Style Ss3: Widest Range 1.20"
Style Ss3: Widest Range 1.20"
com • 1-800-426-9341
MATERIAL SPECIFICATIONS
SHELLS AND LUGS: Stainless steel per ASTM A 240, type 304.
BOLTS: UNC rolled thread, stainless steel per ASTM A 193, type 304.
NUTS: Stainless steel per ASTM A 194, type 304.
REPAIR CLAMPS
WASHERS: Stainless steel per ASTM A 240, type 304 and plastic lubri-
cating washers.
GASKETS: SBR per ASTM D 2000 MAA 610. Compounded for water
and sewer service. Other compounds available on request.
11.04-12.24 SS3-12.24 x length $490.73 $657.06 $824.62 $1,111.93 $1,597.67 $1,624.60 $1,864.75 $2,709.78
12.40-13.60 SS3-13.60 x length 22# 27# 31# 41# 53# 61# 80# 94#
13.14-14.34 SS3-14.34 x length 562.24 729.99 936.16 1,187.47 1,643.57 1,802.97 2,099.81 2,831.03
13.45-14.65 SS3-14.65 x length 24# 29# 33# 43# 56# 65# 85# 99#
15.30-16.50 SS3-16.50 x length 742.69 1,118.84 1,152.78 1,495.14 1,986.34 2,078.91 3,057.45 3,481.41
17.10-18.30 SS3-18.30 x length 25# 30# 35# 45# 59# 72# 89# 103#
18.00-19.20 SS3-19.20 x length 838.54 1,145.38 1,217.57 1,524.78 2,067.25 2,555.88 3,237.14 3,592.30
19.50-20.70 SS3-20.70 x length 26# 32# 36# 49# 63# 76# 95# 112#
NUMBER OF BOLTS PER CLAMP LENGTH FOR TAPPED SS3 SEE PAGE 2-14.
OD RANGE 8" 10" 12" 16" 20" 24" 30" 36”
FOR SEWER O.D.S SEE PAGE 7-8.
All Ranges 9 9 12 15 21 24 30 36 For higher working pressures, clamp length should equal or exceed diameter
of pipe. Some sizes and lengths not listed are available on request.
Clamps are not to be used for joining plain end pipe.