(typ.)
Isolation Intra-system (dB) ≥26
≥25(694-960/694-960)
Isolation Inter-system (dB)
≥30(694-960/1710-2690)
Maximum Power per Port (W) 500

Y1 1710-2690, Y4 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Polarization ±45°
Gain (dBi) 15.4 15.6 15.7 15.8 16.0
Horizontal Beamwidth (°) 64 60 60 58 57
Vertical Beamwidth (°) 7.0 6.7 6.0 5.4 4.9
Electrical Downtilt (°) 0-10 / 0-10
1st Upper Sidelobe Suppression (dB) ≥17(0°), ≥16(0°), ≥14(10°)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥18(typ.)
Isolation Intra-system (dB) ≥28
Isolation Inter-system (dB) ≥30
Maximum Power per Port (W) 250

Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Polarization ±45°
Gain (dBi) 15.1 15.3 15.4 15.5 15.7
Horizontal Beamwidth (°) 67 66 64 63 64
Vertical Beamwidth (°) 9.4 8.8 8.2 6.9 6.3
Electrical Downtilt (°) 0-10
1st Upper Sidelobe Suppression (dB) ≥16(0°), ≥15(5°), ≥14(10°)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥18(typ.)
Isolation Intra-system (dB) ≥28
Isolation Inter-system (dB) ≥30
Maximum Power per Port (W) 250

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 178
DS-Control:0-0-5 / 1216
Outdoor Directional Hexa-band Antenna
ODI2-065R16MJJ-GQ
 XXXXXX Pol, 65°Horizontal Beamwidth
 694-960/694-960/1710-2690/1710-2690/1710-2690/1710-2690MHz
 15.5/15.5/16.0/15.7/15.5/16.0dBi, E-Tilt: 0-10/0-10/0-10/0-10/0-10/0-10
 Integrated RCU

Y3 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Polarization ±45°
Gain (dBi) 14.8 15.0 15.2 15.2 15.5
Horizontal Beamwidth (°) 69 65 63 65 66
Vertical Beamwidth (°) 9.4 8.8 8.2 7.0 6.3
Electrical Downtilt (°) 0-10
1st Upper Sidelobe Suppression (dB) ≥16(0°), ≥15(5°), ≥14(10°)
Upper Sidelobe Suppression, Peak to 20°
≥15(0°), ≥15(5°), ≥14(10°)
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥25(typ.)
Cross-polar Discrimination@0° (dB) ≥18(typ.)
Maximum Power per Port (W) 250

VSWR ≤1.5:1
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Impedance (Ω) 50
Lightning Protection Direct Ground

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 2100x445x165 / 82.7x17.5x6.5
Shipping Dimensions, HxWxD (mm) / (in) 2420x570x320 / 95.3x22.4x12.6
Net Weight, Antenna (kg) / (Ib) 40.4 / 89.1
Net Weight, Mounting Kit (kg) / (Ib) 9.4 / 20.7
Shipping Weight (kg) / (Ib) 61.0 / 134.5
Connector Type 12 x 4.3-10 Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -40 to +60
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
1169 / 204 / 1391
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

RET Specifications
Protocol to CCU/TMA 3GPP / AISG 2.0
Input Voltage Range (V) +10 to +30 DC
Power Consumption (W) ≤2(stand by); ≤13(operating)
Connectors to CCU 8 pin connector, Male, conform to AISG 2.0
Connectors to RCU 8 pin connector, Female, conform to AISG 2.0
Dimensions, HxWxD (mm) / (in)
116x53x26 / 4.6x2.1x1.0
(excluding connector)
Weight, w/o Mounting Kit (kg) / (lb) 0.2 / 0.4

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 179
DS-Control:0-0-5 / 1216
Outdoor Directional Hexa-band Antenna
ODI2-065R16MJJ-GQ
 XXXXXX Pol, 65°Horizontal Beamwidth
 694-960/694-960/1710-2690/1710-2690/1710-2690/1710-2690MHz
 15.5/15.5/16.0/15.7/15.5/16.0dBi, E-Tilt: 0-10/0-10/0-10/0-10/0-10/0-10
 Integrated RCU

Electrical Specifications BASTA Standard**

R1 694-960, R2 694-960
Frequency Range (MHz)
694-824 790-894 880-960
Over All Tilts 14.2±0.5 14.7±0.6 15.3±0.5
Min Tilt 14.4 14.8 15.5
Gain (dBi)
Mid Tilt 14.2 14.7 15.3
Max Tilt 14 14.7 15.2
Horizontal Beamwidth (°) 67±8 63±5 59±5
Vertical Beamwidth (°) 12.2±1.1 10.8±0.9 10.0±0.4
Electrical Downtilt Deviation (°) ≤1.0 ≤1.0 ≤1.0
1st Upper Sidelobe Suppression (dB) ≥16 ≥16 ≥16
Upper Sidelobe Suppression, Peak to 20°
≥16 ≥15 ≥15
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥24 ≥25 ≥25
Cross-polar Discrimination@0° (dB) ≥17 ≥18 ≥21
Cross-polar Discrimination over Sector(dB) ≥9 ≥9 ≥10

Y1 1710-2690, Y4 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Over All Tilts 15.2±0.5 15.5±0.5 15.7±0.6 15.7±0.6 16.0±0.4
Min Tilt 15.4 15.6 15.7 15.8 16.0
Gain (dBi)
Mid Tilt 15.2 15.5 15.8 15.7 16.0
Max Tilt 15.2 15.4 15.6 15.5 15.9
Horizontal Beamwidth (°) 64±6 60±7 60±6 58±6 57±4
Vertical Beamwidth (°) 7.0±0.6 6.7±0.3 6.0±0.5 5.4±0.3 4.9±0.3
Electrical Downtilt Deviation (°) ≤0.8 ≤0.8 ≤0.9 ≤0.7 ≤0.8
1st Upper Sidelobe Suppression (dB) ≥17 ≥18 ≥17 ≥17 ≥18
Upper Sidelobe Suppression, Peak to 20°
≥16 ≥17 ≥17 ≥17 ≥16
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥25 ≥27 ≥27 ≥27 ≥25
Cross-polar Discrimination@0° (dB) ≥17 ≥17 ≥18 ≥19 ≥19
Cross-polar Discrimination over Sector (dB) ≥11 ≥13 ≥12 ≥7 ≥8

Y2 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Over All Tilts 15.0±1.0 15.3±0.8 15.5±1.0 15.6±1.0 15.7±1.3
Min Tilt 15.1 15.3 15.4 15.5 15.7
Gain (dBi)
Mid Tilt 14.9 15.2 15.5 15.6 15.7
Max Tilt 14.9 15.2 15.3 15.4 15.6
Horizontal Beamwidth (°) 67±5 66±5 64±4 63±5 64±5
Vertical Beamwidth (°) 9.4±0.5 8.8±0.4 8.2±0.9 6.9±0.4 6.3±0.4
Electrical Downtilt Deviation (°) ≤0.5 ≤0.7 ≤0.7 ≤0.8 ≤0.7
1st Upper Sidelobe Suppression (dB) ≥18 ≥18 ≥17 ≥18 ≥17
Upper Sidelobe Suppression, Peak to 20°
(dB) ≥18 ≥18 ≥15 ≥12 ≥12
Front-To-Back Ratio, 180°30° (dB) ≥24 ≥25 ≥25 ≥24 ≥24
Cross-polar Discrimination@0° (dB) ≥26 ≥26 ≥23 ≥19 ≥18
Cross-polar Discrimination over Sector (dB) ≥13 ≥13 ≥9 ≥6 ≥7

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 180
DS-Control:0-0-5 / 1216
Outdoor Directional Hexa-band Antenna
ODI2-065R16MJJ-GQ
 XXXXXX Pol, 65°Horizontal Beamwidth
 694-960/694-960/1710-2690/1710-2690/1710-2690/1710-2690MHz
 15.5/15.5/16.0/15.7/15.5/16.0dBi, E-Tilt: 0-10/0-10/0-10/0-10/0-10/0-10
 Integrated RCU

Y3 1710-2690
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170 2300-2500 2490-2690
Over All Tilts 14.7±0.8 15.1±0.6 15.2±0.8 15.2±0.8 15.4±0.9
Min Tilt 14.8 15.0 15.2 15.2 15.5
Gain (dBi)
Mid Tilt 14.6 15.1 15.3 15.4 15.4
Max Tilt 14.6 14.9 15.1 15.0 15.3
Horizontal Beamwidth (°) 69±5 65±4 63±3 65±3 66±4
Vertical Beamwidth (°) 9.4±0.5 8.8±0.4 8.2±0.9 7.0±0.4 6.3±0.4
Electrical Downtilt Deviation (°) ≤1.0 ≤1.4 ≤1.3 ≤1.1 ≤1.1
1st Upper Sidelobe Suppression (dB) ≥16 ≥17 ≥18 ≥18 ≥17
Upper Sidelobe Suppression, Peak to 20°
≥16 ≥17 ≥16 ≥13 ≥13
(dB)
Front-To-Back Ratio, 180°30° (dB) ≥24 ≥25 ≥25 ≥24 ≥24
Cross-polar Discrimination@0° (dB) ≥26 ≥28 ≥24 ≥21 ≥20
Cross-polar Discrimination over Sector (dB) ≥11 ≥11 ≥9 ≥7 ≥8
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

Connector Position Configuration Types

445

165

Connector Labeling***
Connect Code Frequency range Array
R1 694-960 l
R2 694-960 r
Y1 1710-2690 l
Y2 1710-2690 bc
Y3 1710-2690 tc
Y4 1710-2690 r
***R-Red, Y-Yellow, B-Blue, l-left array, r-right array, c-center array, t-top array, b-bottom array

Accessories
Model Quantity Description
00-ZJ10(12) (three mounting points) 1 Mounting Kit, 0-12°tilt.
iRCU-602 1 Integrated RET Controller

Optional Products (order separately)

Model Quantity Description
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 181
DS-Control:0-0-5 / 1216
Outdoor Directional Dual-beam Antenna
ODDV-032R20K-G
 XX Pol, 32°Horizontal Beamwidth
 1710-2170/1710-2170MHz
 19.9/19.9dBi, E-Tilt: 0-10/0-10

Electrical Specifications
B1 1710-2170, B2 1710-2170
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170
Polarization ±45°
Gain (dBi) 19.2 19.5 19.9
Horizontal Beam Centers (°) ±32 ±28 ±27
Horizontal Beamwidth (°) 36 33 31
Vertical Beamwidth (°) 7.2 6.7 6.3
Electrical Downtilt (°) 0-10 / 0-10
1st Upper Sidelobe Suppression (dB) ≥19(0°), ≥17(5°), ≥15(10°)
Front-To-Back Ratio, 180°30° (dB) ≥25
VSWR ≤1.5:1
Cross-polar Isolation (dB) ≥28
IM3 (2x43 dBm Carrier) (dBc) ≤-150
Maximum Power per Port (W) 300
Impedance (Ω) 50
Lightning Protection Direct Ground

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 1340x320x110 / 52.8x12.6x4.3
Shipping Dimensions, HxWxD(mm) / (in) 1640x430x215 / 64.6x16.9x8.5
Net Weight, Antenna (kg) / (Ib) 15.3 / 33.7
Net Weight, Mounting Kit (kg) / (Ib) 9.4 / 20.7
Shipping Weight (kg) / (Ib) 26.4 / 58.2
Connector Type 4 x 7/16 DIN-Female or 4 x 4.3-10 Female
Connector Location Bottom
Radome Material and Color Fiberglass, Light Grey
Operational Temperature (°C) -50 to +70
Operational Humidity (%) ≤95
Operational / Max Wind Speed (km/h) 150 / 200
Wind Load* @150km/h
582 / 89 / 676
Frontal / Lateral / Rearside (N)
*Wind Load refer to TIA-222-G standard

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 182
DS-Control:3-0-6 / 1216
Outdoor Directional Dual-beam Antenna
ODDV-032R20K-G
 XX Pol, 32°Horizontal Beamwidth
 1710-2170/1710-2170MHz
 19.9/19.9dBi, E-Tilt: 0-10/0-10

Electrical Specifications BASTA Standard**

B1 1710-2170, B2 1710-2170
Frequency Range (MHz)
1710-1880 1850-1990 1920-2170
Over All Tilts 19.3±0.8 19.8±0.3 20.0±0.8
Min Tilt 19.2 19.5 19.9
Gain (dBi)
Mid Tilt 19.3 19.9 20.3
Max Tilt 19.3 19.7 19.8
Horizontal Beamwidth (°) 36±3 33±3 31±4
Vertical Beamwidth (°) 7.2±0.5 6.7±0.3 6.3±0.6
Electrical Downtilt Deviation (°) ≤0.4 ≤0.5 ≤0.6
1st Upper Sidelobe Suppression (dB) ≥18 ≥18 ≥18
Upper Sidelobe Suppression, Peak to 20° (dB) ≥18 ≥18 ≥15
Front-To-Back Ratio, 180°30° (dB) ≥28 ≥29 ≥29
**Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

Connector Position

320

110

Accessories
Model Quantity Description
00-ZJ10(16) 1 Mounting Kit, 0-16°tilt.

