Pasador

All your fastener needs from a single source
Product Dimensions and Weights DIN 94 /ISO 1234 Specifications
Metric DIN 94 Split Pins (Cotter Pins)
Nominal
Diameter 1 1.5 2 2.5 3.2 4 5 6.3 8 10 13
D Min 0.9 1.4 1.8 2.3 2.9 3.7 4.6 5.9 7.5 9.5 12.4
Max 0.8 1.3 1.7 2.1 2.7 3.5 4.4 5.7 7.3 9.3 12.1
A 1.6 2.5 2.5 2.5 3.2 4 4 4 4 6.3 6.3
B 3 3.2 4 5 6.4 8 10 12.6 16 20 26
C 1.6 2.4 3.2 4 5.1 6.5 8 10.3 13.1 16.6 1.7
All measurements are in mm
Aspen Fasteners 4807 Rockside Road, Suite 400, Independence, OH 44131 USA
www.aspenfasteners.com | aspensales@aspenfasteners.com | 1-800-479-0056
Headquarters: Independence OH USA; Montreal QC Canada;

Distribution Centers: Boston MA; Chicago IL; Cincinnati KY; Dallas TX; Denver CO; Houston TX; Jersey City NJ; Los Angeles CA; Miami FL;
San Francisco CA; Seattle WA; Washington VA; Toronto ON; Calgary AB; Vancouver BC; Jiutepec (Temixco); Mexico City; Monterrey
Nominal
Diameter 1 1.5 2 2.5 3.2 4 5 6.3 8 10 13
L (mm) Weight kg(s) / 1000 pcs
10 0.04 0.15 0.37

12 0.08 0.16 0.38 0.59 1.01 1.89
16 0.10 0.22 0.39 0.70 0.09 2.22
18 0.22 0.40 0.73 1.20 2.36
20 0.13 0.25 0.45 0.76 1.27 2.36
22 0.26 0.47 1.40 2.51
25 0.31 0.54 0.99 1.49 2.84
28 0.37 0.58 1.01 1.71 2.94 4.84
32 0.38 0.65 1.18 1.85 3.12 5.36 6.97
36 0.80 1.28 2.05 3.72 5.92 10.20
40 0.82 1.38 2.24 4.07 6.41 11.40 20.60
45 1.57 2.37 4.33 6.82 12.60 21.20
50 2.00 2.81 4.75 7.87 13.20 23.10
56 3.10 5.40 8.52 14.60 25.00 40.30
63 3.50 5.87 9.41 15.70 28.00 44.80
71 7.09 10.00 17.60 30.40 49.20
80 7.94 11.50 18.50 33.40 53.30
90 8.79 12.80 20.80 36.70 58.50 106.90
100 15.70 22.90 41.20 64.10 117.80
112 25.20 47.00 72.00 128.00
125 27.30 48.50 79.00 142.90
140 65.60 97.70 170.00
Metric DIN 94 Split Pins (Cotter Pins) are common used fasteners that hold assemblies together. Made of soft metal wire
looped on itself so the two resulting tines can be inserted into a pre-drilled hole and bent to keep it in place. Cotter pins are
typically made of soft metal allowing for easy installation and removal. However, this also makes them poor locking
devices when strong shear forces are expected. Aspen Fasteners offers over 500,000 unique fastener products from
stock in inch and metric standard in a variety of materials and finishes. The following sizes DIN 93 Single Tab Safety Lock
Washers are available for immediate shipping from stock: Diameters ranging from M1 to M13 up to 140mm long in steel
as well as stainless steel A2 and A4. View parts by clicking on the following link: Metric DIN 94 Split Pins (Cotter Pins)

DIN (Deutsches Institut für Normung - German Institute for Standardization) standards are issued for a variety of
components including industrial fasteners as Metric DIN 85 Slotted Pan Head Machine Screws. The DIN standards
remain common in Germany, Europe and globally even though the transition to ISO standards is taking place. DIN
standards continue to be used for parts which do not have ISO equivalents or for which there is no need for
standardizationThe ISO equivalent of DIN 94 Split Pins (Cotter Pins) is ISO 1234.
1) Mechanical properties of stainless steel for metric DIN 94 Split Pins (Cotter Pins)
Stainless steels can be divided into three groups of steel - austenitic, ferritic and martensitic. Austenitic steel is by far the
most common type (>90% of commercial fasteners). The steel groups and strength classes are designated by a four-digit
sequence of letters and numbers (eg A2-70) as shown in the following table. DIN EN ISO 3506 governs screws and nuts
made from stainless steel.
Screws, Nuts and Bolts
Tensile Tensile
Strength strength strength Dia range Nut Load
Steel group Steel grade N/mm2 PSI
class N/mm2
50 500 70,000 <=M39 500

