Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 44 views

    Astm A53

    Uploaded by

    joseocsilva
    This document provides specifications for ASTM A53 Schedule 40 Grade A black and galvanized steel pipes. It lists nominal pipe sizes from 1/2" to 6" along with minimum and maximum dimensions, wall thicknesses, and weights. Additional requirements covered include tolerances on thickness and diameter, end finishes, internal deburring, chemical and mechanical properties, bend and flattening tests, leak tightness testing, black varnish or zinc coating, threading specifications, marking, packing, and the option to provide mill test certificates.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Astm A53

    Uploaded by

    joseocsilva
    44 views2 pages
    This document provides specifications for ASTM A53 Schedule 40 Grade A black and galvanized steel pipes. It lists nominal pipe sizes from 1/2" to 6" along with minimum and maximum dimensions, wall thicknesses, and weights. Additional requirements covered include tolerances on thickness and diameter, end finishes, internal deburring, chemical and mechanical properties, bend and flattening tests, leak tightness testing, black varnish or zinc coating, threading specifications, marking, packing, and the option to provide mill test certificates.

    Original Title

    ASTM_A-53-A Spec.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for ASTM A53 Schedule 40 Grade A black and galvanized steel pipes. It lists nominal pipe sizes from 1/2" to 6" along with minimum and maximum dimensions, wall thicknesses, and weights. Additional requirements covered include tolerances on thickness and diameter, end finishes, internal deburring, chemical and mechanical properties, bend and flattening tests, leak tightness testing, black varnish or zinc coating, threading specifications, marking, packing, and the option to provide mill test certificates.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    44 views2 pages

    Astm A53

    Uploaded by

    joseocsilva
    This document provides specifications for ASTM A53 Schedule 40 Grade A black and galvanized steel pipes. It lists nominal pipe sizes from 1/2" to 6" along with minimum and maximum dimensions, wall thicknesses, and weights. Additional requirements covered include tolerances on thickness and diameter, end finishes, internal deburring, chemical and mechanical properties, bend and flattening tests, leak tightness testing, black varnish or zinc coating, threading specifications, marking, packing, and the option to provide mill test certificates.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    ASTM A53

    SCHEDULE 40 GRADE A
    Outside Dia. of Black / Galvanized Tube Weight of Black / Galvanized Tube

    SIZE Minimum Maximum Wall thickness Plain Ends Screwed & Socketed Pieces
    INCH NB (mm) Inches mm Inches mm Inches mm lb./Ft. Kg./Mtr. lb./Ft. Kg./Mtr. per bundle
    1/2" 15 0.809 20.90 0.856 21.70 0.109 2.77 0.850 1.27 0.85 1.27 120
    3/4" 20 1.020 26.30 1.070 27.10 0.113 2.87 1.130 1.69 1.13 1.69 84
    1" 25 1.280 33.00 1.330 33.80 0.133 3.38 1.680 2.50 1.68 2.50 60
    1 1/4" 32 1.630 41.80 1.680 42.60 0.140 3.56 2.270 3.39 2.28 3.4 42
    1 1/2" 40 1.870 47.90 1.920 48.70 0.145 3.68 2.720 4.05 2.73 4.06 36
    2" 50 2.350 59.70 2.400 60.90 0.154 3.91 3.650 5.44 3.68 5.46 26
    2 1/2" 65 2.850 72.30 2.900 73.70 0.203 5.16 5.790 8.63 5.82 8.67 18
    3" 80 3.460 88.00 3.530 89.80 0.216 5.49 7.580 11.29 7.62 11.35 14
    31/2" 90 3.960 100.60 4.040 102.60 0.226 5.74 9.110 13.57 9.2 13.71 12
    4" 100 4.450 113.20 4.540 115.40 0.237 6.02 10.790 16.07 10.89 16.2 10
    5" 125 5.510 139.90 5.620 142.70 0.258 6.55 14.620 21.77 14.81 22.1 7
    6" 150 6.560 166.60 6.690 169.98 0.280 7.11 18.970 28.26 19.18 28.6 7

    1. TOLERANCE : a) On Thickness : The minimum wall thickness at any point shall be not more than 12.5% under the nominal
    wall thickness specified.
    : b) On Diameter :For NPS 11/2" & under at any point shall not vary more than +/- 0.4mm. For NPS 2" & above
    shall not vary more than +/-1% from the standard specified.
    : c) On Weight: The weight of the pipe shall not vary by more than +/- 10% of the specified value.

    2. ENDS : a) 11/2" and below size - End finish shall be at the option of manufacturer. Nominally square cut with the
    axis of tube and free from excessive burrs.
    : b) 2" and above size - Bevelled with ends bevelled to an angle of 30 degrees +5/-0 measured from a line
    perpendicular to the axis of the pipe with a root face of 1.6mm +/-0.8mm.

    3. INTERNAL DEBEADING : From size 2" & above internal beads can be completely removed.

    4. PROPERTIES :a) Chemical = (Maximum) C - 0.25%, Mn - 0.95%, S - 0.045% & P - 0.050%, Cu-0.40%, Ni-0.40%, Cr-0.40%,
    Mo-0.15%, V-0.08%, (Cu+Ni+Cr+Mo+V = 1.0% max)
    :b) Mechanical (Minimum) = UTS - 330 N/mm2, YS - 205 N/mm2 & %Elongation 25 to 30% .
    5. BEND TEST (COLD) : Applicable to tubes upto and including nominal size of 50mm.
    a) When ordered for close coiling bend upto 180 degrees around a cylindrical mandrel, the Dia of which is 8 times the OD of pipe.
    b) Bend upto 90 degree around a cylindrical mandrel, the dia of which is 12 times the OD of pipe .
    No cracks at any portion and no open in the weld.

    6. FLATTENING TEST (COLD) : Applicable to tubes greater than nominal size of 50mm weld located 0 / 90 degrees from the line of direction of force.
    a) During the 1st step, which is atest for ductility of the weld, no cracks or breaks in the inside or outside surfaces
    at the weld shall occur until the distance between the plates is less than two thirds of the specified diameter
    of the pipe.
    b) During the 2nd step, no cracks or breaks on the inside or outside surfaces away from the weld, shall occur until
    the distance between the plates is less than one third of the specified outside diameter of the pipe but is less than
    five times the wall thickness of the pipe.
    c) During the 3rd step, which is a test for soundness, flattening shall be continued until the test specimen breaks
    or the opposite walls of the pipe meet. Evidence of laminated or unsound material or of incomplete weld that is
    revealed by the flattening test shall be cause for rejection.

    7. LEAK TIGHTNESS TEST : a) Online NDT (Eddy current )


    b) Hydro test at a pressure of 700 PSI to 2500 PSI

    8. BLACK VARNISH : Tubes are uniformly varnished externally over their full lengths.

    9. ZINC COATING : Average 550 Gm/M2, but one side should not be less than 490 Gm/M2. Free from bare spots,black spots,
    (GALVANIZING) rough,overcoating,peel off or any other surface defects.

    10. THREADING : For 1/2" to 3/4" - 14 TPI, 1" to 2" - 11.5 TPI and 21/2" to 6" = 8 TPI.
    Check with standard ASTM ring and plug gauges.

    11. MARKING We can do online by stencilling as per this standard & as per customer needs at one meter interval.

    12 PACKING : Hexagonal type.

    13. MILL TEST CERTIFICATE :We can issue a MTC, certifying that the tubes supplied comply with this ASTM A 53 Standard.

    You might also like