Optional Products (order separately)

Model Quantity Description
RCU-003(IV) 2 Remote Control Unit
PCU-H002 1 Portable Control Unit

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 183
DS-Control:3-0-6 / 1216
Indoor Omni Ceiling Mounted Antenna
IXD-360V03NN(05)
 V Pol, 360° Horizontal Beamwidth
 698-960/1710-2700MHz
 2.0/4.0dBi

Electrical Specifications
698-960
Frequency Range (MHz)
698-824 790-894 880-960
Polarization Vertical
Gain (dBi) 1.6 1.9 2.0
Horizontal Beamwidth (°) 360
VSWR ≤2.0:1
Maximum Power per Port (W) 50

1710-2700
Frequency Range (MHz)
1710-1990 1920-2170 2300-2700
Polarization Vertical
Gain (dBi) 3.5 3.7 4.0
Horizontal Beamwidth (°) 360
VSWR ≤1.5:1
Maximum Power per Port (W) 50

IM3 (2x33dBm Carrier) (dBc) <-140

Impedance (Ω) 50
Lightning Protection Direct Ground

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) Φ208x112 / Φ8.2x4.4
Shipping Dimensions, HxWxD(mm) / (in) 175x175x180 / 6.9x6.9x7.1
Net Weight, Antenna (kg) / (Ib) 0.4 / 0.9
Shipping Weight (kg) / (Ib) 0.5 / 1.1
Connector Type 1 x N Female
Connector Location Top
Radome Material and Color ABS, White
Operational Temperature (°C) -30 to +45

Connector Position Installation Guide

698-960
1710-2700
208

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 184
DS-Control:3-0-5 / 1216
Indoor Omni Ceiling Mounted Antenna
IXD-360VH03NN
 VH Pol, 360° Horizontal Beamwidth
 698-960/1710-2700MHz
 4.0/4.8dBi

Electrical Specifications
698-960
Frequency Range (MHz)
698-824 790-894 880-960
Polarization Vertical & Horizontal
Gain (dBi) 3.9 3.7 4.0
Horizontal Beamwidth (°) 360
Isolation between Ports (dB) ≥18
Maximum Power per Port (W) 50

1710-2700
Frequency Range (MHz)
1710-1990 1920-2170 2300-2700
Polarization Vertical & Horizontal
Gain (dBi) 4.3 4.5 4.8
Horizontal Beamwidth (°) 360
Isolation between Ports (dB) ≥20
Maximum Power per Port (W) 50

VSWR ≤2.0:1
IM3 (2x33dBm Carrier) (dBc) <-140
Impedance (Ω) 50
Lightning Protection Direct Ground

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) Φ210x41 / Φ8.3x1.6
Shipping Dimensions, HxWxD(mm) / (in) 205x205x210 / 8.1x8.1x8.3
Net Weight, Antenna (kg) / (Ib) 0.4 / 0.9
Shipping Weight (kg) / (Ib) 0.6 / 1.3
Connector Type 2 x N Female
Connector Location Top
Radome Material and Color ABS, White
Operational Temperature (°C) -30 to +45

Connector Position Installation Guide

698-960 698-960
1710-2700 1710-2700 210

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 185
DS-Control:3-0-1 / 1216
Indoor Directional Wall Mounted Antenna
IWH-090V08N0-D
 V Pol, 90° Horizontal Beamwidth
 698-960/1710-2700MHz
 5.5/7.5dBi

Electrical Specifications
698-960
Frequency Range (MHz)
698-824 790-894 880-960
Polarization Vertical
Gain (dBi) 4.0 5.0 5.5
Horizontal Beamwidth (°) 92 90 87
Vertical Beamwidth (°) 31 27 25
VSWR ≤1.8:1 ≤1.5:1

1710-2700
Frequency Range (MHz)
1710-1990 1920-2170 2300-2700
Polarization Vertical
Gain (dBi) 7.4 7.5 7.5
Horizontal Beamwidth (°) 82 84 103
Vertical Beamwidth (°) 52 55 58
VSWR ≤1.5:1

IM3 (2x33dBm Carrier) (dBc) <-140

Maximum Power per Port (W) 50
Impedance (Ω) 50
Lightning Protection Direct Ground

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 210x180x44 / 8.3x7.1x1.7
Shipping Dimensions, HxWxD(mm) / (in) 255x190x60 / 10.0x7.5x2.4
Net Weight, Antenna (kg) / (Ib) 0.6 / 1.3
Shipping Weight (kg) / (Ib) 0.8 / 1.8
Connector Type 1 x N Female
Connector Location Top
Radome Material and Color ABS, White
Operational Temperature (°C) -30 to +45

Connector Position Installation Guide

180

44
698-960
1710-2700

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 186
DS-Control:3-0-0 / 1216
Indoor Directional Wall Mounted Antenna
IWH-090VR08NT
 VX Pol, 90° Horizontal Beamwidth
 790-960/1710-2700MHz
 7.0/8.2dBi

Electrical Specifications
790-960
Frequency Range (MHz)
790-894 880-960
Polarization Vertical
Gain (dBi) 6.7 7.0
Horizontal Beamwidth (°) 90 86
Vertical Beamwidth (°) 55 52

1710-2700
Frequency Range (MHz)
1710-1990 1920-2170 2300-2700
Polarization ±45°
Gain (dBi) 7.8 8.2 8.2
Horizontal Beamwidth (°) 76 73 65
Vertical Beamwidth (°) 44 42 52

VSWR ≤1.5:1
IM3 (2x33dBm Carrier) (dBc) <-140
Maximum Power per Port (W) 50
Impedance (Ω) 50
Lightning Protection Direct Ground

Mechanical Specifications Outline Drawing

Dimensions, HxWxD (mm) / (in) 278x176x62 / 10.9x6.9x2.4
Shipping Dimensions, HxWxD(mm) / (in) 338x221x80 / 13.3x8.7x3.1
Net Weight, Antenna (kg) / (Ib) 0.7 / 1.5
Shipping Weight (kg) / (Ib) 0.8 / 1.8
Connector Type 2 x N Female
Connector Location Top
Radome Material and Color PVC, Light Grey
Operational Temperature (°C) -30 to +45

Connector Position Installation Guide

176

62
1710-2700 790-960
1710-2700

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 187
DS-Control:3-0-1 / 1216
Remote Control Unit
RCU-003(IV)
 3GPP / AISG 2.0 Compliance
 Compact size and IP65 protection class

Electrical Specifications
Connectors to CCU 8 pin connector, Male, conform to AISG 2.0
Connectors to RCU 8 pin connector, Female, conform to AISG 2.0
Power Supply (V) +10 to +30 DC
Power Consumption (W) <1 (stand by); <10 (operating)
Protocol to CCU/TMA 3GPP / AISG 2.0
Adjustment Time, full range (s) 60 (typically, depending on antenna type)
Adjustment Cycles >50,000
8 kA (8/20 µs)
Lightning Protection
2.5 kA (10/350 µs)

Mechanical Specifications
Dimensions, HxWxD (mm) / (in) 124.5x44x41 / 4.9x1.7x1.6
Weight (kg) / (Ib) 0.25 / 0.56
Shipping Dimensions, HxWxD (mm) / (in) 145x52x48 / 5.7x2.0x1.9
Shipping Weight (kg) / (Ib) 0.35 / 0.77
Housing Material and Color Aluminum, Light Grey
Operating Temperature (oC) -40 to +60
Environment Class IP65

Product View Connector

Daisy chain out, female

Daisy chain in, male

RCU bottom view

Male Connector Female Connector

PIN assignment according AISG:

Standards: 1. not connected
EN 55022:2010
2. not connected
EN 55024:2010
EN 61000-3-2:2006+A1:2009+A2:2009 3. RS485 B
EN 61000-3-3:2009 4. not connected
5. RS485 A
Certification: 6. +10 V ~ +30 V DC (+24 V DC nominal)
CE 7. DC Return
8. not connected

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 188
DS-Control:3-0-5 / 1216
Internal Remote Control Unit
IRCU-302
 IRCU-302 supports 1 to 3 band antenna
 3GPP / AISG 2.0 Compliance
 Compact, lightweight

Electrical Specifications
Connectors to CCU 8 pin connector, Male, conform to AISG 2.0
Connectors to RCU 8 pin connector, Female, conform to AISG 2.0
Power Supply (V) +10 to +30 DC
Power Consumption (W) <2 (stand by); <13 (operating)
Protocol to CCU/TMA 3GPP / AISG 2.0
Operation mode Single RET(Preset) or Multi RET
Adjustment Time, full range (s) 60 (typically, depending on antenna type)
Adjustment Cycles, used with antenna >50,000

Mechanical Specifications
Dimensions, HxWxD (mm) / (in) (Excluding
100×53×26 / 3.9x2.1x1.0
connector)
Weight (kg) / (Ib) 0.16 / 0.35
Shipping Dimensions, HxWxD (mm) / (in) 142x108x60 / 5.59x4.3x2.4
Shipping Weight (kg) / (Ib) 0.26 / 0.57
Housing Material and Color Aluminum, Light Grey
Operating Temperature (oC) -40 to +60
Lightning Protection (kA) 10 ( 8/20 µs )

Product View Connector

Daisy chain in, male Daisy chain out, female

Male Connector Female Connector

PIN assignment according AISG:

Standards: 1. not connected
EN 55022:2010
2. not connected
EN 55024:2010
EN 61000-3-2:2006+A1:2009+A2:2009 3. RS485 B
EN 61000-3-3:2009 4. not connected
5. RS485 A
Certification: 6. +10 V ~ +30 V DC (+24 V DC nominal)
CE 7. DC Return
8. not connected

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 189
DS-Control:3-0-1 / 1216
Internal Remote Control Unit
IRCU-502
 IRCU-502 supports 4 or 5 band antenna
 3GPP / AISG 2.0 Compliance
 Compact, lightweight

Electrical Specifications
Connectors to CCU 8 pin connector, Male, conform to AISG 2.0
Connectors to RCU 8 pin connector, Female, conform to AISG 2.0
Power Supply (V) +10 to +30 DC
Power Consumption (W) <2 (stand by); <13 (operating)
Protocol to CCU/TMA 3GPP / AISG 2.0
Operation mode Single RET(Preset) or Multi RET
Adjustment Time, full range (s) 60 (typically, depending on antenna type)
Adjustment Cycles, used with antenna >50,000

Mechanical Specifications
Dimensions, HxWxD (mm) / (in) (Excluding
116x53x26 / 4.6x2.1x1.0
connector)
Weight (kg) / (Ib) 0.2 / 0.4
Shipping Dimensions, HxWxD (mm) / (in) 142x108x60 / 5.59x4.3x2.4
Shipping Weight (kg) / (Ib) 0.3 / 0.7
Housing Material and Color Aluminum, Light Grey
Operating Temperature (oC) -40 to +60
Lightning Protection (kA) 10 ( 8/20 µs )

Product View Connector

Daisy chain in, male Daisy chain out, female

Male Connector Female Connector

PIN assignment according AISG:

Standards: 1. not connected
EN 55022:2010
2. not connected
EN 55024:2010
EN 61000-3-2:2006+A1:2009+A2:2009 3. RS485 B
EN 61000-3-3:2009 4. not connected
5. RS485 A
Certification: 6. +10 V ~ +30 V DC (+24 V DC nominal)
CE 7. DC Return
8. not connected

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 190
DS-Control:3-0-1 / 1216
Internal Remote Control Unit
IRCU-602
 IRCU-602 supports 6 band antenna
 3GPP / AISG 2.0 Compliance
 Compact, lightweight

Electrical Specifications
Connectors to CCU 8 pin connector, Male, conform to AISG 2.0
Connectors to RCU 8 pin connector, Female, conform to AISG 2.0
Power Supply (V) +10 to +30 DC
Power Consumption (W) <2 (stand by); <13 (operating)
Protocol to CCU/TMA 3GPP / AISG 2.0
Operation mode Single RET(Preset) or Multi RET
Adjustment Time, full range (s) 60 (typically, depending on antenna type)
Adjustment Cycles, used with antenna >50,000

Mechanical Specifications
Dimensions, HxWxD (mm) / (in) (Excluding
116x53x26 / 4.6x2.1x1.0
connector)
Weight (kg) / (Ib) 0.2 / 0.4
Shipping Dimensions, HxWxD (mm) / (in) 142x108x60 / 5.59x4.3x2.4
Shipping Weight (kg) / (Ib) 0.3 / 0.7
Housing Material and Color Aluminum, Light Grey
Operating Temperature (oC) -40 to +60
Lightning Protection (kA) 10 ( 8/20 µs )

Product View Connector

Daisy chain in, male Daisy chain out, female

Male Connector Female Connector

PIN assignment according AISG:

Standards: 1. not connected
EN 55022:2010
2. not connected
EN 55024:2010
EN 61000-3-2:2006+A1:2009+A2:2009 3. RS485 B
EN 61000-3-3:2009 4. not connected
5. RS485 A
Certification: 6. +10 V ~ +30 V DC (+24 V DC nominal)
CE 7. DC Return
8. not connected

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 191
DS-Control:3-0-1 / 1216
Portable Control Unit
PCU-H002
 PCU (Portable Control Unit) is a portable RET controller
used to setup, calibrate and Control for all type of Comba RCU
 AISG v2.0 and 3GPP Compliance
 Built-in Battery

Electrical Specifications
Reference Standard AISG2.0, 3GPP
1 x 8 pin Female Connector according to IEC 60130-9
Connectors Type
1 x Mini USB Connector
Max. Numbers of RCU Support 12
Adjusting Tilt Accuracy ±0.1°
Input Power DC+28V, 1.5A
Output Power DC+19V, 1.5A
Power Supply Li-pol battery, DC+22.2V
Battery Power >6 hours (Continuously running of RCU)
Charging time / Recharge cycles 4 hours / >300

Mechanical Specifications
Dimensions, HxWxD (mm) / (in) (excluding
220x98x39 / 8.7x3.9x1.5
connector)
Weight (kg) / (Ib) 0.6 / 1.3
Housing Material and Color ABS, Light Grey
Display Touchscreen, backlight
Operating Temperature (°C) -10 to +50
Operating Humidity (%) 20 to 90
Shipping Dimensions, HxWxD (mm) / (in) 270x147x125 / 10.6x5.8x4.9
Shipping Weight (kg) / (Ib) 1.5 / 3.3

Product View

AISG Port 28V DC Adapter Port

Mini USB Port

Standards:
EN 55022:2010
EN 55024:2010

Certification:
CE

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 192
DS-Control:1-0-3 / 0117
AISG Control Cable
00-KX02A(xx) (xx=cable length in meter)
 5-core cable use for connection between AISG antenna line devices
 Weather resistance
 Supply in various length

Electrical Specifications
Operating Voltage (V) 250
Operating Current @40°C (A) 5
Pulsating Voltage (V) 1200
Insulation Resistance (Ω) >3x10
Contact Resistance (mΩ) <5

Mechanical Specifications
Cable Specification 2Cx0.32 + 3Cx0.75
2 x 8 pin circular connector, 1 Male + 1 Female
Connector Type
According IEC 60130-9
Operating Temperature -40 to +85
Operating Humidity ≤95
Environmental Class IP67

Ordering Information Connector

00-KX02A(0.5) (m) / (in) 0.5 / 19.7
00-KX02A(1) (m) / (in) 1 / 39.4
00-KX02A(2) (m) / (in) 2 / 78.7
00-KX02A(3) (m) / (in) 3 / 118.1
00-KX02A(5) (m) / (in) 5 / 196.9
00-KX02A(7) (m) / (in) 7 / 275.6
00-KX02A(10) (m) / (in) 10 / 393.7
00-KX02A(15) (m) / (in) 15 / 590.6
00-KX02A(20) (m) / (in) 20 / 787.4
00-KX02A(25) (m) / (in) 25 / 984.3 Male Connector Female Connector

00-KX02A(30) (m) / (in) 30 / 1,181.1

00-KX02A(40) (m) / (in) 40 / 1,574.8
00-KX02A(50) (m) / (in) 50 / 1,968.5
00-KX02A(60) (m) / (in) 60 / 2,362.2 PIN assignment according AISG:
1 +13 V DC (+12 V DC nominal)
00-KX02A(70) (m) / (in) 70 / 2,755.9
2 not connected
00-KX02A(80) (m) / (in) 80 / 3,149.6 3 RS485 B
00-KX02A(90) (m) / (in) 90 / 3,543.3 4 not connected
00-KX02A(100) (m) / (in) 100 / 3937 5 RS485 A
6 +29 V DC (+24 V DC nominal)
00-KX02A(110) (m) / (in) 110 / 4331
7 DC Return
00-KX02A(120) (m) / (in) 120 / 4724 8 not connected
00-KX02A(130) (m) / (in) 130 / 5118
00-KX02A(140) (m) / (in) 140 / 5512