Austenitic A2 and A4 70 700 100,000 <=M20 700
80 800 118,000 <=M20 800
The tensile stress is calculated with reference to the tensile stress area (see DIN EN ISO 3506-1979). Nuts to be paired with
same grade of stainless steel screws
Steel Property Made From Characteristics

group Strength
class
50 A1, A2 Soft; cold worked, turned and soft pressed fasteners
Austenitic 70 A2, A4 Cold worked, normal70,000
strength formed fasteners
fasteners
<=M39
80 A2, A4 Extreme cold worked, high strength, special applications
70,000
500
fasteners fasteners
<=M39
70,000
500
<=M39
500


2) Chemical composition of stainless steel metric DIN 94 Split Pins (Cotter Pins)
Grade USA Grade Material Material C Si Mn Cr Mo Ni

designation no. % ≤% ≤% % % %
17.5 8.0
≤
X 5Cr Ni 1810 1.4301 1.0 2.0 to - to
0.07
19.5 10.5
18.0 10
≤
A2 304 X 2 Cr Ni 1811 1.4306 1.0 2.0 to - to
0.03
20.0 12.0
17.0 11.0
≤
X 8 Cr Ni 19/10 1.4303 1.0 2.0 to - to
0.07
19.0 13.0
16.5 2.0 10.0
≤
X 5 Cr Ni Mo 1712 1.4401 1.0 2.0 to to to
0.07
18.5 2.5 13.0
A4 316
16.5 2.0 10
≤
X 2 Cr Ni Mo 1712 1.4404 1.0 2.0 to to to
0.03
18.5 2.5 13
3) Chemical composition of steel metric DIN 94 Split Pins (Cotter Pins)
CHEMICAL COMPOSITION LIMITS %

TEMPERING
PROPERTY
MATERIAL AND TREATMENT C P S TEMP ºC MIN.
CLASS
min. max. max. max.
4.6, 4.8, 5.8, 6.8 Low or medium carbon steel - 0.55 0.05 0.06 -
8.8 Medium carbon steel quenched, tempered 0.25 0.55 0.04 0.05 425
9.8 Medium carbon steel quenched, tempered 0.25 0.55 0.04 0.05 425
Medium carbon steel additives e.g. boron, Mn, Cr or
10.9 0.20 0.55 0.04 0.05 425
Alloy steel - quenched, tempered
12.9 Alloy steel - quenched, tempered 0.20 0.50 0.035 0.035 380

4) Mechanical properties of steel for metric DIN 94 Split Pins (Cotter Pins)
PROPERTY CLASS
8.8
MECHANICAL PROPERTY
4.8 5.6 5.8 6.8 Up to M Over M 9.8 10.9 12.9
16 16
Tensile Strength nom. 400 500 600 800 900 1000 1200
(Rm, N/mm²) min. 420 500 520 600 800 830 900 1040 1220
min. 130 155 160 190 250 255 290 320 385
Vickers Hardness
max 250 320 336 360 380 435
min. 124 147 152 181 319 242 266 295 353
Brinell Hardness
max. 238 385 319 342 363 412
min. HR 71 79 82 89 -
HRC - - - - 20 23 28 32 39
Rockwell Hardness
HR 95 99 -
max. HRC - - - - 32 34 37 39 44
Yield Stress ReL. nom. 320 300 400 480 -
N/mm² min. 340 300 420 480 -
Stress at permanent nom. - 640 720 900 1080
set limit N/mm² min. - 640 660 720 940 1100
Disclaimer
Dimensional data and technical information for Metric DIN 94 Split Pins (Cotter Pins) was obtained from publicly
available sources and not acquired through standards agencies. It has been completed and compiled for reference
purposes only; where discrepancies are found they are subject to change without notice. Aspen Fasteners makes no
warranties or representations regarding the accuracy and validity of the compiled information and data. Contact the
relevant standards authorities for accurate and detailed information.


Pasador

Uploaded by

Copyright:

Available Formats

Pasador

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Pasador

Uploaded by

Copyright:

Available Formats

All your fastener needs from a single source

Product Dimensions and Weights DIN 94 /ISO 1234 Specifications

Metric DIN 94 Split Pins (Cotter Pins)

All measurements are in mm

Headquarters: Independence OH USA; Montreal QC Canada;

10 0.04 0.15 0.37

Headquarters: Independence OH USA; Montreal QC Canada;

Screws, Nuts and Bolts

50 500 70,000 <=M39 500

Steel Property Made From Characteristics

Headquarters: Independence OH USA; Montreal QC Canada;

Headquarters: Independence OH USA; Montreal QC Canada;

Grade USA Grade Material Material C Si Mn Cr Mo Ni

3) Chemical composition of steel metric DIN 94 Split Pins (Cotter Pins)

CHEMICAL COMPOSITION LIMITS %

Headquarters: Independence OH USA; Montreal QC Canada;

Headquarters: Independence OH USA; Montreal QC Canada;

You might also like