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 193
DS-Control:3-0-3 / 1216
Outdoor Dual-band Combiner
CM-AB2-ODx, CM-AB2D-ODx
x=1, 2, 3 or 4, Preconfigured DC/AISG By-pass

698-806MHz 824-960MHz

Electrical Specifications
Frequency Range (MHz) Band1: 698-806 Band2: 824-960
Insertion Loss (dB) ≤0.4
Isolation between Ports (dB) ≥50
Return Loss (dB) ≥20
Maximum Input Power per Port (W) 250
Intermodulation Products (dBc) ≤-160@2x43dBm
Impedance (Ω) 50
DC/AISG transparency By-pass (max. 3000 mA)
Lightning Protection Comply with IEC 61000-4-5; 8kA, 8/20s
MTBF (Hours) ≥500,000

Mechanical Specifications
Model Single Unit Double Units
Dimensions, LxWxH (excluding connectors and
206x181x60 / 8.1x7.1x2.4 206x181x123 / 8.1x7.1x4.8
mounting bracket) (mm) / (in)
Weight (kg) / (lb) 3.2 / 7.1 6.6 / 14.6
Shipping Dimensions, LxWxH (mm) / (in) 400x300x220 / 15.7x11.8x8.56 465x365x250 / 18.3x14.4x9.8
Shipping Weight (kg) / (lb) 4.9 / 10.8 8.1 / 17.9
RF Connectors 7/16 DIN-Female
Mounting Pole (clamps included for Ф35-125mm pole) or Wall Mounted
Operating Temperature Range (°C) -40 to +65
Operational Humidity (%) ≤100
Environmental Class IP67

Photo & Block Diagram

Port 3
DC/AISG Bypass

DC/AISG Bypass

Port 1 Port 2
698-806MHz 824-960MHz

Single Unit CM-AB2-OD4

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 194
DS-Control:0-0-0 / 1216
Outdoor Dual-band Combiner
CM-AB2-ODx, CM-AB2D-ODx
x=1, 2, 3 or 4, Preconfigured DC/AISG By-pass

698-806MHz 824-960MHz

Outline Drawing

4 3 .5 9 2 .5

4 3 .5 9 2 .5

63
24.5

24.5
87 150
60 181 123 181

206
206

Single Unit Double Units

Ordering Information
Single Unit Model Double Units Model Connector Type
CM-AB2-ODx* CM-AB2D-ODx* 7/16 DIN Female
CM-AB2-OAx* CM-AB2D-OAx* 4.3-10 Female

* DC/AISG By-pass Optional: x=1,2,3 or 4

1- No DC/AISG By-pass 2- DC/AISG By-pass@Band1
3- DC/AISG By-pass@Band2 4- Full DC/AISG By-pass

Accessories
Model Quantity Description
00-W331-5016 2 Mounting Kit
KK63020099 2 Hose Clamp, ∅30-125mm

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 195
DS-Control:0-0-0 / 1216
Outdoor Dual-band Combiner
CM-AC2-ODx, CM-AC2D-ODx
x=1, 2, 3 or 4, Preconfigured DC/AISG By-pass

698-798MHz 817-894MHz

Electrical Specifications
Frequency Range (MHz) Band1: 698-798 Band2: 817-894
Insertion Loss (dB) ≤0.4
Isolation between Ports (dB) ≥60
Return Loss (dB) ≥20
Coupling Value at Com Port (dB) 43.5±2
Maximum Input Power per Port (W) 300
Intermodulation Products (dBc) ≤-153@2x43dBm
Impedance (Ω) 50
DC/AISG transparency By-pass (max. 3000 mA)
Lightning Protection Comply with IEC 61000-4-5; 8kA, 8/20s
MTBF (Hours) ≥500,000

Mechanical Specifications
Model Single Unit Double Units
Dimensions, LxWxH (excluding connectors and
246x178x56 / 9.7x7.0x2.2 246x178x113 / 9.7x7.0x4.4
mounting bracket) (mm) / (in)
Weight (kg) / (lb) 3.2 / 7.1 6.6 / 14.6
Shipping Dimensions, LxWxH (mm) / (in) 400x300x220 / 15.7x11.8x8.56 465x365x250 / 18.3x14.4x9.8
Shipping Weight (kg) / (lb) 4.9 / 10.8 8.1 / 17.9
RF Connectors 7/16 DIN-Female
Mounting Pole (clamps included for Ф35-125mm pole) or Wall Mounted
Operating Temperature Range (°C) -40 to +65
Operational Humidity (%) ≤100
Environmental Class IP67

Photo & Block Diagram

Port 3 Coupling
DC/AISG Bypass

DC/AISG Bypass

Port 1 Port 2
698-798MHz 817-894MHz

Single Unit CM-AC2-OD4

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 196
DS-Control:3-0-1 / 1216
Outdoor Dual-band Combiner
CM-AC2-ODx, CM-AC2D-ODx
x=1, 2, 3 or 4, Preconfigured DC/AISG By-pass

698-798MHz 817-894MHz

Outline Drawing
61 79

61 79

57
18
18

88 178 145 178

56 113
246
379

246
379
824-960 698-803 824-960 698-803

Single Unit Double Units

Ordering Information
Single Unit Model Double Units Model Connector Type
CM-AC2-ODx* CM-AC2D-ODx* 7/16 DIN Female
CM-AC2-OAx* CM-AC2D-OAx* 4.3-10 Female

* DC/AISG By-pass Optional: x=1,2,3 or 4

1- No DC/AISG By-pass 2- DC/AISG By-pass@Band1
3- DC/AISG By-pass@Band2 4- Full DC/AISG By-pass

Accessories
Model Quantity Description
00-W331-5016 2 Mounting Kit
KK63020099 2 Hose Clamp, ∅30-125mm

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 197
DS-Control:3-0-1 / 1216
Outdoor Dual-band Combiner
CM-AE2-ODx, CM-AE2D-ODx
x=1, 2, 3 or 4, Preconfigured DC/AISG By-pass

790-862MHz 880-960MHz

Electrical Specifications
Frequency Range (MHz) Band1: 790-862 Band2: 880-960
Insertion Loss (dB) ≤0.4
Isolation between Ports (dB) ≥50
Return Loss (dB) ≥18
Maximum Input Power per Port (W) 300
Intermodulation Products (dBc) ≤-155@2x43dBm
Impedance (Ω) 50
DC/AISG transparency By-pass (max. 3000 mA)
Lightning Protection Comply with IEC 61000-4-5; 8kA, 8/20s
MTBF (Hours) ≥500,000

Mechanical Specifications
Model Single Unit Double Units
Dimensions, LxWxH (excluding connectors and
188x176x68 / 7.4x6.9x2.7 188x176x138 / 7.4x6.9x5.4
mounting bracket) (mm) / (in)
Weight (kg) / (lb) 2.4 / 5.3 5.0 / 11.0
Shipping Dimensions, LxWxH (mm) / (in) 350x250x130 / 13.8x9.8x5.1 350x250x200 / 13.8x9.8x7.9
Shipping Weight (kg) / (lb) 2.9 / 6.4 6.0 / 13.2
RF Connectors 7/16 DIN-Female
Mounting Pole (clamps included for Ф35-125mm pole) or Wall Mounted
Operating Temperature Range (°C) -40 to +65
Operational Humidity (%) ≤100
Environmental Class IP67

Photo & Block Diagram

Single Unit CM-AE2-OD4

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 198
DS-Control:3-0-4 / 1216
Outdoor Dual-band Combiner
CM-AE2-ODx, CM-AE2D-ODx
x=1, 2, 3 or 4, Preconfigured DC/AISG By-pass

790-862MHz 880-960MHz

Outline Drawing

112

112

70
17

17
68 138
53.5 176 123.5 176
188

188
Single Unit Double Units

Ordering Information
Single Unit Model Double Units Model Connector Type
CM-AE2-ODx* CM-AE2D-ODx* 7/16 DIN Female
CM-AE2-OAx* CM-AE2D-OAx* 4.3-10 Female

* DC/AISG By-pass Optional: x=1,2,3 or 4

1- No DC/AISG By-pass 2- DC/AISG By-pass@Band1
3- DC/AISG By-pass@Band2 4- Full DC/AISG By-pass

Accessories
Model Quantity Description
00-W331-5016 2 Mounting Kit
KK63020099 2 Hose Clamp, ∅30-125mm

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 199
DS-Control:3-0-4 / 1216
Outdoor Dual-band Combiner
CM-AG2-ODx, CM-AG2D-ODx
x=1, 2, 3 or 4, Preconfigured DC/AISG By-pass

698-806MHz 880-960MHz

Electrical Specifications
Frequency Range (MHz) Band1: 698-806 Band2: 880-960
Insertion Loss (dB) ≤0.3
Isolation between Ports (dB) ≥60
Return Loss (dB) ≥20
Maximum Input Power per Port (W) 250
Intermodulation Products (dBc) ≤-153@2x43dBm
Impedance (Ω) 50
DC/AISG transparency By-pass (max. 3000 mA)
Lightning Protection Comply with IEC 61000-4-5; 8kA, 8/20s
MTBF (Hours) ≥500,000

Mechanical Specifications
Model Single Unit Double Units
Dimensions, LxWxH (excluding connectors and
201.5x151x58 / 7.9x5.9x2.3 201.5x151x118 / 7.9x5.9x4.6
mounting bracket) (mm) / (in)
Weight (kg) / (lb) 2.5 / 5.5 5.2 / 11.5
Shipping Dimensions, LxWxH (mm) / (in) 400x250x200 / 15.7x9.8x7.9 410x275x245 / 16.1x10.8x9.6
Shipping Weight (kg) / (lb) 3.8 / 8.4 6.3 / 13.9
RF Connectors 7/16 DIN-Female
Mounting Pole (clamps included for Ф35-125mm pole) or Wall Mounted
Operating Temperature Range (°C) -40 to +65
Operational Humidity (%) ≤100
Environmental Class IP67

Photo & Block Diagram

Single Unit CM-AG2-OD4

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 200
DS-Control:3-0-0 / 1216
Outdoor Dual-band Combiner
CM-AG2-ODx, CM-AG2D-ODx
x=1, 2, 3 or 4, Preconfigured DC/AISG By-pass

698-806MHz 880-960MHz

Outline Drawing

34 6 6 .5

34 6 6 .5

60
20

20
90 151 151
150
58
118

COM C OM
201.5

201.5
334.5

334.5
GND GND
6 9 8 -8 0 6 8 8 0 -9 6 0 6 9 8 -8 0 6 8 8 0 -9 6 0

Single Unit Double Units

Ordering Information
Single Unit Model Double Units Model Connector Type
CM-AG2-ODx* CM-AG2D-ODx* 7/16 DIN Female
CM-AG2-OAx* CM-AG2D-OAx* 4.3-10 Female

* DC/AISG By-pass Optional: x=1,2,3 or 4

1- No DC/AISG By-pass; 2- DC/AISG By-pass@Band1
3- DC/AISG By-pass@Band2 4- Full DC/AISG By-pass

Accessories
Model Quantity Description
00-W331-5016 2 Mounting Kit
KK63020099 2 Hose Clamp, ∅30-125mm

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 201
DS-Control:3-0-0 / 1216
Outdoor Dual-band Combiner
CM-CG2-ODxC, CM-CG2D-ODxC
x=1, 2, 3 or 4, Preconfigured DC/AISG By-pass

824-894MHz 899-960MHz

Electrical Specifications
Frequency Range (MHz) Band1: 824-894 Band2: 899-960
Insertion Loss (dB) ≤1.0
Isolation between Ports (dB) ≥45
Return Loss (dB) ≥20
Maximum Input Power per Port (W) 250
Intermodulation Products (dBc) ≤-155@2x43dBm
Impedance (Ω) 50
DC/AISG transparency By-pass (max. 3000 mA)
Lightning Protection Comply with IEC 61000-4-5; 8kA, 8/20s
MTBF (Hours) ≥500,000

Mechanical Specifications
Model Single Unit Double Units
Dimensions, LxWxH (excluding connectors and
238x220x54 / 9.4x8.7x2.1 238x220x114 / 9.4x8.7x4.5
mounting bracket) (mm) / (in)
Weight (kg) / (lb) 3.5 / 7.7 6.8 / 15.0
Shipping Dimensions, LxWxH (mm) / (in) 415x315x155 / 16.3x12.4x6.1 415x315x220 / 16.3x12.4x8.7
Shipping Weight (kg) / (lb) 4.7 / 10.4 8.3 / 18.3
RF Connectors 7/16 DIN-Female
Mounting Pole (clamps included for Ф35-125mm pole) or Wall Mounted
Operating Temperature Range (°C) -40 to +65
Operational Humidity (%) ≤100
Environmental Class IP67

Photo & Block Diagram

Port 3
DC/AISG Bypass

DC/AISG Bypass

Port 1 Port 2
824-894MHz 899-960MHz

Single Unit CM-CG2-OD4C

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 202
DS-Control:0-0-2 / 1216
Outdoor Dual-band Combiner
CM-CG2-ODxC, CM-CG2D-ODxC
x=1, 2, 3 or 4, Preconfigured DC/AISG By-pass

824-894MHz 899-960MHz

Outline Drawing

74.2

74.2

60
81 141
220 54 220 114

238
238

Single Unit Double Units

Ordering Information
Single Unit Model Double Units Model Connector Type
CM-CG2-ODx*C CM-CG2D-ODx*C 7/16 DIN Female
CM-CG2-OAx*C CM-CG2D-OAx*C 4.3-10 Female

* DC/AISG By-pass Optional: x=1,2,3 or 4

1- No DC/AISG By-pass 2- DC/AISG By-pass@Band1
3- DC/AISG By-pass@Band2 4- Full DC/AISG By-pass

Accessories
Model Quantity Description
00-W331-5016 2 Mounting Kit
KK63020099 2 Hose Clamp, ∅35-125mm

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 203
DS-Control:0-0-2 / 1216
Outdoor Dual-band Combiner
CM-DW2-ODxG, CM-DW2D-ODxG
x=1, 2, 3 or 4, Preconfigured DC/AISG By-pass

1710-1880MHz 1920-2170MHz

Electrical Specifications
Frequency Range (MHz) Band1: 1710-1880 Band2: 1920-2170
Insertion Loss (dB) ≤0.3
Isolation between Ports (dB) ≥50
Return Loss (dB) ≥20
Maximum Input Power per Port (W) 250
Intermodulation Products (dBc) ≤-155@2x43dBm
Impedance (Ω) 50
DC/AISG transparency By-pass (max. 3000 mA)
Lightning Protection Comply with IEC 61000-4-5; 8kA, 8/20s
MTBF (Hours) ≥500,000

Mechanical Specifications
Model Single Unit Double Units
Dimensions, LxWxH (excluding connectors and
210x124x49 / 7.6x4.9x1.9 210x124x124 / 7.6x4.9x4.9
mounting bracket) (mm) / (in)
Weight (kg) / (lb) 1.9 / 4.2 3.9 / 8.6
Shipping Dimensions, LxWxH (mm) / (in) 415x200x130 / 16.3x7.9x5.1 415x200x195 / 16.3x7.9x7.7
Shipping Weight (kg) / (lb) 2.9 / 6.3 5.4 / 11.9
RF Connectors 7/16 DIN-Female
Mounting Pole (clamps included for Ф35-125mm pole) or Wall Mounted
Operating Temperature Range (°C) -40 to +65
Operational Humidity (%) ≤100
Environmental Class IP67

Photo & Block Diagram

Port 3
DC/AISG Bypass

DC/AISG Bypass

Port 1 Port 2
1710-1880MHz 1920-2170MHz

Single Unit CM-DW2-OD4G

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 204
DS-Control:3-0-1 / 1216
Outdoor Dual-band Combiner
CM-DW2-ODxG, CM-DW2D-ODxG
x=1, 2, 3 or 4, Preconfigured DC/AISG By-pass

1710-1880MHz 1920-2170MHz

Outline Drawing
65

65

63
17

124

17
61 112
49 124 124
210
278

210
278
Single Unit Double Units

Ordering Information
Single Unit Model Double Units Model Connector Type
CM-DW2-ODxG* CM-DW2D-ODxG* 7/16 DIN Female
CM-DW2-OAxG* CM-DW2D-OAxG* 4.3-10 Female

* DC/AISG By-pass Optional: x=1, 2, 3 or 4

1- No DC/AISG By-pass 2- DC/AISG By-pass@Band1
3- DC/AISG By-pass@Band2 4- Full DC/AISG By-pass

Accessories
Model Quantity Description
00-W331-5016 2 Mounting Kit
KK63020099 2 Hose Clamp, ∅30-125mm

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 205
DS-Control:3-0-1 / 1216
Outdoor Dual-band Combiner
CM-FK2-ODx, CM-FK2D-ODx
x=1, 2, 3 or 4, Preconfigured DC/AISG By-pass

380-960MHz 1710-2700MHz

Electrical Specifications
Frequency Range (MHz) Band1: 380-960 Band2: 1710-2700
Insertion Loss (dB) ≤0.2
Isolation between Ports (dB) ≥60
Return Loss (dB) ≥20
Maximum Input Power per Port (W) 300
Intermodulation Products (dBc) ≤-155@2x43dBm
Impedance (Ω) 50
DC/AISG transparency By-pass (max. 3000 mA)
Lightning Protection Comply with IEC 61000-4-5; 8kA, 8/20s
MTBF (Hours) ≥500,000

Mechanical Specifications
Model Single Unit Double Units
Dimensions, LxWxH (excluding connectors and
180x110x50 / 7.1x4.3x2.0 180x110x103 / 7.1x4.3x4.1
mounting bracket) (mm) / (in)
Weight (kg) / (lb) 2.0 / 4.4 3.9 / 8.6
Shipping Dimensions, LxWxH (mm) / (in) 405x226x210 / 15.9x8.9x8.3 405x225x275 / 15.9x8.9x10.8
Shipping Weight (kg) / (lb) 3.0 / 6.6 4.9 / 10.8
RF Connectors 7/16 DIN-Female
Mounting Pole (clamps included for Ф35-125mm pole) or Wall Mounted
Operating Temperature Range (°C) -40 to +65
Operational Humidity (%) ≤100
Environmental Class IP67

Photo & Block Diagram

Port 3
DC/AISG Bypass

DC/AISG Bypass

Port 1 Port 2
380-960MHz 1710-2700MHz

Single Unit CM-FK2-OD4

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 206
DS-Control:3-0-6 / 1216
Outdoor Dual-band Combiner
CM-FK2-ODx, CM-FK2D-ODx
x=1, 2, 3 or 4, Preconfigured DC/AISG By-pass

380-960MHz 1710-2700MHz

Outline Drawing
55

55 18.5

53
18.5
82 110 135 110
50 103
309

309
180

180
Single Unit Double Units

Ordering Information
Single Unit Model Double Units Model Connector Type
CM-FK2-ODx* CM-FK2D-ODx* 7/16 DIN Female
CM-FK2-OAx* CM-FK2D-OAx* 4.3-10 Female

* DC/AISG By-pass Optional: x=1, 2, 3 or 4

1- No DC/AISG By-pass 2- DC/AISG By-pass@Band1
3- DC/AISG By-pass@Band2 4- Full DC/AISG By-pass

Accessories
Model Quantity Description
00-W331-5016 2 Mounting Kit
KK63020099 2 Hose Clamp, ∅30-125mm

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 207
DS-Control:3-0-6 / 1216
Outdoor Dual-band Combiner
CM-KY2-ODxB, CM-KY2D-ODxB
x=1, 2, 3 or 4, Preconfigured DC/AISG By-pass

1710-2170MHz 2300-2700MHz

Electrical Specifications
Frequency Range (MHz) Band1: 1710-2170 Band2: 2300-2700
Insertion Loss (dB) ≤0.3
Isolation between Ports (dB) ≥70
Return Loss (dB) ≥20
Maximum Input Power per Port (W) 300
Intermodulation Products (dBc) ≤-155@2x43dBm
Impedance (Ω) 50
DC/AISG transparency By-pass (max. 3000 mA)
Lightning Protection Comply with IEC 61000-4-5; 8kA, 8/20s
MTBF (Hours) ≥500,000

Mechanical Specifications
Model Single Unit Double Units
Dimensions, LxWxH (excluding connectors and
142x121x69 / 5.6x4.8x2.7 142x121x140 / 5.6x4.8x5.5
mounting bracket) (mm) / (in)
Weight (kg) / (lb) 1.7 / 3.7 3.4 / 7.5
Shipping Dimensions, LxWxH (mm) / (in) 350x195x140 / 13.8x7.7x5.5 350x195x210 / 13.8x7.7x8.3
Shipping Weight (kg) / (lb) 2.8 / 6.2 4.6 / 10.1
RF Connectors 7/16 DIN-Female
Mounting Pole (clamps included for Ф35-125mm pole) or Wall Mounted
Operating Temperature Range (°C) -40 to +65
Operational Humidity (%) ≤100
Environmental Class IP67

Photo & Block Diagram

Port 3
DC/AISG Bypass

DC/AISG Bypass

Port 1 Port 2
1710-2170MHz 2300-2700MHz

Single Unit CM-KY2-OD4

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 208
DS-Control:3-0-10 / 1216
Outdoor Dual-band Combiner
CM-KY2-ODxB, CM-KY2D-ODxB
x=1, 2, 3 or 4, Preconfigured DC/AISG By-pass

1710-2170MHz 2300-2700MHz

Outline Drawing

Single Unit Double Units

Ordering Information
Single Unit Model Double Units Model Connector Type
CM-KY2-ODxB* CM-KY2D-ODxB* 7/16 DIN Female
CM-KY2-OAxB* CM-KY2D-OAxB* 4.3-10 Female

* DC/AISG By-pass Optional: x=1,2,3 or 4

1- No DC/AISG By-pass 2- DC/AISG By-pass@Band1
3- DC/AISG By-pass@Band2 4- Full DC/AISG By-pass

Accessories
Model Quantity Description
00-W331-5016 2 Mounting Kit
KK63020099 2 Hose Clamp, ∅30-125mm

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 209
DS-Control:3-0-10 / 1216
Outdoor Dual-band Combiner
CM-MY2-ODx, CM-MY2D-ODx
x=1, 2, 3 or 4, Preconfigured DC/AISG By-pass

806-960/1710-2170MHz 2300-2700MHz

Electrical Specifications
Frequency Range (MHz) Band1: 806-960/1710-2170 Band2: 2300-2700
Insertion Loss (dB) ≤0.3
Isolation between Ports (dB) ≥70
Return Loss (dB) ≥20
Maximum Input Power per Port (W) 250
Intermodulation Products (dBc) ≤-150@2x43dBm
Impedance (Ω) 50
DC/AISG transparency By-pass (max. 3000 mA)
Lightning Protection Comply with IEC 61000-4-5; 8kA, 8/20s
MTBF (Hours) ≥500,000

Mechanical Specifications
Model Single Unit Double Units
Dimensions, LxWxH (excluding connectors and
156x142x58 / 6.1x5.6x2.3 156x142x118 / 6.1x5.6x4.6
mounting bracket) (mm) / (in)
Weight (kg) / (lb) 2.4 / 5.3 4.7 / 10.4
Shipping Dimensions, LxWxH (mm) / (in) 365x265x230 / 14.4x10.4x9.1 405x225x275 / 16.0x8.9x10.8
Shipping Weight (kg) / (lb) 3.4 / 7.5 5.7 / 12.7
RF Connectors 7/16 DIN-Female
Mounting Pole (clamps included for Ф35-125mm pole) or Wall Mounted
Operating Temperature Range (°C) -40 to +65
Operational Humidity (%) ≤95
Environmental Class IP67

Photo & Block Diagram

Port 3
DC/AISG Bypass

DC/AISG Bypass

Port 1 Port 2
806-960/1710-2170MHz 2300-2700MHz

Single Unit CM-MY2-OD4

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 210
DS-Control:3-0-6 / 1216
Outdoor Dual-band Combiner
CM-MY2-ODx, CM-MY2D-ODx
x=1, 2, 3 or 4, Preconfigured DC/AISG By-pass

806-960/1710-2170MHz 2300-2700MHz

Outline Drawing
85

85

60
24

24
90 156 150 156
58 118
275

275
142

142
Single Unit Double Units

Ordering Information
Single Unit Model Double Units Model Connector Type
CM-MY2-ODx* CM-MY2D-ODx* 7/16 DIN Female
CM-MY2-OAx* CM-MY2D-OAx* 4.3-10 Female

* DC/AISG By-pass Optional: x=2,3 or 4

1- No DC/AISG By-pass 2- DC/AISG By-pass@Band1
3- DC/AISG By-pass@Band2 4- Full DC/AISG By-pass

Accessories
Model Quantity Description
00-W331-5016 2 Mounting Kit
KK63020099 2 Hose Clamp, ∅30-125mm

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 211
DS-Control:3-0-6 / 1216
Outdoor Dual-band Combiner
CM-PK2-ODx, CM-PK2D-ODx
x=1, 2, 3 or 4, Preconfigured DC-pass

1850-1910/1930-1990MHz 1710-1755/2110-2155MHz

Electrical Specifications
Frequency Range (MHz) Band1: 1850-1910/1930-1990 Band2: 1710-1755/2110-2155
Insertion Loss (dB) ≤0.3 ≤0.2
Isolation between Ports (dB) ≥50
Return Loss (dB) ≥20
Maximum Input Power per Port (W) 250
Intermodulation Products (dBc) ≤-155@2x43dBm
Impedance (Ω) 50
DC/AISG transparency By-pass (max. 3000 mA)
Lightning Protection Comply with IEC 61000-4-5; 8kA, 8/20s
MTBF (Hours) ≥500,000

Mechanical Specifications
Model Single Unit Double Units
Dimensions, LxWxH (excluding connectors and
167x143x45 / 6.6x5.6x1.8 167x143x108 / 6.6x5.6x4.2
mounting bracket) (mm) / (in)
Weight (kg) / (lb) 2.1 / 4.6 4.3 / 9.5
Shipping Dimensions, LxWxH (mm) / (in) 395x300x215 / 15.6x11.8x8.5 395x300x265 / 15.6x11.8x10.4
Shipping Weight (kg) / (lb) 4.5 / 9.9 6.9 / 15.2
RF Connectors 7/16 DIN-Female
Mounting Pole (clamps included for Ф35-125mm pole) or Wall Mounted
Operating Temperature Range (°C) -40 to +65
Operational Humidity (%) ≤95
Environmental Class IP67

Photo & Block Diagram

Port 3
DC/AISG Bypass

DC/AISG Bypass

Port 1 Port 2
1850-1910/1930-1990MHz 1710-1755/2110-2155MHz

Single Unit CM-PK2-OD4

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 212
DS-Control:1-0-1 / 1216
Outdoor Dual-band Combiner
CM-PK2-ODx, CM-PK2D-ODx
x=1, 2, 3 or 4, Preconfigured DC-pass

1850-1910/1930-1990MHz 1710-1755/2110-2155MHz

Outline Drawing

Single Unit Double Units

Ordering Information
Single Unit Model Double Units Model Connector Type
CM-PK2-ODx* CM-PK2D-ODx* 7/16 DIN Female
CM-PK2-OAx* CM-PK2D-OAx* 4.3-10 Female

* DC/AISG By-pass Optional: x=1,2,3 or 4

1- No DC/AISG By-pass 2- DC/AISG By-pass@Band1
3- DC/AISG By-pass@Band2 4- Full DC/AISG By-pass

Accessories
Model Quantity Description
00-W331-5016 2 Mounting Kit
KK63020099 2 Hose Clamp, ∅30-125mm

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 213
DS-Control:1-0-1 / 1216
Outdoor Dual-band Combiner
CM-TY2-ODx,CM-TY2D-ODx
x=1, 2, 3 or 4, Preconfigured DC-pass

2300-2400MHz 2496-2690MHz

Electrical Specifications
Frequency Range (MHz) Band1: 2300-2400 Band2: 2496-2690
Insertion Loss (dB) ≤0.4
Isolation between Ports (dB) ≥70
Return Loss (dB) ≥20
Maximum Input Power per Port (W) 250
Intermodulation Products (dBc) ≤-155@2x43dBm
Impedance (Ω) 50
DC/AISG transparency By-pass (max. 3000 mA)
Lightning Protection Comply with IEC 61000-4-5; 8kA, 8/20s
MTBF (Hours) ≥500,000

Mechanical Specifications
Model Single Unit Double Units
Dimensions, LxWxH (excluding connectors
130x164x48 / 5.1x6.5x1.9 130x164x98 / 5.1x6.5x3.9
and mounting bracket) (mm) / (in)
Weight (kg) / (lb) 1.2 / 2.6 2.5 / 5.5
Shipping Dimensions, LxWxH (mm) / (in) 300×200×125 / 11.8x7.9x4.9 300×200×190 / 11.8x7.9x7.5
Shipping Weight (kg) / (lb) 2.5 / 5.5 4.5 / 9.9
RF Connectors 7/16 DIN-Female
Mounting Pole (clamps included for Ф35-125mm pole) or Wall Mounted
Operating Temperature Range (°C) -40 to +65
Operational Humidity (%) ≤95
Environmental Class IP67

Photo & Block Diagram

Port 3
DC/AISG Bypass

DC/AISG Bypass

Port 1 Port 2
2300-2400MHz 2496-2690MHz

Single Unit CM-TY2-OD4

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 214
DS-Control:0-0-1 / 1216
Outdoor Dual-band Combiner
CM-TY2-ODx,CM-TY2D-ODx
x=1, 2, 3 or 4, Preconfigured DC-pass

2300-2400MHz 2496-2690MHz

Outline Drawing

Single Unit Double Units

Ordering Information
Single Unit Model Double Units Model Connector Type
CM-TY2-ODx* CM-TY2D-ODx* 7/16 DIN Female
CM-TY2-OAx* CM-TY2D-OAx* 4.3-10 Female

* DC/AISG By-pass Optional: x=1,2,3 or 4

1- No DC/AISG By-pass 2- DC/AISG By-pass@Band1
3- DC/AISG By-pass@Band2 4- Full DC/AISG By-pass

Accessories
Model Quantity Description
00-W331-5016 2 Mounting Kit
KK63020099 2 Hose Clamp, ∅30-125mm

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 215
DS-Control:0-0-1 / 1216
Outdoor Tri-band Combiner
CM-AEJ3-ODx, CM-AEJ3D-ODx
x=1, 2, 3, 4, 5 or 6, Preconfigured DC/AISG By-pass

690-862MHz 880-960MHz 1710-2700MHz

Electrical Specifications
Frequency Range (MHz) Band1: 690-862 Band2: 880-960 Band3: 1710-2700
Insertion Loss (dB) ≤0.5
Isolation between Ports (dB) ≥50
Return Loss (dB) ≥20
Maximum Input Power per Port (W) 250
Intermodulation Products (dBc) ≤-155@2x43dBm
Impedance (Ω) 50
DC/AISG transparency By-pass (max. 3000 mA)
Lightning Protection Comply with IEC 61000-4-5; 8kA, 8/20s
MTBF (Hours) ≥500,000

Mechanical Specifications
Model Single Unit Double Units
Dimensions, LxWxH (excluding connectors and
190x215x54 / 7.5x8.5x2.1 190x215x114 / 7.5x8.5x4.5
mounting bracket) (mm) / (in)
Weight (kg) / (lb) 3.2 / 7.1 6.6 / 14.6
Shipping Dimensions, LxWxH (mm) / (in) 415x315x155 / 16.3x12.4x6.1 415x315x220 / 16.3x12.4x8.7
Shipping Weight (kg) / (lb) 4.6 / 10.8 8.1 / 17.9
RF Connectors 7/16 DIN-Female
Mounting Pole (clamps included for Ф35-125mm pole) or Wall Mounted
Operating Temperature Range (°C) -40 to +65
Operational Humidity (%) ≤100
Environmental Class IP67

Photo & Block Diagram

Port 4
DC/AISG Bypass

DC/AISG Bypass

DC/AISG Bypass

Port 1 Port 2 Port 3

690-862MHz 880-960MHz 1710-2700MHz

Single Unit CM-AEJ3-OD6

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 216
DS-Control:0-0-0 / 1216
Outdoor Tri-band Combiner
CM-AEJ3-ODx, CM-AEJ3D-ODx
x=1, 2, 3, 4, 5 or 6, Preconfigured DC/AISG By-pass

690-862MHz 880-960MHz 1710-2700MHz

Outline Drawing

63.4 64.9

63.4 64.9

60
81 141
215 54 215 114
190

190
Single Unit Double Units

Ordering Information
Single Unit Model Double Units Model Connector Type
CM-AEJ3-ODx* CM-AEJ3D-ODx* 7/16 DIN Female
CM-AEJ3-OAx* CM-AEJ3D-OAx* 4.3-10 Female

* DC/AISG By-pass Optional: x=1,2… or 6

1- No DC/AISG By-pass 2- DC/AISG By-pass@Band1 3- DC/AISG By-pass@Band2
4- DC/AISG By-pass@Band3 5- DC/AISG By-pass@Band1 and Band2 6- Full DC/AISG By-pass

Accessories
Model Quantity Description
00-W331-5016 2 Mounting Kit
KK63020099 2 Hose Clamp, ∅30-125mm

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 217
DS-Control:0-0-0 / 1216
Outdoor Tri-band Combiner
CM-DWY3-ODxB, CM-DWY3D-ODxB
x=1, 2, 3, 4, 5, 6, Preconfigured DC/AISG By-pass

1710-1880MHz 1920-2170MHz 2300-2700MHz

Electrical Specifications
Frequency Range (MHz) Band1: 1710-1880 Band2: 1920-2170 Band3: 2300-2700
Insertion Loss (dB) ≤0.3
Isolation between Ports (dB) ≥50
Return Loss (dB) ≥20
Maximum Input Power per Port (W) 250
Intermodulation Products (dBc) ≤-155@2x43dBm
Impedance (Ω) 50
DC/AISG transparency By-pass (max. 3000 mA)
Lightning Protection Comply with IEC 61000-4-5; 8kA, 8/20s
MTBF (Hours) ≥500,000

Mechanical Specifications
Model Single Unit Double Units
Dimensions, LxWxH (excluding connectors and
240x210x51.5 / 9.4x8.3x2.0 240x210x104.5 / 9.4x8.3x4.1
mounting bracket) (mm) / (in)
Weight (kg) / (lb) 4.1 / 9.0 8.0 / 17.6
Shipping Dimensions, LxWxH (mm) / (in) 415x315x155 / 16.3x12.4x6.1 415x315x220 / 16.3x12.4x8.7
Shipping Weight (kg) / (lb) 5.4 / 11.9 9.6 / 21.2
RF Connectors 7/16 DIN-Female
Mounting Pole (clamps included for Ф35-125mm pole) or Wall Mounted
Operating Temperature Range (°C) -40 to +65
Operational Humidity (%) ≤100
Environmental Class IP67

Photo & Block Diagram

Port 4
DC/AISG Bypass
DC/AISG Bypass

DC/AISG Bypass

Port 1 Port 2 Port 3

1710-1880MHz 1920-2170MHz 2300-2700MHz

Single Unit CM-DWY3-OD6

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 218
DS-Control:0-0-1 / 1216
Outdoor Tri-band Combiner
CM-DWY3-ODxB, CM-DWY3D-ODxB
x=1, 2, 3, 4, 5, 6, Preconfigured DC/AISG By-pass

1710-1880MHz 1920-2170MHz 2300-2700MHz

Outline Drawing

59 50

53
59 50

18.5

18.5
7 8 .5 1 3 1 .5
5 1 .5 1 0 4 .5 210
210
240

240
Single Unit Double Units

Ordering Information
Single Unit Model Double Units Model Connector Type
CM-DWY3-ODxB* CM-DWY3D-ODxB* 7/16 DIN Female
CM-DWY3-OAxB* CM-DWY3D-OAxB* 4.3-10 Female

* DC/AISG By-pass Optional: x=1,2,3,4,5,6

1- No DC/AISG By-pass 2- DC/AISG By-pass@Band1 3- DC/AISG By-pass@Band2
4- DC/AISG By-pass@Band3 5- DC/AISG By-pass@Band1 and Band2 6- Full DC/AISG By-pass

Accessories
Model Quantity Description
00-W331-5016 2 Mounting Kit
KK63020099 2 Hose Clamp, ∅30-125mm

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 219
DS-Control:0-0-1 / 1216
Outdoor Tri-band Combiner
CM-FDW3-ODx, CM-FDW3D-ODx
x=1, 2, 3, 4 or 6, Preconfigured DC/AISG By-pass

380-960MHz 1710-1880MHz 1920-2170MHz

Electrical Specifications
Frequency Range (MHz) Band1: 380-960 Band2: 1710-1880 Band3: 1920-2170
Insertion Loss (dB) ≤0.3
Isolation between Ports (dB) ≥50
Return Loss (dB) ≥20
Maximum Input Power per Port (W) 250
Intermodulation Products (dBc) ≤-155@2x43dBm
Impedance (Ω) 50
DC/AISG transparency By-pass (max. 3000 mA)
Lightning Protection Comply with IEC 61000-4-5; 8kA, 8/20s
MTBF (Hours) ≥500,000

Mechanical Specifications
Model Single Unit Double Units
Dimensions, LxWxH (excluding connectors and
220x180x50 / 8.7x7.1x2.0 220x180x103 / 8.7x7.1x4.1
mounting bracket) (mm) / (in)
Weight (kg) / (lb) 3.0 / 6.6 5.8 / 12.8
Shipping Dimensions, LxWxH (mm) / (in) 464x364x184 / 18.3x14.3x7.2 465x365x250 / 18.3x14.4x9.8
Shipping Weight (kg) / (lb) 4.6 / 10.1 7.4 / 16.3
RF Connectors 7/16 DIN-Female
Mounting Pole (clamps included for Ф35-125mm pole) or Wall Mounted
Operating Temperature Range (°C) -40 to +65
Operational Humidity (%) ≤95
Environmental Class IP67

Photo & Block Diagram

Port 4
DC/AISG Bypass
DC/AISG Bypass

DC/AISG Bypass

Port 1 Port 2 Port 3

380-960MHz 1710-1880MHz 1920-2170MHz

Single Unit CM-FDW3-OD6

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 220
DS-Control:3-0-2 / 1216
Outdoor Tri-band Combiner
CM-FDW3-ODx, CM-FDW3D-ODx
x=1, 2, 3, 4 or 6, Preconfigured DC/AISG By-pass

380-960MHz 1710-1880MHz 1920-2170MHz

Outline Drawing

52 61
16.5

82 18 0
50

103
22 0
53 1 6 .5

61
349
220

180
212
52
42.5

339

Single Unit Double Units

Ordering Information
Single Unit Model Double Units Model Connector Type
CM-FDW3-ODx* CM-FDW3D-ODx* 7/16 DIN Female
CM-FDW3-OAx* CM-FDW3D-OAx* 4.3-10 Female

* DC/AISG By-pass Optional: x=1,2,3,4 or 6

1- No DC/AISG By-pass 2- DC/AISG By-pass@Band1 3- DC/AISG By-pass@Band2
4- DC/AISG By-pass@Band3 6- Full DC/AISG By-pass

Accessories
Model Quantity Description
00-W331-5016 2 Mounting Kit
KK63020099 2 Hose Clamp, ∅30-125mm

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 221
DS-Control:3-0-2 / 1216
Outdoor Tri-band Combiner
CM-FKY3-ODx, CM-FKY3D-ODx
x=1, 2, 3, 4, 6, Preconfigured DC/AISG By-pass

380-960MHz 1710-2170MHz 2300-2690MHz

Electrical Specifications
Frequency Range (MHz) Band1: 380-960 Band2: 1710-2170 Band3: 2300-2690
Insertion Loss (dB) ≤0.3
≥60@380-960 / 1710-2170MHz
Isolation between Ports (dB) ≥60@380-960 / 2300-2690MHz
≥55@1710-2170 / 2300-2690MHz
Return Loss (dB) ≥20
Maximum Input Power per Port (W) 250
Intermodulation Products (dBc) ≤-155@2x43dBm
Impedance (Ω) 50
DC/AISG transparency By-pass (max. 3000 mA)
Lightning Protection Comply with IEC 61000-4-5; 8kA, 8/20s
MTBF (Hours) ≥500,000

Mechanical Specifications
Model Single Unit Double Units
Dimensions, LxWxH (excluding connectors and
187x158x50 / 7.4x6.2x2.0 187x158x103 / 7.4x6.2x4.1
mounting bracket) (mm) / (in)
Weight (kg) / (lb) 2.6 / 5.7 5.2 / 11.5
Shipping Dimensions, LxWxH (mm) / (in) 392x247x185 / 15.4x9.7x7.3 400x300x220 / 15.7x11.8x8.7
Shipping Weight (kg) / (lb) 3.5 / 7.7 6.1 / 13.4
RF Connectors 7/16 DIN-Female
Mounting Pole (clamps included for Ф35-125mm pole) or Wall Mounted
Operating Temperature Range (°C) -40 to +65
Operational Humidity (%) ≤100
Environmental Class IP67

Photo & Block Diagram

Port 4
DC/AISG Bypass
DC/AISG Bypass

DC/AISG Bypass

Port 1 Port 2 Port 3

380-960MHz 1710-2170MHz 2300-2690MHz

Single Unit CM-FKY3-OD6

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 222
DS-Control:3-0-4 / 1216
Outdoor Tri-band Combiner
CM-FKY3-ODx, CM-FKY3D-ODx
x=1, 2, 3, 4, 6, Preconfigured DC/AISG By-pass

380-960MHz 1710-2170MHz 2300-2690MHz

Outline Drawing

54.5 52.5 25.5

53
54.5 52.5 25.5

82 135

50 103

GN D C OM
GND COM
321
187

321
187
380- 960 1710- 2170 2300- 2690
380-960 1710-2170 2300-2690

158
158

Single Unit Double Units

Ordering Information
Single Unit Model Double Units Model Connector Type
CM-FKY3-ODx* CM-FKY3D-ODx* 7/16 DIN Female
CM-FKY3-OAx* CM-FKY3D-OAx* 4.3-10 Female

* DC/AISG By-pass Optional: x=1,2,3,4,6

1- No DC/AISG By-pass 2- DC/AISG By-pass@Band1 3- DC/AISG By-pass@Band2
4- DC/AISG By-pass@Band3 6- Full DC/AISG By-pass

Accessories
Model Quantity Description
00-W331-5016 2 Mounting Kit
KK63020099 2 Hose Clamp, ∅30-125mm

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 223
DS-Control:3-0-4 / 1216
Outdoor Tri-band Combiner
CM-KTY3-ODx
x=1, 2, 3, 4 or 6, Preconfigured DC/AISG By-pass

1710-2170MHz 2300-2390MHz 2500-2690MHz

Electrical Specifications
Frequency Range (MHz) Band1: 1710-2170 Band2: 2300-2390 Band3: 2500-2690
Insertion Loss (dB) ≤0.4
Isolation between Ports (dB) ≥70
Return Loss (dB) ≥20
Maximum Input Power per Port (W) 250
Intermodulation Products (dBc) ≤-155@2x43dBm
Impedance (Ω) 50
DC/AISG transparency By-pass (max. 3000 mA)
Lightning Protection Comply with IEC 61000-4-5; 8kA, 8/20s
MTBF (Hours) ≥500,000

Mechanical Specifications
Model Single Unit
Dimensions, LxWxH (excluding connectors and
146x138x44.5 / 5.7x5.4x1.8
mounting bracket) (mm) / (in)
Weight (kg) / (lb) 1.9 / 4.2
Shipping Dimensions, LxWxH (mm) / (in) 345x215x220 / 13.6x8.5x8.7
Shipping Weight (kg) / (lb) 2.8 / 6.2
RF Connectors 7/16 DIN-Female
Mounting Pole (clamps included for Ф35-125mm pole) or Wall Mounted
Operating Temperature Range (°C) -40 to +65
Operational Humidity (%) ≤100
Environmental Class IP67

Photo & Block Diagram

Port 4
DC/AISG Bypass

Port 1 Port 2 Port 3

1710-2170MHz 2300-2390MHz 2500-2690MHz

Single Unit CM-KTY3-OD4

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 224
DS-Control:3-0-5 / 1216
Outdoor Tri-band Combiner
CM-KTY3-ODx
x=1, 2, 3, 4 or 6, Preconfigured DC/AISG By-pass

1710-2170MHz 2300-2390MHz 2500-2690MHz

Outline Drawing

51 51

146
44.5
274

135

Single unit

Ordering Information
Single Unit Model Double Units Model Connector Type
CM-KTY3-ODx* / 7/16 DIN Female
CM-KTY3-OAx* / 4.3-10 Female

* DC/AISG By-pass Optional: x=1,2,3,4 or 6

1- No DC/AISG By-pass 2- DC/AISG By-pass@Band1 3- DC/AISG By-pass@Band2
4- DC/AISG By-pass@Band3 6- Full DC/AISG By-pass

Accessories
Model Quantity Description
00-W331-5016 2 Mounting Kit
KK63020099 2 Hose Clamp, ∅30-125mm

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 225
DS-Control:3-0-5 / 1216
Outdoor Tri-band Combiner
CM-PPK3D-ODx
x=1, 2, 3, 4 or 6, Preconfigured DC/AISG By-pass

1850-1875/1930-1955MHz 1885-1910/1965-1990MHz 1710-1755/2110-2155MHz

Electrical Specifications
Frequency Range (MHz) Band1: Band2: Band3:
1850-1875/1930-1955 1885-1910/1965-1990 1710-1755/2110-2155
Insertion Loss (dB) ≤0.7 ≤0.7 ≤0.3
Isolation between Ports (dB) ≥30@Band2; ≥50@Band3 ≥30@Band1; ≥50@Band3 ≥50
Return Loss (dB) ≥20
Maximum Input Power per Port (W) 100 100 200
Intermodulation Products (dBc) ≤-155@2x43dBm
Impedance (Ω) 50
DC/AISG transparency By-pass (max. 3000 mA)
Lightning Protection Comply with IEC 61000-4-5; 8kA, 8/20s
MTBF (Hours) ≥500,000

Mechanical Specifications
Model Single Unit Double Units
Dimensions, LxWxH (excluding connectors and
213x196x92 / 8.4x7.7x3.6 213x196x194 / 8.4x7.7x7.6
mounting bracket) (mm) / (in)
Weight (kg) / (lb) 5.0 / 11.0 10.5 / 23.1
Shipping Dimensions, LxWxH (mm) / (in) 385x325x150 / 15.2x12.8x5.9 505x335x375 / 19.9x13.2x14.8
Shipping Weight (kg) / (lb) 5.6 / 12.3 11.5 / 25.4
RF Connectors 7/16 DIN-Female
Mounting Pole (clamps included for Ф35-125mm pole) or Wall Mounted
Operating Temperature Range (°C) -40 to +65
Operational Humidity (%) ≤100
Environmental Class IP67

Photo & Block Diagram

Port 4
DC/AISG Bypass

DC/AISG Bypass

DC/AISG Bypass

Port 1 Port 2 Port 3

1850-1875/1930-1955MHz 1885-1910/1965-1990MHz 1710-1755/2110-2155MHz

Double Unit CM-PPK3-OD6

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 226
DS-Control:1-0-1 / 1216
Outdoor Tri-band Combiner
CM-PPK3D-ODx
x=1, 2, 3, 4 or 6, Preconfigured DC/AISG By-pass

1850-1875/1930-1955MHz 1885-1910/1965-1990MHz 1710-1755/2110-2155MHz

Outline Drawing

1850-1875 1885-1910 1710-1755

1930-1955 1965-1990

2110-2155

1850-1875 1885-1910 1710-1755

1930-1955 1965-1990

2110-2155
194
196

213
245

Double Unit

Ordering Information
Single Unit Model Double Units Model Connector Type
/ CM-PPK3D-ODx* 7/16 DIN Female
/ CM-PPK3D-OAx* 4.3-10 Female

* DC/AISG By-pass Optional: x=1,2,3,4 or 6

1- No DC/AISG By-pass 2- DC/AISG By-pass@Band1 3- DC/AISG By-pass@Band2
4- DC/AISG By-pass@Band3 6- Full DC/AISG By-pass

Accessories
Model Quantity Description
00-W331-5016 2 Mounting Kit
KK63020099 2 Hose Clamp, ∅30-125mm

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 227
DS-Control:1-0-1 / 1216
Outdoor Quad-band Combiner
CM-DWTY4-ODx, CM-DWTY4D-ODx
x=1, 2, 3, 4, 5 or 8, Preconfigured DC/AISG By-pass

1710-1880MHz 1920-2170MHz 2300-2390MHz 2500-2690MHz

Electrical Specifications
Frequency Range (MHz) Band1: 1710-1880 Band2: 1920-2170 Band3: 2300-2390 Band4: 2500-2690
Insertion Loss (dB) ≤0.6 (0.5,typ)
Isolation between Ports (dB) ≥70
Return Loss (dB) ≥20
Maximum Input Power per Port (W) 250
Intermodulation Products (dBc) ≤-155@2x43dBm
Impedance (Ω) 50
DC/AISG transparency By-pass (max. 3000 mA)
Lightning Protection Comply with IEC 61000-4-5; 8kA, 8/20s
MTBF (Hours) ≥500,000

Mechanical Specifications
Model Single Unit Double Units
Dimensions, LxWxH (excluding connectors and
203x260x54 / 8.0x10.2x2.1 203x260x111 / 8.0x10.2x4.4
mounting bracket) (mm) / (in)
Weight (kg) / (lb) 3.9 / 8.6 7.6 / 16.8
Shipping Dimensions, LxWxH (mm) / (in) 464x364x184 / 18.3x14.3x7.2 415x365x220 / 16.3x14.4x8.7
Shipping Weight (kg) / (lb) 5.5 / 12.1 9.0 / 19.8
RF Connectors 7/16 DIN-Female
Mounting Pole (clamps included for Ф35-125mm pole) or Wall Mounted
Operating Temperature Range (°C) -40 to +65
Operational Humidity (%) ≤100
Environmental Class IP67

Photo & Block Diagram

DC/AISG Bypass

DC/AISG Bypass

DC/AISG Bypass

DC/AISG Bypass

Single Unit CM-DWTY4-OD8

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 228
DS-Control:0-0-3 / 1216
Outdoor Quad-band Combiner
CM-DWTY4-ODx, CM-DWTY4D-ODx
x=1, 2, 3, 4, 5 or 8, Preconfigured DC/AISG By-pass

1710-1880MHz 1920-2170MHz 2300-2390MHz 2500-2690MHz

Outline Drawing

33 66 67 61

33 66 67 61

57
16.5

16.5
81 138
54 111
260 260
203

203
Single Unit Double Units

Ordering Information
Single Unit Model Double Units Model Connector Type
CM-DWTY4-ODx* CM-DWTY4D-ODx* 7/16 DIN Female
CM-DWTY4-OAx* CM-DWTY4D-OAx* 4.3-10 Female

* DC/AISG By-pass Optional: x=1,2,3,4,5 or 8

1- No DC/AISG By-pass 2- DC/AISG By-pass@Band1 3- DC/AISG By-pass@Band2
4- DC/AISG By-pass@Band3 5- DC/AISG By-pass@Band4 8- Full DC/AISG By-pass

Accessories
Model Quantity Description
00-W331-5016 2 Mounting Kit
KK63020099 2 Hose Clamp, ∅30-125mm

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 229
DS-Control:0-0-3 / 1216
Outdoor Quad-band Combiner
CM-FDWY4-ODxB, CM-FDWY4D-ODxB
x=1, 2, 3, 4, 5 or 8, Preconfigured DC/AISG By-pass

380-960MHz 1710-1880MHz 1920-2170MHz 2300-2690MHz

Electrical Specifications
Frequency Range (MHz) Band1: 380-960 Band2: 1710-1880 Band3: 1920-2170 Band4: 2300-2690
Insertion Loss (dB) ≤0.3
Isolation between Ports (dB) ≥50
Return Loss (dB) ≥20
Maximum Input Power per Port (W) 250
Intermodulation Products (dBc) ≤-155@2x43dBm
Impedance (Ω) 50
DC/AISG transparency By-pass (max. 3000 mA)
Lightning Protection Comply with IEC 61000-4-5; 8kA, 8/20s
MTBF (Hours) ≥500,000

Mechanical Specifications
Model Single Unit Double Units
Dimensions, LxWxH (excluding connectors and
240x210x51.5 / 9.4x8.3x2.0 240x210x104.5 / 9.4x8.3x4.1
mounting bracket) (mm) / (in)
Weight (kg) / (lb) 4.1 / 9.0 8.0 / 17.6
Shipping Dimensions, LxWxH (mm) / (in) 415x315x155 / 16.3x12.4x6.1 415x315x220 / 16.3x12.4x8.7
Shipping Weight (kg) / (lb) 5.4 / 11.9 9.6
RF Connectors 7/16 DIN-Female
Mounting Pole (clamps included for Ф35-125mm pole) or Wall Mounted
Operating Temperature Range (°C) -40 to +65
Operational Humidity (%) ≤100
Environmental Class IP67

Photo & Block Diagram

Port 5
DC/AISG Bypass

DC/AISG Bypass

DC/AISG Bypass

DC/AISG Bypass

Port 1 Port 2 Port 3 Port 4

380-960MHz 1710-1880MHz 1920-2170MHz 2300-2690MHz

Single Unit CM-FDWY4-OD8

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 230
DS-Control:0-0-1 / 1216
Outdoor Quad-band Combiner
CM-FDWY4-ODxB, CM-FDWY4D-ODxB
x=1, 2, 3, 4, 5 or 8, Preconfigured DC/AISG By-pass

380-960MHz 1710-1880MHz 1920-2170MHz 2300-2690MHz

Outline Drawing

59 50 50

53
59 50 50
18.5

18.5
78.5 131.5
51.5 210 104.5 210
240

240
Single Unit Double Units

Ordering Information
Single Unit Model Double Units Model Connector Type
CM-FDWY4-ODxB* CM-FDWY4D-ODxB* 7/16 DIN Female
CM-FDWY4-OAxB* CM-FDWY4D-OAxB* 4.3-10 Female

* DC/AISG By-pass Optional: x=1,2,3,4,5 or 8

1- No DC/AISG By-pass 2- DC/AISG By-pass@Band1 3- DC/AISG By-pass@Band2
4- DC/AISG By-pass@Band3 5- DC/AISG By-pass@Band4 8- Full DC/AISG By-pass

Accessories
Model Quantity Description
00-W331-5016 2 Mounting Kit
KK63020099 2 Hose Clamp, ∅30-125mm

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 231
DS-Control:0-0-1 / 1216
Outdoor Penta-band Combiner
CM-ADWTY5-ODx
x=1, 2, 3, 4, 5 or 6, Preconfigured DC/AISG By-pass

678-960MHz 1710-1880MHz 1920-2170MHz 2300-2390MHz 2500-2690MHz

Electrical Specifications
Frequency Range (MHz) Band1: Band2: Band3: Band4: Band5:
678-960 1710-1880 1920-2170 2300-2390 2500-2690
Insertion Loss (dB) ≤0.2 ≤0.4 ≤0.4 ≤0.4 ≤0.4
Isolation between Ports (dB) ≥50
Return Loss (dB) ≥20
Maximum Input Power per Port (W) 250
Intermodulation Products (dBc) ≤-155@2x43dBm
Impedance (Ω) 50
DC/AISG transparency By-pass (max. 3000 mA)
Lightning Protection Comply with IEC 61000-4-5; 8kA, 8/20s
MTBF (Hours) ≥500,000

Mechanical Specifications
Dimensions, LxWxH (excluding connectors and
260x240x50 / 9.4x8.3x2.0
mounting bracket) (mm) / (in)
Weight (kg) / (lb) 4.0 / 8.8
Shipping Dimensions, LxWxH (mm) / (in) 464x364x184 / 18.3x14.3x7.2
Shipping Weight (kg) / (lb) 5.3 / 11.7
RF Connectors 7/16 DIN-Female
Mounting Pole (clamps included for Ф35-125mm pole) or Wall Mounted
Operating Temperature Range (°C) -40 to +65
Operational Humidity (%) ≤100
Environmental Class IP67

Photo & Block Diagram

Port 6

s
DC/AISG Bypass

Port 1 Port 2 Port 3 Port 4 Port 5

678-960MHz 1710-1880MHz 1920-2170MHz 2300-2390MHz 2500-2690MHz

Single Unit CM-ADWTY5-OD6

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 232
DS-Control:2-0-4 / 1216
Outdoor Penta-band Combiner
CM-ADWTY5-ODx
x=1, 2, 3, 4, 5 or 6, Preconfigured DC/AISG By-pass

678-960MHz 1710-1880MHz 1920-2170MHz 2300-2390MHz 2500-2690MHz

Outline Drawing

47 52 52 61

18.5
84.5
52.5

COM
GND
240
369

2500-2690 678-960
2300-2390 1920-2170 1710-1880

260

Single Unit

Ordering Information
Single Unit Model Double Units Model Connector Type
CM-ADWTY5-ODx* / 7/16 DIN Female
CM- ADWTY5-OAx* / 4.3-10 Female

* DC/AISG By-pass Optional: x=1,2,3,4,5,6 or 10

1- No DC/AISG By-pass 2- DC/AISG By-pass@Band1 3- DC/AISG By-pass@Band2
4- DC/AISG By-pass@Band3 5- DC/AISG By-pass@Band4 6- DC/AISG By-pass@Band5
10- Full DC/AISG By-pass

Accessories
Model Quantity Description
00-W331-5016 2 Mounting Kit
KK63020099 2 Hose Clamp, ∅30-125mm

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 233
DS-Control:2-0-4 / 1216
Outdoor Dual-band Combiner
CM-W2-ODxA, CM-W2D-ODxA
x=1, 2, 3 or 4, Preconfigured DC-pass

1920-1925/2110-2115MHz 1950-1965/2140-2155MHz

cElectrical Specifications
Frequency Range (MHz) Band1: 1920-1925/2110-2115 Band2: 1950-1965/2140-2155
Insertion Loss (dB) ≤0.4
Isolation between Ports (dB) ≥40
Return Loss (dB) ≥20
Maximum Input Power per Port (W) 300
Intermodulation Products (dBc) ≤-155@2x43dBm
Impedance (Ω) 50
DC/AISG transparency By-pass (max. 3000 mA)
Lightning Protection Comply with IEC 61000-4-5; 8kA, 8/20s
MTBF (Hours) ≥500,000

Mechanical Specifications
Model Single Unit Double Units
Dimensions, LxWxH (excluding connectors and
230x150x48 / 9.1x5.9x1.9 230x150x76 / 9.1x5.9x3.0
mounting bracket) (mm) / (in)
Weight (kg) / (lb) 2.5 / 5.5 4.4 / 9.7
Shipping Dimensions, LxWxH (mm) / (in) 315x315x155 / 12.4x12.4x6.1 385×325×180 / 15.2x12.8x7.1
Shipping Weight (kg) / (lb) 3.2 / 7.1 5.2 / 11.5
RF Connectors 7/16 DIN-Female
Mounting Pole (clamps included for Ф35-125mm pole)
Operating Temperature Range (°C) -40 to +65
Operational Humidity (%) ≤95
Environmental Class IP67

Photo & Block Diagram

Port 3
DC/AISG Bypass

DC/AISG Bypass

Port 1 Port 2
1920-1925/2110-2115MHz 1950-1965/2140-2155MHz

Single Unit CM-W2-OD4A

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 234
DS-Control:0-0-4 / 1216
Outdoor Dual-band Combiner
CM-W2-ODxA, CM-W2D-ODxA
x=1, 2, 3 or 4, Preconfigured DC-pass

1920-1925/2110-2115MHz 1950-1965/2140-2155MHz

Outline Drawing
48

76
230 230

COM
150

150
1920-1925 1950-1965
2110-2115 2140-2155

Single Unit Double Units

Ordering Information
Single Unit Model Double Units Model Connector Type

CM-W2-ODxA* CM-W2D-ODxA* 7/16 DIN Female

CM-W2-OAxA* CM-W2D-OAxA* 4.3-10 Female

* DC/AISG By-pass Optional: x=1,2,3 or 4

1- No DC/AISG By-pass 2- DC/AISG By-pass@Band1
3- DC/AISG By-pass@Band2 4- Full DC/AISG By-pass

Accessories
Model Quantity Description
00-W331-5016 2 Mounting Kit
KK63020099 2 Hose Clamp, ∅30-125mm

Tuning Examples

1930 1935 1960 1975

Uplink Band1 25M Band2

2120 2125 2150 2165

Downlink Band1 25M Band2

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 235
DS-Control:0-0-4 / 1216
Outdoor Dual-band Combiner
CM-Y2-ODxB, CM-Y2D-ODxB
x=1, 2, 3 or 4, Preconfigured DC-pass

2515-2535/2635-2655MHz 2550-2570/2670-2690MHz

Electrical Specifications
Frequency Range (MHz) Band1: 2515-2535/2635-2655 Band2: 2550-2570/2670-2690
Insertion Loss (dB) ≤0.9
Isolation between Ports (dB) ≥30
Return Loss (dB) ≥20
Maximum Input Power per Port (W) 200
Intermodulation Products (dBc) ≤-150@2x43dBm
Impedance (Ω) 50
DC/AISG transparency By-pass (max. 3000 mA)
Lightning Protection Comply with IEC 61000-4-5; 8kA, 8/20s
MTBF (Hours) ≥500,000

Mechanical Specifications
Model Single Unit Double Units
Dimensions, LxWxH (excluding connectors and
254x166x47 / 10.0x6.5x1.9 254x166x100 / 10.0x6.5x3.9
mounting bracket) (mm) / (in)
Weight (kg) / (lb) 2.6 / 5.7 5.2 / 11.5
Shipping Dimensions, LxWxH (mm) / (in) 395×300×215 / 15.6x11.8x8.5 415×315×235 / 16.3x12.4x9.3
Shipping Weight (kg) / (lb) 4.6 / 10.1 8.0 / 17.6
RF Connectors 7/16 DIN-Female
Mounting Pole (clamps included for Ф35-125mm pole)
Operating Temperature Range (°C) -10 to +60
Operational Humidity (%) ≤100
Environmental Class IP67

Photo & Block Diagram

Port 3
DC/AISG Bypass

DC/AISG Bypass

Port 1 Port 2
2515-2535/2635-2655MHz 2550-2570/2670-2690MHz

Single Unit CM-Y2-OD4B

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 236
DS-Control:0-0-3 / 1216
Outdoor Dual-band Combiner
CM-Y2-ODxB, CM-Y2D-ODxB
x=1, 2, 3 or 4, Preconfigured DC-pass

2515-2535/2635-2655MHz 2550-2570/2670-2690MHz

Outline Drawing
118.8

118.8

53
16.5

16.5
79 254 132 254
47 100

299
299

166
166

Single Unit Double Units

Ordering Information
Single Unit Model Double Units Model Connector Type
CM-Y2-ODxB* CM-Y2D-ODxB* 7/16 DIN Female
CM-Y2-OAxB* CM-Y2D-OAxB* 4.3-10 Female

* DC/AISG By-pass Optional: x=1,2,3 or 4

1- No DC/AISG By-pass 2- DC/AISG By-pass@Band1
3- DC/AISG By-pass@Band2 4- Full DC/AISG By-pass

Accessories
Model Quantity Description
00-W331-5016 2 Mounting Kit
KK63020099 2 Hose Clamp, ∅30-125mm

Tuning Example

2500 2520 2535 2555

Uplink Band1 15M Band2

2620 2640 2655 2675

Downlink Band1 15M Band2

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 237
DS-Control:0-0-3 / 1216
2:1 Hybrid Combiner
COM-BD21ODN9
698-2700MHz

Electrical Specifications
Frequency Range (MHz) Band1: 698-2700 Band2: 698-2700
Coupling Attenuation (dB) 3.00.6@698-806MHz; 3.00.5@806-2700MHz
Isolation between Ports (dB) ≥25
Return Loss (dB) ≥19
Maximum Input Power per Port (W) 100
Intermodulation Products (dBc) ≤-155@2x43dBm
Impedance (Ω) 50
DC/AISG transparency By-pass (max. 3000 mA)
Lightning Protection Comply with IEC 61000-4-5; 8kA, 8/20s
MTBF (Hours) ≥500,000

Mechanical Specifications
Dimensions, LxWxH (excluding connectors and
270x190x86.6 / 10.6x7.5x3.4
mounting bracket) (mm) / (in)
Weight (kg) / (lb) 4.7 / 10.4
Shipping Dimensions, LxWxH (mm) / (in) 440x290x250 / 17.3x11.4x9.8
Shipping Weight (kg) / (lb) 6.4 / 14.1
RF Connectors 7/16 DIN-Female
Mounting Pole (clamps included for Ф35-125mm pole) or Wall Mounted
Operating Temperature Range (°C) -40 to +65
Operational Humidity (%) ≤95
Environmental Class IP66

Photo & Block Diagram

Port3

Load

DC/AISG
bypass

Hybrid

Port1 Port2

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 238
DS-Control:1-0-2 / 1216
2:1 Hybrid Combiner
COM-BD21ODN9
698-2700MHz

Outline Drawing

114
87 190

270

Accessories
Model Quantity Description
00-W331-5016 2 Mounting Kit
KK63020099 2 Hose Clamp, ∅30-125mm

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 239
DS-Control:1-0-2 / 1216
Band Pass Filter
FP-G70-OD01,FP-G70D-OD01
890-960MHz

Electrical Specifications
Frequency Range (MHz) Band1: 890-960
Insertion Loss (dB) ≤2.1@890-915MHz (typ. 0.7); ≤0.3@935-960MHz
Out of Band Rejection (dB) ≥35@885-886.8MHz; ≥50@790-885MHz
Return Loss (dB) ≥20
Maximum Input Power (W) 200
Intermodulation Products (dBc) ≤-150@2x43dBm
Impedance (Ω) 50
DC/AISG transparency By-pass (max. 3000 mA)
Lightning Protection Comply with IEC 61000-4-5; 8kA, 8/20s
MTBF (Hours) ≥500,000

Mechanical Specifications
Model Single Unit Double Units
Dimensions, LxWxH (excluding connectors and
310x124x58 / 12.2x4.9x2.3 310x124x124 / 12.2x4.9x4.9
mounting bracket) (mm) / (in)
Weight (kg) / (lb) 2.7 / 6.0 5.2 / 11.5
Shipping Dimensions, LxWxH (mm) / (in) 500x220x220 / 19.7x8.7x8.7 500x220x450 / 19.7x8.7x8.7
Shipping Weight (kg) / (lb) 4.2 / 9.3 7.0 / 15.4
RF Connectors 7/16 DIN-Female
Mounting Pole (clamps included for Ф35-125mm pole) or Wall Mounted
Operating Temperature Range (°C) -20 to +65
Operational Humidity (%) ≤100
Environmental Class IP67

Photo & Block Diagram

DC/AISG Bypass

Port 1 Port 2

Single Unit FP-G70-OD01

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 240
DS-Control:1-0-1 / 1216
Band Pass Filter
FP-G70-OD01,FP-G70D-OD01
890-960MHz

Outline Drawing

68
24
22

90 124 160 124

58 124
310
440

310
440
Single Unit Double Units

Ordering Information
Single Unit Model Double Units Model Connector Type
FP-G70-OD01 FP-G70D-OD01 7/16 DIN Female
FP-G70-OA01 FP-G70D-OA01 4.3-10 Female

Accessories
Model Quantity Description
00-W331-5016 2 Mounting Kit
KK63020099 2 Hose Clamp, ∅30-125mm

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 241
DS-Control:1-0-1 / 1216
Wideband Reactive Power Splitter
PS-Rx-ON500C(XH)
x=2,3,4, preconfigured splitting way number
698-2700MHz, N-Female, 500W

Electrical Specifications

Parameters PS-R2-ON500C(XH) PS-R3-ON500C(XH) PS-R4-ON500C(XH)

Frequency Range (MHz) 698-2700

Splitting Loss (dB) 3.1 5.0 6.3
Insertion Loss (dB) ≤0.1
Input Port VSWR ≤1.20
Intermodulation Products (dBc) -153@2x43dBm
Input Average Power, Maximum (W) 500
Peak Power, Maximum (W) 1500
Impedance (Ω) 50

Mechanical Specifications
Dimensions, LxWxH (excluding connectors)
197x25x25 / 7.8x1.0x1.0 234x25x25 / 9.2x1.0x1.0 235x25x25 / 9.2x1.0x1.0
(mm) / (in)
Weight (kg) / (Ib) 0.35 / 0.77 0.41 / 0.90 0.47 / 1.10
Connector Type N-Female
Operational Temperature (°C) -40 to +60
Operational Humidity (%) ≤95
Shipping Dimensions, HxWxD (mm) / (in) 240x80x35 / 9.7x3.1x1.4 280x80x35 / 11.1x3.1x1.4 280x80x50 / 11.1x3.1x2.0
Shipping Weight (kg) / (Ib) 0.37 / 0.82 0.43 / 0.95 0.51 / 1.12
Environmental Class IP65

Photo & Outline Drawing

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering
Page 242
Specifications may differ depending on region and customers’ requirements.
DS-Control:3-0-3 / 1216
Wideband Reactive Power Splitter
PS-Rx-OD500C(XH)
x=2,3,4, preconfigured splitting way number
698-2700MHz, DIN-Female, 500W

Electrical Specifications

Parameters PS-R2-OD500C(XH) PS-R3-OD500C(XH) PS-R4-OD500C(XH)

Frequency Range (MHz) 698-2700

Splitting Loss (dB) 3.0 4.8 6.0
Insertion Loss (dB) ≤0.3
Input Port VSWR ≤1.22
Intermodulation Products (dBc) -153@2x43dBm
Input Average Power, Maximum (W) 500
Peak Power, Maximum (W) 1000
Impedance (Ω) 50

Mechanical Specifications
Dimensions, LxWxH (excluding connectors)
208x38x38 / 8.2x1.5x1.5 205x38x38 / 8.1x1.5x1.5 228x38x38 / 9.0x1.5x1.5
(mm) / (in)
Weight (kg) / (Ib) 1.1 / 2.4 1.2 / 2.6 1.3 / 2.9
Connector Type 7/16 DIN-Female
Operational Temperature (°C) -40 to +60
Operational Humidity (%) ≤95
Shipping Dimensions, HxWxD (mm) / (in) 240x86x43 / 9.4x3.4x1.7 258x86x43 / 10.2x3.4x1.7 281x85x43 / 11.1x3.4x1.7
Shipping Weight (kg) / (Ib) 1.2 / 2.6 1.3 / 2.9 1.4 / 3.1
Environmental Class IP65

Photo & Outline Drawing

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering
Page 243
Specifications may differ depending on region and customers’ requirements.
DS-Control:3-0-5 / 1216
Wideband Directional Coupler
DC-Rxx-ON300C(XH)
xx=05,06,07,08,10,13,15,20,30,40, preconfigured coupling value
698-2700MHz, N-Female, 300W

Electrical Specifications
DC-R05- DC-R06- DC-R07- DC-R08- DC-R10-
Parameters
ON300C(XH) ON300C(XH) ON300C(XH) ON300C(XH) ON300C(XH)

Frequency Range (MHz) 698-2700

Coupling Value (dB) 5 6 7 8 10
Coupling Tolerance (dB) ±0.8 ±0.8 ±0.8 ±0.8 ±0.8
Main Line Loss (dB) ≤2.1 ≤1.7 ≤1.4 ≤1.2 ≤0.7
Isolation (dB) ≥25 ≥26 ≥27 ≥28 ≥30
Input Port VSWR ≤1.25
Intermodulation Products (dBc) -153@2x43dBm
Input Average Power, Maximum (W) 300
Peak Power, Maximum (W) 1000
Impedance (Ω) 50

Electrical Specifications
DC-R13- DC-R15- DC-R20- DC-R30- DC-R40-
Parameters
ON300C(XH) ON300C(XH) ON300C(XH) ON300C(XH) ON300C(XH)

Frequency Range (MHz) 698-2700

Coupling Value (dB) 13 15 20 30 40
Coupling Tolerance (dB) ±1 ±1 ±1.2 ±1.5 ±1.5
Main Line Loss (dB) ≤0.5 ≤0.4 ≤0.3 ≤0.2 ≤0.2
Isolation (dB) ≥33 ≥35 ≥40 ≥45 ≥ 55
Input Port VSWR ≤1.25
Intermodulation Products (dBc) -153@2x43dBm
Input Average Power, Maximum (W) 300
Peak Power, Maximum (W) 1000
Impedance (Ω) 50

Mechanical Specifications
Dimensions, LxWxH (excluding connectors)
122x48x22 / 4.8x1.9x0.9
(mm) / (in)
Weight (kg) / (Ib) 0.3 / 0.7
Connector Type N-Female
Operational Temperature (°C) -40 to +60
Operational Humidity (%) ≤95
Shipping Dimensions, HxWxD (mm) / (in) 180x75x30 / 7.1x3.0x1.2
Shipping Weight (kg) / (Ib) 0.4 / 0.9
Environmental Class IP65

Photo & Outline Drawing

122±1,5
2,5±0,2

48±0,5

38±0,5 46±0,5 Φ
3
3

22±0,5

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 244
DS-Control:3-0-2 / 1216
Wideband Directional Coupler
DC-Rxx-OD500C(XH)
xx=05,06,07,08,10,13,15,20,30,40, preconfigured coupling value
698-2700MHz, DIN-Female, 500W

Electrical Specifications
DC-R05- DC-R06- DC-R07- DC-R08- DC-R10-
Parameters
OD500C(XH) OD500C(XH) OD500C(XH) OD500C(XH) OD500C(XH)

Frequency Range (MHz) 698-2700

Coupling Value (dB) 5 6 7 8 10
Coupling Tolerance (dB) ±0.8 ±0.8 ±0.8 ±0.8 ±0.8
Main Line Loss (dB) ≤2.1 ≤1.7 ≤1.4 ≤1.2 ≤0.7
Isolation (dB) ≥25 ≥26 ≥27 ≥28 ≥30
Input Port VSWR ≤1.25
Intermodulation Products (dBc) -153@2x43dBm
Input Average Power, Maximum (W) 500
Peak Power, Maximum (W) 1000
Impedance (Ω) 50

Electrical Specifications
DC-R13- DC-R15- DC-R20- DC-R30- DC-R40-
Parameters
OD500C(XH) OD500C(XH) OD500C(XH) OD500C(XH) OD500C(XH)

Frequency Range (MHz) 698-2700

Coupling Value (dB) 13 15 20 30 40
Coupling Tolerance (dB) ±1 ±1 ±1.2 ±1.5 ±1.5
Main Line Loss (dB) ≤0.5 ≤0.4 ≤0.3 ≤0.2 ≤0.2
Isolation (dB) ≥33 ≥35 ≥40 ≥45 ≥55
Input Port VSWR ≤1.25
Intermodulation Products (dBc) -153@2x43dBm
Input Average Power, Maximum (W) 500
Peak Power, Maximum (W) 1000
Impedance (Ω) 50

Mechanical Specifications
Dimensions, LxWxH (excluding connectors)
123x48x36 / 4.8x1.9x1.4
(mm) / (in)
Weight (kg) / (Ib) 0.7 / 1.5
Connector Type DIN-Female
Operational Temperature (°C) -40 to +60
Operational Humidity (%) ≤95
Shipping Dimensions, HxWxD (mm) / (in) 180x80x45 / 7.1x3.1x1.1
Shipping Weight (kg) / (Ib) 0.8 / 1.8
Environmental Class IP65

Photo & Outline Drawing

123±1,5
2,5±0,2

48±0,5

38,5±1 46±0,5
3

36±0,5

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering
Page 245
Specifications may differ depending on region and customers’ requirements.
DS-Control:3-0-3 / 1216
2-in-2-out Wideband Hybrid Coupler
HC-R-ON300L(XH)
698-2700MHz, N-Female, 300W

Electrical Specifications

Parameters HC-R-ON300L(XH)

Frequency Range (MHz) 698-2700

Insertion Loss (dB) ≤0.1
Coupling Value (dB) 3.1±0.5
Isolation between Ports (dB) ≥25
Input Port VSWR ≤1.25
Intermodulation Products (dBc) -153@2x43dBm
Input Average Power, Maximum (W) 300
Peak Power, Maximum (W) 1000
Impedance (Ω) 50

Mechanical Specifications
Dimensions, LxWxH (mm) / (in) 127x44x24 / 4.9x1.7x0.9
Weight (kg) / (Ib) 0.4 / 0.9
Connector Type N-Female
Operational Temperature (°C) -40 to +60
Operational Humidity (%) ≤95
Shipping Dimensions, HxWxD (mm) / (in) 163x87x35 / 6.4x3.4x1.4
Shipping Weight (kg) / (Ib) 0.5 / 1.1
Environmental Class IP65

Photo & Outline Drawing

IN IN

OUT OUT

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering
Page 246
Specifications may differ depending on region and customers’ requirements.
DS-Control:3-0-2 / 1216
2-in-2-out Wideband Hybrid Coupler
HC-R-OD500L(XH)
698-2700MHz, DIN-Female, 500W

Electrical Specifications

Parameters HC-R-OD500L(XH) HC-R-OD500L(XH)

Frequency Range (MHz) 698-2700

Insertion Loss (dB) ≤0.1
Coupling Value (dB) 3.1±0.5
Isolation between Ports (dB) ≥25
Input Port VSWR ≤1.25
Intermodulation Products (dBc) -153@2x43dBm
Input Average Power, Maximum (W) 500
Peak Power, Maximum (W) 1000
Impedance (Ω) 50

Mechanical Specifications
Dimensions, LxWxH (excluding connectors)
127x44x37 / 5.0x1.7x1.5
(mm) / (in)
Weight (kg) / (Ib) 0.9 / 2.0
Connector Type 7/16 DIN-Female
Operational Temperature (°C) -40 to +60
Operational Humidity (%) ≤95
Shipping Dimensions, HxWxD (mm) / (in) 170x100x40 / 6.7x3.9x1.6
Shipping Weight (kg) / (Ib) 1.1 / 2.4
Environmental Class IP65

Photo & Outline Drawing

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering
Page 247
Specifications may differ depending on region and customers’ requirements.
DS-Control:3-0-2 / 1216
4-in-4-out Wideband Hybrid Coupler
HC-R4-OD200L, HC-R4-ON200L
698-2700MHz, DIN-Female / N-Female, 200W

Electrical Specifications

Parameters HC-R4-OD200L HC-R4-ON200L

Frequency Range (MHz) 698-2700

Insertion Loss (dB) ≤0.5
Coupling Value (dB) 6.0±0.6
Isolation between Ports (dB) ≥23
≤1.22@698-2500MHz
Input Port VSWR
≤1.30@2500-2700MHz
Intermodulation Products (dBc) -150@2x43dBm
Input Average Power, Maximum (W) 200
Peak Power, Maximum (W) 800
Impedance (Ω) 50

Mechanical Specifications
Dimensions, LxWxH (excluding connectors)
250x100x60 / 9.8x3.9x2.4 250x100x54 / 9.8x3.9x2.1
(mm) / (in)
Weight (kg) / (Ib) 2.2 / 4.9 1.6 / 3.5
Connector Type 7/16 DIN-Female N-Female
Operational Temperature (°C) -40 to +60
Operational Humidity (%) ≤95
Shipping Dimensions, HxWxD One Unit 285x225x105 / 11.2x8.9x4.1
(mm) / (in) Ten Units 580x480x330 / 22.8x18.9x13.0
One Unit 2.6 / 5.7 2.0 / 4.4
Shipping Weight (kg) / (Ib)
Ten Units 24.8 / 54.7 18.8 / 41.4
Environmental Class IP65

Photo & Outline Drawing

DIN Connector Type for Reference

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering
Page 248
Specifications may differ depending on region and customers’ requirements.
DS-Control:1-0-4 / 1216
Modular Multi Operator Combiner
POI-CDG4IDN1
2xTetra Band 1x800MHz 4x900MHz 4x1800MHz 4x2100MHz

1x2300MHz

Electrical Specifications
TETRA1 806-824/851-869
Tetra Band
TETRA2 806-824/851-869
800MHZ Port1 825-840/870-885
Port1 890-915/935-960
Port2 890-915/935-960
900MHZ
Port3 890-915/935-960
Port4 890-915/935-960
Port1 1710-1785/1805-1880
-Input Port Information (MHz)
Port2 1710-1785/1805-1880
1800MHZ
Port3 1710-1785/1805-1880
Port4 1710-1785/1805-1880
Port1 1920-1980/2110-2170
Port2 1920-1980/2110-2170
2100MHZ
Port3 1920-1980/2110-2170
Port4 1920-1980/2110-2170
2300MHZ Port1 2300-2400
Insertion Loss (dB) 8.0
≥25 @same band
Isolation (dB) ≥25@Tetra / 800
≥80 @cross band
Return Loss (dB) ≥18
Monitor Port Coupling value (dB) 30±2
200(Avg.)
Maximum Input Per Power (W)
1000(Peak)
Intermodulation Products (dBc) ≤-155@2x43dBm
Impedance (Ω) 50

Mechanical Specifications
Dimensions, LxWxH (mm) / (in)
482x430x577 / 19.0x16.9x22.7
(excluding connectors & mounting bracket)

Weight (kg) / (lb) 58.0 / 127.9

Shipping Dimensions, LxWxH (mm) / (in) 830x680x760 / 32.7x26.8x29.9
Shipping Weight (kg) / (lb) 83.0 / 183.0
Input Ports 16 x 7/16” DIN-Female
RF Connectors Output Ports 4 x 7/16” DIN-Female
Mounting Ports 4 x N-Female
Mounting Floor Standing
Operating Temperature Range (°C) -10 to +60
Operational Humidity (%) ≤95
Environmental Class Indoor

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 249
DS-Control:3-0-1 / 1208
Modular Multi Operator Combiner
POI-CDG4IDN1
2xTetra Band 1x800MHz 4x900MHz 4x1800MHz 4x2100MHz

1x2300MHz

Block Diagram

Module 1
800 825-840/870-885
Common
890-915/935-960 Module
900-C
1710-1785/1805-1880
1800-C

2100-C 1920-1980/2110-2170

2300 2300-2400

Module 1
806-824/851-869
TETRA-1
890-915/935-960
900 - B
1710-1785/1805-1880
1800-B

1920-1980/2110-2170
2100-B

ANT1
Module 1 ANT2
806-824/851-869
TETRA-2
890-915/935-960
900- A ANT3
1710-1785/1805-1880 ANT4
1800-A

2100-A 1920-1980/2110-2170

Module 1
Load
890-915/935-960
900-D

1710-1785/1805-1880
1800-D
1920-1980/2110-2170
2100-D

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 250
DS-Control:3-0-1 / 1208
Modular Multi Operator Combiner
POI-CDJ2IDN1HK
3xGSM 900MHz 1xUMTS 800MHz 1xCDMA2000MHz 5xLTE 1800MHz 4xUMTS 2100MHz

4xLTE 2600MHz
Electrical Specifications
935.0-942.5/890.0-897.5
Port1
941.9-949.9/904.1-904.9
GSM 900 942.5-952.5/897.5-907.5
Port2
930-935/885-890
Port3 952.5-960.0/907.5-915.0
UMTS 800 Port1 877.5-882.5/832.5-837.5
CDMA2000 Port1 870-877.5/825.0-832.5
1808.7–1811.9/1713.7-1716.9
Port1
1813.5-1835.1/1718.5-1740.1
Port2 1835.1-1845.1/1740.1-1750.1
LTE 1800 Port3 1845.1-1855.1/1750.1-1760.1
-Input Port Information (MHz) Port4 1855.1-1865.1/1760.1-1770.1
Port5 1865.1–1876.7/1770.1-1781.7
Port1 2115.3 -2125.1/1925.3-1935.1
Port2 2125.1-2139.9/1935.1-1949.9
UMTS 2100 2110.3-2115.3/1920.3-1925.3
Port3
2140.1-2154.9/1950.1-1964.9
Port4 2154.9-2169.7/1964.9-1979.7
Port1 2500-2520/2620-2640
Port2 2520-2530/2640-2650
LTE 2600
Port3 2530-2550/2650-2670
Port4 2550-2570/2670-2690
6.0
Insertion Loss (dB)
7.0@949.1 - 949.9 & 952.5-960.0 Mhz
Isolation Between Bands(dB)
- In band TD-LTE2.3G ≥25
- Others ≥40
Isolation Cross Bands(dB)
- In band GSM900, UMTS850 &
≥45
CDMA2000
≥80
- Others
Return Loss (dB) ≥18
Maximum Input Per Power (W) 150
Intermodulation Products (dBc) ≤-155@2x43dBm
Impedance (Ω) 50

Mechanical Specifications
Dimensions, LxWxH (mm) / (in)
666x482x472 / 26.2 x19.0 x18.6
(excluding connectors & mounting bracket)

Weight (kg) / (lb) 82.5 / 182.0

Shipping Dimensions, LxWxH (mm) / (in) 860x610x840 / 33.9 x24.0 x33.1
Shipping Weight (kg) / (lb) 111.5 / 246.0
Input Ports 18 x 7/16” DIN-Female
RF Connectors Output Ports 2 x 7/16” DIN-Female
Monitoring Ports 2 x N-Female
19”Rack or Floor Stand for Top Side Ports or
Mounting
Wall Mount
Operating Temperature Range (°C) 10 to +55
Operational Humidity (%) < 95
Environmental Class Indoor

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 251
DS-Control:0-0-4 / 1226
Modular Multi Operator Combiner
POI-CDJ2IDN1HK
3xGSM 900MHz 1xUMTS 800MHz 1xCDMA2000MHz 5xLTE 1800MHz 4xUMTS 2100MHz

4xLTE 2600MHz
Block Diagram

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 252
DS-Control:0-0-4 / 1226
Modular Multi Operator Combiner
POI-CD62IDN2HK
2x2G/3G 4xLTE2.6G

Electrical Specifications
Port1 806-2390
2x2G/3G
Port2 806-2390
Port1 2500-2520/2620-2640
-Input Port Information (MHz)
Port2 2530-2550/2650-2670
LTE2.6G
Port3 2550-2570/2670-2690
Port4 2520-2530/2640-2650
Insertion Loss(dB)
1.0
-2G/3G
6.0
-LTE2.6G
Isolation Between Bands(dB) ≥40
Isolation Cross Bands(dB) ≥80
≥18 (BTS)
Return Loss (dB)
≥16(ANT)
Coupling Value(dB)(include insertion loss) 24±2
>500 @800-2400
Maximum Input Per Power (W)
>150 @2600
Intermodulation Products (dBc) ≤-155@2x43dBm
Impedance (Ω) 50

Mechanical Specifications
Dimensions, LxWxH (mm) / (in)
482x470x177 / 19.0x18.5x7.0
(excluding connectors & mounting bracket)

Weight (kg) / (lb) 25 / 51.2

Shipping Dimensions, LxWxH (mm) / (in) 715x665x280 / 28.1x26.2x11.0
Shipping Weight (kg) / (lb) 28 / 61.7
Input Ports 6 x 7/16” DIN-Female
Output Ports 2 x 7/16” DIN-Female
Connectors
Coupling Ports 2 x N-Female
Monitoring Ports 2 x N-Female
Signal Output at Coupling Port (dB) -24  2
Signal Output at Monitor Port (dB) -30  2
Mounting 19’ Rack
Operating Temperature Range (°C) 0 to +55
Operational Humidity (%) < 95
Environmental Class Indoor

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 253
DS-Control:1-0-3 / 1208
Modular Multi Operator Combiner
POI-CD62IDN2HK
2x2G/3G 4xLTE2.6G

Block Diagram

800-2390
2G/3G-1

2500-2520 MON1
LTE2.6G-1 2620-2640 ANT1

2530-2550
2650-2670 Coupling1
LTE2.6G-3

2550-2570 Coupling2
LTE2.6G-4 2670-2690

ANT2
2520-2530
LTE2.6G-2 2640-2650 MON2

800-2390
2G/3G-2

©Comba Telecom. All rights reserved

Information contained in this document is subject to confirmation at time of ordering.
Specifications may differ depending on region and customers’ requirements. Page 254
DS-Control:1-0-3 / 1208